[SPARC]: Kill __irq_itoa().

This ugly hack was long overdue to die.

It was a way to print out Sparc interrupts in a more freindly format,
since IRQ numbers were arbitrary opaque 32-bit integers which vectored
into PIL levels.  These 32-bit integers were not necessarily in the
0-->NR_IRQS range, but the PILs they vectored to were.

The idea now is that we will increase NR_IRQS a little bit and use a
virtual<-->real IRQ number mapping scheme similar to PowerPC.

That makes this IRQ printing hack irrelevant, and furthermore only a
handful of drivers actually used __irq_itoa() making it even less
useful.

Signed-off-by: David S. Miller <davem@davemloft.net>

arch/sparc/kernel/pcic.c

@@ -896,13 +896,6 @@ static inline unsigned long get_irqmask(int irq_nr)
 	return 1 << irq_nr;
 }
 
-static inline char *pcic_irq_itoa(unsigned int irq)
-{
-	static char buff[16];
-	sprintf(buff, "%d", irq);
-	return buff;
-}
-
 static void pcic_disable_irq(unsigned int irq_nr)
 {
 	unsigned long mask, flags;
@@ -955,7 +948,6 @@ void __init sun4m_pci_init_IRQ(void)
 	BTFIXUPSET_CALL(clear_clock_irq, pcic_clear_clock_irq, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(clear_profile_irq, pcic_clear_profile_irq, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(load_profile_irq, pcic_load_profile_irq, BTFIXUPCALL_NORM);
-	BTFIXUPSET_CALL(__irq_itoa, pcic_irq_itoa, BTFIXUPCALL_NORM);
 }
 
 int pcibios_assign_resource(struct pci_dev *pdev, int resource)

arch/sparc/kernel/sparc_ksyms.c

@@ -163,7 +163,6 @@ EXPORT_SYMBOL(BTFIXUP_CALL(__hard_smp_processor_id));
 #endif
 EXPORT_SYMBOL(BTFIXUP_CALL(enable_irq));
 EXPORT_SYMBOL(BTFIXUP_CALL(disable_irq));
-EXPORT_SYMBOL(BTFIXUP_CALL(__irq_itoa));
 EXPORT_SYMBOL(BTFIXUP_CALL(mmu_unlockarea));
 EXPORT_SYMBOL(BTFIXUP_CALL(mmu_lockarea));
 EXPORT_SYMBOL(BTFIXUP_CALL(mmu_get_scsi_sgl));

arch/sparc/kernel/sun4c_irq.c

@@ -198,8 +198,6 @@ static void __init sun4c_init_timers(irqreturn_t (*counter_fn)(int, void *, stru
 static void sun4c_nop(void) {}
 #endif
 
-extern char *sun4m_irq_itoa(unsigned int irq);
-
 void __init sun4c_init_IRQ(void)
 {
 	struct linux_prom_registers int_regs[2];
@@ -238,7 +236,6 @@ void __init sun4c_init_IRQ(void)
 	BTFIXUPSET_CALL(clear_clock_irq, sun4c_clear_clock_irq, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(clear_profile_irq, sun4c_clear_profile_irq, BTFIXUPCALL_NOP);
 	BTFIXUPSET_CALL(load_profile_irq, sun4c_load_profile_irq, BTFIXUPCALL_NOP);
-	BTFIXUPSET_CALL(__irq_itoa, sun4m_irq_itoa, BTFIXUPCALL_NORM);
 	sparc_init_timers = sun4c_init_timers;
 #ifdef CONFIG_SMP
 	BTFIXUPSET_CALL(set_cpu_int, sun4c_nop, BTFIXUPCALL_NOP);

arch/sparc/kernel/sun4d_irq.c

@@ -560,17 +560,6 @@ void __init sun4d_init_sbi_irq(void)
 	}
 }
 
-static char *sun4d_irq_itoa(unsigned int irq)
-{
-	static char buff[16];
-	
-	if (irq < (1 << 5))
-		sprintf(buff, "%d", irq);
-	else
-		sprintf(buff, "%d,%x", sbus_to_pil[(irq >> 2) & 7], irq);
-	return buff;
-}
-
 void __init sun4d_init_IRQ(void)
 {
 	local_irq_disable();
@@ -581,7 +570,6 @@ void __init sun4d_init_IRQ(void)
 	BTFIXUPSET_CALL(clear_clock_irq, sun4d_clear_clock_irq, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(clear_profile_irq, sun4d_clear_profile_irq, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(load_profile_irq, sun4d_load_profile_irq, BTFIXUPCALL_NORM);
-	BTFIXUPSET_CALL(__irq_itoa, sun4d_irq_itoa, BTFIXUPCALL_NORM);
 	sparc_init_timers = sun4d_init_timers;
 #ifdef CONFIG_SMP
 	BTFIXUPSET_CALL(set_cpu_int, sun4d_set_cpu_int, BTFIXUPCALL_NORM);

arch/sparc/kernel/sun4m_irq.c

@@ -229,13 +229,6 @@ static void sun4m_load_profile_irq(int cpu, unsigned int limit)
 	sun4m_timers->cpu_timers[cpu].l14_timer_limit = limit;
 }
 
-char *sun4m_irq_itoa(unsigned int irq)
-{
-	static char buff[16];
-	sprintf(buff, "%d", irq);
-	return buff;
-}
-
 static void __init sun4m_init_timers(irqreturn_t (*counter_fn)(int, void *, struct pt_regs *))
 {
 	int reg_count, irq, cpu;
@@ -388,7 +381,6 @@ void __init sun4m_init_IRQ(void)
 	BTFIXUPSET_CALL(clear_clock_irq, sun4m_clear_clock_irq, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(clear_profile_irq, sun4m_clear_profile_irq, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(load_profile_irq, sun4m_load_profile_irq, BTFIXUPCALL_NORM);
-	BTFIXUPSET_CALL(__irq_itoa, sun4m_irq_itoa, BTFIXUPCALL_NORM);
 	sparc_init_timers = sun4m_init_timers;
 #ifdef CONFIG_SMP
 	BTFIXUPSET_CALL(set_cpu_int, sun4m_send_ipi, BTFIXUPCALL_NORM);

drivers/atm/fore200e.c

@@ -167,13 +167,9 @@ fore200e_atm2fore_aal(int aal)
 static char*
 fore200e_irq_itoa(int irq)
 {
-#if defined(__sparc_v9__)
-    return __irq_itoa(irq);
-#else
     static char str[8];
     sprintf(str, "%d", irq);
     return str;
-#endif
 }
 
 

drivers/char/rtc.c

@@ -960,10 +960,6 @@ found:
 	 * PCI Slot 2 INTA# (and some INTx# in Slot 1).
 	 */
 	if (request_irq(rtc_irq, rtc_interrupt, SA_SHIRQ, "rtc", (void *)&rtc_port)) {
-		/*
-		 * Standard way for sparc to print irq's is to use
-		 * __irq_itoa(). I think for EBus it's ok to use %d.
-		 */
 		printk(KERN_ERR "rtc: cannot register IRQ %d\n", rtc_irq);
 		return -EIO;
 	}

drivers/fc4/soc.c

@@ -643,7 +643,7 @@ static inline void soc_init(struct sbus_dev *sdev, int no)
 		return;
 	}
 
-	SOD(("SOC uses IRQ%s\n", __irq_itoa(irq)))
+	SOD(("SOC uses IRQ %d\n", irq))
 	
 	s->port[0].fc.irq = irq;
 	s->port[1].fc.irq = irq;

drivers/fc4/socal.c

@@ -767,7 +767,7 @@ static inline void socal_init(struct sbus_dev *sdev, int no)
 		return;
 	}
 
-	SOD(("SOCAL uses IRQ %s\n", __irq_itoa(irq)))
+	SOD(("SOCAL uses IRQ %d\n", irq))
 	
 	s->port[0].fc.irq = irq;
 	s->port[1].fc.irq = irq;

drivers/ide/ide-probe.c

@@ -1138,16 +1138,11 @@ static int init_irq (ide_hwif_t *hwif)
 		spin_unlock_irq(&ide_lock);
 	}
 
-#if !defined(__mc68000__) && !defined(CONFIG_APUS) && !defined(__sparc__)
+#if !defined(__mc68000__) && !defined(CONFIG_APUS)
 	printk("%s at 0x%03lx-0x%03lx,0x%03lx on irq %d", hwif->name,
 		hwif->io_ports[IDE_DATA_OFFSET],
 		hwif->io_ports[IDE_DATA_OFFSET]+7,
 		hwif->io_ports[IDE_CONTROL_OFFSET], hwif->irq);
-#elif defined(__sparc__)
-	printk("%s at 0x%03lx-0x%03lx,0x%03lx on irq %s", hwif->name,
-		hwif->io_ports[IDE_DATA_OFFSET],
-		hwif->io_ports[IDE_DATA_OFFSET]+7,
-		hwif->io_ports[IDE_CONTROL_OFFSET], __irq_itoa(hwif->irq));
 #else
 	printk("%s at 0x%08lx on irq %d", hwif->name,
 		hwif->io_ports[IDE_DATA_OFFSET], hwif->irq);

drivers/ide/setup-pci.c

@@ -694,13 +694,8 @@ static int do_ide_setup_pci_device(struct pci_dev *dev, ide_pci_device_t *d,
 				goto out;
 		}
 		if (noisy)
-#ifdef __sparc__
-			printk(KERN_INFO "%s: 100%% native mode on irq %s\n",
-			       d->name, __irq_itoa(pciirq));
-#else
 			printk(KERN_INFO "%s: 100%% native mode on irq %d\n",
 				d->name, pciirq);
-#endif
 	}
 
 	/* FIXME: silent failure can happen */

drivers/ieee1394/ohci1394.c

@@ -586,11 +586,7 @@ static void ohci_initialize(struct ti_ohci *ohci)
 	reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_linkEnable);
 
 	buf = reg_read(ohci, OHCI1394_Version);
-#ifndef __sparc__
 	sprintf (irq_buf, "%d", ohci->dev->irq);
-#else
-	sprintf (irq_buf, "%s", __irq_itoa(ohci->dev->irq));
-#endif
 	PRINT(KERN_INFO, "OHCI-1394 %d.%d (PCI): IRQ=[%s]  "
 	      "MMIO=[%lx-%lx]  Max Packet=[%d]  IR/IT contexts=[%d/%d]",
 	      ((((buf) >> 16) & 0xf) + (((buf) >> 20) & 0xf) * 10),

drivers/ieee1394/pcilynx.c

@@ -1252,11 +1252,7 @@ static int __devinit add_card(struct pci_dev *dev,
         /* Fix buggy cards with autoboot pin not tied low: */
         reg_write(lynx, DMA0_CHAN_CTRL, 0);
 
-#ifndef __sparc__
 	sprintf (irq_buf, "%d", dev->irq);
-#else
-	sprintf (irq_buf, "%s", __irq_itoa(dev->irq));
-#endif
 
         if (!request_irq(dev->irq, lynx_irq_handler, SA_SHIRQ,
                          PCILYNX_DRIVER_NAME, lynx)) {

drivers/message/fusion/mptbase.c

@@ -63,9 +63,6 @@
 #ifdef CONFIG_MTRR
 #include <asm/mtrr.h>
 #endif
-#ifdef __sparc__
-#include <asm/irq.h>			/* needed for __irq_itoa() proto */
-#endif
 
 #include "mptbase.h"
 
@@ -1394,13 +1391,8 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
 		r = request_irq(pdev->irq, mpt_interrupt, SA_SHIRQ, ioc->name, ioc);
 
 		if (r < 0) {
-#ifndef __sparc__
 			printk(MYIOC_s_ERR_FMT "Unable to allocate interrupt %d!\n",
 					ioc->name, pdev->irq);
-#else
-			printk(MYIOC_s_ERR_FMT "Unable to allocate interrupt %s!\n",
-					ioc->name, __irq_itoa(pdev->irq));
-#endif
 			list_del(&ioc->list);
 			iounmap(mem);
 			kfree(ioc);
@@ -1412,11 +1404,7 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
 		pci_set_master(pdev);			/* ?? */
 		pci_set_drvdata(pdev, ioc);
 
-#ifndef __sparc__
 		dprintk((KERN_INFO MYNAM ": %s installed at interrupt %d\n", ioc->name, pdev->irq));
-#else
-		dprintk((KERN_INFO MYNAM ": %s installed at interrupt %s\n", ioc->name, __irq_itoa(pdev->irq)));
-#endif
 	}
 
 	/* Check for "bound ports" (929, 929X, 1030, 1035) to reduce redundant resets.
@@ -5647,11 +5635,7 @@ mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buffer, int *size, int len, int sh
 			a[5], a[4], a[3], a[2], a[1], a[0]);
 	}
 
-#ifndef __sparc__
 	y += sprintf(buffer+len+y, ", IRQ=%d", ioc->pci_irq);
-#else
-	y += sprintf(buffer+len+y, ", IRQ=%s", __irq_itoa(ioc->pci_irq));
-#endif
 
 	if (!ioc->active)
 		y += sprintf(buffer+len+y, " (disabled)");

drivers/net/3c59x.c

@@ -1382,17 +1382,12 @@ static int __devinit vortex_probe1(struct device *gendev,
 	for (i = 0; i < 6; i++)
 		iowrite8(dev->dev_addr[i], ioaddr + i);
 
-#ifdef __sparc__
-	if (print_info)
-		printk(", IRQ %s\n", __irq_itoa(dev->irq));
-#else
 	if (print_info)
 		printk(", IRQ %d\n", dev->irq);
 	/* Tell them about an invalid IRQ. */
 	if (dev->irq <= 0 || dev->irq >= NR_IRQS)
 		printk(KERN_WARNING " *** Warning: IRQ %d is unlikely to work! ***\n",
 			   dev->irq);
-#endif
 
 	EL3WINDOW(4);
 	step = (ioread8(ioaddr + Wn4_NetDiag) & 0x1e) >> 1;

drivers/net/acenic.c

@@ -579,11 +579,7 @@ static int __devinit acenic_probe_one(struct pci_dev *pdev,
 	}
 
 	printk("Gigabit Ethernet at 0x%08lx, ", dev->base_addr);
-#ifdef __sparc__
-	printk("irq %s\n", __irq_itoa(pdev->irq));
-#else
-	printk("irq %i\n", pdev->irq);
-#endif
+	printk("irq %d\n", pdev->irq);
 
 #ifdef CONFIG_ACENIC_OMIT_TIGON_I
 	if ((readl(&ap->regs->HostCtrl) >> 28) == 4) {

drivers/net/sunhme.c

@@ -2221,13 +2221,8 @@ static int happy_meal_open(struct net_device *dev)
 		if (request_irq(dev->irq, &happy_meal_interrupt,
 				SA_SHIRQ, dev->name, (void *)dev)) {
 			HMD(("EAGAIN\n"));
-#ifdef __sparc__
-			printk(KERN_ERR "happy_meal(SBUS): Can't order irq %s to go.\n",
-			       __irq_itoa(dev->irq));
-#else
 			printk(KERN_ERR "happy_meal(SBUS): Can't order irq %d to go.\n",
 			       dev->irq);
-#endif
 
 			return -EAGAIN;
 		}

drivers/net/sunlance.c

@@ -936,7 +936,7 @@ static int lance_open(struct net_device *dev)
 
 	if (request_irq(dev->irq, &lance_interrupt, SA_SHIRQ,
 			lancestr, (void *) dev)) {
-		printk(KERN_ERR "Lance: Can't get irq %s\n", __irq_itoa(dev->irq));
+		printk(KERN_ERR "Lance: Can't get irq %d\n", dev->irq);
 		return -EAGAIN;
 	}
 

drivers/sbus/char/cpwatchdog.c

@@ -304,8 +304,8 @@ static int wd_open(struct inode *inode, struct file *f)
 						SA_SHIRQ,
 						WD_OBPNAME,
 						(void *)wd_dev.regs)) {
-			printk("%s: Cannot register IRQ %s\n", 
-				WD_OBPNAME, __irq_itoa(wd_dev.irq));
+			printk("%s: Cannot register IRQ %d\n", 
+				WD_OBPNAME, wd_dev.irq);
 			return(-EBUSY);
 		}
 		wd_dev.initialized = 1;

drivers/sbus/char/uctrl.c

@@ -400,7 +400,7 @@ static int __init ts102_uctrl_init(void)
 	}
 
 	driver->regs->uctrl_intr = UCTRL_INTR_RXNE_REQ|UCTRL_INTR_RXNE_MSK;
-	printk("uctrl: 0x%x (irq %s)\n", driver->regs, __irq_itoa(driver->irq));
+	printk("uctrl: 0x%x (irq %d)\n", driver->regs, driver->irq);
 	uctrl_get_event_status();
 	uctrl_get_external_status();
         return 0;

drivers/scsi/esp.c

@@ -821,8 +821,8 @@ static int __init esp_register_irq(struct esp *esp)
 		return -1;
 	}
 
-	printk("esp%d: IRQ %s ", esp->esp_id,
-	       __irq_itoa(esp->ehost->irq));
+	printk("esp%d: IRQ %d ", esp->esp_id,
+	       esp->ehost->irq);
 
 	return 0;
 }

drivers/scsi/qlogicpti.c

@@ -725,7 +725,7 @@ static int __init qpti_register_irq(struct qlogicpti *qpti)
 			SA_SHIRQ, "Qlogic/PTI", qpti))
 		goto fail;
 
-	printk("qpti%d: IRQ %s ", qpti->qpti_id, __irq_itoa(qpti->irq));
+	printk("qpti%d: IRQ %d ", qpti->qpti_id, qpti->irq);
 
 	return 0;
 
@@ -988,8 +988,8 @@ const char *qlogicpti_info(struct Scsi_Host *host)
 	static char buf[80];
 	struct qlogicpti *qpti = (struct qlogicpti *) host->hostdata;
 
-	sprintf(buf, "PTI Qlogic,ISP SBUS SCSI irq %s regs at %p",
-		__irq_itoa(qpti->qhost->irq), qpti->qregs);
+	sprintf(buf, "PTI Qlogic,ISP SBUS SCSI irq %d regs at %p",
+		qpti->qhost->irq, qpti->qregs);
 	return buf;
 }
 

drivers/scsi/sym53c8xx_2/sym_glue.c

@@ -54,14 +54,8 @@
 #define NAME53C		"sym53c"
 #define NAME53C8XX	"sym53c8xx"
 
-/* SPARC just has to be different ... */
-#ifdef __sparc__
-#define IRQ_FMT "%s"
-#define IRQ_PRM(x) __irq_itoa(x)
-#else
 #define IRQ_FMT "%d"
 #define IRQ_PRM(x) (x)
-#endif
 
 struct sym_driver_setup sym_driver_setup = SYM_LINUX_DRIVER_SETUP;
 unsigned int sym_debug_flags = 0;

drivers/serial/sunsu.c

@@ -1295,9 +1295,9 @@ static int __init sunsu_kbd_ms_init(struct uart_sunsu_port *up, int channel)
 	if (up->port.type == PORT_UNKNOWN)
 		return -1;
 
-	printk(KERN_INFO "su%d at 0x%p (irq = %s) is a %s\n",
+	printk(KERN_INFO "su%d at 0x%p (irq = %d) is a %s\n",
 	       channel,
-	       up->port.membase, __irq_itoa(up->port.irq),
+	       up->port.membase, up->port.irq,
 	       sunsu_type(&up->port));
 
 #ifdef CONFIG_SERIO

drivers/serial/sunzilog.c

@@ -1540,8 +1540,8 @@ static void __init sunzilog_init_kbdms(struct uart_sunzilog_port *up, int channe
 		up->cflag = B4800 | CS8 | CLOCAL | CREAD;
 		baud = 4800;
 	}
-	printk(KERN_INFO "zs%d at 0x%p (irq = %s) is a SunZilog\n",
-	       channel, up->port.membase, __irq_itoa(zilog_irq));
+	printk(KERN_INFO "zs%d at 0x%p (irq = %d) is a SunZilog\n",
+	       channel, up->port.membase, zilog_irq);
 
 	up->curregs[R15] = BRKIE;
 	brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);

drivers/usb/core/hcd.c

@@ -1826,24 +1826,16 @@ int usb_add_hcd(struct usb_hcd *hcd,
 
 	/* enable irqs just before we start the controller */
 	if (hcd->driver->irq) {
-		char	buf[8], *bufp = buf;
-
-#ifdef __sparc__
-		bufp = __irq_itoa(irqnum);
-#else
-		sprintf(buf, "%d", irqnum);
-#endif
-
 		snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d",
 				hcd->driver->description, hcd->self.busnum);
 		if ((retval = request_irq(irqnum, &usb_hcd_irq, irqflags,
 				hcd->irq_descr, hcd)) != 0) {
 			dev_err(hcd->self.controller,
-					"request interrupt %s failed\n", bufp);
+					"request interrupt %d failed\n", irqnum);
 			goto err_request_irq;
 		}
 		hcd->irq = irqnum;
-		dev_info(hcd->self.controller, "irq %s, %s 0x%08llx\n", bufp,
+		dev_info(hcd->self.controller, "irq %d, %s 0x%08llx\n", irqnum,
 				(hcd->driver->flags & HCD_MEMORY) ?
 					"io mem" : "io base",
 					(unsigned long long)hcd->rsrc_start);

drivers/usb/gadget/goku_udc.c

@@ -1850,7 +1850,6 @@ static int goku_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	unsigned long		resource, len;
 	void __iomem		*base = NULL;
 	int			retval;
-	char			buf [8], *bufp;
 
 	/* if you want to support more than one controller in a system,
 	 * usb_gadget_driver_{register,unregister}() must change.
@@ -1913,20 +1912,14 @@ static int goku_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	pci_set_drvdata(pdev, dev);
 	INFO(dev, "%s\n", driver_desc);
 	INFO(dev, "version: " DRIVER_VERSION " %s\n", dmastr());
-#ifndef __sparc__
-	scnprintf(buf, sizeof buf, "%d", pdev->irq);
-	bufp = buf;
-#else
-	bufp = __irq_itoa(pdev->irq);
-#endif
-	INFO(dev, "irq %s, pci mem %p\n", bufp, base);
+	INFO(dev, "irq %d, pci mem %p\n", pdev->irq, base);
 
 	/* init to known state, then setup irqs */
 	udc_reset(dev);
 	udc_reinit (dev);
 	if (request_irq(pdev->irq, goku_irq, SA_SHIRQ/*|SA_SAMPLE_RANDOM*/,
 			driver_name, dev) != 0) {
-		DBG(dev, "request interrupt %s failed\n", bufp);
+		DBG(dev, "request interrupt %d failed\n", pdev->irq);
 		retval = -EBUSY;
 		goto done;
 	}

drivers/usb/gadget/net2280.c

@@ -2822,7 +2822,6 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id)
 	unsigned long		resource, len;
 	void			__iomem *base = NULL;
 	int			retval, i;
-	char			buf [8], *bufp;
 
 	/* if you want to support more than one controller in a system,
 	 * usb_gadget_driver_{register,unregister}() must change.
@@ -2896,15 +2895,10 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id)
 		retval = -ENODEV;
 		goto done;
 	}
-#ifndef __sparc__
-	scnprintf (buf, sizeof buf, "%d", pdev->irq);
-	bufp = buf;
-#else
-	bufp = __irq_itoa(pdev->irq);
-#endif
+
 	if (request_irq (pdev->irq, net2280_irq, SA_SHIRQ, driver_name, dev)
 			!= 0) {
-		ERROR (dev, "request interrupt %s failed\n", bufp);
+		ERROR (dev, "request interrupt %d failed\n", pdev->irq);
 		retval = -EBUSY;
 		goto done;
 	}
@@ -2953,8 +2947,8 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id)
 
 	/* done */
 	INFO (dev, "%s\n", driver_desc);
-	INFO (dev, "irq %s, pci mem %p, chip rev %04x\n",
-			bufp, base, dev->chiprev);
+	INFO (dev, "irq %d, pci mem %p, chip rev %04x\n",
+			pdev->irq, base, dev->chiprev);
 	INFO (dev, "version: " DRIVER_VERSION "; dma %s\n",
 			use_dma
 				? (use_dma_chaining ? "chaining" : "enabled")

include/asm-sparc/irq.h

@@ -17,8 +17,6 @@
 
 #define __irq_ino(irq) irq
 #define __irq_pil(irq) irq
-BTFIXUPDEF_CALL(char *, __irq_itoa, unsigned int)
-#define __irq_itoa(irq) BTFIXUP_CALL(__irq_itoa)(irq)
 
 #define NR_IRQS    16
 

include/asm-sparc64/irq.h

@@ -99,14 +99,6 @@ extern struct ino_bucket ivector_table[NUM_IVECS];
 #define __bucket(irq) ((struct ino_bucket *)(unsigned long)(irq))
 #define __irq(bucket) ((unsigned int)(unsigned long)(bucket))
 
-static __inline__ char *__irq_itoa(unsigned int irq)
-{
-	static char buff[16];
-
-	sprintf(buff, "%d,%x", __irq_pil(irq), (unsigned int)__irq_ino(irq));
-	return buff;
-}
-
 #define NR_IRQS    16
 
 #define irq_canonicalize(irq)	(irq)

sound/sparc/amd7930.c

@@ -977,9 +977,9 @@ static int __init snd_amd7930_create(struct snd_card *card,
 
 	if (request_irq(irq_prop->pri, snd_amd7930_interrupt,
 			SA_INTERRUPT | SA_SHIRQ, "amd7930", amd)) {
-		snd_printk("amd7930-%d: Unable to grab IRQ %s\n",
+		snd_printk("amd7930-%d: Unable to grab IRQ %d\n",
 			   dev,
-			   __irq_itoa(irq_prop->pri));
+			   irq_prop->pri);
 		snd_amd7930_free(amd);
 		return -EBUSY;
 	}
@@ -1063,11 +1063,11 @@ static int __init amd7930_attach(int prom_node, struct sbus_dev *sdev)
 
 	strcpy(card->driver, "AMD7930");
 	strcpy(card->shortname, "Sun AMD7930");
-	sprintf(card->longname, "%s at 0x%02lx:0x%08lx, irq %s",
+	sprintf(card->longname, "%s at 0x%02lx:0x%08lx, irq %d",
 		card->shortname,
 		rp->flags & 0xffL,
 		rp->start,
-		__irq_itoa(irq_prop.pri));
+		irq_prop.pri);
 
 	if ((err = snd_amd7930_create(card, sdev, rp, reg_prop.reg_size,
 					  &irq_prop, dev, &amd)) < 0)

sound/sparc/cs4231.c

@@ -2003,9 +2003,8 @@ static int __init snd_cs4231_sbus_create(struct snd_card *card,
 
 	if (request_irq(sdev->irqs[0], snd_cs4231_sbus_interrupt,
 			SA_SHIRQ, "cs4231", chip)) {
-		snd_printdd("cs4231-%d: Unable to grab SBUS IRQ %s\n",
-			   dev,
-			   __irq_itoa(sdev->irqs[0]));
+		snd_printdd("cs4231-%d: Unable to grab SBUS IRQ %d\n",
+			    dev, sdev->irqs[0]);
 		snd_cs4231_sbus_free(chip);
 		return -EBUSY;
 	}
@@ -2038,11 +2037,11 @@ static int __init cs4231_sbus_attach(struct sbus_dev *sdev)
 	if (err)
 		return err;
 
-	sprintf(card->longname, "%s at 0x%02lx:0x%08lx, irq %s",
+	sprintf(card->longname, "%s at 0x%02lx:0x%08lx, irq %d",
 		card->shortname,
 		rp->flags & 0xffL,
 		rp->start,
-		__irq_itoa(sdev->irqs[0]));
+		sdev->irqs[0]);
 
 	if ((err = snd_cs4231_sbus_create(card, sdev, dev, &cp)) < 0) {
 		snd_card_free(card);
@@ -2244,10 +2243,10 @@ static int __init cs4231_ebus_attach(struct linux_ebus_device *edev)
 	if (err)
 		return err;
 
-	sprintf(card->longname, "%s at 0x%lx, irq %s",
+	sprintf(card->longname, "%s at 0x%lx, irq %d",
 		card->shortname,
 		edev->resource[0].start,
-		__irq_itoa(edev->irqs[0]));
+		edev->irqs[0]);
 
 	if ((err = snd_cs4231_ebus_create(card, edev, dev, &chip)) < 0) {
 		snd_card_free(card);

sound/sparc/dbri.c

@@ -2645,9 +2645,9 @@ static int __init dbri_attach(int prom_node, struct sbus_dev *sdev)
 	strcpy(card->driver, "DBRI");
 	strcpy(card->shortname, "Sun DBRI");
 	rp = &sdev->resource[0];
-	sprintf(card->longname, "%s at 0x%02lx:0x%08lx, irq %s",
+	sprintf(card->longname, "%s at 0x%02lx:0x%08lx, irq %d",
 		card->shortname,
-		rp->flags & 0xffL, rp->start, __irq_itoa(irq.pri));
+		rp->flags & 0xffL, rp->start, irq.pri);
 
 	if ((err = snd_dbri_create(card, sdev, &irq, dev)) < 0) {
 		snd_card_free(card);