ipmi: style fixes in the base code

Lots of style fixes for the base IPMI driver.  No functional changes.
Basically fixes everything reported by checkpatch and fixes the comment
style.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

include/linux/ipmi.h

@@ -75,8 +75,7 @@
  * work for sockets.
  */
 #define IPMI_MAX_ADDR_SIZE 32
-struct ipmi_addr
-{
+struct ipmi_addr {
 	 /* Try to take these from the "Channel Medium Type" table
 	    in section 6.5 of the IPMI 1.5 manual. */
 	int   addr_type;
@@ -90,8 +89,7 @@ struct ipmi_addr
  * 0), or IPMC_BMC_CHANNEL if communicating directly with the BMC.
  */
 #define IPMI_SYSTEM_INTERFACE_ADDR_TYPE	0x0c
-struct ipmi_system_interface_addr
-{
+struct ipmi_system_interface_addr {
 	int           addr_type;
 	short         channel;
 	unsigned char lun;
@@ -100,10 +98,9 @@ struct ipmi_system_interface_addr
 /* An IPMB Address. */
 #define IPMI_IPMB_ADDR_TYPE		0x01
 /* Used for broadcast get device id as described in section 17.9 of the
-   IPMI 1.5 manual. */ 
+   IPMI 1.5 manual. */
 #define IPMI_IPMB_BROADCAST_ADDR_TYPE	0x41
-struct ipmi_ipmb_addr
-{
+struct ipmi_ipmb_addr {
 	int           addr_type;
 	short         channel;
 	unsigned char slave_addr;
@@ -128,8 +125,7 @@ struct ipmi_ipmb_addr
  * message is a little weird, but this is required.
  */
 #define IPMI_LAN_ADDR_TYPE		0x04
-struct ipmi_lan_addr
-{
+struct ipmi_lan_addr {
 	int           addr_type;
 	short         channel;
 	unsigned char privilege;
@@ -162,16 +158,14 @@ struct ipmi_lan_addr
  * byte of data in the response (as the spec shows the messages laid
  * out).
  */
-struct ipmi_msg
-{
+struct ipmi_msg {
 	unsigned char  netfn;
 	unsigned char  cmd;
 	unsigned short data_len;
 	unsigned char  __user *data;
 };
 
-struct kernel_ipmi_msg
-{
+struct kernel_ipmi_msg {
 	unsigned char  netfn;
 	unsigned char  cmd;
 	unsigned short data_len;
@@ -239,12 +233,11 @@ typedef struct ipmi_user *ipmi_user_t;
  * used after the message is delivered, so the upper layer may use the
  * link to build a linked list, if it likes.
  */
-struct ipmi_recv_msg
-{
+struct ipmi_recv_msg {
 	struct list_head link;
 
 	/* The type of message as defined in the "Receive Types"
-           defines above. */
+	   defines above. */
 	int              recv_type;
 
 	ipmi_user_t      user;
@@ -271,9 +264,8 @@ struct ipmi_recv_msg
 /* Allocate and free the receive message. */
 void ipmi_free_recv_msg(struct ipmi_recv_msg *msg);
 
-struct ipmi_user_hndl
-{
-        /* Routine type to call when a message needs to be routed to
+struct ipmi_user_hndl {
+	/* Routine type to call when a message needs to be routed to
 	   the upper layer.  This will be called with some locks held,
 	   the only IPMI routines that can be called are ipmi_request
 	   and the alloc/free operations.  The handler_data is the
@@ -433,8 +425,7 @@ int ipmi_set_gets_events(ipmi_user_t user, int val);
  * every existing interface when a new watcher is registered with
  * ipmi_smi_watcher_register().
  */
-struct ipmi_smi_watcher
-{
+struct ipmi_smi_watcher {
 	struct list_head link;
 
 	/* You must set the owner to the current module, if you are in
@@ -505,8 +496,7 @@ int ipmi_validate_addr(struct ipmi_addr *addr, int len);
 
 
 /* Messages sent to the interface are this format. */
-struct ipmi_req
-{
+struct ipmi_req {
 	unsigned char __user *addr; /* Address to send the message to. */
 	unsigned int  addr_len;
 
@@ -531,12 +521,11 @@ struct ipmi_req
 
 /* Messages sent to the interface with timing parameters are this
    format. */
-struct ipmi_req_settime
-{
+struct ipmi_req_settime {
 	struct ipmi_req req;
 
 	/* See ipmi_request_settime() above for details on these
-           values. */
+	   values. */
 	int          retries;
 	unsigned int retry_time_ms;
 };
@@ -553,8 +542,7 @@ struct ipmi_req_settime
 					     struct ipmi_req_settime)
 
 /* Messages received from the interface are this format. */
-struct ipmi_recv
-{
+struct ipmi_recv {
 	int     recv_type; /* Is this a command, response or an
 			      asyncronous event. */
 
@@ -600,13 +588,12 @@ struct ipmi_recv
 					      struct ipmi_recv)
 
 /* Register to get commands from other entities on this interface. */
-struct ipmi_cmdspec
-{
+struct ipmi_cmdspec {
 	unsigned char netfn;
 	unsigned char cmd;
 };
 
-/* 
+/*
  * Register to receive a specific command.  error values:
  *   - EFAULT - an address supplied was invalid.
  *   - EBUSY - The netfn/cmd supplied was already in use.
@@ -629,8 +616,7 @@ struct ipmi_cmdspec
  * else.  The chans field is a bitmask, (1 << channel) for each channel.
  * It may be IPMI_CHAN_ALL for all channels.
  */
-struct ipmi_cmdspec_chans
-{
+struct ipmi_cmdspec_chans {
 	unsigned int netfn;
 	unsigned int cmd;
 	unsigned int chans;
@@ -652,7 +638,7 @@ struct ipmi_cmdspec_chans
 #define IPMICTL_UNREGISTER_FOR_CMD_CHANS _IOR(IPMI_IOC_MAGIC, 29,	\
 					     struct ipmi_cmdspec_chans)
 
-/* 
+/*
  * Set whether this interface receives events.  Note that the first
  * user registered for events will get all pending events for the
  * interface.  error values:
@@ -668,15 +654,18 @@ struct ipmi_cmdspec_chans
  * things it takes to determine your address (if not the BMC) and set
  * it for everyone else.  You should probably leave the LUN alone.
  */
-struct ipmi_channel_lun_address_set
-{
+struct ipmi_channel_lun_address_set {
 	unsigned short channel;
 	unsigned char  value;
 };
-#define IPMICTL_SET_MY_CHANNEL_ADDRESS_CMD _IOR(IPMI_IOC_MAGIC, 24, struct ipmi_channel_lun_address_set)
-#define IPMICTL_GET_MY_CHANNEL_ADDRESS_CMD _IOR(IPMI_IOC_MAGIC, 25, struct ipmi_channel_lun_address_set)
-#define IPMICTL_SET_MY_CHANNEL_LUN_CMD	   _IOR(IPMI_IOC_MAGIC, 26, struct ipmi_channel_lun_address_set)
-#define IPMICTL_GET_MY_CHANNEL_LUN_CMD	   _IOR(IPMI_IOC_MAGIC, 27, struct ipmi_channel_lun_address_set)
+#define IPMICTL_SET_MY_CHANNEL_ADDRESS_CMD \
+	_IOR(IPMI_IOC_MAGIC, 24, struct ipmi_channel_lun_address_set)
+#define IPMICTL_GET_MY_CHANNEL_ADDRESS_CMD \
+	_IOR(IPMI_IOC_MAGIC, 25, struct ipmi_channel_lun_address_set)
+#define IPMICTL_SET_MY_CHANNEL_LUN_CMD \
+	_IOR(IPMI_IOC_MAGIC, 26, struct ipmi_channel_lun_address_set)
+#define IPMICTL_GET_MY_CHANNEL_LUN_CMD \
+	_IOR(IPMI_IOC_MAGIC, 27, struct ipmi_channel_lun_address_set)
 /* Legacy interfaces, these only set IPMB 0. */
 #define IPMICTL_SET_MY_ADDRESS_CMD	_IOR(IPMI_IOC_MAGIC, 17, unsigned int)
 #define IPMICTL_GET_MY_ADDRESS_CMD	_IOR(IPMI_IOC_MAGIC, 18, unsigned int)
@@ -687,8 +676,7 @@ struct ipmi_channel_lun_address_set
  * Get/set the default timing values for an interface.  You shouldn't
  * generally mess with these.
  */
-struct ipmi_timing_parms
-{
+struct ipmi_timing_parms {
 	int          retries;
 	unsigned int retry_time_ms;
 };

include/linux/ipmi_smi.h

@@ -60,8 +60,7 @@ typedef struct ipmi_smi *ipmi_smi_t;
  * asynchronous data and messages and request them from the
  * interface.
  */
-struct ipmi_smi_msg
-{
+struct ipmi_smi_msg {
 	struct list_head link;
 
 	long    msgid;
@@ -74,12 +73,11 @@ struct ipmi_smi_msg
 	unsigned char rsp[IPMI_MAX_MSG_LENGTH];
 
 	/* Will be called when the system is done with the message
-           (presumably to free it). */
+	   (presumably to free it). */
 	void (*done)(struct ipmi_smi_msg *msg);
 };
 
-struct ipmi_smi_handlers
-{
+struct ipmi_smi_handlers {
 	struct module *owner;
 
 	/* The low-level interface cannot start sending messages to