bnx2x: Fix line indentation

This patch contains cosmetic changes only to fix code alignment, and update copyright comment year

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/bnx2x/bnx2x_link.h

@@ -1,4 +1,4 @@
-/* Copyright 2008-2010 Broadcom Corporation
+/* Copyright 2008-2011 Broadcom Corporation
  *
  * Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
@@ -33,7 +33,7 @@
 #define BNX2X_FLOW_CTRL_BOTH		PORT_FEATURE_FLOW_CONTROL_BOTH
 #define BNX2X_FLOW_CTRL_NONE		PORT_FEATURE_FLOW_CONTROL_NONE
 
-#define SPEED_AUTO_NEG	    0
+#define SPEED_AUTO_NEG		0
 #define SPEED_12000		12000
 #define SPEED_12500		12500
 #define SPEED_13000		13000
@@ -44,8 +44,8 @@
 #define SFP_EEPROM_VENDOR_NAME_SIZE		16
 #define SFP_EEPROM_VENDOR_OUI_ADDR		0x25
 #define SFP_EEPROM_VENDOR_OUI_SIZE		3
-#define SFP_EEPROM_PART_NO_ADDR 		0x28
-#define SFP_EEPROM_PART_NO_SIZE		16
+#define SFP_EEPROM_PART_NO_ADDR			0x28
+#define SFP_EEPROM_PART_NO_SIZE			16
 #define PWR_FLT_ERR_MSG_LEN			250
 
 #define XGXS_EXT_PHY_TYPE(ext_phy_config) \
@@ -62,7 +62,7 @@
 #define SINGLE_MEDIA(params)		(params->num_phys == 2)
 /* Dual Media board contains two external phy with different media */
 #define DUAL_MEDIA(params)		(params->num_phys == 3)
-#define FW_PARAM_MDIO_CTRL_OFFSET 16
+#define FW_PARAM_MDIO_CTRL_OFFSET		16
 #define FW_PARAM_SET(phy_addr, phy_type, mdio_access) \
 	(phy_addr | phy_type | mdio_access << FW_PARAM_MDIO_CTRL_OFFSET)
 
@@ -201,12 +201,14 @@ struct link_params {
 
 	/* Default / User Configuration */
 	u8 loopback_mode;
-#define LOOPBACK_NONE	0
-#define LOOPBACK_EMAC	1
-#define LOOPBACK_BMAC	2
+#define LOOPBACK_NONE		0
+#define LOOPBACK_EMAC		1
+#define LOOPBACK_BMAC		2
 #define LOOPBACK_XGXS		3
 #define LOOPBACK_EXT_PHY	4
-#define LOOPBACK_EXT 	5
+#define LOOPBACK_EXT		5
+#define LOOPBACK_UMAC		6
+#define LOOPBACK_XMAC		7
 
 	/* Device parameters */
 	u8 mac_addr[6];
@@ -230,10 +232,11 @@ struct link_params {
 	/* Phy register parameter */
 	u32 chip_id;
 
+	/* features */
 	u32 feature_config_flags;
-#define FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED (1<<0)
-#define FEATURE_CONFIG_PFC_ENABLED		(1<<1)
-#define FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY	(1<<2)
+#define FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED	(1<<0)
+#define FEATURE_CONFIG_PFC_ENABLED			(1<<1)
+#define FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY		(1<<2)
 #define FEATURE_CONFIG_BC_SUPPORTS_DUAL_PHY_OPT_MDL_VRFY	(1<<3)
 	/* Will be populated during common init */
 	struct bnx2x_phy phy[MAX_PHYS];
@@ -379,7 +382,7 @@ void bnx2x_ets_disabled(struct link_params *params);
 
 /* Used to configure the ETS to BW limited */
 void bnx2x_ets_bw_limit(const struct link_params *params, const u32 cos0_bw,
-						const u32 cos1_bw);
+			const u32 cos1_bw);
 
 /* Used to configure the ETS to strict */
 u8 bnx2x_ets_strict(const struct link_params *params, const u8 strict_cos);