i2c-s3c2410: Enable i2c clock only when doing some transfert

This patch modify the s3c2410 i2c driver behaviour to enable the
i2c clock only when needed. I'm not sure if this has a big impact
on power usage but at least it's fixing a bug with the uda1380
codec which needs to be hard reset'ed if the i2c clock is enabled
before it's powered on (at least on h1940).

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

drivers/i2c/busses/i2c-s3c2410.c

@@ -555,18 +555,23 @@ static int s3c24xx_i2c_xfer(struct i2c_adapter *adap,
 	int retry;
 	int ret;
 
+	clk_enable(i2c->clk);
+
 	for (retry = 0; retry < adap->retries; retry++) {
 
 		ret = s3c24xx_i2c_doxfer(i2c, msgs, num);
 
-		if (ret != -EAGAIN)
+		if (ret != -EAGAIN) {
+			clk_disable(i2c->clk);
 			return ret;
+		}
 
 		dev_dbg(i2c->dev, "Retrying transmission (%d)\n", retry);
 
 		udelay(100);
 	}
 
+	clk_disable(i2c->clk);
 	return -EREMOTEIO;
 }
 
@@ -911,6 +916,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, i2c);
 
 	dev_info(&pdev->dev, "%s: S3C I2C adapter\n", dev_name(&i2c->adap.dev));
+	clk_disable(i2c->clk);
 	return 0;
 
  err_cpufreq:
@@ -978,7 +984,9 @@ static int s3c24xx_i2c_resume(struct device *dev)
 	struct s3c24xx_i2c *i2c = platform_get_drvdata(pdev);
 
 	i2c->suspended = 0;
+	clk_enable(i2c->clk);
 	s3c24xx_i2c_init(i2c);
+	clk_disable(i2c->clk);
 
 	return 0;
 }