浏览代码

powerpc/device-tree: Document MTD nodes with multiple "reg" tuples

Add binding for mtd nodes with multiple reg tuples.  Multiple reg tuples
are used when the flash region covers multiple devices of the same type,
but not necessarily the same size.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Stefan Roese 16 年之前
父节点
当前提交
c5a88dd90c
共有 1 个文件被更改,包括 18 次插入1 次删除
  1. 18 1
      Documentation/powerpc/dts-bindings/mtd-physmap.txt

+ 18 - 1
Documentation/powerpc/dts-bindings/mtd-physmap.txt

@@ -5,7 +5,9 @@ file systems on embedded devices.
 
  - compatible : should contain the specific model of flash chip(s)
    used, if known, followed by either "cfi-flash" or "jedec-flash"
- - reg : Address range of the flash chip
+ - reg : Address range(s) of the flash chip(s)
+   It's possible to (optionally) define multiple "reg" tuples so that
+   non-identical NOR chips can be described in one flash node.
  - bank-width : Width (in bytes) of the flash bank.  Equal to the
    device width times the number of interleaved chips.
  - device-width : (optional) Width of a single flash chip.  If
@@ -61,3 +63,18 @@ Example:
 			read-only;
 		};
 	};
+
+Here an example with multiple "reg" tuples:
+
+	flash@f0000000,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "intel,PC48F4400P0VB", "cfi-flash";
+		reg = <0 0x00000000 0x02000000
+		       0 0x02000000 0x02000000>;
+		bank-width = <2>;
+		partition@0 {
+			label = "test-part1";
+			reg = <0 0x04000000>;
+		};
+	};