MIPS: Enable GENERIC_HARDIRQS_NO__DO_IRQ for all platforms

__do_IRQ() is deprecated and will go away.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/Kconfig

@@ -77,7 +77,6 @@ config MIPS_COBALT
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select GENERIC_HARDIRQS_NO__DO_IRQ
 
 config MACH_DECSTATION
 	bool "DECstations"
@@ -132,7 +131,6 @@ config MACH_JAZZ
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
 	select SYS_SUPPORTS_100HZ
-	select GENERIC_HARDIRQS_NO__DO_IRQ
 	help
 	 This a family of machines based on the MIPS R4030 chipset which was
 	 used by several vendors to build RISC/os and Windows NT workstations.
@@ -154,7 +152,6 @@ config LASAT
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL if BROKEN
 	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select GENERIC_HARDIRQS_NO__DO_IRQ
 
 config LEMOTE_FULONG
 	bool "Lemote Fulong mini-PC"
@@ -175,7 +172,6 @@ config LEMOTE_FULONG
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_SUPPORTS_HIGHMEM
 	select SYS_HAS_EARLY_PRINTK
-	select GENERIC_HARDIRQS_NO__DO_IRQ
 	select GENERIC_ISA_DMA_SUPPORT_BROKEN
 	select CPU_HAS_WB
 	help
@@ -250,7 +246,6 @@ config MACH_VR41XX
 	select CEVT_R4K
 	select CSRC_R4K
 	select SYS_HAS_CPU_VR41XX
-	select GENERIC_HARDIRQS_NO__DO_IRQ
 
 config NXP_STB220
 	bool "NXP STB220 board"
@@ -364,7 +359,6 @@ config SGI_IP27
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_NUMA
 	select SYS_SUPPORTS_SMP
-	select GENERIC_HARDIRQS_NO__DO_IRQ
 	help
 	  This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics
 	  workstations.  To compile a Linux kernel that runs on these, say Y
@@ -563,7 +557,6 @@ config MIKROTIK_RB532
 	select CEVT_R4K
 	select CSRC_R4K
 	select DMA_NONCOHERENT
-	select GENERIC_HARDIRQS_NO__DO_IRQ
 	select HW_HAS_PCI
 	select IRQ_CPU
 	select SYS_HAS_CPU_MIPS32_R1
@@ -700,8 +693,7 @@ config SCHED_OMIT_FRAME_POINTER
 	default y
 
 config GENERIC_HARDIRQS_NO__DO_IRQ
-	bool
-	default n
+	def_bool y
 
 #
 # Select some configuration options automatically based on user selections.
@@ -920,7 +912,6 @@ config SOC_PNX833X
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_SUPPORTS_BIG_ENDIAN
-	select GENERIC_HARDIRQS_NO__DO_IRQ
 	select GENERIC_GPIO
 	select CPU_MIPSR2_IRQ_VI
 
@@ -939,7 +930,6 @@ config SOC_PNX8550
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_HAS_EARLY_PRINTK
 	select SYS_SUPPORTS_32BIT_KERNEL
-	select GENERIC_HARDIRQS_NO__DO_IRQ
 	select GENERIC_GPIO
 
 config SWAP_IO_SPACE

arch/mips/alchemy/Kconfig

@@ -134,5 +134,4 @@ config SOC_AU1X00
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_APM_EMULATION
-	select GENERIC_HARDIRQS_NO__DO_IRQ
 	select ARCH_REQUIRE_GPIOLIB

arch/mips/kernel/irq-msc01.c

@@ -140,14 +140,16 @@ void __init init_msc_irqs(unsigned long icubase, unsigned int irqbase, msc_irqma
 
 		switch (imp->im_type) {
 		case MSC01_IRQ_EDGE:
-			set_irq_chip(irqbase+n, &msc_edgeirq_type);
+			set_irq_chip_and_handler_name(irqbase + n,
+				&msc_edgeirq_type, handle_edge_irq, "edge");
 			if (cpu_has_veic)
 				MSCIC_WRITE(MSC01_IC_SUP+n*8, MSC01_IC_SUP_EDGE_BIT);
 			else
 				MSCIC_WRITE(MSC01_IC_SUP+n*8, MSC01_IC_SUP_EDGE_BIT | imp->im_lvl);
 			break;
 		case MSC01_IRQ_LEVEL:
-			set_irq_chip(irqbase+n, &msc_levelirq_type);
+			set_irq_chip_and_handler_name(irqbase+n,
+				&msc_levelirq_type, handle_level_irq, "level");
 			if (cpu_has_veic)
 				MSCIC_WRITE(MSC01_IC_SUP+n*8, 0);
 			else

arch/mips/kernel/irq_cpu.c

@@ -112,7 +112,8 @@ void __init mips_cpu_irq_init(void)
 	 */
 	if (cpu_has_mipsmt)
 		for (i = irq_base; i < irq_base + 2; i++)
-			set_irq_chip(i, &mips_mt_cpu_irq_controller);
+			set_irq_chip_and_handler(i, &mips_mt_cpu_irq_controller,
+						 handle_percpu_irq);
 
 	for (i = irq_base + 2; i < irq_base + 8; i++)
 		set_irq_chip_and_handler(i, &mips_cpu_irq_controller,

arch/mips/sgi-ip32/ip32-irq.c

@@ -325,16 +325,11 @@ static void mask_and_ack_maceisa_irq(unsigned int irq)
 {
 	unsigned long mace_int;
 
-	switch (irq) {
-	case MACEISA_PARALLEL_IRQ:
-	case MACEISA_SERIAL1_TDMAPR_IRQ:
-	case MACEISA_SERIAL2_TDMAPR_IRQ:
-		/* edge triggered */
-		mace_int = mace->perif.ctrl.istat;
-		mace_int &= ~(1 << (irq - MACEISA_AUDIO_SW_IRQ));
-		mace->perif.ctrl.istat = mace_int;
-		break;
-	}
+	/* edge triggered */
+	mace_int = mace->perif.ctrl.istat;
+	mace_int &= ~(1 << (irq - MACEISA_AUDIO_SW_IRQ));
+	mace->perif.ctrl.istat = mace_int;
+
 	disable_maceisa_irq(irq);
 }
 
@@ -344,7 +339,16 @@ static void end_maceisa_irq(unsigned irq)
 		enable_maceisa_irq(irq);
 }
 
-static struct irq_chip ip32_maceisa_interrupt = {
+static struct irq_chip ip32_maceisa_level_interrupt = {
+	.name		= "IP32 MACE ISA",
+	.ack		= disable_maceisa_irq,
+	.mask		= disable_maceisa_irq,
+	.mask_ack	= disable_maceisa_irq,
+	.unmask		= enable_maceisa_irq,
+	.end		= end_maceisa_irq,
+};
+
+static struct irq_chip ip32_maceisa_edge_interrupt = {
 	.name		= "IP32 MACE ISA",
 	.ack		= mask_and_ack_maceisa_irq,
 	.mask		= disable_maceisa_irq,
@@ -500,27 +504,50 @@ void __init arch_init_irq(void)
 	for (irq = CRIME_IRQ_BASE; irq <= IP32_IRQ_MAX; irq++) {
 		switch (irq) {
 		case MACE_VID_IN1_IRQ ... MACE_PCI_BRIDGE_IRQ:
-			set_irq_chip(irq, &ip32_mace_interrupt);
+			set_irq_chip_and_handler_name(irq,&ip32_mace_interrupt,
+				handle_level_irq, "level");
 			break;
+
 		case MACEPCI_SCSI0_IRQ ...  MACEPCI_SHARED2_IRQ:
-			set_irq_chip(irq, &ip32_macepci_interrupt);
+			set_irq_chip_and_handler_name(irq,
+				&ip32_macepci_interrupt, handle_level_irq,
+				"level");
 			break;
+
 		case CRIME_GBE0_IRQ ... CRIME_GBE3_IRQ:
-			set_irq_chip(irq, &crime_edge_interrupt);
+			set_irq_chip_and_handler_name(irq,
+				&crime_edge_interrupt, handle_edge_irq, "edge");
 			break;
 		case CRIME_CPUERR_IRQ:
 		case CRIME_MEMERR_IRQ:
-			set_irq_chip(irq, &crime_level_interrupt);
+			set_irq_chip_and_handler_name(irq,
+				&crime_level_interrupt, handle_level_irq,
+				"level");
 			break;
+
 		case CRIME_RE_EMPTY_E_IRQ ... CRIME_RE_IDLE_E_IRQ:
 		case CRIME_SOFT0_IRQ ... CRIME_SOFT2_IRQ:
-			set_irq_chip(irq, &crime_edge_interrupt);
+			set_irq_chip_and_handler_name(irq,
+				&crime_edge_interrupt, handle_edge_irq, "edge");
 			break;
+
 		case CRIME_VICE_IRQ:
-			set_irq_chip(irq, &crime_edge_interrupt);
+			set_irq_chip_and_handler_name(irq,
+				&crime_edge_interrupt, handle_edge_irq, "edge");
+			break;
+
+		case MACEISA_PARALLEL_IRQ:
+		case MACEISA_SERIAL1_TDMAPR_IRQ:
+		case MACEISA_SERIAL2_TDMAPR_IRQ:
+			set_irq_chip_and_handler_name(irq,
+				&ip32_maceisa_edge_interrupt, handle_edge_irq,
+				"edge");
 			break;
+
 		default:
-			set_irq_chip(irq, &ip32_maceisa_interrupt);
+			set_irq_chip_and_handler_name(irq,
+				&ip32_maceisa_level_interrupt, handle_level_irq,
+				"level");
 			break;
 		}
 	}

arch/mips/sibyte/bcm1480/irq.c

@@ -236,7 +236,7 @@ void __init init_bcm1480_irqs(void)
 	int i;
 
 	for (i = 0; i < BCM1480_NR_IRQS; i++) {
-		set_irq_chip(i, &bcm1480_irq_type);
+		set_irq_chip_and_handler(i, &bcm1480_irq_type, handle_level_irq);
 		bcm1480_irq_owner[i] = 0;
 	}
 }

arch/mips/sibyte/sb1250/irq.c

@@ -220,7 +220,7 @@ void __init init_sb1250_irqs(void)
 	int i;
 
 	for (i = 0; i < SB1250_NR_IRQS; i++) {
-		set_irq_chip(i, &sb1250_irq_type);
+		set_irq_chip_and_handler(i, &sb1250_irq_type, handle_level_irq);
 		sb1250_irq_owner[i] = 0;
 	}
 }

arch/mips/sni/a20r.c

@@ -219,7 +219,7 @@ void __init sni_a20r_irq_init(void)
 	int i;
 
 	for (i = SNI_A20R_IRQ_BASE + 2 ; i < SNI_A20R_IRQ_BASE + 8; i++)
-		set_irq_chip(i, &a20r_irq_type);
+		set_irq_chip_and_handler(i, &a20r_irq_type, handle_level_irq);
 	sni_hwint = a20r_hwint;
 	change_c0_status(ST0_IM, IE_IRQ0);
 	setup_irq(SNI_A20R_IRQ_BASE + 3, &sni_isa_irq);

arch/mips/sni/pcimt.c

@@ -304,7 +304,7 @@ void __init sni_pcimt_irq_init(void)
 	mips_cpu_irq_init();
 	/* Actually we've got more interrupts to handle ...  */
 	for (i = PCIMT_IRQ_INT2; i <= PCIMT_IRQ_SCSI; i++)
-		set_irq_chip(i, &pcimt_irq_type);
+		set_irq_chip_and_handler(i, &pcimt_irq_type, handle_level_irq);
 	sni_hwint = sni_pcimt_hwint;
 	change_c0_status(ST0_IM, IE_IRQ1|IE_IRQ3);
 }

arch/mips/sni/pcit.c

@@ -246,7 +246,7 @@ void __init sni_pcit_irq_init(void)
 
 	mips_cpu_irq_init();
 	for (i = SNI_PCIT_INT_START; i <= SNI_PCIT_INT_END; i++)
-		set_irq_chip(i, &pcit_irq_type);
+		set_irq_chip_and_handler(i, &pcit_irq_type, handle_level_irq);
 	*(volatile u32 *)SNI_PCIT_INT_REG = 0;
 	sni_hwint = sni_pcit_hwint;
 	change_c0_status(ST0_IM, IE_IRQ1);
@@ -259,7 +259,7 @@ void __init sni_pcit_cplus_irq_init(void)
 
 	mips_cpu_irq_init();
 	for (i = SNI_PCIT_INT_START; i <= SNI_PCIT_INT_END; i++)
-		set_irq_chip(i, &pcit_irq_type);
+		set_irq_chip_and_handler(i, &pcit_irq_type, handle_level_irq);
 	*(volatile u32 *)SNI_PCIT_INT_REG = 0x40000000;
 	sni_hwint = sni_pcit_hwint_cplus;
 	change_c0_status(ST0_IM, IE_IRQ0);

arch/mips/sni/rm200.c

@@ -487,7 +487,7 @@ void __init sni_rm200_irq_init(void)
 	mips_cpu_irq_init();
 	/* Actually we've got more interrupts to handle ...  */
 	for (i = SNI_RM200_INT_START; i <= SNI_RM200_INT_END; i++)
-		set_irq_chip(i, &rm200_irq_type);
+		set_irq_chip_and_handler(i, &rm200_irq_type, handle_level_irq);
 	sni_hwint = sni_rm200_hwint;
 	change_c0_status(ST0_IM, IE_IRQ0);
 	setup_irq(SNI_RM200_INT_START + 0, &sni_rm200_i8259A_irq);

arch/mips/txx9/Kconfig

@@ -20,7 +20,6 @@ config MACH_TXX9
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_SUPPORTS_BIG_ENDIAN
-	select GENERIC_HARDIRQS_NO__DO_IRQ
 
 config TOSHIBA_JMR3927
 	bool "Toshiba JMR-TX3927 board"