stmmac: move hw init in the probe (v2)

This patch moves the MAC HW initialization and
the HW feature verification from the open to the probe
function as D. Miller suggested.
So the patch actually reorganizes and tidies-up some parts of
the driver and indeed fixes some problem when tune its HW features.
These can be overwritten by looking at the HW cap register at
run-time and that generated problems.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Reviewed-by: Francesco Virlinzi <francesco.virlinzi@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/stmicro/stmmac/stmmac.h

@@ -97,4 +97,5 @@ int stmmac_resume(struct net_device *ndev);
 int stmmac_suspend(struct net_device *ndev);
 int stmmac_dvr_remove(struct net_device *ndev);
 struct stmmac_priv *stmmac_dvr_probe(struct device *device,
-				struct plat_stmmacenet_data *plat_dat);
+				     struct plat_stmmacenet_data *plat_dat,
+				     void __iomem *addr);

drivers/net/ethernet/stmicro/stmmac/stmmac_main.c

@@ -241,7 +241,7 @@ static void stmmac_adjust_link(struct net_device *dev)
 			case 1000:
 				if (likely(priv->plat->has_gmac))
 					ctrl &= ~priv->hw->link.port;
-				stmmac_hw_fix_mac_speed(priv);
+					stmmac_hw_fix_mac_speed(priv);
 				break;
 			case 100:
 			case 10:
@@ -785,7 +785,7 @@ static u32 stmmac_get_synopsys_id(struct stmmac_priv *priv)
 		u32 uid = ((hwid & 0x0000ff00) >> 8);
 		u32 synid = (hwid & 0x000000ff);
 
-		pr_info("STMMAC - user ID: 0x%x, Synopsys ID: 0x%x\n",
+		pr_info("stmmac - user ID: 0x%x, Synopsys ID: 0x%x\n",
 			uid, synid);
 
 		return synid;
@@ -869,38 +869,6 @@ static int stmmac_get_hw_features(struct stmmac_priv *priv)
 	return hw_cap;
 }
 
-/**
- * stmmac_mac_device_setup
- * @dev : device pointer
- * Description: this is to attach the GMAC or MAC 10/100
- * main core structures that will be completed during the
- * open step.
- */
-static int stmmac_mac_device_setup(struct net_device *dev)
-{
-	struct stmmac_priv *priv = netdev_priv(dev);
-
-	struct mac_device_info *device;
-
-	if (priv->plat->has_gmac)
-		device = dwmac1000_setup(priv->ioaddr);
-	else
-		device = dwmac100_setup(priv->ioaddr);
-
-	if (!device)
-		return -ENOMEM;
-
-	priv->hw = device;
-	priv->hw->ring = &ring_mode_ops;
-
-	if (device_can_wakeup(priv->device)) {
-		priv->wolopts = WAKE_MAGIC; /* Magic Frame as default */
-		enable_irq_wake(priv->wol_irq);
-	}
-
-	return 0;
-}
-
 static void stmmac_check_ether_addr(struct stmmac_priv *priv)
 {
 	/* verify if the MAC address is valid, in case of failures it
@@ -930,20 +898,8 @@ static int stmmac_open(struct net_device *dev)
 	struct stmmac_priv *priv = netdev_priv(dev);
 	int ret;
 
-	/* MAC HW device setup */
-	ret = stmmac_mac_device_setup(dev);
-	if (ret < 0)
-		return ret;
-
 	stmmac_check_ether_addr(priv);
 
-	stmmac_verify_args();
-
-	/* Override with kernel parameters if supplied XXX CRS XXX
-	 * this needs to have multiple instances */
-	if ((phyaddr >= 0) && (phyaddr <= 31))
-		priv->plat->phy_addr = phyaddr;
-
 	/* MDIO bus Registration */
 	ret = stmmac_mdio_register(dev);
 	if (ret < 0) {
@@ -976,44 +932,6 @@ static int stmmac_open(struct net_device *dev)
 		goto open_error;
 	}
 
-	stmmac_get_synopsys_id(priv);
-
-	priv->hw_cap_support = stmmac_get_hw_features(priv);
-
-	if (priv->hw_cap_support) {
-		pr_info(" Support DMA HW capability register");
-
-		/* We can override some gmac/dma configuration fields: e.g.
-		 * enh_desc, tx_coe (e.g. that are passed through the
-		 * platform) with the values from the HW capability
-		 * register (if supported).
-		 */
-		priv->plat->enh_desc = priv->dma_cap.enh_desc;
-		priv->plat->tx_coe = priv->dma_cap.tx_coe;
-		priv->plat->pmt = priv->dma_cap.pmt_remote_wake_up;
-
-		/* By default disable wol on magic frame if not supported */
-		if (!priv->dma_cap.pmt_magic_frame)
-			priv->wolopts &= ~WAKE_MAGIC;
-
-	} else
-		pr_info(" No HW DMA feature register supported");
-
-	/* Select the enhnaced/normal descriptor structures */
-	stmmac_selec_desc_mode(priv);
-
-	/* PMT module is not integrated in all the MAC devices. */
-	if (priv->plat->pmt) {
-		pr_info(" Remote wake-up capable\n");
-		device_set_wakeup_capable(priv->device, 1);
-	}
-
-	priv->rx_coe = priv->hw->mac->rx_coe(priv->ioaddr);
-	if (priv->rx_coe)
-		pr_info(" Checksum Offload Engine supported\n");
-	if (priv->plat->tx_coe)
-		pr_info(" Checksum insertion supported\n");
-
 	/* Create and initialize the TX/RX descriptors chains. */
 	priv->dma_tx_size = STMMAC_ALIGN(dma_txsize);
 	priv->dma_rx_size = STMMAC_ALIGN(dma_rxsize);
@@ -1030,14 +948,14 @@ static int stmmac_open(struct net_device *dev)
 
 	/* Copy the MAC addr into the HW  */
 	priv->hw->mac->set_umac_addr(priv->ioaddr, dev->dev_addr, 0);
+
 	/* If required, perform hw setup of the bus. */
 	if (priv->plat->bus_setup)
 		priv->plat->bus_setup(priv->ioaddr);
+
 	/* Initialize the MAC Core */
 	priv->hw->mac->core_init(priv->ioaddr);
 
-	netdev_update_features(dev);
-
 	/* Request the IRQ lines */
 	ret = request_irq(dev->irq, stmmac_interrupt,
 			 IRQF_SHARED, dev->name, dev);
@@ -1073,7 +991,7 @@ static int stmmac_open(struct net_device *dev)
 #ifdef CONFIG_STMMAC_DEBUG_FS
 	ret = stmmac_init_fs(dev);
 	if (ret < 0)
-		pr_warning("\tFailed debugFS registration");
+		pr_warning("%s: failed debugFS registration\n", __func__);
 #endif
 	/* Start the ball rolling... */
 	DBG(probe, DEBUG, "%s: DMA RX/TX processes started...\n", dev->name);
@@ -1083,6 +1001,7 @@ static int stmmac_open(struct net_device *dev)
 #ifdef CONFIG_STMMAC_TIMER
 	priv->tm->timer_start(tmrate);
 #endif
+
 	/* Dump DMA/MAC registers */
 	if (netif_msg_hw(priv)) {
 		priv->hw->mac->dump_regs(priv->ioaddr);
@@ -1804,6 +1723,69 @@ static const struct net_device_ops stmmac_netdev_ops = {
 	.ndo_set_mac_address = eth_mac_addr,
 };
 
+/**
+ *  stmmac_hw_init - Init the MAC device
+ *  @priv : pointer to the private device structure.
+ *  Description: this function detects which MAC device
+ *  (GMAC/MAC10-100) has to attached, checks the HW capability
+ *  (if supported) and sets the driver's features (for example
+ *  to use the ring or chaine mode or support the normal/enh
+ *  descriptor structure).
+ */
+static int stmmac_hw_init(struct stmmac_priv *priv)
+{
+	int ret = 0;
+	struct mac_device_info *mac;
+
+	/* Identify the MAC HW device */
+	if (priv->plat->has_gmac)
+		mac = dwmac1000_setup(priv->ioaddr);
+	else
+		mac = dwmac100_setup(priv->ioaddr);
+	if (!mac)
+		return -ENOMEM;
+
+	priv->hw = mac;
+
+	/* To use the chained or ring mode */
+	priv->hw->ring = &ring_mode_ops;
+
+	/* Get and dump the chip ID */
+	stmmac_get_synopsys_id(priv);
+
+	/* Get the HW capability (new GMAC newer than 3.50a) */
+	priv->hw_cap_support = stmmac_get_hw_features(priv);
+	if (priv->hw_cap_support) {
+		pr_info(" DMA HW capability register supported");
+
+		/* We can override some gmac/dma configuration fields: e.g.
+		 * enh_desc, tx_coe (e.g. that are passed through the
+		 * platform) with the values from the HW capability
+		 * register (if supported).
+		 */
+		priv->plat->enh_desc = priv->dma_cap.enh_desc;
+		priv->plat->tx_coe = priv->dma_cap.tx_coe;
+		priv->plat->pmt = priv->dma_cap.pmt_remote_wake_up;
+	} else
+		pr_info(" No HW DMA feature register supported");
+
+	/* Select the enhnaced/normal descriptor structures */
+	stmmac_selec_desc_mode(priv);
+
+	priv->rx_coe = priv->hw->mac->rx_coe(priv->ioaddr);
+	if (priv->rx_coe)
+		pr_info(" RX Checksum Offload Engine supported\n");
+	if (priv->plat->tx_coe)
+		pr_info(" TX Checksum insertion supported\n");
+
+	if (priv->plat->pmt) {
+		pr_info(" Wake-Up On Lan supported\n");
+		device_set_wakeup_capable(priv->device, 1);
+	}
+
+	return ret;
+}
+
 /**
  * stmmac_dvr_probe
  * @device: device pointer
@@ -1811,7 +1793,8 @@ static const struct net_device_ops stmmac_netdev_ops = {
  * call the alloc_etherdev, allocate the priv structure.
  */
 struct stmmac_priv *stmmac_dvr_probe(struct device *device,
-					struct plat_stmmacenet_data *plat_dat)
+				     struct plat_stmmacenet_data *plat_dat,
+				     void __iomem *addr)
 {
 	int ret = 0;
 	struct net_device *ndev = NULL;
@@ -1831,10 +1814,27 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device,
 
 	ether_setup(ndev);
 
-	ndev->netdev_ops = &stmmac_netdev_ops;
 	stmmac_set_ethtool_ops(ndev);
+	priv->pause = pause;
+	priv->plat = plat_dat;
+	priv->ioaddr = addr;
+	priv->dev->base_addr = (unsigned long)addr;
+
+	/* Verify driver arguments */
+	stmmac_verify_args();
 
-	ndev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
+	/* Override with kernel parameters if supplied XXX CRS XXX
+	 * this needs to have multiple instances */
+	if ((phyaddr >= 0) && (phyaddr <= 31))
+		priv->plat->phy_addr = phyaddr;
+
+	/* Init MAC and get the capabilities */
+	stmmac_hw_init(priv);
+
+	ndev->netdev_ops = &stmmac_netdev_ops;
+
+	ndev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+			    NETIF_F_RXCSUM;
 	ndev->features |= ndev->hw_features | NETIF_F_HIGHDMA;
 	ndev->watchdog_timeo = msecs_to_jiffies(watchdog);
 #ifdef STMMAC_VLAN_TAG_USED
@@ -1846,8 +1846,6 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device,
 	if (flow_ctrl)
 		priv->flow_ctrl = FLOW_AUTO;	/* RX/TX pause on */
 
-	priv->pause = pause;
-	priv->plat = plat_dat;
 	netif_napi_add(ndev, &priv->napi, stmmac_poll, 64);
 
 	spin_lock_init(&priv->lock);
@@ -1855,15 +1853,10 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device,
 
 	ret = register_netdev(ndev);
 	if (ret) {
-		pr_err("%s: ERROR %i registering the device\n",
-		       __func__, ret);
+		pr_err("%s: ERROR %i registering the device\n", __func__, ret);
 		goto error;
 	}
 
-	DBG(probe, DEBUG, "%s: Scatter/Gather: %s - HW checksums: %s\n",
-	    ndev->name, (ndev->features & NETIF_F_SG) ? "on" : "off",
-	    (ndev->features & NETIF_F_IP_CSUM) ? "on" : "off");
-
 	return priv;
 
 error:

drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c

@@ -96,13 +96,11 @@ static int __devinit stmmac_pci_probe(struct pci_dev *pdev,
 
 	stmmac_default_data();
 
-	priv = stmmac_dvr_probe(&(pdev->dev), &plat_dat);
+	priv = stmmac_dvr_probe(&(pdev->dev), &plat_dat, addr);
 	if (!priv) {
-		pr_err("%s: main drivr probe failed", __func__);
+		pr_err("%s: main driver probe failed", __func__);
 		goto err_out;
 	}
-	priv->ioaddr = addr;
-	priv->dev->base_addr = (unsigned long)addr;
 	priv->dev->irq = pdev->irq;
 	priv->wol_irq = pdev->irq;
 

drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c

@@ -59,16 +59,20 @@ static int stmmac_pltfr_probe(struct platform_device *pdev)
 		goto out_release_region;
 	}
 	plat_dat = pdev->dev.platform_data;
-	priv = stmmac_dvr_probe(&(pdev->dev), plat_dat);
+
+	/* Custom initialisation (if needed)*/
+	if (plat_dat->init) {
+		ret = plat_dat->init(pdev);
+		if (unlikely(ret))
+			goto out_unmap;
+	}
+
+	priv = stmmac_dvr_probe(&(pdev->dev), plat_dat, addr);
 	if (!priv) {
-		pr_err("%s: main drivr probe failed", __func__);
+		pr_err("%s: main driver probe failed", __func__);
 		goto out_unmap;
 	}
 
-	priv->ioaddr = addr;
-	/* Set the I/O base addr */
-	priv->dev->base_addr = (unsigned long)addr;
-
 	/* Get the MAC information */
 	priv->dev->irq = platform_get_irq_byname(pdev, "macirq");
 	if (priv->dev->irq == -ENXIO) {
@@ -92,13 +96,6 @@ static int stmmac_pltfr_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, priv->dev);
 
-	/* Custom initialisation */
-	if (priv->plat->init) {
-		ret = priv->plat->init(pdev);
-		if (unlikely(ret))
-			goto out_unmap;
-	}
-
 	pr_debug("STMMAC platform driver registration completed");
 
 	return 0;