drivers/net/wireless/p54/net2280.h: silence checkpatch.pl

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/p54/net2280.h

@@ -37,292 +37,292 @@
 
 /* main registers, BAR0 + 0x0000 */
 struct net2280_regs {
-	// offset 0x0000
-	__le32                  devinit;
-#define     LOCAL_CLOCK_FREQUENCY                               8
-#define     FORCE_PCI_RESET                                     7
-#define     PCI_ID                                              6
-#define     PCI_ENABLE                                          5
-#define     FIFO_SOFT_RESET                                     4
-#define     CFG_SOFT_RESET                                      3
-#define     PCI_SOFT_RESET                                      2
-#define     USB_SOFT_RESET                                      1
-#define     M8051_RESET                                         0
-	__le32                  eectl;
-#define     EEPROM_ADDRESS_WIDTH                                23
-#define     EEPROM_CHIP_SELECT_ACTIVE                           22
-#define     EEPROM_PRESENT                                      21
-#define     EEPROM_VALID                                        20
-#define     EEPROM_BUSY                                         19
-#define     EEPROM_CHIP_SELECT_ENABLE                           18
-#define     EEPROM_BYTE_READ_START                              17
-#define     EEPROM_BYTE_WRITE_START                             16
-#define     EEPROM_READ_DATA                                    8
-#define     EEPROM_WRITE_DATA                                   0
-	__le32                  eeclkfreq;
-	u32                     _unused0;
-	// offset 0x0010
+	/* offset 0x0000 */
+	__le32			devinit;
+#define LOCAL_CLOCK_FREQUENCY					8
+#define FORCE_PCI_RESET						7
+#define PCI_ID							6
+#define PCI_ENABLE						5
+#define FIFO_SOFT_RESET						4
+#define CFG_SOFT_RESET						3
+#define PCI_SOFT_RESET						2
+#define USB_SOFT_RESET						1
+#define M8051_RESET						0
+	__le32			eectl;
+#define EEPROM_ADDRESS_WIDTH					23
+#define EEPROM_CHIP_SELECT_ACTIVE				22
+#define EEPROM_PRESENT						21
+#define EEPROM_VALID						20
+#define EEPROM_BUSY						19
+#define EEPROM_CHIP_SELECT_ENABLE				18
+#define EEPROM_BYTE_READ_START					17
+#define EEPROM_BYTE_WRITE_START					16
+#define EEPROM_READ_DATA					8
+#define EEPROM_WRITE_DATA					0
+	__le32			eeclkfreq;
+	u32			_unused0;
+	/* offset 0x0010 */
 
-	__le32                  pciirqenb0;	/* interrupt PCI master ... */
-#define     SETUP_PACKET_INTERRUPT_ENABLE                       7
-#define     ENDPOINT_F_INTERRUPT_ENABLE                         6
-#define     ENDPOINT_E_INTERRUPT_ENABLE                         5
-#define     ENDPOINT_D_INTERRUPT_ENABLE                         4
-#define     ENDPOINT_C_INTERRUPT_ENABLE                         3
-#define     ENDPOINT_B_INTERRUPT_ENABLE                         2
-#define     ENDPOINT_A_INTERRUPT_ENABLE                         1
-#define     ENDPOINT_0_INTERRUPT_ENABLE                         0
-	__le32                  pciirqenb1;
-#define     PCI_INTERRUPT_ENABLE                                31
-#define     POWER_STATE_CHANGE_INTERRUPT_ENABLE                 27
-#define     PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE                26
-#define     PCI_PARITY_ERROR_INTERRUPT_ENABLE                   25
-#define     PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE          20
-#define     PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE          19
-#define     PCI_TARGET_ABORT_ASSERTED_INTERRUPT_ENABLE          18
-#define     PCI_RETRY_ABORT_INTERRUPT_ENABLE                    17
-#define     PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE              16
-#define     GPIO_INTERRUPT_ENABLE                               13
-#define     DMA_D_INTERRUPT_ENABLE                              12
-#define     DMA_C_INTERRUPT_ENABLE                              11
-#define     DMA_B_INTERRUPT_ENABLE                              10
-#define     DMA_A_INTERRUPT_ENABLE                              9
-#define     EEPROM_DONE_INTERRUPT_ENABLE                        8
-#define     VBUS_INTERRUPT_ENABLE                               7
-#define     CONTROL_STATUS_INTERRUPT_ENABLE                     6
-#define     ROOT_PORT_RESET_INTERRUPT_ENABLE                    4
-#define     SUSPEND_REQUEST_INTERRUPT_ENABLE                    3
-#define     SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE             2
-#define     RESUME_INTERRUPT_ENABLE                             1
-#define     SOF_INTERRUPT_ENABLE                                0
+	__le32			pciirqenb0;	/* interrupt PCI master ... */
+#define SETUP_PACKET_INTERRUPT_ENABLE				7
+#define ENDPOINT_F_INTERRUPT_ENABLE				6
+#define ENDPOINT_E_INTERRUPT_ENABLE				5
+#define ENDPOINT_D_INTERRUPT_ENABLE				4
+#define ENDPOINT_C_INTERRUPT_ENABLE				3
+#define ENDPOINT_B_INTERRUPT_ENABLE				2
+#define ENDPOINT_A_INTERRUPT_ENABLE				1
+#define ENDPOINT_0_INTERRUPT_ENABLE				0
+	__le32			pciirqenb1;
+#define PCI_INTERRUPT_ENABLE					31
+#define POWER_STATE_CHANGE_INTERRUPT_ENABLE			27
+#define PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE			26
+#define PCI_PARITY_ERROR_INTERRUPT_ENABLE			25
+#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE		20
+#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE		19
+#define PCI_TARGET_ABORT_ASSERTED_INTERRUPT_ENABLE		18
+#define PCI_RETRY_ABORT_INTERRUPT_ENABLE			17
+#define PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE			16
+#define GPIO_INTERRUPT_ENABLE					13
+#define DMA_D_INTERRUPT_ENABLE					12
+#define DMA_C_INTERRUPT_ENABLE					11
+#define DMA_B_INTERRUPT_ENABLE					10
+#define DMA_A_INTERRUPT_ENABLE					9
+#define EEPROM_DONE_INTERRUPT_ENABLE				8
+#define VBUS_INTERRUPT_ENABLE					7
+#define CONTROL_STATUS_INTERRUPT_ENABLE				6
+#define ROOT_PORT_RESET_INTERRUPT_ENABLE			4
+#define SUSPEND_REQUEST_INTERRUPT_ENABLE			3
+#define SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE			2
+#define RESUME_INTERRUPT_ENABLE					1
+#define SOF_INTERRUPT_ENABLE					0
 	__le32                  cpu_irqenb0;	/* ... or onboard 8051 */
-#define     SETUP_PACKET_INTERRUPT_ENABLE                       7
-#define     ENDPOINT_F_INTERRUPT_ENABLE                         6
-#define     ENDPOINT_E_INTERRUPT_ENABLE                         5
-#define     ENDPOINT_D_INTERRUPT_ENABLE                         4
-#define     ENDPOINT_C_INTERRUPT_ENABLE                         3
-#define     ENDPOINT_B_INTERRUPT_ENABLE                         2
-#define     ENDPOINT_A_INTERRUPT_ENABLE                         1
-#define     ENDPOINT_0_INTERRUPT_ENABLE                         0
+#define SETUP_PACKET_INTERRUPT_ENABLE				7
+#define ENDPOINT_F_INTERRUPT_ENABLE				6
+#define ENDPOINT_E_INTERRUPT_ENABLE				5
+#define ENDPOINT_D_INTERRUPT_ENABLE				4
+#define ENDPOINT_C_INTERRUPT_ENABLE				3
+#define ENDPOINT_B_INTERRUPT_ENABLE				2
+#define ENDPOINT_A_INTERRUPT_ENABLE				1
+#define ENDPOINT_0_INTERRUPT_ENABLE				0
 	__le32                  cpu_irqenb1;
-#define     CPU_INTERRUPT_ENABLE                                31
-#define     POWER_STATE_CHANGE_INTERRUPT_ENABLE                 27
-#define     PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE                26
-#define     PCI_PARITY_ERROR_INTERRUPT_ENABLE                   25
-#define     PCI_INTA_INTERRUPT_ENABLE                           24
-#define     PCI_PME_INTERRUPT_ENABLE                            23
-#define     PCI_SERR_INTERRUPT_ENABLE                           22
-#define     PCI_PERR_INTERRUPT_ENABLE                           21
-#define     PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE          20
-#define     PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE          19
-#define     PCI_RETRY_ABORT_INTERRUPT_ENABLE                    17
-#define     PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE              16
-#define     GPIO_INTERRUPT_ENABLE                               13
-#define     DMA_D_INTERRUPT_ENABLE                              12
-#define     DMA_C_INTERRUPT_ENABLE                              11
-#define     DMA_B_INTERRUPT_ENABLE                              10
-#define     DMA_A_INTERRUPT_ENABLE                              9
-#define     EEPROM_DONE_INTERRUPT_ENABLE                        8
-#define     VBUS_INTERRUPT_ENABLE                               7
-#define     CONTROL_STATUS_INTERRUPT_ENABLE                     6
-#define     ROOT_PORT_RESET_INTERRUPT_ENABLE                    4
-#define     SUSPEND_REQUEST_INTERRUPT_ENABLE                    3
-#define     SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE             2
-#define     RESUME_INTERRUPT_ENABLE                             1
-#define     SOF_INTERRUPT_ENABLE                                0
+#define CPU_INTERRUPT_ENABLE					31
+#define POWER_STATE_CHANGE_INTERRUPT_ENABLE			27
+#define PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE			26
+#define PCI_PARITY_ERROR_INTERRUPT_ENABLE			25
+#define PCI_INTA_INTERRUPT_ENABLE				24
+#define PCI_PME_INTERRUPT_ENABLE				23
+#define PCI_SERR_INTERRUPT_ENABLE				22
+#define PCI_PERR_INTERRUPT_ENABLE				21
+#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE		20
+#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE		19
+#define PCI_RETRY_ABORT_INTERRUPT_ENABLE			17
+#define PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE			16
+#define GPIO_INTERRUPT_ENABLE					13
+#define DMA_D_INTERRUPT_ENABLE					12
+#define DMA_C_INTERRUPT_ENABLE					11
+#define DMA_B_INTERRUPT_ENABLE					10
+#define DMA_A_INTERRUPT_ENABLE					9
+#define EEPROM_DONE_INTERRUPT_ENABLE				8
+#define VBUS_INTERRUPT_ENABLE					7
+#define CONTROL_STATUS_INTERRUPT_ENABLE				6
+#define ROOT_PORT_RESET_INTERRUPT_ENABLE			4
+#define SUSPEND_REQUEST_INTERRUPT_ENABLE			3
+#define SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE			2
+#define RESUME_INTERRUPT_ENABLE					1
+#define SOF_INTERRUPT_ENABLE					0
 
-	// offset 0x0020
-	u32                     _unused1;
-	__le32                  usbirqenb1;
-#define     USB_INTERRUPT_ENABLE                                31
-#define     POWER_STATE_CHANGE_INTERRUPT_ENABLE                 27
-#define     PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE                26
-#define     PCI_PARITY_ERROR_INTERRUPT_ENABLE                   25
-#define     PCI_INTA_INTERRUPT_ENABLE                           24
-#define     PCI_PME_INTERRUPT_ENABLE                            23
-#define     PCI_SERR_INTERRUPT_ENABLE                           22
-#define     PCI_PERR_INTERRUPT_ENABLE                           21
-#define     PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE          20
-#define     PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE          19
-#define     PCI_RETRY_ABORT_INTERRUPT_ENABLE                    17
-#define     PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE              16
-#define     GPIO_INTERRUPT_ENABLE                               13
-#define     DMA_D_INTERRUPT_ENABLE                              12
-#define     DMA_C_INTERRUPT_ENABLE                              11
-#define     DMA_B_INTERRUPT_ENABLE                              10
-#define     DMA_A_INTERRUPT_ENABLE                              9
-#define     EEPROM_DONE_INTERRUPT_ENABLE                        8
-#define     VBUS_INTERRUPT_ENABLE                               7
-#define     CONTROL_STATUS_INTERRUPT_ENABLE                     6
-#define     ROOT_PORT_RESET_INTERRUPT_ENABLE                    4
-#define     SUSPEND_REQUEST_INTERRUPT_ENABLE                    3
-#define     SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE             2
-#define     RESUME_INTERRUPT_ENABLE                             1
-#define     SOF_INTERRUPT_ENABLE                                0
-	__le32                  irqstat0;
-#define     INTA_ASSERTED                                       12
-#define     SETUP_PACKET_INTERRUPT                              7
-#define     ENDPOINT_F_INTERRUPT                                6
-#define     ENDPOINT_E_INTERRUPT                                5
-#define     ENDPOINT_D_INTERRUPT                                4
-#define     ENDPOINT_C_INTERRUPT                                3
-#define     ENDPOINT_B_INTERRUPT                                2
-#define     ENDPOINT_A_INTERRUPT                                1
-#define     ENDPOINT_0_INTERRUPT                                0
-	__le32                  irqstat1;
-#define     POWER_STATE_CHANGE_INTERRUPT                        27
-#define     PCI_ARBITER_TIMEOUT_INTERRUPT                       26
-#define     PCI_PARITY_ERROR_INTERRUPT                          25
-#define     PCI_INTA_INTERRUPT                                  24
-#define     PCI_PME_INTERRUPT                                   23
-#define     PCI_SERR_INTERRUPT                                  22
-#define     PCI_PERR_INTERRUPT                                  21
-#define     PCI_MASTER_ABORT_RECEIVED_INTERRUPT                 20
-#define     PCI_TARGET_ABORT_RECEIVED_INTERRUPT                 19
-#define     PCI_RETRY_ABORT_INTERRUPT                           17
-#define     PCI_MASTER_CYCLE_DONE_INTERRUPT                     16
-#define     GPIO_INTERRUPT                                      13
-#define     DMA_D_INTERRUPT                                     12
-#define     DMA_C_INTERRUPT                                     11
-#define     DMA_B_INTERRUPT                                     10
-#define     DMA_A_INTERRUPT                                     9
-#define     EEPROM_DONE_INTERRUPT                               8
-#define     VBUS_INTERRUPT                                      7
-#define     CONTROL_STATUS_INTERRUPT                            6
-#define     ROOT_PORT_RESET_INTERRUPT                           4
-#define     SUSPEND_REQUEST_INTERRUPT                           3
-#define     SUSPEND_REQUEST_CHANGE_INTERRUPT                    2
-#define     RESUME_INTERRUPT                                    1
-#define     SOF_INTERRUPT                                       0
-	// offset 0x0030
-	__le32                  idxaddr;
-	__le32                  idxdata;
-	__le32                  fifoctl;
-#define     PCI_BASE2_RANGE                                     16
-#define     IGNORE_FIFO_AVAILABILITY                            3
-#define     PCI_BASE2_SELECT                                    2
-#define     FIFO_CONFIGURATION_SELECT                           0
-	u32                     _unused2;
-	// offset 0x0040
-	__le32                  memaddr;
-#define     START                                               28
-#define     DIRECTION                                           27
-#define     FIFO_DIAGNOSTIC_SELECT                              24
-#define     MEMORY_ADDRESS                                      0
-	__le32                  memdata0;
-	__le32                  memdata1;
-	u32                     _unused3;
-	// offset 0x0050
-	__le32                  gpioctl;
-#define     GPIO3_LED_SELECT                                    12
-#define     GPIO3_INTERRUPT_ENABLE                              11
-#define     GPIO2_INTERRUPT_ENABLE                              10
-#define     GPIO1_INTERRUPT_ENABLE                              9
-#define     GPIO0_INTERRUPT_ENABLE                              8
-#define     GPIO3_OUTPUT_ENABLE                                 7
-#define     GPIO2_OUTPUT_ENABLE                                 6
-#define     GPIO1_OUTPUT_ENABLE                                 5
-#define     GPIO0_OUTPUT_ENABLE                                 4
-#define     GPIO3_DATA                                          3
-#define     GPIO2_DATA                                          2
-#define     GPIO1_DATA                                          1
-#define     GPIO0_DATA                                          0
-	__le32                  gpiostat;
-#define     GPIO3_INTERRUPT                                     3
-#define     GPIO2_INTERRUPT                                     2
-#define     GPIO1_INTERRUPT                                     1
-#define     GPIO0_INTERRUPT                                     0
+	/* offset 0x0020 */
+	u32			_unused1;
+	__le32			usbirqenb1;
+#define USB_INTERRUPT_ENABLE					31
+#define POWER_STATE_CHANGE_INTERRUPT_ENABLE			27
+#define PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE			26
+#define PCI_PARITY_ERROR_INTERRUPT_ENABLE			25
+#define PCI_INTA_INTERRUPT_ENABLE				24
+#define PCI_PME_INTERRUPT_ENABLE				23
+#define PCI_SERR_INTERRUPT_ENABLE				22
+#define PCI_PERR_INTERRUPT_ENABLE				21
+#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE		20
+#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE		19
+#define PCI_RETRY_ABORT_INTERRUPT_ENABLE			17
+#define PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE			16
+#define GPIO_INTERRUPT_ENABLE					13
+#define DMA_D_INTERRUPT_ENABLE					12
+#define DMA_C_INTERRUPT_ENABLE					11
+#define DMA_B_INTERRUPT_ENABLE					10
+#define DMA_A_INTERRUPT_ENABLE					9
+#define EEPROM_DONE_INTERRUPT_ENABLE				8
+#define VBUS_INTERRUPT_ENABLE					7
+#define CONTROL_STATUS_INTERRUPT_ENABLE				6
+#define ROOT_PORT_RESET_INTERRUPT_ENABLE			4
+#define SUSPEND_REQUEST_INTERRUPT_ENABLE			3
+#define SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE			2
+#define RESUME_INTERRUPT_ENABLE					1
+#define SOF_INTERRUPT_ENABLE					0
+	__le32			irqstat0;
+#define INTA_ASSERTED						12
+#define SETUP_PACKET_INTERRUPT					7
+#define ENDPOINT_F_INTERRUPT					6
+#define ENDPOINT_E_INTERRUPT					5
+#define ENDPOINT_D_INTERRUPT					4
+#define ENDPOINT_C_INTERRUPT					3
+#define ENDPOINT_B_INTERRUPT					2
+#define ENDPOINT_A_INTERRUPT					1
+#define ENDPOINT_0_INTERRUPT					0
+	__le32			irqstat1;
+#define POWER_STATE_CHANGE_INTERRUPT				27
+#define PCI_ARBITER_TIMEOUT_INTERRUPT				26
+#define PCI_PARITY_ERROR_INTERRUPT				25
+#define PCI_INTA_INTERRUPT					24
+#define PCI_PME_INTERRUPT					23
+#define PCI_SERR_INTERRUPT					22
+#define PCI_PERR_INTERRUPT					21
+#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT			20
+#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT			19
+#define PCI_RETRY_ABORT_INTERRUPT				17
+#define PCI_MASTER_CYCLE_DONE_INTERRUPT				16
+#define GPIO_INTERRUPT						13
+#define DMA_D_INTERRUPT						12
+#define DMA_C_INTERRUPT						11
+#define DMA_B_INTERRUPT						10
+#define DMA_A_INTERRUPT						9
+#define EEPROM_DONE_INTERRUPT					8
+#define VBUS_INTERRUPT						7
+#define CONTROL_STATUS_INTERRUPT				6
+#define ROOT_PORT_RESET_INTERRUPT				4
+#define SUSPEND_REQUEST_INTERRUPT				3
+#define SUSPEND_REQUEST_CHANGE_INTERRUPT			2
+#define RESUME_INTERRUPT					1
+#define SOF_INTERRUPT						0
+	/* offset 0x0030 */
+	__le32			idxaddr;
+	__le32			idxdata;
+	__le32			fifoctl;
+#define PCI_BASE2_RANGE						16
+#define IGNORE_FIFO_AVAILABILITY				3
+#define PCI_BASE2_SELECT					2
+#define FIFO_CONFIGURATION_SELECT				0
+	u32			_unused2;
+	/* offset 0x0040 */
+	__le32			memaddr;
+#define START							28
+#define DIRECTION						27
+#define FIFO_DIAGNOSTIC_SELECT					24
+#define MEMORY_ADDRESS						0
+	__le32			memdata0;
+	__le32			memdata1;
+	u32			_unused3;
+	/* offset 0x0050 */
+	__le32			gpioctl;
+#define GPIO3_LED_SELECT					12
+#define GPIO3_INTERRUPT_ENABLE					11
+#define GPIO2_INTERRUPT_ENABLE					10
+#define GPIO1_INTERRUPT_ENABLE					9
+#define GPIO0_INTERRUPT_ENABLE					8
+#define GPIO3_OUTPUT_ENABLE					7
+#define GPIO2_OUTPUT_ENABLE					6
+#define GPIO1_OUTPUT_ENABLE					5
+#define GPIO0_OUTPUT_ENABLE					4
+#define GPIO3_DATA						3
+#define GPIO2_DATA						2
+#define GPIO1_DATA						1
+#define GPIO0_DATA						0
+	__le32			gpiostat;
+#define GPIO3_INTERRUPT						3
+#define GPIO2_INTERRUPT						2
+#define GPIO1_INTERRUPT						1
+#define GPIO0_INTERRUPT						0
 } __attribute__ ((packed));
 
 /* usb control, BAR0 + 0x0080 */
 struct net2280_usb_regs {
-	// offset 0x0080
-	__le32                  stdrsp;
-#define     STALL_UNSUPPORTED_REQUESTS                          31
-#define     SET_TEST_MODE                                       16
-#define     GET_OTHER_SPEED_CONFIGURATION                       15
-#define     GET_DEVICE_QUALIFIER                                14
-#define     SET_ADDRESS                                         13
-#define     ENDPOINT_SET_CLEAR_HALT                             12
-#define     DEVICE_SET_CLEAR_DEVICE_REMOTE_WAKEUP               11
-#define     GET_STRING_DESCRIPTOR_2                             10
-#define     GET_STRING_DESCRIPTOR_1                             9
-#define     GET_STRING_DESCRIPTOR_0                             8
-#define     GET_SET_INTERFACE                                   6
-#define     GET_SET_CONFIGURATION                               5
-#define     GET_CONFIGURATION_DESCRIPTOR                        4
-#define     GET_DEVICE_DESCRIPTOR                               3
-#define     GET_ENDPOINT_STATUS                                 2
-#define     GET_INTERFACE_STATUS                                1
-#define     GET_DEVICE_STATUS                                   0
-	__le32                  prodvendid;
-#define     PRODUCT_ID                                          16
-#define     VENDOR_ID                                           0
-	__le32                  relnum;
-	__le32                  usbctl;
-#define     SERIAL_NUMBER_INDEX                                 16
-#define     PRODUCT_ID_STRING_ENABLE                            13
-#define     VENDOR_ID_STRING_ENABLE                             12
-#define     USB_ROOT_PORT_WAKEUP_ENABLE                         11
-#define     VBUS_PIN                                            10
-#define     TIMED_DISCONNECT                                    9
-#define     SUSPEND_IMMEDIATELY                                 7
-#define     SELF_POWERED_USB_DEVICE                             6
-#define     REMOTE_WAKEUP_SUPPORT                               5
-#define     PME_POLARITY                                        4
-#define     USB_DETECT_ENABLE                                   3
-#define     PME_WAKEUP_ENABLE                                   2
-#define     DEVICE_REMOTE_WAKEUP_ENABLE                         1
-#define     SELF_POWERED_STATUS                                 0
-	// offset 0x0090
-	__le32                  usbstat;
-#define     HIGH_SPEED                                          7
-#define     FULL_SPEED                                          6
-#define     GENERATE_RESUME                                     5
-#define     GENERATE_DEVICE_REMOTE_WAKEUP                       4
-	__le32                  xcvrdiag;
-#define     FORCE_HIGH_SPEED_MODE                               31
-#define     FORCE_FULL_SPEED_MODE                               30
-#define     USB_TEST_MODE                                       24
-#define     LINE_STATE                                          16
-#define     TRANSCEIVER_OPERATION_MODE                          2
-#define     TRANSCEIVER_SELECT                                  1
-#define     TERMINATION_SELECT                                  0
-	__le32                  setup0123;
-	__le32                  setup4567;
-	// offset 0x0090
-	u32                     _unused0;
-	__le32                  ouraddr;
-#define     FORCE_IMMEDIATE                                     7
-#define     OUR_USB_ADDRESS                                     0
-	__le32                  ourconfig;
+	/* offset 0x0080 */
+	__le32			stdrsp;
+#define STALL_UNSUPPORTED_REQUESTS				31
+#define SET_TEST_MODE						16
+#define GET_OTHER_SPEED_CONFIGURATION				15
+#define GET_DEVICE_QUALIFIER					14
+#define SET_ADDRESS						13
+#define ENDPOINT_SET_CLEAR_HALT					12
+#define DEVICE_SET_CLEAR_DEVICE_REMOTE_WAKEUP			11
+#define GET_STRING_DESCRIPTOR_2					10
+#define GET_STRING_DESCRIPTOR_1					9
+#define GET_STRING_DESCRIPTOR_0					8
+#define GET_SET_INTERFACE					6
+#define GET_SET_CONFIGURATION					5
+#define GET_CONFIGURATION_DESCRIPTOR				4
+#define GET_DEVICE_DESCRIPTOR					3
+#define GET_ENDPOINT_STATUS					2
+#define GET_INTERFACE_STATUS					1
+#define GET_DEVICE_STATUS					0
+	__le32			prodvendid;
+#define     PRODUCT_ID						16
+#define     VENDOR_ID						0
+	__le32			relnum;
+	__le32			usbctl;
+#define SERIAL_NUMBER_INDEX					16
+#define PRODUCT_ID_STRING_ENABLE				13
+#define VENDOR_ID_STRING_ENABLE					12
+#define USB_ROOT_PORT_WAKEUP_ENABLE				11
+#define VBUS_PIN						10
+#define TIMED_DISCONNECT					9
+#define SUSPEND_IMMEDIATELY					7
+#define SELF_POWERED_USB_DEVICE					6
+#define REMOTE_WAKEUP_SUPPORT					5
+#define PME_POLARITY						4
+#define USB_DETECT_ENABLE					3
+#define PME_WAKEUP_ENABLE					2
+#define DEVICE_REMOTE_WAKEUP_ENABLE				1
+#define SELF_POWERED_STATUS					0
+	/* offset 0x0090 */
+	__le32			usbstat;
+#define HIGH_SPEED						7
+#define FULL_SPEED						6
+#define GENERATE_RESUME						5
+#define GENERATE_DEVICE_REMOTE_WAKEUP				4
+	__le32			xcvrdiag;
+#define FORCE_HIGH_SPEED_MODE					31
+#define FORCE_FULL_SPEED_MODE					30
+#define USB_TEST_MODE						24
+#define LINE_STATE						16
+#define TRANSCEIVER_OPERATION_MODE				2
+#define TRANSCEIVER_SELECT					1
+#define TERMINATION_SELECT					0
+	__le32			setup0123;
+	__le32			setup4567;
+	/* offset 0x0090 */
+	u32			_unused0;
+	__le32			ouraddr;
+#define FORCE_IMMEDIATE						7
+#define OUR_USB_ADDRESS						0
+	__le32			ourconfig;
 } __attribute__ ((packed));
 
 /* pci control, BAR0 + 0x0100 */
 struct net2280_pci_regs {
-	// offset 0x0100
-	__le32                  pcimstctl;
-#define     PCI_ARBITER_PARK_SELECT                             13
-#define     PCI_MULTI LEVEL_ARBITER                             12
-#define     PCI_RETRY_ABORT_ENABLE                              11
-#define     DMA_MEMORY_WRITE_AND_INVALIDATE_ENABLE              10
-#define     DMA_READ_MULTIPLE_ENABLE                            9
-#define     DMA_READ_LINE_ENABLE                                8
-#define     PCI_MASTER_COMMAND_SELECT                           6
-#define         MEM_READ_OR_WRITE                                   0
-#define         IO_READ_OR_WRITE                                    1
-#define         CFG_READ_OR_WRITE                                   2
-#define     PCI_MASTER_START                                    5
-#define     PCI_MASTER_READ_WRITE                               4
-#define         PCI_MASTER_WRITE                                    0
-#define         PCI_MASTER_READ                                     1
-#define     PCI_MASTER_BYTE_WRITE_ENABLES                       0
-	__le32                  pcimstaddr;
-	__le32                  pcimstdata;
-	__le32                  pcimststat;
-#define     PCI_ARBITER_CLEAR                                   2
-#define     PCI_EXTERNAL_ARBITER                                1
-#define     PCI_HOST_MODE                                       0
+	/* offset 0x0100 */
+	__le32			pcimstctl;
+#define PCI_ARBITER_PARK_SELECT					13
+#define PCI_MULTI LEVEL_ARBITER					12
+#define PCI_RETRY_ABORT_ENABLE					11
+#define DMA_MEMORY_WRITE_AND_INVALIDATE_ENABLE			10
+#define DMA_READ_MULTIPLE_ENABLE				9
+#define DMA_READ_LINE_ENABLE					8
+#define PCI_MASTER_COMMAND_SELECT				6
+#define		MEM_READ_OR_WRITE				0
+#define		IO_READ_OR_WRITE				1
+#define		CFG_READ_OR_WRITE				2
+#define PCI_MASTER_START					5
+#define PCI_MASTER_READ_WRITE					4
+#define		PCI_MASTER_WRITE				0
+#define		PCI_MASTER_READ					1
+#define PCI_MASTER_BYTE_WRITE_ENABLES				0
+	__le32			pcimstaddr;
+	__le32			pcimstdata;
+	__le32			pcimststat;
+#define PCI_ARBITER_CLEAR					2
+#define PCI_EXTERNAL_ARBITER					1
+#define PCI_HOST_MODE						0
 } __attribute__ ((packed));
 
 /* dma control, BAR0 + 0x0180 ... array of four structs like this,
@@ -330,50 +330,50 @@ struct net2280_pci_regs {
  * that can be loaded into some of these registers.
  */
 struct net2280_dma_regs {	/* [11.7] */
-	// offset 0x0180, 0x01a0, 0x01c0, 0x01e0,
-	__le32                  dmactl;
-#define     DMA_SCATTER_GATHER_DONE_INTERRUPT_ENABLE            25
-#define     DMA_CLEAR_COUNT_ENABLE                              21
-#define     DESCRIPTOR_POLLING_RATE                             19
-#define         POLL_CONTINUOUS                                     0
-#define         POLL_1_USEC                                         1
-#define         POLL_100_USEC                                       2
-#define         POLL_1_MSEC                                         3
-#define     DMA_VALID_BIT_POLLING_ENABLE                        18
-#define     DMA_VALID_BIT_ENABLE                                17
-#define     DMA_SCATTER_GATHER_ENABLE                           16
-#define     DMA_OUT_AUTO_START_ENABLE                           4
-#define     DMA_PREEMPT_ENABLE                                  3
-#define     DMA_FIFO_VALIDATE                                   2
-#define     DMA_ENABLE                                          1
-#define     DMA_ADDRESS_HOLD                                    0
-	__le32                  dmastat;
-#define     DMA_SCATTER_GATHER_DONE_INTERRUPT                   25
-#define     DMA_TRANSACTION_DONE_INTERRUPT                      24
-#define     DMA_ABORT                                           1
-#define     DMA_START                                           0
-	u32                     _unused0[2];
-	// offset 0x0190, 0x01b0, 0x01d0, 0x01f0,
+	/* offset 0x0180, 0x01a0, 0x01c0, 0x01e0, */
+	__le32			dmactl;
+#define DMA_SCATTER_GATHER_DONE_INTERRUPT_ENABLE		25
+#define DMA_CLEAR_COUNT_ENABLE					21
+#define DESCRIPTOR_POLLING_RATE					19
+#define		POLL_CONTINUOUS					0
+#define		POLL_1_USEC					1
+#define		POLL_100_USEC					2
+#define		POLL_1_MSEC					3
+#define DMA_VALID_BIT_POLLING_ENABLE				18
+#define DMA_VALID_BIT_ENABLE					17
+#define DMA_SCATTER_GATHER_ENABLE				16
+#define DMA_OUT_AUTO_START_ENABLE				4
+#define DMA_PREEMPT_ENABLE					3
+#define DMA_FIFO_VALIDATE					2
+#define DMA_ENABLE						1
+#define DMA_ADDRESS_HOLD					0
+	__le32			dmastat;
+#define DMA_SCATTER_GATHER_DONE_INTERRUPT			25
+#define DMA_TRANSACTION_DONE_INTERRUPT				24
+#define DMA_ABORT						1
+#define DMA_START						0
+	u32			_unused0[2];
+	/* offset 0x0190, 0x01b0, 0x01d0, 0x01f0, */
 	__le32                  dmacount;
-#define     VALID_BIT                                           31
-#define     DMA_DIRECTION                                       30
-#define     DMA_DONE_INTERRUPT_ENABLE                           29
-#define     END_OF_CHAIN                                        28
-#define         DMA_BYTE_COUNT_MASK                                 ((1<<24)-1)
-#define     DMA_BYTE_COUNT                                      0
-	__le32                  dmaaddr;
-	__le32                  dmadesc;
-	u32                     _unused1;
+#define VALID_BIT						31
+#define DMA_DIRECTION						30
+#define DMA_DONE_INTERRUPT_ENABLE				29
+#define END_OF_CHAIN						28
+#define DMA_BYTE_COUNT_MASK					((1<<24)-1)
+#define DMA_BYTE_COUNT						0
+	__le32			dmaaddr;
+	__le32			dmadesc;
+	u32			_unused1;
 } __attribute__ ((packed));
 
 /* dedicated endpoint registers, BAR0 + 0x0200 */
 
 struct net2280_dep_regs {	/* [11.8] */
-	// offset 0x0200, 0x0210, 0x220, 0x230, 0x240
-	__le32                  dep_cfg;
-	// offset 0x0204, 0x0214, 0x224, 0x234, 0x244
-	__le32                  dep_rsp;
-	u32                     _unused[2];
+	/* offset 0x0200, 0x0210, 0x220, 0x230, 0x240 */
+	__le32			dep_cfg;
+	/* offset 0x0204, 0x0214, 0x224, 0x234, 0x244 */
+	__le32			dep_rsp;
+	u32			_unused[2];
 } __attribute__ ((packed));
 
 /* configurable endpoint registers, BAR0 + 0x0300 ... array of seven structs
@@ -381,62 +381,62 @@ struct net2280_dep_regs {	/* [11.8] */
  * ep0 reserved for control; E and F have only 64 bytes of fifo
  */
 struct net2280_ep_regs {	/* [11.9] */
-	// offset 0x0300, 0x0320, 0x0340, 0x0360, 0x0380, 0x03a0, 0x03c0
-	__le32                  ep_cfg;
-#define     ENDPOINT_BYTE_COUNT                                 16
-#define     ENDPOINT_ENABLE                                     10
-#define     ENDPOINT_TYPE                                       8
-#define     ENDPOINT_DIRECTION                                  7
-#define     ENDPOINT_NUMBER                                     0
-	__le32                  ep_rsp;
-#define     SET_NAK_OUT_PACKETS                                 15
-#define     SET_EP_HIDE_STATUS_PHASE                            14
-#define     SET_EP_FORCE_CRC_ERROR                              13
-#define     SET_INTERRUPT_MODE                                  12
-#define     SET_CONTROL_STATUS_PHASE_HANDSHAKE                  11
-#define     SET_NAK_OUT_PACKETS_MODE                            10
-#define     SET_ENDPOINT_TOGGLE                                 9
-#define     SET_ENDPOINT_HALT                                   8
-#define     CLEAR_NAK_OUT_PACKETS                               7
-#define     CLEAR_EP_HIDE_STATUS_PHASE                          6
-#define     CLEAR_EP_FORCE_CRC_ERROR                            5
-#define     CLEAR_INTERRUPT_MODE                                4
-#define     CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE                3
-#define     CLEAR_NAK_OUT_PACKETS_MODE                          2
-#define     CLEAR_ENDPOINT_TOGGLE                               1
-#define     CLEAR_ENDPOINT_HALT                                 0
-	__le32                  ep_irqenb;
-#define     SHORT_PACKET_OUT_DONE_INTERRUPT_ENABLE              6
-#define     SHORT_PACKET_TRANSFERRED_INTERRUPT_ENABLE           5
-#define     DATA_PACKET_RECEIVED_INTERRUPT_ENABLE               3
-#define     DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE            2
-#define     DATA_OUT_PING_TOKEN_INTERRUPT_ENABLE                1
-#define     DATA_IN_TOKEN_INTERRUPT_ENABLE                      0
-	__le32                  ep_stat;
-#define     FIFO_VALID_COUNT                                    24
-#define     HIGH_BANDWIDTH_OUT_TRANSACTION_PID                  22
-#define     TIMEOUT                                             21
-#define     USB_STALL_SENT                                      20
-#define     USB_IN_NAK_SENT                                     19
-#define     USB_IN_ACK_RCVD                                     18
-#define     USB_OUT_PING_NAK_SENT                               17
-#define     USB_OUT_ACK_SENT                                    16
-#define     FIFO_OVERFLOW                                       13
-#define     FIFO_UNDERFLOW                                      12
-#define     FIFO_FULL                                           11
-#define     FIFO_EMPTY                                          10
-#define     FIFO_FLUSH                                          9
-#define     SHORT_PACKET_OUT_DONE_INTERRUPT                     6
-#define     SHORT_PACKET_TRANSFERRED_INTERRUPT                  5
-#define     NAK_OUT_PACKETS                                     4
-#define     DATA_PACKET_RECEIVED_INTERRUPT                      3
-#define     DATA_PACKET_TRANSMITTED_INTERRUPT                   2
-#define     DATA_OUT_PING_TOKEN_INTERRUPT                       1
-#define     DATA_IN_TOKEN_INTERRUPT                             0
-	// offset 0x0310, 0x0330, 0x0350, 0x0370, 0x0390, 0x03b0, 0x03d0
-	__le32                  ep_avail;
-	__le32                  ep_data;
-	u32                     _unused0[2];
+	/* offset 0x0300, 0x0320, 0x0340, 0x0360, 0x0380, 0x03a0, 0x03c0 */
+	__le32			ep_cfg;
+#define ENDPOINT_BYTE_COUNT					16
+#define ENDPOINT_ENABLE						10
+#define ENDPOINT_TYPE						8
+#define ENDPOINT_DIRECTION					7
+#define ENDPOINT_NUMBER						0
+	__le32			ep_rsp;
+#define SET_NAK_OUT_PACKETS					15
+#define SET_EP_HIDE_STATUS_PHASE				14
+#define SET_EP_FORCE_CRC_ERROR					13
+#define SET_INTERRUPT_MODE					12
+#define SET_CONTROL_STATUS_PHASE_HANDSHAKE			11
+#define SET_NAK_OUT_PACKETS_MODE				10
+#define SET_ENDPOINT_TOGGLE					9
+#define SET_ENDPOINT_HALT					8
+#define CLEAR_NAK_OUT_PACKETS					7
+#define CLEAR_EP_HIDE_STATUS_PHASE				6
+#define CLEAR_EP_FORCE_CRC_ERROR				5
+#define CLEAR_INTERRUPT_MODE					4
+#define CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE			3
+#define CLEAR_NAK_OUT_PACKETS_MODE				2
+#define CLEAR_ENDPOINT_TOGGLE					1
+#define CLEAR_ENDPOINT_HALT					0
+	__le32			ep_irqenb;
+#define SHORT_PACKET_OUT_DONE_INTERRUPT_ENABLE			6
+#define SHORT_PACKET_TRANSFERRED_INTERRUPT_ENABLE		5
+#define DATA_PACKET_RECEIVED_INTERRUPT_ENABLE			3
+#define DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE		2
+#define DATA_OUT_PING_TOKEN_INTERRUPT_ENABLE			1
+#define DATA_IN_TOKEN_INTERRUPT_ENABLE				0
+	__le32			ep_stat;
+#define FIFO_VALID_COUNT					24
+#define HIGH_BANDWIDTH_OUT_TRANSACTION_PID			22
+#define TIMEOUT							21
+#define USB_STALL_SENT						20
+#define USB_IN_NAK_SENT						19
+#define USB_IN_ACK_RCVD						18
+#define USB_OUT_PING_NAK_SENT					17
+#define USB_OUT_ACK_SENT					16
+#define FIFO_OVERFLOW						13
+#define FIFO_UNDERFLOW						12
+#define FIFO_FULL						11
+#define FIFO_EMPTY						10
+#define FIFO_FLUSH						9
+#define SHORT_PACKET_OUT_DONE_INTERRUPT				6
+#define SHORT_PACKET_TRANSFERRED_INTERRUPT			5
+#define NAK_OUT_PACKETS						4
+#define DATA_PACKET_RECEIVED_INTERRUPT				3
+#define DATA_PACKET_TRANSMITTED_INTERRUPT			2
+#define DATA_OUT_PING_TOKEN_INTERRUPT				1
+#define DATA_IN_TOKEN_INTERRUPT					0
+	/* offset 0x0310, 0x0330, 0x0350, 0x0370, 0x0390, 0x03b0, 0x03d0 */
+	__le32			ep_avail;
+	__le32			ep_data;
+	u32			_unused0[2];
 } __attribute__ ((packed));
 
 struct net2280_reg_write {