wimax/i2400m: introduce i2400m_reset(), stopping TX and carrier

Currently the i2400m driver was resetting by just calling
i2400m->bus_reset(). However, this was missing stopping the TX queue
and downing the carrier. This was causing, for the corner case of the
driver reseting a device that refuses to go out of idle mode, that a
few packets would be queued and more than one reset would go through,
making the recovery a wee bit messy.

To avoid introducing the same cleanup in all the bus-specific driver,
introduced a i2400m_reset() function that takes care of house cleaning
and then calling the bus-level reset implementation.

The bulk of the changes in all files are just to rename the call from
i2400m->bus_reset() to i2400m_reset().

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>

drivers/net/wimax/i2400m/control.c

@@ -54,7 +54,7 @@
  *   i2400m_set_init_config()
  *   i2400m_cmd_get_state()
  * i2400m_dev_shutdown()        Called by i2400m_dev_stop()
- *   i2400m->bus_reset()
+ *   i2400m_reset()
  *
  * i2400m_{cmd,get,set}_*()
  *   i2400m_msg_to_dev()
@@ -343,7 +343,7 @@ void i2400m_report_tlv_system_state(struct i2400m *i2400m,
 		/* Huh? just in case, shut it down */
 		dev_err(dev, "HW BUG? unknown state %u: shutting down\n",
 			i2400m_state);
-		i2400m->bus_reset(i2400m, I2400M_RT_WARM);
+		i2400m_reset(i2400m, I2400M_RT_WARM);
 		break;
 	};
 	d_fnend(3, dev, "(i2400m %p ss %p [%u]) = void\n",

drivers/net/wimax/i2400m/debugfs.c

@@ -214,7 +214,7 @@ int debugfs_i2400m_reset_set(void *data, u64 val)
 	case I2400M_RT_WARM:
 	case I2400M_RT_COLD:
 	case I2400M_RT_BUS:
-		result = i2400m->bus_reset(i2400m, rt);
+		result = i2400m_reset(i2400m, rt);
 		if (result >= 0)
 			result = 0;
 	default:

drivers/net/wimax/i2400m/driver.c

@@ -255,7 +255,7 @@ int i2400m_op_reset(struct wimax_dev *wimax_dev)
 	mutex_lock(&i2400m->init_mutex);
 	i2400m->reset_ctx = &ctx;
 	mutex_unlock(&i2400m->init_mutex);
-	result = i2400m->bus_reset(i2400m, I2400M_RT_WARM);
+	result = i2400m_reset(i2400m, I2400M_RT_WARM);
 	if (result < 0)
 		goto out;
 	result = wait_for_completion_timeout(&ctx.completion, 4*HZ);
@@ -710,7 +710,7 @@ out_unlock:
 	mutex_unlock(&i2400m->init_mutex);
 	if (result == -EUCLEAN) {
 		/* ops, need to clean up [w/ init_mutex not held] */
-		result = i2400m->bus_reset(i2400m, I2400M_RT_BUS);
+		result = i2400m_reset(i2400m, I2400M_RT_BUS);
 		if (result >= 0)
 			result = -ENODEV;
 	}
@@ -815,6 +815,24 @@ void i2400m_init(struct i2400m *i2400m)
 EXPORT_SYMBOL_GPL(i2400m_init);
 
 
+int i2400m_reset(struct i2400m *i2400m, enum i2400m_reset_type rt)
+{
+	struct net_device *net_dev = i2400m->wimax_dev.net_dev;
+
+	/*
+	 * Make sure we stop TXs and down the carrier before
+	 * resetting; this is needed to avoid things like
+	 * i2400m_wake_tx() scheduling stuff in parallel.
+	 */
+	if (net_dev->reg_state == NETREG_REGISTERED) {
+		netif_tx_disable(net_dev);
+		netif_carrier_off(net_dev);
+	}
+	return i2400m->bus_reset(i2400m, rt);
+}
+EXPORT_SYMBOL_GPL(i2400m_reset);
+
+
 /**
  * i2400m_setup - bus-generic setup function for the i2400m device
  *

drivers/net/wimax/i2400m/fw.c

@@ -130,7 +130,7 @@
  * i2400m_fw_dnload
  *   i2400m_bootrom_init
  *     i2400m_bm_cmd
- *     i2400m->bus_reset
+ *     i2400m_reset
  *   i2400m_dnload_init
  *     i2400m_dnload_init_signed
  *     i2400m_dnload_init_nonsigned
@@ -902,7 +902,7 @@ do_reboot:
 	d_printf(4, dev, "device reboot: reboot command [%d # left]\n",
 		 count);
 	if ((flags & I2400M_BRI_NO_REBOOT) == 0)
-		i2400m->bus_reset(i2400m, I2400M_RT_WARM);
+		i2400m_reset(i2400m, I2400M_RT_WARM);
 	result = i2400m_bm_cmd(i2400m, NULL, 0, &ack, sizeof(ack),
 			       I2400M_BM_CMD_RAW);
 	flags &= ~I2400M_BRI_NO_REBOOT;

drivers/net/wimax/i2400m/i2400m.h

@@ -717,6 +717,7 @@ unsigned i2400m_brh_get_signature(const struct i2400m_bootrom_header *hdr)
  * Driver / device setup and internal functions
  */
 extern void i2400m_init(struct i2400m *);
+extern int i2400m_reset(struct i2400m *, enum i2400m_reset_type);
 extern void i2400m_netdev_setup(struct net_device *net_dev);
 extern int i2400m_sysfs_setup(struct device_driver *);
 extern void i2400m_sysfs_release(struct device_driver *);

drivers/net/wimax/i2400m/netdev.c

@@ -171,8 +171,9 @@ void i2400m_wake_tx_work(struct work_struct *ws)
 		result = 0;
 	if (result < 0) {
 		dev_err(dev, "WAKE&TX: device didn't get out of idle: "
-			"%d\n", result);
-			goto error;
+			"%d - resetting\n", result);
+		i2400m_reset(i2400m, I2400M_RT_BUS);
+		goto error;
 	}
 	result = wait_event_timeout(i2400m->state_wq,
 				    i2400m->state != I2400M_SS_IDLE, 5 * HZ);
@@ -180,7 +181,8 @@ void i2400m_wake_tx_work(struct work_struct *ws)
 		result = -ETIMEDOUT;
 	if (result < 0) {
 		dev_err(dev, "WAKE&TX: error waiting for device to exit IDLE: "
-			"%d\n", result);
+			"%d - resetting\n", result);
+		i2400m_reset(i2400m, I2400M_RT_BUS);
 		goto error;
 	}
 	msleep(20);	/* device still needs some time or it drops it */

drivers/net/wimax/i2400m/rx.c

@@ -828,7 +828,7 @@ void i2400m_roq_queue(struct i2400m *i2400m, struct i2400m_roq *roq,
 		dev_err(dev, "SW BUG? queue nsn %d (lbn %u ws %u)\n",
 			nsn, lbn, roq->ws);
 		i2400m_roq_log_dump(i2400m, roq);
-		i2400m->bus_reset(i2400m, I2400M_RT_WARM);
+		i2400m_reset(i2400m, I2400M_RT_WARM);
 	} else {
 		__i2400m_roq_queue(i2400m, roq, skb, lbn, nsn);
 		i2400m_roq_log_add(i2400m, roq, I2400M_RO_TYPE_PACKET,
@@ -894,7 +894,7 @@ void i2400m_roq_queue_update_ws(struct i2400m *i2400m, struct i2400m_roq *roq,
 		dev_err(dev, "SW BUG? queue_update_ws nsn %u (sn %u ws %u)\n",
 			nsn, sn, roq->ws);
 		i2400m_roq_log_dump(i2400m, roq);
-		i2400m->bus_reset(i2400m, I2400M_RT_WARM);
+		i2400m_reset(i2400m, I2400M_RT_WARM);
 	} else {
 		/* if the queue is empty, don't bother as we'd queue
 		 * it and inmediately unqueue it -- just deliver it */

drivers/net/wimax/i2400m/sdio.c

@@ -43,7 +43,7 @@
  *     i2400m_release()
  *     free_netdev(net_dev)
  *
- * i2400ms_bus_reset()            Called by i2400m->bus_reset
+ * i2400ms_bus_reset()            Called by i2400m_reset
  *   __i2400ms_reset()
  *     __i2400ms_send_barker()
  */
@@ -342,13 +342,6 @@ int i2400ms_bus_reset(struct i2400m *i2400m, enum i2400m_reset_type rt)
 					       sizeof(i2400m_COLD_BOOT_BARKER));
 	else if (rt == I2400M_RT_BUS) {
 do_bus_reset:
-		/* call netif_tx_disable() before sending IOE disable,
-		 * so that all the tx from network layer are stopped
-		 * while IOE is being reset. Make sure it is called
-		 * only after register_netdev() was issued.
-		 */
-		if (i2400m->wimax_dev.net_dev->reg_state == NETREG_REGISTERED)
-			netif_tx_disable(i2400m->wimax_dev.net_dev);
 
 		i2400ms_bus_release(i2400m);
 

drivers/net/wimax/i2400m/usb.c

@@ -58,7 +58,7 @@
  *   i2400mu_rx_release()
  *   i2400mu_tx_release()
  *
- * i2400mu_bus_reset()            Called by i2400m->bus_reset
+ * i2400mu_bus_reset()            Called by i2400m_reset
  *   __i2400mu_reset()
  *     __i2400mu_send_barker()
  *   usb_reset_device()