staging: comedi: rti800: remove am9513.h header

This driver is the only file that includes the am9513.h header and
nothing from that header is actually used. Using the macros provided
by am9513.h is a bit ugly due to having to predefine a number of
additional macros to handle the low-level I/O to the Am9513 device.

Just remove the header and the unused I/O helpers in the rti800
driver. If support for the am9513 is added later it wil be implemented
properly at that time.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/comedi/drivers/am9513.h

@@ -1,79 +0,0 @@
-/*
-    module/am9513.h
-    value added preprocessor definitions for Am9513 timer chip
-
-    COMEDI - Linux Control and Measurement Device Interface
-    Copyright (C) 1998 David A. Schleef <ds@schleef.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-#ifndef _AM9513_H_
-#define _AM9513_H_
-
-#if 0
-
-/*
- *	Before including this file, the following need to be defined:
- */
-#define Am9513_8BITBUS xxx
-/* or */
-#define Am9513_16BITBUS xxx
-
-#define Am9513_output_control(a)	xxx
-#define Am9513_input_status()		xxx
-#define Am9513_output_data(a)		xxx
-#define Am9513_input_data()		xxx
-
-#endif
-
-/*
- *
- */
-
-#ifdef Am9513_8BITBUS
-
-#define Am9513_write_register(reg, val)				\
-	do {							\
-		Am9513_output_control(reg);			\
-		Am9513_output_data(val>>8);			\
-		Am9513_output_data(val&0xff);			\
-	} while (0)
-
-#define Am9513_read_register(reg, val)				\
-	do {							\
-		Am9513_output_control(reg);			\
-		val = Am9513_input_data()<<8;			\
-		val |= Am9513_input_data();			\
-	} while (0)
-
-#else /* Am9513_16BITBUS */
-
-#define Am9513_write_register(reg, val)				\
-	do {							\
-		Am9513_output_control(reg);			\
-		Am9513_output_data(val);			\
-	} while (0)
-
-#define Am9513_read_register(reg, val)				\
-	do {							\
-		Am9513_output_control(reg);			\
-		val = Am9513_input_data();			\
-	} while (0)
-
-#endif
-
-#endif

drivers/staging/comedi/drivers/rti800.c

@@ -90,15 +90,6 @@ Configuration options:
 
 #define RTI800_AI_TIMEOUT	100
 
-#define Am9513_8BITBUS
-
-#define Am9513_output_control(a)	outb(a, dev->iobase+RTI800_9513A_CNTRL)
-#define Am9513_output_data(a)		outb(a, dev->iobase+RTI800_9513A_DATA)
-#define Am9513_input_data()		inb(dev->iobase+RTI800_9513A_DATA)
-#define Am9513_input_status()		inb(dev->iobase+RTI800_9513A_STATUS)
-
-#include "am9513.h"
-
 static const struct comedi_lrange range_rti800_ai_10_bipolar = {
 	4, {
 		BIP_RANGE(10),