smc91x: pass along private data V2

Pass a private data pointer to macros and functions. This makes it easy
to later on make run time decisions. This patch does not change any logic.
These changes should be optimized away during compilation.

V2 changes the macro argument name from "priv" to "lp".

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

drivers/net/smc91x.c

@@ -220,22 +220,22 @@ static void PRINT_PKT(u_char *buf, int length)
 
 
 /* this enables an interrupt in the interrupt mask register */
-#define SMC_ENABLE_INT(x) do {						\
+#define SMC_ENABLE_INT(lp, x) do {					\
 	unsigned char mask;						\
 	spin_lock_irq(&lp->lock);					\
-	mask = SMC_GET_INT_MASK();					\
+	mask = SMC_GET_INT_MASK(lp);					\
 	mask |= (x);							\
-	SMC_SET_INT_MASK(mask);						\
+	SMC_SET_INT_MASK(lp, mask);					\
 	spin_unlock_irq(&lp->lock);					\
 } while (0)
 
 /* this disables an interrupt from the interrupt mask register */
-#define SMC_DISABLE_INT(x) do {						\
+#define SMC_DISABLE_INT(lp, x) do {					\
 	unsigned char mask;						\
 	spin_lock_irq(&lp->lock);					\
-	mask = SMC_GET_INT_MASK();					\
+	mask = SMC_GET_INT_MASK(lp);					\
 	mask &= ~(x);							\
-	SMC_SET_INT_MASK(mask);						\
+	SMC_SET_INT_MASK(lp, mask);					\
 	spin_unlock_irq(&lp->lock);					\
 } while (0)
 
@@ -244,10 +244,10 @@ static void PRINT_PKT(u_char *buf, int length)
  * if at all, but let's avoid deadlocking the system if the hardware
  * decides to go south.
  */
-#define SMC_WAIT_MMU_BUSY() do {					\
-	if (unlikely(SMC_GET_MMU_CMD() & MC_BUSY)) {			\
+#define SMC_WAIT_MMU_BUSY(lp) do {					\
+	if (unlikely(SMC_GET_MMU_CMD(lp) & MC_BUSY)) {		\
 		unsigned long timeout = jiffies + 2;			\
-		while (SMC_GET_MMU_CMD() & MC_BUSY) {			\
+		while (SMC_GET_MMU_CMD(lp) & MC_BUSY) {		\
 			if (time_after(jiffies, timeout)) {		\
 				printk("%s: timeout %s line %d\n",	\
 					dev->name, __FILE__, __LINE__);	\
@@ -273,8 +273,8 @@ static void smc_reset(struct net_device *dev)
 
 	/* Disable all interrupts, block TX tasklet */
 	spin_lock_irq(&lp->lock);
-	SMC_SELECT_BANK(2);
-	SMC_SET_INT_MASK(0);
+	SMC_SELECT_BANK(lp, 2);
+	SMC_SET_INT_MASK(lp, 0);
 	pending_skb = lp->pending_tx_skb;
 	lp->pending_tx_skb = NULL;
 	spin_unlock_irq(&lp->lock);
@@ -290,15 +290,15 @@ static void smc_reset(struct net_device *dev)
 	 * This resets the registers mostly to defaults, but doesn't
 	 * affect EEPROM.  That seems unnecessary
 	 */
-	SMC_SELECT_BANK(0);
-	SMC_SET_RCR(RCR_SOFTRST);
+	SMC_SELECT_BANK(lp, 0);
+	SMC_SET_RCR(lp, RCR_SOFTRST);
 
 	/*
 	 * Setup the Configuration Register
 	 * This is necessary because the CONFIG_REG is not affected
 	 * by a soft reset
 	 */
-	SMC_SELECT_BANK(1);
+	SMC_SELECT_BANK(lp, 1);
 
 	cfg = CONFIG_DEFAULT;
 
@@ -316,7 +316,7 @@ static void smc_reset(struct net_device *dev)
 	 */
 	cfg |= CONFIG_EPH_POWER_EN;
 
-	SMC_SET_CONFIG(cfg);
+	SMC_SET_CONFIG(lp, cfg);
 
 	/* this should pause enough for the chip to be happy */
 	/*
@@ -329,12 +329,12 @@ static void smc_reset(struct net_device *dev)
 	udelay(1);
 
 	/* Disable transmit and receive functionality */
-	SMC_SELECT_BANK(0);
-	SMC_SET_RCR(RCR_CLEAR);
-	SMC_SET_TCR(TCR_CLEAR);
+	SMC_SELECT_BANK(lp, 0);
+	SMC_SET_RCR(lp, RCR_CLEAR);
+	SMC_SET_TCR(lp, TCR_CLEAR);
 
-	SMC_SELECT_BANK(1);
-	ctl = SMC_GET_CTL() | CTL_LE_ENABLE;
+	SMC_SELECT_BANK(lp, 1);
+	ctl = SMC_GET_CTL(lp) | CTL_LE_ENABLE;
 
 	/*
 	 * Set the control register to automatically release successfully
@@ -345,12 +345,12 @@ static void smc_reset(struct net_device *dev)
 		ctl |= CTL_AUTO_RELEASE;
 	else
 		ctl &= ~CTL_AUTO_RELEASE;
-	SMC_SET_CTL(ctl);
+	SMC_SET_CTL(lp, ctl);
 
 	/* Reset the MMU */
-	SMC_SELECT_BANK(2);
-	SMC_SET_MMU_CMD(MC_RESET);
-	SMC_WAIT_MMU_BUSY();
+	SMC_SELECT_BANK(lp, 2);
+	SMC_SET_MMU_CMD(lp, MC_RESET);
+	SMC_WAIT_MMU_BUSY(lp);
 }
 
 /*
@@ -365,19 +365,19 @@ static void smc_enable(struct net_device *dev)
 	DBG(2, "%s: %s\n", dev->name, __FUNCTION__);
 
 	/* see the header file for options in TCR/RCR DEFAULT */
-	SMC_SELECT_BANK(0);
-	SMC_SET_TCR(lp->tcr_cur_mode);
-	SMC_SET_RCR(lp->rcr_cur_mode);
+	SMC_SELECT_BANK(lp, 0);
+	SMC_SET_TCR(lp, lp->tcr_cur_mode);
+	SMC_SET_RCR(lp, lp->rcr_cur_mode);
 
-	SMC_SELECT_BANK(1);
-	SMC_SET_MAC_ADDR(dev->dev_addr);
+	SMC_SELECT_BANK(lp, 1);
+	SMC_SET_MAC_ADDR(lp, dev->dev_addr);
 
 	/* now, enable interrupts */
 	mask = IM_EPH_INT|IM_RX_OVRN_INT|IM_RCV_INT;
 	if (lp->version >= (CHIP_91100 << 4))
 		mask |= IM_MDINT;
-	SMC_SELECT_BANK(2);
-	SMC_SET_INT_MASK(mask);
+	SMC_SELECT_BANK(lp, 2);
+	SMC_SET_INT_MASK(lp, mask);
 
 	/*
 	 * From this point the register bank must _NOT_ be switched away
@@ -400,8 +400,8 @@ static void smc_shutdown(struct net_device *dev)
 
 	/* no more interrupts for me */
 	spin_lock_irq(&lp->lock);
-	SMC_SELECT_BANK(2);
-	SMC_SET_INT_MASK(0);
+	SMC_SELECT_BANK(lp, 2);
+	SMC_SET_INT_MASK(lp, 0);
 	pending_skb = lp->pending_tx_skb;
 	lp->pending_tx_skb = NULL;
 	spin_unlock_irq(&lp->lock);
@@ -409,14 +409,14 @@ static void smc_shutdown(struct net_device *dev)
 		dev_kfree_skb(pending_skb);
 
 	/* and tell the card to stay away from that nasty outside world */
-	SMC_SELECT_BANK(0);
-	SMC_SET_RCR(RCR_CLEAR);
-	SMC_SET_TCR(TCR_CLEAR);
+	SMC_SELECT_BANK(lp, 0);
+	SMC_SET_RCR(lp, RCR_CLEAR);
+	SMC_SET_TCR(lp, TCR_CLEAR);
 
 #ifdef POWER_DOWN
 	/* finally, shut the chip down */
-	SMC_SELECT_BANK(1);
-	SMC_SET_CONFIG(SMC_GET_CONFIG() & ~CONFIG_EPH_POWER_EN);
+	SMC_SELECT_BANK(lp, 1);
+	SMC_SET_CONFIG(lp, SMC_GET_CONFIG(lp) & ~CONFIG_EPH_POWER_EN);
 #endif
 }
 
@@ -431,17 +431,17 @@ static inline void  smc_rcv(struct net_device *dev)
 
 	DBG(3, "%s: %s\n", dev->name, __FUNCTION__);
 
-	packet_number = SMC_GET_RXFIFO();
+	packet_number = SMC_GET_RXFIFO(lp);
 	if (unlikely(packet_number & RXFIFO_REMPTY)) {
 		PRINTK("%s: smc_rcv with nothing on FIFO.\n", dev->name);
 		return;
 	}
 
 	/* read from start of packet */
-	SMC_SET_PTR(PTR_READ | PTR_RCV | PTR_AUTOINC);
+	SMC_SET_PTR(lp, PTR_READ | PTR_RCV | PTR_AUTOINC);
 
 	/* First two words are status and packet length */
-	SMC_GET_PKT_HDR(status, packet_len);
+	SMC_GET_PKT_HDR(lp, status, packet_len);
 	packet_len &= 0x07ff;  /* mask off top bits */
 	DBG(2, "%s: RX PNR 0x%x STATUS 0x%04x LENGTH 0x%04x (%d)\n",
 		dev->name, packet_number, status,
@@ -460,8 +460,8 @@ static inline void  smc_rcv(struct net_device *dev)
 					dev->name, packet_len, status);
 			status |= RS_TOOSHORT;
 		}
-		SMC_WAIT_MMU_BUSY();
-		SMC_SET_MMU_CMD(MC_RELEASE);
+		SMC_WAIT_MMU_BUSY(lp);
+		SMC_SET_MMU_CMD(lp, MC_RELEASE);
 		dev->stats.rx_errors++;
 		if (status & RS_ALGNERR)
 			dev->stats.rx_frame_errors++;
@@ -490,8 +490,8 @@ static inline void  smc_rcv(struct net_device *dev)
 		if (unlikely(skb == NULL)) {
 			printk(KERN_NOTICE "%s: Low memory, packet dropped.\n",
 				dev->name);
-			SMC_WAIT_MMU_BUSY();
-			SMC_SET_MMU_CMD(MC_RELEASE);
+			SMC_WAIT_MMU_BUSY(lp);
+			SMC_SET_MMU_CMD(lp, MC_RELEASE);
 			dev->stats.rx_dropped++;
 			return;
 		}
@@ -510,10 +510,10 @@ static inline void  smc_rcv(struct net_device *dev)
 		 */
 		data_len = packet_len - ((status & RS_ODDFRAME) ? 5 : 6);
 		data = skb_put(skb, data_len);
-		SMC_PULL_DATA(data, packet_len - 4);
+		SMC_PULL_DATA(lp, data, packet_len - 4);
 
-		SMC_WAIT_MMU_BUSY();
-		SMC_SET_MMU_CMD(MC_RELEASE);
+		SMC_WAIT_MMU_BUSY(lp);
+		SMC_SET_MMU_CMD(lp, MC_RELEASE);
 
 		PRINT_PKT(data, packet_len - 4);
 
@@ -591,7 +591,7 @@ static void smc_hardware_send_pkt(unsigned long data)
 	}
 	lp->pending_tx_skb = NULL;
 
-	packet_no = SMC_GET_AR();
+	packet_no = SMC_GET_AR(lp);
 	if (unlikely(packet_no & AR_FAILED)) {
 		printk("%s: Memory allocation failed.\n", dev->name);
 		dev->stats.tx_errors++;
@@ -601,8 +601,8 @@ static void smc_hardware_send_pkt(unsigned long data)
 	}
 
 	/* point to the beginning of the packet */
-	SMC_SET_PN(packet_no);
-	SMC_SET_PTR(PTR_AUTOINC);
+	SMC_SET_PN(lp, packet_no);
+	SMC_SET_PTR(lp, PTR_AUTOINC);
 
 	buf = skb->data;
 	len = skb->len;
@@ -614,13 +614,13 @@ static void smc_hardware_send_pkt(unsigned long data)
 	 * Send the packet length (+6 for status words, length, and ctl.
 	 * The card will pad to 64 bytes with zeroes if packet is too small.
 	 */
-	SMC_PUT_PKT_HDR(0, len + 6);
+	SMC_PUT_PKT_HDR(lp, 0, len + 6);
 
 	/* send the actual data */
-	SMC_PUSH_DATA(buf, len & ~1);
+	SMC_PUSH_DATA(lp, buf, len & ~1);
 
 	/* Send final ctl word with the last byte if there is one */
-	SMC_outw(((len & 1) ? (0x2000 | buf[len-1]) : 0), ioaddr, DATA_REG);
+	SMC_outw(((len & 1) ? (0x2000 | buf[len-1]) : 0), ioaddr, DATA_REG(lp));
 
 	/*
 	 * If THROTTLE_TX_PKTS is set, we stop the queue here. This will
@@ -634,14 +634,14 @@ static void smc_hardware_send_pkt(unsigned long data)
 		netif_stop_queue(dev);
 
 	/* queue the packet for TX */
-	SMC_SET_MMU_CMD(MC_ENQUEUE);
+	SMC_SET_MMU_CMD(lp, MC_ENQUEUE);
 	smc_special_unlock(&lp->lock);
 
 	dev->trans_start = jiffies;
 	dev->stats.tx_packets++;
 	dev->stats.tx_bytes += len;
 
-	SMC_ENABLE_INT(IM_TX_INT | IM_TX_EMPTY_INT);
+	SMC_ENABLE_INT(lp, IM_TX_INT | IM_TX_EMPTY_INT);
 
 done:	if (!THROTTLE_TX_PKTS)
 		netif_wake_queue(dev);
@@ -688,7 +688,7 @@ static int smc_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	smc_special_lock(&lp->lock);
 
 	/* now, try to allocate the memory */
-	SMC_SET_MMU_CMD(MC_ALLOC | numPages);
+	SMC_SET_MMU_CMD(lp, MC_ALLOC | numPages);
 
 	/*
 	 * Poll the chip for a short amount of time in case the
@@ -696,9 +696,9 @@ static int smc_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	 */
 	poll_count = MEMORY_WAIT_TIME;
 	do {
-		status = SMC_GET_INT();
+		status = SMC_GET_INT(lp);
 		if (status & IM_ALLOC_INT) {
-			SMC_ACK_INT(IM_ALLOC_INT);
+			SMC_ACK_INT(lp, IM_ALLOC_INT);
   			break;
 		}
    	} while (--poll_count);
@@ -710,7 +710,7 @@ static int smc_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		/* oh well, wait until the chip finds memory later */
 		netif_stop_queue(dev);
 		DBG(2, "%s: TX memory allocation deferred.\n", dev->name);
-		SMC_ENABLE_INT(IM_ALLOC_INT);
+		SMC_ENABLE_INT(lp, IM_ALLOC_INT);
    	} else {
 		/*
 		 * Allocation succeeded: push packet to the chip's own memory
@@ -736,19 +736,19 @@ static void smc_tx(struct net_device *dev)
 	DBG(3, "%s: %s\n", dev->name, __FUNCTION__);
 
 	/* If the TX FIFO is empty then nothing to do */
-	packet_no = SMC_GET_TXFIFO();
+	packet_no = SMC_GET_TXFIFO(lp);
 	if (unlikely(packet_no & TXFIFO_TEMPTY)) {
 		PRINTK("%s: smc_tx with nothing on FIFO.\n", dev->name);
 		return;
 	}
 
 	/* select packet to read from */
-	saved_packet = SMC_GET_PN();
-	SMC_SET_PN(packet_no);
+	saved_packet = SMC_GET_PN(lp);
+	SMC_SET_PN(lp, packet_no);
 
 	/* read the first word (status word) from this packet */
-	SMC_SET_PTR(PTR_AUTOINC | PTR_READ);
-	SMC_GET_PKT_HDR(tx_status, pkt_len);
+	SMC_SET_PTR(lp, PTR_AUTOINC | PTR_READ);
+	SMC_GET_PKT_HDR(lp, tx_status, pkt_len);
 	DBG(2, "%s: TX STATUS 0x%04x PNR 0x%02x\n",
 		dev->name, tx_status, packet_no);
 
@@ -771,17 +771,17 @@ static void smc_tx(struct net_device *dev)
 	}
 
 	/* kill the packet */
-	SMC_WAIT_MMU_BUSY();
-	SMC_SET_MMU_CMD(MC_FREEPKT);
+	SMC_WAIT_MMU_BUSY(lp);
+	SMC_SET_MMU_CMD(lp, MC_FREEPKT);
 
 	/* Don't restore Packet Number Reg until busy bit is cleared */
-	SMC_WAIT_MMU_BUSY();
-	SMC_SET_PN(saved_packet);
+	SMC_WAIT_MMU_BUSY(lp);
+	SMC_SET_PN(lp, saved_packet);
 
 	/* re-enable transmit */
-	SMC_SELECT_BANK(0);
-	SMC_SET_TCR(lp->tcr_cur_mode);
-	SMC_SELECT_BANK(2);
+	SMC_SELECT_BANK(lp, 0);
+	SMC_SET_TCR(lp, lp->tcr_cur_mode);
+	SMC_SELECT_BANK(lp, 2);
 }
 
 
@@ -793,7 +793,7 @@ static void smc_mii_out(struct net_device *dev, unsigned int val, int bits)
 	void __iomem *ioaddr = lp->base;
 	unsigned int mii_reg, mask;
 
-	mii_reg = SMC_GET_MII() & ~(MII_MCLK | MII_MDOE | MII_MDO);
+	mii_reg = SMC_GET_MII(lp) & ~(MII_MCLK | MII_MDOE | MII_MDO);
 	mii_reg |= MII_MDOE;
 
 	for (mask = 1 << (bits - 1); mask; mask >>= 1) {
@@ -802,9 +802,9 @@ static void smc_mii_out(struct net_device *dev, unsigned int val, int bits)
 		else
 			mii_reg &= ~MII_MDO;
 
-		SMC_SET_MII(mii_reg);
+		SMC_SET_MII(lp, mii_reg);
 		udelay(MII_DELAY);
-		SMC_SET_MII(mii_reg | MII_MCLK);
+		SMC_SET_MII(lp, mii_reg | MII_MCLK);
 		udelay(MII_DELAY);
 	}
 }
@@ -815,16 +815,16 @@ static unsigned int smc_mii_in(struct net_device *dev, int bits)
 	void __iomem *ioaddr = lp->base;
 	unsigned int mii_reg, mask, val;
 
-	mii_reg = SMC_GET_MII() & ~(MII_MCLK | MII_MDOE | MII_MDO);
-	SMC_SET_MII(mii_reg);
+	mii_reg = SMC_GET_MII(lp) & ~(MII_MCLK | MII_MDOE | MII_MDO);
+	SMC_SET_MII(lp, mii_reg);
 
 	for (mask = 1 << (bits - 1), val = 0; mask; mask >>= 1) {
-		if (SMC_GET_MII() & MII_MDI)
+		if (SMC_GET_MII(lp) & MII_MDI)
 			val |= mask;
 
-		SMC_SET_MII(mii_reg);
+		SMC_SET_MII(lp, mii_reg);
 		udelay(MII_DELAY);
-		SMC_SET_MII(mii_reg | MII_MCLK);
+		SMC_SET_MII(lp, mii_reg | MII_MCLK);
 		udelay(MII_DELAY);
 	}
 
@@ -840,7 +840,7 @@ static int smc_phy_read(struct net_device *dev, int phyaddr, int phyreg)
 	void __iomem *ioaddr = lp->base;
 	unsigned int phydata;
 
-	SMC_SELECT_BANK(3);
+	SMC_SELECT_BANK(lp, 3);
 
 	/* Idle - 32 ones */
 	smc_mii_out(dev, 0xffffffff, 32);
@@ -852,12 +852,12 @@ static int smc_phy_read(struct net_device *dev, int phyaddr, int phyreg)
 	phydata = smc_mii_in(dev, 18);
 
 	/* Return to idle state */
-	SMC_SET_MII(SMC_GET_MII() & ~(MII_MCLK|MII_MDOE|MII_MDO));
+	SMC_SET_MII(lp, SMC_GET_MII(lp) & ~(MII_MCLK|MII_MDOE|MII_MDO));
 
 	DBG(3, "%s: phyaddr=0x%x, phyreg=0x%x, phydata=0x%x\n",
 		__FUNCTION__, phyaddr, phyreg, phydata);
 
-	SMC_SELECT_BANK(2);
+	SMC_SELECT_BANK(lp, 2);
 	return phydata;
 }
 
@@ -870,7 +870,7 @@ static void smc_phy_write(struct net_device *dev, int phyaddr, int phyreg,
 	struct smc_local *lp = netdev_priv(dev);
 	void __iomem *ioaddr = lp->base;
 
-	SMC_SELECT_BANK(3);
+	SMC_SELECT_BANK(lp, 3);
 
 	/* Idle - 32 ones */
 	smc_mii_out(dev, 0xffffffff, 32);
@@ -879,12 +879,12 @@ static void smc_phy_write(struct net_device *dev, int phyaddr, int phyreg,
 	smc_mii_out(dev, 5 << 28 | phyaddr << 23 | phyreg << 18 | 2 << 16 | phydata, 32);
 
 	/* Return to idle state */
-	SMC_SET_MII(SMC_GET_MII() & ~(MII_MCLK|MII_MDOE|MII_MDO));
+	SMC_SET_MII(lp, SMC_GET_MII(lp) & ~(MII_MCLK|MII_MDOE|MII_MDO));
 
 	DBG(3, "%s: phyaddr=0x%x, phyreg=0x%x, phydata=0x%x\n",
 		__FUNCTION__, phyaddr, phyreg, phydata);
 
-	SMC_SELECT_BANK(2);
+	SMC_SELECT_BANK(lp, 2);
 }
 
 /*
@@ -957,9 +957,9 @@ static int smc_phy_fixed(struct net_device *dev)
 	smc_phy_write(dev, phyaddr, MII_BMCR, bmcr);
 
 	/* Re-Configure the Receive/Phy Control register */
-	SMC_SELECT_BANK(0);
-	SMC_SET_RPC(lp->rpc_cur_mode);
-	SMC_SELECT_BANK(2);
+	SMC_SELECT_BANK(lp, 0);
+	SMC_SET_RPC(lp, lp->rpc_cur_mode);
+	SMC_SELECT_BANK(lp, 2);
 
 	return 1;
 }
@@ -1050,8 +1050,8 @@ static void smc_phy_check_media(struct net_device *dev, int init)
 			lp->tcr_cur_mode &= ~TCR_SWFDUP;
 		}
 
-		SMC_SELECT_BANK(0);
-		SMC_SET_TCR(lp->tcr_cur_mode);
+		SMC_SELECT_BANK(lp, 0);
+		SMC_SET_TCR(lp, lp->tcr_cur_mode);
 	}
 }
 
@@ -1100,8 +1100,8 @@ static void smc_phy_configure(struct work_struct *work)
 		PHY_INT_SPDDET | PHY_INT_DPLXDET);
 
 	/* Configure the Receive/Phy Control register */
-	SMC_SELECT_BANK(0);
-	SMC_SET_RPC(lp->rpc_cur_mode);
+	SMC_SELECT_BANK(lp, 0);
+	SMC_SET_RPC(lp, lp->rpc_cur_mode);
 
 	/* If the user requested no auto neg, then go set his request */
 	if (lp->mii.force_media) {
@@ -1158,7 +1158,7 @@ static void smc_phy_configure(struct work_struct *work)
 	smc_phy_check_media(dev, 1);
 
 smc_phy_configure_exit:
-	SMC_SELECT_BANK(2);
+	SMC_SELECT_BANK(lp, 2);
 	spin_unlock_irq(&lp->lock);
 	lp->work_pending = 0;
 }
@@ -1200,9 +1200,9 @@ static void smc_10bt_check_media(struct net_device *dev, int init)
 
 	old_carrier = netif_carrier_ok(dev) ? 1 : 0;
 
-	SMC_SELECT_BANK(0);
-	new_carrier = (SMC_GET_EPH_STATUS() & ES_LINK_OK) ? 1 : 0;
-	SMC_SELECT_BANK(2);
+	SMC_SELECT_BANK(lp, 0);
+	new_carrier = (SMC_GET_EPH_STATUS(lp) & ES_LINK_OK) ? 1 : 0;
+	SMC_SELECT_BANK(lp, 2);
 
 	if (init || (old_carrier != new_carrier)) {
 		if (!new_carrier) {
@@ -1224,11 +1224,11 @@ static void smc_eph_interrupt(struct net_device *dev)
 
 	smc_10bt_check_media(dev, 0);
 
-	SMC_SELECT_BANK(1);
-	ctl = SMC_GET_CTL();
-	SMC_SET_CTL(ctl & ~CTL_LE_ENABLE);
-	SMC_SET_CTL(ctl);
-	SMC_SELECT_BANK(2);
+	SMC_SELECT_BANK(lp, 1);
+	ctl = SMC_GET_CTL(lp);
+	SMC_SET_CTL(lp, ctl & ~CTL_LE_ENABLE);
+	SMC_SET_CTL(lp, ctl);
+	SMC_SELECT_BANK(lp, 2);
 }
 
 /*
@@ -1252,22 +1252,22 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id)
 	 * ISR. */
 	SMC_INTERRUPT_PREAMBLE;
 
-	saved_pointer = SMC_GET_PTR();
-	mask = SMC_GET_INT_MASK();
-	SMC_SET_INT_MASK(0);
+	saved_pointer = SMC_GET_PTR(lp);
+	mask = SMC_GET_INT_MASK(lp);
+	SMC_SET_INT_MASK(lp, 0);
 
 	/* set a timeout value, so I don't stay here forever */
 	timeout = MAX_IRQ_LOOPS;
 
 	do {
-		status = SMC_GET_INT();
+		status = SMC_GET_INT(lp);
 
 		DBG(2, "%s: INT 0x%02x MASK 0x%02x MEM 0x%04x FIFO 0x%04x\n",
 			dev->name, status, mask,
-			({ int meminfo; SMC_SELECT_BANK(0);
-			   meminfo = SMC_GET_MIR();
-			   SMC_SELECT_BANK(2); meminfo; }),
-			SMC_GET_FIFO());
+			({ int meminfo; SMC_SELECT_BANK(lp, 0);
+			   meminfo = SMC_GET_MIR(lp);
+			   SMC_SELECT_BANK(lp, 2); meminfo; }),
+			SMC_GET_FIFO(lp));
 
 		status &= mask;
 		if (!status)
@@ -1277,7 +1277,7 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id)
 			/* do this before RX as it will free memory quickly */
 			DBG(3, "%s: TX int\n", dev->name);
 			smc_tx(dev);
-			SMC_ACK_INT(IM_TX_INT);
+			SMC_ACK_INT(lp, IM_TX_INT);
 			if (THROTTLE_TX_PKTS)
 				netif_wake_queue(dev);
 		} else if (status & IM_RCV_INT) {
@@ -1292,9 +1292,9 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id)
 			mask &= ~IM_TX_EMPTY_INT;
 
 			/* update stats */
-			SMC_SELECT_BANK(0);
-			card_stats = SMC_GET_COUNTER();
-			SMC_SELECT_BANK(2);
+			SMC_SELECT_BANK(lp, 0);
+			card_stats = SMC_GET_COUNTER(lp);
+			SMC_SELECT_BANK(lp, 2);
 
 			/* single collisions */
 			dev->stats.collisions += card_stats & 0xF;
@@ -1304,26 +1304,26 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id)
 			dev->stats.collisions += card_stats & 0xF;
 		} else if (status & IM_RX_OVRN_INT) {
 			DBG(1, "%s: RX overrun (EPH_ST 0x%04x)\n", dev->name,
-			       ({ int eph_st; SMC_SELECT_BANK(0);
-				  eph_st = SMC_GET_EPH_STATUS();
-				  SMC_SELECT_BANK(2); eph_st; }) );
-			SMC_ACK_INT(IM_RX_OVRN_INT);
+			       ({ int eph_st; SMC_SELECT_BANK(lp, 0);
+				  eph_st = SMC_GET_EPH_STATUS(lp);
+				  SMC_SELECT_BANK(lp, 2); eph_st; }));
+			SMC_ACK_INT(lp, IM_RX_OVRN_INT);
 			dev->stats.rx_errors++;
 			dev->stats.rx_fifo_errors++;
 		} else if (status & IM_EPH_INT) {
 			smc_eph_interrupt(dev);
 		} else if (status & IM_MDINT) {
-			SMC_ACK_INT(IM_MDINT);
+			SMC_ACK_INT(lp, IM_MDINT);
 			smc_phy_interrupt(dev);
 		} else if (status & IM_ERCV_INT) {
-			SMC_ACK_INT(IM_ERCV_INT);
+			SMC_ACK_INT(lp, IM_ERCV_INT);
 			PRINTK("%s: UNSUPPORTED: ERCV INTERRUPT \n", dev->name);
 		}
 	} while (--timeout);
 
 	/* restore register states */
-	SMC_SET_PTR(saved_pointer);
-	SMC_SET_INT_MASK(mask);
+	SMC_SET_PTR(lp, saved_pointer);
+	SMC_SET_INT_MASK(lp, mask);
 	spin_unlock(&lp->lock);
 
 	if (timeout == MAX_IRQ_LOOPS)
@@ -1366,13 +1366,13 @@ static void smc_timeout(struct net_device *dev)
 	DBG(2, "%s: %s\n", dev->name, __FUNCTION__);
 
 	spin_lock_irq(&lp->lock);
-	status = SMC_GET_INT();
-	mask = SMC_GET_INT_MASK();
-	fifo = SMC_GET_FIFO();
-	SMC_SELECT_BANK(0);
-	eph_st = SMC_GET_EPH_STATUS();
-	meminfo = SMC_GET_MIR();
-	SMC_SELECT_BANK(2);
+	status = SMC_GET_INT(lp);
+	mask = SMC_GET_INT_MASK(lp);
+	fifo = SMC_GET_FIFO(lp);
+	SMC_SELECT_BANK(lp, 0);
+	eph_st = SMC_GET_EPH_STATUS(lp);
+	meminfo = SMC_GET_MIR(lp);
+	SMC_SELECT_BANK(lp, 2);
 	spin_unlock_irq(&lp->lock);
 	PRINTK( "%s: TX timeout (INT 0x%02x INTMASK 0x%02x "
 		"MEM 0x%04x FIFO 0x%04x EPH_ST 0x%04x)\n",
@@ -1492,13 +1492,13 @@ static void smc_set_multicast_list(struct net_device *dev)
 	}
 
 	spin_lock_irq(&lp->lock);
-	SMC_SELECT_BANK(0);
-	SMC_SET_RCR(lp->rcr_cur_mode);
+	SMC_SELECT_BANK(lp, 0);
+	SMC_SET_RCR(lp, lp->rcr_cur_mode);
 	if (update_multicast) {
-		SMC_SELECT_BANK(3);
-		SMC_SET_MCAST(multicast_table);
+		SMC_SELECT_BANK(lp, 3);
+		SMC_SET_MCAST(lp, multicast_table);
 	}
-	SMC_SELECT_BANK(2);
+	SMC_SELECT_BANK(lp, 2);
 	spin_unlock_irq(&lp->lock);
 }
 
@@ -1702,8 +1702,9 @@ static const struct ethtool_ops smc_ethtool_ops = {
  * I just deleted auto_irq.c, since it was never built...
  *   --jgarzik
  */
-static int __init smc_findirq(void __iomem *ioaddr)
+static int __init smc_findirq(struct smc_local *lp)
 {
+	void __iomem *ioaddr = lp->base;
 	int timeout = 20;
 	unsigned long cookie;
 
@@ -1717,14 +1718,14 @@ static int __init smc_findirq(void __iomem *ioaddr)
 	 * when done.
 	 */
 	/* enable ALLOCation interrupts ONLY */
-	SMC_SELECT_BANK(2);
-	SMC_SET_INT_MASK(IM_ALLOC_INT);
+	SMC_SELECT_BANK(lp, 2);
+	SMC_SET_INT_MASK(lp, IM_ALLOC_INT);
 
 	/*
  	 * Allocate 512 bytes of memory.  Note that the chip was just
 	 * reset so all the memory is available
 	 */
-	SMC_SET_MMU_CMD(MC_ALLOC | 1);
+	SMC_SET_MMU_CMD(lp, MC_ALLOC | 1);
 
 	/*
 	 * Wait until positive that the interrupt has been generated
@@ -1732,7 +1733,7 @@ static int __init smc_findirq(void __iomem *ioaddr)
 	do {
 		int int_status;
 		udelay(10);
-		int_status = SMC_GET_INT();
+		int_status = SMC_GET_INT(lp);
 		if (int_status & IM_ALLOC_INT)
 			break;		/* got the interrupt */
 	} while (--timeout);
@@ -1745,7 +1746,7 @@ static int __init smc_findirq(void __iomem *ioaddr)
 	 */
 
 	/* and disable all interrupts again */
-	SMC_SET_INT_MASK(0);
+	SMC_SET_INT_MASK(lp, 0);
 
 	/* and return what I found */
 	return probe_irq_off(cookie);
@@ -1788,7 +1789,7 @@ static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr,
 	DBG(2, "%s: %s\n", CARDNAME, __FUNCTION__);
 
 	/* First, see if the high byte is 0x33 */
-	val = SMC_CURRENT_BANK();
+	val = SMC_CURRENT_BANK(lp);
 	DBG(2, "%s: bank signature probe returned 0x%04x\n", CARDNAME, val);
 	if ((val & 0xFF00) != 0x3300) {
 		if ((val & 0xFF) == 0x33) {
@@ -1804,8 +1805,8 @@ static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr,
 	 * The above MIGHT indicate a device, but I need to write to
 	 * further test this.
 	 */
-	SMC_SELECT_BANK(0);
-	val = SMC_CURRENT_BANK();
+	SMC_SELECT_BANK(lp, 0);
+	val = SMC_CURRENT_BANK(lp);
 	if ((val & 0xFF00) != 0x3300) {
 		retval = -ENODEV;
 		goto err_out;
@@ -1817,8 +1818,8 @@ static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr,
 	 * register to bank 1, so I can access the base address
 	 * register
 	 */
-	SMC_SELECT_BANK(1);
-	val = SMC_GET_BASE();
+	SMC_SELECT_BANK(lp, 1);
+	val = SMC_GET_BASE(lp);
 	val = ((val & 0x1F00) >> 3) << SMC_IO_SHIFT;
 	if (((unsigned int)ioaddr & (0x3e0 << SMC_IO_SHIFT)) != val) {
 		printk("%s: IOADDR %p doesn't match configuration (%x).\n",
@@ -1830,8 +1831,8 @@ static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr,
 	 * recognize.  These might need to be added to later,
 	 * as future revisions could be added.
 	 */
-	SMC_SELECT_BANK(3);
-	revision_register = SMC_GET_REV();
+	SMC_SELECT_BANK(lp, 3);
+	revision_register = SMC_GET_REV(lp);
 	DBG(2, "%s: revision = 0x%04x\n", CARDNAME, revision_register);
 	version_string = chip_ids[ (revision_register >> 4) & 0xF];
 	if (!version_string || (revision_register & 0xff00) != 0x3300) {
@@ -1855,8 +1856,8 @@ static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr,
 	spin_lock_init(&lp->lock);
 
 	/* Get the MAC address */
-	SMC_SELECT_BANK(1);
-	SMC_GET_MAC_ADDR(dev->dev_addr);
+	SMC_SELECT_BANK(lp, 1);
+	SMC_GET_MAC_ADDR(lp, dev->dev_addr);
 
 	/* now, reset the chip, and put it into a known state */
 	smc_reset(dev);
@@ -1881,7 +1882,7 @@ static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr,
 
 		trials = 3;
 		while (trials--) {
-			dev->irq = smc_findirq(ioaddr);
+			dev->irq = smc_findirq(lp);
 			if (dev->irq)
 				break;
 			/* kick the card and try again */

drivers/net/smc91x.h

@@ -720,7 +720,7 @@ smc_pxa_dma_irq(int dma, void *dummy)
 
 // Transmit Control Register
 /* BANK 0  */
-#define TCR_REG 	SMC_REG(0x0000, 0)
+#define TCR_REG(lp) 	SMC_REG(lp, 0x0000, 0)
 #define TCR_ENABLE	0x0001	// When 1 we can transmit
 #define TCR_LOOP	0x0002	// Controls output pin LBK
 #define TCR_FORCOL	0x0004	// When 1 will force a collision
@@ -739,7 +739,7 @@ smc_pxa_dma_irq(int dma, void *dummy)
 
 // EPH Status Register
 /* BANK 0  */
-#define EPH_STATUS_REG	SMC_REG(0x0002, 0)
+#define EPH_STATUS_REG(lp)	SMC_REG(lp, 0x0002, 0)
 #define ES_TX_SUC	0x0001	// Last TX was successful
 #define ES_SNGL_COL	0x0002	// Single collision detected for last tx
 #define ES_MUL_COL	0x0004	// Multiple collisions detected for last tx
@@ -758,7 +758,7 @@ smc_pxa_dma_irq(int dma, void *dummy)
 
 // Receive Control Register
 /* BANK 0  */
-#define RCR_REG		SMC_REG(0x0004, 0)
+#define RCR_REG(lp)		SMC_REG(lp, 0x0004, 0)
 #define RCR_RX_ABORT	0x0001	// Set if a rx frame was aborted
 #define RCR_PRMS	0x0002	// Enable promiscuous mode
 #define RCR_ALMUL	0x0004	// When set accepts all multicast frames
@@ -775,17 +775,17 @@ smc_pxa_dma_irq(int dma, void *dummy)
 
 // Counter Register
 /* BANK 0  */
-#define COUNTER_REG	SMC_REG(0x0006, 0)
+#define COUNTER_REG(lp)	SMC_REG(lp, 0x0006, 0)
 
 
 // Memory Information Register
 /* BANK 0  */
-#define MIR_REG		SMC_REG(0x0008, 0)
+#define MIR_REG(lp)		SMC_REG(lp, 0x0008, 0)
 
 
 // Receive/Phy Control Register
 /* BANK 0  */
-#define RPC_REG		SMC_REG(0x000A, 0)
+#define RPC_REG(lp)		SMC_REG(lp, 0x000A, 0)
 #define RPC_SPEED	0x2000	// When 1 PHY is in 100Mbps mode.
 #define RPC_DPLX	0x1000	// When 1 PHY is in Full-Duplex Mode
 #define RPC_ANEG	0x0800	// When 1 PHY is in Auto-Negotiate Mode
@@ -819,7 +819,7 @@ smc_pxa_dma_irq(int dma, void *dummy)
 
 // Configuration Reg
 /* BANK 1 */
-#define CONFIG_REG	SMC_REG(0x0000,	1)
+#define CONFIG_REG(lp)	SMC_REG(lp, 0x0000,	1)
 #define CONFIG_EXT_PHY	0x0200	// 1=external MII, 0=internal Phy
 #define CONFIG_GPCNTRL	0x0400	// Inverse value drives pin nCNTRL
 #define CONFIG_NO_WAIT	0x1000	// When 1 no extra wait states on ISA bus
@@ -831,24 +831,24 @@ smc_pxa_dma_irq(int dma, void *dummy)
 
 // Base Address Register
 /* BANK 1 */
-#define BASE_REG	SMC_REG(0x0002, 1)
+#define BASE_REG(lp)	SMC_REG(lp, 0x0002, 1)
 
 
 // Individual Address Registers
 /* BANK 1 */
-#define ADDR0_REG	SMC_REG(0x0004, 1)
-#define ADDR1_REG	SMC_REG(0x0006, 1)
-#define ADDR2_REG	SMC_REG(0x0008, 1)
+#define ADDR0_REG(lp)	SMC_REG(lp, 0x0004, 1)
+#define ADDR1_REG(lp)	SMC_REG(lp, 0x0006, 1)
+#define ADDR2_REG(lp)	SMC_REG(lp, 0x0008, 1)
 
 
 // General Purpose Register
 /* BANK 1 */
-#define GP_REG		SMC_REG(0x000A, 1)
+#define GP_REG(lp)		SMC_REG(lp, 0x000A, 1)
 
 
 // Control Register
 /* BANK 1 */
-#define CTL_REG		SMC_REG(0x000C, 1)
+#define CTL_REG(lp)		SMC_REG(lp, 0x000C, 1)
 #define CTL_RCV_BAD	0x4000 // When 1 bad CRC packets are received
 #define CTL_AUTO_RELEASE 0x0800 // When 1 tx pages are released automatically
 #define CTL_LE_ENABLE	0x0080 // When 1 enables Link Error interrupt
@@ -861,7 +861,7 @@ smc_pxa_dma_irq(int dma, void *dummy)
 
 // MMU Command Register
 /* BANK 2 */
-#define MMU_CMD_REG	SMC_REG(0x0000, 2)
+#define MMU_CMD_REG(lp)	SMC_REG(lp, 0x0000, 2)
 #define MC_BUSY		1	// When 1 the last release has not completed
 #define MC_NOP		(0<<5)	// No Op
 #define MC_ALLOC	(1<<5) 	// OR with number of 256 byte packets
@@ -875,30 +875,30 @@ smc_pxa_dma_irq(int dma, void *dummy)
 
 // Packet Number Register
 /* BANK 2 */
-#define PN_REG		SMC_REG(0x0002, 2)
+#define PN_REG(lp)		SMC_REG(lp, 0x0002, 2)
 
 
 // Allocation Result Register
 /* BANK 2 */
-#define AR_REG		SMC_REG(0x0003, 2)
+#define AR_REG(lp)		SMC_REG(lp, 0x0003, 2)
 #define AR_FAILED	0x80	// Alocation Failed
 
 
 // TX FIFO Ports Register
 /* BANK 2 */
-#define TXFIFO_REG	SMC_REG(0x0004, 2)
+#define TXFIFO_REG(lp)	SMC_REG(lp, 0x0004, 2)
 #define TXFIFO_TEMPTY	0x80	// TX FIFO Empty
 
 // RX FIFO Ports Register
 /* BANK 2 */
-#define RXFIFO_REG	SMC_REG(0x0005, 2)
+#define RXFIFO_REG(lp)	SMC_REG(lp, 0x0005, 2)
 #define RXFIFO_REMPTY	0x80	// RX FIFO Empty
 
-#define FIFO_REG	SMC_REG(0x0004, 2)
+#define FIFO_REG(lp)	SMC_REG(lp, 0x0004, 2)
 
 // Pointer Register
 /* BANK 2 */
-#define PTR_REG		SMC_REG(0x0006, 2)
+#define PTR_REG(lp)		SMC_REG(lp, 0x0006, 2)
 #define PTR_RCV		0x8000 // 1=Receive area, 0=Transmit area
 #define PTR_AUTOINC 	0x4000 // Auto increment the pointer on each access
 #define PTR_READ	0x2000 // When 1 the operation is a read
@@ -906,17 +906,17 @@ smc_pxa_dma_irq(int dma, void *dummy)
 
 // Data Register
 /* BANK 2 */
-#define DATA_REG	SMC_REG(0x0008, 2)
+#define DATA_REG(lp)	SMC_REG(lp, 0x0008, 2)
 
 
 // Interrupt Status/Acknowledge Register
 /* BANK 2 */
-#define INT_REG		SMC_REG(0x000C, 2)
+#define INT_REG(lp)		SMC_REG(lp, 0x000C, 2)
 
 
 // Interrupt Mask Register
 /* BANK 2 */
-#define IM_REG		SMC_REG(0x000D, 2)
+#define IM_REG(lp)		SMC_REG(lp, 0x000D, 2)
 #define IM_MDINT	0x80 // PHY MI Register 18 Interrupt
 #define IM_ERCV_INT	0x40 // Early Receive Interrupt
 #define IM_EPH_INT	0x20 // Set by Ethernet Protocol Handler section
@@ -929,15 +929,15 @@ smc_pxa_dma_irq(int dma, void *dummy)
 
 // Multicast Table Registers
 /* BANK 3 */
-#define MCAST_REG1	SMC_REG(0x0000, 3)
-#define MCAST_REG2	SMC_REG(0x0002, 3)
-#define MCAST_REG3	SMC_REG(0x0004, 3)
-#define MCAST_REG4	SMC_REG(0x0006, 3)
+#define MCAST_REG1(lp)	SMC_REG(lp, 0x0000, 3)
+#define MCAST_REG2(lp)	SMC_REG(lp, 0x0002, 3)
+#define MCAST_REG3(lp)	SMC_REG(lp, 0x0004, 3)
+#define MCAST_REG4(lp)	SMC_REG(lp, 0x0006, 3)
 
 
 // Management Interface Register (MII)
 /* BANK 3 */
-#define MII_REG		SMC_REG(0x0008, 3)
+#define MII_REG(lp)		SMC_REG(lp, 0x0008, 3)
 #define MII_MSK_CRS100	0x4000 // Disables CRS100 detection during tx half dup
 #define MII_MDOE	0x0008 // MII Output Enable
 #define MII_MCLK	0x0004 // MII Clock, pin MDCLK
@@ -948,20 +948,20 @@ smc_pxa_dma_irq(int dma, void *dummy)
 // Revision Register
 /* BANK 3 */
 /* ( hi: chip id   low: rev # ) */
-#define REV_REG		SMC_REG(0x000A, 3)
+#define REV_REG(lp)		SMC_REG(lp, 0x000A, 3)
 
 
 // Early RCV Register
 /* BANK 3 */
 /* this is NOT on SMC9192 */
-#define ERCV_REG	SMC_REG(0x000C, 3)
+#define ERCV_REG(lp)	SMC_REG(lp, 0x000C, 3)
 #define ERCV_RCV_DISCRD	0x0080 // When 1 discards a packet being received
 #define ERCV_THRESHOLD	0x001F // ERCV Threshold Mask
 
 
 // External Register
 /* BANK 7 */
-#define EXT_REG		SMC_REG(0x0000, 7)
+#define EXT_REG(lp)		SMC_REG(lp, 0x0000, 7)
 
 
 #define CHIP_9192	3
@@ -1085,9 +1085,9 @@ static const char * chip_ids[ 16 ] =  {
  */
 
 #if SMC_DEBUG > 0
-#define SMC_REG(reg, bank)						\
+#define SMC_REG(lp, reg, bank)					\
 	({								\
-		int __b = SMC_CURRENT_BANK();				\
+		int __b = SMC_CURRENT_BANK(lp);			\
 		if (unlikely((__b & ~0xf0) != (0x3300 | bank))) {	\
 			printk( "%s: bank reg screwed (0x%04x)\n",	\
 				CARDNAME, __b );			\
@@ -1096,7 +1096,7 @@ static const char * chip_ids[ 16 ] =  {
 		reg<<SMC_IO_SHIFT;					\
 	})
 #else
-#define SMC_REG(reg, bank)	(reg<<SMC_IO_SHIFT)
+#define SMC_REG(lp, reg, bank)	(reg<<SMC_IO_SHIFT)
 #endif
 
 /*
@@ -1110,65 +1110,65 @@ static const char * chip_ids[ 16 ] =  {
  */
 #define SMC_MUST_ALIGN_WRITE	SMC_CAN_USE_32BIT
 
-#define SMC_GET_PN()							\
-	( SMC_CAN_USE_8BIT	? (SMC_inb(ioaddr, PN_REG))		\
-				: (SMC_inw(ioaddr, PN_REG) & 0xFF) )
+#define SMC_GET_PN(lp)						\
+	(SMC_CAN_USE_8BIT	? (SMC_inb(ioaddr, PN_REG(lp)))	\
+				: (SMC_inw(ioaddr, PN_REG(lp)) & 0xFF))
 
-#define SMC_SET_PN(x)							\
+#define SMC_SET_PN(lp, x)						\
 	do {								\
 		if (SMC_MUST_ALIGN_WRITE)				\
-			SMC_outl((x)<<16, ioaddr, SMC_REG(0, 2));	\
+			SMC_outl((x)<<16, ioaddr, SMC_REG(lp, 0, 2));	\
 		else if (SMC_CAN_USE_8BIT)				\
-			SMC_outb(x, ioaddr, PN_REG);			\
+			SMC_outb(x, ioaddr, PN_REG(lp));		\
 		else							\
-			SMC_outw(x, ioaddr, PN_REG);			\
+			SMC_outw(x, ioaddr, PN_REG(lp));		\
 	} while (0)
 
-#define SMC_GET_AR()							\
-	( SMC_CAN_USE_8BIT	? (SMC_inb(ioaddr, AR_REG))		\
-	  			: (SMC_inw(ioaddr, PN_REG) >> 8) )
+#define SMC_GET_AR(lp)						\
+	(SMC_CAN_USE_8BIT	? (SMC_inb(ioaddr, AR_REG(lp)))	\
+				: (SMC_inw(ioaddr, PN_REG(lp)) >> 8))
 
-#define SMC_GET_TXFIFO()						\
-	( SMC_CAN_USE_8BIT	? (SMC_inb(ioaddr, TXFIFO_REG))		\
-				: (SMC_inw(ioaddr, TXFIFO_REG) & 0xFF) )
+#define SMC_GET_TXFIFO(lp)						\
+	(SMC_CAN_USE_8BIT	? (SMC_inb(ioaddr, TXFIFO_REG(lp)))	\
+				: (SMC_inw(ioaddr, TXFIFO_REG(lp)) & 0xFF))
 
-#define SMC_GET_RXFIFO()						\
-	  ( SMC_CAN_USE_8BIT	? (SMC_inb(ioaddr, RXFIFO_REG))		\
-				: (SMC_inw(ioaddr, TXFIFO_REG) >> 8) )
+#define SMC_GET_RXFIFO(lp)						\
+	(SMC_CAN_USE_8BIT	? (SMC_inb(ioaddr, RXFIFO_REG(lp)))	\
+				: (SMC_inw(ioaddr, TXFIFO_REG(lp)) >> 8))
 
-#define SMC_GET_INT()							\
-	( SMC_CAN_USE_8BIT	? (SMC_inb(ioaddr, INT_REG))		\
-				: (SMC_inw(ioaddr, INT_REG) & 0xFF) )
+#define SMC_GET_INT(lp)						\
+	(SMC_CAN_USE_8BIT	? (SMC_inb(ioaddr, INT_REG(lp)))	\
+				: (SMC_inw(ioaddr, INT_REG(lp)) & 0xFF))
 
-#define SMC_ACK_INT(x)							\
+#define SMC_ACK_INT(lp, x)						\
 	do {								\
 		if (SMC_CAN_USE_8BIT)					\
-			SMC_outb(x, ioaddr, INT_REG);			\
+			SMC_outb(x, ioaddr, INT_REG(lp));		\
 		else {							\
 			unsigned long __flags;				\
 			int __mask;					\
 			local_irq_save(__flags);			\
-			__mask = SMC_inw( ioaddr, INT_REG ) & ~0xff;	\
-			SMC_outw( __mask | (x), ioaddr, INT_REG );	\
+			__mask = SMC_inw(ioaddr, INT_REG(lp)) & ~0xff; \
+			SMC_outw(__mask | (x), ioaddr, INT_REG(lp));	\
 			local_irq_restore(__flags);			\
 		}							\
 	} while (0)
 
-#define SMC_GET_INT_MASK()						\
-	( SMC_CAN_USE_8BIT	? (SMC_inb(ioaddr, IM_REG))		\
-				: (SMC_inw( ioaddr, INT_REG ) >> 8) )
+#define SMC_GET_INT_MASK(lp)						\
+	(SMC_CAN_USE_8BIT	? (SMC_inb(ioaddr, IM_REG(lp)))	\
+				: (SMC_inw(ioaddr, INT_REG(lp)) >> 8))
 
-#define SMC_SET_INT_MASK(x)						\
+#define SMC_SET_INT_MASK(lp, x)					\
 	do {								\
 		if (SMC_CAN_USE_8BIT)					\
-			SMC_outb(x, ioaddr, IM_REG);			\
+			SMC_outb(x, ioaddr, IM_REG(lp));		\
 		else							\
-			SMC_outw((x) << 8, ioaddr, INT_REG);		\
+			SMC_outw((x) << 8, ioaddr, INT_REG(lp));	\
 	} while (0)
 
-#define SMC_CURRENT_BANK()	SMC_inw(ioaddr, BANK_SELECT)
+#define SMC_CURRENT_BANK(lp)	SMC_inw(ioaddr, BANK_SELECT)
 
-#define SMC_SELECT_BANK(x)						\
+#define SMC_SELECT_BANK(lp, x)					\
 	do {								\
 		if (SMC_MUST_ALIGN_WRITE)				\
 			SMC_outl((x)<<16, ioaddr, 12<<SMC_IO_SHIFT);	\
@@ -1176,118 +1176,119 @@ static const char * chip_ids[ 16 ] =  {
 			SMC_outw(x, ioaddr, BANK_SELECT);		\
 	} while (0)
 
-#define SMC_GET_BASE()		SMC_inw(ioaddr, BASE_REG)
+#define SMC_GET_BASE(lp)		SMC_inw(ioaddr, BASE_REG(lp))
 
-#define SMC_SET_BASE(x)		SMC_outw(x, ioaddr, BASE_REG)
+#define SMC_SET_BASE(lp, x)		SMC_outw(x, ioaddr, BASE_REG(lp))
 
-#define SMC_GET_CONFIG()	SMC_inw(ioaddr, CONFIG_REG)
+#define SMC_GET_CONFIG(lp)	SMC_inw(ioaddr, CONFIG_REG(lp))
 
-#define SMC_SET_CONFIG(x)	SMC_outw(x, ioaddr, CONFIG_REG)
+#define SMC_SET_CONFIG(lp, x)	SMC_outw(x, ioaddr, CONFIG_REG(lp))
 
-#define SMC_GET_COUNTER()	SMC_inw(ioaddr, COUNTER_REG)
+#define SMC_GET_COUNTER(lp)	SMC_inw(ioaddr, COUNTER_REG(lp))
 
-#define SMC_GET_CTL()		SMC_inw(ioaddr, CTL_REG)
+#define SMC_GET_CTL(lp)		SMC_inw(ioaddr, CTL_REG(lp))
 
-#define SMC_SET_CTL(x)		SMC_outw(x, ioaddr, CTL_REG)
+#define SMC_SET_CTL(lp, x)		SMC_outw(x, ioaddr, CTL_REG(lp))
 
-#define SMC_GET_MII()		SMC_inw(ioaddr, MII_REG)
+#define SMC_GET_MII(lp)		SMC_inw(ioaddr, MII_REG(lp))
 
-#define SMC_SET_MII(x)		SMC_outw(x, ioaddr, MII_REG)
+#define SMC_SET_MII(lp, x)		SMC_outw(x, ioaddr, MII_REG(lp))
 
-#define SMC_GET_MIR()		SMC_inw(ioaddr, MIR_REG)
+#define SMC_GET_MIR(lp)		SMC_inw(ioaddr, MIR_REG(lp))
 
-#define SMC_SET_MIR(x)		SMC_outw(x, ioaddr, MIR_REG)
+#define SMC_SET_MIR(lp, x)		SMC_outw(x, ioaddr, MIR_REG(lp))
 
-#define SMC_GET_MMU_CMD()	SMC_inw(ioaddr, MMU_CMD_REG)
+#define SMC_GET_MMU_CMD(lp)	SMC_inw(ioaddr, MMU_CMD_REG(lp))
 
-#define SMC_SET_MMU_CMD(x)	SMC_outw(x, ioaddr, MMU_CMD_REG)
+#define SMC_SET_MMU_CMD(lp, x)	SMC_outw(x, ioaddr, MMU_CMD_REG(lp))
 
-#define SMC_GET_FIFO()		SMC_inw(ioaddr, FIFO_REG)
+#define SMC_GET_FIFO(lp)		SMC_inw(ioaddr, FIFO_REG(lp))
 
-#define SMC_GET_PTR()		SMC_inw(ioaddr, PTR_REG)
+#define SMC_GET_PTR(lp)		SMC_inw(ioaddr, PTR_REG(lp))
 
-#define SMC_SET_PTR(x)							\
+#define SMC_SET_PTR(lp, x)						\
 	do {								\
 		if (SMC_MUST_ALIGN_WRITE)				\
-			SMC_outl((x)<<16, ioaddr, SMC_REG(4, 2));	\
+			SMC_outl((x)<<16, ioaddr, SMC_REG(lp, 4, 2));	\
 		else							\
-			SMC_outw(x, ioaddr, PTR_REG);			\
+			SMC_outw(x, ioaddr, PTR_REG(lp));		\
 	} while (0)
 
-#define SMC_GET_EPH_STATUS()	SMC_inw(ioaddr, EPH_STATUS_REG)
+#define SMC_GET_EPH_STATUS(lp)	SMC_inw(ioaddr, EPH_STATUS_REG(lp))
 
-#define SMC_GET_RCR()		SMC_inw(ioaddr, RCR_REG)
+#define SMC_GET_RCR(lp)		SMC_inw(ioaddr, RCR_REG(lp))
 
-#define SMC_SET_RCR(x)		SMC_outw(x, ioaddr, RCR_REG)
+#define SMC_SET_RCR(lp, x)		SMC_outw(x, ioaddr, RCR_REG(lp))
 
-#define SMC_GET_REV()		SMC_inw(ioaddr, REV_REG)
+#define SMC_GET_REV(lp)		SMC_inw(ioaddr, REV_REG(lp))
 
-#define SMC_GET_RPC()		SMC_inw(ioaddr, RPC_REG)
+#define SMC_GET_RPC(lp)		SMC_inw(ioaddr, RPC_REG(lp))
 
-#define SMC_SET_RPC(x)							\
+#define SMC_SET_RPC(lp, x)						\
 	do {								\
 		if (SMC_MUST_ALIGN_WRITE)				\
-			SMC_outl((x)<<16, ioaddr, SMC_REG(8, 0));	\
+			SMC_outl((x)<<16, ioaddr, SMC_REG(lp, 8, 0));	\
 		else							\
-			SMC_outw(x, ioaddr, RPC_REG);			\
+			SMC_outw(x, ioaddr, RPC_REG(lp));		\
 	} while (0)
 
-#define SMC_GET_TCR()		SMC_inw(ioaddr, TCR_REG)
+#define SMC_GET_TCR(lp)		SMC_inw(ioaddr, TCR_REG(lp))
 
-#define SMC_SET_TCR(x)		SMC_outw(x, ioaddr, TCR_REG)
+#define SMC_SET_TCR(lp, x)		SMC_outw(x, ioaddr, TCR_REG(lp))
 
 #ifndef SMC_GET_MAC_ADDR
-#define SMC_GET_MAC_ADDR(addr)						\
+#define SMC_GET_MAC_ADDR(lp, addr)					\
 	do {								\
 		unsigned int __v;					\
-		__v = SMC_inw( ioaddr, ADDR0_REG );			\
+		__v = SMC_inw(ioaddr, ADDR0_REG(lp));			\
 		addr[0] = __v; addr[1] = __v >> 8;			\
-		__v = SMC_inw( ioaddr, ADDR1_REG );			\
+		__v = SMC_inw(ioaddr, ADDR1_REG(lp));			\
 		addr[2] = __v; addr[3] = __v >> 8;			\
-		__v = SMC_inw( ioaddr, ADDR2_REG );			\
+		__v = SMC_inw(ioaddr, ADDR2_REG(lp));			\
 		addr[4] = __v; addr[5] = __v >> 8;			\
 	} while (0)
 #endif
 
-#define SMC_SET_MAC_ADDR(addr)						\
+#define SMC_SET_MAC_ADDR(lp, addr)					\
 	do {								\
-		SMC_outw( addr[0]|(addr[1] << 8), ioaddr, ADDR0_REG );	\
-		SMC_outw( addr[2]|(addr[3] << 8), ioaddr, ADDR1_REG );	\
-		SMC_outw( addr[4]|(addr[5] << 8), ioaddr, ADDR2_REG );	\
+		SMC_outw(addr[0]|(addr[1] << 8), ioaddr, ADDR0_REG(lp)); \
+		SMC_outw(addr[2]|(addr[3] << 8), ioaddr, ADDR1_REG(lp)); \
+		SMC_outw(addr[4]|(addr[5] << 8), ioaddr, ADDR2_REG(lp)); \
 	} while (0)
 
-#define SMC_SET_MCAST(x)						\
+#define SMC_SET_MCAST(lp, x)						\
 	do {								\
 		const unsigned char *mt = (x);				\
-		SMC_outw( mt[0] | (mt[1] << 8), ioaddr, MCAST_REG1 );	\
-		SMC_outw( mt[2] | (mt[3] << 8), ioaddr, MCAST_REG2 );	\
-		SMC_outw( mt[4] | (mt[5] << 8), ioaddr, MCAST_REG3 );	\
-		SMC_outw( mt[6] | (mt[7] << 8), ioaddr, MCAST_REG4 );	\
+		SMC_outw(mt[0] | (mt[1] << 8), ioaddr, MCAST_REG1(lp)); \
+		SMC_outw(mt[2] | (mt[3] << 8), ioaddr, MCAST_REG2(lp)); \
+		SMC_outw(mt[4] | (mt[5] << 8), ioaddr, MCAST_REG3(lp)); \
+		SMC_outw(mt[6] | (mt[7] << 8), ioaddr, MCAST_REG4(lp)); \
 	} while (0)
 
-#define SMC_PUT_PKT_HDR(status, length)					\
+#define SMC_PUT_PKT_HDR(lp, status, length)				\
 	do {								\
 		if (SMC_CAN_USE_32BIT)					\
-			SMC_outl((status) | (length)<<16, ioaddr, DATA_REG); \
+			SMC_outl((status) | (length)<<16, ioaddr,	\
+				 DATA_REG(lp));			\
 		else {							\
-			SMC_outw(status, ioaddr, DATA_REG);		\
-			SMC_outw(length, ioaddr, DATA_REG);		\
+			SMC_outw(status, ioaddr, DATA_REG(lp));	\
+			SMC_outw(length, ioaddr, DATA_REG(lp));	\
 		}							\
 	} while (0)
 
-#define SMC_GET_PKT_HDR(status, length)					\
+#define SMC_GET_PKT_HDR(lp, status, length)				\
 	do {								\
 		if (SMC_CAN_USE_32BIT) {				\
-			unsigned int __val = SMC_inl(ioaddr, DATA_REG);	\
+			unsigned int __val = SMC_inl(ioaddr, DATA_REG(lp)); \
 			(status) = __val & 0xffff;			\
 			(length) = __val >> 16;				\
 		} else {						\
-			(status) = SMC_inw(ioaddr, DATA_REG);		\
-			(length) = SMC_inw(ioaddr, DATA_REG);		\
+			(status) = SMC_inw(ioaddr, DATA_REG(lp));	\
+			(length) = SMC_inw(ioaddr, DATA_REG(lp));	\
 		}							\
 	} while (0)
 
-#define SMC_PUSH_DATA(p, l)						\
+#define SMC_PUSH_DATA(lp, p, l)					\
 	do {								\
 		if (SMC_CAN_USE_32BIT) {				\
 			void *__ptr = (p);				\
@@ -1295,23 +1296,25 @@ static const char * chip_ids[ 16 ] =  {
 			void __iomem *__ioaddr = ioaddr;		\
 			if (__len >= 2 && (unsigned long)__ptr & 2) {	\
 				__len -= 2;				\
-				SMC_outw(*(u16 *)__ptr, ioaddr, DATA_REG); \
+				SMC_outw(*(u16 *)__ptr, ioaddr,		\
+					DATA_REG(lp));		\
 				__ptr += 2;				\
 			}						\
 			if (SMC_CAN_USE_DATACS && lp->datacs)		\
 				__ioaddr = lp->datacs;			\
-			SMC_outsl(__ioaddr, DATA_REG, __ptr, __len>>2);	\
+			SMC_outsl(__ioaddr, DATA_REG(lp), __ptr, __len>>2); \
 			if (__len & 2) {				\
 				__ptr += (__len & ~3);			\
-				SMC_outw(*((u16 *)__ptr), ioaddr, DATA_REG); \
+				SMC_outw(*((u16 *)__ptr), ioaddr,	\
+					 DATA_REG(lp));		\
 			}						\
 		} else if (SMC_CAN_USE_16BIT)				\
-			SMC_outsw(ioaddr, DATA_REG, p, (l) >> 1);	\
+			SMC_outsw(ioaddr, DATA_REG(lp), p, (l) >> 1);	\
 		else if (SMC_CAN_USE_8BIT)				\
-			SMC_outsb(ioaddr, DATA_REG, p, l);		\
+			SMC_outsb(ioaddr, DATA_REG(lp), p, l);	\
 	} while (0)
 
-#define SMC_PULL_DATA(p, l)						\
+#define SMC_PULL_DATA(lp, p, l)					\
 	do {								\
 		if (SMC_CAN_USE_32BIT) {				\
 			void *__ptr = (p);				\
@@ -1333,16 +1336,17 @@ static const char * chip_ids[ 16 ] =  {
 				 */					\
 				__ptr -= 2;				\
 				__len += 2;				\
-				SMC_SET_PTR(2|PTR_READ|PTR_RCV|PTR_AUTOINC); \
+				SMC_SET_PTR(lp,			\
+					2|PTR_READ|PTR_RCV|PTR_AUTOINC); \
 			}						\
 			if (SMC_CAN_USE_DATACS && lp->datacs)		\
 				__ioaddr = lp->datacs;			\
 			__len += 2;					\
-			SMC_insl(__ioaddr, DATA_REG, __ptr, __len>>2);	\
+			SMC_insl(__ioaddr, DATA_REG(lp), __ptr, __len>>2); \
 		} else if (SMC_CAN_USE_16BIT)				\
-			SMC_insw(ioaddr, DATA_REG, p, (l) >> 1);	\
+			SMC_insw(ioaddr, DATA_REG(lp), p, (l) >> 1);	\
 		else if (SMC_CAN_USE_8BIT)				\
-			SMC_insb(ioaddr, DATA_REG, p, l);		\
+			SMC_insb(ioaddr, DATA_REG(lp), p, l);		\
 	} while (0)
 
 #endif  /* _SMC91X_H_ */