ARM: Kirkwood: Fix sparse warnings.

Mostly missing statics, but also missing include files
and void parameters.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

arch/arm/mach-kirkwood/board-dt.c

@@ -26,7 +26,7 @@ static struct of_device_id kirkwood_dt_match_table[] __initdata = {
 	{ }
 };
 
-struct of_dev_auxdata kirkwood_auxdata_lookup[] __initdata = {
+static struct of_dev_auxdata kirkwood_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL),
 	OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0",
 		       NULL),

arch/arm/mach-kirkwood/common.c

@@ -425,7 +425,7 @@ void __init kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data)
 /*****************************************************************************
  * SPI
  ****************************************************************************/
-void __init kirkwood_spi_init()
+void __init kirkwood_spi_init(void)
 {
 	orion_spi_init(SPI_PHYS_BASE);
 }

arch/arm/mach-kirkwood/irq.c

@@ -14,6 +14,7 @@
 #include <mach/bridge-regs.h>
 #include <plat/orion-gpio.h>
 #include <plat/irq.h>
+#include "common.h"
 
 static int __initdata gpio0_irqs[4] = {
 	IRQ_KIRKWOOD_GPIO_LOW_0_7,

arch/arm/mach-kirkwood/lacie_v2-common.c

@@ -19,6 +19,7 @@
 #include <mach/irqs.h>
 #include <plat/time.h>
 #include "common.h"
+#include "lacie_v2-common.h"
 
 /*****************************************************************************
  * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005)

arch/arm/mach-kirkwood/t5325-setup.c

@@ -29,7 +29,7 @@
 #include "common.h"
 #include "mpp.h"
 
-struct mtd_partition hp_t5325_partitions[] = {
+static struct mtd_partition hp_t5325_partitions[] = {
 	{
 		.name		= "u-boot env",
 		.size		= SZ_64K,
@@ -59,14 +59,14 @@ struct mtd_partition hp_t5325_partitions[] = {
 	},
 };
 
-const struct flash_platform_data hp_t5325_flash = {
+static const struct flash_platform_data hp_t5325_flash = {
 	.type		= "mx25l8005",
 	.name		= "spi_flash",
 	.parts		= hp_t5325_partitions,
 	.nr_parts	= ARRAY_SIZE(hp_t5325_partitions),
 };
 
-struct spi_board_info __initdata hp_t5325_spi_slave_info[] = {
+static struct spi_board_info __initdata hp_t5325_spi_slave_info[] = {
 	{
 		.modalias	= "m25p80",
 		.platform_data	= &hp_t5325_flash,

arch/arm/mach-kirkwood/tsx1x-common.c

@@ -7,6 +7,7 @@
 #include <linux/serial_reg.h>
 #include <mach/kirkwood.h>
 #include "common.h"
+#include "tsx1x-common.h"
 
 /*
  * QNAP TS-x1x Boards flash
@@ -29,7 +30,7 @@
  *
  ***************************************************************************/
 
-struct mtd_partition qnap_tsx1x_partitions[] = {
+static struct mtd_partition qnap_tsx1x_partitions[] = {
 	{
 		.name		= "U-Boot",
 		.size		= 0x00080000,
@@ -58,14 +59,14 @@ struct mtd_partition qnap_tsx1x_partitions[] = {
 	},
 };
 
-const struct flash_platform_data qnap_tsx1x_flash = {
+static const struct flash_platform_data qnap_tsx1x_flash = {
 	.type		= "m25p128",
 	.name		= "spi_flash",
 	.parts		= qnap_tsx1x_partitions,
 	.nr_parts	= ARRAY_SIZE(qnap_tsx1x_partitions),
 };
 
-struct spi_board_info __initdata qnap_tsx1x_spi_slave_info[] = {
+static struct spi_board_info __initdata qnap_tsx1x_spi_slave_info[] = {
 	{
 		.modalias	= "m25p80",
 		.platform_data	= &qnap_tsx1x_flash,