[MTD] Remove trailing whitespace

The newly-added cafe_ecc.c had a lot of it because of the way the lookup
table was auto-generated; clean up the other files too while we're at it.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>

drivers/mtd/chips/gen_probe.c

@@ -40,7 +40,7 @@ struct mtd_info *mtd_do_chip_probe(struct map_info *map, struct chip_probe *cp)
 	if (mtd) {
 		if (mtd->size > map->size) {
 			printk(KERN_WARNING "Reducing visibility of %ldKiB chip to %ldKiB\n",
-			       (unsigned long)mtd->size >> 10, 
+			       (unsigned long)mtd->size >> 10,
 			       (unsigned long)map->size >> 10);
 			mtd->size = map->size;
 		}

drivers/mtd/maps/bast-flash.c

@@ -131,7 +131,7 @@ static int bast_flash_probe(struct platform_device *pdev)
 
 	info->map.phys = res->start;
 	info->map.size = res->end - res->start + 1;
-	info->map.name = pdev->dev.bus_id;	
+	info->map.name = pdev->dev.bus_id;
 	info->map.bankwidth = 2;
 
 	if (info->map.size > AREA_MAXSIZE)

drivers/mtd/maps/ck804xrom.c

@@ -26,7 +26,7 @@
 
 #define ADDRESS_NAME_LEN 18
 
-#define ROM_PROBE_STEP_SIZE (64*1024) 
+#define ROM_PROBE_STEP_SIZE (64*1024)
 
 struct ck804xrom_window {
 	void __iomem *virt;

drivers/mtd/maps/nettel.c

@@ -472,7 +472,7 @@ out_unmap2:
 	iounmap(nettel_amd_map.virt);
 
 	return(rc);
-		
+
 }
 
 /****************************************************************************/

drivers/mtd/nand/cafe.c

@@ -1,4 +1,4 @@
-/* 
+/*
  * Driver for One Laptop Per Child ‘CAFÉ’ controller, aka Marvell 88ALP01
  *
  * Copyright © 2006 Red Hat, Inc.
@@ -60,7 +60,6 @@ struct cafe_priv {
 	int page_addr;
 	dma_addr_t dmaaddr;
 	unsigned char *dmabuf;
-	
 };
 
 static int usedma = 1;
@@ -217,7 +216,7 @@ static void cafe_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
 		ctl1 |= ((adrbytes-1)|8) << 27;
 
 	if (command == NAND_CMD_SEQIN || command == NAND_CMD_ERASE1) {
-		/* Ignore the first command of a pair; the hardware 
+		/* Ignore the first command of a pair; the hardware
 		   deals with them both at once, later */
 		cafe->ctl1 = ctl1;
 		cafe_dev_dbg(&cafe->pdev->dev, "Setup for delayed command, ctl1 %08x, dlen %x\n",
@@ -231,7 +230,7 @@ static void cafe_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
 		cafe_writel(cafe, cafe->ctl2 | 0x100 | NAND_CMD_READSTART, NAND_CTRL2);
 
  do_command:
-	cafe_dev_dbg(&cafe->pdev->dev, "dlen %x, ctl1 %x, ctl2 %x\n", 
+	cafe_dev_dbg(&cafe->pdev->dev, "dlen %x, ctl1 %x, ctl2 %x\n",
 		cafe->datalen, ctl1, cafe_readl(cafe, NAND_CTRL2));
 
 	/* NB: The datasheet lies -- we really should be subtracting 1 here */
@@ -380,7 +379,7 @@ static int cafe_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip,
 			uint32_t tmp = cafe_readl(cafe, NAND_ECC_SYN01 + (i*2));
 			syn[i] = tmp & 0xfff;
 			syn[i+1] = (tmp >> 16) & 0xfff;
-		} 
+		}
 
 		if ((i = cafe_correct_ecc(buf, syn)) < 0) {
 			dev_dbg(&cafe->pdev->dev, "Failed to correct ECC at %08x\n",
@@ -404,7 +403,7 @@ static struct nand_ecclayout cafe_oobinfo_2048 = {
 	.oobfree = {{14, 50}}
 };
 
-/* Ick. The BBT code really ought to be able to work this bit out 
+/* Ick. The BBT code really ought to be able to work this bit out
    for itself from the above, at least for the 2KiB case */
 static uint8_t cafe_bbt_pattern_2048[] = { 'B', 'b', 't', '0' };
 static uint8_t cafe_mirror_pattern_2048[] = { '1', 't', 'b', 'B' };
@@ -579,7 +578,7 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev,
 		cafe->nand.options |= NAND_SKIP_BBTSCAN;
 		cafe->nand.block_bad = cafe_nand_block_bad;
 	}
-	
+
 	/* Start off by resetting the NAND controller completely */
 	cafe_writel(cafe, 1, NAND_RESET);
 	cafe_writel(cafe, 0, NAND_RESET);
@@ -600,7 +599,7 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev,
 	err = request_irq(pdev->irq, &cafe_nand_interrupt, SA_SHIRQ, "CAFE NAND", mtd);
 	if (err) {
 		dev_warn(&pdev->dev, "Could not register IRQ %d\n", pdev->irq);
-		
+
 		goto out_free_dma;
 	}
 #if 1
@@ -654,7 +653,7 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev,
 	writel(0x84600070, cafe->mmio);
 	udelay(10);
 	cafe_dev_dbg(&cafe->pdev->dev, "Status %x\n", cafe_readl(cafe, NAND_NONMEM));
-#endif		
+#endif
 	/* Scan to find existance of the device */
 	if (nand_scan_ident(mtd, 1)) {
 		err = -ENXIO;

drivers/mtd/nand/cs553x_nand.c

@@ -11,7 +11,7 @@
  * published by the Free Software Foundation.
  *
  *  Overview:
- *   This is a device driver for the NAND flash controller found on 
+ *   This is a device driver for the NAND flash controller found on
  *   the AMD CS5535/CS5536 companion chipsets for the Geode processor.
  *
  */
@@ -303,7 +303,7 @@ static int __init cs553x_init(void)
 			err = cs553x_init_one(i, !!(val & FLSH_MEM_IO), val & 0xFFFFFFFF);
 	}
 
-	/* Register all devices together here. This means we can easily hack it to 
+	/* Register all devices together here. This means we can easily hack it to
 	   do mtdconcat etc. if we want to. */
 	for (i = 0; i < NR_CS553X_CONTROLLERS; i++) {
 		if (cs553x_mtd[i]) {

drivers/mtd/nand/s3c2410.c

@@ -283,7 +283,7 @@ static void s3c2410_nand_hwcontrol(struct mtd_info *mtd, int cmd,
 				   unsigned int ctrl)
 {
 	struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
-	
+
 	if (cmd == NAND_CMD_NONE)
 		return;
 

drivers/mtd/onenand/onenand_base.c

@@ -406,7 +406,7 @@ static int onenand_try_interrupt_wait(struct mtd_info *mtd, int state)
 
 		/* Release the irq */
 		free_irq(this->irq, this);
-		
+
 		this->wait = onenand_wait;
 	}