Merge 3.0-rc7 into drm-core-next

This pulls in all the drm fixes up to this point which are needed
for some -next patches to work.

CREDITS

@@ -518,7 +518,7 @@ N: Zach Brown
 E: zab@zabbo.net
 D: maestro pci sound
 
-M: David Brownell
+N: David Brownell
 D: Kernel engineer, mentor, and friend.  Maintained USB EHCI and
 D: gadget layers, SPI subsystem, GPIO subsystem, and more than a few
 D: device drivers.  His encouragement also helped many engineers get

Documentation/Changes

@@ -2,13 +2,7 @@ Intro
 =====
 
 This document is designed to provide a list of the minimum levels of
-software necessary to run the 2.6 kernels, as well as provide brief
-instructions regarding any other "Gotchas" users may encounter when
-trying life on the Bleeding Edge.  If upgrading from a pre-2.4.x
-kernel, please consult the Changes file included with 2.4.x kernels for
-additional information; most of that information will not be repeated
-here.  Basically, this document assumes that your system is already
-functional and running at least 2.4.x kernels.
+software necessary to run the 3.0 kernels.
 
 This document is originally based on my "Changes" file for 2.0.x kernels
 and therefore owes credit to the same people as that file (Jared Mauch,
@@ -22,11 +16,10 @@ Upgrade to at *least* these software revisions before thinking you've
 encountered a bug!  If you're unsure what version you're currently
 running, the suggested command should tell you.
 
-Again, keep in mind that this list assumes you are already
-functionally running a Linux 2.4 kernel.  Also, not all tools are
-necessary on all systems; obviously, if you don't have any ISDN
-hardware, for example, you probably needn't concern yourself with
-isdn4k-utils.
+Again, keep in mind that this list assumes you are already functionally
+running a Linux kernel.  Also, not all tools are necessary on all
+systems; obviously, if you don't have any ISDN hardware, for example,
+you probably needn't concern yourself with isdn4k-utils.
 
 o  Gnu C                  3.2                     # gcc --version
 o  Gnu make               3.80                    # make --version
@@ -114,12 +107,12 @@ Ksymoops
 
 If the unthinkable happens and your kernel oopses, you may need the
 ksymoops tool to decode it, but in most cases you don't.
-In the 2.6 kernel it is generally preferred to build the kernel with
-CONFIG_KALLSYMS so that it produces readable dumps that can be used as-is
-(this also produces better output than ksymoops).
-If for some reason your kernel is not build with CONFIG_KALLSYMS and
-you have no way to rebuild and reproduce the Oops with that option, then
-you can still decode that Oops with ksymoops.
+It is generally preferred to build the kernel with CONFIG_KALLSYMS so
+that it produces readable dumps that can be used as-is (this also
+produces better output than ksymoops).  If for some reason your kernel
+is not build with CONFIG_KALLSYMS and you have no way to rebuild and
+reproduce the Oops with that option, then you can still decode that Oops
+with ksymoops.
 
 Module-Init-Tools
 -----------------
@@ -261,8 +254,8 @@ needs to be recompiled or (preferably) upgraded.
 NFS-utils
 ---------
 
-In 2.4 and earlier kernels, the nfs server needed to know about any
-client that expected to be able to access files via NFS.  This
+In ancient (2.4 and earlier) kernels, the nfs server needed to know
+about any client that expected to be able to access files via NFS.  This
 information would be given to the kernel by "mountd" when the client
 mounted the filesystem, or by "exportfs" at system startup.  exportfs
 would take information about active clients from /var/lib/nfs/rmtab.
@@ -272,11 +265,11 @@ which is not always easy, particularly when trying to implement
 fail-over.  Even when the system is working well, rmtab suffers from
 getting lots of old entries that never get removed.
 
-With 2.6 we have the option of having the kernel tell mountd when it
-gets a request from an unknown host, and mountd can give appropriate
-export information to the kernel.  This removes the dependency on
-rmtab and means that the kernel only needs to know about currently
-active clients.
+With modern kernels we have the option of having the kernel tell mountd
+when it gets a request from an unknown host, and mountd can give
+appropriate export information to the kernel.  This removes the
+dependency on rmtab and means that the kernel only needs to know about
+currently active clients.
 
 To enable this new functionality, you need to:
 

Documentation/CodingStyle

@@ -680,8 +680,8 @@ ones already enabled by DEBUG.
 		Chapter 14: Allocating memory
 
 The kernel provides the following general purpose memory allocators:
-kmalloc(), kzalloc(), kcalloc(), and vmalloc().  Please refer to the API
-documentation for further information about them.
+kmalloc(), kzalloc(), kcalloc(), vmalloc(), and vzalloc().  Please refer to
+the API documentation for further information about them.
 
 The preferred form for passing a size of a struct is the following:
 

Documentation/cgroups/blkio-controller.txt

@@ -77,7 +77,7 @@ Throttling/Upper Limit policy
 - Specify a bandwidth rate on particular device for root group. The format
   for policy is "<major>:<minor>  <byes_per_second>".
 
-        echo "8:16  1048576" > /sys/fs/cgroup/blkio/blkio.read_bps_device
+        echo "8:16  1048576" > /sys/fs/cgroup/blkio/blkio.throttle.read_bps_device
 
   Above will put a limit of 1MB/second on reads happening for root group
   on device having major/minor number 8:16.
@@ -90,7 +90,7 @@ Throttling/Upper Limit policy
         1024+0 records out
         4194304 bytes (4.2 MB) copied, 4.0001 s, 1.0 MB/s
 
- Limits for writes can be put using blkio.write_bps_device file.
+ Limits for writes can be put using blkio.throttle.write_bps_device file.
 
 Hierarchical Cgroups
 ====================
@@ -286,28 +286,28 @@ Throttling/Upper limit policy files
 	  specified in bytes per second. Rules are per deivce. Following is
 	  the format.
 
-  echo "<major>:<minor>  <rate_bytes_per_second>" > /cgrp/blkio.read_bps_device
+  echo "<major>:<minor>  <rate_bytes_per_second>" > /cgrp/blkio.throttle.read_bps_device
 
 - blkio.throttle.write_bps_device
 	- Specifies upper limit on WRITE rate to the device. IO rate is
 	  specified in bytes per second. Rules are per deivce. Following is
 	  the format.
 
-  echo "<major>:<minor>  <rate_bytes_per_second>" > /cgrp/blkio.write_bps_device
+  echo "<major>:<minor>  <rate_bytes_per_second>" > /cgrp/blkio.throttle.write_bps_device
 
 - blkio.throttle.read_iops_device
 	- Specifies upper limit on READ rate from the device. IO rate is
 	  specified in IO per second. Rules are per deivce. Following is
 	  the format.
 
-  echo "<major>:<minor>  <rate_io_per_second>" > /cgrp/blkio.read_iops_device
+  echo "<major>:<minor>  <rate_io_per_second>" > /cgrp/blkio.throttle.read_iops_device
 
 - blkio.throttle.write_iops_device
 	- Specifies upper limit on WRITE rate to the device. IO rate is
 	  specified in io per second. Rules are per deivce. Following is
 	  the format.
 
-  echo "<major>:<minor>  <rate_io_per_second>" > /cgrp/blkio.write_iops_device
+  echo "<major>:<minor>  <rate_io_per_second>" > /cgrp/blkio.throttle.write_iops_device
 
 Note: If both BW and IOPS rules are specified for a device, then IO is
       subjectd to both the constraints.

Documentation/feature-removal-schedule.txt

@@ -583,3 +583,25 @@ Why:	Superseded by the UVCIOC_CTRL_QUERY ioctl.
 Who:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 
 ----------------------------
+
+What:	For VIDIOC_S_FREQUENCY the type field must match the device node's type.
+	If not, return -EINVAL.
+When:	3.2
+Why:	It makes no sense to switch the tuner to radio mode by calling
+	VIDIOC_S_FREQUENCY on a video node, or to switch the tuner to tv mode by
+	calling VIDIOC_S_FREQUENCY on a radio node. This is the first step of a
+	move to more consistent handling of tv and radio tuners.
+Who:	Hans Verkuil <hans.verkuil@cisco.com>
+
+----------------------------
+
+What:	Opening a radio device node will no longer automatically switch the
+	tuner mode from tv to radio.
+When:	3.3
+Why:	Just opening a V4L device should not change the state of the hardware
+	like that. It's very unexpected and against the V4L spec. Instead, you
+	switch to radio mode by calling VIDIOC_S_FREQUENCY. This is the second
+	and last step of the move to consistent handling of tv and radio tuners.
+Who:	Hans Verkuil <hans.verkuil@cisco.com>
+
+----------------------------

Documentation/filesystems/caching/netfs-api.txt

@@ -673,6 +673,22 @@ storage request to complete, or it may attempt to cancel the storage request -
 in which case the page will not be stored in the cache this time.
 
 
+BULK INODE PAGE UNCACHE
+-----------------------
+
+A convenience routine is provided to perform an uncache on all the pages
+attached to an inode.  This assumes that the pages on the inode correspond on a
+1:1 basis with the pages in the cache.
+
+	void fscache_uncache_all_inode_pages(struct fscache_cookie *cookie,
+					     struct inode *inode);
+
+This takes the netfs cookie that the pages were cached with and the inode that
+the pages are attached to.  This function will wait for pages to finish being
+written to the cache and for the cache to finish with the page generally.  No
+error is returned.
+
+
 ==========================
 INDEX AND DATA FILE UPDATE
 ==========================

Documentation/filesystems/proc.txt

@@ -843,6 +843,7 @@ Provides counts of softirq handlers serviced since boot time, for each cpu.
  TASKLET:          0          0          0        290
    SCHED:      27035      26983      26971      26746
  HRTIMER:          0          0          0          0
+     RCU:       1678       1769       2178       2250
 
 
 1.3 IDE devices in /proc/ide

Documentation/hwmon/f71882fg

@@ -22,6 +22,10 @@ Supported chips:
     Prefix: 'f71869'
     Addresses scanned: none, address read from Super I/O config space
     Datasheet: Available from the Fintek website
+  * Fintek F71869A
+    Prefix: 'f71869a'
+    Addresses scanned: none, address read from Super I/O config space
+    Datasheet: Not public
   * Fintek F71882FG and F71883FG
     Prefix: 'f71882fg'
     Addresses scanned: none, address read from Super I/O config space

Documentation/hwmon/k10temp

@@ -9,8 +9,8 @@ Supported chips:
   Socket S1G3: Athlon II, Sempron, Turion II
 * AMD Family 11h processors:
   Socket S1G2: Athlon (X2), Sempron (X2), Turion X2 (Ultra)
-* AMD Family 12h processors: "Llano"
-* AMD Family 14h processors: "Brazos" (C/E/G-Series)
+* AMD Family 12h processors: "Llano" (E2/A4/A6/A8-Series)
+* AMD Family 14h processors: "Brazos" (C/E/G/Z-Series)
 * AMD Family 15h processors: "Bulldozer"
 
   Prefix: 'k10temp'
@@ -20,12 +20,16 @@ Supported chips:
     http://support.amd.com/us/Processor_TechDocs/31116.pdf
   BIOS and Kernel Developer's Guide (BKDG) for AMD Family 11h Processors:
     http://support.amd.com/us/Processor_TechDocs/41256.pdf
+  BIOS and Kernel Developer's Guide (BKDG) for AMD Family 12h Processors:
+    http://support.amd.com/us/Processor_TechDocs/41131.pdf
   BIOS and Kernel Developer's Guide (BKDG) for AMD Family 14h Models 00h-0Fh Processors:
     http://support.amd.com/us/Processor_TechDocs/43170.pdf
   Revision Guide for AMD Family 10h Processors:
     http://support.amd.com/us/Processor_TechDocs/41322.pdf
   Revision Guide for AMD Family 11h Processors:
     http://support.amd.com/us/Processor_TechDocs/41788.pdf
+  Revision Guide for AMD Family 12h Processors:
+    http://support.amd.com/us/Processor_TechDocs/44739.pdf
   Revision Guide for AMD Family 14h Models 00h-0Fh Processors:
     http://support.amd.com/us/Processor_TechDocs/47534.pdf
   AMD Family 11h Processor Power and Thermal Data Sheet for Notebooks:

Documentation/kernel-parameters.txt

@@ -2015,6 +2015,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 				the default.
 				off: Turn ECRC off
 				on: Turn ECRC on.
+		realloc		reallocate PCI resources if allocations done by BIOS
+				are erroneous.
 
 	pcie_aspm=	[PCIE] Forcibly enable or disable PCIe Active State Power
 			Management.

Documentation/laptops/thinkpad-acpi.txt

@@ -534,6 +534,8 @@ Events that are never propagated by the driver:
 0x2404		System is waking up from hibernation to undock
 0x2405		System is waking up from hibernation to eject bay
 0x5010		Brightness level changed/control event
+0x6000		KEYBOARD: Numlock key pressed
+0x6005		KEYBOARD: Fn key pressed (TO BE VERIFIED)
 
 Events that are propagated by the driver to userspace:
 
@@ -545,6 +547,8 @@ Events that are propagated by the driver to userspace:
 0x3006		Bay hotplug request (hint to power up SATA link when
 		the optical drive tray is ejected)
 0x4003		Undocked (see 0x2x04), can sleep again
+0x4010		Docked into hotplug port replicator (non-ACPI dock)
+0x4011		Undocked from hotplug port replicator (non-ACPI dock)
 0x500B		Tablet pen inserted into its storage bay
 0x500C		Tablet pen removed from its storage bay
 0x6011		ALARM: battery is too hot
@@ -552,6 +556,7 @@ Events that are propagated by the driver to userspace:
 0x6021		ALARM: a sensor is too hot
 0x6022		ALARM: a sensor is extremely hot
 0x6030		System thermal table changed
+0x6040		Nvidia Optimus/AC adapter related (TO BE VERIFIED)
 
 Battery nearly empty alarms are a last resort attempt to get the
 operating system to hibernate or shutdown cleanly (0x2313), or shutdown

Documentation/power/devices.txt

@@ -520,59 +520,20 @@ Support for power domains is provided through the pwr_domain field of struct
 device.  This field is a pointer to an object of type struct dev_power_domain,
 defined in include/linux/pm.h, providing a set of power management callbacks
 analogous to the subsystem-level and device driver callbacks that are executed
-for the given device during all power transitions, in addition to the respective
-subsystem-level callbacks.  Specifically, the power domain "suspend" callbacks
-(i.e. ->runtime_suspend(), ->suspend(), ->freeze(), ->poweroff(), etc.) are
-executed after the analogous subsystem-level callbacks, while the power domain
-"resume" callbacks (i.e. ->runtime_resume(), ->resume(), ->thaw(), ->restore,
-etc.) are executed before the analogous subsystem-level callbacks.  Error codes
-returned by the "suspend" and "resume" power domain callbacks are ignored.
-
-Power domain ->runtime_idle() callback is executed before the subsystem-level
-->runtime_idle() callback and the result returned by it is not ignored.  Namely,
-if it returns error code, the subsystem-level ->runtime_idle() callback will not
-be called and the helper function rpm_idle() executing it will return error
-code.  This mechanism is intended to help platforms where saving device state
-is a time consuming operation and should only be carried out if all devices
-in the power domain are idle, before turning off the shared power resource(s).
-Namely, the power domain ->runtime_idle() callback may return error code until
-the pm_runtime_idle() helper (or its asychronous version) has been called for
-all devices in the power domain (it is recommended that the returned error code
-be -EBUSY in those cases), preventing the subsystem-level ->runtime_idle()
-callback from being run prematurely.
-
-The support for device power domains is only relevant to platforms needing to
-use the same subsystem-level (e.g. platform bus type) and device driver power
-management callbacks in many different power domain configurations and wanting
-to avoid incorporating the support for power domains into the subsystem-level
-callbacks.  The other platforms need not implement it or take it into account
-in any way.
-
-
-System Devices
---------------
-System devices (sysdevs) follow a slightly different API, which can be found in
-
-	include/linux/sysdev.h
-	drivers/base/sys.c
-
-System devices will be suspended with interrupts disabled, and after all other
-devices have been suspended.  On resume, they will be resumed before any other
-devices, and also with interrupts disabled.  These things occur in special
-"sysdev_driver" phases, which affect only system devices.
-
-Thus, after the suspend_noirq (or freeze_noirq or poweroff_noirq) phase, when
-the non-boot CPUs are all offline and IRQs are disabled on the remaining online
-CPU, then a sysdev_driver.suspend phase is carried out, and the system enters a
-sleep state (or a system image is created).  During resume (or after the image
-has been created or loaded) a sysdev_driver.resume phase is carried out, IRQs
-are enabled on the only online CPU, the non-boot CPUs are enabled, and the
-resume_noirq (or thaw_noirq or restore_noirq) phase begins.
-
-Code to actually enter and exit the system-wide low power state sometimes
-involves hardware details that are only known to the boot firmware, and
-may leave a CPU running software (from SRAM or flash memory) that monitors
-the system and manages its wakeup sequence.
+for the given device during all power transitions, instead of the respective
+subsystem-level callbacks.  Specifically, if a device's pm_domain pointer is
+not NULL, the ->suspend() callback from the object pointed to by it will be
+executed instead of its subsystem's (e.g. bus type's) ->suspend() callback and
+anlogously for all of the remaining callbacks.  In other words, power management
+domain callbacks, if defined for the given device, always take precedence over
+the callbacks provided by the device's subsystem (e.g. bus type).
+
+The support for device power management domains is only relevant to platforms
+needing to use the same device driver power management callbacks in many
+different power domain configurations and wanting to avoid incorporating the
+support for power domains into subsystem-level callbacks, for example by
+modifying the platform bus type.  Other platforms need not implement it or take
+it into account in any way.
 
 
 Device Low Power (suspend) States

Documentation/power/runtime_pm.txt

@@ -501,13 +501,29 @@ helper functions described in Section 4.  In that case, pm_runtime_resume()
 should be used.  Of course, for this purpose the device's run-time PM has to be
 enabled earlier by calling pm_runtime_enable().
 
-If the device bus type's or driver's ->probe() or ->remove() callback runs
+If the device bus type's or driver's ->probe() callback runs
 pm_runtime_suspend() or pm_runtime_idle() or their asynchronous counterparts,
 they will fail returning -EAGAIN, because the device's usage counter is
-incremented by the core before executing ->probe() and ->remove().  Still, it
-may be desirable to suspend the device as soon as ->probe() or ->remove() has
-finished, so the PM core uses pm_runtime_idle_sync() to invoke the
-subsystem-level idle callback for the device at that time.
+incremented by the driver core before executing ->probe().  Still, it may be
+desirable to suspend the device as soon as ->probe() has finished, so the driver
+core uses pm_runtime_put_sync() to invoke the subsystem-level idle callback for
+the device at that time.
+
+Moreover, the driver core prevents runtime PM callbacks from racing with the bus
+notifier callback in __device_release_driver(), which is necessary, because the
+notifier is used by some subsystems to carry out operations affecting the
+runtime PM functionality.  It does so by calling pm_runtime_get_sync() before
+driver_sysfs_remove() and the BUS_NOTIFY_UNBIND_DRIVER notifications.  This
+resumes the device if it's in the suspended state and prevents it from
+being suspended again while those routines are being executed.
+
+To allow bus types and drivers to put devices into the suspended state by
+calling pm_runtime_suspend() from their ->remove() routines, the driver core
+executes pm_runtime_put_sync() after running the BUS_NOTIFY_UNBIND_DRIVER
+notifications in __device_release_driver().  This requires bus types and
+drivers to make their ->remove() callbacks avoid races with runtime PM directly,
+but also it allows of more flexibility in the handling of devices during the
+removal of their drivers.
 
 The user space can effectively disallow the driver of the device to power manage
 it at run time by changing the value of its /sys/devices/.../power/control
@@ -566,11 +582,6 @@ to do this is:
 	pm_runtime_set_active(dev);
 	pm_runtime_enable(dev);
 
-The PM core always increments the run-time usage counter before calling the
-->prepare() callback and decrements it after calling the ->complete() callback.
-Hence disabling run-time PM temporarily like this will not cause any run-time
-suspend callbacks to be lost.
-
 7. Generic subsystem callbacks
 
 Subsystems may wish to conserve code space by using the set of generic power

Documentation/spinlocks.txt

@@ -13,18 +13,8 @@ static DEFINE_SPINLOCK(xxx_lock);
 The above is always safe. It will disable interrupts _locally_, but the
 spinlock itself will guarantee the global lock, so it will guarantee that
 there is only one thread-of-control within the region(s) protected by that
-lock. This works well even under UP. The above sequence under UP
-essentially is just the same as doing
-
-	unsigned long flags;
-
-	save_flags(flags); cli();
-	 ... critical section ...
-	restore_flags(flags);
-
-so the code does _not_ need to worry about UP vs SMP issues: the spinlocks
-work correctly under both (and spinlocks are actually more efficient on
-architectures that allow doing the "save_flags + cli" in one operation).
+lock. This works well even under UP also, so the code does _not_ need to
+worry about UP vs SMP issues: the spinlocks work correctly under both.
 
    NOTE! Implications of spin_locks for memory are further described in:
 
@@ -36,27 +26,7 @@ The above is usually pretty simple (you usually need and want only one
 spinlock for most things - using more than one spinlock can make things a
 lot more complex and even slower and is usually worth it only for
 sequences that you _know_ need to be split up: avoid it at all cost if you
-aren't sure). HOWEVER, it _does_ mean that if you have some code that does
-
-	cli();
-	.. critical section ..
-	sti();
-
-and another sequence that does
-
-	spin_lock_irqsave(flags);
-	.. critical section ..
-	spin_unlock_irqrestore(flags);
-
-then they are NOT mutually exclusive, and the critical regions can happen
-at the same time on two different CPU's. That's fine per se, but the
-critical regions had better be critical for different things (ie they
-can't stomp on each other).
-
-The above is a problem mainly if you end up mixing code - for example the
-routines in ll_rw_block() tend to use cli/sti to protect the atomicity of
-their actions, and if a driver uses spinlocks instead then you should
-think about issues like the above.
+aren't sure).
 
 This is really the only really hard part about spinlocks: once you start
 using spinlocks they tend to expand to areas you might not have noticed
@@ -120,11 +90,10 @@ Lesson 3: spinlocks revisited.
 
 The single spin-lock primitives above are by no means the only ones. They
 are the most safe ones, and the ones that work under all circumstances,
-but partly _because_ they are safe they are also fairly slow. They are
-much faster than a generic global cli/sti pair, but slower than they'd
-need to be, because they do have to disable interrupts (which is just a
-single instruction on a x86, but it's an expensive one - and on other
-architectures it can be worse).
+but partly _because_ they are safe they are also fairly slow. They are slower
+than they'd need to be, because they do have to disable interrupts
+(which is just a single instruction on a x86, but it's an expensive one -
+and on other architectures it can be worse).
 
 If you have a case where you have to protect a data structure across
 several CPU's and you want to use spinlocks you can potentially use

Documentation/usb/error-codes.txt

@@ -76,6 +76,13 @@ A transfer's actual_length may be positive even when an error has been
 reported.  That's because transfers often involve several packets, so that
 one or more packets could finish before an error stops further endpoint I/O.
 
+For isochronous URBs, the urb status value is non-zero only if the URB is
+unlinked, the device is removed, the host controller is disabled, or the total
+transferred length is less than the requested length and the URB_SHORT_NOT_OK
+flag is set.  Completion handlers for isochronous URBs should only see
+urb->status set to zero, -ENOENT, -ECONNRESET, -ESHUTDOWN, or -EREMOTEIO.
+Individual frame descriptor status fields may report more status codes.
+
 
 0			Transfer completed successfully
 
@@ -132,7 +139,7 @@ one or more packets could finish before an error stops further endpoint I/O.
 			device removal events immediately.
 
 -EXDEV			ISO transfer only partially completed
-			look at individual frame status for details
+			(only set in iso_frame_desc[n].status, not urb->status)
 
 -EINVAL			ISO madness, if this happens: Log off and go home
 

MAINTAINERS

@@ -594,6 +594,16 @@ S:	Maintained
 F:	arch/arm/lib/floppydma.S
 F:	arch/arm/include/asm/floppy.h
 
+ARM PMU PROFILING AND DEBUGGING
+M:	Will Deacon <will.deacon@arm.com>
+S:	Maintained
+F:	arch/arm/kernel/perf_event*
+F:	arch/arm/oprofile/common.c
+F:	arch/arm/kernel/pmu.c
+F:	arch/arm/include/asm/pmu.h
+F:	arch/arm/kernel/hw_breakpoint.c
+F:	arch/arm/include/asm/hw_breakpoint.h
+
 ARM PORT
 M:	Russell King <linux@arm.linux.org.uk>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1345,16 +1355,18 @@ F:	drivers/auxdisplay/
 F:	include/linux/cfag12864b.h
 
 AVR32 ARCHITECTURE
-M:	Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
+M:	Haavard Skinnemoen <hskinnemoen@gmail.com>
+M:	Hans-Christian Egtvedt <egtvedt@samfundet.no>
 W:	http://www.atmel.com/products/AVR32/
 W:	http://avr32linux.org/
 W:	http://avrfreaks.net/
-S:	Supported
+S:	Maintained
 F:	arch/avr32/
 
 AVR32/AT32AP MACHINE SUPPORT
-M:	Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
-S:	Supported
+M:	Haavard Skinnemoen <hskinnemoen@gmail.com>
+M:	Hans-Christian Egtvedt <egtvedt@samfundet.no>
+S:	Maintained
 F:	arch/avr32/mach-at32ap/
 
 AX.25 NETWORK LAYER
@@ -1390,7 +1402,6 @@ F:	include/linux/backlight.h
 BATMAN ADVANCED
 M:	Marek Lindner <lindner_marek@yahoo.de>
 M:	Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
-M:	Sven Eckelmann <sven@narfation.org>
 L:	b.a.t.m.a.n@lists.open-mesh.org
 W:	http://www.open-mesh.org/
 S:	Maintained
@@ -1423,7 +1434,6 @@ S:	Supported
 F:	arch/blackfin/
 
 BLACKFIN EMAC DRIVER
-M:	Michael Hennerich <michael.hennerich@analog.com>
 L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org
 S:	Supported
@@ -1639,7 +1649,7 @@ CAN NETWORK LAYER
 M:	Oliver Hartkopp <socketcan@hartkopp.net>
 M:	Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
 M:	Urs Thuermann <urs.thuermann@volkswagen.de>
-L:	socketcan-core@lists.berlios.de
+L:	socketcan-core@lists.berlios.de (subscribers-only)
 L:	netdev@vger.kernel.org
 W:	http://developer.berlios.de/projects/socketcan/
 S:	Maintained
@@ -1651,7 +1661,7 @@ F:	include/linux/can/raw.h
 
 CAN NETWORK DRIVERS
 M:	Wolfgang Grandegger <wg@grandegger.com>
-L:	socketcan-core@lists.berlios.de
+L:	socketcan-core@lists.berlios.de (subscribers-only)
 L:	netdev@vger.kernel.org
 W:	http://developer.berlios.de/projects/socketcan/
 S:	Maintained
@@ -2197,7 +2207,7 @@ F:	drivers/acpi/dock.c
 DOCUMENTATION
 M:	Randy Dunlap <rdunlap@xenotime.net>
 L:	linux-doc@vger.kernel.org
-T:	quilt oss.oracle.com/~rdunlap/kernel-doc-patches/current/
+T:	quilt http://userweb.kernel.org/~rdunlap/kernel-doc-patches/current/
 S:	Maintained
 F:	Documentation/
 
@@ -2291,8 +2301,7 @@ F:	drivers/scsi/eata_pio.*
 
 EBTABLES
 M:	Bart De Schuymer <bart.de.schuymer@pandora.be>
-L:	ebtables-user@lists.sourceforge.net
-L:	ebtables-devel@lists.sourceforge.net
+L:	netfilter-devel@vger.kernel.org
 W:	http://ebtables.sourceforge.net/
 S:	Maintained
 F:	include/linux/netfilter_bridge/ebt_*.h
@@ -4983,7 +4992,7 @@ F:	drivers/power/power_supply*
 
 PNP SUPPORT
 M:	Adam Belay <abelay@mit.edu>
-M:	Bjorn Helgaas <bjorn.helgaas@hp.com>
+M:	Bjorn Helgaas <bhelgaas@google.com>
 S:	Maintained
 F:	drivers/pnp/
 
@@ -5182,6 +5191,7 @@ S:	Supported
 F:	drivers/net/qlcnic/
 
 QLOGIC QLGE 10Gb ETHERNET DRIVER
+M:	Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
 M:	Ron Mercer <ron.mercer@qlogic.com>
 M:	linux-driver@qlogic.com
 L:	netdev@vger.kernel.org
@@ -6435,8 +6445,9 @@ S:	Maintained
 F:	drivers/usb/misc/rio500*
 
 USB EHCI DRIVER
+M:	Alan Stern <stern@rowland.harvard.edu>
 L:	linux-usb@vger.kernel.org
-S:	Orphan
+S:	Maintained
 F:	Documentation/usb/ehci.txt
 F:	drivers/usb/host/ehci*
 
@@ -6466,6 +6477,12 @@ S:	Maintained
 F:	Documentation/hid/hiddev.txt
 F:	drivers/hid/usbhid/
 
+USB/IP DRIVERS
+M:	Matt Mooney <mfm@muteddisk.com>
+L:	linux-usb@vger.kernel.org
+S:	Maintained
+F:	drivers/staging/usbip/
+
 USB ISP116X DRIVER
 M:	Olav Kongas <ok@artecdesign.ee>
 L:	linux-usb@vger.kernel.org
@@ -6495,8 +6512,9 @@ S:	Maintained
 F:	sound/usb/midi.*
 
 USB OHCI DRIVER
+M:	Alan Stern <stern@rowland.harvard.edu>
 L:	linux-usb@vger.kernel.org
-S:	Orphan
+S:	Maintained
 F:	Documentation/usb/ohci.txt
 F:	drivers/usb/host/ohci*
 
@@ -6725,6 +6743,7 @@ F:	fs/fat/
 VIDEOBUF2 FRAMEWORK
 M:	Pawel Osciak <pawel@osciak.com>
 M:	Marek Szyprowski <m.szyprowski@samsung.com>
+M:	Kyungmin Park <kyungmin.park@samsung.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 F:	drivers/media/video/videobuf2-*
@@ -7007,6 +7026,13 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86.
 S:	Maintained
 F:	drivers/platform/x86
 
+X86 MCE INFRASTRUCTURE
+M:	Tony Luck <tony.luck@intel.com>
+M:	Borislav Petkov <bp@amd64.org>
+L:	linux-edac@vger.kernel.org
+S:	Maintained
+F:	arch/x86/kernel/cpu/mcheck/*
+
 XEN HYPERVISOR INTERFACE
 M:	Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
 M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 0
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc7
 NAME = Sneaky Weasel
 
 # *DOCUMENTATION*

README

@@ -1,6 +1,6 @@
-	Linux kernel release 2.6.xx <http://kernel.org/>
+	Linux kernel release 3.x <http://kernel.org/>
 
-These are the release notes for Linux version 2.6.  Read them carefully,
+These are the release notes for Linux version 3.  Read them carefully,
 as they tell you what this is all about, explain how to install the
 kernel, and what to do if something goes wrong. 
 
@@ -62,10 +62,10 @@ INSTALLING the kernel source:
    directory where you have permissions (eg. your home directory) and
    unpack it:
 
-		gzip -cd linux-2.6.XX.tar.gz | tar xvf -
+		gzip -cd linux-3.X.tar.gz | tar xvf -
 
    or
-		bzip2 -dc linux-2.6.XX.tar.bz2 | tar xvf -
+		bzip2 -dc linux-3.X.tar.bz2 | tar xvf -
 
 
    Replace "XX" with the version number of the latest kernel.
@@ -75,15 +75,15 @@ INSTALLING the kernel source:
    files.  They should match the library, and not get messed up by
    whatever the kernel-du-jour happens to be.
 
- - You can also upgrade between 2.6.xx releases by patching.  Patches are
+ - You can also upgrade between 3.x releases by patching.  Patches are
    distributed in the traditional gzip and the newer bzip2 format.  To
    install by patching, get all the newer patch files, enter the
-   top level directory of the kernel source (linux-2.6.xx) and execute:
+   top level directory of the kernel source (linux-3.x) and execute:
 
-		gzip -cd ../patch-2.6.xx.gz | patch -p1
+		gzip -cd ../patch-3.x.gz | patch -p1
 
    or
-		bzip2 -dc ../patch-2.6.xx.bz2 | patch -p1
+		bzip2 -dc ../patch-3.x.bz2 | patch -p1
 
    (repeat xx for all versions bigger than the version of your current
    source tree, _in_order_) and you should be ok.  You may want to remove
@@ -91,9 +91,9 @@ INSTALLING the kernel source:
    failed patches (xxx# or xxx.rej). If there are, either you or me has
    made a mistake.
 
-   Unlike patches for the 2.6.x kernels, patches for the 2.6.x.y kernels
+   Unlike patches for the 3.x kernels, patches for the 3.x.y kernels
    (also known as the -stable kernels) are not incremental but instead apply
-   directly to the base 2.6.x kernel.  Please read
+   directly to the base 3.x kernel.  Please read
    Documentation/applying-patches.txt for more information.
 
    Alternatively, the script patch-kernel can be used to automate this
@@ -107,14 +107,14 @@ INSTALLING the kernel source:
    an alternative directory can be specified as the second argument.
 
  - If you are upgrading between releases using the stable series patches
-   (for example, patch-2.6.xx.y), note that these "dot-releases" are
-   not incremental and must be applied to the 2.6.xx base tree. For
-   example, if your base kernel is 2.6.12 and you want to apply the
-   2.6.12.3 patch, you do not and indeed must not first apply the
-   2.6.12.1 and 2.6.12.2 patches. Similarly, if you are running kernel
-   version 2.6.12.2 and want to jump to 2.6.12.3, you must first
-   reverse the 2.6.12.2 patch (that is, patch -R) _before_ applying
-   the 2.6.12.3 patch.
+   (for example, patch-3.x.y), note that these "dot-releases" are
+   not incremental and must be applied to the 3.x base tree. For
+   example, if your base kernel is 3.0 and you want to apply the
+   3.0.3 patch, you do not and indeed must not first apply the
+   3.0.1 and 3.0.2 patches. Similarly, if you are running kernel
+   version 3.0.2 and want to jump to 3.0.3, you must first
+   reverse the 3.0.2 patch (that is, patch -R) _before_ applying
+   the 3.0.3 patch.
    You can read more on this in Documentation/applying-patches.txt
 
  - Make sure you have no stale .o files and dependencies lying around:
@@ -126,7 +126,7 @@ INSTALLING the kernel source:
 
 SOFTWARE REQUIREMENTS
 
-   Compiling and running the 2.6.xx kernels requires up-to-date
+   Compiling and running the 3.x kernels requires up-to-date
    versions of various software packages.  Consult
    Documentation/Changes for the minimum version numbers required
    and how to get updates for these packages.  Beware that using
@@ -142,11 +142,11 @@ BUILD directory for the kernel:
    Using the option "make O=output/dir" allow you to specify an alternate
    place for the output files (including .config).
    Example:
-     kernel source code:	/usr/src/linux-2.6.N
+     kernel source code:	/usr/src/linux-3.N
      build directory:		/home/name/build/kernel
 
    To configure and build the kernel use:
-   cd /usr/src/linux-2.6.N
+   cd /usr/src/linux-3.N
    make O=/home/name/build/kernel menuconfig
    make O=/home/name/build/kernel
    sudo make O=/home/name/build/kernel modules_install install

arch/alpha/include/asm/mmzone.h

@@ -56,7 +56,6 @@ PLAT_NODE_DATA_LOCALNR(unsigned long p, int n)
  * Given a kernel address, find the home node of the underlying memory.
  */
 #define kvaddr_to_nid(kaddr)	pa_to_nid(__pa(kaddr))
-#define node_start_pfn(nid)	(NODE_DATA(nid)->node_start_pfn)
 
 /*
  * Given a kaddr, LOCAL_BASE_ADDR finds the owning node of the memory

arch/arm/boot/compressed/head.S

@@ -597,6 +597,8 @@ __common_mmu_cache_on:
 		sub	pc, lr, r0, lsr #32	@ properly flush pipeline
 #endif
 
+#define PROC_ENTRY_SIZE (4*5)
+
 /*
  * Here follow the relocatable cache support functions for the
  * various processors.  This is a generic hook for locating an
@@ -624,7 +626,7 @@ call_cache_fn:	adr	r12, proc_types
  ARM(		addeq	pc, r12, r3		) @ call cache function
  THUMB(		addeq	r12, r3			)
  THUMB(		moveq	pc, r12			) @ call cache function
-		add	r12, r12, #4*5
+		add	r12, r12, #PROC_ENTRY_SIZE
 		b	1b
 
 /*
@@ -794,6 +796,16 @@ proc_types:
 
 		.size	proc_types, . - proc_types
 
+		/*
+		 * If you get a "non-constant expression in ".if" statement"
+		 * error from the assembler on this line, check that you have
+		 * not accidentally written a "b" instruction where you should
+		 * have written W(b).
+		 */
+		.if (. - proc_types) % PROC_ENTRY_SIZE != 0
+		.error "The size of one or more proc_types entries is wrong."
+		.endif
+
 /*
  * Turn off the Cache and MMU.  ARMv3 does not support
  * reading the control register, but ARMv4 does.

arch/arm/common/dmabounce.c

@@ -255,7 +255,7 @@ static inline dma_addr_t map_single(struct device *dev, void *ptr, size_t size,
 		if (buf == 0) {
 			dev_err(dev, "%s: unable to map unsafe buffer %p!\n",
 			       __func__, ptr);
-			return 0;
+			return ~0;
 		}
 
 		dev_dbg(dev,

arch/arm/include/asm/assembler.h

@@ -13,6 +13,9 @@
  *  Do not include any C declarations in this file - it is included by
  *  assembler source.
  */
+#ifndef __ASM_ASSEMBLER_H__
+#define __ASM_ASSEMBLER_H__
+
 #ifndef __ASSEMBLY__
 #error "Only include this from assembly code"
 #endif
@@ -290,3 +293,4 @@
 	.macro	ldrusr, reg, ptr, inc, cond=al, rept=1, abort=9001f
 	usracc	ldr, \reg, \ptr, \inc, \cond, \rept, \abort
 	.endm
+#endif /* __ASM_ASSEMBLER_H__ */

arch/arm/include/asm/entry-macro-multi.S

@@ -1,3 +1,5 @@
+#include <asm/assembler.h>
+
 /*
  * Interrupt handling.  Preserves r7, r8, r9
  */

arch/arm/kernel/module.c

@@ -193,8 +193,17 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 				offset -= 0x02000000;
 			offset += sym->st_value - loc;
 
-			/* only Thumb addresses allowed (no interworking) */
-			if (!(offset & 1) ||
+			/*
+			 * For function symbols, only Thumb addresses are
+			 * allowed (no interworking).
+			 *
+			 * For non-function symbols, the destination
+			 * has no specific ARM/Thumb disposition, so
+			 * the branch is resolved under the assumption
+			 * that interworking is not required.
+			 */
+			if ((ELF32_ST_TYPE(sym->st_info) == STT_FUNC &&
+				!(offset & 1)) ||
 			    offset <= (s32)0xff000000 ||
 			    offset >= (s32)0x01000000) {
 				pr_err("%s: section %u reloc %u sym '%s': relocation %u out of range (%#lx -> %#x)\n",

arch/arm/kernel/perf_event.c

@@ -583,7 +583,7 @@ static int armpmu_event_init(struct perf_event *event)
 static void armpmu_enable(struct pmu *pmu)
 {
 	/* Enable all of the perf events on hardware. */
-	int idx;
+	int idx, enabled = 0;
 	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
 
 	if (!armpmu)
@@ -596,9 +596,11 @@ static void armpmu_enable(struct pmu *pmu)
 			continue;
 
 		armpmu->enable(&event->hw, idx);
+		enabled = 1;
 	}
 
-	armpmu->start();
+	if (enabled)
+		armpmu->start();
 }
 
 static void armpmu_disable(struct pmu *pmu)

arch/arm/kernel/setup.c

@@ -73,6 +73,7 @@ __setup("fpe=", fpe_setup);
 #endif
 
 extern void paging_init(struct machine_desc *desc);
+extern void sanity_check_meminfo(void);
 extern void reboot_setup(char *str);
 
 unsigned int processor_id;
@@ -900,6 +901,7 @@ void __init setup_arch(char **cmdline_p)
 
 	parse_early_param();
 
+	sanity_check_meminfo();
 	arm_memblock_init(&meminfo, mdesc);
 
 	paging_init(mdesc);

arch/arm/kernel/smp.c

@@ -318,9 +318,13 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
 	smp_store_cpu_info(cpu);
 
 	/*
-	 * OK, now it's safe to let the boot CPU continue
+	 * OK, now it's safe to let the boot CPU continue.  Wait for
+	 * the CPU migration code to notice that the CPU is online
+	 * before we continue.
 	 */
 	set_cpu_online(cpu, true);
+	while (!cpu_active(cpu))
+		cpu_relax();
 
 	/*
 	 * OK, it's off to the idle thread for us

arch/arm/kernel/smp_twd.c

@@ -115,7 +115,7 @@ static void __cpuinit twd_calibrate_rate(void)
 		twd_timer_rate = (0xFFFFFFFFU - count) * (HZ / 5);
 
 		printk("%lu.%02luMHz.\n", twd_timer_rate / 1000000,
-			(twd_timer_rate / 1000000) % 100);
+			(twd_timer_rate / 10000) % 100);
 	}
 }
 

arch/arm/mach-at91/at91cap9.c

@@ -223,15 +223,15 @@ static struct clk *periph_clocks[] __initdata = {
 };
 
 static struct clk_lookup periph_clocks_lookups[] = {
-	CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk),
-	CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk),
+	CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
+	CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
 	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
 	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk),
 	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
 	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
-	CLKDEV_CON_DEV_ID("ssc", "ssc.0", &ssc0_clk),
-	CLKDEV_CON_DEV_ID("ssc", "ssc.1", &ssc1_clk),
+	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
+	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
 };
 
 static struct clk_lookup usart_clocks_lookups[] = {

arch/arm/mach-at91/at91cap9_devices.c

@@ -1220,7 +1220,7 @@ void __init at91_set_serial_console(unsigned portnr)
 {
 	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
-		at91cap9_set_console_clock(portnr);
+		at91cap9_set_console_clock(at91_uarts[portnr]->id);
 	}
 }
 

arch/arm/mach-at91/at91rm9200.c

@@ -199,9 +199,9 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk),
 	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk),
 	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk),
-	CLKDEV_CON_DEV_ID("ssc", "ssc.0", &ssc0_clk),
-	CLKDEV_CON_DEV_ID("ssc", "ssc.1", &ssc1_clk),
-	CLKDEV_CON_DEV_ID("ssc", "ssc.2", &ssc2_clk),
+	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
+	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
+	CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk),
 };
 
 static struct clk_lookup usart_clocks_lookups[] = {

arch/arm/mach-at91/at91rm9200_devices.c

@@ -1135,7 +1135,7 @@ void __init at91_set_serial_console(unsigned portnr)
 {
 	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
-		at91rm9200_set_console_clock(portnr);
+		at91rm9200_set_console_clock(at91_uarts[portnr]->id);
 	}
 }
 

arch/arm/mach-at91/at91sam9260_devices.c

@@ -1173,7 +1173,7 @@ void __init at91_set_serial_console(unsigned portnr)
 {
 	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
-		at91sam9260_set_console_clock(portnr);
+		at91sam9260_set_console_clock(at91_uarts[portnr]->id);
 	}
 }
 

arch/arm/mach-at91/at91sam9261_devices.c

@@ -1013,7 +1013,7 @@ void __init at91_set_serial_console(unsigned portnr)
 {
 	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
-		at91sam9261_set_console_clock(portnr);
+		at91sam9261_set_console_clock(at91_uarts[portnr]->id);
 	}
 }
 

arch/arm/mach-at91/at91sam9263_devices.c

@@ -1395,7 +1395,7 @@ void __init at91_set_serial_console(unsigned portnr)
 {
 	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
-		at91sam9263_set_console_clock(portnr);
+		at91sam9263_set_console_clock(at91_uarts[portnr]->id);
 	}
 }
 

arch/arm/mach-at91/at91sam9g45.c

@@ -217,11 +217,11 @@ static struct clk *periph_clocks[] __initdata = {
 static struct clk_lookup periph_clocks_lookups[] = {
 	/* One additional fake clock for ohci */
 	CLKDEV_CON_ID("ohci_clk", &uhphs_clk),
-	CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci.0", &uhphs_clk),
-	CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk),
-	CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk),
-	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
-	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk),
+	CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci", &uhphs_clk),
+	CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
+	CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.0", &mmc0_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.1", &mmc1_clk),
 	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
 	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb0_clk),

arch/arm/mach-at91/at91sam9g45_devices.c

@@ -1550,7 +1550,7 @@ void __init at91_set_serial_console(unsigned portnr)
 {
 	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
-		at91sam9g45_set_console_clock(portnr);
+		at91sam9g45_set_console_clock(at91_uarts[portnr]->id);
 	}
 }
 

arch/arm/mach-at91/at91sam9rl.c

@@ -191,8 +191,8 @@ static struct clk *periph_clocks[] __initdata = {
 };
 
 static struct clk_lookup periph_clocks_lookups[] = {
-	CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk),
-	CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk),
+	CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
+	CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
 	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
 	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),

arch/arm/mach-at91/at91sam9rl_devices.c

@@ -1168,7 +1168,7 @@ void __init at91_set_serial_console(unsigned portnr)
 {
 	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
-		at91sam9rl_set_console_clock(portnr);
+		at91sam9rl_set_console_clock(at91_uarts[portnr]->id);
 	}
 }
 

arch/arm/mach-at91/board-cap9adk.c

@@ -215,7 +215,7 @@ static void __init cap9adk_add_device_nand(void)
 	csa = at91_sys_read(AT91_MATRIX_EBICSA);
 	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
 
-	cap9adk_nand_data.bus_width_16 = !board_have_nand_8bit();
+	cap9adk_nand_data.bus_width_16 = board_have_nand_16bit();
 	/* setup bus-width (8 or 16) */
 	if (cap9adk_nand_data.bus_width_16)
 		cap9adk_nand_smc_config.mode |= AT91_SMC_DBW_16;

arch/arm/mach-at91/board-sam9260ek.c

@@ -214,7 +214,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
 
 static void __init ek_add_device_nand(void)
 {
-	ek_nand_data.bus_width_16 = !board_have_nand_8bit();
+	ek_nand_data.bus_width_16 = board_have_nand_16bit();
 	/* setup bus-width (8 or 16) */
 	if (ek_nand_data.bus_width_16)
 		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;

arch/arm/mach-at91/board-sam9261ek.c

@@ -220,7 +220,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
 
 static void __init ek_add_device_nand(void)
 {
-	ek_nand_data.bus_width_16 = !board_have_nand_8bit();
+	ek_nand_data.bus_width_16 = board_have_nand_16bit();
 	/* setup bus-width (8 or 16) */
 	if (ek_nand_data.bus_width_16)
 		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;

arch/arm/mach-at91/board-sam9263ek.c

@@ -221,7 +221,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
 
 static void __init ek_add_device_nand(void)
 {
-	ek_nand_data.bus_width_16 = !board_have_nand_8bit();
+	ek_nand_data.bus_width_16 = board_have_nand_16bit();
 	/* setup bus-width (8 or 16) */
 	if (ek_nand_data.bus_width_16)
 		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;

arch/arm/mach-at91/board-sam9g20ek.c

@@ -198,7 +198,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
 
 static void __init ek_add_device_nand(void)
 {
-	ek_nand_data.bus_width_16 = !board_have_nand_8bit();
+	ek_nand_data.bus_width_16 = board_have_nand_16bit();
 	/* setup bus-width (8 or 16) */
 	if (ek_nand_data.bus_width_16)
 		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;

arch/arm/mach-at91/board-sam9m10g45ek.c

@@ -178,7 +178,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
 
 static void __init ek_add_device_nand(void)
 {
-	ek_nand_data.bus_width_16 = !board_have_nand_8bit();
+	ek_nand_data.bus_width_16 = board_have_nand_16bit();
 	/* setup bus-width (8 or 16) */
 	if (ek_nand_data.bus_width_16)
 		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;

arch/arm/mach-at91/include/mach/system_rev.h

@@ -13,13 +13,13 @@
  * the 16-31 bit are reserved for at91 generic information
  *
  * bit 31:
- *	0 => nand 16 bit
- *	1 => nand 8 bit
+ *	0 => nand 8 bit
+ *	1 => nand 16 bit
  */
-#define BOARD_HAVE_NAND_8BIT	(1 << 31)
-static int inline board_have_nand_8bit(void)
+#define BOARD_HAVE_NAND_16BIT	(1 << 31)
+static inline int board_have_nand_16bit(void)
 {
-	return system_rev & BOARD_HAVE_NAND_8BIT;
+	return system_rev & BOARD_HAVE_NAND_16BIT;
 }
 
 #endif /* __ARCH_SYSTEM_REV_H__ */

arch/arm/mach-ep93xx/core.c

@@ -251,9 +251,9 @@ static void ep93xx_uart_set_mctrl(struct amba_device *dev,
 	unsigned int mcr;
 
 	mcr = 0;
-	if (!(mctrl & TIOCM_RTS))
+	if (mctrl & TIOCM_RTS)
 		mcr |= 2;
-	if (!(mctrl & TIOCM_DTR))
+	if (mctrl & TIOCM_DTR)
 		mcr |= 1;
 
 	__raw_writel(mcr, base + EP93XX_UART_MCR_OFFSET);

arch/arm/mach-exynos4/cpu.c

@@ -23,6 +23,7 @@
 #include <plat/sdhci.h>
 #include <plat/devs.h>
 #include <plat/fimc-core.h>
+#include <plat/iic-core.h>
 
 #include <mach/regs-irq.h>
 
@@ -132,6 +133,11 @@ void __init exynos4_map_io(void)
 	s3c_fimc_setname(1, "exynos4-fimc");
 	s3c_fimc_setname(2, "exynos4-fimc");
 	s3c_fimc_setname(3, "exynos4-fimc");
+
+	/* The I2C bus controllers are directly compatible with s3c2440 */
+	s3c_i2c0_setname("s3c2440-i2c");
+	s3c_i2c1_setname("s3c2440-i2c");
+	s3c_i2c2_setname("s3c2440-i2c");
 }
 
 void __init exynos4_init_clocks(int xtal)

arch/arm/mach-exynos4/dev-audio.c

@@ -330,7 +330,7 @@ struct platform_device exynos4_device_ac97 = {
 
 static int exynos4_spdif_cfg_gpio(struct platform_device *pdev)
 {
-	s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 2, S3C_GPIO_SFN(3));
+	s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 2, S3C_GPIO_SFN(4));
 
 	return 0;
 }

arch/arm/mach-exynos4/headsmp.S

@@ -13,7 +13,7 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 
-	__INIT
+	__CPUINIT
 
 /*
  * exynos4 specific entry point for secondary CPUs.  This provides

arch/arm/mach-exynos4/init.c

@@ -35,6 +35,7 @@ void __init exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 			tcfg->clocks = exynos4_serial_clocks;
 			tcfg->clocks_size = ARRAY_SIZE(exynos4_serial_clocks);
 		}
+		tcfg->flags |= NO_NEED_CHECK_CLKSRC;
 	}
 
 	s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);

arch/arm/mach-exynos4/mach-smdkv310.c

@@ -78,9 +78,7 @@ static struct s3c2410_uartcfg smdkv310_uartcfgs[] __initdata = {
 };
 
 static struct s3c_sdhci_platdata smdkv310_hsmmc0_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_GPIO,
-	.ext_cd_gpio		= EXYNOS4_GPK0(2),
-	.ext_cd_gpio_invert	= 1,
+	.cd_type		= S3C_SDHCI_CD_INTERNAL,
 	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
 #ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT
 	.max_width		= 8,
@@ -96,9 +94,7 @@ static struct s3c_sdhci_platdata smdkv310_hsmmc1_pdata __initdata = {
 };
 
 static struct s3c_sdhci_platdata smdkv310_hsmmc2_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_GPIO,
-	.ext_cd_gpio		= EXYNOS4_GPK2(2),
-	.ext_cd_gpio_invert	= 1,
+	.cd_type		= S3C_SDHCI_CD_INTERNAL,
 	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
 #ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT
 	.max_width		= 8,

arch/arm/mach-h720x/Kconfig

@@ -6,12 +6,14 @@ config ARCH_H7201
 	bool "gms30c7201"
 	depends on ARCH_H720X
 	select CPU_H7201
+	select ZONE_DMA
 	help
 	  Say Y here if you are using the Hynix GMS30C7201 Reference Board
 
 config ARCH_H7202
 	bool "hms30c7202"
 	select CPU_H7202
+	select ZONE_DMA
 	depends on ARCH_H720X
 	help
 	  Say Y here if you are using the Hynix HMS30C7202 Reference Board

arch/arm/mach-msm/timer.c

@@ -23,6 +23,8 @@
 #include <linux/io.h>
 
 #include <asm/mach/time.h>
+#include <asm/hardware/gic.h>
+
 #include <mach/msm_iomap.h>
 #include <mach/cpu.h>
 
@@ -55,10 +57,12 @@ enum timer_location {
 #if defined(CONFIG_ARCH_QSD8X50)
 #define DGT_HZ (19200000 / 4) /* 19.2 MHz / 4 by default */
 #define MSM_DGT_SHIFT (0)
-#elif defined(CONFIG_ARCH_MSM7X30) || defined(CONFIG_ARCH_MSM8X60) || \
-				      defined(CONFIG_ARCH_MSM8960)
+#elif defined(CONFIG_ARCH_MSM7X30)
 #define DGT_HZ (24576000 / 4) /* 24.576 MHz (LPXO) / 4 by default */
 #define MSM_DGT_SHIFT (0)
+#elif defined(CONFIG_ARCH_MSM8X60) || defined(CONFIG_ARCH_MSM8960)
+#define DGT_HZ (27000000 / 4) /* 27 MHz (PXO) / 4 by default */
+#define MSM_DGT_SHIFT (0)
 #else
 #define DGT_HZ 19200000 /* 19.2 MHz or 600 KHz after shift */
 #define MSM_DGT_SHIFT (5)
@@ -100,7 +104,11 @@ static cycle_t msm_read_timer_count(struct clocksource *cs)
 {
 	struct msm_clock *clk = container_of(cs, struct msm_clock, clocksource);
 
-	return readl(clk->global_counter);
+	/*
+	 * Shift timer count down by a constant due to unreliable lower bits
+	 * on some targets.
+	 */
+	return readl(clk->global_counter) >> clk->shift;
 }
 
 static struct msm_clock *clockevent_to_clock(struct clock_event_device *evt)

arch/arm/mach-omap1/board-ams-delta.c

@@ -215,7 +215,7 @@ static struct omap_kp_platform_data ams_delta_kp_data __initdata = {
 	.delay		= 9,
 };
 
-static struct platform_device ams_delta_kp_device __initdata = {
+static struct platform_device ams_delta_kp_device = {
 	.name		= "omap-keypad",
 	.id		= -1,
 	.dev		= {
@@ -225,12 +225,12 @@ static struct platform_device ams_delta_kp_device __initdata = {
 	.resource	= ams_delta_kp_resources,
 };
 
-static struct platform_device ams_delta_lcd_device __initdata = {
+static struct platform_device ams_delta_lcd_device = {
 	.name	= "lcd_ams_delta",
 	.id	= -1,
 };
 
-static struct platform_device ams_delta_led_device __initdata = {
+static struct platform_device ams_delta_led_device = {
 	.name	= "ams-delta-led",
 	.id	= -1
 };
@@ -267,7 +267,7 @@ static struct soc_camera_link ams_delta_iclink = {
 	.power		= ams_delta_camera_power,
 };
 
-static struct platform_device ams_delta_camera_device __initdata = {
+static struct platform_device ams_delta_camera_device = {
 	.name   = "soc-camera-pdrv",
 	.id     = 0,
 	.dev    = {

arch/arm/mach-omap1/gpio15xx.c

@@ -41,7 +41,7 @@ static struct __initdata omap_gpio_platform_data omap15xx_mpu_gpio_config = {
 	.bank_stride		= 1,
 };
 
-static struct __initdata platform_device omap15xx_mpu_gpio = {
+static struct platform_device omap15xx_mpu_gpio = {
 	.name           = "omap_gpio",
 	.id             = 0,
 	.dev            = {
@@ -70,7 +70,7 @@ static struct __initdata omap_gpio_platform_data omap15xx_gpio_config = {
 	.bank_width		= 16,
 };
 
-static struct __initdata platform_device omap15xx_gpio = {
+static struct platform_device omap15xx_gpio = {
 	.name           = "omap_gpio",
 	.id             = 1,
 	.dev            = {

arch/arm/mach-omap1/gpio16xx.c

@@ -44,7 +44,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_mpu_gpio_config = {
 	.bank_stride		= 1,
 };
 
-static struct __initdata platform_device omap16xx_mpu_gpio = {
+static struct platform_device omap16xx_mpu_gpio = {
 	.name           = "omap_gpio",
 	.id             = 0,
 	.dev            = {
@@ -73,7 +73,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio1_config = {
 	.bank_width		= 16,
 };
 
-static struct __initdata platform_device omap16xx_gpio1 = {
+static struct platform_device omap16xx_gpio1 = {
 	.name           = "omap_gpio",
 	.id             = 1,
 	.dev            = {
@@ -102,7 +102,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio2_config = {
 	.bank_width		= 16,
 };
 
-static struct __initdata platform_device omap16xx_gpio2 = {
+static struct platform_device omap16xx_gpio2 = {
 	.name           = "omap_gpio",
 	.id             = 2,
 	.dev            = {
@@ -131,7 +131,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio3_config = {
 	.bank_width		= 16,
 };
 
-static struct __initdata platform_device omap16xx_gpio3 = {
+static struct platform_device omap16xx_gpio3 = {
 	.name           = "omap_gpio",
 	.id             = 3,
 	.dev            = {
@@ -160,7 +160,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio4_config = {
 	.bank_width		= 16,
 };
 
-static struct __initdata platform_device omap16xx_gpio4 = {
+static struct platform_device omap16xx_gpio4 = {
 	.name           = "omap_gpio",
 	.id             = 4,
 	.dev            = {

arch/arm/mach-omap1/gpio7xx.c

@@ -46,7 +46,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_mpu_gpio_config = {
 	.bank_stride		= 2,
 };
 
-static struct __initdata platform_device omap7xx_mpu_gpio = {
+static struct platform_device omap7xx_mpu_gpio = {
 	.name           = "omap_gpio",
 	.id             = 0,
 	.dev            = {
@@ -75,7 +75,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio1_config = {
 	.bank_width		= 32,
 };
 
-static struct __initdata platform_device omap7xx_gpio1 = {
+static struct platform_device omap7xx_gpio1 = {
 	.name           = "omap_gpio",
 	.id             = 1,
 	.dev            = {
@@ -104,7 +104,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio2_config = {
 	.bank_width		= 32,
 };
 
-static struct __initdata platform_device omap7xx_gpio2 = {
+static struct platform_device omap7xx_gpio2 = {
 	.name           = "omap_gpio",
 	.id             = 2,
 	.dev            = {
@@ -133,7 +133,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio3_config = {
 	.bank_width		= 32,
 };
 
-static struct __initdata platform_device omap7xx_gpio3 = {
+static struct platform_device omap7xx_gpio3 = {
 	.name           = "omap_gpio",
 	.id             = 3,
 	.dev            = {
@@ -162,7 +162,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio4_config = {
 	.bank_width		= 32,
 };
 
-static struct __initdata platform_device omap7xx_gpio4 = {
+static struct platform_device omap7xx_gpio4 = {
 	.name           = "omap_gpio",
 	.id             = 4,
 	.dev            = {
@@ -191,7 +191,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio5_config = {
 	.bank_width		= 32,
 };
 
-static struct __initdata platform_device omap7xx_gpio5 = {
+static struct platform_device omap7xx_gpio5 = {
 	.name           = "omap_gpio",
 	.id             = 5,
 	.dev            = {
@@ -220,7 +220,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio6_config = {
 	.bank_width		= 32,
 };
 
-static struct __initdata platform_device omap7xx_gpio6 = {
+static struct platform_device omap7xx_gpio6 = {
 	.name           = "omap_gpio",
 	.id             = 6,
 	.dev            = {

arch/arm/mach-omap2/board-rx51-peripherals.c

@@ -558,7 +558,7 @@ static struct radio_si4713_platform_data rx51_si4713_data __initdata_or_module =
 	.subdev_board_info = &rx51_si4713_board_info,
 };
 
-static struct platform_device rx51_si4713_dev __initdata_or_module = {
+static struct platform_device rx51_si4713_dev = {
 	.name	= "radio-si4713",
 	.id	= -1,
 	.dev	= {

arch/arm/mach-s3c2440/mach-mini2440.c

@@ -552,7 +552,7 @@ struct mini2440_features_t {
 	struct platform_device *optional[8];
 };
 
-static void mini2440_parse_features(
+static void __init mini2440_parse_features(
 		struct mini2440_features_t * features,
 		const char * features_str )
 {

arch/arm/mach-s3c64xx/dev-spi.c

@@ -88,6 +88,7 @@ static struct s3c64xx_spi_info s3c64xx_spi0_pdata = {
 	.cfg_gpio = s3c64xx_spi_cfg_gpio,
 	.fifo_lvl_mask = 0x7f,
 	.rx_lvl_offset = 13,
+	.tx_st_done = 21,
 };
 
 static u64 spi_dmamask = DMA_BIT_MASK(32);
@@ -132,6 +133,7 @@ static struct s3c64xx_spi_info s3c64xx_spi1_pdata = {
 	.cfg_gpio = s3c64xx_spi_cfg_gpio,
 	.fifo_lvl_mask = 0x7f,
 	.rx_lvl_offset = 13,
+	.tx_st_done = 21,
 };
 
 struct platform_device s3c64xx_device_spi1 = {

arch/arm/mach-s5p64x0/dev-spi.c

@@ -112,12 +112,14 @@ static struct s3c64xx_spi_info s5p6440_spi0_pdata = {
 	.cfg_gpio	= s5p6440_spi_cfg_gpio,
 	.fifo_lvl_mask	= 0x1ff,
 	.rx_lvl_offset	= 15,
+	.tx_st_done	= 25,
 };
 
 static struct s3c64xx_spi_info s5p6450_spi0_pdata = {
 	.cfg_gpio	= s5p6450_spi_cfg_gpio,
 	.fifo_lvl_mask	= 0x1ff,
 	.rx_lvl_offset	= 15,
+	.tx_st_done	= 25,
 };
 
 static u64 spi_dmamask = DMA_BIT_MASK(32);
@@ -160,12 +162,14 @@ static struct s3c64xx_spi_info s5p6440_spi1_pdata = {
 	.cfg_gpio	= s5p6440_spi_cfg_gpio,
 	.fifo_lvl_mask	= 0x7f,
 	.rx_lvl_offset	= 15,
+	.tx_st_done	= 25,
 };
 
 static struct s3c64xx_spi_info s5p6450_spi1_pdata = {
 	.cfg_gpio	= s5p6450_spi_cfg_gpio,
 	.fifo_lvl_mask	= 0x7f,
 	.rx_lvl_offset	= 15,
+	.tx_st_done	= 25,
 };
 
 struct platform_device s5p64x0_device_spi1 = {

arch/arm/mach-s5pc100/dev-spi.c

@@ -15,6 +15,7 @@
 #include <mach/dma.h>
 #include <mach/map.h>
 #include <mach/spi-clocks.h>
+#include <mach/irqs.h>
 
 #include <plat/s3c64xx-spi.h>
 #include <plat/gpio-cfg.h>
@@ -90,6 +91,7 @@ static struct s3c64xx_spi_info s5pc100_spi0_pdata = {
 	.fifo_lvl_mask = 0x7f,
 	.rx_lvl_offset = 13,
 	.high_speed = 1,
+	.tx_st_done = 21,
 };
 
 static u64 spi_dmamask = DMA_BIT_MASK(32);
@@ -134,6 +136,7 @@ static struct s3c64xx_spi_info s5pc100_spi1_pdata = {
 	.fifo_lvl_mask = 0x7f,
 	.rx_lvl_offset = 13,
 	.high_speed = 1,
+	.tx_st_done = 21,
 };
 
 struct platform_device s5pc100_device_spi1 = {
@@ -176,6 +179,7 @@ static struct s3c64xx_spi_info s5pc100_spi2_pdata = {
 	.fifo_lvl_mask = 0x7f,
 	.rx_lvl_offset = 13,
 	.high_speed = 1,
+	.tx_st_done = 21,
 };
 
 struct platform_device s5pc100_device_spi2 = {

arch/arm/mach-s5pv210/dev-spi.c

@@ -85,6 +85,7 @@ static struct s3c64xx_spi_info s5pv210_spi0_pdata = {
 	.fifo_lvl_mask = 0x1ff,
 	.rx_lvl_offset = 15,
 	.high_speed = 1,
+	.tx_st_done = 25,
 };
 
 static u64 spi_dmamask = DMA_BIT_MASK(32);
@@ -129,6 +130,7 @@ static struct s3c64xx_spi_info s5pv210_spi1_pdata = {
 	.fifo_lvl_mask = 0x7f,
 	.rx_lvl_offset = 15,
 	.high_speed = 1,
+	.tx_st_done = 25,
 };
 
 struct platform_device s5pv210_device_spi1 = {

arch/arm/mach-shmobile/board-ag5evm.c

@@ -381,7 +381,7 @@ void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state)
 	gpio_set_value(GPIO_PORT114, state);
 }
 
-static struct sh_mobile_sdhi_info sh_sdhi1_platdata = {
+static struct sh_mobile_sdhi_info sh_sdhi1_info = {
 	.tmio_flags	= TMIO_MMC_WRPROTECT_DISABLE,
 	.tmio_caps	= MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ,
 	.tmio_ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
@@ -413,7 +413,7 @@ static struct platform_device sdhi1_device = {
 	.name		= "sh_mobile_sdhi",
 	.id		= 1,
 	.dev		= {
-		.platform_data	= &sh_sdhi1_platdata,
+		.platform_data	= &sh_sdhi1_info,
 	},
 	.num_resources	= ARRAY_SIZE(sdhi1_resources),
 	.resource	= sdhi1_resources,

arch/arm/mach-shmobile/board-ap4evb.c

@@ -913,7 +913,7 @@ static struct i2c_board_info imx074_info = {
 	I2C_BOARD_INFO("imx074", 0x1a),
 };
 
-struct soc_camera_link imx074_link = {
+static struct soc_camera_link imx074_link = {
 	.bus_id		= 0,
 	.board_info	= &imx074_info,
 	.i2c_adapter_id	= 0,

arch/arm/mach-shmobile/board-mackerel.c

@@ -1287,9 +1287,9 @@ static struct platform_device *mackerel_devices[] __initdata = {
 	&nor_flash_device,
 	&smc911x_device,
 	&lcdc_device,
-	&usbhs0_device,
 	&usb1_host_device,
 	&usbhs1_device,
+	&usbhs0_device,
 	&leds_device,
 	&fsi_device,
 	&fsi_ak4643_device,

arch/arm/mach-ux500/board-mop500-pins.c

@@ -110,10 +110,18 @@ static pin_cfg_t mop500_pins_common[] = {
 	GPIO168_KP_O0,
 
 	/* UART */
-	GPIO0_U0_CTSn	| PIN_INPUT_PULLUP,
-	GPIO1_U0_RTSn	| PIN_OUTPUT_HIGH,
-	GPIO2_U0_RXD	| PIN_INPUT_PULLUP,
-	GPIO3_U0_TXD	| PIN_OUTPUT_HIGH,
+	/* uart-0 pins gpio configuration should be
+	 * kept intact to prevent glitch in tx line
+	 * when tty dev is opened. Later these pins
+	 * are configured to uart mop500_pins_uart0
+	 *
+	 * It will be replaced with uart configuration
+	 * once the issue is solved.
+	 */
+	GPIO0_GPIO	| PIN_INPUT_PULLUP,
+	GPIO1_GPIO	| PIN_OUTPUT_HIGH,
+	GPIO2_GPIO	| PIN_INPUT_PULLUP,
+	GPIO3_GPIO	| PIN_OUTPUT_HIGH,
 
 	GPIO29_U2_RXD	| PIN_INPUT_PULLUP,
 	GPIO30_U2_TXD	| PIN_OUTPUT_HIGH,

arch/arm/mach-ux500/board-mop500.c

@@ -27,18 +27,21 @@
 #include <linux/leds-lp5521.h>
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
+#include <linux/delay.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
 #include <plat/i2c.h>
 #include <plat/ste_dma40.h>
+#include <plat/pincfg.h>
 
 #include <mach/hardware.h>
 #include <mach/setup.h>
 #include <mach/devices.h>
 #include <mach/irqs.h>
 
+#include "pins-db8500.h"
 #include "ste-dma40-db8500.h"
 #include "devices-db8500.h"
 #include "board-mop500.h"
@@ -393,12 +396,63 @@ static struct stedma40_chan_cfg uart2_dma_cfg_tx = {
 };
 #endif
 
+
+static pin_cfg_t mop500_pins_uart0[] = {
+	GPIO0_U0_CTSn   | PIN_INPUT_PULLUP,
+	GPIO1_U0_RTSn   | PIN_OUTPUT_HIGH,
+	GPIO2_U0_RXD    | PIN_INPUT_PULLUP,
+	GPIO3_U0_TXD    | PIN_OUTPUT_HIGH,
+};
+
+#define PRCC_K_SOFTRST_SET      0x18
+#define PRCC_K_SOFTRST_CLEAR    0x1C
+static void ux500_uart0_reset(void)
+{
+	void __iomem *prcc_rst_set, *prcc_rst_clr;
+
+	prcc_rst_set = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE +
+			PRCC_K_SOFTRST_SET);
+	prcc_rst_clr = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE +
+			PRCC_K_SOFTRST_CLEAR);
+
+	/* Activate soft reset PRCC_K_SOFTRST_CLEAR */
+	writel((readl(prcc_rst_clr) | 0x1), prcc_rst_clr);
+	udelay(1);
+
+	/* Release soft reset PRCC_K_SOFTRST_SET */
+	writel((readl(prcc_rst_set) | 0x1), prcc_rst_set);
+	udelay(1);
+}
+
+static void ux500_uart0_init(void)
+{
+	int ret;
+
+	ret = nmk_config_pins(mop500_pins_uart0,
+			ARRAY_SIZE(mop500_pins_uart0));
+	if (ret < 0)
+		pr_err("pl011: uart pins_enable failed\n");
+}
+
+static void ux500_uart0_exit(void)
+{
+	int ret;
+
+	ret = nmk_config_pins_sleep(mop500_pins_uart0,
+			ARRAY_SIZE(mop500_pins_uart0));
+	if (ret < 0)
+		pr_err("pl011: uart pins_disable failed\n");
+}
+
 static struct amba_pl011_data uart0_plat = {
 #ifdef CONFIG_STE_DMA40
 	.dma_filter = stedma40_filter,
 	.dma_rx_param = &uart0_dma_cfg_rx,
 	.dma_tx_param = &uart0_dma_cfg_tx,
 #endif
+	.init = ux500_uart0_init,
+	.exit = ux500_uart0_exit,
+	.reset = ux500_uart0_reset,
 };
 
 static struct amba_pl011_data uart1_plat = {

arch/arm/mach-vt8500/irq.c

@@ -39,9 +39,10 @@
 static void __iomem *ic_regbase;
 static void __iomem *sic_regbase;
 
-static void vt8500_irq_mask(unsigned int irq)
+static void vt8500_irq_mask(struct irq_data *d)
 {
 	void __iomem *base = ic_regbase;
+	unsigned irq = d->irq;
 	u8 edge;
 
 	if (irq >= 64) {
@@ -64,9 +65,10 @@ static void vt8500_irq_mask(unsigned int irq)
 	}
 }
 
-static void vt8500_irq_unmask(unsigned int irq)
+static void vt8500_irq_unmask(struct irq_data *d)
 {
 	void __iomem *base = ic_regbase;
+	unsigned irq = d->irq;
 	u8 dctr;
 
 	if (irq >= 64) {
@@ -78,10 +80,11 @@ static void vt8500_irq_unmask(unsigned int irq)
 	writeb(dctr, base + VT8500_IC_DCTR + irq);
 }
 
-static int vt8500_irq_set_type(unsigned int irq, unsigned int flow_type)
+static int vt8500_irq_set_type(struct irq_data *d, unsigned int flow_type)
 {
 	void __iomem *base = ic_regbase;
-	unsigned int orig_irq = irq;
+	unsigned irq = d->irq;
+	unsigned orig_irq = irq;
 	u8 dctr;
 
 	if (irq >= 64) {
@@ -114,11 +117,11 @@ static int vt8500_irq_set_type(unsigned int irq, unsigned int flow_type)
 }
 
 static struct irq_chip vt8500_irq_chip = {
-	.name      = "vt8500",
-	.ack       = vt8500_irq_mask,
-	.mask      = vt8500_irq_mask,
-	.unmask    = vt8500_irq_unmask,
-	.set_type  = vt8500_irq_set_type,
+	.name = "vt8500",
+	.irq_ack = vt8500_irq_mask,
+	.irq_mask = vt8500_irq_mask,
+	.irq_unmask = vt8500_irq_unmask,
+	.irq_set_type = vt8500_irq_set_type,
 };
 
 void __init vt8500_init_irq(void)

arch/arm/mm/cache-l2x0.c

@@ -120,17 +120,22 @@ static void l2x0_cache_sync(void)
 	spin_unlock_irqrestore(&l2x0_lock, flags);
 }
 
-static void l2x0_flush_all(void)
+static void __l2x0_flush_all(void)
 {
-	unsigned long flags;
-
-	/* clean all ways */
-	spin_lock_irqsave(&l2x0_lock, flags);
 	debug_writel(0x03);
 	writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_CLEAN_INV_WAY);
 	cache_wait_way(l2x0_base + L2X0_CLEAN_INV_WAY, l2x0_way_mask);
 	cache_sync();
 	debug_writel(0x00);
+}
+
+static void l2x0_flush_all(void)
+{
+	unsigned long flags;
+
+	/* clean all ways */
+	spin_lock_irqsave(&l2x0_lock, flags);
+	__l2x0_flush_all();
 	spin_unlock_irqrestore(&l2x0_lock, flags);
 }
 
@@ -266,7 +271,9 @@ static void l2x0_disable(void)
 	unsigned long flags;
 
 	spin_lock_irqsave(&l2x0_lock, flags);
-	writel(0, l2x0_base + L2X0_CTRL);
+	__l2x0_flush_all();
+	writel_relaxed(0, l2x0_base + L2X0_CTRL);
+	dsb();
 	spin_unlock_irqrestore(&l2x0_lock, flags);
 }
 

arch/arm/mm/mmu.c

@@ -759,7 +759,7 @@ early_param("vmalloc", early_vmalloc);
 
 static phys_addr_t lowmem_limit __initdata = 0;
 
-static void __init sanity_check_meminfo(void)
+void __init sanity_check_meminfo(void)
 {
 	int i, j, highmem = 0;
 
@@ -1032,8 +1032,9 @@ void __init paging_init(struct machine_desc *mdesc)
 {
 	void *zero_page;
 
+	memblock_set_current_limit(lowmem_limit);
+
 	build_mem_type_table();
-	sanity_check_meminfo();
 	prepare_page_table();
 	map_lowmem();
 	devicemaps_init(mdesc);

arch/arm/mm/nommu.c

@@ -27,6 +27,10 @@ void __init arm_mm_memblock_reserve(void)
 	memblock_reserve(CONFIG_VECTORS_BASE, PAGE_SIZE);
 }
 
+void __init sanity_check_meminfo(void)
+{
+}
+
 /*
  * paging_init() sets up the page tables, initialises the zone memory
  * maps, and sets up the zero page, bad page and bad page tables.

arch/arm/mm/proc-v7.S

@@ -210,19 +210,21 @@ cpu_v7_name:
 
 /* Suspend/resume support: derived from arch/arm/mach-s5pv210/sleep.S */
 .globl	cpu_v7_suspend_size
-.equ	cpu_v7_suspend_size, 4 * 8
+.equ	cpu_v7_suspend_size, 4 * 9
 #ifdef CONFIG_PM_SLEEP
 ENTRY(cpu_v7_do_suspend)
 	stmfd	sp!, {r4 - r11, lr}
 	mrc	p15, 0, r4, c13, c0, 0	@ FCSE/PID
 	mrc	p15, 0, r5, c13, c0, 1	@ Context ID
+	mrc	p15, 0, r6, c13, c0, 3	@ User r/o thread ID
+	stmia	r0!, {r4 - r6}
 	mrc	p15, 0, r6, c3, c0, 0	@ Domain ID
 	mrc	p15, 0, r7, c2, c0, 0	@ TTB 0
 	mrc	p15, 0, r8, c2, c0, 1	@ TTB 1
 	mrc	p15, 0, r9, c1, c0, 0	@ Control register
 	mrc	p15, 0, r10, c1, c0, 1	@ Auxiliary control register
 	mrc	p15, 0, r11, c1, c0, 2	@ Co-processor access control
-	stmia	r0, {r4 - r11}
+	stmia	r0, {r6 - r11}
 	ldmfd	sp!, {r4 - r11, pc}
 ENDPROC(cpu_v7_do_suspend)
 
@@ -230,9 +232,11 @@ ENTRY(cpu_v7_do_resume)
 	mov	ip, #0
 	mcr	p15, 0, ip, c8, c7, 0	@ invalidate TLBs
 	mcr	p15, 0, ip, c7, c5, 0	@ invalidate I cache
-	ldmia	r0, {r4 - r11}
+	ldmia	r0!, {r4 - r6}
 	mcr	p15, 0, r4, c13, c0, 0	@ FCSE/PID
 	mcr	p15, 0, r5, c13, c0, 1	@ Context ID
+	mcr	p15, 0, r6, c13, c0, 3	@ User r/o thread ID
+	ldmia	r0, {r6 - r11}
 	mcr	p15, 0, r6, c3, c0, 0	@ Domain ID
 	mcr	p15, 0, r7, c2, c0, 0	@ TTB 0
 	mcr	p15, 0, r8, c2, c0, 1	@ TTB 1
@@ -418,9 +422,9 @@ ENTRY(v7_processor_functions)
 	.word	cpu_v7_dcache_clean_area
 	.word	cpu_v7_switch_mm
 	.word	cpu_v7_set_pte_ext
-	.word	0
-	.word	0
-	.word	0
+	.word	cpu_v7_suspend_size
+	.word	cpu_v7_do_suspend
+	.word	cpu_v7_do_resume
 	.size	v7_processor_functions, . - v7_processor_functions
 
 	.section ".rodata"

arch/arm/plat-iop/cp6.c

@@ -18,6 +18,7 @@
  */
 #include <linux/init.h>
 #include <asm/traps.h>
+#include <asm/ptrace.h>
 
 static int cp6_trap(struct pt_regs *regs, unsigned int instr)
 {

arch/arm/plat-s3c24xx/dma.c

@@ -1027,17 +1027,13 @@ int s3c2410_dma_config(unsigned int channel,
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 	unsigned int dcon;
 
-	pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n",
-		 __func__, channel, xferunit, dcon);
+	pr_debug("%s: chan=%d, xfer_unit=%d\n", __func__, channel, xferunit);
 
 	if (chan == NULL)
 		return -EINVAL;
 
-	pr_debug("%s: Initial dcon is %08x\n", __func__, dcon);
-
 	dcon = chan->dcon & dma_sel.dcon_mask;
-
-	pr_debug("%s: New dcon is %08x\n", __func__, dcon);
+	pr_debug("%s: dcon is %08x\n", __func__, dcon);
 
 	switch (chan->req_ch) {
 	case DMACH_I2S_IN:
@@ -1235,7 +1231,7 @@ static void s3c2410_dma_resume_chan(struct s3c2410_dma_chan *cp)
 	/* restore channel's hardware configuration */
 
 	if (!cp->in_use)
-		return 0;
+		return;
 
 	printk(KERN_INFO "dma%d: restoring configuration\n", cp->number);
 
@@ -1246,8 +1242,6 @@ static void s3c2410_dma_resume_chan(struct s3c2410_dma_chan *cp)
 
 	if (cp->map != NULL)
 		dma_sel.select(cp, cp->map);
-
-	return 0;
 }
 
 static void s3c2410_dma_resume(void)

arch/arm/plat-s5p/s5p-time.c

@@ -370,11 +370,11 @@ static void __init s5p_clocksource_init(void)
 
 	clock_rate = clk_get_rate(tin_source);
 
-	init_sched_clock(&cd, s5p_update_sched_clock, 32, clock_rate);
-
 	s5p_time_setup(timer_source.source_id, TCNT_MAX);
 	s5p_time_start(timer_source.source_id, PERIODIC);
 
+	init_sched_clock(&cd, s5p_update_sched_clock, 32, clock_rate);
+
 	if (clocksource_register_hz(&time_clocksource, clock_rate))
 		panic("%s: can't register clocksource\n", time_clocksource.name);
 }

arch/arm/plat-samsung/include/plat/devs.h

@@ -12,6 +12,10 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
 */
+
+#ifndef __PLAT_DEVS_H
+#define __PLAT_DEVS_H __FILE__
+
 #include <linux/platform_device.h>
 
 struct s3c24xx_uart_resources {
@@ -159,3 +163,5 @@ extern struct platform_device s3c_device_ac97;
  */
 extern void *s3c_set_platdata(void *pd, size_t pdsize,
 			      struct platform_device *pdev);
+
+#endif /* __PLAT_DEVS_H */

arch/arm/plat-samsung/include/plat/regs-serial.h

@@ -224,6 +224,8 @@
 #define S5PV210_UFSTAT_RXMASK	(255<<0)
 #define S5PV210_UFSTAT_RXSHIFT	(0)
 
+#define NO_NEED_CHECK_CLKSRC	1
+
 #ifndef __ASSEMBLY__
 
 /* struct s3c24xx_uart_clksrc

arch/arm/plat-samsung/include/plat/s3c64xx-spi.h

@@ -39,6 +39,7 @@ struct s3c64xx_spi_csinfo {
  * @fifo_lvl_mask: All tx fifo_lvl fields start at offset-6
  * @rx_lvl_offset: Depends on tx fifo_lvl field and bus number
  * @high_speed: If the controller supports HIGH_SPEED_EN bit
+ * @tx_st_done: Depends on tx fifo_lvl field
  */
 struct s3c64xx_spi_info {
 	int src_clk_nr;
@@ -53,6 +54,7 @@ struct s3c64xx_spi_info {
 	int fifo_lvl_mask;
 	int rx_lvl_offset;
 	int high_speed;
+	int tx_st_done;
 };
 
 /**

arch/m32r/include/asm/mmzone.h

@@ -14,12 +14,6 @@ extern struct pglist_data *node_data[];
 #define NODE_DATA(nid)		(node_data[nid])
 
 #define node_localnr(pfn, nid)	((pfn) - NODE_DATA(nid)->node_start_pfn)
-#define node_start_pfn(nid)	(NODE_DATA(nid)->node_start_pfn)
-#define node_end_pfn(nid)						\
-({									\
-	pg_data_t *__pgdat = NODE_DATA(nid);				\
-	__pgdat->node_start_pfn + __pgdat->node_spanned_pages - 1;	\
-})
 
 #define pmd_page(pmd)		(pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT))
 /*
@@ -44,7 +38,7 @@ static __inline__ int pfn_to_nid(unsigned long pfn)
 	int node;
 
 	for (node = 0 ; node < MAX_NUMNODES ; node++)
-		if (pfn >= node_start_pfn(node) && pfn <= node_end_pfn(node))
+		if (pfn >= node_start_pfn(node) && pfn < node_end_pfn(node))
 			break;
 
 	return node;

arch/mn10300/include/asm/uaccess.h

@@ -15,6 +15,7 @@
  * User space memory access functions
  */
 #include <linux/thread_info.h>
+#include <linux/kernel.h>
 #include <asm/page.h>
 #include <asm/errno.h>
 

arch/parisc/include/asm/mmzone.h

@@ -14,13 +14,6 @@ extern struct node_map_data node_data[];
 
 #define NODE_DATA(nid)          (&node_data[nid].pg_data)
 
-#define node_start_pfn(nid)	(NODE_DATA(nid)->node_start_pfn)
-#define node_end_pfn(nid)						\
-({									\
-	pg_data_t *__pgdat = NODE_DATA(nid);				\
-	__pgdat->node_start_pfn + __pgdat->node_spanned_pages;		\
-})
-
 /* We have these possible memory map layouts:
  * Astro: 0-3.75, 67.75-68, 4-64
  * zx1: 0-1, 257-260, 4-256

arch/powerpc/boot/dts/p1022ds.dts

@@ -209,8 +209,10 @@
 			wm8776:codec@1a {
 				compatible = "wlf,wm8776";
 				reg = <0x1a>;
-				/* MCLK source is a stand-alone oscillator */
-				clock-frequency = <12288000>;
+				/*
+				 * clock-frequency will be set by U-Boot if
+				 * the clock is enabled.
+				 */
 			};
 		};
 
@@ -280,7 +282,8 @@
 			codec-handle = <&wm8776>;
 			fsl,playback-dma = <&dma00>;
 			fsl,capture-dma = <&dma01>;
-			fsl,fifo-depth = <16>;
+			fsl,fifo-depth = <15>;
+			fsl,ssi-asynchronous;
 		};
 
 		dma@c300 {

arch/powerpc/configs/pseries_defconfig

@@ -148,7 +148,6 @@ CONFIG_SCSI_SAS_ATTRS=m
 CONFIG_SCSI_CXGB3_ISCSI=m
 CONFIG_SCSI_CXGB4_ISCSI=m
 CONFIG_SCSI_BNX2_ISCSI=m
-CONFIG_SCSI_BNX2_ISCSI=m
 CONFIG_BE2ISCSI=m
 CONFIG_SCSI_IBMVSCSI=y
 CONFIG_SCSI_IBMVFC=m

arch/powerpc/include/asm/mmzone.h

@@ -38,13 +38,6 @@ u64 memory_hotplug_max(void);
 #define memory_hotplug_max() memblock_end_of_DRAM()
 #endif
 
-/*
- * Following are macros that each numa implmentation must define.
- */
-
-#define node_start_pfn(nid)	(NODE_DATA(nid)->node_start_pfn)
-#define node_end_pfn(nid)	(NODE_DATA(nid)->node_end_pfn)
-
 #else
 #define memory_hotplug_max() memblock_end_of_DRAM()
 #endif /* CONFIG_NEED_MULTIPLE_NODES */

arch/powerpc/kernel/rtas-rtc.c

@@ -4,6 +4,7 @@
 #include <linux/init.h>
 #include <linux/rtc.h>
 #include <linux/delay.h>
+#include <linux/ratelimit.h>
 #include <asm/prom.h>
 #include <asm/rtas.h>
 #include <asm/time.h>
@@ -29,9 +30,10 @@ unsigned long __init rtas_get_boot_time(void)
 		}
 	} while (wait_time && (get_tb() < max_wait_tb));
 
-	if (error != 0 && printk_ratelimit()) {
-		printk(KERN_WARNING "error: reading the clock failed (%d)\n",
-			error);
+	if (error != 0) {
+		printk_ratelimited(KERN_WARNING
+				   "error: reading the clock failed (%d)\n",
+				   error);
 		return 0;
 	}
 
@@ -55,19 +57,21 @@ void rtas_get_rtc_time(struct rtc_time *rtc_tm)
 
 		wait_time = rtas_busy_delay_time(error);
 		if (wait_time) {
-			if (in_interrupt() && printk_ratelimit()) {
+			if (in_interrupt()) {
 				memset(rtc_tm, 0, sizeof(struct rtc_time));
-				printk(KERN_WARNING "error: reading clock"
-				       " would delay interrupt\n");
+				printk_ratelimited(KERN_WARNING
+						   "error: reading clock "
+						   "would delay interrupt\n");
 				return;	/* delay not allowed */
 			}
 			msleep(wait_time);
 		}
 	} while (wait_time && (get_tb() < max_wait_tb));
 
-        if (error != 0 && printk_ratelimit()) {
-                printk(KERN_WARNING "error: reading the clock failed (%d)\n",
-		       error);
+	if (error != 0) {
+		printk_ratelimited(KERN_WARNING
+				   "error: reading the clock failed (%d)\n",
+				   error);
 		return;
         }
 
@@ -99,9 +103,10 @@ int rtas_set_rtc_time(struct rtc_time *tm)
 		}
 	} while (wait_time && (get_tb() < max_wait_tb));
 
-        if (error != 0 && printk_ratelimit())
-                printk(KERN_WARNING "error: setting the clock failed (%d)\n",
-		       error);
+	if (error != 0)
+		printk_ratelimited(KERN_WARNING
+				   "error: setting the clock failed (%d)\n",
+				   error);
 
         return 0;
 }

arch/powerpc/kernel/signal_32.c

@@ -25,6 +25,7 @@
 #include <linux/errno.h>
 #include <linux/elf.h>
 #include <linux/ptrace.h>
+#include <linux/ratelimit.h>
 #ifdef CONFIG_PPC64
 #include <linux/syscalls.h>
 #include <linux/compat.h>
@@ -892,11 +893,12 @@ badframe:
 	printk("badframe in handle_rt_signal, regs=%p frame=%p newsp=%lx\n",
 	       regs, frame, newsp);
 #endif
-	if (show_unhandled_signals && printk_ratelimit())
-		printk(KERN_INFO "%s[%d]: bad frame in handle_rt_signal32: "
-			"%p nip %08lx lr %08lx\n",
-			current->comm, current->pid,
-			addr, regs->nip, regs->link);
+	if (show_unhandled_signals)
+		printk_ratelimited(KERN_INFO
+				   "%s[%d]: bad frame in handle_rt_signal32: "
+				   "%p nip %08lx lr %08lx\n",
+				   current->comm, current->pid,
+				   addr, regs->nip, regs->link);
 
 	force_sigsegv(sig, current);
 	return 0;
@@ -1058,11 +1060,12 @@ long sys_rt_sigreturn(int r3, int r4, int r5, int r6, int r7, int r8,
 	return 0;
 
  bad:
-	if (show_unhandled_signals && printk_ratelimit())
-		printk(KERN_INFO "%s[%d]: bad frame in sys_rt_sigreturn: "
-			"%p nip %08lx lr %08lx\n",
-			current->comm, current->pid,
-			rt_sf, regs->nip, regs->link);
+	if (show_unhandled_signals)
+		printk_ratelimited(KERN_INFO
+				   "%s[%d]: bad frame in sys_rt_sigreturn: "
+				   "%p nip %08lx lr %08lx\n",
+				   current->comm, current->pid,
+				   rt_sf, regs->nip, regs->link);
 
 	force_sig(SIGSEGV, current);
 	return 0;
@@ -1149,12 +1152,12 @@ int sys_debug_setcontext(struct ucontext __user *ctx,
 	 * We kill the task with a SIGSEGV in this situation.
 	 */
 	if (do_setcontext(ctx, regs, 1)) {
-		if (show_unhandled_signals && printk_ratelimit())
-			printk(KERN_INFO "%s[%d]: bad frame in "
-				"sys_debug_setcontext: %p nip %08lx "
-				"lr %08lx\n",
-				current->comm, current->pid,
-				ctx, regs->nip, regs->link);
+		if (show_unhandled_signals)
+			printk_ratelimited(KERN_INFO "%s[%d]: bad frame in "
+					   "sys_debug_setcontext: %p nip %08lx "
+					   "lr %08lx\n",
+					   current->comm, current->pid,
+					   ctx, regs->nip, regs->link);
 
 		force_sig(SIGSEGV, current);
 		goto out;
@@ -1236,11 +1239,12 @@ badframe:
 	printk("badframe in handle_signal, regs=%p frame=%p newsp=%lx\n",
 	       regs, frame, newsp);
 #endif
-	if (show_unhandled_signals && printk_ratelimit())
-		printk(KERN_INFO "%s[%d]: bad frame in handle_signal32: "
-			"%p nip %08lx lr %08lx\n",
-			current->comm, current->pid,
-			frame, regs->nip, regs->link);
+	if (show_unhandled_signals)
+		printk_ratelimited(KERN_INFO
+				   "%s[%d]: bad frame in handle_signal32: "
+				   "%p nip %08lx lr %08lx\n",
+				   current->comm, current->pid,
+				   frame, regs->nip, regs->link);
 
 	force_sigsegv(sig, current);
 	return 0;
@@ -1288,11 +1292,12 @@ long sys_sigreturn(int r3, int r4, int r5, int r6, int r7, int r8,
 	return 0;
 
 badframe:
-	if (show_unhandled_signals && printk_ratelimit())
-		printk(KERN_INFO "%s[%d]: bad frame in sys_sigreturn: "
-			"%p nip %08lx lr %08lx\n",
-			current->comm, current->pid,
-			addr, regs->nip, regs->link);
+	if (show_unhandled_signals)
+		printk_ratelimited(KERN_INFO
+				   "%s[%d]: bad frame in sys_sigreturn: "
+				   "%p nip %08lx lr %08lx\n",
+				   current->comm, current->pid,
+				   addr, regs->nip, regs->link);
 
 	force_sig(SIGSEGV, current);
 	return 0;

arch/powerpc/kernel/signal_64.c

@@ -24,6 +24,7 @@
 #include <linux/elf.h>
 #include <linux/ptrace.h>
 #include <linux/module.h>
+#include <linux/ratelimit.h>
 
 #include <asm/sigcontext.h>
 #include <asm/ucontext.h>
@@ -380,10 +381,10 @@ badframe:
 	printk("badframe in sys_rt_sigreturn, regs=%p uc=%p &uc->uc_mcontext=%p\n",
 	       regs, uc, &uc->uc_mcontext);
 #endif
-	if (show_unhandled_signals && printk_ratelimit())
-		printk(regs->msr & MSR_64BIT ? fmt64 : fmt32,
-			current->comm, current->pid, "rt_sigreturn",
-			(long)uc, regs->nip, regs->link);
+	if (show_unhandled_signals)
+		printk_ratelimited(regs->msr & MSR_64BIT ? fmt64 : fmt32,
+				   current->comm, current->pid, "rt_sigreturn",
+				   (long)uc, regs->nip, regs->link);
 
 	force_sig(SIGSEGV, current);
 	return 0;
@@ -468,10 +469,10 @@ badframe:
 	printk("badframe in setup_rt_frame, regs=%p frame=%p newsp=%lx\n",
 	       regs, frame, newsp);
 #endif
-	if (show_unhandled_signals && printk_ratelimit())
-		printk(regs->msr & MSR_64BIT ? fmt64 : fmt32,
-			current->comm, current->pid, "setup_rt_frame",
-			(long)frame, regs->nip, regs->link);
+	if (show_unhandled_signals)
+		printk_ratelimited(regs->msr & MSR_64BIT ? fmt64 : fmt32,
+				   current->comm, current->pid, "setup_rt_frame",
+				   (long)frame, regs->nip, regs->link);
 
 	force_sigsegv(signr, current);
 	return 0;

arch/powerpc/kernel/traps.c

@@ -34,6 +34,7 @@
 #include <linux/bug.h>
 #include <linux/kdebug.h>
 #include <linux/debugfs.h>
+#include <linux/ratelimit.h>
 
 #include <asm/emulated_ops.h>
 #include <asm/pgtable.h>
@@ -197,12 +198,11 @@ void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr)
 		if (die("Exception in kernel mode", regs, signr))
 			return;
 	} else if (show_unhandled_signals &&
-		    unhandled_signal(current, signr) &&
-		    printk_ratelimit()) {
-			printk(regs->msr & MSR_64BIT ? fmt64 : fmt32,
-				current->comm, current->pid, signr,
-				addr, regs->nip, regs->link, code);
-		}
+		   unhandled_signal(current, signr)) {
+		printk_ratelimited(regs->msr & MSR_64BIT ? fmt64 : fmt32,
+				   current->comm, current->pid, signr,
+				   addr, regs->nip, regs->link, code);
+	}
 
 	memset(&info, 0, sizeof(info));
 	info.si_signo = signr;
@@ -425,7 +425,7 @@ int machine_check_e500mc(struct pt_regs *regs)
 	unsigned long reason = mcsr;
 	int recoverable = 1;
 
-	if (reason & MCSR_BUS_RBERR) {
+	if (reason & MCSR_LD) {
 		recoverable = fsl_rio_mcheck_exception(regs);
 		if (recoverable == 1)
 			goto silent_out;
@@ -1342,9 +1342,8 @@ void altivec_assist_exception(struct pt_regs *regs)
 	} else {
 		/* didn't recognize the instruction */
 		/* XXX quick hack for now: set the non-Java bit in the VSCR */
-		if (printk_ratelimit())
-			printk(KERN_ERR "Unrecognized altivec instruction "
-			       "in %s at %lx\n", current->comm, regs->nip);
+		printk_ratelimited(KERN_ERR "Unrecognized altivec instruction "
+				   "in %s at %lx\n", current->comm, regs->nip);
 		current->thread.vscr.u[3] |= 0x10000;
 	}
 }
@@ -1548,9 +1547,8 @@ u32 ppc_warn_emulated;
 
 void ppc_warn_emulated_print(const char *type)
 {
-	if (printk_ratelimit())
-		pr_warning("%s used emulated %s instruction\n", current->comm,
-			   type);
+	pr_warn_ratelimited("%s used emulated %s instruction\n", current->comm,
+			    type);
 }
 
 static int __init ppc_warn_emulated_init(void)

arch/powerpc/mm/fault.c

@@ -31,6 +31,7 @@
 #include <linux/kdebug.h>
 #include <linux/perf_event.h>
 #include <linux/magic.h>
+#include <linux/ratelimit.h>
 
 #include <asm/firmware.h>
 #include <asm/page.h>
@@ -346,11 +347,10 @@ bad_area_nosemaphore:
 		return 0;
 	}
 
-	if (is_exec && (error_code & DSISR_PROTFAULT)
-	    && printk_ratelimit())
-		printk(KERN_CRIT "kernel tried to execute NX-protected"
-		       " page (%lx) - exploit attempt? (uid: %d)\n",
-		       address, current_uid());
+	if (is_exec && (error_code & DSISR_PROTFAULT))
+		printk_ratelimited(KERN_CRIT "kernel tried to execute NX-protected"
+				   " page (%lx) - exploit attempt? (uid: %d)\n",
+				   address, current_uid());
 
 	return SIGSEGV;
 

arch/powerpc/sysdev/fsl_rio.c

@@ -283,23 +283,24 @@ static void __iomem *rio_regs_win;
 #ifdef CONFIG_E500
 int fsl_rio_mcheck_exception(struct pt_regs *regs)
 {
-	const struct exception_table_entry *entry = NULL;
-	unsigned long reason = mfspr(SPRN_MCSR);
-
-	if (reason & MCSR_BUS_RBERR) {
-		reason = in_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR));
-		if (reason & (RIO_LTLEDCSR_IER | RIO_LTLEDCSR_PRT)) {
-			/* Check if we are prepared to handle this fault */
-			entry = search_exception_tables(regs->nip);
-			if (entry) {
-				pr_debug("RIO: %s - MC Exception handled\n",
-					 __func__);
-				out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR),
-					 0);
-				regs->msr |= MSR_RI;
-				regs->nip = entry->fixup;
-				return 1;
-			}
+	const struct exception_table_entry *entry;
+	unsigned long reason;
+
+	if (!rio_regs_win)
+		return 0;
+
+	reason = in_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR));
+	if (reason & (RIO_LTLEDCSR_IER | RIO_LTLEDCSR_PRT)) {
+		/* Check if we are prepared to handle this fault */
+		entry = search_exception_tables(regs->nip);
+		if (entry) {
+			pr_debug("RIO: %s - MC Exception handled\n",
+				 __func__);
+			out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR),
+				 0);
+			regs->msr |= MSR_RI;
+			regs->nip = entry->fixup;
+			return 1;
 		}
 	}
 

arch/powerpc/sysdev/mpic.c

@@ -29,6 +29,7 @@
 #include <linux/pci.h>
 #include <linux/slab.h>
 #include <linux/syscore_ops.h>
+#include <linux/ratelimit.h>
 
 #include <asm/ptrace.h>
 #include <asm/signal.h>
@@ -1648,9 +1649,8 @@ static unsigned int _mpic_get_one_irq(struct mpic *mpic, int reg)
 		return NO_IRQ;
 	}
 	if (unlikely(mpic->protected && test_bit(src, mpic->protected))) {
-		if (printk_ratelimit())
-			printk(KERN_WARNING "%s: Got protected source %d !\n",
-			       mpic->name, (int)src);
+		printk_ratelimited(KERN_WARNING "%s: Got protected source %d !\n",
+				   mpic->name, (int)src);
 		mpic_eoi(mpic);
 		return NO_IRQ;
 	}
@@ -1688,9 +1688,8 @@ unsigned int mpic_get_coreint_irq(void)
 		return NO_IRQ;
 	}
 	if (unlikely(mpic->protected && test_bit(src, mpic->protected))) {
-		if (printk_ratelimit())
-			printk(KERN_WARNING "%s: Got protected source %d !\n",
-			       mpic->name, (int)src);
+		printk_ratelimited(KERN_WARNING "%s: Got protected source %d !\n",
+				   mpic->name, (int)src);
 		return NO_IRQ;
 	}
 

arch/s390/Kconfig

@@ -579,6 +579,7 @@ config S390_GUEST
 	def_bool y
 	prompt "s390 guest support for KVM (EXPERIMENTAL)"
 	depends on 64BIT && EXPERIMENTAL
+	select VIRTUALIZATION
 	select VIRTIO
 	select VIRTIO_RING
 	select VIRTIO_CONSOLE

arch/s390/kernel/smp.c

@@ -262,7 +262,7 @@ void smp_ctl_set_bit(int cr, int bit)
 
 	memset(&parms.orvals, 0, sizeof(parms.orvals));
 	memset(&parms.andvals, 0xff, sizeof(parms.andvals));
-	parms.orvals[cr] = 1 << bit;
+	parms.orvals[cr] = 1UL << bit;
 	on_each_cpu(smp_ctl_bit_callback, &parms, 1);
 }
 EXPORT_SYMBOL(smp_ctl_set_bit);
@@ -276,7 +276,7 @@ void smp_ctl_clear_bit(int cr, int bit)
 
 	memset(&parms.orvals, 0, sizeof(parms.orvals));
 	memset(&parms.andvals, 0xff, sizeof(parms.andvals));
-	parms.andvals[cr] = ~(1L << bit);
+	parms.andvals[cr] = ~(1UL << bit);
 	on_each_cpu(smp_ctl_bit_callback, &parms, 1);
 }
 EXPORT_SYMBOL(smp_ctl_clear_bit);

arch/s390/oprofile/init.c

@@ -25,7 +25,7 @@ extern void s390_backtrace(struct pt_regs * const regs, unsigned int depth);
 
 #include "hwsampler.h"
 
-#define DEFAULT_INTERVAL	4096
+#define DEFAULT_INTERVAL	4127518
 
 #define DEFAULT_SDBT_BLOCKS	1
 #define DEFAULT_SDB_BLOCKS	511
@@ -151,6 +151,12 @@ static int oprofile_hwsampler_init(struct oprofile_operations *ops)
 	if (oprofile_max_interval == 0)
 		return -ENODEV;
 
+	/* The initial value should be sane */
+	if (oprofile_hw_interval < oprofile_min_interval)
+		oprofile_hw_interval = oprofile_min_interval;
+	if (oprofile_hw_interval > oprofile_max_interval)
+		oprofile_hw_interval = oprofile_max_interval;
+
 	if (oprofile_timer_init(ops))
 		return -ENODEV;
 

arch/sh/Kconfig

@@ -348,6 +348,7 @@ config CPU_SUBTYPE_SH7720
 	select SYS_SUPPORTS_CMT
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select USB_ARCH_HAS_OHCI
+	select USB_OHCI_SH if USB_OHCI_HCD
 	help
 	  Select SH7720 if you have a SH3-DSP SH7720 CPU.
 
@@ -357,6 +358,7 @@ config CPU_SUBTYPE_SH7721
 	select CPU_HAS_DSP
 	select SYS_SUPPORTS_CMT
 	select USB_ARCH_HAS_OHCI
+	select USB_OHCI_SH if USB_OHCI_HCD
 	help
 	  Select SH7721 if you have a SH3-DSP SH7721 CPU.
 
@@ -440,6 +442,7 @@ config CPU_SUBTYPE_SH7763
 	bool "Support SH7763 processor"
 	select CPU_SH4A
 	select USB_ARCH_HAS_OHCI
+	select USB_OHCI_SH if USB_OHCI_HCD
 	help
 	  Select SH7763 if you have a SH4A SH7763(R5S77631) CPU.
 
@@ -467,7 +470,9 @@ config CPU_SUBTYPE_SH7786
 	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select USB_ARCH_HAS_OHCI
+	select USB_OHCI_SH if USB_OHCI_HCD
 	select USB_ARCH_HAS_EHCI
+	select USB_EHCI_SH if USB_EHCI_HCD
 
 config CPU_SUBTYPE_SHX3
 	bool "Support SH-X3 processor"

arch/sh/configs/sh7757lcr_defconfig

@@ -9,7 +9,6 @@ CONFIG_TASK_XACCT=y
 CONFIG_TASK_IO_ACCOUNTING=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS_ALL=y
 CONFIG_SLAB=y
@@ -39,8 +38,6 @@ CONFIG_IPV6=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_M25P80=y
@@ -56,18 +53,19 @@ CONFIG_SH_ETH=y
 # CONFIG_KEYBOARD_ATKBD is not set
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_SH_SCI=y
 CONFIG_SERIAL_SH_SCI_NR_UARTS=3
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_SPI=y
 CONFIG_SPI_SH=y
 # CONFIG_HWMON is not set
-CONFIG_MFD_SH_MOBILE_SDHI=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_SH=y
 CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_SH=y
 CONFIG_USB_STORAGE=y
 CONFIG_MMC=y
 CONFIG_MMC_SDHI=y

arch/sh/include/asm/mmzone.h

@@ -9,10 +9,6 @@
 extern struct pglist_data *node_data[];
 #define NODE_DATA(nid)		(node_data[nid])
 
-#define node_start_pfn(nid)	(NODE_DATA(nid)->node_start_pfn)
-#define node_end_pfn(nid)	(NODE_DATA(nid)->node_start_pfn + \
-				 NODE_DATA(nid)->node_spanned_pages)
-
 static inline int pfn_to_nid(unsigned long pfn)
 {
 	int nid;

arch/sh/kernel/cpu/sh4a/setup-sh7757.c

@@ -183,7 +183,7 @@ static const struct sh_dmae_slave_config sh7757_dmae1_slaves[] = {
 	{
 		.slave_id	= SHDMA_SLAVE_SCIF2_RX,
 		.addr		= 0x1f4b0014,
-		.chcr		= SM_INC | 0x800 | 0x40000000 |
+		.chcr		= DM_INC | 0x800 | 0x40000000 |
 				  TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0x22,
 	},
@@ -197,7 +197,7 @@ static const struct sh_dmae_slave_config sh7757_dmae1_slaves[] = {
 	{
 		.slave_id	= SHDMA_SLAVE_SCIF3_RX,
 		.addr		= 0x1f4c0014,
-		.chcr		= SM_INC | 0x800 | 0x40000000 |
+		.chcr		= DM_INC | 0x800 | 0x40000000 |
 				  TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0x2a,
 	},
@@ -211,7 +211,7 @@ static const struct sh_dmae_slave_config sh7757_dmae1_slaves[] = {
 	{
 		.slave_id	= SHDMA_SLAVE_SCIF4_RX,
 		.addr		= 0x1f4d0014,
-		.chcr		= SM_INC | 0x800 | 0x40000000 |
+		.chcr		= DM_INC | 0x800 | 0x40000000 |
 				  TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0x42,
 	},
@@ -228,7 +228,7 @@ static const struct sh_dmae_slave_config sh7757_dmae2_slaves[] = {
 	{
 		.slave_id	= SHDMA_SLAVE_RIIC0_RX,
 		.addr		= 0x1e500013,
-		.chcr		= SM_INC | 0x800 | 0x40000000 |
+		.chcr		= DM_INC | 0x800 | 0x40000000 |
 				  TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0x22,
 	},
@@ -242,7 +242,7 @@ static const struct sh_dmae_slave_config sh7757_dmae2_slaves[] = {
 	{
 		.slave_id	= SHDMA_SLAVE_RIIC1_RX,
 		.addr		= 0x1e510013,
-		.chcr		= SM_INC | 0x800 | 0x40000000 |
+		.chcr		= DM_INC | 0x800 | 0x40000000 |
 				  TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0x2a,
 	},
@@ -256,7 +256,7 @@ static const struct sh_dmae_slave_config sh7757_dmae2_slaves[] = {
 	{
 		.slave_id	= SHDMA_SLAVE_RIIC2_RX,
 		.addr		= 0x1e520013,
-		.chcr		= SM_INC | 0x800 | 0x40000000 |
+		.chcr		= DM_INC | 0x800 | 0x40000000 |
 				  TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0xa2,
 	},
@@ -265,12 +265,12 @@ static const struct sh_dmae_slave_config sh7757_dmae2_slaves[] = {
 		.addr		= 0x1e530012,
 		.chcr		= SM_INC | 0x800 | 0x40000000 |
 				  TS_INDEX2VAL(XMIT_SZ_8BIT),
-		.mid_rid	= 0xab,
+		.mid_rid	= 0xa9,
 	},
 	{
 		.slave_id	= SHDMA_SLAVE_RIIC3_RX,
 		.addr		= 0x1e530013,
-		.chcr		= SM_INC | 0x800 | 0x40000000 |
+		.chcr		= DM_INC | 0x800 | 0x40000000 |
 				  TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0xaf,
 	},
@@ -279,14 +279,14 @@ static const struct sh_dmae_slave_config sh7757_dmae2_slaves[] = {
 		.addr		= 0x1e540012,
 		.chcr		= SM_INC | 0x800 | 0x40000000 |
 				  TS_INDEX2VAL(XMIT_SZ_8BIT),
-		.mid_rid	= 0xc1,
+		.mid_rid	= 0xc5,
 	},
 	{
 		.slave_id	= SHDMA_SLAVE_RIIC4_RX,
 		.addr		= 0x1e540013,
-		.chcr		= SM_INC | 0x800 | 0x40000000 |
+		.chcr		= DM_INC | 0x800 | 0x40000000 |
 				  TS_INDEX2VAL(XMIT_SZ_8BIT),
-		.mid_rid	= 0xc2,
+		.mid_rid	= 0xc6,
 	},
 };
 
@@ -301,7 +301,7 @@ static const struct sh_dmae_slave_config sh7757_dmae3_slaves[] = {
 	{
 		.slave_id	= SHDMA_SLAVE_RIIC5_RX,
 		.addr		= 0x1e550013,
-		.chcr		= SM_INC | 0x800 | 0x40000000 |
+		.chcr		= DM_INC | 0x800 | 0x40000000 |
 				  TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0x22,
 	},
@@ -315,7 +315,7 @@ static const struct sh_dmae_slave_config sh7757_dmae3_slaves[] = {
 	{
 		.slave_id	= SHDMA_SLAVE_RIIC6_RX,
 		.addr		= 0x1e560013,
-		.chcr		= SM_INC | 0x800 | 0x40000000 |
+		.chcr		= DM_INC | 0x800 | 0x40000000 |
 				  TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0x2a,
 	},
@@ -329,7 +329,7 @@ static const struct sh_dmae_slave_config sh7757_dmae3_slaves[] = {
 	{
 		.slave_id	= SHDMA_SLAVE_RIIC7_RX,
 		.addr		= 0x1e570013,
-		.chcr		= SM_INC | 0x800 | 0x40000000 |
+		.chcr		= DM_INC | 0x800 | 0x40000000 |
 				  TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0x42,
 	},
@@ -343,7 +343,7 @@ static const struct sh_dmae_slave_config sh7757_dmae3_slaves[] = {
 	{
 		.slave_id	= SHDMA_SLAVE_RIIC8_RX,
 		.addr		= 0x1e580013,
-		.chcr		= SM_INC | 0x800 | 0x40000000 |
+		.chcr		= DM_INC | 0x800 | 0x40000000 |
 				  TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0x46,
 	},
@@ -357,7 +357,7 @@ static const struct sh_dmae_slave_config sh7757_dmae3_slaves[] = {
 	{
 		.slave_id	= SHDMA_SLAVE_RIIC9_RX,
 		.addr		= 0x1e590013,
-		.chcr		= SM_INC | 0x800 | 0x40000000 |
+		.chcr		= DM_INC | 0x800 | 0x40000000 |
 				  TS_INDEX2VAL(XMIT_SZ_8BIT),
 		.mid_rid	= 0x52,
 	},
@@ -659,6 +659,54 @@ static struct platform_device spi0_device = {
 	.resource	= spi0_resources,
 };
 
+static struct resource usb_ehci_resources[] = {
+	[0] = {
+		.start	= 0xfe4f1000,
+		.end	= 0xfe4f10ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 57,
+		.end	= 57,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device usb_ehci_device = {
+	.name		= "sh_ehci",
+	.id		= -1,
+	.dev = {
+		.dma_mask = &usb_ehci_device.dev.coherent_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(usb_ehci_resources),
+	.resource	= usb_ehci_resources,
+};
+
+static struct resource usb_ohci_resources[] = {
+	[0] = {
+		.start	= 0xfe4f1800,
+		.end	= 0xfe4f18ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 57,
+		.end	= 57,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device usb_ohci_device = {
+	.name		= "sh_ohci",
+	.id		= -1,
+	.dev = {
+		.dma_mask = &usb_ohci_device.dev.coherent_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(usb_ohci_resources),
+	.resource	= usb_ohci_resources,
+};
+
 static struct platform_device *sh7757_devices[] __initdata = {
 	&scif2_device,
 	&scif3_device,
@@ -670,6 +718,8 @@ static struct platform_device *sh7757_devices[] __initdata = {
 	&dma2_device,
 	&dma3_device,
 	&spi0_device,
+	&usb_ehci_device,
+	&usb_ohci_device,
 };
 
 static int __init sh7757_devices_setup(void)
@@ -1039,13 +1089,13 @@ static DECLARE_INTC_DESC(intc_desc, "sh7757", vectors, groups,
 
 /* Support for external interrupt pins in IRQ mode */
 static struct intc_vect vectors_irq0123[] __initdata = {
-	INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280),
-	INTC_VECT(IRQ2, 0x2c0), INTC_VECT(IRQ3, 0x300),
+	INTC_VECT(IRQ0, 0x200), INTC_VECT(IRQ1, 0x240),
+	INTC_VECT(IRQ2, 0x280), INTC_VECT(IRQ3, 0x2c0),
 };
 
 static struct intc_vect vectors_irq4567[] __initdata = {
-	INTC_VECT(IRQ4, 0x340), INTC_VECT(IRQ5, 0x380),
-	INTC_VECT(IRQ6, 0x3c0), INTC_VECT(IRQ7, 0x200),
+	INTC_VECT(IRQ4, 0x300), INTC_VECT(IRQ5, 0x340),
+	INTC_VECT(IRQ6, 0x380), INTC_VECT(IRQ7, 0x3c0),
 };
 
 static struct intc_sense_reg sense_registers[] __initdata = {
@@ -1079,14 +1129,14 @@ static struct intc_vect vectors_irl0123[] __initdata = {
 };
 
 static struct intc_vect vectors_irl4567[] __initdata = {
-	INTC_VECT(IRL4_LLLL, 0xb00), INTC_VECT(IRL4_LLLH, 0xb20),
-	INTC_VECT(IRL4_LLHL, 0xb40), INTC_VECT(IRL4_LLHH, 0xb60),
-	INTC_VECT(IRL4_LHLL, 0xb80), INTC_VECT(IRL4_LHLH, 0xba0),
-	INTC_VECT(IRL4_LHHL, 0xbc0), INTC_VECT(IRL4_LHHH, 0xbe0),
-	INTC_VECT(IRL4_HLLL, 0xc00), INTC_VECT(IRL4_HLLH, 0xc20),
-	INTC_VECT(IRL4_HLHL, 0xc40), INTC_VECT(IRL4_HLHH, 0xc60),
-	INTC_VECT(IRL4_HHLL, 0xc80), INTC_VECT(IRL4_HHLH, 0xca0),
-	INTC_VECT(IRL4_HHHL, 0xcc0),
+	INTC_VECT(IRL4_LLLL, 0x200), INTC_VECT(IRL4_LLLH, 0x220),
+	INTC_VECT(IRL4_LLHL, 0x240), INTC_VECT(IRL4_LLHH, 0x260),
+	INTC_VECT(IRL4_LHLL, 0x280), INTC_VECT(IRL4_LHLH, 0x2a0),
+	INTC_VECT(IRL4_LHHL, 0x2c0), INTC_VECT(IRL4_LHHH, 0x2e0),
+	INTC_VECT(IRL4_HLLL, 0x300), INTC_VECT(IRL4_HLLH, 0x320),
+	INTC_VECT(IRL4_HLHL, 0x340), INTC_VECT(IRL4_HLHH, 0x360),
+	INTC_VECT(IRL4_HHLL, 0x380), INTC_VECT(IRL4_HHLH, 0x3a0),
+	INTC_VECT(IRL4_HHHL, 0x3c0),
 };
 
 static DECLARE_INTC_DESC(intc_desc_irl0123, "sh7757-irl0123", vectors_irl0123,