|
@@ -1185,6 +1185,54 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
|
|
|
|
|
|
|
|
This module supports multiple devices and PnP.
|
|
This module supports multiple devices and PnP.
|
|
|
|
|
|
|
|
|
|
+ Module snd-msnd-classic
|
|
|
|
|
+ -----------------------
|
|
|
|
|
+
|
|
|
|
|
+ Module for Turtle Beach MultiSound Classic, Tahiti or Monterey
|
|
|
|
|
+ soundcards.
|
|
|
|
|
+
|
|
|
|
|
+ io - Port # for msnd-classic card
|
|
|
|
|
+ irq - IRQ # for msnd-classic card
|
|
|
|
|
+ mem - Memory address (0xb0000, 0xc8000, 0xd0000, 0xd8000,
|
|
|
|
|
+ 0xe0000 or 0xe8000)
|
|
|
|
|
+ write_ndelay - enable write ndelay (default = 1)
|
|
|
|
|
+ calibrate_signal - calibrate signal (default = 0)
|
|
|
|
|
+ isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
|
|
|
|
|
+ digital - Digital daughterboard present (default = 0)
|
|
|
|
|
+ cfg - Config port (0x250, 0x260 or 0x270) default = PnP
|
|
|
|
|
+ reset - Reset all devices
|
|
|
|
|
+ mpu_io - MPU401 I/O port
|
|
|
|
|
+ mpu_irq - MPU401 irq#
|
|
|
|
|
+ ide_io0 - IDE port #0
|
|
|
|
|
+ ide_io1 - IDE port #1
|
|
|
|
|
+ ide_irq - IDE irq#
|
|
|
|
|
+ joystick_io - Joystick I/O port
|
|
|
|
|
+
|
|
|
|
|
+ The driver requires firmware files "turtlebeach/msndinit.bin" and
|
|
|
|
|
+ "turtlebeach/msndperm.bin" in the proper firmware directory.
|
|
|
|
|
+
|
|
|
|
|
+ See Documentation/sound/oss/MultiSound for important information
|
|
|
|
|
+ about this driver. Note that it has been discontinued, but the
|
|
|
|
|
+ Voyetra Turtle Beach knowledge base entry for it is still available
|
|
|
|
|
+ at
|
|
|
|
|
+ http://www.turtlebeach.com/site/kb_ftp/790.asp
|
|
|
|
|
+
|
|
|
|
|
+ Module snd-msnd-pinnacle
|
|
|
|
|
+ ------------------------
|
|
|
|
|
+
|
|
|
|
|
+ Module for Turtle Beach MultiSound Pinnacle/Fiji soundcards.
|
|
|
|
|
+
|
|
|
|
|
+ io - Port # for pinnacle/fiji card
|
|
|
|
|
+ irq - IRQ # for pinnalce/fiji card
|
|
|
|
|
+ mem - Memory address (0xb0000, 0xc8000, 0xd0000, 0xd8000,
|
|
|
|
|
+ 0xe0000 or 0xe8000)
|
|
|
|
|
+ write_ndelay - enable write ndelay (default = 1)
|
|
|
|
|
+ calibrate_signal - calibrate signal (default = 0)
|
|
|
|
|
+ isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
|
|
|
|
|
+
|
|
|
|
|
+ The driver requires firmware files "turtlebeach/pndspini.bin" and
|
|
|
|
|
+ "turtlebeach/pndsperm.bin" in the proper firmware directory.
|
|
|
|
|
+
|
|
|
Module snd-mtpav
|
|
Module snd-mtpav
|
|
|
----------------
|
|
----------------
|
|
|
|
|
|
Takashi Iwai