Merge branch 'pci/misc' into next

* pci/misc:
  PCI: Fix comment typo for pci_add_cap_save_buffer()
  PCI: Return -ENOSYS for SR-IOV operations on non-SR-IOV devices
  PCI: Update NumVFs register when disabling SR-IOV
  x86/PCI: MMCONFIG: Check earlier for MMCONFIG region at address zero
  PCI: Convert class code to use dev_groups
  frv/PCI: Mark pcibios_fixup_bus() as non-init
  x86/pci/mrst: Cleanup checkpatch.pl warnings
  PCI: Rename "PCI Express support" kconfig title
  PCI: Fix comment typo in iov.c

arch/frv/mb93090-mb00/pci-vdk.c

@@ -320,7 +320,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases);
  *  are examined.
  */
 
-void __init pcibios_fixup_bus(struct pci_bus *bus)
+void pcibios_fixup_bus(struct pci_bus *bus)
 {
 #if 0
 	printk("### PCIBIOS_FIXUP_BUS(%d)\n",bus->number);

arch/x86/pci/mmconfig-shared.c

@@ -700,7 +700,7 @@ int pci_mmconfig_insert(struct device *dev, u16 seg, u8 start, u8 end,
 	if (!(pci_probe & PCI_PROBE_MMCONF) || pci_mmcfg_arch_init_failed)
 		return -ENODEV;
 
-	if (start > end)
+	if (start > end || !addr)
 		return -EINVAL;
 
 	mutex_lock(&pci_mmcfg_lock);
@@ -716,11 +716,6 @@ int pci_mmconfig_insert(struct device *dev, u16 seg, u8 start, u8 end,
 		return -EEXIST;
 	}
 
-	if (!addr) {
-		mutex_unlock(&pci_mmcfg_lock);
-		return -EINVAL;
-	}
-
 	rc = -EBUSY;
 	cfg = pci_mmconfig_alloc(seg, start, end, addr);
 	if (cfg == NULL) {

arch/x86/pci/mrst.c

@@ -23,11 +23,11 @@
 #include <linux/ioport.h>
 #include <linux/init.h>
 #include <linux/dmi.h>
+#include <linux/acpi.h>
+#include <linux/io.h>
+#include <linux/smp.h>
 
-#include <asm/acpi.h>
 #include <asm/segment.h>
-#include <asm/io.h>
-#include <asm/smp.h>
 #include <asm/pci_x86.h>
 #include <asm/hw_irq.h>
 #include <asm/io_apic.h>
@@ -43,7 +43,7 @@
 #define PCI_FIXED_BAR_4_SIZE	0x14
 #define PCI_FIXED_BAR_5_SIZE	0x1c
 
-static int pci_soc_mode = 0;
+static int pci_soc_mode;
 
 /**
  * fixed_bar_cap - return the offset of the fixed BAR cap if found
@@ -141,7 +141,8 @@ static int pci_device_update_fixed(struct pci_bus *bus, unsigned int devfn,
  */
 static bool type1_access_ok(unsigned int bus, unsigned int devfn, int reg)
 {
-	/* This is a workaround for A0 LNC bug where PCI status register does
+	/*
+	 * This is a workaround for A0 LNC bug where PCI status register does
 	 * not have new CAP bit set. can not be written by SW either.
 	 *
 	 * PCI header type in real LNC indicates a single function device, this
@@ -154,7 +155,7 @@ static bool type1_access_ok(unsigned int bus, unsigned int devfn, int reg)
 				|| devfn == PCI_DEVFN(0, 0)
 				|| devfn == PCI_DEVFN(3, 0)))
 		return 1;
-	return 0; /* langwell on others */
+	return 0; /* Langwell on others */
 }
 
 static int pci_read(struct pci_bus *bus, unsigned int devfn, int where,
@@ -172,7 +173,8 @@ static int pci_write(struct pci_bus *bus, unsigned int devfn, int where,
 {
 	int offset;
 
-	/* On MRST, there is no PCI ROM BAR, this will cause a subsequent read
+	/*
+	 * On MRST, there is no PCI ROM BAR, this will cause a subsequent read
 	 * to ROM BAR return 0 then being ignored.
 	 */
 	if (where == PCI_ROM_ADDRESS)
@@ -210,7 +212,8 @@ static int mrst_pci_irq_enable(struct pci_dev *dev)
 
 	pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
 
-	/* MRST only have IOAPIC, the PCI irq lines are 1:1 mapped to
+	/*
+	 * MRST only have IOAPIC, the PCI irq lines are 1:1 mapped to
 	 * IOAPIC RTE entries, so we just enable RTE for the device.
 	 */
 	irq_attr.ioapic = mp_find_ioapic(dev->irq);
@@ -235,7 +238,7 @@ struct pci_ops pci_mrst_ops = {
  */
 int __init pci_mrst_init(void)
 {
-	printk(KERN_INFO "Intel MID platform detected, using MID PCI ops\n");
+	pr_info("Intel MID platform detected, using MID PCI ops\n");
 	pci_mmcfg_late_init();
 	pcibios_enable_irq = mrst_pci_irq_enable;
 	pci_root_ops = pci_mrst_ops;
@@ -244,17 +247,21 @@ int __init pci_mrst_init(void)
 	return 1;
 }
 
-/* Langwell devices are not true pci devices, they are not subject to 10 ms
- * d3 to d0 delay required by pci spec.
+/*
+ * Langwell devices are not true PCI devices; they are not subject to 10 ms
+ * d3 to d0 delay required by PCI spec.
  */
 static void pci_d3delay_fixup(struct pci_dev *dev)
 {
-	/* PCI fixups are effectively decided compile time. If we have a dual
-	   SoC/non-SoC kernel we don't want to mangle d3 on non SoC devices */
-        if (!pci_soc_mode)
-            return;
-	/* true pci devices in lincroft should allow type 1 access, the rest
-	 * are langwell fake pci devices.
+	/*
+	 * PCI fixups are effectively decided compile time. If we have a dual
+	 * SoC/non-SoC kernel we don't want to mangle d3 on non-SoC devices.
+	 */
+	if (!pci_soc_mode)
+		return;
+	/*
+	 * True PCI devices in Lincroft should allow type 1 access, the rest
+	 * are Langwell fake PCI devices.
 	 */
 	if (type1_access_ok(dev->bus->number, dev->devfn, PCI_DEVICE_ID))
 		return;

drivers/pci/iov.c

@@ -286,7 +286,6 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn)
 	    (!(iov->cap & PCI_SRIOV_CAP_VFM) && (nr_virtfn > initial)))
 		return -EINVAL;
 
-	pci_write_config_word(dev, iov->pos + PCI_SRIOV_NUM_VF, nr_virtfn);
 	pci_read_config_word(dev, iov->pos + PCI_SRIOV_VF_OFFSET, &offset);
 	pci_read_config_word(dev, iov->pos + PCI_SRIOV_VF_STRIDE, &stride);
 	if (!offset || (nr_virtfn > 1 && !stride))
@@ -324,7 +323,7 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn)
 
 		if (!pdev->is_physfn) {
 			pci_dev_put(pdev);
-			return -ENODEV;
+			return -ENOSYS;
 		}
 
 		rc = sysfs_create_link(&dev->dev.kobj,
@@ -334,6 +333,7 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn)
 			return rc;
 	}
 
+	pci_write_config_word(dev, iov->pos + PCI_SRIOV_NUM_VF, nr_virtfn);
 	iov->ctrl |= PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE;
 	pci_cfg_access_lock(dev);
 	pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl);
@@ -368,6 +368,7 @@ failed:
 	iov->ctrl &= ~(PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE);
 	pci_cfg_access_lock(dev);
 	pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl);
+	pci_write_config_word(dev, iov->pos + PCI_SRIOV_NUM_VF, 0);
 	ssleep(1);
 	pci_cfg_access_unlock(dev);
 
@@ -401,6 +402,7 @@ static void sriov_disable(struct pci_dev *dev)
 		sysfs_remove_link(&dev->dev.kobj, "dep_link");
 
 	iov->num_VFs = 0;
+	pci_write_config_word(dev, iov->pos + PCI_SRIOV_NUM_VF, 0);
 }
 
 static int sriov_init(struct pci_dev *dev, int pos)
@@ -662,7 +664,7 @@ int pci_enable_sriov(struct pci_dev *dev, int nr_virtfn)
 	might_sleep();
 
 	if (!dev->is_physfn)
-		return -ENODEV;
+		return -ENOSYS;
 
 	return sriov_enable(dev, nr_virtfn);
 }
@@ -722,7 +724,7 @@ EXPORT_SYMBOL_GPL(pci_num_vf);
  * @dev: the PCI device
  *
  * Returns number of VFs belonging to this device that are assigned to a guest.
- * If device is not a physical function returns -ENODEV.
+ * If device is not a physical function returns 0.
  */
 int pci_vfs_assigned(struct pci_dev *dev)
 {
@@ -767,12 +769,15 @@ EXPORT_SYMBOL_GPL(pci_vfs_assigned);
  * device's mutex held.
  *
  * Returns 0 if PF is an SRIOV-capable device and
- * value of numvfs valid. If not a PF with VFS, return -EINVAL;
+ * value of numvfs valid. If not a PF return -ENOSYS;
+ * if numvfs is invalid return -EINVAL;
  * if VFs already enabled, return -EBUSY.
  */
 int pci_sriov_set_totalvfs(struct pci_dev *dev, u16 numvfs)
 {
-	if (!dev->is_physfn || (numvfs > dev->sriov->total_VFs))
+	if (!dev->is_physfn)
+		return -ENOSYS;
+	if (numvfs > dev->sriov->total_VFs)
 		return -EINVAL;
 
 	/* Shouldn't change if VFs already enabled */
@@ -786,17 +791,17 @@ int pci_sriov_set_totalvfs(struct pci_dev *dev, u16 numvfs)
 EXPORT_SYMBOL_GPL(pci_sriov_set_totalvfs);
 
 /**
- * pci_sriov_get_totalvfs -- get total VFs supported on this devic3
+ * pci_sriov_get_totalvfs -- get total VFs supported on this device
  * @dev: the PCI PF device
  *
  * For a PCIe device with SRIOV support, return the PCIe
  * SRIOV capability value of TotalVFs or the value of driver_max_VFs
- * if the driver reduced it.  Otherwise, -EINVAL.
+ * if the driver reduced it.  Otherwise 0.
  */
 int pci_sriov_get_totalvfs(struct pci_dev *dev)
 {
 	if (!dev->is_physfn)
-		return -EINVAL;
+		return 0;
 
 	if (dev->sriov->driver_max_VFs)
 		return dev->sriov->driver_max_VFs;

drivers/pci/pci-sysfs.c

@@ -131,19 +131,19 @@ static ssize_t pci_bus_show_cpuaffinity(struct device *dev,
 	return ret;
 }
 
-static inline ssize_t pci_bus_show_cpumaskaffinity(struct device *dev,
-					struct device_attribute *attr,
-					char *buf)
+static ssize_t cpuaffinity_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
 {
 	return pci_bus_show_cpuaffinity(dev, 0, attr, buf);
 }
+static DEVICE_ATTR_RO(cpuaffinity);
 
-static inline ssize_t pci_bus_show_cpulistaffinity(struct device *dev,
-					struct device_attribute *attr,
-					char *buf)
+static ssize_t cpulistaffinity_show(struct device *dev,
+				    struct device_attribute *attr, char *buf)
 {
 	return pci_bus_show_cpuaffinity(dev, 1, attr, buf);
 }
+static DEVICE_ATTR_RO(cpulistaffinity);
 
 /* show resources */
 static ssize_t
@@ -379,6 +379,7 @@ dev_bus_rescan_store(struct device *dev, struct device_attribute *attr,
 	}
 	return count;
 }
+static DEVICE_ATTR(rescan, (S_IWUSR|S_IWGRP), NULL, dev_bus_rescan_store);
 
 #if defined(CONFIG_PM_RUNTIME) && defined(CONFIG_ACPI)
 static ssize_t d3cold_allowed_store(struct device *dev,
@@ -514,11 +515,20 @@ struct device_attribute pci_dev_attrs[] = {
 	__ATTR_NULL,
 };
 
-struct device_attribute pcibus_dev_attrs[] = {
-	__ATTR(rescan, (S_IWUSR|S_IWGRP), NULL, dev_bus_rescan_store),
-	__ATTR(cpuaffinity, S_IRUGO, pci_bus_show_cpumaskaffinity, NULL),
-	__ATTR(cpulistaffinity, S_IRUGO, pci_bus_show_cpulistaffinity, NULL),
-	__ATTR_NULL,
+static struct attribute *pcibus_attrs[] = {
+	&dev_attr_rescan.attr,
+	&dev_attr_cpuaffinity.attr,
+	&dev_attr_cpulistaffinity.attr,
+	NULL,
+};
+
+static const struct attribute_group pcibus_group = {
+	.attrs = pcibus_attrs,
+};
+
+const struct attribute_group *pcibus_groups[] = {
+	&pcibus_group,
+	NULL,
 };
 
 static ssize_t

drivers/pci/pci.c

@@ -1992,7 +1992,7 @@ static void pci_add_saved_cap(struct pci_dev *pci_dev,
 }
 
 /**
- * pci_add_save_buffer - allocate buffer for saving given capability registers
+ * pci_add_cap_save_buffer - allocate buffer for saving given capability registers
  * @dev: the PCI device
  * @cap: the capability to allocate the buffer for
  * @size: requested size of the buffer

drivers/pci/pci.h

@@ -151,7 +151,7 @@ static inline int pci_no_d1d2(struct pci_dev *dev)
 
 }
 extern struct device_attribute pci_dev_attrs[];
-extern struct device_attribute pcibus_dev_attrs[];
+extern const struct attribute_group *pcibus_groups[];
 extern struct device_type pci_dev_type;
 extern struct bus_attribute pci_bus_attrs[];
 

drivers/pci/pcie/Kconfig

@@ -2,7 +2,7 @@
 # PCI Express Port Bus Configuration
 #
 config PCIEPORTBUS
-	bool "PCI Express support"
+	bool "PCI Express Port Bus support"
 	depends on PCI
 	help
 	  This automatically enables PCI Express Port Bus support. Users can

drivers/pci/probe.c

@@ -96,7 +96,7 @@ static void release_pcibus_dev(struct device *dev)
 static struct class pcibus_class = {
 	.name		= "pci_bus",
 	.dev_release	= &release_pcibus_dev,
-	.dev_attrs	= pcibus_dev_attrs,
+	.dev_groups	= pcibus_groups,
 };
 
 static int __init pcibus_class_init(void)