|
@@ -89,9 +89,6 @@ MODULE_DEVICE_TABLE(pnp_card, sscape_pnpids);
|
|
#endif
|
|
#endif
|
|
|
|
|
|
|
|
|
|
-#define MPU401_IO(i) ((i) + 0)
|
|
|
|
-#define MIDI_DATA_IO(i) ((i) + 0)
|
|
|
|
-#define MIDI_CTRL_IO(i) ((i) + 1)
|
|
|
|
#define HOST_CTRL_IO(i) ((i) + 2)
|
|
#define HOST_CTRL_IO(i) ((i) + 2)
|
|
#define HOST_DATA_IO(i) ((i) + 3)
|
|
#define HOST_DATA_IO(i) ((i) + 3)
|
|
#define ODIE_ADDR_IO(i) ((i) + 4)
|
|
#define ODIE_ADDR_IO(i) ((i) + 4)
|
|
@@ -129,9 +126,6 @@ enum GA_REG {
|
|
#define DMA_8BIT 0x80
|
|
#define DMA_8BIT 0x80
|
|
|
|
|
|
|
|
|
|
-#define AD1845_FREQ_SEL_MSB 0x16
|
|
|
|
-#define AD1845_FREQ_SEL_LSB 0x17
|
|
|
|
-
|
|
|
|
enum card_type {
|
|
enum card_type {
|
|
SSCAPE,
|
|
SSCAPE,
|
|
SSCAPE_PNP,
|
|
SSCAPE_PNP,
|
|
@@ -141,8 +135,6 @@ enum card_type {
|
|
struct soundscape {
|
|
struct soundscape {
|
|
spinlock_t lock;
|
|
spinlock_t lock;
|
|
unsigned io_base;
|
|
unsigned io_base;
|
|
- unsigned wss_base;
|
|
|
|
- int codec_type;
|
|
|
|
int ic_type;
|
|
int ic_type;
|
|
enum card_type type;
|
|
enum card_type type;
|
|
struct resource *io_res;
|
|
struct resource *io_res;
|
|
@@ -330,7 +322,7 @@ static int host_write_ctrl_unsafe(unsigned io_base, unsigned char data,
|
|
*/
|
|
*/
|
|
static inline int verify_mpu401(const struct snd_mpu401 * mpu)
|
|
static inline int verify_mpu401(const struct snd_mpu401 * mpu)
|
|
{
|
|
{
|
|
- return ((inb(MIDI_CTRL_IO(mpu->port)) & 0xc0) == 0x80);
|
|
|
|
|
|
+ return ((inb(MPU401C(mpu)) & 0xc0) == 0x80);
|
|
}
|
|
}
|
|
|
|
|
|
/*
|
|
/*
|
|
@@ -338,7 +330,7 @@ static inline int verify_mpu401(const struct snd_mpu401 * mpu)
|
|
*/
|
|
*/
|
|
static inline void initialise_mpu401(const struct snd_mpu401 * mpu)
|
|
static inline void initialise_mpu401(const struct snd_mpu401 * mpu)
|
|
{
|
|
{
|
|
- outb(0, MIDI_DATA_IO(mpu->port));
|
|
|
|
|
|
+ outb(0, MPU401D(mpu));
|
|
}
|
|
}
|
|
|
|
|
|
/*
|
|
/*
|
|
@@ -396,20 +388,20 @@ static int sscape_wait_dma_unsafe(unsigned io_base, enum GA_REG reg, unsigned ti
|
|
*/
|
|
*/
|
|
static int obp_startup_ack(struct soundscape *s, unsigned timeout)
|
|
static int obp_startup_ack(struct soundscape *s, unsigned timeout)
|
|
{
|
|
{
|
|
- while (timeout != 0) {
|
|
|
|
|
|
+ unsigned long end_time = jiffies + msecs_to_jiffies(timeout);
|
|
|
|
+
|
|
|
|
+ do {
|
|
unsigned long flags;
|
|
unsigned long flags;
|
|
unsigned char x;
|
|
unsigned char x;
|
|
|
|
|
|
- schedule_timeout_uninterruptible(1);
|
|
|
|
-
|
|
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
x = inb(HOST_DATA_IO(s->io_base));
|
|
x = inb(HOST_DATA_IO(s->io_base));
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
if ((x & 0xfe) == 0xfe)
|
|
if ((x & 0xfe) == 0xfe)
|
|
return 1;
|
|
return 1;
|
|
|
|
|
|
- --timeout;
|
|
|
|
- } /* while */
|
|
|
|
|
|
+ msleep(10);
|
|
|
|
+ } while (time_before(jiffies, end_time));
|
|
|
|
|
|
return 0;
|
|
return 0;
|
|
}
|
|
}
|
|
@@ -423,20 +415,20 @@ static int obp_startup_ack(struct soundscape *s, unsigned timeout)
|
|
*/
|
|
*/
|
|
static int host_startup_ack(struct soundscape *s, unsigned timeout)
|
|
static int host_startup_ack(struct soundscape *s, unsigned timeout)
|
|
{
|
|
{
|
|
- while (timeout != 0) {
|
|
|
|
|
|
+ unsigned long end_time = jiffies + msecs_to_jiffies(timeout);
|
|
|
|
+
|
|
|
|
+ do {
|
|
unsigned long flags;
|
|
unsigned long flags;
|
|
unsigned char x;
|
|
unsigned char x;
|
|
|
|
|
|
- schedule_timeout_uninterruptible(1);
|
|
|
|
-
|
|
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
x = inb(HOST_DATA_IO(s->io_base));
|
|
x = inb(HOST_DATA_IO(s->io_base));
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
if (x == 0xfe)
|
|
if (x == 0xfe)
|
|
return 1;
|
|
return 1;
|
|
|
|
|
|
- --timeout;
|
|
|
|
- } /* while */
|
|
|
|
|
|
+ msleep(10);
|
|
|
|
+ } while (time_before(jiffies, end_time));
|
|
|
|
|
|
return 0;
|
|
return 0;
|
|
}
|
|
}
|
|
@@ -532,10 +524,10 @@ static int upload_dma_data(struct soundscape *s,
|
|
* give it 5 seconds (max) ...
|
|
* give it 5 seconds (max) ...
|
|
*/
|
|
*/
|
|
ret = 0;
|
|
ret = 0;
|
|
- if (!obp_startup_ack(s, 5)) {
|
|
|
|
|
|
+ if (!obp_startup_ack(s, 5000)) {
|
|
snd_printk(KERN_ERR "sscape: No response from on-board processor after upload\n");
|
|
snd_printk(KERN_ERR "sscape: No response from on-board processor after upload\n");
|
|
ret = -EAGAIN;
|
|
ret = -EAGAIN;
|
|
- } else if (!host_startup_ack(s, 5)) {
|
|
|
|
|
|
+ } else if (!host_startup_ack(s, 5000)) {
|
|
snd_printk(KERN_ERR "sscape: SoundScape failed to initialise\n");
|
|
snd_printk(KERN_ERR "sscape: SoundScape failed to initialise\n");
|
|
ret = -EAGAIN;
|
|
ret = -EAGAIN;
|
|
}
|
|
}
|
|
@@ -732,13 +724,7 @@ static int sscape_midi_get(struct snd_kcontrol *kctl,
|
|
unsigned long flags;
|
|
unsigned long flags;
|
|
|
|
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
- set_host_mode_unsafe(s->io_base);
|
|
|
|
-
|
|
|
|
- if (host_write_ctrl_unsafe(s->io_base, CMD_GET_MIDI_VOL, 100)) {
|
|
|
|
- uctl->value.integer.value[0] = host_read_ctrl_unsafe(s->io_base, 100);
|
|
|
|
- }
|
|
|
|
-
|
|
|
|
- set_midi_mode_unsafe(s->io_base);
|
|
|
|
|
|
+ uctl->value.integer.value[0] = s->midi_vol;
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
return 0;
|
|
return 0;
|
|
}
|
|
}
|
|
@@ -773,6 +759,7 @@ static int sscape_midi_put(struct snd_kcontrol *kctl,
|
|
change = (host_write_ctrl_unsafe(s->io_base, CMD_SET_MIDI_VOL, 100)
|
|
change = (host_write_ctrl_unsafe(s->io_base, CMD_SET_MIDI_VOL, 100)
|
|
&& host_write_ctrl_unsafe(s->io_base, ((unsigned char) uctl->value.integer. value[0]) & 127, 100)
|
|
&& host_write_ctrl_unsafe(s->io_base, ((unsigned char) uctl->value.integer. value[0]) & 127, 100)
|
|
&& host_write_ctrl_unsafe(s->io_base, CMD_XXX_MIDI_VOL, 100));
|
|
&& host_write_ctrl_unsafe(s->io_base, CMD_XXX_MIDI_VOL, 100));
|
|
|
|
+ s->midi_vol = (unsigned char) uctl->value.integer.value[0] & 127;
|
|
__skip_change:
|
|
__skip_change:
|
|
|
|
|
|
/*
|
|
/*
|
|
@@ -815,12 +802,11 @@ static unsigned __devinit get_irq_config(int irq)
|
|
* Perform certain arcane port-checks to see whether there
|
|
* Perform certain arcane port-checks to see whether there
|
|
* is a SoundScape board lurking behind the given ports.
|
|
* is a SoundScape board lurking behind the given ports.
|
|
*/
|
|
*/
|
|
-static int __devinit detect_sscape(struct soundscape *s)
|
|
|
|
|
|
+static int __devinit detect_sscape(struct soundscape *s, long wss_io)
|
|
{
|
|
{
|
|
unsigned long flags;
|
|
unsigned long flags;
|
|
unsigned d;
|
|
unsigned d;
|
|
int retval = 0;
|
|
int retval = 0;
|
|
- int codec = s->wss_base;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
spin_lock_irqsave(&s->lock, flags);
|
|
|
|
|
|
@@ -836,13 +822,11 @@ static int __devinit detect_sscape(struct soundscape *s)
|
|
if ((d & 0x80) != 0)
|
|
if ((d & 0x80) != 0)
|
|
goto _done;
|
|
goto _done;
|
|
|
|
|
|
- if (d == 0) {
|
|
|
|
- s->codec_type = 1;
|
|
|
|
|
|
+ if (d == 0)
|
|
s->ic_type = IC_ODIE;
|
|
s->ic_type = IC_ODIE;
|
|
- } else if ((d & 0x60) != 0) {
|
|
|
|
- s->codec_type = 2;
|
|
|
|
|
|
+ else if ((d & 0x60) != 0)
|
|
s->ic_type = IC_OPUS;
|
|
s->ic_type = IC_OPUS;
|
|
- } else
|
|
|
|
|
|
+ else
|
|
goto _done;
|
|
goto _done;
|
|
|
|
|
|
outb(0xfa, ODIE_ADDR_IO(s->io_base));
|
|
outb(0xfa, ODIE_ADDR_IO(s->io_base));
|
|
@@ -862,10 +846,10 @@ static int __devinit detect_sscape(struct soundscape *s)
|
|
sscape_write_unsafe(s->io_base, GA_HMCTL_REG, d | 0xc0);
|
|
sscape_write_unsafe(s->io_base, GA_HMCTL_REG, d | 0xc0);
|
|
|
|
|
|
if (s->type == SSCAPE_VIVO)
|
|
if (s->type == SSCAPE_VIVO)
|
|
- codec += 4;
|
|
|
|
|
|
+ wss_io += 4;
|
|
/* wait for WSS codec */
|
|
/* wait for WSS codec */
|
|
for (d = 0; d < 500; d++) {
|
|
for (d = 0; d < 500; d++) {
|
|
- if ((inb(codec) & 0x80) == 0)
|
|
|
|
|
|
+ if ((inb(wss_io) & 0x80) == 0)
|
|
break;
|
|
break;
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
spin_unlock_irqrestore(&s->lock, flags);
|
|
msleep(1);
|
|
msleep(1);
|
|
@@ -954,82 +938,6 @@ static int __devinit create_mpu401(struct snd_card *card, int devnum, unsigned l
|
|
}
|
|
}
|
|
|
|
|
|
|
|
|
|
-/*
|
|
|
|
- * Override for the CS4231 playback format function.
|
|
|
|
- * The AD1845 has much simpler format and rate selection.
|
|
|
|
- */
|
|
|
|
-static void ad1845_playback_format(struct snd_wss *chip,
|
|
|
|
- struct snd_pcm_hw_params *params,
|
|
|
|
- unsigned char format)
|
|
|
|
-{
|
|
|
|
- unsigned long flags;
|
|
|
|
- unsigned rate = params_rate(params);
|
|
|
|
-
|
|
|
|
- /*
|
|
|
|
- * The AD1845 can't handle sample frequencies
|
|
|
|
- * outside of 4 kHZ to 50 kHZ
|
|
|
|
- */
|
|
|
|
- if (rate > 50000)
|
|
|
|
- rate = 50000;
|
|
|
|
- else if (rate < 4000)
|
|
|
|
- rate = 4000;
|
|
|
|
-
|
|
|
|
- spin_lock_irqsave(&chip->reg_lock, flags);
|
|
|
|
-
|
|
|
|
- /*
|
|
|
|
- * Program the AD1845 correctly for the playback stream.
|
|
|
|
- * Note that we do NOT need to toggle the MCE bit because
|
|
|
|
- * the PLAYBACK_ENABLE bit of the Interface Configuration
|
|
|
|
- * register is set.
|
|
|
|
- *
|
|
|
|
- * NOTE: We seem to need to write to the MSB before the LSB
|
|
|
|
- * to get the correct sample frequency.
|
|
|
|
- */
|
|
|
|
- snd_wss_out(chip, CS4231_PLAYBK_FORMAT, (format & 0xf0));
|
|
|
|
- snd_wss_out(chip, AD1845_FREQ_SEL_MSB, (unsigned char) (rate >> 8));
|
|
|
|
- snd_wss_out(chip, AD1845_FREQ_SEL_LSB, (unsigned char) rate);
|
|
|
|
-
|
|
|
|
- spin_unlock_irqrestore(&chip->reg_lock, flags);
|
|
|
|
-}
|
|
|
|
-
|
|
|
|
-/*
|
|
|
|
- * Override for the CS4231 capture format function.
|
|
|
|
- * The AD1845 has much simpler format and rate selection.
|
|
|
|
- */
|
|
|
|
-static void ad1845_capture_format(struct snd_wss *chip,
|
|
|
|
- struct snd_pcm_hw_params *params,
|
|
|
|
- unsigned char format)
|
|
|
|
-{
|
|
|
|
- unsigned long flags;
|
|
|
|
- unsigned rate = params_rate(params);
|
|
|
|
-
|
|
|
|
- /*
|
|
|
|
- * The AD1845 can't handle sample frequencies
|
|
|
|
- * outside of 4 kHZ to 50 kHZ
|
|
|
|
- */
|
|
|
|
- if (rate > 50000)
|
|
|
|
- rate = 50000;
|
|
|
|
- else if (rate < 4000)
|
|
|
|
- rate = 4000;
|
|
|
|
-
|
|
|
|
- spin_lock_irqsave(&chip->reg_lock, flags);
|
|
|
|
-
|
|
|
|
- /*
|
|
|
|
- * Program the AD1845 correctly for the playback stream.
|
|
|
|
- * Note that we do NOT need to toggle the MCE bit because
|
|
|
|
- * the CAPTURE_ENABLE bit of the Interface Configuration
|
|
|
|
- * register is set.
|
|
|
|
- *
|
|
|
|
- * NOTE: We seem to need to write to the MSB before the LSB
|
|
|
|
- * to get the correct sample frequency.
|
|
|
|
- */
|
|
|
|
- snd_wss_out(chip, CS4231_REC_FORMAT, (format & 0xf0));
|
|
|
|
- snd_wss_out(chip, AD1845_FREQ_SEL_MSB, (unsigned char) (rate >> 8));
|
|
|
|
- snd_wss_out(chip, AD1845_FREQ_SEL_LSB, (unsigned char) rate);
|
|
|
|
-
|
|
|
|
- spin_unlock_irqrestore(&chip->reg_lock, flags);
|
|
|
|
-}
|
|
|
|
-
|
|
|
|
/*
|
|
/*
|
|
* Create an AD1845 PCM subdevice on the SoundScape. The AD1845
|
|
* Create an AD1845 PCM subdevice on the SoundScape. The AD1845
|
|
* is very much like a CS4231, with a few extra bits. We will
|
|
* is very much like a CS4231, with a few extra bits. We will
|
|
@@ -1055,11 +963,6 @@ static int __devinit create_ad1845(struct snd_card *card, unsigned port,
|
|
unsigned long flags;
|
|
unsigned long flags;
|
|
struct snd_pcm *pcm;
|
|
struct snd_pcm *pcm;
|
|
|
|
|
|
-#define AD1845_FREQ_SEL_ENABLE 0x08
|
|
|
|
-
|
|
|
|
-#define AD1845_PWR_DOWN_CTRL 0x1b
|
|
|
|
-#define AD1845_CRYS_CLOCK_SEL 0x1d
|
|
|
|
-
|
|
|
|
/*
|
|
/*
|
|
* It turns out that the PLAYBACK_ENABLE bit is set
|
|
* It turns out that the PLAYBACK_ENABLE bit is set
|
|
* by the lowlevel driver ...
|
|
* by the lowlevel driver ...
|
|
@@ -1074,7 +977,6 @@ static int __devinit create_ad1845(struct snd_card *card, unsigned port,
|
|
*/
|
|
*/
|
|
|
|
|
|
if (sscape->type != SSCAPE_VIVO) {
|
|
if (sscape->type != SSCAPE_VIVO) {
|
|
- int val;
|
|
|
|
/*
|
|
/*
|
|
* The input clock frequency on the SoundScape must
|
|
* The input clock frequency on the SoundScape must
|
|
* be 14.31818 MHz, because we must set this register
|
|
* be 14.31818 MHz, because we must set this register
|
|
@@ -1082,22 +984,10 @@ static int __devinit create_ad1845(struct snd_card *card, unsigned port,
|
|
*/
|
|
*/
|
|
snd_wss_mce_up(chip);
|
|
snd_wss_mce_up(chip);
|
|
spin_lock_irqsave(&chip->reg_lock, flags);
|
|
spin_lock_irqsave(&chip->reg_lock, flags);
|
|
- snd_wss_out(chip, AD1845_CRYS_CLOCK_SEL, 0x20);
|
|
|
|
|
|
+ snd_wss_out(chip, AD1845_CLOCK, 0x20);
|
|
spin_unlock_irqrestore(&chip->reg_lock, flags);
|
|
spin_unlock_irqrestore(&chip->reg_lock, flags);
|
|
snd_wss_mce_down(chip);
|
|
snd_wss_mce_down(chip);
|
|
|
|
|
|
- /*
|
|
|
|
- * More custom configuration:
|
|
|
|
- * a) select "mode 2" and provide a current drive of 8mA
|
|
|
|
- * b) enable frequency selection (for capture/playback)
|
|
|
|
- */
|
|
|
|
- spin_lock_irqsave(&chip->reg_lock, flags);
|
|
|
|
- snd_wss_out(chip, CS4231_MISC_INFO,
|
|
|
|
- CS4231_MODE2 | 0x10);
|
|
|
|
- val = snd_wss_in(chip, AD1845_PWR_DOWN_CTRL);
|
|
|
|
- snd_wss_out(chip, AD1845_PWR_DOWN_CTRL,
|
|
|
|
- val | AD1845_FREQ_SEL_ENABLE);
|
|
|
|
- spin_unlock_irqrestore(&chip->reg_lock, flags);
|
|
|
|
}
|
|
}
|
|
|
|
|
|
err = snd_wss_pcm(chip, 0, &pcm);
|
|
err = snd_wss_pcm(chip, 0, &pcm);
|
|
@@ -1113,11 +1003,13 @@ static int __devinit create_ad1845(struct snd_card *card, unsigned port,
|
|
"for AD1845 chip\n");
|
|
"for AD1845 chip\n");
|
|
goto _error;
|
|
goto _error;
|
|
}
|
|
}
|
|
- err = snd_wss_timer(chip, 0, NULL);
|
|
|
|
- if (err < 0) {
|
|
|
|
- snd_printk(KERN_ERR "sscape: No timer device "
|
|
|
|
- "for AD1845 chip\n");
|
|
|
|
- goto _error;
|
|
|
|
|
|
+ if (chip->hardware != WSS_HW_AD1848) {
|
|
|
|
+ err = snd_wss_timer(chip, 0, NULL);
|
|
|
|
+ if (err < 0) {
|
|
|
|
+ snd_printk(KERN_ERR "sscape: No timer device "
|
|
|
|
+ "for AD1845 chip\n");
|
|
|
|
+ goto _error;
|
|
|
|
+ }
|
|
}
|
|
}
|
|
|
|
|
|
if (sscape->type != SSCAPE_VIVO) {
|
|
if (sscape->type != SSCAPE_VIVO) {
|
|
@@ -1128,8 +1020,6 @@ static int __devinit create_ad1845(struct snd_card *card, unsigned port,
|
|
"MIDI mixer control\n");
|
|
"MIDI mixer control\n");
|
|
goto _error;
|
|
goto _error;
|
|
}
|
|
}
|
|
- chip->set_playback_format = ad1845_playback_format;
|
|
|
|
- chip->set_capture_format = ad1845_capture_format;
|
|
|
|
}
|
|
}
|
|
|
|
|
|
strcpy(card->driver, "SoundScape");
|
|
strcpy(card->driver, "SoundScape");
|
|
@@ -1157,7 +1047,6 @@ static int __devinit create_sscape(int dev, struct snd_card *card)
|
|
unsigned dma_cfg;
|
|
unsigned dma_cfg;
|
|
unsigned irq_cfg;
|
|
unsigned irq_cfg;
|
|
unsigned mpu_irq_cfg;
|
|
unsigned mpu_irq_cfg;
|
|
- unsigned xport;
|
|
|
|
struct resource *io_res;
|
|
struct resource *io_res;
|
|
struct resource *wss_res;
|
|
struct resource *wss_res;
|
|
unsigned long flags;
|
|
unsigned long flags;
|
|
@@ -1177,15 +1066,15 @@ static int __devinit create_sscape(int dev, struct snd_card *card)
|
|
printk(KERN_ERR "sscape: Invalid IRQ %d\n", mpu_irq[dev]);
|
|
printk(KERN_ERR "sscape: Invalid IRQ %d\n", mpu_irq[dev]);
|
|
return -ENXIO;
|
|
return -ENXIO;
|
|
}
|
|
}
|
|
- xport = port[dev];
|
|
|
|
|
|
|
|
/*
|
|
/*
|
|
* Grab IO ports that we will need to probe so that we
|
|
* Grab IO ports that we will need to probe so that we
|
|
* can detect and control this hardware ...
|
|
* can detect and control this hardware ...
|
|
*/
|
|
*/
|
|
- io_res = request_region(xport, 8, "SoundScape");
|
|
|
|
|
|
+ io_res = request_region(port[dev], 8, "SoundScape");
|
|
if (!io_res) {
|
|
if (!io_res) {
|
|
- snd_printk(KERN_ERR "sscape: can't grab port 0x%x\n", xport);
|
|
|
|
|
|
+ snd_printk(KERN_ERR
|
|
|
|
+ "sscape: can't grab port 0x%lx\n", port[dev]);
|
|
return -EBUSY;
|
|
return -EBUSY;
|
|
}
|
|
}
|
|
wss_res = NULL;
|
|
wss_res = NULL;
|
|
@@ -1212,10 +1101,9 @@ static int __devinit create_sscape(int dev, struct snd_card *card)
|
|
spin_lock_init(&sscape->fwlock);
|
|
spin_lock_init(&sscape->fwlock);
|
|
sscape->io_res = io_res;
|
|
sscape->io_res = io_res;
|
|
sscape->wss_res = wss_res;
|
|
sscape->wss_res = wss_res;
|
|
- sscape->io_base = xport;
|
|
|
|
- sscape->wss_base = wss_port[dev];
|
|
|
|
|
|
+ sscape->io_base = port[dev];
|
|
|
|
|
|
- if (!detect_sscape(sscape)) {
|
|
|
|
|
|
+ if (!detect_sscape(sscape, wss_port[dev])) {
|
|
printk(KERN_ERR "sscape: hardware not detected at 0x%x\n", sscape->io_base);
|
|
printk(KERN_ERR "sscape: hardware not detected at 0x%x\n", sscape->io_base);
|
|
err = -ENODEV;
|
|
err = -ENODEV;
|
|
goto _release_dma;
|
|
goto _release_dma;
|
|
@@ -1288,12 +1176,11 @@ static int __devinit create_sscape(int dev, struct snd_card *card)
|
|
}
|
|
}
|
|
#define MIDI_DEVNUM 0
|
|
#define MIDI_DEVNUM 0
|
|
if (sscape->type != SSCAPE_VIVO) {
|
|
if (sscape->type != SSCAPE_VIVO) {
|
|
- err = create_mpu401(card, MIDI_DEVNUM,
|
|
|
|
- MPU401_IO(xport), mpu_irq[dev]);
|
|
|
|
|
|
+ err = create_mpu401(card, MIDI_DEVNUM, port[dev], mpu_irq[dev]);
|
|
if (err < 0) {
|
|
if (err < 0) {
|
|
printk(KERN_ERR "sscape: Failed to create "
|
|
printk(KERN_ERR "sscape: Failed to create "
|
|
- "MPU-401 device at 0x%x\n",
|
|
|
|
- MPU401_IO(xport));
|
|
|
|
|
|
+ "MPU-401 device at 0x%lx\n",
|
|
|
|
+ port[dev]);
|
|
goto _release_dma;
|
|
goto _release_dma;
|
|
}
|
|
}
|
|
|
|
|