Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into devel-stable

arch/arm/Makefile

@@ -158,9 +158,8 @@ machine-$(CONFIG_ARCH_MV78XX0)		:= mv78xx0
 machine-$(CONFIG_ARCH_MX1)		:= imx
 machine-$(CONFIG_ARCH_MX2)		:= imx
 machine-$(CONFIG_ARCH_MX25)		:= imx
-machine-$(CONFIG_ARCH_MX3)		:= mx3
+machine-$(CONFIG_ARCH_MX3)		:= imx
 machine-$(CONFIG_ARCH_MX5)		:= mx5
-machine-$(CONFIG_ARCH_MXC91231)		:= mxc91231
 machine-$(CONFIG_ARCH_MXS)		:= mxs
 machine-$(CONFIG_ARCH_NETX)		:= netx
 machine-$(CONFIG_ARCH_NOMADIK)		:= nomadik

arch/arm/configs/mx1_defconfig

@@ -15,6 +15,7 @@ CONFIG_ARCH_MXC=y
 CONFIG_ARCH_MX1=y
 CONFIG_ARCH_MX1ADS=y
 CONFIG_MACH_SCB9328=y
+CONFIG_MACH_APF9328=y
 CONFIG_MXC_IRQ_PRIOR=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y

arch/arm/configs/mx51_defconfig

@@ -13,7 +13,7 @@ CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_MXC=y
-CONFIG_ARCH_MX5=y
+CONFIG_ARCH_MX51=y
 CONFIG_MACH_MX51_BABBAGE=y
 CONFIG_MACH_MX51_3DS=y
 CONFIG_MACH_EUKREA_CPUIMX51=y

arch/arm/mach-imx/Kconfig

@@ -1,5 +1,15 @@
 config IMX_HAVE_DMA_V1
 	bool
+#
+# ARCH_MX31 and ARCH_MX35 are left for compatibility
+# Some usages assume that having one of them implies not having (e.g.) ARCH_MX2.
+# To easily distinguish good and reviewed from unreviewed usages new (and IMHO
+# more sensible) names are used: SOC_IMX31 and SOC_IMX35
+config ARCH_MX31
+	bool
+
+config ARCH_MX35
+	bool
 
 config SOC_IMX1
 	bool
@@ -31,6 +41,24 @@ config SOC_IMX27
 	select IMX_HAVE_IOMUX_V1
 	select MXC_AVIC
 
+config SOC_IMX31
+	bool
+	select CPU_V6
+	select IMX_HAVE_PLATFORM_MXC_RNGA
+	select ARCH_MXC_AUDMUX_V2
+	select ARCH_MX31
+	select MXC_AVIC
+
+config SOC_IMX35
+	bool
+	select CPU_V6
+	select ARCH_MXC_IOMUX_V3
+	select ARCH_MXC_AUDMUX_V2
+	select HAVE_EPIT
+	select ARCH_MX35
+	select MXC_AVIC
+
+
 if ARCH_MX1
 
 comment "MX1 platforms:"
@@ -40,6 +68,7 @@ config MACH_MXLADS
 config ARCH_MX1ADS
 	bool "MX1ADS platform"
 	select MACH_MXLADS
+	select SOC_IMX1
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
 	help
@@ -51,6 +80,13 @@ config MACH_SCB9328
 	help
 	  Say Y here if you are using a Synertronixx scb9328 board
 
+config MACH_APF9328
+	bool "APF9328"
+	select SOC_IMX1
+	select IMX_HAVE_PLATFORM_IMX_UART
+	help
+	  Say Yes here if you are using the Armadeus APF9328 development board
+
 endif
 
 if ARCH_MX2
@@ -129,6 +165,7 @@ choice
 
 config MACH_EUKREA_MBIMXSD25_BASEBOARD
 	bool "Eukrea MBIMXSD development board"
+	select IMX_HAVE_PLATFORM_GPIO_KEYS
 	select IMX_HAVE_PLATFORM_IMX_SSI
 	help
 	  This adds board specific devices that can be found on Eukrea's
@@ -254,6 +291,7 @@ config MACH_MX27_3DS
 config MACH_IMX27_VISSTRIM_M10
 	bool "Vista Silicon i.MX27 Visstrim_m10"
 	select SOC_IMX27
+	select IMX_HAVE_PLATFORM_GPIO_KEYS
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_SSI
 	select IMX_HAVE_PLATFORM_IMX_UART
@@ -314,3 +352,251 @@ config MACH_IMX27IPCAM
 	  configurations for the board and its peripherals.
 
 endif
+
+if ARCH_MX3
+
+comment "MX31 platforms:"
+
+config MACH_MX31ADS
+	bool "Support MX31ADS platforms"
+	select SOC_IMX31
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_SSI
+	select IMX_HAVE_PLATFORM_IMX_UART
+	default y
+	help
+	  Include support for MX31ADS platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_MX31ADS_WM1133_EV1
+	bool "Support Wolfson Microelectronics 1133-EV1 module"
+	depends on MACH_MX31ADS
+	depends on MFD_WM8350_I2C
+	depends on REGULATOR_WM8350
+	select MFD_WM8350_CONFIG_MODE_0
+	select MFD_WM8352_CONFIG_MODE_0
+	help
+	  Include support for the Wolfson Microelectronics 1133-EV1 PMU
+	  and audio module for the MX31ADS platform.
+
+config MACH_MX31LILLY
+	bool "Support MX31 LILLY-1131 platforms (INCO startec)"
+	select SOC_IMX31
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IPU_CORE
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select MXC_ULPI if USB_ULPI
+	help
+	  Include support for mx31 based LILLY1131 modules. This includes
+	  specific configurations for the board and its peripherals.
+
+config MACH_MX31LITE
+	bool "Support MX31 LITEKIT (LogicPD)"
+	select SOC_IMX31
+	select MXC_ULPI if USB_ULPI
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_MXC_RTC
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	help
+	  Include support for MX31 LITEKIT platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_PCM037
+	bool "Support Phytec pcm037 (i.MX31) platforms"
+	select SOC_IMX31
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IPU_CORE
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_MXC_W1
+	select MXC_ULPI if USB_ULPI
+	help
+	  Include support for Phytec pcm037 platform. This includes
+	  specific configurations for the board and its peripherals.
+
+config MACH_PCM037_EET
+	bool "Support pcm037 EET board extensions"
+	depends on MACH_PCM037
+	select IMX_HAVE_PLATFORM_GPIO_KEYS
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	help
+	  Add support for PCM037 EET baseboard extensions. If you are using the
+	  OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
+	  command-line parameter.
+
+config MACH_MX31_3DS
+	bool "Support MX31PDK (3DS)"
+	select SOC_IMX31
+	select MXC_DEBUG_BOARD
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_KEYPAD
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IPU_CORE
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select MXC_ULPI if USB_ULPI
+	help
+	  Include support for MX31PDK (3DS) platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_MX31_3DS_MXC_NAND_USE_BBT
+	bool "Make the MXC NAND driver use the in flash Bad Block Table"
+	depends on MACH_MX31_3DS
+	depends on MTD_NAND_MXC
+	help
+	  Enable this if you want that the MXC NAND driver uses the in flash
+	  Bad Block Table to know what blocks are bad instead of scanning the
+	  entire flash looking for bad block markers.
+
+config MACH_MX31MOBOARD
+	bool "Support mx31moboard platforms (EPFL Mobots group)"
+	select SOC_IMX31
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IPU_CORE
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select MXC_ULPI if USB_ULPI
+	help
+	  Include support for mx31moboard platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_QONG
+	bool "Support Dave/DENX QongEVB-LITE platform"
+	select SOC_IMX31
+	select IMX_HAVE_PLATFORM_IMX_UART
+	help
+	  Include support for Dave/DENX QongEVB-LITE platform. This includes
+	  specific configurations for the board and its peripherals.
+
+config MACH_ARMADILLO5X0
+	bool "Support Atmark Armadillo-500 Development Base Board"
+	select SOC_IMX31
+	select IMX_HAVE_PLATFORM_GPIO_KEYS
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IPU_CORE
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select MXC_ULPI if USB_ULPI
+	help
+	  Include support for Atmark Armadillo-500 platform. This includes
+	  specific configurations for the board and its peripherals.
+
+config MACH_KZM_ARM11_01
+	bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
+	select SOC_IMX31
+	select IMX_HAVE_PLATFORM_IMX_UART
+	help
+	  Include support for KZM-ARM11-01. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_BUG
+	bool "Support Buglabs BUGBase platform"
+	select SOC_IMX31
+	select IMX_HAVE_PLATFORM_IMX_UART
+	default y
+	help
+	  Include support for BUGBase 1.3 platform. This includes specific
+	  configurations for the board and its peripherals.
+
+comment "MX35 platforms:"
+
+config MACH_PCM043
+	bool "Support Phytec pcm043 (i.MX35) platforms"
+	select SOC_IMX35
+	select IMX_HAVE_PLATFORM_FLEXCAN
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_SSI
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IPU_CORE
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select MXC_ULPI if USB_ULPI
+	help
+	  Include support for Phytec pcm043 platform. This includes
+	  specific configurations for the board and its peripherals.
+
+config MACH_MX35_3DS
+	bool "Support MX35PDK platform"
+	select SOC_IMX35
+	select MXC_DEBUG_BOARD
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	help
+	  Include support for MX35PDK platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_EUKREA_CPUIMX35
+	bool "Support Eukrea CPUIMX35 Platform"
+	select SOC_IMX35
+	select IMX_HAVE_PLATFORM_FLEXCAN
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select MXC_ULPI if USB_ULPI
+	help
+	  Include support for Eukrea CPUIMX35 platform. This includes
+	  specific configurations for the board and its peripherals.
+
+choice
+	prompt "Baseboard"
+	depends on MACH_EUKREA_CPUIMX35
+	default MACH_EUKREA_MBIMXSD35_BASEBOARD
+
+config MACH_EUKREA_MBIMXSD35_BASEBOARD
+	bool "Eukrea MBIMXSD development board"
+	select IMX_HAVE_PLATFORM_GPIO_KEYS
+	select IMX_HAVE_PLATFORM_IMX_SSI
+	select IMX_HAVE_PLATFORM_IPU_CORE
+	help
+	  This adds board specific devices that can be found on Eukrea's
+	  MBIMXSD evaluation board.
+
+endchoice
+
+config MACH_VPR200
+	bool "Support VPR200 platform"
+	select SOC_IMX35
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_GPIO_KEYS
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IPU_CORE
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	help
+	  Include support for VPR200 platform. This includes specific
+	  configurations for the board and its peripherals.
+
+endif

arch/arm/mach-imx/Makefile

@@ -1,9 +1,3 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
 obj-$(CONFIG_IMX_HAVE_DMA_V1) += dma-v1.o
 
 obj-$(CONFIG_ARCH_MX1) += clock-imx1.o mm-imx1.o
@@ -14,18 +8,27 @@ obj-$(CONFIG_ARCH_MX25) += clock-imx25.o mm-imx25.o ehci-imx25.o
 obj-$(CONFIG_MACH_MX27) += cpu-imx27.o pm-imx27.o
 obj-$(CONFIG_MACH_MX27) += clock-imx27.o mm-imx27.o ehci-imx27.o
 
+obj-$(CONFIG_SOC_IMX31) += mm-imx31.o cpu-imx31.o clock-imx31.o iomux-imx31.o ehci-imx31.o
+obj-$(CONFIG_SOC_IMX35) += mm-imx35.o cpu-imx35.o clock-imx35.o ehci-imx35.o
+obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o
+
 # Support for CMOS sensor interface
-obj-$(CONFIG_MX1_VIDEO)	+= mx1-camera-fiq.o mx1-camera-fiq-ksym.o
+obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
 
+# i.MX1 based machines
 obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o
 obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
+obj-$(CONFIG_MACH_APF9328) += mach-apf9328.o
 
+# i.MX21 based machines
 obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
 
+# i.MX25 based machines
 obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX25) += mach-eukrea_cpuimx25.o
 obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd25-baseboard.o
 
+# i.MX27 based machines
 obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
 obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o
 obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
@@ -37,3 +40,24 @@ obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
 obj-$(CONFIG_MACH_PCA100) += mach-pca100.o
 obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o
 obj-$(CONFIG_MACH_IMX27IPCAM) += mach-imx27ipcam.o
+
+# i.MX31 based machines
+obj-$(CONFIG_MACH_MX31ADS) += mach-mx31ads.o
+obj-$(CONFIG_MACH_MX31LILLY) += mach-mx31lilly.o mx31lilly-db.o
+obj-$(CONFIG_MACH_MX31LITE) += mach-mx31lite.o mx31lite-db.o
+obj-$(CONFIG_MACH_PCM037) += mach-pcm037.o
+obj-$(CONFIG_MACH_PCM037_EET) += mach-pcm037_eet.o
+obj-$(CONFIG_MACH_MX31_3DS) += mach-mx31_3ds.o
+obj-$(CONFIG_MACH_MX31MOBOARD) += mach-mx31moboard.o mx31moboard-devboard.o \
+		mx31moboard-marxbot.o mx31moboard-smartbot.o
+obj-$(CONFIG_MACH_QONG) += mach-qong.o
+obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o
+obj-$(CONFIG_MACH_KZM_ARM11_01) += mach-kzm_arm11_01.o
+obj-$(CONFIG_MACH_BUG) += mach-bug.o
+
+# i.MX35 based machines
+obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o
+obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX35) += mach-cpuimx35.o
+obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o
+obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o

arch/arm/mach-imx/Makefile.boot

@@ -13,3 +13,7 @@ initrd_phys-$(CONFIG_ARCH_MX25)	:= 0x80800000
 zreladdr-$(CONFIG_MACH_MX27)	:= 0xA0008000
 params_phys-$(CONFIG_MACH_MX27)	:= 0xA0000100
 initrd_phys-$(CONFIG_MACH_MX27)	:= 0xA0800000
+
+zreladdr-$(CONFIG_ARCH_MX3)	:= 0x80008000
+params_phys-$(CONFIG_ARCH_MX3)	:= 0x80000100
+initrd_phys-$(CONFIG_ARCH_MX3)	:= 0x80800000

arch/arm/mach-imx/cache-l2x0.c

@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2009-2010 Pengutronix
+ * Sascha Hauer <s.hauer@pengutronix.de>
+ * Juergen Beisert <j.beisert@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+
+#include <asm/hardware/cache-l2x0.h>
+
+#include <mach/hardware.h>
+
+static int mxc_init_l2x0(void)
+{
+	void __iomem *l2x0_base;
+	void __iomem *clkctl_base;
+
+	if (!cpu_is_mx31() && !cpu_is_mx35())
+		return 0;
+
+/*
+ * First of all, we must repair broken chip settings. There are some
+ * i.MX35 CPUs in the wild, comming with bogus L2 cache settings. These
+ * misconfigured CPUs will run amok immediately when the L2 cache gets enabled.
+ * Workaraound is to setup the correct register setting prior enabling the
+ * L2 cache. This should not hurt already working CPUs, as they are using the
+ * same value.
+ */
+#define L2_MEM_VAL 0x10
+
+	clkctl_base = ioremap(MX35_CLKCTL_BASE_ADDR, 4096);
+	if (clkctl_base != NULL) {
+		writel(0x00000515, clkctl_base + L2_MEM_VAL);
+		iounmap(clkctl_base);
+	} else {
+		pr_err("L2 cache: Cannot fix timing. Trying to continue without\n");
+	}
+
+	l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096);
+	if (IS_ERR(l2x0_base)) {
+		printk(KERN_ERR "remapping L2 cache area failed with %ld\n",
+				PTR_ERR(l2x0_base));
+		return 0;
+	}
+
+	l2x0_init(l2x0_base, 0x00030024, 0x00000000);
+
+	return 0;
+}
+arch_initcall(mxc_init_l2x0);

arch/arm/mach-mx3/clock-imx31.c → arch/arm/mach-imx/clock-imx31.c

@@ -32,7 +32,7 @@
 #include <mach/mx31.h>
 #include <mach/common.h>
 
-#include "crm_regs.h"
+#include "crmregs-imx31.h"
 
 #define PRE_DIV_MIN_FREQ    10000000 /* Minimum Frequency after Predivider */
 
@@ -627,4 +627,3 @@ int __init mx31_clocks_init(unsigned long fref)
 
 	return 0;
 }
-

arch/arm/mach-mx3/clock-imx35.c → arch/arm/mach-imx/clock-imx35.c

@@ -547,4 +547,3 @@ int __init mx35_clocks_init()
 
 	return 0;
 }
-

arch/arm/mach-mx3/cpu.c → arch/arm/mach-imx/cpu-imx31.c

@@ -1,5 +1,5 @@
 /*
- * MX3 CPU type detection
+ * MX31 CPU type detection
  *
  * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
  *
@@ -17,14 +17,12 @@
 unsigned int mx31_cpu_rev;
 EXPORT_SYMBOL(mx31_cpu_rev);
 
-struct mx3_cpu_type {
+static struct {
 	u8 srev;
 	const char *name;
 	const char *v;
 	unsigned int rev;
-};
-
-static struct mx3_cpu_type mx31_cpu_type[] __initdata = {
+} mx31_cpu_type[] __initdata = {
 	{ .srev = 0x00, .name = "i.MX31(L)", .v = "1.0",  .rev = IMX_CHIP_REVISION_1_0	},
 	{ .srev = 0x10, .name = "i.MX31",    .v = "1.1",  .rev = IMX_CHIP_REVISION_1_1	},
 	{ .srev = 0x11, .name = "i.MX31L",   .v = "1.1",  .rev = IMX_CHIP_REVISION_1_1	},
@@ -57,33 +55,3 @@ void __init mx31_read_cpu_rev(void)
 
 	printk(KERN_WARNING "Unknown CPU identifier. srev = %02x\n", srev);
 }
-
-unsigned int mx35_cpu_rev;
-EXPORT_SYMBOL(mx35_cpu_rev);
-
-void __init mx35_read_cpu_rev(void)
-{
-	u32 rev;
-	char *srev;
-
-	rev = __raw_readl(MX35_IO_ADDRESS(MX35_IIM_BASE_ADDR + MXC_IIMSREV));
-	switch (rev) {
-	case 0x00:
-		mx35_cpu_rev = IMX_CHIP_REVISION_1_0;
-		srev = "1.0";
-		break;
-	case 0x10:
-		mx35_cpu_rev = IMX_CHIP_REVISION_2_0;
-		srev = "2.0";
-		break;
-	case 0x11:
-		mx35_cpu_rev = IMX_CHIP_REVISION_2_1;
-		srev = "2.1";
-		break;
-	default:
-		mx35_cpu_rev = IMX_CHIP_REVISION_UNKNOWN;
-		srev = "unknown";
-	}
-
-	printk(KERN_INFO "CPU identified as i.MX35, silicon rev %s\n", srev);
-}

arch/arm/mach-imx/cpu-imx35.c

@@ -0,0 +1,44 @@
+/*
+ * MX35 CPU type detection
+ *
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <mach/iim.h>
+
+unsigned int mx35_cpu_rev;
+EXPORT_SYMBOL(mx35_cpu_rev);
+
+void __init mx35_read_cpu_rev(void)
+{
+	u32 rev;
+	char *srev;
+
+	rev = __raw_readl(MX35_IO_ADDRESS(MX35_IIM_BASE_ADDR + MXC_IIMSREV));
+	switch (rev) {
+	case 0x00:
+		mx35_cpu_rev = IMX_CHIP_REVISION_1_0;
+		srev = "1.0";
+		break;
+	case 0x10:
+		mx35_cpu_rev = IMX_CHIP_REVISION_2_0;
+		srev = "2.0";
+		break;
+	case 0x11:
+		mx35_cpu_rev = IMX_CHIP_REVISION_2_1;
+		srev = "2.1";
+		break;
+	default:
+		mx35_cpu_rev = IMX_CHIP_REVISION_UNKNOWN;
+		srev = "unknown";
+	}
+
+	printk(KERN_INFO "CPU identified as i.MX35, silicon rev %s\n", srev);
+}

arch/arm/mach-imx/devices-imx1.h

@@ -9,21 +9,21 @@
 #include <mach/mx1.h>
 #include <mach/devices-common.h>
 
-extern const struct imx_imx_fb_data imx1_imx_fb_data __initconst;
+extern const struct imx_imx_fb_data imx1_imx_fb_data;
 #define imx1_add_imx_fb(pdata) \
     imx_add_imx_fb(&imx1_imx_fb_data, pdata)
 
-extern const struct imx_imx_i2c_data imx1_imx_i2c_data __initconst;
+extern const struct imx_imx_i2c_data imx1_imx_i2c_data;
 #define imx1_add_imx_i2c(pdata)		\
 	imx_add_imx_i2c(&imx1_imx_i2c_data, pdata)
 
-extern const struct imx_imx_uart_3irq_data imx1_imx_uart_data[] __initconst;
+extern const struct imx_imx_uart_3irq_data imx1_imx_uart_data[];
 #define imx1_add_imx_uart(id, pdata)	\
 	imx_add_imx_uart_3irq(&imx1_imx_uart_data[id], pdata)
 #define imx1_add_imx_uart0(pdata)	imx1_add_imx_uart(0, pdata)
 #define imx1_add_imx_uart1(pdata)	imx1_add_imx_uart(1, pdata)
 
-extern const struct imx_spi_imx_data imx1_cspi_data[] __initconst;
+extern const struct imx_spi_imx_data imx1_cspi_data[];
 #define imx1_add_cspi(id, pdata)   \
 	imx_add_spi_imx(&imx1_cspi_data[id], pdata)
 

arch/arm/mach-imx/devices-imx21.h

@@ -9,31 +9,31 @@
 #include <mach/mx21.h>
 #include <mach/devices-common.h>
 
-extern const struct imx_imx21_hcd_data imx21_imx21_hcd_data __initconst;
+extern const struct imx_imx21_hcd_data imx21_imx21_hcd_data;
 #define imx21_add_imx21_hcd(pdata)	\
 	imx_add_imx21_hcd(&imx21_imx21_hcd_data, pdata)
 
-extern const struct imx_imx2_wdt_data imx21_imx2_wdt_data __initconst;
+extern const struct imx_imx2_wdt_data imx21_imx2_wdt_data;
 #define imx21_add_imx2_wdt(pdata)	\
 	imx_add_imx2_wdt(&imx21_imx2_wdt_data)
 
-extern const struct imx_imx_fb_data imx21_imx_fb_data __initconst;
+extern const struct imx_imx_fb_data imx21_imx_fb_data;
 #define imx21_add_imx_fb(pdata)	\
 	imx_add_imx_fb(&imx21_imx_fb_data, pdata)
 
-extern const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst;
+extern const struct imx_imx_i2c_data imx21_imx_i2c_data;
 #define imx21_add_imx_i2c(pdata)	\
 	imx_add_imx_i2c(&imx21_imx_i2c_data, pdata)
 
-extern const struct imx_imx_keypad_data imx21_imx_keypad_data __initconst;
+extern const struct imx_imx_keypad_data imx21_imx_keypad_data;
 #define imx21_add_imx_keypad(pdata)	\
 	imx_add_imx_keypad(&imx21_imx_keypad_data, pdata)
 
-extern const struct imx_imx_ssi_data imx21_imx_ssi_data[] __initconst;
+extern const struct imx_imx_ssi_data imx21_imx_ssi_data[];
 #define imx21_add_imx_ssi(id, pdata)	\
 	imx_add_imx_ssi(&imx21_imx_ssi_data[id], pdata)
 
-extern const struct imx_imx_uart_1irq_data imx21_imx_uart_data[] __initconst;
+extern const struct imx_imx_uart_1irq_data imx21_imx_uart_data[];
 #define imx21_add_imx_uart(id, pdata)	\
 	imx_add_imx_uart_1irq(&imx21_imx_uart_data[id], pdata)
 #define imx21_add_imx_uart0(pdata)	imx21_add_imx_uart(0, pdata)
@@ -41,19 +41,19 @@ extern const struct imx_imx_uart_1irq_data imx21_imx_uart_data[] __initconst;
 #define imx21_add_imx_uart2(pdata)	imx21_add_imx_uart(2, pdata)
 #define imx21_add_imx_uart3(pdata)	imx21_add_imx_uart(3, pdata)
 
-extern const struct imx_mxc_mmc_data imx21_mxc_mmc_data[] __initconst;
+extern const struct imx_mxc_mmc_data imx21_mxc_mmc_data[];
 #define imx21_add_mxc_mmc(id, pdata)	\
 	imx_add_mxc_mmc(&imx21_mxc_mmc_data[id], pdata)
 
-extern const struct imx_mxc_nand_data imx21_mxc_nand_data __initconst;
+extern const struct imx_mxc_nand_data imx21_mxc_nand_data;
 #define imx21_add_mxc_nand(pdata)	\
 	imx_add_mxc_nand(&imx21_mxc_nand_data, pdata)
 
-extern const struct imx_mxc_w1_data imx21_mxc_w1_data __initconst;
+extern const struct imx_mxc_w1_data imx21_mxc_w1_data;
 #define imx21_add_mxc_w1(pdata)	\
 	imx_add_mxc_w1(&imx21_mxc_w1_data)
 
-extern const struct imx_spi_imx_data imx21_cspi_data[] __initconst;
+extern const struct imx_spi_imx_data imx21_cspi_data[];
 #define imx21_add_cspi(id, pdata)	\
 	imx_add_spi_imx(&imx21_cspi_data[id], pdata)
 #define imx21_add_spi_imx0(pdata)	imx21_add_cspi(0, pdata)

arch/arm/mach-imx/devices-imx25.h

@@ -9,48 +9,48 @@
 #include <mach/mx25.h>
 #include <mach/devices-common.h>
 
-extern const struct imx_fec_data imx25_fec_data __initconst;
+extern const struct imx_fec_data imx25_fec_data;
 #define imx25_add_fec(pdata)	\
 	imx_add_fec(&imx25_fec_data, pdata)
 
-extern const struct imx_flexcan_data imx25_flexcan_data[] __initconst;
+extern const struct imx_flexcan_data imx25_flexcan_data[];
 #define imx25_add_flexcan(id, pdata)	\
 	imx_add_flexcan(&imx25_flexcan_data[id], pdata)
 #define imx25_add_flexcan0(pdata)	imx25_add_flexcan(0, pdata)
 #define imx25_add_flexcan1(pdata)	imx25_add_flexcan(1, pdata)
 
-extern const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data __initconst;
+extern const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data;
 #define imx25_add_fsl_usb2_udc(pdata)	\
 	imx_add_fsl_usb2_udc(&imx25_fsl_usb2_udc_data, pdata)
 
-extern struct imx_imxdi_rtc_data imx25_imxdi_rtc_data __initconst;
+extern struct imx_imxdi_rtc_data imx25_imxdi_rtc_data;
 #define imx25_add_imxdi_rtc(pdata)	\
 	imx_add_imxdi_rtc(&imx25_imxdi_rtc_data)
 
-extern const struct imx_imx2_wdt_data imx25_imx2_wdt_data __initconst;
+extern const struct imx_imx2_wdt_data imx25_imx2_wdt_data;
 #define imx25_add_imx2_wdt(pdata)	\
 	imx_add_imx2_wdt(&imx25_imx2_wdt_data)
 
-extern const struct imx_imx_fb_data imx25_imx_fb_data __initconst;
+extern const struct imx_imx_fb_data imx25_imx_fb_data;
 #define imx25_add_imx_fb(pdata)	\
 	imx_add_imx_fb(&imx25_imx_fb_data, pdata)
 
-extern const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst;
+extern const struct imx_imx_i2c_data imx25_imx_i2c_data[];
 #define imx25_add_imx_i2c(id, pdata)	\
 	imx_add_imx_i2c(&imx25_imx_i2c_data[id], pdata)
 #define imx25_add_imx_i2c0(pdata)	imx25_add_imx_i2c(0, pdata)
 #define imx25_add_imx_i2c1(pdata)	imx25_add_imx_i2c(1, pdata)
 #define imx25_add_imx_i2c2(pdata)	imx25_add_imx_i2c(2, pdata)
 
-extern const struct imx_imx_keypad_data imx25_imx_keypad_data __initconst;
+extern const struct imx_imx_keypad_data imx25_imx_keypad_data;
 #define imx25_add_imx_keypad(pdata)	\
 	imx_add_imx_keypad(&imx25_imx_keypad_data, pdata)
 
-extern const struct imx_imx_ssi_data imx25_imx_ssi_data[] __initconst;
+extern const struct imx_imx_ssi_data imx25_imx_ssi_data[];
 #define imx25_add_imx_ssi(id, pdata)	\
 	imx_add_imx_ssi(&imx25_imx_ssi_data[id], pdata)
 
-extern const struct imx_imx_uart_1irq_data imx25_imx_uart_data[] __initconst;
+extern const struct imx_imx_uart_1irq_data imx25_imx_uart_data[];
 #define imx25_add_imx_uart(id, pdata)	\
 	imx_add_imx_uart_1irq(&imx25_imx_uart_data[id], pdata)
 #define imx25_add_imx_uart0(pdata)	imx25_add_imx_uart(0, pdata)
@@ -59,33 +59,32 @@ extern const struct imx_imx_uart_1irq_data imx25_imx_uart_data[] __initconst;
 #define imx25_add_imx_uart3(pdata)	imx25_add_imx_uart(3, pdata)
 #define imx25_add_imx_uart4(pdata)	imx25_add_imx_uart(4, pdata)
 
-extern const struct imx_mx2_camera_data imx25_mx2_camera_data __initconst;
+extern const struct imx_mx2_camera_data imx25_mx2_camera_data;
 #define imx25_add_mx2_camera(pdata)	\
 	imx_add_mx2_camera(&imx25_mx2_camera_data, pdata)
 
-extern const struct imx_mxc_ehci_data imx25_mxc_ehci_otg_data __initconst;
+extern const struct imx_mxc_ehci_data imx25_mxc_ehci_otg_data;
 #define imx25_add_mxc_ehci_otg(pdata)	\
 	imx_add_mxc_ehci(&imx25_mxc_ehci_otg_data, pdata)
-extern const struct imx_mxc_ehci_data imx25_mxc_ehci_hs_data __initconst;
+extern const struct imx_mxc_ehci_data imx25_mxc_ehci_hs_data;
 #define imx25_add_mxc_ehci_hs(pdata)	\
 	imx_add_mxc_ehci(&imx25_mxc_ehci_hs_data, pdata)
 
-extern const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst;
+extern const struct imx_mxc_nand_data imx25_mxc_nand_data;
 #define imx25_add_mxc_nand(pdata)	\
 	imx_add_mxc_nand(&imx25_mxc_nand_data, pdata)
 
-extern const struct imx_sdhci_esdhc_imx_data
-imx25_sdhci_esdhc_imx_data[] __initconst;
+extern const struct imx_sdhci_esdhc_imx_data imx25_sdhci_esdhc_imx_data[];
 #define imx25_add_sdhci_esdhc_imx(id, pdata)	\
 	imx_add_sdhci_esdhc_imx(&imx25_sdhci_esdhc_imx_data[id], pdata)
 
-extern const struct imx_spi_imx_data imx25_cspi_data[] __initconst;
+extern const struct imx_spi_imx_data imx25_cspi_data[];
 #define imx25_add_spi_imx(id, pdata)	\
 	imx_add_spi_imx(&imx25_cspi_data[id], pdata)
 #define imx25_add_spi_imx0(pdata)	imx25_add_spi_imx(0, pdata)
 #define imx25_add_spi_imx1(pdata)	imx25_add_spi_imx(1, pdata)
 #define imx25_add_spi_imx2(pdata)	imx25_add_spi_imx(2, pdata)
 
-extern struct imx_mxc_pwm_data imx25_mxc_pwm_data[] __initconst;
+extern struct imx_mxc_pwm_data imx25_mxc_pwm_data[];
 #define imx25_add_mxc_pwm(id)	\
 	imx_add_mxc_pwm(&imx25_mxc_pwm_data[id])

arch/arm/mach-imx/devices-imx27.h

@@ -9,35 +9,35 @@
 #include <mach/mx27.h>
 #include <mach/devices-common.h>
 
-extern const struct imx_fec_data imx27_fec_data __initconst;
+extern const struct imx_fec_data imx27_fec_data;
 #define imx27_add_fec(pdata)	\
 	imx_add_fec(&imx27_fec_data, pdata)
 
-extern const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst;
+extern const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data;
 #define imx27_add_fsl_usb2_udc(pdata)	\
 	imx_add_fsl_usb2_udc(&imx27_fsl_usb2_udc_data, pdata)
 
-extern const struct imx_imx2_wdt_data imx27_imx2_wdt_data __initconst;
+extern const struct imx_imx2_wdt_data imx27_imx2_wdt_data;
 #define imx27_add_imx2_wdt(pdata)	\
 	imx_add_imx2_wdt(&imx27_imx2_wdt_data)
 
-extern const struct imx_imx_fb_data imx27_imx_fb_data __initconst;
+extern const struct imx_imx_fb_data imx27_imx_fb_data;
 #define imx27_add_imx_fb(pdata)	\
 	imx_add_imx_fb(&imx27_imx_fb_data, pdata)
 
-extern const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst;
+extern const struct imx_imx_i2c_data imx27_imx_i2c_data[];
 #define imx27_add_imx_i2c(id, pdata)	\
 	imx_add_imx_i2c(&imx27_imx_i2c_data[id], pdata)
 
-extern const struct imx_imx_keypad_data imx27_imx_keypad_data __initconst;
+extern const struct imx_imx_keypad_data imx27_imx_keypad_data;
 #define imx27_add_imx_keypad(pdata)	\
 	imx_add_imx_keypad(&imx27_imx_keypad_data, pdata)
 
-extern const struct imx_imx_ssi_data imx27_imx_ssi_data[] __initconst;
+extern const struct imx_imx_ssi_data imx27_imx_ssi_data[];
 #define imx27_add_imx_ssi(id, pdata)    \
 	imx_add_imx_ssi(&imx27_imx_ssi_data[id], pdata)
 
-extern const struct imx_imx_uart_1irq_data imx27_imx_uart_data[] __initconst;
+extern const struct imx_imx_uart_1irq_data imx27_imx_uart_data[];
 #define imx27_add_imx_uart(id, pdata)	\
 	imx_add_imx_uart_1irq(&imx27_imx_uart_data[id], pdata)
 #define imx27_add_imx_uart0(pdata)	imx27_add_imx_uart(0, pdata)
@@ -47,30 +47,30 @@ extern const struct imx_imx_uart_1irq_data imx27_imx_uart_data[] __initconst;
 #define imx27_add_imx_uart4(pdata)	imx27_add_imx_uart(4, pdata)
 #define imx27_add_imx_uart5(pdata)	imx27_add_imx_uart(5, pdata)
 
-extern const struct imx_mx2_camera_data imx27_mx2_camera_data __initconst;
+extern const struct imx_mx2_camera_data imx27_mx2_camera_data;
 #define imx27_add_mx2_camera(pdata)	\
 	imx_add_mx2_camera(&imx27_mx2_camera_data, pdata)
 
-extern const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data __initconst;
+extern const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data;
 #define imx27_add_mxc_ehci_otg(pdata)	\
 	imx_add_mxc_ehci(&imx27_mxc_ehci_otg_data, pdata)
-extern const struct imx_mxc_ehci_data imx27_mxc_ehci_hs_data[] __initconst;
+extern const struct imx_mxc_ehci_data imx27_mxc_ehci_hs_data[];
 #define imx27_add_mxc_ehci_hs(id, pdata)	\
 	imx_add_mxc_ehci(&imx27_mxc_ehci_hs_data[id - 1], pdata)
 
-extern const struct imx_mxc_mmc_data imx27_mxc_mmc_data[] __initconst;
+extern const struct imx_mxc_mmc_data imx27_mxc_mmc_data[];
 #define imx27_add_mxc_mmc(id, pdata)	\
 	imx_add_mxc_mmc(&imx27_mxc_mmc_data[id], pdata)
 
-extern const struct imx_mxc_nand_data imx27_mxc_nand_data __initconst;
+extern const struct imx_mxc_nand_data imx27_mxc_nand_data;
 #define imx27_add_mxc_nand(pdata)	\
 	imx_add_mxc_nand(&imx27_mxc_nand_data, pdata)
 
-extern const struct imx_mxc_w1_data imx27_mxc_w1_data __initconst;
+extern const struct imx_mxc_w1_data imx27_mxc_w1_data;
 #define imx27_add_mxc_w1(pdata)	\
 	imx_add_mxc_w1(&imx27_mxc_w1_data)
 
-extern const struct imx_spi_imx_data imx27_cspi_data[] __initconst;
+extern const struct imx_spi_imx_data imx27_cspi_data[];
 #define imx27_add_cspi(id, pdata)	\
 	imx_add_spi_imx(&imx27_cspi_data[id], pdata)
 #define imx27_add_spi_imx0(pdata)	imx27_add_cspi(0, pdata)

arch/arm/mach-mx3/devices-imx31.h → arch/arm/mach-imx/devices-imx31.h

@@ -9,30 +9,30 @@
 #include <mach/mx31.h>
 #include <mach/devices-common.h>
 
-extern const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data __initconst;
+extern const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data;
 #define imx31_add_fsl_usb2_udc(pdata)	\
 	imx_add_fsl_usb2_udc(&imx31_fsl_usb2_udc_data, pdata)
 
-extern const struct imx_imx2_wdt_data imx31_imx2_wdt_data __initconst;
+extern const struct imx_imx2_wdt_data imx31_imx2_wdt_data;
 #define imx31_add_imx2_wdt(pdata)       \
 	imx_add_imx2_wdt(&imx31_imx2_wdt_data)
 
-extern const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst;
+extern const struct imx_imx_i2c_data imx31_imx_i2c_data[];
 #define imx31_add_imx_i2c(id, pdata)	\
 	imx_add_imx_i2c(&imx31_imx_i2c_data[id], pdata)
 #define imx31_add_imx_i2c0(pdata)	imx31_add_imx_i2c(0, pdata)
 #define imx31_add_imx_i2c1(pdata)	imx31_add_imx_i2c(1, pdata)
 #define imx31_add_imx_i2c2(pdata)	imx31_add_imx_i2c(2, pdata)
 
-extern const struct imx_imx_keypad_data imx31_imx_keypad_data __initconst;
+extern const struct imx_imx_keypad_data imx31_imx_keypad_data;
 #define imx31_add_imx_keypad(pdata)	\
 	imx_add_imx_keypad(&imx31_imx_keypad_data, pdata)
 
-extern const struct imx_imx_ssi_data imx31_imx_ssi_data[] __initconst;
+extern const struct imx_imx_ssi_data imx31_imx_ssi_data[];
 #define imx31_add_imx_ssi(id, pdata)    \
 	imx_add_imx_ssi(&imx31_imx_ssi_data[id], pdata)
 
-extern const struct imx_imx_uart_1irq_data imx31_imx_uart_data[] __initconst;
+extern const struct imx_imx_uart_1irq_data imx31_imx_uart_data[];
 #define imx31_add_imx_uart(id, pdata)	\
 	imx_add_imx_uart_1irq(&imx31_imx_uart_data[id], pdata)
 #define imx31_add_imx_uart0(pdata)	imx31_add_imx_uart(0, pdata)
@@ -41,26 +41,38 @@ extern const struct imx_imx_uart_1irq_data imx31_imx_uart_data[] __initconst;
 #define imx31_add_imx_uart3(pdata)	imx31_add_imx_uart(3, pdata)
 #define imx31_add_imx_uart4(pdata)	imx31_add_imx_uart(4, pdata)
 
-extern const struct imx_mxc_ehci_data imx31_mxc_ehci_otg_data __initconst;
+extern const struct imx_ipu_core_data imx31_ipu_core_data;
+#define imx31_add_ipu_core(pdata)	\
+	imx_add_ipu_core(&imx31_ipu_core_data, pdata)
+#define imx31_alloc_mx3_camera(pdata)	\
+	imx_alloc_mx3_camera(&imx31_ipu_core_data, pdata)
+#define imx31_add_mx3_sdc_fb(pdata)	\
+	imx_add_mx3_sdc_fb(&imx31_ipu_core_data, pdata)
+
+extern const struct imx_mxc_ehci_data imx31_mxc_ehci_otg_data;
 #define imx31_add_mxc_ehci_otg(pdata)	\
 	imx_add_mxc_ehci(&imx31_mxc_ehci_otg_data, pdata)
-extern const struct imx_mxc_ehci_data imx31_mxc_ehci_hs_data[] __initconst;
+extern const struct imx_mxc_ehci_data imx31_mxc_ehci_hs_data[];
 #define imx31_add_mxc_ehci_hs(id, pdata)	\
 	imx_add_mxc_ehci(&imx31_mxc_ehci_hs_data[id - 1], pdata)
 
-extern const struct imx_mxc_mmc_data imx31_mxc_mmc_data[] __initconst;
+extern const struct imx_mxc_mmc_data imx31_mxc_mmc_data[];
 #define imx31_add_mxc_mmc(id, pdata)	\
 	imx_add_mxc_mmc(&imx31_mxc_mmc_data[id], pdata)
 
-extern const struct imx_mxc_nand_data imx31_mxc_nand_data __initconst;
+extern const struct imx_mxc_nand_data imx31_mxc_nand_data;
 #define imx31_add_mxc_nand(pdata)	\
 	imx_add_mxc_nand(&imx31_mxc_nand_data, pdata)
 
-extern const struct imx_mxc_w1_data imx31_mxc_w1_data __initconst;
+extern const struct imx_mxc_rtc_data imx31_mxc_rtc_data;
+#define imx31_add_mxc_rtc(pdata)	\
+	imx_add_mxc_rtc(&imx31_mxc_rtc_data)
+
+extern const struct imx_mxc_w1_data imx31_mxc_w1_data;
 #define imx31_add_mxc_w1(pdata)	\
 	imx_add_mxc_w1(&imx31_mxc_w1_data)
 
-extern const struct imx_spi_imx_data imx31_cspi_data[] __initconst;
+extern const struct imx_spi_imx_data imx31_cspi_data[];
 #define imx31_add_cspi(id, pdata)	\
 	imx_add_spi_imx(&imx31_cspi_data[id], pdata)
 #define imx31_add_spi_imx0(pdata)	imx31_add_cspi(0, pdata)

arch/arm/mach-mx3/devices-imx35.h → arch/arm/mach-imx/devices-imx35.h

@@ -9,67 +9,74 @@
 #include <mach/mx35.h>
 #include <mach/devices-common.h>
 
-extern const struct imx_fec_data imx35_fec_data __initconst;
+extern const struct imx_fec_data imx35_fec_data;
 #define imx35_add_fec(pdata)	\
 	imx_add_fec(&imx35_fec_data, pdata)
 
-extern const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data __initconst;
+extern const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data;
 #define imx35_add_fsl_usb2_udc(pdata)	\
 	imx_add_fsl_usb2_udc(&imx35_fsl_usb2_udc_data, pdata)
 
-extern const struct imx_flexcan_data imx35_flexcan_data[] __initconst;
+extern const struct imx_flexcan_data imx35_flexcan_data[];
 #define imx35_add_flexcan(id, pdata)	\
 	imx_add_flexcan(&imx35_flexcan_data[id], pdata)
 #define imx35_add_flexcan0(pdata)	imx35_add_flexcan(0, pdata)
 #define imx35_add_flexcan1(pdata)	imx35_add_flexcan(1, pdata)
 
-extern const struct imx_imx2_wdt_data imx35_imx2_wdt_data __initconst;
+extern const struct imx_imx2_wdt_data imx35_imx2_wdt_data;
 #define imx35_add_imx2_wdt(pdata)       \
 	imx_add_imx2_wdt(&imx35_imx2_wdt_data)
 
-extern const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst;
+extern const struct imx_imx_i2c_data imx35_imx_i2c_data[];
 #define imx35_add_imx_i2c(id, pdata)	\
 	imx_add_imx_i2c(&imx35_imx_i2c_data[id], pdata)
 #define imx35_add_imx_i2c0(pdata)	imx35_add_imx_i2c(0, pdata)
 #define imx35_add_imx_i2c1(pdata)	imx35_add_imx_i2c(1, pdata)
 #define imx35_add_imx_i2c2(pdata)	imx35_add_imx_i2c(2, pdata)
 
-extern const struct imx_imx_keypad_data imx35_imx_keypad_data __initconst;
+extern const struct imx_imx_keypad_data imx35_imx_keypad_data;
 #define imx35_add_imx_keypad(pdata)	\
 	imx_add_imx_keypad(&imx35_imx_keypad_data, pdata)
 
-extern const struct imx_imx_ssi_data imx35_imx_ssi_data[] __initconst;
+extern const struct imx_imx_ssi_data imx35_imx_ssi_data[];
 #define imx35_add_imx_ssi(id, pdata)    \
 	imx_add_imx_ssi(&imx35_imx_ssi_data[id], pdata)
 
-extern const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst;
+extern const struct imx_imx_uart_1irq_data imx35_imx_uart_data[];
 #define imx35_add_imx_uart(id, pdata)	\
 	imx_add_imx_uart_1irq(&imx35_imx_uart_data[id], pdata)
 #define imx35_add_imx_uart0(pdata)	imx35_add_imx_uart(0, pdata)
 #define imx35_add_imx_uart1(pdata)	imx35_add_imx_uart(1, pdata)
 #define imx35_add_imx_uart2(pdata)	imx35_add_imx_uart(2, pdata)
 
-extern const struct imx_mxc_ehci_data imx35_mxc_ehci_otg_data __initconst;
+extern const struct imx_ipu_core_data imx35_ipu_core_data;
+#define imx35_add_ipu_core(pdata)	\
+	imx_add_ipu_core(&imx35_ipu_core_data, pdata)
+#define imx35_alloc_mx3_camera(pdata)	\
+	imx_alloc_mx3_camera(&imx35_ipu_core_data, pdata)
+#define imx35_add_mx3_sdc_fb(pdata)	\
+	imx_add_mx3_sdc_fb(&imx35_ipu_core_data, pdata)
+
+extern const struct imx_mxc_ehci_data imx35_mxc_ehci_otg_data;
 #define imx35_add_mxc_ehci_otg(pdata)	\
 	imx_add_mxc_ehci(&imx35_mxc_ehci_otg_data, pdata)
-extern const struct imx_mxc_ehci_data imx35_mxc_ehci_hs_data __initconst;
+extern const struct imx_mxc_ehci_data imx35_mxc_ehci_hs_data;
 #define imx35_add_mxc_ehci_hs(pdata)	\
 	imx_add_mxc_ehci(&imx35_mxc_ehci_hs_data, pdata)
 
-extern const struct imx_mxc_nand_data imx35_mxc_nand_data __initconst;
+extern const struct imx_mxc_nand_data imx35_mxc_nand_data;
 #define imx35_add_mxc_nand(pdata)	\
 	imx_add_mxc_nand(&imx35_mxc_nand_data, pdata)
 
-extern const struct imx_mxc_w1_data imx35_mxc_w1_data __initconst;
+extern const struct imx_mxc_w1_data imx35_mxc_w1_data;
 #define imx35_add_mxc_w1(pdata)	\
 	imx_add_mxc_w1(&imx35_mxc_w1_data)
 
-extern const struct imx_sdhci_esdhc_imx_data
-imx35_sdhci_esdhc_imx_data[] __initconst;
+extern const struct imx_sdhci_esdhc_imx_data imx35_sdhci_esdhc_imx_data[];
 #define imx35_add_sdhci_esdhc_imx(id, pdata)	\
 	imx_add_sdhci_esdhc_imx(&imx35_sdhci_esdhc_imx_data[id], pdata)
 
-extern const struct imx_spi_imx_data imx35_cspi_data[] __initconst;
+extern const struct imx_spi_imx_data imx35_cspi_data[];
 #define imx35_add_cspi(id, pdata)	\
 	imx_add_spi_imx(&imx35_cspi_data[id], pdata)
 #define imx35_add_spi_imx0(pdata)	imx35_add_cspi(0, pdata)

arch/arm/mach-mx3/ehci-imx31.c → arch/arm/mach-imx/ehci-imx31.c

@@ -80,4 +80,3 @@ int mx31_initialize_usb_hw(int port, unsigned int flags)
 
 	return 0;
 }
-

arch/arm/mach-mx3/ehci-imx35.c → arch/arm/mach-imx/ehci-imx35.c

@@ -77,4 +77,3 @@ int mx35_initialize_usb_hw(int port, unsigned int flags)
 
 	return 0;
 }
-

arch/arm/mach-imx/eukrea_mbimx27-baseboard.c

@@ -32,7 +32,6 @@
 #include <mach/common.h>
 #include <mach/iomux-mx27.h>
 #include <mach/hardware.h>
-#include <mach/spi.h>
 #include <mach/audmux.h>
 
 #include "devices-imx27.h"

arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c

@@ -22,7 +22,6 @@
 #include <linux/gpio.h>
 #include <linux/leds.h>
 #include <linux/platform_device.h>
-#include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <video/platform_lcd.h>
 
@@ -32,9 +31,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/mx25.h>
-#include <mach/imx-uart.h>
 #include <mach/audmux.h>
-#include <mach/esdhc.h>
 
 #include "devices-imx25.h"
 
@@ -208,23 +205,14 @@ static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
 	},
 };
 
-static struct gpio_keys_platform_data eukrea_mbimxsd_button_data = {
+static const struct gpio_keys_platform_data
+		eukrea_mbimxsd_button_data __initconst = {
 	.buttons	= eukrea_mbimxsd_gpio_buttons,
 	.nbuttons	= ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
 };
 
-static struct platform_device eukrea_mbimxsd_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &eukrea_mbimxsd_button_data,
-	}
-};
-
 static struct platform_device *platform_devices[] __initdata = {
 	&eukrea_mbimxsd_leds_gpio,
-	&eukrea_mbimxsd_button_device,
 	&eukrea_mbimxsd_lcd_powerdev,
 };
 
@@ -299,4 +287,5 @@ void __init eukrea_mbimxsd25_baseboard_init(void)
 				ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
 
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+	imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
 }

arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c → arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c

@@ -26,7 +26,6 @@
 #include <linux/interrupt.h>
 #include <linux/leds.h>
 #include <linux/platform_device.h>
-#include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <video/platform_lcd.h>
 #include <linux/i2c.h>
@@ -38,15 +37,10 @@
 
 #include <mach/hardware.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx35.h>
-#include <mach/ipu.h>
-#include <mach/mx3fb.h>
 #include <mach/audmux.h>
-#include <mach/esdhc.h>
 
 #include "devices-imx35.h"
-#include "devices.h"
 
 static const struct fb_videomode fb_modedb[] = {
 	{
@@ -101,12 +95,11 @@ static const struct fb_videomode fb_modedb[] = {
 	},
 };
 
-static struct ipu_platform_data mx3_ipu_data = {
+static const struct ipu_platform_data mx3_ipu_data __initconst = {
 	.irq_base = MXC_IPU_IRQ_START,
 };
 
-static struct mx3fb_platform_data mx3fb_pdata = {
-	.dma_dev	= &mx3_ipu.dev,
+static struct mx3fb_platform_data mx3fb_pdata __initdata = {
 	.name		= "CMO-QVGA",
 	.mode		= fb_modedb,
 	.num_modes	= ARRAY_SIZE(fb_modedb),
@@ -223,23 +216,14 @@ static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
 	},
 };
 
-static struct gpio_keys_platform_data eukrea_mbimxsd_button_data = {
+static const struct gpio_keys_platform_data
+		eukrea_mbimxsd_button_data __initconst = {
 	.buttons	= eukrea_mbimxsd_gpio_buttons,
 	.nbuttons	= ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
 };
 
-static struct platform_device eukrea_mbimxsd_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &eukrea_mbimxsd_button_data,
-	}
-};
-
 static struct platform_device *platform_devices[] __initdata = {
 	&eukrea_mbimxsd_leds_gpio,
-	&eukrea_mbimxsd_button_device,
 	&eukrea_mbimxsd_lcd_powerdev,
 };
 
@@ -292,8 +276,8 @@ void __init eukrea_mbimxsd35_baseboard_init(void)
 #endif
 
 	imx35_add_imx_uart1(&uart_pdata);
-	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
-	mxc_register_device(&mx3_fb, &mx3fb_pdata);
+	imx35_add_ipu_core(&mx3_ipu_data);
+	imx35_add_mx3_sdc_fb(&mx3fb_pdata);
 
 	imx35_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
 
@@ -315,4 +299,5 @@ void __init eukrea_mbimxsd35_baseboard_init(void)
 				ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
 
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+	imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
 }

arch/arm/mach-imx/mach-apf9328.c

@@ -0,0 +1,144 @@
+/*
+ * linux/arch/arm/mach-imx/mach-apf9328.c
+ *
+ * Copyright (c) 2005-2011 ARMadeus systems <support@armadeus.com>
+ *
+ * This work is based on mach-scb9328.c which is:
+ * Copyright (c) 2004 Sascha Hauer <saschahauer@web.de>
+ * Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/dm9000.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/iomux-mx1.h>
+
+#include "devices-imx1.h"
+
+static const int apf9328_pins[] __initconst = {
+	/* UART1 */
+	PC9_PF_UART1_CTS,
+	PC10_PF_UART1_RTS,
+	PC11_PF_UART1_TXD,
+	PC12_PF_UART1_RXD,
+	/* UART2 */
+	PB28_PF_UART2_CTS,
+	PB29_PF_UART2_RTS,
+	PB30_PF_UART2_TXD,
+	PB31_PF_UART2_RXD,
+};
+
+/*
+ * The APF9328 can have up to 32MB NOR Flash
+ */
+static struct resource flash_resource = {
+	.start	= MX1_CS0_PHYS,
+	.end	= MX1_CS0_PHYS + SZ_32M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct physmap_flash_data apf9328_flash_data = {
+	.width  = 2,
+};
+
+static struct platform_device apf9328_flash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev = {
+		.platform_data = &apf9328_flash_data,
+	},
+	.resource = &flash_resource,
+	.num_resources = 1,
+};
+
+/*
+ * APF9328 has a DM9000 Ethernet controller
+ */
+static struct dm9000_plat_data dm9000_setup = {
+	.flags          = DM9000_PLATF_16BITONLY
+};
+
+static struct resource dm9000_resources[] = {
+	{
+		.start  = MX1_CS4_PHYS + 0x00C00000,
+		.end    = MX1_CS4_PHYS + 0x00C00001,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = MX1_CS4_PHYS + 0x00C00002,
+		.end    = MX1_CS4_PHYS + 0x00C00003,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = IRQ_GPIOB(14),
+		.end    = IRQ_GPIOB(14),
+		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct platform_device dm9000x_device = {
+	.name		= "dm9000",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(dm9000_resources),
+	.resource	= dm9000_resources,
+	.dev		= {
+		.platform_data = &dm9000_setup,
+	}
+};
+
+/* --- SERIAL RESSOURCE --- */
+static const struct imxuart_platform_data uart0_pdata __initconst = {
+	.flags = 0,
+};
+
+static const struct imxuart_platform_data uart1_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&apf9328_flash_device,
+	&dm9000x_device,
+};
+
+static void __init apf9328_init(void)
+{
+	mxc_gpio_setup_multiple_pins(apf9328_pins,
+			ARRAY_SIZE(apf9328_pins),
+			"APF9328");
+
+	imx1_add_imx_uart0(&uart0_pdata);
+	imx1_add_imx_uart1(&uart1_pdata);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init apf9328_timer_init(void)
+{
+	mx1_clocks_init(32768);
+}
+
+static struct sys_timer apf9328_timer = {
+	.init	= apf9328_timer_init,
+};
+
+MACHINE_START(APF9328, "Armadeus APF9328")
+	/* Maintainer: Gwenhael Goavec-Merou, ARMadeus Systems */
+	.map_io       = mx1_map_io,
+	.init_early   = imx1_init_early,
+	.init_irq     = mx1_init_irq,
+	.timer        = &apf9328_timer,
+	.init_machine = apf9328_init,
+MACHINE_END

arch/arm/mach-mx3/mach-armadillo5x0.c → arch/arm/mach-imx/mach-armadillo5x0.c

@@ -34,7 +34,6 @@
 #include <linux/mtd/physmap.h>
 #include <linux/io.h>
 #include <linux/input.h>
-#include <linux/gpio_keys.h>
 #include <linux/i2c.h>
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
@@ -49,13 +48,10 @@
 
 #include <mach/common.h>
 #include <mach/iomux-mx3.h>
-#include <mach/ipu.h>
-#include <mach/mx3fb.h>
 #include <mach/ulpi.h>
 
 #include "devices-imx31.h"
-#include "devices.h"
-#include "crm_regs.h"
+#include "crmregs-imx31.h"
 
 static int armadillo5x0_pins[] = {
 	/* UART1 */
@@ -280,20 +276,12 @@ static struct gpio_keys_button armadillo5x0_buttons[] = {
 	}
 };
 
-static struct gpio_keys_platform_data armadillo5x0_button_data = {
+static const struct gpio_keys_platform_data
+		armadillo5x0_button_data __initconst = {
 	.buttons	= armadillo5x0_buttons,
 	.nbuttons	= ARRAY_SIZE(armadillo5x0_buttons),
 };
 
-static struct platform_device armadillo5x0_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &armadillo5x0_button_data,
-	}
-};
-
 /*
  * NAND Flash
  */
@@ -383,12 +371,11 @@ static const struct fb_videomode fb_modedb[] = {
 	},
 };
 
-static struct ipu_platform_data mx3_ipu_data = {
+static const struct ipu_platform_data mx3_ipu_data __initconst = {
 	.irq_base = MXC_IPU_IRQ_START,
 };
 
-static struct mx3fb_platform_data mx3fb_pdata = {
-	.dma_dev	= &mx3_ipu.dev,
+static struct mx3fb_platform_data mx3fb_pdata __initdata = {
 	.name		= "CRT-VGA",
 	.mode		= fb_modedb,
 	.num_modes	= ARRAY_SIZE(fb_modedb),
@@ -496,7 +483,6 @@ static const struct imxuart_platform_data uart_pdata __initconst = {
 
 static struct platform_device *devices[] __initdata = {
 	&armadillo5x0_smc911x_device,
-	&armadillo5x0_button_device,
 };
 
 /*
@@ -508,6 +494,7 @@ static void __init armadillo5x0_init(void)
 			ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0");
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
+	imx_add_gpio_keys(&armadillo5x0_button_data);
 	imx31_add_imx_i2c1(NULL);
 
 	/* Register UART */
@@ -521,8 +508,8 @@ static void __init armadillo5x0_init(void)
 	imx31_add_mxc_mmc(0, &sdhc_pdata);
 
 	/* Register FB */
-	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
-	mxc_register_device(&mx3_fb, &mx3fb_pdata);
+	imx31_add_ipu_core(&mx3_ipu_data);
+	imx31_add_mx3_sdc_fb(&mx3fb_pdata);
 
 	/* Register NOR Flash */
 	mxc_register_device(&armadillo5x0_nor_flash,

arch/arm/mach-mx3/mach-bug.c → arch/arm/mach-imx/mach-bug.c

@@ -20,7 +20,6 @@
 #include <linux/platform_device.h>
 
 #include <mach/iomux-mx3.h>
-#include <mach/imx-uart.h>
 #include <mach/hardware.h>
 #include <mach/common.h>
 

arch/arm/mach-imx/mach-cpuimx27.c

@@ -38,7 +38,6 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/iomux-mx27.h>
-#include <mach/mxc_nand.h>
 #include <mach/ulpi.h>
 
 #include "devices-imx27.h"

arch/arm/mach-mx3/mach-cpuimx35.c → arch/arm/mach-imx/mach-cpuimx35.c

@@ -41,10 +41,8 @@
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/iomux-mx35.h>
-#include <mach/mxc_nand.h>
 
 #include "devices-imx35.h"
-#include "devices.h"
 
 static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,

arch/arm/mach-imx/mach-eukrea_cpuimx25.c

@@ -36,8 +36,6 @@
 #include <asm/mach/map.h>
 #include <mach/common.h>
 #include <mach/mx25.h>
-#include <mach/mxc_nand.h>
-#include <mach/imxfb.h>
 #include <mach/iomux-mx25.h>
 
 #include "devices-imx25.h"

arch/arm/mach-imx/mach-imx27_visstrim_m10.c

@@ -27,7 +27,6 @@
 #include <linux/mtd/physmap.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pca953x.h>
-#include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
 #include <linux/delay.h>
@@ -130,19 +129,12 @@ static struct gpio_keys_button visstrim_gpio_keys[] = {
 	}
 };
 
-static struct gpio_keys_platform_data visstrim_gpio_keys_platform_data = {
+static const struct gpio_keys_platform_data
+		visstrim_gpio_keys_platform_data __initconst = {
 	.buttons	= visstrim_gpio_keys,
 	.nbuttons	= ARRAY_SIZE(visstrim_gpio_keys),
 };
 
-static struct platform_device visstrim_gpio_keys_device = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &visstrim_gpio_keys_platform_data,
-	},
-};
-
 /* Visstrim_SM10 has a microSD slot connected to sdhc1 */
 static int visstrim_m10_sdhc1_init(struct device *dev,
 		irq_handler_t detect_irq, void *data)
@@ -186,7 +178,6 @@ static struct platform_device visstrim_m10_nor_mtd_device = {
 };
 
 static struct platform_device *platform_devices[] __initdata = {
-	&visstrim_gpio_keys_device,
 	&visstrim_m10_nor_mtd_device,
 };
 
@@ -255,6 +246,7 @@ static void __init visstrim_m10_board_init(void)
 	imx27_add_mxc_mmc(0, &visstrim_m10_sdhc_pdata);
 	imx27_add_mxc_ehci_otg(&visstrim_m10_usbotg_pdata);
 	imx27_add_fec(NULL);
+	imx_add_gpio_keys(&visstrim_gpio_keys_platform_data);
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 }
 

arch/arm/mach-mx3/mach-kzm_arm11_01.c → arch/arm/mach-imx/mach-kzm_arm11_01.c

@@ -39,7 +39,6 @@
 #include <mach/iomux-mx3.h>
 
 #include "devices-imx31.h"
-#include "devices.h"
 
 #define KZM_ARM11_IO_ADDRESS(x) (IOMEM(					\
 	IMX_IO_P2V_MODULE(x, MX31_CS4) ?:				\

arch/arm/mach-imx/mach-mx1ads.c

@@ -25,7 +25,6 @@
 
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/i2c.h>
 #include <mach/iomux-mx1.h>
 #include <mach/irqs.h>
 

arch/arm/mach-imx/mach-mx21ads.c

@@ -25,7 +25,6 @@
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
 #include <mach/iomux-mx21.h>
-#include <mach/mxc_nand.h>
 
 #include "devices-imx21.h"
 

arch/arm/mach-imx/mach-mx25_3ds.c

@@ -29,7 +29,6 @@
 #include <linux/irq.h>
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
-#include <linux/input/matrix_keypad.h>
 #include <linux/usb/otg.h>
 
 #include <mach/hardware.h>
@@ -103,6 +102,8 @@ static iomux_v3_cfg_t mx25pdk_pads[] = {
 	MX25_PAD_SD1_DATA1__SD1_DATA1,
 	MX25_PAD_SD1_DATA2__SD1_DATA2,
 	MX25_PAD_SD1_DATA3__SD1_DATA3,
+	MX25_PAD_A14__GPIO_2_0, /* WriteProtect */
+	MX25_PAD_A15__GPIO_2_1, /* CardDetect */
 
 	/* I2C1 */
 	MX25_PAD_I2C1_CLK__I2C1_CLK,
@@ -208,6 +209,14 @@ static const struct imxi2c_platform_data mx25_3ds_i2c0_data __initconst = {
 	.bitrate = 100000,
 };
 
+#define SD1_GPIO_WP	IMX_GPIO_NR(2, 0)
+#define SD1_GPIO_CD	IMX_GPIO_NR(2, 1)
+
+static const struct esdhc_platform_data mx25pdk_esdhc_pdata __initconst = {
+	.wp_gpio = SD1_GPIO_WP,
+	.cd_gpio = SD1_GPIO_CD,
+};
+
 static void __init mx25pdk_init(void)
 {
 	mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
@@ -225,7 +234,7 @@ static void __init mx25pdk_init(void)
 	imx25_add_fec(&mx25_fec_pdata);
 	imx25_add_imx_keypad(&mx25pdk_keymap_data);
 
-	imx25_add_sdhci_esdhc_imx(0, NULL);
+	imx25_add_sdhci_esdhc_imx(0, &mx25pdk_esdhc_pdata);
 	imx25_add_imx_i2c0(&mx25_3ds_i2c0_data);
 }
 

arch/arm/mach-imx/mach-mx27ads.c

@@ -29,7 +29,6 @@
 #include <asm/mach/map.h>
 #include <mach/gpio.h>
 #include <mach/iomux-mx27.h>
-#include <mach/mxc_nand.h>
 
 #include "devices-imx27.h"
 

arch/arm/mach-mx3/mach-mx31_3ds.c → arch/arm/mach-imx/mach-mx31_3ds.c

@@ -39,13 +39,8 @@
 #include <mach/iomux-mx3.h>
 #include <mach/3ds_debugboard.h>
 #include <mach/ulpi.h>
-#include <mach/mmc.h>
-#include <mach/ipu.h>
-#include <mach/mx3fb.h>
-#include <mach/mx3_camera.h>
 
 #include "devices-imx31.h"
-#include "devices.h"
 
 /* CPLD IRQ line for external uart, external ethernet etc */
 #define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
@@ -178,22 +173,37 @@ static struct gpio mx31_3ds_camera_gpios[] = {
 	{ MX31_3DS_GPIO_CAMERA_RST, GPIOF_OUT_INIT_HIGH, "camera-reset" },
 };
 
-static int __init mx31_3ds_camera_alloc_dma(void)
+static const struct mx3_camera_pdata mx31_3ds_camera_pdata __initconst = {
+	.flags = MX3_CAMERA_DATAWIDTH_10,
+	.mclk_10khz = 2600,
+};
+
+static int __init mx31_3ds_init_camera(void)
 {
-	int dma;
+	int dma, ret = -ENOMEM;
+	struct platform_device *pdev =
+		imx31_alloc_mx3_camera(&mx31_3ds_camera_pdata);
+
+	if (IS_ERR(pdev))
+		return PTR_ERR(pdev);
 
 	if (!mx3_camera_base)
-		return -ENOMEM;
+		goto err;
 
-	dma = dma_declare_coherent_memory(&mx3_camera.dev,
+	dma = dma_declare_coherent_memory(&pdev->dev,
 					mx3_camera_base, mx3_camera_base,
 					MX31_3DS_CAMERA_BUF_SIZE,
 					DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
 
 	if (!(dma & DMA_MEMORY_MAP))
-		return -ENOMEM;
+		goto err;
 
-	return 0;
+	ret = platform_device_add(pdev);
+	if (ret)
+err:
+		platform_device_put(pdev);
+
+	return ret;
 }
 
 static int mx31_3ds_camera_power(struct device *dev, int on)
@@ -241,12 +251,6 @@ static struct platform_device mx31_3ds_ov2640 = {
 	},
 };
 
-struct mx3_camera_pdata mx31_3ds_camera_pdata = {
-	.dma_dev	= &mx3_ipu.dev,
-	.flags		= MX3_CAMERA_DATAWIDTH_10,
-	.mclk_10khz	= 2600,
-};
-
 /*
  * FB support
  */
@@ -273,8 +277,7 @@ static struct ipu_platform_data mx3_ipu_data = {
 	.irq_base = MXC_IPU_IRQ_START,
 };
 
-static struct mx3fb_platform_data mx3fb_pdata = {
-	.dma_dev	= &mx3_ipu.dev,
+static struct mx3fb_platform_data mx3fb_pdata __initdata = {
 	.name		= "Epson-VGA",
 	.mode		= fb_modedb,
 	.num_modes	= ARRAY_SIZE(fb_modedb),
@@ -723,8 +726,8 @@ static void __init mx31_3ds_init(void)
 	imx31_add_mxc_mmc(0, &sdhc1_pdata);
 
 	imx31_add_spi_imx0(&spi0_pdata);
-	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
-	mxc_register_device(&mx3_fb, &mx3fb_pdata);
+	imx31_add_ipu_core(&mx3_ipu_data);
+	imx31_add_mx3_sdc_fb(&mx3fb_pdata);
 
 	/* CSI */
 	/* Camera power: default - off */
@@ -735,10 +738,7 @@ static void __init mx31_3ds_init(void)
 		iclink_ov2640.power = NULL;
 	}
 
-	if (!mx31_3ds_camera_alloc_dma())
-		mxc_register_device(&mx3_camera, &mx31_3ds_camera_pdata);
-	else
-		pr_err("Failed to allocate dma memory for camera");
+	mx31_3ds_init_camera();
 }
 
 static void __init mx31_3ds_timer_init(void)

arch/arm/mach-mx3/mach-mx31ads.c → arch/arm/mach-imx/mach-mx31ads.c

@@ -38,7 +38,6 @@
 #endif
 
 #include "devices-imx31.h"
-#include "devices.h"
 
 /* PBC Board interrupt status register */
 #define PBC_INTSTATUS           0x000016

arch/arm/mach-mx3/mach-mx31lilly.c → arch/arm/mach-imx/mach-mx31lilly.c

@@ -46,7 +46,6 @@
 #include <mach/ulpi.h>
 
 #include "devices-imx31.h"
-#include "devices.h"
 
 /*
  * This file contains module-specific initialization routines for LILLY-1131.

arch/arm/mach-mx3/mach-mx31lite.c → arch/arm/mach-imx/mach-mx31lite.c

@@ -44,7 +44,6 @@
 #include <mach/ulpi.h>
 
 #include "devices-imx31.h"
-#include "devices.h"
 
 /*
  * This file contains the module-specific initialization routines.

arch/arm/mach-mx3/mach-mx31moboard.c → arch/arm/mach-imx/mach-mx31moboard.c

@@ -27,6 +27,7 @@
 #include <linux/mfd/mc13783.h>
 #include <linux/spi/spi.h>
 #include <linux/types.h>
+#include <linux/memblock.h>
 
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
@@ -39,13 +40,9 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/iomux-mx3.h>
-#include <mach/ipu.h>
-#include <mach/mx3_camera.h>
-#include <mach/spi.h>
 #include <mach/ulpi.h>
 
 #include "devices-imx31.h"
-#include "devices.h"
 
 static unsigned int moboard_pins[] = {
 	/* UART0 */
@@ -102,7 +99,7 @@ static unsigned int moboard_pins[] = {
 };
 
 static struct physmap_flash_data mx31moboard_flash_data = {
-	.width  	= 2,
+	.width	= 2,
 };
 
 static struct resource mx31moboard_flash_resource = {
@@ -194,8 +191,8 @@ static struct regulator_init_data sdhc_vreg_data = {
 
 static struct regulator_consumer_supply cam_consumers[] = {
 	{
-		.dev	= &mx3_camera.dev,
-		.supply	= "cam_vcc",
+		.dev_name = "mx3_camera.0",
+		.supply = "cam_vcc",
 	},
 };
 
@@ -430,9 +427,9 @@ static int __init moboard_usbh2_init(void)
 
 static struct gpio_led mx31moboard_leds[] = {
 	{
-		.name 	= "coreboard-led-0:red:running",
+		.name	= "coreboard-led-0:red:running",
 		.default_trigger = "heartbeat",
-		.gpio 	= IOMUX_TO_GPIO(MX31_PIN_SVEN0),
+		.gpio	= IOMUX_TO_GPIO(MX31_PIN_SVEN0),
 	}, {
 		.name	= "coreboard-led-1:red",
 		.gpio	= IOMUX_TO_GPIO(MX31_PIN_STX0),
@@ -446,7 +443,7 @@ static struct gpio_led mx31moboard_leds[] = {
 };
 
 static struct gpio_led_platform_data mx31moboard_led_pdata = {
-	.num_leds 	= ARRAY_SIZE(mx31moboard_leds),
+	.num_leds	= ARRAY_SIZE(mx31moboard_leds),
 	.leds		= mx31moboard_leds,
 };
 
@@ -458,7 +455,7 @@ static struct platform_device mx31moboard_leds_device = {
 	},
 };
 
-static struct ipu_platform_data mx3_ipu_data = {
+static const struct ipu_platform_data mx3_ipu_data __initconst = {
 	.irq_base = MXC_IPU_IRQ_START,
 };
 
@@ -467,37 +464,39 @@ static struct platform_device *devices[] __initdata = {
 	&mx31moboard_leds_device,
 };
 
-static struct mx3_camera_pdata camera_pdata = {
-	.dma_dev	= &mx3_ipu.dev,
+static struct mx3_camera_pdata camera_pdata __initdata = {
 	.flags		= MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
 	.mclk_10khz	= 4800,
 };
 
-#define CAMERA_BUF_SIZE	(4*1024*1024)
+static phys_addr_t mx3_camera_base __initdata;
+#define MX3_CAMERA_BUF_SIZE SZ_4M
 
-static int __init mx31moboard_cam_alloc_dma(const size_t buf_size)
+static int __init mx31moboard_init_cam(void)
 {
-	dma_addr_t dma_handle;
-	void *buf;
-	int dma;
-
-	if (buf_size < 2 * 1024 * 1024)
-		return -EINVAL;
+	int dma, ret = -ENOMEM;
+	struct platform_device *pdev;
 
-	buf = dma_alloc_coherent(NULL, buf_size, &dma_handle, GFP_KERNEL);
-	if (!buf) {
-		pr_err("%s: cannot allocate camera buffer-memory\n", __func__);
-		return -ENOMEM;
-	}
+	imx31_add_ipu_core(&mx3_ipu_data);
 
-	memset(buf, 0, buf_size);
+	pdev = imx31_alloc_mx3_camera(&camera_pdata);
+	if (IS_ERR(pdev))
+		return PTR_ERR(pdev);
 
-	dma = dma_declare_coherent_memory(&mx3_camera.dev,
-					dma_handle, dma_handle, buf_size,
+	dma = dma_declare_coherent_memory(&pdev->dev,
+					mx3_camera_base, mx3_camera_base,
+					MX3_CAMERA_BUF_SIZE,
 					DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
+	if (!(dma & DMA_MEMORY_MAP))
+		goto err;
+
+	ret = platform_device_add(pdev);
+	if (ret)
+err:
+		platform_device_put(pdev);
+
+	return ret;
 
-	/* The way we call dma_declare_coherent_memory only a malloc can fail */
-	return dma & DMA_MEMORY_MAP ? 0 : -ENOMEM;
 }
 
 static int mx31moboard_baseboard;
@@ -529,9 +528,7 @@ static void __init mx31moboard_init(void)
 
 	imx31_add_mxc_mmc(0, &sdhc1_pdata);
 
-	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
-	if (!mx31moboard_cam_alloc_dma(CAMERA_BUF_SIZE))
-		mxc_register_device(&mx3_camera, &camera_pdata);
+	mx31moboard_init_cam();
 
 	usb_xcvr_reset();
 
@@ -565,9 +562,19 @@ struct sys_timer mx31moboard_timer = {
 	.init	= mx31moboard_timer_init,
 };
 
+static void __init mx31moboard_reserve(void)
+{
+	/* reserve 4 MiB for mx3-camera */
+	mx3_camera_base = memblock_alloc(MX3_CAMERA_BUF_SIZE,
+			MX3_CAMERA_BUF_SIZE);
+	memblock_free(mx3_camera_base, MX3_CAMERA_BUF_SIZE);
+	memblock_remove(mx3_camera_base, MX3_CAMERA_BUF_SIZE);
+}
+
 MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
 	/* Maintainer: Valentin Longchamp, EPFL Mobots group */
 	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.reserve = mx31moboard_reserve,
 	.map_io = mx31_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,

arch/arm/mach-mx3/mach-mx35_3ds.c → arch/arm/mach-imx/mach-mx35_3ds.c

@@ -42,7 +42,6 @@
 #include <mach/3ds_debugboard.h>
 
 #include "devices-imx35.h"
-#include "devices.h"
 
 #define EXPIO_PARENT_INT	(MXC_INTERNAL_IRQS + GPIO_PORTA + 1)
 

arch/arm/mach-imx/mach-mxt_td60.c

@@ -29,7 +29,6 @@
 #include <asm/mach/map.h>
 #include <linux/gpio.h>
 #include <mach/iomux-mx27.h>
-#include <mach/mxc_nand.h>
 #include <linux/i2c/pca953x.h>
 
 #include "devices-imx27.h"

arch/arm/mach-imx/mach-pca100.c

@@ -37,7 +37,6 @@
 #include <mach/iomux-mx27.h>
 #include <asm/mach/time.h>
 #include <mach/audmux.h>
-#include <mach/mxc_nand.h>
 #include <mach/irqs.h>
 #include <mach/ulpi.h>
 

arch/arm/mach-mx3/mach-pcm037.c → arch/arm/mach-imx/mach-pcm037.c

@@ -31,6 +31,7 @@
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
 #include <linux/gfp.h>
+#include <linux/memblock.h>
 
 #include <media/soc_camera.h>
 
@@ -41,13 +42,9 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/iomux-mx3.h>
-#include <mach/ipu.h>
-#include <mach/mx3_camera.h>
-#include <mach/mx3fb.h>
 #include <mach/ulpi.h>
 
 #include "devices-imx31.h"
-#include "devices.h"
 #include "pcm037.h"
 
 static enum pcm037_board_variant pcm037_instance = PCM037_PCM970;
@@ -404,35 +401,35 @@ static const struct imxmmc_platform_data sdhc_pdata __initconst = {
 	.exit = pcm970_sdhc1_exit,
 };
 
-struct mx3_camera_pdata camera_pdata = {
-	.dma_dev	= &mx3_ipu.dev,
+struct mx3_camera_pdata camera_pdata __initdata = {
 	.flags		= MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
 	.mclk_10khz	= 2000,
 };
 
-static int __init pcm037_camera_alloc_dma(const size_t buf_size)
-{
-	dma_addr_t dma_handle;
-	void *buf;
-	int dma;
-
-	if (buf_size < 2 * 1024 * 1024)
-		return -EINVAL;
+static phys_addr_t mx3_camera_base __initdata;
+#define MX3_CAMERA_BUF_SIZE SZ_4M
 
-	buf = dma_alloc_coherent(NULL, buf_size, &dma_handle, GFP_KERNEL);
-	if (!buf) {
-		pr_err("%s: cannot allocate camera buffer-memory\n", __func__);
-		return -ENOMEM;
-	}
+static int __init pcm037_init_camera(void)
+{
+	int dma, ret = -ENOMEM;
+	struct platform_device *pdev = imx31_alloc_mx3_camera(&camera_pdata);
 
-	memset(buf, 0, buf_size);
+	if (IS_ERR(pdev))
+		return PTR_ERR(pdev);
 
-	dma = dma_declare_coherent_memory(&mx3_camera.dev,
-					dma_handle, dma_handle, buf_size,
+	dma = dma_declare_coherent_memory(&pdev->dev,
+					mx3_camera_base, mx3_camera_base,
+					MX3_CAMERA_BUF_SIZE,
 					DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
+	if (!(dma & DMA_MEMORY_MAP))
+		goto err;
+
+	ret = platform_device_add(pdev);
+	if (ret)
+err:
+		platform_device_put(pdev);
 
-	/* The way we call dma_declare_coherent_memory only a malloc can fail */
-	return dma & DMA_MEMORY_MAP ? 0 : -ENOMEM;
+	return ret;
 }
 
 static struct platform_device *devices[] __initdata = {
@@ -442,7 +439,7 @@ static struct platform_device *devices[] __initdata = {
 	&pcm037_mt9v022,
 };
 
-static struct ipu_platform_data mx3_ipu_data = {
+static const struct ipu_platform_data mx3_ipu_data __initconst = {
 	.irq_base = MXC_IPU_IRQ_START,
 };
 
@@ -500,7 +497,6 @@ static const struct fb_videomode fb_modedb[] = {
 };
 
 static struct mx3fb_platform_data mx3fb_pdata = {
-	.dma_dev	= &mx3_ipu.dev,
 	.name		= "Sharp-LQ035Q7DH06-QVGA",
 	.mode		= fb_modedb,
 	.num_modes	= ARRAY_SIZE(fb_modedb),
@@ -638,8 +634,8 @@ static void __init pcm037_init(void)
 
 	imx31_add_mxc_nand(&pcm037_nand_board_info);
 	imx31_add_mxc_mmc(0, &sdhc_pdata);
-	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
-	mxc_register_device(&mx3_fb, &mx3fb_pdata);
+	imx31_add_ipu_core(&mx3_ipu_data);
+	imx31_add_mx3_sdc_fb(&mx3fb_pdata);
 
 	/* CSI */
 	/* Camera power: default - off */
@@ -649,8 +645,7 @@ static void __init pcm037_init(void)
 	else
 		iclink_mt9t031.power = NULL;
 
-	if (!pcm037_camera_alloc_dma(4 * 1024 * 1024))
-		mxc_register_device(&mx3_camera, &camera_pdata);
+	pcm037_init_camera();
 
 	platform_device_register(&pcm970_sja1000);
 
@@ -680,9 +675,19 @@ struct sys_timer pcm037_timer = {
 	.init	= pcm037_timer_init,
 };
 
+static void __init pcm037_reserve(void)
+{
+	/* reserve 4 MiB for mx3-camera */
+	mx3_camera_base = memblock_alloc(MX3_CAMERA_BUF_SIZE,
+			MX3_CAMERA_BUF_SIZE);
+	memblock_free(mx3_camera_base, MX3_CAMERA_BUF_SIZE);
+	memblock_remove(mx3_camera_base, MX3_CAMERA_BUF_SIZE);
+}
+
 MACHINE_START(PCM037, "Phytec Phycore pcm037")
 	/* Maintainer: Pengutronix */
 	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.reserve = pcm037_reserve,
 	.map_io = mx31_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,

arch/arm/mach-mx3/mach-pcm037_eet.c → arch/arm/mach-imx/mach-pcm037_eet.c

@@ -7,19 +7,16 @@
  * published by the Free Software Foundation.
  */
 #include <linux/gpio.h>
-#include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
 
 #include <mach/common.h>
 #include <mach/iomux-mx3.h>
-#include <mach/spi.h>
 
 #include <asm/mach-types.h>
 
 #include "pcm037.h"
-#include "devices.h"
 #include "devices-imx31.h"
 
 static unsigned int pcm037_eet_pins[] = {
@@ -156,20 +153,13 @@ static struct gpio_keys_button pcm037_gpio_keys[] = {
 	},
 };
 
-static struct gpio_keys_platform_data pcm037_gpio_keys_platform_data = {
+static const struct gpio_keys_platform_data
+		pcm037_gpio_keys_platform_data __initconst = {
 	.buttons	= pcm037_gpio_keys,
 	.nbuttons	= ARRAY_SIZE(pcm037_gpio_keys),
 	.rep		= 0, /* No auto-repeat */
 };
 
-static struct platform_device pcm037_gpio_keys_device = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &pcm037_gpio_keys_platform_data,
-	},
-};
-
 static int __init eet_init_devices(void)
 {
 	if (!machine_is_pcm037() || pcm037_variant() != PCM037_EET)
@@ -182,9 +172,8 @@ static int __init eet_init_devices(void)
 	spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev));
 	imx31_add_spi_imx0(&pcm037_spi1_pdata);
 
-	platform_device_register(&pcm037_gpio_keys_device);
+	imx_add_gpio_keys(&pcm037_gpio_keys_platform_data);
 
 	return 0;
 }
-
 late_initcall(eet_init_devices);

arch/arm/mach-imx/mach-pcm038.c

@@ -36,7 +36,6 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/iomux-mx27.h>
-#include <mach/mxc_nand.h>
 #include <mach/ulpi.h>
 
 #include "devices-imx27.h"

arch/arm/mach-mx3/mach-pcm043.c → arch/arm/mach-imx/mach-pcm043.c

@@ -36,14 +36,10 @@
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/iomux-mx35.h>
-#include <mach/ipu.h>
-#include <mach/mx3fb.h>
 #include <mach/ulpi.h>
 #include <mach/audmux.h>
-#include <mach/esdhc.h>
 
 #include "devices-imx35.h"
-#include "devices.h"
 
 static const struct fb_videomode fb_modedb[] = {
 	{
@@ -81,12 +77,11 @@ static const struct fb_videomode fb_modedb[] = {
 	},
 };
 
-static struct ipu_platform_data mx3_ipu_data = {
+static const struct ipu_platform_data mx3_ipu_data __initconst = {
 	.irq_base = MXC_IPU_IRQ_START,
 };
 
-static struct mx3fb_platform_data mx3fb_pdata = {
-	.dma_dev	= &mx3_ipu.dev,
+static struct mx3fb_platform_data mx3fb_pdata __initdata = {
 	.name		= "Sharp-LQ035Q7",
 	.mode		= fb_modedb,
 	.num_modes	= ARRAY_SIZE(fb_modedb),
@@ -127,12 +122,12 @@ static struct at24_platform_data board_eeprom = {
 };
 
 static struct i2c_board_info pcm043_i2c_devices[] = {
-       {
+	{
 		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
 		.platform_data = &board_eeprom,
 	}, {
 		I2C_BOARD_INFO("pcf8563", 0x51),
-	}
+	},
 };
 
 static struct platform_device *devices[] __initdata = {
@@ -390,8 +385,8 @@ static void __init pcm043_init(void)
 
 	imx35_add_imx_i2c0(&pcm043_i2c0_data);
 
-	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
-	mxc_register_device(&mx3_fb, &mx3fb_pdata);
+	imx35_add_ipu_core(&mx3_ipu_data);
+	imx35_add_mx3_sdc_fb(&mx3fb_pdata);
 
 	if (otg_mode_host) {
 		otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |

arch/arm/mach-mx3/mach-qong.c → arch/arm/mach-imx/mach-qong.c

@@ -33,24 +33,23 @@
 #include <mach/iomux-mx3.h>
 
 #include "devices-imx31.h"
-#include "devices.h"
 
 /* FPGA defines */
 #define QONG_FPGA_VERSION(major, minor, rev)	\
 	(((major & 0xF) << 12) | ((minor & 0xF) << 8) | (rev & 0xFF))
 
-#define QONG_FPGA_BASEADDR 		MX31_CS1_BASE_ADDR
-#define QONG_FPGA_PERIPH_SIZE 		(1 << 24)
+#define QONG_FPGA_BASEADDR		MX31_CS1_BASE_ADDR
+#define QONG_FPGA_PERIPH_SIZE		(1 << 24)
 
 #define QONG_FPGA_CTRL_BASEADDR		QONG_FPGA_BASEADDR
-#define QONG_FPGA_CTRL_SIZE 		0x10
+#define QONG_FPGA_CTRL_SIZE		0x10
 /* FPGA control registers */
 #define QONG_FPGA_CTRL_VERSION		0x00
 
 #define QONG_DNET_ID		1
 #define QONG_DNET_BASEADDR	\
 	(QONG_FPGA_BASEADDR + QONG_DNET_ID * QONG_FPGA_PERIPH_SIZE)
-#define QONG_DNET_SIZE 		0x00001000
+#define QONG_DNET_SIZE		0x00001000
 
 #define QONG_FPGA_IRQ		IOMUX_TO_IRQ(MX31_PIN_DTR_DCE1)
 
@@ -166,15 +165,15 @@ static struct platform_nand_data qong_nand_data = {
 		.options		= 0,
 	},
 	.ctrl = {
-		.cmd_ctrl 		= qong_nand_cmd_ctrl,
+		.cmd_ctrl		= qong_nand_cmd_ctrl,
 		.dev_ready		= qong_nand_device_ready,
 		.select_chip		= qong_nand_select_chip,
 	}
 };
 
 static struct resource qong_nand_resource = {
-	.start  	= MX31_CS3_BASE_ADDR,
-	.end    	= MX31_CS3_BASE_ADDR + SZ_32M - 1,
+	.start		= MX31_CS3_BASE_ADDR,
+	.end		= MX31_CS3_BASE_ADDR + SZ_32M - 1,
 	.flags		= IORESOURCE_MEM,
 };
 

arch/arm/mach-mx3/mach-vpr200.c → arch/arm/mach-imx/mach-vpr200.c

@@ -32,16 +32,12 @@
 #include <mach/common.h>
 #include <mach/iomux-mx35.h>
 #include <mach/irqs.h>
-#include <mach/ipu.h>
-#include <mach/mx3fb.h>
 
 #include <linux/i2c.h>
 #include <linux/i2c/at24.h>
 #include <linux/mfd/mc13xxx.h>
-#include <linux/gpio_keys.h>
 
 #include "devices-imx35.h"
-#include "devices.h"
 
 #define GPIO_LCDPWR	IMX_GPIO_NR(1, 2)
 #define GPIO_PMIC_INT	IMX_GPIO_NR(2, 0)
@@ -91,12 +87,11 @@ static const struct fb_videomode fb_modedb[] = {
 	}
 };
 
-static struct ipu_platform_data mx3_ipu_data = {
+static const struct ipu_platform_data mx3_ipu_data __initconst = {
 	.irq_base = MXC_IPU_IRQ_START,
 };
 
-static struct mx3fb_platform_data mx3fb_pdata = {
-	.dma_dev	= &mx3_ipu.dev,
+static struct mx3fb_platform_data mx3fb_pdata __initdata = {
 	.name		= "PT0708048",
 	.mode		= fb_modedb,
 	.num_modes	= ARRAY_SIZE(fb_modedb),
@@ -141,18 +136,12 @@ static struct gpio_keys_button vpr200_gpio_keys_table[] = {
 	{KEY_F9, GPIO_BUTTON8, 1, "vpr-keys: F9", 1, VPR_KEY_DEBOUNCE},
 };
 
-static struct gpio_keys_platform_data vpr200_gpio_keys_data = {
+static const struct gpio_keys_platform_data
+		vpr200_gpio_keys_data __initconst = {
 	.buttons = vpr200_gpio_keys_table,
 	.nbuttons = ARRAY_SIZE(vpr200_gpio_keys_table),
 };
 
-static struct platform_device vpr200_device_gpiokeys = {
-	.name = "gpio-keys",
-	.dev = {
-		.platform_data = &vpr200_gpio_keys_data,
-	}
-};
-
 static struct mc13xxx_platform_data vpr200_pmic = {
 	.flags = MC13XXX_USE_ADC | MC13XXX_USE_TOUCHSCREEN,
 };
@@ -271,7 +260,6 @@ static const struct mxc_usbh_platform_data usb_host_pdata __initconst = {
 
 static struct platform_device *devices[] __initdata = {
 	&vpr200_flash,
-	&vpr200_device_gpiokeys,
 };
 
 /*
@@ -283,6 +271,7 @@ static void __init vpr200_board_init(void)
 
 	imx35_add_fec(NULL);
 	imx35_add_imx2_wdt(NULL);
+	imx_add_gpio_keys(&vpr200_gpio_keys_data);
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
@@ -299,8 +288,8 @@ static void __init vpr200_board_init(void)
 	imx35_add_imx_uart0(NULL);
 	imx35_add_imx_uart2(NULL);
 
-	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
-	mxc_register_device(&mx3_fb, &mx3fb_pdata);
+	imx35_add_ipu_core(&mx3_ipu_data);
+	imx35_add_mx3_sdc_fb(&mx3fb_pdata);
 
 	imx35_add_fsl_usb2_udc(&otg_device_pdata);
 	imx35_add_mxc_ehci_hs(&usb_host_pdata);

arch/arm/mach-imx/mm-imx31.c

@@ -0,0 +1,66 @@
+/*
+ *  Copyright (C) 1999,2000 Arm Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *    - add MX31 specific definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/err.h>
+
+#include <asm/pgtable.h>
+#include <asm/mach/map.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-v3.h>
+#include <mach/gpio.h>
+#include <mach/irqs.h>
+
+static struct map_desc mx31_io_desc[] __initdata = {
+	imx_map_entry(MX31, X_MEMC, MT_DEVICE),
+	imx_map_entry(MX31, AVIC, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX31, AIPS1, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX31, AIPS2, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX31, SPBA0, MT_DEVICE_NONSHARED),
+};
+
+/*
+ * This function initializes the memory map. It is called during the
+ * system startup to create static physical to virtual memory mappings
+ * for the IO modules.
+ */
+void __init mx31_map_io(void)
+{
+	iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc));
+}
+
+void __init imx31_init_early(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX31);
+	mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
+}
+
+static struct mxc_gpio_port imx31_gpio_ports[] = {
+	DEFINE_IMX_GPIO_PORT_IRQ(MX31, 0, 1, MX31_INT_GPIO1),
+	DEFINE_IMX_GPIO_PORT_IRQ(MX31, 1, 2, MX31_INT_GPIO2),
+	DEFINE_IMX_GPIO_PORT_IRQ(MX31, 2, 3, MX31_INT_GPIO3),
+};
+
+void __init mx31_init_irq(void)
+{
+	mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR));
+	mxc_gpio_init(imx31_gpio_ports,	ARRAY_SIZE(imx31_gpio_ports));
+}

arch/arm/mach-imx/mm-imx35.c

@@ -0,0 +1,63 @@
+/*
+ *  Copyright (C) 1999,2000 Arm Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *    - add MX31 specific definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/err.h>
+
+#include <asm/pgtable.h>
+#include <asm/mach/map.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-v3.h>
+#include <mach/gpio.h>
+#include <mach/irqs.h>
+
+static struct map_desc mx35_io_desc[] __initdata = {
+	imx_map_entry(MX35, X_MEMC, MT_DEVICE),
+	imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED),
+};
+
+void __init mx35_map_io(void)
+{
+	iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
+}
+
+void __init imx35_init_early(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX35);
+	mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
+	mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
+}
+
+static struct mxc_gpio_port imx35_gpio_ports[] = {
+	DEFINE_IMX_GPIO_PORT_IRQ(MX35, 0, 1, MX35_INT_GPIO1),
+	DEFINE_IMX_GPIO_PORT_IRQ(MX35, 1, 2, MX35_INT_GPIO2),
+	DEFINE_IMX_GPIO_PORT_IRQ(MX35, 2, 3, MX35_INT_GPIO3),
+};
+
+void __init mx35_init_irq(void)
+{
+	mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
+	mxc_gpio_init(imx35_gpio_ports,	ARRAY_SIZE(imx35_gpio_ports));
+}

arch/arm/mach-mx3/mx31lilly-db.c → arch/arm/mach-imx/mx31lilly-db.c

@@ -34,11 +34,8 @@
 #include <mach/common.h>
 #include <mach/iomux-mx3.h>
 #include <mach/board-mx31lilly.h>
-#include <mach/mx3fb.h>
-#include <mach/ipu.h>
 
 #include "devices-imx31.h"
-#include "devices.h"
 
 /*
  * This file contains board-specific initialization routines for the
@@ -164,13 +161,13 @@ static const struct imxmmc_platform_data mmc_pdata __initconst = {
 };
 
 /* Framebuffer support */
-static struct ipu_platform_data ipu_data __initdata = {
+static const struct ipu_platform_data ipu_data __initconst = {
 	.irq_base = MXC_IPU_IRQ_START,
 };
 
 static const struct fb_videomode fb_modedb = {
 	/* 640x480 TFT panel (IPS-056T) */
-	.name	   	= "CRT-VGA",
+	.name		= "CRT-VGA",
 	.refresh	= 64,
 	.xres		= 640,
 	.yres		= 480,
@@ -187,7 +184,6 @@ static const struct fb_videomode fb_modedb = {
 };
 
 static struct mx3fb_platform_data fb_pdata __initdata = {
-	.dma_dev	= &mx3_ipu.dev,
 	.name		= "CRT-VGA",
 	.mode		= &fb_modedb,
 	.num_modes	= 1,
@@ -202,8 +198,8 @@ static void __init mx31lilly_init_fb(void)
 		return;
 	}
 
-	mxc_register_device(&mx3_ipu, &ipu_data);
-	mxc_register_device(&mx3_fb, &fb_pdata);
+	imx31_add_ipu_core(&ipu_data);
+	imx31_add_mx3_sdc_fb(&fb_pdata);
 	gpio_direction_output(LCD_VCC_EN_GPIO, 1);
 }
 
@@ -218,4 +214,3 @@ void __init mx31lilly_db_init(void)
 	imx31_add_mxc_mmc(0, &mmc_pdata);
 	mx31lilly_init_fb();
 }
-

arch/arm/mach-mx3/mx31lite-db.c → arch/arm/mach-imx/mx31lite-db.c

@@ -37,7 +37,6 @@
 #include <mach/board-mx31lite.h>
 
 #include "devices-imx31.h"
-#include "devices.h"
 
 /*
  * This file contains board-specific initialization routines for the
@@ -200,5 +199,5 @@ void __init mx31lite_db_init(void)
 	imx31_add_spi_imx0(&spi0_pdata);
 	platform_device_register(&litekit_led_device);
 	imx31_add_imx2_wdt(NULL);
-	mxc_register_device(&imx_rtc_device0, NULL);
+	imx31_add_mxc_rtc(NULL);
 }

arch/arm/mach-mx3/mx31moboard-devboard.c → arch/arm/mach-imx/mx31moboard-devboard.c

@@ -28,7 +28,6 @@
 #include <mach/ulpi.h>
 
 #include "devices-imx31.h"
-#include "devices.h"
 
 static unsigned int devboard_pins[] = {
 	/* UART1 */

arch/arm/mach-mx3/mx31moboard-marxbot.c → arch/arm/mach-imx/mx31moboard-marxbot.c

@@ -26,14 +26,12 @@
 
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/ulpi.h>
 
 #include <media/soc_camera.h>
 
 #include "devices-imx31.h"
-#include "devices.h"
 
 static unsigned int marxbot_pins[] = {
 	/* SDHC2 */

arch/arm/mach-mx3/mx31moboard-smartbot.c → arch/arm/mach-imx/mx31moboard-smartbot.c

@@ -32,7 +32,6 @@
 #include <media/soc_camera.h>
 
 #include "devices-imx31.h"
-#include "devices.h"
 
 static unsigned int smartbot_pins[] = {
 	/* UART1 */

arch/arm/mach-mx3/Kconfig

@@ -1,257 +0,0 @@
-if ARCH_MX3
-
-# ARCH_MX31 and ARCH_MX35 are left for compatibility
-# Some usages assume that having one of them implies not having (e.g.) ARCH_MX2.
-# To easily distinguish good and reviewed from unreviewed usages new (and IMHO
-# more sensible) names are used: SOC_IMX31 and SOC_IMX35
-config ARCH_MX31
-	bool
-
-config ARCH_MX35
-	bool
-
-config SOC_IMX31
-	bool
-	select IMX_HAVE_PLATFORM_MXC_RNGA
-	select ARCH_MXC_AUDMUX_V2
-	select ARCH_MX31
-	select MXC_AVIC
-
-config SOC_IMX35
-	bool
-	select ARCH_MXC_IOMUX_V3
-	select ARCH_MXC_AUDMUX_V2
-	select HAVE_EPIT
-	select ARCH_MX35
-	select MXC_AVIC
-
-comment "MX3 platforms:"
-
-config MACH_MX31ADS
-	bool "Support MX31ADS platforms"
-	select SOC_IMX31
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_SSI
-	select IMX_HAVE_PLATFORM_IMX_UART
-	default y
-	help
-	  Include support for MX31ADS platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_MX31ADS_WM1133_EV1
-	bool "Support Wolfson Microelectronics 1133-EV1 module"
-	depends on MACH_MX31ADS
-	depends on MFD_WM8350_I2C
-	depends on REGULATOR_WM8350
-	select MFD_WM8350_CONFIG_MODE_0
-	select MFD_WM8352_CONFIG_MODE_0
-	help
-	  Include support for the Wolfson Microelectronics 1133-EV1 PMU
-	  and audio module for the MX31ADS platform.
-
-config MACH_PCM037
-	bool "Support Phytec pcm037 (i.MX31) platforms"
-	select SOC_IMX31
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_MMC
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_MXC_W1
-	select MXC_ULPI if USB_ULPI
-	help
-	  Include support for Phytec pcm037 platform. This includes
-	  specific configurations for the board and its peripherals.
-
-config MACH_PCM037_EET
-	bool "Support pcm037 EET board extensions"
-	depends on MACH_PCM037
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	help
-	  Add support for PCM037 EET baseboard extensions. If you are using the
-	  OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
-	  command-line parameter.
-
-config MACH_MX31LITE
-	bool "Support MX31 LITEKIT (LogicPD)"
-	select SOC_IMX31
-	select MXC_ULPI if USB_ULPI
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_MMC
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	help
-	  Include support for MX31 LITEKIT platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_MX31_3DS
-	bool "Support MX31PDK (3DS)"
-	select SOC_IMX31
-	select MXC_DEBUG_BOARD
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_KEYPAD
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	select MXC_ULPI if USB_ULPI
-	help
-	  Include support for MX31PDK (3DS) platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_MX31_3DS_MXC_NAND_USE_BBT
-	bool "Make the MXC NAND driver use the in flash Bad Block Table"
-	depends on MACH_MX31_3DS
-	depends on MTD_NAND_MXC
-	help
-	  Enable this if you want that the MXC NAND driver uses the in flash
-	  Bad Block Table to know what blocks are bad instead of scanning the
-	  entire flash looking for bad block markers.
-
-config MACH_MX31MOBOARD
-	bool "Support mx31moboard platforms (EPFL Mobots group)"
-	select SOC_IMX31
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_MMC
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	select MXC_ULPI if USB_ULPI
-	help
-	  Include support for mx31moboard platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_MX31LILLY
-	bool "Support MX31 LILLY-1131 platforms (INCO startec)"
-	select SOC_IMX31
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_MMC
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	select MXC_ULPI if USB_ULPI
-	help
-	  Include support for mx31 based LILLY1131 modules. This includes
-	  specific configurations for the board and its peripherals.
-
-config MACH_QONG
-	bool "Support Dave/DENX QongEVB-LITE platform"
-	select SOC_IMX31
-	select IMX_HAVE_PLATFORM_IMX_UART
-	help
-	  Include support for Dave/DENX QongEVB-LITE platform. This includes
-	  specific configurations for the board and its peripherals.
-
-config MACH_PCM043
-	bool "Support Phytec pcm043 (i.MX35) platforms"
-	select SOC_IMX35
-	select IMX_HAVE_PLATFORM_FLEXCAN
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_SSI
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select MXC_ULPI if USB_ULPI
-	help
-	  Include support for Phytec pcm043 platform. This includes
-	  specific configurations for the board and its peripherals.
-
-config MACH_ARMADILLO5X0
-	bool "Support Atmark Armadillo-500 Development Base Board"
-	select SOC_IMX31
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_MMC
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select MXC_ULPI if USB_ULPI
-	help
-	  Include support for Atmark Armadillo-500 platform. This includes
-	  specific configurations for the board and its peripherals.
-
-config MACH_MX35_3DS
-	bool "Support MX35PDK platform"
-	select SOC_IMX35
-	select MXC_DEBUG_BOARD
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	help
-	  Include support for MX35PDK platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_KZM_ARM11_01
-	bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
-	select SOC_IMX31
-	select IMX_HAVE_PLATFORM_IMX_UART
-	help
-	  Include support for KZM-ARM11-01. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_BUG
-	bool "Support Buglabs BUGBase platform"
-	select SOC_IMX31
-	select IMX_HAVE_PLATFORM_IMX_UART
-	default y
-	help
-	  Include support for BUGBase 1.3 platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_EUKREA_CPUIMX35
-	bool "Support Eukrea CPUIMX35 Platform"
-	select SOC_IMX35
-	select IMX_HAVE_PLATFORM_FLEXCAN
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select MXC_ULPI if USB_ULPI
-	help
-	  Include support for Eukrea CPUIMX35 platform. This includes
-	  specific configurations for the board and its peripherals.
-
-choice
-	prompt "Baseboard"
-	depends on MACH_EUKREA_CPUIMX35
-	default MACH_EUKREA_MBIMXSD35_BASEBOARD
-
-config MACH_EUKREA_MBIMXSD35_BASEBOARD
-	bool "Eukrea MBIMXSD development board"
-	select IMX_HAVE_PLATFORM_IMX_SSI
-	help
-	  This adds board specific devices that can be found on Eukrea's
-	  MBIMXSD evaluation board.
-
-endchoice
-
-config MACH_VPR200
-	bool "Support VPR200 platform"
-	select SOC_IMX35
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	help
-	  Include support for VPR200 platform. This includes specific
-	  configurations for the board and its peripherals.
-
-endif

arch/arm/mach-mx3/Makefile

@@ -1,26 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y				:= mm.o devices.o cpu.o
-obj-$(CONFIG_SOC_IMX31)		+= clock-imx31.o iomux-imx31.o ehci-imx31.o
-obj-$(CONFIG_SOC_IMX35)		+= clock-imx35.o ehci-imx35.o
-obj-$(CONFIG_MACH_MX31ADS)	+= mach-mx31ads.o
-obj-$(CONFIG_MACH_MX31LILLY)	+= mach-mx31lilly.o mx31lilly-db.o
-obj-$(CONFIG_MACH_MX31LITE)	+= mach-mx31lite.o mx31lite-db.o
-obj-$(CONFIG_MACH_PCM037)	+= mach-pcm037.o
-obj-$(CONFIG_MACH_PCM037_EET)	+= mach-pcm037_eet.o
-obj-$(CONFIG_MACH_MX31_3DS)	+= mach-mx31_3ds.o
-obj-$(CONFIG_MACH_MX31MOBOARD)	+= mach-mx31moboard.o mx31moboard-devboard.o \
-				   mx31moboard-marxbot.o mx31moboard-smartbot.o
-obj-$(CONFIG_MACH_QONG)		+= mach-qong.o
-obj-$(CONFIG_MACH_PCM043)	+= mach-pcm043.o
-obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o
-obj-$(CONFIG_MACH_MX35_3DS)	+= mach-mx35_3ds.o
-obj-$(CONFIG_MACH_KZM_ARM11_01)	+= mach-kzm_arm11_01.o
-obj-$(CONFIG_MACH_BUG)		+= mach-bug.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX35)	+= mach-cpuimx35.o
-obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD)	+= eukrea_mbimxsd-baseboard.o
-obj-$(CONFIG_MACH_VPR200)	+= mach-vpr200.o

arch/arm/mach-mx3/Makefile.boot

@@ -1,3 +0,0 @@
-   zreladdr-y	:= 0x80008000
-params_phys-y	:= 0x80000100
-initrd_phys-y	:= 0x80800000

arch/arm/mach-mx3/devices.c

@@ -1,115 +0,0 @@
-/*
- * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA  02110-1301, USA.
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/serial.h>
-#include <linux/gpio.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <mach/common.h>
-#include <mach/mx3_camera.h>
-
-#include "devices.h"
-
-/* i.MX31 Image Processing Unit */
-
-/* The resource order is important! */
-static struct resource mx3_ipu_rsrc[] = {
-	{
-		.start = MX3x_IPU_CTRL_BASE_ADDR,
-		.end = MX3x_IPU_CTRL_BASE_ADDR + 0x5F,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX3x_IPU_CTRL_BASE_ADDR + 0x88,
-		.end = MX3x_IPU_CTRL_BASE_ADDR + 0xB3,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX3x_INT_IPU_SYN,
-		.end = MX3x_INT_IPU_SYN,
-		.flags = IORESOURCE_IRQ,
-	}, {
-		.start = MX3x_INT_IPU_ERR,
-		.end = MX3x_INT_IPU_ERR,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mx3_ipu = {
-	.name = "ipu-core",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(mx3_ipu_rsrc),
-	.resource = mx3_ipu_rsrc,
-};
-
-static struct resource fb_resources[] = {
-	{
-		.start	= MX3x_IPU_CTRL_BASE_ADDR + 0xB4,
-		.end	= MX3x_IPU_CTRL_BASE_ADDR + 0x1BF,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-struct platform_device mx3_fb = {
-	.name		= "mx3_sdc_fb",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(fb_resources),
-	.resource	= fb_resources,
-	.dev		= {
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-       },
-};
-
-static struct resource camera_resources[] = {
-	{
-		.start	= MX3x_IPU_CTRL_BASE_ADDR + 0x60,
-		.end	= MX3x_IPU_CTRL_BASE_ADDR + 0x87,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-struct platform_device mx3_camera = {
-	.name		= "mx3-camera",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(camera_resources),
-	.resource	= camera_resources,
-	.dev		= {
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};
-
-static struct resource imx_rtc_resources[] = {
-	{
-		.start  = MX31_RTC_BASE_ADDR,
-		.end    = MX31_RTC_BASE_ADDR + 0x3fff,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.start  = MX31_INT_RTC,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device imx_rtc_device0 = {
-	.name           = "mxc_rtc",
-	.id             = -1,
-	.num_resources  = ARRAY_SIZE(imx_rtc_resources),
-	.resource       = imx_rtc_resources,
-};

arch/arm/mach-mx3/devices.h

@@ -1,4 +0,0 @@
-extern struct platform_device mx3_ipu;
-extern struct platform_device mx3_fb;
-extern struct platform_device mx3_camera;
-extern struct platform_device imx_rtc_device0;

arch/arm/mach-mx3/mm.c

@@ -1,141 +0,0 @@
-/*
- *  Copyright (C) 1999,2000 Arm Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *    - add MX31 specific definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/err.h>
-
-#include <asm/pgtable.h>
-#include <asm/mach/map.h>
-#include <asm/hardware/cache-l2x0.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-v3.h>
-#include <mach/gpio.h>
-#include <mach/irqs.h>
-
-#ifdef CONFIG_SOC_IMX31
-static struct map_desc mx31_io_desc[] __initdata = {
-	imx_map_entry(MX31, X_MEMC, MT_DEVICE),
-	imx_map_entry(MX31, AVIC, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX31, AIPS1, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX31, AIPS2, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX31, SPBA0, MT_DEVICE_NONSHARED),
-};
-
-/*
- * This function initializes the memory map. It is called during the
- * system startup to create static physical to virtual memory mappings
- * for the IO modules.
- */
-void __init mx31_map_io(void)
-{
-	iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc));
-}
-
-void __init imx31_init_early(void)
-{
-	mxc_set_cpu_type(MXC_CPU_MX31);
-	mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
-}
-
-static struct mxc_gpio_port imx31_gpio_ports[] = {
-	DEFINE_IMX_GPIO_PORT_IRQ(MX31, 0, 1, MX31_INT_GPIO1),
-	DEFINE_IMX_GPIO_PORT_IRQ(MX31, 1, 2, MX31_INT_GPIO2),
-	DEFINE_IMX_GPIO_PORT_IRQ(MX31, 2, 3, MX31_INT_GPIO3),
-};
-
-void __init mx31_init_irq(void)
-{
-	mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR));
-	mxc_gpio_init(imx31_gpio_ports,	ARRAY_SIZE(imx31_gpio_ports));
-}
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-#ifdef CONFIG_SOC_IMX35
-static struct map_desc mx35_io_desc[] __initdata = {
-	imx_map_entry(MX35, X_MEMC, MT_DEVICE),
-	imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED),
-};
-
-void __init mx35_map_io(void)
-{
-	iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
-}
-
-void __init imx35_init_early(void)
-{
-	mxc_set_cpu_type(MXC_CPU_MX35);
-	mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
-	mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
-}
-
-static struct mxc_gpio_port imx35_gpio_ports[] = {
-	DEFINE_IMX_GPIO_PORT_IRQ(MX35, 0, 1, MX35_INT_GPIO1),
-	DEFINE_IMX_GPIO_PORT_IRQ(MX35, 1, 2, MX35_INT_GPIO2),
-	DEFINE_IMX_GPIO_PORT_IRQ(MX35, 2, 3, MX35_INT_GPIO3),
-};
-
-void __init mx35_init_irq(void)
-{
-	mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
-	mxc_gpio_init(imx35_gpio_ports,	ARRAY_SIZE(imx35_gpio_ports));
-}
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-#ifdef CONFIG_CACHE_L2X0
-static int mxc_init_l2x0(void)
-{
-	void __iomem *l2x0_base;
-	void __iomem *clkctl_base;
-/*
- * First of all, we must repair broken chip settings. There are some
- * i.MX35 CPUs in the wild, comming with bogus L2 cache settings. These
- * misconfigured CPUs will run amok immediately when the L2 cache gets enabled.
- * Workaraound is to setup the correct register setting prior enabling the
- * L2 cache. This should not hurt already working CPUs, as they are using the
- * same value
- */
-#define L2_MEM_VAL 0x10
-
-	clkctl_base = ioremap(MX35_CLKCTL_BASE_ADDR, 4096);
-	if (clkctl_base != NULL) {
-		writel(0x00000515, clkctl_base + L2_MEM_VAL);
-		iounmap(clkctl_base);
-	} else {
-		pr_err("L2 cache: Cannot fix timing. Trying to continue without\n");
-	}
-
-	l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096);
-	if (IS_ERR(l2x0_base)) {
-		printk(KERN_ERR "remapping L2 cache area failed with %ld\n",
-				PTR_ERR(l2x0_base));
-		return 0;
-	}
-
-	l2x0_init(l2x0_base, 0x00030024, 0x00000000);
-
-	return 0;
-}
-
-arch_initcall(mxc_init_l2x0);
-#endif

arch/arm/mach-mx5/Kconfig

@@ -1,11 +1,11 @@
-if ARCH_MX5
-# ARCH_MX50/51/53 are left to mark places where prevent multi-soc in single
+if ARCH_MX503 || ARCH_MX51
+# ARCH_MX5/50/53 are left to mark places where prevent multi-soc in single
 # image. So for most time, SOC_IMX50/51/53 should be used.
 
-config ARCH_MX50
+config ARCH_MX5
 	bool
 
-config ARCH_MX51
+config ARCH_MX50
 	bool
 
 config ARCH_MX53
@@ -13,27 +13,54 @@ config ARCH_MX53
 
 config SOC_IMX50
 	bool
+	select CPU_V7
+	select ARM_L1_CACHE_SHIFT_6
 	select MXC_TZIC
 	select ARCH_MXC_IOMUX_V3
 	select ARCH_MXC_AUDMUX_V2
 	select ARCH_HAS_CPUFREQ
+	select ARCH_MX5
 	select ARCH_MX50
 
 config	SOC_IMX51
 	bool
+	select CPU_V7
+	select ARM_L1_CACHE_SHIFT_6
 	select MXC_TZIC
 	select ARCH_MXC_IOMUX_V3
 	select ARCH_MXC_AUDMUX_V2
 	select ARCH_HAS_CPUFREQ
-	select ARCH_MX51
+	select ARCH_MX5
 
 config	SOC_IMX53
 	bool
+	select CPU_V7
+	select ARM_L1_CACHE_SHIFT_6
 	select MXC_TZIC
 	select ARCH_MXC_IOMUX_V3
+	select ARCH_MX5
 	select ARCH_MX53
 
-comment "MX5 platforms:"
+if ARCH_MX50_SUPPORTED
+#comment "i.MX50 machines:"
+
+config MACH_MX50_RDP
+	bool "Support MX50 reference design platform"
+	depends on BROKEN
+	select SOC_IMX50
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select IMX_HAVE_PLATFORM_FEC
+	help
+	  Include support for MX50 reference design platform (RDP) board. This
+	  includes specific configurations for the board and its peripherals.
+
+endif # ARCH_MX50_SUPPORTED
+
+if ARCH_MX51
+comment "i.MX51 machines:"
 
 config MACH_MX51_BABBAGE
 	bool "Support MX51 BABBAGE platforms"
@@ -136,6 +163,11 @@ config MACH_MX51_EFIKASB
 	  Include support for Genesi Efika Smartbook. This includes specific
 	  configurations for the board and its peripherals.
 
+endif # ARCH_MX51
+
+if ARCH_MX53_SUPPORTED
+comment "i.MX53 machines:"
+
 config MACH_MX53_EVK
 	bool "Support MX53 EVK platforms"
 	select SOC_IMX53
@@ -154,6 +186,7 @@ config MACH_MX53_SMD
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	help
 	  Include support for MX53 SMD platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -170,17 +203,6 @@ config MACH_MX53_LOCO
 	  Include support for MX53 LOCO platform. This includes specific
 	  configurations for the board and its peripherals.
 
-config MACH_MX50_RDP
-	bool "Support MX50 reference design platform"
-	depends on BROKEN
-	select SOC_IMX50
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	select IMX_HAVE_PLATFORM_FEC
-	help
-	  Include support for MX50 reference design platform (RDP) board. This
-	  includes specific configurations for the board and its peripherals.
+endif # ARCH_MX53_SUPPORTED
 
 endif

arch/arm/mach-mx5/board-cpuimx51.c

@@ -23,13 +23,11 @@
 #include <linux/io.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
-#include <linux/fsl_devices.h>
 
 #include <mach/eukrea-baseboards.h>
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/iomux-mx51.h>
-#include <mach/mxc_ehci.h>
 
 #include <asm/irq.h>
 #include <asm/setup.h>

arch/arm/mach-mx5/board-cpuimx51sd.c

@@ -23,7 +23,6 @@
 #include <linux/io.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
-#include <linux/fsl_devices.h>
 #include <linux/i2c-gpio.h>
 #include <linux/spi/spi.h>
 #include <linux/can/platform/mcp251x.h>
@@ -32,7 +31,6 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/iomux-mx51.h>
-#include <mach/mxc_ehci.h>
 
 #include <asm/irq.h>
 #include <asm/setup.h>

arch/arm/mach-mx5/board-mx50_rdp.c

@@ -23,7 +23,6 @@
 #include <linux/gpio.h>
 #include <linux/delay.h>
 #include <linux/io.h>
-#include <linux/fsl_devices.h>
 
 #include <mach/common.h>
 #include <mach/hardware.h>

arch/arm/mach-mx5/board-mx51_babbage.c

@@ -16,9 +16,6 @@
 #include <linux/gpio.h>
 #include <linux/delay.h>
 #include <linux/io.h>
-#include <linux/fsl_devices.h>
-#include <linux/fec.h>
-#include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/spi/flash.h>
 #include <linux/spi/spi.h>
@@ -26,7 +23,6 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/iomux-mx51.h>
-#include <mach/mxc_ehci.h>
 
 #include <asm/irq.h>
 #include <asm/setup.h>
@@ -208,18 +204,16 @@ static inline void babbage_usbhub_reset(void)
 {
 	int ret;
 
-	/* Bring USB hub out of reset */
-	ret = gpio_request(BABBAGE_USB_HUB_RESET, "GPIO1_7");
+	/* Reset USB hub */
+	ret = gpio_request_one(BABBAGE_USB_HUB_RESET,
+					GPIOF_OUT_INIT_LOW, "GPIO1_7");
 	if (ret) {
 		printk(KERN_ERR"failed to get GPIO_USB_HUB_RESET: %d\n", ret);
 		return;
 	}
-	gpio_direction_output(BABBAGE_USB_HUB_RESET, 0);
 
-	/* USB HUB RESET - De-assert USB HUB RESET_N */
-	msleep(1);
-	gpio_set_value(BABBAGE_USB_HUB_RESET, 0);
-	msleep(1);
+	msleep(2);
+	/* Deassert reset */
 	gpio_set_value(BABBAGE_USB_HUB_RESET, 1);
 }
 
@@ -361,7 +355,7 @@ static void __init mx51_babbage_init(void)
 
 	/* Set the PAD settings for the pwr key. */
 	mxc_iomux_v3_setup_pad(power_key);
-	imx51_add_gpio_keys(&imx_button_data);
+	imx_add_gpio_keys(&imx_button_data);
 
 	imx51_add_imx_i2c(0, &babbage_i2c_data);
 	imx51_add_imx_i2c(1, &babbage_i2c_data);

arch/arm/mach-mx5/board-mx51_efikamx.c

@@ -22,7 +22,6 @@
 #include <linux/input.h>
 #include <linux/delay.h>
 #include <linux/io.h>
-#include <linux/fsl_devices.h>
 #include <linux/spi/flash.h>
 #include <linux/spi/spi.h>
 #include <linux/mfd/mc13892.h>
@@ -32,8 +31,6 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/iomux-mx51.h>
-#include <mach/i2c.h>
-#include <mach/mxc_ehci.h>
 
 #include <asm/irq.h>
 #include <asm/setup.h>
@@ -252,7 +249,7 @@ static void __init mx51_efikamx_init(void)
 	}
 
 	platform_device_register(&mx51_efikamx_leds_device);
-	imx51_add_gpio_keys(&mx51_efikamx_powerkey_data);
+	imx_add_gpio_keys(&mx51_efikamx_powerkey_data);
 
 	if (system_rev == 0x11) {
 		gpio_request(EFIKAMX_RESET1_1, "reset");

arch/arm/mach-mx5/board-mx51_efikasb.c

@@ -22,7 +22,6 @@
 #include <linux/input.h>
 #include <linux/delay.h>
 #include <linux/io.h>
-#include <linux/fsl_devices.h>
 #include <linux/spi/flash.h>
 #include <linux/spi/spi.h>
 #include <linux/mfd/mc13892.h>
@@ -35,8 +34,6 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/iomux-mx51.h>
-#include <mach/i2c.h>
-#include <mach/mxc_ehci.h>
 
 #include <asm/irq.h>
 #include <asm/setup.h>
@@ -260,7 +257,7 @@ static void __init efikasb_board_init(void)
 	imx51_add_sdhci_esdhc_imx(1, NULL);
 
 	platform_device_register(&mx51_efikasb_leds_device);
-	imx51_add_gpio_keys(&mx51_efikasb_keys_data);
+	imx_add_gpio_keys(&mx51_efikasb_keys_data);
 
 }
 

arch/arm/mach-mx5/board-mx53_evk.c

@@ -21,7 +21,6 @@
 
 #include <linux/init.h>
 #include <linux/clk.h>
-#include <linux/fec.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
 #include <linux/spi/flash.h>
@@ -31,7 +30,6 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx53.h>
 
 #define MX53_EVK_FEC_PHY_RST	IMX_GPIO_NR(7, 6)

arch/arm/mach-mx5/board-mx53_loco.c

@@ -20,13 +20,11 @@
 
 #include <linux/init.h>
 #include <linux/clk.h>
-#include <linux/fec.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
 
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx53.h>
 
 #include <asm/mach-types.h>

arch/arm/mach-mx5/board-mx53_smd.c

@@ -20,13 +20,11 @@
 
 #include <linux/init.h>
 #include <linux/clk.h>
-#include <linux/fec.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
 
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx53.h>
 
 #include <asm/mach-types.h>
@@ -52,6 +50,31 @@ static iomux_v3_cfg_t mx53_smd_pads[] = {
 	/* I2C1 */
 	MX53_PAD_CSI0_DAT8__I2C1_SDA,
 	MX53_PAD_CSI0_DAT9__I2C1_SCL,
+	/* SD1 */
+	MX53_PAD_SD1_CMD__ESDHC1_CMD,
+	MX53_PAD_SD1_CLK__ESDHC1_CLK,
+	MX53_PAD_SD1_DATA0__ESDHC1_DAT0,
+	MX53_PAD_SD1_DATA1__ESDHC1_DAT1,
+	MX53_PAD_SD1_DATA2__ESDHC1_DAT2,
+	MX53_PAD_SD1_DATA3__ESDHC1_DAT3,
+	/* SD2 */
+	MX53_PAD_SD2_CMD__ESDHC2_CMD,
+	MX53_PAD_SD2_CLK__ESDHC2_CLK,
+	MX53_PAD_SD2_DATA0__ESDHC2_DAT0,
+	MX53_PAD_SD2_DATA1__ESDHC2_DAT1,
+	MX53_PAD_SD2_DATA2__ESDHC2_DAT2,
+	MX53_PAD_SD2_DATA3__ESDHC2_DAT3,
+	/* SD3 */
+	MX53_PAD_PATA_DATA8__ESDHC3_DAT0,
+	MX53_PAD_PATA_DATA9__ESDHC3_DAT1,
+	MX53_PAD_PATA_DATA10__ESDHC3_DAT2,
+	MX53_PAD_PATA_DATA11__ESDHC3_DAT3,
+	MX53_PAD_PATA_DATA0__ESDHC3_DAT4,
+	MX53_PAD_PATA_DATA1__ESDHC3_DAT5,
+	MX53_PAD_PATA_DATA2__ESDHC3_DAT6,
+	MX53_PAD_PATA_DATA3__ESDHC3_DAT7,
+	MX53_PAD_PATA_IORDY__ESDHC3_CLK,
+	MX53_PAD_PATA_RESET_B__ESDHC3_CMD,
 };
 
 static const struct imxuart_platform_data mx53_smd_uart_data __initconst = {
@@ -97,6 +120,9 @@ static void __init mx53_smd_board_init(void)
 	imx53_add_fec(&mx53_smd_fec_data);
 	imx53_add_imx2_wdt(0, NULL);
 	imx53_add_imx_i2c(0, &mx53_smd_i2c_data);
+	imx53_add_sdhci_esdhc_imx(0, NULL);
+	imx53_add_sdhci_esdhc_imx(1, NULL);
+	imx53_add_sdhci_esdhc_imx(2, NULL);
 }
 
 static void __init mx53_smd_timer_init(void)

arch/arm/mach-mx5/clock-mx51-mx53.c

@@ -1563,6 +1563,7 @@ int __init mx53_clocks_init(unsigned long ckil, unsigned long osc,
 	clk_enable(&iim_clk);
 	mx53_revision();
 	clk_disable(&iim_clk);
+	mx53_display_revision();
 
 	/* Set SDHC parents to be PLL2 */
 	clk_set_parent(&esdhc1_clk, &pll2_sw_clk);

arch/arm/mach-mx5/cpu.c

@@ -166,6 +166,29 @@ int mx50_revision(void)
 }
 EXPORT_SYMBOL(mx50_revision);
 
+void mx53_display_revision(void)
+{
+	int rev;
+	char *srev;
+	rev = mx53_revision();
+
+	switch (rev) {
+	case IMX_CHIP_REVISION_1_0:
+		srev = IMX_CHIP_REVISION_1_0_STRING;
+		break;
+	case IMX_CHIP_REVISION_2_0:
+		srev = IMX_CHIP_REVISION_2_0_STRING;
+		break;
+	case IMX_CHIP_REVISION_2_1:
+		srev = IMX_CHIP_REVISION_2_1_STRING;
+		break;
+	default:
+		srev = IMX_CHIP_REVISION_UNKNOWN_STRING;
+	}
+	printk(KERN_INFO "CPU identified as i.MX53, silicon rev %s\n", srev);
+}
+EXPORT_SYMBOL(mx53_display_revision);
+
 static int __init post_cpu_init(void)
 {
 	unsigned int reg;

arch/arm/mach-mx5/devices-imx50.h

@@ -21,14 +21,14 @@
 #include <mach/mx50.h>
 #include <mach/devices-common.h>
 
-extern const struct imx_imx_uart_1irq_data imx50_imx_uart_data[] __initconst;
+extern const struct imx_imx_uart_1irq_data imx50_imx_uart_data[];
 #define imx50_add_imx_uart(id, pdata)	\
 	imx_add_imx_uart_1irq(&imx50_imx_uart_data[id], pdata)
 
-extern const struct imx_fec_data imx50_fec_data __initconst;
+extern const struct imx_fec_data imx50_fec_data;
 #define imx50_add_fec(pdata)	\
 	imx_add_fec(&imx50_fec_data, pdata)
 
-extern const struct imx_imx_i2c_data imx50_imx_i2c_data[] __initconst;
+extern const struct imx_imx_i2c_data imx50_imx_i2c_data[];
 #define imx50_add_imx_i2c(id, pdata)	\
 	imx_add_imx_i2c(&imx50_imx_i2c_data[id], pdata)

arch/arm/mach-mx5/devices-imx51.h

@@ -9,49 +9,46 @@
 #include <mach/mx51.h>
 #include <mach/devices-common.h>
 
-extern const struct imx_fec_data imx51_fec_data __initconst;
+extern const struct imx_fec_data imx51_fec_data;
 #define imx51_add_fec(pdata)	\
 	imx_add_fec(&imx51_fec_data, pdata)
 
-#define imx51_add_gpio_keys(pdata) imx_add_gpio_keys(pdata)
-
-extern const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst;
+extern const struct imx_imx_i2c_data imx51_imx_i2c_data[];
 #define imx51_add_imx_i2c(id, pdata)	\
 	imx_add_imx_i2c(&imx51_imx_i2c_data[id], pdata)
 
-extern const struct imx_imx_ssi_data imx51_imx_ssi_data[] __initconst;
+extern const struct imx_imx_ssi_data imx51_imx_ssi_data[];
 #define imx51_add_imx_ssi(id, pdata)	\
 	imx_add_imx_ssi(&imx51_imx_ssi_data[id], pdata)
 
-extern const struct imx_imx_uart_1irq_data imx51_imx_uart_data[] __initconst;
+extern const struct imx_imx_uart_1irq_data imx51_imx_uart_data[];
 #define imx51_add_imx_uart(id, pdata)	\
 	imx_add_imx_uart_1irq(&imx51_imx_uart_data[id], pdata)
 
-extern const struct imx_mxc_nand_data imx51_mxc_nand_data __initconst;
+extern const struct imx_mxc_nand_data imx51_mxc_nand_data;
 #define imx51_add_mxc_nand(pdata)	\
 	imx_add_mxc_nand(&imx51_mxc_nand_data, pdata)
 
-extern const struct imx_sdhci_esdhc_imx_data
-imx51_sdhci_esdhc_imx_data[] __initconst;
+extern const struct imx_sdhci_esdhc_imx_data imx51_sdhci_esdhc_imx_data[];
 #define imx51_add_sdhci_esdhc_imx(id, pdata)	\
 	imx_add_sdhci_esdhc_imx(&imx51_sdhci_esdhc_imx_data[id], pdata)
 
-extern const struct imx_spi_imx_data imx51_cspi_data __initconst;
+extern const struct imx_spi_imx_data imx51_cspi_data;
 #define imx51_add_cspi(pdata)	\
 	imx_add_spi_imx(&imx51_cspi_data, pdata)
 
-extern const struct imx_spi_imx_data imx51_ecspi_data[] __initconst;
+extern const struct imx_spi_imx_data imx51_ecspi_data[];
 #define imx51_add_ecspi(id, pdata)	\
 	imx_add_spi_imx(&imx51_ecspi_data[id], pdata)
 
-extern const struct imx_imx2_wdt_data imx51_imx2_wdt_data[] __initconst;
+extern const struct imx_imx2_wdt_data imx51_imx2_wdt_data[];
 #define imx51_add_imx2_wdt(id, pdata)	\
 	imx_add_imx2_wdt(&imx51_imx2_wdt_data[id])
 
-extern const struct imx_mxc_pwm_data imx51_mxc_pwm_data[] __initconst;
+extern const struct imx_mxc_pwm_data imx51_mxc_pwm_data[];
 #define imx51_add_mxc_pwm(id)	\
 	imx_add_mxc_pwm(&imx51_mxc_pwm_data[id])
 
-extern const struct imx_imx_keypad_data imx51_imx_keypad_data __initconst;
+extern const struct imx_imx_keypad_data imx51_imx_keypad_data;
 #define imx51_add_imx_keypad(pdata)	\
 	imx_add_imx_keypad(&imx51_imx_keypad_data, pdata)

arch/arm/mach-mx5/devices-imx53.h

@@ -8,28 +8,27 @@
 #include <mach/mx53.h>
 #include <mach/devices-common.h>
 
-extern const struct imx_fec_data imx53_fec_data __initconst;
+extern const struct imx_fec_data imx53_fec_data;
 #define imx53_add_fec(pdata)   \
 	imx_add_fec(&imx53_fec_data, pdata)
 
-extern const struct imx_imx_uart_1irq_data imx53_imx_uart_data[] __initconst;
+extern const struct imx_imx_uart_1irq_data imx53_imx_uart_data[];
 #define imx53_add_imx_uart(id, pdata)	\
 	imx_add_imx_uart_1irq(&imx53_imx_uart_data[id], pdata)
 
 
-extern const struct imx_imx_i2c_data imx53_imx_i2c_data[] __initconst;
+extern const struct imx_imx_i2c_data imx53_imx_i2c_data[];
 #define imx53_add_imx_i2c(id, pdata)	\
 	imx_add_imx_i2c(&imx53_imx_i2c_data[id], pdata)
 
-extern const struct imx_sdhci_esdhc_imx_data
-imx53_sdhci_esdhc_imx_data[] __initconst;
+extern const struct imx_sdhci_esdhc_imx_data imx53_sdhci_esdhc_imx_data[];
 #define imx53_add_sdhci_esdhc_imx(id, pdata)	\
 	imx_add_sdhci_esdhc_imx(&imx53_sdhci_esdhc_imx_data[id], pdata)
 
-extern const struct imx_spi_imx_data imx53_ecspi_data[] __initconst;
+extern const struct imx_spi_imx_data imx53_ecspi_data[];
 #define imx53_add_ecspi(id, pdata)	\
 	imx_add_spi_imx(&imx53_ecspi_data[id], pdata)
 
-extern const struct imx_imx2_wdt_data imx53_imx2_wdt_data[] __initconst;
+extern const struct imx_imx2_wdt_data imx53_imx2_wdt_data[];
 #define imx53_add_imx2_wdt(id, pdata)	\
 	imx_add_imx2_wdt(&imx53_imx2_wdt_data[id])

arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c

@@ -18,13 +18,11 @@
 #include <linux/io.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
-#include <linux/fsl_devices.h>
 #include <linux/i2c/tsc2007.h>
 #include <linux/leds.h>
 
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx51.h>
 
 #include <asm/mach/arch.h>

arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c

@@ -27,7 +27,6 @@
 #include <linux/irq.h>
 #include <linux/leds.h>
 #include <linux/platform_device.h>
-#include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/i2c.h>
 
@@ -38,7 +37,6 @@
 
 #include <mach/hardware.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx51.h>
 #include <mach/audmux.h>
 
@@ -108,23 +106,14 @@ static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
 	},
 };
 
-static struct gpio_keys_platform_data eukrea_mbimxsd_button_data = {
+static const struct gpio_keys_platform_data
+		eukrea_mbimxsd_button_data __initconst = {
 	.buttons	= eukrea_mbimxsd_gpio_buttons,
 	.nbuttons	= ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
 };
 
-static struct platform_device eukrea_mbimxsd_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &eukrea_mbimxsd_button_data,
-	}
-};
-
 static struct platform_device *platform_devices[] __initdata = {
 	&eukrea_mbimxsd_leds_gpio,
-	&eukrea_mbimxsd_button_device,
 };
 
 static const struct imxuart_platform_data uart_pdata __initconst = {
@@ -166,4 +155,5 @@ void __init eukrea_mbimxsd51_baseboard_init(void)
 				ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
 
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+	imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
 }

arch/arm/mach-mx5/mx51_efika.c

@@ -20,7 +20,6 @@
 #include <linux/input.h>
 #include <linux/delay.h>
 #include <linux/io.h>
-#include <linux/fsl_devices.h>
 #include <linux/spi/flash.h>
 #include <linux/spi/spi.h>
 #include <linux/mfd/mc13892.h>
@@ -30,8 +29,6 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/iomux-mx51.h>
-#include <mach/i2c.h>
-#include <mach/mxc_ehci.h>
 
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>

arch/arm/mach-mxc91231/Kconfig

@@ -1,11 +0,0 @@
-if ARCH_MXC91231
-
-comment "MXC91231 platforms:"
-
-config MACH_MAGX_ZN5
-	bool "Support Motorola Zn5 GSM phone"
-	default n
-	help
-	  Include support for Motorola Zn5 GSM phone.
-
-endif

arch/arm/mach-mxc91231/Makefile

@@ -1,2 +0,0 @@
-obj-y	:= mm.o clock.o devices.o system.o iomux.o
-obj-$(CONFIG_MACH_MAGX_ZN5) += magx-zn5.o

arch/arm/mach-mxc91231/Makefile.boot

@@ -1,3 +0,0 @@
-   zreladdr-y	:= 0x90008000
-params_phys-y	:= 0x90000100
-initrd_phys-y	:= 0x90800000

arch/arm/mach-mxc91231/clock.c

@@ -1,640 +0,0 @@
-#include <linux/clk.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-
-#include <mach/clock.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-
-#include <asm/bug.h>
-#include <asm/div64.h>
-
-#include "crm_regs.h"
-
-#define CRM_SMALL_DIVIDER(base, name) \
-	crm_small_divider(base, \
-			  base ## _ ## name ## _OFFSET, \
-			  base ## _ ## name ## _MASK)
-#define CRM_1DIVIDER(base, name) \
-	crm_divider(base, \
-		    base ## _ ## name ## _OFFSET, \
-		    base ## _ ## name ## _MASK, 1)
-#define CRM_16DIVIDER(base, name) \
-	crm_divider(base, \
-		    base ## _ ## name ## _OFFSET, \
-		    base ## _ ## name ## _MASK, 16)
-
-static u32 crm_small_divider(void __iomem *reg, u8 offset, u32 mask)
-{
-	static const u32 crm_small_dividers[] = {
-		2, 3, 4, 5, 6, 8, 10, 12
-	};
-	u8 idx;
-
-	idx = (__raw_readl(reg) & mask) >> offset;
-	if (idx > 7)
-		return 1;
-
-	return crm_small_dividers[idx];
-}
-
-static u32 crm_divider(void __iomem *reg, u8 offset, u32 mask, u32 z)
-{
-	u32 div;
-	div = (__raw_readl(reg) & mask) >> offset;
-	return div ? div : z;
-}
-
-static int _clk_1bit_enable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(clk->enable_reg);
-	reg |= 1 << clk->enable_shift;
-	__raw_writel(reg, clk->enable_reg);
-
-	return 0;
-}
-
-static void _clk_1bit_disable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(clk->enable_reg);
-	reg &= ~(1 << clk->enable_shift);
-	__raw_writel(reg, clk->enable_reg);
-}
-
-static int _clk_3bit_enable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(clk->enable_reg);
-	reg |= 0x7 << clk->enable_shift;
-	__raw_writel(reg, clk->enable_reg);
-
-	return 0;
-}
-
-static void _clk_3bit_disable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(clk->enable_reg);
-	reg &= ~(0x7 << clk->enable_shift);
-	__raw_writel(reg, clk->enable_reg);
-}
-
-static unsigned long ckih_rate;
-
-static unsigned long clk_ckih_get_rate(struct clk *clk)
-{
-	return ckih_rate;
-}
-
-static struct clk ckih_clk = {
-	.get_rate = clk_ckih_get_rate,
-};
-
-static unsigned long clk_ckih_x2_get_rate(struct clk *clk)
-{
-	return 2 * clk_get_rate(clk->parent);
-}
-
-static struct clk ckih_x2_clk = {
-	.parent = &ckih_clk,
-	.get_rate = clk_ckih_x2_get_rate,
-};
-
-static unsigned long clk_ckil_get_rate(struct clk *clk)
-{
-	return CKIL_CLK_FREQ;
-}
-
-static struct clk ckil_clk = {
-	.get_rate = clk_ckil_get_rate,
-};
-
-/* plls stuff */
-static struct clk mcu_pll_clk;
-static struct clk dsp_pll_clk;
-static struct clk usb_pll_clk;
-
-static struct clk *pll_clk(u8 sel)
-{
-	switch (sel) {
-	case 0:
-		return &mcu_pll_clk;
-	case 1:
-		return &dsp_pll_clk;
-	case 2:
-		return &usb_pll_clk;
-	}
-	BUG();
-}
-
-static void __iomem *pll_base(struct clk *clk)
-{
-	if (clk == &mcu_pll_clk)
-		return MXC_PLL0_BASE;
-	else if (clk == &dsp_pll_clk)
-		return MXC_PLL1_BASE;
-	else if (clk == &usb_pll_clk)
-		return MXC_PLL2_BASE;
-	BUG();
-}
-
-static unsigned long clk_pll_get_rate(struct clk *clk)
-{
-	const void __iomem *pllbase;
-	unsigned long dp_op, dp_mfd, dp_mfn, pll_hfsm, ref_clk, mfi;
-	long mfn, mfn_abs, mfd, pdf;
-	s64 temp;
-	pllbase = pll_base(clk);
-
-	pll_hfsm = __raw_readl(pllbase + MXC_PLL_DP_CTL) & MXC_PLL_DP_CTL_HFSM;
-	if (pll_hfsm == 0) {
-		dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
-		dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
-		dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
-	} else {
-		dp_op = __raw_readl(pllbase + MXC_PLL_DP_HFS_OP);
-		dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFD);
-		dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFN);
-	}
-
-	pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK;
-	mfi = (dp_op >> MXC_PLL_DP_OP_MFI_OFFSET) & MXC_PLL_DP_OP_PDF_MASK;
-	mfi = (mfi <= 5) ? 5 : mfi;
-	mfd = dp_mfd & MXC_PLL_DP_MFD_MASK;
-	mfn = dp_mfn & MXC_PLL_DP_MFN_MASK;
-	mfn = (mfn <= 0x4000000) ? mfn : (mfn - 0x10000000);
-
-	if (mfn < 0)
-		mfn_abs = -mfn;
-	else
-		mfn_abs = mfn;
-
-/* XXX: actually this asumes that ckih is fed to pll, but spec says
- * that ckih_x2 is also possible. need to check this out.
- */
-	ref_clk = clk_get_rate(&ckih_clk);
-
-	ref_clk *= 2;
-	ref_clk /= pdf + 1;
-
-	temp = (u64) ref_clk * mfn_abs;
-	do_div(temp, mfd);
-	if (mfn < 0)
-		temp = -temp;
-	temp += ref_clk * mfi;
-
-	return temp;
-}
-
-static int clk_pll_enable(struct clk *clk)
-{
-	void __iomem *ctl;
-	u32 reg;
-
-	ctl = pll_base(clk);
-	reg = __raw_readl(ctl);
-	reg |= (MXC_PLL_DP_CTL_RST | MXC_PLL_DP_CTL_UPEN);
-	__raw_writel(reg, ctl);
-	do {
-		reg = __raw_readl(ctl);
-	} while ((reg & MXC_PLL_DP_CTL_LRF) != MXC_PLL_DP_CTL_LRF);
-	return 0;
-}
-
-static void clk_pll_disable(struct clk *clk)
-{
-	void __iomem *ctl;
-	u32 reg;
-
-	ctl = pll_base(clk);
-	reg = __raw_readl(ctl);
-	reg &= ~(MXC_PLL_DP_CTL_RST | MXC_PLL_DP_CTL_UPEN);
-	__raw_writel(reg, ctl);
-}
-
-static struct clk mcu_pll_clk = {
-	.parent = &ckih_clk,
-	.get_rate = clk_pll_get_rate,
-	.enable = clk_pll_enable,
-	.disable = clk_pll_disable,
-};
-
-static struct clk dsp_pll_clk = {
-	.parent = &ckih_clk,
-	.get_rate = clk_pll_get_rate,
-	.enable = clk_pll_enable,
-	.disable = clk_pll_disable,
-};
-
-static struct clk usb_pll_clk = {
-	.parent = &ckih_clk,
-	.get_rate = clk_pll_get_rate,
-	.enable = clk_pll_enable,
-	.disable = clk_pll_disable,
-};
-/* plls stuff end */
-
-/* ap_ref_clk stuff */
-static struct clk ap_ref_clk;
-
-static unsigned long clk_ap_ref_get_rate(struct clk *clk)
-{
-	u32 ascsr, acsr;
-	u8 ap_pat_ref_div_2, ap_isel, acs, ads;
-
-	ascsr = __raw_readl(MXC_CRMAP_ASCSR);
-	acsr = __raw_readl(MXC_CRMAP_ACSR);
-
-	/* 0 for ckih, 1 for ckih*2 */
-	ap_isel = ascsr & MXC_CRMAP_ASCSR_APISEL;
-	/* reg divider */
-	ap_pat_ref_div_2 = (ascsr >> MXC_CRMAP_ASCSR_AP_PATDIV2_OFFSET) & 0x1;
-	/* undocumented, 1 for disabling divider */
-	ads = (acsr >> MXC_CRMAP_ACSR_ADS_OFFSET) & 0x1;
-	/* 0 for pat_ref, 1 for divider out */
-	acs = acsr & MXC_CRMAP_ACSR_ACS;
-
-	if (acs & !ads)
-		/* use divided clock */
-		return clk_get_rate(clk->parent) / (ap_pat_ref_div_2 ? 2 : 1);
-
-	return clk_get_rate(clk->parent) * (ap_isel ? 2 : 1);
-}
-
-static struct clk ap_ref_clk = {
-	.parent = &ckih_clk,
-	.get_rate = clk_ap_ref_get_rate,
-};
-/* ap_ref_clk stuff end */
-
-/* ap_pre_dfs_clk stuff */
-static struct clk ap_pre_dfs_clk;
-
-static unsigned long clk_ap_pre_dfs_get_rate(struct clk *clk)
-{
-	u32 acsr, ascsr;
-
-	acsr = __raw_readl(MXC_CRMAP_ACSR);
-	ascsr = __raw_readl(MXC_CRMAP_ASCSR);
-
-	if (acsr & MXC_CRMAP_ACSR_ACS) {
-		u8 sel;
-		sel = (ascsr & MXC_CRMAP_ASCSR_APSEL_MASK) >>
-			MXC_CRMAP_ASCSR_APSEL_OFFSET;
-		return clk_get_rate(pll_clk(sel)) /
-			CRM_SMALL_DIVIDER(MXC_CRMAP_ACDR, ARMDIV);
-	}
-	return clk_get_rate(&ap_ref_clk);
-}
-
-static struct clk ap_pre_dfs_clk = {
-	.get_rate = clk_ap_pre_dfs_get_rate,
-};
-/* ap_pre_dfs_clk stuff end */
-
-/* usb_clk stuff */
-static struct clk usb_clk;
-
-static struct clk *clk_usb_parent(struct clk *clk)
-{
-	u32 acsr, ascsr;
-
-	acsr = __raw_readl(MXC_CRMAP_ACSR);
-	ascsr = __raw_readl(MXC_CRMAP_ASCSR);
-
-	if (acsr & MXC_CRMAP_ACSR_ACS) {
-		u8 sel;
-		sel = (ascsr & MXC_CRMAP_ASCSR_USBSEL_MASK) >>
-			MXC_CRMAP_ASCSR_USBSEL_OFFSET;
-		return pll_clk(sel);
-	}
-	return &ap_ref_clk;
-}
-
-static unsigned long clk_usb_get_rate(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) /
-		CRM_SMALL_DIVIDER(MXC_CRMAP_ACDER2, USBDIV);
-}
-
-static struct clk usb_clk = {
-	.enable_reg = MXC_CRMAP_ACDER2,
-	.enable_shift = MXC_CRMAP_ACDER2_USBEN_OFFSET,
-	.get_rate = clk_usb_get_rate,
-	.enable = _clk_1bit_enable,
-	.disable = _clk_1bit_disable,
-};
-/* usb_clk stuff end */
-
-static unsigned long clk_ipg_get_rate(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) / CRM_16DIVIDER(MXC_CRMAP_ACDR, IPDIV);
-}
-
-static unsigned long clk_ahb_get_rate(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) /
-		CRM_16DIVIDER(MXC_CRMAP_ACDR, AHBDIV);
-}
-
-static struct clk ipg_clk = {
-	.parent = &ap_pre_dfs_clk,
-	.get_rate = clk_ipg_get_rate,
-};
-
-static struct clk ahb_clk = {
-	.parent = &ap_pre_dfs_clk,
-	.get_rate = clk_ahb_get_rate,
-};
-
-/* perclk_clk stuff */
-static struct clk perclk_clk;
-
-static unsigned long clk_perclk_get_rate(struct clk *clk)
-{
-	u32 acder2;
-
-	acder2 = __raw_readl(MXC_CRMAP_ACDER2);
-	if (acder2 & MXC_CRMAP_ACDER2_BAUD_ISEL_MASK)
-		return 2 * clk_get_rate(clk->parent);
-
-	return clk_get_rate(clk->parent);
-}
-
-static struct clk perclk_clk = {
-	.parent = &ckih_clk,
-	.get_rate = clk_perclk_get_rate,
-};
-/* perclk_clk stuff end */
-
-/* uart_clk stuff */
-static struct clk uart_clk[];
-
-static unsigned long clk_uart_get_rate(struct clk *clk)
-{
-	u32 div;
-
-	switch (clk->id) {
-	case 0:
-	case 1:
-		div = CRM_SMALL_DIVIDER(MXC_CRMAP_ACDER2, BAUDDIV);
-		break;
-	case 2:
-		div = CRM_SMALL_DIVIDER(MXC_CRMAP_APRA, UART3DIV);
-		break;
-	default:
-		BUG();
-	}
-	return clk_get_rate(clk->parent) / div;
-}
-
-static struct clk uart_clk[] = {
-	{
-		.id = 0,
-		.parent = &perclk_clk,
-		.enable_reg = MXC_CRMAP_APRA,
-		.enable_shift = MXC_CRMAP_APRA_UART1EN_OFFSET,
-		.get_rate = clk_uart_get_rate,
-		.enable = _clk_1bit_enable,
-		.disable = _clk_1bit_disable,
-	}, {
-		.id = 1,
-		.parent = &perclk_clk,
-		.enable_reg = MXC_CRMAP_APRA,
-		.enable_shift = MXC_CRMAP_APRA_UART2EN_OFFSET,
-		.get_rate = clk_uart_get_rate,
-		.enable = _clk_1bit_enable,
-		.disable = _clk_1bit_disable,
-	}, {
-		.id = 2,
-		.parent = &perclk_clk,
-		.enable_reg = MXC_CRMAP_APRA,
-		.enable_shift = MXC_CRMAP_APRA_UART3EN_OFFSET,
-		.get_rate = clk_uart_get_rate,
-		.enable = _clk_1bit_enable,
-		.disable = _clk_1bit_disable,
-	},
-};
-/* uart_clk stuff end */
-
-/* sdhc_clk stuff */
-static struct clk nfc_clk;
-
-static unsigned long clk_nfc_get_rate(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) /
-		CRM_1DIVIDER(MXC_CRMAP_ACDER2, NFCDIV);
-}
-
-static struct clk nfc_clk = {
-	.parent = &ahb_clk,
-	.enable_reg = MXC_CRMAP_ACDER2,
-	.enable_shift = MXC_CRMAP_ACDER2_NFCEN_OFFSET,
-	.get_rate = clk_nfc_get_rate,
-	.enable = _clk_1bit_enable,
-	.disable = _clk_1bit_disable,
-};
-/* sdhc_clk stuff end */
-
-/* sdhc_clk stuff */
-static struct clk sdhc_clk[];
-
-static struct clk *clk_sdhc_parent(struct clk *clk)
-{
-	u32 aprb;
-	u8 sel;
-	u32 mask;
-	int offset;
-
-	aprb = __raw_readl(MXC_CRMAP_APRB);
-
-	switch (clk->id) {
-	case 0:
-		mask = MXC_CRMAP_APRB_SDHC1_ISEL_MASK;
-		offset = MXC_CRMAP_APRB_SDHC1_ISEL_OFFSET;
-		break;
-	case 1:
-		mask = MXC_CRMAP_APRB_SDHC2_ISEL_MASK;
-		offset = MXC_CRMAP_APRB_SDHC2_ISEL_OFFSET;
-		break;
-	default:
-		BUG();
-	}
-	sel = (aprb & mask) >> offset;
-
-	switch (sel) {
-	case 0:
-		return &ckih_clk;
-	case 1:
-		return &ckih_x2_clk;
-	}
-	return &usb_clk;
-}
-
-static unsigned long clk_sdhc_get_rate(struct clk *clk)
-{
-	u32 div;
-
-	switch (clk->id) {
-	case 0:
-		div = CRM_SMALL_DIVIDER(MXC_CRMAP_APRB, SDHC1_DIV);
-		break;
-	case 1:
-		div = CRM_SMALL_DIVIDER(MXC_CRMAP_APRB, SDHC2_DIV);
-		break;
-	default:
-		BUG();
-	}
-
-	return clk_get_rate(clk->parent) / div;
-}
-
-static int clk_sdhc_enable(struct clk *clk)
-{
-	u32 amlpmre1, aprb;
-
-	amlpmre1 = __raw_readl(MXC_CRMAP_AMLPMRE1);
-	aprb = __raw_readl(MXC_CRMAP_APRB);
-	switch (clk->id) {
-	case 0:
-		amlpmre1 |= (0x7 << MXC_CRMAP_AMLPMRE1_MLPME4_OFFSET);
-		aprb |= (0x1 << MXC_CRMAP_APRB_SDHC1EN_OFFSET);
-		break;
-	case 1:
-		amlpmre1 |= (0x7 << MXC_CRMAP_AMLPMRE1_MLPME5_OFFSET);
-		aprb |= (0x1 << MXC_CRMAP_APRB_SDHC2EN_OFFSET);
-		break;
-	}
-	__raw_writel(amlpmre1, MXC_CRMAP_AMLPMRE1);
-	__raw_writel(aprb, MXC_CRMAP_APRB);
-	return 0;
-}
-
-static void clk_sdhc_disable(struct clk *clk)
-{
-	u32 amlpmre1, aprb;
-
-	amlpmre1 = __raw_readl(MXC_CRMAP_AMLPMRE1);
-	aprb = __raw_readl(MXC_CRMAP_APRB);
-	switch (clk->id) {
-	case 0:
-		amlpmre1 &= ~(0x7 << MXC_CRMAP_AMLPMRE1_MLPME4_OFFSET);
-		aprb &= ~(0x1 << MXC_CRMAP_APRB_SDHC1EN_OFFSET);
-		break;
-	case 1:
-		amlpmre1 &= ~(0x7 << MXC_CRMAP_AMLPMRE1_MLPME5_OFFSET);
-		aprb &= ~(0x1 << MXC_CRMAP_APRB_SDHC2EN_OFFSET);
-		break;
-	}
-	__raw_writel(amlpmre1, MXC_CRMAP_AMLPMRE1);
-	__raw_writel(aprb, MXC_CRMAP_APRB);
-}
-
-static struct clk sdhc_clk[] = {
-	{
-		.id = 0,
-		.get_rate = clk_sdhc_get_rate,
-		.enable = clk_sdhc_enable,
-		.disable = clk_sdhc_disable,
-	}, {
-		.id = 1,
-		.get_rate = clk_sdhc_get_rate,
-		.enable = clk_sdhc_enable,
-		.disable = clk_sdhc_disable,
-	},
-};
-/* sdhc_clk stuff end */
-
-/* wdog_clk stuff */
-static struct clk wdog_clk[] = {
-	{
-		.id = 0,
-		.parent = &ipg_clk,
-		.enable_reg = MXC_CRMAP_AMLPMRD,
-		.enable_shift = MXC_CRMAP_AMLPMRD_MLPMD7_OFFSET,
-		.enable = _clk_3bit_enable,
-		.disable = _clk_3bit_disable,
-	}, {
-		.id = 1,
-		.parent = &ipg_clk,
-		.enable_reg = MXC_CRMAP_AMLPMRD,
-		.enable_shift = MXC_CRMAP_AMLPMRD_MLPMD3_OFFSET,
-		.enable = _clk_3bit_enable,
-		.disable = _clk_3bit_disable,
-	},
-};
-/* wdog_clk stuff end */
-
-/* gpt_clk stuff */
-static struct clk gpt_clk = {
-	.parent = &ipg_clk,
-	.enable_reg = MXC_CRMAP_AMLPMRC,
-	.enable_shift = MXC_CRMAP_AMLPMRC_MLPMC4_OFFSET,
-	.enable = _clk_3bit_enable,
-	.disable = _clk_3bit_disable,
-};
-/* gpt_clk stuff end */
-
-/* cspi_clk stuff */
-static struct clk cspi_clk[] = {
-	{
-		.id = 0,
-		.parent = &ipg_clk,
-		.enable_reg = MXC_CRMAP_AMLPMRE2,
-		.enable_shift = MXC_CRMAP_AMLPMRE2_MLPME0_OFFSET,
-		.enable = _clk_3bit_enable,
-		.disable = _clk_3bit_disable,
-	}, {
-		.id = 1,
-		.parent = &ipg_clk,
-		.enable_reg = MXC_CRMAP_AMLPMRE1,
-		.enable_shift = MXC_CRMAP_AMLPMRE1_MLPME6_OFFSET,
-		.enable = _clk_3bit_enable,
-		.disable = _clk_3bit_disable,
-	},
-};
-/* cspi_clk stuff end */
-
-#define _REGISTER_CLOCK(d, n, c) \
-	{ \
-		.dev_id = d, \
-		.con_id = n, \
-		.clk = &c, \
-	},
-
-static struct clk_lookup lookups[] = {
-	_REGISTER_CLOCK("imx-uart.0", NULL, uart_clk[0])
-	_REGISTER_CLOCK("imx-uart.1", NULL, uart_clk[1])
-	_REGISTER_CLOCK("imx-uart.2", NULL, uart_clk[2])
-	_REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc_clk[0])
-	_REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc_clk[1])
-	_REGISTER_CLOCK("mxc-wdt.0", NULL, wdog_clk[0])
-	_REGISTER_CLOCK("spi_imx.0", NULL, cspi_clk[0])
-	_REGISTER_CLOCK("spi_imx.1", NULL, cspi_clk[1])
-};
-
-int __init mxc91231_clocks_init(unsigned long fref)
-{
-	void __iomem *gpt_base;
-
-	ckih_rate = fref;
-
-	usb_clk.parent = clk_usb_parent(&usb_clk);
-	sdhc_clk[0].parent = clk_sdhc_parent(&sdhc_clk[0]);
-	sdhc_clk[1].parent = clk_sdhc_parent(&sdhc_clk[1]);
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	gpt_base = MXC91231_IO_ADDRESS(MXC91231_GPT1_BASE_ADDR);
-	mxc_timer_init(&gpt_clk, gpt_base, MXC91231_INT_GPT);
-
-	return 0;
-}

arch/arm/mach-mxc91231/crm_regs.h

@@ -1,394 +0,0 @@
-/*
- * Copyright 2006 Freescale Semiconductor, Inc.
- * Copyright 2006-2007 Motorola, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef _ARCH_ARM_MACH_MXC91231_CRM_REGS_H_
-#define _ARCH_ARM_MACH_MXC91231_CRM_REGS_H_
-
-#define CKIL_CLK_FREQ			32768
-
-#define MXC_CRM_AP_BASE			MXC91231_IO_ADDRESS(MXC91231_CRM_AP_BASE_ADDR)
-#define MXC_CRM_COM_BASE		MXC91231_IO_ADDRESS(MXC91231_CRM_COM_BASE_ADDR)
-#define MXC_DSM_BASE			MXC91231_IO_ADDRESS(MXC91231_DSM_BASE_ADDR)
-#define MXC_PLL0_BASE			MXC91231_IO_ADDRESS(MXC91231_PLL0_BASE_ADDR)
-#define MXC_PLL1_BASE			MXC91231_IO_ADDRESS(MXC91231_PLL1_BASE_ADDR)
-#define MXC_PLL2_BASE			MXC91231_IO_ADDRESS(MXC91231_PLL2_BASE_ADDR)
-#define MXC_CLKCTL_BASE			MXC91231_IO_ADDRESS(MXC91231_CLKCTL_BASE_ADDR)
-
-/* PLL Register Offsets */
-#define MXC_PLL_DP_CTL			0x00
-#define MXC_PLL_DP_CONFIG		0x04
-#define MXC_PLL_DP_OP			0x08
-#define MXC_PLL_DP_MFD			0x0C
-#define MXC_PLL_DP_MFN			0x10
-#define MXC_PLL_DP_HFS_OP		0x1C
-#define MXC_PLL_DP_HFS_MFD		0x20
-#define MXC_PLL_DP_HFS_MFN		0x24
-
-/* PLL Register Bit definitions */
-#define MXC_PLL_DP_CTL_DPDCK0_2_EN	0x1000
-#define MXC_PLL_DP_CTL_ADE		0x800
-#define MXC_PLL_DP_CTL_REF_CLK_DIV	0x400
-#define MXC_PLL_DP_CTL_HFSM		0x80
-#define MXC_PLL_DP_CTL_PRE		0x40
-#define MXC_PLL_DP_CTL_UPEN		0x20
-#define MXC_PLL_DP_CTL_RST		0x10
-#define MXC_PLL_DP_CTL_RCP		0x8
-#define MXC_PLL_DP_CTL_PLM		0x4
-#define MXC_PLL_DP_CTL_BRM0		0x2
-#define MXC_PLL_DP_CTL_LRF		0x1
-
-#define MXC_PLL_DP_OP_MFI_OFFSET	4
-#define MXC_PLL_DP_OP_MFI_MASK		0xF
-#define MXC_PLL_DP_OP_PDF_OFFSET	0
-#define MXC_PLL_DP_OP_PDF_MASK		0xF
-
-#define MXC_PLL_DP_MFD_OFFSET		0
-#define MXC_PLL_DP_MFD_MASK		0x7FFFFFF
-
-#define MXC_PLL_DP_MFN_OFFSET		0
-#define MXC_PLL_DP_MFN_MASK		0x7FFFFFF
-
-/* CRM AP Register Offsets */
-#define MXC_CRMAP_ASCSR			(MXC_CRM_AP_BASE + 0x00)
-#define MXC_CRMAP_ACDR			(MXC_CRM_AP_BASE + 0x04)
-#define MXC_CRMAP_ACDER1		(MXC_CRM_AP_BASE + 0x08)
-#define MXC_CRMAP_ACDER2		(MXC_CRM_AP_BASE + 0x0C)
-#define MXC_CRMAP_ACGCR			(MXC_CRM_AP_BASE + 0x10)
-#define MXC_CRMAP_ACCGCR		(MXC_CRM_AP_BASE + 0x14)
-#define MXC_CRMAP_AMLPMRA		(MXC_CRM_AP_BASE + 0x18)
-#define MXC_CRMAP_AMLPMRB		(MXC_CRM_AP_BASE + 0x1C)
-#define MXC_CRMAP_AMLPMRC		(MXC_CRM_AP_BASE + 0x20)
-#define MXC_CRMAP_AMLPMRD		(MXC_CRM_AP_BASE + 0x24)
-#define MXC_CRMAP_AMLPMRE1		(MXC_CRM_AP_BASE + 0x28)
-#define MXC_CRMAP_AMLPMRE2		(MXC_CRM_AP_BASE + 0x2C)
-#define MXC_CRMAP_AMLPMRF		(MXC_CRM_AP_BASE + 0x30)
-#define MXC_CRMAP_AMLPMRG		(MXC_CRM_AP_BASE + 0x34)
-#define MXC_CRMAP_APGCR			(MXC_CRM_AP_BASE + 0x38)
-#define MXC_CRMAP_ACSR			(MXC_CRM_AP_BASE + 0x3C)
-#define MXC_CRMAP_ADCR			(MXC_CRM_AP_BASE + 0x40)
-#define MXC_CRMAP_ACR			(MXC_CRM_AP_BASE + 0x44)
-#define MXC_CRMAP_AMCR			(MXC_CRM_AP_BASE + 0x48)
-#define MXC_CRMAP_APCR			(MXC_CRM_AP_BASE + 0x4C)
-#define MXC_CRMAP_AMORA			(MXC_CRM_AP_BASE + 0x50)
-#define MXC_CRMAP_AMORB			(MXC_CRM_AP_BASE + 0x54)
-#define MXC_CRMAP_AGPR			(MXC_CRM_AP_BASE + 0x58)
-#define MXC_CRMAP_APRA			(MXC_CRM_AP_BASE + 0x5C)
-#define MXC_CRMAP_APRB			(MXC_CRM_AP_BASE + 0x60)
-#define MXC_CRMAP_APOR			(MXC_CRM_AP_BASE + 0x64)
-#define MXC_CRMAP_ADFMR			(MXC_CRM_AP_BASE + 0x68)
-
-/* CRM AP Register Bit definitions */
-#define MXC_CRMAP_ASCSR_CRS			0x10000
-#define MXC_CRMAP_ASCSR_AP_PATDIV2_OFFSET	15
-#define MXC_CRMAP_ASCSR_AP_PATREF_DIV2		0x8000
-#define MXC_CRMAP_ASCSR_USBSEL_OFFSET		13
-#define MXC_CRMAP_ASCSR_USBSEL_MASK		(0x3 << 13)
-#define MXC_CRMAP_ASCSR_CSISEL_OFFSET		11
-#define MXC_CRMAP_ASCSR_CSISEL_MASK		(0x3 << 11)
-#define MXC_CRMAP_ASCSR_SSI2SEL_OFFSET		7
-#define MXC_CRMAP_ASCSR_SSI2SEL_MASK		(0x3 << 7)
-#define MXC_CRMAP_ASCSR_SSI1SEL_OFFSET		5
-#define MXC_CRMAP_ASCSR_SSI1SEL_MASK		(0x3 << 5)
-#define MXC_CRMAP_ASCSR_APSEL_OFFSET		3
-#define MXC_CRMAP_ASCSR_APSEL_MASK		(0x3 << 3)
-#define MXC_CRMAP_ASCSR_AP_PATDIV1_OFFSET	2
-#define MXC_CRMAP_ASCSR_AP_PATREF_DIV1		0x4
-#define MXC_CRMAP_ASCSR_APISEL			0x1
-
-#define MXC_CRMAP_ACDR_ARMDIV_OFFSET		8
-#define MXC_CRMAP_ACDR_ARMDIV_MASK		(0xF << 8)
-#define MXC_CRMAP_ACDR_AHBDIV_OFFSET		4
-#define MXC_CRMAP_ACDR_AHBDIV_MASK		(0xF << 4)
-#define MXC_CRMAP_ACDR_IPDIV_OFFSET		0
-#define MXC_CRMAP_ACDR_IPDIV_MASK		0xF
-
-#define MXC_CRMAP_ACDER1_CSIEN_OFFSET		30
-#define MXC_CRMAP_ACDER1_CSIDIV_OFFSET		24
-#define MXC_CRMAP_ACDER1_CSIDIV_MASK		(0x3F << 24)
-#define MXC_CRMAP_ACDER1_SSI2EN_OFFSET		14
-#define MXC_CRMAP_ACDER1_SSI2DIV_OFFSET		8
-#define MXC_CRMAP_ACDER1_SSI2DIV_MASK		(0x3F << 8)
-#define MXC_CRMAP_ACDER1_SSI1EN_OFFSET		6
-#define MXC_CRMAP_ACDER1_SSI1DIV_OFFSET		0
-#define MXC_CRMAP_ACDER1_SSI1DIV_MASK		0x3F
-
-#define MXC_CRMAP_ACDER2_CRCT_CLK_DIV_OFFSET	24
-#define MXC_CRMAP_ACDER2_CRCT_CLK_DIV_MASK	(0x7 << 24)
-#define MXC_CRMAP_ACDER2_NFCEN_OFFSET		20
-#define MXC_CRMAP_ACDER2_NFCDIV_OFFSET		16
-#define MXC_CRMAP_ACDER2_NFCDIV_MASK		(0xF << 16)
-#define MXC_CRMAP_ACDER2_USBEN_OFFSET		12
-#define MXC_CRMAP_ACDER2_USBDIV_OFFSET		8
-#define MXC_CRMAP_ACDER2_USBDIV_MASK		(0xF << 8)
-#define MXC_CRMAP_ACDER2_BAUD_ISEL_OFFSET	5
-#define MXC_CRMAP_ACDER2_BAUD_ISEL_MASK		(0x3 << 5)
-#define MXC_CRMAP_ACDER2_BAUDDIV_OFFSET		0
-#define MXC_CRMAP_ACDER2_BAUDDIV_MASK		0xF
-
-#define MXC_CRMAP_AMLPMRA_MLPMA7_OFFSET		22
-#define MXC_CRMAP_AMLPMRA_MLPMA7_MASK		(0x7 << 22)
-#define MXC_CRMAP_AMLPMRA_MLPMA6_OFFSET		19
-#define MXC_CRMAP_AMLPMRA_MLPMA6_MASK		(0x7 << 19)
-#define MXC_CRMAP_AMLPMRA_MLPMA4_OFFSET		12
-#define MXC_CRMAP_AMLPMRA_MLPMA4_MASK		(0x7 << 12)
-#define MXC_CRMAP_AMLPMRA_MLPMA3_OFFSET		9
-#define MXC_CRMAP_AMLPMRA_MLPMA3_MASK		(0x7 << 9)
-#define MXC_CRMAP_AMLPMRA_MLPMA2_OFFSET		6
-#define MXC_CRMAP_AMLPMRA_MLPMA2_MASK		(0x7 << 6)
-#define MXC_CRMAP_AMLPMRA_MLPMA1_OFFSET		3
-#define MXC_CRMAP_AMLPMRA_MLPMA1_MASK		(0x7 << 3)
-
-#define MXC_CRMAP_AMLPMRB_MLPMB0_OFFSET		0
-#define MXC_CRMAP_AMLPMRB_MLPMB0_MASK		0x7
-
-#define MXC_CRMAP_AMLPMRC_MLPMC9_OFFSET		28
-#define MXC_CRMAP_AMLPMRC_MLPMC9_MASK		(0x7 << 28)
-#define MXC_CRMAP_AMLPMRC_MLPMC7_OFFSET		22
-#define MXC_CRMAP_AMLPMRC_MLPMC7_MASK		(0x7 << 22)
-#define MXC_CRMAP_AMLPMRC_MLPMC5_OFFSET		16
-#define MXC_CRMAP_AMLPMRC_MLPMC5_MASK		(0x7 << 16)
-#define MXC_CRMAP_AMLPMRC_MLPMC4_OFFSET		12
-#define MXC_CRMAP_AMLPMRC_MLPMC4_MASK		(0x7 << 12)
-#define MXC_CRMAP_AMLPMRC_MLPMC3_OFFSET		9
-#define MXC_CRMAP_AMLPMRC_MLPMC3_MASK		(0x7 << 9)
-#define MXC_CRMAP_AMLPMRC_MLPMC2_OFFSET		6
-#define MXC_CRMAP_AMLPMRC_MLPMC2_MASK		(0x7 << 6)
-#define MXC_CRMAP_AMLPMRC_MLPMC1_OFFSET		3
-#define MXC_CRMAP_AMLPMRC_MLPMC1_MASK		(0x7 << 3)
-#define MXC_CRMAP_AMLPMRC_MLPMC0_OFFSET		0
-#define MXC_CRMAP_AMLPMRC_MLPMC0_MASK		0x7
-
-#define MXC_CRMAP_AMLPMRD_MLPMD7_OFFSET		22
-#define MXC_CRMAP_AMLPMRD_MLPMD7_MASK		(0x7 << 22)
-#define MXC_CRMAP_AMLPMRD_MLPMD4_OFFSET		12
-#define MXC_CRMAP_AMLPMRD_MLPMD4_MASK		(0x7 << 12)
-#define MXC_CRMAP_AMLPMRD_MLPMD3_OFFSET		9
-#define MXC_CRMAP_AMLPMRD_MLPMD3_MASK		(0x7 << 9)
-#define MXC_CRMAP_AMLPMRD_MLPMD2_OFFSET		6
-#define MXC_CRMAP_AMLPMRD_MLPMD2_MASK		(0x7 << 6)
-#define MXC_CRMAP_AMLPMRD_MLPMD0_OFFSET		0
-#define MXC_CRMAP_AMLPMRD_MLPMD0_MASK		0x7
-
-#define MXC_CRMAP_AMLPMRE1_MLPME9_OFFSET	28
-#define MXC_CRMAP_AMLPMRE1_MLPME9_MASK		(0x7 << 28)
-#define MXC_CRMAP_AMLPMRE1_MLPME8_OFFSET	25
-#define MXC_CRMAP_AMLPMRE1_MLPME8_MASK		(0x7 << 25)
-#define MXC_CRMAP_AMLPMRE1_MLPME7_OFFSET	22
-#define MXC_CRMAP_AMLPMRE1_MLPME7_MASK		(0x7 << 22)
-#define MXC_CRMAP_AMLPMRE1_MLPME6_OFFSET	19
-#define MXC_CRMAP_AMLPMRE1_MLPME6_MASK		(0x7 << 19)
-#define MXC_CRMAP_AMLPMRE1_MLPME5_OFFSET	16
-#define MXC_CRMAP_AMLPMRE1_MLPME5_MASK		(0x7 << 16)
-#define MXC_CRMAP_AMLPMRE1_MLPME4_OFFSET	12
-#define MXC_CRMAP_AMLPMRE1_MLPME4_MASK		(0x7 << 12)
-#define MXC_CRMAP_AMLPMRE1_MLPME3_OFFSET	9
-#define MXC_CRMAP_AMLPMRE1_MLPME3_MASK		(0x7 << 9)
-#define MXC_CRMAP_AMLPMRE1_MLPME2_OFFSET	6
-#define MXC_CRMAP_AMLPMRE1_MLPME2_MASK		(0x7 << 6)
-#define MXC_CRMAP_AMLPMRE1_MLPME1_OFFSET	3
-#define MXC_CRMAP_AMLPMRE1_MLPME1_MASK		(0x7 << 3)
-#define MXC_CRMAP_AMLPMRE1_MLPME0_OFFSET	0
-#define MXC_CRMAP_AMLPMRE1_MLPME0_MASK		0x7
-
-#define MXC_CRMAP_AMLPMRE2_MLPME0_OFFSET	0
-#define MXC_CRMAP_AMLPMRE2_MLPME0_MASK		0x7
-
-#define MXC_CRMAP_AMLPMRF_MLPMF6_OFFSET		19
-#define MXC_CRMAP_AMLPMRF_MLPMF6_MASK		(0x7 << 19)
-#define MXC_CRMAP_AMLPMRF_MLPMF5_OFFSET		16
-#define MXC_CRMAP_AMLPMRF_MLPMF5_MASK		(0x7 << 16)
-#define MXC_CRMAP_AMLPMRF_MLPMF3_OFFSET		9
-#define MXC_CRMAP_AMLPMRF_MLPMF3_MASK		(0x7 << 9)
-#define MXC_CRMAP_AMLPMRF_MLPMF2_OFFSET		6
-#define MXC_CRMAP_AMLPMRF_MLPMF2_MASK		(0x7 << 6)
-#define MXC_CRMAP_AMLPMRF_MLPMF1_OFFSET		3
-#define MXC_CRMAP_AMLPMRF_MLPMF1_MASK		(0x7 << 3)
-#define MXC_CRMAP_AMLPMRF_MLPMF0_OFFSET		0
-#define MXC_CRMAP_AMLPMRF_MLPMF0_MASK		(0x7 << 0)
-
-#define MXC_CRMAP_AMLPMRG_MLPMG9_OFFSET		28
-#define MXC_CRMAP_AMLPMRG_MLPMG9_MASK		(0x7 << 28)
-#define MXC_CRMAP_AMLPMRG_MLPMG7_OFFSET		22
-#define MXC_CRMAP_AMLPMRG_MLPMG7_MASK		(0x7 << 22)
-#define MXC_CRMAP_AMLPMRG_MLPMG6_OFFSET		19
-#define MXC_CRMAP_AMLPMRG_MLPMG6_MASK		(0x7 << 19)
-#define MXC_CRMAP_AMLPMRG_MLPMG5_OFFSET		16
-#define MXC_CRMAP_AMLPMRG_MLPMG5_MASK		(0x7 << 16)
-#define MXC_CRMAP_AMLPMRG_MLPMG4_OFFSET		12
-#define MXC_CRMAP_AMLPMRG_MLPMG4_MASK		(0x7 << 12)
-#define MXC_CRMAP_AMLPMRG_MLPMG3_OFFSET		9
-#define MXC_CRMAP_AMLPMRG_MLPMG3_MASK		(0x7 << 9)
-#define MXC_CRMAP_AMLPMRG_MLPMG2_OFFSET		6
-#define MXC_CRMAP_AMLPMRG_MLPMG2_MASK		(0x7 << 6)
-#define MXC_CRMAP_AMLPMRG_MLPMG1_OFFSET		3
-#define MXC_CRMAP_AMLPMRG_MLPMG1_MASK		(0x7 << 3)
-#define MXC_CRMAP_AMLPMRG_MLPMG0_OFFSET		0
-#define MXC_CRMAP_AMLPMRG_MLPMG0_MASK		0x7
-
-#define MXC_CRMAP_AGPR_IPUPAD_OFFSET		20
-#define MXC_CRMAP_AGPR_IPUPAD_MASK		(0x7 << 20)
-
-#define MXC_CRMAP_APRA_EL1TEN_OFFSET		29
-#define MXC_CRMAP_APRA_SIMEN_OFFSET		24
-#define MXC_CRMAP_APRA_UART3DIV_OFFSET		17
-#define MXC_CRMAP_APRA_UART3DIV_MASK		(0xF << 17)
-#define MXC_CRMAP_APRA_UART3EN_OFFSET		16
-#define MXC_CRMAP_APRA_SAHARA_DIV2_CLKEN_OFFSET	14
-#define MXC_CRMAP_APRA_MQSPIEN_OFFSET		13
-#define MXC_CRMAP_APRA_UART2EN_OFFSET		8
-#define MXC_CRMAP_APRA_UART1EN_OFFSET		0
-
-#define MXC_CRMAP_APRB_SDHC2_ISEL_OFFSET	13
-#define MXC_CRMAP_APRB_SDHC2_ISEL_MASK		(0x7 << 13)
-#define MXC_CRMAP_APRB_SDHC2_DIV_OFFSET		9
-#define MXC_CRMAP_APRB_SDHC2_DIV_MASK		(0xF << 9)
-#define MXC_CRMAP_APRB_SDHC2EN_OFFSET		8
-#define MXC_CRMAP_APRB_SDHC1_ISEL_OFFSET	5
-#define MXC_CRMAP_APRB_SDHC1_ISEL_MASK		(0x7 << 5)
-#define MXC_CRMAP_APRB_SDHC1_DIV_OFFSET		1
-#define MXC_CRMAP_APRB_SDHC1_DIV_MASK		(0xF << 1)
-#define MXC_CRMAP_APRB_SDHC1EN_OFFSET		0
-
-#define MXC_CRMAP_ACSR_ADS_OFFSET		8
-#define MXC_CRMAP_ACSR_ADS			(0x1 << 8)
-#define MXC_CRMAP_ACSR_ACS			0x1
-
-#define MXC_CRMAP_ADCR_LFDF_0			(0x0 << 8)
-#define MXC_CRMAP_ADCR_LFDF_2			(0x1 << 8)
-#define MXC_CRMAP_ADCR_LFDF_4			(0x2 << 8)
-#define MXC_CRMAP_ADCR_LFDF_8			(0x3 << 8)
-#define MXC_CRMAP_ADCR_LFDF_OFFSET		8
-#define MXC_CRMAP_ADCR_LFDF_MASK		(0x3 << 8)
-#define MXC_CRMAP_ADCR_ALT_PLL			0x80
-#define MXC_CRMAP_ADCR_DFS_DIVEN		0x20
-#define MXC_CRMAP_ADCR_DIV_BYP			0x2
-#define MXC_CRMAP_ADCR_VSTAT			0x8
-#define MXC_CRMAP_ADCR_TSTAT			0x10
-#define MXC_CRMAP_ADCR_DVFS_VCTRL		0x10
-#define MXC_CRMAP_ADCR_CLK_ON			0x40
-
-#define MXC_CRMAP_ADFMR_FC_OFFSET		16
-#define MXC_CRMAP_ADFMR_FC_MASK			(0x1F << 16)
-#define MXC_CRMAP_ADFMR_MF_OFFSET		1
-#define MXC_CRMAP_ADFMR_MF_MASK			(0x3FF << 1)
-#define MXC_CRMAP_ADFMR_DFM_CLK_READY		0x1
-#define MXC_CRMAP_ADFMR_DFM_PWR_DOWN		0x8000
-
-#define MXC_CRMAP_ACR_CKOHS_HIGH		(1 << 18)
-#define MXC_CRMAP_ACR_CKOS_HIGH			(1 << 16)
-#define MXC_CRMAP_ACR_CKOHS_MASK		(0x7 << 12)
-#define MXC_CRMAP_ACR_CKOHD			(1 << 11)
-#define MXC_CRMAP_ACR_CKOHDIV_MASK		(0xF << 8)
-#define MXC_CRMAP_ACR_CKOHDIV_OFFSET		8
-#define MXC_CRMAP_ACR_CKOD			(1 << 7)
-#define MXC_CRMAP_ACR_CKOS_MASK			(0x7 << 4)
-
-/* AP Warm reset */
-#define MXC_CRMAP_AMCR_SW_AP			(1 << 14)
-
-/* Bit definitions of ACGCR in CRM_AP for tree level clock gating */
-#define MXC_CRMAP_ACGCR_ACG0_STOP_WAIT		0x00000001
-#define MXC_CRMAP_ACGCR_ACG0_STOP		0x00000003
-#define MXC_CRMAP_ACGCR_ACG0_RUN		0x00000007
-#define MXC_CRMAP_ACGCR_ACG0_DISABLED		0x00000000
-
-#define MXC_CRMAP_ACGCR_ACG1_STOP_WAIT		0x00000008
-#define MXC_CRMAP_ACGCR_ACG1_STOP		0x00000018
-#define MXC_CRMAP_ACGCR_ACG1_RUN		0x00000038
-#define MXC_CRMAP_ACGCR_ACG1_DISABLED		0x00000000
-
-#define MXC_CRMAP_ACGCR_ACG2_STOP_WAIT		0x00000040
-#define MXC_CRMAP_ACGCR_ACG2_STOP		0x000000C0
-#define MXC_CRMAP_ACGCR_ACG2_RUN		0x000001C0
-#define MXC_CRMAP_ACGCR_ACG2_DISABLED		0x00000000
-
-#define MXC_CRMAP_ACGCR_ACG3_STOP_WAIT		0x00000200
-#define MXC_CRMAP_ACGCR_ACG3_STOP		0x00000600
-#define MXC_CRMAP_ACGCR_ACG3_RUN		0x00000E00
-#define MXC_CRMAP_ACGCR_ACG3_DISABLED		0x00000000
-
-#define MXC_CRMAP_ACGCR_ACG4_STOP_WAIT		0x00001000
-#define MXC_CRMAP_ACGCR_ACG4_STOP		0x00003000
-#define MXC_CRMAP_ACGCR_ACG4_RUN		0x00007000
-#define MXC_CRMAP_ACGCR_ACG4_DISABLED		0x00000000
-
-#define MXC_CRMAP_ACGCR_ACG5_STOP_WAIT		0x00010000
-#define MXC_CRMAP_ACGCR_ACG5_STOP		0x00030000
-#define MXC_CRMAP_ACGCR_ACG5_RUN		0x00070000
-#define MXC_CRMAP_ACGCR_ACG5_DISABLED		0x00000000
-
-#define MXC_CRMAP_ACGCR_ACG6_STOP_WAIT		0x00080000
-#define MXC_CRMAP_ACGCR_ACG6_STOP		0x00180000
-#define MXC_CRMAP_ACGCR_ACG6_RUN		0x00380000
-#define MXC_CRMAP_ACGCR_ACG6_DISABLED		0x00000000
-
-#define NUM_GATE_CTRL				6
-
-/* CRM COM Register Offsets */
-#define MXC_CRMCOM_CSCR				(MXC_CRM_COM_BASE + 0x0C)
-#define MXC_CRMCOM_CCCR				(MXC_CRM_COM_BASE + 0x10)
-
-/* CRM COM Bit Definitions */
-#define MXC_CRMCOM_CSCR_PPD1			0x08000000
-#define MXC_CRMCOM_CSCR_CKOHSEL			(1 << 18)
-#define MXC_CRMCOM_CSCR_CKOSEL			(1 << 17)
-#define MXC_CRMCOM_CCCR_CC_DIV_OFFSET		8
-#define MXC_CRMCOM_CCCR_CC_DIV_MASK		(0x1F << 8)
-#define MXC_CRMCOM_CCCR_CC_SEL_OFFSET		0
-#define MXC_CRMCOM_CCCR_CC_SEL_MASK		0x3
-
-/* DSM Register Offsets */
-#define MXC_DSM_SLEEP_TIME			(MXC_DSM_BASE + 0x0c)
-#define MXC_DSM_CONTROL0			(MXC_DSM_BASE + 0x20)
-#define MXC_DSM_CONTROL1			(MXC_DSM_BASE + 0x24)
-#define MXC_DSM_CTREN				(MXC_DSM_BASE + 0x28)
-#define MXC_DSM_WARM_PER			(MXC_DSM_BASE + 0x40)
-#define MXC_DSM_LOCK_PER			(MXC_DSM_BASE + 0x44)
-#define MXC_DSM_MGPER				(MXC_DSM_BASE + 0x4c)
-#define MXC_DSM_CRM_CONTROL			(MXC_DSM_BASE + 0x50)
-
-/* Bit definitions of various registers in DSM */
-#define MXC_DSM_CRM_CTRL_DVFS_BYP		0x00000008
-#define MXC_DSM_CRM_CTRL_DVFS_VCTRL		0x00000004
-#define MXC_DSM_CRM_CTRL_LPMD1			0x00000002
-#define MXC_DSM_CRM_CTRL_LPMD0			0x00000001
-#define MXC_DSM_CRM_CTRL_LPMD_STOP_MODE		0x00000000
-#define MXC_DSM_CRM_CTRL_LPMD_WAIT_MODE		0x00000001
-#define MXC_DSM_CRM_CTRL_LPMD_RUN_MODE		0x00000003
-#define MXC_DSM_CONTROL0_STBY_COMMIT_EN		0x00000200
-#define MXC_DSM_CONTROL0_MSTR_EN		0x00000001
-#define MXC_DSM_CONTROL0_RESTART		0x00000010
-/* Counter Block reset */
-#define MXC_DSM_CONTROL1_CB_RST			0x00000002
-/* State Machine reset */
-#define MXC_DSM_CONTROL1_SM_RST			0x00000004
-/* Bit needed to reset counter block */
-#define MXC_CONTROL1_RST_CNT32			0x00000008
-#define MXC_DSM_CONTROL1_RST_CNT32_EN		0x00000800
-#define MXC_DSM_CONTROL1_SLEEP			0x00000100
-#define MXC_DSM_CONTROL1_WAKEUP_DISABLE		0x00004000
-#define MXC_DSM_CTREN_CNT32			0x00000001
-
-/* Magic Fix enable bit */
-#define MXC_DSM_MGPER_EN_MGFX			0x80000000
-#define MXC_DSM_MGPER_PER_MASK			0x000003FF
-#define MXC_DSM_MGPER_PER(n)			(MXC_DSM_MGPER_PER_MASK & n)
-
-/* Address offsets of the CLKCTL registers */
-#define MXC_CLKCTL_GP_CTRL	(MXC_CLKCTL_BASE + 0x00)
-#define MXC_CLKCTL_GP_SER	(MXC_CLKCTL_BASE + 0x04)
-#define MXC_CLKCTL_GP_CER	(MXC_CLKCTL_BASE + 0x08)
-
-#endif /* _ARCH_ARM_MACH_MXC91231_CRM_REGS_H_ */

arch/arm/mach-mxc91231/devices.c

@@ -1,251 +0,0 @@
-/*
- * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA  02110-1301, USA.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/serial.h>
-#include <linux/gpio.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <mach/imx-uart.h>
-
-static struct resource uart0[] = {
-	{
-		.start = MXC91231_UART1_BASE_ADDR,
-		.end = MXC91231_UART1_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC91231_INT_UART1_RX,
-		.end = MXC91231_INT_UART1_RX,
-		.flags = IORESOURCE_IRQ,
-	}, {
-		.start = MXC91231_INT_UART1_TX,
-		.end = MXC91231_INT_UART1_TX,
-		.flags = IORESOURCE_IRQ,
-	}, {
-		.start = MXC91231_INT_UART1_MINT,
-		.end = MXC91231_INT_UART1_MINT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device0 = {
-	.name = "imx-uart",
-	.id = 0,
-	.resource = uart0,
-	.num_resources = ARRAY_SIZE(uart0),
-};
-
-static struct resource uart1[] = {
-	{
-		.start = MXC91231_UART2_BASE_ADDR,
-		.end = MXC91231_UART2_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC91231_INT_UART2_RX,
-		.end = MXC91231_INT_UART2_RX,
-		.flags = IORESOURCE_IRQ,
-	}, {
-		.start = MXC91231_INT_UART2_TX,
-		.end = MXC91231_INT_UART2_TX,
-		.flags = IORESOURCE_IRQ,
-	}, {
-		.start = MXC91231_INT_UART2_MINT,
-		.end = MXC91231_INT_UART2_MINT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device1 = {
-	.name = "imx-uart",
-	.id = 1,
-	.resource = uart1,
-	.num_resources = ARRAY_SIZE(uart1),
-};
-
-static struct resource uart2[] = {
-	{
-		.start = MXC91231_UART3_BASE_ADDR,
-		.end = MXC91231_UART3_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC91231_INT_UART3_RX,
-		.end = MXC91231_INT_UART3_RX,
-		.flags = IORESOURCE_IRQ,
-	}, {
-		.start = MXC91231_INT_UART3_TX,
-		.end = MXC91231_INT_UART3_TX,
-		.flags = IORESOURCE_IRQ,
-	}, {
-		.start = MXC91231_INT_UART3_MINT,
-		.end = MXC91231_INT_UART3_MINT,
-		.flags = IORESOURCE_IRQ,
-
-	},
-};
-
-struct platform_device mxc_uart_device2 = {
-	.name = "imx-uart",
-	.id = 2,
-	.resource = uart2,
-	.num_resources = ARRAY_SIZE(uart2),
-};
-
-/* GPIO port description */
-static struct mxc_gpio_port mxc_gpio_ports[] = {
-	[0] = {
-		.chip.label = "gpio-0",
-		.base = MXC91231_IO_ADDRESS(MXC91231_GPIO1_AP_BASE_ADDR),
-		.irq = MXC91231_INT_GPIO1,
-		.virtual_irq_start = MXC_GPIO_IRQ_START,
-	},
-	[1] = {
-		.chip.label = "gpio-1",
-		.base = MXC91231_IO_ADDRESS(MXC91231_GPIO2_AP_BASE_ADDR),
-		.irq = MXC91231_INT_GPIO2,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
-	},
-	[2] = {
-		.chip.label = "gpio-2",
-		.base = MXC91231_IO_ADDRESS(MXC91231_GPIO3_AP_BASE_ADDR),
-		.irq = MXC91231_INT_GPIO3,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
-	},
-	[3] = {
-		.chip.label = "gpio-3",
-		.base = MXC91231_IO_ADDRESS(MXC91231_GPIO4_SH_BASE_ADDR),
-		.irq = MXC91231_INT_GPIO4,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
-	},
-};
-
-int __init mxc91231_register_gpios(void)
-{
-	return mxc_gpio_init(mxc_gpio_ports, ARRAY_SIZE(mxc_gpio_ports));
-}
-
-static struct resource mxc_nand_resources[] = {
-	{
-		.start	= MXC91231_NFC_BASE_ADDR,
-		.end	= MXC91231_NFC_BASE_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM
-	}, {
-		.start	= MXC91231_INT_NANDFC,
-		.end	= MXC91231_INT_NANDFC,
-		.flags	= IORESOURCE_IRQ
-	},
-};
-
-struct platform_device mxc_nand_device = {
-	.name = "mxc_nand",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_nand_resources),
-	.resource = mxc_nand_resources,
-};
-
-static struct resource mxc_sdhc0_resources[] = {
-	{
-		.start = MXC91231_MMC_SDHC1_BASE_ADDR,
-		.end = MXC91231_MMC_SDHC1_BASE_ADDR + SZ_16K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC91231_INT_MMC_SDHC1,
-		.end = MXC91231_INT_MMC_SDHC1,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource mxc_sdhc1_resources[] = {
-	{
-		.start = MXC91231_MMC_SDHC2_BASE_ADDR,
-		.end = MXC91231_MMC_SDHC2_BASE_ADDR + SZ_16K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC91231_INT_MMC_SDHC2,
-		.end = MXC91231_INT_MMC_SDHC2,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_sdhc_device0 = {
-	.name = "mxc-mmc",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_sdhc0_resources),
-	.resource = mxc_sdhc0_resources,
-};
-
-struct platform_device mxc_sdhc_device1 = {
-	.name = "mxc-mmc",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(mxc_sdhc1_resources),
-	.resource = mxc_sdhc1_resources,
-};
-
-static struct resource mxc_cspi0_resources[] = {
-	{
-		.start = MXC91231_CSPI1_BASE_ADDR,
-		.end = MXC91231_CSPI1_BASE_ADDR + 0x20,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC91231_INT_CSPI1,
-		.end = MXC91231_INT_CSPI1,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_cspi_device0 = {
-	.name = "spi_imx",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_cspi0_resources),
-	.resource = mxc_cspi0_resources,
-};
-
-static struct resource mxc_cspi1_resources[] = {
-	{
-		.start = MXC91231_CSPI2_BASE_ADDR,
-		.end = MXC91231_CSPI2_BASE_ADDR + 0x20,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC91231_INT_CSPI2,
-		.end = MXC91231_INT_CSPI2,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_cspi_device1 = {
-	.name = "spi_imx",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(mxc_cspi1_resources),
-	.resource = mxc_cspi1_resources,
-};
-
-static struct resource mxc_wdog0_resources[] = {
-	{
-		.start = MXC91231_WDOG1_BASE_ADDR,
-		.end = MXC91231_WDOG1_BASE_ADDR + 0x10,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device mxc_wdog_device0 = {
-	.name = "mxc-wdt",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_wdog0_resources),
-	.resource = mxc_wdog0_resources,
-};

arch/arm/mach-mxc91231/devices.h

@@ -1,13 +0,0 @@
-extern struct platform_device mxc_uart_device0;
-extern struct platform_device mxc_uart_device1;
-extern struct platform_device mxc_uart_device2;
-
-extern struct platform_device mxc_nand_device;
-
-extern struct platform_device mxc_sdhc_device0;
-extern struct platform_device mxc_sdhc_device1;
-
-extern struct platform_device mxc_cspi_device0;
-extern struct platform_device mxc_cspi_device1;
-
-extern struct platform_device mxc_wdog_device0;

arch/arm/mach-mxc91231/iomux.c

@@ -1,177 +0,0 @@
-/*
- * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- * Copyright (C) 2009 by Valentin Longchamp <valentin.longchamp@epfl.ch>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <mach/hardware.h>
-#include <mach/gpio.h>
-#include <mach/iomux-mxc91231.h>
-
-/*
- * IOMUX register (base) addresses
- */
-#define IOMUX_AP_BASE		MXC91231_IO_ADDRESS(MXC91231_IOMUX_AP_BASE_ADDR)
-#define IOMUX_COM_BASE		MXC91231_IO_ADDRESS(MXC91231_IOMUX_COM_BASE_ADDR)
-#define IOMUXSW_AP_MUX_CTL	(IOMUX_AP_BASE + 0x000)
-#define IOMUXSW_SP_MUX_CTL	(IOMUX_COM_BASE + 0x000)
-#define IOMUXSW_PAD_CTL		(IOMUX_COM_BASE + 0x200)
-
-#define IOMUXINT_OBS1		(IOMUX_AP_BASE + 0x600)
-#define IOMUXINT_OBS2		(IOMUX_AP_BASE + 0x004)
-
-static DEFINE_SPINLOCK(gpio_mux_lock);
-
-#define NB_PORTS			((PIN_MAX + 32) / 32)
-#define PIN_GLOBAL_NUM(pin) \
-	(((pin & MUX_SIDE_MASK) >> MUX_SIDE_SHIFT)*PIN_AP_MAX +	\
-	 ((pin & MUX_REG_MASK) >> MUX_REG_SHIFT)*4 +		\
-	 ((pin & MUX_FIELD_MASK) >> MUX_FIELD_SHIFT))
-
-unsigned long mxc_pin_alloc_map[NB_PORTS * 32 / BITS_PER_LONG];
-/*
- * set the mode for a IOMUX pin.
- */
-int mxc_iomux_mode(unsigned int pin_mode)
-{
-	u32 side, field, l, mode, ret = 0;
-	void __iomem *reg;
-
-	side = (pin_mode & MUX_SIDE_MASK) >> MUX_SIDE_SHIFT;
-	switch (side) {
-	case MUX_SIDE_AP:
-		reg = IOMUXSW_AP_MUX_CTL;
-		break;
-	case MUX_SIDE_SP:
-		reg = IOMUXSW_SP_MUX_CTL;
-		break;
-	default:
-		return -EINVAL;
-	}
-	reg += ((pin_mode & MUX_REG_MASK) >> MUX_REG_SHIFT) * 4;
-	field = (pin_mode & MUX_FIELD_MASK) >> MUX_FIELD_SHIFT;
-	mode = (pin_mode & MUX_MODE_MASK) >> MUX_MODE_SHIFT;
-
-	spin_lock(&gpio_mux_lock);
-
-	l = __raw_readl(reg);
-	l &= ~(0xff << (field * 8));
-	l |= mode << (field * 8);
-	__raw_writel(l, reg);
-
-	spin_unlock(&gpio_mux_lock);
-
-	return ret;
-}
-EXPORT_SYMBOL(mxc_iomux_mode);
-
-/*
- * This function configures the pad value for a IOMUX pin.
- */
-void mxc_iomux_set_pad(enum iomux_pins pin, u32 config)
-{
-	u32 padgrp, field, l;
-	void __iomem *reg;
-
-	padgrp = (pin & MUX_PADGRP_MASK) >> MUX_PADGRP_SHIFT;
-	reg = IOMUXSW_PAD_CTL + (pin + 2) / 3 * 4;
-	field = (pin + 2) % 3;
-
-	pr_debug("%s: reg offset = 0x%x, field = %d\n",
-			__func__, (pin + 2) / 3, field);
-
-	spin_lock(&gpio_mux_lock);
-
-	l = __raw_readl(reg);
-	l &= ~(0x1ff << (field * 10));
-	l |= config << (field * 10);
-	__raw_writel(l, reg);
-
-	spin_unlock(&gpio_mux_lock);
-}
-EXPORT_SYMBOL(mxc_iomux_set_pad);
-
-/*
- * allocs a single pin:
- * 	- reserves the pin so that it is not claimed by another driver
- * 	- setups the iomux according to the configuration
- */
-int mxc_iomux_alloc_pin(unsigned int pin_mode, const char *label)
-{
-	unsigned pad = PIN_GLOBAL_NUM(pin_mode);
-	if (pad >= (PIN_MAX + 1)) {
-		printk(KERN_ERR "mxc_iomux: Attempt to request nonexistant pin %u for \"%s\"\n",
-			pad, label ? label : "?");
-		return -EINVAL;
-	}
-
-	if (test_and_set_bit(pad, mxc_pin_alloc_map)) {
-		printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n",
-			pad, label ? label : "?");
-		return -EBUSY;
-	}
-	mxc_iomux_mode(pin_mode);
-
-	return 0;
-}
-EXPORT_SYMBOL(mxc_iomux_alloc_pin);
-
-int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count,
-		const char *label)
-{
-	const unsigned int *p = pin_list;
-	int i;
-	int ret = -EINVAL;
-
-	for (i = 0; i < count; i++) {
-		ret = mxc_iomux_alloc_pin(*p, label);
-		if (ret)
-			goto setup_error;
-		p++;
-	}
-	return 0;
-
-setup_error:
-	mxc_iomux_release_multiple_pins(pin_list, i);
-	return ret;
-}
-EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins);
-
-void mxc_iomux_release_pin(unsigned int pin_mode)
-{
-	unsigned pad = PIN_GLOBAL_NUM(pin_mode);
-
-	if (pad < (PIN_MAX + 1))
-		clear_bit(pad, mxc_pin_alloc_map);
-}
-EXPORT_SYMBOL(mxc_iomux_release_pin);
-
-void mxc_iomux_release_multiple_pins(const unsigned int *pin_list, int count)
-{
-	const unsigned int *p = pin_list;
-	int i;
-
-	for (i = 0; i < count; i++) {
-		mxc_iomux_release_pin(*p);
-		p++;
-	}
-}
-EXPORT_SYMBOL(mxc_iomux_release_multiple_pins);

arch/arm/mach-mxc91231/magx-zn5.c

@@ -1,62 +0,0 @@
-/*
- * Copyright 2009 Dmitriy Taychenachev <dimichxp@gmail.com>
- *
- * This file is released under the GPLv2 or later.
- */
-
-#include <linux/irq.h>
-#include <linux/init.h>
-#include <linux/device.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/time.h>
-#include <asm/mach/arch.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mxc91231.h>
-#include <mach/mmc.h>
-#include <mach/imx-uart.h>
-
-#include "devices.h"
-
-static struct imxuart_platform_data uart_pdata = {
-};
-
-static struct imxmmc_platform_data sdhc_pdata = {
-};
-
-static void __init zn5_init(void)
-{
-	pm_power_off = mxc91231_power_off;
-
-	mxc_iomux_alloc_pin(MXC91231_PIN_SP_USB_DAT_VP__RXD2, "uart2-rx");
-	mxc_iomux_alloc_pin(MXC91231_PIN_SP_USB_SE0_VM__TXD2, "uart2-tx");
-
-	mxc_register_device(&mxc_uart_device1, &uart_pdata);
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-
-	mxc_register_device(&mxc_sdhc_device0, &sdhc_pdata);
-
-	mxc_register_device(&mxc_wdog_device0, NULL);
-
-	return;
-}
-
-static void __init zn5_timer_init(void)
-{
-	mxc91231_clocks_init(26000000); /* 26mhz ckih */
-}
-
-struct sys_timer zn5_timer = {
-	.init = zn5_timer_init,
-};
-
-MACHINE_START(MAGX_ZN5, "Motorola Zn5")
-	.boot_params = MXC91231_PHYS_OFFSET + 0x100,
-	.map_io = mxc91231_map_io,
-	.init_early = mxc91231_init_early,
-	.init_irq = mxc91231_init_irq,
-	.timer = &zn5_timer,
-	.init_machine = zn5_init,
-MACHINE_END

arch/arm/mach-mxc91231/mm.c

@@ -1,62 +0,0 @@
-/*
- *  Copyright (C) 1999,2000 Arm Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *  Copyright 2004-2005 Freescale Semiconductor, Inc. All Rights Reserved.
- *    - add MXC specific definitions
- *  Copyright 2006 Motorola, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <asm/pgtable.h>
-#include <asm/mach/map.h>
-
-/*
- * This structure defines the MXC memory map.
- */
-static struct map_desc mxc91231_io_desc[] __initdata = {
-	imx_map_entry(MXC91231, L2CC, MT_DEVICE),
-	imx_map_entry(MXC91231, X_MEMC, MT_DEVICE),
-	imx_map_entry(MXC91231, ROMP, MT_DEVICE),
-	imx_map_entry(MXC91231, AVIC, MT_DEVICE),
-	imx_map_entry(MXC91231, AIPS1, MT_DEVICE),
-	imx_map_entry(MXC91231, SPBA0, MT_DEVICE),
-	imx_map_entry(MXC91231, SPBA1, MT_DEVICE),
-	imx_map_entry(MXC91231, AIPS2, MT_DEVICE),
-};
-
-/*
- * This function initializes the memory map. It is called during the
- * system startup to create static physical to virtual memory map for
- * the IO modules.
- */
-void __init mxc91231_map_io(void)
-{
-	iotable_init(mxc91231_io_desc, ARRAY_SIZE(mxc91231_io_desc));
-}
-
-void __init mxc91231_init_early(void)
-{
-	mxc_set_cpu_type(MXC_CPU_MXC91231);
-}
-
-int mxc91231_register_gpios(void);
-
-void __init mxc91231_init_irq(void)
-{
-	mxc91231_register_gpios();
-	mxc_init_irq(MXC91231_IO_ADDRESS(MXC91231_AVIC_BASE_ADDR));
-}

arch/arm/mach-mxc91231/system.c

@@ -1,51 +0,0 @@
-/*
- * Copyright 2009 Dmitriy Taychenachev <dimichxp@gmail.com>
- *
- * This file is released under the GPLv2 or later.
- */
-
-#include <linux/delay.h>
-#include <linux/io.h>
-
-#include <asm/proc-fns.h>
-#include <mach/hardware.h>
-
-#include "crm_regs.h"
-
-#define WDOG_WCR		MXC91231_IO_ADDRESS(MXC91231_WDOG1_BASE_ADDR)
-#define WDOG_WCR_OUT_ENABLE	(1 << 6)
-#define WDOG_WCR_ASSERT		(1 << 5)
-
-void mxc91231_power_off(void)
-{
-	u16 wcr;
-
-	wcr = __raw_readw(WDOG_WCR);
-	wcr |= WDOG_WCR_OUT_ENABLE;
-	wcr &= ~WDOG_WCR_ASSERT;
-	__raw_writew(wcr, WDOG_WCR);
-}
-
-void mxc91231_arch_reset(char mode, const char *cmd)
-{
-	u32 amcr;
-
-	/* Reset the AP using CRM */
-	amcr = __raw_readl(MXC_CRMAP_AMCR);
-	amcr &= ~MXC_CRMAP_AMCR_SW_AP;
-	__raw_writel(amcr, MXC_CRMAP_AMCR);
-
-	mdelay(10);
-	cpu_reset(0);
-}
-
-void mxc91231_prepare_idle(void)
-{
-	u32 crm_ctl;
-
-	/* Go to WAIT mode after WFI */
-	crm_ctl = __raw_readl(MXC_DSM_CRM_CONTROL);
-	crm_ctl &= ~(MXC_DSM_CRM_CTRL_LPMD0 | MXC_DSM_CRM_CTRL_LPMD1);
-	crm_ctl |=  MXC_DSM_CRM_CTRL_LPMD_WAIT_MODE;
-	__raw_writel(crm_ctl, MXC_DSM_CRM_CONTROL);
-}

arch/arm/mach-mxs/Kconfig

@@ -24,7 +24,6 @@ config MACH_MX23EVK
 	select MXS_HAVE_PLATFORM_AUART
 	select MXS_HAVE_PLATFORM_MXS_MMC
 	select MXS_HAVE_PLATFORM_MXSFB
-	default y
 	help
 	  Include support for MX23EVK platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -39,7 +38,6 @@ config MACH_MX28EVK
 	select MXS_HAVE_PLATFORM_MXS_MMC
 	select MXS_HAVE_PLATFORM_MXSFB
 	select MXS_OCOTP
-	default y
 	help
 	  Include support for MX28EVK platform. This includes specific
 	  configurations for the board and its peripherals.

arch/arm/mach-mxs/clock-mx23.c

@@ -446,6 +446,8 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("rtc", NULL, rtc_clk)
 	_REGISTER_CLOCK("mxs-dma-apbh", NULL, hbus_clk)
 	_REGISTER_CLOCK("mxs-dma-apbx", NULL, xbus_clk)
+	_REGISTER_CLOCK("mxs-mmc.0", NULL, ssp_clk)
+	_REGISTER_CLOCK("mxs-mmc.1", NULL, ssp_clk)
 	_REGISTER_CLOCK(NULL, "usb", usb_clk)
 	_REGISTER_CLOCK(NULL, "audio", audio_clk)
 	_REGISTER_CLOCK("mxs-pwm.0", NULL, pwm_clk)

arch/arm/mach-mxs/devices-mx28.h

@@ -34,7 +34,7 @@ extern const struct mxs_flexcan_data mx28_flexcan_data[] __initconst;
 #define mx28_add_flexcan0(pdata)	mx28_add_flexcan(0, pdata)
 #define mx28_add_flexcan1(pdata)	mx28_add_flexcan(1, pdata)
 
-extern const struct mxs_i2c_data mx28_mxs_i2c_data[] __initconst;
+extern const struct mxs_mxs_i2c_data mx28_mxs_i2c_data[] __initconst;
 #define mx28_add_mxs_i2c(id)		mxs_add_mxs_i2c(&mx28_mxs_i2c_data[id])
 
 extern const struct mxs_mxs_mmc_data mx28_mxs_mmc_data[] __initconst;

arch/arm/mach-mxs/devices/platform-mxs-i2c.c

@@ -22,13 +22,14 @@
 	[_id] = mxs_i2c_data_entry_single(soc, _id)
 
 #ifdef CONFIG_SOC_IMX28
-const struct mxs_i2c_data mx28_mxs_i2c_data[] __initconst = {
+const struct mxs_mxs_i2c_data mx28_mxs_i2c_data[] __initconst = {
 	mxs_i2c_data_entry(MX28, 0),
 	mxs_i2c_data_entry(MX28, 1),
 };
 #endif
 
-struct platform_device *__init mxs_add_mxs_i2c(const struct mxs_i2c_data *data)
+struct platform_device *__init mxs_add_mxs_i2c(
+		const struct mxs_mxs_i2c_data *data)
 {
 	struct resource res[] = {
 		{

arch/arm/mach-mxs/include/mach/devices-common.h

@@ -65,13 +65,14 @@ struct platform_device *__init mxs_add_flexcan(
 		const struct flexcan_platform_data *pdata);
 
 /* i2c */
-struct mxs_i2c_data {
+struct mxs_mxs_i2c_data {
 	int id;
 	resource_size_t iobase;
 	resource_size_t errirq;
 	resource_size_t dmairq;
 };
-struct platform_device * __init mxs_add_mxs_i2c(const struct mxs_i2c_data *data);
+struct platform_device * __init mxs_add_mxs_i2c(
+		const struct mxs_mxs_i2c_data *data);
 
 /* mmc */
 #include <mach/mmc.h>

arch/arm/mach-mxs/include/mach/mx23.h

@@ -57,7 +57,7 @@
 #define MX23_AUDIOIN_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x04c000)
 #define MX23_LRADC_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x050000)
 #define MX23_SPDIF_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x054000)
-#define MX23_I2C0_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x058000)
+#define MX23_I2C_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x058000)
 #define MX23_RTC_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x05c000)
 #define MX23_PWM_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x064000)
 #define MX23_TIMROT_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x068000)

arch/arm/mach-mxs/mach-mx23evk.c

@@ -148,7 +148,7 @@ static void __init mx23evk_init(void)
 	mx23_add_auart0();
 
 	/* power on mmc slot by writing 0 to the gpio */
-	ret = gpio_request_one(MX23EVK_MMC0_SLOT_POWER, GPIOF_DIR_OUT,
+	ret = gpio_request_one(MX23EVK_MMC0_SLOT_POWER, GPIOF_OUT_INIT_LOW,
 			       "mmc0-slot-power");
 	if (ret)
 		pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret);