Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: isp1362: fix build failure on ARM systems via irq_flags cleanup
  USB: isp1362: better 64bit printf warning fixes
  USB: fix usbstorage for 2770:915d delivers no FAT
  USB: Fix level of isp1760 Reloading ptd error message
  USB: FHCI: avoid NULL pointer dereference
  USB: Fix duplicate sysfs problem after device reset.
  USB: add speed values for USB 3.0 and wireless controllers
  USB: add missing delay during remote wakeup
  USB: EHCI & UHCI: fix race between root-hub suspend and port resume
  USB: EHCI: fix handling of unusual interrupt intervals
  USB: Don't use GFP_KERNEL while we cannot reset a storage device
  USB: fix bitmask merge error
  usb: serial: fix memory leak in generic driver
  USB: serial: fix USB serial fix kfifo_len locking

drivers/usb/core/devices.c

@@ -494,7 +494,7 @@ static ssize_t usb_device_dump(char __user **buffer, size_t *nbytes,
 		return 0;
 	/* allocate 2^1 pages = 8K (on i386);
 	 * should be more than enough for one device */
-	pages_start = (char *)__get_free_pages(GFP_KERNEL, 1);
+	pages_start = (char *)__get_free_pages(GFP_NOIO, 1);
 	if (!pages_start)
 		return -ENOMEM;
 

drivers/usb/core/hcd.c

@@ -1684,6 +1684,24 @@ int usb_hcd_alloc_bandwidth(struct usb_device *udev,
 		}
 	}
 	if (cur_alt && new_alt) {
+		struct usb_interface *iface = usb_ifnum_to_if(udev,
+				cur_alt->desc.bInterfaceNumber);
+
+		if (iface->resetting_device) {
+			/*
+			 * The USB core just reset the device, so the xHCI host
+			 * and the device will think alt setting 0 is installed.
+			 * However, the USB core will pass in the alternate
+			 * setting installed before the reset as cur_alt.  Dig
+			 * out the alternate setting 0 structure, or the first
+			 * alternate setting if a broken device doesn't have alt
+			 * setting 0.
+			 */
+			cur_alt = usb_altnum_to_altsetting(iface, 0);
+			if (!cur_alt)
+				cur_alt = &iface->altsetting[0];
+		}
+
 		/* Drop all the endpoints in the current alt setting */
 		for (i = 0; i < cur_alt->desc.bNumEndpoints; i++) {
 			ret = hcd->driver->drop_endpoint(hcd, udev,

drivers/usb/core/hub.c

@@ -3347,6 +3347,9 @@ static void hub_events(void)
 					USB_PORT_FEAT_C_SUSPEND);
 				udev = hdev->children[i-1];
 				if (udev) {
+					/* TRSMRCY = 10 msec */
+					msleep(10);
+
 					usb_lock_device(udev);
 					ret = remote_wakeup(hdev->
 							children[i-1]);
@@ -3692,19 +3695,14 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
 			usb_enable_interface(udev, intf, true);
 			ret = 0;
 		} else {
-			/* We've just reset the device, so it will think alt
-			 * setting 0 is installed.  For usb_set_interface() to
-			 * work properly, we need to set the current alternate
-			 * interface setting to 0 (or the first alt setting, if
-			 * the device doesn't have alt setting 0).
+			/* Let the bandwidth allocation function know that this
+			 * device has been reset, and it will have to use
+			 * alternate setting 0 as the current alternate setting.
 			 */
-			intf->cur_altsetting =
-				usb_find_alt_setting(config, i, 0);
-			if (!intf->cur_altsetting)
-				intf->cur_altsetting =
-					&config->intf_cache[i]->altsetting[0];
+			intf->resetting_device = 1;
 			ret = usb_set_interface(udev, desc->bInterfaceNumber,
 					desc->bAlternateSetting);
+			intf->resetting_device = 0;
 		}
 		if (ret < 0) {
 			dev_err(&udev->dev, "failed to restore interface %d "

drivers/usb/core/message.c

@@ -906,11 +906,11 @@ char *usb_cache_string(struct usb_device *udev, int index)
 	if (index <= 0)
 		return NULL;
 
-	buf = kmalloc(MAX_USB_STRING_SIZE, GFP_KERNEL);
+	buf = kmalloc(MAX_USB_STRING_SIZE, GFP_NOIO);
 	if (buf) {
 		len = usb_string(udev, index, buf, MAX_USB_STRING_SIZE);
 		if (len > 0) {
-			smallbuf = kmalloc(++len, GFP_KERNEL);
+			smallbuf = kmalloc(++len, GFP_NOIO);
 			if (!smallbuf)
 				return buf;
 			memcpy(smallbuf, buf, len);
@@ -1731,7 +1731,7 @@ int usb_set_configuration(struct usb_device *dev, int configuration)
 	if (cp) {
 		nintf = cp->desc.bNumInterfaces;
 		new_interfaces = kmalloc(nintf * sizeof(*new_interfaces),
-				GFP_KERNEL);
+				GFP_NOIO);
 		if (!new_interfaces) {
 			dev_err(&dev->dev, "Out of memory\n");
 			return -ENOMEM;
@@ -1740,7 +1740,7 @@ int usb_set_configuration(struct usb_device *dev, int configuration)
 		for (; n < nintf; ++n) {
 			new_interfaces[n] = kzalloc(
 					sizeof(struct usb_interface),
-					GFP_KERNEL);
+					GFP_NOIO);
 			if (!new_interfaces[n]) {
 				dev_err(&dev->dev, "Out of memory\n");
 				ret = -ENOMEM;

drivers/usb/core/sysfs.c

@@ -115,6 +115,12 @@ show_speed(struct device *dev, struct device_attribute *attr, char *buf)
 	case USB_SPEED_HIGH:
 		speed = "480";
 		break;
+	case USB_SPEED_VARIABLE:
+		speed = "480";
+		break;
+	case USB_SPEED_SUPER:
+		speed = "5000";
+		break;
 	default:
 		speed = "unknown";
 	}

drivers/usb/host/ehci-hcd.c

@@ -787,9 +787,10 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd)
 
 			/* start 20 msec resume signaling from this port,
 			 * and make khubd collect PORT_STAT_C_SUSPEND to
-			 * stop that signaling.
+			 * stop that signaling.  Use 5 ms extra for safety,
+			 * like usb_port_resume() does.
 			 */
-			ehci->reset_done [i] = jiffies + msecs_to_jiffies (20);
+			ehci->reset_done[i] = jiffies + msecs_to_jiffies(25);
 			ehci_dbg (ehci, "port %d remote wakeup\n", i + 1);
 			mod_timer(&hcd->rh_timer, ehci->reset_done[i]);
 		}

drivers/usb/host/ehci-hub.c

@@ -120,9 +120,26 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
 	del_timer_sync(&ehci->watchdog);
 	del_timer_sync(&ehci->iaa_watchdog);
 
-	port = HCS_N_PORTS (ehci->hcs_params);
 	spin_lock_irq (&ehci->lock);
 
+	/* Once the controller is stopped, port resumes that are already
+	 * in progress won't complete.  Hence if remote wakeup is enabled
+	 * for the root hub and any ports are in the middle of a resume or
+	 * remote wakeup, we must fail the suspend.
+	 */
+	if (hcd->self.root_hub->do_remote_wakeup) {
+		port = HCS_N_PORTS(ehci->hcs_params);
+		while (port--) {
+			if (ehci->reset_done[port] != 0) {
+				spin_unlock_irq(&ehci->lock);
+				ehci_dbg(ehci, "suspend failed because "
+						"port %d is resuming\n",
+						port + 1);
+				return -EBUSY;
+			}
+		}
+	}
+
 	/* stop schedules, clean any completed work */
 	if (HC_IS_RUNNING(hcd->state)) {
 		ehci_quiesce (ehci);
@@ -138,6 +155,7 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
 	 */
 	ehci->bus_suspended = 0;
 	ehci->owned_ports = 0;
+	port = HCS_N_PORTS(ehci->hcs_params);
 	while (port--) {
 		u32 __iomem	*reg = &ehci->regs->port_status [port];
 		u32		t1 = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;

drivers/usb/host/ehci-q.c

@@ -849,9 +849,10 @@ qh_make (
 				 * But interval 1 scheduling is simpler, and
 				 * includes high bandwidth.
 				 */
-				dbg ("intr period %d uframes, NYET!",
-						urb->interval);
-				goto done;
+				urb->interval = 1;
+			} else if (qh->period > ehci->periodic_size) {
+				qh->period = ehci->periodic_size;
+				urb->interval = qh->period << 3;
 			}
 		} else {
 			int		think_time;
@@ -874,6 +875,10 @@ qh_make (
 					usb_calc_bus_time (urb->dev->speed,
 					is_input, 0, max_packet (maxp)));
 			qh->period = urb->interval;
+			if (qh->period > ehci->periodic_size) {
+				qh->period = ehci->periodic_size;
+				urb->interval = qh->period;
+			}
 		}
 	}
 

drivers/usb/host/fhci-hcd.c

@@ -242,9 +242,10 @@ err:
 static void fhci_usb_free(void *lld)
 {
 	struct fhci_usb *usb = lld;
-	struct fhci_hcd *fhci = usb->fhci;
+	struct fhci_hcd *fhci;
 
 	if (usb) {
+		fhci = usb->fhci;
 		fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF);
 		fhci_ep0_free(usb);
 		kfree(usb->actual_frame);

drivers/usb/host/isp1362-hcd.c

@@ -2270,10 +2270,10 @@ static int isp1362_mem_config(struct usb_hcd *hcd)
 	dev_info(hcd->self.controller, "ISP1362 Memory usage:\n");
 	dev_info(hcd->self.controller, "  ISTL:    2 * %4d:     %4d @ $%04x:$%04x\n",
 		 istl_size / 2, istl_size, 0, istl_size / 2);
-	dev_info(hcd->self.controller, "  INTL: %4d * (%3lu+8):  %4d @ $%04x\n",
+	dev_info(hcd->self.controller, "  INTL: %4d * (%3zu+8):  %4d @ $%04x\n",
 		 ISP1362_INTL_BUFFERS, intl_blksize - PTD_HEADER_SIZE,
 		 intl_size, istl_size);
-	dev_info(hcd->self.controller, "  ATL : %4d * (%3lu+8):  %4d @ $%04x\n",
+	dev_info(hcd->self.controller, "  ATL : %4d * (%3zu+8):  %4d @ $%04x\n",
 		 atl_buffers, atl_blksize - PTD_HEADER_SIZE,
 		 atl_size, istl_size + intl_size);
 	dev_info(hcd->self.controller, "  USED/FREE:   %4d      %4d\n", total,
@@ -2697,6 +2697,8 @@ static int __init isp1362_probe(struct platform_device *pdev)
 	void __iomem *data_reg;
 	int irq;
 	int retval = 0;
+	struct resource *irq_res;
+	unsigned int irq_flags = 0;
 
 	/* basic sanity checks first.  board-specific init logic should
 	 * have initialized this the three resources and probably board
@@ -2710,11 +2712,12 @@ static int __init isp1362_probe(struct platform_device *pdev)
 
 	data = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	addr = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	irq = platform_get_irq(pdev, 0);
-	if (!addr || !data || irq < 0) {
+	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!addr || !data || !irq_res) {
 		retval = -ENODEV;
 		goto err1;
 	}
+	irq = irq_res->start;
 
 #ifdef CONFIG_USB_HCD_DMA
 	if (pdev->dev.dma_mask) {
@@ -2781,12 +2784,16 @@ static int __init isp1362_probe(struct platform_device *pdev)
 	}
 #endif
 
-#ifdef CONFIG_ARM
-	if (isp1362_hcd->board)
-		set_irq_type(irq, isp1362_hcd->board->int_act_high ? IRQT_RISING : IRQT_FALLING);
-#endif
+	if (irq_res->flags & IORESOURCE_IRQ_HIGHEDGE)
+		irq_flags |= IRQF_TRIGGER_RISING;
+	if (irq_res->flags & IORESOURCE_IRQ_LOWEDGE)
+		irq_flags |= IRQF_TRIGGER_FALLING;
+	if (irq_res->flags & IORESOURCE_IRQ_HIGHLEVEL)
+		irq_flags |= IRQF_TRIGGER_HIGH;
+	if (irq_res->flags & IORESOURCE_IRQ_LOWLEVEL)
+		irq_flags |= IRQF_TRIGGER_LOW;
 
-	retval = usb_add_hcd(hcd, irq, IRQF_TRIGGER_LOW | IRQF_DISABLED | IRQF_SHARED);
+	retval = usb_add_hcd(hcd, irq, irq_flags | IRQF_DISABLED | IRQF_SHARED);
 	if (retval != 0)
 		goto err6;
 	pr_info("%s, irq %d\n", hcd->product_desc, irq);

drivers/usb/host/isp1760-hcd.c

@@ -1039,12 +1039,12 @@ static void do_atl_int(struct usb_hcd *usb_hcd)
 		if (!nakcount && (dw3 & DW3_QTD_ACTIVE)) {
 			u32 buffstatus;
 
-			/* XXX
+			/*
 			 * NAKs are handled in HW by the chip. Usually if the
 			 * device is not able to send data fast enough.
-			 * This did not trigger for a long time now.
+			 * This happens mostly on slower hardware.
 			 */
-			printk(KERN_ERR "Reloading ptd %p/%p... qh %p readed: "
+			printk(KERN_NOTICE "Reloading ptd %p/%p... qh %p read: "
 					"%d of %zu done: %08x cur: %08x\n", qtd,
 					urb, qh, PTD_XFERRED_LENGTH(dw3),
 					qtd->length, done_map,

drivers/usb/host/uhci-hcd.c

@@ -749,7 +749,20 @@ static int uhci_rh_suspend(struct usb_hcd *hcd)
 	spin_lock_irq(&uhci->lock);
 	if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))
 		rc = -ESHUTDOWN;
-	else if (!uhci->dead)
+	else if (uhci->dead)
+		;		/* Dead controllers tell no tales */
+
+	/* Once the controller is stopped, port resumes that are already
+	 * in progress won't complete.  Hence if remote wakeup is enabled
+	 * for the root hub and any ports are in the middle of a resume or
+	 * remote wakeup, we must fail the suspend.
+	 */
+	else if (hcd->self.root_hub->do_remote_wakeup &&
+			uhci->resuming_ports) {
+		dev_dbg(uhci_dev(uhci), "suspend failed because a port "
+				"is resuming\n");
+		rc = -EBUSY;
+	} else
 		suspend_rh(uhci, UHCI_RH_SUSPENDED);
 	spin_unlock_irq(&uhci->lock);
 	return rc;

drivers/usb/host/uhci-hub.c

@@ -167,7 +167,7 @@ static void uhci_check_ports(struct uhci_hcd *uhci)
 				/* Port received a wakeup request */
 				set_bit(port, &uhci->resuming_ports);
 				uhci->ports_timeout = jiffies +
-						msecs_to_jiffies(20);
+						msecs_to_jiffies(25);
 
 				/* Make sure we see the port again
 				 * after the resuming period is over. */

drivers/usb/serial/generic.c

@@ -386,12 +386,12 @@ int usb_serial_generic_chars_in_buffer(struct tty_struct *tty)
 
 	dbg("%s - port %d", __func__, port->number);
 
-	if (serial->type->max_in_flight_urbs) {
-		spin_lock_irqsave(&port->lock, flags);
+	spin_lock_irqsave(&port->lock, flags);
+	if (serial->type->max_in_flight_urbs)
 		chars = port->tx_bytes_flight;
-		spin_unlock_irqrestore(&port->lock, flags);
-	} else if (serial->num_bulk_out)
+	else if (serial->num_bulk_out)
 		chars = kfifo_len(&port->write_fifo);
+	spin_unlock_irqrestore(&port->lock, flags);
 
 	dbg("%s - returns %d", __func__, chars);
 	return chars;
@@ -489,6 +489,8 @@ void usb_serial_generic_write_bulk_callback(struct urb *urb)
 	dbg("%s - port %d", __func__, port->number);
 
 	if (port->serial->type->max_in_flight_urbs) {
+		kfree(urb->transfer_buffer);
+
 		spin_lock_irqsave(&port->lock, flags);
 		--port->urbs_in_flight;
 		port->tx_bytes_flight -= urb->transfer_buffer_length;

drivers/usb/storage/unusual_devs.h

@@ -1807,13 +1807,6 @@ UNUSUAL_DEV(  0x2735, 0x100b, 0x0000, 0x9999,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_GO_SLOW ),
 
-/* Reported by Rohan Hart <rohan.hart17@gmail.com> */
-UNUSUAL_DEV(  0x2770, 0x915d, 0x0010, 0x0010,
-		"INTOVA",
-		"Pixtreme",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
-		US_FL_FIX_CAPACITY ),
-
 /* Reported by Frederic Marchal <frederic.marchal@wowcompany.com>
  * Mio Moov 330
  */

drivers/usb/storage/usb.c

@@ -434,7 +434,8 @@ static void adjust_quirks(struct us_data *us)
 	u16 vid = le16_to_cpu(us->pusb_dev->descriptor.idVendor);
 	u16 pid = le16_to_cpu(us->pusb_dev->descriptor.idProduct);
 	unsigned f = 0;
-	unsigned int mask = (US_FL_SANE_SENSE | US_FL_FIX_CAPACITY |
+	unsigned int mask = (US_FL_SANE_SENSE | US_FL_BAD_SENSE |
+			US_FL_FIX_CAPACITY |
 			US_FL_CAPACITY_HEURISTICS | US_FL_IGNORE_DEVICE |
 			US_FL_NOT_LOCKABLE | US_FL_MAX_SECTORS_64 |
 			US_FL_CAPACITY_OK | US_FL_IGNORE_RESIDUE |

include/linux/usb.h

@@ -192,6 +192,7 @@ struct usb_interface {
 	unsigned needs_altsetting0:1;	/* switch to altsetting 0 is pending */
 	unsigned needs_binding:1;	/* needs delayed unbind/rebind */
 	unsigned reset_running:1;
+	unsigned resetting_device:1;	/* true: bandwidth alloc after reset */
 
 	struct device dev;		/* interface specific device info */
 	struct device *usb_dev;