hwmon: (w83627ehf) The W83627DHG has 8 VID pins

While the W83627EHF/EHG has only 6 VID pins, the W83627DHG has 8 VID
pins, to support VRD 11.0. Add support for this.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>

Documentation/hwmon/w83627ehf

@@ -23,8 +23,9 @@ W83627DHG super I/O chips. We will refer to them collectively as Winbond chips.
 
 The chips implement three temperature sensors, five fan rotation
 speed sensors, ten analog voltage sensors (only nine for the 627DHG), one
-VID (6 pins), alarms with beep warnings (control unimplemented), and
-some automatic fan regulation strategies (plus manual fan control mode).
+VID (6 pins for the 627EHF/EHG, 8 pins for the 627DHG), alarms with beep
+warnings (control unimplemented), and some automatic fan regulation
+strategies (plus manual fan control mode).
 
 Temperatures are measured in degrees Celsius and measurement resolution is 1
 degC for temp1 and 0.5 degC for temp2 and temp3. An alarm is triggered when

drivers/hwmon/w83627ehf.c

@@ -1202,8 +1202,7 @@ static void w83627ehf_device_remove_files(struct device *dev)
 		device_remove_file(dev, &sda_temp[i].dev_attr);
 
 	device_remove_file(dev, &dev_attr_name);
-	if (data->vid != 0x3f)
-		device_remove_file(dev, &dev_attr_cpu0_vid);
+	device_remove_file(dev, &dev_attr_cpu0_vid);
 }
 
 /* Get the monitoring functions started */
@@ -1303,11 +1302,16 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev)
 			}
 		}
 
-		data->vid = superio_inb(sio_data->sioreg, SIO_REG_VID_DATA) & 0x3f;
+		data->vid = superio_inb(sio_data->sioreg, SIO_REG_VID_DATA);
+		if (sio_data->kind == w83627ehf) /* 6 VID pins only */
+			data->vid &= 0x3f;
+
+		err = device_create_file(dev, &dev_attr_cpu0_vid);
+		if (err)
+			goto exit_release;
 	} else {
 		dev_info(dev, "VID pins in output mode, CPU VID not "
 			 "available\n");
-		data->vid = 0x3f;
 	}
 
 	/* fan4 and fan5 share some pins with the GPIO and serial flash */
@@ -1390,12 +1394,6 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev)
 	if (err)
 		goto exit_remove;
 
-	if (data->vid != 0x3f) {
-		err = device_create_file(dev, &dev_attr_cpu0_vid);
-		if (err)
-			goto exit_remove;
-	}
-
 	data->hwmon_dev = hwmon_device_register(dev);
 	if (IS_ERR(data->hwmon_dev)) {
 		err = PTR_ERR(data->hwmon_dev);