V4L/DVB (8376): cx25840: move cx25840_vbi_setup to core.c and rename to cx25840_std_setup

cx25840_vbi_setup has nothing to do with setting up VBI, but everything
with setting up the standard. Move to cx25840-core.c and rename.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

drivers/media/video/cx25840/cx25840-core.c

@@ -237,7 +237,7 @@ static void cx25840_initialize(struct i2c_client *client)
 	cx25840_write(client, 0x8d3, 0x1f);
 	cx25840_write(client, 0x8e3, 0x03);
 
-	cx25840_vbi_setup(client);
+	cx25840_std_setup(client);
 
 	/* trial and error says these are needed to get audio */
 	cx25840_write(client, 0x914, 0xa0);
@@ -337,7 +337,7 @@ static void cx23885_initialize(struct i2c_client *client)
 	finish_wait(&state->fw_wait, &wait);
 	destroy_workqueue(q);
 
-	cx25840_vbi_setup(client);
+	cx25840_std_setup(client);
 
 	/* (re)set input */
 	set_input(client, state->vid_input, state->aud_input);
@@ -348,6 +348,153 @@ static void cx23885_initialize(struct i2c_client *client)
 
 /* ----------------------------------------------------------------------- */
 
+void cx25840_std_setup(struct i2c_client *client)
+{
+	struct cx25840_state *state = i2c_get_clientdata(client);
+	v4l2_std_id std = state->std;
+	int hblank, hactive, burst, vblank, vactive, sc;
+	int vblank656, src_decimation;
+	int luma_lpf, uv_lpf, comb;
+	u32 pll_int, pll_frac, pll_post;
+
+	/* datasheet startup, step 8d */
+	if (std & ~V4L2_STD_NTSC)
+		cx25840_write(client, 0x49f, 0x11);
+	else
+		cx25840_write(client, 0x49f, 0x14);
+
+	if (std & V4L2_STD_625_50) {
+		hblank = 132;
+		hactive = 720;
+		burst = 93;
+		vblank = 36;
+		vactive = 580;
+		vblank656 = 40;
+		src_decimation = 0x21f;
+		luma_lpf = 2;
+
+		if (std & V4L2_STD_SECAM) {
+			uv_lpf = 0;
+			comb = 0;
+			sc = 0x0a425f;
+		} else if (std == V4L2_STD_PAL_Nc) {
+			uv_lpf = 1;
+			comb = 0x20;
+			sc = 556453;
+		} else {
+			uv_lpf = 1;
+			comb = 0x20;
+			sc = 688739;
+		}
+	} else {
+		hactive = 720;
+		hblank = 122;
+		vactive = 487;
+		luma_lpf = 1;
+		uv_lpf = 1;
+
+		src_decimation = 0x21f;
+		if (std == V4L2_STD_PAL_60) {
+			vblank = 26;
+			vblank656 = 26;
+			burst = 0x5b;
+			luma_lpf = 2;
+			comb = 0x20;
+			sc = 688739;
+		} else if (std == V4L2_STD_PAL_M) {
+			vblank = 20;
+			vblank656 = 24;
+			burst = 0x61;
+			comb = 0x20;
+			sc = 555452;
+		} else {
+			vblank = 26;
+			vblank656 = 26;
+			burst = 0x5b;
+			comb = 0x66;
+			sc = 556063;
+		}
+	}
+
+	/* DEBUG: Displays configured PLL frequency */
+	pll_int = cx25840_read(client, 0x108);
+	pll_frac = cx25840_read4(client, 0x10c) & 0x1ffffff;
+	pll_post = cx25840_read(client, 0x109);
+	v4l_dbg(1, cx25840_debug, client,
+				"PLL regs = int: %u, frac: %u, post: %u\n",
+				pll_int, pll_frac, pll_post);
+
+	if (pll_post) {
+		int fin, fsc;
+		int pll = (28636363L * ((((u64)pll_int) << 25L) + pll_frac)) >> 25L;
+
+		pll /= pll_post;
+		v4l_dbg(1, cx25840_debug, client, "PLL = %d.%06d MHz\n",
+				pll / 1000000, pll % 1000000);
+		v4l_dbg(1, cx25840_debug, client, "PLL/8 = %d.%06d MHz\n",
+				pll / 8000000, (pll / 8) % 1000000);
+
+		fin = ((u64)src_decimation * pll) >> 12;
+		v4l_dbg(1, cx25840_debug, client,
+				"ADC Sampling freq = %d.%06d MHz\n",
+				fin / 1000000, fin % 1000000);
+
+		fsc = (((u64)sc) * pll) >> 24L;
+		v4l_dbg(1, cx25840_debug, client,
+				"Chroma sub-carrier freq = %d.%06d MHz\n",
+				fsc / 1000000, fsc % 1000000);
+
+		v4l_dbg(1, cx25840_debug, client, "hblank %i, hactive %i, "
+			"vblank %i, vactive %i, vblank656 %i, src_dec %i, "
+			"burst 0x%02x, luma_lpf %i, uv_lpf %i, comb 0x%02x, "
+			"sc 0x%06x\n",
+			hblank, hactive, vblank, vactive, vblank656,
+			src_decimation, burst, luma_lpf, uv_lpf, comb, sc);
+	}
+
+	/* Sets horizontal blanking delay and active lines */
+	cx25840_write(client, 0x470, hblank);
+	cx25840_write(client, 0x471,
+			0xff & (((hblank >> 8) & 0x3) | (hactive << 4)));
+	cx25840_write(client, 0x472, hactive >> 4);
+
+	/* Sets burst gate delay */
+	cx25840_write(client, 0x473, burst);
+
+	/* Sets vertical blanking delay and active duration */
+	cx25840_write(client, 0x474, vblank);
+	cx25840_write(client, 0x475,
+			0xff & (((vblank >> 8) & 0x3) | (vactive << 4)));
+	cx25840_write(client, 0x476, vactive >> 4);
+	cx25840_write(client, 0x477, vblank656);
+
+	/* Sets src decimation rate */
+	cx25840_write(client, 0x478, 0xff & src_decimation);
+	cx25840_write(client, 0x479, 0xff & (src_decimation >> 8));
+
+	/* Sets Luma and UV Low pass filters */
+	cx25840_write(client, 0x47a, luma_lpf << 6 | ((uv_lpf << 4) & 0x30));
+
+	/* Enables comb filters */
+	cx25840_write(client, 0x47b, comb);
+
+	/* Sets SC Step*/
+	cx25840_write(client, 0x47c, sc);
+	cx25840_write(client, 0x47d, 0xff & sc >> 8);
+	cx25840_write(client, 0x47e, 0xff & sc >> 16);
+
+	/* Sets VBI parameters */
+	if (std & V4L2_STD_625_50) {
+		cx25840_write(client, 0x47f, 0x01);
+		state->vbi_line_offset = 5;
+	} else {
+		cx25840_write(client, 0x47f, 0x00);
+		state->vbi_line_offset = 8;
+	}
+}
+
+/* ----------------------------------------------------------------------- */
+
 static void input_change(struct i2c_client *client)
 {
 	struct cx25840_state *state = i2c_get_clientdata(client);
@@ -565,7 +712,7 @@ static int set_v4lstd(struct i2c_client *client)
 	}
 	cx25840_and_or(client, 0x400, ~0xf, fmt);
 	cx25840_and_or(client, 0x403, ~0x3, pal_m);
-	cx25840_vbi_setup(client);
+	cx25840_std_setup(client);
 	if (!state->is_cx25836)
 		input_change(client);
 	return 0;

drivers/media/video/cx25840/cx25840-core.h

@@ -61,6 +61,7 @@ int cx25840_write4(struct i2c_client *client, u16 addr, u32 value);
 u8 cx25840_read(struct i2c_client *client, u16 addr);
 u32 cx25840_read4(struct i2c_client *client, u16 addr);
 int cx25840_and_or(struct i2c_client *client, u16 addr, unsigned mask, u8 value);
+void cx25840_std_setup(struct i2c_client *client);
 
 /* ----------------------------------------------------------------------- */
 /* cx25850-firmware.c                                                      */
@@ -73,7 +74,6 @@ void cx25840_audio_set_path(struct i2c_client *client);
 
 /* ----------------------------------------------------------------------- */
 /* cx25850-vbi.c                                                           */
-void cx25840_vbi_setup(struct i2c_client *client);
 int cx25840_vbi(struct i2c_client *client, unsigned int cmd, void *arg);
 
 #endif

drivers/media/video/cx25840/cx25840-vbi.c

@@ -82,150 +82,6 @@ static int decode_vps(u8 * dst, u8 * p)
 	return err & 0xf0;
 }
 
-void cx25840_vbi_setup(struct i2c_client *client)
-{
-	struct cx25840_state *state = i2c_get_clientdata(client);
-	v4l2_std_id std = state->std;
-	int hblank,hactive,burst,vblank,vactive,sc,vblank656,src_decimation;
-	int luma_lpf,uv_lpf, comb;
-	u32 pll_int,pll_frac,pll_post;
-
-	/* datasheet startup, step 8d */
-	if (std & ~V4L2_STD_NTSC) {
-		cx25840_write(client, 0x49f, 0x11);
-	} else {
-		cx25840_write(client, 0x49f, 0x14);
-	}
-
-	if (std & V4L2_STD_625_50) {
-		hblank=0x084;
-		hactive=0x2d0;
-		burst=0x5d;
-		vblank=0x024;
-		vactive=0x244;
-		vblank656=0x28;
-		src_decimation=0x21f;
-
-		luma_lpf=2;
-		if (std & V4L2_STD_SECAM) {
-			uv_lpf=0;
-			comb=0;
-			sc=0x0a425f;
-		} else if (std == V4L2_STD_PAL_Nc) {
-			uv_lpf=1;
-			comb=0x20;
-			sc=556453;
-		} else {
-			uv_lpf=1;
-			comb=0x20;
-			sc=0x0a8263;
-		}
-	} else {
-		hactive=720;
-		hblank=122;
-		vactive=487;
-		luma_lpf=1;
-		uv_lpf=1;
-
-		src_decimation=0x21f;
-		if (std == V4L2_STD_PAL_60) {
-			vblank=26;
-			vblank656=26;
-			burst=0x5b;
-			luma_lpf=2;
-			comb=0x20;
-			sc=0x0a8263;
-		} else if (std == V4L2_STD_PAL_M) {
-			vblank=20;
-			vblank656=24;
-			burst=0x61;
-			comb=0x20;
-
-			sc=555452;
-		} else {
-			vblank=26;
-			vblank656=26;
-			burst=0x5b;
-			comb=0x66;
-			sc=556063;
-		}
-	}
-
-	/* DEBUG: Displays configured PLL frequency */
-	pll_int=cx25840_read(client, 0x108);
-	pll_frac=cx25840_read4(client, 0x10c)&0x1ffffff;
-	pll_post=cx25840_read(client, 0x109);
-	v4l_dbg(1, cx25840_debug, client,
-				"PLL regs = int: %u, frac: %u, post: %u\n",
-				pll_int,pll_frac,pll_post);
-
-	if (pll_post) {
-		int fin, fsc;
-		int pll= (28636363L*((((u64)pll_int)<<25L)+pll_frac)) >>25L;
-
-		pll/=pll_post;
-		v4l_dbg(1, cx25840_debug, client, "PLL = %d.%06d MHz\n",
-						pll/1000000, pll%1000000);
-		v4l_dbg(1, cx25840_debug, client, "PLL/8 = %d.%06d MHz\n",
-						pll/8000000, (pll/8)%1000000);
-
-		fin=((u64)src_decimation*pll)>>12;
-		v4l_dbg(1, cx25840_debug, client, "ADC Sampling freq = "
-						"%d.%06d MHz\n",
-						fin/1000000,fin%1000000);
-
-		fsc= (((u64)sc)*pll) >> 24L;
-		v4l_dbg(1, cx25840_debug, client, "Chroma sub-carrier freq = "
-						"%d.%06d MHz\n",
-						fsc/1000000,fsc%1000000);
-
-		v4l_dbg(1, cx25840_debug, client, "hblank %i, hactive %i, "
-			"vblank %i, vactive %i, vblank656 %i, src_dec %i, "
-			"burst 0x%02x, luma_lpf %i, uv_lpf %i, comb 0x%02x,"
-			" sc 0x%06x\n",
-			hblank, hactive, vblank, vactive, vblank656,
-			src_decimation, burst, luma_lpf, uv_lpf, comb, sc);
-	}
-
-	/* Sets horizontal blanking delay and active lines */
-	cx25840_write(client, 0x470, hblank);
-	cx25840_write(client, 0x471, 0xff&(((hblank>>8)&0x3)|(hactive <<4)));
-	cx25840_write(client, 0x472, hactive>>4);
-
-	/* Sets burst gate delay */
-	cx25840_write(client, 0x473, burst);
-
-	/* Sets vertical blanking delay and active duration */
-	cx25840_write(client, 0x474, vblank);
-	cx25840_write(client, 0x475, 0xff&(((vblank>>8)&0x3)|(vactive <<4)));
-	cx25840_write(client, 0x476, vactive>>4);
-	cx25840_write(client, 0x477, vblank656);
-
-	/* Sets src decimation rate */
-	cx25840_write(client, 0x478, 0xff&src_decimation);
-	cx25840_write(client, 0x479, 0xff&(src_decimation>>8));
-
-	/* Sets Luma and UV Low pass filters */
-	cx25840_write(client, 0x47a, luma_lpf<<6|((uv_lpf<<4)&0x30));
-
-	/* Enables comb filters */
-	cx25840_write(client, 0x47b, comb);
-
-	/* Sets SC Step*/
-	cx25840_write(client, 0x47c, sc);
-	cx25840_write(client, 0x47d, 0xff&sc>>8);
-	cx25840_write(client, 0x47e, 0xff&sc>>16);
-
-	/* Sets VBI parameters */
-	if (std & V4L2_STD_625_50) {
-		cx25840_write(client, 0x47f, 0x01);
-		state->vbi_line_offset = 5;
-	} else {
-		cx25840_write(client, 0x47f, 0x00);
-		state->vbi_line_offset = 8;
-	}
-}
-
 int cx25840_vbi(struct i2c_client *client, unsigned int cmd, void *arg)
 {
 	struct cx25840_state *state = i2c_get_clientdata(client);
@@ -292,8 +148,8 @@ int cx25840_vbi(struct i2c_client *client, unsigned int cmd, void *arg)
 			/* raw VBI */
 			memset(svbi, 0, sizeof(*svbi));
 
-			/* Setup VBI */
-			cx25840_vbi_setup(client);
+			/* Setup standard */
+			cx25840_std_setup(client);
 
 			/* VBI Offset */
 			cx25840_write(client, 0x47f, vbi_offset);
@@ -304,8 +160,8 @@ int cx25840_vbi(struct i2c_client *client, unsigned int cmd, void *arg)
 		for (x = 0; x <= 23; x++)
 			lcr[x] = 0x00;
 
-		/* Setup VBI */
-		cx25840_vbi_setup(client);
+		/* Setup standard */
+		cx25840_std_setup(client);
 
 		/* Sliced VBI */
 		cx25840_write(client, 0x404, 0x32);	/* Ancillary data */