Various typo fixes.

Correct mis-spellings of "algorithm", "appear", "consistent" and
(shame, shame) "kernel".

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

Documentation/video4linux/bttv/Insmod-options

@@ -57,7 +57,7 @@ bttv.o
 		i2c_udelay=     Allow reduce I2C speed. Default is 5 usecs
 				(meaning 66,67 Kbps). The default is the
 				maximum supported speed by kernel bitbang
-				algoritm. You may use lower numbers, if I2C
+				algorithm. You may use lower numbers, if I2C
 				messages are lost (16 is known to work on
 				all supported cards).
 

arch/m32r/lib/usercopy.c

@@ -293,7 +293,7 @@ long strnlen_user(const char __user *s, long n)
 		: "0" (n), "1" (s), "r" (n & 3), "r" (mask), "r"(0x01010101)
 		: "r0", "r1", "cbit");
 
-	/* NOTE: strnlen_user() algorism:
+	/* NOTE: strnlen_user() algorithm:
 	 * {
 	 *   char *p;
 	 *   for (p = s; n-- && *p != '\0'; ++p)
@@ -369,7 +369,7 @@ long strnlen_user(const char __user *s, long n)
 		: "0" (n), "1" (s), "r" (n & 3), "r" (mask), "r"(0x01010101)
 		: "r0", "r1", "r2", "r3", "cbit");
 
-	/* NOTE: strnlen_user() algorism:
+	/* NOTE: strnlen_user() algorithm:
 	 * {
 	 *   char *p;
 	 *   for (p = s; n-- && *p != '\0'; ++p)

arch/m68knommu/platform/5307/timers.c

@@ -104,7 +104,7 @@ unsigned long coldfire_timer_offset(void)
 
 /*
  *	Choose a reasonably fast profile timer. Make it an odd value to
- *	try and get good coverage of kernal operations.
+ *	try and get good coverage of kernel operations.
  */
 #define	PROFILEHZ	1013
 

drivers/infiniband/hw/ipath/ipath_iba6110.c

@@ -1534,7 +1534,7 @@ static int ipath_ht_early_init(struct ipath_devdata *dd)
  * @kbase: ipath_base_info pointer
  *
  * We set the PCIE flag because the lower bandwidth on PCIe vs
- * HyperTransport can affect some user packet algorithims.
+ * HyperTransport can affect some user packet algorithms.
  */
 static int ipath_ht_get_base_info(struct ipath_portdata *pd, void *kbase)
 {

drivers/infiniband/hw/ipath/ipath_iba6120.c

@@ -1293,7 +1293,7 @@ int __attribute__((weak)) ipath_unordered_wc(void)
  * @kbase: ipath_base_info pointer
  *
  * We set the PCIE flag because the lower bandwidth on PCIe vs
- * HyperTransport can affect some user packet algorithims.
+ * HyperTransport can affect some user packet algorithms.
  */
 static int ipath_pe_get_base_info(struct ipath_portdata *pd, void *kbase)
 {

drivers/isdn/i4l/isdn_ppp.c

@@ -1680,7 +1680,7 @@ static void isdn_ppp_mp_receive(isdn_net_dev * net_dev, isdn_net_local * lp,
 	 * - we hit a gap in the sequence, so no reassembly/processing is 
 	 *   possible ('start' would be set to NULL)
 	 *
-	 * algorightm for this code is derived from code in the book
+	 * algorithm for this code is derived from code in the book
 	 * 'PPP Design And Debugging' by James Carlson (Addison-Wesley)
 	 */
   	while (start != NULL || newfrag != NULL) {

drivers/net/e1000/e1000_hw.h

@@ -3253,7 +3253,7 @@ struct e1000_host_command_info {
 #define IFE_PMC_AUTO_MDIX                    0x0080  /* 1=enable MDI/MDI-X feature, default 0=disabled */
 #define IFE_PMC_FORCE_MDIX                   0x0040  /* 1=force MDIX-X, 0=force MDI */
 #define IFE_PMC_MDIX_STATUS                  0x0020  /* 1=MDI-X, 0=MDI */
-#define IFE_PMC_AUTO_MDIX_COMPLETE           0x0010  /* Resolution algorthm is completed */
+#define IFE_PMC_AUTO_MDIX_COMPLETE           0x0010  /* Resolution algorithm is completed */
 #define IFE_PMC_MDIX_MODE_SHIFT              6
 #define IFE_PHC_MDIX_RESET_ALL_MASK          0x0000  /* Disable auto MDI-X */
 

drivers/net/wireless/wavelan_cs.c

@@ -1168,7 +1168,7 @@ wv_mmc_show(struct net_device *	dev)
 	 m.mmr_unused0[6],
 	 m.mmr_unused0[7]);
 #endif	/* DEBUG_SHOW_UNUSED */
-  printk(KERN_DEBUG "Encryption algorythm: %02X - Status: %02X\n",
+  printk(KERN_DEBUG "Encryption algorithm: %02X - Status: %02X\n",
 	 m.mmr_des_avail, m.mmr_des_status);
 #ifdef DEBUG_SHOW_UNUSED
   printk(KERN_DEBUG "mmc_unused1[]: %02X:%02X:%02X:%02X:%02X\n",
@@ -3590,9 +3590,9 @@ wv_82593_config(struct net_device *	dev)
   cfblk.acloc = TRUE;           /* Disable source addr insertion by i82593 */
   cfblk.preamb_len = 0;         /* 2 bytes preamble (SFD) */
   cfblk.loopback = FALSE;
-  cfblk.lin_prio = 0;   	/* conform to 802.3 backoff algoritm */
-  cfblk.exp_prio = 5;	        /* conform to 802.3 backoff algoritm */
-  cfblk.bof_met = 1;	        /* conform to 802.3 backoff algoritm */
+  cfblk.lin_prio = 0;   	/* conform to 802.3 backoff algorithm */
+  cfblk.exp_prio = 5;	        /* conform to 802.3 backoff algorithm */
+  cfblk.bof_met = 1;	        /* conform to 802.3 backoff algorithm */
   cfblk.ifrm_spc = 0x20 >> 4;	/* 32 bit times interframe spacing */
   cfblk.slottim_low = 0x20 >> 5;	/* 32 bit times slot time */
   cfblk.slottim_hi = 0x0;

drivers/sbus/char/vfc_i2c.c

@@ -14,7 +14,7 @@
 /* NOTE: It seems to me that the documentation regarding the
 pcd8584t/pcf8584 does not show the correct way to address the i2c bus.
 Based on the information on the I2C bus itself and the remainder of
-the Phillips docs the following algorithims apper to be correct.  I am
+the Phillips docs the following algorithms appear to be correct.  I am
 fairly certain that the flowcharts in the phillips docs are wrong. */
 
 

include/linux/seqlock.h

@@ -2,7 +2,7 @@
 #define __LINUX_SEQLOCK_H
 /*
  * Reader/writer consistent mechanism without starving writers. This type of
- * lock for data where the reader wants a consitent set of information
+ * lock for data where the reader wants a consistent set of information
  * and is willing to retry if the information changes.  Readers never
  * block but they may have to retry if a writer is in
  * progress. Writers do not wait for readers. 

lib/textsearch.c

@@ -40,7 +40,7 @@
  *       configuration according to the specified parameters.
  *   (3) User starts the search(es) by calling _find() or _next() to
  *       fetch subsequent occurrences. A state variable is provided
- *       to the algorihtm to store persistent variables.
+ *       to the algorithm to store persistent variables.
  *   (4) Core eventually resets the search offset and forwards the find()
  *       request to the algorithm.
  *   (5) Algorithm calls get_next_block() provided by the user continously

net/ipv4/tcp_cong.c

@@ -29,7 +29,7 @@ static struct tcp_congestion_ops *tcp_ca_find(const char *name)
 }
 
 /*
- * Attach new congestion control algorthim to the list
+ * Attach new congestion control algorithm to the list
  * of available options.
  */
 int tcp_register_congestion_control(struct tcp_congestion_ops *ca)