Merge tag 'davinci-for-v3.10/dt-2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dt2

From Sekhar Nori:
v3.10 DT updates for DaVinci

This set of patches adds support for PWMs and SPI
controller present on DA850 and for SPI flash present on
DA850 EVM.

* tag 'davinci-for-v3.10/dt-2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: davinci: da850-evm: add SPI flash support
  ARM: davinci: da850: override SPI DT node device name
  ARM: davinci: da850: add SPI1 DT node
  spi/davinci: add DT binding documentation
  spi/davinci: no wildcards in DT compatible property
  ARM: davinci: da850: add EHRPWM & ECAP DT node
  ARM: davinci: da850: override mmc DT node device name
  ARM: davinci: da850: add mmc DT entries
  mmc: davinci_mmc: add DT support
  ARM: davinci: da850: add tps6507x regulator DT data
  ARM: regulator: add tps6507x device tree data
  ARM: davinci: remove test for undefined Kconfig macro
  ARM: davinci: mmc: derive version information from device name
  ARM: davinci: da850: add ECAP & EHRPWM clock nodes
  ARM: davinci: clk framework support for enable/disable functionality

Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/mmc/davinci_mmc.txt

@@ -0,0 +1,33 @@
+* TI Highspeed MMC host controller for DaVinci
+
+The Highspeed MMC Host Controller on TI DaVinci family
+provides an interface for MMC, SD and SDIO types of memory cards.
+
+This file documents the properties used by the davinci_mmc driver.
+
+Required properties:
+- compatible:
+ Should be "ti,da830-mmc": for da830, da850, dm365
+ Should be "ti,dm355-mmc": for dm355, dm644x
+
+Optional properties:
+- bus-width: Number of data lines, can be <1>, <4>, or <8>, default <1>
+- max-frequency: Maximum operating clock frequency, default 25MHz.
+- dmas: List of DMA specifiers with the controller specific format
+	as described in the generic DMA client binding. A tx and rx
+	specifier is required.
+- dma-names: RX and TX  DMA request names. These strings correspond
+	1:1 with the DMA specifiers listed in dmas.
+
+Example:
+mmc0: mmc@1c40000 {
+	compatible = "ti,da830-mmc",
+	reg = <0x40000 0x1000>;
+	interrupts = <16>;
+	status = "okay";
+	bus-width = <4>;
+	max-frequency = <50000000>;
+	dmas = <&edma 16
+		&edma 17>;
+	dma-names = "rx", "tx";
+};

Documentation/devicetree/bindings/spi/spi-davinci.txt

@@ -0,0 +1,51 @@
+Davinci SPI controller device bindings
+
+Required properties:
+- #address-cells: number of cells required to define a chip select
+	address on the SPI bus. Should be set to 1.
+- #size-cells: should be zero.
+- compatible:
+	- "ti,dm6441-spi" for SPI used similar to that on DM644x SoC family
+	- "ti,da830-spi" for SPI used similar to that on DA8xx SoC family
+- reg: Offset and length of SPI controller register space
+- num-cs: Number of chip selects
+- ti,davinci-spi-intr-line: interrupt line used to connect the SPI
+	IP to the interrupt controller within the SoC. Possible values
+	are 0 and 1. Manual says one of the two possible interrupt
+	lines can be tied to the interrupt controller. Set this
+	based on a specifc SoC configuration.
+- interrupts: interrupt number mapped to CPU.
+- clocks: spi clk phandle
+
+Example of a NOR flash slave device (n25q032) connected to DaVinci
+SPI controller device over the SPI bus.
+
+spi0:spi@20BF0000 {
+	#address-cells			= <1>;
+	#size-cells			= <0>;
+	compatible			= "ti,dm6446-spi";
+	reg				= <0x20BF0000 0x1000>;
+	num-cs				= <4>;
+	ti,davinci-spi-intr-line	= <0>;
+	interrupts			= <338>;
+	clocks				= <&clkspi>;
+
+	flash: n25q032@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p32";
+		spi-max-frequency = <25000000>;
+		reg = <0>;
+
+		partition@0 {
+			label = "u-boot-spl";
+			reg = <0x0 0x80000>;
+			read-only;
+		};
+
+		partition@1 {
+			label = "test";
+			reg = <0x80000 0x380000>;
+		};
+	};
+};

arch/arm/boot/dts/da850-evm.dts

@@ -35,14 +35,124 @@
 			clock-frequency = <100000>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&i2c0_pins>;
+
+			tps: tps@48 {
+				reg = <0x48>;
+			};
 		};
 		wdt: wdt@1c21000 {
 			status = "okay";
 		};
+		mmc0: mmc@1c40000 {
+			max-frequency = <50000000>;
+			bus-width = <4>;
+			status = "okay";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+		};
+		spi1: spi@1f0e000 {
+			status = "okay";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_pins &spi1_cs0_pin>;
+			flash: m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "m25p64";
+				spi-max-frequency = <30000000>;
+				reg = <0>;
+				partition@0 {
+					label = "U-Boot-SPL";
+					reg = <0x00000000 0x00010000>;
+					read-only;
+				};
+				partition@1 {
+					label = "U-Boot";
+					reg = <0x00010000 0x00080000>;
+					read-only;
+				};
+				partition@2 {
+					label = "U-Boot-Env";
+					reg = <0x00090000 0x00010000>;
+					read-only;
+				};
+				partition@3 {
+					label = "Kernel";
+					reg = <0x000a0000 0x00280000>;
+				};
+				partition@4 {
+					label = "Filesystem";
+					reg = <0x00320000 0x00400000>;
+				};
+				partition@5 {
+					label = "MAC-Address";
+					reg = <0x007f0000 0x00010000>;
+					read-only;
+				};
+			};
+		};
 	};
 	nand_cs3@62000000 {
 		status = "okay";
 		pinctrl-names = "default";
 		pinctrl-0 = <&nand_cs3_pins>;
 	};
+	vbat: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+};
+
+/include/ "tps6507x.dtsi"
+
+&tps {
+	vdcdc1_2-supply = <&vbat>;
+	vdcdc3-supply = <&vbat>;
+	vldo1_2-supply = <&vbat>;
+
+	regulators {
+		vdcdc1_reg: regulator@0 {
+			regulator-name = "VDCDC1_3.3V";
+			regulator-min-microvolt = <3150000>;
+			regulator-max-microvolt = <3450000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		vdcdc2_reg: regulator@1 {
+			regulator-name = "VDCDC2_3.3V";
+			regulator-min-microvolt = <1710000>;
+			regulator-max-microvolt = <3450000>;
+			regulator-always-on;
+			regulator-boot-on;
+			ti,defdcdc_default = <1>;
+		};
+
+		vdcdc3_reg: regulator@2 {
+			regulator-name = "VDCDC3_1.2V";
+			regulator-min-microvolt = <950000>;
+			regulator-max-microvolt = <1350000>;
+			regulator-always-on;
+			regulator-boot-on;
+			ti,defdcdc_default = <1>;
+		};
+
+		ldo1_reg: regulator@3 {
+			regulator-name = "LDO1_1.8V";
+			regulator-min-microvolt = <1710000>;
+			regulator-max-microvolt = <1890000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		ldo2_reg: regulator@4 {
+			regulator-name = "LDO2_1.2V";
+			regulator-min-microvolt = <1140000>;
+			regulator-max-microvolt = <1320000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+	};
 };

arch/arm/boot/dts/da850.dtsi

@@ -62,6 +62,69 @@
 					0x10 0x00002200 0x0000ff00
 				>;
 			};
+			mmc0_pins: pinmux_mmc_pins {
+				pinctrl-single,bits = <
+					/* MMCSD0_DAT[3] MMCSD0_DAT[2]
+					 * MMCSD0_DAT[1] MMCSD0_DAT[0]
+					 * MMCSD0_CMD    MMCSD0_CLK
+					 */
+					0x28 0x00222222  0x00ffffff
+				>;
+			};
+			ehrpwm0a_pins: pinmux_ehrpwm0a_pins {
+				pinctrl-single,bits = <
+					/* EPWM0A */
+					0xc 0x00000002 0x0000000f
+				>;
+			};
+			ehrpwm0b_pins: pinmux_ehrpwm0b_pins {
+				pinctrl-single,bits = <
+					/* EPWM0B */
+					0xc 0x00000020 0x000000f0
+				>;
+			};
+			ehrpwm1a_pins: pinmux_ehrpwm1a_pins {
+				pinctrl-single,bits = <
+					/* EPWM1A */
+					0x14 0x00000002 0x0000000f
+				>;
+			};
+			ehrpwm1b_pins: pinmux_ehrpwm1b_pins {
+				pinctrl-single,bits = <
+					/* EPWM1B */
+					0x14 0x00000020 0x000000f0
+				>;
+			};
+			ecap0_pins: pinmux_ecap0_pins {
+				pinctrl-single,bits = <
+					/* ECAP0_APWM0 */
+					0x8 0x20000000 0xf0000000
+				>;
+			};
+			ecap1_pins: pinmux_ecap1_pins {
+				pinctrl-single,bits = <
+					/* ECAP1_APWM1 */
+					0x4 0x40000000 0xf0000000
+				>;
+			};
+			ecap2_pins: pinmux_ecap2_pins {
+				pinctrl-single,bits = <
+					/* ECAP2_APWM2 */
+					0x4 0x00000004 0x0000000f
+				>;
+			};
+			spi1_pins: pinmux_spi_pins {
+				pinctrl-single,bits = <
+					/* SIMO, SOMI, CLK */
+					0x14 0x00110100 0x00ff0f00
+				>;
+			};
+			spi1_cs0_pin: pinmux_spi1_cs0 {
+				pinctrl-single,bits = <
+					/* CS0 */
+					0x14 0x00000010 0x000000f0
+				>;
+			};
 		};
 		serial0: serial@1c42000 {
 			compatible = "ns16550a";
@@ -107,6 +170,52 @@
 			reg = <0x21000 0x1000>;
 			status = "disabled";
 		};
+		mmc0: mmc@1c40000 {
+			compatible = "ti,da830-mmc";
+			reg = <0x40000 0x1000>;
+			interrupts = <16>;
+			status = "disabled";
+		};
+		ehrpwm0: ehrpwm@01f00000 {
+			compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
+			#pwm-cells = <3>;
+			reg = <0x300000 0x2000>;
+			status = "disabled";
+		};
+		ehrpwm1: ehrpwm@01f02000 {
+			compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
+			#pwm-cells = <3>;
+			reg = <0x302000 0x2000>;
+			status = "disabled";
+		};
+		ecap0: ecap@01f06000 {
+			compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+			#pwm-cells = <3>;
+			reg = <0x306000 0x80>;
+			status = "disabled";
+		};
+		ecap1: ecap@01f07000 {
+			compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+			#pwm-cells = <3>;
+			reg = <0x307000 0x80>;
+			status = "disabled";
+		};
+		ecap2: ecap@01f08000 {
+			compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+			#pwm-cells = <3>;
+			reg = <0x308000 0x80>;
+			status = "disabled";
+		};
+		spi1: spi@1f0e000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "ti,da830-spi";
+			reg = <0x30e000 0x1000>;
+			num-cs = <4>;
+			ti,davinci-spi-intr-line = <1>;
+			interrupts = <56>;
+			status = "disabled";
+		};
 	};
 	nand_cs3@62000000 {
 		compatible = "ti,davinci-nand";

arch/arm/boot/dts/tps6507x.dtsi

@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Integrated Power Management Chip
+ * http://www.ti.com/lit/ds/symlink/tps65070.pdf
+ */
+
+&tps {
+	compatible = "ti,tps6507x";
+
+	regulators {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdcdc1_reg: regulator@0 {
+			reg = <0>;
+			regulator-compatible = "VDCDC1";
+		};
+
+		vdcdc2_reg: regulator@1 {
+			reg = <1>;
+			regulator-compatible = "VDCDC2";
+		};
+
+		vdcdc3_reg: regulator@2 {
+			reg = <2>;
+			regulator-compatible = "VDCDC3";
+		};
+
+		ldo1_reg: regulator@3 {
+			reg = <3>;
+			regulator-compatible = "LDO1";
+		};
+
+		ldo2_reg: regulator@4 {
+			reg = <4>;
+			regulator-compatible = "LDO2";
+		};
+
+	};
+};

arch/arm/mach-davinci/board-da830-evm.c

@@ -246,7 +246,6 @@ static struct davinci_mmc_config da830_evm_mmc_config = {
 	.wires			= 8,
 	.max_freq		= 50000000,
 	.caps			= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-	.version		= MMC_CTLR_VERSION_2,
 };
 
 static inline void da830_evm_init_mmc(void)

arch/arm/mach-davinci/board-da850-evm.c

@@ -802,7 +802,6 @@ static struct davinci_mmc_config da850_mmc_config = {
 	.wires		= 4,
 	.max_freq	= 50000000,
 	.caps		= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-	.version	= MMC_CTLR_VERSION_2,
 };
 
 static const short da850_evm_mmcsd0_pins[] __initconst = {
@@ -1372,7 +1371,6 @@ static struct davinci_mmc_config da850_wl12xx_mmc_config = {
 	.max_freq	= 25000000,
 	.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_NONREMOVABLE |
 			  MMC_CAP_POWER_OFF_CARD,
-	.version	= MMC_CTLR_VERSION_2,
 };
 
 static const short da850_wl12xx_pins[] __initconst = {

arch/arm/mach-davinci/board-dm355-evm.c

@@ -280,7 +280,6 @@ static struct davinci_mmc_config dm355evm_mmc_config = {
 	.wires		= 4,
 	.max_freq       = 50000000,
 	.caps           = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-	.version	= MMC_CTLR_VERSION_1,
 };
 
 /* Don't connect anything to J10 unless you're only using USB host

arch/arm/mach-davinci/board-dm365-evm.c

@@ -253,7 +253,6 @@ static struct davinci_mmc_config dm365evm_mmc_config = {
 	.wires		= 4,
 	.max_freq	= 50000000,
 	.caps		= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-	.version	= MMC_CTLR_VERSION_2,
 };
 
 static void dm365evm_emac_configure(void)

arch/arm/mach-davinci/board-dm644x-evm.c

@@ -570,7 +570,6 @@ static struct davinci_mmc_config dm6446evm_mmc_config = {
 	.get_cd		= dm6444evm_mmc_get_cd,
 	.get_ro		= dm6444evm_mmc_get_ro,
 	.wires		= 4,
-	.version	= MMC_CTLR_VERSION_1
 };
 
 static struct i2c_board_info __initdata i2c_info[] =  {

arch/arm/mach-davinci/board-neuros-osd2.c

@@ -164,7 +164,6 @@ static void __init davinci_ntosd2_map_io(void)
 
 static struct davinci_mmc_config davinci_ntosd2_mmc_config = {
 	.wires		= 4,
-	.version	= MMC_CTLR_VERSION_1
 };
 
 

arch/arm/mach-davinci/board-omapl138-hawk.c

@@ -136,7 +136,6 @@ static struct davinci_mmc_config da850_mmc_config = {
 	.wires		= 4,
 	.max_freq	= 50000000,
 	.caps		= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-	.version	= MMC_CTLR_VERSION_2,
 };
 
 static __init void omapl138_hawk_mmc_init(void)

arch/arm/mach-davinci/board-tnetv107x-evm.c

@@ -85,7 +85,6 @@ static struct davinci_mmc_config mmc_config = {
 	.wires		= 4,
 	.max_freq	= 50000000,
 	.caps		= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-	.version	= MMC_CTLR_VERSION_1,
 };
 
 static const short sdio1_pins[] __initconst = {

arch/arm/mach-davinci/clock.c

@@ -35,19 +35,26 @@ static void __clk_enable(struct clk *clk)
 {
 	if (clk->parent)
 		__clk_enable(clk->parent);
-	if (clk->usecount++ == 0 && (clk->flags & CLK_PSC))
-		davinci_psc_config(clk->domain, clk->gpsc, clk->lpsc,
-				true, clk->flags);
+	if (clk->usecount++ == 0) {
+		if (clk->flags & CLK_PSC)
+			davinci_psc_config(clk->domain, clk->gpsc, clk->lpsc,
+					   true, clk->flags);
+		else if (clk->clk_enable)
+			clk->clk_enable(clk);
+	}
 }
 
 static void __clk_disable(struct clk *clk)
 {
 	if (WARN_ON(clk->usecount == 0))
 		return;
-	if (--clk->usecount == 0 && !(clk->flags & CLK_PLL) &&
-	    (clk->flags & CLK_PSC))
-		davinci_psc_config(clk->domain, clk->gpsc, clk->lpsc,
-				false, clk->flags);
+	if (--clk->usecount == 0) {
+		if (!(clk->flags & CLK_PLL) && (clk->flags & CLK_PSC))
+			davinci_psc_config(clk->domain, clk->gpsc, clk->lpsc,
+					   false, clk->flags);
+		else if (clk->clk_disable)
+			clk->clk_disable(clk);
+	}
 	if (clk->parent)
 		__clk_disable(clk->parent);
 }

arch/arm/mach-davinci/clock.h

@@ -104,6 +104,8 @@ struct clk {
 	int (*set_rate) (struct clk *clk, unsigned long rate);
 	int (*round_rate) (struct clk *clk, unsigned long rate);
 	int (*reset) (struct clk *clk, bool reset);
+	void (*clk_enable) (struct clk *clk);
+	void (*clk_disable) (struct clk *clk);
 };
 
 /* Clock flags: SoC-specific flags start at BIT(16) */

arch/arm/mach-davinci/da830.c

@@ -394,7 +394,7 @@ static struct clk_lookup da830_clks[] = {
 	CLK(NULL,		"tpcc",		&tpcc_clk),
 	CLK(NULL,		"tptc0",	&tptc0_clk),
 	CLK(NULL,		"tptc1",	&tptc1_clk),
-	CLK("davinci_mmc.0",	NULL,		&mmcsd_clk),
+	CLK("da830-mmc.0",	NULL,		&mmcsd_clk),
 	CLK(NULL,		"uart0",	&uart0_clk),
 	CLK(NULL,		"uart1",	&uart1_clk),
 	CLK(NULL,		"uart2",	&uart2_clk),

arch/arm/mach-davinci/da850.c

@@ -383,6 +383,49 @@ static struct clk dsp_clk = {
 	.flags		= PSC_LRST | PSC_FORCE,
 };
 
+static struct clk ehrpwm_clk = {
+	.name		= "ehrpwm",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_PWM,
+	.gpsc		= 1,
+	.flags		= DA850_CLK_ASYNC3,
+};
+
+#define DA8XX_EHRPWM_TBCLKSYNC	BIT(12)
+
+static void ehrpwm_tblck_enable(struct clk *clk)
+{
+	u32 val;
+
+	val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP1_REG));
+	val |= DA8XX_EHRPWM_TBCLKSYNC;
+	writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP1_REG));
+}
+
+static void ehrpwm_tblck_disable(struct clk *clk)
+{
+	u32 val;
+
+	val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP1_REG));
+	val &= ~DA8XX_EHRPWM_TBCLKSYNC;
+	writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP1_REG));
+}
+
+static struct clk ehrpwm_tbclk = {
+	.name		= "ehrpwm_tbclk",
+	.parent		= &ehrpwm_clk,
+	.clk_enable	= ehrpwm_tblck_enable,
+	.clk_disable	= ehrpwm_tblck_disable,
+};
+
+static struct clk ecap_clk = {
+	.name		= "ecap",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_ECAP,
+	.gpsc		= 1,
+	.flags		= DA850_CLK_ASYNC3,
+};
+
 static struct clk_lookup da850_clks[] = {
 	CLK(NULL,		"ref",		&ref_clk),
 	CLK(NULL,		"pll0",		&pll0_clk),
@@ -420,8 +463,8 @@ static struct clk_lookup da850_clks[] = {
 	CLK("davinci_emac.1",	NULL,		&emac_clk),
 	CLK("davinci-mcasp.0",	NULL,		&mcasp_clk),
 	CLK("da8xx_lcdc.0",	"fck",		&lcdc_clk),
-	CLK("davinci_mmc.0",	NULL,		&mmcsd0_clk),
-	CLK("davinci_mmc.1",	NULL,		&mmcsd1_clk),
+	CLK("da830-mmc.0",	NULL,		&mmcsd0_clk),
+	CLK("da830-mmc.1",	NULL,		&mmcsd1_clk),
 	CLK(NULL,		"aemif",	&aemif_clk),
 	CLK(NULL,		"usb11",	&usb11_clk),
 	CLK(NULL,		"usb20",	&usb20_clk),
@@ -430,6 +473,9 @@ static struct clk_lookup da850_clks[] = {
 	CLK("vpif",		NULL,		&vpif_clk),
 	CLK("ahci",		NULL,		&sata_clk),
 	CLK("davinci-rproc.0",	NULL,		&dsp_clk),
+	CLK("ehrpwm",		"fck",		&ehrpwm_clk),
+	CLK("ehrpwm",		"tbclk",	&ehrpwm_tbclk),
+	CLK("ecap",		"fck",		&ecap_clk),
 	CLK(NULL,		NULL,		NULL),
 };
 

arch/arm/mach-davinci/da8xx-dt.c

@@ -40,6 +40,13 @@ static void __init da8xx_init_irq(void)
 struct of_dev_auxdata da850_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("ti,davinci-i2c", 0x01c22000, "i2c_davinci.1", NULL),
 	OF_DEV_AUXDATA("ti,davinci-wdt", 0x01c21000, "watchdog", NULL),
+	OF_DEV_AUXDATA("ti,da830-mmc", 0x01c40000, "da830-mmc.0", NULL),
+	OF_DEV_AUXDATA("ti,da850-ehrpwm", 0x01f00000, "ehrpwm", NULL),
+	OF_DEV_AUXDATA("ti,da850-ehrpwm", 0x01f02000, "ehrpwm", NULL),
+	OF_DEV_AUXDATA("ti,da850-ecap", 0x01f06000, "ecap", NULL),
+	OF_DEV_AUXDATA("ti,da850-ecap", 0x01f07000, "ecap", NULL),
+	OF_DEV_AUXDATA("ti,da850-ecap", 0x01f08000, "ecap", NULL),
+	OF_DEV_AUXDATA("ti,da830-spi", 0x01f0e000, "spi_davinci.1", NULL),
 	{}
 };
 

arch/arm/mach-davinci/devices-da8xx.c

@@ -664,7 +664,7 @@ static struct resource da8xx_mmcsd0_resources[] = {
 };
 
 static struct platform_device da8xx_mmcsd0_device = {
-	.name		= "davinci_mmc",
+	.name		= "da830-mmc",
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(da8xx_mmcsd0_resources),
 	.resource	= da8xx_mmcsd0_resources,
@@ -701,7 +701,7 @@ static struct resource da850_mmcsd1_resources[] = {
 };
 
 static struct platform_device da850_mmcsd1_device = {
-	.name		= "davinci_mmc",
+	.name		= "da830-mmc",
 	.id		= 1,
 	.num_resources	= ARRAY_SIZE(da850_mmcsd1_resources),
 	.resource	= da850_mmcsd1_resources,

arch/arm/mach-davinci/devices-tnetv107x.c

@@ -218,7 +218,7 @@ static u64 mmc1_dma_mask = DMA_BIT_MASK(32);
 
 static struct platform_device mmc_devices[2] = {
 	{
-		.name		= "davinci_mmc",
+		.name		= "dm6441-mmc",
 		.id		= 0,
 		.dev		= {
 			.dma_mask		= &mmc0_dma_mask,
@@ -228,7 +228,7 @@ static struct platform_device mmc_devices[2] = {
 		.resource	= mmc0_resources
 	},
 	{
-		.name		= "davinci_mmc",
+		.name		= "dm6441-mmc",
 		.id		= 1,
 		.dev		= {
 			.dma_mask		= &mmc1_dma_mask,

arch/arm/mach-davinci/devices.c

@@ -150,7 +150,7 @@ static struct resource mmcsd0_resources[] = {
 };
 
 static struct platform_device davinci_mmcsd0_device = {
-	.name = "davinci_mmc",
+	.name = "dm6441-mmc",
 	.id = 0,
 	.dev = {
 		.dma_mask = &mmcsd0_dma_mask,
@@ -187,7 +187,7 @@ static struct resource mmcsd1_resources[] = {
 };
 
 static struct platform_device davinci_mmcsd1_device = {
-	.name = "davinci_mmc",
+	.name = "dm6441-mmc",
 	.id = 1,
 	.dev = {
 		.dma_mask = &mmcsd1_dma_mask,
@@ -235,6 +235,7 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
 			mmcsd1_resources[0].end = DM365_MMCSD1_BASE +
 							SZ_4K - 1;
 			mmcsd1_resources[2].start = IRQ_DM365_SDIOINT1;
+			davinci_mmcsd1_device.name = "da830-mmc";
 		} else
 			break;
 
@@ -256,6 +257,7 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
 			mmcsd0_resources[0].end = DM365_MMCSD0_BASE +
 							SZ_4K - 1;
 			mmcsd0_resources[2].start = IRQ_DM365_SDIOINT0;
+			davinci_mmcsd0_device.name = "da830-mmc";
 		} else if (cpu_is_davinci_dm644x()) {
 			/* REVISIT: should this be in board-init code? */
 			/* Power-on 3.3V IO cells */

arch/arm/mach-davinci/dm355.c

@@ -361,8 +361,8 @@ static struct clk_lookup dm355_clks[] = {
 	CLK("i2c_davinci.1", NULL, &i2c_clk),
 	CLK("davinci-mcbsp.0", NULL, &asp0_clk),
 	CLK("davinci-mcbsp.1", NULL, &asp1_clk),
-	CLK("davinci_mmc.0", NULL, &mmcsd0_clk),
-	CLK("davinci_mmc.1", NULL, &mmcsd1_clk),
+	CLK("dm6441-mmc.0", NULL, &mmcsd0_clk),
+	CLK("dm6441-mmc.1", NULL, &mmcsd1_clk),
 	CLK("spi_davinci.0", NULL, &spi0_clk),
 	CLK("spi_davinci.1", NULL, &spi1_clk),
 	CLK("spi_davinci.2", NULL, &spi2_clk),

arch/arm/mach-davinci/dm365.c

@@ -454,8 +454,8 @@ static struct clk_lookup dm365_clks[] = {
 	CLK(NULL, "uart0", &uart0_clk),
 	CLK(NULL, "uart1", &uart1_clk),
 	CLK("i2c_davinci.1", NULL, &i2c_clk),
-	CLK("davinci_mmc.0", NULL, &mmcsd0_clk),
-	CLK("davinci_mmc.1", NULL, &mmcsd1_clk),
+	CLK("da830-mmc.0", NULL, &mmcsd0_clk),
+	CLK("da830-mmc.1", NULL, &mmcsd1_clk),
 	CLK("spi_davinci.0", NULL, &spi0_clk),
 	CLK("spi_davinci.1", NULL, &spi1_clk),
 	CLK("spi_davinci.2", NULL, &spi2_clk),

arch/arm/mach-davinci/dm644x.c

@@ -310,7 +310,7 @@ static struct clk_lookup dm644x_clks[] = {
 	CLK("i2c_davinci.1", NULL, &i2c_clk),
 	CLK("palm_bk3710", NULL, &ide_clk),
 	CLK("davinci-mcbsp", NULL, &asp_clk),
-	CLK("davinci_mmc.0", NULL, &mmcsd_clk),
+	CLK("dm6441-mmc.0", NULL, &mmcsd_clk),
 	CLK(NULL, "spi", &spi_clk),
 	CLK(NULL, "gpio", &gpio_clk),
 	CLK(NULL, "usb", &usb_clk),

arch/arm/mach-davinci/include/mach/da8xx.h

@@ -55,6 +55,7 @@ extern unsigned int da850_max_speed;
 #define DA8XX_SYSCFG0_VIRT(x)	(da8xx_syscfg0_base + (x))
 #define DA8XX_JTAG_ID_REG	0x18
 #define DA8XX_CFGCHIP0_REG	0x17c
+#define DA8XX_CFGCHIP1_REG	0x180
 #define DA8XX_CFGCHIP2_REG	0x184
 #define DA8XX_CFGCHIP3_REG	0x188
 

arch/arm/mach-davinci/include/mach/debug-macro.S

@@ -24,8 +24,6 @@
 
 #if defined(CONFIG_DEBUG_DAVINCI_DMx_UART0)
 #define UART_BASE	DAVINCI_UART0_BASE
-#elif defined(CONFIG_DEBUG_DAVINCI_DA8XX_UART0)
-#define UART_BASE	DA8XX_UART0_BASE
 #elif defined(CONFIG_DEBUG_DAVINCI_DA8XX_UART1)
 #define UART_BASE	DA8XX_UART1_BASE
 #elif defined(CONFIG_DEBUG_DAVINCI_DA8XX_UART2)

arch/arm/mach-davinci/tnetv107x.c

@@ -272,7 +272,7 @@ static struct clk_lookup clks[] = {
 	CLK("tnetv107x-keypad.0", NULL,			&clk_keypad),
 	CLK(NULL,		"clk_gpio",		&clk_gpio),
 	CLK(NULL,		"clk_mdio",		&clk_mdio),
-	CLK("davinci_mmc.0",	NULL,			&clk_sdio0),
+	CLK("dm6441-mmc.0",	NULL,			&clk_sdio0),
 	CLK(NULL,		"uart0",		&clk_uart0),
 	CLK(NULL,		"uart1",		&clk_uart1),
 	CLK(NULL,		"timer0",		&clk_timer0),
@@ -292,7 +292,7 @@ static struct clk_lookup clks[] = {
 	CLK(NULL,		"clk_system",		&clk_system),
 	CLK(NULL,		"clk_imcop",		&clk_imcop),
 	CLK(NULL,		"clk_spare",		&clk_spare),
-	CLK("davinci_mmc.1",	NULL,			&clk_sdio1),
+	CLK("dm6441-mmc.1",	NULL,			&clk_sdio1),
 	CLK(NULL,		"clk_ddr2_vrst",	&clk_ddr2_vrst),
 	CLK(NULL,		"clk_ddr2_vctl_rst",	&clk_ddr2_vctl_rst),
 	CLK(NULL,		NULL,			NULL),

drivers/mmc/host/davinci_mmc.c

@@ -34,6 +34,8 @@
 #include <linux/dma-mapping.h>
 #include <linux/edma.h>
 #include <linux/mmc/mmc.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 
 #include <linux/platform_data/mmc-davinci.h>
 
@@ -522,14 +524,16 @@ static int __init davinci_acquire_dma_channels(struct mmc_davinci_host *host)
 	dma_cap_set(DMA_SLAVE, mask);
 
 	host->dma_tx =
-		dma_request_channel(mask, edma_filter_fn, &host->txdma);
+		dma_request_slave_channel_compat(mask, edma_filter_fn,
+				&host->txdma, mmc_dev(host->mmc), "tx");
 	if (!host->dma_tx) {
 		dev_err(mmc_dev(host->mmc), "Can't get dma_tx channel\n");
 		return -ENODEV;
 	}
 
 	host->dma_rx =
-		dma_request_channel(mask, edma_filter_fn, &host->rxdma);
+		dma_request_slave_channel_compat(mask, edma_filter_fn,
+				&host->rxdma, mmc_dev(host->mmc), "rx");
 	if (!host->dma_rx) {
 		dev_err(mmc_dev(host->mmc), "Can't get dma_rx channel\n");
 		r = -ENODEV;
@@ -1157,16 +1161,86 @@ static void __init init_mmcsd_host(struct mmc_davinci_host *host)
 	mmc_davinci_reset_ctrl(host, 0);
 }
 
-static int __init davinci_mmcsd_probe(struct platform_device *pdev)
+static struct platform_device_id davinci_mmc_devtype[] = {
+	{
+		.name	= "dm6441-mmc",
+		.driver_data = MMC_CTLR_VERSION_1,
+	}, {
+		.name	= "da830-mmc",
+		.driver_data = MMC_CTLR_VERSION_2,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(platform, davinci_mmc_devtype);
+
+static const struct of_device_id davinci_mmc_dt_ids[] = {
+	{
+		.compatible = "ti,dm6441-mmc",
+		.data = &davinci_mmc_devtype[MMC_CTLR_VERSION_1],
+	},
+	{
+		.compatible = "ti,da830-mmc",
+		.data = &davinci_mmc_devtype[MMC_CTLR_VERSION_2],
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, davinci_mmc_dt_ids);
+
+static struct davinci_mmc_config
+	*mmc_parse_pdata(struct platform_device *pdev)
 {
+	struct device_node *np;
 	struct davinci_mmc_config *pdata = pdev->dev.platform_data;
+	const struct of_device_id *match =
+		of_match_device(of_match_ptr(davinci_mmc_dt_ids), &pdev->dev);
+	u32 data;
+
+	np = pdev->dev.of_node;
+	if (!np)
+		return pdata;
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata) {
+		dev_err(&pdev->dev, "Failed to allocate memory for struct davinci_mmc_config\n");
+		goto nodata;
+	}
+
+	if (match)
+		pdev->id_entry = match->data;
+
+	if (of_property_read_u32(np, "max-frequency", &pdata->max_freq))
+		dev_info(&pdev->dev, "'max-frequency' property not specified, defaulting to 25MHz\n");
+
+	of_property_read_u32(np, "bus-width", &data);
+	switch (data) {
+	case 1:
+	case 4:
+	case 8:
+		pdata->wires = data;
+		break;
+	default:
+		pdata->wires = 1;
+		dev_info(&pdev->dev, "Unsupported buswidth, defaulting to 1 bit\n");
+	}
+nodata:
+	return pdata;
+}
+
+static int __init davinci_mmcsd_probe(struct platform_device *pdev)
+{
+	struct davinci_mmc_config *pdata = NULL;
 	struct mmc_davinci_host *host = NULL;
 	struct mmc_host *mmc = NULL;
 	struct resource *r, *mem = NULL;
 	int ret = 0, irq = 0;
 	size_t mem_size;
+	const struct platform_device_id *id_entry;
 
-	/* REVISIT:  when we're fully converted, fail if pdata is NULL */
+	pdata = mmc_parse_pdata(pdev);
+	if (pdata == NULL) {
+		dev_err(&pdev->dev, "Couldn't get platform data\n");
+		return -ENOENT;
+	}
 
 	ret = -ENODEV;
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -1237,7 +1311,9 @@ static int __init davinci_mmcsd_probe(struct platform_device *pdev)
 	if (pdata && (pdata->wires == 8))
 		mmc->caps |= (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA);
 
-	host->version = pdata->version;
+	id_entry = platform_get_device_id(pdev);
+	if (id_entry)
+		host->version = id_entry->driver_data;
 
 	mmc->ops = &mmc_davinci_ops;
 	mmc->f_min = 312500;
@@ -1406,8 +1482,10 @@ static struct platform_driver davinci_mmcsd_driver = {
 		.name	= "davinci_mmc",
 		.owner	= THIS_MODULE,
 		.pm	= davinci_mmcsd_pm_ops,
+		.of_match_table = of_match_ptr(davinci_mmc_dt_ids),
 	},
 	.remove		= __exit_p(davinci_mmcsd_remove),
+	.id_table	= davinci_mmc_devtype,
 };
 
 static int __init davinci_mmcsd_init(void)

drivers/spi/spi-davinci.c

@@ -776,10 +776,10 @@ rx_dma_failed:
 #if defined(CONFIG_OF)
 static const struct of_device_id davinci_spi_of_match[] = {
 	{
-		.compatible = "ti,dm644x-spi",
+		.compatible = "ti,dm6441-spi",
 	},
 	{
-		.compatible = "ti,da8xx-spi",
+		.compatible = "ti,da830-spi",
 		.data = (void *)SPI_VERSION_2,
 	},
 	{ },

include/linux/platform_data/mmc-davinci.h

@@ -23,9 +23,6 @@ struct davinci_mmc_config {
 	/* any additional host capabilities: OR'd in to mmc->f_caps */
 	u32     caps;
 
-	/* Version of the MMC/SD controller */
-	u8	version;
-
 	/* Number of sg segments */
 	u8	nr_sg;
 };