Merge remote-tracking branch 'kumar/next' into next

Documentation/devicetree/bindings/powerpc/fsl/ifc.txt

@@ -12,9 +12,12 @@ Properties:
 - #size-cells : Either one or two, depending on how large each chipselect
                 can be.
 - reg : Offset and length of the register set for the device
-- interrupts : IFC has two interrupts. The first one is the "common"
-               interrupt(CM_EVTER_STAT), and second is the NAND interrupt
-               (NAND_EVTER_STAT).
+- interrupts: IFC may have one or two interrupts.  If two interrupt
+              specifiers are present, the first is the "common"
+              interrupt (CM_EVTER_STAT), and the second is the NAND
+              interrupt (NAND_EVTER_STAT).  If there is only one,
+              that interrupt reports both types of event.
+
 
 - ranges : Each range corresponds to a single chipselect, and covers
            the entire access window as configured.

arch/powerpc/Kconfig

@@ -215,7 +215,8 @@ config ARCH_HIBERNATION_POSSIBLE
 config ARCH_SUSPEND_POSSIBLE
 	def_bool y
 	depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx || \
-		   (PPC_85xx && !SMP) || PPC_86xx || PPC_PSERIES || 44x || 40x
+		   (PPC_85xx && !PPC_E500MC) || PPC_86xx || PPC_PSERIES \
+		   || 44x || 40x
 
 config PPC_DCR_NATIVE
 	bool
@@ -328,7 +329,8 @@ config SWIOTLB
 
 config HOTPLUG_CPU
 	bool "Support for enabling/disabling CPUs"
-	depends on SMP && HOTPLUG && EXPERIMENTAL && (PPC_PSERIES || PPC_PMAC || PPC_POWERNV)
+	depends on SMP && HOTPLUG && EXPERIMENTAL && (PPC_PSERIES || \
+	PPC_PMAC || PPC_POWERNV || (PPC_85xx && !PPC_E500MC))
 	---help---
 	  Say Y here to be able to disable and re-enable individual
 	  CPUs at runtime on SMP machines.

arch/powerpc/boot/dts/fsl/e500mc_power_isa.dtsi

@@ -0,0 +1,58 @@
+/*
+ * e500mc Power ISA Device Tree Source (include)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/ {
+	cpus {
+		power-isa-version = "2.06";
+		power-isa-b;		// Base
+		power-isa-e;		// Embedded
+		power-isa-atb;		// Alternate Time Base
+		power-isa-cs;		// Cache Specification
+		power-isa-ds;		// Decorated Storage
+		power-isa-e.ed;		// Embedded.Enhanced Debug
+		power-isa-e.pd;		// Embedded.External PID
+		power-isa-e.hv;		// Embedded.Hypervisor
+		power-isa-e.le;		// Embedded.Little-Endian
+		power-isa-e.pm;		// Embedded.Performance Monitor
+		power-isa-e.pc;		// Embedded.Processor Control
+		power-isa-ecl;		// Embedded Cache Locking
+		power-isa-exp;		// External Proxy
+		power-isa-fp;		// Floating Point
+		power-isa-fp.r;		// Floating Point.Record
+		power-isa-mmc;		// Memory Coherence
+		power-isa-scpm;		// Store Conditional Page Mobility
+		power-isa-wt;		// Wait
+		mmu-type = "power-embedded";
+	};
+};

arch/powerpc/boot/dts/fsl/e500v2_power_isa.dtsi

@@ -0,0 +1,52 @@
+/*
+ * e500v2 Power ISA Device Tree Source (include)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/ {
+	cpus {
+		power-isa-version = "2.03";
+		power-isa-b;		// Base
+		power-isa-e;		// Embedded
+		power-isa-atb;		// Alternate Time Base
+		power-isa-cs;		// Cache Specification
+		power-isa-e.le;		// Embedded.Little-Endian
+		power-isa-e.pm;		// Embedded.Performance Monitor
+		power-isa-ecl;		// Embedded Cache Locking
+		power-isa-mmc;		// Memory Coherence
+		power-isa-sp;		// Signal Processing Engine
+		power-isa-sp.fd;	// SPE.Embedded Float Scalar Double
+		power-isa-sp.fs;	// SPE.Embedded Float Scalar Single
+		power-isa-sp.fv;	// SPE.Embedded Float Vector
+		mmu-type = "power-embedded";
+	};
+};

arch/powerpc/boot/dts/fsl/e5500_power_isa.dtsi

@@ -0,0 +1,59 @@
+/*
+ * e5500 Power ISA Device Tree Source (include)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/ {
+	cpus {
+		power-isa-version = "2.06";
+		power-isa-b;		// Base
+		power-isa-e;		// Embedded
+		power-isa-atb;		// Alternate Time Base
+		power-isa-cs;		// Cache Specification
+		power-isa-ds;		// Decorated Storage
+		power-isa-e.ed;		// Embedded.Enhanced Debug
+		power-isa-e.pd;		// Embedded.External PID
+		power-isa-e.hv;		// Embedded.Hypervisor
+		power-isa-e.le;		// Embedded.Little-Endian
+		power-isa-e.pm;		// Embedded.Performance Monitor
+		power-isa-e.pc;		// Embedded.Processor Control
+		power-isa-ecl;		// Embedded Cache Locking
+		power-isa-exp;		// External Proxy
+		power-isa-fp;		// Floating Point
+		power-isa-fp.r;		// Floating Point.Record
+		power-isa-mmc;		// Memory Coherence
+		power-isa-scpm;		// Store Conditional Page Mobility
+		power-isa-wt;		// Wait
+		power-isa-64;		// 64-bit
+		mmu-type = "power-embedded";
+	};
+};

arch/powerpc/boot/dts/fsl/mpc8536si-pre.dtsi

@@ -33,6 +33,9 @@
  */
 
 /dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
 / {
 	compatible = "fsl,MPC8536";
 	#address-cells = <2>;

arch/powerpc/boot/dts/fsl/mpc8544si-pre.dtsi

@@ -33,6 +33,9 @@
  */
 
 /dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
 / {
 	compatible = "fsl,MPC8544";
 	#address-cells = <2>;

arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi

@@ -33,6 +33,9 @@
  */
 
 /dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
 / {
 	compatible = "fsl,MPC8548";
 	#address-cells = <2>;

arch/powerpc/boot/dts/fsl/mpc8568si-pre.dtsi

@@ -33,6 +33,9 @@
  */
 
 /dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
 / {
 	compatible = "fsl,MPC8568";
 	#address-cells = <2>;

arch/powerpc/boot/dts/fsl/mpc8569si-pre.dtsi

@@ -33,6 +33,9 @@
  */
 
 /dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
 / {
 	compatible = "fsl,MPC8569";
 	#address-cells = <2>;

arch/powerpc/boot/dts/fsl/mpc8572si-pre.dtsi

@@ -33,6 +33,9 @@
  */
 
 /dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
 / {
 	compatible = "fsl,MPC8572";
 	#address-cells = <2>;

arch/powerpc/boot/dts/fsl/p1010si-pre.dtsi

@@ -33,6 +33,9 @@
  */
 
 /dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
 / {
 	compatible = "fsl,P1010";
 	#address-cells = <2>;

arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi

@@ -33,6 +33,9 @@
  */
 
 /dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
 / {
 	compatible = "fsl,P1020";
 	#address-cells = <2>;

arch/powerpc/boot/dts/fsl/p1021si-pre.dtsi

@@ -33,6 +33,9 @@
  */
 
 /dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
 / {
 	compatible = "fsl,P1021";
 	#address-cells = <2>;

arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi

@@ -33,6 +33,9 @@
  */
 
 /dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
 / {
 	compatible = "fsl,P1022";
 	#address-cells = <2>;

arch/powerpc/boot/dts/fsl/p1023si-pre.dtsi

@@ -33,6 +33,9 @@
  */
 
 /dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
 / {
 	compatible = "fsl,P1023";
 	#address-cells = <2>;

arch/powerpc/boot/dts/fsl/p2020si-pre.dtsi

@@ -33,6 +33,9 @@
  */
 
 /dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
 / {
 	compatible = "fsl,P2020";
 	#address-cells = <2>;

arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi

@@ -33,6 +33,9 @@
  */
 
 /dts-v1/;
+
+/include/ "e500mc_power_isa.dtsi"
+
 / {
 	compatible = "fsl,P2041";
 	#address-cells = <2>;

arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi

@@ -33,6 +33,9 @@
  */
 
 /dts-v1/;
+
+/include/ "e500mc_power_isa.dtsi"
+
 / {
 	compatible = "fsl,P3041";
 	#address-cells = <2>;

arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi

@@ -33,6 +33,9 @@
  */
 
 /dts-v1/;
+
+/include/ "e500mc_power_isa.dtsi"
+
 / {
 	compatible = "fsl,P4080";
 	#address-cells = <2>;

arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi

@@ -33,6 +33,9 @@
  */
 
 /dts-v1/;
+
+/include/ "e5500_power_isa.dtsi"
+
 / {
 	compatible = "fsl,P5020";
 	#address-cells = <2>;

arch/powerpc/boot/dts/fsl/p5040si-post.dtsi

@@ -0,0 +1,320 @@
+/*
+ * P5040 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * This software is provided by Freescale Semiconductor "as is" and any
+ * express or implied warranties, including, but not limited to, the implied
+ * warranties of merchantability and fitness for a particular purpose are
+ * disclaimed. In no event shall Freescale Semiconductor be liable for any
+ * direct, indirect, incidental, special, exemplary, or consequential damages
+ * (including, but not limited to, procurement of substitute goods or services;
+ * loss of use, data, or profits; or business interruption) however caused and
+ * on any theory of liability, whether in contract, strict liability, or tort
+ * (including negligence or otherwise) arising in any way out of the use of this
+ * software, even if advised of the possibility of such damage.
+ */
+
+&lbc {
+	compatible = "fsl,p5040-elbc", "fsl,elbc", "simple-bus";
+	interrupts = <25 2 0 0>;
+	#address-cells = <2>;
+	#size-cells = <1>;
+};
+
+/* controller at 0x200000 */
+&pci0 {
+	compatible = "fsl,p5040-pcie", "fsl,qoriq-pcie-v2.4";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 15>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 15>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 40 1 0 0
+			0000 0 0 2 &mpic 1 1 0 0
+			0000 0 0 3 &mpic 2 1 0 0
+			0000 0 0 4 &mpic 3 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x201000 */
+&pci1 {
+	compatible = "fsl,p5040-pcie", "fsl,qoriq-pcie-v2.4";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 14>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 14>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 41 1 0 0
+			0000 0 0 2 &mpic 5 1 0 0
+			0000 0 0 3 &mpic 6 1 0 0
+			0000 0 0 4 &mpic 7 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x202000 */
+&pci2 {
+	compatible = "fsl,p5040-pcie", "fsl,qoriq-pcie-v2.4";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 13>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 13>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 42 1 0 0
+			0000 0 0 2 &mpic 9 1 0 0
+			0000 0 0 3 &mpic 10 1 0 0
+			0000 0 0 4 &mpic 11 1 0 0
+			>;
+	};
+};
+
+&dcsr {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,dcsr", "simple-bus";
+
+	dcsr-epu@0 {
+		compatible = "fsl,dcsr-epu";
+		interrupts = <52 2 0 0
+			      84 2 0 0
+			      85 2 0 0>;
+		reg = <0x0 0x1000>;
+	};
+	dcsr-npc {
+		compatible = "fsl,dcsr-npc";
+		reg = <0x1000 0x1000 0x1000000 0x8000>;
+	};
+	dcsr-nxc@2000 {
+		compatible = "fsl,dcsr-nxc";
+		reg = <0x2000 0x1000>;
+	};
+	dcsr-corenet {
+		compatible = "fsl,dcsr-corenet";
+		reg = <0x8000 0x1000 0xB0000 0x1000>;
+	};
+	dcsr-dpaa@9000 {
+		compatible = "fsl,p5040-dcsr-dpaa", "fsl,dcsr-dpaa";
+		reg = <0x9000 0x1000>;
+	};
+	dcsr-ocn@11000 {
+		compatible = "fsl,p5040-dcsr-ocn", "fsl,dcsr-ocn";
+		reg = <0x11000 0x1000>;
+	};
+	dcsr-ddr@12000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr1>;
+		reg = <0x12000 0x1000>;
+	};
+	dcsr-ddr@13000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr2>;
+		reg = <0x13000 0x1000>;
+	};
+	dcsr-nal@18000 {
+		compatible = "fsl,p5040-dcsr-nal", "fsl,dcsr-nal";
+		reg = <0x18000 0x1000>;
+	};
+	dcsr-rcpm@22000 {
+		compatible = "fsl,p5040-dcsr-rcpm", "fsl,dcsr-rcpm";
+		reg = <0x22000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@40000 {
+		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu0>;
+		reg = <0x40000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@41000 {
+		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu1>;
+		reg = <0x41000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@42000 {
+		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu2>;
+		reg = <0x42000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@43000 {
+		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu3>;
+		reg = <0x43000 0x1000>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "simple-bus";
+
+	soc-sram-error {
+		compatible = "fsl,soc-sram-error";
+		interrupts = <16 2 1 29>;
+	};
+
+	corenet-law@0 {
+		compatible = "fsl,corenet-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <32>;
+	};
+
+	ddr1: memory-controller@8000 {
+		compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
+		reg = <0x8000 0x1000>;
+		interrupts = <16 2 1 23>;
+	};
+
+	ddr2: memory-controller@9000 {
+		compatible = "fsl,qoriq-memory-controller-v4.5","fsl,qoriq-memory-controller";
+		reg = <0x9000 0x1000>;
+		interrupts = <16 2 1 22>;
+	};
+
+	cpc: l3-cache-controller@10000 {
+		compatible = "fsl,p5040-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
+		reg = <0x10000 0x1000
+		       0x11000 0x1000>;
+		interrupts = <16 2 1 27
+			      16 2 1 26>;
+	};
+
+	corenet-cf@18000 {
+		compatible = "fsl,corenet-cf";
+		reg = <0x18000 0x1000>;
+		interrupts = <16 2 1 31>;
+		fsl,ccf-num-csdids = <32>;
+		fsl,ccf-num-snoopids = <32>;
+	};
+
+	iommu@20000 {
+		compatible = "fsl,pamu-v1.0", "fsl,pamu";
+		reg = <0x20000 0x5000>;
+		interrupts = <
+			24 2 0 0
+			16 2 1 30>;
+	};
+
+/include/ "qoriq-mpic.dtsi"
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,p5040-device-config", "fsl,qoriq-device-config-1.0";
+		reg = <0xe0000 0xe00>;
+		fsl,has-rstcr;
+		#sleep-cells = <1>;
+		fsl,liodn-bits = <12>;
+	};
+
+	pins: global-utilities@e0e00 {
+		compatible = "fsl,p5040-pin-control", "fsl,qoriq-pin-control-1.0";
+		reg = <0xe0e00 0x200>;
+		#sleep-cells = <2>;
+	};
+
+	clockgen: global-utilities@e1000 {
+		compatible = "fsl,p5040-clockgen", "fsl,qoriq-clockgen-1.0";
+		reg = <0xe1000 0x1000>;
+		clock-frequency = <0>;
+	};
+
+	rcpm: global-utilities@e2000 {
+		compatible = "fsl,p5040-rcpm", "fsl,qoriq-rcpm-1.0";
+		reg = <0xe2000 0x1000>;
+		#sleep-cells = <1>;
+	};
+
+	sfp: sfp@e8000 {
+		compatible = "fsl,p5040-sfp", "fsl,qoriq-sfp-1.0";
+		reg	   = <0xe8000 0x1000>;
+	};
+
+	serdes: serdes@ea000 {
+		compatible = "fsl,p5040-serdes";
+		reg	   = <0xea000 0x1000>;
+	};
+
+/include/ "qoriq-dma-0.dtsi"
+/include/ "qoriq-dma-1.dtsi"
+/include/ "qoriq-espi-0.dtsi"
+	spi@110000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "qoriq-esdhc-0.dtsi"
+	sdhc@114000 {
+		sdhci,auto-cmd12;
+	};
+
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+		usb0: usb@210000 {
+			compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
+			phy_type = "utmi";
+			port0;
+		};
+
+/include/ "qoriq-usb2-dr-0.dtsi"
+		usb1: usb@211000 {
+			compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
+			dr_mode = "host";
+			phy_type = "utmi";
+		};
+
+/include/ "qoriq-sata2-0.dtsi"
+/include/ "qoriq-sata2-1.dtsi"
+/include/ "qoriq-sec5.2-0.dtsi"
+};

arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi

@@ -0,0 +1,114 @@
+/*
+ * P5040 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * This software is provided by Freescale Semiconductor "as is" and any
+ * express or implied warranties, including, but not limited to, the implied
+ * warranties of merchantability and fitness for a particular purpose are
+ * disclaimed. In no event shall Freescale Semiconductor be liable for any
+ * direct, indirect, incidental, special, exemplary, or consequential damages
+ * (including, but not limited to, procurement of substitute goods or services;
+ * loss of use, data, or profits; or business interruption) however caused and
+ * on any theory of liability, whether in contract, strict liability, or tort
+ * (including negligence or otherwise) arising in any way out of the use of this
+ * software, even if advised of the possibility of such damage.
+ */
+
+/dts-v1/;
+
+/include/ "e5500_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,P5040";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ccsr = &soc;
+		dcsr = &dcsr;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		dma0 = &dma0;
+		dma1 = &dma1;
+		sdhc = &sdhc;
+		msi0 = &msi0;
+		msi1 = &msi1;
+		msi2 = &msi2;
+
+		crypto = &crypto;
+		sec_jr0 = &sec_jr0;
+		sec_jr1 = &sec_jr1;
+		sec_jr2 = &sec_jr2;
+		sec_jr3 = &sec_jr3;
+		rtic_a = &rtic_a;
+		rtic_b = &rtic_b;
+		rtic_c = &rtic_c;
+		rtic_d = &rtic_d;
+		sec_mon = &sec_mon;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e5500@0 {
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu1: PowerPC,e5500@1 {
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2_1>;
+			L2_1: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu2: PowerPC,e5500@2 {
+			device_type = "cpu";
+			reg = <2>;
+			next-level-cache = <&L2_2>;
+			L2_2: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu3: PowerPC,e5500@3 {
+			device_type = "cpu";
+			reg = <3>;
+			next-level-cache = <&L2_3>;
+			L2_3: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+	};
+};

arch/powerpc/boot/dts/fsl/qoriq-sec5.2-0.dtsi

@@ -0,0 +1,118 @@
+/*
+ * QorIQ Sec/Crypto 5.2 device tree stub [ controller @ offset 0x300000 ]
+ *
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto: crypto@300000 {
+	compatible = "fsl,sec-v5.2", "fsl,sec-v5.0", "fsl,sec-v4.0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	reg		 = <0x300000 0x10000>;
+	ranges		 = <0 0x300000 0x10000>;
+	interrupts	 = <92 2 0 0>;
+
+	sec_jr0: jr@1000 {
+		compatible = "fsl,sec-v5.2-job-ring",
+			     "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x1000 0x1000>;
+		interrupts = <88 2 0 0>;
+	};
+
+	sec_jr1: jr@2000 {
+		compatible = "fsl,sec-v5.2-job-ring",
+			     "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x2000 0x1000>;
+		interrupts = <89 2 0 0>;
+	};
+
+	sec_jr2: jr@3000 {
+		compatible = "fsl,sec-v5.2-job-ring",
+			     "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x3000 0x1000>;
+		interrupts = <90 2 0 0>;
+	};
+
+	sec_jr3: jr@4000 {
+		compatible = "fsl,sec-v5.2-job-ring",
+			     "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x4000 0x1000>;
+		interrupts = <91 2 0 0>;
+	};
+
+	rtic@6000 {
+		compatible = "fsl,sec-v5.2-rtic",
+			     "fsl,sec-v5.0-rtic",
+			     "fsl,sec-v4.0-rtic";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x6000 0x100>;
+		ranges = <0x0 0x6100 0xe00>;
+
+		rtic_a: rtic-a@0 {
+			compatible = "fsl,sec-v5.2-rtic-memory",
+				     "fsl,sec-v5.0-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x00 0x20 0x100 0x80>;
+		};
+
+		rtic_b: rtic-b@20 {
+			compatible = "fsl,sec-v5.2-rtic-memory",
+				     "fsl,sec-v5.0-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x20 0x20 0x200 0x80>;
+		};
+
+		rtic_c: rtic-c@40 {
+			compatible = "fsl,sec-v5.2-rtic-memory",
+				     "fsl,sec-v5.0-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x40 0x20 0x300 0x80>;
+		};
+
+		rtic_d: rtic-d@60 {
+			compatible = "fsl,sec-v5.2-rtic-memory",
+				     "fsl,sec-v5.0-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x60 0x20 0x500 0x80>;
+		};
+	};
+};
+
+sec_mon: sec_mon@314000 {
+	compatible = "fsl,sec-v5.2-mon", "fsl,sec-v5.0-mon", "fsl,sec-v4.0-mon";
+	reg = <0x314000 0x1000>;
+	interrupts = <93 2 0 0>;
+};

arch/powerpc/boot/dts/mpc8536ds.dtsi

@@ -132,6 +132,10 @@
 			reg = <0x68>;
 			interrupts = <0 0x1 0 0>;
 		};
+		adt7461@4c {
+			compatible = "adi,adt7461";
+			reg = <0x4c>;
+		};
 	};
 
 	spi@7000 {

arch/powerpc/boot/dts/mpc8540ads.dts

@@ -11,6 +11,8 @@
 
 /dts-v1/;
 
+/include/ "fsl/e500v2_power_isa.dtsi"
+
 / {
 	model = "MPC8540ADS";
 	compatible = "MPC8540ADS", "MPC85xxADS";

arch/powerpc/boot/dts/mpc8541cds.dts

@@ -11,6 +11,8 @@
 
 /dts-v1/;
 
+/include/ "fsl/e500v2_power_isa.dtsi"
+
 / {
 	model = "MPC8541CDS";
 	compatible = "MPC8541CDS", "MPC85xxCDS";

arch/powerpc/boot/dts/mpc8544ds.dts

@@ -20,8 +20,10 @@
 		reg = <0 0 0 0>;	// Filled by U-Boot
 	};
 
-	lbc: localbus@e0005000 {
+	board_lbc: lbc: localbus@e0005000 {
 		reg = <0 0xe0005000 0 0x1000>;
+
+		ranges = <0x0 0x0 0x0 0xff800000 0x800000>;
 	};
 
 	board_soc: soc: soc8544@e0000000 {

arch/powerpc/boot/dts/mpc8544ds.dtsi

@@ -32,6 +32,45 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
+&board_lbc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x800000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@0 {
+			reg = <0x0 0x10000>;
+			label = "dtb-nor";
+		};
+
+		partition@20000 {
+			reg = <0x20000 0x30000>;
+			label = "diagnostic-nor";
+			read-only;
+		};
+
+		partition@200000 {
+			reg = <0x200000 0x200000>;
+			label = "dink-nor";
+			read-only;
+		};
+
+		partition@400000 {
+			reg = <0x400000 0x380000>;
+			label = "kernel-nor";
+		};
+
+		partition@780000 {
+			reg = <0x780000 0x80000>;
+			label = "u-boot-nor";
+			read-only;
+		};
+	};
+};
+
 &board_soc {
 	enet0: ethernet@24000 {
 		phy-handle = <&phy0>;

arch/powerpc/boot/dts/mpc8555cds.dts

@@ -11,6 +11,8 @@
 
 /dts-v1/;
 
+/include/ "fsl/e500v2_power_isa.dtsi"
+
 / {
 	model = "MPC8555CDS";
 	compatible = "MPC8555CDS", "MPC85xxCDS";

arch/powerpc/boot/dts/mpc8560ads.dts

@@ -11,6 +11,8 @@
 
 /dts-v1/;
 
+/include/ "fsl/e500v2_power_isa.dtsi"
+
 / {
 	model = "MPC8560ADS";
 	compatible = "MPC8560ADS", "MPC85xxADS";

arch/powerpc/boot/dts/p1020rdb_camp_core0.dts

@@ -1,63 +0,0 @@
-/*
- * P1020 RDB  Core0 Device Tree Source in CAMP mode.
- *
- * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
- * can be shared, all the other devices must be assigned to one core only.
- * This dts file allows core0 to have memory, l2, i2c, spi, gpio, tdm, dma, usb,
- * eth1, eth2, sdhc, crypto, global-util, message, pci0, pci1, msi.
- *
- * Please note to add "-b 0" for core0's dts compiling.
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "p1020rdb.dts"
-
-/ {
-	model = "fsl,P1020RDB";
-	compatible = "fsl,P1020RDB", "fsl,MPC85XXRDB-CAMP";
-
-	aliases {
-		ethernet1 = &enet1;
-		ethernet2 = &enet2;
-		serial0 = &serial0;
-		pci0 = &pci0;
-		pci1 = &pci1;
-	};
-
-	cpus {
-		PowerPC,P1020@1 {
-			status = "disabled";
-		};
-	};
-
-	memory {
-		device_type = "memory";
-	};
-
-	localbus@ffe05000 {
-		status = "disabled";
-	};
-
-	soc@ffe00000 {
-		serial1: serial@4600 {
-			status = "disabled";
-		};
-
-		enet0: ethernet@b0000 {
-			status = "disabled";
-		};
-
-		mpic: pic@40000 {
-			protected-sources = <
-			42 29 30 34	/* serial1, enet0-queue-group0 */
-			17 18 24 45	/* enet0-queue-group1, crypto */
-			>;
-		};
-	};
-};

arch/powerpc/boot/dts/p1020rdb_camp_core1.dts

@@ -1,141 +0,0 @@
-/*
- * P1020 RDB Core1 Device Tree Source in CAMP mode.
- *
- * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
- * can be shared, all the other devices must be assigned to one core only.
- * This dts allows core1 to have l2, eth0, crypto.
- *
- * Please note to add "-b 1" for core1's dts compiling.
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "p1020rdb.dts"
-
-/ {
-	model = "fsl,P1020RDB";
-	compatible = "fsl,P1020RDB", "fsl,MPC85XXRDB-CAMP";
-
-	aliases {
-		ethernet0 = &enet0;
-		serial0 = &serial1;
-		};
-
-	cpus {
-		PowerPC,P1020@0 {
-			status = "disabled";
-		};
-	};
-
-	memory {
-		device_type = "memory";
-	};
-
-	localbus@ffe05000 {
-		status = "disabled";
-	};
-
-	soc@ffe00000 {
-		ecm-law@0 {
-			status = "disabled";
-		};
-
-		ecm@1000 {
-			status = "disabled";
-		};
-
-		memory-controller@2000 {
-			status = "disabled";
-		};
-
-		i2c@3000 {
-			status = "disabled";
-		};
-
-		i2c@3100 {
-			status = "disabled";
-		};
-
-		serial0: serial@4500 {
-			status = "disabled";
-		};
-
-		spi@7000 {
-			status = "disabled";
-		};
-
-		gpio: gpio-controller@f000 {
-			status = "disabled";
-		};
-
-		dma@21300 {
-			status = "disabled";
-		};
-
-		mdio@24000 {
-			status = "disabled";
-		};
-
-		mdio@25000 {
-			status = "disabled";
-		};
-
-		enet1: ethernet@b1000 {
-			status = "disabled";
-		};
-
-		enet2: ethernet@b2000 {
-			status = "disabled";
-		};
-
-		usb@22000 {
-			status = "disabled";
-		};
-
-		sdhci@2e000 {
-			status = "disabled";
-		};
-
-		mpic: pic@40000 {
-			protected-sources = <
-			16 		/* ecm, mem, L2, pci0, pci1 */
-			43 42 59	/* i2c, serial0, spi */
-			47 63 62 	/* gpio, tdm */
-			20 21 22 23	/* dma */
-			03 02 		/* mdio */
-			35 36 40	/* enet1-queue-group0 */
-			51 52 67	/* enet1-queue-group1 */
-			31 32 33	/* enet2-queue-group0 */
-			25 26 27	/* enet2-queue-group1 */
-			28 72 58 	/* usb, sdhci, crypto */
-			0xb0 0xb1 0xb2	/* message */
-			0xb3 0xb4 0xb5
-			0xb6 0xb7
-			0xe0 0xe1 0xe2	/* msi */
-			0xe3 0xe4 0xe5
-			0xe6 0xe7		/* sdhci, crypto , pci */
-			>;
-		};
-
-		msi@41600 {
-			status = "disabled";
-		};
-
-		global-utilities@e0000 {	//global utilities block
-			status = "disabled";
-		};
-	};
-
-	pci0: pcie@ffe09000 {
-		status = "disabled";
-	};
-
-	pci1: pcie@ffe0a000 {
-		status = "disabled";
-	};
-};

arch/powerpc/boot/dts/p1022ds.dtsi

@@ -149,6 +149,10 @@
 			compatible = "dallas,ds1339";
 			reg = <0x68>;
 		};
+		adt7461@4c {
+			compatible = "adi,adt7461";
+			reg = <0x4c>;
+		};
 	};
 
 	spi@7000 {

arch/powerpc/boot/dts/p1022rdk.dts

@@ -0,0 +1,188 @@
+/*
+ * P1022 RDK 32-bit Physical Address Map Device Tree Source
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1022si-pre.dtsi"
+/ {
+	model = "fsl,P1022RDK";
+	compatible = "fsl,P1022RDK";
+
+	memory {
+		device_type = "memory";
+	};
+
+	board_lbc: lbc: localbus@ffe05000 {
+		/* The P1022 RDK does not have any localbus devices */
+		status = "disabled";
+	};
+
+	board_soc: soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+
+		i2c@3100 {
+			wm8960:codec@1a {
+				compatible = "wlf,wm8960";
+				reg = <0x1a>;
+				/* MCLK source is a stand-alone oscillator */
+				clock-frequency = <12288000>;
+			};
+			rtc@68 {
+				compatible = "stm,m41t62";
+				reg = <0x68>;
+			};
+			adt7461@4c{
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+			zl6100@21{
+				compatible = "isil,zl6100";
+				reg = <0x21>;
+			};
+			zl6100@24{
+				compatible = "isil,zl6100";
+				reg = <0x24>;
+			};
+			zl6100@26{
+				compatible = "isil,zl6100";
+				reg = <0x26>;
+			};
+			zl6100@29{
+				compatible = "isil,zl6100";
+				reg = <0x29>;
+			};
+		};
+
+		spi@7000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "spansion,m25p80";
+				reg = <0>;
+				spi-max-frequency = <1000000>;
+				partition@0 {
+					label = "full-spi-flash";
+					reg = <0x00000000 0x00100000>;
+				};
+			};
+		};
+
+		ssi@15000 {
+			fsl,mode = "i2s-slave";
+			codec-handle = <&wm8960>;
+		};
+
+		usb@22000 {
+			phy_type = "ulpi";
+		};
+
+		usb@23000 {
+			phy_type = "ulpi";
+		};
+
+		mdio@24000 {
+			phy0: ethernet-phy@0 {
+				interrupts = <3 1 0 0>;
+				reg = <0x1>;
+			};
+			phy1: ethernet-phy@1 {
+				interrupts = <9 1 0 0>;
+				reg = <0x2>;
+			};
+		};
+
+		mdio@25000 {
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		ethernet@b0000 {
+			phy-handle = <&phy0>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		ethernet@b1000 {
+			phy-handle = <&phy1>;
+			tbi-handle = <&tbi0>;
+			phy-connection-type = "sgmii";
+		};
+	};
+
+	pci0: pcie@ffe09000 {
+		ranges = <0x2000000 0x0 0xe0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		reg = <0x0 0xffe09000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		ranges = <0x2000000 0x0 0xe0000000 0 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
+		reg = <0 0xffe0a000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci2: pcie@ffe0b000 {
+		ranges = <0x2000000 0x0 0xe0000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		reg = <0 0xffe0b000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "fsl/p1022si-post.dtsi"

arch/powerpc/boot/dts/p2020rdb_camp_core0.dts

@@ -1,67 +0,0 @@
-/*
- * P2020 RDB  Core0 Device Tree Source in CAMP mode.
- *
- * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
- * can be shared, all the other devices must be assigned to one core only.
- * This dts file allows core0 to have memory, l2, i2c, spi, gpio, dma1, usb,
- * eth1, eth2, sdhc, crypto, global-util, pci0.
- *
- * Copyright 2009-2011 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "p2020rdb.dts"
-
-/ {
-	model = "fsl,P2020RDB";
-	compatible = "fsl,P2020RDB", "fsl,MPC85XXRDB-CAMP";
-
-	cpus {
-		PowerPC,P2020@1 {
-			status = "disabled";
-		};
-	};
-
-	localbus@ffe05000 {
-		status = "disabled";
-	};
-
-	soc@ffe00000 {
-		serial1: serial@4600 {
-			status = "disabled";
-		};
-
-		dma@c300 {
-			status = "disabled";
-		};
-
-		enet0: ethernet@24000 {
-			status = "disabled";
-		};
-
-		mpic: pic@40000 {
-			protected-sources = <
-			42 76 77 78 79 /* serial1 , dma2 */
-			29 30 34 26 /* enet0, pci1 */
-			0xe0 0xe1 0xe2 0xe3 /* msi */
-			0xe4 0xe5 0xe6 0xe7
-			>;
-		};
-
-		msi@41600 {
-			status = "disabled";
-		};
-	};
-
-	pci0: pcie@ffe08000 {
-		status = "disabled";
-	};
-
-	pci2: pcie@ffe0a000 {
-		status = "disabled";
-	};
-};

arch/powerpc/boot/dts/p2020rdb_camp_core1.dts

@@ -1,125 +0,0 @@
-/*
- * P2020 RDB Core1 Device Tree Source in CAMP mode.
- *
- * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
- * can be shared, all the other devices must be assigned to one core only.
- * This dts allows core1 to have l2, dma2, eth0, pci1, msi.
- *
- * Please note to add "-b 1" for core1's dts compiling.
- *
- * Copyright 2009-2011 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "p2020rdb.dts"
-
-/ {
-	model = "fsl,P2020RDB";
-	compatible = "fsl,P2020RDB", "fsl,MPC85XXRDB-CAMP";
-
-	cpus {
-		PowerPC,P2020@0 {
-			status = "disabled";
-		};
-	};
-
-	localbus@ffe05000 {
-		status = "disabled";
-	};
-
-	soc@ffe00000 {
-		ecm-law@0 {
-			status = "disabled";
-		};
-
-		ecm@1000 {
-			status = "disabled";
-		};
-
-		memory-controller@2000 {
-			status = "disabled";
-		};
-
-		i2c@3000 {
-			status = "disabled";
-		};
-
-		i2c@3100 {
-			status = "disabled";
-		};
-
-		serial0: serial@4500 {
-			status = "disabled";
-		};
-
-		spi@7000 {
-			status = "disabled";
-		};
-
-		gpio: gpio-controller@f000 {
-			status = "disabled";
-		};
-
-		dma@21300 {
-			status = "disabled";
-		};
-
-		usb@22000 {
-			status = "disabled";
-		};
-
-		mdio@24520 {
-			status = "disabled";
-		};
-
-		mdio@25520 {
-			status = "disabled";
-		};
-
-		mdio@26520 {
-			status = "disabled";
-		};
-
-		enet1: ethernet@25000 {
-			status = "disabled";
-		};
-
-		enet2: ethernet@26000 {
-			status = "disabled";
-		};
-
-		sdhci@2e000 {
-			status = "disabled";
-		};
-
-		crypto@30000 {
-			status = "disabled";
-		};
-
-		mpic: pic@40000 {
-			protected-sources = <
-			17 18 43 42 59 47 /*ecm, mem, i2c, serial0, spi,gpio */
-			16 20 21 22 23 28 	/* L2, dma1, USB */
-			03 35 36 40 31 32 33 	/* mdio, enet1, enet2 */
-			72 45 58 25 		/* sdhci, crypto , pci */
-			>;
-		};
-
-		global-utilities@e0000 {	//global utilities block
-			status = "disabled";
-		};
-
-	};
-
-	pci0: pcie@ffe08000 {
-		status = "disabled";
-	};
-
-	pci1: pcie@ffe09000 {
-		status = "disabled";
-	};
-};

arch/powerpc/boot/dts/p2041rdb.dts

@@ -94,6 +94,10 @@
 				compatible = "pericom,pt7c4338";
 				reg = <0x68>;
 			};
+			adt7461@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
 		};
 
 		i2c@118100 {

arch/powerpc/boot/dts/p3041ds.dts

@@ -98,6 +98,10 @@
 				reg = <0x68>;
 				interrupts = <0x1 0x1 0 0>;
 			};
+			adt7461@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
 		};
 	};
 

arch/powerpc/boot/dts/p4080ds.dts

@@ -96,6 +96,10 @@
 				reg = <0x68>;
 				interrupts = <0x1 0x1 0 0>;
 			};
+			adt7461@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
 		};
 
 		usb0: usb@210000 {

arch/powerpc/boot/dts/p5020ds.dts

@@ -98,6 +98,10 @@
 				reg = <0x68>;
 				interrupts = <0x1 0x1 0 0>;
 			};
+			adt7461@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
 		};
 	};
 

arch/powerpc/boot/dts/p5040ds.dts

@@ -0,0 +1,207 @@
+/*
+ * P5040DS Device Tree Source
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * This software is provided by Freescale Semiconductor "as is" and any
+ * express or implied warranties, including, but not limited to, the implied
+ * warranties of merchantability and fitness for a particular purpose are
+ * disclaimed. In no event shall Freescale Semiconductor be liable for any
+ * direct, indirect, incidental, special, exemplary, or consequential damages
+ * (including, but not limited to, procurement of substitute goods or services;
+ * loss of use, data, or profits; or business interruption) however caused and
+ * on any theory of liability, whether in contract, strict liability, or tort
+ * (including negligence or otherwise) arising in any way out of the use of this
+ * software, even if advised of the possibility of such damage.
+ */
+
+/include/ "fsl/p5040si-pre.dtsi"
+
+/ {
+	model = "fsl,P5040DS";
+	compatible = "fsl,P5040DS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	memory {
+		device_type = "memory";
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "spansion,s25sl12801";
+				reg = <0>;
+				spi-max-frequency = <40000000>; /* input clock */
+				partition@u-boot {
+					label = "u-boot";
+					reg = <0x00000000 0x00100000>;
+				};
+				partition@kernel {
+					label = "kernel";
+					reg = <0x00100000 0x00500000>;
+				};
+				partition@dtb {
+					label = "dtb";
+					reg = <0x00600000 0x00100000>;
+				};
+				partition@fs {
+					label = "file system";
+					reg = <0x00700000 0x00900000>;
+				};
+			};
+		};
+
+		i2c@118100 {
+			eeprom@51 {
+				compatible = "at24,24c256";
+				reg = <0x51>;
+			};
+			eeprom@52 {
+				compatible = "at24,24c256";
+				reg = <0x52>;
+			};
+		};
+
+		i2c@119100 {
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+				interrupts = <0x1 0x1 0 0>;
+			};
+			adt7461@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+		};
+	};
+
+	lbc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x1000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xffa00000 0x00040000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x08000000>;
+			bank-width = <2>;
+			device-width = <2>;
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,elbc-fcm-nand";
+			reg = <0x2 0x0 0x40000>;
+
+			partition@0 {
+				label = "NAND U-Boot Image";
+				reg = <0x0 0x02000000>;
+			};
+
+			partition@2000000 {
+				label = "NAND Root File System";
+				reg = <0x02000000 0x10000000>;
+			};
+
+			partition@12000000 {
+				label = "NAND Compressed RFS Image";
+				reg = <0x12000000 0x08000000>;
+			};
+
+			partition@1a000000 {
+				label = "NAND Linux Kernel Image";
+				reg = <0x1a000000 0x04000000>;
+			};
+
+			partition@1e000000 {
+				label = "NAND DTB Image";
+				reg = <0x1e000000 0x01000000>;
+			};
+
+			partition@1f000000 {
+				label = "NAND Writable User area";
+				reg = <0x1f000000 0x01000000>;
+			};
+		};
+
+		board-control@3,0 {
+			compatible = "fsl,p5040ds-fpga", "fsl,fpga-ngpixis";
+			reg = <3 0 0x40>;
+		};
+	};
+
+	pci0: pcie@ffe200000 {
+		reg = <0xf 0xfe200000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe201000 {
+		reg = <0xf 0xfe201000 0 0x1000>;
+		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe202000 {
+		reg = <0xf 0xfe202000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+};
+
+/include/ "fsl/p5040si-post.dtsi"

arch/powerpc/configs/corenet32_smp_defconfig

@@ -27,6 +27,7 @@ CONFIG_P2041_RDB=y
 CONFIG_P3041_DS=y
 CONFIG_P4080_DS=y
 CONFIG_P5020_DS=y
+CONFIG_P5040_DS=y
 CONFIG_HIGHMEM=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_BINFMT_MISC=m

arch/powerpc/configs/corenet64_smp_defconfig

@@ -23,6 +23,7 @@ CONFIG_MODVERSIONS=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_MAC_PARTITION=y
 CONFIG_P5020_DS=y
+CONFIG_P5040_DS=y
 # CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set
 CONFIG_BINFMT_MISC=m
 CONFIG_IRQ_ALL_CPUS=y

arch/powerpc/configs/mpc85xx_defconfig

@@ -30,6 +30,7 @@ CONFIG_MPC85xx_DS=y
 CONFIG_MPC85xx_RDB=y
 CONFIG_P1010_RDB=y
 CONFIG_P1022_DS=y
+CONFIG_P1022_RDK=y
 CONFIG_P1023_RDS=y
 CONFIG_SOCRATES=y
 CONFIG_KSI8560=y

arch/powerpc/configs/mpc85xx_smp_defconfig

@@ -32,6 +32,7 @@ CONFIG_MPC85xx_DS=y
 CONFIG_MPC85xx_RDB=y
 CONFIG_P1010_RDB=y
 CONFIG_P1022_DS=y
+CONFIG_P1022_RDK=y
 CONFIG_P1023_RDS=y
 CONFIG_SOCRATES=y
 CONFIG_KSI8560=y

arch/powerpc/include/asm/cacheflush.h

@@ -30,6 +30,8 @@ extern void flush_dcache_page(struct page *page);
 #define flush_dcache_mmap_lock(mapping)		do { } while (0)
 #define flush_dcache_mmap_unlock(mapping)	do { } while (0)
 
+extern void __flush_disable_L1(void);
+
 extern void __flush_icache_range(unsigned long, unsigned long);
 static inline void flush_icache_range(unsigned long start, unsigned long stop)
 {

arch/powerpc/include/asm/fsl_guts.h

@@ -48,6 +48,8 @@ struct ccsr_guts {
         __be32  dmuxcr;		/* 0x.0068 - DMA Mux Control Register */
         u8	res06c[0x70 - 0x6c];
 	__be32	devdisr;	/* 0x.0070 - Device Disable Control */
+#define CCSR_GUTS_DEVDISR_TB1	0x00001000
+#define CCSR_GUTS_DEVDISR_TB0	0x00004000
 	__be32	devdisr2;	/* 0x.0074 - Device Disable Control 2 */
 	u8	res078[0x7c - 0x78];
 	__be32  pmjcr;		/* 0x.007c - 4 Power Management Jog Control Register */

arch/powerpc/include/asm/fsl_ifc.h

@@ -768,22 +768,24 @@ struct fsl_ifc_gpcm {
  */
 struct fsl_ifc_regs {
 	__be32 ifc_rev;
-	u32 res1[0x3];
+	u32 res1[0x2];
 	struct {
+		__be32 cspr_ext;
 		__be32 cspr;
-		u32 res2[0x2];
+		u32 res2;
 	} cspr_cs[FSL_IFC_BANK_COUNT];
-	u32 res3[0x18];
+	u32 res3[0x19];
 	struct {
 		__be32 amask;
 		u32 res4[0x2];
 	} amask_cs[FSL_IFC_BANK_COUNT];
-	u32 res5[0x18];
+	u32 res5[0x17];
 	struct {
+		__be32 csor_ext;
 		__be32 csor;
-		u32 res6[0x2];
+		u32 res6;
 	} csor_cs[FSL_IFC_BANK_COUNT];
-	u32 res7[0x18];
+	u32 res7[0x19];
 	struct {
 		__be32 ftim[4];
 		u32 res8[0x8];

arch/powerpc/include/asm/mpic.h

@@ -63,6 +63,7 @@
  */
 #define MPIC_TIMER_BASE			0x01100
 #define MPIC_TIMER_STRIDE		0x40
+#define MPIC_TIMER_GROUP_STRIDE		0x1000
 
 #define MPIC_TIMER_CURRENT_CNT		0x00000
 #define MPIC_TIMER_BASE_CNT		0x00010
@@ -110,10 +111,16 @@
 #define 	MPIC_VECPRI_SENSE_MASK			0x00400000
 #define MPIC_IRQ_DESTINATION		0x00010
 
+#define MPIC_FSL_BRR1			0x00000
+#define 	MPIC_FSL_BRR1_VER			0x0000ffff
+
 #define MPIC_MAX_IRQ_SOURCES	2048
 #define MPIC_MAX_CPUS		32
 #define MPIC_MAX_ISU		32
 
+#define MPIC_MAX_ERR      32
+#define MPIC_FSL_ERR_INT  16
+
 /*
  * Tsi108 implementation of MPIC has many differences from the original one
  */
@@ -266,6 +273,7 @@ struct mpic
 	struct irq_chip		hc_ipi;
 #endif
 	struct irq_chip		hc_tm;
+	struct irq_chip		hc_err;
 	const char		*name;
 	/* Flags */
 	unsigned int		flags;
@@ -279,6 +287,8 @@ struct mpic
 	/* vector numbers used for internal sources (ipi/timers) */
 	unsigned int		ipi_vecs[4];
 	unsigned int		timer_vecs[8];
+	/* vector numbers used for FSL MPIC error interrupts */
+	unsigned int		err_int_vecs[MPIC_MAX_ERR];
 
 	/* Spurious vector to program into unused sources */
 	unsigned int		spurious_vec;
@@ -296,11 +306,15 @@ struct mpic
 	phys_addr_t paddr;
 
 	/* The various ioremap'ed bases */
+	struct mpic_reg_bank	thiscpuregs;
 	struct mpic_reg_bank	gregs;
 	struct mpic_reg_bank	tmregs;
 	struct mpic_reg_bank	cpuregs[MPIC_MAX_CPUS];
 	struct mpic_reg_bank	isus[MPIC_MAX_ISU];
 
+	/* ioremap'ed base for error interrupt registers */
+	u32 __iomem	*err_regs;
+
 	/* Protected sources */
 	unsigned long		*protected;
 
@@ -365,6 +379,11 @@ struct mpic
 #define MPIC_NO_RESET			0x00004000
 /* Freescale MPIC (compatible includes "fsl,mpic") */
 #define MPIC_FSL			0x00008000
+/* Freescale MPIC supports EIMR (error interrupt mask register).
+ * This flag is set for MPIC version >= 4.1 (version determined
+ * from the BRR1 register).
+*/
+#define MPIC_FSL_HAS_EIMR		0x00010000
 
 /* MPIC HW modification ID */
 #define MPIC_REGSET_MASK		0xf0000000

arch/powerpc/include/asm/smp.h

@@ -65,6 +65,7 @@ int generic_cpu_disable(void);
 void generic_cpu_die(unsigned int cpu);
 void generic_mach_cpu_die(void);
 void generic_set_cpu_dead(unsigned int cpu);
+void generic_set_cpu_up(unsigned int cpu);
 int generic_check_cpu_restart(unsigned int cpu);
 #endif
 
@@ -190,6 +191,7 @@ extern unsigned long __secondary_hold_spinloop;
 extern unsigned long __secondary_hold_acknowledge;
 extern char __secondary_hold;
 
+extern void __early_start(void);
 #endif /* __ASSEMBLY__ */
 
 #endif /* __KERNEL__ */

arch/powerpc/include/asm/swiotlb.h

@@ -22,4 +22,10 @@ int __init swiotlb_setup_bus_notifier(void);
 
 extern void pci_dma_dev_setup_swiotlb(struct pci_dev *pdev);
 
+#ifdef CONFIG_SWIOTLB
+void swiotlb_detect_4g(void);
+#else
+static inline void swiotlb_detect_4g(void) {}
+#endif
+
 #endif /* __ASM_SWIOTLB_H */

arch/powerpc/kernel/cpu_setup_fsl_booke.S

@@ -16,6 +16,8 @@
 #include <asm/processor.h>
 #include <asm/cputable.h>
 #include <asm/ppc_asm.h>
+#include <asm/mmu-book3e.h>
+#include <asm/asm-offsets.h>
 
 _GLOBAL(__e500_icache_setup)
 	mfspr	r0, SPRN_L1CSR1
@@ -73,27 +75,81 @@ _GLOBAL(__setup_cpu_e500v2)
 	mtlr	r4
 	blr
 _GLOBAL(__setup_cpu_e500mc)
-	mr	r5, r4
-	mflr	r4
+_GLOBAL(__setup_cpu_e5500)
+	mflr	r5
 	bl	__e500_icache_setup
 	bl	__e500_dcache_setup
 	bl	__setup_e500mc_ivors
-	mtlr	r4
+	/*
+	 * We only want to touch IVOR38-41 if we're running on hardware
+	 * that supports category E.HV.  The architectural way to determine
+	 * this is MMUCFG[LPIDSIZE].
+	 */
+	mfspr	r3, SPRN_MMUCFG
+	rlwinm.	r3, r3, 0, MMUCFG_LPIDSIZE
+	beq	1f
+	bl	__setup_ehv_ivors
+	b	2f
+1:
+	lwz	r3, CPU_SPEC_FEATURES(r4)
+	/* We need this check as cpu_setup is also called for
+	 * the secondary cores. So, if we have already cleared
+	 * the feature on the primary core, avoid doing it on the
+	 * secondary core.
+	 */
+	andis.	r6, r3, CPU_FTR_EMB_HV@h
+	beq	2f
+	rlwinm	r3, r3, 0, ~CPU_FTR_EMB_HV
+	stw	r3, CPU_SPEC_FEATURES(r4)
+2:
+	mtlr	r5
 	blr
 #endif
-/* Right now, restore and setup are the same thing */
+
+#ifdef CONFIG_PPC_BOOK3E_64
 _GLOBAL(__restore_cpu_e5500)
-_GLOBAL(__setup_cpu_e5500)
 	mflr	r4
 	bl	__e500_icache_setup
 	bl	__e500_dcache_setup
-#ifdef CONFIG_PPC_BOOK3E_64
 	bl	.__setup_base_ivors
 	bl	.setup_perfmon_ivor
 	bl	.setup_doorbell_ivors
+	/*
+	 * We only want to touch IVOR38-41 if we're running on hardware
+	 * that supports category E.HV.  The architectural way to determine
+	 * this is MMUCFG[LPIDSIZE].
+	 */
+	mfspr	r10,SPRN_MMUCFG
+	rlwinm.	r10,r10,0,MMUCFG_LPIDSIZE
+	beq	1f
 	bl	.setup_ehv_ivors
-#else
-	bl	__setup_e500mc_ivors
-#endif
+1:
 	mtlr	r4
 	blr
+
+_GLOBAL(__setup_cpu_e5500)
+	mflr	r5
+	bl	__e500_icache_setup
+	bl	__e500_dcache_setup
+	bl	.__setup_base_ivors
+	bl	.setup_perfmon_ivor
+	bl	.setup_doorbell_ivors
+	/*
+	 * We only want to touch IVOR38-41 if we're running on hardware
+	 * that supports category E.HV.  The architectural way to determine
+	 * this is MMUCFG[LPIDSIZE].
+	 */
+	mfspr	r10,SPRN_MMUCFG
+	rlwinm.	r10,r10,0,MMUCFG_LPIDSIZE
+	beq	1f
+	bl	.setup_ehv_ivors
+	b	2f
+1:
+	ld	r10,CPU_SPEC_FEATURES(r4)
+	LOAD_REG_IMMEDIATE(r9,CPU_FTR_EMB_HV)
+	andc	r10,r10,r9
+	std	r10,CPU_SPEC_FEATURES(r4)
+2:
+	mtlr	r5
+	blr
+#endif

arch/powerpc/kernel/cputable.c

@@ -2016,7 +2016,9 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.oprofile_cpu_type	= "ppc/e500mc",
 		.oprofile_type		= PPC_OPROFILE_FSL_EMB,
 		.cpu_setup		= __setup_cpu_e5500,
+#ifndef CONFIG_PPC32
 		.cpu_restore		= __restore_cpu_e5500,
+#endif
 		.machine_check		= machine_check_e500mc,
 		.platform		= "ppce5500",
 	},
@@ -2034,7 +2036,9 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.oprofile_cpu_type	= "ppc/e6500",
 		.oprofile_type		= PPC_OPROFILE_FSL_EMB,
 		.cpu_setup		= __setup_cpu_e5500,
+#ifndef CONFIG_PPC32
 		.cpu_restore		= __restore_cpu_e5500,
+#endif
 		.machine_check		= machine_check_e500mc,
 		.platform		= "ppce6500",
 	},

arch/powerpc/kernel/dma-swiotlb.c

@@ -105,3 +105,23 @@ int __init swiotlb_setup_bus_notifier(void)
 			      &ppc_swiotlb_plat_bus_notifier);
 	return 0;
 }
+
+void swiotlb_detect_4g(void)
+{
+	if ((memblock_end_of_DRAM() - 1) > 0xffffffff)
+		ppc_swiotlb_enable = 1;
+}
+
+static int __init swiotlb_late_init(void)
+{
+	if (ppc_swiotlb_enable) {
+		swiotlb_print_info();
+		set_pci_dma_ops(&swiotlb_dma_ops);
+		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
+	} else {
+		swiotlb_free();
+	}
+
+	return 0;
+}
+subsys_initcall(swiotlb_late_init);

arch/powerpc/kernel/exceptions-64e.S

@@ -1356,25 +1356,11 @@ _GLOBAL(setup_perfmon_ivor)
 _GLOBAL(setup_doorbell_ivors)
 	SET_IVOR(36, 0x280) /* Processor Doorbell */
 	SET_IVOR(37, 0x2a0) /* Processor Doorbell Crit */
-
-	/* Check MMUCFG[LPIDSIZE] to determine if we have category E.HV */
-	mfspr	r10,SPRN_MMUCFG
-	rlwinm.	r10,r10,0,MMUCFG_LPIDSIZE
-	beqlr
-
-	SET_IVOR(38, 0x2c0) /* Guest Processor Doorbell */
-	SET_IVOR(39, 0x2e0) /* Guest Processor Doorbell Crit/MC */
 	blr
 
 _GLOBAL(setup_ehv_ivors)
-	/*
-	 * We may be running as a guest and lack E.HV even on a chip
-	 * that normally has it.
-	 */
-	mfspr	r10,SPRN_MMUCFG
-	rlwinm.	r10,r10,0,MMUCFG_LPIDSIZE
-	beqlr
-
 	SET_IVOR(40, 0x300) /* Embedded Hypervisor System Call */
 	SET_IVOR(41, 0x320) /* Embedded Hypervisor Privilege */
+	SET_IVOR(38, 0x2c0) /* Guest Processor Doorbell */
+	SET_IVOR(39, 0x2e0) /* Guest Processor Doorbell Crit/MC */
 	blr

arch/powerpc/kernel/head_fsl_booke.S

@@ -895,15 +895,11 @@ _GLOBAL(__setup_e500mc_ivors)
 	mtspr	SPRN_IVOR36,r3
 	li	r3,CriticalDoorbell@l
 	mtspr	SPRN_IVOR37,r3
+	sync
+	blr
 
-	/*
-	 * We only want to touch IVOR38-41 if we're running on hardware
-	 * that supports category E.HV.  The architectural way to determine
-	 * this is MMUCFG[LPIDSIZE].
-	 */
-	mfspr	r3, SPRN_MMUCFG
-	andis.	r3, r3, MMUCFG_LPIDSIZE@h
-	beq	no_hv
+/* setup ehv ivors for */
+_GLOBAL(__setup_ehv_ivors)
 	li	r3,GuestDoorbell@l
 	mtspr	SPRN_IVOR38,r3
 	li	r3,CriticalGuestDoorbell@l
@@ -912,14 +908,8 @@ _GLOBAL(__setup_e500mc_ivors)
 	mtspr	SPRN_IVOR40,r3
 	li	r3,Ehvpriv@l
 	mtspr	SPRN_IVOR41,r3
-skip_hv_ivors:
 	sync
 	blr
-no_hv:
-	lwz	r3, CPU_SPEC_FEATURES(r5)
-	rlwinm	r3, r3, 0, ~CPU_FTR_EMB_HV
-	stw	r3, CPU_SPEC_FEATURES(r5)
-	b	skip_hv_ivors
 
 #ifdef CONFIG_SPE
 /*
@@ -1043,6 +1033,34 @@ _GLOBAL(flush_dcache_L1)
 
 	blr
 
+/* Flush L1 d-cache, invalidate and disable d-cache and i-cache */
+_GLOBAL(__flush_disable_L1)
+	mflr	r10
+	bl	flush_dcache_L1	/* Flush L1 d-cache */
+	mtlr	r10
+
+	mfspr	r4, SPRN_L1CSR0	/* Invalidate and disable d-cache */
+	li	r5, 2
+	rlwimi	r4, r5, 0, 3
+
+	msync
+	isync
+	mtspr	SPRN_L1CSR0, r4
+	isync
+
+1:	mfspr	r4, SPRN_L1CSR0	/* Wait for the invalidate to finish */
+	andi.	r4, r4, 2
+	bne	1b
+
+	mfspr	r4, SPRN_L1CSR1	/* Invalidate and disable i-cache */
+	li	r5, 2
+	rlwimi	r4, r5, 0, 3
+
+	mtspr	SPRN_L1CSR1, r4
+	isync
+
+	blr
+
 #ifdef CONFIG_SMP
 /* When we get here, r24 needs to hold the CPU # */
 	.globl __secondary_start

arch/powerpc/kernel/smp.c

@@ -102,7 +102,7 @@ int __devinit smp_generic_kick_cpu(int nr)
 	 * Ok it's not there, so it might be soft-unplugged, let's
 	 * try to bring it back
 	 */
-	per_cpu(cpu_state, nr) = CPU_UP_PREPARE;
+	generic_set_cpu_up(nr);
 	smp_wmb();
 	smp_send_reschedule(nr);
 #endif /* CONFIG_HOTPLUG_CPU */
@@ -413,6 +413,16 @@ void generic_set_cpu_dead(unsigned int cpu)
 	per_cpu(cpu_state, cpu) = CPU_DEAD;
 }
 
+/*
+ * The cpu_state should be set to CPU_UP_PREPARE in kick_cpu(), otherwise
+ * the cpu_state is always CPU_DEAD after calling generic_set_cpu_dead(),
+ * which makes the delay in generic_cpu_die() not happen.
+ */
+void generic_set_cpu_up(unsigned int cpu)
+{
+	per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;
+}
+
 int generic_check_cpu_restart(unsigned int cpu)
 {
 	return per_cpu(cpu_state, cpu) == CPU_UP_PREPARE;

arch/powerpc/mm/mem.c

@@ -300,8 +300,7 @@ void __init mem_init(void)
 	unsigned long reservedpages = 0, codesize, initsize, datasize, bsssize;
 
 #ifdef CONFIG_SWIOTLB
-	if (ppc_swiotlb_enable)
-		swiotlb_init(1);
+	swiotlb_init(0);
 #endif
 
 	num_physpages = memblock_phys_mem_size() >> PAGE_SHIFT;

arch/powerpc/platforms/44x/currituck.c

@@ -21,7 +21,6 @@
  */
 
 #include <linux/init.h>
-#include <linux/memblock.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/rtc.h>
@@ -159,13 +158,8 @@ static void __init ppc47x_setup_arch(void)
 
 	/* No need to check the DMA config as we /know/ our windows are all of
  	 * RAM.  Lets hope that doesn't change */
-#ifdef CONFIG_SWIOTLB
-	if ((memblock_end_of_DRAM() - 1) > 0xffffffff) {
-		ppc_swiotlb_enable = 1;
-		set_pci_dma_ops(&swiotlb_dma_ops);
-		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
-	}
-#endif
+	swiotlb_detect_4g();
+
 	ppc47x_smp_init();
 }
 

arch/powerpc/platforms/85xx/Kconfig

@@ -104,6 +104,13 @@ config P1022_DS
 	help
 	  This option enables support for the Freescale P1022DS reference board.
 
+config P1022_RDK
+	bool "Freescale / iVeia P1022 RDK"
+	select DEFAULT_UIMAGE
+	help
+	  This option enables support for the Freescale / iVeia P1022RDK
+	  reference board.
+
 config P1023_RDS
 	bool "Freescale P1023 RDS"
 	select DEFAULT_UIMAGE
@@ -254,6 +261,20 @@ config P5020_DS
 	help
 	  This option enables support for the P5020 DS board
 
+config P5040_DS
+	bool "Freescale P5040 DS"
+	select DEFAULT_UIMAGE
+	select E500
+	select PPC_E500MC
+	select PHYS_64BIT
+	select SWIOTLB
+	select ARCH_REQUIRE_GPIOLIB
+	select GPIO_MPC8XXX
+	select HAS_RAPIDIO
+	select PPC_EPAPR_HV_PIC
+	help
+	  This option enables support for the P5040 DS board
+
 config PPC_QEMU_E500
 	bool "QEMU generic e500 platform"
 	depends on EXPERIMENTAL

arch/powerpc/platforms/85xx/Makefile

@@ -15,11 +15,13 @@ obj-$(CONFIG_MPC85xx_MDS) += mpc85xx_mds.o
 obj-$(CONFIG_MPC85xx_RDB) += mpc85xx_rdb.o
 obj-$(CONFIG_P1010_RDB)   += p1010rdb.o
 obj-$(CONFIG_P1022_DS)    += p1022_ds.o
+obj-$(CONFIG_P1022_RDK)   += p1022_rdk.o
 obj-$(CONFIG_P1023_RDS)   += p1023_rds.o
 obj-$(CONFIG_P2041_RDB)   += p2041_rdb.o corenet_ds.o
 obj-$(CONFIG_P3041_DS)    += p3041_ds.o corenet_ds.o
 obj-$(CONFIG_P4080_DS)    += p4080_ds.o corenet_ds.o
 obj-$(CONFIG_P5020_DS)    += p5020_ds.o corenet_ds.o
+obj-$(CONFIG_P5040_DS)    += p5040_ds.o corenet_ds.o
 obj-$(CONFIG_STX_GP3)	  += stx_gp3.o
 obj-$(CONFIG_TQM85xx)	  += tqm85xx.o
 obj-$(CONFIG_SBC8548)     += sbc8548.o

arch/powerpc/platforms/85xx/common.c

@@ -27,6 +27,16 @@ static struct of_device_id __initdata mpc85xx_common_ids[] = {
 	{ .compatible = "fsl,mpc8548-guts", },
 	/* Probably unnecessary? */
 	{ .compatible = "gpio-leds", },
+	/* For all PCI controllers */
+	{ .compatible = "fsl,mpc8540-pci", },
+	{ .compatible = "fsl,mpc8548-pcie", },
+	{ .compatible = "fsl,p1022-pcie", },
+	{ .compatible = "fsl,p1010-pcie", },
+	{ .compatible = "fsl,p1023-pcie", },
+	{ .compatible = "fsl,p4080-pcie", },
+	{ .compatible = "fsl,qoriq-pcie-v2.4", },
+	{ .compatible = "fsl,qoriq-pcie-v2.3", },
+	{ .compatible = "fsl,qoriq-pcie-v2.2", },
 	{},
 };
 

arch/powerpc/platforms/85xx/corenet_ds.c

@@ -16,7 +16,6 @@
 #include <linux/kdev_t.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
-#include <linux/memblock.h>
 
 #include <asm/time.h>
 #include <asm/machdep.h>
@@ -52,37 +51,16 @@ void __init corenet_ds_pic_init(void)
  */
 void __init corenet_ds_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-	struct pci_controller *hose;
-#endif
-	dma_addr_t max = 0xffffffff;
-
 	mpc85xx_smp_init();
 
-#ifdef CONFIG_PCI
-	for_each_node_by_type(np, "pci") {
-		if (of_device_is_compatible(np, "fsl,p4080-pcie") ||
-		    of_device_is_compatible(np, "fsl,qoriq-pcie-v2.2")) {
-			fsl_add_bridge(np, 0);
-			hose = pci_find_hose_for_OF_device(np);
-			max = min(max, hose->dma_window_base_cur +
-					hose->dma_window_size);
-		}
-	}
-
-#ifdef CONFIG_PPC64
+#if defined(CONFIG_PCI) && defined(CONFIG_PPC64)
 	pci_devs_phb_init();
 #endif
-#endif
 
-#ifdef CONFIG_SWIOTLB
-	if ((memblock_end_of_DRAM() - 1) > max) {
-		ppc_swiotlb_enable = 1;
-		set_pci_dma_ops(&swiotlb_dma_ops);
-		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
-	}
-#endif
+	fsl_pci_assign_primary();
+
+	swiotlb_detect_4g();
+
 	pr_info("%s board from Freescale Semiconductor\n", ppc_md.name);
 }
 
@@ -99,6 +77,12 @@ static const struct of_device_id of_device_ids[] __devinitconst = {
 	{
 		.compatible	= "fsl,qoriq-pcie-v2.2",
 	},
+	{
+		.compatible	= "fsl,qoriq-pcie-v2.3",
+	},
+	{
+		.compatible	= "fsl,qoriq-pcie-v2.4",
+	},
 	/* The following two are for the Freescale hypervisor */
 	{
 		.name		= "hypervisor",

arch/powerpc/platforms/85xx/ge_imp3a.c

@@ -22,7 +22,6 @@
 #include <linux/seq_file.h>
 #include <linux/interrupt.h>
 #include <linux/of_platform.h>
-#include <linux/memblock.h>
 
 #include <asm/time.h>
 #include <asm/machdep.h>
@@ -84,53 +83,39 @@ void __init ge_imp3a_pic_init(void)
 	of_node_put(cascade_node);
 }
 
-#ifdef CONFIG_PCI
-static int primary_phb_addr;
-#endif	/* CONFIG_PCI */
-
-/*
- * Setup the architecture
- */
-static void __init ge_imp3a_setup_arch(void)
+static void ge_imp3a_pci_assign_primary(void)
 {
-	struct device_node *regs;
 #ifdef CONFIG_PCI
 	struct device_node *np;
-	struct pci_controller *hose;
-#endif
-	dma_addr_t max = 0xffffffff;
+	struct resource rsrc;
 
-	if (ppc_md.progress)
-		ppc_md.progress("ge_imp3a_setup_arch()", 0);
-
-#ifdef CONFIG_PCI
 	for_each_node_by_type(np, "pci") {
 		if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
 		    of_device_is_compatible(np, "fsl,mpc8548-pcie") ||
 		    of_device_is_compatible(np, "fsl,p2020-pcie")) {
-			struct resource rsrc;
 			of_address_to_resource(np, 0, &rsrc);
-			if ((rsrc.start & 0xfffff) == primary_phb_addr)
-				fsl_add_bridge(np, 1);
-			else
-				fsl_add_bridge(np, 0);
-
-			hose = pci_find_hose_for_OF_device(np);
-			max = min(max, hose->dma_window_base_cur +
-					hose->dma_window_size);
+			if ((rsrc.start & 0xfffff) == 0x9000)
+				fsl_pci_primary = np;
 		}
 	}
 #endif
+}
+
+/*
+ * Setup the architecture
+ */
+static void __init ge_imp3a_setup_arch(void)
+{
+	struct device_node *regs;
+
+	if (ppc_md.progress)
+		ppc_md.progress("ge_imp3a_setup_arch()", 0);
 
 	mpc85xx_smp_init();
 
-#ifdef CONFIG_SWIOTLB
-	if ((memblock_end_of_DRAM() - 1) > max) {
-		ppc_swiotlb_enable = 1;
-		set_pci_dma_ops(&swiotlb_dma_ops);
-		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
-	}
-#endif
+	ge_imp3a_pci_assign_primary();
+
+	swiotlb_detect_4g();
 
 	/* Remap basic board registers */
 	regs = of_find_compatible_node(NULL, NULL, "ge,imp3a-fpga-regs");
@@ -215,17 +200,10 @@ static int __init ge_imp3a_probe(void)
 {
 	unsigned long root = of_get_flat_dt_root();
 
-	if (of_flat_dt_is_compatible(root, "ge,IMP3A")) {
-#ifdef CONFIG_PCI
-		primary_phb_addr = 0x9000;
-#endif
-		return 1;
-	}
-
-	return 0;
+	return of_flat_dt_is_compatible(root, "ge,IMP3A");
 }
 
-machine_device_initcall(ge_imp3a, mpc85xx_common_publish_devices);
+machine_arch_initcall(ge_imp3a, mpc85xx_common_publish_devices);
 
 machine_arch_initcall(ge_imp3a, swiotlb_setup_bus_notifier);
 

arch/powerpc/platforms/85xx/mpc8536_ds.c

@@ -17,7 +17,6 @@
 #include <linux/seq_file.h>
 #include <linux/interrupt.h>
 #include <linux/of_platform.h>
-#include <linux/memblock.h>
 
 #include <asm/time.h>
 #include <asm/machdep.h>
@@ -46,46 +45,17 @@ void __init mpc8536_ds_pic_init(void)
  */
 static void __init mpc8536_ds_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-	struct pci_controller *hose;
-#endif
-	dma_addr_t max = 0xffffffff;
-
 	if (ppc_md.progress)
 		ppc_md.progress("mpc8536_ds_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	for_each_node_by_type(np, "pci") {
-		if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
-		    of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
-			struct resource rsrc;
-			of_address_to_resource(np, 0, &rsrc);
-			if ((rsrc.start & 0xfffff) == 0x8000)
-				fsl_add_bridge(np, 1);
-			else
-				fsl_add_bridge(np, 0);
-
-			hose = pci_find_hose_for_OF_device(np);
-			max = min(max, hose->dma_window_base_cur +
-					hose->dma_window_size);
-		}
-	}
-
-#endif
+	fsl_pci_assign_primary();
 
-#ifdef CONFIG_SWIOTLB
-	if ((memblock_end_of_DRAM() - 1) > max) {
-		ppc_swiotlb_enable = 1;
-		set_pci_dma_ops(&swiotlb_dma_ops);
-		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
-	}
-#endif
+	swiotlb_detect_4g();
 
 	printk("MPC8536 DS board from Freescale Semiconductor\n");
 }
 
-machine_device_initcall(mpc8536_ds, mpc85xx_common_publish_devices);
+machine_arch_initcall(mpc8536_ds, mpc85xx_common_publish_devices);
 
 machine_arch_initcall(mpc8536_ds, swiotlb_setup_bus_notifier);
 

arch/powerpc/platforms/85xx/mpc85xx_ads.c

@@ -137,10 +137,6 @@ static void __init init_ioports(void)
 
 static void __init mpc85xx_ads_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-#endif
-
 	if (ppc_md.progress)
 		ppc_md.progress("mpc85xx_ads_setup_arch()", 0);
 
@@ -150,11 +146,10 @@ static void __init mpc85xx_ads_setup_arch(void)
 #endif
 
 #ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,mpc8540-pci")
-		fsl_add_bridge(np, 1);
-
 	ppc_md.pci_exclude_device = mpc85xx_exclude_device;
 #endif
+
+	fsl_pci_assign_primary();
 }
 
 static void mpc85xx_ads_show_cpuinfo(struct seq_file *m)
@@ -173,7 +168,7 @@ static void mpc85xx_ads_show_cpuinfo(struct seq_file *m)
 	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
 }
 
-machine_device_initcall(mpc85xx_ads, mpc85xx_common_publish_devices);
+machine_arch_initcall(mpc85xx_ads, mpc85xx_common_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened

arch/powerpc/platforms/85xx/mpc85xx_cds.c

@@ -276,6 +276,33 @@ machine_device_initcall(mpc85xx_cds, mpc85xx_cds_8259_attach);
 
 #endif /* CONFIG_PPC_I8259 */
 
+static void mpc85xx_cds_pci_assign_primary(void)
+{
+#ifdef CONFIG_PCI
+	struct device_node *np;
+
+	if (fsl_pci_primary)
+		return;
+
+	/*
+	 * MPC85xx_CDS has ISA bridge but unfortunately there is no
+	 * isa node in device tree. We now looking for i8259 node as
+	 * a workaround for such a broken device tree. This routine
+	 * is for complying to all device trees.
+	 */
+	np = of_find_node_by_name(NULL, "i8259");
+	while ((fsl_pci_primary = of_get_parent(np))) {
+		of_node_put(np);
+		np = fsl_pci_primary;
+
+		if ((of_device_is_compatible(np, "fsl,mpc8540-pci") ||
+		    of_device_is_compatible(np, "fsl,mpc8548-pcie")) &&
+		    of_device_is_available(np))
+			return;
+	}
+#endif
+}
+
 /*
  * Setup the architecture
  */
@@ -309,21 +336,12 @@ static void __init mpc85xx_cds_setup_arch(void)
 	}
 
 #ifdef CONFIG_PCI
-	for_each_node_by_type(np, "pci") {
-		if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
-		    of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
-			struct resource rsrc;
-			of_address_to_resource(np, 0, &rsrc);
-			if ((rsrc.start & 0xfffff) == 0x8000)
-				fsl_add_bridge(np, 1);
-			else
-				fsl_add_bridge(np, 0);
-		}
-	}
-
 	ppc_md.pci_irq_fixup = mpc85xx_cds_pci_irq_fixup;
 	ppc_md.pci_exclude_device = mpc85xx_exclude_device;
 #endif
+
+	mpc85xx_cds_pci_assign_primary();
+	fsl_pci_assign_primary();
 }
 
 static void mpc85xx_cds_show_cpuinfo(struct seq_file *m)
@@ -355,7 +373,7 @@ static int __init mpc85xx_cds_probe(void)
         return of_flat_dt_is_compatible(root, "MPC85xxCDS");
 }
 
-machine_device_initcall(mpc85xx_cds, mpc85xx_common_publish_devices);
+machine_arch_initcall(mpc85xx_cds, mpc85xx_common_publish_devices);
 
 define_machine(mpc85xx_cds) {
 	.name		= "MPC85xx CDS",

arch/powerpc/platforms/85xx/mpc85xx_ds.c

@@ -20,7 +20,6 @@
 #include <linux/seq_file.h>
 #include <linux/interrupt.h>
 #include <linux/of_platform.h>
-#include <linux/memblock.h>
 
 #include <asm/time.h>
 #include <asm/machdep.h>
@@ -129,13 +128,11 @@ static int mpc85xx_exclude_device(struct pci_controller *hose,
 }
 #endif	/* CONFIG_PCI */
 
-static void __init mpc85xx_ds_pci_init(void)
+static void __init mpc85xx_ds_uli_init(void)
 {
 #ifdef CONFIG_PCI
 	struct device_node *node;
 
-	fsl_pci_init();
-
 	/* See if we have a ULI under the primary */
 
 	node = of_find_node_by_name(NULL, "uli1575");
@@ -159,7 +156,9 @@ static void __init mpc85xx_ds_setup_arch(void)
 	if (ppc_md.progress)
 		ppc_md.progress("mpc85xx_ds_setup_arch()", 0);
 
-	mpc85xx_ds_pci_init();
+	swiotlb_detect_4g();
+	fsl_pci_assign_primary();
+	mpc85xx_ds_uli_init();
 	mpc85xx_smp_init();
 
 	printk("MPC85xx DS board from Freescale Semiconductor\n");
@@ -175,9 +174,9 @@ static int __init mpc8544_ds_probe(void)
 	return !!of_flat_dt_is_compatible(root, "MPC8544DS");
 }
 
-machine_device_initcall(mpc8544_ds, mpc85xx_common_publish_devices);
-machine_device_initcall(mpc8572_ds, mpc85xx_common_publish_devices);
-machine_device_initcall(p2020_ds, mpc85xx_common_publish_devices);
+machine_arch_initcall(mpc8544_ds, mpc85xx_common_publish_devices);
+machine_arch_initcall(mpc8572_ds, mpc85xx_common_publish_devices);
+machine_arch_initcall(p2020_ds, mpc85xx_common_publish_devices);
 
 machine_arch_initcall(mpc8544_ds, swiotlb_setup_bus_notifier);
 machine_arch_initcall(mpc8572_ds, swiotlb_setup_bus_notifier);

arch/powerpc/platforms/85xx/mpc85xx_mds.c

@@ -327,44 +327,16 @@ static void __init mpc85xx_mds_qeic_init(void) { }
 
 static void __init mpc85xx_mds_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct pci_controller *hose;
-	struct device_node *np;
-#endif
-	dma_addr_t max = 0xffffffff;
-
 	if (ppc_md.progress)
 		ppc_md.progress("mpc85xx_mds_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	for_each_node_by_type(np, "pci") {
-		if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
-		    of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
-			struct resource rsrc;
-			of_address_to_resource(np, 0, &rsrc);
-			if ((rsrc.start & 0xfffff) == 0x8000)
-				fsl_add_bridge(np, 1);
-			else
-				fsl_add_bridge(np, 0);
-
-			hose = pci_find_hose_for_OF_device(np);
-			max = min(max, hose->dma_window_base_cur +
-					hose->dma_window_size);
-		}
-	}
-#endif
-
 	mpc85xx_smp_init();
 
 	mpc85xx_mds_qe_init();
 
-#ifdef CONFIG_SWIOTLB
-	if ((memblock_end_of_DRAM() - 1) > max) {
-		ppc_swiotlb_enable = 1;
-		set_pci_dma_ops(&swiotlb_dma_ops);
-		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
-	}
-#endif
+	fsl_pci_assign_primary();
+
+	swiotlb_detect_4g();
 }
 
 
@@ -409,9 +381,9 @@ static int __init mpc85xx_publish_devices(void)
 	return mpc85xx_common_publish_devices();
 }
 
-machine_device_initcall(mpc8568_mds, mpc85xx_publish_devices);
-machine_device_initcall(mpc8569_mds, mpc85xx_publish_devices);
-machine_device_initcall(p1021_mds, mpc85xx_common_publish_devices);
+machine_arch_initcall(mpc8568_mds, mpc85xx_publish_devices);
+machine_arch_initcall(mpc8569_mds, mpc85xx_publish_devices);
+machine_arch_initcall(p1021_mds, mpc85xx_common_publish_devices);
 
 machine_arch_initcall(mpc8568_mds, swiotlb_setup_bus_notifier);
 machine_arch_initcall(mpc8569_mds, swiotlb_setup_bus_notifier);

arch/powerpc/platforms/85xx/mpc85xx_rdb.c

@@ -86,23 +86,17 @@ void __init mpc85xx_rdb_pic_init(void)
  */
 static void __init mpc85xx_rdb_setup_arch(void)
 {
-#if defined(CONFIG_PCI) || defined(CONFIG_QUICC_ENGINE)
+#ifdef CONFIG_QUICC_ENGINE
 	struct device_node *np;
 #endif
 
 	if (ppc_md.progress)
 		ppc_md.progress("mpc85xx_rdb_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	for_each_node_by_type(np, "pci") {
-		if (of_device_is_compatible(np, "fsl,mpc8548-pcie"))
-			fsl_add_bridge(np, 0);
-	}
-
-#endif
-
 	mpc85xx_smp_init();
 
+	fsl_pci_assign_primary();
+
 #ifdef CONFIG_QUICC_ENGINE
 	np = of_find_compatible_node(NULL, NULL, "fsl,qe");
 	if (!np) {
@@ -161,15 +155,15 @@ qe_fail:
 	printk(KERN_INFO "MPC85xx RDB board from Freescale Semiconductor\n");
 }
 
-machine_device_initcall(p2020_rdb, mpc85xx_common_publish_devices);
-machine_device_initcall(p2020_rdb_pc, mpc85xx_common_publish_devices);
-machine_device_initcall(p1020_mbg_pc, mpc85xx_common_publish_devices);
-machine_device_initcall(p1020_rdb, mpc85xx_common_publish_devices);
-machine_device_initcall(p1020_rdb_pc, mpc85xx_common_publish_devices);
-machine_device_initcall(p1020_utm_pc, mpc85xx_common_publish_devices);
-machine_device_initcall(p1021_rdb_pc, mpc85xx_common_publish_devices);
-machine_device_initcall(p1025_rdb, mpc85xx_common_publish_devices);
-machine_device_initcall(p1024_rdb, mpc85xx_common_publish_devices);
+machine_arch_initcall(p2020_rdb, mpc85xx_common_publish_devices);
+machine_arch_initcall(p2020_rdb_pc, mpc85xx_common_publish_devices);
+machine_arch_initcall(p1020_mbg_pc, mpc85xx_common_publish_devices);
+machine_arch_initcall(p1020_rdb, mpc85xx_common_publish_devices);
+machine_arch_initcall(p1020_rdb_pc, mpc85xx_common_publish_devices);
+machine_arch_initcall(p1020_utm_pc, mpc85xx_common_publish_devices);
+machine_arch_initcall(p1021_rdb_pc, mpc85xx_common_publish_devices);
+machine_arch_initcall(p1025_rdb, mpc85xx_common_publish_devices);
+machine_arch_initcall(p1024_rdb, mpc85xx_common_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened

arch/powerpc/platforms/85xx/p1010rdb.c

@@ -46,25 +46,15 @@ void __init p1010_rdb_pic_init(void)
  */
 static void __init p1010_rdb_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-#endif
-
 	if (ppc_md.progress)
 		ppc_md.progress("p1010_rdb_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	for_each_node_by_type(np, "pci") {
-		if (of_device_is_compatible(np, "fsl,p1010-pcie"))
-			fsl_add_bridge(np, 0);
-	}
-
-#endif
+	fsl_pci_assign_primary();
 
 	printk(KERN_INFO "P1010 RDB board from Freescale Semiconductor\n");
 }
 
-machine_device_initcall(p1010_rdb, mpc85xx_common_publish_devices);
+machine_arch_initcall(p1010_rdb, mpc85xx_common_publish_devices);
 machine_arch_initcall(p1010_rdb, swiotlb_setup_bus_notifier);
 
 /*

arch/powerpc/platforms/85xx/p1022_ds.c

@@ -18,7 +18,6 @@
 
 #include <linux/pci.h>
 #include <linux/of_platform.h>
-#include <linux/memblock.h>
 #include <asm/div64.h>
 #include <asm/mpic.h>
 #include <asm/swiotlb.h>
@@ -507,32 +506,9 @@ early_param("video", early_video_setup);
  */
 static void __init p1022_ds_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-#endif
-	dma_addr_t max = 0xffffffff;
-
 	if (ppc_md.progress)
 		ppc_md.progress("p1022_ds_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,p1022-pcie") {
-		struct resource rsrc;
-		struct pci_controller *hose;
-
-		of_address_to_resource(np, 0, &rsrc);
-
-		if ((rsrc.start & 0xfffff) == 0x8000)
-			fsl_add_bridge(np, 1);
-		else
-			fsl_add_bridge(np, 0);
-
-		hose = pci_find_hose_for_OF_device(np);
-		max = min(max, hose->dma_window_base_cur +
-			  hose->dma_window_size);
-	}
-#endif
-
 #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
 	diu_ops.get_pixel_format	= p1022ds_get_pixel_format;
 	diu_ops.set_gamma_table		= p1022ds_set_gamma_table;
@@ -601,18 +577,14 @@ static void __init p1022_ds_setup_arch(void)
 
 	mpc85xx_smp_init();
 
-#ifdef CONFIG_SWIOTLB
-	if ((memblock_end_of_DRAM() - 1) > max) {
-		ppc_swiotlb_enable = 1;
-		set_pci_dma_ops(&swiotlb_dma_ops);
-		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
-	}
-#endif
+	fsl_pci_assign_primary();
+
+	swiotlb_detect_4g();
 
 	pr_info("Freescale P1022 DS reference board\n");
 }
 
-machine_device_initcall(p1022_ds, mpc85xx_common_publish_devices);
+machine_arch_initcall(p1022_ds, mpc85xx_common_publish_devices);
 
 machine_arch_initcall(p1022_ds, swiotlb_setup_bus_notifier);
 

arch/powerpc/platforms/85xx/p1022_rdk.c

@@ -0,0 +1,167 @@
+/*
+ * P1022 RDK board specific routines
+ *
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * Author: Timur Tabi <timur@freescale.com>
+ *
+ * Based on p1022_ds.c
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/pci.h>
+#include <linux/of_platform.h>
+#include <asm/div64.h>
+#include <asm/mpic.h>
+#include <asm/swiotlb.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+#include <asm/udbg.h>
+#include <asm/fsl_guts.h>
+#include "smp.h"
+
+#include "mpc85xx.h"
+
+#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
+
+/* DIU Pixel Clock bits of the CLKDVDR Global Utilities register */
+#define CLKDVDR_PXCKEN		0x80000000
+#define CLKDVDR_PXCKINV		0x10000000
+#define CLKDVDR_PXCKDLY		0x06000000
+#define CLKDVDR_PXCLK_MASK	0x00FF0000
+
+/**
+ * p1022rdk_set_monitor_port: switch the output to a different monitor port
+ */
+static void p1022rdk_set_monitor_port(enum fsl_diu_monitor_port port)
+{
+	if (port != FSL_DIU_PORT_DVI) {
+		pr_err("p1022rdk: unsupported monitor port %i\n", port);
+		return;
+	}
+}
+
+/**
+ * p1022rdk_set_pixel_clock: program the DIU's clock
+ *
+ * @pixclock: the wavelength, in picoseconds, of the clock
+ */
+void p1022rdk_set_pixel_clock(unsigned int pixclock)
+{
+	struct device_node *guts_np = NULL;
+	struct ccsr_guts __iomem *guts;
+	unsigned long freq;
+	u64 temp;
+	u32 pxclk;
+
+	/* Map the global utilities registers. */
+	guts_np = of_find_compatible_node(NULL, NULL, "fsl,p1022-guts");
+	if (!guts_np) {
+		pr_err("p1022rdk: missing global utilties device node\n");
+		return;
+	}
+
+	guts = of_iomap(guts_np, 0);
+	of_node_put(guts_np);
+	if (!guts) {
+		pr_err("p1022rdk: could not map global utilties device\n");
+		return;
+	}
+
+	/* Convert pixclock from a wavelength to a frequency */
+	temp = 1000000000000ULL;
+	do_div(temp, pixclock);
+	freq = temp;
+
+	/*
+	 * 'pxclk' is the ratio of the platform clock to the pixel clock.
+	 * This number is programmed into the CLKDVDR register, and the valid
+	 * range of values is 2-255.
+	 */
+	pxclk = DIV_ROUND_CLOSEST(fsl_get_sys_freq(), freq);
+	pxclk = clamp_t(u32, pxclk, 2, 255);
+
+	/* Disable the pixel clock, and set it to non-inverted and no delay */
+	clrbits32(&guts->clkdvdr,
+		  CLKDVDR_PXCKEN | CLKDVDR_PXCKDLY | CLKDVDR_PXCLK_MASK);
+
+	/* Enable the clock and set the pxclk */
+	setbits32(&guts->clkdvdr, CLKDVDR_PXCKEN | (pxclk << 16));
+
+	iounmap(guts);
+}
+
+/**
+ * p1022rdk_valid_monitor_port: set the monitor port for sysfs
+ */
+enum fsl_diu_monitor_port
+p1022rdk_valid_monitor_port(enum fsl_diu_monitor_port port)
+{
+	return FSL_DIU_PORT_DVI;
+}
+
+#endif
+
+void __init p1022_rdk_pic_init(void)
+{
+	struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
+		MPIC_SINGLE_DEST_CPU,
+		0, 256, " OpenPIC  ");
+	BUG_ON(mpic == NULL);
+	mpic_init(mpic);
+}
+
+/*
+ * Setup the architecture
+ */
+static void __init p1022_rdk_setup_arch(void)
+{
+	if (ppc_md.progress)
+		ppc_md.progress("p1022_rdk_setup_arch()", 0);
+
+#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
+	diu_ops.set_monitor_port	= p1022rdk_set_monitor_port;
+	diu_ops.set_pixel_clock		= p1022rdk_set_pixel_clock;
+	diu_ops.valid_monitor_port	= p1022rdk_valid_monitor_port;
+#endif
+
+	mpc85xx_smp_init();
+
+	fsl_pci_assign_primary();
+
+	swiotlb_detect_4g();
+
+	pr_info("Freescale / iVeia P1022 RDK reference board\n");
+}
+
+machine_arch_initcall(p1022_rdk, mpc85xx_common_publish_devices);
+
+machine_arch_initcall(p1022_rdk, swiotlb_setup_bus_notifier);
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init p1022_rdk_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(root, "fsl,p1022rdk");
+}
+
+define_machine(p1022_rdk) {
+	.name			= "P1022 RDK",
+	.probe			= p1022_rdk_probe,
+	.setup_arch		= p1022_rdk_setup_arch,
+	.init_IRQ		= p1022_rdk_pic_init,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+	.get_irq		= mpic_get_irq,
+	.restart		= fsl_rstcr_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};

arch/powerpc/platforms/85xx/p1023_rds.c

@@ -80,15 +80,12 @@ static void __init mpc85xx_rds_setup_arch(void)
 		}
 	}
 
-#ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,p1023-pcie")
-		fsl_add_bridge(np, 0);
-#endif
-
 	mpc85xx_smp_init();
+
+	fsl_pci_assign_primary();
 }
 
-machine_device_initcall(p1023_rds, mpc85xx_common_publish_devices);
+machine_arch_initcall(p1023_rds, mpc85xx_common_publish_devices);
 
 static void __init mpc85xx_rds_pic_init(void)
 {

arch/powerpc/platforms/85xx/p2041_rdb.c

@@ -80,7 +80,7 @@ define_machine(p2041_rdb) {
 	.power_save		= e500_idle,
 };
 
-machine_device_initcall(p2041_rdb, corenet_ds_publish_devices);
+machine_arch_initcall(p2041_rdb, corenet_ds_publish_devices);
 
 #ifdef CONFIG_SWIOTLB
 machine_arch_initcall(p2041_rdb, swiotlb_setup_bus_notifier);

arch/powerpc/platforms/85xx/p3041_ds.c

@@ -82,7 +82,7 @@ define_machine(p3041_ds) {
 	.power_save		= e500_idle,
 };
 
-machine_device_initcall(p3041_ds, corenet_ds_publish_devices);
+machine_arch_initcall(p3041_ds, corenet_ds_publish_devices);
 
 #ifdef CONFIG_SWIOTLB
 machine_arch_initcall(p3041_ds, swiotlb_setup_bus_notifier);

arch/powerpc/platforms/85xx/p4080_ds.c

@@ -81,7 +81,7 @@ define_machine(p4080_ds) {
 	.power_save		= e500_idle,
 };
 
-machine_device_initcall(p4080_ds, corenet_ds_publish_devices);
+machine_arch_initcall(p4080_ds, corenet_ds_publish_devices);
 #ifdef CONFIG_SWIOTLB
 machine_arch_initcall(p4080_ds, swiotlb_setup_bus_notifier);
 #endif

arch/powerpc/platforms/85xx/p5020_ds.c

@@ -91,7 +91,7 @@ define_machine(p5020_ds) {
 #endif
 };
 
-machine_device_initcall(p5020_ds, corenet_ds_publish_devices);
+machine_arch_initcall(p5020_ds, corenet_ds_publish_devices);
 
 #ifdef CONFIG_SWIOTLB
 machine_arch_initcall(p5020_ds, swiotlb_setup_bus_notifier);

arch/powerpc/platforms/85xx/p5040_ds.c

@@ -0,0 +1,89 @@
+/*
+ * P5040 DS Setup
+ *
+ * Copyright 2009-2010 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+
+#include <asm/machdep.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+
+#include <linux/of_fdt.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+#include <asm/ehv_pic.h>
+
+#include "corenet_ds.h"
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init p5040_ds_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+#ifdef CONFIG_SMP
+	extern struct smp_ops_t smp_85xx_ops;
+#endif
+
+	if (of_flat_dt_is_compatible(root, "fsl,P5040DS"))
+		return 1;
+
+	/* Check if we're running under the Freescale hypervisor */
+	if (of_flat_dt_is_compatible(root, "fsl,P5040DS-hv")) {
+		ppc_md.init_IRQ = ehv_pic_init;
+		ppc_md.get_irq = ehv_pic_get_irq;
+		ppc_md.restart = fsl_hv_restart;
+		ppc_md.power_off = fsl_hv_halt;
+		ppc_md.halt = fsl_hv_halt;
+#ifdef CONFIG_SMP
+		/*
+		 * Disable the timebase sync operations because we can't write
+		 * to the timebase registers under the hypervisor.
+		  */
+		smp_85xx_ops.give_timebase = NULL;
+		smp_85xx_ops.take_timebase = NULL;
+#endif
+		return 1;
+	}
+
+	return 0;
+}
+
+define_machine(p5040_ds) {
+	.name			= "P5040 DS",
+	.probe			= p5040_ds_probe,
+	.setup_arch		= corenet_ds_setup_arch,
+	.init_IRQ		= corenet_ds_pic_init,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+/* coreint doesn't play nice with lazy EE, use legacy mpic for now */
+#ifdef CONFIG_PPC64
+	.get_irq		= mpic_get_irq,
+#else
+	.get_irq		= mpic_get_coreint_irq,
+#endif
+	.restart		= fsl_rstcr_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+#ifdef CONFIG_PPC64
+	.power_save		= book3e_idle,
+#else
+	.power_save		= e500_idle,
+#endif
+};
+
+machine_arch_initcall(p5040_ds, corenet_ds_publish_devices);
+
+#ifdef CONFIG_SWIOTLB
+machine_arch_initcall(p5040_ds, swiotlb_setup_bus_notifier);
+#endif

arch/powerpc/platforms/85xx/qemu_e500.c

@@ -41,7 +41,8 @@ static void __init qemu_e500_setup_arch(void)
 {
 	ppc_md.progress("qemu_e500_setup_arch()", 0);
 
-	fsl_pci_init();
+	fsl_pci_assign_primary();
+	swiotlb_detect_4g();
 	mpc85xx_smp_init();
 }
 
@@ -55,7 +56,7 @@ static int __init qemu_e500_probe(void)
 	return !!of_flat_dt_is_compatible(root, "fsl,qemu-e500");
 }
 
-machine_device_initcall(qemu_e500, mpc85xx_common_publish_devices);
+machine_arch_initcall(qemu_e500, mpc85xx_common_publish_devices);
 
 define_machine(qemu_e500) {
 	.name			= "QEMU e500",

arch/powerpc/platforms/85xx/sbc8548.c

@@ -88,26 +88,11 @@ static int __init sbc8548_hw_rev(void)
  */
 static void __init sbc8548_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-#endif
-
 	if (ppc_md.progress)
 		ppc_md.progress("sbc8548_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	for_each_node_by_type(np, "pci") {
-		if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
-		    of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
-			struct resource rsrc;
-			of_address_to_resource(np, 0, &rsrc);
-			if ((rsrc.start & 0xfffff) == 0x8000)
-				fsl_add_bridge(np, 1);
-			else
-				fsl_add_bridge(np, 0);
-		}
-	}
-#endif
+	fsl_pci_assign_primary();
+
 	sbc_rev = sbc8548_hw_rev();
 }
 
@@ -128,7 +113,7 @@ static void sbc8548_show_cpuinfo(struct seq_file *m)
 	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
 }
 
-machine_device_initcall(sbc8548, mpc85xx_common_publish_devices);
+machine_arch_initcall(sbc8548, mpc85xx_common_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened

arch/powerpc/platforms/85xx/smp.c

@@ -2,7 +2,7 @@
  * Author: Andy Fleming <afleming@freescale.com>
  * 	   Kumar Gala <galak@kernel.crashing.org>
  *
- * Copyright 2006-2008, 2011 Freescale Semiconductor Inc.
+ * Copyright 2006-2008, 2011-2012 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -17,6 +17,7 @@
 #include <linux/of.h>
 #include <linux/kexec.h>
 #include <linux/highmem.h>
+#include <linux/cpu.h>
 
 #include <asm/machdep.h>
 #include <asm/pgtable.h>
@@ -24,33 +25,118 @@
 #include <asm/mpic.h>
 #include <asm/cacheflush.h>
 #include <asm/dbell.h>
+#include <asm/fsl_guts.h>
 
 #include <sysdev/fsl_soc.h>
 #include <sysdev/mpic.h>
 #include "smp.h"
 
-extern void __early_start(void);
-
-#define BOOT_ENTRY_ADDR_UPPER	0
-#define BOOT_ENTRY_ADDR_LOWER	1
-#define BOOT_ENTRY_R3_UPPER	2
-#define BOOT_ENTRY_R3_LOWER	3
-#define BOOT_ENTRY_RESV		4
-#define BOOT_ENTRY_PIR		5
-#define BOOT_ENTRY_R6_UPPER	6
-#define BOOT_ENTRY_R6_LOWER	7
-#define NUM_BOOT_ENTRY		8
-#define SIZE_BOOT_ENTRY		(NUM_BOOT_ENTRY * sizeof(u32))
-
-static int __init
-smp_85xx_kick_cpu(int nr)
+struct epapr_spin_table {
+	u32	addr_h;
+	u32	addr_l;
+	u32	r3_h;
+	u32	r3_l;
+	u32	reserved;
+	u32	pir;
+};
+
+static struct ccsr_guts __iomem *guts;
+static u64 timebase;
+static int tb_req;
+static int tb_valid;
+
+static void mpc85xx_timebase_freeze(int freeze)
+{
+	uint32_t mask;
+
+	mask = CCSR_GUTS_DEVDISR_TB0 | CCSR_GUTS_DEVDISR_TB1;
+	if (freeze)
+		setbits32(&guts->devdisr, mask);
+	else
+		clrbits32(&guts->devdisr, mask);
+
+	in_be32(&guts->devdisr);
+}
+
+static void mpc85xx_give_timebase(void)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	while (!tb_req)
+		barrier();
+	tb_req = 0;
+
+	mpc85xx_timebase_freeze(1);
+	timebase = get_tb();
+	mb();
+	tb_valid = 1;
+
+	while (tb_valid)
+		barrier();
+
+	mpc85xx_timebase_freeze(0);
+
+	local_irq_restore(flags);
+}
+
+static void mpc85xx_take_timebase(void)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	tb_req = 1;
+	while (!tb_valid)
+		barrier();
+
+	set_tb(timebase >> 32, timebase & 0xffffffff);
+	isync();
+	tb_valid = 0;
+
+	local_irq_restore(flags);
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+static void __cpuinit smp_85xx_mach_cpu_die(void)
+{
+	unsigned int cpu = smp_processor_id();
+	u32 tmp;
+
+	local_irq_disable();
+	idle_task_exit();
+	generic_set_cpu_dead(cpu);
+	mb();
+
+	mtspr(SPRN_TCR, 0);
+
+	__flush_disable_L1();
+	tmp = (mfspr(SPRN_HID0) & ~(HID0_DOZE|HID0_SLEEP)) | HID0_NAP;
+	mtspr(SPRN_HID0, tmp);
+	isync();
+
+	/* Enter NAP mode. */
+	tmp = mfmsr();
+	tmp |= MSR_WE;
+	mb();
+	mtmsr(tmp);
+	isync();
+
+	while (1)
+		;
+}
+#endif
+
+static int __cpuinit smp_85xx_kick_cpu(int nr)
 {
 	unsigned long flags;
 	const u64 *cpu_rel_addr;
-	__iomem u32 *bptr_vaddr;
+	__iomem struct epapr_spin_table *spin_table;
 	struct device_node *np;
-	int n = 0, hw_cpu = get_hard_smp_processor_id(nr);
+	int hw_cpu = get_hard_smp_processor_id(nr);
 	int ioremappable;
+	int ret = 0;
 
 	WARN_ON(nr < 0 || nr >= NR_CPUS);
 	WARN_ON(hw_cpu < 0 || hw_cpu >= NR_CPUS);
@@ -75,46 +161,81 @@ smp_85xx_kick_cpu(int nr)
 
 	/* Map the spin table */
 	if (ioremappable)
-		bptr_vaddr = ioremap(*cpu_rel_addr, SIZE_BOOT_ENTRY);
+		spin_table = ioremap(*cpu_rel_addr,
+				sizeof(struct epapr_spin_table));
 	else
-		bptr_vaddr = phys_to_virt(*cpu_rel_addr);
+		spin_table = phys_to_virt(*cpu_rel_addr);
 
 	local_irq_save(flags);
-
-	out_be32(bptr_vaddr + BOOT_ENTRY_PIR, hw_cpu);
 #ifdef CONFIG_PPC32
-	out_be32(bptr_vaddr + BOOT_ENTRY_ADDR_LOWER, __pa(__early_start));
+#ifdef CONFIG_HOTPLUG_CPU
+	/* Corresponding to generic_set_cpu_dead() */
+	generic_set_cpu_up(nr);
+
+	if (system_state == SYSTEM_RUNNING) {
+		out_be32(&spin_table->addr_l, 0);
+
+		/*
+		 * We don't set the BPTR register here since it already points
+		 * to the boot page properly.
+		 */
+		mpic_reset_core(hw_cpu);
+
+		/* wait until core is ready... */
+		if (!spin_event_timeout(in_be32(&spin_table->addr_l) == 1,
+						10000, 100)) {
+			pr_err("%s: timeout waiting for core %d to reset\n",
+							__func__, hw_cpu);
+			ret = -ENOENT;
+			goto out;
+		}
+
+		/*  clear the acknowledge status */
+		__secondary_hold_acknowledge = -1;
+	}
+#endif
+	out_be32(&spin_table->pir, hw_cpu);
+	out_be32(&spin_table->addr_l, __pa(__early_start));
 
 	if (!ioremappable)
-		flush_dcache_range((ulong)bptr_vaddr,
-				(ulong)(bptr_vaddr + SIZE_BOOT_ENTRY));
+		flush_dcache_range((ulong)spin_table,
+			(ulong)spin_table + sizeof(struct epapr_spin_table));
 
 	/* Wait a bit for the CPU to ack. */
-	while ((__secondary_hold_acknowledge != hw_cpu) && (++n < 1000))
-		mdelay(1);
+	if (!spin_event_timeout(__secondary_hold_acknowledge == hw_cpu,
+					10000, 100)) {
+		pr_err("%s: timeout waiting for core %d to ack\n",
+						__func__, hw_cpu);
+		ret = -ENOENT;
+		goto out;
+	}
+out:
 #else
 	smp_generic_kick_cpu(nr);
 
-	out_be64((u64 *)(bptr_vaddr + BOOT_ENTRY_ADDR_UPPER),
-		__pa((u64)*((unsigned long long *) generic_secondary_smp_init)));
+	out_be32(&spin_table->pir, hw_cpu);
+	out_be64((u64 *)(&spin_table->addr_h),
+	  __pa((u64)*((unsigned long long *)generic_secondary_smp_init)));
 
 	if (!ioremappable)
-		flush_dcache_range((ulong)bptr_vaddr,
-				(ulong)(bptr_vaddr + SIZE_BOOT_ENTRY));
+		flush_dcache_range((ulong)spin_table,
+			(ulong)spin_table + sizeof(struct epapr_spin_table));
 #endif
 
 	local_irq_restore(flags);
 
 	if (ioremappable)
-		iounmap(bptr_vaddr);
-
-	pr_debug("waited %d msecs for CPU #%d.\n", n, nr);
+		iounmap(spin_table);
 
-	return 0;
+	return ret;
 }
 
 struct smp_ops_t smp_85xx_ops = {
 	.kick_cpu = smp_85xx_kick_cpu,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_disable	= generic_cpu_disable,
+	.cpu_die	= generic_cpu_die,
+#endif
 #ifdef CONFIG_KEXEC
 	.give_timebase	= smp_generic_give_timebase,
 	.take_timebase	= smp_generic_take_timebase,
@@ -218,8 +339,7 @@ static void mpc85xx_smp_machine_kexec(struct kimage *image)
 }
 #endif /* CONFIG_KEXEC */
 
-static void __init
-smp_85xx_setup_cpu(int cpu_nr)
+static void __cpuinit smp_85xx_setup_cpu(int cpu_nr)
 {
 	if (smp_85xx_ops.probe == smp_mpic_probe)
 		mpic_setup_this_cpu();
@@ -228,6 +348,16 @@ smp_85xx_setup_cpu(int cpu_nr)
 		doorbell_setup_this_cpu();
 }
 
+static const struct of_device_id mpc85xx_smp_guts_ids[] = {
+	{ .compatible = "fsl,mpc8572-guts", },
+	{ .compatible = "fsl,p1020-guts", },
+	{ .compatible = "fsl,p1021-guts", },
+	{ .compatible = "fsl,p1022-guts", },
+	{ .compatible = "fsl,p1023-guts", },
+	{ .compatible = "fsl,p2020-guts", },
+	{},
+};
+
 void __init mpc85xx_smp_init(void)
 {
 	struct device_node *np;
@@ -249,6 +379,22 @@ void __init mpc85xx_smp_init(void)
 		smp_85xx_ops.cause_ipi = doorbell_cause_ipi;
 	}
 
+	np = of_find_matching_node(NULL, mpc85xx_smp_guts_ids);
+	if (np) {
+		guts = of_iomap(np, 0);
+		of_node_put(np);
+		if (!guts) {
+			pr_err("%s: Could not map guts node address\n",
+								__func__);
+			return;
+		}
+		smp_85xx_ops.give_timebase = mpc85xx_give_timebase;
+		smp_85xx_ops.take_timebase = mpc85xx_take_timebase;
+#ifdef CONFIG_HOTPLUG_CPU
+		ppc_md.cpu_die = smp_85xx_mach_cpu_die;
+#endif
+	}
+
 	smp_ops = &smp_85xx_ops;
 
 #ifdef CONFIG_KEXEC

arch/powerpc/platforms/85xx/socrates.c

@@ -66,20 +66,13 @@ static void __init socrates_pic_init(void)
  */
 static void __init socrates_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-#endif
-
 	if (ppc_md.progress)
 		ppc_md.progress("socrates_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,mpc8540-pci")
-		fsl_add_bridge(np, 1);
-#endif
+	fsl_pci_assign_primary();
 }
 
-machine_device_initcall(socrates, mpc85xx_common_publish_devices);
+machine_arch_initcall(socrates, mpc85xx_common_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened

arch/powerpc/platforms/85xx/stx_gp3.c

@@ -60,21 +60,14 @@ static void __init stx_gp3_pic_init(void)
  */
 static void __init stx_gp3_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-#endif
-
 	if (ppc_md.progress)
 		ppc_md.progress("stx_gp3_setup_arch()", 0);
 
+	fsl_pci_assign_primary();
+
 #ifdef CONFIG_CPM2
 	cpm2_reset();
 #endif
-
-#ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,mpc8540-pci")
-		fsl_add_bridge(np, 1);
-#endif
 }
 
 static void stx_gp3_show_cpuinfo(struct seq_file *m)
@@ -93,7 +86,7 @@ static void stx_gp3_show_cpuinfo(struct seq_file *m)
 	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
 }
 
-machine_device_initcall(stx_gp3, mpc85xx_common_publish_devices);
+machine_arch_initcall(stx_gp3, mpc85xx_common_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened

arch/powerpc/platforms/85xx/tqm85xx.c

@@ -59,10 +59,6 @@ static void __init tqm85xx_pic_init(void)
  */
 static void __init tqm85xx_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-#endif
-
 	if (ppc_md.progress)
 		ppc_md.progress("tqm85xx_setup_arch()", 0);
 
@@ -70,20 +66,7 @@ static void __init tqm85xx_setup_arch(void)
 	cpm2_reset();
 #endif
 
-#ifdef CONFIG_PCI
-	for_each_node_by_type(np, "pci") {
-		if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
-		    of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
-			struct resource rsrc;
-			if (!of_address_to_resource(np, 0, &rsrc)) {
-				if ((rsrc.start & 0xfffff) == 0x8000)
-					fsl_add_bridge(np, 1);
-				else
-					fsl_add_bridge(np, 0);
-			}
-		}
-	}
-#endif
+	fsl_pci_assign_primary();
 }
 
 static void tqm85xx_show_cpuinfo(struct seq_file *m)
@@ -123,7 +106,7 @@ static void __devinit tqm85xx_ti1520_fixup(struct pci_dev *pdev)
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1520,
 		tqm85xx_ti1520_fixup);
 
-machine_device_initcall(tqm85xx, mpc85xx_common_publish_devices);
+machine_arch_initcall(tqm85xx, mpc85xx_common_publish_devices);
 
 static const char *board[] __initdata = {
 	"tqc,tqm8540",

arch/powerpc/platforms/85xx/xes_mpc85xx.c

@@ -111,18 +111,11 @@ static void xes_mpc85xx_fixups(void)
 	}
 }
 
-#ifdef CONFIG_PCI
-static int primary_phb_addr;
-#endif
-
 /*
  * Setup the architecture
  */
 static void __init xes_mpc85xx_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-#endif
 	struct device_node *root;
 	const char *model = "Unknown";
 
@@ -137,26 +130,14 @@ static void __init xes_mpc85xx_setup_arch(void)
 
 	xes_mpc85xx_fixups();
 
-#ifdef CONFIG_PCI
-	for_each_node_by_type(np, "pci") {
-		if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
-		    of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
-			struct resource rsrc;
-			of_address_to_resource(np, 0, &rsrc);
-			if ((rsrc.start & 0xfffff) == primary_phb_addr)
-				fsl_add_bridge(np, 1);
-			else
-				fsl_add_bridge(np, 0);
-		}
-	}
-#endif
-
 	mpc85xx_smp_init();
+
+	fsl_pci_assign_primary();
 }
 
-machine_device_initcall(xes_mpc8572, mpc85xx_common_publish_devices);
-machine_device_initcall(xes_mpc8548, mpc85xx_common_publish_devices);
-machine_device_initcall(xes_mpc8540, mpc85xx_common_publish_devices);
+machine_arch_initcall(xes_mpc8572, mpc85xx_common_publish_devices);
+machine_arch_initcall(xes_mpc8548, mpc85xx_common_publish_devices);
+machine_arch_initcall(xes_mpc8540, mpc85xx_common_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened
@@ -165,42 +146,21 @@ static int __init xes_mpc8572_probe(void)
 {
 	unsigned long root = of_get_flat_dt_root();
 
-	if (of_flat_dt_is_compatible(root, "xes,MPC8572")) {
-#ifdef CONFIG_PCI
-		primary_phb_addr = 0x8000;
-#endif
-		return 1;
-	} else {
-		return 0;
-	}
+	return of_flat_dt_is_compatible(root, "xes,MPC8572");
 }
 
 static int __init xes_mpc8548_probe(void)
 {
 	unsigned long root = of_get_flat_dt_root();
 
-	if (of_flat_dt_is_compatible(root, "xes,MPC8548")) {
-#ifdef CONFIG_PCI
-		primary_phb_addr = 0xb000;
-#endif
-		return 1;
-	} else {
-		return 0;
-	}
+	return of_flat_dt_is_compatible(root, "xes,MPC8548");
 }
 
 static int __init xes_mpc8540_probe(void)
 {
 	unsigned long root = of_get_flat_dt_root();
 
-	if (of_flat_dt_is_compatible(root, "xes,MPC8540")) {
-#ifdef CONFIG_PCI
-		primary_phb_addr = 0xb000;
-#endif
-		return 1;
-	} else {
-		return 0;
-	}
+	return of_flat_dt_is_compatible(root, "xes,MPC8540");
 }
 
 define_machine(xes_mpc8572) {

arch/powerpc/platforms/86xx/gef_ppc9a.c

@@ -73,13 +73,6 @@ static void __init gef_ppc9a_init_irq(void)
 static void __init gef_ppc9a_setup_arch(void)
 {
 	struct device_node *regs;
-#ifdef CONFIG_PCI
-	struct device_node *np;
-
-	for_each_compatible_node(np, "pci", "fsl,mpc8641-pcie") {
-		fsl_add_bridge(np, 1);
-	}
-#endif
 
 	printk(KERN_INFO "GE Intelligent Platforms PPC9A 6U VME SBC\n");
 
@@ -87,6 +80,8 @@ static void __init gef_ppc9a_setup_arch(void)
 	mpc86xx_smp_init();
 #endif
 
+	fsl_pci_assign_primary();
+
 	/* Remap basic board registers */
 	regs = of_find_compatible_node(NULL, NULL, "gef,ppc9a-fpga-regs");
 	if (regs) {
@@ -221,6 +216,7 @@ static long __init mpc86xx_time_init(void)
 static __initdata struct of_device_id of_bus_ids[] = {
 	{ .compatible = "simple-bus", },
 	{ .compatible = "gianfar", },
+	{ .compatible = "fsl,mpc8641-pcie", },
 	{},
 };
 
@@ -231,7 +227,7 @@ static int __init declare_of_platform_devices(void)
 
 	return 0;
 }
-machine_device_initcall(gef_ppc9a, declare_of_platform_devices);
+machine_arch_initcall(gef_ppc9a, declare_of_platform_devices);
 
 define_machine(gef_ppc9a) {
 	.name			= "GE PPC9A",

arch/powerpc/platforms/86xx/gef_sbc310.c

@@ -73,20 +73,14 @@ static void __init gef_sbc310_init_irq(void)
 static void __init gef_sbc310_setup_arch(void)
 {
 	struct device_node *regs;
-#ifdef CONFIG_PCI
-	struct device_node *np;
-
-	for_each_compatible_node(np, "pci", "fsl,mpc8641-pcie") {
-		fsl_add_bridge(np, 1);
-	}
-#endif
-
 	printk(KERN_INFO "GE Intelligent Platforms SBC310 6U VPX SBC\n");
 
 #ifdef CONFIG_SMP
 	mpc86xx_smp_init();
 #endif
 
+	fsl_pci_assign_primary();
+
 	/* Remap basic board registers */
 	regs = of_find_compatible_node(NULL, NULL, "gef,fpga-regs");
 	if (regs) {
@@ -209,6 +203,7 @@ static long __init mpc86xx_time_init(void)
 static __initdata struct of_device_id of_bus_ids[] = {
 	{ .compatible = "simple-bus", },
 	{ .compatible = "gianfar", },
+	{ .compatible = "fsl,mpc8641-pcie", },
 	{},
 };
 
@@ -219,7 +214,7 @@ static int __init declare_of_platform_devices(void)
 
 	return 0;
 }
-machine_device_initcall(gef_sbc310, declare_of_platform_devices);
+machine_arch_initcall(gef_sbc310, declare_of_platform_devices);
 
 define_machine(gef_sbc310) {
 	.name			= "GE SBC310",

arch/powerpc/platforms/86xx/gef_sbc610.c

@@ -73,13 +73,6 @@ static void __init gef_sbc610_init_irq(void)
 static void __init gef_sbc610_setup_arch(void)
 {
 	struct device_node *regs;
-#ifdef CONFIG_PCI
-	struct device_node *np;
-
-	for_each_compatible_node(np, "pci", "fsl,mpc8641-pcie") {
-		fsl_add_bridge(np, 1);
-	}
-#endif
 
 	printk(KERN_INFO "GE Intelligent Platforms SBC610 6U VPX SBC\n");
 
@@ -87,6 +80,8 @@ static void __init gef_sbc610_setup_arch(void)
 	mpc86xx_smp_init();
 #endif
 
+	fsl_pci_assign_primary();
+
 	/* Remap basic board registers */
 	regs = of_find_compatible_node(NULL, NULL, "gef,fpga-regs");
 	if (regs) {
@@ -198,6 +193,7 @@ static long __init mpc86xx_time_init(void)
 static __initdata struct of_device_id of_bus_ids[] = {
 	{ .compatible = "simple-bus", },
 	{ .compatible = "gianfar", },
+	{ .compatible = "fsl,mpc8641-pcie", },
 	{},
 };
 
@@ -208,7 +204,7 @@ static int __init declare_of_platform_devices(void)
 
 	return 0;
 }
-machine_device_initcall(gef_sbc610, declare_of_platform_devices);
+machine_arch_initcall(gef_sbc610, declare_of_platform_devices);
 
 define_machine(gef_sbc610) {
 	.name			= "GE SBC610",

arch/powerpc/platforms/86xx/mpc8610_hpcd.c

@@ -91,6 +91,9 @@ static struct of_device_id __initdata mpc8610_ids[] = {
 	{ .compatible = "simple-bus", },
 	/* So that the DMA channel nodes can be probed individually: */
 	{ .compatible = "fsl,eloplus-dma", },
+	/* PCI controllers */
+	{ .compatible = "fsl,mpc8610-pci", },
+	{ .compatible = "fsl,mpc8641-pcie", },
 	{}
 };
 
@@ -107,7 +110,7 @@ static int __init mpc8610_declare_of_platform_devices(void)
 
 	return 0;
 }
-machine_device_initcall(mpc86xx_hpcd, mpc8610_declare_of_platform_devices);
+machine_arch_initcall(mpc86xx_hpcd, mpc8610_declare_of_platform_devices);
 
 #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
 
@@ -278,25 +281,13 @@ mpc8610hpcd_valid_monitor_port(enum fsl_diu_monitor_port port)
 static void __init mpc86xx_hpcd_setup_arch(void)
 {
 	struct resource r;
-	struct device_node *np;
 	unsigned char *pixis;
 
 	if (ppc_md.progress)
 		ppc_md.progress("mpc86xx_hpcd_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	for_each_node_by_type(np, "pci") {
-		if (of_device_is_compatible(np, "fsl,mpc8610-pci")
-		    || of_device_is_compatible(np, "fsl,mpc8641-pcie")) {
-			struct resource rsrc;
-			of_address_to_resource(np, 0, &rsrc);
-			if ((rsrc.start & 0xfffff) == 0xa000)
-				fsl_add_bridge(np, 1);
-			else
-				fsl_add_bridge(np, 0);
-		}
-        }
-#endif
+	fsl_pci_assign_primary();
+
 #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
 	diu_ops.get_pixel_format	= mpc8610hpcd_get_pixel_format;
 	diu_ops.set_gamma_table		= mpc8610hpcd_set_gamma_table;

arch/powerpc/platforms/86xx/mpc86xx_hpcn.c

@@ -19,7 +19,6 @@
 #include <linux/delay.h>
 #include <linux/seq_file.h>
 #include <linux/of_platform.h>
-#include <linux/memblock.h>
 
 #include <asm/time.h>
 #include <asm/machdep.h>
@@ -51,15 +50,8 @@ extern int uli_exclude_device(struct pci_controller *hose,
 static int mpc86xx_exclude_device(struct pci_controller *hose,
 				   u_char bus, u_char devfn)
 {
-	struct device_node* node;	
-	struct resource rsrc;
-
-	node = hose->dn;
-	of_address_to_resource(node, 0, &rsrc);
-
-	if ((rsrc.start & 0xfffff) == 0x8000) {
+	if (hose->dn == fsl_pci_primary)
 		return uli_exclude_device(hose, bus, devfn);
-	}
 
 	return PCIBIOS_SUCCESSFUL;
 }
@@ -69,30 +61,11 @@ static int mpc86xx_exclude_device(struct pci_controller *hose,
 static void __init
 mpc86xx_hpcn_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-	struct pci_controller *hose;
-#endif
-	dma_addr_t max = 0xffffffff;
-
 	if (ppc_md.progress)
 		ppc_md.progress("mpc86xx_hpcn_setup_arch()", 0);
 
 #ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,mpc8641-pcie") {
-		struct resource rsrc;
-		of_address_to_resource(np, 0, &rsrc);
-		if ((rsrc.start & 0xfffff) == 0x8000)
-			fsl_add_bridge(np, 1);
-		else
-			fsl_add_bridge(np, 0);
-		hose = pci_find_hose_for_OF_device(np);
-		max = min(max, hose->dma_window_base_cur +
-			  hose->dma_window_size);
-	}
-
 	ppc_md.pci_exclude_device = mpc86xx_exclude_device;
-
 #endif
 
 	printk("MPC86xx HPCN board from Freescale Semiconductor\n");
@@ -101,13 +74,9 @@ mpc86xx_hpcn_setup_arch(void)
 	mpc86xx_smp_init();
 #endif
 
-#ifdef CONFIG_SWIOTLB
-	if ((memblock_end_of_DRAM() - 1) > max) {
-		ppc_swiotlb_enable = 1;
-		set_pci_dma_ops(&swiotlb_dma_ops);
-		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
-	}
-#endif
+	fsl_pci_assign_primary();
+
+	swiotlb_detect_4g();
 }
 
 
@@ -162,6 +131,7 @@ static __initdata struct of_device_id of_bus_ids[] = {
 	{ .compatible = "simple-bus", },
 	{ .compatible = "fsl,srio", },
 	{ .compatible = "gianfar", },
+	{ .compatible = "fsl,mpc8641-pcie", },
 	{},
 };
 
@@ -171,7 +141,7 @@ static int __init declare_of_platform_devices(void)
 
 	return 0;
 }
-machine_device_initcall(mpc86xx_hpcn, declare_of_platform_devices);
+machine_arch_initcall(mpc86xx_hpcn, declare_of_platform_devices);
 machine_arch_initcall(mpc86xx_hpcn, swiotlb_setup_bus_notifier);
 
 define_machine(mpc86xx_hpcn) {

arch/powerpc/platforms/86xx/sbc8641d.c

@@ -38,23 +38,16 @@
 static void __init
 sbc8641_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-#endif
-
 	if (ppc_md.progress)
 		ppc_md.progress("sbc8641_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,mpc8641-pcie")
-		fsl_add_bridge(np, 0);
-#endif
-
 	printk("SBC8641 board from Wind River\n");
 
 #ifdef CONFIG_SMP
 	mpc86xx_smp_init();
 #endif
+
+	fsl_pci_assign_primary();
 }
 
 
@@ -102,6 +95,7 @@ mpc86xx_time_init(void)
 static __initdata struct of_device_id of_bus_ids[] = {
 	{ .compatible = "simple-bus", },
 	{ .compatible = "gianfar", },
+	{ .compatible = "fsl,mpc8641-pcie", },
 	{},
 };
 
@@ -111,7 +105,7 @@ static int __init declare_of_platform_devices(void)
 
 	return 0;
 }
-machine_device_initcall(sbc8641, declare_of_platform_devices);
+machine_arch_initcall(sbc8641, declare_of_platform_devices);
 
 define_machine(sbc8641) {
 	.name			= "SBC8641D",

arch/powerpc/sysdev/Makefile

@@ -15,7 +15,7 @@ obj-$(CONFIG_PPC_DCR_NATIVE)	+= dcr-low.o
 obj-$(CONFIG_PPC_PMI)		+= pmi.o
 obj-$(CONFIG_U3_DART)		+= dart_iommu.o
 obj-$(CONFIG_MMIO_NVRAM)	+= mmio_nvram.o
-obj-$(CONFIG_FSL_SOC)		+= fsl_soc.o
+obj-$(CONFIG_FSL_SOC)		+= fsl_soc.o fsl_mpic_err.o
 obj-$(CONFIG_FSL_PCI)		+= fsl_pci.o $(fsl-msi-obj-y)
 obj-$(CONFIG_FSL_PMC)		+= fsl_pmc.o
 obj-$(CONFIG_FSL_LBC)		+= fsl_lbc.o

arch/powerpc/sysdev/fsl_85xx_l2ctlr.c

@@ -193,6 +193,16 @@ static struct of_device_id mpc85xx_l2ctlr_of_match[] = {
 	{
 		.compatible = "fsl,mpc8548-l2-cache-controller",
 	},
+	{	.compatible = "fsl,mpc8544-l2-cache-controller",},
+	{	.compatible = "fsl,mpc8572-l2-cache-controller",},
+	{	.compatible = "fsl,mpc8536-l2-cache-controller",},
+	{	.compatible = "fsl,p1021-l2-cache-controller",},
+	{	.compatible = "fsl,p1012-l2-cache-controller",},
+	{	.compatible = "fsl,p1025-l2-cache-controller",},
+	{	.compatible = "fsl,p1016-l2-cache-controller",},
+	{	.compatible = "fsl,p1024-l2-cache-controller",},
+	{	.compatible = "fsl,p1015-l2-cache-controller",},
+	{	.compatible = "fsl,p1010-l2-cache-controller",},
 	{},
 };
 

arch/powerpc/sysdev/fsl_mpic_err.c

@@ -0,0 +1,149 @@
+/*
+ * Copyright (C) 2012 Freescale Semiconductor, Inc.
+ *
+ * Author: Varun Sethi <varun.sethi@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ */
+
+#include <linux/irq.h>
+#include <linux/smp.h>
+#include <linux/interrupt.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mpic.h>
+
+#include "mpic.h"
+
+#define MPIC_ERR_INT_BASE	0x3900
+#define MPIC_ERR_INT_EISR	0x0000
+#define MPIC_ERR_INT_EIMR	0x0010
+
+static inline u32 mpic_fsl_err_read(u32 __iomem *base, unsigned int err_reg)
+{
+	return in_be32(base + (err_reg >> 2));
+}
+
+static inline void mpic_fsl_err_write(u32 __iomem *base, u32 value)
+{
+	out_be32(base + (MPIC_ERR_INT_EIMR >> 2), value);
+}
+
+static void fsl_mpic_mask_err(struct irq_data *d)
+{
+	u32 eimr;
+	struct mpic *mpic = irq_data_get_irq_chip_data(d);
+	unsigned int src = virq_to_hw(d->irq) - mpic->err_int_vecs[0];
+
+	eimr = mpic_fsl_err_read(mpic->err_regs, MPIC_ERR_INT_EIMR);
+	eimr |= (1 << (31 - src));
+	mpic_fsl_err_write(mpic->err_regs, eimr);
+}
+
+static void fsl_mpic_unmask_err(struct irq_data *d)
+{
+	u32 eimr;
+	struct mpic *mpic = irq_data_get_irq_chip_data(d);
+	unsigned int src = virq_to_hw(d->irq) - mpic->err_int_vecs[0];
+
+	eimr = mpic_fsl_err_read(mpic->err_regs, MPIC_ERR_INT_EIMR);
+	eimr &= ~(1 << (31 - src));
+	mpic_fsl_err_write(mpic->err_regs, eimr);
+}
+
+static struct irq_chip fsl_mpic_err_chip = {
+	.irq_disable	= fsl_mpic_mask_err,
+	.irq_mask	= fsl_mpic_mask_err,
+	.irq_unmask	= fsl_mpic_unmask_err,
+};
+
+int mpic_setup_error_int(struct mpic *mpic, int intvec)
+{
+	int i;
+
+	mpic->err_regs = ioremap(mpic->paddr + MPIC_ERR_INT_BASE, 0x1000);
+	if (!mpic->err_regs) {
+		pr_err("could not map mpic error registers\n");
+		return -ENOMEM;
+	}
+	mpic->hc_err = fsl_mpic_err_chip;
+	mpic->hc_err.name = mpic->name;
+	mpic->flags |= MPIC_FSL_HAS_EIMR;
+	/* allocate interrupt vectors for error interrupts */
+	for (i = MPIC_MAX_ERR - 1; i >= 0; i--)
+		mpic->err_int_vecs[i] = --intvec;
+
+	return 0;
+}
+
+int mpic_map_error_int(struct mpic *mpic, unsigned int virq, irq_hw_number_t  hw)
+{
+	if ((mpic->flags & MPIC_FSL_HAS_EIMR) &&
+	    (hw >= mpic->err_int_vecs[0] &&
+	     hw <= mpic->err_int_vecs[MPIC_MAX_ERR - 1])) {
+		WARN_ON(mpic->flags & MPIC_SECONDARY);
+
+		pr_debug("mpic: mapping as Error Interrupt\n");
+		irq_set_chip_data(virq, mpic);
+		irq_set_chip_and_handler(virq, &mpic->hc_err,
+					 handle_level_irq);
+		return 1;
+	}
+
+	return 0;
+}
+
+static irqreturn_t fsl_error_int_handler(int irq, void *data)
+{
+	struct mpic *mpic = (struct mpic *) data;
+	u32 eisr, eimr;
+	int errint;
+	unsigned int cascade_irq;
+
+	eisr = mpic_fsl_err_read(mpic->err_regs, MPIC_ERR_INT_EISR);
+	eimr = mpic_fsl_err_read(mpic->err_regs, MPIC_ERR_INT_EIMR);
+
+	if (!(eisr & ~eimr))
+		return IRQ_NONE;
+
+	while (eisr) {
+		errint = __builtin_clz(eisr);
+		cascade_irq = irq_linear_revmap(mpic->irqhost,
+				 mpic->err_int_vecs[errint]);
+		WARN_ON(cascade_irq == NO_IRQ);
+		if (cascade_irq != NO_IRQ) {
+			generic_handle_irq(cascade_irq);
+		} else {
+			eimr |=  1 << (31 - errint);
+			mpic_fsl_err_write(mpic->err_regs, eimr);
+		}
+		eisr &= ~(1 << (31 - errint));
+	}
+
+	return IRQ_HANDLED;
+}
+
+void mpic_err_int_init(struct mpic *mpic, irq_hw_number_t irqnum)
+{
+	unsigned int virq;
+	int ret;
+
+	virq = irq_create_mapping(mpic->irqhost, irqnum);
+	if (virq == NO_IRQ) {
+		pr_err("Error interrupt setup failed\n");
+		return;
+	}
+
+	/* Mask all error interrupts */
+	mpic_fsl_err_write(mpic->err_regs, ~0);
+
+	ret = request_irq(virq, fsl_error_int_handler, IRQF_NO_THREAD,
+		    "mpic-error-int", mpic);
+	if (ret)
+		pr_err("Failed to register error interrupt handler\n");
+}

arch/powerpc/sysdev/fsl_pci.c

@@ -143,18 +143,20 @@ static void __init setup_pci_atmu(struct pci_controller *hose,
 	pr_debug("PCI memory map start 0x%016llx, size 0x%016llx\n",
 		 (u64)rsrc->start, (u64)resource_size(rsrc));
 
-	if (of_device_is_compatible(hose->dn, "fsl,qoriq-pcie-v2.2")) {
-		win_idx = 2;
-		start_idx = 0;
-		end_idx = 3;
-	}
-
 	pci = ioremap(rsrc->start, resource_size(rsrc));
 	if (!pci) {
 	    dev_err(hose->parent, "Unable to map ATMU registers\n");
 	    return;
 	}
 
+	if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) {
+		if (in_be32(&pci->block_rev1) >= PCIE_IP_REV_2_2) {
+			win_idx = 2;
+			start_idx = 0;
+			end_idx = 3;
+		}
+	}
+
 	/* Disable all windows (except powar0 since it's ignored) */
 	for(i = 1; i < 5; i++)
 		out_be32(&pci->pow[i].powar, 0);
@@ -818,6 +820,7 @@ static const struct of_device_id pci_ids[] = {
 	{ .compatible = "fsl,p1010-pcie", },
 	{ .compatible = "fsl,p1023-pcie", },
 	{ .compatible = "fsl,p4080-pcie", },
+	{ .compatible = "fsl,qoriq-pcie-v2.4", },
 	{ .compatible = "fsl,qoriq-pcie-v2.3", },
 	{ .compatible = "fsl,qoriq-pcie-v2.2", },
 	{},
@@ -825,57 +828,78 @@ static const struct of_device_id pci_ids[] = {
 
 struct device_node *fsl_pci_primary;
 
-void __devinit fsl_pci_init(void)
+void fsl_pci_assign_primary(void)
 {
-	int ret;
-	struct device_node *node;
-	struct pci_controller *hose;
-	dma_addr_t max = 0xffffffff;
+	struct device_node *np;
 
 	/* Callers can specify the primary bus using other means. */
-	if (!fsl_pci_primary) {
-		/* If a PCI host bridge contains an ISA node, it's primary. */
-		node = of_find_node_by_type(NULL, "isa");
-		while ((fsl_pci_primary = of_get_parent(node))) {
-			of_node_put(node);
-			node = fsl_pci_primary;
-
-			if (of_match_node(pci_ids, node))
-				break;
-		}
+	if (fsl_pci_primary)
+		return;
+
+	/* If a PCI host bridge contains an ISA node, it's primary. */
+	np = of_find_node_by_type(NULL, "isa");
+	while ((fsl_pci_primary = of_get_parent(np))) {
+		of_node_put(np);
+		np = fsl_pci_primary;
+
+		if (of_match_node(pci_ids, np) && of_device_is_available(np))
+			return;
 	}
 
-	node = NULL;
-	for_each_node_by_type(node, "pci") {
-		if (of_match_node(pci_ids, node)) {
-			/*
-			 * If there's no PCI host bridge with ISA, arbitrarily
-			 * designate one as primary.  This can go away once
-			 * various bugs with primary-less systems are fixed.
-			 */
-			if (!fsl_pci_primary)
-				fsl_pci_primary = node;
-
-			ret = fsl_add_bridge(node, fsl_pci_primary == node);
-			if (ret == 0) {
-				hose = pci_find_hose_for_OF_device(node);
-				max = min(max, hose->dma_window_base_cur +
-						hose->dma_window_size);
-			}
+	/*
+	 * If there's no PCI host bridge with ISA, arbitrarily
+	 * designate one as primary.  This can go away once
+	 * various bugs with primary-less systems are fixed.
+	 */
+	for_each_matching_node(np, pci_ids) {
+		if (of_device_is_available(np)) {
+			fsl_pci_primary = np;
+			of_node_put(np);
+			return;
 		}
 	}
+}
+
+static int __devinit fsl_pci_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct device_node *node;
+	struct pci_controller *hose;
+
+	node = pdev->dev.of_node;
+	ret = fsl_add_bridge(node, fsl_pci_primary == node);
 
 #ifdef CONFIG_SWIOTLB
-	/*
-	 * if we couldn't map all of DRAM via the dma windows
-	 * we need SWIOTLB to handle buffers located outside of
-	 * dma capable memory region
-	 */
-	if (memblock_end_of_DRAM() - 1 > max) {
-		ppc_swiotlb_enable = 1;
-		set_pci_dma_ops(&swiotlb_dma_ops);
-		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
+	if (ret == 0) {
+		hose = pci_find_hose_for_OF_device(pdev->dev.of_node);
+
+		/*
+		 * if we couldn't map all of DRAM via the dma windows
+		 * we need SWIOTLB to handle buffers located outside of
+		 * dma capable memory region
+		 */
+		if (memblock_end_of_DRAM() - 1 > hose->dma_window_base_cur +
+				hose->dma_window_size)
+			ppc_swiotlb_enable = 1;
 	}
 #endif
+
+	mpc85xx_pci_err_probe(pdev);
+
+	return 0;
+}
+
+static struct platform_driver fsl_pci_driver = {
+	.driver = {
+		.name = "fsl-pci",
+		.of_match_table = pci_ids,
+	},
+	.probe = fsl_pci_probe,
+};
+
+static int __init fsl_pci_init(void)
+{
+	return platform_driver_register(&fsl_pci_driver);
 }
+arch_initcall(fsl_pci_init);
 #endif

arch/powerpc/sysdev/fsl_pci.h

@@ -16,6 +16,7 @@
 
 #define PCIE_LTSSM	0x0404		/* PCIE Link Training and Status */
 #define PCIE_LTSSM_L0	0x16		/* L0 state */
+#define PCIE_IP_REV_2_2		0x02080202 /* PCIE IP block version Rev2.2 */
 #define PIWAR_EN		0x80000000	/* Enable */
 #define PIWAR_PF		0x20000000	/* prefetch */
 #define PIWAR_TGI_LOCAL		0x00f00000	/* target - local memory */
@@ -57,7 +58,9 @@ struct ccsr_pci {
 	__be32	pex_pme_mes_disr;	/* 0x.024 - PCIE PME and message disable register */
 	__be32	pex_pme_mes_ier;	/* 0x.028 - PCIE PME and message interrupt enable register */
 	__be32	pex_pmcr;		/* 0x.02c - PCIE power management command register */
-	u8	res3[3024];
+	u8	res3[3016];
+	__be32	block_rev1;	/* 0x.bf8 - PCIE Block Revision register 1 */
+	__be32	block_rev2;	/* 0x.bfc - PCIE Block Revision register 2 */
 
 /* PCI/PCI Express outbound window 0-4
  * Window 0 is the default window and is the only window enabled upon reset.
@@ -95,10 +98,19 @@ u64 fsl_pci_immrbar_base(struct pci_controller *hose);
 
 extern struct device_node *fsl_pci_primary;
 
-#ifdef CONFIG_FSL_PCI
-void fsl_pci_init(void);
+#ifdef CONFIG_PCI
+void fsl_pci_assign_primary(void);
 #else
-static inline void fsl_pci_init(void) {}
+static inline void fsl_pci_assign_primary(void) {}
+#endif
+
+#ifdef CONFIG_EDAC_MPC85XX
+int mpc85xx_pci_err_probe(struct platform_device *op);
+#else
+static inline int mpc85xx_pci_err_probe(struct platform_device *op)
+{
+	return -ENOTSUPP;
+}
 #endif
 
 #endif /* __POWERPC_FSL_PCI_H */

arch/powerpc/sysdev/mpic.c

@@ -6,7 +6,7 @@
  *  with various broken implementations of this HW.
  *
  *  Copyright (C) 2004 Benjamin Herrenschmidt, IBM Corp.
- *  Copyright 2010-2011 Freescale Semiconductor, Inc.
+ *  Copyright 2010-2012 Freescale Semiconductor, Inc.
  *
  *  This file is subject to the terms and conditions of the GNU General Public
  *  License.  See the file COPYING in the main directory of this archive
@@ -221,24 +221,24 @@ static inline void _mpic_ipi_write(struct mpic *mpic, unsigned int ipi, u32 valu
 	_mpic_write(mpic->reg_type, &mpic->gregs, offset, value);
 }
 
-static inline u32 _mpic_tm_read(struct mpic *mpic, unsigned int tm)
+static inline unsigned int mpic_tm_offset(struct mpic *mpic, unsigned int tm)
 {
-	unsigned int offset = MPIC_INFO(TIMER_VECTOR_PRI) +
-			      ((tm & 3) * MPIC_INFO(TIMER_STRIDE));
+	return (tm >> 2) * MPIC_TIMER_GROUP_STRIDE +
+	       (tm & 3) * MPIC_INFO(TIMER_STRIDE);
+}
 
-	if (tm >= 4)
-		offset += 0x1000 / 4;
+static inline u32 _mpic_tm_read(struct mpic *mpic, unsigned int tm)
+{
+	unsigned int offset = mpic_tm_offset(mpic, tm) +
+			      MPIC_INFO(TIMER_VECTOR_PRI);
 
 	return _mpic_read(mpic->reg_type, &mpic->tmregs, offset);
 }
 
 static inline void _mpic_tm_write(struct mpic *mpic, unsigned int tm, u32 value)
 {
-	unsigned int offset = MPIC_INFO(TIMER_VECTOR_PRI) +
-			      ((tm & 3) * MPIC_INFO(TIMER_STRIDE));
-
-	if (tm >= 4)
-		offset += 0x1000 / 4;
+	unsigned int offset = mpic_tm_offset(mpic, tm) +
+			      MPIC_INFO(TIMER_VECTOR_PRI);
 
 	_mpic_write(mpic->reg_type, &mpic->tmregs, offset, value);
 }
@@ -1026,6 +1026,9 @@ static int mpic_host_map(struct irq_domain *h, unsigned int virq,
 		return 0;
 	}
 
+	if (mpic_map_error_int(mpic, virq, hw))
+		return 0;
+
 	if (hw >= mpic->num_sources)
 		return -EINVAL;
 
@@ -1085,7 +1088,16 @@ static int mpic_host_xlate(struct irq_domain *h, struct device_node *ct,
 		 */
 		switch (intspec[2]) {
 		case 0:
-		case 1: /* no EISR/EIMR support for now, treat as shared IRQ */
+			break;
+		case 1:
+			if (!(mpic->flags & MPIC_FSL_HAS_EIMR))
+				break;
+
+			if (intspec[3] >= ARRAY_SIZE(mpic->err_int_vecs))
+				return -EINVAL;
+
+			*out_hwirq = mpic->err_int_vecs[intspec[3]];
+
 			break;
 		case 2:
 			if (intspec[0] >= ARRAY_SIZE(mpic->ipi_vecs))
@@ -1301,6 +1313,42 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 	mpic_map(mpic, mpic->paddr, &mpic->gregs, MPIC_INFO(GREG_BASE), 0x1000);
 	mpic_map(mpic, mpic->paddr, &mpic->tmregs, MPIC_INFO(TIMER_BASE), 0x1000);
 
+	if (mpic->flags & MPIC_FSL) {
+		u32 brr1, version;
+		int ret;
+
+		/*
+		 * Yes, Freescale really did put global registers in the
+		 * magic per-cpu area -- and they don't even show up in the
+		 * non-magic per-cpu copies that this driver normally uses.
+		 */
+		mpic_map(mpic, mpic->paddr, &mpic->thiscpuregs,
+			 MPIC_CPU_THISBASE, 0x1000);
+
+		brr1 = _mpic_read(mpic->reg_type, &mpic->thiscpuregs,
+				MPIC_FSL_BRR1);
+		version = brr1 & MPIC_FSL_BRR1_VER;
+
+		/* Error interrupt mask register (EIMR) is required for
+		 * handling individual device error interrupts. EIMR
+		 * was added in MPIC version 4.1.
+		 *
+		 * Over here we reserve vector number space for error
+		 * interrupt vectors. This space is stolen from the
+		 * global vector number space, as in case of ipis
+		 * and timer interrupts.
+		 *
+		 * Available vector space = intvec_top - 12, where 12
+		 * is the number of vectors which have been consumed by
+		 * ipis and timer interrupts.
+		 */
+		if (version >= 0x401) {
+			ret = mpic_setup_error_int(mpic, intvec_top - 12);
+			if (ret)
+				return NULL;
+		}
+	}
+
 	/* Reset */
 
 	/* When using a device-node, reset requests are only honored if the MPIC
@@ -1440,6 +1488,7 @@ void __init mpic_assign_isu(struct mpic *mpic, unsigned int isu_num,
 void __init mpic_init(struct mpic *mpic)
 {
 	int i, cpu;
+	int num_timers = 4;
 
 	BUG_ON(mpic->num_sources == 0);
 
@@ -1448,15 +1497,34 @@ void __init mpic_init(struct mpic *mpic)
 	/* Set current processor priority to max */
 	mpic_cpu_write(MPIC_INFO(CPU_CURRENT_TASK_PRI), 0xf);
 
+	if (mpic->flags & MPIC_FSL) {
+		u32 brr1 = _mpic_read(mpic->reg_type, &mpic->thiscpuregs,
+				      MPIC_FSL_BRR1);
+		u32 version = brr1 & MPIC_FSL_BRR1_VER;
+
+		/*
+		 * Timer group B is present at the latest in MPIC 3.1 (e.g.
+		 * mpc8536).  It is not present in MPIC 2.0 (e.g. mpc8544).
+		 * I don't know about the status of intermediate versions (or
+		 * whether they even exist).
+		 */
+		if (version >= 0x0301)
+			num_timers = 8;
+	}
+
+	/* FSL mpic error interrupt intialization */
+	if (mpic->flags & MPIC_FSL_HAS_EIMR)
+		mpic_err_int_init(mpic, MPIC_FSL_ERR_INT);
+
 	/* Initialize timers to our reserved vectors and mask them for now */
-	for (i = 0; i < 4; i++) {
+	for (i = 0; i < num_timers; i++) {
+		unsigned int offset = mpic_tm_offset(mpic, i);
+
 		mpic_write(mpic->tmregs,
-			   i * MPIC_INFO(TIMER_STRIDE) +
-			   MPIC_INFO(TIMER_DESTINATION),
+			   offset + MPIC_INFO(TIMER_DESTINATION),
 			   1 << hard_smp_processor_id());
 		mpic_write(mpic->tmregs,
-			   i * MPIC_INFO(TIMER_STRIDE) +
-			   MPIC_INFO(TIMER_VECTOR_PRI),
+			   offset + MPIC_INFO(TIMER_VECTOR_PRI),
 			   MPIC_VECPRI_MASK |
 			   (9 << MPIC_VECPRI_PRIORITY_SHIFT) |
 			   (mpic->timer_vecs[0] + i));

arch/powerpc/sysdev/mpic.h

@@ -40,4 +40,26 @@ extern int mpic_set_affinity(struct irq_data *d,
 			     const struct cpumask *cpumask, bool force);
 extern void mpic_reset_core(int cpu);
 
+#ifdef CONFIG_FSL_SOC
+extern int mpic_map_error_int(struct mpic *mpic, unsigned int virq, irq_hw_number_t  hw);
+extern void mpic_err_int_init(struct mpic *mpic, irq_hw_number_t irqnum);
+extern int mpic_setup_error_int(struct mpic *mpic, int intvec);
+#else
+static inline int mpic_map_error_int(struct mpic *mpic, unsigned int virq, irq_hw_number_t  hw)
+{
+	return 0;
+}
+
+
+static inline void mpic_err_int_init(struct mpic *mpic, irq_hw_number_t irqnum)
+{
+	return;
+}
+
+static inline int mpic_setup_error_int(struct mpic *mpic, int intvec)
+{
+	return -1;
+}
+#endif
+
 #endif /* _POWERPC_SYSDEV_MPIC_H */