davinci: update DM644x support in preparation for more SoCs

Rework DM644x code into SoC specific and board specific parts.
This is also to generalize the structure a bit so it's easier to add
support for new SoCs in the DaVinci family.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

arch/arm/mach-davinci/Kconfig

@@ -4,19 +4,18 @@ menu "TI DaVinci Implementations"
 
 comment "DaVinci Core Type"
 
-config ARCH_DAVINCI644x
-	default y
+config ARCH_DAVINCI_DM644x
 	bool "DaVinci 644x based system"
 
 comment "DaVinci Board Type"
 
 config MACH_DAVINCI_EVM
-	bool "TI DaVinci EVM"
+	bool "TI DM644x EVM"
 	default y
-	depends on ARCH_DAVINCI644x
+	depends on ARCH_DAVINCI_DM644x
 	help
 	  Configure this option to specify the whether the board used
-	  for development is a DaVinci EVM
+	  for development is a DM644x EVM
 
 
 config DAVINCI_MUX

arch/arm/mach-davinci/Makefile

@@ -9,5 +9,8 @@ obj-y 			:= time.o irq.o clock.o serial.o io.o id.o psc.o \
 
 obj-$(CONFIG_DAVINCI_MUX)		+= mux.o
 
+# Chip specific
+obj-$(CONFIG_ARCH_DAVINCI_DM644x)       += dm644x.o
+
 # Board specific
-obj-$(CONFIG_MACH_DAVINCI_EVM)  += board-evm.o
+obj-$(CONFIG_MACH_DAVINCI_EVM)  	+= board-dm644x-evm.o

arch/arm/mach-davinci/board-dm644x-evm.c

@@ -15,15 +15,19 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
+#include <linux/memory.h>
 
 #include <linux/i2c.h>
 #include <linux/i2c/pcf857x.h>
 #include <linux/i2c/at24.h>
-
+#include <linux/etherdevice.h>
 #include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <linux/io.h>
+#include <linux/phy.h>
+#include <linux/clk.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -32,28 +36,34 @@
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <mach/hardware.h>
+#include <mach/dm644x.h>
 #include <mach/common.h>
 #include <mach/i2c.h>
+#include <mach/serial.h>
+#include <mach/mux.h>
+#include <mach/psc.h>
+#include <mach/nand.h>
+
+#define DM644X_EVM_PHY_MASK		(0x2)
+#define DM644X_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
 
 #define DAVINCI_CFC_ATA_BASE		  0x01C66000
-#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE  0x02000000
 
-/* other misc. init functions */
-void __init davinci_psc_init(void);
-void __init davinci_irq_init(void);
-void __init davinci_map_common_io(void);
-void __init davinci_init_common_hw(void);
+#define DAVINCI_ASYNC_EMIF_CONTROL_BASE   0x01e00000
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE  0x02000000
+#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE  0x04000000
+#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE  0x06000000
+#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE  0x08000000
 
-#if defined(CONFIG_MTD_PHYSMAP) || \
-    defined(CONFIG_MTD_PHYSMAP_MODULE)
+#define LXT971_PHY_ID	(0x001378e2)
+#define LXT971_PHY_MASK	(0xfffffff0)
 
 static struct mtd_partition davinci_evm_norflash_partitions[] = {
-	/* bootloader (U-Boot, etc) in first 4 sectors */
+	/* bootloader (UBL, U-Boot, etc) in first 5 sectors */
 	{
 		.name		= "bootloader",
 		.offset		= 0,
-		.size		= 4 * SZ_64K,
+		.size		= 5 * SZ_64K,
 		.mask_flags	= MTD_WRITEABLE, /* force read-only */
 	},
 	/* bootloader params in the next 1 sectors */
@@ -103,10 +113,60 @@ static struct platform_device davinci_evm_norflash_device = {
 	.resource	= &davinci_evm_norflash_resource,
 };
 
-#endif
+struct mtd_partition davinci_evm_nandflash_partition[] = {
+	/* 5 MB space at the beginning for bootloader and kernel */
+	{
+		.name		= "NAND filesystem",
+		.offset		= 5 * SZ_1M,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0,
+	}
+};
 
-#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
-    defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
+static struct davinci_nand_pdata davinci_evm_nandflash_data = {
+	.parts		= davinci_evm_nandflash_partition,
+	.nr_parts	= ARRAY_SIZE(davinci_evm_nandflash_partition),
+	.ecc_mode	= NAND_ECC_HW,
+};
+
+static struct resource davinci_evm_nandflash_resource[] = {
+	{
+		.start		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
+		.end		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= DAVINCI_ASYNC_EMIF_CONTROL_BASE,
+		.end		= DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device davinci_evm_nandflash_device = {
+	.name		= "davinci_nand",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &davinci_evm_nandflash_data,
+	},
+	.num_resources	= ARRAY_SIZE(davinci_evm_nandflash_resource),
+	.resource	= davinci_evm_nandflash_resource,
+};
+
+static u64 davinci_fb_dma_mask = DMA_32BIT_MASK;
+
+static struct platform_device davinci_fb_device = {
+	.name		= "davincifb",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= &davinci_fb_dma_mask,
+		.coherent_dma_mask      = DMA_32BIT_MASK,
+	},
+	.num_resources = 0,
+};
+
+static struct platform_device rtc_dev = {
+	.name           = "rtc_davinci_evm",
+	.id             = -1,
+};
 
 static struct resource ide_resources[] = {
 	{
@@ -121,7 +181,7 @@ static struct resource ide_resources[] = {
 	},
 };
 
-static u64 ide_dma_mask = DMA_BIT_MASK(32);
+static u64 ide_dma_mask = DMA_32BIT_MASK;
 
 static struct platform_device ide_dev = {
 	.name           = "palm_bk3710",
@@ -130,12 +190,10 @@ static struct platform_device ide_dev = {
 	.num_resources  = ARRAY_SIZE(ide_resources),
 	.dev = {
 		.dma_mask		= &ide_dma_mask,
-		.coherent_dma_mask      = DMA_BIT_MASK(32),
+		.coherent_dma_mask      = DMA_32BIT_MASK,
 	},
 };
 
-#endif
-
 /*----------------------------------------------------------------------*/
 
 /*
@@ -314,7 +372,9 @@ evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
 	gpio_request(gpio + 7, "nCF_SEL");
 	gpio_direction_output(gpio + 7, 1);
 
-	/* irlml6401 sustains over 3A, switches 5V in under 8 msec */
+	/* irlml6401 switches over 1A, in under 8 msec;
+	 * now it can be managed by nDRV_VBUS ...
+	 */
 	setup_usb(500, 8);
 
 	return 0;
@@ -346,13 +406,119 @@ static struct pcf857x_platform_data pcf_data_u35 = {
  *  - 0x0039, 1 byte NTSC vs PAL (bit 0x80 == PAL)
  *  - ... newer boards may have more
  */
+static struct memory_accessor *at24_mem_acc;
+
+static void at24_setup(struct memory_accessor *mem_acc, void *context)
+{
+	DECLARE_MAC_BUF(mac_str);
+	char mac_addr[6];
+
+	at24_mem_acc = mem_acc;
+
+	/* Read MAC addr from EEPROM */
+	if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x7f00, 6) == 6) {
+		printk(KERN_INFO "Read MAC addr from EEPROM: %s\n",
+		       print_mac(mac_str, mac_addr));
+	}
+}
+
 static struct at24_platform_data eeprom_info = {
 	.byte_len	= (256*1024) / 8,
 	.page_size	= 64,
 	.flags		= AT24_FLAG_ADDR16,
+	.setup          = at24_setup,
+};
+
+int dm6446evm_eeprom_read(void *buf, off_t off, size_t count)
+{
+	if (at24_mem_acc)
+		return at24_mem_acc->read(at24_mem_acc, buf, off, count);
+	return -ENODEV;
+}
+EXPORT_SYMBOL(dm6446evm_eeprom_read);
+
+int dm6446evm_eeprom_write(void *buf, off_t off, size_t count)
+{
+	if (at24_mem_acc)
+		return at24_mem_acc->write(at24_mem_acc, buf, off, count);
+	return -ENODEV;
+}
+EXPORT_SYMBOL(dm6446evm_eeprom_write);
+
+/*
+ * MSP430 supports RTC, card detection, input from IR remote, and
+ * a bit more.  It triggers interrupts on GPIO(7) from pressing
+ * buttons on the IR remote, and for card detect switches.
+ */
+static struct i2c_client *dm6446evm_msp;
+
+static int dm6446evm_msp_probe(struct i2c_client *client,
+		const struct i2c_device_id *id)
+{
+	dm6446evm_msp = client;
+	return 0;
+}
+
+static int dm6446evm_msp_remove(struct i2c_client *client)
+{
+	dm6446evm_msp = NULL;
+	return 0;
+}
+
+static const struct i2c_device_id dm6446evm_msp_ids[] = {
+	{ "dm6446evm_msp", 0, },
+	{ /* end of list */ },
+};
+
+static struct i2c_driver dm6446evm_msp_driver = {
+	.driver.name	= "dm6446evm_msp",
+	.id_table	= dm6446evm_msp_ids,
+	.probe		= dm6446evm_msp_probe,
+	.remove		= dm6446evm_msp_remove,
 };
 
+static int dm6444evm_msp430_get_pins(void)
+{
+	static const char txbuf[2] = { 2, 4, };
+	char buf[4];
+	struct i2c_msg msg[2] = {
+		{
+			.addr = dm6446evm_msp->addr,
+			.flags = 0,
+			.len = 2,
+			.buf = (void __force *)txbuf,
+		},
+		{
+			.addr = dm6446evm_msp->addr,
+			.flags = I2C_M_RD,
+			.len = 4,
+			.buf = buf,
+		},
+	};
+	int status;
+
+	if (!dm6446evm_msp)
+		return -ENXIO;
+
+	/* Command 4 == get input state, returns port 2 and port3 data
+	 *   S Addr W [A] len=2 [A] cmd=4 [A]
+	 *   RS Addr R [A] [len=4] A [cmd=4] A [port2] A [port3] N P
+	 */
+	status = i2c_transfer(dm6446evm_msp->adapter, msg, 2);
+	if (status < 0)
+		return status;
+
+	dev_dbg(&dm6446evm_msp->dev,
+		"PINS: %02x %02x %02x %02x\n",
+		buf[0], buf[1], buf[2], buf[3]);
+
+	return (buf[3] << 8) | buf[2];
+}
+
 static struct i2c_board_info __initdata i2c_info[] =  {
+	{
+		I2C_BOARD_INFO("dm6446evm_msp", 0x23),
+	},
 	{
 		I2C_BOARD_INFO("pcf8574", 0x38),
 		.platform_data	= &pcf_data_u2,
@@ -371,7 +537,6 @@ static struct i2c_board_info __initdata i2c_info[] =  {
 	},
 	/* ALSO:
 	 * - tvl320aic33 audio codec (0x1b)
-	 * - msp430 microcontroller (0x23)
 	 * - tvp5146 video decoder (0x5d)
 	 */
 };
@@ -387,40 +552,101 @@ static struct davinci_i2c_platform_data i2c_pdata = {
 static void __init evm_init_i2c(void)
 {
 	davinci_init_i2c(&i2c_pdata);
+	i2c_add_driver(&dm6446evm_msp_driver);
 	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
 }
 
 static struct platform_device *davinci_evm_devices[] __initdata = {
-#if defined(CONFIG_MTD_PHYSMAP) || \
-    defined(CONFIG_MTD_PHYSMAP_MODULE)
-	&davinci_evm_norflash_device,
-#endif
-#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
-    defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
-	&ide_dev,
-#endif
+	&davinci_fb_device,
+	&rtc_dev,
+};
+
+static struct davinci_uart_config uart_config __initdata = {
+	.enabled_uarts = (1 << 0),
 };
 
 static void __init
 davinci_evm_map_io(void)
 {
 	davinci_map_common_io();
+	dm644x_init();
 }
 
-static __init void davinci_evm_init(void)
+static int davinci_phy_fixup(struct phy_device *phydev)
 {
+	unsigned int control;
+	/* CRITICAL: Fix for increasing PHY signal drive strength for
+	 * TX lockup issue. On DaVinci EVM, the Intel LXT971 PHY
+	 * signal strength was low causing  TX to fail randomly. The
+	 * fix is to Set bit 11 (Increased MII drive strength) of PHY
+	 * register 26 (Digital Config register) on this phy. */
+	control = phy_read(phydev, 26);
+	phy_write(phydev, 26, (control | 0x800));
+	return 0;
+}
+
 #if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
     defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
+#define HAS_ATA 1
+#else
+#define HAS_ATA 0
+#endif
+
 #if defined(CONFIG_MTD_PHYSMAP) || \
     defined(CONFIG_MTD_PHYSMAP_MODULE)
-	printk(KERN_WARNING "WARNING: both IDE and NOR flash are enabled, "
-	       "but share pins.\n\t Disable IDE for NOR support.\n");
+#define HAS_NOR 1
+#else
+#define HAS_NOR 0
 #endif
+
+#if defined(CONFIG_MTD_NAND_DAVINCI) || \
+    defined(CONFIG_MTD_NAND_DAVINCI_MODULE)
+#define HAS_NAND 1
+#else
+#define HAS_NAND 0
 #endif
 
+static __init void davinci_evm_init(void)
+{
+	struct clk *aemif_clk;
+
+	aemif_clk = clk_get(NULL, "aemif");
+	clk_enable(aemif_clk);
+
+	if (HAS_ATA) {
+		if (HAS_NAND || HAS_NOR)
+			pr_warning("WARNING: both IDE and Flash are "
+				"enabled, but they share AEMIF pins.\n"
+				"\tDisable IDE for NAND/NOR support.\n");
+		davinci_cfg_reg(DM644X_HPIEN_DISABLE);
+		davinci_cfg_reg(DM644X_ATAEN);
+		davinci_cfg_reg(DM644X_HDIREN);
+		platform_device_register(&ide_dev);
+	} else if (HAS_NAND || HAS_NOR) {
+		davinci_cfg_reg(DM644X_HPIEN_DISABLE);
+		davinci_cfg_reg(DM644X_ATAEN_DISABLE);
+
+		/* only one device will be jumpered and detected */
+		if (HAS_NAND) {
+			platform_device_register(&davinci_evm_nandflash_device);
+			evm_leds[7].default_trigger = "nand-disk";
+			if (HAS_NOR)
+				pr_warning("WARNING: both NAND and NOR flash "
+					"are enabled; disable one of them.\n");
+		} else if (HAS_NOR)
+			platform_device_register(&davinci_evm_norflash_device);
+	}
+
 	platform_add_devices(davinci_evm_devices,
 			     ARRAY_SIZE(davinci_evm_devices));
 	evm_init_i2c();
+
+	davinci_serial_init(&uart_config);
+
+	/* Register the fixup for PHY on DaVinci */
+	phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK,
+					davinci_phy_fixup);
+
 }
 
 static __init void davinci_evm_irq_init(void)
@@ -428,7 +654,7 @@ static __init void davinci_evm_irq_init(void)
 	davinci_irq_init();
 }
 
-MACHINE_START(DAVINCI_EVM, "DaVinci EVM")
+MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
 	/* Maintainer: MontaVista Software <source@mvista.com> */
 	.phys_io      = IO_PHYS,
 	.io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,

arch/arm/mach-davinci/dm644x.c

@@ -0,0 +1,461 @@
+/*
+ * TI DaVinci DM644x chip specific setup
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include <mach/dm644x.h>
+#include <mach/clock.h>
+#include <mach/cputype.h>
+#include <mach/edma.h>
+#include <mach/irqs.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
+
+#include "clock.h"
+#include "mux.h"
+
+/*
+ * Device specific clocks
+ */
+#define DM644X_REF_FREQ		27000000
+
+static struct pll_data pll1_data = {
+	.num       = 1,
+	.phys_base = DAVINCI_PLL1_BASE,
+};
+
+static struct pll_data pll2_data = {
+	.num       = 2,
+	.phys_base = DAVINCI_PLL2_BASE,
+};
+
+static struct clk ref_clk = {
+	.name = "ref_clk",
+	.rate = DM644X_REF_FREQ,
+};
+
+static struct clk pll1_clk = {
+	.name = "pll1",
+	.parent = &ref_clk,
+	.pll_data = &pll1_data,
+	.flags = CLK_PLL,
+};
+
+static struct clk pll1_sysclk1 = {
+	.name = "pll1_sysclk1",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV1,
+};
+
+static struct clk pll1_sysclk2 = {
+	.name = "pll1_sysclk2",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV2,
+};
+
+static struct clk pll1_sysclk3 = {
+	.name = "pll1_sysclk3",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV3,
+};
+
+static struct clk pll1_sysclk5 = {
+	.name = "pll1_sysclk5",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV5,
+};
+
+static struct clk pll1_aux_clk = {
+	.name = "pll1_aux_clk",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL | PRE_PLL,
+};
+
+static struct clk pll1_sysclkbp = {
+	.name = "pll1_sysclkbp",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL | PRE_PLL,
+	.div_reg = BPDIV
+};
+
+static struct clk pll2_clk = {
+	.name = "pll2",
+	.parent = &ref_clk,
+	.pll_data = &pll2_data,
+	.flags = CLK_PLL,
+};
+
+static struct clk pll2_sysclk1 = {
+	.name = "pll2_sysclk1",
+	.parent = &pll2_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV1,
+};
+
+static struct clk pll2_sysclk2 = {
+	.name = "pll2_sysclk2",
+	.parent = &pll2_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV2,
+};
+
+static struct clk pll2_sysclkbp = {
+	.name = "pll2_sysclkbp",
+	.parent = &pll2_clk,
+	.flags = CLK_PLL | PRE_PLL,
+	.div_reg = BPDIV
+};
+
+static struct clk dsp_clk = {
+	.name = "dsp",
+	.parent = &pll1_sysclk1,
+	.lpsc = DAVINCI_LPSC_GEM,
+	.flags = PSC_DSP,
+	.usecount = 1,			/* REVISIT how to disable? */
+};
+
+static struct clk arm_clk = {
+	.name = "arm",
+	.parent = &pll1_sysclk2,
+	.lpsc = DAVINCI_LPSC_ARM,
+	.flags = ALWAYS_ENABLED,
+};
+
+static struct clk vicp_clk = {
+	.name = "vicp",
+	.parent = &pll1_sysclk2,
+	.lpsc = DAVINCI_LPSC_IMCOP,
+	.flags = PSC_DSP,
+	.usecount = 1,			/* REVISIT how to disable? */
+};
+
+static struct clk vpss_master_clk = {
+	.name = "vpss_master",
+	.parent = &pll1_sysclk3,
+	.lpsc = DAVINCI_LPSC_VPSSMSTR,
+	.flags = CLK_PSC,
+};
+
+static struct clk vpss_slave_clk = {
+	.name = "vpss_slave",
+	.parent = &pll1_sysclk3,
+	.lpsc = DAVINCI_LPSC_VPSSSLV,
+};
+
+static struct clk uart0_clk = {
+	.name = "uart0",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_UART0,
+};
+
+static struct clk uart1_clk = {
+	.name = "uart1",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_UART1,
+};
+
+static struct clk uart2_clk = {
+	.name = "uart2",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_UART2,
+};
+
+static struct clk emac_clk = {
+	.name = "emac",
+	.parent = &pll1_sysclk5,
+	.lpsc = DAVINCI_LPSC_EMAC_WRAPPER,
+};
+
+static struct clk i2c_clk = {
+	.name = "i2c",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_I2C,
+};
+
+static struct clk ide_clk = {
+	.name = "ide",
+	.parent = &pll1_sysclk5,
+	.lpsc = DAVINCI_LPSC_ATA,
+};
+
+static struct clk asp_clk = {
+	.name = "asp0",
+	.parent = &pll1_sysclk5,
+	.lpsc = DAVINCI_LPSC_McBSP,
+};
+
+static struct clk mmcsd_clk = {
+	.name = "mmcsd",
+	.parent = &pll1_sysclk5,
+	.lpsc = DAVINCI_LPSC_MMC_SD,
+};
+
+static struct clk spi_clk = {
+	.name = "spi",
+	.parent = &pll1_sysclk5,
+	.lpsc = DAVINCI_LPSC_SPI,
+};
+
+static struct clk gpio_clk = {
+	.name = "gpio",
+	.parent = &pll1_sysclk5,
+	.lpsc = DAVINCI_LPSC_GPIO,
+};
+
+static struct clk usb_clk = {
+	.name = "usb",
+	.parent = &pll1_sysclk5,
+	.lpsc = DAVINCI_LPSC_USB,
+};
+
+static struct clk vlynq_clk = {
+	.name = "vlynq",
+	.parent = &pll1_sysclk5,
+	.lpsc = DAVINCI_LPSC_VLYNQ,
+};
+
+static struct clk aemif_clk = {
+	.name = "aemif",
+	.parent = &pll1_sysclk5,
+	.lpsc = DAVINCI_LPSC_AEMIF,
+};
+
+static struct clk pwm0_clk = {
+	.name = "pwm0",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_PWM0,
+};
+
+static struct clk pwm1_clk = {
+	.name = "pwm1",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_PWM1,
+};
+
+static struct clk pwm2_clk = {
+	.name = "pwm2",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_PWM2,
+};
+
+static struct clk timer0_clk = {
+	.name = "timer0",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_TIMER0,
+};
+
+static struct clk timer1_clk = {
+	.name = "timer1",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_TIMER1,
+};
+
+static struct clk timer2_clk = {
+	.name = "timer2",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_TIMER2,
+	.usecount = 1,              /* REVISIT: why cant' this be disabled? */
+};
+
+struct davinci_clk dm644x_clks[] = {
+	CLK(NULL, "ref", &ref_clk),
+	CLK(NULL, "pll1", &pll1_clk),
+	CLK(NULL, "pll1_sysclk1", &pll1_sysclk1),
+	CLK(NULL, "pll1_sysclk2", &pll1_sysclk2),
+	CLK(NULL, "pll1_sysclk3", &pll1_sysclk3),
+	CLK(NULL, "pll1_sysclk5", &pll1_sysclk5),
+	CLK(NULL, "pll1_aux", &pll1_aux_clk),
+	CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp),
+	CLK(NULL, "pll2", &pll2_clk),
+	CLK(NULL, "pll2_sysclk1", &pll2_sysclk1),
+	CLK(NULL, "pll2_sysclk2", &pll2_sysclk2),
+	CLK(NULL, "pll2_sysclkbp", &pll2_sysclkbp),
+	CLK(NULL, "dsp", &dsp_clk),
+	CLK(NULL, "arm", &arm_clk),
+	CLK(NULL, "vicp", &vicp_clk),
+	CLK(NULL, "vpss_master", &vpss_master_clk),
+	CLK(NULL, "vpss_slave", &vpss_slave_clk),
+	CLK(NULL, "arm", &arm_clk),
+	CLK(NULL, "uart0", &uart0_clk),
+	CLK(NULL, "uart1", &uart1_clk),
+	CLK(NULL, "uart2", &uart2_clk),
+	CLK("davinci_emac.1", NULL, &emac_clk),
+	CLK("i2c_davinci.1", NULL, &i2c_clk),
+	CLK("palm_bk3710", NULL, &ide_clk),
+	CLK("soc-audio.0", NULL, &asp_clk),
+	CLK("davinci_mmc.0", NULL, &mmcsd_clk),
+	CLK(NULL, "spi", &spi_clk),
+	CLK(NULL, "gpio", &gpio_clk),
+	CLK(NULL, "usb", &usb_clk),
+	CLK(NULL, "vlynq", &vlynq_clk),
+	CLK(NULL, "aemif", &aemif_clk),
+	CLK(NULL, "pwm0", &pwm0_clk),
+	CLK(NULL, "pwm1", &pwm1_clk),
+	CLK(NULL, "pwm2", &pwm2_clk),
+	CLK(NULL, "timer0", &timer0_clk),
+	CLK(NULL, "timer1", &timer1_clk),
+	CLK("watchdog", NULL, &timer2_clk),
+	CLK(NULL, NULL, NULL),
+};
+
+#if defined(CONFIG_TI_DAVINCI_EMAC) || defined(CONFIG_TI_DAVINCI_EMAC_MODULE)
+
+static struct resource dm644x_emac_resources[] = {
+	{
+		.start	= DM644X_EMAC_BASE,
+		.end	= DM644X_EMAC_BASE + 0x47ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_EMACINT,
+		.end   = IRQ_EMACINT,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dm644x_emac_device = {
+       .name		= "davinci_emac",
+       .id		= 1,
+       .num_resources	= ARRAY_SIZE(dm644x_emac_resources),
+       .resource	= dm644x_emac_resources,
+};
+
+#endif
+
+/*
+ * Device specific mux setup
+ *
+ *	soc	description	mux  mode   mode  mux	 dbg
+ *				reg  offset mask  mode
+ */
+static const struct mux_config dm644x_pins[] = {
+MUX_CFG(DM644X, HDIREN,		0,   16,    1,	  1,	 true)
+MUX_CFG(DM644X, ATAEN,		0,   17,    1,	  1,	 true)
+MUX_CFG(DM644X, ATAEN_DISABLE,	0,   17,    1,	  0,	 true)
+
+MUX_CFG(DM644X, HPIEN_DISABLE,	0,   29,    1,	  0,	 true)
+
+MUX_CFG(DM644X, AEAW,		0,   0,     31,	  31,	 true)
+
+MUX_CFG(DM644X, MSTK,		1,   9,     1,	  0,	 false)
+
+MUX_CFG(DM644X, I2C,		1,   7,     1,	  1,	 false)
+
+MUX_CFG(DM644X, MCBSP,		1,   10,    1,	  1,	 false)
+
+MUX_CFG(DM644X, UART1,		1,   1,     1,	  1,	 true)
+MUX_CFG(DM644X, UART2,		1,   2,     1,	  1,	 true)
+
+MUX_CFG(DM644X, PWM0,		1,   4,     1,	  1,	 false)
+
+MUX_CFG(DM644X, PWM1,		1,   5,     1,	  1,	 false)
+
+MUX_CFG(DM644X, PWM2,		1,   6,     1,	  1,	 false)
+
+MUX_CFG(DM644X, VLYNQEN,	0,   15,    1,	  1,	 false)
+MUX_CFG(DM644X, VLSCREN,	0,   14,    1,	  1,	 false)
+MUX_CFG(DM644X, VLYNQWD,	0,   12,    3,	  3,	 false)
+
+MUX_CFG(DM644X, EMACEN,		0,   31,    1,	  1,	 true)
+
+MUX_CFG(DM644X, GPIO3V,		0,   31,    1,	  0,	 true)
+
+MUX_CFG(DM644X, GPIO0,		0,   24,    1,	  0,	 true)
+MUX_CFG(DM644X, GPIO3,		0,   25,    1,	  0,	 false)
+MUX_CFG(DM644X, GPIO43_44,	1,   7,     1,	  0,	 false)
+MUX_CFG(DM644X, GPIO46_47,	0,   22,    1,	  0,	 true)
+
+MUX_CFG(DM644X, RGB666,		0,   22,    1,	  1,	 true)
+
+MUX_CFG(DM644X, LOEEN,		0,   24,    1,	  1,	 true)
+MUX_CFG(DM644X, LFLDEN,		0,   25,    1,	  1,	 false)
+};
+
+
+/*----------------------------------------------------------------------*/
+
+static const s8 dma_chan_dm644x_no_event[] = {
+	 0,  1, 12, 13, 14,
+	15, 25, 30, 31, 45,
+	46, 47, 55, 56, 57,
+	58, 59, 60, 61, 62,
+	63,
+	-1
+};
+
+static struct edma_soc_info dm644x_edma_info = {
+	.n_channel	= 64,
+	.n_region	= 4,
+	.n_slot		= 128,
+	.n_tc		= 2,
+	.noevent	= dma_chan_dm644x_no_event,
+};
+
+static struct resource edma_resources[] = {
+	{
+		.name	= "edma_cc",
+		.start	= 0x01c00000,
+		.end	= 0x01c00000 + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc0",
+		.start	= 0x01c10000,
+		.end	= 0x01c10000 + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc1",
+		.start	= 0x01c10400,
+		.end	= 0x01c10400 + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_CCINT0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_CCERRINT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	/* not using TC*_ERR */
+};
+
+static struct platform_device dm644x_edma_device = {
+	.name			= "edma",
+	.id			= -1,
+	.dev.platform_data	= &dm644x_edma_info,
+	.num_resources		= ARRAY_SIZE(edma_resources),
+	.resource		= edma_resources,
+};
+
+/*----------------------------------------------------------------------*/
+void __init dm644x_init(void)
+{
+	davinci_clk_init(dm644x_clks);
+	davinci_mux_register(dm644x_pins, ARRAY_SIZE(dm644x_pins));
+}
+
+static int __init dm644x_init_devices(void)
+{
+	if (!cpu_is_davinci_dm644x())
+		return 0;
+
+	platform_device_register(&dm644x_edma_device);
+	return 0;
+}
+postcore_initcall(dm644x_init_devices);

arch/arm/mach-davinci/include/mach/board-dm6446evm.h

@@ -0,0 +1,20 @@
+/*
+ * DaVinci DM6446 EVM board specific headers
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or ifndef.
+ */
+
+#ifndef _MACH_DAVINCI_DM6446EVM_H
+#define _MACH_DAVINCI_DM6446EVM_H
+
+#include <linux/types.h>
+
+int dm6446evm_eeprom_read(char *buf, off_t off, size_t count);
+int dm6446evm_eeprom_write(char *buf, off_t off, size_t count);
+
+#endif

arch/arm/mach-davinci/include/mach/common.h

@@ -16,6 +16,12 @@ struct sys_timer;
 
 extern struct sys_timer davinci_timer;
 
+extern void davinci_irq_init(void);
+extern void davinci_map_common_io(void);
+
+/* parameters describe VBUS sourcing for host mode */
+extern void setup_usb(unsigned mA, unsigned potpgt_msec);
+
 /* parameters describe VBUS sourcing for host mode */
 extern void setup_usb(unsigned mA, unsigned potpgt_msec);
 

arch/arm/mach-davinci/include/mach/dm644x.h

@@ -0,0 +1,37 @@
+/*
+ * This file contains the processor specific definitions
+ * of the TI DM644x.
+ *
+ * Copyright (C) 2008 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+#ifndef __ASM_ARCH_DM644X_H
+#define __ASM_ARCH_DM644X_H
+
+#include <linux/platform_device.h>
+#include <mach/hardware.h>
+
+#define DM644X_EMAC_BASE		(0x01C80000)
+#define DM644X_EMAC_CNTRL_OFFSET	(0x0000)
+#define DM644X_EMAC_CNTRL_MOD_OFFSET	(0x1000)
+#define DM644X_EMAC_CNTRL_RAM_OFFSET	(0x2000)
+#define DM644X_EMAC_MDIO_OFFSET		(0x4000)
+#define DM644X_EMAC_CNTRL_RAM_SIZE	(0x2000)
+
+void __init dm644x_init(void);
+
+#endif /* __ASM_ARCH_DM644X_H */