Merge branch 'gpio/next' of git://git.secretlab.ca/git/linux-2.6

* 'gpio/next' of git://git.secretlab.ca/git/linux-2.6: (61 commits)
  gpio/mxc/mxs: fix build error introduced by the irq_gc_ack() renaming
  mcp23s08: add i2c support
  mcp23s08: isolate spi specific parts
  mcp23s08: get rid of setup/teardown callbacks
  gpio/tegra: dt: add binding for gpio polarity
  mcp23s08: remove unused work queue
  gpio/da9052: remove a redundant assignment for gpio->da9052
  gpio/mxc: add device tree probe support
  ARM: mxc: use ARCH_NR_GPIOS to define gpio number
  gpio/mxc: get rid of the uses of cpu_is_mx()
  gpio/mxc: add missing initialization of basic_mmio_gpio shadow variables
  gpio: Move mpc5200 gpio driver to drivers/gpio
  GPIO: DA9052 GPIO module v3
  gpio/tegra: Use engineering names in DT compatible property
  of/gpio: Add new method for getting gpios under different property names
  gpio/dt: Refine GPIO device tree binding
  gpio/ml-ioh: fix off-by-one for displaying variable i in dev_err
  gpio/pca953x: Deprecate meaningless device-tree bindings
  gpio/pca953x: Remove dynamic platform data pointer
  gpio/pca953x: Fix IRQ support.
  ...

Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt

@@ -0,0 +1,22 @@
+* Freescale i.MX/MXC GPIO controller
+
+Required properties:
+- compatible : Should be "fsl,<soc>-gpio"
+- reg : Address and length of the register set for the device
+- interrupts : Should be the port interrupt shared by all 32 pins, if
+  one number.  If two numbers, the first one is the interrupt shared
+  by low 16 pins and the second one is for high 16 pins.
+- gpio-controller : Marks the device node as a gpio controller.
+- #gpio-cells : Should be two.  The first cell is the pin number and
+  the second cell is used to specify optional parameters (currently
+  unused).
+
+Example:
+
+gpio0: gpio@73f84000 {
+	compatible = "fsl,imx51-gpio", "fsl,imx31-gpio";
+	reg = <0x73f84000 0x4000>;
+	interrupts = <50 51>;
+	gpio-controller;
+	#gpio-cells = <2>;
+};

Documentation/devicetree/bindings/gpio/gpio.txt

@@ -4,17 +4,45 @@ Specifying GPIO information for devices
 1) gpios property
 -----------------
 
-Nodes that makes use of GPIOs should define them using `gpios' property,
-format of which is: <&gpio-controller1-phandle gpio1-specifier
-		     &gpio-controller2-phandle gpio2-specifier
-		     0 /* holes are permitted, means no GPIO 3 */
-		     &gpio-controller4-phandle gpio4-specifier
-		     ...>;
+Nodes that makes use of GPIOs should specify them using one or more
+properties, each containing a 'gpio-list':
 
-Note that gpio-specifier length is controller dependent.
+	gpio-list ::= <single-gpio> [gpio-list]
+	single-gpio ::= <gpio-phandle> <gpio-specifier>
+	gpio-phandle : phandle to gpio controller node
+	gpio-specifier : Array of #gpio-cells specifying specific gpio
+			 (controller specific)
+
+GPIO properties should be named "[<name>-]gpios".  Exact
+meaning of each gpios property must be documented in the device tree
+binding for each device.
+
+For example, the following could be used to describe gpios pins to use
+as chip select lines; with chip selects 0, 1 and 3 populated, and chip
+select 2 left empty:
+
+	gpio1: gpio1 {
+		gpio-controller
+		 #gpio-cells = <2>;
+	};
+	gpio2: gpio2 {
+		gpio-controller
+		 #gpio-cells = <1>;
+	};
+	[...]
+	 chipsel-gpios = <&gpio1 12 0>,
+			 <&gpio1 13 0>,
+			 <0>, /* holes are permitted, means no GPIO 2 */
+			 <&gpio2 2>;
+
+Note that gpio-specifier length is controller dependent.  In the
+above example, &gpio1 uses 2 cells to specify a gpio, while &gpio2
+only uses one.
 
 gpio-specifier may encode: bank, pin position inside the bank,
 whether pin is open-drain and whether pin is logically inverted.
+Exact meaning of each specifier cell is controller specific, and must
+be documented in the device tree binding for the device.
 
 Example of the node using GPIOs:
 
@@ -28,8 +56,8 @@ and empty GPIO flags as accepted by the "qe_pio_e" gpio-controller.
 2) gpio-controller nodes
 ------------------------
 
-Every GPIO controller node must have #gpio-cells property defined,
-this information will be used to translate gpio-specifiers.
+Every GPIO controller node must both an empty "gpio-controller"
+property, and have #gpio-cells contain the size of the gpio-specifier.
 
 Example of two SOC GPIO banks defined as gpio-controller nodes:
 

Documentation/devicetree/bindings/gpio/gpio_nvidia.txt

@@ -0,0 +1,8 @@
+NVIDIA Tegra 2 GPIO controller
+
+Required properties:
+- compatible : "nvidia,tegra20-gpio"
+- #gpio-cells : Should be two. The first cell is the pin number and the
+  second cell is used to specify optional parameters:
+  - bit 0 specifies polarity (0 for normal, 1 for inverted)
+- gpio-controller : Marks the device node as a GPIO controller.

arch/arm/mach-ep93xx/Makefile

@@ -1,7 +1,7 @@
 #
 # Makefile for the linux kernel.
 #
-obj-y			:= core.o clock.o dma-m2p.o gpio.o
+obj-y			:= core.o clock.o dma-m2p.o
 obj-m			:=
 obj-n			:=
 obj-			:=

arch/arm/mach-ep93xx/core.c

@@ -174,14 +174,10 @@ struct sys_timer ep93xx_timer = {
 /*************************************************************************
  * EP93xx IRQ handling
  *************************************************************************/
-extern void ep93xx_gpio_init_irq(void);
-
 void __init ep93xx_init_irq(void)
 {
 	vic_init(EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
 	vic_init(EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0);
-
-	ep93xx_gpio_init_irq();
 }
 
 
@@ -240,6 +236,24 @@ unsigned int ep93xx_chip_revision(void)
 	return v;
 }
 
+/*************************************************************************
+ * EP93xx GPIO
+ *************************************************************************/
+static struct resource ep93xx_gpio_resource[] = {
+	{
+		.start		= EP93XX_GPIO_PHYS_BASE,
+		.end		= EP93XX_GPIO_PHYS_BASE + 0xcc - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device ep93xx_gpio_device = {
+	.name		= "gpio-ep93xx",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(ep93xx_gpio_resource),
+	.resource	= ep93xx_gpio_resource,
+};
+
 /*************************************************************************
  * EP93xx peripheral handling
  *************************************************************************/
@@ -870,14 +884,13 @@ void __init ep93xx_register_ac97(void)
 	platform_device_register(&ep93xx_pcm_device);
 }
 
-extern void ep93xx_gpio_init(void);
-
 void __init ep93xx_init_devices(void)
 {
 	/* Disallow access to MaverickCrunch initially */
 	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_CPENA);
 
-	ep93xx_gpio_init();
+	/* Get the GPIO working early, other devices need it */
+	platform_device_register(&ep93xx_gpio_device);
 
 	amba_device_register(&uart1_device, &iomem_resource);
 	amba_device_register(&uart2_device, &iomem_resource);

arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h

@@ -98,6 +98,7 @@
 
 #define EP93XX_SECURITY_BASE		EP93XX_APB_IOMEM(0x00030000)
 
+#define EP93XX_GPIO_PHYS_BASE		EP93XX_APB_PHYS(0x00040000)
 #define EP93XX_GPIO_BASE		EP93XX_APB_IOMEM(0x00040000)
 #define EP93XX_GPIO_REG(x)		(EP93XX_GPIO_BASE + (x))
 #define EP93XX_GPIO_F_INT_STATUS	EP93XX_GPIO_REG(0x5c)

arch/arm/mach-imx/mach-apf9328.c

@@ -115,6 +115,8 @@ static struct platform_device *devices[] __initdata = {
 
 static void __init apf9328_init(void)
 {
+	imx1_soc_init();
+
 	mxc_gpio_setup_multiple_pins(apf9328_pins,
 			ARRAY_SIZE(apf9328_pins),
 			"APF9328");

arch/arm/mach-imx/mach-armadillo5x0.c

@@ -490,6 +490,8 @@ static struct platform_device *devices[] __initdata = {
  */
 static void __init armadillo5x0_init(void)
 {
+	imx31_soc_init();
+
 	mxc_iomux_setup_multiple_pins(armadillo5x0_pins,
 			ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0");
 

arch/arm/mach-imx/mach-bug.c

@@ -42,6 +42,8 @@ static const unsigned int bug_pins[] __initconst = {
 
 static void __init bug_board_init(void)
 {
+	imx31_soc_init();
+
 	mxc_iomux_setup_multiple_pins(bug_pins,
 				      ARRAY_SIZE(bug_pins), "uart-4");
 	imx31_add_imx_uart4(&uart_pdata);

arch/arm/mach-imx/mach-cpuimx27.c

@@ -250,6 +250,8 @@ __setup("otg_mode=", eukrea_cpuimx27_otg_mode);
 
 static void __init eukrea_cpuimx27_init(void)
 {
+	imx27_soc_init();
+
 	mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins,
 		ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27");
 

arch/arm/mach-imx/mach-cpuimx35.c

@@ -156,6 +156,8 @@ __setup("otg_mode=", eukrea_cpuimx35_otg_mode);
  */
 static void __init eukrea_cpuimx35_init(void)
 {
+	imx35_soc_init();
+
 	mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx35_pads,
 			ARRAY_SIZE(eukrea_cpuimx35_pads));
 

arch/arm/mach-imx/mach-eukrea_cpuimx25.c

@@ -125,6 +125,8 @@ __setup("otg_mode=", eukrea_cpuimx25_otg_mode);
 
 static void __init eukrea_cpuimx25_init(void)
 {
+	imx25_soc_init();
+
 	if (mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx25_pads,
 			ARRAY_SIZE(eukrea_cpuimx25_pads)))
 		printk(KERN_ERR "error setting cpuimx25 pads !\n");

arch/arm/mach-imx/mach-imx27_visstrim_m10.c

@@ -231,6 +231,8 @@ static void __init visstrim_m10_board_init(void)
 {
 	int ret;
 
+	imx27_soc_init();
+
 	ret = mxc_gpio_setup_multiple_pins(visstrim_m10_pins,
 			ARRAY_SIZE(visstrim_m10_pins), "VISSTRIM_M10");
 	if (ret)

arch/arm/mach-imx/mach-imx27ipcam.c

@@ -50,6 +50,8 @@ static const int mx27ipcam_pins[] __initconst = {
 
 static void __init mx27ipcam_init(void)
 {
+	imx27_soc_init();
+
 	mxc_gpio_setup_multiple_pins(mx27ipcam_pins, ARRAY_SIZE(mx27ipcam_pins),
 		"mx27ipcam");
 

arch/arm/mach-imx/mach-imx27lite.c

@@ -59,6 +59,8 @@ static const struct imxuart_platform_data uart_pdata __initconst = {
 
 static void __init mx27lite_init(void)
 {
+	imx27_soc_init();
+
 	mxc_gpio_setup_multiple_pins(mx27lite_pins, ARRAY_SIZE(mx27lite_pins),
 		"imx27lite");
 	imx27_add_imx_uart0(&uart_pdata);

arch/arm/mach-imx/mach-kzm_arm11_01.c

@@ -223,6 +223,8 @@ static int kzm_pins[] __initdata = {
  */
 static void __init kzm_board_init(void)
 {
+	imx31_soc_init();
+
 	mxc_iomux_setup_multiple_pins(kzm_pins,
 				      ARRAY_SIZE(kzm_pins), "kzm");
 	kzm_init_ext_uart();

arch/arm/mach-imx/mach-mx1ads.c

@@ -115,6 +115,8 @@ static struct i2c_board_info mx1ads_i2c_devices[] = {
  */
 static void __init mx1ads_init(void)
 {
+	imx1_soc_init();
+
 	mxc_gpio_setup_multiple_pins(mx1ads_pins,
 		ARRAY_SIZE(mx1ads_pins), "mx1ads");
 

arch/arm/mach-imx/mach-mx21ads.c

@@ -279,6 +279,8 @@ static struct platform_device *platform_devices[] __initdata = {
 
 static void __init mx21ads_board_init(void)
 {
+	imx21_soc_init();
+
 	mxc_gpio_setup_multiple_pins(mx21ads_pins, ARRAY_SIZE(mx21ads_pins),
 			"mx21ads");
 

arch/arm/mach-imx/mach-mx25_3ds.c

@@ -219,6 +219,8 @@ static const struct esdhc_platform_data mx25pdk_esdhc_pdata __initconst = {
 
 static void __init mx25pdk_init(void)
 {
+	imx25_soc_init();
+
 	mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
 			ARRAY_SIZE(mx25pdk_pads));
 

arch/arm/mach-imx/mach-mx27_3ds.c

@@ -267,6 +267,8 @@ static const struct imxi2c_platform_data mx27_3ds_i2c0_data __initconst = {
 
 static void __init mx27pdk_init(void)
 {
+	imx27_soc_init();
+
 	mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
 		"mx27pdk");
 	mx27_3ds_sdhc1_enable_level_translator();

arch/arm/mach-imx/mach-mx27ads.c

@@ -288,6 +288,8 @@ static const struct imxuart_platform_data uart_pdata __initconst = {
 
 static void __init mx27ads_board_init(void)
 {
+	imx27_soc_init();
+
 	mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins),
 			"mx27ads");
 

arch/arm/mach-imx/mach-mx31_3ds.c

@@ -690,6 +690,8 @@ static void __init mx31_3ds_init(void)
 {
 	int ret;
 
+	imx31_soc_init();
+
 	mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins),
 				      "mx31_3ds");
 

arch/arm/mach-imx/mach-mx31ads.c

@@ -516,6 +516,8 @@ static void __init mx31ads_init_irq(void)
 
 static void __init mx31ads_init(void)
 {
+	imx31_soc_init();
+
 	mxc_init_extuart();
 	mxc_init_imx_uart();
 	mxc_init_i2c();

arch/arm/mach-imx/mach-mx31lilly.c

@@ -243,6 +243,8 @@ core_param(mx31lilly_baseboard, mx31lilly_baseboard, int, 0444);
 
 static void __init mx31lilly_board_init(void)
 {
+	imx31_soc_init();
+
 	switch (mx31lilly_baseboard) {
 	case MX31LILLY_NOBOARD:
 		break;

arch/arm/mach-imx/mach-mx31lite.c

@@ -230,6 +230,8 @@ static void __init mx31lite_init(void)
 {
 	int ret;
 
+	imx31_soc_init();
+
 	switch (mx31lite_baseboard) {
 	case MX31LITE_NOBOARD:
 		break;

arch/arm/mach-imx/mach-mx31moboard.c

@@ -507,6 +507,8 @@ core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444);
  */
 static void __init mx31moboard_init(void)
 {
+	imx31_soc_init();
+
 	mxc_iomux_setup_multiple_pins(moboard_pins, ARRAY_SIZE(moboard_pins),
 		"moboard");
 

arch/arm/mach-imx/mach-mx35_3ds.c

@@ -179,6 +179,8 @@ static const struct imxi2c_platform_data mx35_3ds_i2c0_data __initconst = {
  */
 static void __init mx35_3ds_init(void)
 {
+	imx35_soc_init();
+
 	mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads));
 
 	imx35_add_fec(NULL);

arch/arm/mach-imx/mach-mxt_td60.c

@@ -233,6 +233,8 @@ static const struct imxuart_platform_data uart_pdata __initconst = {
 
 static void __init mxt_td60_board_init(void)
 {
+	imx27_soc_init();
+
 	mxc_gpio_setup_multiple_pins(mxt_td60_pins, ARRAY_SIZE(mxt_td60_pins),
 			"MXT_TD60");
 

arch/arm/mach-imx/mach-pca100.c

@@ -357,6 +357,8 @@ static void __init pca100_init(void)
 {
 	int ret;
 
+	imx27_soc_init();
+
 	/* SSI unit */
 	mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0,
 				  MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */

arch/arm/mach-imx/mach-pcm037.c

@@ -576,6 +576,8 @@ static void __init pcm037_init(void)
 {
 	int ret;
 
+	imx31_soc_init();
+
 	mxc_iomux_set_gpr(MUX_PGP_UH2, 1);
 
 	mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins),

arch/arm/mach-imx/mach-pcm038.c

@@ -295,6 +295,8 @@ static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
 
 static void __init pcm038_init(void)
 {
+	imx27_soc_init();
+
 	mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins),
 			"PCM038");
 

arch/arm/mach-imx/mach-pcm043.c

@@ -356,6 +356,8 @@ static struct esdhc_platform_data sd1_pdata = {
  */
 static void __init pcm043_init(void)
 {
+	imx35_soc_init();
+
 	mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads));
 
 	mxc_audmux_v2_configure_port(3,

arch/arm/mach-imx/mach-qong.c

@@ -244,6 +244,8 @@ static void __init qong_init_fpga(void)
  */
 static void __init qong_init(void)
 {
+	imx31_soc_init();
+
 	mxc_init_imx_uart();
 	qong_init_nor_mtd();
 	qong_init_fpga();

arch/arm/mach-imx/mach-scb9328.c

@@ -129,6 +129,8 @@ static struct platform_device *devices[] __initdata = {
  */
 static void __init scb9328_init(void)
 {
+	imx1_soc_init();
+
 	imx1_add_imx_uart0(&uart_pdata);
 
 	printk(KERN_INFO"Scb9328: Adding devices\n");

arch/arm/mach-imx/mach-vpr200.c

@@ -267,6 +267,8 @@ static struct platform_device *devices[] __initdata = {
  */
 static void __init vpr200_board_init(void)
 {
+	imx35_soc_init();
+
 	mxc_iomux_v3_setup_multiple_pads(vpr200_pads, ARRAY_SIZE(vpr200_pads));
 
 	imx35_add_fec(NULL);

arch/arm/mach-imx/mm-imx1.c

@@ -23,7 +23,6 @@
 
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/gpio.h>
 #include <mach/irqs.h>
 #include <mach/iomux-v1.h>
 
@@ -44,15 +43,19 @@ void __init imx1_init_early(void)
 			MX1_NUM_GPIO_PORT);
 }
 
-static struct mxc_gpio_port imx1_gpio_ports[] = {
-	DEFINE_IMX_GPIO_PORT_IRQ(MX1, 0, 1, MX1_GPIO_INT_PORTA),
-	DEFINE_IMX_GPIO_PORT_IRQ(MX1, 1, 2, MX1_GPIO_INT_PORTB),
-	DEFINE_IMX_GPIO_PORT_IRQ(MX1, 2, 3, MX1_GPIO_INT_PORTC),
-	DEFINE_IMX_GPIO_PORT_IRQ(MX1, 3, 4, MX1_GPIO_INT_PORTD),
-};
-
 void __init mx1_init_irq(void)
 {
 	mxc_init_irq(MX1_IO_ADDRESS(MX1_AVIC_BASE_ADDR));
-	mxc_gpio_init(imx1_gpio_ports,	ARRAY_SIZE(imx1_gpio_ports));
+}
+
+void __init imx1_soc_init(void)
+{
+	mxc_register_gpio("imx1-gpio", 0, MX1_GPIO1_BASE_ADDR, SZ_256,
+						MX1_GPIO_INT_PORTA, 0);
+	mxc_register_gpio("imx1-gpio", 1, MX1_GPIO2_BASE_ADDR, SZ_256,
+						MX1_GPIO_INT_PORTB, 0);
+	mxc_register_gpio("imx1-gpio", 2, MX1_GPIO3_BASE_ADDR, SZ_256,
+						MX1_GPIO_INT_PORTC, 0);
+	mxc_register_gpio("imx1-gpio", 3, MX1_GPIO4_BASE_ADDR, SZ_256,
+						MX1_GPIO_INT_PORTD, 0);
 }

arch/arm/mach-imx/mm-imx21.c

@@ -24,7 +24,6 @@
 #include <mach/common.h>
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
-#include <mach/gpio.h>
 #include <mach/irqs.h>
 #include <mach/iomux-v1.h>
 
@@ -70,17 +69,17 @@ void __init imx21_init_early(void)
 			MX21_NUM_GPIO_PORT);
 }
 
-static struct mxc_gpio_port imx21_gpio_ports[] = {
-	DEFINE_IMX_GPIO_PORT_IRQ(MX21, 0, 1, MX21_INT_GPIO),
-	DEFINE_IMX_GPIO_PORT(MX21, 1, 2),
-	DEFINE_IMX_GPIO_PORT(MX21, 2, 3),
-	DEFINE_IMX_GPIO_PORT(MX21, 3, 4),
-	DEFINE_IMX_GPIO_PORT(MX21, 4, 5),
-	DEFINE_IMX_GPIO_PORT(MX21, 5, 6),
-};
-
 void __init mx21_init_irq(void)
 {
 	mxc_init_irq(MX21_IO_ADDRESS(MX21_AVIC_BASE_ADDR));
-	mxc_gpio_init(imx21_gpio_ports,	ARRAY_SIZE(imx21_gpio_ports));
+}
+
+void __init imx21_soc_init(void)
+{
+	mxc_register_gpio("imx21-gpio", 0, MX21_GPIO1_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
+	mxc_register_gpio("imx21-gpio", 1, MX21_GPIO2_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
+	mxc_register_gpio("imx21-gpio", 2, MX21_GPIO3_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
+	mxc_register_gpio("imx21-gpio", 3, MX21_GPIO4_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
+	mxc_register_gpio("imx21-gpio", 4, MX21_GPIO5_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
+	mxc_register_gpio("imx21-gpio", 5, MX21_GPIO6_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
 }

arch/arm/mach-imx/mm-imx25.c

@@ -27,7 +27,6 @@
 #include <mach/hardware.h>
 #include <mach/mx25.h>
 #include <mach/iomux-v3.h>
-#include <mach/gpio.h>
 #include <mach/irqs.h>
 
 /*
@@ -57,16 +56,16 @@ void __init imx25_init_early(void)
 	mxc_arch_reset_init(MX25_IO_ADDRESS(MX25_WDOG_BASE_ADDR));
 }
 
-static struct mxc_gpio_port imx25_gpio_ports[] = {
-	DEFINE_IMX_GPIO_PORT_IRQ(MX25, 0, 1, MX25_INT_GPIO1),
-	DEFINE_IMX_GPIO_PORT_IRQ(MX25, 1, 2, MX25_INT_GPIO2),
-	DEFINE_IMX_GPIO_PORT_IRQ(MX25, 2, 3, MX25_INT_GPIO3),
-	DEFINE_IMX_GPIO_PORT_IRQ(MX25, 3, 4, MX25_INT_GPIO4),
-};
-
 void __init mx25_init_irq(void)
 {
 	mxc_init_irq(MX25_IO_ADDRESS(MX25_AVIC_BASE_ADDR));
-	mxc_gpio_init(imx25_gpio_ports,	ARRAY_SIZE(imx25_gpio_ports));
 }
 
+void __init imx25_soc_init(void)
+{
+	/* i.mx25 has the i.mx31 type gpio */
+	mxc_register_gpio("imx31-gpio", 0, MX25_GPIO1_BASE_ADDR, SZ_16K, MX25_INT_GPIO1, 0);
+	mxc_register_gpio("imx31-gpio", 1, MX25_GPIO2_BASE_ADDR, SZ_16K, MX25_INT_GPIO2, 0);
+	mxc_register_gpio("imx31-gpio", 2, MX25_GPIO3_BASE_ADDR, SZ_16K, MX25_INT_GPIO3, 0);
+	mxc_register_gpio("imx31-gpio", 3, MX25_GPIO4_BASE_ADDR, SZ_16K, MX25_INT_GPIO4, 0);
+}

arch/arm/mach-imx/mm-imx27.c

@@ -24,7 +24,6 @@
 #include <mach/common.h>
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
-#include <mach/gpio.h>
 #include <mach/irqs.h>
 #include <mach/iomux-v1.h>
 
@@ -70,17 +69,18 @@ void __init imx27_init_early(void)
 			MX27_NUM_GPIO_PORT);
 }
 
-static struct mxc_gpio_port imx27_gpio_ports[] = {
-	DEFINE_IMX_GPIO_PORT_IRQ(MX27, 0, 1, MX27_INT_GPIO),
-	DEFINE_IMX_GPIO_PORT(MX27, 1, 2),
-	DEFINE_IMX_GPIO_PORT(MX27, 2, 3),
-	DEFINE_IMX_GPIO_PORT(MX27, 3, 4),
-	DEFINE_IMX_GPIO_PORT(MX27, 4, 5),
-	DEFINE_IMX_GPIO_PORT(MX27, 5, 6),
-};
-
 void __init mx27_init_irq(void)
 {
 	mxc_init_irq(MX27_IO_ADDRESS(MX27_AVIC_BASE_ADDR));
-	mxc_gpio_init(imx27_gpio_ports,	ARRAY_SIZE(imx27_gpio_ports));
+}
+
+void __init imx27_soc_init(void)
+{
+	/* i.mx27 has the i.mx21 type gpio */
+	mxc_register_gpio("imx21-gpio", 0, MX27_GPIO1_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
+	mxc_register_gpio("imx21-gpio", 1, MX27_GPIO2_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
+	mxc_register_gpio("imx21-gpio", 2, MX27_GPIO3_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
+	mxc_register_gpio("imx21-gpio", 3, MX27_GPIO4_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
+	mxc_register_gpio("imx21-gpio", 4, MX27_GPIO5_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
+	mxc_register_gpio("imx21-gpio", 5, MX27_GPIO6_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
 }

arch/arm/mach-imx/mm-imx31.c

@@ -26,7 +26,6 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/iomux-v3.h>
-#include <mach/gpio.h>
 #include <mach/irqs.h>
 
 static struct map_desc mx31_io_desc[] __initdata = {
@@ -53,14 +52,14 @@ void __init imx31_init_early(void)
 	mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
 }
 
-static struct mxc_gpio_port imx31_gpio_ports[] = {
-	DEFINE_IMX_GPIO_PORT_IRQ(MX31, 0, 1, MX31_INT_GPIO1),
-	DEFINE_IMX_GPIO_PORT_IRQ(MX31, 1, 2, MX31_INT_GPIO2),
-	DEFINE_IMX_GPIO_PORT_IRQ(MX31, 2, 3, MX31_INT_GPIO3),
-};
-
 void __init mx31_init_irq(void)
 {
 	mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR));
-	mxc_gpio_init(imx31_gpio_ports,	ARRAY_SIZE(imx31_gpio_ports));
+}
+
+void __init imx31_soc_init(void)
+{
+	mxc_register_gpio("imx31-gpio", 0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0);
+	mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0);
+	mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0);
 }

arch/arm/mach-imx/mm-imx35.c

@@ -27,7 +27,6 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/iomux-v3.h>
-#include <mach/gpio.h>
 #include <mach/irqs.h>
 
 static struct map_desc mx35_io_desc[] __initdata = {
@@ -50,14 +49,15 @@ void __init imx35_init_early(void)
 	mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
 }
 
-static struct mxc_gpio_port imx35_gpio_ports[] = {
-	DEFINE_IMX_GPIO_PORT_IRQ(MX35, 0, 1, MX35_INT_GPIO1),
-	DEFINE_IMX_GPIO_PORT_IRQ(MX35, 1, 2, MX35_INT_GPIO2),
-	DEFINE_IMX_GPIO_PORT_IRQ(MX35, 2, 3, MX35_INT_GPIO3),
-};
-
 void __init mx35_init_irq(void)
 {
 	mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
-	mxc_gpio_init(imx35_gpio_ports,	ARRAY_SIZE(imx35_gpio_ports));
+}
+
+void __init imx35_soc_init(void)
+{
+	/* i.mx35 has the i.mx31 type gpio */
+	mxc_register_gpio("imx31-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0);
+	mxc_register_gpio("imx31-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0);
+	mxc_register_gpio("imx31-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0);
 }

arch/arm/mach-mx5/board-cpuimx51.c

@@ -245,6 +245,8 @@ __setup("otg_mode=", eukrea_cpuimx51_otg_mode);
  */
 static void __init eukrea_cpuimx51_init(void)
 {
+	imx51_soc_init();
+
 	mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51_pads,
 					ARRAY_SIZE(eukrea_cpuimx51_pads));
 

arch/arm/mach-mx5/board-cpuimx51sd.c

@@ -264,6 +264,8 @@ static struct platform_device *platform_devices[] __initdata = {
 
 static void __init eukrea_cpuimx51sd_init(void)
 {
+	imx51_soc_init();
+
 	mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51sd_pads,
 					ARRAY_SIZE(eukrea_cpuimx51sd_pads));
 

arch/arm/mach-mx5/board-mx50_rdp.c

@@ -192,6 +192,8 @@ static const struct imxi2c_platform_data i2c_data __initconst = {
  */
 static void __init mx50_rdp_board_init(void)
 {
+	imx50_soc_init();
+
 	mxc_iomux_v3_setup_multiple_pads(mx50_rdp_pads,
 					ARRAY_SIZE(mx50_rdp_pads));
 

arch/arm/mach-mx5/board-mx51_3ds.c

@@ -135,6 +135,8 @@ static struct spi_board_info mx51_3ds_spi_nor_device[] = {
  */
 static void __init mx51_3ds_init(void)
 {
+	imx51_soc_init();
+
 	mxc_iomux_v3_setup_multiple_pads(mx51_3ds_pads,
 					ARRAY_SIZE(mx51_3ds_pads));
 

arch/arm/mach-mx5/board-mx51_babbage.c

@@ -340,6 +340,8 @@ static void __init mx51_babbage_init(void)
 	iomux_v3_cfg_t power_key = _MX51_PAD_EIM_A27__GPIO2_21 |
 		MUX_PAD_CTRL(PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP);
 
+	imx51_soc_init();
+
 #if defined(CONFIG_CPU_FREQ_IMX)
 	get_cpu_op = mx51_get_cpu_op;
 #endif

arch/arm/mach-mx5/board-mx51_efikamx.c

@@ -236,6 +236,8 @@ late_initcall(mx51_efikamx_power_init);
 
 static void __init mx51_efikamx_init(void)
 {
+	imx51_soc_init();
+
 	mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads,
 					ARRAY_SIZE(mx51efikamx_pads));
 	efika_board_common_init();

arch/arm/mach-mx5/board-mx51_efikasb.c

@@ -248,6 +248,8 @@ static void __init mx51_efikasb_board_id(void)
 
 static void __init efikasb_board_init(void)
 {
+	imx51_soc_init();
+
 	mxc_iomux_v3_setup_multiple_pads(mx51efikasb_pads,
 					ARRAY_SIZE(mx51efikasb_pads));
 	efika_board_common_init();

arch/arm/mach-mx5/board-mx53_evk.c

@@ -117,6 +117,8 @@ static const struct spi_imx_master mx53_evk_spi_data __initconst = {
 
 static void __init mx53_evk_board_init(void)
 {
+	imx53_soc_init();
+
 	mxc_iomux_v3_setup_multiple_pads(mx53_evk_pads,
 					ARRAY_SIZE(mx53_evk_pads));
 	mx53_evk_init_uart();

arch/arm/mach-mx5/board-mx53_loco.c

@@ -227,6 +227,8 @@ static const struct imxi2c_platform_data mx53_loco_i2c_data __initconst = {
 
 static void __init mx53_loco_board_init(void)
 {
+	imx53_soc_init();
+
 	mxc_iomux_v3_setup_multiple_pads(mx53_loco_pads,
 					ARRAY_SIZE(mx53_loco_pads));
 	imx53_add_imx_uart(0, NULL);

arch/arm/mach-mx5/board-mx53_smd.c

@@ -113,6 +113,8 @@ static const struct imxi2c_platform_data mx53_smd_i2c_data __initconst = {
 
 static void __init mx53_smd_board_init(void)
 {
+	imx53_soc_init();
+
 	mxc_iomux_v3_setup_multiple_pads(mx53_smd_pads,
 					ARRAY_SIZE(mx53_smd_pads));
 	mx53_smd_init_uart();

arch/arm/mach-mx5/devices.c

@@ -12,7 +12,6 @@
 
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
-#include <linux/gpio.h>
 #include <mach/hardware.h>
 #include <mach/imx-uart.h>
 #include <mach/irqs.h>
@@ -119,66 +118,3 @@ struct platform_device mxc_usbh2_device = {
 		.coherent_dma_mask = DMA_BIT_MASK(32),
 	},
 };
-
-static struct mxc_gpio_port mxc_gpio_ports[] = {
-	{
-		.chip.label = "gpio-0",
-		.base = MX51_IO_ADDRESS(MX51_GPIO1_BASE_ADDR),
-		.irq = MX51_MXC_INT_GPIO1_LOW,
-		.irq_high = MX51_MXC_INT_GPIO1_HIGH,
-		.virtual_irq_start = MXC_GPIO_IRQ_START
-	},
-	{
-		.chip.label = "gpio-1",
-		.base = MX51_IO_ADDRESS(MX51_GPIO2_BASE_ADDR),
-		.irq = MX51_MXC_INT_GPIO2_LOW,
-		.irq_high = MX51_MXC_INT_GPIO2_HIGH,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 1
-	},
-	{
-		.chip.label = "gpio-2",
-		.base = MX51_IO_ADDRESS(MX51_GPIO3_BASE_ADDR),
-		.irq = MX51_MXC_INT_GPIO3_LOW,
-		.irq_high = MX51_MXC_INT_GPIO3_HIGH,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 2
-	},
-	{
-		.chip.label = "gpio-3",
-		.base = MX51_IO_ADDRESS(MX51_GPIO4_BASE_ADDR),
-		.irq = MX51_MXC_INT_GPIO4_LOW,
-		.irq_high = MX51_MXC_INT_GPIO4_HIGH,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 3
-	},
-	{
-		.chip.label = "gpio-4",
-		.base = MX53_IO_ADDRESS(MX53_GPIO5_BASE_ADDR),
-		.irq = MX53_INT_GPIO5_LOW,
-		.irq_high = MX53_INT_GPIO5_HIGH,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 4
-	},
-	{
-		.chip.label = "gpio-5",
-		.base = MX53_IO_ADDRESS(MX53_GPIO6_BASE_ADDR),
-		.irq = MX53_INT_GPIO6_LOW,
-		.irq_high = MX53_INT_GPIO6_HIGH,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 5
-	},
-	{
-		.chip.label = "gpio-6",
-		.base = MX53_IO_ADDRESS(MX53_GPIO7_BASE_ADDR),
-		.irq = MX53_INT_GPIO7_LOW,
-		.irq_high = MX53_INT_GPIO7_HIGH,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 6
-	},
-};
-
-int __init imx51_register_gpios(void)
-{
-	return mxc_gpio_init(mxc_gpio_ports, 4);
-}
-
-int __init imx53_register_gpios(void)
-{
-	return mxc_gpio_init(mxc_gpio_ports, ARRAY_SIZE(mxc_gpio_ports));
-}
-

arch/arm/mach-mx5/mm-mx50.c

@@ -26,7 +26,6 @@
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/iomux-v3.h>
-#include <mach/gpio.h>
 #include <mach/irqs.h>
 
 /*
@@ -56,17 +55,18 @@ void __init imx50_init_early(void)
 	mxc_arch_reset_init(MX50_IO_ADDRESS(MX50_WDOG_BASE_ADDR));
 }
 
-static struct mxc_gpio_port imx50_gpio_ports[] = {
-	DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 0, 1, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH),
-	DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 1, 2, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH),
-	DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 2, 3, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH),
-	DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 3, 4, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH),
-	DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 4, 5, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH),
-	DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 5, 6, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH),
-};
-
 void __init mx50_init_irq(void)
 {
 	tzic_init_irq(MX50_IO_ADDRESS(MX50_TZIC_BASE_ADDR));
-	mxc_gpio_init(imx50_gpio_ports,	ARRAY_SIZE(imx50_gpio_ports));
+}
+
+void __init imx50_soc_init(void)
+{
+	/* i.mx50 has the i.mx31 type gpio */
+	mxc_register_gpio("imx31-gpio", 0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH);
+	mxc_register_gpio("imx31-gpio", 1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH);
+	mxc_register_gpio("imx31-gpio", 2, MX50_GPIO3_BASE_ADDR, SZ_16K, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH);
+	mxc_register_gpio("imx31-gpio", 3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH);
+	mxc_register_gpio("imx31-gpio", 4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH);
+	mxc_register_gpio("imx31-gpio", 5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH);
 }

arch/arm/mach-mx5/mm.c

@@ -69,8 +69,6 @@ void __init imx53_init_early(void)
 	mxc_arch_reset_init(MX53_IO_ADDRESS(MX53_WDOG1_BASE_ADDR));
 }
 
-int imx51_register_gpios(void);
-
 void __init mx51_init_irq(void)
 {
 	unsigned long tzic_addr;
@@ -86,11 +84,8 @@ void __init mx51_init_irq(void)
 		panic("unable to map TZIC interrupt controller\n");
 
 	tzic_init_irq(tzic_virt);
-	imx51_register_gpios();
 }
 
-int imx53_register_gpios(void);
-
 void __init mx53_init_irq(void)
 {
 	unsigned long tzic_addr;
@@ -103,5 +98,25 @@ void __init mx53_init_irq(void)
 		panic("unable to map TZIC interrupt controller\n");
 
 	tzic_init_irq(tzic_virt);
-	imx53_register_gpios();
+}
+
+void __init imx51_soc_init(void)
+{
+	/* i.mx51 has the i.mx31 type gpio */
+	mxc_register_gpio("imx31-gpio", 0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO1_LOW, MX51_MXC_INT_GPIO1_HIGH);
+	mxc_register_gpio("imx31-gpio", 1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO2_LOW, MX51_MXC_INT_GPIO2_HIGH);
+	mxc_register_gpio("imx31-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO3_LOW, MX51_MXC_INT_GPIO3_HIGH);
+	mxc_register_gpio("imx31-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO4_LOW, MX51_MXC_INT_GPIO4_HIGH);
+}
+
+void __init imx53_soc_init(void)
+{
+	/* i.mx53 has the i.mx31 type gpio */
+	mxc_register_gpio("imx31-gpio", 0, MX53_GPIO1_BASE_ADDR, SZ_16K, MX53_INT_GPIO1_LOW, MX53_INT_GPIO1_HIGH);
+	mxc_register_gpio("imx31-gpio", 1, MX53_GPIO2_BASE_ADDR, SZ_16K, MX53_INT_GPIO2_LOW, MX53_INT_GPIO2_HIGH);
+	mxc_register_gpio("imx31-gpio", 2, MX53_GPIO3_BASE_ADDR, SZ_16K, MX53_INT_GPIO3_LOW, MX53_INT_GPIO3_HIGH);
+	mxc_register_gpio("imx31-gpio", 3, MX53_GPIO4_BASE_ADDR, SZ_16K, MX53_INT_GPIO4_LOW, MX53_INT_GPIO4_HIGH);
+	mxc_register_gpio("imx31-gpio", 4, MX53_GPIO5_BASE_ADDR, SZ_16K, MX53_INT_GPIO5_LOW, MX53_INT_GPIO5_HIGH);
+	mxc_register_gpio("imx31-gpio", 5, MX53_GPIO6_BASE_ADDR, SZ_16K, MX53_INT_GPIO6_LOW, MX53_INT_GPIO6_HIGH);
+	mxc_register_gpio("imx31-gpio", 6, MX53_GPIO7_BASE_ADDR, SZ_16K, MX53_INT_GPIO7_LOW, MX53_INT_GPIO7_HIGH);
 }

arch/arm/mach-mxs/Makefile

@@ -1,5 +1,5 @@
 # Common support
-obj-y := clock.o devices.o gpio.o icoll.o iomux.o system.o timer.o
+obj-y := clock.o devices.o icoll.o iomux.o system.o timer.o
 
 obj-$(CONFIG_MXS_OCOTP) += ocotp.o
 obj-$(CONFIG_PM) += pm.o

arch/arm/mach-mxs/devices.c

@@ -88,3 +88,14 @@ int __init mxs_add_amba_device(const struct amba_device *dev)
 
 	return amba_device_register(adev, &iomem_resource);
 }
+
+struct device mxs_apbh_bus = {
+	.init_name	= "mxs_apbh",
+	.parent         = &platform_bus,
+};
+
+static int __init mxs_device_init(void)
+{
+	return device_register(&mxs_apbh_bus);
+}
+core_initcall(mxs_device_init);

arch/arm/mach-mxs/devices/Makefile

@@ -6,4 +6,5 @@ obj-$(CONFIG_MXS_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o
 obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_I2C) += platform-mxs-i2c.o
 obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_MMC) += platform-mxs-mmc.o
 obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_PWM) += platform-mxs-pwm.o
+obj-y += platform-gpio-mxs.o
 obj-$(CONFIG_MXS_HAVE_PLATFORM_MXSFB) += platform-mxsfb.o

arch/arm/mach-mxs/devices/platform-gpio-mxs.c

@@ -0,0 +1,53 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <linux/compiler.h>
+#include <linux/err.h>
+#include <linux/init.h>
+
+#include <mach/mx23.h>
+#include <mach/mx28.h>
+#include <mach/devices-common.h>
+
+struct platform_device *__init mxs_add_gpio(
+	int id, resource_size_t iobase, int irq)
+{
+	struct resource res[] = {
+		{
+			.start = iobase,
+			.end = iobase + SZ_8K - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = irq,
+			.end = irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return platform_device_register_resndata(&mxs_apbh_bus,
+			"gpio-mxs", id, res, ARRAY_SIZE(res), NULL, 0);
+}
+
+static int __init mxs_add_mxs_gpio(void)
+{
+	if (cpu_is_mx23()) {
+		mxs_add_gpio(0, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO0);
+		mxs_add_gpio(1, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO1);
+		mxs_add_gpio(2, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO2);
+	}
+
+	if (cpu_is_mx28()) {
+		mxs_add_gpio(0, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO0);
+		mxs_add_gpio(1, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO1);
+		mxs_add_gpio(2, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO2);
+		mxs_add_gpio(3, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO3);
+		mxs_add_gpio(4, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO4);
+	}
+
+	return 0;
+}
+postcore_initcall(mxs_add_mxs_gpio);

arch/arm/mach-mxs/gpio.c

@@ -1,331 +0,0 @@
-/*
- * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de>
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * Based on code from Freescale,
- * Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA  02110-1301, USA.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <asm-generic/bug.h>
-
-#include "gpio.h"
-
-static struct mxs_gpio_port *mxs_gpio_ports;
-static int gpio_table_size;
-
-#define PINCTRL_DOUT(n)		((cpu_is_mx23() ? 0x0500 : 0x0700) + (n) * 0x10)
-#define PINCTRL_DIN(n)		((cpu_is_mx23() ? 0x0600 : 0x0900) + (n) * 0x10)
-#define PINCTRL_DOE(n)		((cpu_is_mx23() ? 0x0700 : 0x0b00) + (n) * 0x10)
-#define PINCTRL_PIN2IRQ(n)	((cpu_is_mx23() ? 0x0800 : 0x1000) + (n) * 0x10)
-#define PINCTRL_IRQEN(n)	((cpu_is_mx23() ? 0x0900 : 0x1100) + (n) * 0x10)
-#define PINCTRL_IRQLEV(n)	((cpu_is_mx23() ? 0x0a00 : 0x1200) + (n) * 0x10)
-#define PINCTRL_IRQPOL(n)	((cpu_is_mx23() ? 0x0b00 : 0x1300) + (n) * 0x10)
-#define PINCTRL_IRQSTAT(n)	((cpu_is_mx23() ? 0x0c00 : 0x1400) + (n) * 0x10)
-
-#define GPIO_INT_FALL_EDGE	0x0
-#define GPIO_INT_LOW_LEV	0x1
-#define GPIO_INT_RISE_EDGE	0x2
-#define GPIO_INT_HIGH_LEV	0x3
-#define GPIO_INT_LEV_MASK	(1 << 0)
-#define GPIO_INT_POL_MASK	(1 << 1)
-
-/* Note: This driver assumes 32 GPIOs are handled in one register */
-
-static void clear_gpio_irqstatus(struct mxs_gpio_port *port, u32 index)
-{
-	__mxs_clrl(1 << index, port->base + PINCTRL_IRQSTAT(port->id));
-}
-
-static void set_gpio_irqenable(struct mxs_gpio_port *port, u32 index,
-				int enable)
-{
-	if (enable) {
-		__mxs_setl(1 << index, port->base + PINCTRL_IRQEN(port->id));
-		__mxs_setl(1 << index, port->base + PINCTRL_PIN2IRQ(port->id));
-	} else {
-		__mxs_clrl(1 << index, port->base + PINCTRL_IRQEN(port->id));
-	}
-}
-
-static void mxs_gpio_ack_irq(struct irq_data *d)
-{
-	u32 gpio = irq_to_gpio(d->irq);
-	clear_gpio_irqstatus(&mxs_gpio_ports[gpio / 32], gpio & 0x1f);
-}
-
-static void mxs_gpio_mask_irq(struct irq_data *d)
-{
-	u32 gpio = irq_to_gpio(d->irq);
-	set_gpio_irqenable(&mxs_gpio_ports[gpio / 32], gpio & 0x1f, 0);
-}
-
-static void mxs_gpio_unmask_irq(struct irq_data *d)
-{
-	u32 gpio = irq_to_gpio(d->irq);
-	set_gpio_irqenable(&mxs_gpio_ports[gpio / 32], gpio & 0x1f, 1);
-}
-
-static int mxs_gpio_get(struct gpio_chip *chip, unsigned offset);
-
-static int mxs_gpio_set_irq_type(struct irq_data *d, unsigned int type)
-{
-	u32 gpio = irq_to_gpio(d->irq);
-	u32 pin_mask = 1 << (gpio & 31);
-	struct mxs_gpio_port *port = &mxs_gpio_ports[gpio / 32];
-	void __iomem *pin_addr;
-	int edge;
-
-	switch (type) {
-	case IRQ_TYPE_EDGE_RISING:
-		edge = GPIO_INT_RISE_EDGE;
-		break;
-	case IRQ_TYPE_EDGE_FALLING:
-		edge = GPIO_INT_FALL_EDGE;
-		break;
-	case IRQ_TYPE_LEVEL_LOW:
-		edge = GPIO_INT_LOW_LEV;
-		break;
-	case IRQ_TYPE_LEVEL_HIGH:
-		edge = GPIO_INT_HIGH_LEV;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	/* set level or edge */
-	pin_addr = port->base + PINCTRL_IRQLEV(port->id);
-	if (edge & GPIO_INT_LEV_MASK)
-		__mxs_setl(pin_mask, pin_addr);
-	else
-		__mxs_clrl(pin_mask, pin_addr);
-
-	/* set polarity */
-	pin_addr = port->base + PINCTRL_IRQPOL(port->id);
-	if (edge & GPIO_INT_POL_MASK)
-		__mxs_setl(pin_mask, pin_addr);
-	else
-		__mxs_clrl(pin_mask, pin_addr);
-
-	clear_gpio_irqstatus(port, gpio & 0x1f);
-
-	return 0;
-}
-
-/* MXS has one interrupt *per* gpio port */
-static void mxs_gpio_irq_handler(u32 irq, struct irq_desc *desc)
-{
-	u32 irq_stat;
-	struct mxs_gpio_port *port = (struct mxs_gpio_port *)irq_get_handler_data(irq);
-	u32 gpio_irq_no_base = port->virtual_irq_start;
-
-	desc->irq_data.chip->irq_ack(&desc->irq_data);
-
-	irq_stat = __raw_readl(port->base + PINCTRL_IRQSTAT(port->id)) &
-			__raw_readl(port->base + PINCTRL_IRQEN(port->id));
-
-	while (irq_stat != 0) {
-		int irqoffset = fls(irq_stat) - 1;
-		generic_handle_irq(gpio_irq_no_base + irqoffset);
-		irq_stat &= ~(1 << irqoffset);
-	}
-}
-
-/*
- * Set interrupt number "irq" in the GPIO as a wake-up source.
- * While system is running, all registered GPIO interrupts need to have
- * wake-up enabled. When system is suspended, only selected GPIO interrupts
- * need to have wake-up enabled.
- * @param  irq          interrupt source number
- * @param  enable       enable as wake-up if equal to non-zero
- * @return       This function returns 0 on success.
- */
-static int mxs_gpio_set_wake_irq(struct irq_data *d, unsigned int enable)
-{
-	u32 gpio = irq_to_gpio(d->irq);
-	u32 gpio_idx = gpio & 0x1f;
-	struct mxs_gpio_port *port = &mxs_gpio_ports[gpio / 32];
-
-	if (enable) {
-		if (port->irq_high && (gpio_idx >= 16))
-			enable_irq_wake(port->irq_high);
-		else
-			enable_irq_wake(port->irq);
-	} else {
-		if (port->irq_high && (gpio_idx >= 16))
-			disable_irq_wake(port->irq_high);
-		else
-			disable_irq_wake(port->irq);
-	}
-
-	return 0;
-}
-
-static struct irq_chip gpio_irq_chip = {
-	.name = "mxs gpio",
-	.irq_ack = mxs_gpio_ack_irq,
-	.irq_mask = mxs_gpio_mask_irq,
-	.irq_unmask = mxs_gpio_unmask_irq,
-	.irq_set_type = mxs_gpio_set_irq_type,
-	.irq_set_wake = mxs_gpio_set_wake_irq,
-};
-
-static void mxs_set_gpio_direction(struct gpio_chip *chip, unsigned offset,
-				int dir)
-{
-	struct mxs_gpio_port *port =
-		container_of(chip, struct mxs_gpio_port, chip);
-	void __iomem *pin_addr = port->base + PINCTRL_DOE(port->id);
-
-	if (dir)
-		__mxs_setl(1 << offset, pin_addr);
-	else
-		__mxs_clrl(1 << offset, pin_addr);
-}
-
-static int mxs_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
-	struct mxs_gpio_port *port =
-		container_of(chip, struct mxs_gpio_port, chip);
-
-	return (__raw_readl(port->base + PINCTRL_DIN(port->id)) >> offset) & 1;
-}
-
-static void mxs_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
-	struct mxs_gpio_port *port =
-		container_of(chip, struct mxs_gpio_port, chip);
-	void __iomem *pin_addr = port->base + PINCTRL_DOUT(port->id);
-
-	if (value)
-		__mxs_setl(1 << offset, pin_addr);
-	else
-		__mxs_clrl(1 << offset, pin_addr);
-}
-
-static int mxs_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
-{
-	struct mxs_gpio_port *port =
-		container_of(chip, struct mxs_gpio_port, chip);
-
-	return port->virtual_irq_start + offset;
-}
-
-static int mxs_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-{
-	mxs_set_gpio_direction(chip, offset, 0);
-	return 0;
-}
-
-static int mxs_gpio_direction_output(struct gpio_chip *chip,
-				     unsigned offset, int value)
-{
-	mxs_gpio_set(chip, offset, value);
-	mxs_set_gpio_direction(chip, offset, 1);
-	return 0;
-}
-
-int __init mxs_gpio_init(struct mxs_gpio_port *port, int cnt)
-{
-	int i, j;
-
-	/* save for local usage */
-	mxs_gpio_ports = port;
-	gpio_table_size = cnt;
-
-	pr_info("MXS GPIO hardware\n");
-
-	for (i = 0; i < cnt; i++) {
-		/* disable the interrupt and clear the status */
-		__raw_writel(0, port[i].base + PINCTRL_PIN2IRQ(i));
-		__raw_writel(0, port[i].base + PINCTRL_IRQEN(i));
-
-		/* clear address has to be used to clear IRQSTAT bits */
-		__mxs_clrl(~0U, port[i].base + PINCTRL_IRQSTAT(i));
-
-		for (j = port[i].virtual_irq_start;
-			j < port[i].virtual_irq_start + 32; j++) {
-			irq_set_chip_and_handler(j, &gpio_irq_chip,
-						 handle_level_irq);
-			set_irq_flags(j, IRQF_VALID);
-		}
-
-		/* setup one handler for each entry */
-		irq_set_chained_handler(port[i].irq, mxs_gpio_irq_handler);
-		irq_set_handler_data(port[i].irq, &port[i]);
-
-		/* register gpio chip */
-		port[i].chip.direction_input = mxs_gpio_direction_input;
-		port[i].chip.direction_output = mxs_gpio_direction_output;
-		port[i].chip.get = mxs_gpio_get;
-		port[i].chip.set = mxs_gpio_set;
-		port[i].chip.to_irq = mxs_gpio_to_irq;
-		port[i].chip.base = i * 32;
-		port[i].chip.ngpio = 32;
-
-		/* its a serious configuration bug when it fails */
-		BUG_ON(gpiochip_add(&port[i].chip) < 0);
-	}
-
-	return 0;
-}
-
-#define MX23_GPIO_BASE	MX23_IO_ADDRESS(MX23_PINCTRL_BASE_ADDR)
-#define MX28_GPIO_BASE	MX28_IO_ADDRESS(MX28_PINCTRL_BASE_ADDR)
-
-#define DEFINE_MXS_GPIO_PORT(_base, _irq, _id)				\
-	{								\
-		.chip.label = "gpio-" #_id,				\
-		.id = _id,						\
-		.irq = _irq,						\
-		.base = _base,						\
-		.virtual_irq_start = MXS_GPIO_IRQ_START + (_id) * 32,	\
-	}
-
-#ifdef CONFIG_SOC_IMX23
-static struct mxs_gpio_port mx23_gpio_ports[] = {
-	DEFINE_MXS_GPIO_PORT(MX23_GPIO_BASE, MX23_INT_GPIO0, 0),
-	DEFINE_MXS_GPIO_PORT(MX23_GPIO_BASE, MX23_INT_GPIO1, 1),
-	DEFINE_MXS_GPIO_PORT(MX23_GPIO_BASE, MX23_INT_GPIO2, 2),
-};
-
-int __init mx23_register_gpios(void)
-{
-	return mxs_gpio_init(mx23_gpio_ports, ARRAY_SIZE(mx23_gpio_ports));
-}
-#endif
-
-#ifdef CONFIG_SOC_IMX28
-static struct mxs_gpio_port mx28_gpio_ports[] = {
-	DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO0, 0),
-	DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO1, 1),
-	DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO2, 2),
-	DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO3, 3),
-	DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO4, 4),
-};
-
-int __init mx28_register_gpios(void)
-{
-	return mxs_gpio_init(mx28_gpio_ports, ARRAY_SIZE(mx28_gpio_ports));
-}
-#endif

arch/arm/mach-mxs/gpio.h

@@ -1,34 +0,0 @@
-/*
- * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA  02110-1301, USA.
- */
-
-#ifndef __MXS_GPIO_H__
-#define __MXS_GPIO_H__
-
-struct mxs_gpio_port {
-	void __iomem *base;
-	int id;
-	int irq;
-	int irq_high;
-	int virtual_irq_start;
-	struct gpio_chip chip;
-};
-
-int mxs_gpio_init(struct mxs_gpio_port*, int);
-
-#endif /* __MXS_GPIO_H__ */

arch/arm/mach-mxs/include/mach/devices-common.h

@@ -11,6 +11,8 @@
 #include <linux/init.h>
 #include <linux/amba/bus.h>
 
+extern struct device mxs_apbh_bus;
+
 struct platform_device *mxs_add_platform_device_dmamask(
 		const char *name, int id,
 		const struct resource *res, unsigned int num_resources,

arch/arm/mach-mxs/mach-mx28evk.c

@@ -26,7 +26,6 @@
 #include <mach/iomux-mx28.h>
 
 #include "devices-mx28.h"
-#include "gpio.h"
 
 #define MX28EVK_FLEXCAN_SWITCH	MXS_GPIO_NR(2, 13)
 #define MX28EVK_FEC_PHY_POWER	MXS_GPIO_NR(2, 15)

arch/arm/mach-mxs/mm-mx23.c

@@ -41,5 +41,4 @@ void __init mx23_map_io(void)
 void __init mx23_init_irq(void)
 {
 	icoll_init_irq();
-	mx23_register_gpios();
 }

arch/arm/mach-mxs/mm-mx28.c

@@ -41,5 +41,4 @@ void __init mx28_map_io(void)
 void __init mx28_init_irq(void)
 {
 	icoll_init_irq();
-	mx28_register_gpios();
 }

arch/arm/mach-omap1/gpio15xx.c

@@ -34,11 +34,22 @@ static struct __initdata resource omap15xx_mpu_gpio_resources[] = {
 	},
 };
 
+static struct omap_gpio_reg_offs omap15xx_mpuio_regs = {
+	.revision       = USHRT_MAX,
+	.direction	= OMAP_MPUIO_IO_CNTL,
+	.datain		= OMAP_MPUIO_INPUT_LATCH,
+	.dataout	= OMAP_MPUIO_OUTPUT,
+	.irqstatus	= OMAP_MPUIO_GPIO_INT,
+	.irqenable	= OMAP_MPUIO_GPIO_MASKIT,
+	.irqenable_inv	= true,
+};
+
 static struct __initdata omap_gpio_platform_data omap15xx_mpu_gpio_config = {
 	.virtual_irq_start	= IH_MPUIO_BASE,
 	.bank_type		= METHOD_MPUIO,
 	.bank_width		= 16,
 	.bank_stride		= 1,
+	.regs			= &omap15xx_mpuio_regs,
 };
 
 static struct platform_device omap15xx_mpu_gpio = {
@@ -64,10 +75,21 @@ static struct __initdata resource omap15xx_gpio_resources[] = {
 	},
 };
 
+static struct omap_gpio_reg_offs omap15xx_gpio_regs = {
+	.revision	= USHRT_MAX,
+	.direction	= OMAP1510_GPIO_DIR_CONTROL,
+	.datain		= OMAP1510_GPIO_DATA_INPUT,
+	.dataout	= OMAP1510_GPIO_DATA_OUTPUT,
+	.irqstatus	= OMAP1510_GPIO_INT_STATUS,
+	.irqenable	= OMAP1510_GPIO_INT_MASK,
+	.irqenable_inv	= true,
+};
+
 static struct __initdata omap_gpio_platform_data omap15xx_gpio_config = {
 	.virtual_irq_start	= IH_GPIO_BASE,
 	.bank_type		= METHOD_GPIO_1510,
 	.bank_width		= 16,
+	.regs                   = &omap15xx_gpio_regs,
 };
 
 static struct platform_device omap15xx_gpio = {

arch/arm/mach-omap1/gpio16xx.c

@@ -37,11 +37,22 @@ static struct __initdata resource omap16xx_mpu_gpio_resources[] = {
 	},
 };
 
+static struct omap_gpio_reg_offs omap16xx_mpuio_regs = {
+	.revision       = USHRT_MAX,
+	.direction	= OMAP_MPUIO_IO_CNTL,
+	.datain		= OMAP_MPUIO_INPUT_LATCH,
+	.dataout	= OMAP_MPUIO_OUTPUT,
+	.irqstatus	= OMAP_MPUIO_GPIO_INT,
+	.irqenable	= OMAP_MPUIO_GPIO_MASKIT,
+	.irqenable_inv	= true,
+};
+
 static struct __initdata omap_gpio_platform_data omap16xx_mpu_gpio_config = {
 	.virtual_irq_start	= IH_MPUIO_BASE,
 	.bank_type		= METHOD_MPUIO,
 	.bank_width		= 16,
 	.bank_stride		= 1,
+	.regs                   = &omap16xx_mpuio_regs,
 };
 
 static struct platform_device omap16xx_mpu_gpio = {
@@ -67,10 +78,24 @@ static struct __initdata resource omap16xx_gpio1_resources[] = {
 	},
 };
 
+static struct omap_gpio_reg_offs omap16xx_gpio_regs = {
+	.revision       = OMAP1610_GPIO_REVISION,
+	.direction	= OMAP1610_GPIO_DIRECTION,
+	.set_dataout	= OMAP1610_GPIO_SET_DATAOUT,
+	.clr_dataout	= OMAP1610_GPIO_CLEAR_DATAOUT,
+	.datain		= OMAP1610_GPIO_DATAIN,
+	.dataout	= OMAP1610_GPIO_DATAOUT,
+	.irqstatus	= OMAP1610_GPIO_IRQSTATUS1,
+	.irqenable	= OMAP1610_GPIO_IRQENABLE1,
+	.set_irqenable	= OMAP1610_GPIO_SET_IRQENABLE1,
+	.clr_irqenable	= OMAP1610_GPIO_CLEAR_IRQENABLE1,
+};
+
 static struct __initdata omap_gpio_platform_data omap16xx_gpio1_config = {
 	.virtual_irq_start	= IH_GPIO_BASE,
 	.bank_type		= METHOD_GPIO_1610,
 	.bank_width		= 16,
+	.regs                   = &omap16xx_gpio_regs,
 };
 
 static struct platform_device omap16xx_gpio1 = {
@@ -100,6 +125,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio2_config = {
 	.virtual_irq_start	= IH_GPIO_BASE + 16,
 	.bank_type		= METHOD_GPIO_1610,
 	.bank_width		= 16,
+	.regs                   = &omap16xx_gpio_regs,
 };
 
 static struct platform_device omap16xx_gpio2 = {
@@ -129,6 +155,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio3_config = {
 	.virtual_irq_start	= IH_GPIO_BASE + 32,
 	.bank_type		= METHOD_GPIO_1610,
 	.bank_width		= 16,
+	.regs                   = &omap16xx_gpio_regs,
 };
 
 static struct platform_device omap16xx_gpio3 = {
@@ -158,6 +185,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio4_config = {
 	.virtual_irq_start	= IH_GPIO_BASE + 48,
 	.bank_type		= METHOD_GPIO_1610,
 	.bank_width		= 16,
+	.regs                   = &omap16xx_gpio_regs,
 };
 
 static struct platform_device omap16xx_gpio4 = {

arch/arm/mach-omap1/gpio7xx.c

@@ -39,11 +39,22 @@ static struct __initdata resource omap7xx_mpu_gpio_resources[] = {
 	},
 };
 
+static struct omap_gpio_reg_offs omap7xx_mpuio_regs = {
+	.revision	= USHRT_MAX,
+	.direction	= OMAP_MPUIO_IO_CNTL / 2,
+	.datain		= OMAP_MPUIO_INPUT_LATCH / 2,
+	.dataout	= OMAP_MPUIO_OUTPUT / 2,
+	.irqstatus	= OMAP_MPUIO_GPIO_INT / 2,
+	.irqenable	= OMAP_MPUIO_GPIO_MASKIT / 2,
+	.irqenable_inv	= true,
+};
+
 static struct __initdata omap_gpio_platform_data omap7xx_mpu_gpio_config = {
 	.virtual_irq_start	= IH_MPUIO_BASE,
 	.bank_type		= METHOD_MPUIO,
 	.bank_width		= 32,
 	.bank_stride		= 2,
+	.regs                   = &omap7xx_mpuio_regs,
 };
 
 static struct platform_device omap7xx_mpu_gpio = {
@@ -69,10 +80,21 @@ static struct __initdata resource omap7xx_gpio1_resources[] = {
 	},
 };
 
+static struct omap_gpio_reg_offs omap7xx_gpio_regs = {
+	.revision	= USHRT_MAX,
+	.direction	= OMAP7XX_GPIO_DIR_CONTROL,
+	.datain		= OMAP7XX_GPIO_DATA_INPUT,
+	.dataout	= OMAP7XX_GPIO_DATA_OUTPUT,
+	.irqstatus	= OMAP7XX_GPIO_INT_STATUS,
+	.irqenable	= OMAP7XX_GPIO_INT_MASK,
+	.irqenable_inv	= true,
+};
+
 static struct __initdata omap_gpio_platform_data omap7xx_gpio1_config = {
 	.virtual_irq_start	= IH_GPIO_BASE,
 	.bank_type		= METHOD_GPIO_7XX,
 	.bank_width		= 32,
+	.regs			= &omap7xx_gpio_regs,
 };
 
 static struct platform_device omap7xx_gpio1 = {
@@ -102,6 +124,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio2_config = {
 	.virtual_irq_start	= IH_GPIO_BASE + 32,
 	.bank_type		= METHOD_GPIO_7XX,
 	.bank_width		= 32,
+	.regs			= &omap7xx_gpio_regs,
 };
 
 static struct platform_device omap7xx_gpio2 = {
@@ -131,6 +154,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio3_config = {
 	.virtual_irq_start	= IH_GPIO_BASE + 64,
 	.bank_type		= METHOD_GPIO_7XX,
 	.bank_width		= 32,
+	.regs			= &omap7xx_gpio_regs,
 };
 
 static struct platform_device omap7xx_gpio3 = {
@@ -160,6 +184,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio4_config = {
 	.virtual_irq_start	= IH_GPIO_BASE + 96,
 	.bank_type		= METHOD_GPIO_7XX,
 	.bank_width		= 32,
+	.regs			= &omap7xx_gpio_regs,
 };
 
 static struct platform_device omap7xx_gpio4 = {
@@ -189,6 +214,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio5_config = {
 	.virtual_irq_start	= IH_GPIO_BASE + 128,
 	.bank_type		= METHOD_GPIO_7XX,
 	.bank_width		= 32,
+	.regs			= &omap7xx_gpio_regs,
 };
 
 static struct platform_device omap7xx_gpio5 = {
@@ -218,6 +244,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio6_config = {
 	.virtual_irq_start	= IH_GPIO_BASE + 160,
 	.bank_type		= METHOD_GPIO_7XX,
 	.bank_width		= 32,
+	.regs			= &omap7xx_gpio_regs,
 };
 
 static struct platform_device omap7xx_gpio6 = {

arch/arm/mach-omap2/gpio.c

@@ -61,13 +61,45 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
 	pdata->dbck_flag = dev_attr->dbck_flag;
 	pdata->virtual_irq_start = IH_GPIO_BASE + 32 * (id - 1);
 
+	pdata->regs = kzalloc(sizeof(struct omap_gpio_reg_offs), GFP_KERNEL);
+	if (!pdata) {
+		pr_err("gpio%d: Memory allocation failed\n", id);
+		return -ENOMEM;
+	}
+
 	switch (oh->class->rev) {
 	case 0:
 	case 1:
 		pdata->bank_type = METHOD_GPIO_24XX;
+		pdata->regs->revision = OMAP24XX_GPIO_REVISION;
+		pdata->regs->direction = OMAP24XX_GPIO_OE;
+		pdata->regs->datain = OMAP24XX_GPIO_DATAIN;
+		pdata->regs->dataout = OMAP24XX_GPIO_DATAOUT;
+		pdata->regs->set_dataout = OMAP24XX_GPIO_SETDATAOUT;
+		pdata->regs->clr_dataout = OMAP24XX_GPIO_CLEARDATAOUT;
+		pdata->regs->irqstatus = OMAP24XX_GPIO_IRQSTATUS1;
+		pdata->regs->irqstatus2 = OMAP24XX_GPIO_IRQSTATUS2;
+		pdata->regs->irqenable = OMAP24XX_GPIO_IRQENABLE1;
+		pdata->regs->set_irqenable = OMAP24XX_GPIO_SETIRQENABLE1;
+		pdata->regs->clr_irqenable = OMAP24XX_GPIO_CLEARIRQENABLE1;
+		pdata->regs->debounce = OMAP24XX_GPIO_DEBOUNCE_VAL;
+		pdata->regs->debounce_en = OMAP24XX_GPIO_DEBOUNCE_EN;
 		break;
 	case 2:
 		pdata->bank_type = METHOD_GPIO_44XX;
+		pdata->regs->revision = OMAP4_GPIO_REVISION;
+		pdata->regs->direction = OMAP4_GPIO_OE;
+		pdata->regs->datain = OMAP4_GPIO_DATAIN;
+		pdata->regs->dataout = OMAP4_GPIO_DATAOUT;
+		pdata->regs->set_dataout = OMAP4_GPIO_SETDATAOUT;
+		pdata->regs->clr_dataout = OMAP4_GPIO_CLEARDATAOUT;
+		pdata->regs->irqstatus = OMAP4_GPIO_IRQSTATUS0;
+		pdata->regs->irqstatus2 = OMAP4_GPIO_IRQSTATUS1;
+		pdata->regs->irqenable = OMAP4_GPIO_IRQSTATUSSET0;
+		pdata->regs->set_irqenable = OMAP4_GPIO_IRQSTATUSSET0;
+		pdata->regs->clr_irqenable = OMAP4_GPIO_IRQSTATUSCLR0;
+		pdata->regs->debounce = OMAP4_GPIO_DEBOUNCINGTIME;
+		pdata->regs->debounce_en = OMAP4_GPIO_DEBOUNCENABLE;
 		break;
 	default:
 		WARN(1, "Invalid gpio bank_type\n");

arch/arm/mach-tegra/Makefile

@@ -4,7 +4,6 @@ obj-y                                   += io.o
 obj-y                                   += irq.o
 obj-y                                   += clock.o
 obj-y                                   += timer.o
-obj-y                                   += gpio.o
 obj-y                                   += pinmux.o
 obj-y                                   += powergate.o
 obj-y					+= fuse.o

arch/arm/plat-mxc/Makefile

@@ -3,7 +3,7 @@
 #
 
 # Common support
-obj-y := clock.o gpio.o time.o devices.o cpu.o system.o irq-common.o
+obj-y := clock.o time.o devices.o cpu.o system.o irq-common.o
 
 # MX51 uses the TZIC interrupt controller, older platforms use AVIC
 obj-$(CONFIG_MXC_TZIC) += tzic.o

arch/arm/plat-mxc/devices.c

@@ -89,3 +89,14 @@ err:
 
 	return pdev;
 }
+
+struct device mxc_aips_bus = {
+	.init_name	= "mxc_aips",
+	.parent		= &platform_bus,
+};
+
+static int __init mxc_device_init(void)
+{
+	return device_register(&mxc_aips_bus);
+}
+core_initcall(mxc_device_init);

arch/arm/plat-mxc/devices/Makefile

@@ -2,6 +2,7 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_FEC) += platform-fec.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_FSL_USB2_UDC) += platform-fsl-usb2-udc.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_GPIO_KEYS) += platform-gpio_keys.o
+obj-y += platform-gpio-mxc.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX21_HCD) += platform-imx21-hcd.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX2_WDT) += platform-imx2-wdt.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_IMXDI_RTC) += platform-imxdi_rtc.o

arch/arm/plat-mxc/devices/platform-gpio-mxc.c

@@ -0,0 +1,32 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2011 Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/devices-common.h>
+
+struct platform_device *__init mxc_register_gpio(char *name, int id,
+	resource_size_t iobase, resource_size_t iosize, int irq, int irq_high)
+{
+	struct resource res[] = {
+		{
+			.start = iobase,
+			.end = iobase + iosize - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = irq,
+			.end = irq,
+			.flags = IORESOURCE_IRQ,
+		}, {
+			.start = irq_high,
+			.end = irq_high,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return platform_device_register_resndata(&mxc_aips_bus,
+			name, id, res, ARRAY_SIZE(res), NULL, 0);
+}

arch/arm/plat-mxc/gpio.c

@@ -1,361 +0,0 @@
-/*
- * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de>
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * Based on code from Freescale,
- * Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-#include <mach/hardware.h>
-#include <asm-generic/bug.h>
-
-static struct mxc_gpio_port *mxc_gpio_ports;
-static int gpio_table_size;
-
-#define cpu_is_mx1_mx2()	(cpu_is_mx1() || cpu_is_mx2())
-
-#define GPIO_DR		(cpu_is_mx1_mx2() ? 0x1c : 0x00)
-#define GPIO_GDIR	(cpu_is_mx1_mx2() ? 0x00 : 0x04)
-#define GPIO_PSR	(cpu_is_mx1_mx2() ? 0x24 : 0x08)
-#define GPIO_ICR1	(cpu_is_mx1_mx2() ? 0x28 : 0x0C)
-#define GPIO_ICR2	(cpu_is_mx1_mx2() ? 0x2C : 0x10)
-#define GPIO_IMR	(cpu_is_mx1_mx2() ? 0x30 : 0x14)
-#define GPIO_ISR	(cpu_is_mx1_mx2() ? 0x34 : 0x18)
-
-#define GPIO_INT_LOW_LEV	(cpu_is_mx1_mx2() ? 0x3 : 0x0)
-#define GPIO_INT_HIGH_LEV	(cpu_is_mx1_mx2() ? 0x2 : 0x1)
-#define GPIO_INT_RISE_EDGE	(cpu_is_mx1_mx2() ? 0x0 : 0x2)
-#define GPIO_INT_FALL_EDGE	(cpu_is_mx1_mx2() ? 0x1 : 0x3)
-#define GPIO_INT_NONE		0x4
-
-/* Note: This driver assumes 32 GPIOs are handled in one register */
-
-static void _clear_gpio_irqstatus(struct mxc_gpio_port *port, u32 index)
-{
-	__raw_writel(1 << index, port->base + GPIO_ISR);
-}
-
-static void _set_gpio_irqenable(struct mxc_gpio_port *port, u32 index,
-				int enable)
-{
-	u32 l;
-
-	l = __raw_readl(port->base + GPIO_IMR);
-	l = (l & (~(1 << index))) | (!!enable << index);
-	__raw_writel(l, port->base + GPIO_IMR);
-}
-
-static void gpio_ack_irq(struct irq_data *d)
-{
-	u32 gpio = irq_to_gpio(d->irq);
-	_clear_gpio_irqstatus(&mxc_gpio_ports[gpio / 32], gpio & 0x1f);
-}
-
-static void gpio_mask_irq(struct irq_data *d)
-{
-	u32 gpio = irq_to_gpio(d->irq);
-	_set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 0);
-}
-
-static void gpio_unmask_irq(struct irq_data *d)
-{
-	u32 gpio = irq_to_gpio(d->irq);
-	_set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 1);
-}
-
-static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset);
-
-static int gpio_set_irq_type(struct irq_data *d, u32 type)
-{
-	u32 gpio = irq_to_gpio(d->irq);
-	struct mxc_gpio_port *port = &mxc_gpio_ports[gpio / 32];
-	u32 bit, val;
-	int edge;
-	void __iomem *reg = port->base;
-
-	port->both_edges &= ~(1 << (gpio & 31));
-	switch (type) {
-	case IRQ_TYPE_EDGE_RISING:
-		edge = GPIO_INT_RISE_EDGE;
-		break;
-	case IRQ_TYPE_EDGE_FALLING:
-		edge = GPIO_INT_FALL_EDGE;
-		break;
-	case IRQ_TYPE_EDGE_BOTH:
-		val = mxc_gpio_get(&port->chip, gpio & 31);
-		if (val) {
-			edge = GPIO_INT_LOW_LEV;
-			pr_debug("mxc: set GPIO %d to low trigger\n", gpio);
-		} else {
-			edge = GPIO_INT_HIGH_LEV;
-			pr_debug("mxc: set GPIO %d to high trigger\n", gpio);
-		}
-		port->both_edges |= 1 << (gpio & 31);
-		break;
-	case IRQ_TYPE_LEVEL_LOW:
-		edge = GPIO_INT_LOW_LEV;
-		break;
-	case IRQ_TYPE_LEVEL_HIGH:
-		edge = GPIO_INT_HIGH_LEV;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
-	bit = gpio & 0xf;
-	val = __raw_readl(reg) & ~(0x3 << (bit << 1));
-	__raw_writel(val | (edge << (bit << 1)), reg);
-	_clear_gpio_irqstatus(port, gpio & 0x1f);
-
-	return 0;
-}
-
-static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio)
-{
-	void __iomem *reg = port->base;
-	u32 bit, val;
-	int edge;
-
-	reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
-	bit = gpio & 0xf;
-	val = __raw_readl(reg);
-	edge = (val >> (bit << 1)) & 3;
-	val &= ~(0x3 << (bit << 1));
-	if (edge == GPIO_INT_HIGH_LEV) {
-		edge = GPIO_INT_LOW_LEV;
-		pr_debug("mxc: switch GPIO %d to low trigger\n", gpio);
-	} else if (edge == GPIO_INT_LOW_LEV) {
-		edge = GPIO_INT_HIGH_LEV;
-		pr_debug("mxc: switch GPIO %d to high trigger\n", gpio);
-	} else {
-		pr_err("mxc: invalid configuration for GPIO %d: %x\n",
-		       gpio, edge);
-		return;
-	}
-	__raw_writel(val | (edge << (bit << 1)), reg);
-}
-
-/* handle 32 interrupts in one status register */
-static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
-{
-	u32 gpio_irq_no_base = port->virtual_irq_start;
-
-	while (irq_stat != 0) {
-		int irqoffset = fls(irq_stat) - 1;
-
-		if (port->both_edges & (1 << irqoffset))
-			mxc_flip_edge(port, irqoffset);
-
-		generic_handle_irq(gpio_irq_no_base + irqoffset);
-
-		irq_stat &= ~(1 << irqoffset);
-	}
-}
-
-/* MX1 and MX3 has one interrupt *per* gpio port */
-static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc)
-{
-	u32 irq_stat;
-	struct mxc_gpio_port *port = irq_get_handler_data(irq);
-
-	irq_stat = __raw_readl(port->base + GPIO_ISR) &
-			__raw_readl(port->base + GPIO_IMR);
-
-	mxc_gpio_irq_handler(port, irq_stat);
-}
-
-/* MX2 has one interrupt *for all* gpio ports */
-static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc)
-{
-	int i;
-	u32 irq_msk, irq_stat;
-	struct mxc_gpio_port *port = irq_get_handler_data(irq);
-
-	/* walk through all interrupt status registers */
-	for (i = 0; i < gpio_table_size; i++) {
-		irq_msk = __raw_readl(port[i].base + GPIO_IMR);
-		if (!irq_msk)
-			continue;
-
-		irq_stat = __raw_readl(port[i].base + GPIO_ISR) & irq_msk;
-		if (irq_stat)
-			mxc_gpio_irq_handler(&port[i], irq_stat);
-	}
-}
-
-/*
- * Set interrupt number "irq" in the GPIO as a wake-up source.
- * While system is running, all registered GPIO interrupts need to have
- * wake-up enabled. When system is suspended, only selected GPIO interrupts
- * need to have wake-up enabled.
- * @param  irq          interrupt source number
- * @param  enable       enable as wake-up if equal to non-zero
- * @return       This function returns 0 on success.
- */
-static int gpio_set_wake_irq(struct irq_data *d, u32 enable)
-{
-	u32 gpio = irq_to_gpio(d->irq);
-	u32 gpio_idx = gpio & 0x1F;
-	struct mxc_gpio_port *port = &mxc_gpio_ports[gpio / 32];
-
-	if (enable) {
-		if (port->irq_high && (gpio_idx >= 16))
-			enable_irq_wake(port->irq_high);
-		else
-			enable_irq_wake(port->irq);
-	} else {
-		if (port->irq_high && (gpio_idx >= 16))
-			disable_irq_wake(port->irq_high);
-		else
-			disable_irq_wake(port->irq);
-	}
-
-	return 0;
-}
-
-static struct irq_chip gpio_irq_chip = {
-	.name = "GPIO",
-	.irq_ack = gpio_ack_irq,
-	.irq_mask = gpio_mask_irq,
-	.irq_unmask = gpio_unmask_irq,
-	.irq_set_type = gpio_set_irq_type,
-	.irq_set_wake = gpio_set_wake_irq,
-};
-
-static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset,
-				int dir)
-{
-	struct mxc_gpio_port *port =
-		container_of(chip, struct mxc_gpio_port, chip);
-	u32 l;
-	unsigned long flags;
-
-	spin_lock_irqsave(&port->lock, flags);
-	l = __raw_readl(port->base + GPIO_GDIR);
-	if (dir)
-		l |= 1 << offset;
-	else
-		l &= ~(1 << offset);
-	__raw_writel(l, port->base + GPIO_GDIR);
-	spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static void mxc_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
-	struct mxc_gpio_port *port =
-		container_of(chip, struct mxc_gpio_port, chip);
-	void __iomem *reg = port->base + GPIO_DR;
-	u32 l;
-	unsigned long flags;
-
-	spin_lock_irqsave(&port->lock, flags);
-	l = (__raw_readl(reg) & (~(1 << offset))) | (!!value << offset);
-	__raw_writel(l, reg);
-	spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
-	struct mxc_gpio_port *port =
-		container_of(chip, struct mxc_gpio_port, chip);
-
-	return (__raw_readl(port->base + GPIO_PSR) >> offset) & 1;
-}
-
-static int mxc_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-{
-	_set_gpio_direction(chip, offset, 0);
-	return 0;
-}
-
-static int mxc_gpio_direction_output(struct gpio_chip *chip,
-				     unsigned offset, int value)
-{
-	mxc_gpio_set(chip, offset, value);
-	_set_gpio_direction(chip, offset, 1);
-	return 0;
-}
-
-/*
- * This lock class tells lockdep that GPIO irqs are in a different
- * category than their parents, so it won't report false recursion.
- */
-static struct lock_class_key gpio_lock_class;
-
-int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt)
-{
-	int i, j;
-
-	/* save for local usage */
-	mxc_gpio_ports = port;
-	gpio_table_size = cnt;
-
-	printk(KERN_INFO "MXC GPIO hardware\n");
-
-	for (i = 0; i < cnt; i++) {
-		/* disable the interrupt and clear the status */
-		__raw_writel(0, port[i].base + GPIO_IMR);
-		__raw_writel(~0, port[i].base + GPIO_ISR);
-		for (j = port[i].virtual_irq_start;
-			j < port[i].virtual_irq_start + 32; j++) {
-			irq_set_lockdep_class(j, &gpio_lock_class);
-			irq_set_chip_and_handler(j, &gpio_irq_chip,
-						 handle_level_irq);
-			set_irq_flags(j, IRQF_VALID);
-		}
-
-		/* register gpio chip */
-		port[i].chip.direction_input = mxc_gpio_direction_input;
-		port[i].chip.direction_output = mxc_gpio_direction_output;
-		port[i].chip.get = mxc_gpio_get;
-		port[i].chip.set = mxc_gpio_set;
-		port[i].chip.base = i * 32;
-		port[i].chip.ngpio = 32;
-
-		spin_lock_init(&port[i].lock);
-
-		/* its a serious configuration bug when it fails */
-		BUG_ON( gpiochip_add(&port[i].chip) < 0 );
-
-		if (cpu_is_mx1() || cpu_is_mx3() || cpu_is_mx25() || cpu_is_mx51()) {
-			/* setup one handler for each entry */
-			irq_set_chained_handler(port[i].irq,
-						mx3_gpio_irq_handler);
-			irq_set_handler_data(port[i].irq, &port[i]);
-			if (port[i].irq_high) {
-				/* setup handler for GPIO 16 to 31 */
-				irq_set_chained_handler(port[i].irq_high,
-							mx3_gpio_irq_handler);
-				irq_set_handler_data(port[i].irq_high,
-						     &port[i]);
-			}
-		}
-	}
-
-	if (cpu_is_mx2()) {
-		/* setup one handler for all GPIO interrupts */
-		irq_set_chained_handler(port[0].irq, mx2_gpio_irq_handler);
-		irq_set_handler_data(port[0].irq, port);
-	}
-
-	return 0;
-}

arch/arm/plat-mxc/include/mach/common.h

@@ -43,6 +43,15 @@ extern void mx35_init_irq(void);
 extern void mx50_init_irq(void);
 extern void mx51_init_irq(void);
 extern void mx53_init_irq(void);
+extern void imx1_soc_init(void);
+extern void imx21_soc_init(void);
+extern void imx25_soc_init(void);
+extern void imx27_soc_init(void);
+extern void imx31_soc_init(void);
+extern void imx35_soc_init(void);
+extern void imx50_soc_init(void);
+extern void imx51_soc_init(void);
+extern void imx53_soc_init(void);
 extern void epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq);
 extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
 extern int mx1_clocks_init(unsigned long fref);
@@ -55,7 +64,8 @@ extern int mx51_clocks_init(unsigned long ckil, unsigned long osc,
 			unsigned long ckih1, unsigned long ckih2);
 extern int mx53_clocks_init(unsigned long ckil, unsigned long osc,
 			unsigned long ckih1, unsigned long ckih2);
-extern int mxc_register_gpios(void);
+extern struct platform_device *mxc_register_gpio(char *name, int id,
+	resource_size_t iobase, resource_size_t iosize, int irq, int irq_high);
 extern int mxc_register_device(struct platform_device *pdev, void *data);
 extern void mxc_set_cpu_type(unsigned int type);
 extern void mxc_arch_reset_init(void __iomem *);

arch/arm/plat-mxc/include/mach/devices-common.h

@@ -10,6 +10,8 @@
 #include <linux/platform_device.h>
 #include <linux/init.h>
 
+extern struct device mxc_aips_bus;
+
 struct platform_device *imx_add_platform_device_dmamask(
 		const char *name, int id,
 		const struct resource *res, unsigned int num_resources,

arch/arm/plat-mxc/include/mach/gpio.h

@@ -36,31 +36,4 @@
 #define gpio_to_irq(gpio)	(MXC_GPIO_IRQ_START + (gpio))
 #define irq_to_gpio(irq)	((irq) - MXC_GPIO_IRQ_START)
 
-struct mxc_gpio_port {
-	void __iomem *base;
-	int irq;
-	int irq_high;
-	int virtual_irq_start;
-	struct gpio_chip chip;
-	u32 both_edges;
-	spinlock_t lock;
-};
-
-#define DEFINE_IMX_GPIO_PORT_IRQ_HIGH(soc, _id, _hwid, _irq, _irq_high)	\
-	{								\
-		.chip.label = "gpio-" #_id,				\
-		.irq = _irq,						\
-		.irq_high = _irq_high,					\
-		.base = soc ## _IO_ADDRESS(				\
-				soc ## _GPIO ## _hwid ## _BASE_ADDR),	\
-		.virtual_irq_start = MXC_GPIO_IRQ_START + (_id) * 32,	\
-	}
-
-#define DEFINE_IMX_GPIO_PORT_IRQ(soc, _id, _hwid, _irq)			\
-	DEFINE_IMX_GPIO_PORT_IRQ_HIGH(soc, _id, _hwid, _irq, 0)
-#define DEFINE_IMX_GPIO_PORT(soc, _id, _hwid)				\
-	DEFINE_IMX_GPIO_PORT_IRQ(soc, _id, _hwid, 0)
-
-int mxc_gpio_init(struct mxc_gpio_port*, int);
-
 #endif

arch/arm/plat-mxc/include/mach/irqs.h

@@ -11,6 +11,8 @@
 #ifndef __ASM_ARCH_MXC_IRQS_H__
 #define __ASM_ARCH_MXC_IRQS_H__
 
+#include <asm-generic/gpio.h>
+
 /*
  * SoCs with TZIC interrupt controller have 128 IRQs, those with AVIC have 64
  */
@@ -22,30 +24,13 @@
 
 #define MXC_GPIO_IRQ_START	MXC_INTERNAL_IRQS
 
-/* these are ordered by size to support multi-SoC kernels */
-#if defined CONFIG_SOC_IMX53
-#define MXC_GPIO_IRQS		(32 * 7)
-#elif defined CONFIG_ARCH_MX2
-#define MXC_GPIO_IRQS		(32 * 6)
-#elif defined CONFIG_SOC_IMX50
-#define MXC_GPIO_IRQS		(32 * 6)
-#elif defined CONFIG_ARCH_MX1
-#define MXC_GPIO_IRQS		(32 * 4)
-#elif defined CONFIG_ARCH_MX25
-#define MXC_GPIO_IRQS		(32 * 4)
-#elif defined CONFIG_SOC_IMX51
-#define MXC_GPIO_IRQS		(32 * 4)
-#elif defined CONFIG_ARCH_MX3
-#define MXC_GPIO_IRQS		(32 * 3)
-#endif
-
 /*
  * The next 16 interrupts are for board specific purposes.  Since
  * the kernel can only run on one machine at a time, we can re-use
  * these.  If you need more, increase MXC_BOARD_IRQS, but keep it
  * within sensible limits.
  */
-#define MXC_BOARD_IRQ_START	(MXC_INTERNAL_IRQS + MXC_GPIO_IRQS)
+#define MXC_BOARD_IRQ_START	(MXC_INTERNAL_IRQS + ARCH_NR_GPIOS)
 
 #ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
 #define MXC_BOARD_IRQS  80

arch/arm/plat-omap/include/plat/gpio.h

@@ -174,12 +174,32 @@ struct omap_gpio_dev_attr {
 	bool dbck_flag;		/* dbck required or not - True for OMAP3&4 */
 };
 
+struct omap_gpio_reg_offs {
+	u16 revision;
+	u16 direction;
+	u16 datain;
+	u16 dataout;
+	u16 set_dataout;
+	u16 clr_dataout;
+	u16 irqstatus;
+	u16 irqstatus2;
+	u16 irqenable;
+	u16 set_irqenable;
+	u16 clr_irqenable;
+	u16 debounce;
+	u16 debounce_en;
+
+	bool irqenable_inv;
+};
+
 struct omap_gpio_platform_data {
 	u16 virtual_irq_start;
 	int bank_type;
 	int bank_width;		/* GPIO bank width */
 	int bank_stride;	/* Only needed for omap1 MPUIO */
 	bool dbck_flag;		/* dbck required or not - True for OMAP3&4 */
+
+	struct omap_gpio_reg_offs *regs;
 };
 
 /* TODO: Analyze removing gpio_bank_count usage from driver code */

arch/powerpc/platforms/52xx/Kconfig

@@ -55,14 +55,6 @@ config PPC_MPC5200_BUGFIX
 
 	  It is safe to say 'Y' here
 
-config PPC_MPC5200_GPIO
-	bool "MPC5200 GPIO support"
-	depends on PPC_MPC52xx
-	select ARCH_REQUIRE_GPIOLIB
-	select GENERIC_GPIO
-	help
-	  Enable gpiolib support for mpc5200 based boards
-
 config PPC_MPC5200_LPBFIFO
 	tristate "MPC5200 LocalPlus bus FIFO driver"
 	depends on PPC_MPC52xx

arch/powerpc/platforms/52xx/Makefile

@@ -14,5 +14,4 @@ ifeq ($(CONFIG_PPC_LITE5200),y)
 	obj-$(CONFIG_PM)	+= lite5200_sleep.o lite5200_pm.o
 endif
 
-obj-$(CONFIG_PPC_MPC5200_GPIO)	+= mpc52xx_gpio.o
 obj-$(CONFIG_PPC_MPC5200_LPBFIFO)	+= mpc52xx_lpbfifo.o

drivers/gpio/Kconfig

@@ -63,33 +63,58 @@ config GPIO_SYSFS
 	  Kernel drivers may also request that a particular GPIO be
 	  exported to userspace; this can be useful when debugging.
 
+config GPIO_GENERIC
+	tristate
+
 # put drivers in the right section, in alphabetical order
 
+config GPIO_DA9052
+	tristate "Dialog DA9052 GPIO"
+	depends on PMIC_DA9052
+	help
+	  Say yes here to enable the GPIO driver for the DA9052 chip.
+
 config GPIO_MAX730X
 	tristate
 
 comment "Memory mapped GPIO drivers:"
 
-config GPIO_BASIC_MMIO_CORE
-	tristate
-	help
-	  Provides core functionality for basic memory-mapped GPIO controllers.
-
-config GPIO_BASIC_MMIO
-	tristate "Basic memory-mapped GPIO controllers support"
-	select GPIO_BASIC_MMIO_CORE
+config GPIO_GENERIC_PLATFORM
+	tristate "Generic memory-mapped GPIO controller support (MMIO platform device)"
+	select GPIO_GENERIC
 	help
-	  Say yes here to support basic memory-mapped GPIO controllers.
+	  Say yes here to support basic platform_device memory-mapped GPIO controllers.
 
 config GPIO_IT8761E
 	tristate "IT8761E GPIO support"
 	help
 	  Say yes here to support GPIO functionality of IT8761E super I/O chip.
 
+config GPIO_EP93XX
+	def_bool y
+	depends on ARCH_EP93XX
+	select GPIO_GENERIC
+
 config GPIO_EXYNOS4
 	def_bool y
 	depends on CPU_EXYNOS4210
 
+config GPIO_MPC5200
+	def_bool y
+	depends on PPC_MPC52xx
+
+config GPIO_MXC
+	def_bool y
+	depends on ARCH_MXC
+	select GPIO_GENERIC
+	select GENERIC_IRQ_CHIP
+
+config GPIO_MXS
+	def_bool y
+	depends on ARCH_MXS
+	select GPIO_GENERIC
+	select GENERIC_IRQ_CHIP
+
 config GPIO_PLAT_SAMSUNG
 	def_bool y
 	depends on SAMSUNG_GPIOLIB_4BIT
@@ -137,9 +162,6 @@ config GPIO_SCH
 	  The Intel Tunnel Creek processor has 5 GPIOs powered by the
 	  core power rail and 9 from suspend power supply.
 
-	  This driver can also be built as a module. If so, the module
-	  will be called sch-gpio.
-
 config GPIO_VX855
 	tristate "VIA VX855/VX875 GPIO"
 	depends on MFD_SUPPORT && PCI
@@ -202,9 +224,6 @@ config GPIO_PCA953X
 
 	  16 bits:	pca9535, pca9539, pca9555, tca6416
 
-	  This driver can also be built as a module.  If so, the module
-	  will be called pca953x.
-
 config GPIO_PCA953X_IRQ
 	bool "Interrupt controller support for PCA953x"
 	depends on GPIO_PCA953X=y
@@ -296,17 +315,12 @@ config GPIO_ADP5520
 	  This option enables support for on-chip GPIO found
 	  on Analog Devices ADP5520 PMICs.
 
-	  To compile this driver as a module, choose M here: the module will
-	  be called adp5520-gpio.
-
 config GPIO_ADP5588
 	tristate "ADP5588 I2C GPIO expander"
 	depends on I2C
 	help
 	  This option enables support for 18 GPIOs found
 	  on Analog Devices ADP5588 GPIO Expanders.
-	  To compile this driver as a module, choose M here: the module will be
-	  called adp5588-gpio.
 
 config GPIO_ADP5588_IRQ
 	bool "Interrupt controller support for ADP5588"
@@ -398,10 +412,11 @@ config GPIO_MAX7301
 	  GPIO driver for Maxim MAX7301 SPI-based GPIO expander.
 
 config GPIO_MCP23S08
-	tristate "Microchip MCP23Sxx I/O expander"
-	depends on SPI_MASTER
+	tristate "Microchip MCP23xxx I/O expander"
+	depends on SPI_MASTER || I2C
 	help
-	  SPI driver for Microchip MCP23S08/MPC23S17 I/O expanders.
+	  SPI/I2C driver for Microchip MCP23S08/MCP23S17/MCP23008/MCP23017
+	  I/O expanders.
 	  This provides a GPIO interface supporting inputs and outputs.
 
 config GPIO_MC33880
@@ -428,9 +443,6 @@ config GPIO_UCB1400
 	  This enables support for the Philips UCB1400 GPIO pins.
 	  The UCB1400 is an AC97 audio codec.
 
-	  To compile this driver as a module, choose M here: the
-	  module will be called ucb1400_gpio.
-
 comment "MODULbus GPIO expanders:"
 
 config GPIO_JANZ_TTL
@@ -441,7 +453,7 @@ config GPIO_JANZ_TTL
 	  This driver provides support for driving the pins in output
 	  mode only. Input mode is not supported.
 
-config AB8500_GPIO
+config GPIO_AB8500
 	bool "ST-Ericsson AB8500 Mixed Signal Circuit gpio functions"
 	depends on AB8500_CORE && BROKEN
 	help

drivers/gpio/Makefile

@@ -4,47 +4,56 @@ ccflags-$(CONFIG_DEBUG_GPIO)	+= -DDEBUG
 
 obj-$(CONFIG_GPIOLIB)		+= gpiolib.o
 
-obj-$(CONFIG_GPIO_ADP5520)	+= adp5520-gpio.o
-obj-$(CONFIG_GPIO_ADP5588)	+= adp5588-gpio.o
-obj-$(CONFIG_GPIO_BASIC_MMIO_CORE)	+= basic_mmio_gpio.o
-obj-$(CONFIG_GPIO_BASIC_MMIO)	+= basic_mmio_gpio.o
+# Device drivers. Generally keep list sorted alphabetically
+obj-$(CONFIG_GPIO_GENERIC)	+= gpio-generic.o
+
+obj-$(CONFIG_GPIO_74X164)	+= gpio-74x164.o
+obj-$(CONFIG_GPIO_AB8500)	+= gpio-ab8500.o
+obj-$(CONFIG_GPIO_ADP5520)	+= gpio-adp5520.o
+obj-$(CONFIG_GPIO_ADP5588)	+= gpio-adp5588.o
+obj-$(CONFIG_GPIO_BT8XX)	+= gpio-bt8xx.o
+obj-$(CONFIG_GPIO_CS5535)	+= gpio-cs5535.o
+obj-$(CONFIG_GPIO_DA9052)	+= gpio-da9052.o
+obj-$(CONFIG_GPIO_EP93XX)	+= gpio-ep93xx.o
 obj-$(CONFIG_GPIO_EXYNOS4)	+= gpio-exynos4.o
+obj-$(CONFIG_GPIO_IT8761E)	+= gpio-it8761e.o
+obj-$(CONFIG_GPIO_JANZ_TTL)	+= gpio-janz-ttl.o
+obj-$(CONFIG_GPIO_LANGWELL)	+= gpio-langwell.o
+obj-$(CONFIG_GPIO_MAX730X)	+= gpio-max730x.o
+obj-$(CONFIG_GPIO_MAX7300)	+= gpio-max7300.o
+obj-$(CONFIG_GPIO_MAX7301)	+= gpio-max7301.o
+obj-$(CONFIG_GPIO_MAX732X)	+= gpio-max732x.o
+obj-$(CONFIG_GPIO_MC33880)	+= gpio-mc33880.o
+obj-$(CONFIG_GPIO_MCP23S08)	+= gpio-mcp23s08.o
+obj-$(CONFIG_GPIO_ML_IOH)	+= gpio-ml-ioh.o
+obj-$(CONFIG_GPIO_MPC5200)	+= gpio-mpc5200.o
+obj-$(CONFIG_GPIO_MXC)		+= gpio-mxc.o
+obj-$(CONFIG_GPIO_MXS)		+= gpio-mxs.o
+obj-$(CONFIG_PLAT_NOMADIK)	+= gpio-nomadik.o
+obj-$(CONFIG_ARCH_OMAP)		+= gpio-omap.o
+obj-$(CONFIG_GPIO_PCA953X)	+= gpio-pca953x.o
+obj-$(CONFIG_GPIO_PCF857X)	+= gpio-pcf857x.o
+obj-$(CONFIG_GPIO_PCH)		+= gpio-pch.o
+obj-$(CONFIG_GPIO_PL061)	+= gpio-pl061.o
+obj-$(CONFIG_GPIO_RDC321X)	+= gpio-rdc321x.o
+
 obj-$(CONFIG_GPIO_PLAT_SAMSUNG)	+= gpio-plat-samsung.o
 obj-$(CONFIG_GPIO_S5PC100)	+= gpio-s5pc100.o
 obj-$(CONFIG_GPIO_S5PV210)	+= gpio-s5pv210.o
-obj-$(CONFIG_GPIO_LANGWELL)	+= langwell_gpio.o
-obj-$(CONFIG_GPIO_MAX730X)	+= max730x.o
-obj-$(CONFIG_GPIO_MAX7300)	+= max7300.o
-obj-$(CONFIG_GPIO_MAX7301)	+= max7301.o
-obj-$(CONFIG_GPIO_MAX732X)	+= max732x.o
-obj-$(CONFIG_GPIO_MC33880)	+= mc33880.o
-obj-$(CONFIG_GPIO_MCP23S08)	+= mcp23s08.o
-obj-$(CONFIG_GPIO_74X164)	+= 74x164.o
-obj-$(CONFIG_ARCH_OMAP)         += gpio-omap.o
-obj-$(CONFIG_GPIO_PCA953X)	+= pca953x.o
-obj-$(CONFIG_GPIO_PCF857X)	+= pcf857x.o
-obj-$(CONFIG_GPIO_PCH)		+= pch_gpio.o
-obj-$(CONFIG_GPIO_PL061)	+= pl061.o
-obj-$(CONFIG_GPIO_STMPE)	+= stmpe-gpio.o
-obj-$(CONFIG_GPIO_TC3589X)	+= tc3589x-gpio.o
-obj-$(CONFIG_GPIO_TIMBERDALE)	+= timbgpio.o
-obj-$(CONFIG_GPIO_TWL4030)	+= twl4030-gpio.o
-obj-$(CONFIG_GPIO_UCB1400)	+= ucb1400_gpio.o
-obj-$(CONFIG_GPIO_XILINX)	+= xilinx_gpio.o
-obj-$(CONFIG_GPIO_CS5535)	+= cs5535-gpio.o
-obj-$(CONFIG_GPIO_BT8XX)	+= bt8xxgpio.o
-obj-$(CONFIG_GPIO_IT8761E)	+= it8761e_gpio.o
-obj-$(CONFIG_GPIO_VR41XX)	+= vr41xx_giu.o
-obj-$(CONFIG_GPIO_WM831X)	+= wm831x-gpio.o
-obj-$(CONFIG_GPIO_WM8350)	+= wm8350-gpiolib.o
-obj-$(CONFIG_GPIO_WM8994)	+= wm8994-gpio.o
-obj-$(CONFIG_GPIO_SCH)		+= sch_gpio.o
+
+obj-$(CONFIG_GPIO_SCH)		+= gpio-sch.o
+obj-$(CONFIG_GPIO_STMPE)	+= gpio-stmpe.o
+obj-$(CONFIG_GPIO_SX150X)	+= gpio-sx150x.o
+obj-$(CONFIG_GPIO_TC3589X)	+= gpio-tc3589x.o
+obj-$(CONFIG_ARCH_TEGRA)	+= gpio-tegra.o
+obj-$(CONFIG_GPIO_TIMBERDALE)	+= gpio-timberdale.o
+obj-$(CONFIG_GPIO_TPS65910)	+= gpio-tps65910.o
+obj-$(CONFIG_GPIO_TWL4030)	+= gpio-twl4030.o
 obj-$(CONFIG_MACH_U300)		+= gpio-u300.o
-obj-$(CONFIG_PLAT_NOMADIK)	+= gpio-nomadik.o
-obj-$(CONFIG_GPIO_RDC321X)	+= rdc321x-gpio.o
-obj-$(CONFIG_GPIO_JANZ_TTL)	+= janz-ttl.o
-obj-$(CONFIG_GPIO_SX150X)	+= sx150x.o
-obj-$(CONFIG_GPIO_VX855)	+= vx855_gpio.o
-obj-$(CONFIG_GPIO_ML_IOH)	+= ml_ioh_gpio.o
-obj-$(CONFIG_AB8500_GPIO)       += ab8500-gpio.o
-obj-$(CONFIG_GPIO_TPS65910)	+= tps65910-gpio.o
+obj-$(CONFIG_GPIO_UCB1400)	+= gpio-ucb1400.o
+obj-$(CONFIG_GPIO_VR41XX)	+= gpio-vr41xx.o
+obj-$(CONFIG_GPIO_VX855)	+= gpio-vx855.o
+obj-$(CONFIG_GPIO_WM831X)	+= gpio-wm831x.o
+obj-$(CONFIG_GPIO_WM8350)	+= gpio-wm8350.o
+obj-$(CONFIG_GPIO_WM8994)	+= gpio-wm8994.o
+obj-$(CONFIG_GPIO_XILINX)	+= gpio-xilinx.o

drivers/gpio/74x164.c → drivers/gpio/gpio-74x164.c

@@ -16,9 +16,6 @@
 #include <linux/gpio.h>
 #include <linux/slab.h>
 
-#define GEN_74X164_GPIO_COUNT	8
-
-
 struct gen_74x164_chip {
 	struct spi_device	*spi;
 	struct gpio_chip	gpio_chip;
@@ -26,9 +23,7 @@ struct gen_74x164_chip {
 	u8			port_config;
 };
 
-static void gen_74x164_set_value(struct gpio_chip *, unsigned, int);
-
-static struct gen_74x164_chip *gpio_to_chip(struct gpio_chip *gc)
+static struct gen_74x164_chip *gpio_to_74x164_chip(struct gpio_chip *gc)
 {
 	return container_of(gc, struct gen_74x164_chip, gpio_chip);
 }
@@ -39,16 +34,9 @@ static int __gen_74x164_write_config(struct gen_74x164_chip *chip)
 			 &chip->port_config, sizeof(chip->port_config));
 }
 
-static int gen_74x164_direction_output(struct gpio_chip *gc,
-		unsigned offset, int val)
-{
-	gen_74x164_set_value(gc, offset, val);
-	return 0;
-}
-
 static int gen_74x164_get_value(struct gpio_chip *gc, unsigned offset)
 {
-	struct gen_74x164_chip *chip = gpio_to_chip(gc);
+	struct gen_74x164_chip *chip = gpio_to_74x164_chip(gc);
 	int ret;
 
 	mutex_lock(&chip->lock);
@@ -61,7 +49,7 @@ static int gen_74x164_get_value(struct gpio_chip *gc, unsigned offset)
 static void gen_74x164_set_value(struct gpio_chip *gc,
 		unsigned offset, int val)
 {
-	struct gen_74x164_chip *chip = gpio_to_chip(gc);
+	struct gen_74x164_chip *chip = gpio_to_74x164_chip(gc);
 
 	mutex_lock(&chip->lock);
 	if (val)
@@ -73,6 +61,13 @@ static void gen_74x164_set_value(struct gpio_chip *gc,
 	mutex_unlock(&chip->lock);
 }
 
+static int gen_74x164_direction_output(struct gpio_chip *gc,
+		unsigned offset, int val)
+{
+	gen_74x164_set_value(gc, offset, val);
+	return 0;
+}
+
 static int __devinit gen_74x164_probe(struct spi_device *spi)
 {
 	struct gen_74x164_chip *chip;
@@ -104,12 +99,12 @@ static int __devinit gen_74x164_probe(struct spi_device *spi)
 
 	chip->spi = spi;
 
-	chip->gpio_chip.label = GEN_74X164_DRIVER_NAME,
-		chip->gpio_chip.direction_output = gen_74x164_direction_output;
+	chip->gpio_chip.label = spi->modalias;
+	chip->gpio_chip.direction_output = gen_74x164_direction_output;
 	chip->gpio_chip.get = gen_74x164_get_value;
 	chip->gpio_chip.set = gen_74x164_set_value;
 	chip->gpio_chip.base = pdata->base;
-	chip->gpio_chip.ngpio = GEN_74X164_GPIO_COUNT;
+	chip->gpio_chip.ngpio = 8;
 	chip->gpio_chip.can_sleep = 1;
 	chip->gpio_chip.dev = &spi->dev;
 	chip->gpio_chip.owner = THIS_MODULE;
@@ -157,7 +152,7 @@ static int __devexit gen_74x164_remove(struct spi_device *spi)
 
 static struct spi_driver gen_74x164_driver = {
 	.driver = {
-		.name		= GEN_74X164_DRIVER_NAME,
+		.name		= "74x164",
 		.owner		= THIS_MODULE,
 	},
 	.probe		= gen_74x164_probe,

drivers/gpio/gpio-da9052.c

@@ -0,0 +1,277 @@
+/*
+ * GPIO Driver for Dialog DA9052 PMICs.
+ *
+ * Copyright(c) 2011 Dialog Semiconductor Ltd.
+ *
+ * Author: David Dajun Chen <dchen@diasemi.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/uaccess.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/syscalls.h>
+#include <linux/seq_file.h>
+
+#include <linux/mfd/da9052/da9052.h>
+#include <linux/mfd/da9052/reg.h>
+#include <linux/mfd/da9052/pdata.h>
+#include <linux/mfd/da9052/gpio.h>
+
+#define DA9052_INPUT				1
+#define DA9052_OUTPUT_OPENDRAIN		2
+#define DA9052_OUTPUT_PUSHPULL			3
+
+#define DA9052_SUPPLY_VDD_IO1			0
+
+#define DA9052_DEBOUNCING_OFF			0
+#define DA9052_DEBOUNCING_ON			1
+
+#define DA9052_OUTPUT_LOWLEVEL			0
+
+#define DA9052_ACTIVE_LOW			0
+#define DA9052_ACTIVE_HIGH			1
+
+#define DA9052_GPIO_MAX_PORTS_PER_REGISTER	8
+#define DA9052_GPIO_SHIFT_COUNT(no)		(no%8)
+#define DA9052_GPIO_MASK_UPPER_NIBBLE		0xF0
+#define DA9052_GPIO_MASK_LOWER_NIBBLE		0x0F
+#define DA9052_GPIO_NIBBLE_SHIFT		4
+
+struct da9052_gpio {
+	struct da9052 *da9052;
+	struct gpio_chip gp;
+};
+
+static inline struct da9052_gpio *to_da9052_gpio(struct gpio_chip *chip)
+{
+	return container_of(chip, struct da9052_gpio, gp);
+}
+
+static unsigned char da9052_gpio_port_odd(unsigned offset)
+{
+	return offset % 2;
+}
+
+static int da9052_gpio_get(struct gpio_chip *gc, unsigned offset)
+{
+	struct da9052_gpio *gpio = to_da9052_gpio(gc);
+	int da9052_port_direction = 0;
+	int ret;
+
+	ret = da9052_reg_read(gpio->da9052,
+			      DA9052_GPIO_0_1_REG + (offset >> 1));
+	if (ret < 0)
+		return ret;
+
+	if (da9052_gpio_port_odd(offset)) {
+		da9052_port_direction = ret & DA9052_GPIO_ODD_PORT_PIN;
+		da9052_port_direction >>= 4;
+	} else {
+		da9052_port_direction = ret & DA9052_GPIO_EVEN_PORT_PIN;
+	}
+
+	switch (da9052_port_direction) {
+	case DA9052_INPUT:
+		if (offset < DA9052_GPIO_MAX_PORTS_PER_REGISTER)
+			ret = da9052_reg_read(gpio->da9052,
+					      DA9052_STATUS_C_REG);
+		else
+			ret = da9052_reg_read(gpio->da9052,
+					      DA9052_STATUS_D_REG);
+		if (ret < 0)
+			return ret;
+		if (ret & (1 << DA9052_GPIO_SHIFT_COUNT(offset)))
+			return 1;
+		else
+			return 0;
+	case DA9052_OUTPUT_PUSHPULL:
+		if (da9052_gpio_port_odd(offset))
+			return ret & DA9052_GPIO_ODD_PORT_MODE;
+		else
+			return ret & DA9052_GPIO_EVEN_PORT_MODE;
+	default:
+		return -EINVAL;
+	}
+}
+
+static void da9052_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
+{
+	struct da9052_gpio *gpio = to_da9052_gpio(gc);
+	unsigned char register_value = 0;
+	int ret;
+
+	if (da9052_gpio_port_odd(offset)) {
+		if (value) {
+			register_value = DA9052_GPIO_ODD_PORT_MODE;
+			ret = da9052_reg_update(gpio->da9052, (offset >> 1) +
+						DA9052_GPIO_0_1_REG,
+						DA9052_GPIO_ODD_PORT_MODE,
+						register_value);
+			if (ret != 0)
+				dev_err(gpio->da9052->dev,
+					"Failed to updated gpio odd reg,%d",
+					ret);
+		}
+	} else {
+		if (value) {
+			register_value = DA9052_GPIO_EVEN_PORT_MODE;
+			ret = da9052_reg_update(gpio->da9052, (offset >> 1) +
+						DA9052_GPIO_0_1_REG,
+						DA9052_GPIO_EVEN_PORT_MODE,
+						register_value);
+			if (ret != 0)
+				dev_err(gpio->da9052->dev,
+					"Failed to updated gpio even reg,%d",
+					ret);
+		}
+	}
+}
+
+static int da9052_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
+{
+	struct da9052_gpio *gpio = to_da9052_gpio(gc);
+	unsigned char register_value;
+	int ret;
+
+	/* Format: function - 2 bits type - 1 bit mode - 1 bit */
+	register_value = DA9052_INPUT | DA9052_ACTIVE_LOW << 2 |
+			 DA9052_DEBOUNCING_ON << 3;
+
+	if (da9052_gpio_port_odd(offset))
+		ret = da9052_reg_update(gpio->da9052, (offset >> 1) +
+					DA9052_GPIO_0_1_REG,
+					DA9052_GPIO_MASK_UPPER_NIBBLE,
+					(register_value <<
+					DA9052_GPIO_NIBBLE_SHIFT));
+	else
+		ret = da9052_reg_update(gpio->da9052, (offset >> 1) +
+					DA9052_GPIO_0_1_REG,
+					DA9052_GPIO_MASK_LOWER_NIBBLE,
+					register_value);
+
+	return ret;
+}
+
+static int da9052_gpio_direction_output(struct gpio_chip *gc,
+					unsigned offset, int value)
+{
+	struct da9052_gpio *gpio = to_da9052_gpio(gc);
+	unsigned char register_value;
+	int ret;
+
+	/* Format: Function - 2 bits Type - 1 bit Mode - 1 bit */
+	register_value = DA9052_OUTPUT_PUSHPULL | DA9052_SUPPLY_VDD_IO1 << 2 |
+			 value << 3;
+
+	if (da9052_gpio_port_odd(offset))
+		ret = da9052_reg_update(gpio->da9052, (offset >> 1) +
+					DA9052_GPIO_0_1_REG,
+					DA9052_GPIO_MASK_UPPER_NIBBLE,
+					(register_value <<
+					DA9052_GPIO_NIBBLE_SHIFT));
+	else
+		ret = da9052_reg_update(gpio->da9052, (offset >> 1) +
+					DA9052_GPIO_0_1_REG,
+					DA9052_GPIO_MASK_LOWER_NIBBLE,
+					register_value);
+
+	return ret;
+}
+
+static int da9052_gpio_to_irq(struct gpio_chip *gc, u32 offset)
+{
+	struct da9052_gpio *gpio = to_da9052_gpio(gc);
+	struct da9052 *da9052 = gpio->da9052;
+
+	return da9052->irq_base + DA9052_IRQ_GPI0 + offset;
+}
+
+static struct gpio_chip reference_gp __devinitdata = {
+	.label = "da9052-gpio",
+	.owner = THIS_MODULE,
+	.get = da9052_gpio_get,
+	.set = da9052_gpio_set,
+	.direction_input = da9052_gpio_direction_input,
+	.direction_output = da9052_gpio_direction_output,
+	.to_irq = da9052_gpio_to_irq,
+	.can_sleep = 1;
+	.ngpio = 16;
+	.base = -1;
+};
+
+static int __devinit da9052_gpio_probe(struct platform_device *pdev)
+{
+	struct da9052_gpio *gpio;
+	struct da9052_pdata *pdata;
+	int ret;
+
+	gpio = kzalloc(sizeof(*gpio), GFP_KERNEL);
+	if (gpio == NULL)
+		return -ENOMEM;
+
+	gpio->da9052 = dev_get_drvdata(pdev->dev.parent);
+	pdata = gpio->da9052->dev->platform_data;
+
+	gpio->gp = reference_gp;
+	if (pdata && pdata->gpio_base)
+		gpio->gp.base = pdata->gpio_base;
+
+	ret = gpiochip_add(&gpio->gp);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
+		goto err_mem;
+	}
+
+	platform_set_drvdata(pdev, gpio);
+
+	return 0;
+
+err_mem:
+	kfree(gpio);
+	return ret;
+}
+
+static int __devexit da9052_gpio_remove(struct platform_device *pdev)
+{
+	struct da9052_gpio *gpio = platform_get_drvdata(pdev);
+	int ret;
+
+	ret = gpiochip_remove(&gpio->gp);
+	if (ret == 0)
+		kfree(gpio);
+
+	return ret;
+}
+
+static struct platform_driver da9052_gpio_driver = {
+	.probe = da9052_gpio_probe,
+	.remove = __devexit_p(da9052_gpio_remove),
+	.driver = {
+		.name	= "da9052-gpio",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init da9052_gpio_init(void)
+{
+	return platform_driver_register(&da9052_gpio_driver);
+}
+module_init(da9052_gpio_init);
+
+static void __exit da9052_gpio_exit(void)
+{
+	return platform_driver_unregister(&da9052_gpio_driver);
+}
+module_exit(da9052_gpio_exit);
+
+MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>");
+MODULE_DESCRIPTION("DA9052 GPIO Device Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:da9052-gpio");

arch/arm/mach-ep93xx/gpio.c → drivers/gpio/gpio-ep93xx.c

@@ -1,9 +1,8 @@
 /*
- * linux/arch/arm/mach-ep93xx/gpio.c
- *
  * Generic EP93xx GPIO handling
  *
  * Copyright (c) 2008 Ryan Mallon <ryan@bluewatersys.com>
+ * Copyright (c) 2011 H Hartley Sweeten <hsweeten@visionengravers.com>
  *
  * Based on code originally from:
  *  linux/arch/arm/mach-ep93xx/core.c
@@ -13,17 +12,23 @@
  *  published by the Free Software Foundation.
  */
 
-#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/init.h>
-#include <linux/module.h>
-#include <linux/seq_file.h>
+#include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/basic_mmio_gpio.h>
 
 #include <mach/hardware.h>
 
+struct ep93xx_gpio {
+	void __iomem		*mmio_base;
+	struct bgpio_chip	bgc[8];
+};
+
 /*************************************************************************
  * Interrupt handling for EP93xx on-chip GPIOs
  *************************************************************************/
@@ -225,7 +230,7 @@ static struct irq_chip ep93xx_gpio_irq_chip = {
 	.irq_set_type	= ep93xx_gpio_irq_type,
 };
 
-void __init ep93xx_gpio_init_irq(void)
+static void ep93xx_gpio_init_irq(void)
 {
 	int gpio_irq;
 
@@ -260,151 +265,141 @@ void __init ep93xx_gpio_init_irq(void)
 /*************************************************************************
  * gpiolib interface for EP93xx on-chip GPIOs
  *************************************************************************/
-struct ep93xx_gpio_chip {
-	struct gpio_chip	chip;
-
-	void __iomem		*data_reg;
-	void __iomem		*data_dir_reg;
+struct ep93xx_gpio_bank {
+	const char	*label;
+	int		data;
+	int		dir;
+	int		base;
+	bool		has_debounce;
 };
 
-#define to_ep93xx_gpio_chip(c) container_of(c, struct ep93xx_gpio_chip, chip)
+#define EP93XX_GPIO_BANK(_label, _data, _dir, _base, _debounce)	\
+	{							\
+		.label		= _label,			\
+		.data		= _data,			\
+		.dir		= _dir,				\
+		.base		= _base,			\
+		.has_debounce	= _debounce,			\
+	}
+
+static struct ep93xx_gpio_bank ep93xx_gpio_banks[] = {
+	EP93XX_GPIO_BANK("A", 0x00, 0x10, 0, true),
+	EP93XX_GPIO_BANK("B", 0x04, 0x14, 8, true),
+	EP93XX_GPIO_BANK("C", 0x08, 0x18, 40, false),
+	EP93XX_GPIO_BANK("D", 0x0c, 0x1c, 24, false),
+	EP93XX_GPIO_BANK("E", 0x20, 0x24, 32, false),
+	EP93XX_GPIO_BANK("F", 0x30, 0x34, 16, true),
+	EP93XX_GPIO_BANK("G", 0x38, 0x3c, 48, false),
+	EP93XX_GPIO_BANK("H", 0x40, 0x44, 56, false),
+};
 
-static int ep93xx_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+static int ep93xx_gpio_set_debounce(struct gpio_chip *chip,
+				    unsigned offset, unsigned debounce)
 {
-	struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip);
-	unsigned long flags;
-	u8 v;
+	int gpio = chip->base + offset;
+	int irq = gpio_to_irq(gpio);
+
+	if (irq < 0)
+		return -EINVAL;
 
-	local_irq_save(flags);
-	v = __raw_readb(ep93xx_chip->data_dir_reg);
-	v &= ~(1 << offset);
-	__raw_writeb(v, ep93xx_chip->data_dir_reg);
-	local_irq_restore(flags);
+	ep93xx_gpio_int_debounce(irq, debounce ? true : false);
 
 	return 0;
 }
 
-static int ep93xx_gpio_direction_output(struct gpio_chip *chip,
-					unsigned offset, int val)
+static int ep93xx_gpio_add_bank(struct bgpio_chip *bgc, struct device *dev,
+	void __iomem *mmio_base, struct ep93xx_gpio_bank *bank)
 {
-	struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip);
-	unsigned long flags;
-	int line;
-	u8 v;
+	void __iomem *data = mmio_base + bank->data;
+	void __iomem *dir =  mmio_base + bank->dir;
+	int err;
 
-	local_irq_save(flags);
+	err = bgpio_init(bgc, dev, 1, data, NULL, NULL, dir, NULL, false);
+	if (err)
+		return err;
 
-	/* Set the value */
-	v = __raw_readb(ep93xx_chip->data_reg);
-	if (val)
-		v |= (1 << offset);
-	else
-		v &= ~(1 << offset);
-	__raw_writeb(v, ep93xx_chip->data_reg);
-
-	/* Drive as an output */
-	line = chip->base + offset;
-	if (line <= EP93XX_GPIO_LINE_MAX_IRQ) {
-		/* Ports A/B/F */
-		ep93xx_gpio_int_mask(line);
-		ep93xx_gpio_update_int_params(line >> 3);
-	}
+	bgc->gc.label = bank->label;
+	bgc->gc.base = bank->base;
 
-	v = __raw_readb(ep93xx_chip->data_dir_reg);
-	v |= (1 << offset);
-	__raw_writeb(v, ep93xx_chip->data_dir_reg);
+	if (bank->has_debounce)
+		bgc->gc.set_debounce = ep93xx_gpio_set_debounce;
 
-	local_irq_restore(flags);
-
-	return 0;
+	return gpiochip_add(&bgc->gc);
 }
 
-static int ep93xx_gpio_get(struct gpio_chip *chip, unsigned offset)
+static int __devinit ep93xx_gpio_probe(struct platform_device *pdev)
 {
-	struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip);
+	struct ep93xx_gpio *ep93xx_gpio;
+	struct resource *res;
+	void __iomem *mmio;
+	int i;
+	int ret;
 
-	return !!(__raw_readb(ep93xx_chip->data_reg) & (1 << offset));
-}
+	ep93xx_gpio = kzalloc(sizeof(*ep93xx_gpio), GFP_KERNEL);
+	if (!ep93xx_gpio)
+		return -ENOMEM;
 
-static void ep93xx_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
-{
-	struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip);
-	unsigned long flags;
-	u8 v;
-
-	local_irq_save(flags);
-	v = __raw_readb(ep93xx_chip->data_reg);
-	if (val)
-		v |= (1 << offset);
-	else
-		v &= ~(1 << offset);
-	__raw_writeb(v, ep93xx_chip->data_reg);
-	local_irq_restore(flags);
-}
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		ret = -ENXIO;
+		goto exit_free;
+	}
 
-static int ep93xx_gpio_set_debounce(struct gpio_chip *chip,
-				    unsigned offset, unsigned debounce)
-{
-	int gpio = chip->base + offset;
-	int irq = gpio_to_irq(gpio);
+	if (!request_mem_region(res->start, resource_size(res), pdev->name)) {
+		ret = -EBUSY;
+		goto exit_free;
+	}
 
-	if (irq < 0)
-		return -EINVAL;
+	mmio = ioremap(res->start, resource_size(res));
+	if (!mmio) {
+		ret = -ENXIO;
+		goto exit_release;
+	}
+	ep93xx_gpio->mmio_base = mmio;
 
-	ep93xx_gpio_int_debounce(irq, debounce ? true : false);
+	/* Default all ports to GPIO */
+	ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS |
+			       EP93XX_SYSCON_DEVCFG_GONK |
+			       EP93XX_SYSCON_DEVCFG_EONIDE |
+			       EP93XX_SYSCON_DEVCFG_GONIDE |
+			       EP93XX_SYSCON_DEVCFG_HONIDE);
 
-	return 0;
-}
+	for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_banks); i++) {
+		struct bgpio_chip *bgc = &ep93xx_gpio->bgc[i];
+		struct ep93xx_gpio_bank *bank = &ep93xx_gpio_banks[i];
 
-#define EP93XX_GPIO_BANK(name, dr, ddr, base_gpio)			\
-	{								\
-		.chip = {						\
-			.label		  = name,			\
-			.direction_input  = ep93xx_gpio_direction_input, \
-			.direction_output = ep93xx_gpio_direction_output, \
-			.get		  = ep93xx_gpio_get,		\
-			.set		  = ep93xx_gpio_set,		\
-			.base		  = base_gpio,			\
-			.ngpio		  = 8,				\
-		},							\
-		.data_reg	= EP93XX_GPIO_REG(dr),			\
-		.data_dir_reg	= EP93XX_GPIO_REG(ddr),			\
+		if (ep93xx_gpio_add_bank(bgc, &pdev->dev, mmio, bank))
+			dev_warn(&pdev->dev, "Unable to add gpio bank %s\n",
+				bank->label);
 	}
 
-static struct ep93xx_gpio_chip ep93xx_gpio_banks[] = {
-	EP93XX_GPIO_BANK("A", 0x00, 0x10, 0),
-	EP93XX_GPIO_BANK("B", 0x04, 0x14, 8),
-	EP93XX_GPIO_BANK("C", 0x08, 0x18, 40),
-	EP93XX_GPIO_BANK("D", 0x0c, 0x1c, 24),
-	EP93XX_GPIO_BANK("E", 0x20, 0x24, 32),
-	EP93XX_GPIO_BANK("F", 0x30, 0x34, 16),
-	EP93XX_GPIO_BANK("G", 0x38, 0x3c, 48),
-	EP93XX_GPIO_BANK("H", 0x40, 0x44, 56),
-};
+	ep93xx_gpio_init_irq();
 
-void __init ep93xx_gpio_init(void)
-{
-	int i;
+	return 0;
 
-	/* Set Ports C, D, E, G, and H for GPIO use */
-	ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS |
-				 EP93XX_SYSCON_DEVCFG_GONK |
-				 EP93XX_SYSCON_DEVCFG_EONIDE |
-				 EP93XX_SYSCON_DEVCFG_GONIDE |
-				 EP93XX_SYSCON_DEVCFG_HONIDE);
+exit_release:
+	release_mem_region(res->start, resource_size(res));
+exit_free:
+	kfree(ep93xx_gpio);
+	dev_info(&pdev->dev, "%s failed with errno %d\n", __func__, ret);
+	return ret;
+}
 
-	for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_banks); i++) {
-		struct gpio_chip *chip = &ep93xx_gpio_banks[i].chip;
-
-		/*
-		 * Ports A, B, and F support input debouncing when
-		 * used as interrupts.
-		 */
-		if (!strcmp(chip->label, "A") ||
-		    !strcmp(chip->label, "B") ||
-		    !strcmp(chip->label, "F"))
-			chip->set_debounce = ep93xx_gpio_set_debounce;
-
-		gpiochip_add(chip);
-	}
+static struct platform_driver ep93xx_gpio_driver = {
+	.driver		= {
+		.name	= "gpio-ep93xx",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= ep93xx_gpio_probe,
+};
+
+static int __init ep93xx_gpio_init(void)
+{
+	return platform_driver_register(&ep93xx_gpio_driver);
 }
+postcore_initcall(ep93xx_gpio_init);
+
+MODULE_AUTHOR("Ryan Mallon <ryan@bluewatersys.com> "
+		"H Hartley Sweeten <hsweeten@visionengravers.com>");
+MODULE_DESCRIPTION("EP93XX GPIO driver");
+MODULE_LICENSE("GPL");

drivers/gpio/gpio-exynos4.c

@@ -1,10 +1,9 @@
-/* linux/arch/arm/mach-exynos4/gpiolib.c
+/*
+ * EXYNOS4 - GPIOlib support
  *
  * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
- * EXYNOS4 - GPIOlib support
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.

drivers/gpio/basic_mmio_gpio.c → drivers/gpio/gpio-generic.c

@@ -1,5 +1,5 @@
 /*
- * Driver for basic memory-mapped GPIO controllers.
+ * Generic driver for memory-mapped GPIO controllers.
  *
  * Copyright 2008 MontaVista Software, Inc.
  * Copyright 2008,2010 Anton Vorontsov <cbouatmailru@gmail.com>
@@ -404,7 +404,7 @@ int __devinit bgpio_init(struct bgpio_chip *bgc,
 }
 EXPORT_SYMBOL_GPL(bgpio_init);
 
-#ifdef CONFIG_GPIO_BASIC_MMIO
+#ifdef CONFIG_GPIO_GENERIC_PLATFORM
 
 static void __iomem *bgpio_map(struct platform_device *pdev,
 			       const char *name,
@@ -541,7 +541,7 @@ static void __exit bgpio_platform_exit(void)
 }
 module_exit(bgpio_platform_exit);
 
-#endif /* CONFIG_GPIO_BASIC_MMIO */
+#endif /* CONFIG_GPIO_GENERIC_PLATFORM */
 
 MODULE_DESCRIPTION("Driver for basic memory-mapped GPIO controllers");
 MODULE_AUTHOR("Anton Vorontsov <cbouatmailru@gmail.com>");

drivers/gpio/it8761e_gpio.c → drivers/gpio/gpio-it8761e.c

@@ -1,5 +1,5 @@
 /*
- *  it8761_gpio.c - GPIO interface for IT8761E Super I/O chip
+ *  GPIO interface for IT8761E Super I/O chip
  *
  *  Author: Denis Turischev <denis@compulab.co.il>
  *

drivers/gpio/langwell_gpio.c → drivers/gpio/gpio-langwell.c

@@ -1,4 +1,6 @@
-/* langwell_gpio.c Moorestown platform Langwell chip GPIO driver
+/*
+ * Moorestown platform Langwell chip GPIO driver
+ *
  * Copyright (c) 2008 - 2009,  Intel Corporation.
  *
  * This program is free software; you can redistribute it and/or modify

drivers/gpio/max7300.c → drivers/gpio/gpio-max7300.c

@@ -1,6 +1,4 @@
 /*
- * drivers/gpio/max7300.c
- *
  * Copyright (C) 2009 Wolfram Sang, Pengutronix
  *
  * This program is free software; you can redistribute it and/or modify

drivers/gpio/max7301.c → drivers/gpio/gpio-max7301.c

@@ -1,6 +1,4 @@
 /*
- * drivers/gpio/max7301.c
- *
  * Copyright (C) 2006 Juergen Beisert, Pengutronix
  * Copyright (C) 2008 Guennadi Liakhovetski, Pengutronix
  * Copyright (C) 2009 Wolfram Sang, Pengutronix

drivers/gpio/max730x.c → drivers/gpio/gpio-max730x.c

@@ -1,6 +1,4 @@
 /**
- * drivers/gpio/max7301.c
- *
  * Copyright (C) 2006 Juergen Beisert, Pengutronix
  * Copyright (C) 2008 Guennadi Liakhovetski, Pengutronix
  * Copyright (C) 2009 Wolfram Sang, Pengutronix

drivers/gpio/max732x.c → drivers/gpio/gpio-max732x.c

@@ -1,5 +1,5 @@
 /*
- *  max732x.c - I2C Port Expander with 8/16 I/O
+ *  MAX732x I2C Port Expander with 8/16 I/O
  *
  *  Copyright (C) 2007 Marvell International Ltd.
  *  Copyright (C) 2008 Jack Ren <jack.ren@marvell.com>