Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next

drivers/net/wireless/at76c50x-usb.c

@@ -1122,12 +1122,12 @@ exit:
 static void at76_dump_mib_local(struct at76_priv *priv)
 {
 	int ret;
-	struct mib_local *m = kmalloc(sizeof(struct mib_phy), GFP_KERNEL);
+	struct mib_local *m = kmalloc(sizeof(*m), GFP_KERNEL);
 
 	if (!m)
 		return;
 
-	ret = at76_get_mib(priv->udev, MIB_LOCAL, m, sizeof(struct mib_local));
+	ret = at76_get_mib(priv->udev, MIB_LOCAL, m, sizeof(*m));
 	if (ret < 0) {
 		wiphy_err(priv->hw->wiphy,
 			  "at76_get_mib (LOCAL) failed: %d\n", ret);

drivers/net/wireless/brcm80211/Kconfig

@@ -36,6 +36,15 @@ config BRCMFMAC_SDIO
 	  IEEE802.11n embedded FullMAC WLAN driver. Say Y if you want to
 	  use the driver for a SDIO wireless card.
 
+config BRCMFMAC_SDIO_OOB
+	bool "Out of band interrupt support for SDIO interface chipset"
+	depends on BRCMFMAC_SDIO
+	---help---
+	  This option enables out-of-band interrupt support for Broadcom
+	  SDIO Wifi chipset using fullmac in order to gain better
+	  performance and deep sleep wake up capability on certain
+	  platforms. Say N if you are unsure.
+
 config BRCMFMAC_USB
 	bool "USB bus interface support for FullMAC driver"
 	depends on USB

drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c

@@ -39,37 +39,113 @@
 
 #define SDIOH_API_ACCESS_RETRY_LIMIT	2
 
-static void brcmf_sdioh_irqhandler(struct sdio_func *func)
+#ifdef CONFIG_BRCMFMAC_SDIO_OOB
+static irqreturn_t brcmf_sdio_irqhandler(int irq, void *dev_id)
 {
-	struct brcmf_sdio_dev *sdiodev = dev_get_drvdata(&func->card->dev);
+	struct brcmf_sdio_dev *sdiodev = dev_get_drvdata(dev_id);
 
-	brcmf_dbg(TRACE, "***IRQHandler\n");
+	brcmf_dbg(INTR, "oob intr triggered\n");
 
-	sdio_release_host(func);
+	/*
+	 * out-of-band interrupt is level-triggered which won't
+	 * be cleared until dpc
+	 */
+	if (sdiodev->irq_en) {
+		disable_irq_nosync(irq);
+		sdiodev->irq_en = false;
+	}
 
 	brcmf_sdbrcm_isr(sdiodev->bus);
 
-	sdio_claim_host(func);
+	return IRQ_HANDLED;
+}
+
+int brcmf_sdio_intr_register(struct brcmf_sdio_dev *sdiodev)
+{
+	int ret = 0;
+	u8 data;
+	unsigned long flags;
+
+	brcmf_dbg(TRACE, "Entering\n");
+
+	brcmf_dbg(ERROR, "requesting irq %d\n", sdiodev->irq);
+	ret = request_irq(sdiodev->irq, brcmf_sdio_irqhandler,
+			  sdiodev->irq_flags, "brcmf_oob_intr",
+			  &sdiodev->func[1]->card->dev);
+	if (ret != 0)
+		return ret;
+	spin_lock_init(&sdiodev->irq_en_lock);
+	spin_lock_irqsave(&sdiodev->irq_en_lock, flags);
+	sdiodev->irq_en = true;
+	spin_unlock_irqrestore(&sdiodev->irq_en_lock, flags);
+
+	ret = enable_irq_wake(sdiodev->irq);
+	if (ret != 0)
+		return ret;
+	sdiodev->irq_wake = true;
+
+	/* must configure SDIO_CCCR_IENx to enable irq */
+	data = brcmf_sdcard_cfg_read(sdiodev, SDIO_FUNC_0,
+				     SDIO_CCCR_IENx, &ret);
+	data |= 1 << SDIO_FUNC_1 | 1 << SDIO_FUNC_2 | 1;
+	brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_0, SDIO_CCCR_IENx,
+			       data, &ret);
+
+	/* redirect, configure ane enable io for interrupt signal */
+	data = SDIO_SEPINT_MASK | SDIO_SEPINT_OE;
+	if (sdiodev->irq_flags | IRQF_TRIGGER_HIGH)
+		data |= SDIO_SEPINT_ACT_HI;
+	brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_0, SDIO_CCCR_BRCM_SEPINT,
+			       data, &ret);
+
+	return 0;
+}
+
+int brcmf_sdio_intr_unregister(struct brcmf_sdio_dev *sdiodev)
+{
+	brcmf_dbg(TRACE, "Entering\n");
+
+	brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_0, SDIO_CCCR_BRCM_SEPINT,
+			       0, NULL);
+	brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_0, SDIO_CCCR_IENx, 0, NULL);
+
+	if (sdiodev->irq_wake) {
+		disable_irq_wake(sdiodev->irq);
+		sdiodev->irq_wake = false;
+	}
+	free_irq(sdiodev->irq, &sdiodev->func[1]->card->dev);
+	sdiodev->irq_en = false;
+
+	return 0;
+}
+#else		/* CONFIG_BRCMFMAC_SDIO_OOB */
+static void brcmf_sdio_irqhandler(struct sdio_func *func)
+{
+	struct brcmf_sdio_dev *sdiodev = dev_get_drvdata(&func->card->dev);
+
+	brcmf_dbg(INTR, "ib intr triggered\n");
+
+	brcmf_sdbrcm_isr(sdiodev->bus);
 }
 
 /* dummy handler for SDIO function 2 interrupt */
-static void brcmf_sdioh_dummy_irq_handler(struct sdio_func *func)
+static void brcmf_sdio_dummy_irqhandler(struct sdio_func *func)
 {
 }
 
-int brcmf_sdcard_intr_reg(struct brcmf_sdio_dev *sdiodev)
+int brcmf_sdio_intr_register(struct brcmf_sdio_dev *sdiodev)
 {
 	brcmf_dbg(TRACE, "Entering\n");
 
 	sdio_claim_host(sdiodev->func[1]);
-	sdio_claim_irq(sdiodev->func[1], brcmf_sdioh_irqhandler);
-	sdio_claim_irq(sdiodev->func[2], brcmf_sdioh_dummy_irq_handler);
+	sdio_claim_irq(sdiodev->func[1], brcmf_sdio_irqhandler);
+	sdio_claim_irq(sdiodev->func[2], brcmf_sdio_dummy_irqhandler);
 	sdio_release_host(sdiodev->func[1]);
 
 	return 0;
 }
 
-int brcmf_sdcard_intr_dereg(struct brcmf_sdio_dev *sdiodev)
+int brcmf_sdio_intr_unregister(struct brcmf_sdio_dev *sdiodev)
 {
 	brcmf_dbg(TRACE, "Entering\n");
 
@@ -80,6 +156,7 @@ int brcmf_sdcard_intr_dereg(struct brcmf_sdio_dev *sdiodev)
 
 	return 0;
 }
+#endif		/* CONFIG_BRCMFMAC_SDIO_OOB */
 
 u8 brcmf_sdcard_cfg_read(struct brcmf_sdio_dev *sdiodev, uint fnc_num, u32 addr,
 			 int *err)

drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c

@@ -27,6 +27,7 @@
 #include <linux/errno.h>
 #include <linux/sched.h>	/* request_irq() */
 #include <linux/module.h>
+#include <linux/platform_device.h>
 #include <net/cfg80211.h>
 
 #include <defs.h>
@@ -55,6 +56,15 @@ static const struct sdio_device_id brcmf_sdmmc_ids[] = {
 };
 MODULE_DEVICE_TABLE(sdio, brcmf_sdmmc_ids);
 
+#ifdef CONFIG_BRCMFMAC_SDIO_OOB
+static struct list_head oobirq_lh;
+struct brcmf_sdio_oobirq {
+	unsigned int irq;
+	unsigned long flags;
+	struct list_head list;
+};
+#endif		/* CONFIG_BRCMFMAC_SDIO_OOB */
+
 static bool
 brcmf_pm_resume_error(struct brcmf_sdio_dev *sdiodev)
 {
@@ -107,7 +117,8 @@ static inline int brcmf_sdioh_f0_write_byte(struct brcmf_sdio_dev *sdiodev,
 			}
 			sdio_release_host(sdfunc);
 		}
-	} else if (regaddr == SDIO_CCCR_ABORT) {
+	} else if ((regaddr == SDIO_CCCR_ABORT) ||
+		   (regaddr == SDIO_CCCR_IENx)) {
 		sdfunc = kmemdup(sdiodev->func[0], sizeof(struct sdio_func),
 				 GFP_KERNEL);
 		if (!sdfunc)
@@ -467,12 +478,40 @@ void brcmf_sdioh_detach(struct brcmf_sdio_dev *sdiodev)
 
 }
 
+#ifdef CONFIG_BRCMFMAC_SDIO_OOB
+static int brcmf_sdio_getintrcfg(struct brcmf_sdio_dev *sdiodev)
+{
+	struct brcmf_sdio_oobirq *oobirq_entry;
+
+	if (list_empty(&oobirq_lh)) {
+		brcmf_dbg(ERROR, "no valid oob irq resource\n");
+		return -ENXIO;
+	}
+
+	oobirq_entry = list_first_entry(&oobirq_lh, struct brcmf_sdio_oobirq,
+					list);
+
+	sdiodev->irq = oobirq_entry->irq;
+	sdiodev->irq_flags = oobirq_entry->flags;
+	list_del(&oobirq_entry->list);
+	kfree(oobirq_entry);
+
+	return 0;
+}
+#else
+static inline int brcmf_sdio_getintrcfg(struct brcmf_sdio_dev *sdiodev)
+{
+	return 0;
+}
+#endif		/* CONFIG_BRCMFMAC_SDIO_OOB */
+
 static int brcmf_ops_sdio_probe(struct sdio_func *func,
 			      const struct sdio_device_id *id)
 {
 	int ret = 0;
 	struct brcmf_sdio_dev *sdiodev;
 	struct brcmf_bus *bus_if;
+
 	brcmf_dbg(TRACE, "Enter\n");
 	brcmf_dbg(TRACE, "func->class=%x\n", func->class);
 	brcmf_dbg(TRACE, "sdio_vendor: 0x%04x\n", func->vendor);
@@ -511,6 +550,10 @@ static int brcmf_ops_sdio_probe(struct sdio_func *func,
 		sdiodev = dev_get_drvdata(&func->card->dev);
 		if ((!sdiodev) || (sdiodev->func[1]->card != func->card))
 			return -ENODEV;
+
+		ret = brcmf_sdio_getintrcfg(sdiodev);
+		if (ret)
+			return ret;
 		sdiodev->func[2] = func;
 
 		bus_if = sdiodev->bus_if;
@@ -603,6 +646,65 @@ static struct sdio_driver brcmf_sdmmc_driver = {
 #endif	/* CONFIG_PM_SLEEP */
 };
 
+#ifdef CONFIG_BRCMFMAC_SDIO_OOB
+static int brcmf_sdio_pd_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct brcmf_sdio_oobirq *oobirq_entry;
+	int i, ret;
+
+	INIT_LIST_HEAD(&oobirq_lh);
+
+	for (i = 0; ; i++) {
+		res = platform_get_resource(pdev, IORESOURCE_IRQ, i);
+		if (!res)
+			break;
+
+		oobirq_entry = kzalloc(sizeof(struct brcmf_sdio_oobirq),
+				       GFP_KERNEL);
+		oobirq_entry->irq = res->start;
+		oobirq_entry->flags = res->flags & IRQF_TRIGGER_MASK;
+		list_add_tail(&oobirq_entry->list, &oobirq_lh);
+	}
+	if (i == 0)
+		return -ENXIO;
+
+	ret = sdio_register_driver(&brcmf_sdmmc_driver);
+
+	if (ret)
+		brcmf_dbg(ERROR, "sdio_register_driver failed: %d\n", ret);
+
+	return ret;
+}
+
+static struct platform_driver brcmf_sdio_pd = {
+	.probe		= brcmf_sdio_pd_probe,
+	.driver		= {
+		.name	= "brcmf_sdio_pd"
+	}
+};
+
+void brcmf_sdio_exit(void)
+{
+	brcmf_dbg(TRACE, "Enter\n");
+
+	sdio_unregister_driver(&brcmf_sdmmc_driver);
+
+	platform_driver_unregister(&brcmf_sdio_pd);
+}
+
+void brcmf_sdio_init(void)
+{
+	int ret;
+
+	brcmf_dbg(TRACE, "Enter\n");
+
+	ret = platform_driver_register(&brcmf_sdio_pd);
+
+	if (ret)
+		brcmf_dbg(ERROR, "platform_driver_register failed: %d\n", ret);
+}
+#else
 void brcmf_sdio_exit(void)
 {
 	brcmf_dbg(TRACE, "Enter\n");
@@ -621,3 +723,4 @@ void brcmf_sdio_init(void)
 	if (ret)
 		brcmf_dbg(ERROR, "sdio_register_driver failed: %d\n", ret);
 }
+#endif		/* CONFIG_BRCMFMAC_SDIO_OOB */

drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c

@@ -2352,6 +2352,24 @@ static void brcmf_sdbrcm_bus_stop(struct device *dev)
 	up(&bus->sdsem);
 }
 
+#ifdef CONFIG_BRCMFMAC_SDIO_OOB
+static inline void brcmf_sdbrcm_clrintr(struct brcmf_sdio *bus)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&bus->sdiodev->irq_en_lock, flags);
+	if (!bus->sdiodev->irq_en && !bus->ipend) {
+		enable_irq(bus->sdiodev->irq);
+		bus->sdiodev->irq_en = true;
+	}
+	spin_unlock_irqrestore(&bus->sdiodev->irq_en_lock, flags);
+}
+#else
+static inline void brcmf_sdbrcm_clrintr(struct brcmf_sdio *bus)
+{
+}
+#endif		/* CONFIG_BRCMFMAC_SDIO_OOB */
+
 static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus)
 {
 	u32 intstatus, newstatus = 0;
@@ -2509,6 +2527,8 @@ static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus)
 	bus->intstatus = intstatus;
 
 clkwait:
+	brcmf_sdbrcm_clrintr(bus);
+
 	if (data_ok(bus) && bus->ctrl_frame_stat &&
 		(bus->clkstate == CLK_AVAIL)) {
 		int ret, i;
@@ -3508,8 +3528,14 @@ static int brcmf_sdbrcm_bus_init(struct device *dev)
 	brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
 			       SBSDIO_FUNC1_CHIPCLKCSR, saveclk, &err);
 
+	if (ret == 0) {
+		ret = brcmf_sdio_intr_register(bus->sdiodev);
+		if (ret != 0)
+			brcmf_dbg(ERROR, "intr register failed:%d\n", ret);
+	}
+
 	/* If we didn't come up, turn off backplane clock */
-	if (!ret)
+	if (bus_if->state != BRCMF_BUS_DATA)
 		brcmf_sdbrcm_clkctl(bus, CLK_NONE, false);
 
 exit:
@@ -3867,7 +3893,7 @@ static void brcmf_sdbrcm_release(struct brcmf_sdio *bus)
 
 	if (bus) {
 		/* De-register interrupt handler */
-		brcmf_sdcard_intr_dereg(bus->sdiodev);
+		brcmf_sdio_intr_unregister(bus->sdiodev);
 
 		if (bus->sdiodev->bus_if->drvr) {
 			brcmf_detach(bus->sdiodev->dev);
@@ -3968,15 +3994,6 @@ void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev)
 		goto fail;
 	}
 
-	/* Register interrupt callback, but mask it (not operational yet). */
-	brcmf_dbg(INTR, "disable SDIO interrupts (not interested yet)\n");
-	ret = brcmf_sdcard_intr_reg(bus->sdiodev);
-	if (ret != 0) {
-		brcmf_dbg(ERROR, "FAILED: sdcard_intr_reg returned %d\n", ret);
-		goto fail;
-	}
-	brcmf_dbg(INTR, "registered SDIO interrupt function ok\n");
-
 	brcmf_dbg(INFO, "completed!!\n");
 
 	/* if firmware path present try to download and bring up bus */

drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h

@@ -43,6 +43,13 @@
 /* as of sdiod rev 0, supports 3 functions */
 #define SBSDIO_NUM_FUNCTION		3
 
+/* function 0 vendor specific CCCR registers */
+#define SDIO_CCCR_BRCM_SEPINT		0xf2
+
+#define  SDIO_SEPINT_MASK		0x01
+#define  SDIO_SEPINT_OE			0x02
+#define  SDIO_SEPINT_ACT_HI		0x04
+
 /* function 1 miscellaneous registers */
 
 /* sprom command and status */
@@ -144,13 +151,18 @@ struct brcmf_sdio_dev {
 	wait_queue_head_t request_buffer_wait;
 	struct device *dev;
 	struct brcmf_bus *bus_if;
+#ifdef CONFIG_BRCMFMAC_SDIO_OOB
+	unsigned int irq;		/* oob interrupt number */
+	unsigned long irq_flags;	/* board specific oob flags */
+	bool irq_en;			/* irq enable flags */
+	spinlock_t irq_en_lock;
+	bool irq_wake;			/* irq wake enable flags */
+#endif		/* CONFIG_BRCMFMAC_SDIO_OOB */
 };
 
-/* Register/deregister device interrupt handler. */
-extern int
-brcmf_sdcard_intr_reg(struct brcmf_sdio_dev *sdiodev);
-
-extern int brcmf_sdcard_intr_dereg(struct brcmf_sdio_dev *sdiodev);
+/* Register/deregister interrupt handler. */
+extern int brcmf_sdio_intr_register(struct brcmf_sdio_dev *sdiodev);
+extern int brcmf_sdio_intr_unregister(struct brcmf_sdio_dev *sdiodev);
 
 /* Access SDIO address space (e.g. CCCR) using CMD52 (single-byte interface).
  *   fn:   function number

drivers/net/wireless/ipw2x00/ipw2100.c

@@ -1963,10 +1963,8 @@ static int ipw2100_wdev_init(struct net_device *dev)
 	wdev->wiphy->n_cipher_suites = ARRAY_SIZE(ipw_cipher_suites);
 
 	set_wiphy_dev(wdev->wiphy, &priv->pci_dev->dev);
-	if (wiphy_register(wdev->wiphy)) {
-		ipw2100_down(priv);
+	if (wiphy_register(wdev->wiphy))
 		return -EIO;
-	}
 	return 0;
 }
 
@@ -6331,6 +6329,11 @@ static int ipw2100_pci_init_one(struct pci_dev *pci_dev,
 	printk(KERN_INFO DRV_NAME
 	       ": Detected Intel PRO/Wireless 2100 Network Connection\n");
 
+	err = ipw2100_wdev_init(dev);
+	if (err)
+		goto fail;
+	registered = 1;
+
 	/* Bring up the interface.  Pre 0.46, after we registered the
 	 * network device we would call ipw2100_up.  This introduced a race
 	 * condition with newer hotplug configurations (network was coming
@@ -6347,11 +6350,7 @@ static int ipw2100_pci_init_one(struct pci_dev *pci_dev,
 		       "Error calling register_netdev.\n");
 		goto fail;
 	}
-	registered = 1;
-
-	err = ipw2100_wdev_init(dev);
-	if (err)
-		goto fail;
+	registered = 2;
 
 	mutex_lock(&priv->action_mutex);
 
@@ -6390,13 +6389,16 @@ out:
 
       fail_unlock:
 	mutex_unlock(&priv->action_mutex);
-	wiphy_unregister(priv->ieee->wdev.wiphy);
-	kfree(priv->ieee->bg_band.channels);
       fail:
 	if (dev) {
-		if (registered)
+		if (registered >= 2)
 			unregister_netdev(dev);
 
+		if (registered) {
+			wiphy_unregister(priv->ieee->wdev.wiphy);
+			kfree(priv->ieee->bg_band.channels);
+		}
+
 		ipw2100_hw_stop_adapter(priv);
 
 		ipw2100_disable_interrupts(priv);

drivers/net/wireless/ipw2x00/ipw2200.c

@@ -11443,20 +11443,6 @@ static void ipw_bg_down(struct work_struct *work)
 	mutex_unlock(&priv->mutex);
 }
 
-/* Called by register_netdev() */
-static int ipw_net_init(struct net_device *dev)
-{
-	int rc = 0;
-	struct ipw_priv *priv = libipw_priv(dev);
-
-	mutex_lock(&priv->mutex);
-	if (ipw_up(priv))
-		rc = -EIO;
-	mutex_unlock(&priv->mutex);
-
-	return rc;
-}
-
 static int ipw_wdev_init(struct net_device *dev)
 {
 	int i, rc = 0;
@@ -11725,7 +11711,6 @@ static void ipw_prom_free(struct ipw_priv *priv)
 #endif
 
 static const struct net_device_ops ipw_netdev_ops = {
-	.ndo_init		= ipw_net_init,
 	.ndo_open		= ipw_net_open,
 	.ndo_stop		= ipw_net_stop,
 	.ndo_set_rx_mode	= ipw_net_set_multicast_list,
@@ -11848,17 +11833,24 @@ static int __devinit ipw_pci_probe(struct pci_dev *pdev,
 		goto out_release_irq;
 	}
 
-	mutex_unlock(&priv->mutex);
-	err = register_netdev(net_dev);
-	if (err) {
-		IPW_ERROR("failed to register network device\n");
+	if (ipw_up(priv)) {
+		mutex_unlock(&priv->mutex);
+		err = -EIO;
 		goto out_remove_sysfs;
 	}
 
+	mutex_unlock(&priv->mutex);
+
 	err = ipw_wdev_init(net_dev);
 	if (err) {
 		IPW_ERROR("failed to register wireless device\n");
-		goto out_unregister_netdev;
+		goto out_remove_sysfs;
+	}
+
+	err = register_netdev(net_dev);
+	if (err) {
+		IPW_ERROR("failed to register network device\n");
+		goto out_unregister_wiphy;
 	}
 
 #ifdef CONFIG_IPW2200_PROMISCUOUS
@@ -11867,10 +11859,8 @@ static int __devinit ipw_pci_probe(struct pci_dev *pdev,
 		if (err) {
 			IPW_ERROR("Failed to register promiscuous network "
 				  "device (error %d).\n", err);
-			wiphy_unregister(priv->ieee->wdev.wiphy);
-			kfree(priv->ieee->a_band.channels);
-			kfree(priv->ieee->bg_band.channels);
-			goto out_unregister_netdev;
+			unregister_netdev(priv->net_dev);
+			goto out_unregister_wiphy;
 		}
 	}
 #endif
@@ -11882,8 +11872,10 @@ static int __devinit ipw_pci_probe(struct pci_dev *pdev,
 
 	return 0;
 
-      out_unregister_netdev:
-	unregister_netdev(priv->net_dev);
+      out_unregister_wiphy:
+	wiphy_unregister(priv->ieee->wdev.wiphy);
+	kfree(priv->ieee->a_band.channels);
+	kfree(priv->ieee->bg_band.channels);
       out_remove_sysfs:
 	sysfs_remove_group(&pdev->dev.kobj, &ipw_attribute_group);
       out_release_irq:

drivers/net/wireless/iwlwifi/iwl-agn-lib.c

@@ -186,76 +186,8 @@ done:
 /*
  * BT coex
  */
-/*
- * Macros to access the lookup table.
- *
- * The lookup table has 7 inputs: bt3_prio, bt3_txrx, bt_rf_act, wifi_req,
-* wifi_prio, wifi_txrx and wifi_sh_ant_req.
- *
- * It has three outputs: WLAN_ACTIVE, WLAN_KILL and ANT_SWITCH
- *
- * The format is that "registers" 8 through 11 contain the WLAN_ACTIVE bits
- * one after another in 32-bit registers, and "registers" 0 through 7 contain
- * the WLAN_KILL and ANT_SWITCH bits interleaved (in that order).
- *
- * These macros encode that format.
- */
-#define LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, wifi_req, wifi_prio, \
-		  wifi_txrx, wifi_sh_ant_req) \
-	(bt3_prio | (bt3_txrx << 1) | (bt_rf_act << 2) | (wifi_req << 3) | \
-	(wifi_prio << 4) | (wifi_txrx << 5) | (wifi_sh_ant_req << 6))
-
-#define LUT_PTA_WLAN_ACTIVE_OP(lut, op, val) \
-	lut[8 + ((val) >> 5)] op (cpu_to_le32(BIT((val) & 0x1f)))
-#define LUT_TEST_PTA_WLAN_ACTIVE(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
-				 wifi_prio, wifi_txrx, wifi_sh_ant_req) \
-	(!!(LUT_PTA_WLAN_ACTIVE_OP(lut, &, LUT_VALUE(bt3_prio, bt3_txrx, \
-				   bt_rf_act, wifi_req, wifi_prio, wifi_txrx, \
-				   wifi_sh_ant_req))))
-#define LUT_SET_PTA_WLAN_ACTIVE(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
-				wifi_prio, wifi_txrx, wifi_sh_ant_req) \
-	LUT_PTA_WLAN_ACTIVE_OP(lut, |=, LUT_VALUE(bt3_prio, bt3_txrx, \
-			       bt_rf_act, wifi_req, wifi_prio, wifi_txrx, \
-			       wifi_sh_ant_req))
-#define LUT_CLEAR_PTA_WLAN_ACTIVE(lut, bt3_prio, bt3_txrx, bt_rf_act, \
-				  wifi_req, wifi_prio, wifi_txrx, \
-				  wifi_sh_ant_req) \
-	LUT_PTA_WLAN_ACTIVE_OP(lut, &= ~, LUT_VALUE(bt3_prio, bt3_txrx, \
-			       bt_rf_act, wifi_req, wifi_prio, wifi_txrx, \
-			       wifi_sh_ant_req))
-
-#define LUT_WLAN_KILL_OP(lut, op, val) \
-	lut[(val) >> 4] op (cpu_to_le32(BIT(((val) << 1) & 0x1e)))
-#define LUT_TEST_WLAN_KILL(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
-			   wifi_prio, wifi_txrx, wifi_sh_ant_req) \
-	(!!(LUT_WLAN_KILL_OP(lut, &, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
-			     wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))))
-#define LUT_SET_WLAN_KILL(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
-			  wifi_prio, wifi_txrx, wifi_sh_ant_req) \
-	LUT_WLAN_KILL_OP(lut, |=, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
-			 wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))
-#define LUT_CLEAR_WLAN_KILL(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
-			    wifi_prio, wifi_txrx, wifi_sh_ant_req) \
-	LUT_WLAN_KILL_OP(lut, &= ~, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
-			 wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))
-
-#define LUT_ANT_SWITCH_OP(lut, op, val) \
-	lut[(val) >> 4] op (cpu_to_le32(BIT((((val) << 1) & 0x1e) + 1)))
-#define LUT_TEST_ANT_SWITCH(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
-			    wifi_prio, wifi_txrx, wifi_sh_ant_req) \
-	(!!(LUT_ANT_SWITCH_OP(lut, &, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
-			      wifi_req, wifi_prio, wifi_txrx, \
-			      wifi_sh_ant_req))))
-#define LUT_SET_ANT_SWITCH(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
-			   wifi_prio, wifi_txrx, wifi_sh_ant_req) \
-	LUT_ANT_SWITCH_OP(lut, |=, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
-			  wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))
-#define LUT_CLEAR_ANT_SWITCH(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
-			     wifi_prio, wifi_txrx, wifi_sh_ant_req) \
-	LUT_ANT_SWITCH_OP(lut, &= ~, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
-			  wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))
-
-static const __le32 iwlagn_def_3w_lookup[12] = {
+/* Notmal TDM */
+static const __le32 iwlagn_def_3w_lookup[IWLAGN_BT_DECISION_LUT_SIZE] = {
 	cpu_to_le32(0xaaaaaaaa),
 	cpu_to_le32(0xaaaaaaaa),
 	cpu_to_le32(0xaeaaaaaa),
@@ -270,7 +202,25 @@ static const __le32 iwlagn_def_3w_lookup[12] = {
 	cpu_to_le32(0xf0005000),
 };
 
-static const __le32 iwlagn_concurrent_lookup[12] = {
+
+/* Loose Coex */
+static const __le32 iwlagn_loose_lookup[IWLAGN_BT_DECISION_LUT_SIZE] = {
+	cpu_to_le32(0xaaaaaaaa),
+	cpu_to_le32(0xaaaaaaaa),
+	cpu_to_le32(0xaeaaaaaa),
+	cpu_to_le32(0xaaaaaaaa),
+	cpu_to_le32(0xcc00ff28),
+	cpu_to_le32(0x0000aaaa),
+	cpu_to_le32(0xcc00aaaa),
+	cpu_to_le32(0x0000aaaa),
+	cpu_to_le32(0x00000000),
+	cpu_to_le32(0x00000000),
+	cpu_to_le32(0xf0005000),
+	cpu_to_le32(0xf0005000),
+};
+
+/* Full concurrency */
+static const __le32 iwlagn_concurrent_lookup[IWLAGN_BT_DECISION_LUT_SIZE] = {
 	cpu_to_le32(0xaaaaaaaa),
 	cpu_to_le32(0xaaaaaaaa),
 	cpu_to_le32(0xaaaaaaaa),
@@ -325,6 +275,7 @@ void iwlagn_send_advance_bt_config(struct iwl_priv *priv)
 
 	basic.kill_ack_mask = priv->kill_ack_mask;
 	basic.kill_cts_mask = priv->kill_cts_mask;
+	basic.reduce_txpower = priv->reduced_txpower;
 	basic.valid = priv->bt_valid;
 
 	/*
@@ -610,29 +561,62 @@ static void iwlagn_print_uartmsg(struct iwl_priv *priv,
 			BT_UART_MSG_FRAME7CONNECTABLE_POS);
 }
 
-static void iwlagn_set_kill_msk(struct iwl_priv *priv,
+static bool iwlagn_set_kill_msk(struct iwl_priv *priv,
 				struct iwl_bt_uart_msg *uart_msg)
 {
-	u8 kill_msk;
-	static const __le32 bt_kill_ack_msg[2] = {
+	bool need_update = false;
+	u8 kill_msk = IWL_BT_KILL_REDUCE;
+	static const __le32 bt_kill_ack_msg[3] = {
 		IWLAGN_BT_KILL_ACK_MASK_DEFAULT,
-		IWLAGN_BT_KILL_ACK_CTS_MASK_SCO };
-	static const __le32 bt_kill_cts_msg[2] = {
+		IWLAGN_BT_KILL_ACK_CTS_MASK_SCO,
+		IWLAGN_BT_KILL_ACK_CTS_MASK_REDUCE};
+	static const __le32 bt_kill_cts_msg[3] = {
 		IWLAGN_BT_KILL_CTS_MASK_DEFAULT,
-		IWLAGN_BT_KILL_ACK_CTS_MASK_SCO };
+		IWLAGN_BT_KILL_ACK_CTS_MASK_SCO,
+		IWLAGN_BT_KILL_ACK_CTS_MASK_REDUCE};
 
-	kill_msk = (BT_UART_MSG_FRAME3SCOESCO_MSK & uart_msg->frame3)
-		? 1 : 0;
+	if (!priv->reduced_txpower)
+		kill_msk = (BT_UART_MSG_FRAME3SCOESCO_MSK & uart_msg->frame3)
+			? IWL_BT_KILL_OVERRIDE : IWL_BT_KILL_DEFAULT;
 	if (priv->kill_ack_mask != bt_kill_ack_msg[kill_msk] ||
 	    priv->kill_cts_mask != bt_kill_cts_msg[kill_msk]) {
 		priv->bt_valid |= IWLAGN_BT_VALID_KILL_ACK_MASK;
 		priv->kill_ack_mask = bt_kill_ack_msg[kill_msk];
 		priv->bt_valid |= IWLAGN_BT_VALID_KILL_CTS_MASK;
 		priv->kill_cts_mask = bt_kill_cts_msg[kill_msk];
+		need_update = true;
+	}
+	return need_update;
+}
 
-		/* schedule to send runtime bt_config */
-		queue_work(priv->workqueue, &priv->bt_runtime_config);
+static bool iwlagn_fill_txpower_mode(struct iwl_priv *priv,
+				struct iwl_bt_uart_msg *uart_msg)
+{
+	bool need_update = false;
+
+	if (!priv->reduced_txpower &&
+	    !iwl_is_associated(priv, IWL_RXON_CTX_PAN) &&
+	    (uart_msg->frame3 & (BT_UART_MSG_FRAME3ACL_MSK |
+	    BT_UART_MSG_FRAME3OBEX_MSK)) &&
+	    !(uart_msg->frame3 & (BT_UART_MSG_FRAME3SCOESCO_MSK |
+	    BT_UART_MSG_FRAME3SNIFF_MSK | BT_UART_MSG_FRAME3A2DP_MSK))) {
+		/* enabling reduced tx power */
+		priv->reduced_txpower = true;
+		priv->bt_valid |= IWLAGN_BT_VALID_REDUCED_TX_PWR;
+		need_update = true;
+	} else if (priv->reduced_txpower &&
+		   (iwl_is_associated(priv, IWL_RXON_CTX_PAN) ||
+		   (uart_msg->frame3 & (BT_UART_MSG_FRAME3SCOESCO_MSK |
+		   BT_UART_MSG_FRAME3SNIFF_MSK | BT_UART_MSG_FRAME3A2DP_MSK)) ||
+		   !(uart_msg->frame3 & (BT_UART_MSG_FRAME3ACL_MSK |
+		   BT_UART_MSG_FRAME3OBEX_MSK)))) {
+		/* disable reduced tx power */
+		priv->reduced_txpower = false;
+		priv->bt_valid &= ~IWLAGN_BT_VALID_REDUCED_TX_PWR;
+		need_update = true;
 	}
+
+	return need_update;
 }
 
 int iwlagn_bt_coex_profile_notif(struct iwl_priv *priv,
@@ -680,7 +664,12 @@ int iwlagn_bt_coex_profile_notif(struct iwl_priv *priv,
 		}
 	}
 
-	iwlagn_set_kill_msk(priv, uart_msg);
+	/* schedule to send runtime bt_config */
+	/* check reduce power before change ack/cts kill mask */
+	if (iwlagn_fill_txpower_mode(priv, uart_msg) ||
+	    iwlagn_set_kill_msk(priv, uart_msg))
+		queue_work(priv->workqueue, &priv->bt_runtime_config);
+
 
 	/* FIXME: based on notification, adjust the prio_boost */
 

drivers/net/wireless/iwlwifi/iwl-agn-rx.c

@@ -764,7 +764,8 @@ static void iwlagn_pass_packet_to_mac80211(struct iwl_priv *priv,
 	fraglen = len - hdrlen;
 
 	if (fraglen) {
-		int offset = (void *)hdr - rxb_addr(rxb) + rxb_offset(rxb);
+		int offset = (void *)hdr + hdrlen -
+			     rxb_addr(rxb) + rxb_offset(rxb);
 
 		skb_add_rx_frag(skb, 0, rxb_steal_page(rxb), offset,
 				fraglen, rxb->truesize);

drivers/net/wireless/iwlwifi/iwl-agn.c

@@ -1307,6 +1307,9 @@ static int iwl_init_geos(struct iwl_priv *priv)
 		priv->hw_params.sku &= ~EEPROM_SKU_CAP_BAND_52GHZ;
 	}
 
+	if (iwlwifi_mod_params.disable_5ghz)
+		priv->bands[IEEE80211_BAND_5GHZ].n_channels = 0;
+
 	IWL_INFO(priv, "Tunable channels: %d 802.11bg, %d 802.11a channels\n",
 		   priv->bands[IEEE80211_BAND_2GHZ].n_channels,
 		   priv->bands[IEEE80211_BAND_5GHZ].n_channels);
@@ -1417,38 +1420,37 @@ void iwl_set_hw_params(struct iwl_priv *priv)
 
 
 
-void iwl_debug_config(struct iwl_priv *priv)
+/* show what optional capabilities we have */
+void iwl_option_config(struct iwl_priv *priv)
 {
-	dev_printk(KERN_INFO, priv->trans->dev, "CONFIG_IWLWIFI_DEBUG "
 #ifdef CONFIG_IWLWIFI_DEBUG
-		"enabled\n");
+	IWL_INFO(priv, "CONFIG_IWLWIFI_DEBUG enabled\n");
 #else
-		"disabled\n");
+	IWL_INFO(priv, "CONFIG_IWLWIFI_DEBUG disabled\n");
 #endif
-	dev_printk(KERN_INFO, priv->trans->dev, "CONFIG_IWLWIFI_DEBUGFS "
+
 #ifdef CONFIG_IWLWIFI_DEBUGFS
-		"enabled\n");
+	IWL_INFO(priv, "CONFIG_IWLWIFI_DEBUGFS enabled\n");
 #else
-		"disabled\n");
+	IWL_INFO(priv, "CONFIG_IWLWIFI_DEBUGFS disabled\n");
 #endif
-	dev_printk(KERN_INFO, priv->trans->dev, "CONFIG_IWLWIFI_DEVICE_TRACING "
+
 #ifdef CONFIG_IWLWIFI_DEVICE_TRACING
-		"enabled\n");
+	IWL_INFO(priv, "CONFIG_IWLWIFI_DEVICE_TRACING enabled\n");
 #else
-		"disabled\n");
+	IWL_INFO(priv, "CONFIG_IWLWIFI_DEVICE_TRACING disabled\n");
 #endif
 
-	dev_printk(KERN_INFO, priv->trans->dev, "CONFIG_IWLWIFI_DEVICE_TESTMODE "
 #ifdef CONFIG_IWLWIFI_DEVICE_TESTMODE
-		"enabled\n");
+	IWL_INFO(priv, "CONFIG_IWLWIFI_DEVICE_TESTMODE enabled\n");
 #else
-		"disabled\n");
+	IWL_INFO(priv, "CONFIG_IWLWIFI_DEVICE_TESTMODE disabled\n");
 #endif
-	dev_printk(KERN_INFO, priv->trans->dev, "CONFIG_IWLWIFI_P2P "
+
 #ifdef CONFIG_IWLWIFI_P2P
-		"enabled\n");
+	IWL_INFO(priv, "CONFIG_IWLWIFI_P2P enabled\n");
 #else
-		"disabled\n");
+	IWL_INFO(priv, "CONFIG_IWLWIFI_P2P disabled\n");
 #endif
 }
 
@@ -1567,8 +1569,7 @@ static struct iwl_op_mode *iwl_op_mode_dvm_start(struct iwl_trans *trans,
 
 	SET_IEEE80211_DEV(priv->hw, priv->trans->dev);
 
-	/* show what debugging capabilities we have */
-	iwl_debug_config(priv);
+	iwl_option_config(priv);
 
 	IWL_DEBUG_INFO(priv, "*** LOAD DRIVER ***\n");
 
@@ -1586,7 +1587,6 @@ static struct iwl_op_mode *iwl_op_mode_dvm_start(struct iwl_trans *trans,
 	/* these spin locks will be used in apm_ops.init and EEPROM access
 	 * we should init now
 	 */
-	spin_lock_init(&priv->trans->reg_lock);
 	spin_lock_init(&priv->statistics.lock);
 
 	/***********************

drivers/net/wireless/iwlwifi/iwl-agn.h

@@ -523,7 +523,7 @@ static inline const char *iwl_dvm_get_cmd_string(u8 cmd)
 void iwl_setup_deferred_work(struct iwl_priv *priv);
 int iwl_send_wimax_coex(struct iwl_priv *priv);
 int iwl_send_bt_env(struct iwl_priv *priv, u8 action, u8 type);
-void iwl_debug_config(struct iwl_priv *priv);
+void iwl_option_config(struct iwl_priv *priv);
 void iwl_set_hw_params(struct iwl_priv *priv);
 void iwl_init_context(struct iwl_priv *priv, u32 ucode_flags);
 int iwl_init_drv(struct iwl_priv *priv);

drivers/net/wireless/iwlwifi/iwl-commands.h

@@ -1877,9 +1877,16 @@ struct iwl_bt_cmd {
 
 #define IWLAGN_BT3_T7_DEFAULT		1
 
+enum iwl_bt_kill_idx {
+	IWL_BT_KILL_DEFAULT = 0,
+	IWL_BT_KILL_OVERRIDE = 1,
+	IWL_BT_KILL_REDUCE = 2,
+};
+
 #define IWLAGN_BT_KILL_ACK_MASK_DEFAULT	cpu_to_le32(0xffff0000)
 #define IWLAGN_BT_KILL_CTS_MASK_DEFAULT	cpu_to_le32(0xffff0000)
 #define IWLAGN_BT_KILL_ACK_CTS_MASK_SCO	cpu_to_le32(0xffffffff)
+#define IWLAGN_BT_KILL_ACK_CTS_MASK_REDUCE	cpu_to_le32(0)
 
 #define IWLAGN_BT3_PRIO_SAMPLE_DEFAULT	2
 
@@ -1891,7 +1898,7 @@ struct iwl_bt_cmd {
 #define IWLAGN_BT_VALID_3W_TIMERS	cpu_to_le16(BIT(3))
 #define IWLAGN_BT_VALID_KILL_ACK_MASK	cpu_to_le16(BIT(4))
 #define IWLAGN_BT_VALID_KILL_CTS_MASK	cpu_to_le16(BIT(5))
-#define IWLAGN_BT_VALID_BT4_TIMES	cpu_to_le16(BIT(6))
+#define IWLAGN_BT_VALID_REDUCED_TX_PWR	cpu_to_le16(BIT(6))
 #define IWLAGN_BT_VALID_3W_LUT		cpu_to_le16(BIT(7))
 
 #define IWLAGN_BT_ALL_VALID_MSK		(IWLAGN_BT_VALID_ENABLE_FLAGS | \
@@ -1900,9 +1907,11 @@ struct iwl_bt_cmd {
 					IWLAGN_BT_VALID_3W_TIMERS | \
 					IWLAGN_BT_VALID_KILL_ACK_MASK | \
 					IWLAGN_BT_VALID_KILL_CTS_MASK | \
-					IWLAGN_BT_VALID_BT4_TIMES | \
+					IWLAGN_BT_VALID_REDUCED_TX_PWR | \
 					IWLAGN_BT_VALID_3W_LUT)
 
+#define IWLAGN_BT_DECISION_LUT_SIZE	12
+
 struct iwl_basic_bt_cmd {
 	u8 flags;
 	u8 ledtime; /* unused */
@@ -1913,8 +1922,9 @@ struct iwl_basic_bt_cmd {
 	u8 bt3_prio_sample_time;
 	u8 bt3_timer_t2_value;
 	__le16 bt4_reaction_time; /* unused */
-	__le32 bt3_lookup_table[12];
-	__le16 bt4_decision_time; /* unused */
+	__le32 bt3_lookup_table[IWLAGN_BT_DECISION_LUT_SIZE];
+	u8 reduce_txpower;
+	u8 reserved;
 	__le16 valid;
 };
 
@@ -3634,6 +3644,9 @@ enum iwl_bt_coex_profile_traffic_load {
 		(0x3<<BT_UART_MSG_2_FRAME7RESERVED_POS)
 
 
+#define BT_ENABLE_REDUCED_TXPOWER_THRESHOLD	(-62)
+#define BT_DISABLE_REDUCED_TXPOWER_THRESHOLD	(-65)
+
 struct iwl_bt_uart_msg {
 	u8 header;
 	u8 frame1;

drivers/net/wireless/iwlwifi/iwl-dev.h

@@ -921,6 +921,7 @@ struct iwl_priv {
 	__le32 kill_ack_mask;
 	__le32 kill_cts_mask;
 	__le16 bt_valid;
+	bool reduced_txpower;
 	u16 bt_on_thresh;
 	u16 bt_duration;
 	u16 dynamic_frag_thresh;

drivers/net/wireless/iwlwifi/iwl-drv.c

@@ -66,6 +66,7 @@
 #include <linux/module.h>
 
 #include "iwl-drv.h"
+#include "iwl-debug.h"
 #include "iwl-trans.h"
 #include "iwl-op-mode.h"
 #include "iwl-agn-hw.h"
@@ -892,10 +893,9 @@ struct iwl_drv *iwl_drv_start(struct iwl_trans *trans,
 	int ret;
 
 	drv = kzalloc(sizeof(*drv), GFP_KERNEL);
-	if (!drv) {
-		dev_printk(KERN_ERR, trans->dev, "Couldn't allocate iwl_drv");
+	if (!drv)
 		return NULL;
-	}
+
 	drv->trans = trans;
 	drv->dev = trans->dev;
 	drv->cfg = cfg;
@@ -905,7 +905,7 @@ struct iwl_drv *iwl_drv_start(struct iwl_trans *trans,
 	ret = iwl_request_firmware(drv, true);
 
 	if (ret) {
-		dev_printk(KERN_ERR, trans->dev, "Couldn't request the fw");
+		IWL_ERR(trans, "Couldn't request the fw\n");
 		kfree(drv);
 		drv = NULL;
 	}
@@ -1012,3 +1012,7 @@ module_param_named(auto_agg, iwlwifi_mod_params.auto_agg,
 		bool, S_IRUGO);
 MODULE_PARM_DESC(auto_agg,
 		 "enable agg w/o check traffic load (default: enable)");
+
+module_param_named(5ghz_disable, iwlwifi_mod_params.disable_5ghz,
+		bool, S_IRUGO);
+MODULE_PARM_DESC(5ghz_disable, "disable 5GHz band (default: 0 [enabled])");

drivers/net/wireless/iwlwifi/iwl-modparams.h

@@ -60,8 +60,8 @@
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  *****************************************************************************/
-#ifndef __iwl_shared_h__
-#define __iwl_shared_h__
+#ifndef __iwl_modparams_h__
+#define __iwl_modparams_h__
 
 #include <linux/types.h>
 #include <linux/spinlock.h>
@@ -103,6 +103,7 @@ enum iwl_power_level {
  * @ant_coupling: antenna coupling in dB, default = 0
  * @bt_ch_announce: BT channel inhibition, default = enable
  * @auto_agg: enable agg. without check, default = true
+ * @disable_5ghz: disable 5GHz capability, default = false
  */
 struct iwl_mod_params {
 	int sw_crypto;
@@ -119,6 +120,7 @@ struct iwl_mod_params {
 	int ant_coupling;
 	bool bt_ch_announce;
 	bool auto_agg;
+	bool disable_5ghz;
 };
 
-#endif /* #__iwl_shared_h__ */
+#endif /* #__iwl_modparams_h__ */

drivers/net/wireless/iwlwifi/iwl-trans-pcie.c

@@ -2175,6 +2175,7 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev,
 
 	/* Initialize the wait queue for commands */
 	init_waitqueue_head(&trans->wait_command_queue);
+	spin_lock_init(&trans->reg_lock);
 
 	return trans;
 

drivers/net/wireless/libertas/firmware.c

@@ -2,6 +2,7 @@
  * Firmware loading and handling functions.
  */
 
+#include <linux/sched.h>
 #include <linux/firmware.h>
 #include <linux/firmware.h>
 #include <linux/module.h>

drivers/net/wireless/mwifiex/Kconfig

@@ -10,12 +10,12 @@ config MWIFIEX
 	  mwifiex.
 
 config MWIFIEX_SDIO
-	tristate "Marvell WiFi-Ex Driver for SD8787/SD8797"
+	tristate "Marvell WiFi-Ex Driver for SD8786/SD8787/SD8797"
 	depends on MWIFIEX && MMC
 	select FW_LOADER
 	---help---
 	  This adds support for wireless adapters based on Marvell
-	  8787/8797 chipsets with SDIO interface.
+	  8786/8787/8797 chipsets with SDIO interface.
 
 	  If you choose to build it as a module, it will be called
 	  mwifiex_sdio.

drivers/net/wireless/mwifiex/fw.h

@@ -993,8 +993,7 @@ struct mwifiex_ie_types_wmm_queue_status {
 struct ieee_types_vendor_header {
 	u8 element_id;
 	u8 len;
-	u8 oui[3];
-	u8 oui_type;
+	u8 oui[4];	/* 0~2: oui, 3: oui_type */
 	u8 oui_subtype;
 	u8 version;
 } __packed;

drivers/net/wireless/mwifiex/sdio.c

@@ -253,6 +253,8 @@ static int mwifiex_sdio_resume(struct device *dev)
 	return 0;
 }
 
+/* Device ID for SD8786 */
+#define SDIO_DEVICE_ID_MARVELL_8786   (0x9116)
 /* Device ID for SD8787 */
 #define SDIO_DEVICE_ID_MARVELL_8787   (0x9119)
 /* Device ID for SD8797 */
@@ -260,6 +262,7 @@ static int mwifiex_sdio_resume(struct device *dev)
 
 /* WLAN IDs */
 static const struct sdio_device_id mwifiex_ids[] = {
+	{SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8786)},
 	{SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8787)},
 	{SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8797)},
 	{},
@@ -1599,6 +1602,9 @@ static int mwifiex_register_dev(struct mwifiex_adapter *adapter)
 	adapter->dev = &func->dev;
 
 	switch (func->device) {
+	case SDIO_DEVICE_ID_MARVELL_8786:
+		strcpy(adapter->fw_name, SD8786_DEFAULT_FW_NAME);
+		break;
 	case SDIO_DEVICE_ID_MARVELL_8797:
 		strcpy(adapter->fw_name, SD8797_DEFAULT_FW_NAME);
 		break;
@@ -1807,5 +1813,6 @@ MODULE_AUTHOR("Marvell International Ltd.");
 MODULE_DESCRIPTION("Marvell WiFi-Ex SDIO Driver version " SDIO_VERSION);
 MODULE_VERSION(SDIO_VERSION);
 MODULE_LICENSE("GPL v2");
+MODULE_FIRMWARE(SD8786_DEFAULT_FW_NAME);
 MODULE_FIRMWARE(SD8787_DEFAULT_FW_NAME);
 MODULE_FIRMWARE(SD8797_DEFAULT_FW_NAME);

drivers/net/wireless/mwifiex/sdio.h

@@ -28,6 +28,7 @@
 
 #include "main.h"
 
+#define SD8786_DEFAULT_FW_NAME "mrvl/sd8786_uapsta.bin"
 #define SD8787_DEFAULT_FW_NAME "mrvl/sd8787_uapsta.bin"
 #define SD8797_DEFAULT_FW_NAME "mrvl/sd8797_uapsta.bin"
 

drivers/net/wireless/rt2x00/rt2800.h

@@ -102,6 +102,8 @@
 #define BBP_SIZE			0x00ff
 #define RF_BASE				0x0004
 #define RF_SIZE				0x0010
+#define RFCSR_BASE			0x0000
+#define RFCSR_SIZE			0x0040
 
 /*
  * Number of TX queues.

drivers/net/wireless/rt2x00/rt2800lib.c

@@ -836,6 +836,13 @@ const struct rt2x00debug rt2800_rt2x00debug = {
 		.word_size	= sizeof(u32),
 		.word_count	= RF_SIZE / sizeof(u32),
 	},
+	.rfcsr	= {
+		.read		= rt2800_rfcsr_read,
+		.write		= rt2800_rfcsr_write,
+		.word_base	= RFCSR_BASE,
+		.word_size	= sizeof(u8),
+		.word_count	= RFCSR_SIZE / sizeof(u8),
+	},
 };
 EXPORT_SYMBOL_GPL(rt2800_rt2x00debug);
 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */

drivers/net/wireless/rt2x00/rt2x00debug.c

@@ -70,6 +70,7 @@ struct rt2x00debug_intf {
 	 *     - eeprom offset/value files
 	 *     - bbp offset/value files
 	 *     - rf offset/value files
+	 *     - rfcsr offset/value files
 	 *   - queue folder
 	 *     - frame dump file
 	 *     - queue stats file
@@ -89,6 +90,8 @@ struct rt2x00debug_intf {
 	struct dentry *bbp_val_entry;
 	struct dentry *rf_off_entry;
 	struct dentry *rf_val_entry;
+	struct dentry *rfcsr_off_entry;
+	struct dentry *rfcsr_val_entry;
 	struct dentry *queue_folder;
 	struct dentry *queue_frame_dump_entry;
 	struct dentry *queue_stats_entry;
@@ -131,6 +134,7 @@ struct rt2x00debug_intf {
 	unsigned int offset_eeprom;
 	unsigned int offset_bbp;
 	unsigned int offset_rf;
+	unsigned int offset_rfcsr;
 };
 
 void rt2x00debug_update_crypto(struct rt2x00_dev *rt2x00dev,
@@ -525,6 +529,7 @@ RT2X00DEBUGFS_OPS(csr, "0x%.8x\n", u32);
 RT2X00DEBUGFS_OPS(eeprom, "0x%.4x\n", u16);
 RT2X00DEBUGFS_OPS(bbp, "0x%.2x\n", u8);
 RT2X00DEBUGFS_OPS(rf, "0x%.8x\n", u32);
+RT2X00DEBUGFS_OPS(rfcsr, "0x%.2x\n", u8);
 
 static ssize_t rt2x00debug_read_dev_flags(struct file *file,
 					  char __user *buf,
@@ -614,7 +619,7 @@ static struct dentry *rt2x00debug_create_file_chipset(const char *name,
 	const struct rt2x00debug *debug = intf->debug;
 	char *data;
 
-	data = kzalloc(8 * MAX_LINE_LENGTH, GFP_KERNEL);
+	data = kzalloc(9 * MAX_LINE_LENGTH, GFP_KERNEL);
 	if (!data)
 		return NULL;
 
@@ -624,22 +629,22 @@ static struct dentry *rt2x00debug_create_file_chipset(const char *name,
 	data += sprintf(data, "revision:\t%04x\n", intf->rt2x00dev->chip.rev);
 	data += sprintf(data, "\n");
 	data += sprintf(data, "register\tbase\twords\twordsize\n");
-	data += sprintf(data, "csr\t%d\t%d\t%d\n",
-			debug->csr.word_base,
-			debug->csr.word_count,
-			debug->csr.word_size);
-	data += sprintf(data, "eeprom\t%d\t%d\t%d\n",
-			debug->eeprom.word_base,
-			debug->eeprom.word_count,
-			debug->eeprom.word_size);
-	data += sprintf(data, "bbp\t%d\t%d\t%d\n",
-			debug->bbp.word_base,
-			debug->bbp.word_count,
-			debug->bbp.word_size);
-	data += sprintf(data, "rf\t%d\t%d\t%d\n",
-			debug->rf.word_base,
-			debug->rf.word_count,
-			debug->rf.word_size);
+#define RT2X00DEBUGFS_SPRINTF_REGISTER(__name)			\
+{								\
+	if(debug->__name.read)					\
+		data += sprintf(data, __stringify(__name)	\
+				"\t%d\t%d\t%d\n",		\
+				debug->__name.word_base,	\
+				debug->__name.word_count,	\
+				debug->__name.word_size);	\
+}
+	RT2X00DEBUGFS_SPRINTF_REGISTER(csr);
+	RT2X00DEBUGFS_SPRINTF_REGISTER(eeprom);
+	RT2X00DEBUGFS_SPRINTF_REGISTER(bbp);
+	RT2X00DEBUGFS_SPRINTF_REGISTER(rf);
+	RT2X00DEBUGFS_SPRINTF_REGISTER(rfcsr);
+#undef RT2X00DEBUGFS_SPRINTF_REGISTER
+
 	blob->size = strlen(blob->data);
 
 	return debugfs_create_blob(name, S_IRUSR, intf->driver_folder, blob);
@@ -694,31 +699,34 @@ void rt2x00debug_register(struct rt2x00_dev *rt2x00dev)
 	if (IS_ERR(intf->register_folder) || !intf->register_folder)
 		goto exit;
 
-#define RT2X00DEBUGFS_CREATE_REGISTER_ENTRY(__intf, __name)	\
-({								\
-	(__intf)->__name##_off_entry =				\
-	    debugfs_create_u32(__stringify(__name) "_offset",	\
-			       S_IRUSR | S_IWUSR,		\
-			       (__intf)->register_folder,	\
-			       &(__intf)->offset_##__name);	\
-	if (IS_ERR((__intf)->__name##_off_entry)		\
-			|| !(__intf)->__name##_off_entry)	\
-		goto exit;					\
-								\
-	(__intf)->__name##_val_entry =				\
-	    debugfs_create_file(__stringify(__name) "_value",	\
-				S_IRUSR | S_IWUSR,		\
-				(__intf)->register_folder,	\
-				(__intf), &rt2x00debug_fop_##__name);\
-	if (IS_ERR((__intf)->__name##_val_entry)		\
-			|| !(__intf)->__name##_val_entry)	\
-		goto exit;					\
+#define RT2X00DEBUGFS_CREATE_REGISTER_ENTRY(__intf, __name)			\
+({										\
+	if(debug->__name.read) {						\
+		(__intf)->__name##_off_entry =					\
+		debugfs_create_u32(__stringify(__name) "_offset",		\
+				       S_IRUSR | S_IWUSR,			\
+				       (__intf)->register_folder,		\
+				       &(__intf)->offset_##__name);		\
+		if (IS_ERR((__intf)->__name##_off_entry)			\
+				|| !(__intf)->__name##_off_entry)		\
+			goto exit;						\
+										\
+		(__intf)->__name##_val_entry =					\
+		debugfs_create_file(__stringify(__name) "_value",		\
+					S_IRUSR | S_IWUSR,			\
+					(__intf)->register_folder,		\
+					(__intf), &rt2x00debug_fop_##__name);	\
+		if (IS_ERR((__intf)->__name##_val_entry)			\
+				|| !(__intf)->__name##_val_entry)		\
+			goto exit;						\
+	}									\
 })
 
 	RT2X00DEBUGFS_CREATE_REGISTER_ENTRY(intf, csr);
 	RT2X00DEBUGFS_CREATE_REGISTER_ENTRY(intf, eeprom);
 	RT2X00DEBUGFS_CREATE_REGISTER_ENTRY(intf, bbp);
 	RT2X00DEBUGFS_CREATE_REGISTER_ENTRY(intf, rf);
+	RT2X00DEBUGFS_CREATE_REGISTER_ENTRY(intf, rfcsr);
 
 #undef RT2X00DEBUGFS_CREATE_REGISTER_ENTRY
 
@@ -770,6 +778,8 @@ void rt2x00debug_deregister(struct rt2x00_dev *rt2x00dev)
 	debugfs_remove(intf->queue_stats_entry);
 	debugfs_remove(intf->queue_frame_dump_entry);
 	debugfs_remove(intf->queue_folder);
+	debugfs_remove(intf->rfcsr_val_entry);
+	debugfs_remove(intf->rfcsr_off_entry);
 	debugfs_remove(intf->rf_val_entry);
 	debugfs_remove(intf->rf_off_entry);
 	debugfs_remove(intf->bbp_val_entry);

drivers/net/wireless/rt2x00/rt2x00debug.h

@@ -65,6 +65,7 @@ struct rt2x00debug {
 	RT2X00DEBUGFS_REGISTER_ENTRY(eeprom, u16);
 	RT2X00DEBUGFS_REGISTER_ENTRY(bbp, u8);
 	RT2X00DEBUGFS_REGISTER_ENTRY(rf, u32);
+	RT2X00DEBUGFS_REGISTER_ENTRY(rfcsr, u8);
 };
 
 #endif /* RT2X00DEBUG_H */

include/linux/nl80211.h

@@ -2154,6 +2154,8 @@ enum nl80211_mntr_flags {
  * @NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR: maximum number of neighbors
  * to synchronize to for 11s default synchronization method (see 11C.12.2.2)
  *
+ * @NL80211_MESHCONF_HT_OPMODE: set mesh HT protection mode.
+ *
  * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
  */
 enum nl80211_meshconf_params {
@@ -2179,6 +2181,7 @@ enum nl80211_meshconf_params {
 	NL80211_MESHCONF_FORWARDING,
 	NL80211_MESHCONF_RSSI_THRESHOLD,
 	NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR,
+	NL80211_MESHCONF_HT_OPMODE,
 
 	/* keep last */
 	__NL80211_MESHCONF_ATTR_AFTER_LAST,

include/net/cfg80211.h

@@ -821,6 +821,7 @@ struct mesh_config {
 	bool  dot11MeshGateAnnouncementProtocol;
 	bool dot11MeshForwarding;
 	s32 rssi_threshold;
+	u16 ht_opmode;
 };
 
 /**
@@ -1514,6 +1515,16 @@ struct cfg80211_gtk_rekey_data {
  *	later passes to cfg80211_probe_status().
  *
  * @set_noack_map: Set the NoAck Map for the TIDs.
+ *
+ * @get_et_sset_count:  Ethtool API to get string-set count.
+ *	See @ethtool_ops.get_sset_count
+ *
+ * @get_et_stats:  Ethtool API to get a set of u64 stats.
+ *	See @ethtool_ops.get_ethtool_stats
+ *
+ * @get_et_strings:  Ethtool API to get a set of strings to describe stats
+ *	and perhaps other supported types of ethtool data-sets.
+ *	See @ethtool_ops.get_strings
  */
 struct cfg80211_ops {
 	int	(*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
@@ -1712,6 +1723,13 @@ struct cfg80211_ops {
 
 	struct ieee80211_channel *(*get_channel)(struct wiphy *wiphy,
 					       enum nl80211_channel_type *type);
+
+	int	(*get_et_sset_count)(struct wiphy *wiphy,
+				     struct net_device *dev, int sset);
+	void	(*get_et_stats)(struct wiphy *wiphy, struct net_device *dev,
+				struct ethtool_stats *stats, u64 *data);
+	void	(*get_et_strings)(struct wiphy *wiphy, struct net_device *dev,
+				  u32 sset, u8 *data);
 };
 
 /*

include/net/mac80211.h

@@ -2223,6 +2223,14 @@ enum ieee80211_rate_control_changed {
  *	The @tids parameter is a bitmap and tells the driver which TIDs the
  *	frames will be on; it will at most have two bits set.
  *	This callback must be atomic.
+ *
+ * @get_et_sset_count:  Ethtool API to get string-set count.
+ *
+ * @get_et_stats:  Ethtool API to get a set of u64 stats.
+ *
+ * @get_et_strings:  Ethtool API to get a set of strings to describe stats
+ *	and perhaps other supported types of ethtool data-sets.
+ *
  */
 struct ieee80211_ops {
 	void (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb);
@@ -2353,6 +2361,15 @@ struct ieee80211_ops {
 					u16 tids, int num_frames,
 					enum ieee80211_frame_release_type reason,
 					bool more_data);
+
+	int	(*get_et_sset_count)(struct ieee80211_hw *hw,
+				     struct ieee80211_vif *vif, int sset);
+	void	(*get_et_stats)(struct ieee80211_hw *hw,
+				struct ieee80211_vif *vif,
+				struct ethtool_stats *stats, u64 *data);
+	void	(*get_et_strings)(struct ieee80211_hw *hw,
+				  struct ieee80211_vif *vif,
+				  u32 sset, u8 *data);
 };
 
 /**

net/mac80211/cfg.c

@@ -450,6 +450,180 @@ static void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo)
 		sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_TDLS_PEER);
 }
 
+static const char ieee80211_gstrings_sta_stats[][ETH_GSTRING_LEN] = {
+	"rx_packets", "rx_bytes", "wep_weak_iv_count",
+	"rx_duplicates", "rx_fragments", "rx_dropped",
+	"tx_packets", "tx_bytes", "tx_fragments",
+	"tx_filtered", "tx_retry_failed", "tx_retries",
+	"beacon_loss", "sta_state", "txrate", "rxrate", "signal",
+	"channel", "noise", "ch_time", "ch_time_busy",
+	"ch_time_ext_busy", "ch_time_rx", "ch_time_tx"
+};
+#define STA_STATS_LEN	ARRAY_SIZE(ieee80211_gstrings_sta_stats)
+
+static int ieee80211_get_et_sset_count(struct wiphy *wiphy,
+				       struct net_device *dev,
+				       int sset)
+{
+	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	int rv = 0;
+
+	if (sset == ETH_SS_STATS)
+		rv += STA_STATS_LEN;
+
+	rv += drv_get_et_sset_count(sdata, sset);
+
+	if (rv == 0)
+		return -EOPNOTSUPP;
+	return rv;
+}
+
+static void ieee80211_get_et_stats(struct wiphy *wiphy,
+				   struct net_device *dev,
+				   struct ethtool_stats *stats,
+				   u64 *data)
+{
+	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct sta_info *sta;
+	struct ieee80211_local *local = sdata->local;
+	struct station_info sinfo;
+	struct survey_info survey;
+	int i, q;
+#define STA_STATS_SURVEY_LEN 7
+
+	memset(data, 0, sizeof(u64) * STA_STATS_LEN);
+
+#define ADD_STA_STATS(sta)				\
+	do {						\
+		data[i++] += sta->rx_packets;		\
+		data[i++] += sta->rx_bytes;		\
+		data[i++] += sta->wep_weak_iv_count;	\
+		data[i++] += sta->num_duplicates;	\
+		data[i++] += sta->rx_fragments;		\
+		data[i++] += sta->rx_dropped;		\
+							\
+		data[i++] += sta->tx_packets;		\
+		data[i++] += sta->tx_bytes;		\
+		data[i++] += sta->tx_fragments;		\
+		data[i++] += sta->tx_filtered_count;	\
+		data[i++] += sta->tx_retry_failed;	\
+		data[i++] += sta->tx_retry_count;	\
+		data[i++] += sta->beacon_loss_count;	\
+	} while (0)
+
+	/* For Managed stations, find the single station based on BSSID
+	 * and use that.  For interface types, iterate through all available
+	 * stations and add stats for any station that is assigned to this
+	 * network device.
+	 */
+
+	rcu_read_lock();
+
+	if (sdata->vif.type == NL80211_IFTYPE_STATION) {
+		sta = sta_info_get_bss(sdata, sdata->u.mgd.bssid);
+
+		if (!(sta && !WARN_ON(sta->sdata->dev != dev)))
+			goto do_survey;
+
+		i = 0;
+		ADD_STA_STATS(sta);
+
+		data[i++] = sta->sta_state;
+
+		sinfo.filled = 0;
+		sta_set_sinfo(sta, &sinfo);
+
+		if (sinfo.filled | STATION_INFO_TX_BITRATE)
+			data[i] = 100000 *
+				cfg80211_calculate_bitrate(&sinfo.txrate);
+		i++;
+		if (sinfo.filled | STATION_INFO_RX_BITRATE)
+			data[i] = 100000 *
+				cfg80211_calculate_bitrate(&sinfo.rxrate);
+		i++;
+
+		if (sinfo.filled | STATION_INFO_SIGNAL_AVG)
+			data[i] = (u8)sinfo.signal_avg;
+		i++;
+	} else {
+		list_for_each_entry_rcu(sta, &local->sta_list, list) {
+			/* Make sure this station belongs to the proper dev */
+			if (sta->sdata->dev != dev)
+				continue;
+
+			i = 0;
+			ADD_STA_STATS(sta);
+		}
+	}
+
+do_survey:
+	i = STA_STATS_LEN - STA_STATS_SURVEY_LEN;
+	/* Get survey stats for current channel */
+	q = 0;
+	while (true) {
+		survey.filled = 0;
+		if (drv_get_survey(local, q, &survey) != 0) {
+			survey.filled = 0;
+			break;
+		}
+
+		if (survey.channel &&
+		    (local->oper_channel->center_freq ==
+		     survey.channel->center_freq))
+			break;
+		q++;
+	}
+
+	if (survey.filled)
+		data[i++] = survey.channel->center_freq;
+	else
+		data[i++] = 0;
+	if (survey.filled & SURVEY_INFO_NOISE_DBM)
+		data[i++] = (u8)survey.noise;
+	else
+		data[i++] = -1LL;
+	if (survey.filled & SURVEY_INFO_CHANNEL_TIME)
+		data[i++] = survey.channel_time;
+	else
+		data[i++] = -1LL;
+	if (survey.filled & SURVEY_INFO_CHANNEL_TIME_BUSY)
+		data[i++] = survey.channel_time_busy;
+	else
+		data[i++] = -1LL;
+	if (survey.filled & SURVEY_INFO_CHANNEL_TIME_EXT_BUSY)
+		data[i++] = survey.channel_time_ext_busy;
+	else
+		data[i++] = -1LL;
+	if (survey.filled & SURVEY_INFO_CHANNEL_TIME_RX)
+		data[i++] = survey.channel_time_rx;
+	else
+		data[i++] = -1LL;
+	if (survey.filled & SURVEY_INFO_CHANNEL_TIME_TX)
+		data[i++] = survey.channel_time_tx;
+	else
+		data[i++] = -1LL;
+
+	rcu_read_unlock();
+
+	if (WARN_ON(i != STA_STATS_LEN))
+		return;
+
+	drv_get_et_stats(sdata, stats, &(data[STA_STATS_LEN]));
+}
+
+static void ieee80211_get_et_strings(struct wiphy *wiphy,
+				     struct net_device *dev,
+				     u32 sset, u8 *data)
+{
+	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	int sz_sta_stats = 0;
+
+	if (sset == ETH_SS_STATS) {
+		sz_sta_stats = sizeof(ieee80211_gstrings_sta_stats);
+		memcpy(data, *ieee80211_gstrings_sta_stats, sz_sta_stats);
+	}
+	drv_get_et_strings(sdata, sset, &(data[sz_sta_stats]));
+}
 
 static int ieee80211_dump_station(struct wiphy *wiphy, struct net_device *dev,
 				 int idx, u8 *mac, struct station_info *sinfo)
@@ -1364,6 +1538,11 @@ static int ieee80211_update_mesh_config(struct wiphy *wiphy,
 			return -ENOTSUPP;
 		conf->rssi_threshold = nconf->rssi_threshold;
 	}
+	if (_chg_mesh_attr(NL80211_MESHCONF_HT_OPMODE, mask)) {
+		conf->ht_opmode = nconf->ht_opmode;
+		sdata->vif.bss_conf.ht_operation_mode = nconf->ht_opmode;
+		ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_HT);
+	}
 	return 0;
 }
 
@@ -2794,4 +2973,7 @@ struct cfg80211_ops mac80211_config_ops = {
 #ifdef CONFIG_PM
 	.set_wakeup = ieee80211_set_wakeup,
 #endif
+	.get_et_sset_count = ieee80211_get_et_sset_count,
+	.get_et_stats = ieee80211_get_et_stats,
+	.get_et_strings = ieee80211_get_et_strings,
 };

net/mac80211/driver-ops.h

@@ -35,6 +35,43 @@ static inline void drv_tx_frags(struct ieee80211_local *local,
 	local->ops->tx_frags(&local->hw, vif, sta, skbs);
 }
 
+static inline void drv_get_et_strings(struct ieee80211_sub_if_data *sdata,
+				      u32 sset, u8 *data)
+{
+	struct ieee80211_local *local = sdata->local;
+	if (local->ops->get_et_strings) {
+		trace_drv_get_et_strings(local, sset);
+		local->ops->get_et_strings(&local->hw, &sdata->vif, sset, data);
+		trace_drv_return_void(local);
+	}
+}
+
+static inline void drv_get_et_stats(struct ieee80211_sub_if_data *sdata,
+				    struct ethtool_stats *stats,
+				    u64 *data)
+{
+	struct ieee80211_local *local = sdata->local;
+	if (local->ops->get_et_stats) {
+		trace_drv_get_et_stats(local);
+		local->ops->get_et_stats(&local->hw, &sdata->vif, stats, data);
+		trace_drv_return_void(local);
+	}
+}
+
+static inline int drv_get_et_sset_count(struct ieee80211_sub_if_data *sdata,
+					int sset)
+{
+	struct ieee80211_local *local = sdata->local;
+	int rv = 0;
+	if (local->ops->get_et_sset_count) {
+		trace_drv_get_et_sset_count(local, sset);
+		rv = local->ops->get_et_sset_count(&local->hw, &sdata->vif,
+						   sset);
+		trace_drv_return_int(local, rv);
+	}
+	return rv;
+}
+
 static inline int drv_start(struct ieee80211_local *local)
 {
 	int ret;

net/mac80211/driver-trace.h

@@ -161,6 +161,21 @@ DEFINE_EVENT(local_only_evt, drv_start,
 	TP_ARGS(local)
 );
 
+DEFINE_EVENT(local_u32_evt, drv_get_et_strings,
+	     TP_PROTO(struct ieee80211_local *local, u32 sset),
+	     TP_ARGS(local, sset)
+);
+
+DEFINE_EVENT(local_u32_evt, drv_get_et_sset_count,
+	     TP_PROTO(struct ieee80211_local *local, u32 sset),
+	     TP_ARGS(local, sset)
+);
+
+DEFINE_EVENT(local_only_evt, drv_get_et_stats,
+	     TP_PROTO(struct ieee80211_local *local),
+	     TP_ARGS(local)
+);
+
 DEFINE_EVENT(local_only_evt, drv_suspend,
 	TP_PROTO(struct ieee80211_local *local),
 	TP_ARGS(local)

net/mac80211/ibss.c

@@ -164,7 +164,7 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
 		pos = ieee80211_ie_build_ht_cap(pos, &sband->ht_cap,
 						sband->ht_cap.cap);
 		pos = ieee80211_ie_build_ht_oper(pos, &sband->ht_cap,
-						 chan, channel_type);
+						 chan, channel_type, 0);
 	}
 
 	if (local->hw.queues >= IEEE80211_NUM_ACS) {

net/mac80211/ieee80211_i.h

@@ -1497,7 +1497,8 @@ u8 *ieee80211_ie_build_ht_cap(u8 *pos, struct ieee80211_sta_ht_cap *ht_cap,
 			      u16 cap);
 u8 *ieee80211_ie_build_ht_oper(u8 *pos, struct ieee80211_sta_ht_cap *ht_cap,
 			       struct ieee80211_channel *channel,
-			       enum nl80211_channel_type channel_type);
+			       enum nl80211_channel_type channel_type,
+			       u16 prot_mode);
 
 /* internal work items */
 void ieee80211_work_init(struct ieee80211_local *local);

net/mac80211/mesh.c

@@ -76,6 +76,7 @@ bool mesh_matches_local(struct ieee80211_sub_if_data *sdata,
 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
 	struct ieee80211_local *local = sdata->local;
 	u32 basic_rates = 0;
+	enum nl80211_channel_type sta_channel_type = NL80211_CHAN_NO_HT;
 
 	/*
 	 * As support for each feature is added, check for matching
@@ -102,10 +103,15 @@ bool mesh_matches_local(struct ieee80211_sub_if_data *sdata,
 	if (sdata->vif.bss_conf.basic_rates != basic_rates)
 		goto mismatch;
 
-	/* disallow peering with mismatched channel types for now */
+	if (ie->ht_operation)
+		sta_channel_type =
+			ieee80211_ht_oper_to_channel_type(ie->ht_operation);
+
+	/* Disallow HT40+/- mismatch */
 	if (ie->ht_operation &&
-	    (local->_oper_channel_type !=
-	     ieee80211_ht_oper_to_channel_type(ie->ht_operation)))
+	    local->_oper_channel_type > NL80211_CHAN_HT20 &&
+	    sta_channel_type > NL80211_CHAN_HT20 &&
+	    local->_oper_channel_type != sta_channel_type)
 		goto mismatch;
 
 	return true;
@@ -396,7 +402,8 @@ int mesh_add_ht_oper_ie(struct sk_buff *skb,
 		return -ENOMEM;
 
 	pos = skb_put(skb, 2 + sizeof(struct ieee80211_ht_operation));
-	ieee80211_ie_build_ht_oper(pos, ht_cap, channel, channel_type);
+	ieee80211_ie_build_ht_oper(pos, ht_cap, channel, channel_type,
+				   sdata->vif.bss_conf.ht_operation_mode);
 
 	return 0;
 }
@@ -588,12 +595,15 @@ void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata)
 	set_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags);
 	ieee80211_mesh_root_setup(ifmsh);
 	ieee80211_queue_work(&local->hw, &sdata->work);
+	sdata->vif.bss_conf.ht_operation_mode =
+				ifmsh->mshcfg.ht_opmode;
 	sdata->vif.bss_conf.beacon_int = MESH_DEFAULT_BEACON_INTERVAL;
 	sdata->vif.bss_conf.basic_rates =
 		ieee80211_mandatory_rates(sdata->local,
 					  sdata->local->hw.conf.channel->band);
 	ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON |
 						BSS_CHANGED_BEACON_ENABLED |
+						BSS_CHANGED_HT |
 						BSS_CHANGED_BASIC_RATES |
 						BSS_CHANGED_BEACON_INT);
 }

net/mac80211/mesh_plink.c

@@ -102,12 +102,70 @@ static struct sta_info *mesh_plink_alloc(struct ieee80211_sub_if_data *sdata,
 
 	set_sta_flag(sta, WLAN_STA_WME);
 
-	if (sta_info_insert(sta))
-		return NULL;
-
 	return sta;
 }
 
+/** mesh_set_ht_prot_mode - set correct HT protection mode
+ *
+ * Section 9.23.3.5 of IEEE 80211s standard describes the protection rules for
+ * HT mesh STA in a MBSS. Three HT protection modes are supported for now,
+ * non-HT mixed mode, 20MHz-protection and no-protection mode. non-HT mixed
+ * mode is selected if any non-HT peers are present in our MBSS.
+ * 20MHz-protection mode is selected if all peers in our 20/40MHz MBSS support
+ * HT and atleast one HT20 peer is present. Otherwise no-protection mode is
+ * selected.
+ */
+static u32 mesh_set_ht_prot_mode(struct ieee80211_sub_if_data *sdata)
+{
+	struct ieee80211_local *local = sdata->local;
+	struct sta_info *sta;
+	u32 changed = 0;
+	u16 ht_opmode;
+	bool non_ht_sta = false, ht20_sta = false;
+
+	if (local->_oper_channel_type == NL80211_CHAN_NO_HT)
+		return 0;
+
+	rcu_read_lock();
+	list_for_each_entry_rcu(sta, &local->sta_list, list) {
+		if (sdata == sta->sdata &&
+		    sta->plink_state == NL80211_PLINK_ESTAB) {
+			switch (sta->ch_type) {
+			case NL80211_CHAN_NO_HT:
+				mpl_dbg("mesh_plink %pM: nonHT sta (%pM) is present",
+					sdata->vif.addr, sta->sta.addr);
+				non_ht_sta = true;
+				goto out;
+			case NL80211_CHAN_HT20:
+				mpl_dbg("mesh_plink %pM: HT20 sta (%pM) is present",
+					sdata->vif.addr, sta->sta.addr);
+				ht20_sta = true;
+			default:
+				break;
+			}
+		}
+	}
+out:
+	rcu_read_unlock();
+
+	if (non_ht_sta)
+		ht_opmode = IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED;
+	else if (ht20_sta && local->_oper_channel_type > NL80211_CHAN_HT20)
+		ht_opmode = IEEE80211_HT_OP_MODE_PROTECTION_20MHZ;
+	else
+		ht_opmode = IEEE80211_HT_OP_MODE_PROTECTION_NONE;
+
+	if (sdata->vif.bss_conf.ht_operation_mode != ht_opmode) {
+		sdata->vif.bss_conf.ht_operation_mode = ht_opmode;
+		sdata->u.mesh.mshcfg.ht_opmode = ht_opmode;
+		changed = BSS_CHANGED_HT;
+		mpl_dbg("mesh_plink %pM: protection mode changed to %d",
+			sdata->vif.addr, ht_opmode);
+	}
+
+	return changed;
+}
+
 /**
  * __mesh_plink_deactivate - deactivate mesh peer link
  *
@@ -281,6 +339,7 @@ static struct sta_info *mesh_peer_init(struct ieee80211_sub_if_data *sdata,
 	struct ieee80211_supported_band *sband;
 	u32 rates, basic_rates = 0;
 	struct sta_info *sta;
+	bool insert = false;
 
 	sband = local->hw.wiphy->bands[band];
 	rates = ieee80211_sta_get_rates(local, elems, band, &basic_rates);
@@ -290,6 +349,7 @@ static struct sta_info *mesh_peer_init(struct ieee80211_sub_if_data *sdata,
 		sta = mesh_plink_alloc(sdata, addr);
 		if (!sta)
 			return NULL;
+		insert = true;
 	}
 
 	spin_lock_bh(&sta->lock);
@@ -303,9 +363,21 @@ static struct sta_info *mesh_peer_init(struct ieee80211_sub_if_data *sdata,
 	else
 		memset(&sta->sta.ht_cap, 0, sizeof(sta->sta.ht_cap));
 
+	if (elems->ht_operation) {
+		if (!(elems->ht_operation->ht_param &
+		      IEEE80211_HT_PARAM_CHAN_WIDTH_ANY))
+			sta->sta.ht_cap.cap &=
+					    ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
+		sta->ch_type =
+			ieee80211_ht_oper_to_channel_type(elems->ht_operation);
+	}
+
 	rate_control_rate_init(sta);
 	spin_unlock_bh(&sta->lock);
 
+	if (insert && sta_info_insert(sta))
+		return NULL;
+
 	return sta;
 }
 
@@ -487,9 +559,10 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 	enum plink_event event;
 	enum ieee80211_self_protected_actioncode ftype;
 	size_t baselen;
-	bool deactivated, matches_local = true;
+	bool matches_local = true;
 	u8 ie_len;
 	u8 *baseaddr;
+	u32 changed = 0;
 	__le16 plid, llid, reason;
 #ifdef CONFIG_MAC80211_VERBOSE_MPL_DEBUG
 	static const char *mplstates[] = {
@@ -775,7 +848,8 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 			sta->plink_state = NL80211_PLINK_ESTAB;
 			spin_unlock_bh(&sta->lock);
 			mesh_plink_inc_estab_count(sdata);
-			ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON);
+			changed |= mesh_set_ht_prot_mode(sdata);
+			changed |= BSS_CHANGED_BEACON;
 			mpl_dbg("Mesh plink with %pM ESTABLISHED\n",
 				sta->sta.addr);
 			break;
@@ -810,7 +884,8 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 			sta->plink_state = NL80211_PLINK_ESTAB;
 			spin_unlock_bh(&sta->lock);
 			mesh_plink_inc_estab_count(sdata);
-			ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON);
+			changed |= mesh_set_ht_prot_mode(sdata);
+			changed |= BSS_CHANGED_BEACON;
 			mpl_dbg("Mesh plink with %pM ESTABLISHED\n",
 				sta->sta.addr);
 			mesh_plink_frame_tx(sdata,
@@ -828,13 +903,13 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 		case CLS_ACPT:
 			reason = cpu_to_le16(WLAN_REASON_MESH_CLOSE);
 			sta->reason = reason;
-			deactivated = __mesh_plink_deactivate(sta);
+			__mesh_plink_deactivate(sta);
 			sta->plink_state = NL80211_PLINK_HOLDING;
 			llid = sta->llid;
 			mod_plink_timer(sta, dot11MeshHoldingTimeout(sdata));
 			spin_unlock_bh(&sta->lock);
-			if (deactivated)
-				ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON);
+			changed |= mesh_set_ht_prot_mode(sdata);
+			changed |= BSS_CHANGED_BEACON;
 			mesh_plink_frame_tx(sdata, WLAN_SP_MESH_PEERING_CLOSE,
 					    sta->sta.addr, llid, plid, reason);
 			break;
@@ -881,4 +956,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 	}
 
 	rcu_read_unlock();
+
+	if (changed)
+		ieee80211_bss_info_change_notify(sdata, changed);
 }

net/mac80211/mlme.c

@@ -210,7 +210,7 @@ static u32 ieee80211_config_ht_tx(struct ieee80211_sub_if_data *sdata,
 		disable_40 = true;
 
 	if (sta && (!reconfig ||
-		    (disable_40 != !!(sta->sta.ht_cap.cap &
+		    (disable_40 != !(sta->sta.ht_cap.cap &
 					IEEE80211_HT_CAP_SUP_WIDTH_20_40)))) {
 
 		if (disable_40)

net/mac80211/sta_info.h

@@ -362,6 +362,7 @@ struct sta_info {
 	struct timer_list plink_timer;
 	s64 t_offset;
 	s64 t_offset_setpoint;
+	enum nl80211_channel_type ch_type;
 #endif
 
 #ifdef CONFIG_MAC80211_DEBUGFS

net/mac80211/util.c

@@ -1663,7 +1663,8 @@ u8 *ieee80211_ie_build_ht_cap(u8 *pos, struct ieee80211_sta_ht_cap *ht_cap,
 
 u8 *ieee80211_ie_build_ht_oper(u8 *pos, struct ieee80211_sta_ht_cap *ht_cap,
 			       struct ieee80211_channel *channel,
-			       enum nl80211_channel_type channel_type)
+			       enum nl80211_channel_type channel_type,
+			       u16 prot_mode)
 {
 	struct ieee80211_ht_operation *ht_oper;
 	/* Build HT Information */
@@ -1689,11 +1690,7 @@ u8 *ieee80211_ie_build_ht_oper(u8 *pos, struct ieee80211_sta_ht_cap *ht_cap,
 	    channel_type != NL80211_CHAN_HT20)
 		ht_oper->ht_param |= IEEE80211_HT_PARAM_CHAN_WIDTH_ANY;
 
-	/*
-	 * Note: According to 802.11n-2009 9.13.3.1, HT Protection field and
-	 * RIFS Mode are reserved in IBSS mode, therefore keep them at 0
-	 */
-	ht_oper->operation_mode = 0x0000;
+	ht_oper->operation_mode = cpu_to_le16(prot_mode);
 	ht_oper->stbc_param = 0x0000;
 
 	/* It seems that Basic MCS set and Supported MCS set

net/wireless/ethtool.c

@@ -68,6 +68,32 @@ static int cfg80211_set_ringparam(struct net_device *dev,
 	return -ENOTSUPP;
 }
 
+static int cfg80211_get_sset_count(struct net_device *dev, int sset)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
+	if (rdev->ops->get_et_sset_count)
+		return rdev->ops->get_et_sset_count(wdev->wiphy, dev, sset);
+	return -EOPNOTSUPP;
+}
+
+static void cfg80211_get_stats(struct net_device *dev,
+			       struct ethtool_stats *stats, u64 *data)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
+	if (rdev->ops->get_et_stats)
+		rdev->ops->get_et_stats(wdev->wiphy, dev, stats, data);
+}
+
+static void cfg80211_get_strings(struct net_device *dev, u32 sset, u8 *data)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
+	if (rdev->ops->get_et_strings)
+		rdev->ops->get_et_strings(wdev->wiphy, dev, sset, data);
+}
+
 const struct ethtool_ops cfg80211_ethtool_ops = {
 	.get_drvinfo = cfg80211_get_drvinfo,
 	.get_regs_len = cfg80211_get_regs_len,
@@ -75,4 +101,7 @@ const struct ethtool_ops cfg80211_ethtool_ops = {
 	.get_link = ethtool_op_get_link,
 	.get_ringparam = cfg80211_get_ringparam,
 	.set_ringparam = cfg80211_set_ringparam,
+	.get_strings = cfg80211_get_strings,
+	.get_ethtool_stats = cfg80211_get_stats,
+	.get_sset_count = cfg80211_get_sset_count,
 };

net/wireless/mesh.c

@@ -61,6 +61,7 @@ const struct mesh_config default_mesh_config = {
 	.dot11MeshGateAnnouncementProtocol = false,
 	.dot11MeshForwarding = true,
 	.rssi_threshold = MESH_RSSI_THRESHOLD,
+	.ht_opmode = IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED,
 };
 
 const struct mesh_setup default_mesh_setup = {

net/wireless/nl80211.c

@@ -3390,7 +3390,9 @@ static int nl80211_get_mesh_config(struct sk_buff *skb,
 	    nla_put_u8(msg, NL80211_MESHCONF_FORWARDING,
 		       cur_params.dot11MeshForwarding) ||
 	    nla_put_u32(msg, NL80211_MESHCONF_RSSI_THRESHOLD,
-			cur_params.rssi_threshold))
+			cur_params.rssi_threshold) ||
+	    nla_put_u32(msg, NL80211_MESHCONF_HT_OPMODE,
+			cur_params.ht_opmode))
 		goto nla_put_failure;
 	nla_nest_end(msg, pinfoattr);
 	genlmsg_end(msg, hdr);
@@ -3426,6 +3428,7 @@ static const struct nla_policy nl80211_meshconf_params_policy[NL80211_MESHCONF_A
 	[NL80211_MESHCONF_GATE_ANNOUNCEMENTS] = { .type = NLA_U8 },
 	[NL80211_MESHCONF_FORWARDING] = { .type = NLA_U8 },
 	[NL80211_MESHCONF_RSSI_THRESHOLD] = { .type = NLA_U32},
+	[NL80211_MESHCONF_HT_OPMODE] = { .type = NLA_U16},
 };
 
 static const struct nla_policy
@@ -3523,6 +3526,8 @@ do {\
 			mask, NL80211_MESHCONF_FORWARDING, nla_get_u8);
 	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, rssi_threshold,
 			mask, NL80211_MESHCONF_RSSI_THRESHOLD, nla_get_u32);
+	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, ht_opmode,
+			mask, NL80211_MESHCONF_HT_OPMODE, nla_get_u16);
 	if (mask_out)
 		*mask_out = mask;
 

net/wireless/scan.c

@@ -378,7 +378,11 @@ static int cmp_bss_core(struct cfg80211_bss *a,
 			       b->len_information_elements);
 	}
 
-	return compare_ether_addr(a->bssid, b->bssid);
+	/*
+	 * we can't use compare_ether_addr here since we need a < > operator.
+	 * The binary return value of compare_ether_addr isn't enough
+	 */
+	return memcmp(a->bssid, b->bssid, sizeof(a->bssid));
 }
 
 static int cmp_bss(struct cfg80211_bss *a,