Merge /spare/repo/linux-2.6/

arch/arm/mach-pxa/lubbock.c

@@ -146,6 +146,11 @@ static struct pxa2xx_udc_mach_info udc_info __initdata = {
 	// no D+ pullup; lubbock can't connect/disconnect in software
 };
 
+static struct platform_device lub_audio_device = {
+	.name		= "pxa2xx-ac97",
+	.id		= -1,
+};
+
 static struct resource sa1111_resources[] = {
 	[0] = {
 		.start	= 0x10000000,
@@ -195,6 +200,7 @@ static struct platform_device smc91x_device = {
 
 static struct platform_device *devices[] __initdata = {
 	&sa1111_device,
+	&lub_audio_device,
 	&smc91x_device,
 };
 

arch/i386/Kconfig

@@ -908,11 +908,6 @@ config IRQBALANCE
  	  The default yes will allow the kernel to do irq load balancing.
 	  Saying no will keep the kernel from doing irq load balancing.
 
-config HAVE_DEC_LOCK
-	bool
-	depends on (SMP || PREEMPT) && X86_CMPXCHG
-	default y
-
 # turning this on wastes a bunch of space.
 # Summit needs it only when NUMA is on
 config BOOT_IOREMAP

arch/i386/kernel/acpi/earlyquirk.c

@@ -7,7 +7,6 @@
 #include <linux/pci.h>
 #include <asm/pci-direct.h>
 #include <asm/acpi.h>
-#include <asm/apic.h>
 
 static int __init check_bridge(int vendor, int device)
 {
@@ -16,15 +15,6 @@ static int __init check_bridge(int vendor, int device)
 	if (vendor == PCI_VENDOR_ID_NVIDIA) {
 		acpi_skip_timer_override = 1;
 	}
-#ifdef CONFIG_X86_LOCAL_APIC
-	/*
-	 * ATI IXP chipsets get double timer interrupts.
-	 * For now just do this for all ATI chipsets.
- 	 * FIXME: this needs to be checked for the non ACPI case too.
-	 */
-	if (vendor == PCI_VENDOR_ID_ATI)
-		disable_timer_pin_1 = 1;
-#endif
 	return 0;
 }
 

arch/i386/lib/Makefile

@@ -7,4 +7,3 @@ lib-y = checksum.o delay.o usercopy.o getuser.o putuser.o memcpy.o strstr.o \
 	bitops.o
 
 lib-$(CONFIG_X86_USE_3DNOW) += mmx.o
-lib-$(CONFIG_HAVE_DEC_LOCK) += dec_and_lock.o

arch/i386/lib/dec_and_lock.c

@@ -1,42 +0,0 @@
-/*
- * x86 version of "atomic_dec_and_lock()" using
- * the atomic "cmpxchg" instruction.
- *
- * (For CPU's lacking cmpxchg, we use the slow
- * generic version, and this one never even gets
- * compiled).
- */
-
-#include <linux/spinlock.h>
-#include <linux/module.h>
-#include <asm/atomic.h>
-
-int _atomic_dec_and_lock(atomic_t *atomic, spinlock_t *lock)
-{
-	int counter;
-	int newcount;
-
-repeat:
-	counter = atomic_read(atomic);
-	newcount = counter-1;
-
-	if (!newcount)
-		goto slow_path;
-
-	asm volatile("lock; cmpxchgl %1,%2"
-		:"=a" (newcount)
-		:"r" (newcount), "m" (atomic->counter), "0" (counter));
-
-	/* If the above failed, "eax" will have changed */
-	if (newcount != counter)
-		goto repeat;
-	return 0;
-
-slow_path:
-	spin_lock(lock);
-	if (atomic_dec_and_test(atomic))
-		return 1;
-	spin_unlock(lock);
-	return 0;
-}
-EXPORT_SYMBOL(_atomic_dec_and_lock);

arch/ia64/Kconfig

@@ -298,11 +298,6 @@ config PREEMPT
 
 source "mm/Kconfig"
 
-config HAVE_DEC_LOCK
-	bool
-	depends on (SMP || PREEMPT)
-	default y
-
 config IA32_SUPPORT
 	bool "Support for Linux/x86 binaries"
 	help

arch/ia64/Makefile

@@ -82,17 +82,7 @@ unwcheck: vmlinux
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
 
-archprepare:  include/asm-ia64/.offsets.h.stamp
-
-include/asm-ia64/.offsets.h.stamp:
-	mkdir -p include/asm-ia64
-	[ -s include/asm-ia64/asm-offsets.h ] \
-	|| echo "#define IA64_TASK_SIZE 0" > include/asm-ia64/asm-offsets.h
-	touch $@
-
-
-
-CLEAN_FILES += vmlinux.gz bootloader include/asm-ia64/.offsets.h.stamp
+CLEAN_FILES += vmlinux.gz bootloader
 
 boot:	lib/lib.a vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $@

arch/ia64/ia32/binfmt_elf32.c

@@ -216,12 +216,6 @@ ia32_setup_arg_pages (struct linux_binprm *bprm, int executable_stack)
 	if (!mpnt)
 		return -ENOMEM;
 
-	if (security_vm_enough_memory((IA32_STACK_TOP - (PAGE_MASK & (unsigned long) bprm->p))
-				      >> PAGE_SHIFT)) {
-		kmem_cache_free(vm_area_cachep, mpnt);
-		return -ENOMEM;
-	}
-
 	memset(mpnt, 0, sizeof(*mpnt));
 
 	down_write(&current->mm->mmap_sem);

arch/ia64/kernel/asm-offsets.c

@@ -4,6 +4,7 @@
  * to extract and format the required data.
  */
 
+#define ASM_OFFSETS_C 1
 #include <linux/config.h>
 
 #include <linux/sched.h>

arch/ia64/lib/Makefile

@@ -15,7 +15,6 @@ lib-$(CONFIG_ITANIUM)	+= copy_page.o copy_user.o memcpy.o
 lib-$(CONFIG_MCKINLEY)	+= copy_page_mck.o memcpy_mck.o
 lib-$(CONFIG_PERFMON)	+= carta_random.o
 lib-$(CONFIG_MD_RAID5)	+= xor.o
-lib-$(CONFIG_HAVE_DEC_LOCK) += dec_and_lock.o
 
 AFLAGS___divdi3.o	=
 AFLAGS___udivdi3.o	= -DUNSIGNED

arch/ia64/lib/dec_and_lock.c

@@ -1,42 +0,0 @@
-/*
- * Copyright (C) 2003 Jerome Marchand, Bull S.A.
- *	Cleaned up by David Mosberger-Tang <davidm@hpl.hp.com>
- *
- * This file is released under the GPLv2, or at your option any later version.
- *
- * ia64 version of "atomic_dec_and_lock()" using the atomic "cmpxchg" instruction.  This
- * code is an adaptation of the x86 version of "atomic_dec_and_lock()".
- */
-
-#include <linux/compiler.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <asm/atomic.h>
-
-/*
- * Decrement REFCOUNT and if the count reaches zero, acquire the spinlock.  Both of these
- * operations have to be done atomically, so that the count doesn't drop to zero without
- * acquiring the spinlock first.
- */
-int
-_atomic_dec_and_lock (atomic_t *refcount, spinlock_t *lock)
-{
-	int old, new;
-
-	do {
-		old = atomic_read(refcount);
-		new = old - 1;
-
-		if (unlikely (old == 1)) {
-			/* oops, we may be decrementing to zero, do it the slow way... */
-			spin_lock(lock);
-			if (atomic_dec_and_test(refcount))
-				return 1;
-			spin_unlock(lock);
-			return 0;
-		}
-	} while (cmpxchg(&refcount->counter, old, new) != old);
-	return 0;
-}
-
-EXPORT_SYMBOL(_atomic_dec_and_lock);

arch/m32r/Kconfig

@@ -220,11 +220,6 @@ config PREEMPT
 	  Say Y here if you are building a kernel for a desktop, embedded
 	  or real-time system.  Say N if you are unsure.
 
-config HAVE_DEC_LOCK
-	bool
-	depends on (SMP || PREEMPT)
-	default n
-
 config SMP
 	bool "Symmetric multi-processing support"
 	---help---

arch/mips/Kconfig

@@ -1009,10 +1009,6 @@ config GENERIC_CALIBRATE_DELAY
 	bool
 	default y
 
-config HAVE_DEC_LOCK
-	bool
-	default y
-
 #
 # Select some configuration options automatically based on user selections.
 #

arch/mips/kernel/sysirix.c

@@ -581,18 +581,13 @@ asmlinkage int irix_brk(unsigned long brk)
 	}
 
 	/*
-	 * Check if we have enough memory..
+	 * Ok, looks good - let it rip.
 	 */
-	if (security_vm_enough_memory((newbrk-oldbrk) >> PAGE_SHIFT)) {
+	if (do_brk(oldbrk, newbrk-oldbrk) != oldbrk) {
 		ret = -ENOMEM;
 		goto out;
 	}
-
-	/*
-	 * Ok, looks good - let it rip.
-	 */
 	mm->brk = brk;
-	do_brk(oldbrk, newbrk-oldbrk);
 	ret = 0;
 
 out:

arch/mips/lib/Makefile

@@ -2,7 +2,7 @@
 # Makefile for MIPS-specific library files..
 #
 
-lib-y	+= csum_partial_copy.o dec_and_lock.o memcpy.o promlib.o \
+lib-y	+= csum_partial_copy.o memcpy.o promlib.o \
 	   strlen_user.o strncpy_user.o strnlen_user.o
 
 obj-y	+= iomap.o

arch/mips/lib/dec_and_lock.c

@@ -1,47 +0,0 @@
-/*
- * MIPS version of atomic_dec_and_lock() using cmpxchg
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <asm/atomic.h>
-#include <asm/system.h>
-
-/*
- * This is an implementation of the notion of "decrement a
- * reference count, and return locked if it decremented to zero".
- *
- * This implementation can be used on any architecture that
- * has a cmpxchg, and where atomic->value is an int holding
- * the value of the atomic (i.e. the high bits aren't used
- * for a lock or anything like that).
- */
-int _atomic_dec_and_lock(atomic_t *atomic, spinlock_t *lock)
-{
-	int counter;
-	int newcount;
-
-	for (;;) {
-		counter = atomic_read(atomic);
-		newcount = counter - 1;
-		if (!newcount)
-			break;		/* do it the slow way */
-
-		newcount = cmpxchg(&atomic->counter, counter, newcount);
-		if (newcount == counter)
-			return 0;
-	}
-
-	spin_lock(lock);
-	if (atomic_dec_and_test(atomic))
-		return 1;
-	spin_unlock(lock);
-	return 0;
-}
-
-EXPORT_SYMBOL(_atomic_dec_and_lock);

arch/ppc/Kconfig

@@ -26,10 +26,6 @@ config GENERIC_CALIBRATE_DELAY
 	bool
 	default y
 
-config HAVE_DEC_LOCK
-	bool
-	default y
-
 config PPC
 	bool
 	default y

arch/ppc/lib/Makefile

@@ -2,7 +2,7 @@
 # Makefile for ppc-specific library files..
 #
 
-obj-y			:= checksum.o string.o strcase.o dec_and_lock.o div64.o
+obj-y			:= checksum.o string.o strcase.o div64.o
 
 obj-$(CONFIG_8xx)	+= rheap.o
 obj-$(CONFIG_CPM2)	+= rheap.o

arch/ppc/lib/dec_and_lock.c

@@ -1,38 +0,0 @@
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <asm/atomic.h>
-#include <asm/system.h>
-
-/*
- * This is an implementation of the notion of "decrement a
- * reference count, and return locked if it decremented to zero".
- *
- * This implementation can be used on any architecture that
- * has a cmpxchg, and where atomic->value is an int holding
- * the value of the atomic (i.e. the high bits aren't used
- * for a lock or anything like that).
- */
-int _atomic_dec_and_lock(atomic_t *atomic, spinlock_t *lock)
-{
-	int counter;
-	int newcount;
-
-	for (;;) {
-		counter = atomic_read(atomic);
-		newcount = counter - 1;
-		if (!newcount)
-			break;		/* do it the slow way */
-
-		newcount = cmpxchg(&atomic->counter, counter, newcount);
-		if (newcount == counter)
-			return 0;
-	}
-
-	spin_lock(lock);
-	if (atomic_dec_and_test(atomic))
-		return 1;
-	spin_unlock(lock);
-	return 0;
-}
-
-EXPORT_SYMBOL(_atomic_dec_and_lock);

arch/ppc64/Kconfig

@@ -28,10 +28,6 @@ config GENERIC_ISA_DMA
 	bool
 	default y
 
-config HAVE_DEC_LOCK
-	bool
-	default y
-
 config EARLY_PRINTK
 	bool
 	default y

arch/ppc64/kernel/head.S

@@ -1649,7 +1649,7 @@ _GLOBAL(__secondary_start)
 	ld	r3,0(r3)
 	lwz	r3,PLATFORM(r3)		/* r3 = platform flags		 */
 	andi.	r3,r3,PLATFORM_LPAR	/* Test if bit 0 is set (LPAR bit) */
-	bne	98f
+	beq	98f			/* branch if result is 0  */
 	mfspr	r3,PVR
 	srwi	r3,r3,16
 	cmpwi	r3,0x37			/* SStar  */
@@ -1813,7 +1813,7 @@ _STATIC(start_here_multiplatform)
 	ld	r3,0(r3)
 	lwz	r3,PLATFORM(r3)		/* r3 = platform flags */
 	andi.	r3,r3,PLATFORM_LPAR	/* Test if bit 0 is set (LPAR bit) */
-	bne	98f
+	beq	98f			/* branch if result is 0  */
 	mfspr	r3,PVR
 	srwi	r3,r3,16
 	cmpwi	r3,0x37			/* SStar */
@@ -1834,7 +1834,7 @@ _STATIC(start_here_multiplatform)
 	lwz	r3,PLATFORM(r3)		/* r3 = platform flags */
 	/* Test if bit 0 is set (LPAR bit) */
 	andi.	r3,r3,PLATFORM_LPAR
-	bne	98f
+	bne	98f			/* branch if result is !0  */
 	LOADADDR(r6,_SDR1)		/* Only if NOT LPAR */
 	sub	r6,r6,r26
 	ld	r6,0(r6)		/* get the value of _SDR1 */

arch/ppc64/kernel/vdso.c

@@ -224,10 +224,7 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int executable_stack)
 	vma = kmem_cache_alloc(vm_area_cachep, SLAB_KERNEL);
 	if (vma == NULL)
 		return -ENOMEM;
-	if (security_vm_enough_memory(vdso_pages)) {
-		kmem_cache_free(vm_area_cachep, vma);
-		return -ENOMEM;
-	}
+
 	memset(vma, 0, sizeof(*vma));
 
 	/*
@@ -237,8 +234,10 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int executable_stack)
 	 */
 	vdso_base = get_unmapped_area(NULL, vdso_base,
 				      vdso_pages << PAGE_SHIFT, 0, 0);
-	if (vdso_base & ~PAGE_MASK)
+	if (vdso_base & ~PAGE_MASK) {
+		kmem_cache_free(vm_area_cachep, vma);
 		return (int)vdso_base;
+	}
 
 	current->thread.vdso_base = vdso_base;
 
@@ -266,7 +265,11 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int executable_stack)
 	vma->vm_ops = &vdso_vmops;
 
 	down_write(&mm->mmap_sem);
-	insert_vm_struct(mm, vma);
+	if (insert_vm_struct(mm, vma)) {
+		up_write(&mm->mmap_sem);
+		kmem_cache_free(vm_area_cachep, vma);
+		return -ENOMEM;
+	}
 	mm->total_vm += (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
 	up_write(&mm->mmap_sem);
 

arch/ppc64/lib/Makefile

@@ -2,7 +2,7 @@
 # Makefile for ppc64-specific library files..
 #
 
-lib-y := checksum.o dec_and_lock.o string.o strcase.o
+lib-y := checksum.o string.o strcase.o
 lib-y += copypage.o memcpy.o copyuser.o usercopy.o
 
 # Lock primitives are defined as no-ops in include/linux/spinlock.h

arch/ppc64/lib/dec_and_lock.c

@@ -1,47 +0,0 @@
-/*
- * ppc64 version of atomic_dec_and_lock() using cmpxchg
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <asm/atomic.h>
-#include <asm/system.h>
-
-/*
- * This is an implementation of the notion of "decrement a
- * reference count, and return locked if it decremented to zero".
- *
- * This implementation can be used on any architecture that
- * has a cmpxchg, and where atomic->value is an int holding
- * the value of the atomic (i.e. the high bits aren't used
- * for a lock or anything like that).
- */
-int _atomic_dec_and_lock(atomic_t *atomic, spinlock_t *lock)
-{
-	int counter;
-	int newcount;
-
-	for (;;) {
-		counter = atomic_read(atomic);
-		newcount = counter - 1;
-		if (!newcount)
-			break;		/* do it the slow way */
-
-		newcount = cmpxchg(&atomic->counter, counter, newcount);
-		if (newcount == counter)
-			return 0;
-	}
-
-	spin_lock(lock);
-	if (atomic_dec_and_test(atomic))
-		return 1;
-	spin_unlock(lock);
-	return 0;
-}
-
-EXPORT_SYMBOL(_atomic_dec_and_lock);

arch/sparc64/Kconfig.debug

@@ -33,14 +33,6 @@ config DEBUG_BOOTMEM
 	depends on DEBUG_KERNEL
 	bool "Debug BOOTMEM initialization"
 
-# We have a custom atomic_dec_and_lock() implementation but it's not
-# compatible with spinlock debugging so we need to fall back on
-# the generic version in that case.
-config HAVE_DEC_LOCK
-	bool
-	depends on SMP && !DEBUG_SPINLOCK
-	default y
-
 config MCOUNT
 	bool
 	depends on STACK_DEBUG

arch/sparc64/kernel/sparc64_ksyms.c

@@ -163,9 +163,6 @@ EXPORT_SYMBOL(atomic64_add);
 EXPORT_SYMBOL(atomic64_add_ret);
 EXPORT_SYMBOL(atomic64_sub);
 EXPORT_SYMBOL(atomic64_sub_ret);
-#ifdef CONFIG_SMP
-EXPORT_SYMBOL(_atomic_dec_and_lock);
-#endif
 
 /* Atomic bit operations. */
 EXPORT_SYMBOL(test_and_set_bit);

arch/sparc64/lib/Makefile

@@ -14,6 +14,4 @@ lib-y := PeeCeeI.o copy_page.o clear_page.o strlen.o strncmp.o \
 	 copy_in_user.o user_fixup.o memmove.o \
 	 mcount.o ipcsum.o rwsem.o xor.o find_bit.o delay.o
 
-lib-$(CONFIG_HAVE_DEC_LOCK) += dec_and_lock.o
-
 obj-y += iomap.o

arch/sparc64/lib/dec_and_lock.S

@@ -1,80 +0,0 @@
-/* $Id: dec_and_lock.S,v 1.5 2001/11/18 00:12:56 davem Exp $
- * dec_and_lock.S: Sparc64 version of "atomic_dec_and_lock()"
- *                 using cas and ldstub instructions.
- *
- * Copyright (C) 2000 David S. Miller (davem@redhat.com)
- */
-#include <linux/config.h>
-#include <asm/thread_info.h>
-
-	.text
-	.align	64
-
-	/* CAS basically works like this:
-	 *
-	 * void CAS(MEM, REG1, REG2)
-	 * {
-	 *   START_ATOMIC();
-	 *   if (*(MEM) == REG1) {
-	 *     TMP = *(MEM);
-	 *     *(MEM) = REG2;
-	 *     REG2 = TMP;
-	 *   } else
-	 *     REG2 = *(MEM);
-	 *   END_ATOMIC();
-	 * }
-	 */
-
-	.globl	_atomic_dec_and_lock
-_atomic_dec_and_lock:	/* %o0 = counter, %o1 = lock */
-loop1:	lduw	[%o0], %g2
-	subcc	%g2, 1, %g7
-	be,pn	%icc, start_to_zero
-	 nop
-nzero:	cas	[%o0], %g2, %g7
-	cmp	%g2, %g7
-	bne,pn	%icc, loop1
-	 mov	0, %g1
-
-out:
-	membar	#StoreLoad | #StoreStore
-	retl
-	 mov	%g1, %o0
-start_to_zero:
-#ifdef CONFIG_PREEMPT
-	ldsw	[%g6 + TI_PRE_COUNT], %g3
-	add	%g3, 1, %g3
-	stw	%g3, [%g6 + TI_PRE_COUNT]
-#endif
-to_zero:
-	ldstub	[%o1], %g3
-	membar	#StoreLoad | #StoreStore
-	brnz,pn	%g3, spin_on_lock
-	 nop
-loop2:	cas	[%o0], %g2, %g7		/* ASSERT(g7 == 0) */
-	cmp	%g2, %g7
-
-	be,pt	%icc, out
-	 mov	1, %g1
-	lduw	[%o0], %g2
-	subcc	%g2, 1, %g7
-	be,pn	%icc, loop2
-	 nop
-	membar	#StoreStore | #LoadStore
-	stb	%g0, [%o1]
-#ifdef CONFIG_PREEMPT
-	ldsw	[%g6 + TI_PRE_COUNT], %g3
-	sub	%g3, 1, %g3
-	stw	%g3, [%g6 + TI_PRE_COUNT]
-#endif
-
-	b,pt	%xcc, nzero
-	 nop
-spin_on_lock:
-	ldub	[%o1], %g3
-	membar	#LoadLoad
-	brnz,pt	%g3, spin_on_lock
-	 nop
-	ba,pt	%xcc, to_zero
-	 nop
-	nop

arch/x86_64/Kconfig

@@ -277,11 +277,6 @@ source "mm/Kconfig"
 config HAVE_ARCH_EARLY_PFN_TO_NID
 	def_bool y
 
-config HAVE_DEC_LOCK
-	bool
-	depends on SMP
-	default y
-
 config NR_CPUS
 	int "Maximum number of CPUs (2-256)"
 	range 2 256

arch/x86_64/ia32/ia32_binfmt.c

@@ -353,11 +353,6 @@ int setup_arg_pages(struct linux_binprm *bprm, unsigned long stack_top, int exec
 	mpnt = kmem_cache_alloc(vm_area_cachep, SLAB_KERNEL);
 	if (!mpnt) 
 		return -ENOMEM; 
-	
-	if (security_vm_enough_memory((IA32_STACK_TOP - (PAGE_MASK & (unsigned long) bprm->p))>>PAGE_SHIFT)) {
-		kmem_cache_free(vm_area_cachep, mpnt);
-		return -ENOMEM;
-	}
 
 	memset(mpnt, 0, sizeof(*mpnt));
 

arch/x86_64/ia32/syscall32.c

@@ -52,17 +52,13 @@ int syscall32_setup_pages(struct linux_binprm *bprm, int exstack)
 	vma = kmem_cache_alloc(vm_area_cachep, SLAB_KERNEL);
 	if (!vma)
 		return -ENOMEM;
-	if (security_vm_enough_memory(npages)) {
-		kmem_cache_free(vm_area_cachep, vma);
-		return -ENOMEM;
-	}
 
 	memset(vma, 0, sizeof(struct vm_area_struct));
 	/* Could randomize here */
 	vma->vm_start = VSYSCALL32_BASE;
 	vma->vm_end = VSYSCALL32_END;
 	/* MAYWRITE to allow gdb to COW and set breakpoints */
-	vma->vm_flags = VM_READ|VM_EXEC|VM_MAYREAD|VM_MAYEXEC|VM_MAYEXEC|VM_MAYWRITE;
+	vma->vm_flags = VM_READ|VM_EXEC|VM_MAYREAD|VM_MAYEXEC|VM_MAYWRITE;
 	vma->vm_flags |= mm->def_flags;
 	vma->vm_page_prot = protection_map[vma->vm_flags & 7];
 	vma->vm_ops = &syscall32_vm_ops;

arch/x86_64/kernel/io_apic.c

@@ -299,15 +299,6 @@ void __init check_ioapic(void)
 #endif
 					/* RED-PEN skip them on mptables too? */
 					return;
-				case PCI_VENDOR_ID_ATI:
-					/* All timer interrupts on atiixp
-				           are doubled. Disable one. */
-					if (disable_timer_pin_1 == 0) {
-						disable_timer_pin_1 = 1;
-						printk(KERN_INFO
-		"ATI board detected. Disabling timer pin 1.\n");
-					}
-					return;
 				} 
 
 				/* No multi-function device? */

arch/x86_64/kernel/x8664_ksyms.c

@@ -178,10 +178,6 @@ EXPORT_SYMBOL(rwsem_down_write_failed_thunk);
 
 EXPORT_SYMBOL(empty_zero_page);
 
-#ifdef CONFIG_HAVE_DEC_LOCK
-EXPORT_SYMBOL(_atomic_dec_and_lock);
-#endif
-
 EXPORT_SYMBOL(die_chain);
 EXPORT_SYMBOL(register_die_notifier);
 

arch/x86_64/lib/Makefile

@@ -10,5 +10,3 @@ lib-y := csum-partial.o csum-copy.o csum-wrappers.o delay.o \
 	usercopy.o getuser.o putuser.o  \
 	thunk.o clear_page.o copy_page.o bitstr.o bitops.o
 lib-y += memcpy.o memmove.o memset.o copy_user.o
-
-lib-$(CONFIG_HAVE_DEC_LOCK) += dec_and_lock.o

arch/x86_64/lib/dec_and_lock.c

@@ -1,40 +0,0 @@
-/*
- * x86 version of "atomic_dec_and_lock()" using
- * the atomic "cmpxchg" instruction.
- *
- * (For CPU's lacking cmpxchg, we use the slow
- * generic version, and this one never even gets
- * compiled).
- */
-
-#include <linux/spinlock.h>
-#include <asm/atomic.h>
-
-int _atomic_dec_and_lock(atomic_t *atomic, spinlock_t *lock)
-{
-	int counter;
-	int newcount;
-
-repeat:
-	counter = atomic_read(atomic);
-	newcount = counter-1;
-
-	if (!newcount)
-		goto slow_path;
-
-	asm volatile("lock; cmpxchgl %1,%2"
-		:"=a" (newcount)
-		:"r" (newcount), "m" (atomic->counter), "0" (counter));
-
-	/* If the above failed, "eax" will have changed */
-	if (newcount != counter)
-		goto repeat;
-	return 0;
-
-slow_path:
-	spin_lock(lock);
-	if (atomic_dec_and_test(atomic))
-		return 1;
-	spin_unlock(lock);
-	return 0;
-}

arch/xtensa/Kconfig

@@ -26,10 +26,6 @@ config RWSEM_XCHGADD_ALGORITHM
 	bool
 	default y
 
-config HAVE_DEC_LOCK
-	bool
-	default y
-
 config GENERIC_HARDIRQS
 	bool
 	default y

drivers/char/hvc_console.c

@@ -839,9 +839,6 @@ int __init hvc_init(void)
 	hvc_driver->flags = TTY_DRIVER_REAL_RAW;
 	tty_set_operations(hvc_driver, &hvc_ops);
 
-	if (tty_register_driver(hvc_driver))
-		panic("Couldn't register hvc console driver\n");
-
 	/* Always start the kthread because there can be hotplug vty adapters
 	 * added later. */
 	hvc_task = kthread_run(khvcd, NULL, "khvcd");
@@ -851,6 +848,9 @@ int __init hvc_init(void)
 		return -EIO;
 	}
 
+	if (tty_register_driver(hvc_driver))
+		panic("Couldn't register hvc console driver\n");
+
 	return 0;
 }
 module_init(hvc_init);

drivers/char/vt.c

@@ -810,13 +810,14 @@ int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int lines)
 			 * from the top and bottom of cursor position
 			 */
 			old_origin += (vc->vc_y - new_rows/2) * old_row_size;
-			end = old_origin + new_screen_size;
+			end = old_origin + (old_row_size * new_rows);
 		}
 	} else
 		/*
 		 * Cursor near the top, copy contents from the top of buffer
 		 */
-		end = (old_rows > new_rows) ? old_origin + new_screen_size :
+		end = (old_rows > new_rows) ? old_origin +
+			(old_row_size * new_rows) :
 			vc->vc_scr_end;
 
 	update_attr(vc);

drivers/char/watchdog/mpcore_wdt.c

@@ -30,6 +30,8 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/device.h>
+
+#include <asm/hardware/arm_twd.h>
 #include <asm/uaccess.h>
 
 struct mpcore_wdt {

drivers/i2c/busses/i2c-pxa.c

@@ -914,19 +914,23 @@ static int i2c_pxa_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num
 	return ret;
 }
 
+static u32 i2c_pxa_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
 static struct i2c_algorithm i2c_pxa_algorithm = {
-	.name		= "PXA-I2C-Algorithm",
-	.id		= I2C_ALGO_PXA,
 	.master_xfer	= i2c_pxa_xfer,
+	.functionality	= i2c_pxa_functionality,
 };
 
 static struct pxa_i2c i2c_pxa = {
 	.lock	= SPIN_LOCK_UNLOCKED,
 	.wait	= __WAIT_QUEUE_HEAD_INITIALIZER(i2c_pxa.wait),
 	.adap	= {
-		.name		= "pxa2xx-i2c",
-		.id		= I2C_ALGO_PXA,
+		.owner		= THIS_MODULE,
 		.algo		= &i2c_pxa_algorithm,
+		.name		= "pxa2xx-i2c",
 		.retries	= 5,
 	},
 };

drivers/isdn/hisax/sedlbauer_cs.c

@@ -611,7 +611,7 @@ static int sedlbauer_event(event_t event, int priority,
 } /* sedlbauer_event */
 
 static struct pcmcia_device_id sedlbauer_ids[] = {
-	PCMCIA_DEVICE_PROD_ID1234("SEDLBAUER", "speed star II", "V 3.1", "(c) 93 - 98 cb ", 0x81fb79f5, 0xf3612e1d, 0x6b95c78a, 0x50d4149c),
+	PCMCIA_DEVICE_PROD_ID123("SEDLBAUER", "speed star II", "V 3.1", 0x81fb79f5, 0xf3612e1d, 0x6b95c78a),
 	PCMCIA_DEVICE_PROD_ID123("SEDLBAUER", "ISDN-Adapter", "4D67", 0x81fb79f5, 0xe4e9bc12, 0x397b7e90),
 	PCMCIA_DEVICE_PROD_ID123("SEDLBAUER", "ISDN-Adapter", "4D98", 0x81fb79f5, 0xe4e9bc12, 0x2e5c7fce),
 	PCMCIA_DEVICE_PROD_ID123("SEDLBAUER", "ISDN-Adapter", " (C) 93-94 VK", 0x81fb79f5, 0xe4e9bc12, 0x8db143fe),

drivers/pci/pci.c

@@ -309,17 +309,25 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state)
 
 	pci_read_config_word(dev, pm + PCI_PM_CTRL, &pmcsr);
 
-	/* If we're in D3, force entire word to 0.
+	/* If we're (effectively) in D3, force entire word to 0.
 	 * This doesn't affect PME_Status, disables PME_En, and
 	 * sets PowerState to 0.
 	 */
-	if (dev->current_state >= PCI_D3hot) {
-		if (!(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET))
+	switch (dev->current_state) {
+	case PCI_UNKNOWN: /* Boot-up */
+		if ((pmcsr & PCI_PM_CTRL_STATE_MASK) == PCI_D3hot
+		 && !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET))
 			need_restore = 1;
+		/* Fall-through: force to D0 */
+	case PCI_D3hot:
+	case PCI_D3cold:
+	case PCI_POWER_ERROR:
 		pmcsr = 0;
-	} else {
+		break;
+	default:
 		pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
 		pmcsr |= state;
+		break;
 	}
 
 	/* enter specified state */

drivers/pcmcia/yenta_socket.c

@@ -1045,7 +1045,18 @@ static int __devinit yenta_probe (struct pci_dev *dev, const struct pci_device_i
 {
 	struct yenta_socket *socket;
 	int ret;
-	
+
+	/*
+	 * If we failed to assign proper bus numbers for this cardbus
+	 * controller during PCI probe, its subordinate pci_bus is NULL.
+	 * Bail out if so.
+	 */
+	if (!dev->subordinate) {
+		printk(KERN_ERR "Yenta: no bus associated with %s! "
+			"(try 'pci=assign-busses')\n", pci_name(dev));
+		return -ENODEV;
+	}
+
 	socket = kmalloc(sizeof(struct yenta_socket), GFP_KERNEL);
 	if (!socket)
 		return -ENOMEM;

drivers/scsi/sata_sis.c

@@ -161,7 +161,7 @@ static u32 sis_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg)
 {
 	struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
 	unsigned int cfg_addr = get_scr_cfg_addr(ap->port_no, sc_reg, pdev->device);
-	u32 val, val2;
+	u32 val, val2 = 0;
 	u8 pmr;
 
 	if (sc_reg == SCR_ERROR) /* doesn't exist in PCI cfg space */
@@ -289,7 +289,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (ent->device != 0x182) {
 		if ((pmr & SIS_PMR_COMBINED) == 0) {
 			printk(KERN_INFO "sata_sis: Detected SiS 180/181 chipset in SATA mode\n");
-			port2_start=0x64;
+			port2_start = 64;
 		}
 		else {
 			printk(KERN_INFO "sata_sis: Detected SiS 180/181 chipset in combined mode\n");

drivers/serial/21285.c

@@ -463,7 +463,7 @@ static int __init serial21285_console_setup(struct console *co, char *options)
 	return uart_set_options(port, co, baud, parity, bits, flow);
 }
 
-extern struct uart_driver serial21285_reg;
+static struct uart_driver serial21285_reg;
 
 static struct console serial21285_console =
 {

drivers/serial/amba-pl010.c

@@ -689,7 +689,7 @@ static int __init pl010_console_setup(struct console *co, char *options)
 	return uart_set_options(port, co, baud, parity, bits, flow);
 }
 
-extern struct uart_driver amba_reg;
+static struct uart_driver amba_reg;
 static struct console amba_console = {
 	.name		= "ttyAM",
 	.write		= pl010_console_write,

drivers/serial/amba-pl011.c

@@ -701,7 +701,7 @@ static int __init pl011_console_setup(struct console *co, char *options)
 	return uart_set_options(&uap->port, co, baud, parity, bits, flow);
 }
 
-extern struct uart_driver amba_reg;
+static struct uart_driver amba_reg;
 static struct console amba_console = {
 	.name		= "ttyAMA",
 	.write		= pl011_console_write,

drivers/serial/clps711x.c

@@ -525,7 +525,7 @@ static int __init clps711xuart_console_setup(struct console *co, char *options)
 	return uart_set_options(port, co, baud, parity, bits, flow);
 }
 
-extern struct uart_driver clps711x_reg;
+static struct uart_driver clps711x_reg;
 static struct console clps711x_console = {
 	.name		= "ttyCL",
 	.write		= clps711xuart_console_write,

drivers/serial/pxa.c

@@ -589,8 +589,8 @@ serial_pxa_type(struct uart_port *port)
 
 #ifdef CONFIG_SERIAL_PXA_CONSOLE
 
-extern struct uart_pxa_port serial_pxa_ports[];
-extern struct uart_driver serial_pxa_reg;
+static struct uart_pxa_port serial_pxa_ports[];
+static struct uart_driver serial_pxa_reg;
 
 #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
 

drivers/serial/sa1100.c

@@ -799,7 +799,7 @@ sa1100_console_setup(struct console *co, char *options)
 	return uart_set_options(&sport->port, co, baud, parity, bits, flow);
 }
 
-extern struct uart_driver sa1100_reg;
+static struct uart_driver sa1100_reg;
 static struct console sa1100_console = {
 	.name		= "ttySA",
 	.write		= sa1100_console_write,

drivers/serial/serial_lh7a40x.c

@@ -632,7 +632,7 @@ static int __init lh7a40xuart_console_setup (struct console* co, char* options)
 	return uart_set_options (port, co, baud, parity, bits, flow);
 }
 
-extern struct uart_driver lh7a40x_reg;
+static struct uart_driver lh7a40x_reg;
 static struct console lh7a40x_console = {
 	.name		= "ttyAM",
 	.write		= lh7a40xuart_console_write,

drivers/video/console/vgacon.c

@@ -1020,7 +1020,9 @@ static int vgacon_font_get(struct vc_data *c, struct console_font *font)
 static int vgacon_resize(struct vc_data *c, unsigned int width,
 				unsigned int height)
 {
-	if (width % 2 || width > ORIG_VIDEO_COLS || height > ORIG_VIDEO_LINES)
+	if (width % 2 || width > ORIG_VIDEO_COLS ||
+	    height > (ORIG_VIDEO_LINES * vga_default_font_height)/
+	    c->vc_font.height)
 		return -EINVAL;
 
 	if (CON_IS_VISIBLE(c) && !vga_is_gfx) /* who knows */

drivers/video/nvidia/nv_i2c.c

@@ -209,10 +209,13 @@ int nvidia_probe_i2c_connector(struct fb_info *info, int conn, u8 **out_edid)
 
 	if (!edid && conn == 1) {
 		/* try to get from firmware */
-		edid = kmalloc(EDID_LENGTH, GFP_KERNEL);
-		if (edid)
-			memcpy(edid, fb_firmware_edid(info->device),
-			       EDID_LENGTH);
+		const u8 *e = fb_firmware_edid(info->device);
+
+		if (e != NULL) {
+			edid = kmalloc(EDID_LENGTH, GFP_KERNEL);
+			if (edid)
+				memcpy(edid, e, EDID_LENGTH);
+		}
 	}
 
 	if (out_edid)

drivers/video/savage/savagefb-i2c.c

@@ -274,10 +274,13 @@ int savagefb_probe_i2c_connector(struct fb_info *info, u8 **out_edid)
 
 	if (!edid) {
 		/* try to get from firmware */
-		edid = kmalloc(EDID_LENGTH, GFP_KERNEL);
-		if (edid)
-			memcpy(edid, fb_firmware_edid(info->device),
-			       EDID_LENGTH);
+		const u8 *e = fb_firmware_edid(info->device);
+
+		if (e) {
+			edid = kmalloc(EDID_LENGTH, GFP_KERNEL);
+			if (edid)
+				memcpy(edid, e, EDID_LENGTH);
+		}
 	}
 
 	if (out_edid)

drivers/video/savage/savagefb.h

@@ -60,8 +60,6 @@
 
 #define S3_SAVAGE_SERIES(chip)    ((chip>=S3_SAVAGE3D) && (chip<=S3_SAVAGE2000))
 
-#define S3_MOBILE_TWISTER_SERIES(chip) ((chip==S3_TWISTER) || (chip == S3_PROSAVAGEDDR))
-
 /* Chip tags.  These are used to group the adapters into
  * related families.
  */
@@ -74,8 +72,6 @@ typedef enum {
   S3_PROSAVAGE,
   S3_SUPERSAVAGE,
   S3_SAVAGE2000,
-  S3_PROSAVAGEDDR,
-  S3_TWISTER,
   S3_LAST
 } savage_chipset;
 

drivers/video/savage/savagefb_driver.c

@@ -1773,8 +1773,7 @@ static int __devinit savage_init_hw (struct savagefb_par *par)
 		}
 	}
 
-	if (S3_SAVAGE_MOBILE_SERIES(par->chip) ||
-	    (S3_MOBILE_TWISTER_SERIES(par->chip) && !par->crtonly))
+	if (S3_SAVAGE_MOBILE_SERIES(par->chip) && !par->crtonly)
 		par->display_type = DISP_LCD;
 	else if (dvi || (par->chip == S3_SAVAGE4 && par->dvi))
 		par->display_type = DISP_DFP;
@@ -1783,7 +1782,7 @@ static int __devinit savage_init_hw (struct savagefb_par *par)
 
 	/* Check LCD panel parrmation */
 
-	if (par->chip == S3_SAVAGE_MX) {
+	if (par->display_type == DISP_LCD) {
 		unsigned char cr6b = VGArCR( 0x6b );
 
 		int panelX = (VGArSEQ (0x61) +
@@ -1922,15 +1921,15 @@ static int __devinit savage_init_fb_info (struct fb_info *info,
 		snprintf (info->fix.id, 16, "ProSavageKM");
 		break;
 	case FB_ACCEL_S3TWISTER_P:
-		par->chip = S3_TWISTER;
+		par->chip = S3_PROSAVAGE;
 		snprintf (info->fix.id, 16, "TwisterP");
 		break;
 	case FB_ACCEL_S3TWISTER_K:
-		par->chip = S3_TWISTER;
+		par->chip = S3_PROSAVAGE;
 		snprintf (info->fix.id, 16, "TwisterK");
 		break;
 	case FB_ACCEL_PROSAVAGE_DDR:
-		par->chip = S3_PROSAVAGEDDR;
+		par->chip = S3_PROSAVAGE;
 		snprintf (info->fix.id, 16, "ProSavageDDR");
 		break;
 	case FB_ACCEL_PROSAVAGE_DDRK:

fs/compat.c

@@ -44,6 +44,8 @@
 #include <linux/nfsd/syscall.h>
 #include <linux/personality.h>
 #include <linux/rwsem.h>
+#include <linux/acct.h>
+#include <linux/mm.h>
 
 #include <net/sock.h>		/* siocdevprivate_ioctl */
 
@@ -1487,6 +1489,8 @@ int compat_do_execve(char * filename,
 
 		/* execve success */
 		security_bprm_free(bprm);
+		acct_update_integrals(current);
+		update_mem_hiwater(current);
 		kfree(bprm);
 		return retval;
 	}

fs/exec.c

@@ -421,11 +421,6 @@ int setup_arg_pages(struct linux_binprm *bprm,
 	if (!mpnt)
 		return -ENOMEM;
 
-	if (security_vm_enough_memory(arg_size >> PAGE_SHIFT)) {
-		kmem_cache_free(vm_area_cachep, mpnt);
-		return -ENOMEM;
-	}
-
 	memset(mpnt, 0, sizeof(*mpnt));
 
 	down_write(&mm->mmap_sem);
@@ -745,8 +740,8 @@ static inline int de_thread(struct task_struct *tsk)
         }
 
 	/*
-	 * Now there are really no other threads at all,
-	 * so it's safe to stop telling them to kill themselves.
+	 * There may be one thread left which is just exiting,
+	 * but it's safe to stop telling the group to kill themselves.
 	 */
 	sig->flags = 0;
 
@@ -785,7 +780,6 @@ no_thread_group:
 			kmem_cache_free(sighand_cachep, oldsighand);
 	}
 
-	BUG_ON(!thread_group_empty(current));
 	BUG_ON(!thread_group_leader(current));
 	return 0;
 }

fs/file.c

@@ -69,13 +69,9 @@ void free_fd_array(struct file **array, int num)
 
 static void __free_fdtable(struct fdtable *fdt)
 {
-	int fdset_size, fdarray_size;
-
-	fdset_size = fdt->max_fdset / 8;
-	fdarray_size = fdt->max_fds * sizeof(struct file *);
-	free_fdset(fdt->open_fds, fdset_size);
-	free_fdset(fdt->close_on_exec, fdset_size);
-	free_fd_array(fdt->fd, fdarray_size);
+	free_fdset(fdt->open_fds, fdt->max_fdset);
+	free_fdset(fdt->close_on_exec, fdt->max_fdset);
+	free_fd_array(fdt->fd, fdt->max_fds);
 	kfree(fdt);
 }
 

include/asm-arm/hardware/arm_twd.h

@@ -0,0 +1,16 @@
+#ifndef __ASM_HARDWARE_TWD_H
+#define __ASM_HARDWARE_TWD_H
+
+#define TWD_TIMER_LOAD 		0x00
+#define TWD_TIMER_COUNTER		0x04
+#define TWD_TIMER_CONTROL		0x08
+#define TWD_TIMER_INTSTAT		0x0C
+
+#define TWD_WDOG_LOAD			0x20
+#define TWD_WDOG_COUNTER		0x24
+#define TWD_WDOG_CONTROL		0x28
+#define TWD_WDOG_INTSTAT		0x2C
+#define TWD_WDOG_RESETSTAT		0x30
+#define TWD_WDOG_DISABLE		0x34
+
+#endif

include/asm-ia64/ptrace.h

@@ -57,7 +57,9 @@
 #include <linux/config.h>
 
 #include <asm/fpu.h>
+#ifndef ASM_OFFSETS_C
 #include <asm/asm-offsets.h>
+#endif
 
 /*
  * Base-2 logarithm of number of pages to allocate per task structure

include/asm-ia64/thread_info.h

@@ -5,7 +5,9 @@
 #ifndef _ASM_IA64_THREAD_INFO_H
 #define _ASM_IA64_THREAD_INFO_H
 
+#ifndef ASM_OFFSETS_C
 #include <asm/asm-offsets.h>
+#endif
 #include <asm/processor.h>
 #include <asm/ptrace.h>
 
@@ -51,9 +53,14 @@ struct thread_info {
 	},					\
 }
 
+#ifndef ASM_OFFSETS_C
 /* how to get the thread information struct from C */
 #define current_thread_info()	((struct thread_info *) ((char *) current + IA64_TASK_SIZE))
 #define alloc_thread_info(tsk)	((struct thread_info *) ((char *) (tsk) + IA64_TASK_SIZE))
+#else
+#define current_thread_info()	((struct thread_info *) 0)
+#define alloc_thread_info(tsk)	((struct thread_info *) 0)
+#endif
 #define free_thread_info(ti)	/* nothing */
 
 #define __HAVE_ARCH_TASK_STRUCT_ALLOCATOR

include/asm-ppc/tlbflush.h

@@ -72,7 +72,7 @@ static inline void flush_tlb_page(struct vm_area_struct *vma,
 static inline void flush_tlb_page_nohash(struct vm_area_struct *vma,
 					 unsigned long vmaddr)
 	{ _tlbie(vmaddr); }
-static inline void flush_tlb_range(struct mm_struct *mm,
+static inline void flush_tlb_range(struct vm_area_struct *vma,
 				unsigned long start, unsigned long end)
 	{ __tlbia(); }
 static inline void flush_tlb_kernel_range(unsigned long start,

include/linux/netlink.h

@@ -20,6 +20,7 @@
 #define NETLINK_IP6_FW		13
 #define NETLINK_DNRTMSG		14	/* DECnet routing messages */
 #define NETLINK_KOBJECT_UEVENT	15	/* Kernel messages to userspace */
+#define NETLINK_GENERIC		16
 
 #define MAX_LINKS 32		
 

include/linux/pci_ids.h

@@ -1355,7 +1355,7 @@
 #define PCI_DEVICE_ID_RME_DIGI96	0x3fc0
 #define PCI_DEVICE_ID_RME_DIGI96_8	0x3fc1
 #define PCI_DEVICE_ID_RME_DIGI96_8_PRO	0x3fc2
-#define PCI_DEVICE_IDRME__DIGI96_8_PAD_OR_PST 0x3fc3
+#define PCI_DEVICE_ID_RME_DIGI96_8_PAD_OR_PST 0x3fc3
 #define PCI_DEVICE_ID_XILINX_HAMMERFALL	0x3fc4
 #define PCI_DEVICE_ID_XILINX_HAMMERFALL_DSP 0x3fc5
 #define PCI_DEVICE_ID_XILINX_HAMMERFALL_DSP_MADI 0x3fc6

include/net/ip_vs.h

@@ -84,6 +84,7 @@
 #define IP_VS_CONN_F_IN_SEQ	0x0400		/* must do input seq adjust */
 #define IP_VS_CONN_F_SEQ_MASK	0x0600		/* in/out sequence mask */
 #define IP_VS_CONN_F_NO_CPORT	0x0800		/* no client port set yet */
+#define IP_VS_CONN_F_TEMPLATE	0x1000		/* template, not connection */
 
 /* Move it to better place one day, for now keep it unique */
 #define NFC_IPVS_PROPERTY	0x10000
@@ -739,6 +740,8 @@ enum {
 
 extern struct ip_vs_conn *ip_vs_conn_in_get
 (int protocol, __u32 s_addr, __u16 s_port, __u32 d_addr, __u16 d_port);
+extern struct ip_vs_conn *ip_vs_ct_in_get
+(int protocol, __u32 s_addr, __u16 s_port, __u32 d_addr, __u16 d_port);
 extern struct ip_vs_conn *ip_vs_conn_out_get
 (int protocol, __u32 s_addr, __u16 s_port, __u32 d_addr, __u16 d_port);
 

lib/dec_and_lock.c

@@ -1,7 +1,41 @@
 #include <linux/module.h>
 #include <linux/spinlock.h>
 #include <asm/atomic.h>
+#include <asm/system.h>
 
+#ifdef __HAVE_ARCH_CMPXCHG
+/*
+ * This is an implementation of the notion of "decrement a
+ * reference count, and return locked if it decremented to zero".
+ *
+ * This implementation can be used on any architecture that
+ * has a cmpxchg, and where atomic->value is an int holding
+ * the value of the atomic (i.e. the high bits aren't used
+ * for a lock or anything like that).
+ */
+int _atomic_dec_and_lock(atomic_t *atomic, spinlock_t *lock)
+{
+	int counter;
+	int newcount;
+
+	for (;;) {
+		counter = atomic_read(atomic);
+		newcount = counter - 1;
+		if (!newcount)
+			break;		/* do it the slow way */
+
+		newcount = cmpxchg(&atomic->counter, counter, newcount);
+		if (newcount == counter)
+			return 0;
+	}
+
+	spin_lock(lock);
+	if (atomic_dec_and_test(atomic))
+		return 1;
+	spin_unlock(lock);
+	return 0;
+}
+#else
 /*
  * This is an architecture-neutral, but slow,
  * implementation of the notion of "decrement
@@ -33,5 +67,6 @@ int _atomic_dec_and_lock(atomic_t *atomic, spinlock_t *lock)
 	spin_unlock(lock);
 	return 0;
 }
+#endif
 
 EXPORT_SYMBOL(_atomic_dec_and_lock);

mm/mmap.c

@@ -1993,6 +1993,9 @@ int insert_vm_struct(struct mm_struct * mm, struct vm_area_struct * vma)
 	__vma = find_vma_prepare(mm,vma->vm_start,&prev,&rb_link,&rb_parent);
 	if (__vma && __vma->vm_start < vma->vm_end)
 		return -ENOMEM;
+	if ((vma->vm_flags & VM_ACCOUNT) &&
+	     security_vm_enough_memory(vma_pages(vma)))
+		return -ENOMEM;
 	vma_link(mm, vma, prev, rb_link, rb_parent);
 	return 0;
 }

mm/slab.c

@@ -659,7 +659,7 @@ static inline kmem_cache_t *__find_general_cachep(size_t size,
  	* kmem_cache_create(), or __kmalloc(), before
  	* the generic caches are initialized.
  	*/
-	BUG_ON(csizep->cs_cachep == NULL);
+	BUG_ON(malloc_sizes[INDEX_AC].cs_cachep == NULL);
 #endif
 	while (size > csizep->cs_size)
 		csizep++;

net/bridge/br_netfilter.c

@@ -214,9 +214,11 @@ static int br_nf_pre_routing_finish(struct sk_buff *skb)
 				     .tos = RT_TOS(iph->tos)} }, .proto = 0};
 
 			if (!ip_route_output_key(&rt, &fl)) {
-				/* Bridged-and-DNAT'ed traffic doesn't
-				 * require ip_forwarding. */
-				if (((struct dst_entry *)rt)->dev == dev) {
+				/* - Bridged-and-DNAT'ed traffic doesn't
+				 *   require ip_forwarding.
+				 * - Deal with redirected traffic. */
+				if (((struct dst_entry *)rt)->dev == dev ||
+				    rt->rt_type == RTN_LOCAL) {
 					skb->dst = (struct dst_entry *)rt;
 					goto bridged_dnat;
 				}

net/ipv4/igmp.c

@@ -1603,7 +1603,7 @@ static void ip_mc_clear_src(struct ip_mc_list *pmc)
 	}
 	pmc->sources = NULL;
 	pmc->sfmode = MCAST_EXCLUDE;
-	pmc->sfcount[MCAST_EXCLUDE] = 0;
+	pmc->sfcount[MCAST_INCLUDE] = 0;
 	pmc->sfcount[MCAST_EXCLUDE] = 1;
 }
 

net/ipv4/ipvs/ip_vs_conn.c

@@ -196,6 +196,7 @@ static inline struct ip_vs_conn *__ip_vs_conn_in_get
 	list_for_each_entry(cp, &ip_vs_conn_tab[hash], c_list) {
 		if (s_addr==cp->caddr && s_port==cp->cport &&
 		    d_port==cp->vport && d_addr==cp->vaddr &&
+		    ((!s_port) ^ (!(cp->flags & IP_VS_CONN_F_NO_CPORT))) &&
 		    protocol==cp->protocol) {
 			/* HIT */
 			atomic_inc(&cp->refcnt);
@@ -227,6 +228,40 @@ struct ip_vs_conn *ip_vs_conn_in_get
 	return cp;
 }
 
+/* Get reference to connection template */
+struct ip_vs_conn *ip_vs_ct_in_get
+(int protocol, __u32 s_addr, __u16 s_port, __u32 d_addr, __u16 d_port)
+{
+	unsigned hash;
+	struct ip_vs_conn *cp;
+
+	hash = ip_vs_conn_hashkey(protocol, s_addr, s_port);
+
+	ct_read_lock(hash);
+
+	list_for_each_entry(cp, &ip_vs_conn_tab[hash], c_list) {
+		if (s_addr==cp->caddr && s_port==cp->cport &&
+		    d_port==cp->vport && d_addr==cp->vaddr &&
+		    cp->flags & IP_VS_CONN_F_TEMPLATE &&
+		    protocol==cp->protocol) {
+			/* HIT */
+			atomic_inc(&cp->refcnt);
+			goto out;
+		}
+	}
+	cp = NULL;
+
+  out:
+	ct_read_unlock(hash);
+
+	IP_VS_DBG(7, "template lookup/in %s %u.%u.%u.%u:%d->%u.%u.%u.%u:%d %s\n",
+		  ip_vs_proto_name(protocol),
+		  NIPQUAD(s_addr), ntohs(s_port),
+		  NIPQUAD(d_addr), ntohs(d_port),
+		  cp?"hit":"not hit");
+
+	return cp;
+}
 
 /*
  *  Gets ip_vs_conn associated with supplied parameters in the ip_vs_conn_tab.
@@ -367,7 +402,7 @@ ip_vs_bind_dest(struct ip_vs_conn *cp, struct ip_vs_dest *dest)
 		  atomic_read(&dest->refcnt));
 
 	/* Update the connection counters */
-	if (cp->cport || (cp->flags & IP_VS_CONN_F_NO_CPORT)) {
+	if (!(cp->flags & IP_VS_CONN_F_TEMPLATE)) {
 		/* It is a normal connection, so increase the inactive
 		   connection counter because it is in TCP SYNRECV
 		   state (inactive) or other protocol inacive state */
@@ -406,7 +441,7 @@ static inline void ip_vs_unbind_dest(struct ip_vs_conn *cp)
 		  atomic_read(&dest->refcnt));
 
 	/* Update the connection counters */
-	if (cp->cport || (cp->flags & IP_VS_CONN_F_NO_CPORT)) {
+	if (!(cp->flags & IP_VS_CONN_F_TEMPLATE)) {
 		/* It is a normal connection, so decrease the inactconns
 		   or activeconns counter */
 		if (cp->flags & IP_VS_CONN_F_INACTIVE) {
@@ -467,7 +502,7 @@ int ip_vs_check_template(struct ip_vs_conn *ct)
 		/*
 		 * Invalidate the connection template
 		 */
-		if (ct->cport) {
+		if (ct->vport != 65535) {
 			if (ip_vs_conn_unhash(ct)) {
 				ct->dport = 65535;
 				ct->vport = 65535;
@@ -776,7 +811,7 @@ void ip_vs_random_dropentry(void)
 		ct_write_lock_bh(hash);
 
 		list_for_each_entry(cp, &ip_vs_conn_tab[hash], c_list) {
-			if (!cp->cport && !(cp->flags & IP_VS_CONN_F_NO_CPORT))
+			if (cp->flags & IP_VS_CONN_F_TEMPLATE)
 				/* connection template */
 				continue;
 

net/ipv4/ipvs/ip_vs_core.c

@@ -243,10 +243,10 @@ ip_vs_sched_persist(struct ip_vs_service *svc,
 	if (ports[1] == svc->port) {
 		/* Check if a template already exists */
 		if (svc->port != FTPPORT)
-			ct = ip_vs_conn_in_get(iph->protocol, snet, 0,
+			ct = ip_vs_ct_in_get(iph->protocol, snet, 0,
 					       iph->daddr, ports[1]);
 		else
-			ct = ip_vs_conn_in_get(iph->protocol, snet, 0,
+			ct = ip_vs_ct_in_get(iph->protocol, snet, 0,
 					       iph->daddr, 0);
 
 		if (!ct || !ip_vs_check_template(ct)) {
@@ -272,14 +272,14 @@ ip_vs_sched_persist(struct ip_vs_service *svc,
 						    iph->daddr,
 						    ports[1],
 						    dest->addr, dest->port,
-						    0,
+						    IP_VS_CONN_F_TEMPLATE,
 						    dest);
 			else
 				ct = ip_vs_conn_new(iph->protocol,
 						    snet, 0,
 						    iph->daddr, 0,
 						    dest->addr, 0,
-						    0,
+						    IP_VS_CONN_F_TEMPLATE,
 						    dest);
 			if (ct == NULL)
 				return NULL;
@@ -298,10 +298,10 @@ ip_vs_sched_persist(struct ip_vs_service *svc,
 		 * port zero template: <protocol,caddr,0,vaddr,0,daddr,0>
 		 */
 		if (svc->fwmark)
-			ct = ip_vs_conn_in_get(IPPROTO_IP, snet, 0,
+			ct = ip_vs_ct_in_get(IPPROTO_IP, snet, 0,
 					       htonl(svc->fwmark), 0);
 		else
-			ct = ip_vs_conn_in_get(iph->protocol, snet, 0,
+			ct = ip_vs_ct_in_get(iph->protocol, snet, 0,
 					       iph->daddr, 0);
 
 		if (!ct || !ip_vs_check_template(ct)) {
@@ -326,14 +326,14 @@ ip_vs_sched_persist(struct ip_vs_service *svc,
 						    snet, 0,
 						    htonl(svc->fwmark), 0,
 						    dest->addr, 0,
-						    0,
+						    IP_VS_CONN_F_TEMPLATE,
 						    dest);
 			else
 				ct = ip_vs_conn_new(iph->protocol,
 						    snet, 0,
 						    iph->daddr, 0,
 						    dest->addr, 0,
-						    0,
+						    IP_VS_CONN_F_TEMPLATE,
 						    dest);
 			if (ct == NULL)
 				return NULL;

net/ipv4/ipvs/ip_vs_sync.c

@@ -297,16 +297,24 @@ static void ip_vs_process_message(const char *buffer, const size_t buflen)
 
 	p = (char *)buffer + sizeof(struct ip_vs_sync_mesg);
 	for (i=0; i<m->nr_conns; i++) {
+		unsigned flags;
+
 		s = (struct ip_vs_sync_conn *)p;
-		cp = ip_vs_conn_in_get(s->protocol,
-				       s->caddr, s->cport,
-				       s->vaddr, s->vport);
+		flags = ntohs(s->flags);
+		if (!(flags & IP_VS_CONN_F_TEMPLATE))
+			cp = ip_vs_conn_in_get(s->protocol,
+					       s->caddr, s->cport,
+					       s->vaddr, s->vport);
+		else
+			cp = ip_vs_ct_in_get(s->protocol,
+					       s->caddr, s->cport,
+					       s->vaddr, s->vport);
 		if (!cp) {
 			cp = ip_vs_conn_new(s->protocol,
 					    s->caddr, s->cport,
 					    s->vaddr, s->vport,
 					    s->daddr, s->dport,
-					    ntohs(s->flags), NULL);
+					    flags, NULL);
 			if (!cp) {
 				IP_VS_ERR("ip_vs_conn_new failed\n");
 				return;
@@ -315,11 +323,11 @@ static void ip_vs_process_message(const char *buffer, const size_t buflen)
 		} else if (!cp->dest) {
 			/* it is an entry created by the synchronization */
 			cp->state = ntohs(s->state);
-			cp->flags = ntohs(s->flags) | IP_VS_CONN_F_HASHED;
+			cp->flags = flags | IP_VS_CONN_F_HASHED;
 		}	/* Note that we don't touch its state and flags
 			   if it is a normal entry. */
 
-		if (ntohs(s->flags) & IP_VS_CONN_F_SEQ_MASK) {
+		if (flags & IP_VS_CONN_F_SEQ_MASK) {
 			opt = (struct ip_vs_sync_conn_options *)&s[1];
 			memcpy(&cp->in_seq, opt, sizeof(*opt));
 			p += FULL_CONN_SIZE;

net/ipv4/tcp_input.c

@@ -979,14 +979,19 @@ tcp_sacktag_write_queue(struct sock *sk, struct sk_buff *ack_skb, u32 prior_snd_
 			if (!before(TCP_SKB_CB(skb)->seq, end_seq))
 				break;
 
+			in_sack = !after(start_seq, TCP_SKB_CB(skb)->seq) &&
+				!before(end_seq, TCP_SKB_CB(skb)->end_seq);
+
 			pcount = tcp_skb_pcount(skb);
 
-			if (pcount > 1 &&
-			    (after(start_seq, TCP_SKB_CB(skb)->seq) ||
-			     before(end_seq, TCP_SKB_CB(skb)->end_seq))) {
+			if (pcount > 1 && !in_sack &&
+			    after(TCP_SKB_CB(skb)->end_seq, start_seq)) {
 				unsigned int pkt_len;
 
-				if (after(start_seq, TCP_SKB_CB(skb)->seq))
+				in_sack = !after(start_seq,
+						 TCP_SKB_CB(skb)->seq);
+
+				if (!in_sack)
 					pkt_len = (start_seq -
 						   TCP_SKB_CB(skb)->seq);
 				else
@@ -999,9 +1004,6 @@ tcp_sacktag_write_queue(struct sock *sk, struct sk_buff *ack_skb, u32 prior_snd_
 
 			fack_count += pcount;
 
-			in_sack = !after(start_seq, TCP_SKB_CB(skb)->seq) &&
-				!before(end_seq, TCP_SKB_CB(skb)->end_seq);
-
 			sacked = TCP_SKB_CB(skb)->sacked;
 
 			/* Account D-SACK for retransmitted packet. */

net/ipv4/tcp_output.c

@@ -435,6 +435,8 @@ int tcp_fragment(struct sock *sk, struct sk_buff *skb, u32 len, unsigned int mss
 	int nsize, old_factor;
 	u16 flags;
 
+	BUG_ON(len >= skb->len);
+
 	nsize = skb_headlen(skb) - len;
 	if (nsize < 0)
 		nsize = 0;

net/ipv6/mcast.c

@@ -1968,7 +1968,7 @@ static void ip6_mc_clear_src(struct ifmcaddr6 *pmc)
 	}
 	pmc->mca_sources = NULL;
 	pmc->mca_sfmode = MCAST_EXCLUDE;
-	pmc->mca_sfcount[MCAST_EXCLUDE] = 0;
+	pmc->mca_sfcount[MCAST_INCLUDE] = 0;
 	pmc->mca_sfcount[MCAST_EXCLUDE] = 1;
 }
 

net/ipv6/udp.c

@@ -405,9 +405,8 @@ static struct sock *udp_v6_mcast_next(struct sock *sk,
 				continue;
 
 			if (!ipv6_addr_any(&np->rcv_saddr)) {
-				if (ipv6_addr_equal(&np->rcv_saddr, loc_addr))
-					return s;
-				continue;
+				if (!ipv6_addr_equal(&np->rcv_saddr, loc_addr))
+					continue;
 			}
 			if(!inet6_mc_check(s, loc_addr, rmt_addr))
 				continue;

sound/pci/rme32.c

@@ -228,11 +228,11 @@ typedef struct snd_rme32 {
 } rme32_t;
 
 static struct pci_device_id snd_rme32_ids[] = {
-	{PCI_VENDOR_ID_XILINX_RME, PCI_DEVICE_ID_DIGI32,
+	{PCI_VENDOR_ID_XILINX_RME, PCI_DEVICE_ID_RME_DIGI32,
 	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0,},
-	{PCI_VENDOR_ID_XILINX_RME, PCI_DEVICE_ID_DIGI32_8,
+	{PCI_VENDOR_ID_XILINX_RME, PCI_DEVICE_ID_RME_DIGI32_8,
 	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0,},
-	{PCI_VENDOR_ID_XILINX_RME, PCI_DEVICE_ID_DIGI32_PRO,
+	{PCI_VENDOR_ID_XILINX_RME, PCI_DEVICE_ID_RME_DIGI32_PRO,
 	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0,},
 	{0,}
 };
@@ -240,7 +240,7 @@ static struct pci_device_id snd_rme32_ids[] = {
 MODULE_DEVICE_TABLE(pci, snd_rme32_ids);
 
 #define RME32_ISWORKING(rme32) ((rme32)->wcreg & RME32_WCR_START)
-#define RME32_PRO_WITH_8414(rme32) ((rme32)->pci->device == PCI_DEVICE_ID_DIGI32_PRO && (rme32)->rev == RME32_PRO_REVISION_WITH_8414)
+#define RME32_PRO_WITH_8414(rme32) ((rme32)->pci->device == PCI_DEVICE_ID_RME_DIGI32_PRO && (rme32)->rev == RME32_PRO_REVISION_WITH_8414)
 
 static int snd_rme32_playback_prepare(snd_pcm_substream_t * substream);
 
@@ -527,21 +527,21 @@ static int snd_rme32_playback_setrate(rme32_t * rme32, int rate)
 			RME32_WCR_FREQ_1;
 		break;
 	case 64000:
-		if (rme32->pci->device != PCI_DEVICE_ID_DIGI32_PRO)
+		if (rme32->pci->device != PCI_DEVICE_ID_RME_DIGI32_PRO)
 			return -EINVAL;
 		rme32->wcreg |= RME32_WCR_DS_BM;
 		rme32->wcreg = (rme32->wcreg | RME32_WCR_FREQ_0) & 
 			~RME32_WCR_FREQ_1;
 		break;
 	case 88200:
-		if (rme32->pci->device != PCI_DEVICE_ID_DIGI32_PRO)
+		if (rme32->pci->device != PCI_DEVICE_ID_RME_DIGI32_PRO)
 			return -EINVAL;
 		rme32->wcreg |= RME32_WCR_DS_BM;
 		rme32->wcreg = (rme32->wcreg | RME32_WCR_FREQ_1) & 
 			~RME32_WCR_FREQ_0;
 		break;
 	case 96000:
-		if (rme32->pci->device != PCI_DEVICE_ID_DIGI32_PRO)
+		if (rme32->pci->device != PCI_DEVICE_ID_RME_DIGI32_PRO)
 			return -EINVAL;
 		rme32->wcreg |= RME32_WCR_DS_BM;
 		rme32->wcreg = (rme32->wcreg | RME32_WCR_FREQ_0) | 
@@ -881,7 +881,7 @@ static int snd_rme32_playback_spdif_open(snd_pcm_substream_t * substream)
 		runtime->hw = snd_rme32_spdif_fd_info;
 	else
 		runtime->hw = snd_rme32_spdif_info;
-	if (rme32->pci->device == PCI_DEVICE_ID_DIGI32_PRO) {
+	if (rme32->pci->device == PCI_DEVICE_ID_RME_DIGI32_PRO) {
 		runtime->hw.rates |= SNDRV_PCM_RATE_64000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000;
 		runtime->hw.rate_max = 96000;
 	}
@@ -1408,8 +1408,8 @@ static int __devinit snd_rme32_create(rme32_t * rme32)
 	}
 
 	/* set up ALSA pcm device for ADAT */
-	if ((pci->device == PCI_DEVICE_ID_DIGI32) ||
-	    (pci->device == PCI_DEVICE_ID_DIGI32_PRO)) {
+	if ((pci->device == PCI_DEVICE_ID_RME_DIGI32) ||
+	    (pci->device == PCI_DEVICE_ID_RME_DIGI32_PRO)) {
 		/* ADAT is not available on DIGI32 and DIGI32 Pro */
 		rme32->adat_pcm = NULL;
 	}
@@ -1639,11 +1639,11 @@ snd_rme32_info_inputtype_control(snd_kcontrol_t * kcontrol,
 	uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
 	uinfo->count = 1;
 	switch (rme32->pci->device) {
-	case PCI_DEVICE_ID_DIGI32:
-	case PCI_DEVICE_ID_DIGI32_8:
+	case PCI_DEVICE_ID_RME_DIGI32:
+	case PCI_DEVICE_ID_RME_DIGI32_8:
 		uinfo->value.enumerated.items = 3;
 		break;
-	case PCI_DEVICE_ID_DIGI32_PRO:
+	case PCI_DEVICE_ID_RME_DIGI32_PRO:
 		uinfo->value.enumerated.items = 4;
 		break;
 	default:
@@ -1670,11 +1670,11 @@ snd_rme32_get_inputtype_control(snd_kcontrol_t * kcontrol,
 	ucontrol->value.enumerated.item[0] = snd_rme32_getinputtype(rme32);
 
 	switch (rme32->pci->device) {
-	case PCI_DEVICE_ID_DIGI32:
-	case PCI_DEVICE_ID_DIGI32_8:
+	case PCI_DEVICE_ID_RME_DIGI32:
+	case PCI_DEVICE_ID_RME_DIGI32_8:
 		items = 3;
 		break;
-	case PCI_DEVICE_ID_DIGI32_PRO:
+	case PCI_DEVICE_ID_RME_DIGI32_PRO:
 		items = 4;
 		break;
 	default:
@@ -1697,11 +1697,11 @@ snd_rme32_put_inputtype_control(snd_kcontrol_t * kcontrol,
 	int change, items = 3;
 
 	switch (rme32->pci->device) {
-	case PCI_DEVICE_ID_DIGI32:
-	case PCI_DEVICE_ID_DIGI32_8:
+	case PCI_DEVICE_ID_RME_DIGI32:
+	case PCI_DEVICE_ID_RME_DIGI32_8:
 		items = 3;
 		break;
-	case PCI_DEVICE_ID_DIGI32_PRO:
+	case PCI_DEVICE_ID_RME_DIGI32_PRO:
 		items = 4;
 		break;
 	default:
@@ -1982,13 +1982,13 @@ snd_rme32_probe(struct pci_dev *pci, const struct pci_device_id *pci_id)
 
 	strcpy(card->driver, "Digi32");
 	switch (rme32->pci->device) {
-	case PCI_DEVICE_ID_DIGI32:
+	case PCI_DEVICE_ID_RME_DIGI32:
 		strcpy(card->shortname, "RME Digi32");
 		break;
-	case PCI_DEVICE_ID_DIGI32_8:
+	case PCI_DEVICE_ID_RME_DIGI32_8:
 		strcpy(card->shortname, "RME Digi32/8");
 		break;
-	case PCI_DEVICE_ID_DIGI32_PRO:
+	case PCI_DEVICE_ID_RME_DIGI32_PRO:
 		strcpy(card->shortname, "RME Digi32 PRO");
 		break;
 	}

sound/pci/rme96.c

@@ -233,13 +233,13 @@ typedef struct snd_rme96 {
 } rme96_t;
 
 static struct pci_device_id snd_rme96_ids[] = {
-	{ PCI_VENDOR_ID_XILINX, PCI_DEVICE_ID_DIGI96,
+	{ PCI_VENDOR_ID_XILINX, PCI_DEVICE_ID_RME_DIGI96,
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
-	{ PCI_VENDOR_ID_XILINX, PCI_DEVICE_ID_DIGI96_8,
+	{ PCI_VENDOR_ID_XILINX, PCI_DEVICE_ID_RME_DIGI96_8,
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
-	{ PCI_VENDOR_ID_XILINX, PCI_DEVICE_ID_DIGI96_8_PRO,
+	{ PCI_VENDOR_ID_XILINX, PCI_DEVICE_ID_RME_DIGI96_8_PRO,
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
-	{ PCI_VENDOR_ID_XILINX, PCI_DEVICE_ID_DIGI96_8_PAD_OR_PST,
+	{ PCI_VENDOR_ID_XILINX, PCI_DEVICE_ID_RME_DIGI96_8_PAD_OR_PST,
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, 
 	{ 0, }
 };
@@ -248,12 +248,12 @@ MODULE_DEVICE_TABLE(pci, snd_rme96_ids);
 
 #define RME96_ISPLAYING(rme96) ((rme96)->wcreg & RME96_WCR_START)
 #define RME96_ISRECORDING(rme96) ((rme96)->wcreg & RME96_WCR_START_2)
-#define	RME96_HAS_ANALOG_IN(rme96) ((rme96)->pci->device == PCI_DEVICE_ID_DIGI96_8_PAD_OR_PST)
-#define	RME96_HAS_ANALOG_OUT(rme96) ((rme96)->pci->device == PCI_DEVICE_ID_DIGI96_8_PRO || \
-				     (rme96)->pci->device == PCI_DEVICE_ID_DIGI96_8_PAD_OR_PST)
+#define	RME96_HAS_ANALOG_IN(rme96) ((rme96)->pci->device == PCI_DEVICE_ID_RME_DIGI96_8_PAD_OR_PST)
+#define	RME96_HAS_ANALOG_OUT(rme96) ((rme96)->pci->device == PCI_DEVICE_ID_RME_DIGI96_8_PRO || \
+				     (rme96)->pci->device == PCI_DEVICE_ID_RME_DIGI96_8_PAD_OR_PST)
 #define	RME96_DAC_IS_1852(rme96) (RME96_HAS_ANALOG_OUT(rme96) && (rme96)->rev >= 4)
-#define	RME96_DAC_IS_1855(rme96) (((rme96)->pci->device == PCI_DEVICE_ID_DIGI96_8_PAD_OR_PST && (rme96)->rev < 4) || \
-			          ((rme96)->pci->device == PCI_DEVICE_ID_DIGI96_8_PRO && (rme96)->rev == 2))
+#define	RME96_DAC_IS_1855(rme96) (((rme96)->pci->device == PCI_DEVICE_ID_RME_DIGI96_8_PAD_OR_PST && (rme96)->rev < 4) || \
+			          ((rme96)->pci->device == PCI_DEVICE_ID_RME_DIGI96_8_PRO && (rme96)->rev == 2))
 #define	RME96_185X_MAX_OUT(rme96) ((1 << (RME96_DAC_IS_1852(rme96) ? RME96_AD1852_VOL_BITS : RME96_AD1855_VOL_BITS)) - 1)
 
 static int
@@ -830,9 +830,9 @@ snd_rme96_setinputtype(rme96_t *rme96,
 			RME96_WCR_INP_1;
 		break;
 	case RME96_INPUT_XLR:
-		if ((rme96->pci->device != PCI_DEVICE_ID_DIGI96_8_PAD_OR_PST &&
-		     rme96->pci->device != PCI_DEVICE_ID_DIGI96_8_PRO) ||
-		    (rme96->pci->device == PCI_DEVICE_ID_DIGI96_8_PAD_OR_PST &&
+		if ((rme96->pci->device != PCI_DEVICE_ID_RME_DIGI96_8_PAD_OR_PST &&
+		     rme96->pci->device != PCI_DEVICE_ID_RME_DIGI96_8_PRO) ||
+		    (rme96->pci->device == PCI_DEVICE_ID_RME_DIGI96_8_PAD_OR_PST &&
 		     rme96->rev > 4))
 		{
 			/* Only Digi96/8 PRO and Digi96/8 PAD supports XLR */
@@ -1598,7 +1598,7 @@ snd_rme96_create(rme96_t *rme96)
 	rme96->spdif_pcm->info_flags = 0;
 
 	/* set up ALSA pcm device for ADAT */
-	if (pci->device == PCI_DEVICE_ID_DIGI96) {
+	if (pci->device == PCI_DEVICE_ID_RME_DIGI96) {
 		/* ADAT is not available on the base model */
 		rme96->adat_pcm = NULL;
 	} else {
@@ -1858,14 +1858,14 @@ snd_rme96_info_inputtype_control(snd_kcontrol_t *kcontrol, snd_ctl_elem_info_t *
 	uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
 	uinfo->count = 1;
 	switch (rme96->pci->device) {
-	case PCI_DEVICE_ID_DIGI96:
-	case PCI_DEVICE_ID_DIGI96_8:
+	case PCI_DEVICE_ID_RME_DIGI96:
+	case PCI_DEVICE_ID_RME_DIGI96_8:
 		uinfo->value.enumerated.items = 3;
 		break;
-	case PCI_DEVICE_ID_DIGI96_8_PRO:
+	case PCI_DEVICE_ID_RME_DIGI96_8_PRO:
 		uinfo->value.enumerated.items = 4;
 		break;
-	case PCI_DEVICE_ID_DIGI96_8_PAD_OR_PST:
+	case PCI_DEVICE_ID_RME_DIGI96_8_PAD_OR_PST:
 		if (rme96->rev > 4) {
 			/* PST */
 			uinfo->value.enumerated.items = 4;
@@ -1895,14 +1895,14 @@ snd_rme96_get_inputtype_control(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_t
 	ucontrol->value.enumerated.item[0] = snd_rme96_getinputtype(rme96);
 	
 	switch (rme96->pci->device) {
-	case PCI_DEVICE_ID_DIGI96:
-	case PCI_DEVICE_ID_DIGI96_8:
+	case PCI_DEVICE_ID_RME_DIGI96:
+	case PCI_DEVICE_ID_RME_DIGI96_8:
 		items = 3;
 		break;
-	case PCI_DEVICE_ID_DIGI96_8_PRO:
+	case PCI_DEVICE_ID_RME_DIGI96_8_PRO:
 		items = 4;
 		break;
-	case PCI_DEVICE_ID_DIGI96_8_PAD_OR_PST:
+	case PCI_DEVICE_ID_RME_DIGI96_8_PAD_OR_PST:
 		if (rme96->rev > 4) {
 			/* for handling PST case, (INPUT_ANALOG is moved to INPUT_XLR */
 			if (ucontrol->value.enumerated.item[0] == RME96_INPUT_ANALOG) {
@@ -1932,14 +1932,14 @@ snd_rme96_put_inputtype_control(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_t
 	int change, items = 3;
 	
 	switch (rme96->pci->device) {
-	case PCI_DEVICE_ID_DIGI96:
-	case PCI_DEVICE_ID_DIGI96_8:
+	case PCI_DEVICE_ID_RME_DIGI96:
+	case PCI_DEVICE_ID_RME_DIGI96_8:
 		items = 3;
 		break;
-	case PCI_DEVICE_ID_DIGI96_8_PRO:
+	case PCI_DEVICE_ID_RME_DIGI96_8_PRO:
 		items = 4;
 		break;
-	case PCI_DEVICE_ID_DIGI96_8_PAD_OR_PST:
+	case PCI_DEVICE_ID_RME_DIGI96_8_PAD_OR_PST:
 		if (rme96->rev > 4) {
 			items = 4;
 		} else {
@@ -1953,7 +1953,7 @@ snd_rme96_put_inputtype_control(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_t
 	val = ucontrol->value.enumerated.item[0] % items;
 	
 	/* special case for PST */
-	if (rme96->pci->device == PCI_DEVICE_ID_DIGI96_8_PAD_OR_PST && rme96->rev > 4) {
+	if (rme96->pci->device == PCI_DEVICE_ID_RME_DIGI96_8_PAD_OR_PST && rme96->rev > 4) {
 		if (val == RME96_INPUT_XLR) {
 			val = RME96_INPUT_ANALOG;
 		}
@@ -2375,16 +2375,16 @@ snd_rme96_probe(struct pci_dev *pci,
 	
 	strcpy(card->driver, "Digi96");
 	switch (rme96->pci->device) {
-	case PCI_DEVICE_ID_DIGI96:
+	case PCI_DEVICE_ID_RME_DIGI96:
 		strcpy(card->shortname, "RME Digi96");
 		break;
-	case PCI_DEVICE_ID_DIGI96_8:
+	case PCI_DEVICE_ID_RME_DIGI96_8:
 		strcpy(card->shortname, "RME Digi96/8");
 		break;
-	case PCI_DEVICE_ID_DIGI96_8_PRO:
+	case PCI_DEVICE_ID_RME_DIGI96_8_PRO:
 		strcpy(card->shortname, "RME Digi96/8 PRO");
 		break;
-	case PCI_DEVICE_ID_DIGI96_8_PAD_OR_PST:
+	case PCI_DEVICE_ID_RME_DIGI96_8_PAD_OR_PST:
 		pci_read_config_byte(rme96->pci, 8, &val);
 		if (val < 5) {
 			strcpy(card->shortname, "RME Digi96/8 PAD");