ARM: EXYNOS4: Adds Samsung NURI board support

This patch adds Samsung NURI board support.

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

arch/arm/mach-exynos4/Kconfig

@@ -123,6 +123,21 @@ config MACH_UNIVERSAL_C210
 	  Machine support for Samsung Mobile Universal S5PC210 Reference
 	  Board.
 
+config MACH_NURI
+	bool "Mobile NURI Board"
+	select CPU_EXYNOS4210
+	select S3C_DEV_WDT
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC2
+	select S3C_DEV_HSMMC3
+	select S3C_DEV_I2C1
+	select S3C_DEV_I2C5
+	select EXYNOS4_SETUP_I2C1
+	select EXYNOS4_SETUP_I2C5
+	select EXYNOS4_SETUP_SDHCI
+	help
+	  Machine support for Samsung Mobile NURI Board.
+
 endmenu
 
 comment "Configuration for HSMMC bus width"

arch/arm/mach-exynos4/Makefile

@@ -25,6 +25,7 @@ obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
 obj-$(CONFIG_MACH_SMDKC210)		+= mach-smdkc210.o
 obj-$(CONFIG_MACH_SMDKV310)		+= mach-smdkv310.o
 obj-$(CONFIG_MACH_UNIVERSAL_C210)	+= mach-universal_c210.o
+obj-$(CONFIG_MACH_NURI)			+= mach-nuri.o
 
 # device support
 

arch/arm/mach-exynos4/mach-nuri.c

@@ -0,0 +1,231 @@
+/*
+ * linux/arch/arm/mach-exynos4/mach-nuri.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/gpio_keys.h>
+#include <linux/gpio.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/mmc/host.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/exynos4.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/sdhci.h>
+
+#include <mach/map.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define NURI_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+				 S3C2410_UCON_RXILEVEL |	\
+				 S3C2410_UCON_TXIRQMODE |	\
+				 S3C2410_UCON_RXIRQMODE |	\
+				 S3C2410_UCON_RXFIFO_TOI |	\
+				 S3C2443_UCON_RXERR_IRQEN)
+
+#define NURI_ULCON_DEFAULT	S3C2410_LCON_CS8
+
+#define NURI_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+				 S5PV210_UFCON_TXTRIG256 |	\
+				 S5PV210_UFCON_RXTRIG256)
+
+enum fixed_regulator_id {
+	FIXED_REG_ID_MMC = 0,
+};
+
+static struct s3c2410_uartcfg nuri_uartcfgs[] __initdata = {
+	{
+		.hwport		= 0,
+		.ucon		= NURI_UCON_DEFAULT,
+		.ulcon		= NURI_ULCON_DEFAULT,
+		.ufcon		= NURI_UFCON_DEFAULT,
+	},
+	{
+		.hwport		= 1,
+		.ucon		= NURI_UCON_DEFAULT,
+		.ulcon		= NURI_ULCON_DEFAULT,
+		.ufcon		= NURI_UFCON_DEFAULT,
+	},
+	{
+		.hwport		= 2,
+		.ucon		= NURI_UCON_DEFAULT,
+		.ulcon		= NURI_ULCON_DEFAULT,
+		.ufcon		= NURI_UFCON_DEFAULT,
+	},
+	{
+		.hwport		= 3,
+		.ucon		= NURI_UCON_DEFAULT,
+		.ulcon		= NURI_ULCON_DEFAULT,
+		.ufcon		= NURI_UFCON_DEFAULT,
+	},
+};
+
+/* eMMC */
+static struct s3c_sdhci_platdata nuri_hsmmc0_data __initdata = {
+	.max_width		= 8,
+	.host_caps		= (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
+				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
+				MMC_CAP_DISABLE | MMC_CAP_ERASE),
+	.cd_type		= S3C_SDHCI_CD_PERMANENT,
+	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+static struct regulator_consumer_supply emmc_supplies[] = {
+	REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"),
+	REGULATOR_SUPPLY("vmmc", "dw_mmc"),
+};
+
+static struct regulator_init_data emmc_fixed_voltage_init_data = {
+	.constraints		= {
+		.name		= "VMEM_VDD_2.8V",
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(emmc_supplies),
+	.consumer_supplies	= emmc_supplies,
+};
+
+static struct fixed_voltage_config emmc_fixed_voltage_config = {
+	.supply_name		= "MASSMEMORY_EN (inverted)",
+	.microvolts		= 2800000,
+	.gpio			= EXYNOS4_GPL1(1),
+	.enable_high		= false,
+	.init_data		= &emmc_fixed_voltage_init_data,
+};
+
+static struct platform_device emmc_fixed_voltage = {
+	.name			= "reg-fixed-voltage",
+	.id			= FIXED_REG_ID_MMC,
+	.dev			= {
+		.platform_data	= &emmc_fixed_voltage_config,
+	},
+};
+
+/* SD */
+static struct s3c_sdhci_platdata nuri_hsmmc2_data __initdata = {
+	.max_width		= 4,
+	.host_caps		= MMC_CAP_4_BIT_DATA |
+				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
+				MMC_CAP_DISABLE,
+	.ext_cd_gpio		= EXYNOS4_GPX3(3),	/* XEINT_27 */
+	.ext_cd_gpio_invert	= 1,
+	.cd_type		= S3C_SDHCI_CD_GPIO,
+	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+/* WLAN */
+static struct s3c_sdhci_platdata nuri_hsmmc3_data __initdata = {
+	.max_width		= 4,
+	.host_caps		= MMC_CAP_4_BIT_DATA |
+				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
+	.cd_type		= S3C_SDHCI_CD_EXTERNAL,
+	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+static void __init nuri_sdhci_init(void)
+{
+	s3c_sdhci0_set_platdata(&nuri_hsmmc0_data);
+	s3c_sdhci2_set_platdata(&nuri_hsmmc2_data);
+	s3c_sdhci3_set_platdata(&nuri_hsmmc3_data);
+}
+
+/* GPIO KEYS */
+static struct gpio_keys_button nuri_gpio_keys_tables[] = {
+	{
+		.code			= KEY_VOLUMEUP,
+		.gpio			= EXYNOS4_GPX2(0),	/* XEINT16 */
+		.desc			= "gpio-keys: KEY_VOLUMEUP",
+		.type			= EV_KEY,
+		.active_low		= 1,
+		.debounce_interval	= 1,
+	}, {
+		.code			= KEY_VOLUMEDOWN,
+		.gpio			= EXYNOS4_GPX2(1),	/* XEINT17 */
+		.desc			= "gpio-keys: KEY_VOLUMEDOWN",
+		.type			= EV_KEY,
+		.active_low		= 1,
+		.debounce_interval	= 1,
+	}, {
+		.code			= KEY_POWER,
+		.gpio			= EXYNOS4_GPX2(7),	/* XEINT23 */
+		.desc			= "gpio-keys: KEY_POWER",
+		.type			= EV_KEY,
+		.active_low		= 1,
+		.wakeup			= 1,
+		.debounce_interval	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data nuri_gpio_keys_data = {
+	.buttons		= nuri_gpio_keys_tables,
+	.nbuttons		= ARRAY_SIZE(nuri_gpio_keys_tables),
+};
+
+static struct platform_device nuri_gpio_keys = {
+	.name			= "gpio-keys",
+	.dev			= {
+		.platform_data	= &nuri_gpio_keys_data,
+	},
+};
+
+/* I2C1 */
+static struct i2c_board_info i2c1_devs[] __initdata = {
+	/* Gyro, To be updated */
+};
+
+/* GPIO I2C 5 (PMIC) */
+static struct i2c_board_info i2c5_devs[] __initdata = {
+	/* max8997, To be updated */
+};
+
+static struct platform_device *nuri_devices[] __initdata = {
+	/* Samsung Platform Devices */
+	&emmc_fixed_voltage,
+	&s3c_device_hsmmc0,
+	&s3c_device_hsmmc2,
+	&s3c_device_hsmmc3,
+	&s3c_device_wdt,
+
+	/* NURI Devices */
+	&nuri_gpio_keys,
+};
+
+static void __init nuri_map_io(void)
+{
+	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	s3c24xx_init_clocks(24000000);
+	s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs));
+}
+
+static void __init nuri_machine_init(void)
+{
+	nuri_sdhci_init();
+
+	i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
+	i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
+
+	/* Last */
+	platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices));
+}
+
+MACHINE_START(NURI, "NURI")
+	/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
+	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.init_irq	= exynos4_init_irq,
+	.map_io		= nuri_map_io,
+	.init_machine	= nuri_machine_init,
+	.timer		= &exynos4_timer,
+MACHINE_END