Merge remote-tracking branch 'regulator/topic/ab8500' into v3.9-rc8

arch/arm/mach-ux500/board-mop500-regulators.c

@@ -5,6 +5,7 @@
  *
  * Authors: Sundar Iyer <sundar.iyer@stericsson.com>
  *          Bengt Jonsson <bengt.g.jonsson@stericsson.com>
+ *          Daniel Willerud <daniel.willerud@stericsson.com>
  *
  * MOP500 board specific initialization for regulators
  */
@@ -12,6 +13,7 @@
 #include <linux/regulator/machine.h>
 #include <linux/regulator/ab8500.h>
 #include "board-mop500-regulators.h"
+#include "id.h"
 
 static struct regulator_consumer_supply gpio_en_3v3_consumers[] = {
        REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
@@ -53,21 +55,37 @@ struct regulator_init_data tps61052_regulator = {
 };
 
 static struct regulator_consumer_supply ab8500_vaux1_consumers[] = {
-	/* External displays, connector on board 2v5 power supply */
-	REGULATOR_SUPPLY("vaux12v5", "mcde.0"),
+	/* Main display, u8500 R3 uib */
+	REGULATOR_SUPPLY("vddi", "mcde_disp_sony_acx424akp.0"),
+	/* Main display, u8500 uib and ST uib */
+	REGULATOR_SUPPLY("vdd1", "samsung_s6d16d0.0"),
+	/* Secondary display, ST uib */
+	REGULATOR_SUPPLY("vdd1", "samsung_s6d16d0.1"),
 	/* SFH7741 proximity sensor */
 	REGULATOR_SUPPLY("vcc", "gpio-keys.0"),
 	/* BH1780GLS ambient light sensor */
 	REGULATOR_SUPPLY("vcc", "2-0029"),
 	/* lsm303dlh accelerometer */
-	REGULATOR_SUPPLY("vdd", "3-0018"),
+	REGULATOR_SUPPLY("vdd", "2-0018"),
+	/* lsm303dlhc accelerometer */
+	REGULATOR_SUPPLY("vdd", "2-0019"),
 	/* lsm303dlh magnetometer */
-	REGULATOR_SUPPLY("vdd", "3-001e"),
+	REGULATOR_SUPPLY("vdd", "2-001e"),
 	/* Rohm BU21013 Touchscreen devices */
 	REGULATOR_SUPPLY("avdd", "3-005c"),
 	REGULATOR_SUPPLY("avdd", "3-005d"),
 	/* Synaptics RMI4 Touchscreen device */
 	REGULATOR_SUPPLY("vdd", "3-004b"),
+	/* L3G4200D Gyroscope device */
+	REGULATOR_SUPPLY("vdd", "2-0068"),
+	/* Ambient light sensor device */
+	REGULATOR_SUPPLY("vdd", "3-0029"),
+	/* Pressure sensor device */
+	REGULATOR_SUPPLY("vdd", "2-005c"),
+	/* Cypress TrueTouch Touchscreen device */
+	REGULATOR_SUPPLY("vcpin", "spi8.0"),
+	/* Camera device */
+	REGULATOR_SUPPLY("vaux12v5", "mmio_camera"),
 };
 
 static struct regulator_consumer_supply ab8500_vaux2_consumers[] = {
@@ -75,18 +93,50 @@ static struct regulator_consumer_supply ab8500_vaux2_consumers[] = {
 	REGULATOR_SUPPLY("vmmc", "sdi4"),
 	/* AB8500 audio codec */
 	REGULATOR_SUPPLY("vcc-N2158", "ab8500-codec.0"),
+	/* AB8500 accessory detect 1 */
+	REGULATOR_SUPPLY("vcc-N2158", "ab8500-acc-det.0"),
+	/* AB8500 Tv-out device */
+	REGULATOR_SUPPLY("vcc-N2158", "mcde_tv_ab8500.4"),
+	/* AV8100 HDMI device */
+	REGULATOR_SUPPLY("vcc-N2158", "av8100_hdmi.3"),
 };
 
 static struct regulator_consumer_supply ab8500_vaux3_consumers[] = {
+	REGULATOR_SUPPLY("v-SD-STM", "stm"),
 	/* External MMC slot power */
 	REGULATOR_SUPPLY("vmmc", "sdi0"),
 };
 
+static struct regulator_consumer_supply ab8505_vaux4_consumers[] = {
+};
+
+static struct regulator_consumer_supply ab8505_vaux5_consumers[] = {
+};
+
+static struct regulator_consumer_supply ab8505_vaux6_consumers[] = {
+};
+
+static struct regulator_consumer_supply ab8505_vaux8_consumers[] = {
+	/* AB8500 audio codec device */
+	REGULATOR_SUPPLY("v-aux8", NULL),
+};
+
+static struct regulator_consumer_supply ab8505_vadc_consumers[] = {
+	/* Internal general-purpose ADC */
+	REGULATOR_SUPPLY("vddadc", "ab8500-gpadc.0"),
+	/* ADC for charger */
+	REGULATOR_SUPPLY("vddadc", "ab8500-charger.0"),
+};
+
 static struct regulator_consumer_supply ab8500_vtvout_consumers[] = {
 	/* TV-out DENC supply */
 	REGULATOR_SUPPLY("vtvout", "ab8500-denc.0"),
 	/* Internal general-purpose ADC */
 	REGULATOR_SUPPLY("vddadc", "ab8500-gpadc.0"),
+	/* ADC for charger */
+	REGULATOR_SUPPLY("vddadc", "ab8500-charger.0"),
+	/* AB8500 Tv-out device */
+	REGULATOR_SUPPLY("vtvout", "mcde_tv_ab8500.4"),
 };
 
 static struct regulator_consumer_supply ab8500_vaud_consumers[] = {
@@ -114,77 +164,90 @@ static struct regulator_consumer_supply ab8500_vintcore_consumers[] = {
 	REGULATOR_SUPPLY("v-intcore", NULL),
 	/* USB Transceiver */
 	REGULATOR_SUPPLY("vddulpivio18", "ab8500-usb.0"),
+	/* Handled by abx500 clk driver */
+	REGULATOR_SUPPLY("v-intcore", "abx500-clk.0"),
+};
+
+static struct regulator_consumer_supply ab8505_usb_consumers[] = {
+	/* HS USB OTG physical interface */
+	REGULATOR_SUPPLY("v-ape", NULL),
 };
 
 static struct regulator_consumer_supply ab8500_vana_consumers[] = {
-	/* External displays, connector on board, 1v8 power supply */
-	REGULATOR_SUPPLY("vsmps2", "mcde.0"),
+	/* DB8500 DSI */
+	REGULATOR_SUPPLY("vdddsi1v2", "mcde"),
+	REGULATOR_SUPPLY("vdddsi1v2", "b2r2_core"),
+	REGULATOR_SUPPLY("vdddsi1v2", "b2r2_1_core"),
+	REGULATOR_SUPPLY("vdddsi1v2", "dsilink.0"),
+	REGULATOR_SUPPLY("vdddsi1v2", "dsilink.1"),
+	REGULATOR_SUPPLY("vdddsi1v2", "dsilink.2"),
+	/* DB8500 CSI */
+	REGULATOR_SUPPLY("vddcsi1v2", "mmio_camera"),
 };
 
 /* ab8500 regulator register initialization */
-struct ab8500_regulator_reg_init
-ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = {
+static struct ab8500_regulator_reg_init ab8500_reg_init[] = {
 	/*
 	 * VanaRequestCtrl          = HP/LP depending on VxRequest
 	 * VextSupply1RequestCtrl   = HP/LP depending on VxRequest
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL2, 0x00),
+	INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL2,       0xf0, 0x00),
 	/*
 	 * VextSupply2RequestCtrl   = HP/LP depending on VxRequest
 	 * VextSupply3RequestCtrl   = HP/LP depending on VxRequest
 	 * Vaux1RequestCtrl         = HP/LP depending on VxRequest
 	 * Vaux2RequestCtrl         = HP/LP depending on VxRequest
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL3, 0x00),
+	INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL3,       0xff, 0x00),
 	/*
 	 * Vaux3RequestCtrl         = HP/LP depending on VxRequest
 	 * SwHPReq                  = Control through SWValid disabled
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL4, 0x00),
+	INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL4,       0x07, 0x00),
 	/*
 	 * VanaSysClkReq1HPValid    = disabled
 	 * Vaux1SysClkReq1HPValid   = disabled
 	 * Vaux2SysClkReq1HPValid   = disabled
 	 * Vaux3SysClkReq1HPValid   = disabled
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID1, 0x00),
+	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID1, 0xe8, 0x00),
 	/*
 	 * VextSupply1SysClkReq1HPValid = disabled
 	 * VextSupply2SysClkReq1HPValid = disabled
 	 * VextSupply3SysClkReq1HPValid = SysClkReq1 controlled
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID2, 0x40),
+	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID2, 0x70, 0x40),
 	/*
 	 * VanaHwHPReq1Valid        = disabled
 	 * Vaux1HwHPreq1Valid       = disabled
 	 * Vaux2HwHPReq1Valid       = disabled
 	 * Vaux3HwHPReqValid        = disabled
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID1, 0x00),
+	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID1,     0xe8, 0x00),
 	/*
 	 * VextSupply1HwHPReq1Valid = disabled
 	 * VextSupply2HwHPReq1Valid = disabled
 	 * VextSupply3HwHPReq1Valid = disabled
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID2, 0x00),
+	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID2,     0x07, 0x00),
 	/*
 	 * VanaHwHPReq2Valid        = disabled
 	 * Vaux1HwHPReq2Valid       = disabled
 	 * Vaux2HwHPReq2Valid       = disabled
 	 * Vaux3HwHPReq2Valid       = disabled
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID1, 0x00),
+	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID1,     0xe8, 0x00),
 	/*
 	 * VextSupply1HwHPReq2Valid = disabled
 	 * VextSupply2HwHPReq2Valid = disabled
 	 * VextSupply3HwHPReq2Valid = HWReq2 controlled
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID2, 0x04),
+	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID2,     0x07, 0x04),
 	/*
 	 * VanaSwHPReqValid         = disabled
 	 * Vaux1SwHPReqValid        = disabled
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID1, 0x00),
+	INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID1,      0xa0, 0x00),
 	/*
 	 * Vaux2SwHPReqValid        = disabled
 	 * Vaux3SwHPReqValid        = disabled
@@ -192,7 +255,7 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = {
 	 * VextSupply2SwHPReqValid  = disabled
 	 * VextSupply3SwHPReqValid  = disabled
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID2, 0x00),
+	INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID2,      0x1f, 0x00),
 	/*
 	 * SysClkReq2Valid1         = SysClkReq2 controlled
 	 * SysClkReq3Valid1         = disabled
@@ -202,7 +265,7 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = {
 	 * SysClkReq7Valid1         = disabled
 	 * SysClkReq8Valid1         = disabled
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID1, 0x2a),
+	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID1,    0xfe, 0x2a),
 	/*
 	 * SysClkReq2Valid2         = disabled
 	 * SysClkReq3Valid2         = disabled
@@ -212,7 +275,7 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = {
 	 * SysClkReq7Valid2         = disabled
 	 * SysClkReq8Valid2         = disabled
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID2, 0x20),
+	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID2,    0xfe, 0x20),
 	/*
 	 * VTVoutEna                = disabled
 	 * Vintcore12Ena            = disabled
@@ -220,66 +283,62 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = {
 	 * Vintcore12LP             = inactive (HP)
 	 * VTVoutLP                 = inactive (HP)
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUMISC1, 0x10),
+	INIT_REGULATOR_REGISTER(AB8500_REGUMISC1,              0xfe, 0x10),
 	/*
 	 * VaudioEna                = disabled
 	 * VdmicEna                 = disabled
 	 * Vamic1Ena                = disabled
 	 * Vamic2Ena                = disabled
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_VAUDIOSUPPLY, 0x00),
+	INIT_REGULATOR_REGISTER(AB8500_VAUDIOSUPPLY,           0x1e, 0x00),
 	/*
 	 * Vamic1_dzout             = high-Z when Vamic1 is disabled
 	 * Vamic2_dzout             = high-Z when Vamic2 is disabled
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUCTRL1VAMIC, 0x00),
+	INIT_REGULATOR_REGISTER(AB8500_REGUCTRL1VAMIC,         0x03, 0x00),
 	/*
-	 * VPll                     = Hw controlled
+	 * VPll                     = Hw controlled (NOTE! PRCMU bits)
 	 * VanaRegu                 = force off
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_VPLLVANAREGU, 0x02),
+	INIT_REGULATOR_REGISTER(AB8500_VPLLVANAREGU,           0x0f, 0x02),
 	/*
 	 * VrefDDREna               = disabled
 	 * VrefDDRSleepMode         = inactive (no pulldown)
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_VREFDDR, 0x00),
+	INIT_REGULATOR_REGISTER(AB8500_VREFDDR,                0x03, 0x00),
 	/*
-	 * VextSupply1Regu          = HW control
-	 * VextSupply2Regu          = HW control
-	 * VextSupply3Regu          = HW control
+	 * VextSupply1Regu          = force LP
+	 * VextSupply2Regu          = force OFF
+	 * VextSupply3Regu          = force HP (-> STBB2=LP and TPS=LP)
 	 * ExtSupply2Bypass         = ExtSupply12LPn ball is 0 when Ena is 0
 	 * ExtSupply3Bypass         = ExtSupply3LPn ball is 0 when Ena is 0
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_EXTSUPPLYREGU, 0x2a),
+	INIT_REGULATOR_REGISTER(AB8500_EXTSUPPLYREGU,          0xff, 0x13),
 	/*
 	 * Vaux1Regu                = force HP
 	 * Vaux2Regu                = force off
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_VAUX12REGU, 0x01),
+	INIT_REGULATOR_REGISTER(AB8500_VAUX12REGU,             0x0f, 0x01),
 	/*
-	 * Vaux3regu                = force off
+	 * Vaux3Regu                = force off
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3REGU, 0x00),
+	INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3REGU,          0x03, 0x00),
 	/*
-	 * Vsmps1                   = 1.15V
+	 * Vaux1Sel                 = 2.8 V
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_VSMPS1SEL1, 0x24),
-	/*
-	 * Vaux1Sel                 = 2.5 V
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_VAUX1SEL, 0x08),
+	INIT_REGULATOR_REGISTER(AB8500_VAUX1SEL,               0x0f, 0x0C),
 	/*
 	 * Vaux2Sel                 = 2.9 V
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_VAUX2SEL, 0x0d),
+	INIT_REGULATOR_REGISTER(AB8500_VAUX2SEL,               0x0f, 0x0d),
 	/*
 	 * Vaux3Sel                 = 2.91 V
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3SEL, 0x07),
+	INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3SEL,           0x07, 0x07),
 	/*
 	 * VextSupply12LP           = disabled (no LP)
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUCTRL2SPARE, 0x00),
+	INIT_REGULATOR_REGISTER(AB8500_REGUCTRL2SPARE,         0x01, 0x00),
 	/*
 	 * Vaux1Disch               = short discharge time
 	 * Vaux2Disch               = short discharge time
@@ -288,33 +347,26 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = {
 	 * VTVoutDisch              = short discharge time
 	 * VaudioDisch              = short discharge time
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH, 0x00),
+	INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH,          0xfc, 0x00),
 	/*
 	 * VanaDisch                = short discharge time
 	 * VdmicPullDownEna         = pulldown disabled when Vdmic is disabled
 	 * VdmicDisch               = short discharge time
 	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH2, 0x00),
+	INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH2,         0x16, 0x00),
 };
 
 /* AB8500 regulators */
-struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = {
+static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = {
 	/* supplies to the display/camera */
 	[AB8500_LDO_AUX1] = {
 		.constraints = {
 			.name = "V-DISPLAY",
-			.min_uV = 2500000,
-			.max_uV = 2900000,
+			.min_uV = 2800000,
+			.max_uV = 3300000,
 			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
 					  REGULATOR_CHANGE_STATUS,
 			.boot_on = 1, /* display is on at boot */
-			/*
-			 * This voltage cannot be disabled right now because
-			 * it is somehow affecting the external MMC
-			 * functionality, though that typically will use
-			 * AUX3.
-			 */
-			.always_on = 1,
 		},
 		.num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers),
 		.consumer_supplies = ab8500_vaux1_consumers,
@@ -326,7 +378,10 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = {
 			.min_uV = 1100000,
 			.max_uV = 3300000,
 			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-					  REGULATOR_CHANGE_STATUS,
+					  REGULATOR_CHANGE_STATUS |
+					  REGULATOR_CHANGE_MODE,
+			.valid_modes_mask = REGULATOR_MODE_NORMAL |
+					    REGULATOR_MODE_IDLE,
 		},
 		.num_consumer_supplies = ARRAY_SIZE(ab8500_vaux2_consumers),
 		.consumer_supplies = ab8500_vaux2_consumers,
@@ -338,7 +393,10 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = {
 			.min_uV = 1100000,
 			.max_uV = 3300000,
 			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-					  REGULATOR_CHANGE_STATUS,
+					  REGULATOR_CHANGE_STATUS |
+					  REGULATOR_CHANGE_MODE,
+			.valid_modes_mask = REGULATOR_MODE_NORMAL |
+					    REGULATOR_MODE_IDLE,
 		},
 		.num_consumer_supplies = ARRAY_SIZE(ab8500_vaux3_consumers),
 		.consumer_supplies = ab8500_vaux3_consumers,
@@ -392,18 +450,614 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = {
 	[AB8500_LDO_INTCORE] = {
 		.constraints = {
 			.name = "V-INTCORE",
-			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+			.min_uV = 1250000,
+			.max_uV = 1350000,
+			.input_uV = 1800000,
+			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+					  REGULATOR_CHANGE_STATUS |
+					  REGULATOR_CHANGE_MODE |
+					  REGULATOR_CHANGE_DRMS,
+			.valid_modes_mask = REGULATOR_MODE_NORMAL |
+					    REGULATOR_MODE_IDLE,
 		},
 		.num_consumer_supplies = ARRAY_SIZE(ab8500_vintcore_consumers),
 		.consumer_supplies = ab8500_vintcore_consumers,
 	},
-	/* supply for U8500 CSI/DSI, VANA LDO */
+	/* supply for U8500 CSI-DSI, VANA LDO */
 	[AB8500_LDO_ANA] = {
 		.constraints = {
-			.name = "V-CSI/DSI",
+			.name = "V-CSI-DSI",
 			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
 		},
 		.num_consumer_supplies = ARRAY_SIZE(ab8500_vana_consumers),
 		.consumer_supplies = ab8500_vana_consumers,
 	},
 };
+
+/* supply for VextSupply3 */
+static struct regulator_consumer_supply ab8500_ext_supply3_consumers[] = {
+	/* SIM supply for 3 V SIM cards */
+	REGULATOR_SUPPLY("vinvsim", "sim-detect.0"),
+};
+
+/* extended configuration for VextSupply2, only used for HREFP_V20 boards */
+static struct ab8500_ext_regulator_cfg ab8500_ext_supply2 = {
+	.hwreq = true,
+};
+
+/*
+ * AB8500 external regulators
+ */
+static struct regulator_init_data ab8500_ext_regulators[] = {
+	/* fixed Vbat supplies VSMPS1_EXT_1V8 */
+	[AB8500_EXT_SUPPLY1] = {
+		.constraints = {
+			.name = "ab8500-ext-supply1",
+			.min_uV = 1800000,
+			.max_uV = 1800000,
+			.initial_mode = REGULATOR_MODE_IDLE,
+			.boot_on = 1,
+			.always_on = 1,
+		},
+	},
+	/* fixed Vbat supplies VSMPS2_EXT_1V36 and VSMPS5_EXT_1V15 */
+	[AB8500_EXT_SUPPLY2] = {
+		.constraints = {
+			.name = "ab8500-ext-supply2",
+			.min_uV = 1360000,
+			.max_uV = 1360000,
+		},
+	},
+	/* fixed Vbat supplies VSMPS3_EXT_3V4 and VSMPS4_EXT_3V4 */
+	[AB8500_EXT_SUPPLY3] = {
+		.constraints = {
+			.name = "ab8500-ext-supply3",
+			.min_uV = 3400000,
+			.max_uV = 3400000,
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+			.boot_on = 1,
+		},
+		.num_consumer_supplies =
+			ARRAY_SIZE(ab8500_ext_supply3_consumers),
+		.consumer_supplies = ab8500_ext_supply3_consumers,
+	},
+};
+
+/* ab8505 regulator register initialization */
+static struct ab8500_regulator_reg_init ab8505_reg_init[] = {
+	/*
+	 * VarmRequestCtrl
+	 * VsmpsCRequestCtrl
+	 * VsmpsARequestCtrl
+	 * VsmpsBRequestCtrl
+	 */
+	INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL1,       0x00, 0x00),
+	/*
+	 * VsafeRequestCtrl
+	 * VpllRequestCtrl
+	 * VanaRequestCtrl          = HP/LP depending on VxRequest
+	 */
+	INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL2,       0x30, 0x00),
+	/*
+	 * Vaux1RequestCtrl         = HP/LP depending on VxRequest
+	 * Vaux2RequestCtrl         = HP/LP depending on VxRequest
+	 */
+	INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL3,       0xf0, 0x00),
+	/*
+	 * Vaux3RequestCtrl         = HP/LP depending on VxRequest
+	 * SwHPReq                  = Control through SWValid disabled
+	 */
+	INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL4,       0x07, 0x00),
+	/*
+	 * VsmpsASysClkReq1HPValid
+	 * VsmpsBSysClkReq1HPValid
+	 * VsafeSysClkReq1HPValid
+	 * VanaSysClkReq1HPValid    = disabled
+	 * VpllSysClkReq1HPValid
+	 * Vaux1SysClkReq1HPValid   = disabled
+	 * Vaux2SysClkReq1HPValid   = disabled
+	 * Vaux3SysClkReq1HPValid   = disabled
+	 */
+	INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQ1HPVALID1, 0xe8, 0x00),
+	/*
+	 * VsmpsCSysClkReq1HPValid
+	 * VarmSysClkReq1HPValid
+	 * VbbSysClkReq1HPValid
+	 * VsmpsMSysClkReq1HPValid
+	 */
+	INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQ1HPVALID2, 0x00, 0x00),
+	/*
+	 * VsmpsAHwHPReq1Valid
+	 * VsmpsBHwHPReq1Valid
+	 * VsafeHwHPReq1Valid
+	 * VanaHwHPReq1Valid        = disabled
+	 * VpllHwHPReq1Valid
+	 * Vaux1HwHPreq1Valid       = disabled
+	 * Vaux2HwHPReq1Valid       = disabled
+	 * Vaux3HwHPReqValid        = disabled
+	 */
+	INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ1VALID1,     0xe8, 0x00),
+	/*
+	 * VsmpsMHwHPReq1Valid
+	 */
+	INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ1VALID2,     0x00, 0x00),
+	/*
+	 * VsmpsAHwHPReq2Valid
+	 * VsmpsBHwHPReq2Valid
+	 * VsafeHwHPReq2Valid
+	 * VanaHwHPReq2Valid        = disabled
+	 * VpllHwHPReq2Valid
+	 * Vaux1HwHPReq2Valid       = disabled
+	 * Vaux2HwHPReq2Valid       = disabled
+	 * Vaux3HwHPReq2Valid       = disabled
+	 */
+	INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ2VALID1,     0xe8, 0x00),
+	/*
+	 * VsmpsMHwHPReq2Valid
+	 */
+	INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ2VALID2,     0x00, 0x00),
+	/**
+	 * VsmpsCSwHPReqValid
+	 * VarmSwHPReqValid
+	 * VsmpsASwHPReqValid
+	 * VsmpsBSwHPReqValid
+	 * VsafeSwHPReqValid
+	 * VanaSwHPReqValid
+	 * VanaSwHPReqValid         = disabled
+	 * VpllSwHPReqValid
+	 * Vaux1SwHPReqValid        = disabled
+	 */
+	INIT_REGULATOR_REGISTER(AB8505_REGUSWHPREQVALID1,      0xa0, 0x00),
+	/*
+	 * Vaux2SwHPReqValid        = disabled
+	 * Vaux3SwHPReqValid        = disabled
+	 * VsmpsMSwHPReqValid
+	 */
+	INIT_REGULATOR_REGISTER(AB8505_REGUSWHPREQVALID2,      0x03, 0x00),
+	/*
+	 * SysClkReq2Valid1         = SysClkReq2 controlled
+	 * SysClkReq3Valid1         = disabled
+	 * SysClkReq4Valid1         = SysClkReq4 controlled
+	 */
+	INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQVALID1,    0x0e, 0x0a),
+	/*
+	 * SysClkReq2Valid2         = disabled
+	 * SysClkReq3Valid2         = disabled
+	 * SysClkReq4Valid2         = disabled
+	 */
+	INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQVALID2,    0x0e, 0x00),
+	/*
+	 * Vaux4SwHPReqValid
+	 * Vaux4HwHPReq2Valid
+	 * Vaux4HwHPReq1Valid
+	 * Vaux4SysClkReq1HPValid
+	 */
+	INIT_REGULATOR_REGISTER(AB8505_REGUVAUX4REQVALID,    0x00, 0x00),
+	/*
+	 * VadcEna                  = disabled
+	 * VintCore12Ena            = disabled
+	 * VintCore12Sel            = 1.25 V
+	 * VintCore12LP             = inactive (HP)
+	 * VadcLP                   = inactive (HP)
+	 */
+	INIT_REGULATOR_REGISTER(AB8505_REGUMISC1,              0xfe, 0x10),
+	/*
+	 * VaudioEna                = disabled
+	 * Vaux8Ena                 = disabled
+	 * Vamic1Ena                = disabled
+	 * Vamic2Ena                = disabled
+	 */
+	INIT_REGULATOR_REGISTER(AB8505_VAUDIOSUPPLY,           0x1e, 0x00),
+	/*
+	 * Vamic1_dzout             = high-Z when Vamic1 is disabled
+	 * Vamic2_dzout             = high-Z when Vamic2 is disabled
+	 */
+	INIT_REGULATOR_REGISTER(AB8505_REGUCTRL1VAMIC,         0x03, 0x00),
+	/*
+	 * VsmpsARegu
+	 * VsmpsASelCtrl
+	 * VsmpsAAutoMode
+	 * VsmpsAPWMMode
+	 */
+	INIT_REGULATOR_REGISTER(AB8505_VSMPSAREGU,    0x00, 0x00),
+	/*
+	 * VsmpsBRegu
+	 * VsmpsBSelCtrl
+	 * VsmpsBAutoMode
+	 * VsmpsBPWMMode
+	 */
+	INIT_REGULATOR_REGISTER(AB8505_VSMPSBREGU,    0x00, 0x00),
+	/*
+	 * VsafeRegu
+	 * VsafeSelCtrl
+	 * VsafeAutoMode
+	 * VsafePWMMode
+	 */
+	INIT_REGULATOR_REGISTER(AB8505_VSAFEREGU,    0x00, 0x00),
+	/*
+	 * VPll                     = Hw controlled (NOTE! PRCMU bits)
+	 * VanaRegu                 = force off
+	 */
+	INIT_REGULATOR_REGISTER(AB8505_VPLLVANAREGU,           0x0f, 0x02),
+	/*
+	 * VextSupply1Regu          = force OFF (OTP_ExtSupply12LPnPolarity 1)
+	 * VextSupply2Regu          = force OFF (OTP_ExtSupply12LPnPolarity 1)
+	 * VextSupply3Regu          = force OFF (OTP_ExtSupply3LPnPolarity 0)
+	 * ExtSupply2Bypass         = ExtSupply12LPn ball is 0 when Ena is 0
+	 * ExtSupply3Bypass         = ExtSupply3LPn ball is 0 when Ena is 0
+	 */
+	INIT_REGULATOR_REGISTER(AB8505_EXTSUPPLYREGU,          0xff, 0x30),
+	/*
+	 * Vaux1Regu                = force HP
+	 * Vaux2Regu                = force off
+	 */
+	INIT_REGULATOR_REGISTER(AB8505_VAUX12REGU,             0x0f, 0x01),
+	/*
+	 * Vaux3Regu                = force off
+	 */
+	INIT_REGULATOR_REGISTER(AB8505_VRF1VAUX3REGU,          0x03, 0x00),
+	/*
+	 * VsmpsASel1
+	 */
+	INIT_REGULATOR_REGISTER(AB8505_VSMPSASEL1,    0x00, 0x00),
+	/*
+	 * VsmpsASel2
+	 */
+	INIT_REGULATOR_REGISTER(AB8505_VSMPSASEL2,    0x00, 0x00),
+	/*
+	 * VsmpsASel3
+	 */
+	INIT_REGULATOR_REGISTER(AB8505_VSMPSASEL3,    0x00, 0x00),
+	/*
+	 * VsmpsBSel1
+	 */
+	INIT_REGULATOR_REGISTER(AB8505_VSMPSBSEL1,    0x00, 0x00),
+	/*
+	 * VsmpsBSel2
+	 */
+	INIT_REGULATOR_REGISTER(AB8505_VSMPSBSEL2,    0x00, 0x00),
+	/*
+	 * VsmpsBSel3
+	 */
+	INIT_REGULATOR_REGISTER(AB8505_VSMPSBSEL3,    0x00, 0x00),
+	/*
+	 * VsafeSel1
+	 */
+	INIT_REGULATOR_REGISTER(AB8505_VSAFESEL1,    0x00, 0x00),
+	/*
+	 * VsafeSel2
+	 */
+	INIT_REGULATOR_REGISTER(AB8505_VSAFESEL2,    0x00, 0x00),
+	/*
+	 * VsafeSel3
+	 */
+	INIT_REGULATOR_REGISTER(AB8505_VSAFESEL3,    0x00, 0x00),
+	/*
+	 * Vaux1Sel                 = 2.8 V
+	 */
+	INIT_REGULATOR_REGISTER(AB8505_VAUX1SEL,               0x0f, 0x0C),
+	/*
+	 * Vaux2Sel                 = 2.9 V
+	 */
+	INIT_REGULATOR_REGISTER(AB8505_VAUX2SEL,               0x0f, 0x0d),
+	/*
+	 * Vaux3Sel                 = 2.91 V
+	 */
+	INIT_REGULATOR_REGISTER(AB8505_VRF1VAUX3SEL,           0x07, 0x07),
+	/*
+	 * Vaux4RequestCtrl
+	 */
+	INIT_REGULATOR_REGISTER(AB8505_VAUX4REQCTRL,    0x00, 0x00),
+	/*
+	 * Vaux4Regu
+	 */
+	INIT_REGULATOR_REGISTER(AB8505_VAUX4REGU,    0x00, 0x00),
+	/*
+	 * Vaux4Sel
+	 */
+	INIT_REGULATOR_REGISTER(AB8505_VAUX4SEL,    0x00, 0x00),
+	/*
+	 * Vaux1Disch               = short discharge time
+	 * Vaux2Disch               = short discharge time
+	 * Vaux3Disch               = short discharge time
+	 * Vintcore12Disch          = short discharge time
+	 * VTVoutDisch              = short discharge time
+	 * VaudioDisch              = short discharge time
+	 */
+	INIT_REGULATOR_REGISTER(AB8505_REGUCTRLDISCH,          0xfc, 0x00),
+	/*
+	 * VanaDisch                = short discharge time
+	 * Vaux8PullDownEna         = pulldown disabled when Vaux8 is disabled
+	 * Vaux8Disch               = short discharge time
+	 */
+	INIT_REGULATOR_REGISTER(AB8505_REGUCTRLDISCH2,         0x16, 0x00),
+	/*
+	 * Vaux4Disch               = short discharge time
+	 */
+	INIT_REGULATOR_REGISTER(AB8505_REGUCTRLDISCH3,         0x01, 0x00),
+	/*
+	 * Vaux5Sel
+	 * Vaux5LP
+	 * Vaux5Ena
+	 * Vaux5Disch
+	 * Vaux5DisSfst
+	 * Vaux5DisPulld
+	 */
+	INIT_REGULATOR_REGISTER(AB8505_CTRLVAUX5,              0x00, 0x00),
+	/*
+	 * Vaux6Sel
+	 * Vaux6LP
+	 * Vaux6Ena
+	 * Vaux6DisPulld
+	 */
+	INIT_REGULATOR_REGISTER(AB8505_CTRLVAUX6,              0x00, 0x00),
+};
+
+struct regulator_init_data ab8505_regulators[AB8505_NUM_REGULATORS] = {
+	/* supplies to the display/camera */
+	[AB8505_LDO_AUX1] = {
+		.constraints = {
+			.name = "V-DISPLAY",
+			.min_uV = 2800000,
+			.max_uV = 3300000,
+			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+					  REGULATOR_CHANGE_STATUS,
+			.boot_on = 1, /* display is on at boot */
+		},
+		.num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers),
+		.consumer_supplies = ab8500_vaux1_consumers,
+	},
+	/* supplies to the on-board eMMC */
+	[AB8505_LDO_AUX2] = {
+		.constraints = {
+			.name = "V-eMMC1",
+			.min_uV = 1100000,
+			.max_uV = 3300000,
+			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+					  REGULATOR_CHANGE_STATUS |
+					  REGULATOR_CHANGE_MODE,
+			.valid_modes_mask = REGULATOR_MODE_NORMAL |
+					    REGULATOR_MODE_IDLE,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(ab8500_vaux2_consumers),
+		.consumer_supplies = ab8500_vaux2_consumers,
+	},
+	/* supply for VAUX3, supplies to SDcard slots */
+	[AB8505_LDO_AUX3] = {
+		.constraints = {
+			.name = "V-MMC-SD",
+			.min_uV = 1100000,
+			.max_uV = 3300000,
+			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+					  REGULATOR_CHANGE_STATUS |
+					  REGULATOR_CHANGE_MODE,
+			.valid_modes_mask = REGULATOR_MODE_NORMAL |
+					    REGULATOR_MODE_IDLE,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(ab8500_vaux3_consumers),
+		.consumer_supplies = ab8500_vaux3_consumers,
+	},
+	/* supply for VAUX4, supplies to NFC and standalone secure element */
+	[AB8505_LDO_AUX4] = {
+		.constraints = {
+			.name = "V-NFC-SE",
+			.min_uV = 1100000,
+			.max_uV = 3300000,
+			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+					  REGULATOR_CHANGE_STATUS |
+					  REGULATOR_CHANGE_MODE,
+			.valid_modes_mask = REGULATOR_MODE_NORMAL |
+					    REGULATOR_MODE_IDLE,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(ab8505_vaux4_consumers),
+		.consumer_supplies = ab8505_vaux4_consumers,
+	},
+	/* supply for VAUX5, supplies to TBD */
+	[AB8505_LDO_AUX5] = {
+		.constraints = {
+			.name = "V-AUX5",
+			.min_uV = 1050000,
+			.max_uV = 2790000,
+			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+					  REGULATOR_CHANGE_STATUS |
+					  REGULATOR_CHANGE_MODE,
+			.valid_modes_mask = REGULATOR_MODE_NORMAL |
+					    REGULATOR_MODE_IDLE,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(ab8505_vaux5_consumers),
+		.consumer_supplies = ab8505_vaux5_consumers,
+	},
+	/* supply for VAUX6, supplies to TBD */
+	[AB8505_LDO_AUX6] = {
+		.constraints = {
+			.name = "V-AUX6",
+			.min_uV = 1050000,
+			.max_uV = 2790000,
+			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+					  REGULATOR_CHANGE_STATUS |
+					  REGULATOR_CHANGE_MODE,
+			.valid_modes_mask = REGULATOR_MODE_NORMAL |
+					    REGULATOR_MODE_IDLE,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(ab8505_vaux6_consumers),
+		.consumer_supplies = ab8505_vaux6_consumers,
+	},
+	/* supply for gpadc, ADC LDO */
+	[AB8505_LDO_ADC] = {
+		.constraints = {
+			.name = "V-ADC",
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(ab8505_vadc_consumers),
+		.consumer_supplies = ab8505_vadc_consumers,
+	},
+	/* supply for ab8500-vaudio, VAUDIO LDO */
+	[AB8505_LDO_AUDIO] = {
+		.constraints = {
+			.name = "V-AUD",
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(ab8500_vaud_consumers),
+		.consumer_supplies = ab8500_vaud_consumers,
+	},
+	/* supply for v-anamic1 VAMic1-LDO */
+	[AB8505_LDO_ANAMIC1] = {
+		.constraints = {
+			.name = "V-AMIC1",
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS |
+					  REGULATOR_CHANGE_MODE,
+			.valid_modes_mask = REGULATOR_MODE_NORMAL |
+					    REGULATOR_MODE_IDLE,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(ab8500_vamic1_consumers),
+		.consumer_supplies = ab8500_vamic1_consumers,
+	},
+	/* supply for v-amic2, VAMIC2 LDO, reuse constants for AMIC1 */
+	[AB8505_LDO_ANAMIC2] = {
+		.constraints = {
+			.name = "V-AMIC2",
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS |
+					  REGULATOR_CHANGE_MODE,
+			.valid_modes_mask = REGULATOR_MODE_NORMAL |
+					    REGULATOR_MODE_IDLE,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(ab8500_vamic2_consumers),
+		.consumer_supplies = ab8500_vamic2_consumers,
+	},
+	/* supply for v-aux8, VAUX8 LDO */
+	[AB8505_LDO_AUX8] = {
+		.constraints = {
+			.name = "V-AUX8",
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(ab8505_vaux8_consumers),
+		.consumer_supplies = ab8505_vaux8_consumers,
+	},
+	/* supply for v-intcore12, VINTCORE12 LDO */
+	[AB8505_LDO_INTCORE] = {
+		.constraints = {
+			.name = "V-INTCORE",
+			.min_uV = 1250000,
+			.max_uV = 1350000,
+			.input_uV = 1800000,
+			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+					  REGULATOR_CHANGE_STATUS |
+					  REGULATOR_CHANGE_MODE |
+					  REGULATOR_CHANGE_DRMS,
+			.valid_modes_mask = REGULATOR_MODE_NORMAL |
+					    REGULATOR_MODE_IDLE,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(ab8500_vintcore_consumers),
+		.consumer_supplies = ab8500_vintcore_consumers,
+	},
+	/* supply for LDO USB */
+	[AB8505_LDO_USB] = {
+		.constraints = {
+			.name = "V-USB",
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS |
+					  REGULATOR_CHANGE_MODE,
+			.valid_modes_mask = REGULATOR_MODE_NORMAL |
+					    REGULATOR_MODE_IDLE,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(ab8505_usb_consumers),
+		.consumer_supplies = ab8505_usb_consumers,
+	},
+	/* supply for U8500 CSI-DSI, VANA LDO */
+	[AB8505_LDO_ANA] = {
+		.constraints = {
+			.name = "V-CSI-DSI",
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(ab8500_vana_consumers),
+		.consumer_supplies = ab8500_vana_consumers,
+	},
+};
+
+struct ab8500_regulator_platform_data ab8500_regulator_plat_data = {
+	.reg_init               = ab8500_reg_init,
+	.num_reg_init           = ARRAY_SIZE(ab8500_reg_init),
+	.regulator              = ab8500_regulators,
+	.num_regulator          = ARRAY_SIZE(ab8500_regulators),
+	.ext_regulator          = ab8500_ext_regulators,
+	.num_ext_regulator      = ARRAY_SIZE(ab8500_ext_regulators),
+};
+
+/* Use the AB8500 init settings for AB8505 as they are the same right now */
+struct ab8500_regulator_platform_data ab8505_regulator_plat_data = {
+	.reg_init               = ab8505_reg_init,
+	.num_reg_init           = ARRAY_SIZE(ab8505_reg_init),
+	.regulator              = ab8505_regulators,
+	.num_regulator          = ARRAY_SIZE(ab8505_regulators),
+};
+
+static void ab8500_modify_reg_init(int id, u8 mask, u8 value)
+{
+	int i;
+
+	if (cpu_is_u8520()) {
+		for (i = ARRAY_SIZE(ab8505_reg_init) - 1; i >= 0; i--) {
+			if (ab8505_reg_init[i].id == id) {
+				u8 initval = ab8505_reg_init[i].value;
+				initval = (initval & ~mask) | (value & mask);
+				ab8505_reg_init[i].value = initval;
+
+				BUG_ON(mask & ~ab8505_reg_init[i].mask);
+				return;
+			}
+		}
+	} else {
+		for (i = ARRAY_SIZE(ab8500_reg_init) - 1; i >= 0; i--) {
+			if (ab8500_reg_init[i].id == id) {
+				u8 initval = ab8500_reg_init[i].value;
+				initval = (initval & ~mask) | (value & mask);
+				ab8500_reg_init[i].value = initval;
+
+				BUG_ON(mask & ~ab8500_reg_init[i].mask);
+				return;
+			}
+		}
+	}
+
+	BUG_ON(1);
+}
+
+void mop500_regulator_init(void)
+{
+	struct regulator_init_data *regulator;
+
+	/*
+	 * Temporarily turn on Vaux2 on 8520 machine
+	 */
+	if (cpu_is_u8520()) {
+		/* Vaux2 initialized to be on */
+		ab8500_modify_reg_init(AB8505_VAUX12REGU, 0x0f, 0x05);
+	}
+
+	/*
+	 * Handle AB8500_EXT_SUPPLY2 on HREFP_V20_V50 boards (do it for
+	 * all HREFP_V20 boards)
+	 */
+	if (cpu_is_u8500v20()) {
+		/* VextSupply2RequestCtrl =  HP/OFF depending on VxRequest */
+		ab8500_modify_reg_init(AB8500_REGUREQUESTCTRL3, 0x01, 0x01);
+
+		/* VextSupply2SysClkReq1HPValid = SysClkReq1 controlled */
+		ab8500_modify_reg_init(AB8500_REGUSYSCLKREQ1HPVALID2,
+			0x20, 0x20);
+
+		/* VextSupply2 = force HP at initialization */
+		ab8500_modify_reg_init(AB8500_EXTSUPPLYREGU, 0x0c, 0x04);
+
+		/* enable VextSupply2 during platform active */
+		regulator = &ab8500_ext_regulators[AB8500_EXT_SUPPLY2];
+		regulator->constraints.always_on = 1;
+
+		/* disable VextSupply2 in suspend */
+		regulator = &ab8500_ext_regulators[AB8500_EXT_SUPPLY2];
+		regulator->constraints.state_mem.disabled = 1;
+		regulator->constraints.state_standby.disabled = 1;
+
+		/* enable VextSupply2 HW control (used in suspend) */
+		regulator->driver_data = (void *)&ab8500_ext_supply2;
+	}
+}

arch/arm/mach-ux500/board-mop500-regulators.h

@@ -14,10 +14,11 @@
 #include <linux/regulator/machine.h>
 #include <linux/regulator/ab8500.h>
 
-extern struct ab8500_regulator_reg_init
-ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS];
-extern struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS];
+extern struct ab8500_regulator_platform_data ab8500_regulator_plat_data;
+extern struct ab8500_regulator_platform_data ab8505_regulator_plat_data;
 extern struct regulator_init_data tps61052_regulator;
 extern struct regulator_init_data gpio_en_3v3_regulator;
 
+void mop500_regulator_init(void);
+
 #endif

arch/arm/mach-ux500/board-mop500.c

@@ -199,10 +199,7 @@ static struct platform_device snowball_sbnet_dev = {
 
 struct ab8500_platform_data ab8500_platdata = {
 	.irq_base	= MOP500_AB8500_IRQ_BASE,
-	.regulator_reg_init = ab8500_regulator_reg_init,
-	.num_regulator_reg_init	= ARRAY_SIZE(ab8500_regulator_reg_init),
-	.regulator	= ab8500_regulators,
-	.num_regulator	= ARRAY_SIZE(ab8500_regulators),
+	.regulator	= &ab8500_regulator_plat_data,
 	.gpio		= &ab8500_gpio_pdata,
 	.codec		= &ab8500_codec_pdata,
 };

drivers/regulator/Makefile

@@ -12,7 +12,7 @@ obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o
 obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o
 obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o
 obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o
-obj-$(CONFIG_REGULATOR_AB8500)	+= ab8500.o
+obj-$(CONFIG_REGULATOR_AB8500)	+= ab8500.o ab8500-ext.o
 obj-$(CONFIG_REGULATOR_AD5398) += ad5398.o
 obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o
 obj-$(CONFIG_REGULATOR_ARIZONA) += arizona-micsupp.o arizona-ldo1.o

drivers/regulator/ab8500-ext.c

@@ -0,0 +1,407 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * Authors: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
+ *
+ * This file is based on drivers/regulator/ab8500.c
+ *
+ * AB8500 external regulators
+ *
+ * ab8500-ext supports the following regulators:
+ * - VextSupply3
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include <linux/regulator/ab8500.h>
+
+/**
+ * struct ab8500_ext_regulator_info - ab8500 regulator information
+ * @dev: device pointer
+ * @desc: regulator description
+ * @rdev: regulator device
+ * @cfg: regulator configuration (extension of regulator FW configuration)
+ * @update_bank: bank to control on/off
+ * @update_reg: register to control on/off
+ * @update_mask: mask to enable/disable and set mode of regulator
+ * @update_val: bits holding the regulator current mode
+ * @update_val_hp: bits to set EN pin active (LPn pin deactive)
+ *                 normally this means high power mode
+ * @update_val_lp: bits to set EN pin active and LPn pin active
+ *                 normally this means low power mode
+ * @update_val_hw: bits to set regulator pins in HW control
+ *                 SysClkReq pins and logic will choose mode
+ */
+struct ab8500_ext_regulator_info {
+	struct device *dev;
+	struct regulator_desc desc;
+	struct regulator_dev *rdev;
+	struct ab8500_ext_regulator_cfg *cfg;
+	u8 update_bank;
+	u8 update_reg;
+	u8 update_mask;
+	u8 update_val;
+	u8 update_val_hp;
+	u8 update_val_lp;
+	u8 update_val_hw;
+};
+
+static int ab8500_ext_regulator_enable(struct regulator_dev *rdev)
+{
+	int ret;
+	struct ab8500_ext_regulator_info *info = rdev_get_drvdata(rdev);
+	u8 regval;
+
+	if (info == NULL) {
+		dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * To satisfy both HW high power request and SW request, the regulator
+	 * must be on in high power.
+	 */
+	if (info->cfg && info->cfg->hwreq)
+		regval = info->update_val_hp;
+	else
+		regval = info->update_val;
+
+	ret = abx500_mask_and_set_register_interruptible(info->dev,
+		info->update_bank, info->update_reg,
+		info->update_mask, regval);
+	if (ret < 0) {
+		dev_err(rdev_get_dev(info->rdev),
+			"couldn't set enable bits for regulator\n");
+		return ret;
+	}
+
+	dev_dbg(rdev_get_dev(rdev),
+		"%s-enable (bank, reg, mask, value): 0x%02x, 0x%02x, 0x%02x, 0x%02x\n",
+		info->desc.name, info->update_bank, info->update_reg,
+		info->update_mask, regval);
+
+	return 0;
+}
+
+static int ab8500_ext_regulator_disable(struct regulator_dev *rdev)
+{
+	int ret;
+	struct ab8500_ext_regulator_info *info = rdev_get_drvdata(rdev);
+	u8 regval;
+
+	if (info == NULL) {
+		dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Set the regulator in HW request mode if configured
+	 */
+	if (info->cfg && info->cfg->hwreq)
+		regval = info->update_val_hw;
+	else
+		regval = 0;
+
+	ret = abx500_mask_and_set_register_interruptible(info->dev,
+		info->update_bank, info->update_reg,
+		info->update_mask, regval);
+	if (ret < 0) {
+		dev_err(rdev_get_dev(info->rdev),
+			"couldn't set disable bits for regulator\n");
+		return ret;
+	}
+
+	dev_dbg(rdev_get_dev(rdev), "%s-disable (bank, reg, mask, value):"
+		" 0x%02x, 0x%02x, 0x%02x, 0x%02x\n",
+		info->desc.name, info->update_bank, info->update_reg,
+		info->update_mask, regval);
+
+	return 0;
+}
+
+static int ab8500_ext_regulator_is_enabled(struct regulator_dev *rdev)
+{
+	int ret;
+	struct ab8500_ext_regulator_info *info = rdev_get_drvdata(rdev);
+	u8 regval;
+
+	if (info == NULL) {
+		dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
+		return -EINVAL;
+	}
+
+	ret = abx500_get_register_interruptible(info->dev,
+		info->update_bank, info->update_reg, &regval);
+	if (ret < 0) {
+		dev_err(rdev_get_dev(rdev),
+			"couldn't read 0x%x register\n", info->update_reg);
+		return ret;
+	}
+
+	dev_dbg(rdev_get_dev(rdev), "%s-is_enabled (bank, reg, mask, value):"
+		" 0x%02x, 0x%02x, 0x%02x, 0x%02x\n",
+		info->desc.name, info->update_bank, info->update_reg,
+		info->update_mask, regval);
+
+	if (((regval & info->update_mask) == info->update_val_lp) ||
+	    ((regval & info->update_mask) == info->update_val_hp))
+		return 1;
+	else
+		return 0;
+}
+
+static int ab8500_ext_regulator_set_mode(struct regulator_dev *rdev,
+					 unsigned int mode)
+{
+	int ret = 0;
+	struct ab8500_ext_regulator_info *info = rdev_get_drvdata(rdev);
+	u8 regval;
+
+	if (info == NULL) {
+		dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
+		return -EINVAL;
+	}
+
+	switch (mode) {
+	case REGULATOR_MODE_NORMAL:
+		regval = info->update_val_hp;
+		break;
+	case REGULATOR_MODE_IDLE:
+		regval = info->update_val_lp;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	/* If regulator is enabled and info->cfg->hwreq is set, the regulator
+	   must be on in high power, so we don't need to write the register with
+	   the same value.
+	 */
+	if (ab8500_ext_regulator_is_enabled(rdev) &&
+	    !(info->cfg && info->cfg->hwreq)) {
+		ret = abx500_mask_and_set_register_interruptible(info->dev,
+					info->update_bank, info->update_reg,
+					info->update_mask, regval);
+		if (ret < 0) {
+			dev_err(rdev_get_dev(rdev),
+				"Could not set regulator mode.\n");
+			return ret;
+		}
+
+		dev_dbg(rdev_get_dev(rdev),
+			"%s-set_mode (bank, reg, mask, value): "
+			"0x%x, 0x%x, 0x%x, 0x%x\n",
+			info->desc.name, info->update_bank, info->update_reg,
+			info->update_mask, regval);
+	}
+
+	info->update_val = regval;
+
+	return 0;
+}
+
+static unsigned int ab8500_ext_regulator_get_mode(struct regulator_dev *rdev)
+{
+	struct ab8500_ext_regulator_info *info = rdev_get_drvdata(rdev);
+	int ret;
+
+	if (info == NULL) {
+		dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
+		return -EINVAL;
+	}
+
+	if (info->update_val == info->update_val_hp)
+		ret = REGULATOR_MODE_NORMAL;
+	else if (info->update_val == info->update_val_lp)
+		ret = REGULATOR_MODE_IDLE;
+	else
+		ret = -EINVAL;
+
+	return ret;
+}
+
+static int ab8500_ext_list_voltage(struct regulator_dev *rdev,
+				   unsigned selector)
+{
+	struct regulation_constraints *regu_constraints = rdev->constraints;
+
+	if (regu_constraints == NULL) {
+		dev_err(rdev_get_dev(rdev), "regulator constraints null pointer\n");
+		return -EINVAL;
+	}
+	/* return the uV for the fixed regulators */
+	if (regu_constraints->min_uV && regu_constraints->max_uV) {
+		if (regu_constraints->min_uV == regu_constraints->max_uV)
+			return regu_constraints->min_uV;
+	}
+	return -EINVAL;
+}
+
+static struct regulator_ops ab8500_ext_regulator_ops = {
+	.enable			= ab8500_ext_regulator_enable,
+	.disable		= ab8500_ext_regulator_disable,
+	.is_enabled		= ab8500_ext_regulator_is_enabled,
+	.set_mode		= ab8500_ext_regulator_set_mode,
+	.get_mode		= ab8500_ext_regulator_get_mode,
+	.list_voltage		= ab8500_ext_list_voltage,
+};
+
+static struct ab8500_ext_regulator_info
+		ab8500_ext_regulator_info[AB8500_NUM_EXT_REGULATORS] = {
+	[AB8500_EXT_SUPPLY1] = {
+		.desc = {
+			.name		= "VEXTSUPPLY1",
+			.ops		= &ab8500_ext_regulator_ops,
+			.type		= REGULATOR_VOLTAGE,
+			.id		= AB8500_EXT_SUPPLY1,
+			.owner		= THIS_MODULE,
+			.n_voltages	= 1,
+		},
+		.update_bank		= 0x04,
+		.update_reg		= 0x08,
+		.update_mask		= 0x03,
+		.update_val		= 0x01,
+		.update_val_hp		= 0x01,
+		.update_val_lp		= 0x03,
+		.update_val_hw		= 0x02,
+	},
+	[AB8500_EXT_SUPPLY2] = {
+		.desc = {
+			.name		= "VEXTSUPPLY2",
+			.ops		= &ab8500_ext_regulator_ops,
+			.type		= REGULATOR_VOLTAGE,
+			.id		= AB8500_EXT_SUPPLY2,
+			.owner		= THIS_MODULE,
+			.n_voltages	= 1,
+		},
+		.update_bank		= 0x04,
+		.update_reg		= 0x08,
+		.update_mask		= 0x0c,
+		.update_val		= 0x04,
+		.update_val_hp		= 0x04,
+		.update_val_lp		= 0x0c,
+		.update_val_hw		= 0x08,
+	},
+	[AB8500_EXT_SUPPLY3] = {
+		.desc = {
+			.name		= "VEXTSUPPLY3",
+			.ops		= &ab8500_ext_regulator_ops,
+			.type		= REGULATOR_VOLTAGE,
+			.id		= AB8500_EXT_SUPPLY3,
+			.owner		= THIS_MODULE,
+			.n_voltages	= 1,
+		},
+		.update_bank		= 0x04,
+		.update_reg		= 0x08,
+		.update_mask		= 0x30,
+		.update_val		= 0x10,
+		.update_val_hp		= 0x10,
+		.update_val_lp		= 0x30,
+		.update_val_hw		= 0x20,
+	},
+};
+
+int ab8500_ext_regulator_init(struct platform_device *pdev)
+{
+	struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
+	struct ab8500_platform_data *ppdata;
+	struct ab8500_regulator_platform_data *pdata;
+	struct regulator_config config = { };
+	int i, err;
+
+	if (!ab8500) {
+		dev_err(&pdev->dev, "null mfd parent\n");
+		return -EINVAL;
+	}
+	ppdata = dev_get_platdata(ab8500->dev);
+	if (!ppdata) {
+		dev_err(&pdev->dev, "null parent pdata\n");
+		return -EINVAL;
+	}
+
+	pdata = ppdata->regulator;
+	if (!pdata) {
+		dev_err(&pdev->dev, "null pdata\n");
+		return -EINVAL;
+	}
+
+	/* make sure the platform data has the correct size */
+	if (pdata->num_ext_regulator != ARRAY_SIZE(ab8500_ext_regulator_info)) {
+		dev_err(&pdev->dev, "Configuration error: size mismatch.\n");
+		return -EINVAL;
+	}
+
+	/* check for AB8500 2.x */
+	if (is_ab8500_2p0_or_earlier(ab8500)) {
+		struct ab8500_ext_regulator_info *info;
+
+		/* VextSupply3LPn is inverted on AB8500 2.x */
+		info = &ab8500_ext_regulator_info[AB8500_EXT_SUPPLY3];
+		info->update_val = 0x30;
+		info->update_val_hp = 0x30;
+		info->update_val_lp = 0x10;
+	}
+
+	/* register all regulators */
+	for (i = 0; i < ARRAY_SIZE(ab8500_ext_regulator_info); i++) {
+		struct ab8500_ext_regulator_info *info = NULL;
+
+		/* assign per-regulator data */
+		info = &ab8500_ext_regulator_info[i];
+		info->dev = &pdev->dev;
+		info->cfg = (struct ab8500_ext_regulator_cfg *)
+			pdata->ext_regulator[i].driver_data;
+
+		config.dev = &pdev->dev;
+		config.init_data = &pdata->ext_regulator[i];
+		config.driver_data = info;
+
+		/* register regulator with framework */
+		info->rdev = regulator_register(&info->desc, &config);
+		if (IS_ERR(info->rdev)) {
+			err = PTR_ERR(info->rdev);
+			dev_err(&pdev->dev, "failed to register regulator %s\n",
+					info->desc.name);
+			/* when we fail, un-register all earlier regulators */
+			while (--i >= 0) {
+				info = &ab8500_ext_regulator_info[i];
+				regulator_unregister(info->rdev);
+			}
+			return err;
+		}
+
+		dev_dbg(rdev_get_dev(info->rdev),
+			"%s-probed\n", info->desc.name);
+	}
+
+	return 0;
+}
+
+void ab8500_ext_regulator_exit(struct platform_device *pdev)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(ab8500_ext_regulator_info); i++) {
+		struct ab8500_ext_regulator_info *info = NULL;
+		info = &ab8500_ext_regulator_info[i];
+
+		dev_vdbg(rdev_get_dev(info->rdev),
+			"%s-remove\n", info->desc.name);
+
+		regulator_unregister(info->rdev);
+	}
+}
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Bengt Jonsson <bengt.g.jonsson@stericsson.com>");
+MODULE_DESCRIPTION("AB8500 external regulator driver");
+MODULE_ALIAS("platform:ab8500-ext-regulator");

drivers/regulator/dbx500-prcmu.h

@@ -21,7 +21,6 @@
  * @is_enabled: status of the regulator
  * @epod_id: id for EPOD (power domain)
  * @is_ramret: RAM retention switch for EPOD (power domain)
- * @operating_point: operating point (only for vape, to be removed)
  *
  */
 struct dbx500_regulator_info {
@@ -32,7 +31,6 @@ struct dbx500_regulator_info {
 	u16 epod_id;
 	bool is_ramret;
 	bool exclude_from_power_state;
-	unsigned int operating_point;
 };
 
 void power_state_active_enable(void);

include/linux/mfd/abx500/ab8500.h

@@ -364,8 +364,7 @@ struct ab8500 {
 	const int *irq_reg_offset;
 };
 
-struct regulator_reg_init;
-struct regulator_init_data;
+struct ab8500_regulator_platform_data;
 struct ab8500_gpio_platform_data;
 struct ab8500_codec_platform_data;
 struct ab8500_sysctrl_platform_data;
@@ -375,19 +374,13 @@ struct ab8500_sysctrl_platform_data;
  * @irq_base: start of AB8500 IRQs, AB8500_NR_IRQS will be used
  * @pm_power_off: Should machine pm power off hook be registered or not
  * @init: board-specific initialization after detection of ab8500
- * @num_regulator_reg_init: number of regulator init registers
- * @regulator_reg_init: regulator init registers
- * @num_regulator: number of regulators
  * @regulator: machine-specific constraints for regulators
  */
 struct ab8500_platform_data {
 	int irq_base;
 	bool pm_power_off;
 	void (*init) (struct ab8500 *);
-	int num_regulator_reg_init;
-	struct ab8500_regulator_reg_init *regulator_reg_init;
-	int num_regulator;
-	struct regulator_init_data *regulator;
+	struct ab8500_regulator_platform_data *regulator;
 	struct abx500_gpio_platform_data *gpio;
 	struct ab8500_codec_platform_data *codec;
 	struct ab8500_sysctrl_platform_data *sysctrl;

include/linux/regulator/ab8500.h

@@ -5,11 +5,14 @@
  *
  * Authors: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson
  *          Bengt Jonsson <bengt.g.jonsson@stericsson.com> for ST-Ericsson
+ *          Daniel Willerud <daniel.willerud@stericsson.com> for ST-Ericsson
  */
 
 #ifndef __LINUX_MFD_AB8500_REGULATOR_H
 #define __LINUX_MFD_AB8500_REGULATOR_H
 
+#include <linux/platform_device.h>
+
 /* AB8500 regulators */
 enum ab8500_regulator_id {
 	AB8500_LDO_AUX1,
@@ -17,7 +20,6 @@ enum ab8500_regulator_id {
 	AB8500_LDO_AUX3,
 	AB8500_LDO_INTCORE,
 	AB8500_LDO_TVOUT,
-	AB8500_LDO_USB,
 	AB8500_LDO_AUDIO,
 	AB8500_LDO_ANAMIC1,
 	AB8500_LDO_ANAMIC2,
@@ -26,7 +28,28 @@ enum ab8500_regulator_id {
 	AB8500_NUM_REGULATORS,
 };
 
-/* AB9450 regulators */
+/* AB8505 regulators */
+enum ab8505_regulator_id {
+	AB8505_LDO_AUX1,
+	AB8505_LDO_AUX2,
+	AB8505_LDO_AUX3,
+	AB8505_LDO_AUX4,
+	AB8505_LDO_AUX5,
+	AB8505_LDO_AUX6,
+	AB8505_LDO_INTCORE,
+	AB8505_LDO_ADC,
+	AB8505_LDO_USB,
+	AB8505_LDO_AUDIO,
+	AB8505_LDO_ANAMIC1,
+	AB8505_LDO_ANAMIC2,
+	AB8505_LDO_AUX8,
+	AB8505_LDO_ANA,
+	AB8505_SYSCLKREQ_2,
+	AB8505_SYSCLKREQ_4,
+	AB8505_NUM_REGULATORS,
+};
+
+/* AB9540 regulators */
 enum ab9540_regulator_id {
 	AB9540_LDO_AUX1,
 	AB9540_LDO_AUX2,
@@ -45,16 +68,39 @@ enum ab9540_regulator_id {
 	AB9540_NUM_REGULATORS,
 };
 
-/* AB8500 and AB9540 register initialization */
+/* AB8540 regulators */
+enum ab8540_regulator_id {
+	AB8540_LDO_AUX1,
+	AB8540_LDO_AUX2,
+	AB8540_LDO_AUX3,
+	AB8540_LDO_AUX4,
+	AB8540_LDO_AUX5,
+	AB8540_LDO_AUX6,
+	AB8540_LDO_INTCORE,
+	AB8540_LDO_TVOUT,
+	AB8540_LDO_AUDIO,
+	AB8540_LDO_ANAMIC1,
+	AB8540_LDO_ANAMIC2,
+	AB8540_LDO_DMIC,
+	AB8540_LDO_ANA,
+	AB8540_LDO_SDIO,
+	AB8540_SYSCLKREQ_2,
+	AB8540_SYSCLKREQ_4,
+	AB8540_NUM_REGULATORS,
+};
+
+/* AB8500, AB8505, and AB9540 register initialization */
 struct ab8500_regulator_reg_init {
 	int id;
+	u8 mask;
 	u8 value;
 };
 
-#define INIT_REGULATOR_REGISTER(_id, _value)	\
-	{					\
-		.id = _id,			\
-		.value = _value,		\
+#define INIT_REGULATOR_REGISTER(_id, _mask, _value)	\
+	{						\
+		.id = _id,				\
+		.mask = _mask,				\
+		.value = _value,			\
 	}
 
 /* AB8500 registers */
@@ -86,10 +132,58 @@ enum ab8500_regulator_reg {
 	AB8500_REGUCTRL2SPARE,
 	AB8500_REGUCTRLDISCH,
 	AB8500_REGUCTRLDISCH2,
-	AB8500_VSMPS1SEL1,
 	AB8500_NUM_REGULATOR_REGISTERS,
 };
 
+/* AB8505 registers */
+enum ab8505_regulator_reg {
+	AB8505_REGUREQUESTCTRL1,
+	AB8505_REGUREQUESTCTRL2,
+	AB8505_REGUREQUESTCTRL3,
+	AB8505_REGUREQUESTCTRL4,
+	AB8505_REGUSYSCLKREQ1HPVALID1,
+	AB8505_REGUSYSCLKREQ1HPVALID2,
+	AB8505_REGUHWHPREQ1VALID1,
+	AB8505_REGUHWHPREQ1VALID2,
+	AB8505_REGUHWHPREQ2VALID1,
+	AB8505_REGUHWHPREQ2VALID2,
+	AB8505_REGUSWHPREQVALID1,
+	AB8505_REGUSWHPREQVALID2,
+	AB8505_REGUSYSCLKREQVALID1,
+	AB8505_REGUSYSCLKREQVALID2,
+	AB8505_REGUVAUX4REQVALID,
+	AB8505_REGUMISC1,
+	AB8505_VAUDIOSUPPLY,
+	AB8505_REGUCTRL1VAMIC,
+	AB8505_VSMPSAREGU,
+	AB8505_VSMPSBREGU,
+	AB8505_VSAFEREGU, /* NOTE! PRCMU register */
+	AB8505_VPLLVANAREGU,
+	AB8505_EXTSUPPLYREGU,
+	AB8505_VAUX12REGU,
+	AB8505_VRF1VAUX3REGU,
+	AB8505_VSMPSASEL1,
+	AB8505_VSMPSASEL2,
+	AB8505_VSMPSASEL3,
+	AB8505_VSMPSBSEL1,
+	AB8505_VSMPSBSEL2,
+	AB8505_VSMPSBSEL3,
+	AB8505_VSAFESEL1, /* NOTE! PRCMU register */
+	AB8505_VSAFESEL2, /* NOTE! PRCMU register */
+	AB8505_VSAFESEL3, /* NOTE! PRCMU register */
+	AB8505_VAUX1SEL,
+	AB8505_VAUX2SEL,
+	AB8505_VRF1VAUX3SEL,
+	AB8505_VAUX4REQCTRL,
+	AB8505_VAUX4REGU,
+	AB8505_VAUX4SEL,
+	AB8505_REGUCTRLDISCH,
+	AB8505_REGUCTRLDISCH2,
+	AB8505_REGUCTRLDISCH3,
+	AB8505_CTRLVAUX5,
+	AB8505_CTRLVAUX6,
+	AB8505_NUM_REGULATOR_REGISTERS,
+};
 
 /* AB9540 registers */
 enum ab9540_regulator_reg {
@@ -139,4 +233,111 @@ enum ab9540_regulator_reg {
 	AB9540_NUM_REGULATOR_REGISTERS,
 };
 
+/* AB8540 registers */
+enum ab8540_regulator_reg {
+	AB8540_REGUREQUESTCTRL1,
+	AB8540_REGUREQUESTCTRL2,
+	AB8540_REGUREQUESTCTRL3,
+	AB8540_REGUREQUESTCTRL4,
+	AB8540_REGUSYSCLKREQ1HPVALID1,
+	AB8540_REGUSYSCLKREQ1HPVALID2,
+	AB8540_REGUHWHPREQ1VALID1,
+	AB8540_REGUHWHPREQ1VALID2,
+	AB8540_REGUHWHPREQ2VALID1,
+	AB8540_REGUHWHPREQ2VALID2,
+	AB8540_REGUSWHPREQVALID1,
+	AB8540_REGUSWHPREQVALID2,
+	AB8540_REGUSYSCLKREQVALID1,
+	AB8540_REGUSYSCLKREQVALID2,
+	AB8540_REGUVAUX4REQVALID,
+	AB8540_REGUVAUX5REQVALID,
+	AB8540_REGUVAUX6REQVALID,
+	AB8540_REGUVCLKBREQVALID,
+	AB8540_REGUVRF1REQVALID,
+	AB8540_REGUMISC1,
+	AB8540_VAUDIOSUPPLY,
+	AB8540_REGUCTRL1VAMIC,
+	AB8540_VHSIC,
+	AB8540_VSDIO,
+	AB8540_VSMPS1REGU,
+	AB8540_VSMPS2REGU,
+	AB8540_VSMPS3REGU,
+	AB8540_VPLLVANAREGU,
+	AB8540_EXTSUPPLYREGU,
+	AB8540_VAUX12REGU,
+	AB8540_VRF1VAUX3REGU,
+	AB8540_VSMPS1SEL1,
+	AB8540_VSMPS1SEL2,
+	AB8540_VSMPS1SEL3,
+	AB8540_VSMPS2SEL1,
+	AB8540_VSMPS2SEL2,
+	AB8540_VSMPS2SEL3,
+	AB8540_VSMPS3SEL1,
+	AB8540_VSMPS3SEL2,
+	AB8540_VAUX1SEL,
+	AB8540_VAUX2SEL,
+	AB8540_VRF1VAUX3SEL,
+	AB8540_REGUCTRL2SPARE,
+	AB8540_VAUX4REQCTRL,
+	AB8540_VAUX4REGU,
+	AB8540_VAUX4SEL,
+	AB8540_VAUX5REQCTRL,
+	AB8540_VAUX5REGU,
+	AB8540_VAUX5SEL,
+	AB8540_VAUX6REQCTRL,
+	AB8540_VAUX6REGU,
+	AB8540_VAUX6SEL,
+	AB8540_VCLKBREQCTRL,
+	AB8540_VCLKBREGU,
+	AB8540_VCLKBSEL,
+	AB8540_VRF1REQCTRL,
+	AB8540_REGUCTRLDISCH,
+	AB8540_REGUCTRLDISCH2,
+	AB8540_REGUCTRLDISCH3,
+	AB8540_REGUCTRLDISCH4,
+	AB8540_VSIMSYSCLKCTRL,
+	AB8540_VANAVPLLSEL,
+	AB8540_NUM_REGULATOR_REGISTERS,
+};
+
+/* AB8500 external regulators */
+struct ab8500_ext_regulator_cfg {
+	bool hwreq; /* requires hw mode or high power mode */
+};
+
+enum ab8500_ext_regulator_id {
+	AB8500_EXT_SUPPLY1,
+	AB8500_EXT_SUPPLY2,
+	AB8500_EXT_SUPPLY3,
+	AB8500_NUM_EXT_REGULATORS,
+};
+
+/* AB8500 regulator platform data */
+struct ab8500_regulator_platform_data {
+	int num_reg_init;
+	struct ab8500_regulator_reg_init *reg_init;
+	int num_regulator;
+	struct regulator_init_data *regulator;
+	int num_ext_regulator;
+	struct regulator_init_data *ext_regulator;
+};
+
+#ifdef CONFIG_REGULATOR_AB8500_DEBUG
+int ab8500_regulator_debug_init(struct platform_device *pdev);
+int ab8500_regulator_debug_exit(struct platform_device *pdev);
+#else
+static inline int ab8500_regulator_debug_init(struct platform_device *pdev)
+{
+	return 0;
+}
+static inline int ab8500_regulator_debug_exit(struct platform_device *pdev)
+{
+	return 0;
+}
+#endif
+
+/* AB8500 external regulator functions. */
+int ab8500_ext_regulator_init(struct platform_device *pdev);
+void ab8500_ext_regulator_exit(struct platform_device *pdev);
+
 #endif