MIPS: Netlogic: Merge platform usb.h to usb-init.c

The definitions are not used anywhere else, and merging it will
make adding the new USB definitions for XLPII series easier.
While there, cleanup some whitespace in usb-init.c. There is no
change to logic due to this commit.

Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Patchwork: http://patchwork.linux-mips.org/patch/5027/
Acked-by: John Crispin <blogic@openwrt.org>

arch/mips/include/asm/netlogic/xlp-hal/usb.h

@@ -1,64 +0,0 @@
-/*
- * Copyright (c) 2003-2012 Broadcom Corporation
- * All Rights Reserved
- *
- * This software is available to you under a choice of one of two
- * licenses.  You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the Broadcom
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef __NLM_HAL_USB_H__
-#define __NLM_HAL_USB_H__
-
-#define USB_CTL_0			0x01
-#define USB_PHY_0			0x0A
-#define USB_PHY_RESET			0x01
-#define USB_PHY_PORT_RESET_0		0x10
-#define USB_PHY_PORT_RESET_1		0x20
-#define USB_CONTROLLER_RESET		0x01
-#define USB_INT_STATUS			0x0E
-#define USB_INT_EN			0x0F
-#define USB_PHY_INTERRUPT_EN		0x01
-#define USB_OHCI_INTERRUPT_EN		0x02
-#define USB_OHCI_INTERRUPT1_EN		0x04
-#define USB_OHCI_INTERRUPT2_EN		0x08
-#define USB_CTRL_INTERRUPT_EN		0x10
-
-#ifndef __ASSEMBLY__
-
-#define nlm_read_usb_reg(b, r)			nlm_read_reg(b, r)
-#define nlm_write_usb_reg(b, r, v)		nlm_write_reg(b, r, v)
-#define nlm_get_usb_pcibase(node, inst)		\
-	nlm_pcicfg_base(XLP_IO_USB_OFFSET(node, inst))
-#define nlm_get_usb_hcd_base(node, inst)	\
-	nlm_xkphys_map_pcibar0(nlm_get_usb_pcibase(node, inst))
-#define nlm_get_usb_regbase(node, inst)		\
-	(nlm_get_usb_pcibase(node, inst) + XLP_IO_PCI_HDRSZ)
-
-#endif
-#endif /* __NLM_HAL_USB_H__ */

arch/mips/netlogic/xlp/usb-init.c

@@ -42,7 +42,30 @@
 #include <asm/netlogic/haldefs.h>
 #include <asm/netlogic/xlp-hal/iomap.h>
 #include <asm/netlogic/xlp-hal/xlp.h>
-#include <asm/netlogic/xlp-hal/usb.h>
+
+/*
+ * USB glue logic registers, used only during initialization
+ */
+#define USB_CTL_0			0x01
+#define USB_PHY_0			0x0A
+#define USB_PHY_RESET			0x01
+#define USB_PHY_PORT_RESET_0		0x10
+#define USB_PHY_PORT_RESET_1		0x20
+#define USB_CONTROLLER_RESET		0x01
+#define USB_INT_STATUS			0x0E
+#define USB_INT_EN			0x0F
+#define USB_PHY_INTERRUPT_EN		0x01
+#define USB_OHCI_INTERRUPT_EN		0x02
+#define USB_OHCI_INTERRUPT1_EN		0x04
+#define USB_OHCI_INTERRUPT2_EN		0x08
+#define USB_CTRL_INTERRUPT_EN		0x10
+
+#define nlm_read_usb_reg(b, r)			nlm_read_reg(b, r)
+#define nlm_write_usb_reg(b, r, v)		nlm_write_reg(b, r, v)
+#define nlm_get_usb_pcibase(node, inst)		\
+	nlm_pcicfg_base(XLP_IO_USB_OFFSET(node, inst))
+#define nlm_get_usb_regbase(node, inst)		\
+	(nlm_get_usb_pcibase(node, inst) + XLP_IO_PCI_HDRSZ)
 
 static void nlm_usb_intr_en(int node, int port)
 {
@@ -99,23 +122,23 @@ static void nlm_usb_fixup_final(struct pci_dev *dev)
 	dev->dev.coherent_dma_mask	= DMA_BIT_MASK(64);
 	switch (dev->devfn) {
 	case 0x10:
-	       dev->irq = PIC_EHCI_0_IRQ;
-	       break;
+		dev->irq = PIC_EHCI_0_IRQ;
+		break;
 	case 0x11:
-	       dev->irq = PIC_OHCI_0_IRQ;
-	       break;
+		dev->irq = PIC_OHCI_0_IRQ;
+		break;
 	case 0x12:
-	       dev->irq = PIC_OHCI_1_IRQ;
-	       break;
+		dev->irq = PIC_OHCI_1_IRQ;
+		break;
 	case 0x13:
-	       dev->irq = PIC_EHCI_1_IRQ;
-	       break;
+		dev->irq = PIC_EHCI_1_IRQ;
+		break;
 	case 0x14:
-	       dev->irq = PIC_OHCI_2_IRQ;
-	       break;
+		dev->irq = PIC_OHCI_2_IRQ;
+		break;
 	case 0x15:
-	       dev->irq = PIC_OHCI_3_IRQ;
-	       break;
+		dev->irq = PIC_OHCI_3_IRQ;
+		break;
 	}
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_NETLOGIC, PCI_DEVICE_ID_NLM_EHCI,