Merge ../scsi-misc-2.6

Conflicts:

	drivers/scsi/nsp32.c
	drivers/scsi/pcmcia/nsp_cs.c

Removal of randomness flag conflicts with SA_ -> IRQF_ global
replacement.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Documentation/scsi/ChangeLog.megaraid_sas

@@ -1,4 +1,20 @@
 
+1 Release Date    : Sun May 14 22:49:52 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com>
+2 Current Version : 00.00.03.01
+3 Older Version   : 00.00.02.04
+
+i.	Added support for ZCR controller.
+
+		New device id 0x413 added.
+
+ii.	Bug fix : Disable controller interrupt before firing INIT cmd to FW.
+
+		Interrupt is enabled after required initialization is over.
+		This is done to ensure that driver is ready to handle interrupts when
+		it is generated by the controller.
+
+		-Sumant Patro <Sumant.Patro@lsil.com>
+
 1 Release Date    : Wed Feb 03 14:31:44 PST 2006 - Sumant Patro <Sumant.Patro@lsil.com>
 2 Current Version : 00.00.02.04
 3 Older Version   : 00.00.02.04 

drivers/infiniband/ulp/iser/iscsi_iser.c

@@ -437,159 +437,50 @@ iscsi_iser_session_create(struct iscsi_transport *iscsit,
 }
 
 static int
-iscsi_iser_conn_set_param(struct iscsi_cls_conn *cls_conn,
-			  enum iscsi_param param, uint32_t value)
+iscsi_iser_set_param(struct iscsi_cls_conn *cls_conn,
+		     enum iscsi_param param, char *buf, int buflen)
 {
-	struct iscsi_conn *conn = cls_conn->dd_data;
-	struct iscsi_session *session = conn->session;
-
-	spin_lock_bh(&session->lock);
-	if (conn->c_stage != ISCSI_CONN_INITIAL_STAGE &&
-	    conn->stop_stage != STOP_CONN_RECOVER) {
-		printk(KERN_ERR "iscsi_iser: can not change parameter [%d]\n",
-		       param);
-		spin_unlock_bh(&session->lock);
-		return 0;
-	}
-	spin_unlock_bh(&session->lock);
+	int value;
 
 	switch (param) {
 	case ISCSI_PARAM_MAX_RECV_DLENGTH:
 		/* TBD */
 		break;
-	case ISCSI_PARAM_MAX_XMIT_DLENGTH:
-		conn->max_xmit_dlength =  value;
-		break;
 	case ISCSI_PARAM_HDRDGST_EN:
+		sscanf(buf, "%d", &value);
 		if (value) {
 			printk(KERN_ERR "DataDigest wasn't negotiated to None");
 			return -EPROTO;
 		}
 		break;
 	case ISCSI_PARAM_DATADGST_EN:
+		sscanf(buf, "%d", &value);
 		if (value) {
 			printk(KERN_ERR "DataDigest wasn't negotiated to None");
 			return -EPROTO;
 		}
 		break;
-	case ISCSI_PARAM_INITIAL_R2T_EN:
-		session->initial_r2t_en = value;
-		break;
-	case ISCSI_PARAM_IMM_DATA_EN:
-		session->imm_data_en = value;
-		break;
-	case ISCSI_PARAM_FIRST_BURST:
-		session->first_burst = value;
-		break;
-	case ISCSI_PARAM_MAX_BURST:
-		session->max_burst = value;
-		break;
-	case ISCSI_PARAM_PDU_INORDER_EN:
-		session->pdu_inorder_en = value;
-		break;
-	case ISCSI_PARAM_DATASEQ_INORDER_EN:
-		session->dataseq_inorder_en = value;
-		break;
-	case ISCSI_PARAM_ERL:
-		session->erl = value;
-		break;
 	case ISCSI_PARAM_IFMARKER_EN:
+		sscanf(buf, "%d", &value);
 		if (value) {
 			printk(KERN_ERR "IFMarker wasn't negotiated to No");
 			return -EPROTO;
 		}
 		break;
 	case ISCSI_PARAM_OFMARKER_EN:
+		sscanf(buf, "%d", &value);
 		if (value) {
 			printk(KERN_ERR "OFMarker wasn't negotiated to No");
 			return -EPROTO;
 		}
 		break;
 	default:
-		break;
-	}
-
-	return 0;
-}
-
-static int
-iscsi_iser_session_get_param(struct iscsi_cls_session *cls_session,
-			     enum iscsi_param param, uint32_t *value)
-{
-	struct Scsi_Host *shost = iscsi_session_to_shost(cls_session);
-	struct iscsi_session *session = iscsi_hostdata(shost->hostdata);
-
-	switch (param) {
-	case ISCSI_PARAM_INITIAL_R2T_EN:
-		*value = session->initial_r2t_en;
-		break;
-	case ISCSI_PARAM_MAX_R2T:
-		*value = session->max_r2t;
-		break;
-	case ISCSI_PARAM_IMM_DATA_EN:
-		*value = session->imm_data_en;
-		break;
-	case ISCSI_PARAM_FIRST_BURST:
-		*value = session->first_burst;
-		break;
-	case ISCSI_PARAM_MAX_BURST:
-		*value = session->max_burst;
-		break;
-	case ISCSI_PARAM_PDU_INORDER_EN:
-		*value = session->pdu_inorder_en;
-		break;
-	case ISCSI_PARAM_DATASEQ_INORDER_EN:
-		*value = session->dataseq_inorder_en;
-		break;
-	case ISCSI_PARAM_ERL:
-		*value = session->erl;
-		break;
-	case ISCSI_PARAM_IFMARKER_EN:
-		*value = 0;
-		break;
-	case ISCSI_PARAM_OFMARKER_EN:
-		*value = 0;
-		break;
-	default:
-		return ISCSI_ERR_PARAM_NOT_FOUND;
-	}
-
-	return 0;
-}
-
-static int
-iscsi_iser_conn_get_param(struct iscsi_cls_conn *cls_conn,
-			  enum iscsi_param param, uint32_t *value)
-{
-	struct iscsi_conn *conn = cls_conn->dd_data;
-
-	switch(param) {
-	case ISCSI_PARAM_MAX_RECV_DLENGTH:
-		*value = conn->max_recv_dlength;
-		break;
-	case ISCSI_PARAM_MAX_XMIT_DLENGTH:
-		*value = conn->max_xmit_dlength;
-		break;
-	case ISCSI_PARAM_HDRDGST_EN:
-		*value = 0;
-		break;
-	case ISCSI_PARAM_DATADGST_EN:
-		*value = 0;
-		break;
-	/*case ISCSI_PARAM_TARGET_RECV_DLENGTH:
-		*value = conn->target_recv_dlength;
-		break;
-	case ISCSI_PARAM_INITIATOR_RECV_DLENGTH:
-		*value = conn->initiator_recv_dlength;
-		break;*/
-	default:
-		return ISCSI_ERR_PARAM_NOT_FOUND;
+		return iscsi_set_param(cls_conn, param, buf, buflen);
 	}
 
 	return 0;
 }
 
-
 static void
 iscsi_iser_conn_get_stats(struct iscsi_cls_conn *cls_conn, struct iscsi_stats *stats)
 {
@@ -701,7 +592,12 @@ static struct iscsi_transport iscsi_iser_transport = {
 				  ISCSI_FIRST_BURST |
 				  ISCSI_MAX_BURST |
 				  ISCSI_PDU_INORDER_EN |
-				  ISCSI_DATASEQ_INORDER_EN,
+				  ISCSI_DATASEQ_INORDER_EN |
+				  ISCSI_EXP_STATSN |
+				  ISCSI_PERSISTENT_PORT |
+				  ISCSI_PERSISTENT_ADDRESS |
+				  ISCSI_TARGET_NAME |
+				  ISCSI_TPGT,
 	.host_template          = &iscsi_iser_sht,
 	.conndata_size		= sizeof(struct iscsi_conn),
 	.max_lun                = ISCSI_ISER_MAX_LUN,
@@ -713,9 +609,9 @@ static struct iscsi_transport iscsi_iser_transport = {
 	.create_conn            = iscsi_iser_conn_create,
 	.bind_conn              = iscsi_iser_conn_bind,
 	.destroy_conn           = iscsi_iser_conn_destroy,
-	.set_param              = iscsi_iser_conn_set_param,
-	.get_conn_param		= iscsi_iser_conn_get_param,
-	.get_session_param	= iscsi_iser_session_get_param,
+	.set_param              = iscsi_iser_set_param,
+	.get_conn_param		= iscsi_conn_get_param,
+	.get_session_param	= iscsi_session_get_param,
 	.start_conn             = iscsi_iser_conn_start,
 	.stop_conn              = iscsi_conn_stop,
 	/* these are called as part of conn recovery */

drivers/message/fusion/Makefile

@@ -33,6 +33,11 @@
 #  For mptfc:
 #CFLAGS_mptfc.o += -DMPT_DEBUG_FC
 
+#  For mptsas:
+#CFLAGS_mptsas.o += -DMPT_DEBUG_SAS
+#CFLAGS_mptsas.o += -DMPT_DEBUG_SAS_WIDE
+
+
 #=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-} LSI_LOGIC
 
 obj-$(CONFIG_FUSION_SPI)	+= mptbase.o mptscsih.o mptspi.o

drivers/message/fusion/lsi/fc_log.h

@@ -1,89 +0,0 @@
-/*
- *  Copyright (c) 2000-2001 LSI Logic Corporation. All rights reserved.
- *
- *  NAME:           fc_log.h
- *  SUMMARY:        MPI IocLogInfo definitions for the SYMFC9xx chips
- *  DESCRIPTION:    Contains the enumerated list of values that may be returned
- *                  in the IOCLogInfo field of a MPI Default Reply Message.
- *
- *  CREATION DATE:  6/02/2000
- *  ID:             $Id: fc_log.h,v 4.6 2001/07/26 14:41:33 sschremm Exp $
- */
-
-
-/*
- * MpiIocLogInfo_t enum
- *
- * These 32 bit values are used in the IOCLogInfo field of the MPI reply
- * messages.
- * The value is 0xabcccccc where
- *          a = The type of log info as per the MPI spec. Since these codes are
- *              all for Fibre Channel this value will always be 2.
- *          b = Specifies a subclass of the firmware where
- *                  0 = FCP Initiator
- *                  1 = FCP Target
- *                  2 = LAN
- *                  3 = MPI Message Layer
- *                  4 = FC Link
- *                  5 = Context Manager
- *                  6 = Invalid Field Offset
- *                  7 = State Change Info
- *                  all others are reserved for future use
- *          c = A specific value within the subclass.
- *
- * NOTE: Any new values should be added to the end of each subclass so that the
- *       codes remain consistent across firmware releases.
- */
-typedef enum _MpiIocLogInfoFc
-{
-    MPI_IOCLOGINFO_FC_INIT_BASE                     = 0x20000000,
-    MPI_IOCLOGINFO_FC_INIT_ERROR_OUT_OF_ORDER_FRAME = 0x20000001, /* received an out of order frame - unsupported */
-    MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_START_OF_FRAME = 0x20000002, /* Bad Rx Frame, bad start of frame primative */
-    MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_END_OF_FRAME   = 0x20000003, /* Bad Rx Frame, bad end of frame primative */
-    MPI_IOCLOGINFO_FC_INIT_ERROR_OVER_RUN           = 0x20000004, /* Bad Rx Frame, overrun */
-    MPI_IOCLOGINFO_FC_INIT_ERROR_RX_OTHER           = 0x20000005, /* Other errors caught by IOC which require retries */
-    MPI_IOCLOGINFO_FC_INIT_ERROR_SUBPROC_DEAD       = 0x20000006, /* Main processor could not initialize sub-processor */
-    MPI_IOCLOGINFO_FC_INIT_ERROR_RX_OVERRUN         = 0x20000007, /* Scatter Gather overrun  */
-    MPI_IOCLOGINFO_FC_INIT_ERROR_RX_BAD_STATUS      = 0x20000008, /* Receiver detected context mismatch via invalid header */
-    MPI_IOCLOGINFO_FC_INIT_ERROR_RX_UNEXPECTED_FRAME= 0x20000009, /* CtxMgr detected unsupported frame type  */
-    MPI_IOCLOGINFO_FC_INIT_ERROR_LINK_FAILURE       = 0x2000000A, /* Link failure occurred  */
-    MPI_IOCLOGINFO_FC_INIT_ERROR_TX_TIMEOUT         = 0x2000000B, /* Transmitter timeout error */
-
-    MPI_IOCLOGINFO_FC_TARGET_BASE                   = 0x21000000,
-    MPI_IOCLOGINFO_FC_TARGET_NO_PDISC               = 0x21000001, /* not sent because we are waiting for a PDISC from the initiator */
-    MPI_IOCLOGINFO_FC_TARGET_NO_LOGIN               = 0x21000002, /* not sent because we are not logged in to the remote node */
-    MPI_IOCLOGINFO_FC_TARGET_DOAR_KILLED_BY_LIP     = 0x21000003, /* Data Out, Auto Response, not sent due to a LIP */
-    MPI_IOCLOGINFO_FC_TARGET_DIAR_KILLED_BY_LIP     = 0x21000004, /* Data In, Auto Response, not sent due to a LIP */
-    MPI_IOCLOGINFO_FC_TARGET_DIAR_MISSING_DATA      = 0x21000005, /* Data In, Auto Response, missing data frames */
-    MPI_IOCLOGINFO_FC_TARGET_DONR_KILLED_BY_LIP     = 0x21000006, /* Data Out, No Response, not sent due to a LIP */
-    MPI_IOCLOGINFO_FC_TARGET_WRSP_KILLED_BY_LIP     = 0x21000007, /* Auto-response after a write not sent due to a LIP */
-    MPI_IOCLOGINFO_FC_TARGET_DINR_KILLED_BY_LIP     = 0x21000008, /* Data In, No Response, not completed due to a LIP */
-    MPI_IOCLOGINFO_FC_TARGET_DINR_MISSING_DATA      = 0x21000009, /* Data In, No Response, missing data frames */
-    MPI_IOCLOGINFO_FC_TARGET_MRSP_KILLED_BY_LIP     = 0x2100000a, /* Manual Response not sent due to a LIP */
-    MPI_IOCLOGINFO_FC_TARGET_NO_CLASS_3             = 0x2100000b, /* not sent because remote node does not support Class 3 */
-    MPI_IOCLOGINFO_FC_TARGET_LOGIN_NOT_VALID        = 0x2100000c, /* not sent because login to remote node not validated */
-    MPI_IOCLOGINFO_FC_TARGET_FROM_OUTBOUND          = 0x2100000e, /* cleared from the outbound queue after a logout */
-    MPI_IOCLOGINFO_FC_TARGET_WAITING_FOR_DATA_IN    = 0x2100000f, /* cleared waiting for data after a logout */
-
-    MPI_IOCLOGINFO_FC_LAN_BASE                      = 0x22000000,
-    MPI_IOCLOGINFO_FC_LAN_TRANS_SGL_MISSING         = 0x22000001, /* Transaction Context Sgl Missing */
-    MPI_IOCLOGINFO_FC_LAN_TRANS_WRONG_PLACE         = 0x22000002, /* Transaction Context found before an EOB */
-    MPI_IOCLOGINFO_FC_LAN_TRANS_RES_BITS_SET        = 0x22000003, /* Transaction Context value has reserved bits set */
-    MPI_IOCLOGINFO_FC_LAN_WRONG_SGL_FLAG            = 0x22000004, /* Invalid SGL Flags */
-
-    MPI_IOCLOGINFO_FC_MSG_BASE                      = 0x23000000,
-
-    MPI_IOCLOGINFO_FC_LINK_BASE                     = 0x24000000,
-    MPI_IOCLOGINFO_FC_LINK_LOOP_INIT_TIMEOUT        = 0x24000001, /* Loop initialization timed out */
-    MPI_IOCLOGINFO_FC_LINK_ALREADY_INITIALIZED      = 0x24000002, /* Another system controller already initialized the loop */
-    MPI_IOCLOGINFO_FC_LINK_LINK_NOT_ESTABLISHED     = 0x24000003, /* Not synchronized to signal or still negotiating (possible cable problem) */
-    MPI_IOCLOGINFO_FC_LINK_CRC_ERROR                = 0x24000004, /* CRC check detected error on received frame */
-
-    MPI_IOCLOGINFO_FC_CTX_BASE                      = 0x25000000,
-
-    MPI_IOCLOGINFO_FC_INVALID_FIELD_BYTE_OFFSET     = 0x26000000, /* The lower 24 bits give the byte offset of the field in the request message that is invalid */
-    MPI_IOCLOGINFO_FC_INVALID_FIELD_MAX_OFFSET      = 0x26ffffff,
-
-    MPI_IOCLOGINFO_FC_STATE_CHANGE                  = 0x27000000  /* The lower 24 bits give additional information concerning state change */
-
-} MpiIocLogInfoFc_t;

drivers/message/fusion/lsi/mpi.h

@@ -6,7 +6,7 @@
  *          Title:  MPI Message independent structures and definitions
  *  Creation Date:  July 27, 2000
  *
- *    mpi.h Version:  01.05.10
+ *    mpi.h Version:  01.05.11
  *
  *  Version History
  *  ---------------
@@ -76,6 +76,7 @@
  *                      Added EEDP IOCStatus codes.
  *  08-03-05  01.05.09  Bumped MPI_HEADER_VERSION_UNIT.
  *  08-30-05  01.05.10  Added 2 new IOCStatus codes for Target.
+ *  03-27-06  01.05.11  Bumped MPI_HEADER_VERSION_UNIT.
  *  --------------------------------------------------------------------------
  */
 
@@ -106,7 +107,7 @@
 /* Note: The major versions of 0xe0 through 0xff are reserved */
 
 /* versioning for this MPI header set */
-#define MPI_HEADER_VERSION_UNIT             (0x0C)
+#define MPI_HEADER_VERSION_UNIT             (0x0D)
 #define MPI_HEADER_VERSION_DEV              (0x00)
 #define MPI_HEADER_VERSION_UNIT_MASK        (0xFF00)
 #define MPI_HEADER_VERSION_UNIT_SHIFT       (8)

drivers/message/fusion/lsi/mpi_cnfg.h

@@ -6,7 +6,7 @@
  *          Title:  MPI Config message, structures, and Pages
  *  Creation Date:  July 27, 2000
  *
- *    mpi_cnfg.h Version:  01.05.11
+ *    mpi_cnfg.h Version:  01.05.12
  *
  *  Version History
  *  ---------------
@@ -266,6 +266,16 @@
  *                      Added postpone SATA Init bit to SAS IO Unit Page 1
  *                      ControlFlags.
  *                      Changed LogEntry format for Log Page 0.
+ *  03-27-06  01.05.12  Added two new Flags defines for Manufacturing Page 4.
+ *                      Added Manufacturing Page 7.
+ *                      Added MPI_IOCPAGE2_CAP_FLAGS_RAID_64_BIT_ADDRESSING.
+ *                      Added IOC Page 6.
+ *                      Added PrevBootDeviceForm field to CONFIG_PAGE_BIOS_2.
+ *                      Added MaxLBAHigh field to RAID Volume Page 0.
+ *                      Added Nvdata version fields to SAS IO Unit Page 0.
+ *                      Added AdditionalControlFlags, MaxTargetPortConnectTime,
+ *                      ReportDeviceMissingDelay, and IODeviceMissingDelay
+ *                      fields to SAS IO Unit Page 1.
  *  --------------------------------------------------------------------------
  */
 
@@ -631,9 +641,11 @@ typedef struct _CONFIG_PAGE_MANUFACTURING_4
 } CONFIG_PAGE_MANUFACTURING_4, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_4,
   ManufacturingPage4_t, MPI_POINTER pManufacturingPage4_t;
 
-#define MPI_MANUFACTURING4_PAGEVERSION                  (0x03)
+#define MPI_MANUFACTURING4_PAGEVERSION                  (0x04)
 
 /* defines for the Flags field */
+#define MPI_MANPAGE4_FORCE_BAD_BLOCK_TABLE              (0x80)
+#define MPI_MANPAGE4_FORCE_OFFLINE_FAILOVER             (0x40)
 #define MPI_MANPAGE4_IME_DISABLE                        (0x20)
 #define MPI_MANPAGE4_IM_DISABLE                         (0x10)
 #define MPI_MANPAGE4_IS_DISABLE                         (0x08)
@@ -668,6 +680,66 @@ typedef struct _CONFIG_PAGE_MANUFACTURING_6
 #define MPI_MANUFACTURING6_PAGEVERSION                  (0x00)
 
 
+typedef struct _MPI_MANPAGE7_CONNECTOR_INFO
+{
+    U32                         Pinout;                 /* 00h */
+    U8                          Connector[16];          /* 04h */
+    U8                          Location;               /* 14h */
+    U8                          Reserved1;              /* 15h */
+    U16                         Slot;                   /* 16h */
+    U32                         Reserved2;              /* 18h */
+} MPI_MANPAGE7_CONNECTOR_INFO, MPI_POINTER PTR_MPI_MANPAGE7_CONNECTOR_INFO,
+  MpiManPage7ConnectorInfo_t, MPI_POINTER pMpiManPage7ConnectorInfo_t;
+
+/* defines for the Pinout field */
+#define MPI_MANPAGE7_PINOUT_SFF_8484_L4                 (0x00080000)
+#define MPI_MANPAGE7_PINOUT_SFF_8484_L3                 (0x00040000)
+#define MPI_MANPAGE7_PINOUT_SFF_8484_L2                 (0x00020000)
+#define MPI_MANPAGE7_PINOUT_SFF_8484_L1                 (0x00010000)
+#define MPI_MANPAGE7_PINOUT_SFF_8470_L4                 (0x00000800)
+#define MPI_MANPAGE7_PINOUT_SFF_8470_L3                 (0x00000400)
+#define MPI_MANPAGE7_PINOUT_SFF_8470_L2                 (0x00000200)
+#define MPI_MANPAGE7_PINOUT_SFF_8470_L1                 (0x00000100)
+#define MPI_MANPAGE7_PINOUT_SFF_8482                    (0x00000002)
+#define MPI_MANPAGE7_PINOUT_CONNECTION_UNKNOWN          (0x00000001)
+
+/* defines for the Location field */
+#define MPI_MANPAGE7_LOCATION_UNKNOWN                   (0x01)
+#define MPI_MANPAGE7_LOCATION_INTERNAL                  (0x02)
+#define MPI_MANPAGE7_LOCATION_EXTERNAL                  (0x04)
+#define MPI_MANPAGE7_LOCATION_SWITCHABLE                (0x08)
+#define MPI_MANPAGE7_LOCATION_AUTO                      (0x10)
+#define MPI_MANPAGE7_LOCATION_NOT_PRESENT               (0x20)
+#define MPI_MANPAGE7_LOCATION_NOT_CONNECTED             (0x80)
+
+/*
+ * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ * one and check NumPhys at runtime.
+ */
+#ifndef MPI_MANPAGE7_CONNECTOR_INFO_MAX
+#define MPI_MANPAGE7_CONNECTOR_INFO_MAX   (1)
+#endif
+
+typedef struct _CONFIG_PAGE_MANUFACTURING_7
+{
+    CONFIG_PAGE_HEADER          Header;                 /* 00h */
+    U32                         Reserved1;              /* 04h */
+    U32                         Reserved2;              /* 08h */
+    U32                         Flags;                  /* 0Ch */
+    U8                          EnclosureName[16];      /* 10h */
+    U8                          NumPhys;                /* 20h */
+    U8                          Reserved3;              /* 21h */
+    U16                         Reserved4;              /* 22h */
+    MPI_MANPAGE7_CONNECTOR_INFO ConnectorInfo[MPI_MANPAGE7_CONNECTOR_INFO_MAX]; /* 24h */
+} CONFIG_PAGE_MANUFACTURING_7, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_7,
+  ManufacturingPage7_t, MPI_POINTER pManufacturingPage7_t;
+
+#define MPI_MANUFACTURING7_PAGEVERSION                  (0x00)
+
+/* defines for the Flags field */
+#define MPI_MANPAGE7_FLAG_USE_SLOT_INFO                 (0x00000001)
+
+
 /****************************************************************************
 *   IO Unit Config Pages
 ****************************************************************************/
@@ -867,7 +939,7 @@ typedef struct _CONFIG_PAGE_IOC_2
 } CONFIG_PAGE_IOC_2, MPI_POINTER PTR_CONFIG_PAGE_IOC_2,
   IOCPage2_t, MPI_POINTER pIOCPage2_t;
 
-#define MPI_IOCPAGE2_PAGEVERSION                        (0x03)
+#define MPI_IOCPAGE2_PAGEVERSION                        (0x04)
 
 /* IOC Page 2 Capabilities flags */
 
@@ -878,6 +950,7 @@ typedef struct _CONFIG_PAGE_IOC_2
 #define MPI_IOCPAGE2_CAP_FLAGS_RAID_6_SUPPORT           (0x00000010)
 #define MPI_IOCPAGE2_CAP_FLAGS_RAID_10_SUPPORT          (0x00000020)
 #define MPI_IOCPAGE2_CAP_FLAGS_RAID_50_SUPPORT          (0x00000040)
+#define MPI_IOCPAGE2_CAP_FLAGS_RAID_64_BIT_ADDRESSING   (0x10000000)
 #define MPI_IOCPAGE2_CAP_FLAGS_SES_SUPPORT              (0x20000000)
 #define MPI_IOCPAGE2_CAP_FLAGS_SAFTE_SUPPORT            (0x40000000)
 #define MPI_IOCPAGE2_CAP_FLAGS_CROSS_CHANNEL_SUPPORT    (0x80000000)
@@ -975,6 +1048,44 @@ typedef struct _CONFIG_PAGE_IOC_5
 
 #define MPI_IOCPAGE5_PAGEVERSION                        (0x00)
 
+typedef struct _CONFIG_PAGE_IOC_6
+{
+    CONFIG_PAGE_HEADER          Header;                         /* 00h */
+    U32                         CapabilitiesFlags;              /* 04h */
+    U8                          MaxDrivesIS;                    /* 08h */
+    U8                          MaxDrivesIM;                    /* 09h */
+    U8                          MaxDrivesIME;                   /* 0Ah */
+    U8                          Reserved1;                      /* 0Bh */
+    U8                          MinDrivesIS;                    /* 0Ch */
+    U8                          MinDrivesIM;                    /* 0Dh */
+    U8                          MinDrivesIME;                   /* 0Eh */
+    U8                          Reserved2;                      /* 0Fh */
+    U8                          MaxGlobalHotSpares;             /* 10h */
+    U8                          Reserved3;                      /* 11h */
+    U16                         Reserved4;                      /* 12h */
+    U32                         Reserved5;                      /* 14h */
+    U32                         SupportedStripeSizeMapIS;       /* 18h */
+    U32                         SupportedStripeSizeMapIME;      /* 1Ch */
+    U32                         Reserved6;                      /* 20h */
+    U8                          MetadataSize;                   /* 24h */
+    U8                          Reserved7;                      /* 25h */
+    U16                         Reserved8;                      /* 26h */
+    U16                         MaxBadBlockTableEntries;        /* 28h */
+    U16                         Reserved9;                      /* 2Ah */
+    U16                         IRNvsramUsage;                  /* 2Ch */
+    U16                         Reserved10;                     /* 2Eh */
+    U32                         IRNvsramVersion;                /* 30h */
+    U32                         Reserved11;                     /* 34h */
+    U32                         Reserved12;                     /* 38h */
+} CONFIG_PAGE_IOC_6, MPI_POINTER PTR_CONFIG_PAGE_IOC_6,
+  IOCPage6_t, MPI_POINTER pIOCPage6_t;
+
+#define MPI_IOCPAGE6_PAGEVERSION                        (0x00)
+
+/* IOC Page 6 Capabilities Flags */
+
+#define MPI_IOCPAGE6_CAP_FLAGS_GLOBAL_HOT_SPARE         (0x00000001)
+
 
 /****************************************************************************
 *   BIOS Config Pages
@@ -1218,13 +1329,13 @@ typedef struct _CONFIG_PAGE_BIOS_2
     U32                         Reserved5;              /* 14h */
     U32                         Reserved6;              /* 18h */
     U8                          BootDeviceForm;         /* 1Ch */
-    U8                          Reserved7;              /* 1Dh */
+    U8                          PrevBootDeviceForm;     /* 1Ch */
     U16                         Reserved8;              /* 1Eh */
     MPI_BIOSPAGE2_BOOT_DEVICE   BootDevice;             /* 20h */
 } CONFIG_PAGE_BIOS_2, MPI_POINTER PTR_CONFIG_PAGE_BIOS_2,
   BIOSPage2_t, MPI_POINTER pBIOSPage2_t;
 
-#define MPI_BIOSPAGE2_PAGEVERSION                       (0x01)
+#define MPI_BIOSPAGE2_PAGEVERSION                       (0x02)
 
 #define MPI_BIOSPAGE2_FORM_MASK                         (0x0F)
 #define MPI_BIOSPAGE2_FORM_ADAPTER_ORDER                (0x00)
@@ -2080,7 +2191,7 @@ typedef struct _CONFIG_PAGE_RAID_VOL_0
     RAID_VOL0_STATUS        VolumeStatus;   /* 08h */
     RAID_VOL0_SETTINGS      VolumeSettings; /* 0Ch */
     U32                     MaxLBA;         /* 10h */
-    U32                     Reserved1;      /* 14h */
+    U32                     MaxLBAHigh;     /* 14h */
     U32                     StripeSize;     /* 18h */
     U32                     Reserved2;      /* 1Ch */
     U32                     Reserved3;      /* 20h */
@@ -2092,7 +2203,7 @@ typedef struct _CONFIG_PAGE_RAID_VOL_0
 } CONFIG_PAGE_RAID_VOL_0, MPI_POINTER PTR_CONFIG_PAGE_RAID_VOL_0,
   RaidVolumePage0_t, MPI_POINTER pRaidVolumePage0_t;
 
-#define MPI_RAIDVOLPAGE0_PAGEVERSION                    (0x05)
+#define MPI_RAIDVOLPAGE0_PAGEVERSION                    (0x06)
 
 /* values for RAID Volume Page 0 InactiveStatus field */
 #define MPI_RAIDVOLPAGE0_UNKNOWN_INACTIVE               (0x00)
@@ -2324,7 +2435,8 @@ typedef struct _MPI_SAS_IO_UNIT0_PHY_DATA
 typedef struct _CONFIG_PAGE_SAS_IO_UNIT_0
 {
     CONFIG_EXTENDED_PAGE_HEADER     Header;                             /* 00h */
-    U32                             Reserved1;                          /* 08h */
+    U16                             NvdataVersionDefault;               /* 08h */
+    U16                             NvdataVersionPersistent;            /* 0Ah */
     U8                              NumPhys;                            /* 0Ch */
     U8                              Reserved2;                          /* 0Dh */
     U16                             Reserved3;                          /* 0Eh */
@@ -2332,7 +2444,7 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_0
 } CONFIG_PAGE_SAS_IO_UNIT_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_0,
   SasIOUnitPage0_t, MPI_POINTER pSasIOUnitPage0_t;
 
-#define MPI_SASIOUNITPAGE0_PAGEVERSION      (0x03)
+#define MPI_SASIOUNITPAGE0_PAGEVERSION      (0x04)
 
 /* values for SAS IO Unit Page 0 PortFlags */
 #define MPI_SAS_IOUNIT0_PORT_FLAGS_DISCOVERY_IN_PROGRESS    (0x08)
@@ -2373,12 +2485,13 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_0
 
 typedef struct _MPI_SAS_IO_UNIT1_PHY_DATA
 {
-    U8          Port;                   /* 00h */
-    U8          PortFlags;              /* 01h */
-    U8          PhyFlags;               /* 02h */
-    U8          MaxMinLinkRate;         /* 03h */
-    U32         ControllerPhyDeviceInfo;/* 04h */
-    U32         Reserved1;              /* 08h */
+    U8          Port;                       /* 00h */
+    U8          PortFlags;                  /* 01h */
+    U8          PhyFlags;                   /* 02h */
+    U8          MaxMinLinkRate;             /* 03h */
+    U32         ControllerPhyDeviceInfo;    /* 04h */
+    U16         MaxTargetPortConnectTime;   /* 08h */
+    U16         Reserved1;                  /* 0Ah */
 } MPI_SAS_IO_UNIT1_PHY_DATA, MPI_POINTER PTR_MPI_SAS_IO_UNIT1_PHY_DATA,
   SasIOUnit1PhyData, MPI_POINTER pSasIOUnit1PhyData;
 
@@ -2395,15 +2508,17 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_1
     CONFIG_EXTENDED_PAGE_HEADER Header;                             /* 00h */
     U16                         ControlFlags;                       /* 08h */
     U16                         MaxNumSATATargets;                  /* 0Ah */
-    U32                         Reserved1;                          /* 0Ch */
+    U16                         AdditionalControlFlags;             /* 0Ch */
+    U16                         Reserved1;                          /* 0Eh */
     U8                          NumPhys;                            /* 10h */
     U8                          SATAMaxQDepth;                      /* 11h */
-    U16                         Reserved2;                          /* 12h */
+    U8                          ReportDeviceMissingDelay;           /* 12h */
+    U8                          IODeviceMissingDelay;               /* 13h */
     MPI_SAS_IO_UNIT1_PHY_DATA   PhyData[MPI_SAS_IOUNIT1_PHY_MAX];   /* 14h */
 } CONFIG_PAGE_SAS_IO_UNIT_1, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_1,
   SasIOUnitPage1_t, MPI_POINTER pSasIOUnitPage1_t;
 
-#define MPI_SASIOUNITPAGE1_PAGEVERSION      (0x05)
+#define MPI_SASIOUNITPAGE1_PAGEVERSION      (0x06)
 
 /* values for SAS IO Unit Page 1 ControlFlags */
 #define MPI_SAS_IOUNIT1_CONTROL_DEVICE_SELF_TEST            (0x8000)
@@ -2428,6 +2543,13 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_1
 #define MPI_SAS_IOUNIT1_CONTROL_FIRST_LVL_DISC_ONLY         (0x0002)
 #define MPI_SAS_IOUNIT1_CONTROL_CLEAR_AFFILIATION           (0x0001)
 
+/* values for SAS IO Unit Page 1 AdditionalControlFlags */
+#define MPI_SAS_IOUNIT1_ACONTROL_ALLOW_TABLE_TO_TABLE       (0x0001)
+
+/* defines for SAS IO Unit Page 1 ReportDeviceMissingDelay */
+#define MPI_SAS_IOUNIT1_REPORT_MISSING_TIMEOUT_MASK         (0x7F)
+#define MPI_SAS_IOUNIT1_REPORT_MISSING_UNIT_16              (0x80)
+
 /* values for SAS IO Unit Page 1 PortFlags */
 #define MPI_SAS_IOUNIT1_PORT_FLAGS_0_TARGET_IOC_NUM         (0x00)
 #define MPI_SAS_IOUNIT1_PORT_FLAGS_1_TARGET_IOC_NUM         (0x04)

drivers/message/fusion/lsi/mpi_history.txt

@@ -6,25 +6,25 @@
  Copyright (c) 2000-2005 LSI Logic Corporation.
 
  ---------------------------------------
- Header Set Release Version:    01.05.12
- Header Set Release Date:       08-30-05
+ Header Set Release Version:    01.05.13
+ Header Set Release Date:       03-27-06
  ---------------------------------------
 
  Filename               Current version     Prior version
  ----------             ---------------     -------------
- mpi.h                  01.05.10            01.05.09
- mpi_ioc.h              01.05.10            01.05.09
- mpi_cnfg.h             01.05.11            01.05.10
- mpi_init.h             01.05.06            01.05.06
- mpi_targ.h             01.05.05            01.05.05
+ mpi.h                  01.05.11            01.05.10
+ mpi_ioc.h              01.05.11            01.05.10
+ mpi_cnfg.h             01.05.12            01.05.11
+ mpi_init.h             01.05.07            01.05.06
+ mpi_targ.h             01.05.06            01.05.05
  mpi_fc.h               01.05.01            01.05.01
  mpi_lan.h              01.05.01            01.05.01
  mpi_raid.h             01.05.02            01.05.02
  mpi_tool.h             01.05.03            01.05.03
  mpi_inb.h              01.05.01            01.05.01
- mpi_sas.h              01.05.02            01.05.01
- mpi_type.h             01.05.02            01.05.01
- mpi_history.txt        01.05.12            01.05.11
+ mpi_sas.h              01.05.03            01.05.02
+ mpi_type.h             01.05.02            01.05.02
+ mpi_history.txt        01.05.13            01.05.12
 
 
  *  Date      Version   Description
@@ -93,6 +93,7 @@ mpi.h
  *                      Added EEDP IOCStatus codes.
  *  08-03-05  01.05.09  Bumped MPI_HEADER_VERSION_UNIT.
  *  08-30-05  01.05.10  Added 2 new IOCStatus codes for Target.
+ *  03-27-06  01.05.11  Bumped MPI_HEADER_VERSION_UNIT.
  *  --------------------------------------------------------------------------
 
 mpi_ioc.h
@@ -170,6 +171,17 @@ mpi_ioc.h
  *                      Added new ReasonCode value for SAS Device Status Change
  *                      event.
  *                      Added new family code for FC949E.
+ *  03-27-06  01.05.11  Added MPI_IOCFACTS_CAPABILITY_TLR.
+ *                      Added additional Reason Codes and more event data fields
+ *                      to EVENT_DATA_SAS_DEVICE_STATUS_CHANGE.
+ *                      Added EVENT_DATA_SAS_BROADCAST_PRIMITIVE structure and
+ *                      new event.
+ *                      Added MPI_EVENT_SAS_SMP_ERROR and event data structure.
+ *                      Added MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE and event
+ *                      data structure.
+ *                      Added MPI_EVENT_SAS_INIT_TABLE_OVERFLOW and event
+ *                      data structure.
+ *                      Added MPI_EXT_IMAGE_TYPE_INITIALIZATION.
  *  --------------------------------------------------------------------------
 
 mpi_cnfg.h
@@ -425,6 +437,16 @@ mpi_cnfg.h
  *                      Added postpone SATA Init bit to SAS IO Unit Page 1
  *                      ControlFlags.
  *                      Changed LogEntry format for Log Page 0.
+ *  03-27-06  01.05.12  Added two new Flags defines for Manufacturing Page 4.
+ *                      Added Manufacturing Page 7.
+ *                      Added MPI_IOCPAGE2_CAP_FLAGS_RAID_64_BIT_ADDRESSING.
+ *                      Added IOC Page 6.
+ *                      Added PrevBootDeviceForm field to CONFIG_PAGE_BIOS_2.
+ *                      Added MaxLBAHigh field to RAID Volume Page 0.
+ *                      Added Nvdata version fields to SAS IO Unit Page 0.
+ *                      Added AdditionalControlFlags, MaxTargetPortConnectTime,
+ *                      ReportDeviceMissingDelay, and IODeviceMissingDelay
+ *                      fields to SAS IO Unit Page 1.
  *  --------------------------------------------------------------------------
 
 mpi_init.h
@@ -467,6 +489,7 @@ mpi_init.h
  *                      Added four new defines for SEP SlotStatus.
  *  08-03-05  01.05.06  Fixed some MPI_SCSIIO32_MSGFLGS_ defines to make them
  *                      unique in the first 32 characters.
+ *  03-27-06  01.05.07  Added Task Management type of Clear ACA.
  *  --------------------------------------------------------------------------
 
 mpi_targ.h
@@ -511,6 +534,7 @@ mpi_targ.h
  *  02-22-05  01.05.03  Changed a comment.
  *  03-11-05  01.05.04  Removed TargetAssistExtended Request.
  *  06-24-05  01.05.05  Added TargetAssistExtended structures and defines.
+ *  03-27-06  01.05.06  Added a comment.
  *  --------------------------------------------------------------------------
 
 mpi_fc.h
@@ -610,6 +634,10 @@ mpi_sas.h
  *  08-30-05  01.05.02  Added DeviceInfo bit for SEP.
  *                      Added PrimFlags and Primitive field to SAS IO Unit
  *                      Control request, and added a new operation code.
+ *  03-27-06  01.05.03  Added Force Full Discovery, Transmit Port Select Signal,
+ *                      and Remove Device operations to SAS IO Unit Control.
+ *                      Added DevHandle field to SAS IO Unit Control request and
+ *                      reply.
  *  --------------------------------------------------------------------------
 
 mpi_type.h
@@ -625,20 +653,20 @@ mpi_type.h
 
 mpi_history.txt         Parts list history
 
-Filename    01.05.12  01.05.11  01.05.10  01.05.09
-----------  --------  --------  --------  --------
-mpi.h       01.05.10  01.05.09  01.05.08  01.05.07
-mpi_ioc.h   01.05.10  01.05.09  01.05.09  01.05.08
-mpi_cnfg.h  01.05.11  01.05.10  01.05.09  01.05.08
-mpi_init.h  01.05.06  01.05.06  01.05.05  01.05.04
-mpi_targ.h  01.05.05  01.05.05  01.05.05  01.05.04
-mpi_fc.h    01.05.01  01.05.01  01.05.01  01.05.01
-mpi_lan.h   01.05.01  01.05.01  01.05.01  01.05.01
-mpi_raid.h  01.05.02  01.05.02  01.05.02  01.05.02
-mpi_tool.h  01.05.03  01.05.03  01.05.03  01.05.03
-mpi_inb.h   01.05.01  01.05.01  01.05.01  01.05.01
-mpi_sas.h   01.05.02  01.05.01  01.05.01  01.05.01
-mpi_type.h  01.05.02  01.05.01  01.05.01  01.05.01
+Filename    01.05.13  01.05.12  01.05.11  01.05.10  01.05.09
+----------  --------  --------  --------  --------  --------
+mpi.h       01.05.11  01.05.10  01.05.09  01.05.08  01.05.07
+mpi_ioc.h   01.05.11  01.05.10  01.05.09  01.05.09  01.05.08
+mpi_cnfg.h  01.05.12  01.05.11  01.05.10  01.05.09  01.05.08
+mpi_init.h  01.05.07  01.05.06  01.05.06  01.05.05  01.05.04
+mpi_targ.h  01.05.06  01.05.05  01.05.05  01.05.05  01.05.04
+mpi_fc.h    01.05.01  01.05.01  01.05.01  01.05.01  01.05.01
+mpi_lan.h   01.05.01  01.05.01  01.05.01  01.05.01  01.05.01
+mpi_raid.h  01.05.02  01.05.02  01.05.02  01.05.02  01.05.02
+mpi_tool.h  01.05.03  01.05.03  01.05.03  01.05.03  01.05.03
+mpi_inb.h   01.05.01  01.05.01  01.05.01  01.05.01  01.05.01
+mpi_sas.h   01.05.03  01.05.02  01.05.01  01.05.01  01.05.01
+mpi_type.h  01.05.02  01.05.02  01.05.01  01.05.01  01.05.01
 
 Filename    01.05.08   01.05.07   01.05.06   01.05.05   01.05.04   01.05.03
 ----------  --------   --------   --------   --------   --------   --------

drivers/message/fusion/lsi/mpi_init.h

@@ -6,7 +6,7 @@
  *          Title:  MPI initiator mode messages and structures
  *  Creation Date:  June 8, 2000
  *
- *    mpi_init.h Version:  01.05.06
+ *    mpi_init.h Version:  01.05.07
  *
  *  Version History
  *  ---------------
@@ -52,6 +52,7 @@
  *                      Added four new defines for SEP SlotStatus.
  *  08-03-05  01.05.06  Fixed some MPI_SCSIIO32_MSGFLGS_ defines to make them
  *                      unique in the first 32 characters.
+ *  03-27-06  01.05.07  Added Task Management type of Clear ACA.
  *  --------------------------------------------------------------------------
  */
 
@@ -427,6 +428,7 @@ typedef struct _MSG_SCSI_TASK_MGMT
 #define MPI_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET    (0x05)
 #define MPI_SCSITASKMGMT_TASKTYPE_CLEAR_TASK_SET        (0x06)
 #define MPI_SCSITASKMGMT_TASKTYPE_QUERY_TASK            (0x07)
+#define MPI_SCSITASKMGMT_TASKTYPE_CLEAR_ACA             (0x08)
 
 /* MsgFlags bits */
 #define MPI_SCSITASKMGMT_MSGFLAGS_TARGET_RESET_OPTION   (0x00)

drivers/message/fusion/lsi/mpi_ioc.h

@@ -6,7 +6,7 @@
  *          Title:  MPI IOC, Port, Event, FW Download, and FW Upload messages
  *  Creation Date:  August 11, 2000
  *
- *    mpi_ioc.h Version:  01.05.10
+ *    mpi_ioc.h Version:  01.05.11
  *
  *  Version History
  *  ---------------
@@ -87,6 +87,17 @@
  *                      Added new ReasonCode value for SAS Device Status Change
  *                      event.
  *                      Added new family code for FC949E.
+ *  03-27-06  01.05.11  Added MPI_IOCFACTS_CAPABILITY_TLR.
+ *                      Added additional Reason Codes and more event data fields
+ *                      to EVENT_DATA_SAS_DEVICE_STATUS_CHANGE.
+ *                      Added EVENT_DATA_SAS_BROADCAST_PRIMITIVE structure and
+ *                      new event.
+ *                      Added MPI_EVENT_SAS_SMP_ERROR and event data structure.
+ *                      Added MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE and event
+ *                      data structure.
+ *                      Added MPI_EVENT_SAS_INIT_TABLE_OVERFLOW and event
+ *                      data structure.
+ *                      Added MPI_EXT_IMAGE_TYPE_INITIALIZATION.
  *  --------------------------------------------------------------------------
  */
 
@@ -272,6 +283,7 @@ typedef struct _MSG_IOC_FACTS_REPLY
 #define MPI_IOCFACTS_CAPABILITY_MULTICAST               (0x00000100)
 #define MPI_IOCFACTS_CAPABILITY_SCSIIO32                (0x00000200)
 #define MPI_IOCFACTS_CAPABILITY_NO_SCSIIO16             (0x00000400)
+#define MPI_IOCFACTS_CAPABILITY_TLR                     (0x00000800)
 
 
 /*****************************************************************************
@@ -448,30 +460,34 @@ typedef struct _MSG_EVENT_ACK_REPLY
 
 /* Event */
 
-#define MPI_EVENT_NONE                      (0x00000000)
-#define MPI_EVENT_LOG_DATA                  (0x00000001)
-#define MPI_EVENT_STATE_CHANGE              (0x00000002)
-#define MPI_EVENT_UNIT_ATTENTION            (0x00000003)
-#define MPI_EVENT_IOC_BUS_RESET             (0x00000004)
-#define MPI_EVENT_EXT_BUS_RESET             (0x00000005)
-#define MPI_EVENT_RESCAN                    (0x00000006)
-#define MPI_EVENT_LINK_STATUS_CHANGE        (0x00000007)
-#define MPI_EVENT_LOOP_STATE_CHANGE         (0x00000008)
-#define MPI_EVENT_LOGOUT                    (0x00000009)
-#define MPI_EVENT_EVENT_CHANGE              (0x0000000A)
-#define MPI_EVENT_INTEGRATED_RAID           (0x0000000B)
-#define MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE (0x0000000C)
-#define MPI_EVENT_ON_BUS_TIMER_EXPIRED      (0x0000000D)
-#define MPI_EVENT_QUEUE_FULL                (0x0000000E)
-#define MPI_EVENT_SAS_DEVICE_STATUS_CHANGE  (0x0000000F)
-#define MPI_EVENT_SAS_SES                   (0x00000010)
-#define MPI_EVENT_PERSISTENT_TABLE_FULL     (0x00000011)
-#define MPI_EVENT_SAS_PHY_LINK_STATUS       (0x00000012)
-#define MPI_EVENT_SAS_DISCOVERY_ERROR       (0x00000013)
-#define MPI_EVENT_IR_RESYNC_UPDATE          (0x00000014)
-#define MPI_EVENT_IR2                       (0x00000015)
-#define MPI_EVENT_SAS_DISCOVERY             (0x00000016)
-#define MPI_EVENT_LOG_ENTRY_ADDED           (0x00000021)
+#define MPI_EVENT_NONE                          (0x00000000)
+#define MPI_EVENT_LOG_DATA                      (0x00000001)
+#define MPI_EVENT_STATE_CHANGE                  (0x00000002)
+#define MPI_EVENT_UNIT_ATTENTION                (0x00000003)
+#define MPI_EVENT_IOC_BUS_RESET                 (0x00000004)
+#define MPI_EVENT_EXT_BUS_RESET                 (0x00000005)
+#define MPI_EVENT_RESCAN                        (0x00000006)
+#define MPI_EVENT_LINK_STATUS_CHANGE            (0x00000007)
+#define MPI_EVENT_LOOP_STATE_CHANGE             (0x00000008)
+#define MPI_EVENT_LOGOUT                        (0x00000009)
+#define MPI_EVENT_EVENT_CHANGE                  (0x0000000A)
+#define MPI_EVENT_INTEGRATED_RAID               (0x0000000B)
+#define MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE     (0x0000000C)
+#define MPI_EVENT_ON_BUS_TIMER_EXPIRED          (0x0000000D)
+#define MPI_EVENT_QUEUE_FULL                    (0x0000000E)
+#define MPI_EVENT_SAS_DEVICE_STATUS_CHANGE      (0x0000000F)
+#define MPI_EVENT_SAS_SES                       (0x00000010)
+#define MPI_EVENT_PERSISTENT_TABLE_FULL         (0x00000011)
+#define MPI_EVENT_SAS_PHY_LINK_STATUS           (0x00000012)
+#define MPI_EVENT_SAS_DISCOVERY_ERROR           (0x00000013)
+#define MPI_EVENT_IR_RESYNC_UPDATE              (0x00000014)
+#define MPI_EVENT_IR2                           (0x00000015)
+#define MPI_EVENT_SAS_DISCOVERY                 (0x00000016)
+#define MPI_EVENT_SAS_BROADCAST_PRIMITIVE       (0x00000017)
+#define MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE (0x00000018)
+#define MPI_EVENT_SAS_INIT_TABLE_OVERFLOW       (0x00000019)
+#define MPI_EVENT_SAS_SMP_ERROR                 (0x0000001A)
+#define MPI_EVENT_LOG_ENTRY_ADDED               (0x00000021)
 
 /* AckRequired field values */
 
@@ -558,18 +574,25 @@ typedef struct _EVENT_DATA_SAS_DEVICE_STATUS_CHANGE
     U8                      PhyNum;                     /* 0Eh */
     U8                      Reserved1;                  /* 0Fh */
     U64                     SASAddress;                 /* 10h */
+    U8                      LUN[8];                     /* 18h */
+    U16                     TaskTag;                    /* 20h */
+    U16                     Reserved2;                  /* 22h */
 } EVENT_DATA_SAS_DEVICE_STATUS_CHANGE,
   MPI_POINTER PTR_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE,
   MpiEventDataSasDeviceStatusChange_t,
   MPI_POINTER pMpiEventDataSasDeviceStatusChange_t;
 
 /* MPI SAS Device Status Change Event data ReasonCode values */
-#define MPI_EVENT_SAS_DEV_STAT_RC_ADDED                 (0x03)
-#define MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING        (0x04)
-#define MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA            (0x05)
-#define MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED      (0x06)
-#define MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED           (0x07)
-#define MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08)
+#define MPI_EVENT_SAS_DEV_STAT_RC_ADDED                     (0x03)
+#define MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING            (0x04)
+#define MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA                (0x05)
+#define MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED          (0x06)
+#define MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED               (0x07)
+#define MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET     (0x08)
+#define MPI_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL       (0x09)
+#define MPI_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL   (0x0A)
+#define MPI_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL   (0x0B)
+#define MPI_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL       (0x0C)
 
 
 /* SCSI Event data for Queue Full event */
@@ -742,6 +765,27 @@ typedef struct _EVENT_DATA_SAS_SES
 } EVENT_DATA_SAS_SES, MPI_POINTER PTR_EVENT_DATA_SAS_SES,
   MpiEventDataSasSes_t, MPI_POINTER pMpiEventDataSasSes_t;
 
+/* SAS Broadcast Primitive Event data */
+
+typedef struct _EVENT_DATA_SAS_BROADCAST_PRIMITIVE
+{
+    U8                      PhyNum;                     /* 00h */
+    U8                      Port;                       /* 01h */
+    U8                      PortWidth;                  /* 02h */
+    U8                      Primitive;                  /* 04h */
+} EVENT_DATA_SAS_BROADCAST_PRIMITIVE,
+  MPI_POINTER PTR_EVENT_DATA_SAS_BROADCAST_PRIMITIVE,
+  MpiEventDataSasBroadcastPrimitive_t,
+  MPI_POINTER pMpiEventDataSasBroadcastPrimitive_t;
+
+#define MPI_EVENT_PRIMITIVE_CHANGE              (0x01)
+#define MPI_EVENT_PRIMITIVE_EXPANDER            (0x03)
+#define MPI_EVENT_PRIMITIVE_RESERVED2           (0x04)
+#define MPI_EVENT_PRIMITIVE_RESERVED3           (0x05)
+#define MPI_EVENT_PRIMITIVE_RESERVED4           (0x06)
+#define MPI_EVENT_PRIMITIVE_CHANGE0_RESERVED    (0x07)
+#define MPI_EVENT_PRIMITIVE_CHANGE1_RESERVED    (0x08)
+
 /* SAS Phy Link Status Event data */
 
 typedef struct _EVENT_DATA_SAS_PHY_LINK_STATUS
@@ -804,6 +848,53 @@ typedef struct _EVENT_DATA_DISCOVERY_ERROR
 #define MPI_EVENT_DSCVRY_ERR_DS_MULTPL_PATHS                (0x00000800)
 #define MPI_EVENT_DSCVRY_ERR_DS_MAX_SATA_TARGETS            (0x00001000)
 
+/* SAS SMP Error Event data */
+
+typedef struct _EVENT_DATA_SAS_SMP_ERROR
+{
+    U8                      Status;                     /* 00h */
+    U8                      Port;                       /* 01h */
+    U8                      SMPFunctionResult;          /* 02h */
+    U8                      Reserved1;                  /* 03h */
+    U64                     SASAddress;                 /* 04h */
+} EVENT_DATA_SAS_SMP_ERROR, MPI_POINTER PTR_EVENT_DATA_SAS_SMP_ERROR,
+  MpiEventDataSasSmpError_t, MPI_POINTER pMpiEventDataSasSmpError_t;
+
+/* defines for the Status field of the SAS SMP Error event */
+#define MPI_EVENT_SAS_SMP_FUNCTION_RESULT_VALID         (0x00)
+#define MPI_EVENT_SAS_SMP_CRC_ERROR                     (0x01)
+#define MPI_EVENT_SAS_SMP_TIMEOUT                       (0x02)
+#define MPI_EVENT_SAS_SMP_NO_DESTINATION                (0x03)
+#define MPI_EVENT_SAS_SMP_BAD_DESTINATION               (0x04)
+
+/* SAS Initiator Device Status Change Event data */
+
+typedef struct _EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE
+{
+    U8                      ReasonCode;                 /* 00h */
+    U8                      Port;                       /* 01h */
+    U16                     DevHandle;                  /* 02h */
+    U64                     SASAddress;                 /* 04h */
+} EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE,
+  MPI_POINTER PTR_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE,
+  MpiEventDataSasInitDevStatusChange_t,
+  MPI_POINTER pMpiEventDataSasInitDevStatusChange_t;
+
+/* defines for the ReasonCode field of the SAS Initiator Device Status Change event */
+#define MPI_EVENT_SAS_INIT_RC_ADDED                 (0x01)
+
+/* SAS Initiator Device Table Overflow Event data */
+
+typedef struct _EVENT_DATA_SAS_INIT_TABLE_OVERFLOW
+{
+    U8                      MaxInit;                    /* 00h */
+    U8                      CurrentInit;                /* 01h */
+    U16                     Reserved1;                  /* 02h */
+} EVENT_DATA_SAS_INIT_TABLE_OVERFLOW,
+  MPI_POINTER PTR_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW,
+  MpiEventDataSasInitTableOverflow_t,
+  MPI_POINTER pMpiEventDataSasInitTableOverflow_t;
+
 
 /*****************************************************************************
 *
@@ -1013,5 +1104,6 @@ typedef struct _MPI_EXT_IMAGE_HEADER
 #define MPI_EXT_IMAGE_TYPE_FW                   (0x01)
 #define MPI_EXT_IMAGE_TYPE_NVDATA               (0x03)
 #define MPI_EXT_IMAGE_TYPE_BOOTLOADER           (0x04)
+#define MPI_EXT_IMAGE_TYPE_INITIALIZATION       (0x05)
 
 #endif

drivers/message/fusion/lsi/mpi_log_sas.h

@@ -13,6 +13,8 @@
 #ifndef IOPI_IOCLOGINFO_H_INCLUDED
 #define IOPI_IOCLOGINFO_H_INCLUDED
 
+#define SAS_LOGINFO_NEXUS_LOSS		0x31170000
+#define SAS_LOGINFO_MASK			0xFFFF0000
 
 /****************************************************************************/
 /*  IOC LOGINFO defines, 0x00000000 - 0x0FFFFFFF                            */
@@ -51,6 +53,9 @@
 #define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_DNM        (0x00030500) /* Device Not Mapped */
 #define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_PERSIST    (0x00030600) /* Persistent Page not found */
 #define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_DEFAULT    (0x00030700) /* Default Page not found */
+
+#define IOP_LOGINFO_CODE_DIAG_MSG_ERROR                 (0x00040000) /* Error handling diag msg - or'd with diag status */
+
 #define IOP_LOGINFO_CODE_TASK_TERMINATED                (0x00050000)
 
 #define IOP_LOGINFO_CODE_ENCL_MGMT_READ_ACTION_ERR0R    (0x00060001) /* Read Action not supported for SEP msg */
@@ -103,6 +108,7 @@
 #define PL_LOGINFO_CODE_IO_EXECUTED                         (0x00140000)
 #define PL_LOGINFO_CODE_PERS_RESV_OUT_NOT_AFFIL_OWNER       (0x00150000)
 #define PL_LOGINFO_CODE_OPEN_TXDMA_ABORT                    (0x00160000)
+#define PL_LOGINFO_CODE_IO_DEVICE_MISSING_DELAY_RETRY       (0x00170000)
 #define PL_LOGINFO_SUB_CODE_OPEN_FAILURE                    (0x00000100)
 #define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_NO_DEST_TIMEOUT    (0x00000101)
 #define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_ORR_TIMEOUT        (0x0000011A) /* Open Reject (Retry) Timeout */
@@ -165,11 +171,81 @@
 /****************************************************************************/
 /* IR LOGINFO_CODE defines, valid if IOC_LOGINFO_ORIGINATOR = IR            */
 /****************************************************************************/
-#define IR_LOGINFO_CODE_UNUSED1                         (0x00010000)
-#define IR_LOGINFO_CODE_UNUSED2                         (0x00020000)
+#define IR_LOGINFO_RAID_ACTION_ERROR                           (0x00010000)
+#define IR_LOGINFO_CODE_UNUSED2                                (0x00020000)
+
+/* Amount of information passed down for Create Volume is too large */
+#define IR_LOGINFO_VOLUME_CREATE_INVALID_LENGTH                (0x00010001)
+/* Creation of duplicate volume attempted (Bus/Target ID checked) */
+#define IR_LOGINFO_VOLUME_CREATE_DUPLICATE                     (0x00010002)
+/* Creation failed due to maximum number of supported volumes exceeded */
+#define IR_LOGINFO_VOLUME_CREATE_NO_SLOTS                      (0x00010003)
+/* Creation failed due to DMA error in trying to read from host */
+#define IR_LOGINFO_VOLUME_CREATE_DMA_ERROR                     (0x00010004)
+/* Creation failed due to invalid volume type passed down */
+#define IR_LOGINFO_VOLUME_CREATE_INVALID_VOLUME_TYPE           (0x00010005)
+/* Creation failed due to error reading MFG Page 4 */
+#define IR_LOGINFO_VOLUME_MFG_PAGE4_ERROR                      (0x00010006)
+/* Creation failed when trying to create internal structures */
+#define IR_LOGINFO_VOLUME_INTERNAL_CONFIG_STRUCTURE_ERROR      (0x00010007)
+
+/* Activation failed due to trying to activate an already active volume */
+#define IR_LOGINFO_VOLUME_ACTIVATING_AN_ACTIVE_VOLUME          (0x00010010)
+/* Activation failed due to trying to active unsupported volume type  */
+#define IR_LOGINFO_VOLUME_ACTIVATING_INVALID_VOLUME_TYPE       (0x00010011)
+/* Activation failed due to trying to active too many volumes  */
+#define IR_LOGINFO_VOLUME_ACTIVATING_TOO_MANY_VOLUMES          (0x00010012)
+/* Activation failed due to Volume ID in use already */
+#define IR_LOGINFO_VOLUME_ACTIVATING_VOLUME_ID_IN_USE          (0x00010013)
+/* Activation failed call to activateVolume returned failure */
+#define IR_LOGINFO_VOLUME_ACTIVATE_VOLUME_FAILED               (0x00010014)
+/* Activation failed trying to import the volume */
+#define IR_LOGINFO_VOLUME_ACTIVATING_IMPORT_VOLUME_FAILED      (0x00010015)
+
+/* Phys Disk failed, too many phys disks */
+#define IR_LOGINFO_PHYSDISK_CREATE_TOO_MANY_DISKS              (0x00010020)
+/* Amount of information passed down for Create Pnysdisk is too large */
+#define IR_LOGINFO_PHYSDISK_CREATE_INVALID_LENGTH              (0x00010021)
+/* Creation failed due to DMA error in trying to read from host */
+#define IR_LOGINFO_PHYSDISK_CREATE_DMA_ERROR                   (0x00010022)
+/* Creation failed due to invalid Bus TargetID passed down */
+#define IR_LOGINFO_PHYSDISK_CREATE_BUS_TID_INVALID             (0x00010023)
+/* Creation failed due to error in creating RAID Phys Disk Config Page */
+#define IR_LOGINFO_PHYSDISK_CREATE_CONFIG_PAGE_ERROR           (0x00010024)
+
+
+/* Compatibility Error : IR Disabled */
+#define IR_LOGINFO_COMPAT_ERROR_RAID_DISABLED                  (0x00010030)
+/* Compatibility Error : Inquiry Comand failed */
+#define IR_LOGINFO_COMPAT_ERROR_INQUIRY_FAILED                 (0x00010031)
+/* Compatibility Error : Device not direct access device */
+#define IR_LOGINFO_COMPAT_ERROR_NOT_DIRECT_ACCESS              (0x00010032)
+/* Compatibility Error : Removable device found */
+#define IR_LOGINFO_COMPAT_ERROR_REMOVABLE_FOUND                (0x00010033)
+/* Compatibility Error : Device SCSI Version not 2 or higher */
+#define IR_LOGINFO_COMPAT_ERROR_NEED_SCSI_2_OR_HIGHER          (0x00010034)
+/* Compatibility Error : SATA device, 48 BIT LBA not supported */
+#define IR_LOGINFO_COMPAT_ERROR_SATA_48BIT_LBA_NOT_SUPPORTED   (0x00010035)
+/* Compatibility Error : Device does not have 512 byte block sizes */
+#define IR_LOGINFO_COMPAT_ERROR_DEVICE_NOT_512_BYTE_BLOCK      (0x00010036)
+/* Compatibility Error : Volume Type check failed */
+#define IR_LOGINFO_COMPAT_ERROR_VOLUME_TYPE_CHECK_FAILED       (0x00010037)
+/* Compatibility Error : Volume Type is unsupported by FW */
+#define IR_LOGINFO_COMPAT_ERROR_UNSUPPORTED_VOLUME_TYPE        (0x00010038)
+/* Compatibility Error : Disk drive too small for use in volume */
+#define IR_LOGINFO_COMPAT_ERROR_DISK_TOO_SMALL                 (0x00010039)
+/* Compatibility Error : Phys disk for Create Volume not found */
+#define IR_LOGINFO_COMPAT_ERROR_PHYS_DISK_NOT_FOUND            (0x0001003A)
+/* Compatibility Error : membership count error, too many or too few disks for volume type */
+#define IR_LOGINFO_COMPAT_ERROR_MEMBERSHIP_COUNT               (0x0001003B)
+/* Compatibility Error : Disk stripe sizes must be 64KB */
+#define IR_LOGINFO_COMPAT_ERROR_NON_64K_STRIPE_SIZE            (0x0001003C)
+/* Compatibility Error : IME size limited to < 2TB */
+#define IR_LOGINFO_COMPAT_ERROR_IME_VOL_NOT_CURRENTLY_SUPPORTED (0x0001003D)
+
 
 /****************************************************************************/
-/* Defines for convienence                                                  */
+/* Defines for convenience                                                  */
 /****************************************************************************/
 #define IOC_LOGINFO_PREFIX_IOP                          ((MPI_IOCLOGINFO_TYPE_SAS << MPI_IOCLOGINFO_TYPE_SHIFT) | IOC_LOGINFO_ORIGINATOR_IOP)
 #define IOC_LOGINFO_PREFIX_PL                           ((MPI_IOCLOGINFO_TYPE_SAS << MPI_IOCLOGINFO_TYPE_SHIFT) | IOC_LOGINFO_ORIGINATOR_PL)

drivers/message/fusion/lsi/mpi_sas.h

@@ -6,7 +6,7 @@
  *          Title:  MPI Serial Attached SCSI structures and definitions
  *  Creation Date:  August 19, 2004
  *
- *    mpi_sas.h Version:  01.05.02
+ *    mpi_sas.h Version:  01.05.03
  *
  *  Version History
  *  ---------------
@@ -17,6 +17,10 @@
  *  08-30-05  01.05.02  Added DeviceInfo bit for SEP.
  *                      Added PrimFlags and Primitive field to SAS IO Unit
  *                      Control request, and added a new operation code.
+ *  03-27-06  01.05.03  Added Force Full Discovery, Transmit Port Select Signal,
+ *                      and Remove Device operations to SAS IO Unit Control.
+ *                      Added DevHandle field to SAS IO Unit Control request and
+ *                      reply.
  *  --------------------------------------------------------------------------
  */
 
@@ -209,7 +213,7 @@ typedef struct _MSG_SAS_IOUNIT_CONTROL_REQUEST
     U8                      Reserved1;          /* 01h */
     U8                      ChainOffset;        /* 02h */
     U8                      Function;           /* 03h */
-    U16                     Reserved2;          /* 04h */
+    U16                     DevHandle;          /* 04h */
     U8                      Reserved3;          /* 06h */
     U8                      MsgFlags;           /* 07h */
     U32                     MsgContext;         /* 08h */
@@ -231,6 +235,9 @@ typedef struct _MSG_SAS_IOUNIT_CONTROL_REQUEST
 #define MPI_SAS_OP_PHY_CLEAR_ERROR_LOG          (0x08)
 #define MPI_SAS_OP_MAP_CURRENT                  (0x09)
 #define MPI_SAS_OP_SEND_PRIMITIVE               (0x0A)
+#define MPI_SAS_OP_FORCE_FULL_DISCOVERY         (0x0B)
+#define MPI_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL  (0x0C)
+#define MPI_SAS_OP_TRANSMIT_REMOVE_DEVICE       (0x0D)
 
 /* values for the PrimFlags field */
 #define MPI_SAS_PRIMFLAGS_SINGLE                (0x08)
@@ -245,7 +252,7 @@ typedef struct _MSG_SAS_IOUNIT_CONTROL_REPLY
     U8                      Reserved1;          /* 01h */
     U8                      MsgLength;          /* 02h */
     U8                      Function;           /* 03h */
-    U16                     Reserved2;          /* 04h */
+    U16                     DevHandle;          /* 04h */
     U8                      Reserved3;          /* 06h */
     U8                      MsgFlags;           /* 07h */
     U32                     MsgContext;         /* 08h */

drivers/message/fusion/lsi/mpi_targ.h

@@ -6,7 +6,7 @@
  *          Title:  MPI Target mode messages and structures
  *  Creation Date:  June 22, 2000
  *
- *    mpi_targ.h Version:  01.05.05
+ *    mpi_targ.h Version:  01.05.06
  *
  *  Version History
  *  ---------------
@@ -54,6 +54,7 @@
  *  02-22-05  01.05.03  Changed a comment.
  *  03-11-05  01.05.04  Removed TargetAssistExtended Request.
  *  06-24-05  01.05.05  Added TargetAssistExtended structures and defines.
+ *  03-27-06  01.05.06  Added a comment.
  *  --------------------------------------------------------------------------
  */
 
@@ -351,7 +352,7 @@ typedef struct _MSG_TARGET_ASSIST_REQUEST
 #define TARGET_ASSIST_FLAGS_CONFIRMED               (0x08)
 #define TARGET_ASSIST_FLAGS_REPOST_CMD_BUFFER       (0x80)
 
-
+/* Standard Target Mode Reply message */
 typedef struct _MSG_TARGET_ERROR_REPLY
 {
     U16                     Reserved;                   /* 00h */

drivers/message/fusion/mptbase.c

@@ -368,20 +368,21 @@ static irqreturn_t
 mpt_interrupt(int irq, void *bus_id, struct pt_regs *r)
 {
 	MPT_ADAPTER *ioc = bus_id;
-	u32 pa;
+	u32 pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo);
+
+	if (pa == 0xFFFFFFFF)
+		return IRQ_NONE;
 
 	/*
 	 *  Drain the reply FIFO!
 	 */
-	while (1) {
-		pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo);
-		if (pa == 0xFFFFFFFF)
-			return IRQ_HANDLED;
-		else if (pa & MPI_ADDRESS_REPLY_A_BIT)
+	do {
+		if (pa & MPI_ADDRESS_REPLY_A_BIT)
 			mpt_reply(ioc, pa);
 		else
 			mpt_turbo_reply(ioc, pa);
-	}
+		pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo);
+	} while (pa != 0xFFFFFFFF);
 
 	return IRQ_HANDLED;
 }
@@ -1219,31 +1220,25 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
 	port = psize = 0;
 	for (ii=0; ii < DEVICE_COUNT_RESOURCE; ii++) {
 		if (pci_resource_flags(pdev, ii) & PCI_BASE_ADDRESS_SPACE_IO) {
+			if (psize)
+				continue;
 			/* Get I/O space! */
 			port = pci_resource_start(pdev, ii);
 			psize = pci_resource_len(pdev,ii);
 		} else {
+			if (msize)
+				continue;
 			/* Get memmap */
 			mem_phys = pci_resource_start(pdev, ii);
 			msize = pci_resource_len(pdev,ii);
-			break;
 		}
 	}
 	ioc->mem_size = msize;
 
-	if (ii == DEVICE_COUNT_RESOURCE) {
-		printk(KERN_ERR MYNAM ": ERROR - MPT adapter has no memory regions defined!\n");
-		kfree(ioc);
-		return -EINVAL;
-	}
-
-	dinitprintk((KERN_INFO MYNAM ": MPT adapter @ %lx, msize=%dd bytes\n", mem_phys, msize));
-	dinitprintk((KERN_INFO MYNAM ": (port i/o @ %lx, psize=%dd bytes)\n", port, psize));
-
 	mem = NULL;
 	/* Get logical ptr for PciMem0 space */
 	/*mem = ioremap(mem_phys, msize);*/
-	mem = ioremap(mem_phys, 0x100);
+	mem = ioremap(mem_phys, msize);
 	if (mem == NULL) {
 		printk(KERN_ERR MYNAM ": ERROR - Unable to map adapter memory!\n");
 		kfree(ioc);
@@ -1343,11 +1338,6 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
 		ioc->bus_type = SAS;
 		ioc->errata_flag_1064 = 1;
 	}
-	else if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1066) {
-		ioc->prod_name = "LSISAS1066";
-		ioc->bus_type = SAS;
-		ioc->errata_flag_1064 = 1;
-	}
 	else if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1068) {
 		ioc->prod_name = "LSISAS1068";
 		ioc->bus_type = SAS;
@@ -1357,14 +1347,14 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
 		ioc->prod_name = "LSISAS1064E";
 		ioc->bus_type = SAS;
 	}
-	else if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1066E) {
-		ioc->prod_name = "LSISAS1066E";
-		ioc->bus_type = SAS;
-	}
 	else if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1068E) {
 		ioc->prod_name = "LSISAS1068E";
 		ioc->bus_type = SAS;
 	}
+	else if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) {
+		ioc->prod_name = "LSISAS1078";
+		ioc->bus_type = SAS;
+	}
 
 	if (ioc->errata_flag_1064)
 		pci_disable_io_access(pdev);
@@ -3184,6 +3174,37 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
 	u32 diag1val = 0;
 #endif
 
+	if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) {
+		drsprintk((MYIOC_s_WARN_FMT "%s: Doorbell=%p; 1078 reset "
+			"address=%p\n",  ioc->name, __FUNCTION__,
+			&ioc->chip->Doorbell, &ioc->chip->Reset_1078));
+		CHIPREG_WRITE32(&ioc->chip->Reset_1078, 0x07);
+		if (sleepFlag == CAN_SLEEP)
+			msleep(1);
+		else
+			mdelay(1);
+
+		for (count = 0; count < 60; count ++) {
+			doorbell = CHIPREG_READ32(&ioc->chip->Doorbell);
+			doorbell &= MPI_IOC_STATE_MASK;
+
+			drsprintk((MYIOC_s_INFO_FMT
+				"looking for READY STATE: doorbell=%x"
+			        " count=%d\n",
+				ioc->name, doorbell, count));
+			if (doorbell == MPI_IOC_STATE_READY) {
+				return 0;
+			}
+
+			/* wait 1 sec */
+			if (sleepFlag == CAN_SLEEP)
+				msleep(1000);
+			else
+				mdelay(1000);
+		}
+		return -1;
+	}
+
 	/* Clear any existing interrupts */
 	CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
 

drivers/message/fusion/mptbase.h

@@ -75,8 +75,8 @@
 #define COPYRIGHT	"Copyright (c) 1999-2005 " MODULEAUTHOR
 #endif
 
-#define MPT_LINUX_VERSION_COMMON	"3.03.10"
-#define MPT_LINUX_PACKAGE_NAME		"@(#)mptlinux-3.03.10"
+#define MPT_LINUX_VERSION_COMMON	"3.04.00"
+#define MPT_LINUX_PACKAGE_NAME		"@(#)mptlinux-3.04.00"
 #define WHAT_MAGIC_STRING		"@" "(" "#" ")"
 
 #define show_mptmod_ver(s,ver)  \
@@ -307,7 +307,8 @@ typedef struct _SYSIF_REGS
 	u32	HostIndex;	/* 50     Host Index register        */
 	u32	Reserved4[15];	/* 54-8F                             */
 	u32	Fubar;		/* 90     For Fubar usage            */
-	u32	Reserved5[27];	/* 94-FF                             */
+	u32     Reserved5[1050];/* 94-10F8                           */
+	u32     Reset_1078;     /* 10FC   Reset 1078                 */
 } SYSIF_REGS;
 
 /*
@@ -341,6 +342,7 @@ typedef struct _VirtTarget {
 	u8			 negoFlags;	/* bit field, see above */
 	u8			 raidVolume;	/* set, if RAID Volume */
 	u8			 type;		/* byte 0 of Inquiry data */
+	u8			 deleted;	/* target in process of being removed */
 	u32			 num_luns;
 	u32			 luns[8];		/* Max LUNs is 256 */
 } VirtTarget;
@@ -629,10 +631,11 @@ typedef struct _MPT_ADAPTER
 	struct mutex		 sas_discovery_mutex;
 	u8			 sas_discovery_runtime;
 	u8			 sas_discovery_ignore_events;
+	u16			 handle;
 	int			 sas_index; /* index refrencing */
 	MPT_SAS_MGMT		 sas_mgmt;
 	int			 num_ports;
-	struct work_struct	 mptscsih_persistTask;
+	struct work_struct	 sas_persist_task;
 
 	struct work_struct	 fc_setup_reset_work;
 	struct list_head	 fc_rports;
@@ -641,6 +644,7 @@ typedef struct _MPT_ADAPTER
 	struct work_struct	 fc_rescan_work;
 	char			 fc_rescan_work_q_name[KOBJ_NAME_LEN];
 	struct workqueue_struct *fc_rescan_work_q;
+	u8		port_serial_number;
 } MPT_ADAPTER;
 
 /*
@@ -892,6 +896,13 @@ typedef struct _mpt_sge {
 #define DBG_DUMP_REQUEST_FRAME_HDR(mfp)
 #endif
 
+// debug sas wide ports
+#ifdef MPT_DEBUG_SAS_WIDE
+#define dsaswideprintk(x) printk x
+#else
+#define dsaswideprintk(x)
+#endif
+
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 

drivers/message/fusion/mptfc.c

@@ -132,21 +132,21 @@ static struct scsi_host_template mptfc_driver_template = {
  */
 
 static struct pci_device_id mptfc_pci_table[] = {
-	{ PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC909,
+	{ PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVICEID_FC909,
 		PCI_ANY_ID, PCI_ANY_ID },
-	{ PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC919,
+	{ PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVICEID_FC919,
 		PCI_ANY_ID, PCI_ANY_ID },
-	{ PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC929,
+	{ PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVICEID_FC929,
 		PCI_ANY_ID, PCI_ANY_ID },
-	{ PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC919X,
+	{ PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVICEID_FC919X,
 		PCI_ANY_ID, PCI_ANY_ID },
-	{ PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC929X,
+	{ PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVICEID_FC929X,
 		PCI_ANY_ID, PCI_ANY_ID },
-	{ PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC939X,
+	{ PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVICEID_FC939X,
 		PCI_ANY_ID, PCI_ANY_ID },
-	{ PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC949X,
+	{ PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVICEID_FC949X,
 		PCI_ANY_ID, PCI_ANY_ID },
-	{ PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC949ES,
+	{ PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVICEID_FC949E,
 		PCI_ANY_ID, PCI_ANY_ID },
 	{0}	/* Terminating entry */
 };

drivers/message/fusion/mptspi.c

@@ -775,9 +775,9 @@ static struct spi_function_template mptspi_transport_functions = {
  */
 
 static struct pci_device_id mptspi_pci_table[] = {
-	{ PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_53C1030,
+	{ PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_53C1030,
 		PCI_ANY_ID, PCI_ANY_ID },
-	{ PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_1030_53C1035,
+	{ PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_53C1035,
 		PCI_ANY_ID, PCI_ANY_ID },
 	{0}	/* Terminating entry */
 };

drivers/scsi/53c700.c

@@ -173,6 +173,7 @@ STATIC int NCR_700_bus_reset(struct scsi_cmnd * SCpnt);
 STATIC int NCR_700_host_reset(struct scsi_cmnd * SCpnt);
 STATIC void NCR_700_chip_setup(struct Scsi_Host *host);
 STATIC void NCR_700_chip_reset(struct Scsi_Host *host);
+STATIC int NCR_700_slave_alloc(struct scsi_device *SDpnt);
 STATIC int NCR_700_slave_configure(struct scsi_device *SDpnt);
 STATIC void NCR_700_slave_destroy(struct scsi_device *SDpnt);
 static int NCR_700_change_queue_depth(struct scsi_device *SDpnt, int depth);
@@ -182,10 +183,6 @@ STATIC struct device_attribute *NCR_700_dev_attrs[];
 
 STATIC struct scsi_transport_template *NCR_700_transport_template = NULL;
 
-struct NCR_700_sense {
-	unsigned char cmnd[MAX_COMMAND_SIZE];
-};
-
 static char *NCR_700_phase[] = {
 	"",
 	"after selection",
@@ -333,6 +330,7 @@ NCR_700_detect(struct scsi_host_template *tpnt,
 	tpnt->use_clustering = ENABLE_CLUSTERING;
 	tpnt->slave_configure = NCR_700_slave_configure;
 	tpnt->slave_destroy = NCR_700_slave_destroy;
+	tpnt->slave_alloc = NCR_700_slave_alloc;
 	tpnt->change_queue_depth = NCR_700_change_queue_depth;
 	tpnt->change_queue_type = NCR_700_change_queue_type;
 
@@ -611,9 +609,10 @@ NCR_700_scsi_done(struct NCR_700_Host_Parameters *hostdata,
 		struct NCR_700_command_slot *slot = 
 			(struct NCR_700_command_slot *)SCp->host_scribble;
 		
-		NCR_700_unmap(hostdata, SCp, slot);
+		dma_unmap_single(hostdata->dev, slot->pCmd,
+				 sizeof(SCp->cmnd), DMA_TO_DEVICE);
 		if (slot->flags == NCR_700_FLAG_AUTOSENSE) {
-			struct NCR_700_sense *sense = SCp->device->hostdata;
+			char *cmnd = NCR_700_get_sense_cmnd(SCp->device);
 #ifdef NCR_700_DEBUG
 			printk(" ORIGINAL CMD %p RETURNED %d, new return is %d sense is\n",
 			       SCp, SCp->cmnd[7], result);
@@ -624,10 +623,9 @@ NCR_700_scsi_done(struct NCR_700_Host_Parameters *hostdata,
 			/* restore the old result if the request sense was
 			 * successful */
 			if(result == 0)
-				result = sense->cmnd[7];
+				result = cmnd[7];
 		} else
-			dma_unmap_single(hostdata->dev, slot->pCmd,
-					 sizeof(SCp->cmnd), DMA_TO_DEVICE);
+			NCR_700_unmap(hostdata, SCp, slot);
 
 		free_slot(slot, hostdata);
 #ifdef NCR_700_DEBUG
@@ -969,14 +967,15 @@ process_script_interrupt(__u32 dsps, __u32 dsp, struct scsi_cmnd *SCp,
 		   status_byte(hostdata->status[0]) == COMMAND_TERMINATED) {
 			struct NCR_700_command_slot *slot =
 				(struct NCR_700_command_slot *)SCp->host_scribble;
-			if(SCp->cmnd[0] == REQUEST_SENSE) {
+			if(slot->flags == NCR_700_FLAG_AUTOSENSE) {
 				/* OOPS: bad device, returning another
 				 * contingent allegiance condition */
 				scmd_printk(KERN_ERR, SCp,
 					"broken device is looping in contingent allegiance: ignoring\n");
 				NCR_700_scsi_done(hostdata, SCp, hostdata->status[0]);
 			} else {
-				struct NCR_700_sense *sense = SCp->device->hostdata;
+				char *cmnd =
+					NCR_700_get_sense_cmnd(SCp->device);
 #ifdef NCR_DEBUG
 				scsi_print_command(SCp);
 				printk("  cmd %p has status %d, requesting sense\n",
@@ -994,21 +993,21 @@ process_script_interrupt(__u32 dsps, __u32 dsp, struct scsi_cmnd *SCp,
 						 sizeof(SCp->cmnd),
 						 DMA_TO_DEVICE);
 
-				sense->cmnd[0] = REQUEST_SENSE;
-				sense->cmnd[1] = (SCp->device->lun & 0x7) << 5;
-				sense->cmnd[2] = 0;
-				sense->cmnd[3] = 0;
-				sense->cmnd[4] = sizeof(SCp->sense_buffer);
-				sense->cmnd[5] = 0;
+				cmnd[0] = REQUEST_SENSE;
+				cmnd[1] = (SCp->device->lun & 0x7) << 5;
+				cmnd[2] = 0;
+				cmnd[3] = 0;
+				cmnd[4] = sizeof(SCp->sense_buffer);
+				cmnd[5] = 0;
 				/* Here's a quiet hack: the
 				 * REQUEST_SENSE command is six bytes,
 				 * so store a flag indicating that
 				 * this was an internal sense request
 				 * and the original status at the end
 				 * of the command */
-				sense->cmnd[6] = NCR_700_INTERNAL_SENSE_MAGIC;
-				sense->cmnd[7] = hostdata->status[0];
-				slot->pCmd = dma_map_single(hostdata->dev, sense->cmnd, sizeof(sense->cmnd), DMA_TO_DEVICE);
+				cmnd[6] = NCR_700_INTERNAL_SENSE_MAGIC;
+				cmnd[7] = hostdata->status[0];
+				slot->pCmd = dma_map_single(hostdata->dev, cmnd, MAX_COMMAND_SIZE, DMA_TO_DEVICE);
 				slot->dma_handle = dma_map_single(hostdata->dev, SCp->sense_buffer, sizeof(SCp->sense_buffer), DMA_FROM_DEVICE);
 				slot->SG[0].ins = bS_to_host(SCRIPT_MOVE_DATA_IN | sizeof(SCp->sense_buffer));
 				slot->SG[0].pAddr = bS_to_host(slot->dma_handle);
@@ -1530,7 +1529,7 @@ NCR_700_intr(int irq, void *dev_id, struct pt_regs *regs)
 
 			/* clear all the negotiated parameters */
 			__shost_for_each_device(SDp, host)
-				SDp->hostdata = NULL;
+				NCR_700_clear_flag(SDp, ~0);
 			
 			/* clear all the slots and their pending commands */
 			for(i = 0; i < NCR_700_COMMAND_SLOTS_PER_HOST; i++) {
@@ -2035,7 +2034,17 @@ NCR_700_set_offset(struct scsi_target *STp, int offset)
 	spi_flags(STp) |= NCR_700_DEV_PRINT_SYNC_NEGOTIATION;
 }
 
+STATIC int
+NCR_700_slave_alloc(struct scsi_device *SDp)
+{
+	SDp->hostdata = kzalloc(sizeof(struct NCR_700_Device_Parameters),
+				GFP_KERNEL);
 
+	if (!SDp->hostdata)
+		return -ENOMEM;
+
+	return 0;
+}
 
 STATIC int
 NCR_700_slave_configure(struct scsi_device *SDp)
@@ -2043,11 +2052,6 @@ NCR_700_slave_configure(struct scsi_device *SDp)
 	struct NCR_700_Host_Parameters *hostdata = 
 		(struct NCR_700_Host_Parameters *)SDp->host->hostdata[0];
 
-	SDp->hostdata = kmalloc(GFP_KERNEL, sizeof(struct NCR_700_sense));
-
-	if (!SDp->hostdata)
-		return -ENOMEM;
-
 	/* to do here: allocate memory; build a queue_full list */
 	if(SDp->tagged_supported) {
 		scsi_set_tag_type(SDp, MSG_ORDERED_TAG);

drivers/scsi/53c700.h

@@ -12,7 +12,7 @@
 #include <asm/io.h>
 
 #include <scsi/scsi_device.h>
-
+#include <scsi/scsi_cmnd.h>
 
 /* Turn on for general debugging---too verbose for normal use */
 #undef	NCR_700_DEBUG
@@ -76,11 +76,16 @@ struct NCR_700_SG_List {
 	#define	SCRIPT_RETURN			0x90080000
 };
 
-/* We use device->hostdata to store negotiated parameters.  This is
- * supposed to be a pointer to a device private area, but we cannot
- * really use it as such since it will never be freed, so just use the
- * 32 bits to cram the information.  The SYNC negotiation sequence looks
- * like:
+struct NCR_700_Device_Parameters {
+	/* space for creating a request sense command. Really, except
+	 * for the annoying SCSI-2 requirement for LUN information in
+	 * cmnd[1], this could be in static storage */
+	unsigned char cmnd[MAX_COMMAND_SIZE];
+	__u8	depth;
+};
+
+
+/* The SYNC negotiation sequence looks like:
  * 
  * If DEV_NEGOTIATED_SYNC not set, tack and SDTR message on to the
  * initial identify for the device and set DEV_BEGIN_SYNC_NEGOTATION
@@ -98,19 +103,26 @@ struct NCR_700_SG_List {
 #define NCR_700_DEV_BEGIN_SYNC_NEGOTIATION	(1<<17)
 #define NCR_700_DEV_PRINT_SYNC_NEGOTIATION (1<<19)
 
+static inline char *NCR_700_get_sense_cmnd(struct scsi_device *SDp)
+{
+	struct NCR_700_Device_Parameters *hostdata = SDp->hostdata;
+
+	return hostdata->cmnd;
+}
+
 static inline void
 NCR_700_set_depth(struct scsi_device *SDp, __u8 depth)
 {
-	long l = (long)SDp->hostdata;
+	struct NCR_700_Device_Parameters *hostdata = SDp->hostdata;
 
-	l &= 0xffff00ff;
-	l |= 0xff00 & (depth << 8);
-	SDp->hostdata = (void *)l;
+	hostdata->depth = depth;
 }
 static inline __u8
 NCR_700_get_depth(struct scsi_device *SDp)
 {
-	return ((((unsigned long)SDp->hostdata) & 0xff00)>>8);
+	struct NCR_700_Device_Parameters *hostdata = SDp->hostdata;
+
+	return hostdata->depth;
 }
 static inline int
 NCR_700_is_flag_set(struct scsi_device *SDp, __u32 flag)

drivers/scsi/aacraid/comminit.c

@@ -92,31 +92,7 @@ static int aac_alloc_comm(struct aac_dev *dev, void **commaddr, unsigned long co
 	init->AdapterFibsPhysicalAddress = cpu_to_le32((u32)phys);
 	init->AdapterFibsSize = cpu_to_le32(fibsize);
 	init->AdapterFibAlign = cpu_to_le32(sizeof(struct hw_fib));
-	/* 
-	 * number of 4k pages of host physical memory. The aacraid fw needs
-	 * this number to be less than 4gb worth of pages. num_physpages is in
-	 * system page units. New firmware doesn't have any issues with the
-	 * mapping system, but older Firmware did, and had *troubles* dealing
-	 * with the math overloading past 32 bits, thus we must limit this
-	 * field.
-	 *
-	 * This assumes the memory is mapped zero->n, which isnt
-	 * always true on real computers. It also has some slight problems
-	 * with the GART on x86-64. I've btw never tried DMA from PCI space
-	 * on this platform but don't be surprised if its problematic.
-	 * [AK: something is very very wrong when a driver tests this symbol.
- 	 *  Someone should figure out what the comment writer really meant here and fix
-	 *  the code. Or just remove that bad code. ]
-	 */
-#ifndef CONFIG_IOMMU
-	if ((num_physpages << (PAGE_SHIFT - 12)) <= AAC_MAX_HOSTPHYSMEMPAGES) {
-		init->HostPhysMemPages = 
-			cpu_to_le32(num_physpages << (PAGE_SHIFT-12));
-	} else 
-#endif	
-	{
-		init->HostPhysMemPages = cpu_to_le32(AAC_MAX_HOSTPHYSMEMPAGES);
-	}
+	init->HostPhysMemPages = cpu_to_le32(AAC_MAX_HOSTPHYSMEMPAGES);
 
 	init->InitFlags = 0;
 	if (dev->new_comm_interface) {

drivers/scsi/aic7xxx/aic79xx.h

@@ -1487,6 +1487,7 @@ typedef enum {
 } ahd_queue_alg;
 
 void			ahd_set_tags(struct ahd_softc *ahd,
+				     struct scsi_cmnd *cmd,
 				     struct ahd_devinfo *devinfo,
 				     ahd_queue_alg alg);
 

drivers/scsi/aic7xxx/aic79xx_core.c

@@ -1090,7 +1090,7 @@ ahd_handle_seqint(struct ahd_softc *ahd, u_int intstat)
 
 			/* Notify XPT */
 			ahd_send_async(ahd, devinfo.channel, devinfo.target,
-				       CAM_LUN_WILDCARD, AC_SENT_BDR, NULL);
+				       CAM_LUN_WILDCARD, AC_SENT_BDR);
 
 			/*
 			 * Allow the sequencer to continue with
@@ -3062,7 +3062,7 @@ ahd_set_syncrate(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
 		tinfo->curr.ppr_options = ppr_options;
 
 		ahd_send_async(ahd, devinfo->channel, devinfo->target,
-			       CAM_LUN_WILDCARD, AC_TRANSFER_NEG, NULL);
+			       CAM_LUN_WILDCARD, AC_TRANSFER_NEG);
 		if (bootverbose) {
 			if (offset != 0) {
 				int options;
@@ -3184,7 +3184,7 @@ ahd_set_width(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
 
 		tinfo->curr.width = width;
 		ahd_send_async(ahd, devinfo->channel, devinfo->target,
-			       CAM_LUN_WILDCARD, AC_TRANSFER_NEG, NULL);
+			       CAM_LUN_WILDCARD, AC_TRANSFER_NEG);
 		if (bootverbose) {
 			printf("%s: target %d using %dbit transfers\n",
 			       ahd_name(ahd), devinfo->target,
@@ -3211,12 +3211,14 @@ ahd_set_width(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
  * Update the current state of tagged queuing for a given target.
  */
 void
-ahd_set_tags(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
-	     ahd_queue_alg alg)
+ahd_set_tags(struct ahd_softc *ahd, struct scsi_cmnd *cmd,
+	     struct ahd_devinfo *devinfo, ahd_queue_alg alg)
 {
-	ahd_platform_set_tags(ahd, devinfo, alg);
+	struct scsi_device *sdev = cmd->device;
+
+	ahd_platform_set_tags(ahd, sdev, devinfo, alg);
 	ahd_send_async(ahd, devinfo->channel, devinfo->target,
-		       devinfo->lun, AC_TRANSFER_NEG, &alg);
+		       devinfo->lun, AC_TRANSFER_NEG);
 }
 
 static void
@@ -4746,7 +4748,7 @@ ahd_handle_msg_reject(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
 			printf("(%s:%c:%d:%d): refuses tagged commands.  "
 			       "Performing non-tagged I/O\n", ahd_name(ahd),
 			       devinfo->channel, devinfo->target, devinfo->lun);
-			ahd_set_tags(ahd, devinfo, AHD_QUEUE_NONE);
+			ahd_set_tags(ahd, scb->io_ctx, devinfo, AHD_QUEUE_NONE);
 			mask = ~0x23;
 		} else {
 			printf("(%s:%c:%d:%d): refuses %s tagged commands.  "
@@ -4754,7 +4756,7 @@ ahd_handle_msg_reject(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
 			       ahd_name(ahd), devinfo->channel, devinfo->target,
 			       devinfo->lun, tag_type == MSG_ORDERED_TASK
 			       ? "ordered" : "head of queue");
-			ahd_set_tags(ahd, devinfo, AHD_QUEUE_BASIC);
+			ahd_set_tags(ahd, scb->io_ctx, devinfo, AHD_QUEUE_BASIC);
 			mask = ~0x03;
 		}
 
@@ -5098,7 +5100,7 @@ ahd_handle_devreset(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
 	
 	if (status != CAM_SEL_TIMEOUT)
 		ahd_send_async(ahd, devinfo->channel, devinfo->target,
-			       CAM_LUN_WILDCARD, AC_SENT_BDR, NULL);
+			       CAM_LUN_WILDCARD, AC_SENT_BDR);
 
 	if (message != NULL && bootverbose)
 		printf("%s: %s on %c:%d. %d SCBs aborted\n", ahd_name(ahd),
@@ -7952,7 +7954,7 @@ ahd_reset_channel(struct ahd_softc *ahd, char channel, int initiate_reset)
 #endif
 	/* Notify the XPT that a bus reset occurred */
 	ahd_send_async(ahd, devinfo.channel, CAM_TARGET_WILDCARD,
-		       CAM_LUN_WILDCARD, AC_BUS_RESET, NULL);
+		       CAM_LUN_WILDCARD, AC_BUS_RESET);
 
 	/*
 	 * Revert to async/narrow transfers until we renegotiate.

drivers/scsi/aic7xxx/aic79xx_osm.c

@@ -484,7 +484,6 @@ ahd_linux_target_alloc(struct scsi_target *starget)
 	struct seeprom_config *sc = ahd->seep_config;
 	unsigned long flags;
 	struct scsi_target **ahd_targp = ahd_linux_target_in_softc(starget);
-	struct ahd_linux_target *targ = scsi_transport_target_data(starget);
 	struct ahd_devinfo devinfo;
 	struct ahd_initiator_tinfo *tinfo;
 	struct ahd_tmode_tstate *tstate;
@@ -495,7 +494,6 @@ ahd_linux_target_alloc(struct scsi_target *starget)
 	BUG_ON(*ahd_targp != NULL);
 
 	*ahd_targp = starget;
-	memset(targ, 0, sizeof(*targ));
 
 	if (sc) {
 		int flags = sc->device_flags[starget->id];
@@ -551,15 +549,11 @@ ahd_linux_slave_alloc(struct scsi_device *sdev)
 {
 	struct	ahd_softc *ahd =
 		*((struct ahd_softc **)sdev->host->hostdata);
-	struct scsi_target *starget = sdev->sdev_target;
-	struct ahd_linux_target *targ = scsi_transport_target_data(starget);
 	struct ahd_linux_device *dev;
 
 	if (bootverbose)
 		printf("%s: Slave Alloc %d\n", ahd_name(ahd), sdev->id);
 
-	BUG_ON(targ->sdev[sdev->lun] != NULL);
-
 	dev = scsi_transport_device_data(sdev);
 	memset(dev, 0, sizeof(*dev));
 
@@ -576,8 +570,6 @@ ahd_linux_slave_alloc(struct scsi_device *sdev)
 	 */
 	dev->maxtags = 0;
 	
-	targ->sdev[sdev->lun] = sdev;
-
 	return (0);
 }
 
@@ -599,23 +591,6 @@ ahd_linux_slave_configure(struct scsi_device *sdev)
 	return 0;
 }
 
-static void
-ahd_linux_slave_destroy(struct scsi_device *sdev)
-{
-	struct	ahd_softc *ahd;
-	struct	ahd_linux_device *dev = scsi_transport_device_data(sdev);
-	struct  ahd_linux_target *targ = scsi_transport_target_data(sdev->sdev_target);
-
-	ahd = *((struct ahd_softc **)sdev->host->hostdata);
-	if (bootverbose)
-		printf("%s: Slave Destroy %d\n", ahd_name(ahd), sdev->id);
-
-	BUG_ON(dev->active);
-
-	targ->sdev[sdev->lun] = NULL;
-
-}
-
 #if defined(__i386__)
 /*
  * Return the disk geometry for the given SCSI device.
@@ -822,7 +797,6 @@ struct scsi_host_template aic79xx_driver_template = {
 	.use_clustering		= ENABLE_CLUSTERING,
 	.slave_alloc		= ahd_linux_slave_alloc,
 	.slave_configure	= ahd_linux_slave_configure,
-	.slave_destroy		= ahd_linux_slave_destroy,
 	.target_alloc		= ahd_linux_target_alloc,
 	.target_destroy		= ahd_linux_target_destroy,
 };
@@ -1249,20 +1223,13 @@ void
 ahd_platform_free(struct ahd_softc *ahd)
 {
 	struct scsi_target *starget;
-	int i, j;
+	int i;
 
 	if (ahd->platform_data != NULL) {
 		/* destroy all of the device and target objects */
 		for (i = 0; i < AHD_NUM_TARGETS; i++) {
 			starget = ahd->platform_data->starget[i];
 			if (starget != NULL) {
-				for (j = 0; j < AHD_NUM_LUNS; j++) {
-					struct ahd_linux_target *targ =
-						scsi_transport_target_data(starget);
-					if (targ->sdev[j] == NULL)
-						continue;
-					targ->sdev[j] = NULL;
-				}
 				ahd->platform_data->starget[i] = NULL;
 			}
 		}
@@ -1318,20 +1285,13 @@ ahd_platform_freeze_devq(struct ahd_softc *ahd, struct scb *scb)
 }
 
 void
-ahd_platform_set_tags(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
-		      ahd_queue_alg alg)
+ahd_platform_set_tags(struct ahd_softc *ahd, struct scsi_device *sdev,
+		      struct ahd_devinfo *devinfo, ahd_queue_alg alg)
 {
-	struct scsi_target *starget;
-	struct ahd_linux_target *targ;
 	struct ahd_linux_device *dev;
-	struct scsi_device *sdev;
 	int was_queuing;
 	int now_queuing;
 
-	starget = ahd->platform_data->starget[devinfo->target];
-	targ = scsi_transport_target_data(starget);
-	BUG_ON(targ == NULL);
-	sdev = targ->sdev[devinfo->lun];
 	if (sdev == NULL)
 		return;
 
@@ -1467,11 +1427,15 @@ ahd_linux_device_queue_depth(struct scsi_device *sdev)
 	tags = ahd_linux_user_tagdepth(ahd, &devinfo);
 	if (tags != 0 && sdev->tagged_supported != 0) {
 
-		ahd_set_tags(ahd, &devinfo, AHD_QUEUE_TAGGED);
+		ahd_platform_set_tags(ahd, sdev, &devinfo, AHD_QUEUE_TAGGED);
+		ahd_send_async(ahd, devinfo.channel, devinfo.target,
+			       devinfo.lun, AC_TRANSFER_NEG);
 		ahd_print_devinfo(ahd, &devinfo);
 		printf("Tagged Queuing enabled.  Depth %d\n", tags);
 	} else {
-		ahd_set_tags(ahd, &devinfo, AHD_QUEUE_NONE);
+		ahd_platform_set_tags(ahd, sdev, &devinfo, AHD_QUEUE_NONE);
+		ahd_send_async(ahd, devinfo.channel, devinfo.target,
+			       devinfo.lun, AC_TRANSFER_NEG);
 	}
 }
 
@@ -1629,7 +1593,7 @@ ahd_linux_isr(int irq, void *dev_id, struct pt_regs * regs)
 
 void
 ahd_send_async(struct ahd_softc *ahd, char channel,
-	       u_int target, u_int lun, ac_code code, void *arg)
+	       u_int target, u_int lun, ac_code code)
 {
 	switch (code) {
 	case AC_TRANSFER_NEG:
@@ -1956,7 +1920,7 @@ ahd_linux_handle_scsi_status(struct ahd_softc *ahd,
 			}
 			ahd_set_transaction_status(scb, CAM_REQUEUE_REQ);
 			ahd_set_scsi_status(scb, SCSI_STATUS_OK);
-			ahd_platform_set_tags(ahd, &devinfo,
+			ahd_platform_set_tags(ahd, sdev, &devinfo,
 				     (dev->flags & AHD_DEV_Q_BASIC)
 				   ? AHD_QUEUE_BASIC : AHD_QUEUE_TAGGED);
 			break;
@@ -1966,7 +1930,7 @@ ahd_linux_handle_scsi_status(struct ahd_softc *ahd,
 		 * as if the target returned BUSY SCSI status.
 		 */
 		dev->openings = 1;
-		ahd_platform_set_tags(ahd, &devinfo,
+		ahd_platform_set_tags(ahd, sdev, &devinfo,
 			     (dev->flags & AHD_DEV_Q_BASIC)
 			   ? AHD_QUEUE_BASIC : AHD_QUEUE_TAGGED);
 		ahd_set_scsi_status(scb, SCSI_STATUS_BUSY);
@@ -2778,8 +2742,6 @@ ahd_linux_init(void)
 	if (!ahd_linux_transport_template)
 		return -ENODEV;
 
-	scsi_transport_reserve_target(ahd_linux_transport_template,
-				      sizeof(struct ahd_linux_target));
 	scsi_transport_reserve_device(ahd_linux_transport_template,
 				      sizeof(struct ahd_linux_device));
 

drivers/scsi/aic7xxx/aic79xx_osm.h

@@ -262,7 +262,6 @@ typedef enum {
 	AHD_DEV_PERIODIC_OTAG	 = 0x40, /* Send OTAG to prevent starvation */
 } ahd_linux_dev_flags;
 
-struct ahd_linux_target;
 struct ahd_linux_device {
 	TAILQ_ENTRY(ahd_linux_device) links;
 
@@ -342,12 +341,6 @@ struct ahd_linux_device {
 #define AHD_OTAG_THRESH	500
 };
 
-struct ahd_linux_target {
-	struct scsi_device	 *sdev[AHD_NUM_LUNS];
-	struct ahd_transinfo	  last_tinfo;
-	struct ahd_softc	 *ahd;
-};
-
 /********************* Definitions Required by the Core ***********************/
 /*
  * Number of SG segments we require.  So long as the S/G segments for
@@ -864,7 +857,7 @@ ahd_freeze_scb(struct scb *scb)
         }
 }
 
-void	ahd_platform_set_tags(struct ahd_softc *ahd,
+void	ahd_platform_set_tags(struct ahd_softc *ahd, struct scsi_device *sdev,
 			      struct ahd_devinfo *devinfo, ahd_queue_alg);
 int	ahd_platform_abort_scbs(struct ahd_softc *ahd, int target,
 				char channel, int lun, u_int tag,
@@ -873,7 +866,7 @@ irqreturn_t
 	ahd_linux_isr(int irq, void *dev_id, struct pt_regs * regs);
 void	ahd_done(struct ahd_softc*, struct scb*);
 void	ahd_send_async(struct ahd_softc *, char channel,
-		       u_int target, u_int lun, ac_code, void *);
+		       u_int target, u_int lun, ac_code);
 void	ahd_print_path(struct ahd_softc *, struct scb *);
 
 #ifdef CONFIG_PCI

drivers/scsi/aic7xxx/aic79xx_proc.c

@@ -47,7 +47,7 @@ static int	copy_info(struct info_str *info, char *fmt, ...);
 static void	ahd_dump_target_state(struct ahd_softc *ahd,
 				      struct info_str *info,
 				      u_int our_id, char channel,
-				      u_int target_id, u_int target_offset);
+				      u_int target_id);
 static void	ahd_dump_device_state(struct info_str *info,
 				      struct scsi_device *sdev);
 static int	ahd_proc_write_seeprom(struct ahd_softc *ahd,
@@ -204,10 +204,8 @@ ahd_format_transinfo(struct info_str *info, struct ahd_transinfo *tinfo)
 
 static void
 ahd_dump_target_state(struct ahd_softc *ahd, struct info_str *info,
-		      u_int our_id, char channel, u_int target_id,
-		      u_int target_offset)
+		      u_int our_id, char channel, u_int target_id)
 {
-	struct	ahd_linux_target *targ;
 	struct  scsi_target *starget;
 	struct	ahd_initiator_tinfo *tinfo;
 	struct	ahd_tmode_tstate *tstate;
@@ -218,10 +216,9 @@ ahd_dump_target_state(struct ahd_softc *ahd, struct info_str *info,
 	copy_info(info, "Target %d Negotiation Settings\n", target_id);
 	copy_info(info, "\tUser: ");
 	ahd_format_transinfo(info, &tinfo->user);
-	starget = ahd->platform_data->starget[target_offset];
+	starget = ahd->platform_data->starget[target_id];
 	if (starget == NULL)
 		return;
-	targ = scsi_transport_target_data(starget);
 
 	copy_info(info, "\tGoal: ");
 	ahd_format_transinfo(info, &tinfo->goal);
@@ -231,7 +228,7 @@ ahd_dump_target_state(struct ahd_softc *ahd, struct info_str *info,
 	for (lun = 0; lun < AHD_NUM_LUNS; lun++) {
 		struct scsi_device *dev;
 
-		dev = targ->sdev[lun];
+		dev = scsi_device_lookup_by_target(starget, lun);
 
 		if (dev == NULL)
 			continue;
@@ -355,7 +352,7 @@ ahd_linux_proc_info(struct Scsi_Host *shost, char *buffer, char **start,
 	copy_info(&info, "Allocated SCBs: %d, SG List Length: %d\n\n",
 		  ahd->scb_data.numscbs, AHD_NSEG);
 
-	max_targ = 15;
+	max_targ = 16;
 
 	if (ahd->seep_config == NULL)
 		copy_info(&info, "No Serial EEPROM\n");
@@ -373,12 +370,12 @@ ahd_linux_proc_info(struct Scsi_Host *shost, char *buffer, char **start,
 	copy_info(&info, "\n");
 
 	if ((ahd->features & AHD_WIDE) == 0)
-		max_targ = 7;
+		max_targ = 8;
 
-	for (i = 0; i <= max_targ; i++) {
+	for (i = 0; i < max_targ; i++) {
 
 		ahd_dump_target_state(ahd, &info, ahd->our_id, 'A',
-				      /*target_id*/i, /*target_offset*/i);
+				      /*target_id*/i);
 	}
 	retval = info.pos > info.offset ? info.pos - info.offset : 0;
 done:

drivers/scsi/atp870u.c

@@ -2625,29 +2625,32 @@ static int atp870u_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	unsigned int base_io, tmport, error,n;
 	unsigned char host_id;
 	struct Scsi_Host *shpnt = NULL;
-	struct atp_unit atp_dev, *p;
+	struct atp_unit *atpdev, *p;
 	unsigned char setupdata[2][16];
 	int count = 0;
-	
+
+	atpdev = kzalloc(sizeof(*atpdev), GFP_KERNEL);
+	if (!atpdev)
+		return -ENOMEM;
+
 	if (pci_enable_device(pdev))
-		return -EIO;
+		goto err_eio;
 
         if (!pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
                 printk(KERN_INFO "atp870u: use 32bit DMA mask.\n");
         } else {
                 printk(KERN_ERR "atp870u: DMA mask required but not available.\n");
-                return -EIO;
+		goto err_eio;
         }
 
-	memset(&atp_dev, 0, sizeof atp_dev);
 	/*
 	 * It's probably easier to weed out some revisions like
 	 * this than via the PCI device table
 	 */
 	if (ent->device == PCI_DEVICE_ID_ARTOP_AEC7610) {
-		error = pci_read_config_byte(pdev, PCI_CLASS_REVISION, &atp_dev.chip_ver);
-		if (atp_dev.chip_ver < 2)
-			return -EIO;
+		error = pci_read_config_byte(pdev, PCI_CLASS_REVISION, &atpdev->chip_ver);
+		if (atpdev->chip_ver < 2)
+			goto err_eio;
 	}
 
 	switch (ent->device) {
@@ -2656,15 +2659,15 @@ static int atp870u_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	case ATP880_DEVID1:	
 	case ATP880_DEVID2:	
 	case ATP885_DEVID:	
-		atp_dev.chip_ver = 0x04;
+		atpdev->chip_ver = 0x04;
 	default:
 		break;
 	}
 	base_io = pci_resource_start(pdev, 0);
 	base_io &= 0xfffffff8;
-	
+
 	if ((ent->device == ATP880_DEVID1)||(ent->device == ATP880_DEVID2)) {
-		error = pci_read_config_byte(pdev, PCI_CLASS_REVISION, &atp_dev.chip_ver);
+		error = pci_read_config_byte(pdev, PCI_CLASS_REVISION, &atpdev->chip_ver);
 		pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x80);//JCC082803
 
 		host_id = inb(base_io + 0x39);
@@ -2672,17 +2675,17 @@ static int atp870u_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 		printk(KERN_INFO "   ACARD AEC-67160 PCI Ultra3 LVD Host Adapter: %d"
 			"    IO:%x, IRQ:%d.\n", count, base_io, pdev->irq);
-		atp_dev.ioport[0] = base_io + 0x40;
-		atp_dev.pciport[0] = base_io + 0x28;
-		atp_dev.dev_id = ent->device;
-		atp_dev.host_id[0] = host_id;
+		atpdev->ioport[0] = base_io + 0x40;
+		atpdev->pciport[0] = base_io + 0x28;
+		atpdev->dev_id = ent->device;
+		atpdev->host_id[0] = host_id;
 
 		tmport = base_io + 0x22;
-		atp_dev.scam_on = inb(tmport);
+		atpdev->scam_on = inb(tmport);
 		tmport += 0x13;
-		atp_dev.global_map[0] = inb(tmport);
+		atpdev->global_map[0] = inb(tmport);
 		tmport += 0x07;
-		atp_dev.ultra_map[0] = inw(tmport);
+		atpdev->ultra_map[0] = inw(tmport);
 
 		n = 0x3f09;
 next_fblk_880:
@@ -2695,57 +2698,57 @@ next_fblk_880:
 		if (inb(base_io + 0x30) == 0xff)
 			goto flash_ok_880;
 
-		atp_dev.sp[0][m++] = inb(base_io + 0x30);
-		atp_dev.sp[0][m++] = inb(base_io + 0x31);
-		atp_dev.sp[0][m++] = inb(base_io + 0x32);
-		atp_dev.sp[0][m++] = inb(base_io + 0x33);
+		atpdev->sp[0][m++] = inb(base_io + 0x30);
+		atpdev->sp[0][m++] = inb(base_io + 0x31);
+		atpdev->sp[0][m++] = inb(base_io + 0x32);
+		atpdev->sp[0][m++] = inb(base_io + 0x33);
 		outw(n, base_io + 0x34);
 		n += 0x0002;
-		atp_dev.sp[0][m++] = inb(base_io + 0x30);
-		atp_dev.sp[0][m++] = inb(base_io + 0x31);
-		atp_dev.sp[0][m++] = inb(base_io + 0x32);
-		atp_dev.sp[0][m++] = inb(base_io + 0x33);
+		atpdev->sp[0][m++] = inb(base_io + 0x30);
+		atpdev->sp[0][m++] = inb(base_io + 0x31);
+		atpdev->sp[0][m++] = inb(base_io + 0x32);
+		atpdev->sp[0][m++] = inb(base_io + 0x33);
 		outw(n, base_io + 0x34);
 		n += 0x0002;
-		atp_dev.sp[0][m++] = inb(base_io + 0x30);
-		atp_dev.sp[0][m++] = inb(base_io + 0x31);
-		atp_dev.sp[0][m++] = inb(base_io + 0x32);
-		atp_dev.sp[0][m++] = inb(base_io + 0x33);
+		atpdev->sp[0][m++] = inb(base_io + 0x30);
+		atpdev->sp[0][m++] = inb(base_io + 0x31);
+		atpdev->sp[0][m++] = inb(base_io + 0x32);
+		atpdev->sp[0][m++] = inb(base_io + 0x33);
 		outw(n, base_io + 0x34);
 		n += 0x0002;
-		atp_dev.sp[0][m++] = inb(base_io + 0x30);
-		atp_dev.sp[0][m++] = inb(base_io + 0x31);
-		atp_dev.sp[0][m++] = inb(base_io + 0x32);
-		atp_dev.sp[0][m++] = inb(base_io + 0x33);
+		atpdev->sp[0][m++] = inb(base_io + 0x30);
+		atpdev->sp[0][m++] = inb(base_io + 0x31);
+		atpdev->sp[0][m++] = inb(base_io + 0x32);
+		atpdev->sp[0][m++] = inb(base_io + 0x33);
 		n += 0x0018;
 		goto next_fblk_880;
 flash_ok_880:
 		outw(0, base_io + 0x34);
-		atp_dev.ultra_map[0] = 0;
-		atp_dev.async[0] = 0;
+		atpdev->ultra_map[0] = 0;
+		atpdev->async[0] = 0;
 		for (k = 0; k < 16; k++) {
 			n = 1;
 			n = n << k;
-			if (atp_dev.sp[0][k] > 1) {
-				atp_dev.ultra_map[0] |= n;
+			if (atpdev->sp[0][k] > 1) {
+				atpdev->ultra_map[0] |= n;
 			} else {
-				if (atp_dev.sp[0][k] == 0)
-					atp_dev.async[0] |= n;
+				if (atpdev->sp[0][k] == 0)
+					atpdev->async[0] |= n;
  			}
 	 	}
-		atp_dev.async[0] = ~(atp_dev.async[0]);
-		outb(atp_dev.global_map[0], base_io + 0x35);
+		atpdev->async[0] = ~(atpdev->async[0]);
+		outb(atpdev->global_map[0], base_io + 0x35);
  
 		shpnt = scsi_host_alloc(&atp870u_template, sizeof(struct atp_unit));
 		if (!shpnt)
-			return -ENOMEM;
+			goto err_nomem;
 
 		p = (struct atp_unit *)&shpnt->hostdata;
 
-		atp_dev.host = shpnt;
-		atp_dev.pdev = pdev;
+		atpdev->host = shpnt;
+		atpdev->pdev = pdev;
 		pci_set_drvdata(pdev, p);
-		memcpy(p, &atp_dev, sizeof atp_dev);
+		memcpy(p, atpdev, sizeof(*atpdev));
 		if (atp870u_init_tables(shpnt) < 0) {
 			printk(KERN_ERR "Unable to allocate tables for Acard controller\n");
 			goto unregister;
@@ -2798,24 +2801,24 @@ flash_ok_880:
 			printk(KERN_INFO "   ACARD AEC-67162 PCI Ultra3 LVD Host Adapter:  IO:%x, IRQ:%d.\n"
 			       , base_io, pdev->irq);
         	
-		atp_dev.pdev = pdev;	
-		atp_dev.dev_id  = ent->device;
-		atp_dev.baseport = base_io;
-		atp_dev.ioport[0] = base_io + 0x80;
-		atp_dev.ioport[1] = base_io + 0xc0;
-		atp_dev.pciport[0] = base_io + 0x40;
-		atp_dev.pciport[1] = base_io + 0x50;
+		atpdev->pdev = pdev;
+		atpdev->dev_id  = ent->device;
+		atpdev->baseport = base_io;
+		atpdev->ioport[0] = base_io + 0x80;
+		atpdev->ioport[1] = base_io + 0xc0;
+		atpdev->pciport[0] = base_io + 0x40;
+		atpdev->pciport[1] = base_io + 0x50;
 				
 		shpnt = scsi_host_alloc(&atp870u_template, sizeof(struct atp_unit));
 		if (!shpnt)
-			return -ENOMEM;
+			goto err_nomem;
         	
 		p = (struct atp_unit *)&shpnt->hostdata;
         	
-		atp_dev.host = shpnt;
-		atp_dev.pdev = pdev;
+		atpdev->host = shpnt;
+		atpdev->pdev = pdev;
 		pci_set_drvdata(pdev, p);
-		memcpy(p, &atp_dev, sizeof(struct atp_unit));
+		memcpy(p, atpdev, sizeof(struct atp_unit));
 		if (atp870u_init_tables(shpnt) < 0)
 			goto unregister;
 			
@@ -2974,33 +2977,33 @@ flash_ok_885:
 		printk(KERN_INFO "   ACARD AEC-671X PCI Ultra/W SCSI-2/3 Host Adapter: %d "
 			"IO:%x, IRQ:%d.\n", count, base_io, pdev->irq);
 
-		atp_dev.ioport[0] = base_io;
-		atp_dev.pciport[0] = base_io + 0x20;
-		atp_dev.dev_id = ent->device;
+		atpdev->ioport[0] = base_io;
+		atpdev->pciport[0] = base_io + 0x20;
+		atpdev->dev_id = ent->device;
 		host_id &= 0x07;
-		atp_dev.host_id[0] = host_id;
+		atpdev->host_id[0] = host_id;
 		tmport = base_io + 0x22;
-		atp_dev.scam_on = inb(tmport);
+		atpdev->scam_on = inb(tmport);
 		tmport += 0x0b;
-		atp_dev.global_map[0] = inb(tmport++);
-		atp_dev.ultra_map[0] = inw(tmport);
+		atpdev->global_map[0] = inb(tmport++);
+		atpdev->ultra_map[0] = inw(tmport);
 
-		if (atp_dev.ultra_map[0] == 0) {
-			atp_dev.scam_on = 0x00;
-			atp_dev.global_map[0] = 0x20;
-			atp_dev.ultra_map[0] = 0xffff;
+		if (atpdev->ultra_map[0] == 0) {
+			atpdev->scam_on = 0x00;
+			atpdev->global_map[0] = 0x20;
+			atpdev->ultra_map[0] = 0xffff;
 		}
 
 		shpnt = scsi_host_alloc(&atp870u_template, sizeof(struct atp_unit));
 		if (!shpnt)
-			return -ENOMEM;
+			goto err_nomem;
 
 		p = (struct atp_unit *)&shpnt->hostdata;
 		
-		atp_dev.host = shpnt;
-		atp_dev.pdev = pdev;
+		atpdev->host = shpnt;
+		atpdev->pdev = pdev;
 		pci_set_drvdata(pdev, p);
-		memcpy(p, &atp_dev, sizeof atp_dev);
+		memcpy(p, atpdev, sizeof(*atpdev));
 		if (atp870u_init_tables(shpnt) < 0)
 			goto unregister;
 
@@ -3010,7 +3013,7 @@ flash_ok_885:
 		}
 
 		spin_lock_irqsave(shpnt->host_lock, flags);
-		if (atp_dev.chip_ver > 0x07) {	/* check if atp876 chip then enable terminator */
+		if (atpdev->chip_ver > 0x07) {	/* check if atp876 chip then enable terminator */
 			tmport = base_io + 0x3e;
 			outb(0x00, tmport);
 		}
@@ -3044,7 +3047,7 @@ flash_ok_885:
 		outb((inb(tmport) & 0xef), tmport);
 		tmport++;
 		outb((inb(tmport) | 0x20), tmport);
-		if (atp_dev.chip_ver == 4)
+		if (atpdev->chip_ver == 4)
 			shpnt->max_id = 16;
 		else		
 			shpnt->max_id = 8;
@@ -3093,6 +3096,12 @@ unregister:
 	printk("atp870u_prob:unregister\n");
 	scsi_host_put(shpnt);
 	return -1;		
+err_eio:
+	kfree(atpdev);
+	return -EIO;
+err_nomem:
+	kfree(atpdev);
+	return -ENOMEM;
 }
 
 /* The abort command does not leave the device in a clean state where

drivers/scsi/ibmvscsi/ibmvscsi.c

@@ -535,6 +535,7 @@ static int ibmvscsi_send_srp_event(struct srp_event_struct *evt_struct,
 				   struct ibmvscsi_host_data *hostdata)
 {
 	u64 *crq_as_u64 = (u64 *) &evt_struct->crq;
+	int request_status;
 	int rc;
 
 	/* If we have exhausted our request limit, just fail this request.
@@ -542,9 +543,18 @@ static int ibmvscsi_send_srp_event(struct srp_event_struct *evt_struct,
 	 * (such as task management requests) that the mid layer may think we
 	 * can handle more requests (can_queue) when we actually can't
 	 */
-	if ((evt_struct->crq.format == VIOSRP_SRP_FORMAT) &&
-	    (atomic_dec_if_positive(&hostdata->request_limit) < 0))
-		goto send_error;
+	if (evt_struct->crq.format == VIOSRP_SRP_FORMAT) {
+		request_status =
+			atomic_dec_if_positive(&hostdata->request_limit);
+		/* If request limit was -1 when we started, it is now even
+		 * less than that
+		 */
+		if (request_status < -1)
+			goto send_error;
+		/* Otherwise, if we have run out of requests */
+		else if (request_status < 0)
+			goto send_busy;
+	}
 
 	/* Copy the IU into the transfer area */
 	*evt_struct->xfer_iu = evt_struct->iu;
@@ -567,11 +577,23 @@ static int ibmvscsi_send_srp_event(struct srp_event_struct *evt_struct,
 
 	return 0;
 
- send_error:
+ send_busy:
 	unmap_cmd_data(&evt_struct->iu.srp.cmd, evt_struct, hostdata->dev);
 
 	free_event_struct(&hostdata->pool, evt_struct);
  	return SCSI_MLQUEUE_HOST_BUSY;
+
+ send_error:
+	unmap_cmd_data(&evt_struct->iu.srp.cmd, evt_struct, hostdata->dev);
+
+	if (evt_struct->cmnd != NULL) {
+		evt_struct->cmnd->result = DID_ERROR << 16;
+		evt_struct->cmnd_done(evt_struct->cmnd);
+	} else if (evt_struct->done)
+		evt_struct->done(evt_struct);
+
+	free_event_struct(&hostdata->pool, evt_struct);
+	return 0;
 }
 
 /**
@@ -1184,27 +1206,37 @@ void ibmvscsi_handle_crq(struct viosrp_crq *crq,
 		return;
 	case 0xFF:	/* Hypervisor telling us the connection is closed */
 		scsi_block_requests(hostdata->host);
+		atomic_set(&hostdata->request_limit, 0);
 		if (crq->format == 0x06) {
 			/* We need to re-setup the interpartition connection */
 			printk(KERN_INFO
 			       "ibmvscsi: Re-enabling adapter!\n");
-			atomic_set(&hostdata->request_limit, -1);
 			purge_requests(hostdata, DID_REQUEUE);
-			if (ibmvscsi_reenable_crq_queue(&hostdata->queue,
-							hostdata) == 0)
-				if (ibmvscsi_send_crq(hostdata,
-						      0xC001000000000000LL, 0))
+			if ((ibmvscsi_reenable_crq_queue(&hostdata->queue,
+							hostdata) == 0) ||
+			    (ibmvscsi_send_crq(hostdata,
+					       0xC001000000000000LL, 0))) {
+					atomic_set(&hostdata->request_limit,
+						   -1);
 					printk(KERN_ERR
-					       "ibmvscsi: transmit error after"
+					       "ibmvscsi: error after"
 					       " enable\n");
+			}
 		} else {
 			printk(KERN_INFO
 			       "ibmvscsi: Virtual adapter failed rc %d!\n",
 			       crq->format);
 
-			atomic_set(&hostdata->request_limit, -1);
 			purge_requests(hostdata, DID_ERROR);
-			ibmvscsi_reset_crq_queue(&hostdata->queue, hostdata);
+			if ((ibmvscsi_reset_crq_queue(&hostdata->queue,
+							hostdata)) ||
+			    (ibmvscsi_send_crq(hostdata,
+					       0xC001000000000000LL, 0))) {
+					atomic_set(&hostdata->request_limit,
+						   -1);
+					printk(KERN_ERR
+					       "ibmvscsi: error after reset\n");
+			}
 		}
 		scsi_unblock_requests(hostdata->host);
 		return;
@@ -1467,6 +1499,7 @@ static int ibmvscsi_probe(struct vio_dev *vdev, const struct vio_device_id *id)
 	struct Scsi_Host *host;
 	struct device *dev = &vdev->dev;
 	unsigned long wait_switch = 0;
+	int rc;
 
 	vdev->dev.driver_data = NULL;
 
@@ -1484,8 +1517,8 @@ static int ibmvscsi_probe(struct vio_dev *vdev, const struct vio_device_id *id)
 	atomic_set(&hostdata->request_limit, -1);
 	hostdata->host->max_sectors = 32 * 8; /* default max I/O 32 pages */
 
-	if (ibmvscsi_init_crq_queue(&hostdata->queue, hostdata,
-				    max_requests) != 0) {
+	rc = ibmvscsi_init_crq_queue(&hostdata->queue, hostdata, max_requests);
+	if (rc != 0 && rc != H_RESOURCE) {
 		printk(KERN_ERR "ibmvscsi: couldn't initialize crq\n");
 		goto init_crq_failed;
 	}
@@ -1505,7 +1538,8 @@ static int ibmvscsi_probe(struct vio_dev *vdev, const struct vio_device_id *id)
 	 * to fail if the other end is not acive.  In that case we don't
 	 * want to scan
 	 */
-	if (ibmvscsi_send_crq(hostdata, 0xC001000000000000LL, 0) == 0) {
+	if (ibmvscsi_send_crq(hostdata, 0xC001000000000000LL, 0) == 0
+	    || rc == H_RESOURCE) {
 		/*
 		 * Wait around max init_timeout secs for the adapter to finish
 		 * initializing. When we are done initializing, we will have a

drivers/scsi/ibmvscsi/rpa_vscsi.c

@@ -208,6 +208,7 @@ int ibmvscsi_init_crq_queue(struct crq_queue *queue,
 			    int max_requests)
 {
 	int rc;
+	int retrc;
 	struct vio_dev *vdev = to_vio_dev(hostdata->dev);
 
 	queue->msgs = (struct viosrp_crq *)get_zeroed_page(GFP_KERNEL);
@@ -226,7 +227,7 @@ int ibmvscsi_init_crq_queue(struct crq_queue *queue,
 	gather_partition_info();
 	set_adapter_info(hostdata);
 
-	rc = plpar_hcall_norets(H_REG_CRQ,
+	retrc = rc = plpar_hcall_norets(H_REG_CRQ,
 				vdev->unit_address,
 				queue->msg_token, PAGE_SIZE);
 	if (rc == H_RESOURCE)
@@ -263,7 +264,7 @@ int ibmvscsi_init_crq_queue(struct crq_queue *queue,
 	tasklet_init(&hostdata->srp_task, (void *)ibmvscsi_task,
 		     (unsigned long)hostdata);
 
-	return 0;
+	return retrc;
 
       req_irq_failed:
 	do {

drivers/scsi/iscsi_tcp.c

@@ -2130,19 +2130,21 @@ iscsi_r2tpool_free(struct iscsi_session *session)
 
 static int
 iscsi_conn_set_param(struct iscsi_cls_conn *cls_conn, enum iscsi_param param,
-		     uint32_t value)
+		     char *buf, int buflen)
 {
 	struct iscsi_conn *conn = cls_conn->dd_data;
 	struct iscsi_session *session = conn->session;
 	struct iscsi_tcp_conn *tcp_conn = conn->dd_data;
+	int value;
 
 	switch(param) {
 	case ISCSI_PARAM_MAX_RECV_DLENGTH: {
 		char *saveptr = tcp_conn->data;
 		gfp_t flags = GFP_KERNEL;
 
+		sscanf(buf, "%d", &value);
 		if (tcp_conn->data_size >= value) {
-			conn->max_recv_dlength = value;
+			iscsi_set_param(cls_conn, param, buf, buflen);
 			break;
 		}
 
@@ -2165,15 +2167,12 @@ iscsi_conn_set_param(struct iscsi_cls_conn *cls_conn, enum iscsi_param param,
 		else
 			free_pages((unsigned long)saveptr,
 				   get_order(tcp_conn->data_size));
-		conn->max_recv_dlength = value;
+		iscsi_set_param(cls_conn, param, buf, buflen);
 		tcp_conn->data_size = value;
-		}
-		break;
-	case ISCSI_PARAM_MAX_XMIT_DLENGTH:
-		conn->max_xmit_dlength =  value;
 		break;
+		}
 	case ISCSI_PARAM_HDRDGST_EN:
-		conn->hdrdgst_en = value;
+		iscsi_set_param(cls_conn, param, buf, buflen);
 		tcp_conn->hdr_size = sizeof(struct iscsi_hdr);
 		if (conn->hdrdgst_en) {
 			tcp_conn->hdr_size += sizeof(__u32);
@@ -2197,7 +2196,7 @@ iscsi_conn_set_param(struct iscsi_cls_conn *cls_conn, enum iscsi_param param,
 		}
 		break;
 	case ISCSI_PARAM_DATADGST_EN:
-		conn->datadgst_en = value;
+		iscsi_set_param(cls_conn, param, buf, buflen);
 		if (conn->datadgst_en) {
 			if (!tcp_conn->data_tx_tfm)
 				tcp_conn->data_tx_tfm =
@@ -2220,121 +2219,36 @@ iscsi_conn_set_param(struct iscsi_cls_conn *cls_conn, enum iscsi_param param,
 		tcp_conn->sendpage = conn->datadgst_en ?
 			sock_no_sendpage : tcp_conn->sock->ops->sendpage;
 		break;
-	case ISCSI_PARAM_INITIAL_R2T_EN:
-		session->initial_r2t_en = value;
-		break;
 	case ISCSI_PARAM_MAX_R2T:
+		sscanf(buf, "%d", &value);
 		if (session->max_r2t == roundup_pow_of_two(value))
 			break;
 		iscsi_r2tpool_free(session);
-		session->max_r2t = value;
+		iscsi_set_param(cls_conn, param, buf, buflen);
 		if (session->max_r2t & (session->max_r2t - 1))
 			session->max_r2t = roundup_pow_of_two(session->max_r2t);
 		if (iscsi_r2tpool_alloc(session))
 			return -ENOMEM;
 		break;
-	case ISCSI_PARAM_IMM_DATA_EN:
-		session->imm_data_en = value;
-		break;
-	case ISCSI_PARAM_FIRST_BURST:
-		session->first_burst = value;
-		break;
-	case ISCSI_PARAM_MAX_BURST:
-		session->max_burst = value;
-		break;
-	case ISCSI_PARAM_PDU_INORDER_EN:
-		session->pdu_inorder_en = value;
-		break;
-	case ISCSI_PARAM_DATASEQ_INORDER_EN:
-		session->dataseq_inorder_en = value;
-		break;
-	case ISCSI_PARAM_ERL:
-		session->erl = value;
-		break;
-	case ISCSI_PARAM_IFMARKER_EN:
-		BUG_ON(value);
-		session->ifmarker_en = value;
-		break;
-	case ISCSI_PARAM_OFMARKER_EN:
-		BUG_ON(value);
-		session->ofmarker_en = value;
-		break;
-	case ISCSI_PARAM_EXP_STATSN:
-		conn->exp_statsn = value;
-		break;
-	default:
-		break;
-	}
-
-	return 0;
-}
-
-static int
-iscsi_session_get_param(struct iscsi_cls_session *cls_session,
-			enum iscsi_param param, uint32_t *value)
-{
-	struct Scsi_Host *shost = iscsi_session_to_shost(cls_session);
-	struct iscsi_session *session = iscsi_hostdata(shost->hostdata);
-
-	switch(param) {
-	case ISCSI_PARAM_INITIAL_R2T_EN:
-		*value = session->initial_r2t_en;
-		break;
-	case ISCSI_PARAM_MAX_R2T:
-		*value = session->max_r2t;
-		break;
-	case ISCSI_PARAM_IMM_DATA_EN:
-		*value = session->imm_data_en;
-		break;
-	case ISCSI_PARAM_FIRST_BURST:
-		*value = session->first_burst;
-		break;
-	case ISCSI_PARAM_MAX_BURST:
-		*value = session->max_burst;
-		break;
-	case ISCSI_PARAM_PDU_INORDER_EN:
-		*value = session->pdu_inorder_en;
-		break;
-	case ISCSI_PARAM_DATASEQ_INORDER_EN:
-		*value = session->dataseq_inorder_en;
-		break;
-	case ISCSI_PARAM_ERL:
-		*value = session->erl;
-		break;
-	case ISCSI_PARAM_IFMARKER_EN:
-		*value = session->ifmarker_en;
-		break;
-	case ISCSI_PARAM_OFMARKER_EN:
-		*value = session->ofmarker_en;
-		break;
 	default:
-		return -EINVAL;
+		return iscsi_set_param(cls_conn, param, buf, buflen);
 	}
 
 	return 0;
 }
 
 static int
-iscsi_conn_get_param(struct iscsi_cls_conn *cls_conn,
-		     enum iscsi_param param, uint32_t *value)
+iscsi_tcp_conn_get_param(struct iscsi_cls_conn *cls_conn,
+			 enum iscsi_param param, char *buf)
 {
 	struct iscsi_conn *conn = cls_conn->dd_data;
 	struct iscsi_tcp_conn *tcp_conn = conn->dd_data;
 	struct inet_sock *inet;
+	struct ipv6_pinfo *np;
+	struct sock *sk;
+	int len;
 
 	switch(param) {
-	case ISCSI_PARAM_MAX_RECV_DLENGTH:
-		*value = conn->max_recv_dlength;
-		break;
-	case ISCSI_PARAM_MAX_XMIT_DLENGTH:
-		*value = conn->max_xmit_dlength;
-		break;
-	case ISCSI_PARAM_HDRDGST_EN:
-		*value = conn->hdrdgst_en;
-		break;
-	case ISCSI_PARAM_DATADGST_EN:
-		*value = conn->datadgst_en;
-		break;
 	case ISCSI_PARAM_CONN_PORT:
 		mutex_lock(&conn->xmitmutex);
 		if (!tcp_conn->sock) {
@@ -2343,30 +2257,9 @@ iscsi_conn_get_param(struct iscsi_cls_conn *cls_conn,
 		}
 
 		inet = inet_sk(tcp_conn->sock->sk);
-		*value = be16_to_cpu(inet->dport);
+		len = sprintf(buf, "%hu\n", be16_to_cpu(inet->dport));
 		mutex_unlock(&conn->xmitmutex);
-	case ISCSI_PARAM_EXP_STATSN:
-		*value = conn->exp_statsn;
 		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int
-iscsi_conn_get_str_param(struct iscsi_cls_conn *cls_conn,
-			 enum iscsi_param param, char *buf)
-{
-	struct iscsi_conn *conn = cls_conn->dd_data;
-	struct iscsi_tcp_conn *tcp_conn = conn->dd_data;
-	struct sock *sk;
-	struct inet_sock *inet;
-	struct ipv6_pinfo *np;
-	int len = 0;
-
-	switch (param) {
 	case ISCSI_PARAM_CONN_ADDRESS:
 		mutex_lock(&conn->xmitmutex);
 		if (!tcp_conn->sock) {
@@ -2388,7 +2281,7 @@ iscsi_conn_get_str_param(struct iscsi_cls_conn *cls_conn,
 		mutex_unlock(&conn->xmitmutex);
 		break;
 	default:
-		return -EINVAL;
+		return iscsi_conn_get_param(cls_conn, param, buf);
 	}
 
 	return len;
@@ -2501,7 +2394,11 @@ static struct iscsi_transport iscsi_tcp_transport = {
 				  ISCSI_ERL |
 				  ISCSI_CONN_PORT |
 				  ISCSI_CONN_ADDRESS |
-				  ISCSI_EXP_STATSN,
+				  ISCSI_EXP_STATSN |
+				  ISCSI_PERSISTENT_PORT |
+				  ISCSI_PERSISTENT_ADDRESS |
+				  ISCSI_TARGET_NAME |
+				  ISCSI_TPGT,
 	.host_template		= &iscsi_sht,
 	.conndata_size		= sizeof(struct iscsi_conn),
 	.max_conn		= 1,
@@ -2514,8 +2411,7 @@ static struct iscsi_transport iscsi_tcp_transport = {
 	.bind_conn		= iscsi_tcp_conn_bind,
 	.destroy_conn		= iscsi_tcp_conn_destroy,
 	.set_param		= iscsi_conn_set_param,
-	.get_conn_param		= iscsi_conn_get_param,
-	.get_conn_str_param	= iscsi_conn_get_str_param,
+	.get_conn_param		= iscsi_tcp_conn_get_param,
 	.get_session_param	= iscsi_session_get_param,
 	.start_conn		= iscsi_conn_start,
 	.stop_conn		= iscsi_conn_stop,

drivers/scsi/libiscsi.c

@@ -1287,13 +1287,18 @@ iscsi_session_setup(struct iscsi_transport *iscsit,
 	if (scsi_add_host(shost, NULL))
 		goto add_host_fail;
 
+	if (!try_module_get(iscsit->owner))
+		goto cls_session_fail;
+
 	cls_session = iscsi_create_session(shost, iscsit, 0);
 	if (!cls_session)
-		goto cls_session_fail;
+		goto module_put;
 	*(unsigned long*)shost->hostdata = (unsigned long)cls_session;
 
 	return cls_session;
 
+module_put:
+	module_put(iscsit->owner);
 cls_session_fail:
 	scsi_remove_host(shost);
 add_host_fail:
@@ -1325,6 +1330,7 @@ void iscsi_session_teardown(struct iscsi_cls_session *cls_session)
 
 	iscsi_destroy_session(cls_session);
 	scsi_host_put(shost);
+	module_put(cls_session->transport->owner);
 }
 EXPORT_SYMBOL_GPL(iscsi_session_teardown);
 
@@ -1697,6 +1703,185 @@ int iscsi_conn_bind(struct iscsi_cls_session *cls_session,
 }
 EXPORT_SYMBOL_GPL(iscsi_conn_bind);
 
+
+int iscsi_set_param(struct iscsi_cls_conn *cls_conn,
+		    enum iscsi_param param, char *buf, int buflen)
+{
+	struct iscsi_conn *conn = cls_conn->dd_data;
+	struct iscsi_session *session = conn->session;
+	uint32_t value;
+
+	switch(param) {
+	case ISCSI_PARAM_MAX_RECV_DLENGTH:
+		sscanf(buf, "%d", &conn->max_recv_dlength);
+		break;
+	case ISCSI_PARAM_MAX_XMIT_DLENGTH:
+		sscanf(buf, "%d", &conn->max_xmit_dlength);
+		break;
+	case ISCSI_PARAM_HDRDGST_EN:
+		sscanf(buf, "%d", &conn->hdrdgst_en);
+		break;
+	case ISCSI_PARAM_DATADGST_EN:
+		sscanf(buf, "%d", &conn->datadgst_en);
+		break;
+	case ISCSI_PARAM_INITIAL_R2T_EN:
+		sscanf(buf, "%d", &session->initial_r2t_en);
+		break;
+	case ISCSI_PARAM_MAX_R2T:
+		sscanf(buf, "%d", &session->max_r2t);
+		break;
+	case ISCSI_PARAM_IMM_DATA_EN:
+		sscanf(buf, "%d", &session->imm_data_en);
+		break;
+	case ISCSI_PARAM_FIRST_BURST:
+		sscanf(buf, "%d", &session->first_burst);
+		break;
+	case ISCSI_PARAM_MAX_BURST:
+		sscanf(buf, "%d", &session->max_burst);
+		break;
+	case ISCSI_PARAM_PDU_INORDER_EN:
+		sscanf(buf, "%d", &session->pdu_inorder_en);
+		break;
+	case ISCSI_PARAM_DATASEQ_INORDER_EN:
+		sscanf(buf, "%d", &session->dataseq_inorder_en);
+		break;
+	case ISCSI_PARAM_ERL:
+		sscanf(buf, "%d", &session->erl);
+		break;
+	case ISCSI_PARAM_IFMARKER_EN:
+		sscanf(buf, "%d", &value);
+		BUG_ON(value);
+		break;
+	case ISCSI_PARAM_OFMARKER_EN:
+		sscanf(buf, "%d", &value);
+		BUG_ON(value);
+		break;
+	case ISCSI_PARAM_EXP_STATSN:
+		sscanf(buf, "%u", &conn->exp_statsn);
+		break;
+	case ISCSI_PARAM_TARGET_NAME:
+		/* this should not change between logins */
+		if (session->targetname)
+			break;
+
+		session->targetname = kstrdup(buf, GFP_KERNEL);
+		if (!session->targetname)
+			return -ENOMEM;
+		break;
+	case ISCSI_PARAM_TPGT:
+		sscanf(buf, "%d", &session->tpgt);
+		break;
+	case ISCSI_PARAM_PERSISTENT_PORT:
+		sscanf(buf, "%d", &conn->persistent_port);
+		break;
+	case ISCSI_PARAM_PERSISTENT_ADDRESS:
+		/*
+		 * this is the address returned in discovery so it should
+		 * not change between logins.
+		 */
+		if (conn->persistent_address)
+			break;
+
+		conn->persistent_address = kstrdup(buf, GFP_KERNEL);
+		if (!conn->persistent_address)
+			return -ENOMEM;
+		break;
+	default:
+		return -ENOSYS;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(iscsi_set_param);
+
+int iscsi_session_get_param(struct iscsi_cls_session *cls_session,
+			    enum iscsi_param param, char *buf)
+{
+	struct Scsi_Host *shost = iscsi_session_to_shost(cls_session);
+	struct iscsi_session *session = iscsi_hostdata(shost->hostdata);
+	int len;
+
+	switch(param) {
+	case ISCSI_PARAM_INITIAL_R2T_EN:
+		len = sprintf(buf, "%d\n", session->initial_r2t_en);
+		break;
+	case ISCSI_PARAM_MAX_R2T:
+		len = sprintf(buf, "%hu\n", session->max_r2t);
+		break;
+	case ISCSI_PARAM_IMM_DATA_EN:
+		len = sprintf(buf, "%d\n", session->imm_data_en);
+		break;
+	case ISCSI_PARAM_FIRST_BURST:
+		len = sprintf(buf, "%u\n", session->first_burst);
+		break;
+	case ISCSI_PARAM_MAX_BURST:
+		len = sprintf(buf, "%u\n", session->max_burst);
+		break;
+	case ISCSI_PARAM_PDU_INORDER_EN:
+		len = sprintf(buf, "%d\n", session->pdu_inorder_en);
+		break;
+	case ISCSI_PARAM_DATASEQ_INORDER_EN:
+		len = sprintf(buf, "%d\n", session->dataseq_inorder_en);
+		break;
+	case ISCSI_PARAM_ERL:
+		len = sprintf(buf, "%d\n", session->erl);
+		break;
+	case ISCSI_PARAM_TARGET_NAME:
+		len = sprintf(buf, "%s\n", session->targetname);
+		break;
+	case ISCSI_PARAM_TPGT:
+		len = sprintf(buf, "%d\n", session->tpgt);
+		break;
+	default:
+		return -ENOSYS;
+	}
+
+	return len;
+}
+EXPORT_SYMBOL_GPL(iscsi_session_get_param);
+
+int iscsi_conn_get_param(struct iscsi_cls_conn *cls_conn,
+			 enum iscsi_param param, char *buf)
+{
+	struct iscsi_conn *conn = cls_conn->dd_data;
+	int len;
+
+	switch(param) {
+	case ISCSI_PARAM_MAX_RECV_DLENGTH:
+		len = sprintf(buf, "%u\n", conn->max_recv_dlength);
+		break;
+	case ISCSI_PARAM_MAX_XMIT_DLENGTH:
+		len = sprintf(buf, "%u\n", conn->max_xmit_dlength);
+		break;
+	case ISCSI_PARAM_HDRDGST_EN:
+		len = sprintf(buf, "%d\n", conn->hdrdgst_en);
+		break;
+	case ISCSI_PARAM_DATADGST_EN:
+		len = sprintf(buf, "%d\n", conn->datadgst_en);
+		break;
+	case ISCSI_PARAM_IFMARKER_EN:
+		len = sprintf(buf, "%d\n", conn->ifmarker_en);
+		break;
+	case ISCSI_PARAM_OFMARKER_EN:
+		len = sprintf(buf, "%d\n", conn->ofmarker_en);
+		break;
+	case ISCSI_PARAM_EXP_STATSN:
+		len = sprintf(buf, "%u\n", conn->exp_statsn);
+		break;
+	case ISCSI_PARAM_PERSISTENT_PORT:
+		len = sprintf(buf, "%d\n", conn->persistent_port);
+		break;
+	case ISCSI_PARAM_PERSISTENT_ADDRESS:
+		len = sprintf(buf, "%s\n", conn->persistent_address);
+		break;
+	default:
+		return -ENOSYS;
+	}
+
+	return len;
+}
+EXPORT_SYMBOL_GPL(iscsi_conn_get_param);
+
 MODULE_AUTHOR("Mike Christie");
 MODULE_DESCRIPTION("iSCSI library functions");
 MODULE_LICENSE("GPL");

drivers/scsi/lpfc/lpfc.h

@@ -174,7 +174,6 @@ struct lpfc_hba {
 	dma_addr_t slim2p_mapping;
 	uint16_t pci_cfg_value;
 
-	struct semaphore hba_can_block;
 	int32_t hba_state;
 
 #define LPFC_STATE_UNKNOWN        0    /* HBA state is unknown */

drivers/scsi/lpfc/lpfc_els.c

@@ -821,7 +821,7 @@ lpfc_issue_els_plogi(struct lpfc_hba * phba, uint32_t did, uint8_t retry)
 	pring = &psli->ring[LPFC_ELS_RING];	/* ELS ring */
 
 	cmdsize = (sizeof (uint32_t) + sizeof (struct serv_parm));
-	elsiocb = lpfc_prep_els_iocb(phba, 1, cmdsize, retry, 0, did,
+	elsiocb = lpfc_prep_els_iocb(phba, 1, cmdsize, retry, NULL, did,
 								ELS_CMD_PLOGI);
 	if (!elsiocb)
 		return 1;
@@ -2791,8 +2791,8 @@ lpfc_els_rsp_rps_acc(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
 
 	ndlp = (struct lpfc_nodelist *) pmb->context2;
 	xri = (uint16_t) ((unsigned long)(pmb->context1));
-	pmb->context1 = 0;
-	pmb->context2 = 0;
+	pmb->context1 = NULL;
+	pmb->context2 = NULL;
 
 	if (mb->mbxStatus) {
 		mempool_free( pmb, phba->mbox_mem_pool);

drivers/scsi/lpfc/lpfc_init.c

@@ -939,12 +939,12 @@ lpfc_get_hba_model_desc(struct lpfc_hba * phba, uint8_t * mdp, uint8_t * descp)
 					"10-port ", "PCIe"};
 			break;
 		default:
-			m = (typeof(m)){ 0 };
+			m = (typeof(m)){ NULL };
 			break;
 		}
 		break;
 	default:
-		m = (typeof(m)){ 0 };
+		m = (typeof(m)){ NULL };
 		break;
 	}
 
@@ -1451,7 +1451,6 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
 		goto out_put_host;
 
 	host->unique_id = phba->brd_no;
-	init_MUTEX(&phba->hba_can_block);
 	INIT_LIST_HEAD(&phba->ctrspbuflist);
 	INIT_LIST_HEAD(&phba->rnidrspbuflist);
 	INIT_LIST_HEAD(&phba->freebufList);

drivers/scsi/lpfc/lpfc_scsi.c

@@ -41,20 +41,6 @@
 #define LPFC_ABORT_WAIT  2
 
 
-static inline void
-lpfc_block_requests(struct lpfc_hba * phba)
-{
-	down(&phba->hba_can_block);
-	scsi_block_requests(phba->host);
-}
-
-static inline void
-lpfc_unblock_requests(struct lpfc_hba * phba)
-{
-	scsi_unblock_requests(phba->host);
-	up(&phba->hba_can_block);
-}
-
 /*
  * This routine allocates a scsi buffer, which contains all the necessary
  * information needed to initiate a SCSI I/O.  The non-DMAable buffer region
@@ -859,7 +845,6 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd)
 	unsigned int loop_count = 0;
 	int ret = SUCCESS;
 
-	lpfc_block_requests(phba);
 	spin_lock_irq(shost->host_lock);
 
 	lpfc_cmd = (struct lpfc_scsi_buf *)cmnd->host_scribble;
@@ -945,7 +930,6 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd)
 			cmnd->device->lun, cmnd->serial_number);
 
 	spin_unlock_irq(shost->host_lock);
-	lpfc_unblock_requests(phba);
 
 	return ret;
 }
@@ -963,7 +947,6 @@ lpfc_reset_lun_handler(struct scsi_cmnd *cmnd)
 	int ret = FAILED;
 	int cnt, loopcnt;
 
-	lpfc_block_requests(phba);
 	spin_lock_irq(shost->host_lock);
 	/*
 	 * If target is not in a MAPPED state, delay the reset until
@@ -1065,7 +1048,6 @@ out_free_scsi_buf:
 
 out:
 	spin_unlock_irq(shost->host_lock);
-	lpfc_unblock_requests(phba);
 	return ret;
 }
 
@@ -1080,7 +1062,6 @@ lpfc_reset_bus_handler(struct scsi_cmnd *cmnd)
 	int cnt, loopcnt;
 	struct lpfc_scsi_buf * lpfc_cmd;
 
-	lpfc_block_requests(phba);
 	spin_lock_irq(shost->host_lock);
 
 	lpfc_cmd = lpfc_get_scsi_buf(phba);
@@ -1163,7 +1144,6 @@ lpfc_reset_bus_handler(struct scsi_cmnd *cmnd)
 			phba->brd_no, ret);
 out:
 	spin_unlock_irq(shost->host_lock);
-	lpfc_unblock_requests(phba);
 	return ret;
 }
 

drivers/scsi/megaraid/megaraid_sas.c

@@ -10,7 +10,7 @@
  *	   2 of the License, or (at your option) any later version.
  *
  * FILE		: megaraid_sas.c
- * Version	: v00.00.02.04
+ * Version	: v00.00.03.01
  *
  * Authors:
  * 	Sreenivas Bagalkote	<Sreenivas.Bagalkote@lsil.com>
@@ -55,19 +55,25 @@ static struct pci_device_id megasas_pci_table[] = {
 
 	{
 	 PCI_VENDOR_ID_LSI_LOGIC,
-	 PCI_DEVICE_ID_LSI_SAS1064R, // xscale IOP
+	 PCI_DEVICE_ID_LSI_SAS1064R, /* xscale IOP */
 	 PCI_ANY_ID,
 	 PCI_ANY_ID,
 	 },
 	{
 	 PCI_VENDOR_ID_LSI_LOGIC,
-	 PCI_DEVICE_ID_LSI_SAS1078R, // ppc IOP
+	 PCI_DEVICE_ID_LSI_SAS1078R, /* ppc IOP */
 	 PCI_ANY_ID,
 	 PCI_ANY_ID,
 	},
+	{
+	 PCI_VENDOR_ID_LSI_LOGIC,
+	 PCI_DEVICE_ID_LSI_VERDE_ZCR,	/* xscale IOP, vega */
+	 PCI_ANY_ID,
+	 PCI_ANY_ID,
+	 },
 	{
 	 PCI_VENDOR_ID_DELL,
-	 PCI_DEVICE_ID_DELL_PERC5, // xscale IOP
+	 PCI_DEVICE_ID_DELL_PERC5, /* xscale IOP */
 	 PCI_ANY_ID,
 	 PCI_ANY_ID,
 	 },
@@ -289,9 +295,14 @@ static struct megasas_instance_template megasas_instance_template_ppc = {
  * @regs:			MFI register set
  */
 static inline void
-megasas_disable_intr(struct megasas_register_set __iomem * regs)
+megasas_disable_intr(struct megasas_instance *instance)
 {
 	u32 mask = 0x1f; 
+	struct megasas_register_set __iomem *regs = instance->reg_set;
+
+	if(instance->pdev->device == PCI_DEVICE_ID_LSI_SAS1078R)
+		mask = 0xffffffff;
+
 	writel(mask, &regs->outbound_intr_mask);
 
 	/* Dummy readl to force pci flush */
@@ -1260,7 +1271,7 @@ megasas_transition_to_ready(struct megasas_instance* instance)
 			/*
 			 * Bring it to READY state; assuming max wait 2 secs
 			 */
-			megasas_disable_intr(instance->reg_set);
+			megasas_disable_intr(instance);
 			writel(MFI_INIT_READY, &instance->reg_set->inbound_doorbell);
 
 			max_wait = 10;
@@ -1756,6 +1767,11 @@ static int megasas_init_mfi(struct megasas_instance *instance)
 
 	init_frame->data_xfer_len = sizeof(struct megasas_init_queue_info);
 
+	/*
+	 * disable the intr before firing the init frame to FW
+	 */
+	megasas_disable_intr(instance);
+
 	/*
 	 * Issue the init frame in polled mode
 	 */
@@ -2234,7 +2250,7 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	megasas_mgmt_info.max_index--;
 
 	pci_set_drvdata(pdev, NULL);
-	megasas_disable_intr(instance->reg_set);
+	megasas_disable_intr(instance);
 	free_irq(instance->pdev->irq, instance);
 
 	megasas_release_mfi(instance);
@@ -2364,7 +2380,7 @@ static void megasas_detach_one(struct pci_dev *pdev)
 
 	pci_set_drvdata(instance->pdev, NULL);
 
-	megasas_disable_intr(instance->reg_set);
+	megasas_disable_intr(instance);
 
 	free_irq(instance->pdev->irq, instance);
 

drivers/scsi/megaraid/megaraid_sas.h

@@ -18,9 +18,16 @@
 /**
  * MegaRAID SAS Driver meta data
  */
-#define MEGASAS_VERSION				"00.00.02.04"
-#define MEGASAS_RELDATE				"Feb 03, 2006"
-#define MEGASAS_EXT_VERSION			"Fri Feb 03 14:31:44 PST 2006"
+#define MEGASAS_VERSION				"00.00.03.01"
+#define MEGASAS_RELDATE				"May 14, 2006"
+#define MEGASAS_EXT_VERSION			"Sun May 14 22:49:52 PDT 2006"
+
+/*
+ * Device IDs
+ */
+#define	PCI_DEVICE_ID_LSI_SAS1078R		0x0060
+#define	PCI_DEVICE_ID_LSI_VERDE_ZCR		0x0413
+
 /*
  * =====================================
  * MegaRAID SAS MFI firmware definitions
@@ -554,7 +561,11 @@ struct megasas_ctrl_info {
 #define MFI_POLL_TIMEOUT_SECS			10
 
 #define MFI_REPLY_1078_MESSAGE_INTERRUPT	0x80000000
-#define PCI_DEVICE_ID_LSI_SAS1078R		0x00000060
+
+/*
+* register set for both 1068 and 1078 controllers
+* structure extended for 1078 registers
+*/
  
 struct megasas_register_set {
 	u32 	reserved_0[4];			/*0000h*/
@@ -1150,10 +1161,10 @@ struct compat_megasas_iocpacket {
 	struct compat_iovec sgl[MAX_IOCTL_SGE];
 } __attribute__ ((packed));
 
+#define MEGASAS_IOC_FIRMWARE32	_IOWR('M', 1, struct compat_megasas_iocpacket)
 #endif
 
 #define MEGASAS_IOC_FIRMWARE	_IOWR('M', 1, struct megasas_iocpacket)
-#define MEGASAS_IOC_FIRMWARE32	_IOWR('M', 1, struct compat_megasas_iocpacket)
 #define MEGASAS_IOC_GET_AEN	_IOW('M', 3, struct megasas_aen)
 
 struct megasas_mgmt_info {

drivers/scsi/nsp32.c

@@ -2866,8 +2866,7 @@ static int nsp32_detect(struct scsi_host_template *sht)
 	 */
 	nsp32_do_bus_reset(data);
 
-	ret = request_irq(host->irq, do_nsp32_isr,
-			  IRQF_SHARED | IRQF_SAMPLE_RANDOM, "nsp32", data);
+	ret = request_irq(host->irq, do_nsp32_isr, IRQF_SHARED, "nsp32", data);
 	if (ret < 0) {
 		nsp32_msg(KERN_ERR, "Unable to allocate IRQ for NinjaSCSI32 "
 			  "SCSI PCI controller. Interrupt: %d", host->irq);
@@ -2886,12 +2885,19 @@ static int nsp32_detect(struct scsi_host_template *sht)
         }
 
 #if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73))
-	scsi_add_host (host, &PCIDEV->dev);
+	ret = scsi_add_host(host, &PCIDEV->dev);
+	if (ret) {
+		nsp32_msg(KERN_ERR, "failed to add scsi host");
+		goto free_region;
+	}
 	scsi_scan_host(host);
 #endif
 	pci_set_drvdata(PCIDEV, host);
 	return DETECT_OK;
 
+ free_region:
+	release_region(host->io_port, host->n_io_port);
+
  free_irq:
 	free_irq(host->irq, data);
 

drivers/scsi/pcmcia/nsp_cs.c

@@ -1623,7 +1623,7 @@ static int nsp_cs_probe(struct pcmcia_device *link)
 	/* Interrupt handler */
 	link->irq.Handler	 = &nspintr;
 	link->irq.Instance       = info;
-	link->irq.Attributes     |= (IRQF_SHARED | IRQF_SAMPLE_RANDOM);
+	link->irq.Attributes     |= IRQF_SHARED;
 
 	/* General socket configuration */
 	link->conf.Attributes	 = CONF_ENABLE_IRQ;

drivers/scsi/qla1280.c

@@ -4209,7 +4209,7 @@ qla1280_setup(char *s)
 }
 
 
-static int
+static int __init
 qla1280_get_token(char *str)
 {
 	char *sep;

drivers/scsi/qla2xxx/qla_attr.c

@@ -16,15 +16,16 @@ qla2x00_sysfs_read_fw_dump(struct kobject *kobj, char *buf, loff_t off,
 {
 	struct scsi_qla_host *ha = to_qla_host(dev_to_shost(container_of(kobj,
 	    struct device, kobj)));
+	char *rbuf = (char *)ha->fw_dump;
 
 	if (ha->fw_dump_reading == 0)
 		return 0;
-	if (off > ha->fw_dump_buffer_len)
-		return 0;
-	if (off + count > ha->fw_dump_buffer_len)
-		count = ha->fw_dump_buffer_len - off;
+	if (off > ha->fw_dump_len)
+                return 0;
+	if (off + count > ha->fw_dump_len)
+		count = ha->fw_dump_len - off;
 
-	memcpy(buf, &ha->fw_dump_buffer[off], count);
+	memcpy(buf, &rbuf[off], count);
 
 	return (count);
 }
@@ -36,7 +37,6 @@ qla2x00_sysfs_write_fw_dump(struct kobject *kobj, char *buf, loff_t off,
 	struct scsi_qla_host *ha = to_qla_host(dev_to_shost(container_of(kobj,
 	    struct device, kobj)));
 	int reading;
-	uint32_t dump_size;
 
 	if (off != 0)
 		return (0);
@@ -44,46 +44,27 @@ qla2x00_sysfs_write_fw_dump(struct kobject *kobj, char *buf, loff_t off,
 	reading = simple_strtol(buf, NULL, 10);
 	switch (reading) {
 	case 0:
-		if (ha->fw_dump_reading == 1) {
-			qla_printk(KERN_INFO, ha,
-			    "Firmware dump cleared on (%ld).\n", ha->host_no);
+		if (!ha->fw_dump_reading)
+			break;
 
-			vfree(ha->fw_dump_buffer);
-			ha->fw_dump_buffer = NULL;
-			ha->fw_dump_reading = 0;
-			ha->fw_dumped = 0;
-		}
+		qla_printk(KERN_INFO, ha,
+		    "Firmware dump cleared on (%ld).\n", ha->host_no);
+
+		ha->fw_dump_reading = 0;
+		ha->fw_dumped = 0;
 		break;
 	case 1:
 		if (ha->fw_dumped && !ha->fw_dump_reading) {
 			ha->fw_dump_reading = 1;
 
-			if (IS_QLA24XX(ha) || IS_QLA54XX(ha))
-				dump_size = FW_DUMP_SIZE_24XX;
-			else {
-				dump_size = FW_DUMP_SIZE_1M;
-				if (ha->fw_memory_size < 0x20000)
-					dump_size = FW_DUMP_SIZE_128K;
-				else if (ha->fw_memory_size < 0x80000)
-					dump_size = FW_DUMP_SIZE_512K;
-			}
-			ha->fw_dump_buffer = (char *)vmalloc(dump_size);
-			if (ha->fw_dump_buffer == NULL) {
-				qla_printk(KERN_WARNING, ha,
-				    "Unable to allocate memory for firmware "
-				    "dump buffer (%d).\n", dump_size);
-
-				ha->fw_dump_reading = 0;
-				return (count);
-			}
 			qla_printk(KERN_INFO, ha,
-			    "Firmware dump ready for read on (%ld).\n",
+			    "Raw firmware dump ready for read on (%ld).\n",
 			    ha->host_no);
-			memset(ha->fw_dump_buffer, 0, dump_size);
-			ha->isp_ops.ascii_fw_dump(ha);
-			ha->fw_dump_buffer_len = strlen(ha->fw_dump_buffer);
 		}
 		break;
+	case 2:
+		qla2x00_alloc_fw_dump(ha);
+		break;
 	}
 	return (count);
 }
@@ -313,9 +294,6 @@ qla2x00_sysfs_read_vpd(struct kobject *kobj, char *buf, loff_t off,
 	if (!capable(CAP_SYS_ADMIN) || off != 0)
 		return 0;
 
-	if (!IS_QLA24XX(ha) && !IS_QLA54XX(ha))
-		return -ENOTSUPP;
-
 	/* Read NVRAM. */
 	spin_lock_irqsave(&ha->hardware_lock, flags);
 	ha->isp_ops.read_nvram(ha, (uint8_t *)buf, ha->vpd_base, ha->vpd_size);
@@ -335,9 +313,6 @@ qla2x00_sysfs_write_vpd(struct kobject *kobj, char *buf, loff_t off,
 	if (!capable(CAP_SYS_ADMIN) || off != 0 || count != ha->vpd_size)
 		return 0;
 
-	if (!IS_QLA24XX(ha) && !IS_QLA54XX(ha))
-		return -ENOTSUPP;
-
 	/* Write NVRAM. */
 	spin_lock_irqsave(&ha->hardware_lock, flags);
 	ha->isp_ops.write_nvram(ha, (uint8_t *)buf, ha->vpd_base, count);
@@ -357,6 +332,53 @@ static struct bin_attribute sysfs_vpd_attr = {
 	.write = qla2x00_sysfs_write_vpd,
 };
 
+static ssize_t
+qla2x00_sysfs_read_sfp(struct kobject *kobj, char *buf, loff_t off,
+    size_t count)
+{
+	struct scsi_qla_host *ha = to_qla_host(dev_to_shost(container_of(kobj,
+	    struct device, kobj)));
+	uint16_t iter, addr, offset;
+	int rval;
+
+	if (!capable(CAP_SYS_ADMIN) || off != 0 || count != SFP_DEV_SIZE * 2)
+		return 0;
+
+	addr = 0xa0;
+	for (iter = 0, offset = 0; iter < (SFP_DEV_SIZE * 2) / SFP_BLOCK_SIZE;
+	    iter++, offset += SFP_BLOCK_SIZE) {
+		if (iter == 4) {
+			/* Skip to next device address. */
+			addr = 0xa2;
+			offset = 0;
+		}
+
+		rval = qla2x00_read_sfp(ha, ha->sfp_data_dma, addr, offset,
+		    SFP_BLOCK_SIZE);
+		if (rval != QLA_SUCCESS) {
+			qla_printk(KERN_WARNING, ha,
+			    "Unable to read SFP data (%x/%x/%x).\n", rval,
+			    addr, offset);
+			count = 0;
+			break;
+		}
+		memcpy(buf, ha->sfp_data, SFP_BLOCK_SIZE);
+		buf += SFP_BLOCK_SIZE;
+	}
+
+	return count;
+}
+
+static struct bin_attribute sysfs_sfp_attr = {
+	.attr = {
+		.name = "sfp",
+		.mode = S_IRUSR | S_IWUSR,
+		.owner = THIS_MODULE,
+	},
+	.size = SFP_DEV_SIZE * 2,
+	.read = qla2x00_sysfs_read_sfp,
+};
+
 void
 qla2x00_alloc_sysfs_attr(scsi_qla_host_t *ha)
 {
@@ -367,7 +389,12 @@ qla2x00_alloc_sysfs_attr(scsi_qla_host_t *ha)
 	sysfs_create_bin_file(&host->shost_gendev.kobj, &sysfs_optrom_attr);
 	sysfs_create_bin_file(&host->shost_gendev.kobj,
 	    &sysfs_optrom_ctl_attr);
-	sysfs_create_bin_file(&host->shost_gendev.kobj, &sysfs_vpd_attr);
+	if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) {
+		sysfs_create_bin_file(&host->shost_gendev.kobj,
+		    &sysfs_vpd_attr);
+		sysfs_create_bin_file(&host->shost_gendev.kobj,
+		    &sysfs_sfp_attr);
+	}
 }
 
 void
@@ -380,7 +407,12 @@ qla2x00_free_sysfs_attr(scsi_qla_host_t *ha)
 	sysfs_remove_bin_file(&host->shost_gendev.kobj, &sysfs_optrom_attr);
 	sysfs_remove_bin_file(&host->shost_gendev.kobj,
 	    &sysfs_optrom_ctl_attr);
-	sysfs_remove_bin_file(&host->shost_gendev.kobj, &sysfs_vpd_attr);
+	if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) {
+		sysfs_remove_bin_file(&host->shost_gendev.kobj,
+		    &sysfs_vpd_attr);
+		sysfs_remove_bin_file(&host->shost_gendev.kobj,
+		    &sysfs_sfp_attr);
+	}
 
 	if (ha->beacon_blink_led == 1)
 		ha->isp_ops.beacon_off(ha);

drivers/scsi/qla2xxx/qla_dbg.h

@@ -37,134 +37,86 @@
 /*
 * Macros use for debugging the driver.
 */
-#undef ENTER_TRACE
-#if defined(ENTER_TRACE)
-#define ENTER(x)	do { printk("qla2100 : Entering %s()\n", x); } while (0)
-#define LEAVE(x)	do { printk("qla2100 : Leaving %s()\n", x);  } while (0)
-#define ENTER_INTR(x)	do { printk("qla2100 : Entering %s()\n", x); } while (0)
-#define LEAVE_INTR(x)	do { printk("qla2100 : Leaving %s()\n", x);  } while (0)
-#else
-#define ENTER(x)	do {} while (0)
-#define LEAVE(x)	do {} while (0)
-#define ENTER_INTR(x) 	do {} while (0)
-#define LEAVE_INTR(x)   do {} while (0)
-#endif
 
-#if  DEBUG_QLA2100
-#define DEBUG(x)	do {x;} while (0);
-#else
-#define DEBUG(x)	do {} while (0);
-#endif
+#define DEBUG(x)	do { if (extended_error_logging) { x; } } while (0)
 
 #if defined(QL_DEBUG_LEVEL_1)
-#define DEBUG1(x)	do {x;} while (0);
+#define DEBUG1(x)	do {x;} while (0)
 #else
-#define DEBUG1(x)	do {} while (0);
+#define DEBUG1(x)	do {} while (0)
 #endif
 
-#if defined(QL_DEBUG_LEVEL_2)
-#define DEBUG2(x)       do {x;} while (0);
-#define DEBUG2_3(x)     do {x;} while (0);
-#define DEBUG2_3_11(x)  do {x;} while (0);
-#define DEBUG2_9_10(x)    do {x;} while (0);
-#define DEBUG2_11(x)    do {x;} while (0);
-#define DEBUG2_13(x)    do {x;} while (0);
-#else
-#define DEBUG2(x)	do {} while (0);
-#endif
+#define DEBUG2(x)	do { if (extended_error_logging) { x; } } while (0)
+#define DEBUG2_3(x)	do { if (extended_error_logging) { x; } } while (0)
+#define DEBUG2_3_11(x)	do { if (extended_error_logging) { x; } } while (0)
+#define DEBUG2_9_10(x)	do { if (extended_error_logging) { x; } } while (0)
+#define DEBUG2_11(x)	do { if (extended_error_logging) { x; } } while (0)
+#define DEBUG2_13(x)	do { if (extended_error_logging) { x; } } while (0)
 
 #if defined(QL_DEBUG_LEVEL_3)
-#define DEBUG3(x)	do {x;} while (0);
-#define DEBUG2_3(x)	do {x;} while (0);
-#define DEBUG2_3_11(x)	do {x;} while (0);
-#define DEBUG3_11(x)	do {x;} while (0);
+#define DEBUG3(x)	do {x;} while (0)
+#define DEBUG3_11(x)	do {x;} while (0)
 #else
-#define DEBUG3(x)	do {} while (0);
-  #if !defined(QL_DEBUG_LEVEL_2)
-  #define DEBUG2_3(x)	do {} while (0);
-  #endif
+#define DEBUG3(x)	do {} while (0)
 #endif
 
 #if defined(QL_DEBUG_LEVEL_4)
-#define DEBUG4(x)	do {x;} while (0);
+#define DEBUG4(x)	do {x;} while (0)
 #else
-#define DEBUG4(x)	do {} while (0);
+#define DEBUG4(x)	do {} while (0)
 #endif
 
 #if defined(QL_DEBUG_LEVEL_5)
-#define DEBUG5(x)          do {x;} while (0);
+#define DEBUG5(x)          do {x;} while (0)
 #else
-#define DEBUG5(x)	do {} while (0);
+#define DEBUG5(x)	do {} while (0)
 #endif
 
 #if defined(QL_DEBUG_LEVEL_7)
-#define DEBUG7(x)          do {x;} while (0);
+#define DEBUG7(x)          do {x;} while (0)
 #else
-#define DEBUG7(x)	   do {} while (0);
+#define DEBUG7(x)	   do {} while (0)
 #endif
 
 #if defined(QL_DEBUG_LEVEL_9)
-#define DEBUG9(x)       do {x;} while (0);
-#define DEBUG9_10(x)    do {x;} while (0);
-#define DEBUG2_9_10(x)	do {x;} while (0);
+#define DEBUG9(x)       do {x;} while (0)
+#define DEBUG9_10(x)    do {x;} while (0)
 #else
-#define DEBUG9(x)	do {} while (0);
+#define DEBUG9(x)	do {} while (0)
 #endif
 
 #if defined(QL_DEBUG_LEVEL_10)
-#define DEBUG10(x)      do {x;} while (0);
-#define DEBUG2_9_10(x)	do {x;} while (0);
-#define DEBUG9_10(x)	do {x;} while (0);
+#define DEBUG10(x)      do {x;} while (0)
+#define DEBUG9_10(x)	do {x;} while (0)
 #else
-#define DEBUG10(x)	do {} while (0);
-  #if !defined(DEBUG2_9_10)
-  #define DEBUG2_9_10(x)	do {} while (0);
-  #endif
+#define DEBUG10(x)	do {} while (0)
   #if !defined(DEBUG9_10)
-  #define DEBUG9_10(x)	do {} while (0);
+  #define DEBUG9_10(x)	do {} while (0)
   #endif
 #endif
 
 #if defined(QL_DEBUG_LEVEL_11)
-#define DEBUG11(x)      do{x;} while(0);
-#if !defined(DEBUG2_11)
-#define DEBUG2_11(x)    do{x;} while(0);
-#endif
-#if !defined(DEBUG2_3_11)
-#define DEBUG2_3_11(x)  do{x;} while(0);
-#endif
+#define DEBUG11(x)      do{x;} while(0)
 #if !defined(DEBUG3_11)
-#define DEBUG3_11(x)    do{x;} while(0);
+#define DEBUG3_11(x)    do{x;} while(0)
 #endif
 #else
-#define DEBUG11(x)	do{} while(0);
-  #if !defined(QL_DEBUG_LEVEL_2)
-  #define DEBUG2_11(x)	do{} while(0);
-    #if !defined(QL_DEBUG_LEVEL_3)
-    #define DEBUG2_3_11(x) do{} while(0);
-    #endif
-  #endif
+#define DEBUG11(x)	do{} while(0)
   #if !defined(QL_DEBUG_LEVEL_3)
-  #define DEBUG3_11(x)	do{} while(0);
+  #define DEBUG3_11(x)	do{} while(0)
   #endif
 #endif
 
 #if defined(QL_DEBUG_LEVEL_12)
-#define DEBUG12(x)      do {x;} while (0);
+#define DEBUG12(x)      do {x;} while (0)
 #else
-#define DEBUG12(x)	do {} while (0);
+#define DEBUG12(x)	do {} while (0)
 #endif
 
 #if defined(QL_DEBUG_LEVEL_13)
 #define DEBUG13(x)      do {x;} while (0)
-#if !defined(DEBUG2_13)
-#define DEBUG2_13(x)    do {x;} while(0)
-#endif
 #else
 #define DEBUG13(x)	do {} while (0)
-#if !defined(QL_DEBUG_LEVEL_2)
-#define DEBUG2_13(x)	do {} while(0)
-#endif
 #endif
 
 #if defined(QL_DEBUG_LEVEL_14)
@@ -176,9 +128,6 @@
 /*
  * Firmware Dump structure definition
  */
-#define FW_DUMP_SIZE_128K	0xBC000
-#define FW_DUMP_SIZE_512K	0x2FC000
-#define FW_DUMP_SIZE_1M		0x5FC000
 
 struct qla2300_fw_dump {
 	uint16_t hccr;
@@ -224,8 +173,6 @@ struct qla2100_fw_dump {
 	uint16_t risc_ram[0xf000];
 };
 
-#define FW_DUMP_SIZE_24XX	0x2B0000
-
 struct qla24xx_fw_dump {
 	uint32_t host_status;
 	uint32_t host_reg[32];
@@ -257,3 +204,39 @@ struct qla24xx_fw_dump {
 	uint32_t code_ram[0x2000];
 	uint32_t ext_mem[1];
 };
+
+#define EFT_NUM_BUFFERS		4
+#define EFT_BYTES_PER_BUFFER	0x4000
+#define EFT_SIZE		((EFT_BYTES_PER_BUFFER) * (EFT_NUM_BUFFERS))
+
+struct qla2xxx_fw_dump {
+	uint8_t signature[4];
+	uint32_t version;
+
+	uint32_t fw_major_version;
+	uint32_t fw_minor_version;
+	uint32_t fw_subminor_version;
+	uint32_t fw_attributes;
+
+	uint32_t vendor;
+	uint32_t device;
+	uint32_t subsystem_vendor;
+	uint32_t subsystem_device;
+
+	uint32_t fixed_size;
+	uint32_t mem_size;
+	uint32_t req_q_size;
+	uint32_t rsp_q_size;
+
+	uint32_t eft_size;
+	uint32_t eft_addr_l;
+	uint32_t eft_addr_h;
+
+	uint32_t header_size;
+
+	union {
+		struct qla2100_fw_dump isp21;
+		struct qla2300_fw_dump isp23;
+		struct qla24xx_fw_dump isp24;
+	} isp;
+};

drivers/scsi/qla2xxx/qla_def.h

@@ -608,7 +608,9 @@ typedef struct {
 #define MBC_SERDES_PARAMS		0x10	/* Serdes Tx Parameters. */
 #define MBC_GET_IOCB_STATUS		0x12	/* Get IOCB status command. */
 #define MBC_GET_TIMEOUT_PARAMS		0x22	/* Get FW timeouts. */
+#define MBC_TRACE_CONTROL		0x27	/* Trace control command. */
 #define MBC_GEN_SYSTEM_ERROR		0x2a	/* Generate System Error. */
+#define MBC_READ_SFP			0x31	/* Read SFP Data. */
 #define MBC_SET_TIMEOUT_PARAMS		0x32	/* Set FW timeouts. */
 #define MBC_MID_INITIALIZE_FIRMWARE	0x48	/* MID Initialize firmware. */
 #define MBC_MID_GET_VP_DATABASE		0x49	/* MID Get VP Database. */
@@ -618,6 +620,9 @@ typedef struct {
 #define MBC_GET_LINK_PRIV_STATS		0x6d	/* Get link & private data. */
 #define MBC_SET_VENDOR_ID		0x76	/* Set Vendor ID. */
 
+#define TC_ENABLE			4
+#define TC_DISABLE			5
+
 /* Firmware return data sizes */
 #define FCAL_MAP_SIZE	128
 
@@ -1997,7 +2002,6 @@ struct isp_operations {
 		uint32_t);
 
 	void (*fw_dump) (struct scsi_qla_host *, int);
-	void (*ascii_fw_dump) (struct scsi_qla_host *);
 
 	int (*beacon_on) (struct scsi_qla_host *);
 	int (*beacon_off) (struct scsi_qla_host *);
@@ -2041,6 +2045,7 @@ typedef struct scsi_qla_host {
 		uint32_t	enable_led_scheme	:1;
 		uint32_t	msi_enabled		:1;
 		uint32_t	msix_enabled		:1;
+		uint32_t	disable_serdes		:1;
 	} flags;
 
 	atomic_t	loop_state;
@@ -2238,6 +2243,11 @@ typedef struct scsi_qla_host {
 	struct sns_cmd_pkt	*sns_cmd;
 	dma_addr_t		sns_cmd_dma;
 
+#define SFP_DEV_SIZE	256
+#define SFP_BLOCK_SIZE	64
+	void			*sfp_data;
+	dma_addr_t		sfp_data_dma;
+
 	struct task_struct	*dpc_thread;
 	uint8_t dpc_active;                  /* DPC routine is active */
 
@@ -2303,11 +2313,12 @@ typedef struct scsi_qla_host {
 	uint16_t	fw_seriallink_options24[4];
 
 	/* Firmware dump information. */
-	void		*fw_dump;
+	struct qla2xxx_fw_dump *fw_dump;
+	uint32_t	fw_dump_len;
 	int		fw_dumped;
 	int		fw_dump_reading;
-	char		*fw_dump_buffer;
-	int		fw_dump_buffer_len;
+	dma_addr_t	eft_dma;
+	void		*eft;
 
 	uint8_t		host_str[16];
 	uint32_t	pci_attr;

drivers/scsi/qla2xxx/qla_devtbl.h

@@ -1,4 +1,4 @@
-#define QLA_MODEL_NAMES         0x4A
+#define QLA_MODEL_NAMES		0x57
 
 /*
  * Adapter model names and descriptions.
@@ -76,6 +76,19 @@ static char *qla2x00_model_name[QLA_MODEL_NAMES*2] = {
 	"QLE2440",	"PCI-Express to 4Gb FC, Single Channel",	/* 0x145 */
 	"QLE2464",	"PCI-Express to 4Gb FC, Quad Channel",		/* 0x146 */
 	"QLA2440",	"PCI-X 2.0 to 4Gb FC, Single Channel",		/* 0x147 */
-	" ",		" ",						/* 0x148 */
+	"HP AE369A",	"PCI-X 2.0 to 4Gb FC, Dual Channel",		/* 0x148 */
 	"QLA2340",	"Sun 133MHz PCI-X to 2Gb FC, Single Channel",	/* 0x149 */
+	" ",		" ",						/* 0x14a */
+	" ",		" ",						/* 0x14b */
+	"QMC2432M",	"IBM eServer BC 4Gb FC Expansion Card CFFE",	/* 0x14c */
+	"QMC2422M",	"IBM eServer BC 4Gb FC Expansion Card CFFX",	/* 0x14d */
+	"QLE220",	"Sun PCI-Express to 4Gb FC, Single Channel",	/* 0x14e */
+	" ",		" ",						/* 0x14f */
+	" ",		" ",						/* 0x150 */
+	" ",		" ",						/* 0x151 */
+	"QME2462",	"PCI-Express to 4Gb FC, Dual Channel Mezz HBA",	/* 0x152 */
+	"QMH2462",	"PCI-Express to 4Gb FC, Dual Channel Mezz HBA",	/* 0x153 */
+	" ",		" ",						/* 0x154 */
+	"QLE220",	"PCI-Express to 4Gb FC, Single Channel",	/* 0x155 */
+	"QLE220",	"PCI-Express to 4Gb FC, Single Channel",	/* 0x156 */
 };

drivers/scsi/qla2xxx/qla_fw.h

@@ -141,7 +141,7 @@ struct nvram_24xx {
 	 * BIT 2  = Enable Memory Map BIOS
 	 * BIT 3  = Enable Selectable Boot
 	 * BIT 4  = Disable RISC code load
-	 * BIT 5  =
+	 * BIT 5  = Disable Serdes
 	 * BIT 6  =
 	 * BIT 7  =
 	 *
@@ -278,7 +278,7 @@ struct init_cb_24xx {
 	uint16_t response_q_length;
 	uint16_t request_q_length;
 
-	uint16_t link_down_timeout;		/* Milliseconds. */
+	uint16_t link_down_on_nos;		/* Milliseconds. */
 
 	uint16_t prio_request_q_length;
 

drivers/scsi/qla2xxx/qla_gbl.h

@@ -31,13 +31,9 @@ extern void qla2x00_update_fw_options(struct scsi_qla_host *);
 extern void qla24xx_update_fw_options(scsi_qla_host_t *);
 extern int qla2x00_load_risc(struct scsi_qla_host *, uint32_t *);
 extern int qla24xx_load_risc(scsi_qla_host_t *, uint32_t *);
-extern int qla24xx_load_risc_flash(scsi_qla_host_t *, uint32_t *);
-
-extern fc_port_t *qla2x00_alloc_fcport(scsi_qla_host_t *, gfp_t);
 
 extern int qla2x00_loop_resync(scsi_qla_host_t *);
 
-extern int qla2x00_find_new_loop_id(scsi_qla_host_t *, fc_port_t *);
 extern int qla2x00_fabric_login(scsi_qla_host_t *, fc_port_t *, uint16_t *);
 extern int qla2x00_local_device_login(scsi_qla_host_t *, fc_port_t *);
 
@@ -51,6 +47,8 @@ extern int qla2x00_abort_isp(scsi_qla_host_t *);
 extern void qla2x00_update_fcport(scsi_qla_host_t *, fc_port_t *);
 extern void qla2x00_reg_remote_port(scsi_qla_host_t *, fc_port_t *);
 
+extern void qla2x00_alloc_fw_dump(scsi_qla_host_t *);
+
 /*
  * Global Data in qla_os.c source file.
  */
@@ -61,6 +59,8 @@ extern int qlport_down_retry;
 extern int ql2xplogiabsentdevice;
 extern int ql2xloginretrycount;
 extern int ql2xfdmienable;
+extern int ql2xallocfwdump;
+extern int extended_error_logging;
 
 extern void qla2x00_sp_compl(scsi_qla_host_t *, srb_t *);
 
@@ -80,8 +80,6 @@ extern void qla2xxx_wake_dpc(scsi_qla_host_t *);
 /*
  * Global Function Prototypes in qla_iocb.c source file.
  */
-extern void qla2x00_isp_cmd(scsi_qla_host_t *);
-
 extern uint16_t qla2x00_calc_iocbs_32(uint16_t);
 extern uint16_t qla2x00_calc_iocbs_64(uint16_t);
 extern void qla2x00_build_scsi_iocbs_32(srb_t *, cmd_entry_t *, uint16_t);
@@ -204,6 +202,12 @@ qla2x00_set_serdes_params(scsi_qla_host_t *, uint16_t, uint16_t, uint16_t);
 extern int
 qla2x00_stop_firmware(scsi_qla_host_t *);
 
+extern int
+qla2x00_trace_control(scsi_qla_host_t *, uint16_t, dma_addr_t, uint16_t);
+
+extern int
+qla2x00_read_sfp(scsi_qla_host_t *, dma_addr_t, uint16_t, uint16_t, uint16_t);
+
 /*
  * Global Function Prototypes in qla_isr.c source file.
  */
@@ -254,9 +258,6 @@ extern int qla24xx_write_optrom_data(struct scsi_qla_host *, uint8_t *,
 extern void qla2100_fw_dump(scsi_qla_host_t *, int);
 extern void qla2300_fw_dump(scsi_qla_host_t *, int);
 extern void qla24xx_fw_dump(scsi_qla_host_t *, int);
-extern void qla2100_ascii_fw_dump(scsi_qla_host_t *);
-extern void qla2300_ascii_fw_dump(scsi_qla_host_t *);
-extern void qla24xx_ascii_fw_dump(scsi_qla_host_t *);
 extern void qla2x00_dump_regs(scsi_qla_host_t *);
 extern void qla2x00_dump_buffer(uint8_t *, uint32_t);
 extern void qla2x00_print_scsi_cmd(struct scsi_cmnd *);
@@ -279,13 +280,6 @@ extern void *qla2x00_prep_ms_fdmi_iocb(scsi_qla_host_t *, uint32_t, uint32_t);
 extern void *qla24xx_prep_ms_fdmi_iocb(scsi_qla_host_t *, uint32_t, uint32_t);
 extern int qla2x00_fdmi_register(scsi_qla_host_t *);
 
-/*
- * Global Function Prototypes in qla_xioctl.c source file.
- */
-#define qla2x00_enqueue_aen(ha, cmd, mode)	do { } while (0)
-#define qla2x00_alloc_ioctl_mem(ha)		(0)
-#define qla2x00_free_ioctl_mem(ha)		do { } while (0)
-
 /*
  * Global Function Prototypes in qla_attr.c source file.
  */

drivers/scsi/qla2xxx/qla_init.c

@@ -39,6 +39,8 @@ static int qla2x00_fabric_dev_login(scsi_qla_host_t *, fc_port_t *,
 
 static int qla2x00_restart_isp(scsi_qla_host_t *);
 
+static int qla2x00_find_new_loop_id(scsi_qla_host_t *ha, fc_port_t *dev);
+
 /****************************************************************************/
 /*                QLogic ISP2x00 Hardware Support Functions.                */
 /****************************************************************************/
@@ -89,6 +91,17 @@ qla2x00_initialize_adapter(scsi_qla_host_t *ha)
 
 	ha->isp_ops.nvram_config(ha);
 
+	if (ha->flags.disable_serdes) {
+		/* Mask HBA via NVRAM settings? */
+		qla_printk(KERN_INFO, ha, "Masking HBA WWPN "
+		    "%02x%02x%02x%02x%02x%02x%02x%02x (via NVRAM).\n",
+		    ha->port_name[0], ha->port_name[1],
+		    ha->port_name[2], ha->port_name[3],
+		    ha->port_name[4], ha->port_name[5],
+		    ha->port_name[6], ha->port_name[7]);
+		return QLA_FUNCTION_FAILED;
+	}
+
 	qla_printk(KERN_INFO, ha, "Verifying loaded RISC code...\n");
 
 	retry = 10;
@@ -770,29 +783,104 @@ qla24xx_chip_diag(scsi_qla_host_t *ha)
 	return rval;
 }
 
-static void
+void
 qla2x00_alloc_fw_dump(scsi_qla_host_t *ha)
 {
-	uint32_t dump_size = 0;
+	int rval;
+	uint32_t dump_size, fixed_size, mem_size, req_q_size, rsp_q_size,
+	    eft_size;
+	dma_addr_t eft_dma;
+	void *eft;
+
+	if (ha->fw_dump) {
+		qla_printk(KERN_WARNING, ha,
+		    "Firmware dump previously allocated.\n");
+		return;
+	}
 
 	ha->fw_dumped = 0;
+	fixed_size = mem_size = eft_size = 0;
 	if (IS_QLA2100(ha) || IS_QLA2200(ha)) {
-		dump_size = sizeof(struct qla2100_fw_dump);
+		fixed_size = sizeof(struct qla2100_fw_dump);
 	} else if (IS_QLA23XX(ha)) {
-		dump_size = sizeof(struct qla2300_fw_dump);
-		dump_size += (ha->fw_memory_size - 0x11000) * sizeof(uint16_t);
-        } else if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) {
-		dump_size = sizeof(struct qla24xx_fw_dump);
-		dump_size += (ha->fw_memory_size - 0x100000) * sizeof(uint32_t);
+		fixed_size = offsetof(struct qla2300_fw_dump, data_ram);
+		mem_size = (ha->fw_memory_size - 0x11000 + 1) *
+		    sizeof(uint16_t);
+	} else if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) {
+		fixed_size = offsetof(struct qla24xx_fw_dump, ext_mem);
+		mem_size = (ha->fw_memory_size - 0x100000 + 1) *
+		    sizeof(uint32_t);
+
+		/* Allocate memory for Extended Trace Buffer. */
+		eft = dma_alloc_coherent(&ha->pdev->dev, EFT_SIZE, &eft_dma,
+		    GFP_KERNEL);
+		if (!eft) {
+			qla_printk(KERN_WARNING, ha, "Unable to allocate "
+			    "(%d KB) for EFT.\n", EFT_SIZE / 1024);
+			goto cont_alloc;
+		}
+
+		rval = qla2x00_trace_control(ha, TC_ENABLE, eft_dma,
+		    EFT_NUM_BUFFERS);
+		if (rval) {
+			qla_printk(KERN_WARNING, ha, "Unable to initialize "
+			    "EFT (%d).\n", rval);
+			dma_free_coherent(&ha->pdev->dev, EFT_SIZE, eft,
+			    eft_dma);
+			goto cont_alloc;
+		}
+
+		qla_printk(KERN_INFO, ha, "Allocated (%d KB) for EFT...\n",
+		    EFT_SIZE / 1024);
+
+		eft_size = EFT_SIZE;
+		memset(eft, 0, eft_size);
+		ha->eft_dma = eft_dma;
+		ha->eft = eft;
 	}
+cont_alloc:
+	req_q_size = ha->request_q_length * sizeof(request_t);
+	rsp_q_size = ha->response_q_length * sizeof(response_t);
+
+	dump_size = offsetof(struct qla2xxx_fw_dump, isp);
+	dump_size += fixed_size + mem_size + req_q_size + rsp_q_size +
+	    eft_size;
 
 	ha->fw_dump = vmalloc(dump_size);
-	if (ha->fw_dump)
-		qla_printk(KERN_INFO, ha, "Allocated (%d KB) for firmware "
-		    "dump...\n", dump_size / 1024);
-	else
+	if (!ha->fw_dump) {
 		qla_printk(KERN_WARNING, ha, "Unable to allocate (%d KB) for "
 		    "firmware dump!!!\n", dump_size / 1024);
+
+		if (ha->eft) {
+			dma_free_coherent(&ha->pdev->dev, eft_size, ha->eft,
+			    ha->eft_dma);
+			ha->eft = NULL;
+			ha->eft_dma = 0;
+		}
+		return;
+	}
+
+	qla_printk(KERN_INFO, ha, "Allocated (%d KB) for firmware dump...\n",
+	    dump_size / 1024);
+
+	ha->fw_dump_len = dump_size;
+	ha->fw_dump->signature[0] = 'Q';
+	ha->fw_dump->signature[1] = 'L';
+	ha->fw_dump->signature[2] = 'G';
+	ha->fw_dump->signature[3] = 'C';
+	ha->fw_dump->version = __constant_htonl(1);
+
+	ha->fw_dump->fixed_size = htonl(fixed_size);
+	ha->fw_dump->mem_size = htonl(mem_size);
+	ha->fw_dump->req_q_size = htonl(req_q_size);
+	ha->fw_dump->rsp_q_size = htonl(rsp_q_size);
+
+	ha->fw_dump->eft_size = htonl(eft_size);
+	ha->fw_dump->eft_addr_l = htonl(LSD(ha->eft_dma));
+	ha->fw_dump->eft_addr_h = htonl(MSD(ha->eft_dma));
+
+	ha->fw_dump->header_size =
+	    htonl(offsetof(struct qla2xxx_fw_dump, isp));
 }
 
 /**
@@ -810,8 +898,6 @@ qla2x00_resize_request_q(scsi_qla_host_t *ha)
 	dma_addr_t request_dma;
 	request_t *request_ring;
 
-	qla2x00_alloc_fw_dump(ha);
-
 	/* Valid only on recent ISPs. */
 	if (IS_QLA2100(ha) || IS_QLA2200(ha))
 		return;
@@ -883,6 +969,9 @@ qla2x00_setup_chip(scsi_qla_host_t *ha)
 				    &ha->fw_subminor_version,
 				    &ha->fw_attributes, &ha->fw_memory_size);
 				qla2x00_resize_request_q(ha);
+
+				if (ql2xallocfwdump)
+					qla2x00_alloc_fw_dump(ha);
 			}
 		} else {
 			DEBUG2(printk(KERN_INFO
@@ -1186,8 +1275,7 @@ qla2x00_fw_ready(scsi_qla_host_t *ha)
 			rval = QLA_FUNCTION_FAILED;
 
 			if (atomic_read(&ha->loop_down_timer) &&
-			    (fw_state >= FSTATE_LOSS_OF_SYNC ||
-				fw_state == FSTATE_WAIT_AL_PA)) {
+			    fw_state != FSTATE_READY) {
 				/* Loop down. Timeout on min_wait for states
 				 * other than Wait for Login.
 				 */
@@ -1555,6 +1643,8 @@ qla2x00_nvram_config(scsi_qla_host_t *ha)
 	/*
 	 * Set host adapter parameters.
 	 */
+	if (nv->host_p[0] & BIT_7)
+		extended_error_logging = 1;
 	ha->flags.disable_risc_code_load = ((nv->host_p[0] & BIT_4) ? 1 : 0);
 	/* Always load RISC code on non ISP2[12]00 chips. */
 	if (!IS_QLA2100(ha) && !IS_QLA2200(ha))
@@ -1563,6 +1653,7 @@ qla2x00_nvram_config(scsi_qla_host_t *ha)
 	ha->flags.enable_lip_full_login = ((nv->host_p[1] & BIT_2) ? 1 : 0);
 	ha->flags.enable_target_reset = ((nv->host_p[1] & BIT_3) ? 1 : 0);
 	ha->flags.enable_led_scheme = (nv->special_options[1] & BIT_4) ? 1 : 0;
+	ha->flags.disable_serdes = 0;
 
 	ha->operating_mode =
 	    (icb->add_firmware_options[0] & (BIT_6 | BIT_5 | BIT_4)) >> 4;
@@ -1701,7 +1792,7 @@ qla2x00_rport_del(void *data)
  *
  * Returns a pointer to the allocated fcport, or NULL, if none available.
  */
-fc_port_t *
+static fc_port_t *
 qla2x00_alloc_fcport(scsi_qla_host_t *ha, gfp_t flags)
 {
 	fc_port_t *fcport;
@@ -2497,7 +2588,7 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *ha, struct list_head *new_fcports)
  * Context:
  *	Kernel context.
  */
-int
+static int
 qla2x00_find_new_loop_id(scsi_qla_host_t *ha, fc_port_t *dev)
 {
 	int	rval;
@@ -3048,14 +3139,14 @@ qla2x00_abort_isp(scsi_qla_host_t *ha)
 					ha->isp_abort_cnt--;
 					DEBUG(printk("qla%ld: ISP abort - "
 					    "retry remaining %d\n",
-					    ha->host_no, ha->isp_abort_cnt);)
+					    ha->host_no, ha->isp_abort_cnt));
 					status = 1;
 				}
 			} else {
 				ha->isp_abort_cnt = MAX_RETRIES_OF_ISP_ABORT;
 				DEBUG(printk("qla2x00(%ld): ISP error recovery "
 				    "- retrying (%d) more times\n",
-				    ha->host_no, ha->isp_abort_cnt);)
+				    ha->host_no, ha->isp_abort_cnt));
 				set_bit(ISP_ABORT_RETRY, &ha->dpc_flags);
 				status = 1;
 			}
@@ -3069,7 +3160,7 @@ qla2x00_abort_isp(scsi_qla_host_t *ha)
 	} else {
 		DEBUG(printk(KERN_INFO
 				"qla2x00_abort_isp(%ld): exiting.\n",
-				ha->host_no);)
+				ha->host_no));
 	}
 
 	return(status);
@@ -3145,7 +3236,7 @@ qla2x00_restart_isp(scsi_qla_host_t *ha)
 		clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
 		if (!(status = qla2x00_fw_ready(ha))) {
 			DEBUG(printk("%s(): Start configure loop, "
-			    "status = %d\n", __func__, status);)
+			    "status = %d\n", __func__, status));
 
 			/* Issue a marker after FW becomes ready. */
 			qla2x00_marker(ha, 0, 0, MK_SYNC_ALL);
@@ -3169,7 +3260,7 @@ qla2x00_restart_isp(scsi_qla_host_t *ha)
 
 		DEBUG(printk("%s(): Configure loop done, status = 0x%x\n",
 				__func__,
-				status);)
+				status));
 	}
 	return (status);
 }
@@ -3289,7 +3380,6 @@ qla24xx_nvram_config(scsi_qla_host_t *ha)
 		nv->node_name[6] = 0x55;
 		nv->node_name[7] = 0x86;
 		nv->login_retry_count = __constant_cpu_to_le16(8);
-		nv->link_down_timeout = __constant_cpu_to_le16(200);
 		nv->interrupt_delay_timer = __constant_cpu_to_le16(0);
 		nv->login_timeout = __constant_cpu_to_le16(0);
 		nv->firmware_options_1 =
@@ -3318,7 +3408,7 @@ qla24xx_nvram_config(scsi_qla_host_t *ha)
 		*dptr1++ = *dptr2++;
 
 	icb->login_retry_count = nv->login_retry_count;
-	icb->link_down_timeout = nv->link_down_timeout;
+	icb->link_down_on_nos = nv->link_down_on_nos;
 
 	/* Copy 2nd segment. */
 	dptr1 = (uint8_t *)&icb->interrupt_delay_timer;
@@ -3373,6 +3463,7 @@ qla24xx_nvram_config(scsi_qla_host_t *ha)
 	ha->flags.enable_lip_full_login = 1;
 	ha->flags.enable_target_reset = 1;
 	ha->flags.enable_led_scheme = 0;
+	ha->flags.disable_serdes = le32_to_cpu(nv->host_p) & BIT_5 ? 1: 0;
 
 	ha->operating_mode = (le32_to_cpu(icb->firmware_options_2) &
 	    (BIT_6 | BIT_5 | BIT_4)) >> 4;
@@ -3472,7 +3563,7 @@ qla24xx_nvram_config(scsi_qla_host_t *ha)
 	return (rval);
 }
 
-int
+static int
 qla24xx_load_risc_flash(scsi_qla_host_t *ha, uint32_t *srisc_addr)
 {
 	int	rval;

drivers/scsi/qla2xxx/qla_iocb.c

@@ -15,6 +15,7 @@ static inline uint16_t qla2x00_get_cmd_direction(struct scsi_cmnd *cmd);
 static inline cont_entry_t *qla2x00_prep_cont_type0_iocb(scsi_qla_host_t *);
 static inline cont_a64_entry_t *qla2x00_prep_cont_type1_iocb(scsi_qla_host_t *);
 static request_t *qla2x00_req_pkt(scsi_qla_host_t *ha);
+static void qla2x00_isp_cmd(scsi_qla_host_t *ha);
 
 /**
  * qla2x00_get_cmd_direction() - Determine control_flag data direction.
@@ -574,7 +575,7 @@ qla2x00_req_pkt(scsi_qla_host_t *ha)
  *
  * Note: The caller must hold the hardware lock before calling this routine.
  */
-void
+static void
 qla2x00_isp_cmd(scsi_qla_host_t *ha)
 {
 	device_reg_t __iomem *reg = ha->iobase;

drivers/scsi/qla2xxx/qla_isr.c

@@ -395,10 +395,6 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb)
 		set_bit(REGISTER_FC4_NEEDED, &ha->dpc_flags);
 
 		ha->flags.management_server_logged_in = 0;
-
-		/* Update AEN queue. */
-		qla2x00_enqueue_aen(ha, MBA_LIP_OCCURRED, NULL);
-
 		break;
 
 	case MBA_LOOP_UP:		/* Loop Up Event */
@@ -418,9 +414,6 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb)
 		    link_speed);
 
 		ha->flags.management_server_logged_in = 0;
-
-		/* Update AEN queue. */
-		qla2x00_enqueue_aen(ha, MBA_LOOP_UP, NULL);
 		break;
 
 	case MBA_LOOP_DOWN:		/* Loop Down Event */
@@ -439,9 +432,6 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb)
 		ha->link_data_rate = LDR_UNKNOWN;
 		if (ql2xfdmienable)
 			set_bit(REGISTER_FDMI_NEEDED, &ha->dpc_flags);
-
-		/* Update AEN queue. */
-		qla2x00_enqueue_aen(ha, MBA_LOOP_DOWN, NULL);
 		break;
 
 	case MBA_LIP_RESET:		/* LIP reset occurred */
@@ -460,10 +450,6 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb)
 
 		ha->operating_mode = LOOP;
 		ha->flags.management_server_logged_in = 0;
-
-		/* Update AEN queue. */
-		qla2x00_enqueue_aen(ha, MBA_LIP_RESET, NULL);
-
 		break;
 
 	case MBA_POINT_TO_POINT:	/* Point-to-Point */
@@ -545,9 +531,6 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb)
 
 		set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags);
 		set_bit(LOCAL_LOOP_UPDATE, &ha->dpc_flags);
-
-		/* Update AEN queue. */
-		qla2x00_enqueue_aen(ha, MBA_PORT_UPDATE, NULL);
 		break;
 
 	case MBA_RSCN_UPDATE:		/* State Change Registration */
@@ -584,9 +567,6 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb)
 
 		set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags);
 		set_bit(RSCN_UPDATE, &ha->dpc_flags);
-
-		/* Update AEN queue. */
-		qla2x00_enqueue_aen(ha, MBA_RSCN_UPDATE, &mb[0]);
 		break;
 
 	/* case MBA_RIO_RESPONSE: */
@@ -1452,8 +1432,8 @@ qla24xx_ms_entry(scsi_qla_host_t *ha, struct ct_entry_24xx *pkt)
 	DEBUG3(printk("%s(%ld): pkt=%p pkthandle=%d.\n",
 	    __func__, ha->host_no, pkt, pkt->handle));
 
-	DEBUG9(printk("%s: ct pkt dump:\n", __func__);)
-	DEBUG9(qla2x00_dump_buffer((void *)pkt, sizeof(struct ct_entry_24xx));)
+	DEBUG9(printk("%s: ct pkt dump:\n", __func__));
+	DEBUG9(qla2x00_dump_buffer((void *)pkt, sizeof(struct ct_entry_24xx)));
 
 	/* Validate handle. */
  	if (pkt->handle < MAX_OUTSTANDING_COMMANDS)

drivers/scsi/qla2xxx/qla_mbx.c

@@ -13,13 +13,13 @@ qla2x00_mbx_sem_timeout(unsigned long data)
 {
 	struct semaphore	*sem_ptr = (struct semaphore *)data;
 
-	DEBUG11(printk("qla2x00_sem_timeout: entered.\n");)
+	DEBUG11(printk("qla2x00_sem_timeout: entered.\n"));
 
 	if (sem_ptr != NULL) {
 		up(sem_ptr);
 	}
 
-	DEBUG11(printk("qla2x00_mbx_sem_timeout: exiting.\n");)
+	DEBUG11(printk("qla2x00_mbx_sem_timeout: exiting.\n"));
 }
 
 /*
@@ -61,7 +61,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp)
 	rval = QLA_SUCCESS;
 	abort_active = test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags);
 
-	DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no);)
+	DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no));
 
 	/*
 	 * Wait for active mailbox commands to finish by waiting at most tov
@@ -72,7 +72,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp)
 		if (qla2x00_down_timeout(&ha->mbx_cmd_sem, mcp->tov * HZ)) {
 			/* Timeout occurred. Return error. */
 			DEBUG2_3_11(printk("%s(%ld): cmd access timeout. "
-			    "Exiting.\n", __func__, ha->host_no);)
+			    "Exiting.\n", __func__, ha->host_no));
 			return QLA_FUNCTION_TIMEOUT;
 		}
 	}
@@ -86,7 +86,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp)
 		spin_lock_irqsave(&ha->mbx_reg_lock, mbx_flags);
 
 	DEBUG11(printk("scsi(%ld): prepare to issue mbox cmd=0x%x.\n",
-	    ha->host_no, mcp->mb[0]);)
+	    ha->host_no, mcp->mb[0]));
 
 	spin_lock_irqsave(&ha->hardware_lock, flags);
 
@@ -131,14 +131,14 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp)
 
 	/* Unlock mbx registers and wait for interrupt */
 	DEBUG11(printk("%s(%ld): going to unlock irq & waiting for interrupt. "
-	    "jiffies=%lx.\n", __func__, ha->host_no, jiffies);)
+	    "jiffies=%lx.\n", __func__, ha->host_no, jiffies));
 
 	/* Wait for mbx cmd completion until timeout */
 
 	if (!abort_active && io_lock_on) {
 		/* sleep on completion semaphore */
 		DEBUG11(printk("%s(%ld): INTERRUPT MODE. Initializing timer.\n",
-		    __func__, ha->host_no);)
+		    __func__, ha->host_no));
 
 		init_timer(&tmp_intr_timer);
 		tmp_intr_timer.data = (unsigned long)&ha->mbx_intr_sem;
@@ -147,11 +147,11 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp)
 		    (void (*)(unsigned long))qla2x00_mbx_sem_timeout;
 
 		DEBUG11(printk("%s(%ld): Adding timer.\n", __func__,
-		    ha->host_no);)
+		    ha->host_no));
 		add_timer(&tmp_intr_timer);
 
 		DEBUG11(printk("%s(%ld): going to unlock & sleep. "
-		    "time=0x%lx.\n", __func__, ha->host_no, jiffies);)
+		    "time=0x%lx.\n", __func__, ha->host_no, jiffies));
 
 		set_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags);
 
@@ -170,14 +170,14 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp)
 		down(&ha->mbx_intr_sem);
 
 		DEBUG11(printk("%s(%ld): waking up. time=0x%lx\n", __func__,
-		    ha->host_no, jiffies);)
+		    ha->host_no, jiffies));
 		clear_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags);
 
 		/* delete the timer */
 		del_timer(&tmp_intr_timer);
 	} else {
 		DEBUG3_11(printk("%s(%ld): cmd=%x POLLING MODE.\n", __func__,
-		    ha->host_no, command);)
+		    ha->host_no, command));
 
 		if (IS_QLA24XX(ha) || IS_QLA54XX(ha))
 			WRT_REG_DWORD(&reg->isp24.hccr, HCCRX_SET_HOST_INT);
@@ -209,7 +209,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp)
 		uint16_t *iptr2;
 
 		DEBUG3_11(printk("%s(%ld): cmd %x completed.\n", __func__,
-		    ha->host_no, command);)
+		    ha->host_no, command));
 
 		/* Got interrupt. Clear the flag. */
 		ha->flags.mbox_int = 0;
@@ -266,7 +266,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp)
 
 	if (!abort_active) {
 		DEBUG11(printk("%s(%ld): checking for additional resp "
-		    "interrupt.\n", __func__, ha->host_no);)
+		    "interrupt.\n", __func__, ha->host_no));
 
 		/* polling mode for non isp_abort commands. */
 		qla2x00_poll(ha);
@@ -277,9 +277,9 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp)
 		if (!io_lock_on || (mcp->flags & IOCTL_CMD)) {
 			/* not in dpc. schedule it for dpc to take over. */
 			DEBUG(printk("%s(%ld): timeout schedule "
-			    "isp_abort_needed.\n", __func__, ha->host_no);)
+			    "isp_abort_needed.\n", __func__, ha->host_no));
 			DEBUG2_3_11(printk("%s(%ld): timeout schedule "
-			    "isp_abort_needed.\n", __func__, ha->host_no);)
+			    "isp_abort_needed.\n", __func__, ha->host_no));
 			qla_printk(KERN_WARNING, ha,
 			    "Mailbox command timeout occured. Scheduling ISP "
 			    "abort.\n");
@@ -288,9 +288,9 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp)
 		} else if (!abort_active) {
 			/* call abort directly since we are in the DPC thread */
 			DEBUG(printk("%s(%ld): timeout calling abort_isp\n",
-			    __func__, ha->host_no);)
+			    __func__, ha->host_no));
 			DEBUG2_3_11(printk("%s(%ld): timeout calling "
-			    "abort_isp\n", __func__, ha->host_no);)
+			    "abort_isp\n", __func__, ha->host_no));
 			qla_printk(KERN_WARNING, ha,
 			    "Mailbox command timeout occured. Issuing ISP "
 			    "abort.\n");
@@ -303,9 +303,9 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp)
 			}
 			clear_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags);
 			DEBUG(printk("%s(%ld): finished abort_isp\n", __func__,
-			    ha->host_no);)
+			    ha->host_no));
 			DEBUG2_3_11(printk("%s(%ld): finished abort_isp\n",
-			    __func__, ha->host_no);)
+			    __func__, ha->host_no));
 		}
 	}
 
@@ -316,9 +316,9 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp)
 	if (rval) {
 		DEBUG2_3_11(printk("%s(%ld): **** FAILED. mbx0=%x, mbx1=%x, "
 		    "mbx2=%x, cmd=%x ****\n", __func__, ha->host_no,
-		    mcp->mb[0], mcp->mb[1], mcp->mb[2], command);)
+		    mcp->mb[0], mcp->mb[1], mcp->mb[2], command));
 	} else {
-		DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no);)
+		DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no));
 	}
 
 	return rval;
@@ -394,7 +394,7 @@ qla2x00_execute_fw(scsi_qla_host_t *ha, uint32_t risc_addr)
 	mbx_cmd_t mc;
 	mbx_cmd_t *mcp = &mc;
 
-	DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no);)
+	DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no));
 
 	mcp->mb[0] = MBC_EXECUTE_FIRMWARE;
 	mcp->out_mb = MBX_0;
@@ -424,10 +424,10 @@ qla2x00_execute_fw(scsi_qla_host_t *ha, uint32_t risc_addr)
 	} else {
 		if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) {
 			DEBUG11(printk("%s(%ld): done exchanges=%x.\n",
-			    __func__, ha->host_no, mcp->mb[1]);)
+			    __func__, ha->host_no, mcp->mb[1]));
 		} else {
 			DEBUG11(printk("%s(%ld): done.\n", __func__,
-			    ha->host_no);)
+			    ha->host_no));
 		}
 	}
 
@@ -611,7 +611,7 @@ qla2x00_mbx_reg_test(scsi_qla_host_t *ha)
 	mbx_cmd_t mc;
 	mbx_cmd_t *mcp = &mc;
 
-	DEBUG11(printk("qla2x00_mbx_reg_test(%ld): entered.\n", ha->host_no);)
+	DEBUG11(printk("qla2x00_mbx_reg_test(%ld): entered.\n", ha->host_no));
 
 	mcp->mb[0] = MBC_MAILBOX_REGISTER_TEST;
 	mcp->mb[1] = 0xAAAA;
@@ -639,11 +639,11 @@ qla2x00_mbx_reg_test(scsi_qla_host_t *ha)
 	if (rval != QLA_SUCCESS) {
 		/*EMPTY*/
 		DEBUG2_3_11(printk("qla2x00_mbx_reg_test(%ld): failed=%x.\n",
-		    ha->host_no, rval);)
+		    ha->host_no, rval));
 	} else {
 		/*EMPTY*/
 		DEBUG11(printk("qla2x00_mbx_reg_test(%ld): done.\n",
-		    ha->host_no);)
+		    ha->host_no));
 	}
 
 	return rval;
@@ -671,7 +671,7 @@ qla2x00_verify_checksum(scsi_qla_host_t *ha, uint32_t risc_addr)
 	mbx_cmd_t mc;
 	mbx_cmd_t *mcp = &mc;
 
-	DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no);)
+	DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no));
 
 	mcp->mb[0] = MBC_VERIFY_CHECKSUM;
 	mcp->out_mb = MBX_0;
@@ -694,9 +694,9 @@ qla2x00_verify_checksum(scsi_qla_host_t *ha, uint32_t risc_addr)
 	if (rval != QLA_SUCCESS) {
 		DEBUG2_3_11(printk("%s(%ld): failed=%x chk sum=%x.\n", __func__,
 		    ha->host_no, rval, (IS_QLA24XX(ha) || IS_QLA54XX(ha) ?
-		    (mcp->mb[2] << 16) | mcp->mb[1]: mcp->mb[1]));)
+		    (mcp->mb[2] << 16) | mcp->mb[1]: mcp->mb[1])));
 	} else {
-		DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no);)
+		DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no));
 	}
 
 	return rval;
@@ -743,9 +743,9 @@ qla2x00_issue_iocb(scsi_qla_host_t *ha, void*  buffer, dma_addr_t phys_addr,
 	if (rval != QLA_SUCCESS) {
 		/*EMPTY*/
 		DEBUG(printk("qla2x00_issue_iocb(%ld): failed rval 0x%x\n",
-		    ha->host_no, rval);)
+		    ha->host_no, rval));
 		DEBUG2(printk("qla2x00_issue_iocb(%ld): failed rval 0x%x\n",
-		    ha->host_no, rval);)
+		    ha->host_no, rval));
 	} else {
 		sts_entry_t *sts_entry = (sts_entry_t *) buffer;
 
@@ -781,7 +781,7 @@ qla2x00_abort_command(scsi_qla_host_t *ha, srb_t *sp)
 	mbx_cmd_t	mc;
 	mbx_cmd_t	*mcp = &mc;
 
-	DEBUG11(printk("qla2x00_abort_command(%ld): entered.\n", ha->host_no);)
+	DEBUG11(printk("qla2x00_abort_command(%ld): entered.\n", ha->host_no));
 
 	fcport = sp->fcport;
 
@@ -813,11 +813,11 @@ qla2x00_abort_command(scsi_qla_host_t *ha, srb_t *sp)
 
 	if (rval != QLA_SUCCESS) {
 		DEBUG2_3_11(printk("qla2x00_abort_command(%ld): failed=%x.\n",
-		    ha->host_no, rval);)
+		    ha->host_no, rval));
 	} else {
 		sp->flags |= SRB_ABORT_PENDING;
 		DEBUG11(printk("qla2x00_abort_command(%ld): done.\n",
-		    ha->host_no);)
+		    ha->host_no));
 	}
 
 	return rval;
@@ -848,7 +848,7 @@ qla2x00_abort_target(fc_port_t *fcport)
 	if (fcport == NULL)
 		return 0;
 
-	DEBUG11(printk("%s(%ld): entered.\n", __func__, fcport->ha->host_no);)
+	DEBUG11(printk("%s(%ld): entered.\n", __func__, fcport->ha->host_no));
 
 	ha = fcport->ha;
 	mcp->mb[0] = MBC_ABORT_TARGET;
@@ -872,11 +872,11 @@ qla2x00_abort_target(fc_port_t *fcport)
 
 	if (rval != QLA_SUCCESS) {
 		DEBUG2_3_11(printk("qla2x00_abort_target(%ld): failed=%x.\n",
-		    ha->host_no, rval);)
+		    ha->host_no, rval));
 	} else {
 		/*EMPTY*/
 		DEBUG11(printk("qla2x00_abort_target(%ld): done.\n",
-		    ha->host_no);)
+		    ha->host_no));
 	}
 
 	return rval;
@@ -912,7 +912,7 @@ qla2x00_get_adapter_id(scsi_qla_host_t *ha, uint16_t *id, uint8_t *al_pa,
 	mbx_cmd_t *mcp = &mc;
 
 	DEBUG11(printk("qla2x00_get_adapter_id(%ld): entered.\n",
-	    ha->host_no);)
+	    ha->host_no));
 
 	mcp->mb[0] = MBC_GET_ADAPTER_LOOP_ID;
 	mcp->out_mb = MBX_0;
@@ -933,11 +933,11 @@ qla2x00_get_adapter_id(scsi_qla_host_t *ha, uint16_t *id, uint8_t *al_pa,
 	if (rval != QLA_SUCCESS) {
 		/*EMPTY*/
 		DEBUG2_3_11(printk("qla2x00_get_adapter_id(%ld): failed=%x.\n",
-		    ha->host_no, rval);)
+		    ha->host_no, rval));
 	} else {
 		/*EMPTY*/
 		DEBUG11(printk("qla2x00_get_adapter_id(%ld): done.\n",
-		    ha->host_no);)
+		    ha->host_no));
 	}
 
 	return rval;
@@ -968,7 +968,7 @@ qla2x00_get_retry_cnt(scsi_qla_host_t *ha, uint8_t *retry_cnt, uint8_t *tov,
 	mbx_cmd_t *mcp = &mc;
 
 	DEBUG11(printk("qla2x00_get_retry_cnt(%ld): entered.\n",
-			ha->host_no);)
+			ha->host_no));
 
 	mcp->mb[0] = MBC_GET_RETRY_COUNT;
 	mcp->out_mb = MBX_0;
@@ -980,7 +980,7 @@ qla2x00_get_retry_cnt(scsi_qla_host_t *ha, uint8_t *retry_cnt, uint8_t *tov,
 	if (rval != QLA_SUCCESS) {
 		/*EMPTY*/
 		DEBUG2_3_11(printk("qla2x00_get_retry_cnt(%ld): failed = %x.\n",
-		    ha->host_no, mcp->mb[0]);)
+		    ha->host_no, mcp->mb[0]));
 	} else {
 		/* Convert returned data and check our values. */
 		*r_a_tov = mcp->mb[3] / 2;
@@ -992,7 +992,7 @@ qla2x00_get_retry_cnt(scsi_qla_host_t *ha, uint8_t *retry_cnt, uint8_t *tov,
 		}
 
 		DEBUG11(printk("qla2x00_get_retry_cnt(%ld): done. mb3=%d "
-		    "ratov=%d.\n", ha->host_no, mcp->mb[3], ratov);)
+		    "ratov=%d.\n", ha->host_no, mcp->mb[3], ratov));
 	}
 
 	return rval;
@@ -1023,7 +1023,7 @@ qla2x00_init_firmware(scsi_qla_host_t *ha, uint16_t size)
 	mbx_cmd_t *mcp = &mc;
 
 	DEBUG11(printk("qla2x00_init_firmware(%ld): entered.\n",
-	    ha->host_no);)
+	    ha->host_no));
 
 	mcp->mb[0] = MBC_INITIALIZE_FIRMWARE;
 	mcp->mb[2] = MSW(ha->init_cb_dma);
@@ -1043,11 +1043,11 @@ qla2x00_init_firmware(scsi_qla_host_t *ha, uint16_t size)
 		/*EMPTY*/
 		DEBUG2_3_11(printk("qla2x00_init_firmware(%ld): failed=%x "
 		    "mb0=%x.\n",
-		    ha->host_no, rval, mcp->mb[0]);)
+		    ha->host_no, rval, mcp->mb[0]));
 	} else {
 		/*EMPTY*/
 		DEBUG11(printk("qla2x00_init_firmware(%ld): done.\n",
-		    ha->host_no);)
+		    ha->host_no));
 	}
 
 	return rval;
@@ -1079,7 +1079,7 @@ qla2x00_get_port_database(scsi_qla_host_t *ha, fc_port_t *fcport, uint8_t opt)
 	struct port_database_24xx *pd24;
 	dma_addr_t pd_dma;
 
-	DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no);)
+	DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no));
 
 	pd24 = NULL;
 	pd = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &pd_dma);
@@ -1220,7 +1220,7 @@ qla2x00_get_firmware_state(scsi_qla_host_t *ha, uint16_t *dptr)
 	mbx_cmd_t *mcp = &mc;
 
 	DEBUG11(printk("qla2x00_get_firmware_state(%ld): entered.\n",
-	    ha->host_no);)
+	    ha->host_no));
 
 	mcp->mb[0] = MBC_GET_FIRMWARE_STATE;
 	mcp->out_mb = MBX_0;
@@ -1235,11 +1235,11 @@ qla2x00_get_firmware_state(scsi_qla_host_t *ha, uint16_t *dptr)
 	if (rval != QLA_SUCCESS) {
 		/*EMPTY*/
 		DEBUG2_3_11(printk("qla2x00_get_firmware_state(%ld): "
-		    "failed=%x.\n", ha->host_no, rval);)
+		    "failed=%x.\n", ha->host_no, rval));
 	} else {
 		/*EMPTY*/
 		DEBUG11(printk("qla2x00_get_firmware_state(%ld): done.\n",
-		    ha->host_no);)
+		    ha->host_no));
 	}
 
 	return rval;
@@ -1272,7 +1272,7 @@ qla2x00_get_port_name(scsi_qla_host_t *ha, uint16_t loop_id, uint8_t *name,
 	mbx_cmd_t *mcp = &mc;
 
 	DEBUG11(printk("qla2x00_get_port_name(%ld): entered.\n",
-	    ha->host_no);)
+	    ha->host_no));
 
 	mcp->mb[0] = MBC_GET_PORT_NAME;
 	mcp->out_mb = MBX_1|MBX_0;
@@ -1292,7 +1292,7 @@ qla2x00_get_port_name(scsi_qla_host_t *ha, uint16_t loop_id, uint8_t *name,
 	if (rval != QLA_SUCCESS) {
 		/*EMPTY*/
 		DEBUG2_3_11(printk("qla2x00_get_port_name(%ld): failed=%x.\n",
-		    ha->host_no, rval);)
+		    ha->host_no, rval));
 	} else {
 		if (name != NULL) {
 			/* This function returns name in big endian. */
@@ -1307,7 +1307,7 @@ qla2x00_get_port_name(scsi_qla_host_t *ha, uint16_t loop_id, uint8_t *name,
 		}
 
 		DEBUG11(printk("qla2x00_get_port_name(%ld): done.\n",
-		    ha->host_no);)
+		    ha->host_no));
 	}
 
 	return rval;
@@ -1335,7 +1335,7 @@ qla2x00_lip_reset(scsi_qla_host_t *ha)
 	mbx_cmd_t mc;
 	mbx_cmd_t *mcp = &mc;
 
-	DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no);)
+	DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no));
 
 	if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) {
 		mcp->mb[0] = MBC_LIP_FULL_LOGIN;
@@ -1364,10 +1364,10 @@ qla2x00_lip_reset(scsi_qla_host_t *ha)
 	if (rval != QLA_SUCCESS) {
 		/*EMPTY*/
 		DEBUG2_3_11(printk("%s(%ld): failed=%x.\n",
-		    __func__, ha->host_no, rval);)
+		    __func__, ha->host_no, rval));
 	} else {
 		/*EMPTY*/
-		DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no);)
+		DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no));
 	}
 
 	return rval;
@@ -1400,10 +1400,10 @@ qla2x00_send_sns(scsi_qla_host_t *ha, dma_addr_t sns_phys_address,
 	mbx_cmd_t *mcp = &mc;
 
 	DEBUG11(printk("qla2x00_send_sns(%ld): entered.\n",
-	    ha->host_no);)
+	    ha->host_no));
 
 	DEBUG11(printk("qla2x00_send_sns: retry cnt=%d ratov=%d total "
-	    "tov=%d.\n", ha->retry_count, ha->login_timeout, mcp->tov);)
+	    "tov=%d.\n", ha->retry_count, ha->login_timeout, mcp->tov));
 
 	mcp->mb[0] = MBC_SEND_SNS_COMMAND;
 	mcp->mb[1] = cmd_size;
@@ -1421,12 +1421,12 @@ qla2x00_send_sns(scsi_qla_host_t *ha, dma_addr_t sns_phys_address,
 	if (rval != QLA_SUCCESS) {
 		/*EMPTY*/
 		DEBUG(printk("qla2x00_send_sns(%ld): failed=%x mb[0]=%x "
-		    "mb[1]=%x.\n", ha->host_no, rval, mcp->mb[0], mcp->mb[1]);)
+		    "mb[1]=%x.\n", ha->host_no, rval, mcp->mb[0], mcp->mb[1]));
 		DEBUG2_3_11(printk("qla2x00_send_sns(%ld): failed=%x mb[0]=%x "
-		    "mb[1]=%x.\n", ha->host_no, rval, mcp->mb[0], mcp->mb[1]);)
+		    "mb[1]=%x.\n", ha->host_no, rval, mcp->mb[0], mcp->mb[1]));
 	} else {
 		/*EMPTY*/
-		DEBUG11(printk("qla2x00_send_sns(%ld): done.\n", ha->host_no);)
+		DEBUG11(printk("qla2x00_send_sns(%ld): done.\n", ha->host_no));
 	}
 
 	return rval;
@@ -1442,7 +1442,7 @@ qla24xx_login_fabric(scsi_qla_host_t *ha, uint16_t loop_id, uint8_t domain,
 	dma_addr_t	lg_dma;
 	uint32_t	iop[2];
 
-	DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no);)
+	DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no));
 
 	lg = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &lg_dma);
 	if (lg == NULL) {
@@ -1458,13 +1458,15 @@ qla24xx_login_fabric(scsi_qla_host_t *ha, uint16_t loop_id, uint8_t domain,
 	lg->control_flags = __constant_cpu_to_le16(LCF_COMMAND_PLOGI);
 	if (opt & BIT_0)
 		lg->control_flags |= __constant_cpu_to_le16(LCF_COND_PLOGI);
+	if (opt & BIT_1)
+		lg->control_flags |= __constant_cpu_to_le16(LCF_SKIP_PRLI);
 	lg->port_id[0] = al_pa;
 	lg->port_id[1] = area;
 	lg->port_id[2] = domain;
 	rval = qla2x00_issue_iocb(ha, lg, lg_dma, 0);
 	if (rval != QLA_SUCCESS) {
 		DEBUG2_3_11(printk("%s(%ld): failed to issue Login IOCB "
-		    "(%x).\n", __func__, ha->host_no, rval);)
+		    "(%x).\n", __func__, ha->host_no, rval));
 	} else if (lg->entry_status != 0) {
 		DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
 		    "-- error status (%x).\n", __func__, ha->host_no,
@@ -1505,7 +1507,7 @@ qla24xx_login_fabric(scsi_qla_host_t *ha, uint16_t loop_id, uint8_t domain,
 			break;
 		}
 	} else {
-		DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no);)
+		DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no));
 
 		iop[0] = le32_to_cpu(lg->io_parameter[0]);
 
@@ -1559,7 +1561,7 @@ qla2x00_login_fabric(scsi_qla_host_t *ha, uint16_t loop_id, uint8_t domain,
 	mbx_cmd_t mc;
 	mbx_cmd_t *mcp = &mc;
 
-	DEBUG11(printk("qla2x00_login_fabric(%ld): entered.\n", ha->host_no);)
+	DEBUG11(printk("qla2x00_login_fabric(%ld): entered.\n", ha->host_no));
 
 	mcp->mb[0] = MBC_LOGIN_FABRIC_PORT;
 	mcp->out_mb = MBX_3|MBX_2|MBX_1|MBX_0;
@@ -1604,11 +1606,11 @@ qla2x00_login_fabric(scsi_qla_host_t *ha, uint16_t loop_id, uint8_t domain,
 		/*EMPTY*/
 		DEBUG2_3_11(printk("qla2x00_login_fabric(%ld): failed=%x "
 		    "mb[0]=%x mb[1]=%x mb[2]=%x.\n", ha->host_no, rval,
-		    mcp->mb[0], mcp->mb[1], mcp->mb[2]);)
+		    mcp->mb[0], mcp->mb[1], mcp->mb[2]));
 	} else {
 		/*EMPTY*/
 		DEBUG11(printk("qla2x00_login_fabric(%ld): done.\n",
-		    ha->host_no);)
+		    ha->host_no));
 	}
 
 	return rval;
@@ -1643,7 +1645,7 @@ qla2x00_login_local_device(scsi_qla_host_t *ha, fc_port_t *fcport,
 		    fcport->d_id.b.domain, fcport->d_id.b.area,
 		    fcport->d_id.b.al_pa, mb_ret, opt);
 
-	DEBUG3(printk("%s(%ld): entered.\n", __func__, ha->host_no);)
+	DEBUG3(printk("%s(%ld): entered.\n", __func__, ha->host_no));
 
 	mcp->mb[0] = MBC_LOGIN_LOOP_PORT;
 	if (HAS_EXTENDED_IDS(ha))
@@ -1677,13 +1679,13 @@ qla2x00_login_local_device(scsi_qla_host_t *ha, fc_port_t *fcport,
 
 		DEBUG(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x "
 		    "mb[6]=%x mb[7]=%x.\n", __func__, ha->host_no, rval,
-		    mcp->mb[0], mcp->mb[1], mcp->mb[6], mcp->mb[7]);)
+		    mcp->mb[0], mcp->mb[1], mcp->mb[6], mcp->mb[7]));
 		DEBUG2_3(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x "
 		    "mb[6]=%x mb[7]=%x.\n", __func__, ha->host_no, rval,
-		    mcp->mb[0], mcp->mb[1], mcp->mb[6], mcp->mb[7]);)
+		    mcp->mb[0], mcp->mb[1], mcp->mb[6], mcp->mb[7]));
 	} else {
 		/*EMPTY*/
-		DEBUG3(printk("%s(%ld): done.\n", __func__, ha->host_no);)
+		DEBUG3(printk("%s(%ld): done.\n", __func__, ha->host_no));
 	}
 
 	return (rval);
@@ -1697,7 +1699,7 @@ qla24xx_fabric_logout(scsi_qla_host_t *ha, uint16_t loop_id, uint8_t domain,
 	struct logio_entry_24xx *lg;
 	dma_addr_t	lg_dma;
 
-	DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no);)
+	DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no));
 
 	lg = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &lg_dma);
 	if (lg == NULL) {
@@ -1718,7 +1720,7 @@ qla24xx_fabric_logout(scsi_qla_host_t *ha, uint16_t loop_id, uint8_t domain,
 	rval = qla2x00_issue_iocb(ha, lg, lg_dma, 0);
 	if (rval != QLA_SUCCESS) {
 		DEBUG2_3_11(printk("%s(%ld): failed to issue Logout IOCB "
-		    "(%x).\n", __func__, ha->host_no, rval);)
+		    "(%x).\n", __func__, ha->host_no, rval));
 	} else if (lg->entry_status != 0) {
 		DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
 		    "-- error status (%x).\n", __func__, ha->host_no,
@@ -1729,10 +1731,10 @@ qla24xx_fabric_logout(scsi_qla_host_t *ha, uint16_t loop_id, uint8_t domain,
 		    "-- completion status (%x)  ioparam=%x/%x.\n", __func__,
 		    ha->host_no, le16_to_cpu(lg->comp_status),
 		    le32_to_cpu(lg->io_parameter[0]),
-		    le32_to_cpu(lg->io_parameter[1]));)
+		    le32_to_cpu(lg->io_parameter[1])));
 	} else {
 		/*EMPTY*/
-		DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no);)
+		DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no));
 	}
 
 	dma_pool_free(ha->s_dma_pool, lg, lg_dma);
@@ -1765,7 +1767,7 @@ qla2x00_fabric_logout(scsi_qla_host_t *ha, uint16_t loop_id, uint8_t domain,
 	mbx_cmd_t *mcp = &mc;
 
 	DEBUG11(printk("qla2x00_fabric_logout(%ld): entered.\n",
-	    ha->host_no);)
+	    ha->host_no));
 
 	mcp->mb[0] = MBC_LOGOUT_FABRIC_PORT;
 	mcp->out_mb = MBX_1|MBX_0;
@@ -1785,11 +1787,11 @@ qla2x00_fabric_logout(scsi_qla_host_t *ha, uint16_t loop_id, uint8_t domain,
 	if (rval != QLA_SUCCESS) {
 		/*EMPTY*/
 		DEBUG2_3_11(printk("qla2x00_fabric_logout(%ld): failed=%x "
-		    "mbx1=%x.\n", ha->host_no, rval, mcp->mb[1]);)
+		    "mbx1=%x.\n", ha->host_no, rval, mcp->mb[1]));
 	} else {
 		/*EMPTY*/
 		DEBUG11(printk("qla2x00_fabric_logout(%ld): done.\n",
-		    ha->host_no);)
+		    ha->host_no));
 	}
 
 	return rval;
@@ -1818,7 +1820,7 @@ qla2x00_full_login_lip(scsi_qla_host_t *ha)
 	mbx_cmd_t *mcp = &mc;
 
 	DEBUG11(printk("qla2x00_full_login_lip(%ld): entered.\n",
-	    ha->host_no);)
+	    ha->host_no));
 
 	mcp->mb[0] = MBC_LIP_FULL_LOGIN;
 	mcp->mb[1] = 0;
@@ -1833,11 +1835,11 @@ qla2x00_full_login_lip(scsi_qla_host_t *ha)
 	if (rval != QLA_SUCCESS) {
 		/*EMPTY*/
 		DEBUG2_3_11(printk("qla2x00_full_login_lip(%ld): failed=%x.\n",
-		    ha->host_no, rval);)
+		    ha->host_no, rval));
 	} else {
 		/*EMPTY*/
 		DEBUG11(printk("qla2x00_full_login_lip(%ld): done.\n",
-		    ha->host_no);)
+		    ha->host_no));
 	}
 
 	return rval;
@@ -1864,7 +1866,7 @@ qla2x00_get_id_list(scsi_qla_host_t *ha, void *id_list, dma_addr_t id_list_dma,
 	mbx_cmd_t *mcp = &mc;
 
 	DEBUG11(printk("qla2x00_get_id_list(%ld): entered.\n",
-	    ha->host_no);)
+	    ha->host_no));
 
 	if (id_list == NULL)
 		return QLA_FUNCTION_FAILED;
@@ -1893,11 +1895,11 @@ qla2x00_get_id_list(scsi_qla_host_t *ha, void *id_list, dma_addr_t id_list_dma,
 	if (rval != QLA_SUCCESS) {
 		/*EMPTY*/
 		DEBUG2_3_11(printk("qla2x00_get_id_list(%ld): failed=%x.\n",
-		    ha->host_no, rval);)
+		    ha->host_no, rval));
 	} else {
 		*entries = mcp->mb[1];
 		DEBUG11(printk("qla2x00_get_id_list(%ld): done.\n",
-		    ha->host_no);)
+		    ha->host_no));
 	}
 
 	return rval;
@@ -1936,7 +1938,7 @@ qla2x00_get_resource_cnts(scsi_qla_host_t *ha, uint16_t *cur_xchg_cnt,
 	if (rval != QLA_SUCCESS) {
 		/*EMPTY*/
 		DEBUG2_3_11(printk("%s(%ld): failed = %x.\n", __func__,
-		    ha->host_no, mcp->mb[0]);)
+		    ha->host_no, mcp->mb[0]));
 	} else {
 		DEBUG11(printk("%s(%ld): done. mb1=%x mb2=%x mb3=%x mb6=%x "
 		    "mb7=%x mb10=%x.\n", __func__, ha->host_no,
@@ -2045,7 +2047,7 @@ qla2x00_get_link_status(scsi_qla_host_t *ha, uint16_t loop_id,
 	link_stat_t *stat_buf;
 	dma_addr_t stat_buf_dma;
 
-	DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no);)
+	DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no));
 
 	stat_buf = dma_pool_alloc(ha->s_dma_pool, GFP_ATOMIC, &stat_buf_dma);
 	if (stat_buf == NULL) {
@@ -2083,7 +2085,7 @@ qla2x00_get_link_status(scsi_qla_host_t *ha, uint16_t loop_id,
 	if (rval == QLA_SUCCESS) {
 		if (mcp->mb[0] != MBS_COMMAND_COMPLETE) {
 			DEBUG2_3_11(printk("%s(%ld): cmd failed. mbx0=%x.\n",
-			    __func__, ha->host_no, mcp->mb[0]);)
+			    __func__, ha->host_no, mcp->mb[0]));
 			status[0] = mcp->mb[0];
 			rval = BIT_1;
 		} else {
@@ -2108,12 +2110,12 @@ qla2x00_get_link_status(scsi_qla_host_t *ha, uint16_t loop_id,
 			    stat_buf->loss_sync_cnt, stat_buf->loss_sig_cnt,
 			    stat_buf->prim_seq_err_cnt,
 			    stat_buf->inval_xmit_word_cnt,
-			    stat_buf->inval_crc_cnt);)
+			    stat_buf->inval_crc_cnt));
 		}
 	} else {
 		/* Failed. */
 		DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__,
-		    ha->host_no, rval);)
+		    ha->host_no, rval));
 		rval = BIT_1;
 	}
 
@@ -2132,7 +2134,7 @@ qla24xx_get_isp_stats(scsi_qla_host_t *ha, uint32_t *dwbuf, uint32_t dwords,
 	uint32_t *sbuf, *siter;
 	dma_addr_t sbuf_dma;
 
-	DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no);)
+	DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no));
 
 	if (dwords > (DMA_POOL_SIZE / 4)) {
 		DEBUG2_3_11(printk("%s(%ld): Unabled to retrieve %d DWORDs "
@@ -2196,7 +2198,7 @@ qla24xx_abort_command(scsi_qla_host_t *ha, srb_t *sp)
 	dma_addr_t	abt_dma;
 	uint32_t	handle;
 
-	DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no);)
+	DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no));
 
 	fcport = sp->fcport;
 
@@ -2229,7 +2231,7 @@ qla24xx_abort_command(scsi_qla_host_t *ha, srb_t *sp)
 	rval = qla2x00_issue_iocb(ha, abt, abt_dma, 0);
 	if (rval != QLA_SUCCESS) {
 		DEBUG2_3_11(printk("%s(%ld): failed to issue IOCB (%x).\n",
-		    __func__, ha->host_no, rval);)
+		    __func__, ha->host_no, rval));
 	} else if (abt->entry_status != 0) {
 		DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
 		    "-- error status (%x).\n", __func__, ha->host_no,
@@ -2238,10 +2240,10 @@ qla24xx_abort_command(scsi_qla_host_t *ha, srb_t *sp)
 	} else if (abt->nport_handle != __constant_cpu_to_le16(0)) {
 		DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
 		    "-- completion status (%x).\n", __func__, ha->host_no,
-		    le16_to_cpu(abt->nport_handle));)
+		    le16_to_cpu(abt->nport_handle)));
 		rval = QLA_FUNCTION_FAILED;
 	} else {
-		DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no);)
+		DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no));
 		sp->flags |= SRB_ABORT_PENDING;
 	}
 
@@ -2268,7 +2270,7 @@ qla24xx_abort_target(fc_port_t *fcport)
 	if (fcport == NULL)
 		return 0;
 
-	DEBUG11(printk("%s(%ld): entered.\n", __func__, fcport->ha->host_no);)
+	DEBUG11(printk("%s(%ld): entered.\n", __func__, fcport->ha->host_no));
 
 	ha = fcport->ha;
 	tsk = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &tsk_dma);
@@ -2290,7 +2292,7 @@ qla24xx_abort_target(fc_port_t *fcport)
 	rval = qla2x00_issue_iocb(ha, tsk, tsk_dma, 0);
 	if (rval != QLA_SUCCESS) {
 		DEBUG2_3_11(printk("%s(%ld): failed to issue Target Reset IOCB "
-		    "(%x).\n", __func__, ha->host_no, rval);)
+		    "(%x).\n", __func__, ha->host_no, rval));
 		goto atarget_done;
 	} else if (tsk->p.sts.entry_status != 0) {
 		DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
@@ -2302,7 +2304,7 @@ qla24xx_abort_target(fc_port_t *fcport)
 	    __constant_cpu_to_le16(CS_COMPLETE)) {
 		DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
 		    "-- completion status (%x).\n", __func__,
-		    ha->host_no, le16_to_cpu(tsk->p.sts.comp_status));)
+		    ha->host_no, le16_to_cpu(tsk->p.sts.comp_status)));
 		rval = QLA_FUNCTION_FAILED;
 		goto atarget_done;
 	}
@@ -2311,9 +2313,9 @@ qla24xx_abort_target(fc_port_t *fcport)
 	rval = qla2x00_marker(ha, fcport->loop_id, 0, MK_SYNC_ID);
 	if (rval != QLA_SUCCESS) {
 		DEBUG2_3_11(printk("%s(%ld): failed to issue Marker IOCB "
-		    "(%x).\n", __func__, ha->host_no, rval);)
+		    "(%x).\n", __func__, ha->host_no, rval));
 	} else {
-		DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no);)
+		DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no));
 	}
 
 atarget_done:
@@ -2460,3 +2462,81 @@ qla2x00_stop_firmware(scsi_qla_host_t *ha)
 
 	return rval;
 }
+
+int
+qla2x00_trace_control(scsi_qla_host_t *ha, uint16_t ctrl, dma_addr_t eft_dma,
+    uint16_t buffers)
+{
+	int rval;
+	mbx_cmd_t mc;
+	mbx_cmd_t *mcp = &mc;
+
+	if (!IS_QLA24XX(ha) && !IS_QLA54XX(ha))
+		return QLA_FUNCTION_FAILED;
+
+	DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no));
+
+	mcp->mb[0] = MBC_TRACE_CONTROL;
+	mcp->mb[1] = ctrl;
+	mcp->out_mb = MBX_1|MBX_0;
+	mcp->in_mb = MBX_1|MBX_0;
+	if (ctrl == TC_ENABLE) {
+		mcp->mb[2] = LSW(eft_dma);
+		mcp->mb[3] = MSW(eft_dma);
+		mcp->mb[4] = LSW(MSD(eft_dma));
+		mcp->mb[5] = MSW(MSD(eft_dma));
+		mcp->mb[6] = buffers;
+		mcp->mb[7] = buffers;
+		mcp->out_mb |= MBX_7|MBX_6|MBX_5|MBX_4|MBX_3|MBX_2;
+	}
+	mcp->tov = 30;
+	mcp->flags = 0;
+	rval = qla2x00_mailbox_command(ha, mcp);
+
+	if (rval != QLA_SUCCESS) {
+		DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n",
+		    __func__, ha->host_no, rval, mcp->mb[0], mcp->mb[1]));
+	} else {
+		DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no));
+	}
+
+	return rval;
+}
+
+int
+qla2x00_read_sfp(scsi_qla_host_t *ha, dma_addr_t sfp_dma, uint16_t addr,
+    uint16_t off, uint16_t count)
+{
+	int rval;
+	mbx_cmd_t mc;
+	mbx_cmd_t *mcp = &mc;
+
+	if (!IS_QLA24XX(ha) && !IS_QLA54XX(ha))
+		return QLA_FUNCTION_FAILED;
+
+	DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no));
+
+	mcp->mb[0] = MBC_READ_SFP;
+	mcp->mb[1] = addr;
+	mcp->mb[2] = MSW(sfp_dma);
+	mcp->mb[3] = LSW(sfp_dma);
+	mcp->mb[6] = MSW(MSD(sfp_dma));
+	mcp->mb[7] = LSW(MSD(sfp_dma));
+	mcp->mb[8] = count;
+	mcp->mb[9] = off;
+	mcp->mb[10] = 0;
+	mcp->out_mb = MBX_10|MBX_9|MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
+	mcp->in_mb = MBX_0;
+	mcp->tov = 30;
+	mcp->flags = 0;
+	rval = qla2x00_mailbox_command(ha, mcp);
+
+	if (rval != QLA_SUCCESS) {
+		DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__,
+		    ha->host_no, rval, mcp->mb[0]));
+	} else {
+		DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no));
+	}
+
+	return rval;
+}

drivers/scsi/qla2xxx/qla_os.c

@@ -39,14 +39,14 @@ MODULE_PARM_DESC(ql2xlogintimeout,
 int qlport_down_retry = 30;
 module_param(qlport_down_retry, int, S_IRUGO|S_IRUSR);
 MODULE_PARM_DESC(qlport_down_retry,
-		"Maximum number of command retries to a port that returns"
+		"Maximum number of command retries to a port that returns "
 		"a PORT-DOWN status.");
 
 int ql2xplogiabsentdevice;
 module_param(ql2xplogiabsentdevice, int, S_IRUGO|S_IWUSR);
 MODULE_PARM_DESC(ql2xplogiabsentdevice,
 		"Option to enable PLOGI to devices that are not present after "
-		"a Fabric scan.  This is needed for several broken switches."
+		"a Fabric scan.  This is needed for several broken switches. "
 		"Default is 0 - no PLOGI. 1 - perfom PLOGI.");
 
 int ql2xloginretrycount = 0;
@@ -54,6 +54,19 @@ module_param(ql2xloginretrycount, int, S_IRUGO|S_IRUSR);
 MODULE_PARM_DESC(ql2xloginretrycount,
 		"Specify an alternate value for the NVRAM login retry count.");
 
+int ql2xallocfwdump = 1;
+module_param(ql2xallocfwdump, int, S_IRUGO|S_IRUSR);
+MODULE_PARM_DESC(ql2xallocfwdump,
+		"Option to enable allocation of memory for a firmware dump "
+		"during HBA initialization.  Memory allocation requirements "
+		"vary by ISP type.  Default is 1 - allocate memory.");
+
+int extended_error_logging;
+module_param(extended_error_logging, int, S_IRUGO|S_IRUSR);
+MODULE_PARM_DESC(extended_error_logging,
+		"Option to enable extended error logging, "
+		"Default is 0 - no logging. 1 - log errors.");
+
 static void qla2x00_free_device(scsi_qla_host_t *);
 
 static void qla2x00_config_dma_addressing(scsi_qla_host_t *ha);
@@ -624,7 +637,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 
 		DEBUG2(printk("%s(%ld): aborting sp %p from RISC. pid=%ld.\n",
 		    __func__, ha->host_no, sp, serial));
-		DEBUG3(qla2x00_print_scsi_cmd(cmd);)
+		DEBUG3(qla2x00_print_scsi_cmd(cmd));
 
 		spin_unlock_irqrestore(&ha->hardware_lock, flags);
 		if (ha->isp_ops.abort_command(ha, sp)) {
@@ -766,7 +779,7 @@ qla2xxx_eh_device_reset(struct scsi_cmnd *cmd)
 #endif
 	} else {
 		DEBUG2(printk(KERN_INFO
-		    "%s failed: loop not ready\n",__func__);)
+		    "%s failed: loop not ready\n",__func__));
 	}
 
 	if (ret == FAILED) {
@@ -1021,12 +1034,12 @@ qla2x00_loop_reset(scsi_qla_host_t *ha)
 		/* Empty */
 		DEBUG2_3(printk("%s(%ld): **** FAILED ****\n",
 				__func__,
-				ha->host_no);)
+				ha->host_no));
 	} else {
 		/* Empty */
 		DEBUG3(printk("%s(%ld): exiting normally.\n",
 				__func__,
-				ha->host_no);)
+				ha->host_no));
 	}
 
 	return(status);
@@ -1324,7 +1337,8 @@ qla24xx_disable_intrs(scsi_qla_host_t *ha)
 /*
  * PCI driver interface
  */
-static int qla2x00_probe_one(struct pci_dev *pdev)
+static int __devinit
+qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	int	ret = -ENODEV;
 	device_reg_t __iomem *reg;
@@ -1405,7 +1419,6 @@ static int qla2x00_probe_one(struct pci_dev *pdev)
 	ha->isp_ops.read_nvram		= qla2x00_read_nvram_data;
 	ha->isp_ops.write_nvram		= qla2x00_write_nvram_data;
 	ha->isp_ops.fw_dump		= qla2100_fw_dump;
-	ha->isp_ops.ascii_fw_dump	= qla2100_ascii_fw_dump;
 	ha->isp_ops.read_optrom		= qla2x00_read_optrom_data;
 	ha->isp_ops.write_optrom	= qla2x00_write_optrom_data;
 	if (IS_QLA2100(ha)) {
@@ -1432,7 +1445,6 @@ static int qla2x00_probe_one(struct pci_dev *pdev)
 		ha->isp_ops.pci_config = qla2300_pci_config;
 		ha->isp_ops.intr_handler = qla2300_intr_handler;
 		ha->isp_ops.fw_dump = qla2300_fw_dump;
-		ha->isp_ops.ascii_fw_dump = qla2300_ascii_fw_dump;
 		ha->isp_ops.beacon_on = qla2x00_beacon_on;
 		ha->isp_ops.beacon_off = qla2x00_beacon_off;
 		ha->isp_ops.beacon_blink = qla2x00_beacon_blink;
@@ -1469,7 +1481,6 @@ static int qla2x00_probe_one(struct pci_dev *pdev)
 		ha->isp_ops.read_nvram = qla24xx_read_nvram_data;
 		ha->isp_ops.write_nvram = qla24xx_write_nvram_data;
 		ha->isp_ops.fw_dump = qla24xx_fw_dump;
-		ha->isp_ops.ascii_fw_dump = qla24xx_ascii_fw_dump;
 		ha->isp_ops.read_optrom	= qla24xx_read_optrom_data;
 		ha->isp_ops.write_optrom = qla24xx_write_optrom_data;
 		ha->isp_ops.beacon_on = qla24xx_beacon_on;
@@ -1640,7 +1651,8 @@ probe_out:
 	return ret;
 }
 
-static void qla2x00_remove_one(struct pci_dev *pdev)
+static void __devexit
+qla2x00_remove_one(struct pci_dev *pdev)
 {
 	scsi_qla_host_t *ha;
 
@@ -1678,6 +1690,9 @@ qla2x00_free_device(scsi_qla_host_t *ha)
 		kthread_stop(t);
 	}
 
+	if (ha->eft)
+		qla2x00_trace_control(ha, TC_DISABLE, 0, 0);
+
 	/* Stop currently executing firmware. */
 	qla2x00_stop_firmware(ha);
 
@@ -1899,17 +1914,6 @@ qla2x00_mem_alloc(scsi_qla_host_t *ha)
 		}
 		memset(ha->init_cb, 0, ha->init_cb_size);
 
-		/* Allocate ioctl related memory. */
-		if (qla2x00_alloc_ioctl_mem(ha)) {
-			qla_printk(KERN_WARNING, ha,
-			    "Memory Allocation failed - ioctl_mem\n");
-
-			qla2x00_mem_free(ha);
-			msleep(100);
-
-			continue;
-		}
-
 		if (qla2x00_allocate_sp_pool(ha)) {
 			qla_printk(KERN_WARNING, ha,
 			    "Memory Allocation failed - "
@@ -1972,6 +1976,26 @@ qla2x00_mem_alloc(scsi_qla_host_t *ha)
 				continue;
 			}
 			memset(ha->ct_sns, 0, sizeof(struct ct_sns_pkt));
+
+			if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) {
+				/*
+				 * Get consistent memory allocated for SFP
+				 * block.
+				 */
+				ha->sfp_data = dma_pool_alloc(ha->s_dma_pool,
+				    GFP_KERNEL, &ha->sfp_data_dma);
+				if (ha->sfp_data == NULL) {
+					qla_printk(KERN_WARNING, ha,
+					    "Memory Allocation failed - "
+					    "sfp_data\n");
+
+					qla2x00_mem_free(ha);
+					msleep(100);
+
+					continue;
+				}
+				memset(ha->sfp_data, 0, SFP_BLOCK_SIZE);
+			}
 		}
 
 		/* Done all allocations without any error. */
@@ -2006,12 +2030,16 @@ qla2x00_mem_free(scsi_qla_host_t *ha)
 		return;
 	}
 
-	/* free ioctl memory */
-	qla2x00_free_ioctl_mem(ha);
-
 	/* free sp pool */
 	qla2x00_free_sp_pool(ha);
 
+	if (ha->fw_dump) {
+		if (ha->eft)
+			dma_free_coherent(&ha->pdev->dev,
+			    ntohl(ha->fw_dump->eft_size), ha->eft, ha->eft_dma);
+		vfree(ha->fw_dump);
+	}
+
 	if (ha->sns_cmd)
 		dma_free_coherent(&ha->pdev->dev, sizeof(struct sns_cmd_pkt),
 		    ha->sns_cmd, ha->sns_cmd_dma);
@@ -2020,6 +2048,9 @@ qla2x00_mem_free(scsi_qla_host_t *ha)
 		dma_free_coherent(&ha->pdev->dev, sizeof(struct ct_sns_pkt),
 		    ha->ct_sns, ha->ct_sns_dma);
 
+	if (ha->sfp_data)
+		dma_pool_free(ha->s_dma_pool, ha->sfp_data, ha->sfp_data_dma);
+
 	if (ha->ms_iocb)
 		dma_pool_free(ha->s_dma_pool, ha->ms_iocb, ha->ms_iocb_dma);
 
@@ -2043,6 +2074,8 @@ qla2x00_mem_free(scsi_qla_host_t *ha)
 		    (ha->request_q_length + 1) * sizeof(request_t),
 		    ha->request_ring, ha->request_dma);
 
+	ha->eft = NULL;
+	ha->eft_dma = 0;
 	ha->sns_cmd = NULL;
 	ha->sns_cmd_dma = 0;
 	ha->ct_sns = NULL;
@@ -2071,13 +2104,9 @@ qla2x00_mem_free(scsi_qla_host_t *ha)
 	}
 	INIT_LIST_HEAD(&ha->fcports);
 
-	vfree(ha->fw_dump);
-	vfree(ha->fw_dump_buffer);
-
 	ha->fw_dump = NULL;
 	ha->fw_dumped = 0;
 	ha->fw_dump_reading = 0;
-	ha->fw_dump_buffer = NULL;
 
 	vfree(ha->optrom_buffer);
 }
@@ -2617,40 +2646,16 @@ static struct pci_device_id qla2xxx_pci_tbl[] = {
 };
 MODULE_DEVICE_TABLE(pci, qla2xxx_pci_tbl);
 
-static int __devinit
-qla2xxx_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
-{
-	return qla2x00_probe_one(pdev);
-}
-
-static void __devexit
-qla2xxx_remove_one(struct pci_dev *pdev)
-{
-	qla2x00_remove_one(pdev);
-}
-
 static struct pci_driver qla2xxx_pci_driver = {
 	.name		= QLA2XXX_DRIVER_NAME,
 	.driver		= {
 		.owner		= THIS_MODULE,
 	},
 	.id_table	= qla2xxx_pci_tbl,
-	.probe		= qla2xxx_probe_one,
-	.remove		= __devexit_p(qla2xxx_remove_one),
+	.probe		= qla2x00_probe_one,
+	.remove		= __devexit_p(qla2x00_remove_one),
 };
 
-static inline int
-qla2x00_pci_module_init(void)
-{
-	return pci_module_init(&qla2xxx_pci_driver);
-}
-
-static inline void
-qla2x00_pci_module_exit(void)
-{
-	pci_unregister_driver(&qla2xxx_pci_driver);
-}
-
 /**
  * qla2x00_module_init - Module initialization.
  **/
@@ -2670,16 +2675,16 @@ qla2x00_module_init(void)
 
 	/* Derive version string. */
 	strcpy(qla2x00_version_str, QLA2XXX_VERSION);
-#if DEBUG_QLA2100
-	strcat(qla2x00_version_str, "-debug");
-#endif
+	if (extended_error_logging)
+		strcat(qla2x00_version_str, "-debug");
+
 	qla2xxx_transport_template =
 	    fc_attach_transport(&qla2xxx_transport_functions);
 	if (!qla2xxx_transport_template)
 		return -ENODEV;
 
 	printk(KERN_INFO "QLogic Fibre Channel HBA Driver\n");
-	ret = qla2x00_pci_module_init();
+	ret = pci_register_driver(&qla2xxx_pci_driver);
 	if (ret) {
 		kmem_cache_destroy(srb_cachep);
 		fc_release_transport(qla2xxx_transport_template);
@@ -2693,7 +2698,7 @@ qla2x00_module_init(void)
 static void __exit
 qla2x00_module_exit(void)
 {
-	qla2x00_pci_module_exit();
+	pci_unregister_driver(&qla2xxx_pci_driver);
 	qla2x00_release_firmware();
 	kmem_cache_destroy(srb_cachep);
 	fc_release_transport(qla2xxx_transport_template);

drivers/scsi/qla2xxx/qla_version.h

@@ -7,7 +7,7 @@
 /*
  * Driver version
  */
-#define QLA2XXX_VERSION      "8.01.05-k2"
+#define QLA2XXX_VERSION      "8.01.05-k3"
 
 #define QLA_DRIVER_MAJOR_VER	8
 #define QLA_DRIVER_MINOR_VER	1

drivers/scsi/scsi_devinfo.c

@@ -162,7 +162,7 @@ static struct {
 	{"HITACHI", "DISK-SUBSYSTEM", "*", BLIST_ATTACH_PQ3 | BLIST_SPARSELUN | BLIST_LARGELUN},
 	{"HITACHI", "OPEN-E", "*", BLIST_ATTACH_PQ3 | BLIST_SPARSELUN | BLIST_LARGELUN},
 	{"HP", "A6189A", NULL, BLIST_SPARSELUN | BLIST_LARGELUN},	/* HP VA7400 */
-	{"HP", "OPEN-", "*", BLIST_SPARSELUN | BLIST_LARGELUN}, /* HP XP Arrays */
+	{"HP", "OPEN-", "*", BLIST_REPORTLUN2}, /* HP XP Arrays */
 	{"HP", "NetRAID-4M", NULL, BLIST_FORCELUN},
 	{"HP", "HSV100", NULL, BLIST_REPORTLUN2 | BLIST_NOSTARTONADD},
 	{"HP", "C1557A", NULL, BLIST_FORCELUN},

drivers/scsi/scsi_error.c

@@ -1672,7 +1672,9 @@ int
 scsi_reset_provider(struct scsi_device *dev, int flag)
 {
 	struct scsi_cmnd *scmd = scsi_get_command(dev, GFP_KERNEL);
+	struct Scsi_Host *shost = dev->host;
 	struct request req;
+	unsigned long flags;
 	int rtn;
 
 	scmd->request = &req;
@@ -1699,6 +1701,10 @@ scsi_reset_provider(struct scsi_device *dev, int flag)
 	 */
 	scmd->pid			= 0;
 
+	spin_lock_irqsave(shost->host_lock, flags);
+	shost->tmf_in_progress = 1;
+	spin_unlock_irqrestore(shost->host_lock, flags);
+
 	switch (flag) {
 	case SCSI_TRY_RESET_DEVICE:
 		rtn = scsi_try_bus_device_reset(scmd);
@@ -1717,6 +1723,22 @@ scsi_reset_provider(struct scsi_device *dev, int flag)
 		rtn = FAILED;
 	}
 
+	spin_lock_irqsave(shost->host_lock, flags);
+	shost->tmf_in_progress = 0;
+	spin_unlock_irqrestore(shost->host_lock, flags);
+
+	/*
+	 * be sure to wake up anyone who was sleeping or had their queue
+	 * suspended while we performed the TMF.
+	 */
+	SCSI_LOG_ERROR_RECOVERY(3,
+		printk("%s: waking up host to restart after TMF\n",
+		__FUNCTION__));
+
+	wake_up(&shost->host_wait);
+
+	scsi_run_host_queues(shost);
+
 	scsi_next_command(scmd);
 	return rtn;
 }

drivers/scsi/scsi_lib.c

@@ -855,8 +855,7 @@ static void scsi_release_buffers(struct scsi_cmnd *cmd)
  *		b) We can just use scsi_requeue_command() here.  This would
  *		   be used if we just wanted to retry, for example.
  */
-void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes,
-			unsigned int block_bytes)
+void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
 {
 	int result = cmd->result;
 	int this_count = cmd->bufflen;
@@ -921,87 +920,70 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes,
 	 * Next deal with any sectors which we were able to correctly
 	 * handle.
 	 */
-	if (good_bytes >= 0) {
-		SCSI_LOG_HLCOMPLETE(1, printk("%ld sectors total, %d bytes done.\n",
-					      req->nr_sectors, good_bytes));
-		SCSI_LOG_HLCOMPLETE(1, printk("use_sg is %d\n", cmd->use_sg));
+	SCSI_LOG_HLCOMPLETE(1, printk("%ld sectors total, "
+				      "%d bytes done.\n",
+				      req->nr_sectors, good_bytes));
+	SCSI_LOG_HLCOMPLETE(1, printk("use_sg is %d\n", cmd->use_sg));
 
-		if (clear_errors)
-			req->errors = 0;
-		/*
-		 * If multiple sectors are requested in one buffer, then
-		 * they will have been finished off by the first command.
-		 * If not, then we have a multi-buffer command.
-		 *
-		 * If block_bytes != 0, it means we had a medium error
-		 * of some sort, and that we want to mark some number of
-		 * sectors as not uptodate.  Thus we want to inhibit
-		 * requeueing right here - we will requeue down below
-		 * when we handle the bad sectors.
-		 */
+	if (clear_errors)
+		req->errors = 0;
 
-		/*
-		 * If the command completed without error, then either
-		 * finish off the rest of the command, or start a new one.
-		 */
-		if (scsi_end_request(cmd, 1, good_bytes, result == 0) == NULL)
-			return;
-	}
-	/*
-	 * Now, if we were good little boys and girls, Santa left us a request
-	 * sense buffer.  We can extract information from this, so we
-	 * can choose a block to remap, etc.
+	/* A number of bytes were successfully read.  If there
+	 * are leftovers and there is some kind of error
+	 * (result != 0), retry the rest.
+	 */
+	if (scsi_end_request(cmd, 1, good_bytes, result == 0) == NULL)
+		return;
+
+	/* good_bytes = 0, or (inclusive) there were leftovers and
+	 * result = 0, so scsi_end_request couldn't retry.
 	 */
 	if (sense_valid && !sense_deferred) {
 		switch (sshdr.sense_key) {
 		case UNIT_ATTENTION:
 			if (cmd->device->removable) {
-				/* detected disc change.  set a bit 
+				/* Detected disc change.  Set a bit
 				 * and quietly refuse further access.
 				 */
 				cmd->device->changed = 1;
-				scsi_end_request(cmd, 0,
-						this_count, 1);
+				scsi_end_request(cmd, 0, this_count, 1);
 				return;
 			} else {
-				/*
-				* Must have been a power glitch, or a
-				* bus reset.  Could not have been a
-				* media change, so we just retry the
-				* request and see what happens.  
-				*/
+				/* Must have been a power glitch, or a
+				 * bus reset.  Could not have been a
+				 * media change, so we just retry the
+				 * request and see what happens.
+				 */
 				scsi_requeue_command(q, cmd);
 				return;
 			}
 			break;
 		case ILLEGAL_REQUEST:
-			/*
-		 	* If we had an ILLEGAL REQUEST returned, then we may
-		 	* have performed an unsupported command.  The only
-		 	* thing this should be would be a ten byte read where
-			* only a six byte read was supported.  Also, on a
-			* system where READ CAPACITY failed, we may have read
-			* past the end of the disk.
-		 	*/
+			/* If we had an ILLEGAL REQUEST returned, then
+			 * we may have performed an unsupported
+			 * command.  The only thing this should be
+			 * would be a ten byte read where only a six
+			 * byte read was supported.  Also, on a system
+			 * where READ CAPACITY failed, we may have
+			 * read past the end of the disk.
+			 */
 			if ((cmd->device->use_10_for_rw &&
 			    sshdr.asc == 0x20 && sshdr.ascq == 0x00) &&
 			    (cmd->cmnd[0] == READ_10 ||
 			     cmd->cmnd[0] == WRITE_10)) {
 				cmd->device->use_10_for_rw = 0;
-				/*
-				 * This will cause a retry with a 6-byte
-				 * command.
+				/* This will cause a retry with a
+				 * 6-byte command.
 				 */
 				scsi_requeue_command(q, cmd);
-				result = 0;
+				return;
 			} else {
 				scsi_end_request(cmd, 0, this_count, 1);
 				return;
 			}
 			break;
 		case NOT_READY:
-			/*
-			 * If the device is in the process of becoming
+			/* If the device is in the process of becoming
 			 * ready, or has a temporary blockage, retry.
 			 */
 			if (sshdr.asc == 0x04) {
@@ -1021,7 +1003,7 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes,
 			}
 			if (!(req->flags & REQ_QUIET)) {
 				scmd_printk(KERN_INFO, cmd,
-					   "Device not ready: ");
+					    "Device not ready: ");
 				scsi_print_sense_hdr("", &sshdr);
 			}
 			scsi_end_request(cmd, 0, this_count, 1);
@@ -1029,21 +1011,21 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes,
 		case VOLUME_OVERFLOW:
 			if (!(req->flags & REQ_QUIET)) {
 				scmd_printk(KERN_INFO, cmd,
-					   "Volume overflow, CDB: ");
+					    "Volume overflow, CDB: ");
 				__scsi_print_command(cmd->data_cmnd);
 				scsi_print_sense("", cmd);
 			}
-			scsi_end_request(cmd, 0, block_bytes, 1);
+			/* See SSC3rXX or current. */
+			scsi_end_request(cmd, 0, this_count, 1);
 			return;
 		default:
 			break;
 		}
-	}			/* driver byte != 0 */
+	}
 	if (host_byte(result) == DID_RESET) {
-		/*
-		 * Third party bus reset or reset for error
-		 * recovery reasons.  Just retry the request
-		 * and see what happens.  
+		/* Third party bus reset or reset for error recovery
+		 * reasons.  Just retry the request and see what
+		 * happens.
 		 */
 		scsi_requeue_command(q, cmd);
 		return;
@@ -1051,21 +1033,13 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes,
 	if (result) {
 		if (!(req->flags & REQ_QUIET)) {
 			scmd_printk(KERN_INFO, cmd,
-				   "SCSI error: return code = 0x%x\n", result);
-
+				    "SCSI error: return code = 0x%08x\n",
+				    result);
 			if (driver_byte(result) & DRIVER_SENSE)
 				scsi_print_sense("", cmd);
 		}
-		/*
-		 * Mark a single buffer as not uptodate.  Queue the remainder.
-		 * We sometimes get this cruft in the event that a medium error
-		 * isn't properly reported.
-		 */
-		block_bytes = req->hard_cur_sectors << 9;
-		if (!block_bytes)
-			block_bytes = req->data_len;
-		scsi_end_request(cmd, 0, block_bytes, 1);
 	}
+	scsi_end_request(cmd, 0, this_count, !result);
 }
 EXPORT_SYMBOL(scsi_io_completion);
 
@@ -1169,7 +1143,7 @@ static void scsi_blk_pc_done(struct scsi_cmnd *cmd)
 	 * successfully. Since this is a REQ_BLOCK_PC command the
 	 * caller should check the request's errors value
 	 */
-	scsi_io_completion(cmd, cmd->bufflen, 0);
+	scsi_io_completion(cmd, cmd->bufflen);
 }
 
 static void scsi_setup_blk_pc_cmnd(struct scsi_cmnd *cmd)
@@ -2050,6 +2024,7 @@ scsi_device_set_state(struct scsi_device *sdev, enum scsi_device_state state)
 		switch (oldstate) {
 		case SDEV_CREATED:
 		case SDEV_RUNNING:
+		case SDEV_QUIESCE:
 		case SDEV_OFFLINE:
 		case SDEV_BLOCK:
 			break;
@@ -2060,6 +2035,9 @@ scsi_device_set_state(struct scsi_device *sdev, enum scsi_device_state state)
 
 	case SDEV_DEL:
 		switch (oldstate) {
+		case SDEV_CREATED:
+		case SDEV_RUNNING:
+		case SDEV_OFFLINE:
 		case SDEV_CANCEL:
 			break;
 		default:

drivers/scsi/scsi_priv.h

@@ -116,7 +116,7 @@ extern struct bus_type scsi_bus_type;
  * classes.
  */
 
-#define SCSI_DEVICE_BLOCK_MAX_TIMEOUT	(HZ*60)
+#define SCSI_DEVICE_BLOCK_MAX_TIMEOUT	600	/* units in seconds */
 extern int scsi_internal_device_block(struct scsi_device *sdev);
 extern int scsi_internal_device_unblock(struct scsi_device *sdev);
 

drivers/scsi/scsi_sas_internal.h

@@ -2,7 +2,8 @@
 #define _SCSI_SAS_INTERNAL_H
 
 #define SAS_HOST_ATTRS		0
-#define SAS_PORT_ATTRS		17
+#define SAS_PHY_ATTRS		17
+#define SAS_PORT_ATTRS		1
 #define SAS_RPORT_ATTRS		7
 #define SAS_END_DEV_ATTRS	3
 #define SAS_EXPANDER_ATTRS	7
@@ -13,12 +14,14 @@ struct sas_internal {
 	struct sas_domain_function_template *dft;
 
 	struct class_device_attribute private_host_attrs[SAS_HOST_ATTRS];
-	struct class_device_attribute private_phy_attrs[SAS_PORT_ATTRS];
+	struct class_device_attribute private_phy_attrs[SAS_PHY_ATTRS];
+	struct class_device_attribute private_port_attrs[SAS_PORT_ATTRS];
 	struct class_device_attribute private_rphy_attrs[SAS_RPORT_ATTRS];
 	struct class_device_attribute private_end_dev_attrs[SAS_END_DEV_ATTRS];
 	struct class_device_attribute private_expander_attrs[SAS_EXPANDER_ATTRS];
 
 	struct transport_container phy_attr_cont;
+	struct transport_container port_attr_cont;
 	struct transport_container rphy_attr_cont;
 	struct transport_container end_dev_attr_cont;
 	struct transport_container expander_attr_cont;
@@ -28,7 +31,8 @@ struct sas_internal {
 	 * needed by scsi_sysfs.c
 	 */
 	struct class_device_attribute *host_attrs[SAS_HOST_ATTRS + 1];
-	struct class_device_attribute *phy_attrs[SAS_PORT_ATTRS + 1];
+	struct class_device_attribute *phy_attrs[SAS_PHY_ATTRS + 1];
+	struct class_device_attribute *port_attrs[SAS_PORT_ATTRS + 1];
 	struct class_device_attribute *rphy_attrs[SAS_RPORT_ATTRS + 1];
 	struct class_device_attribute *end_dev_attrs[SAS_END_DEV_ATTRS + 1];
 	struct class_device_attribute *expander_attrs[SAS_EXPANDER_ATTRS + 1];

drivers/scsi/scsi_scan.c

@@ -809,6 +809,7 @@ static int scsi_add_lun(struct scsi_device *sdev, char *inq_result, int *bflags)
 
 static inline void scsi_destroy_sdev(struct scsi_device *sdev)
 {
+	scsi_device_set_state(sdev, SDEV_DEL);
 	if (sdev->host->hostt->slave_destroy)
 		sdev->host->hostt->slave_destroy(sdev);
 	transport_destroy_device(&sdev->sdev_gendev);

drivers/scsi/scsi_transport_fc.c

@@ -368,7 +368,7 @@ static DECLARE_TRANSPORT_CLASS(fc_rport_class,
  *   should insulate the loss of a remote port.
  *   The maximum will be capped by the value of SCSI_DEVICE_BLOCK_MAX_TIMEOUT.
  */
-static unsigned int fc_dev_loss_tmo = SCSI_DEVICE_BLOCK_MAX_TIMEOUT;
+static unsigned int fc_dev_loss_tmo = 60;		/* seconds */
 
 module_param_named(dev_loss_tmo, fc_dev_loss_tmo, int, S_IRUGO|S_IWUSR);
 MODULE_PARM_DESC(dev_loss_tmo,
@@ -1284,7 +1284,9 @@ EXPORT_SYMBOL(fc_release_transport);
  * @work:	Work to queue for execution.
  *
  * Return value:
- * 	0 on success / != 0 for error
+ * 	1 - work queued for execution
+ *	0 - work is already queued
+ *	-EINVAL - work queue doesn't exist
  **/
 static int
 fc_queue_work(struct Scsi_Host *shost, struct work_struct *work)
@@ -1434,8 +1436,6 @@ fc_starget_delete(void *data)
 	struct Scsi_Host *shost = rport_to_shost(rport);
 	unsigned long flags;
 
-	scsi_target_unblock(&rport->dev);
-
 	spin_lock_irqsave(shost->host_lock, flags);
 	if (rport->flags & FC_RPORT_DEVLOSS_PENDING) {
 		spin_unlock_irqrestore(shost->host_lock, flags);
@@ -1476,7 +1476,8 @@ fc_rport_final_delete(void *data)
 	transport_remove_device(dev);
 	device_del(dev);
 	transport_destroy_device(dev);
-	put_device(&shost->shost_gendev);
+	put_device(&shost->shost_gendev);	/* for fc_host->rport list */
+	put_device(dev);			/* for self-reference */
 }
 
 
@@ -1537,13 +1538,13 @@ fc_rport_create(struct Scsi_Host *shost, int channel,
 	else
 		rport->scsi_target_id = -1;
 	list_add_tail(&rport->peers, &fc_host->rports);
-	get_device(&shost->shost_gendev);
+	get_device(&shost->shost_gendev);	/* for fc_host->rport list */
 
 	spin_unlock_irqrestore(shost->host_lock, flags);
 
 	dev = &rport->dev;
-	device_initialize(dev);
-	dev->parent = get_device(&shost->shost_gendev);
+	device_initialize(dev);			/* takes self reference */
+	dev->parent = get_device(&shost->shost_gendev); /* parent reference */
 	dev->release = fc_rport_dev_release;
 	sprintf(dev->bus_id, "rport-%d:%d-%d",
 		shost->host_no, channel, rport->number);
@@ -1567,10 +1568,9 @@ fc_rport_create(struct Scsi_Host *shost, int channel,
 
 delete_rport:
 	transport_destroy_device(dev);
-	put_device(dev->parent);
 	spin_lock_irqsave(shost->host_lock, flags);
 	list_del(&rport->peers);
-	put_device(&shost->shost_gendev);
+	put_device(&shost->shost_gendev);	/* for fc_host->rport list */
 	spin_unlock_irqrestore(shost->host_lock, flags);
 	put_device(dev->parent);
 	kfree(rport);
@@ -1707,6 +1707,8 @@ fc_remote_port_add(struct Scsi_Host *shost, int channel,
 
 				spin_unlock_irqrestore(shost->host_lock, flags);
 
+				scsi_target_unblock(&rport->dev);
+
 				return rport;
 			}
 		}
@@ -1762,9 +1764,10 @@ fc_remote_port_add(struct Scsi_Host *shost, int channel,
 				/* initiate a scan of the target */
 				rport->flags |= FC_RPORT_SCAN_PENDING;
 				scsi_queue_work(shost, &rport->scan_work);
-			}
-
-			spin_unlock_irqrestore(shost->host_lock, flags);
+				spin_unlock_irqrestore(shost->host_lock, flags);
+				scsi_target_unblock(&rport->dev);
+			} else
+				spin_unlock_irqrestore(shost->host_lock, flags);
 
 			return rport;
 		}
@@ -1938,6 +1941,7 @@ fc_remote_port_rolechg(struct fc_rport  *rport, u32 roles)
 		rport->flags |= FC_RPORT_SCAN_PENDING;
 		scsi_queue_work(shost, &rport->scan_work);
 		spin_unlock_irqrestore(shost->host_lock, flags);
+		scsi_target_unblock(&rport->dev);
 	}
 }
 EXPORT_SYMBOL(fc_remote_port_rolechg);
@@ -1970,8 +1974,9 @@ fc_timeout_deleted_rport(void  *data)
 		dev_printk(KERN_ERR, &rport->dev,
 			"blocked FC remote port time out: no longer"
 			" a FCP target, removing starget\n");
-		fc_queue_work(shost, &rport->stgt_delete_work);
 		spin_unlock_irqrestore(shost->host_lock, flags);
+		scsi_target_unblock(&rport->dev);
+		fc_queue_work(shost, &rport->stgt_delete_work);
 		return;
 	}
 
@@ -2035,17 +2040,15 @@ fc_timeout_deleted_rport(void  *data)
 	 * went away and didn't come back - we'll remove
 	 * all attached scsi devices.
 	 */
-	fc_queue_work(shost, &rport->stgt_delete_work);
-
 	spin_unlock_irqrestore(shost->host_lock, flags);
+
+	scsi_target_unblock(&rport->dev);
+	fc_queue_work(shost, &rport->stgt_delete_work);
 }
 
 /**
  * fc_scsi_scan_rport - called to perform a scsi scan on a remote port.
  *
- * Will unblock the target (in case it went away and has now come back),
- * then invoke a scan.
- *
  * @data:	remote port to be scanned.
  **/
 static void
@@ -2057,7 +2060,6 @@ fc_scsi_scan_rport(void *data)
 
 	if ((rport->port_state == FC_PORTSTATE_ONLINE) &&
 	    (rport->roles & FC_RPORT_ROLE_FCP_TARGET)) {
-		scsi_target_unblock(&rport->dev);
 		scsi_scan_target(&rport->dev, rport->channel,
 			rport->scsi_target_id, SCAN_WILD_CARD, 1);
 	}

drivers/scsi/scsi_transport_iscsi.c

@@ -228,14 +228,11 @@ static struct iscsi_cls_conn *iscsi_conn_lookup(uint32_t sid, uint32_t cid)
 static void iscsi_session_release(struct device *dev)
 {
 	struct iscsi_cls_session *session = iscsi_dev_to_session(dev);
-	struct iscsi_transport *transport = session->transport;
 	struct Scsi_Host *shost;
 
 	shost = iscsi_session_to_shost(session);
 	scsi_host_put(shost);
-	kfree(session->targetname);
 	kfree(session);
-	module_put(transport->owner);
 }
 
 static int iscsi_is_session_dev(const struct device *dev)
@@ -251,10 +248,9 @@ static int iscsi_user_scan(struct Scsi_Host *shost, uint channel,
 
 	mutex_lock(&ihost->mutex);
 	list_for_each_entry(session, &ihost->sessions, host_list) {
-		if ((channel == SCAN_WILD_CARD ||
-		     channel == session->channel) &&
+		if ((channel == SCAN_WILD_CARD || channel == 0) &&
 		    (id == SCAN_WILD_CARD || id == session->target_id))
-			scsi_scan_target(&session->dev, session->channel,
+			scsi_scan_target(&session->dev, 0,
 					 session->target_id, lun, 1);
 	}
 	mutex_unlock(&ihost->mutex);
@@ -291,80 +287,92 @@ void iscsi_block_session(struct iscsi_cls_session *session)
 }
 EXPORT_SYMBOL_GPL(iscsi_block_session);
 
-/**
- * iscsi_create_session - create iscsi class session
- * @shost: scsi host
- * @transport: iscsi transport
- *
- * This can be called from a LLD or iscsi_transport.
- **/
 struct iscsi_cls_session *
-iscsi_create_session(struct Scsi_Host *shost,
-		     struct iscsi_transport *transport, int channel)
+iscsi_alloc_session(struct Scsi_Host *shost,
+		    struct iscsi_transport *transport)
 {
-	struct iscsi_host *ihost;
 	struct iscsi_cls_session *session;
-	int err;
-
-	if (!try_module_get(transport->owner))
-		return NULL;
 
 	session = kzalloc(sizeof(*session) + transport->sessiondata_size,
 			  GFP_KERNEL);
 	if (!session)
-		goto module_put;
+		return NULL;
+
 	session->transport = transport;
 	session->recovery_tmo = 120;
 	INIT_WORK(&session->recovery_work, session_recovery_timedout, session);
 	INIT_LIST_HEAD(&session->host_list);
 	INIT_LIST_HEAD(&session->sess_list);
 
+	/* this is released in the dev's release function */
+	scsi_host_get(shost);
+	session->dev.parent = &shost->shost_gendev;
+	session->dev.release = iscsi_session_release;
+	device_initialize(&session->dev);
 	if (transport->sessiondata_size)
 		session->dd_data = &session[1];
+	return session;
+}
+EXPORT_SYMBOL_GPL(iscsi_alloc_session);
 
-	/* this is released in the dev's release function */
-	scsi_host_get(shost);
-	ihost = shost->shost_data;
+int iscsi_add_session(struct iscsi_cls_session *session, unsigned int target_id)
+{
+	struct Scsi_Host *shost = iscsi_session_to_shost(session);
+	struct iscsi_host *ihost;
+	int err;
 
+	ihost = shost->shost_data;
 	session->sid = iscsi_session_nr++;
-	session->channel = channel;
-	session->target_id = ihost->next_target_id++;
+	session->target_id = target_id;
 
 	snprintf(session->dev.bus_id, BUS_ID_SIZE, "session%u",
 		 session->sid);
-	session->dev.parent = &shost->shost_gendev;
-	session->dev.release = iscsi_session_release;
-	err = device_register(&session->dev);
+	err = device_add(&session->dev);
 	if (err) {
 		dev_printk(KERN_ERR, &session->dev, "iscsi: could not "
 			   "register session's dev\n");
-		goto free_session;
+		goto release_host;
 	}
 	transport_register_device(&session->dev);
 
 	mutex_lock(&ihost->mutex);
 	list_add(&session->host_list, &ihost->sessions);
 	mutex_unlock(&ihost->mutex);
+	return 0;
 
-	return session;
-
-free_session:
-	kfree(session);
-module_put:
-	module_put(transport->owner);
-	return NULL;
+release_host:
+	scsi_host_put(shost);
+	return err;
 }
-
-EXPORT_SYMBOL_GPL(iscsi_create_session);
+EXPORT_SYMBOL_GPL(iscsi_add_session);
 
 /**
- * iscsi_destroy_session - destroy iscsi session
- * @session: iscsi_session
+ * iscsi_create_session - create iscsi class session
+ * @shost: scsi host
+ * @transport: iscsi transport
  *
- * Can be called by a LLD or iscsi_transport. There must not be
- * any running connections.
+ * This can be called from a LLD or iscsi_transport.
  **/
-int iscsi_destroy_session(struct iscsi_cls_session *session)
+struct iscsi_cls_session *
+iscsi_create_session(struct Scsi_Host *shost,
+		     struct iscsi_transport *transport,
+		     unsigned int target_id)
+{
+	struct iscsi_cls_session *session;
+
+	session = iscsi_alloc_session(shost, transport);
+	if (!session)
+		return NULL;
+
+	if (iscsi_add_session(session, target_id)) {
+		iscsi_free_session(session);
+		return NULL;
+	}
+	return session;
+}
+EXPORT_SYMBOL_GPL(iscsi_create_session);
+
+void iscsi_remove_session(struct iscsi_cls_session *session)
 {
 	struct Scsi_Host *shost = iscsi_session_to_shost(session);
 	struct iscsi_host *ihost = shost->shost_data;
@@ -376,19 +384,88 @@ int iscsi_destroy_session(struct iscsi_cls_session *session)
 	list_del(&session->host_list);
 	mutex_unlock(&ihost->mutex);
 
+	scsi_remove_target(&session->dev);
+
 	transport_unregister_device(&session->dev);
-	device_unregister(&session->dev);
-	return 0;
+	device_del(&session->dev);
+}
+EXPORT_SYMBOL_GPL(iscsi_remove_session);
+
+void iscsi_free_session(struct iscsi_cls_session *session)
+{
+	put_device(&session->dev);
 }
 
+EXPORT_SYMBOL_GPL(iscsi_free_session);
+
+/**
+ * iscsi_destroy_session - destroy iscsi session
+ * @session: iscsi_session
+ *
+ * Can be called by a LLD or iscsi_transport. There must not be
+ * any running connections.
+ **/
+int iscsi_destroy_session(struct iscsi_cls_session *session)
+{
+	iscsi_remove_session(session);
+	iscsi_free_session(session);
+	return 0;
+}
 EXPORT_SYMBOL_GPL(iscsi_destroy_session);
 
+static void mempool_zone_destroy(struct mempool_zone *zp)
+{
+	mempool_destroy(zp->pool);
+	kfree(zp);
+}
+
+static void*
+mempool_zone_alloc_skb(gfp_t gfp_mask, void *pool_data)
+{
+	struct mempool_zone *zone = pool_data;
+
+	return alloc_skb(zone->size, gfp_mask);
+}
+
+static void
+mempool_zone_free_skb(void *element, void *pool_data)
+{
+	kfree_skb(element);
+}
+
+static struct mempool_zone *
+mempool_zone_init(unsigned max, unsigned size, unsigned hiwat)
+{
+	struct mempool_zone *zp;
+
+	zp = kzalloc(sizeof(*zp), GFP_KERNEL);
+	if (!zp)
+		return NULL;
+
+	zp->size = size;
+	zp->hiwat = hiwat;
+	INIT_LIST_HEAD(&zp->freequeue);
+	spin_lock_init(&zp->freelock);
+	atomic_set(&zp->allocated, 0);
+
+	zp->pool = mempool_create(max, mempool_zone_alloc_skb,
+				  mempool_zone_free_skb, zp);
+	if (!zp->pool) {
+		kfree(zp);
+		return NULL;
+	}
+
+	return zp;
+}
+
 static void iscsi_conn_release(struct device *dev)
 {
 	struct iscsi_cls_conn *conn = iscsi_dev_to_conn(dev);
 	struct device *parent = conn->dev.parent;
 
-	kfree(conn->persistent_address);
+	mempool_zone_destroy(conn->z_pdu);
+	mempool_zone_destroy(conn->z_error);
+
 	kfree(conn);
 	put_device(parent);
 }
@@ -398,6 +475,31 @@ static int iscsi_is_conn_dev(const struct device *dev)
 	return dev->release == iscsi_conn_release;
 }
 
+static int iscsi_create_event_pools(struct iscsi_cls_conn *conn)
+{
+	conn->z_pdu = mempool_zone_init(Z_MAX_PDU,
+			NLMSG_SPACE(sizeof(struct iscsi_uevent) +
+				    sizeof(struct iscsi_hdr) +
+				    DEFAULT_MAX_RECV_DATA_SEGMENT_LENGTH),
+			Z_HIWAT_PDU);
+	if (!conn->z_pdu) {
+		dev_printk(KERN_ERR, &conn->dev, "iscsi: can not allocate "
+			   "pdu zone for new conn\n");
+		return -ENOMEM;
+	}
+
+	conn->z_error = mempool_zone_init(Z_MAX_ERROR,
+			NLMSG_SPACE(sizeof(struct iscsi_uevent)),
+			Z_HIWAT_ERROR);
+	if (!conn->z_error) {
+		dev_printk(KERN_ERR, &conn->dev, "iscsi: can not allocate "
+			   "error zone for new conn\n");
+		mempool_zone_destroy(conn->z_pdu);
+		return -ENOMEM;
+	}
+	return 0;
+}
+
 /**
  * iscsi_create_conn - create iscsi class connection
  * @session: iscsi cls session
@@ -430,9 +532,12 @@ iscsi_create_conn(struct iscsi_cls_session *session, uint32_t cid)
 	conn->transport = transport;
 	conn->cid = cid;
 
+	if (iscsi_create_event_pools(conn))
+		goto free_conn;
+
 	/* this is released in the dev's release function */
 	if (!get_device(&session->dev))
-		goto free_conn;
+		goto free_conn_pools;
 
 	snprintf(conn->dev.bus_id, BUS_ID_SIZE, "connection%d:%u",
 		 session->sid, cid);
@@ -449,6 +554,8 @@ iscsi_create_conn(struct iscsi_cls_session *session, uint32_t cid)
 
 release_parent_ref:
 	put_device(&session->dev);
+free_conn_pools:
+
 free_conn:
 	kfree(conn);
 	return NULL;
@@ -496,20 +603,6 @@ static inline struct list_head *skb_to_lh(struct sk_buff *skb)
 	return (struct list_head *)&skb->cb;
 }
 
-static void*
-mempool_zone_alloc_skb(gfp_t gfp_mask, void *pool_data)
-{
-	struct mempool_zone *zone = pool_data;
-
-	return alloc_skb(zone->size, gfp_mask);
-}
-
-static void
-mempool_zone_free_skb(void *element, void *pool_data)
-{
-	kfree_skb(element);
-}
-
 static void
 mempool_zone_complete(struct mempool_zone *zone)
 {
@@ -529,37 +622,6 @@ mempool_zone_complete(struct mempool_zone *zone)
 	spin_unlock_irqrestore(&zone->freelock, flags);
 }
 
-static struct mempool_zone *
-mempool_zone_init(unsigned max, unsigned size, unsigned hiwat)
-{
-	struct mempool_zone *zp;
-
-	zp = kzalloc(sizeof(*zp), GFP_KERNEL);
-	if (!zp)
-		return NULL;
-
-	zp->size = size;
-	zp->hiwat = hiwat;
-	INIT_LIST_HEAD(&zp->freequeue);
-	spin_lock_init(&zp->freelock);
-	atomic_set(&zp->allocated, 0);
-
-	zp->pool = mempool_create(max, mempool_zone_alloc_skb,
-				  mempool_zone_free_skb, zp);
-	if (!zp->pool) {
-		kfree(zp);
-		return NULL;
-	}
-
-	return zp;
-}
-
-static void mempool_zone_destroy(struct mempool_zone *zp)
-{
-	mempool_destroy(zp->pool);
-	kfree(zp);
-}
-
 static struct sk_buff*
 mempool_zone_get_skb(struct mempool_zone *zone)
 {
@@ -571,6 +633,27 @@ mempool_zone_get_skb(struct mempool_zone *zone)
 	return skb;
 }
 
+static int
+iscsi_broadcast_skb(struct mempool_zone *zone, struct sk_buff *skb)
+{
+	unsigned long flags;
+	int rc;
+
+	skb_get(skb);
+	rc = netlink_broadcast(nls, skb, 0, 1, GFP_KERNEL);
+	if (rc < 0) {
+		mempool_free(skb, zone->pool);
+		printk(KERN_ERR "iscsi: can not broadcast skb (%d)\n", rc);
+		return rc;
+	}
+
+	spin_lock_irqsave(&zone->freelock, flags);
+	INIT_LIST_HEAD(skb_to_lh(skb));
+	list_add(skb_to_lh(skb), &zone->freequeue);
+	spin_unlock_irqrestore(&zone->freelock, flags);
+	return 0;
+}
+
 static int
 iscsi_unicast_skb(struct mempool_zone *zone, struct sk_buff *skb, int pid)
 {
@@ -666,7 +749,7 @@ void iscsi_conn_error(struct iscsi_cls_conn *conn, enum iscsi_err error)
 	ev->r.connerror.cid = conn->cid;
 	ev->r.connerror.sid = iscsi_conn_get_sid(conn);
 
-	iscsi_unicast_skb(conn->z_error, skb, priv->daemon_pid);
+	iscsi_broadcast_skb(conn->z_error, skb);
 
 	dev_printk(KERN_INFO, &conn->dev, "iscsi: detected conn error (%d)\n",
 		   error);
@@ -767,6 +850,131 @@ iscsi_if_get_stats(struct iscsi_transport *transport, struct nlmsghdr *nlh)
 	return err;
 }
 
+/**
+ * iscsi_if_destroy_session_done - send session destr. completion event
+ * @conn: last connection for session
+ *
+ * This is called by HW iscsi LLDs to notify userpsace that its HW has
+ * removed a session.
+ **/
+int iscsi_if_destroy_session_done(struct iscsi_cls_conn *conn)
+{
+	struct iscsi_internal *priv;
+	struct iscsi_cls_session *session;
+	struct Scsi_Host *shost;
+	struct iscsi_uevent *ev;
+	struct sk_buff  *skb;
+	struct nlmsghdr *nlh;
+	unsigned long flags;
+	int rc, len = NLMSG_SPACE(sizeof(*ev));
+
+	priv = iscsi_if_transport_lookup(conn->transport);
+	if (!priv)
+		return -EINVAL;
+
+	session = iscsi_dev_to_session(conn->dev.parent);
+	shost = iscsi_session_to_shost(session);
+
+	mempool_zone_complete(conn->z_pdu);
+
+	skb = mempool_zone_get_skb(conn->z_pdu);
+	if (!skb) {
+		dev_printk(KERN_ERR, &conn->dev, "Cannot notify userspace of "
+			  "session creation event\n");
+		return -ENOMEM;
+	}
+
+	nlh = __nlmsg_put(skb, priv->daemon_pid, 0, 0, (len - sizeof(*nlh)), 0);
+	ev = NLMSG_DATA(nlh);
+	ev->transport_handle = iscsi_handle(conn->transport);
+	ev->type = ISCSI_KEVENT_DESTROY_SESSION;
+	ev->r.d_session.host_no = shost->host_no;
+	ev->r.d_session.sid = session->sid;
+
+	/*
+	 * this will occur if the daemon is not up, so we just warn
+	 * the user and when the daemon is restarted it will handle it
+	 */
+	rc = iscsi_broadcast_skb(conn->z_pdu, skb);
+	if (rc < 0)
+		dev_printk(KERN_ERR, &conn->dev, "Cannot notify userspace of "
+			  "session destruction event. Check iscsi daemon\n");
+
+	spin_lock_irqsave(&sesslock, flags);
+	list_del(&session->sess_list);
+	spin_unlock_irqrestore(&sesslock, flags);
+
+	spin_lock_irqsave(&connlock, flags);
+	conn->active = 0;
+	list_del(&conn->conn_list);
+	spin_unlock_irqrestore(&connlock, flags);
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(iscsi_if_destroy_session_done);
+
+/**
+ * iscsi_if_create_session_done - send session creation completion event
+ * @conn: leading connection for session
+ *
+ * This is called by HW iscsi LLDs to notify userpsace that its HW has
+ * created a session or a existing session is back in the logged in state.
+ **/
+int iscsi_if_create_session_done(struct iscsi_cls_conn *conn)
+{
+	struct iscsi_internal *priv;
+	struct iscsi_cls_session *session;
+	struct Scsi_Host *shost;
+	struct iscsi_uevent *ev;
+	struct sk_buff  *skb;
+	struct nlmsghdr *nlh;
+	unsigned long flags;
+	int rc, len = NLMSG_SPACE(sizeof(*ev));
+
+	priv = iscsi_if_transport_lookup(conn->transport);
+	if (!priv)
+		return -EINVAL;
+
+	session = iscsi_dev_to_session(conn->dev.parent);
+	shost = iscsi_session_to_shost(session);
+
+	mempool_zone_complete(conn->z_pdu);
+
+	skb = mempool_zone_get_skb(conn->z_pdu);
+	if (!skb) {
+		dev_printk(KERN_ERR, &conn->dev, "Cannot notify userspace of "
+			  "session creation event\n");
+		return -ENOMEM;
+	}
+
+	nlh = __nlmsg_put(skb, priv->daemon_pid, 0, 0, (len - sizeof(*nlh)), 0);
+	ev = NLMSG_DATA(nlh);
+	ev->transport_handle = iscsi_handle(conn->transport);
+	ev->type = ISCSI_UEVENT_CREATE_SESSION;
+	ev->r.c_session_ret.host_no = shost->host_no;
+	ev->r.c_session_ret.sid = session->sid;
+
+	/*
+	 * this will occur if the daemon is not up, so we just warn
+	 * the user and when the daemon is restarted it will handle it
+	 */
+	rc = iscsi_broadcast_skb(conn->z_pdu, skb);
+	if (rc < 0)
+		dev_printk(KERN_ERR, &conn->dev, "Cannot notify userspace of "
+			  "session creation event. Check iscsi daemon\n");
+
+	spin_lock_irqsave(&sesslock, flags);
+	list_add(&session->sess_list, &sesslist);
+	spin_unlock_irqrestore(&sesslock, flags);
+
+	spin_lock_irqsave(&connlock, flags);
+	list_add(&conn->conn_list, &connlist);
+	conn->active = 1;
+	spin_unlock_irqrestore(&connlock, flags);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(iscsi_if_create_session_done);
+
 static int
 iscsi_if_create_session(struct iscsi_internal *priv, struct iscsi_uevent *ev)
 {
@@ -812,26 +1020,6 @@ iscsi_if_create_conn(struct iscsi_transport *transport, struct iscsi_uevent *ev)
 		return -ENOMEM;
 	}
 
-	conn->z_pdu = mempool_zone_init(Z_MAX_PDU,
-			NLMSG_SPACE(sizeof(struct iscsi_uevent) +
-				    sizeof(struct iscsi_hdr) +
-				    DEFAULT_MAX_RECV_DATA_SEGMENT_LENGTH),
-			Z_HIWAT_PDU);
-	if (!conn->z_pdu) {
-		dev_printk(KERN_ERR, &conn->dev, "iscsi: can not allocate "
-			   "pdu zone for new conn\n");
-		goto destroy_conn;
-	}
-
-	conn->z_error = mempool_zone_init(Z_MAX_ERROR,
-			NLMSG_SPACE(sizeof(struct iscsi_uevent)),
-			Z_HIWAT_ERROR);
-	if (!conn->z_error) {
-		dev_printk(KERN_ERR, &conn->dev, "iscsi: can not allocate "
-			   "error zone for new conn\n");
-		goto free_pdu_pool;
-	}
-
 	ev->r.c_conn_ret.sid = session->sid;
 	ev->r.c_conn_ret.cid = conn->cid;
 
@@ -841,13 +1029,6 @@ iscsi_if_create_conn(struct iscsi_transport *transport, struct iscsi_uevent *ev)
 	spin_unlock_irqrestore(&connlock, flags);
 
 	return 0;
-
-free_pdu_pool:
-	mempool_zone_destroy(conn->z_pdu);
-destroy_conn:
-	if (transport->destroy_conn)
-		transport->destroy_conn(conn->dd_data);
-	return -ENOMEM;
 }
 
 static int
@@ -855,7 +1036,6 @@ iscsi_if_destroy_conn(struct iscsi_transport *transport, struct iscsi_uevent *ev
 {
 	unsigned long flags;
 	struct iscsi_cls_conn *conn;
-	struct mempool_zone *z_error, *z_pdu;
 
 	conn = iscsi_conn_lookup(ev->u.d_conn.sid, ev->u.d_conn.cid);
 	if (!conn)
@@ -865,35 +1045,18 @@ iscsi_if_destroy_conn(struct iscsi_transport *transport, struct iscsi_uevent *ev
 	list_del(&conn->conn_list);
 	spin_unlock_irqrestore(&connlock, flags);
 
-	z_pdu = conn->z_pdu;
-	z_error = conn->z_error;
-
 	if (transport->destroy_conn)
 		transport->destroy_conn(conn);
-
-	mempool_zone_destroy(z_pdu);
-	mempool_zone_destroy(z_error);
-
 	return 0;
 }
 
-static void
-iscsi_copy_param(struct iscsi_uevent *ev, uint32_t *value, char *data)
-{
-	if (ev->u.set_param.len != sizeof(uint32_t))
-		BUG();
-	memcpy(value, data, min_t(uint32_t, sizeof(uint32_t),
-		ev->u.set_param.len));
-}
-
 static int
 iscsi_set_param(struct iscsi_transport *transport, struct iscsi_uevent *ev)
 {
 	char *data = (char*)ev + sizeof(*ev);
 	struct iscsi_cls_conn *conn;
 	struct iscsi_cls_session *session;
-	int err = 0;
-	uint32_t value = 0;
+	int err = 0, value = 0;
 
 	session = iscsi_session_lookup(ev->u.set_param.sid);
 	conn = iscsi_conn_lookup(ev->u.set_param.sid, ev->u.set_param.cid);
@@ -902,42 +1065,13 @@ iscsi_set_param(struct iscsi_transport *transport, struct iscsi_uevent *ev)
 
 	switch (ev->u.set_param.param) {
 	case ISCSI_PARAM_SESS_RECOVERY_TMO:
-		iscsi_copy_param(ev, &value, data);
+		sscanf(data, "%d", &value);
 		if (value != 0)
 			session->recovery_tmo = value;
 		break;
-	case ISCSI_PARAM_TARGET_NAME:
-		/* this should not change between logins */
-		if (session->targetname)
-			return 0;
-
-		session->targetname = kstrdup(data, GFP_KERNEL);
-		if (!session->targetname)
-			return -ENOMEM;
-		break;
-	case ISCSI_PARAM_TPGT:
-		iscsi_copy_param(ev, &value, data);
-		session->tpgt = value;
-		break;
-	case ISCSI_PARAM_PERSISTENT_PORT:
-		iscsi_copy_param(ev, &value, data);
-		conn->persistent_port = value;
-		break;
-	case ISCSI_PARAM_PERSISTENT_ADDRESS:
-		/*
-		 * this is the address returned in discovery so it should
-		 * not change between logins.
-		 */
-		if (conn->persistent_address)
-			return 0;
-
-		conn->persistent_address = kstrdup(data, GFP_KERNEL);
-		if (!conn->persistent_address)
-			return -ENOMEM;
-		break;
 	default:
-		iscsi_copy_param(ev, &value, data);
-		err = transport->set_param(conn, ev->u.set_param.param, value);
+		err = transport->set_param(conn, ev->u.set_param.param,
+					   data, ev->u.set_param.len);
 	}
 
 	return err;
@@ -977,6 +1111,21 @@ iscsi_if_transport_ep(struct iscsi_transport *transport,
 	return rc;
 }
 
+static int
+iscsi_tgt_dscvr(struct iscsi_transport *transport,
+		struct iscsi_uevent *ev)
+{
+	struct sockaddr *dst_addr;
+
+	if (!transport->tgt_dscvr)
+		return -EINVAL;
+
+	dst_addr = (struct sockaddr *)((char*)ev + sizeof(*ev));
+	return transport->tgt_dscvr(ev->u.tgt_dscvr.type,
+				    ev->u.tgt_dscvr.host_no,
+				    ev->u.tgt_dscvr.enable, dst_addr);
+}
+
 static int
 iscsi_if_recv_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
 {
@@ -1065,6 +1214,9 @@ iscsi_if_recv_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
 	case ISCSI_UEVENT_TRANSPORT_EP_DISCONNECT:
 		err = iscsi_if_transport_ep(transport, ev, nlh->nlmsg_type);
 		break;
+	case ISCSI_UEVENT_TGT_DSCVR:
+		err = iscsi_tgt_dscvr(transport, ev);
+		break;
 	default:
 		err = -EINVAL;
 		break;
@@ -1147,49 +1299,31 @@ struct class_device_attribute class_device_attr_##_prefix##_##_name =	\
 /*
  * iSCSI connection attrs
  */
-#define iscsi_conn_int_attr_show(param, format)				\
-static ssize_t								\
-show_conn_int_param_##param(struct class_device *cdev, char *buf)	\
-{									\
-	uint32_t value = 0;						\
-	struct iscsi_cls_conn *conn = iscsi_cdev_to_conn(cdev);		\
-	struct iscsi_transport *t = conn->transport;			\
-									\
-	t->get_conn_param(conn, param, &value);				\
-	return snprintf(buf, 20, format"\n", value);			\
-}
-
-#define iscsi_conn_int_attr(field, param, format)			\
-	iscsi_conn_int_attr_show(param, format)				\
-static ISCSI_CLASS_ATTR(conn, field, S_IRUGO, show_conn_int_param_##param, \
-			NULL);
-
-iscsi_conn_int_attr(max_recv_dlength, ISCSI_PARAM_MAX_RECV_DLENGTH, "%u");
-iscsi_conn_int_attr(max_xmit_dlength, ISCSI_PARAM_MAX_XMIT_DLENGTH, "%u");
-iscsi_conn_int_attr(header_digest, ISCSI_PARAM_HDRDGST_EN, "%d");
-iscsi_conn_int_attr(data_digest, ISCSI_PARAM_DATADGST_EN, "%d");
-iscsi_conn_int_attr(ifmarker, ISCSI_PARAM_IFMARKER_EN, "%d");
-iscsi_conn_int_attr(ofmarker, ISCSI_PARAM_OFMARKER_EN, "%d");
-iscsi_conn_int_attr(persistent_port, ISCSI_PARAM_PERSISTENT_PORT, "%d");
-iscsi_conn_int_attr(port, ISCSI_PARAM_CONN_PORT, "%d");
-iscsi_conn_int_attr(exp_statsn, ISCSI_PARAM_EXP_STATSN, "%u");
-
-#define iscsi_conn_str_attr_show(param)					\
+#define iscsi_conn_attr_show(param)					\
 static ssize_t								\
-show_conn_str_param_##param(struct class_device *cdev, char *buf)	\
+show_conn_param_##param(struct class_device *cdev, char *buf)		\
 {									\
 	struct iscsi_cls_conn *conn = iscsi_cdev_to_conn(cdev);		\
 	struct iscsi_transport *t = conn->transport;			\
-	return t->get_conn_str_param(conn, param, buf);			\
+	return t->get_conn_param(conn, param, buf);			\
 }
 
-#define iscsi_conn_str_attr(field, param)				\
-	iscsi_conn_str_attr_show(param)					\
-static ISCSI_CLASS_ATTR(conn, field, S_IRUGO, show_conn_str_param_##param, \
+#define iscsi_conn_attr(field, param)					\
+	iscsi_conn_attr_show(param)					\
+static ISCSI_CLASS_ATTR(conn, field, S_IRUGO, show_conn_param_##param,	\
 			NULL);
 
-iscsi_conn_str_attr(persistent_address, ISCSI_PARAM_PERSISTENT_ADDRESS);
-iscsi_conn_str_attr(address, ISCSI_PARAM_CONN_ADDRESS);
+iscsi_conn_attr(max_recv_dlength, ISCSI_PARAM_MAX_RECV_DLENGTH);
+iscsi_conn_attr(max_xmit_dlength, ISCSI_PARAM_MAX_XMIT_DLENGTH);
+iscsi_conn_attr(header_digest, ISCSI_PARAM_HDRDGST_EN);
+iscsi_conn_attr(data_digest, ISCSI_PARAM_DATADGST_EN);
+iscsi_conn_attr(ifmarker, ISCSI_PARAM_IFMARKER_EN);
+iscsi_conn_attr(ofmarker, ISCSI_PARAM_OFMARKER_EN);
+iscsi_conn_attr(persistent_port, ISCSI_PARAM_PERSISTENT_PORT);
+iscsi_conn_attr(port, ISCSI_PARAM_CONN_PORT);
+iscsi_conn_attr(exp_statsn, ISCSI_PARAM_EXP_STATSN);
+iscsi_conn_attr(persistent_address, ISCSI_PARAM_PERSISTENT_ADDRESS);
+iscsi_conn_attr(address, ISCSI_PARAM_CONN_ADDRESS);
 
 #define iscsi_cdev_to_session(_cdev) \
 	iscsi_dev_to_session(_cdev->dev)
@@ -1197,61 +1331,36 @@ iscsi_conn_str_attr(address, ISCSI_PARAM_CONN_ADDRESS);
 /*
  * iSCSI session attrs
  */
-#define iscsi_session_int_attr_show(param, format)			\
-static ssize_t								\
-show_session_int_param_##param(struct class_device *cdev, char *buf)	\
-{									\
-	uint32_t value = 0;						\
-	struct iscsi_cls_session *session = iscsi_cdev_to_session(cdev);	\
-	struct iscsi_transport *t = session->transport;			\
-									\
-	t->get_session_param(session, param, &value);			\
-	return snprintf(buf, 20, format"\n", value);			\
-}
-
-#define iscsi_session_int_attr(field, param, format)			\
-	iscsi_session_int_attr_show(param, format)			\
-static ISCSI_CLASS_ATTR(sess, field, S_IRUGO, show_session_int_param_##param, \
-			NULL);
-
-iscsi_session_int_attr(initial_r2t, ISCSI_PARAM_INITIAL_R2T_EN, "%d");
-iscsi_session_int_attr(max_outstanding_r2t, ISCSI_PARAM_MAX_R2T, "%hu");
-iscsi_session_int_attr(immediate_data, ISCSI_PARAM_IMM_DATA_EN, "%d");
-iscsi_session_int_attr(first_burst_len, ISCSI_PARAM_FIRST_BURST, "%u");
-iscsi_session_int_attr(max_burst_len, ISCSI_PARAM_MAX_BURST, "%u");
-iscsi_session_int_attr(data_pdu_in_order, ISCSI_PARAM_PDU_INORDER_EN, "%d");
-iscsi_session_int_attr(data_seq_in_order, ISCSI_PARAM_DATASEQ_INORDER_EN, "%d");
-iscsi_session_int_attr(erl, ISCSI_PARAM_ERL, "%d");
-iscsi_session_int_attr(tpgt, ISCSI_PARAM_TPGT, "%d");
-
-#define iscsi_session_str_attr_show(param)				\
+#define iscsi_session_attr_show(param)					\
 static ssize_t								\
-show_session_str_param_##param(struct class_device *cdev, char *buf)	\
+show_session_param_##param(struct class_device *cdev, char *buf)	\
 {									\
 	struct iscsi_cls_session *session = iscsi_cdev_to_session(cdev); \
 	struct iscsi_transport *t = session->transport;			\
-	return t->get_session_str_param(session, param, buf);		\
+	return t->get_session_param(session, param, buf);		\
 }
 
-#define iscsi_session_str_attr(field, param)				\
-	iscsi_session_str_attr_show(param)				\
-static ISCSI_CLASS_ATTR(sess, field, S_IRUGO, show_session_str_param_##param, \
+#define iscsi_session_attr(field, param)				\
+	iscsi_session_attr_show(param)					\
+static ISCSI_CLASS_ATTR(sess, field, S_IRUGO, show_session_param_##param, \
 			NULL);
 
-iscsi_session_str_attr(targetname, ISCSI_PARAM_TARGET_NAME);
+iscsi_session_attr(targetname, ISCSI_PARAM_TARGET_NAME);
+iscsi_session_attr(initial_r2t, ISCSI_PARAM_INITIAL_R2T_EN);
+iscsi_session_attr(max_outstanding_r2t, ISCSI_PARAM_MAX_R2T);
+iscsi_session_attr(immediate_data, ISCSI_PARAM_IMM_DATA_EN);
+iscsi_session_attr(first_burst_len, ISCSI_PARAM_FIRST_BURST);
+iscsi_session_attr(max_burst_len, ISCSI_PARAM_MAX_BURST);
+iscsi_session_attr(data_pdu_in_order, ISCSI_PARAM_PDU_INORDER_EN);
+iscsi_session_attr(data_seq_in_order, ISCSI_PARAM_DATASEQ_INORDER_EN);
+iscsi_session_attr(erl, ISCSI_PARAM_ERL);
+iscsi_session_attr(tpgt, ISCSI_PARAM_TPGT);
 
-/*
- * Private session and conn attrs. userspace uses several iscsi values
- * to identify each session between reboots. Some of these values may not
- * be present in the iscsi_transport/LLD driver becuase userspace handles
- * login (and failback for login redirect) so for these type of drivers
- * the class manages the attrs and values for the iscsi_transport/LLD
- */
 #define iscsi_priv_session_attr_show(field, format)			\
 static ssize_t								\
-show_priv_session_##field(struct class_device *cdev, char *buf)	\
+show_priv_session_##field(struct class_device *cdev, char *buf)		\
 {									\
-	struct iscsi_cls_session *session = iscsi_cdev_to_session(cdev); \
+	struct iscsi_cls_session *session = iscsi_cdev_to_session(cdev);\
 	return sprintf(buf, format"\n", session->field);		\
 }
 
@@ -1259,31 +1368,15 @@ show_priv_session_##field(struct class_device *cdev, char *buf)	\
 	iscsi_priv_session_attr_show(field, format)			\
 static ISCSI_CLASS_ATTR(priv_sess, field, S_IRUGO, show_priv_session_##field, \
 			NULL)
-iscsi_priv_session_attr(targetname, "%s");
-iscsi_priv_session_attr(tpgt, "%d");
 iscsi_priv_session_attr(recovery_tmo, "%d");
 
-#define iscsi_priv_conn_attr_show(field, format)			\
-static ssize_t								\
-show_priv_conn_##field(struct class_device *cdev, char *buf)		\
-{									\
-	struct iscsi_cls_conn *conn = iscsi_cdev_to_conn(cdev);		\
-	return sprintf(buf, format"\n", conn->field);			\
-}
-
-#define iscsi_priv_conn_attr(field, format)				\
-	iscsi_priv_conn_attr_show(field, format)			\
-static ISCSI_CLASS_ATTR(priv_conn, field, S_IRUGO, show_priv_conn_##field, \
-			NULL)
-iscsi_priv_conn_attr(persistent_address, "%s");
-iscsi_priv_conn_attr(persistent_port, "%d");
-
 #define SETUP_PRIV_SESSION_RD_ATTR(field)				\
 do {									\
 	priv->session_attrs[count] = &class_device_attr_priv_sess_##field; \
 	count++;							\
 } while (0)
 
+
 #define SETUP_SESSION_RD_ATTR(field, param_flag)			\
 do {									\
 	if (tt->param_mask & param_flag) {				\
@@ -1292,12 +1385,6 @@ do {									\
 	}								\
 } while (0)
 
-#define SETUP_PRIV_CONN_RD_ATTR(field)					\
-do {									\
-	priv->conn_attrs[count] = &class_device_attr_priv_conn_##field; \
-	count++;							\
-} while (0)
-
 #define SETUP_CONN_RD_ATTR(field, param_flag)				\
 do {									\
 	if (tt->param_mask & param_flag) {				\
@@ -1388,6 +1475,7 @@ iscsi_register_transport(struct iscsi_transport *tt)
 	if (!priv)
 		return NULL;
 	INIT_LIST_HEAD(&priv->list);
+	priv->daemon_pid = -1;
 	priv->iscsi_transport = tt;
 	priv->t.user_scan = iscsi_user_scan;
 
@@ -1424,16 +1512,8 @@ iscsi_register_transport(struct iscsi_transport *tt)
 	SETUP_CONN_RD_ATTR(address, ISCSI_CONN_ADDRESS);
 	SETUP_CONN_RD_ATTR(port, ISCSI_CONN_PORT);
 	SETUP_CONN_RD_ATTR(exp_statsn, ISCSI_EXP_STATSN);
-
-	if (tt->param_mask & ISCSI_PERSISTENT_ADDRESS)
-		SETUP_CONN_RD_ATTR(persistent_address, ISCSI_PERSISTENT_ADDRESS);
-	else
-		SETUP_PRIV_CONN_RD_ATTR(persistent_address);
-
-	if (tt->param_mask & ISCSI_PERSISTENT_PORT)
-		SETUP_CONN_RD_ATTR(persistent_port, ISCSI_PERSISTENT_PORT);
-	else
-		SETUP_PRIV_CONN_RD_ATTR(persistent_port);
+	SETUP_CONN_RD_ATTR(persistent_address, ISCSI_PERSISTENT_ADDRESS);
+	SETUP_CONN_RD_ATTR(persistent_port, ISCSI_PERSISTENT_PORT);
 
 	BUG_ON(count > ISCSI_CONN_ATTRS);
 	priv->conn_attrs[count] = NULL;
@@ -1453,18 +1533,10 @@ iscsi_register_transport(struct iscsi_transport *tt)
 	SETUP_SESSION_RD_ATTR(data_pdu_in_order, ISCSI_PDU_INORDER_EN);
 	SETUP_SESSION_RD_ATTR(data_seq_in_order, ISCSI_DATASEQ_INORDER_EN);
 	SETUP_SESSION_RD_ATTR(erl, ISCSI_ERL);
+	SETUP_SESSION_RD_ATTR(targetname, ISCSI_TARGET_NAME);
+	SETUP_SESSION_RD_ATTR(tpgt, ISCSI_TPGT);
 	SETUP_PRIV_SESSION_RD_ATTR(recovery_tmo);
 
-	if (tt->param_mask & ISCSI_TARGET_NAME)
-		SETUP_SESSION_RD_ATTR(targetname, ISCSI_TARGET_NAME);
-	else
-		SETUP_PRIV_SESSION_RD_ATTR(targetname);
-
-	if (tt->param_mask & ISCSI_TPGT)
-		SETUP_SESSION_RD_ATTR(tpgt, ISCSI_TPGT);
-	else
-		SETUP_PRIV_SESSION_RD_ATTR(tpgt);
-
 	BUG_ON(count > ISCSI_SESSION_ATTRS);
 	priv->session_attrs[count] = NULL;
 

drivers/scsi/scsi_transport_sas.c

@@ -174,11 +174,28 @@ static int sas_host_match(struct attribute_container *cont,
 
 static int do_sas_phy_delete(struct device *dev, void *data)
 {
-	if (scsi_is_sas_phy(dev))
+	int pass = (int)(unsigned long)data;
+
+	if (pass == 0 && scsi_is_sas_port(dev))
+		sas_port_delete(dev_to_sas_port(dev));
+	else if (pass == 1 && scsi_is_sas_phy(dev))
 		sas_phy_delete(dev_to_phy(dev));
 	return 0;
 }
 
+/**
+ * sas_remove_children  --  tear down a devices SAS data structures
+ * @dev:	device belonging to the sas object
+ *
+ * Removes all SAS PHYs and remote PHYs for a given object
+ */
+void sas_remove_children(struct device *dev)
+{
+	device_for_each_child(dev, (void *)0, do_sas_phy_delete);
+	device_for_each_child(dev, (void *)1, do_sas_phy_delete);
+}
+EXPORT_SYMBOL(sas_remove_children);
+
 /**
  * sas_remove_host  --  tear down a Scsi_Host's SAS data structures
  * @shost:	Scsi Host that is torn down
@@ -188,13 +205,13 @@ static int do_sas_phy_delete(struct device *dev, void *data)
  */
 void sas_remove_host(struct Scsi_Host *shost)
 {
-	device_for_each_child(&shost->shost_gendev, NULL, do_sas_phy_delete);
+	sas_remove_children(&shost->shost_gendev);
 }
 EXPORT_SYMBOL(sas_remove_host);
 
 
 /*
- * SAS Port attributes
+ * SAS Phy attributes
  */
 
 #define sas_phy_show_simple(field, name, format_string, cast)		\
@@ -310,7 +327,7 @@ sas_phy_protocol_attr(identify.target_port_protocols,
 sas_phy_simple_attr(identify.sas_address, sas_address, "0x%016llx\n",
 		unsigned long long);
 sas_phy_simple_attr(identify.phy_identifier, phy_identifier, "%d\n", u8);
-sas_phy_simple_attr(port_identifier, port_identifier, "%d\n", u8);
+//sas_phy_simple_attr(port_identifier, port_identifier, "%d\n", u8);
 sas_phy_linkspeed_attr(negotiated_linkrate);
 sas_phy_linkspeed_attr(minimum_linkrate_hw);
 sas_phy_linkspeed_attr(minimum_linkrate);
@@ -378,9 +395,10 @@ struct sas_phy *sas_phy_alloc(struct device *parent, int number)
 	device_initialize(&phy->dev);
 	phy->dev.parent = get_device(parent);
 	phy->dev.release = sas_phy_release;
+	INIT_LIST_HEAD(&phy->port_siblings);
 	if (scsi_is_sas_expander_device(parent)) {
 		struct sas_rphy *rphy = dev_to_rphy(parent);
-		sprintf(phy->dev.bus_id, "phy-%d-%d:%d", shost->host_no,
+		sprintf(phy->dev.bus_id, "phy-%d:%d:%d", shost->host_no,
 			rphy->scsi_target_id, number);
 	} else
 		sprintf(phy->dev.bus_id, "phy-%d:%d", shost->host_no, number);
@@ -440,8 +458,8 @@ sas_phy_delete(struct sas_phy *phy)
 {
 	struct device *dev = &phy->dev;
 
-	if (phy->rphy)
-		sas_rphy_delete(phy->rphy);
+	/* this happens if the phy is still part of a port when deleted */
+	BUG_ON(!list_empty(&phy->port_siblings));
 
 	transport_remove_device(dev);
 	device_del(dev);
@@ -463,6 +481,258 @@ int scsi_is_sas_phy(const struct device *dev)
 }
 EXPORT_SYMBOL(scsi_is_sas_phy);
 
+/*
+ * SAS Port attributes
+ */
+#define sas_port_show_simple(field, name, format_string, cast)		\
+static ssize_t								\
+show_sas_port_##name(struct class_device *cdev, char *buf)		\
+{									\
+	struct sas_port *port = transport_class_to_sas_port(cdev);	\
+									\
+	return snprintf(buf, 20, format_string, cast port->field);	\
+}
+
+#define sas_port_simple_attr(field, name, format_string, type)		\
+	sas_port_show_simple(field, name, format_string, (type))	\
+static CLASS_DEVICE_ATTR(name, S_IRUGO, show_sas_port_##name, NULL)
+
+sas_port_simple_attr(num_phys, num_phys, "%d\n", int);
+
+static DECLARE_TRANSPORT_CLASS(sas_port_class,
+			       "sas_port", NULL, NULL, NULL);
+
+static int sas_port_match(struct attribute_container *cont, struct device *dev)
+{
+	struct Scsi_Host *shost;
+	struct sas_internal *i;
+
+	if (!scsi_is_sas_port(dev))
+		return 0;
+	shost = dev_to_shost(dev->parent);
+
+	if (!shost->transportt)
+		return 0;
+	if (shost->transportt->host_attrs.ac.class !=
+			&sas_host_class.class)
+		return 0;
+
+	i = to_sas_internal(shost->transportt);
+	return &i->port_attr_cont.ac == cont;
+}
+
+
+static void sas_port_release(struct device *dev)
+{
+	struct sas_port *port = dev_to_sas_port(dev);
+
+	BUG_ON(!list_empty(&port->phy_list));
+
+	put_device(dev->parent);
+	kfree(port);
+}
+
+static void sas_port_create_link(struct sas_port *port,
+				 struct sas_phy *phy)
+{
+	sysfs_create_link(&port->dev.kobj, &phy->dev.kobj, phy->dev.bus_id);
+	sysfs_create_link(&phy->dev.kobj, &port->dev.kobj, "port");
+}
+
+static void sas_port_delete_link(struct sas_port *port,
+				 struct sas_phy *phy)
+{
+	sysfs_remove_link(&port->dev.kobj, phy->dev.bus_id);
+	sysfs_remove_link(&phy->dev.kobj, "port");
+}
+
+/** sas_port_alloc - allocate and initialize a SAS port structure
+ *
+ * @parent:	parent device
+ * @port_id:	port number
+ *
+ * Allocates a SAS port structure.  It will be added to the device tree
+ * below the device specified by @parent which must be either a Scsi_Host
+ * or a sas_expander_device.
+ *
+ * Returns %NULL on error
+ */
+struct sas_port *sas_port_alloc(struct device *parent, int port_id)
+{
+	struct Scsi_Host *shost = dev_to_shost(parent);
+	struct sas_port *port;
+
+	port = kzalloc(sizeof(*port), GFP_KERNEL);
+	if (!port)
+		return NULL;
+
+	port->port_identifier = port_id;
+
+	device_initialize(&port->dev);
+
+	port->dev.parent = get_device(parent);
+	port->dev.release = sas_port_release;
+
+	mutex_init(&port->phy_list_mutex);
+	INIT_LIST_HEAD(&port->phy_list);
+
+	if (scsi_is_sas_expander_device(parent)) {
+		struct sas_rphy *rphy = dev_to_rphy(parent);
+		sprintf(port->dev.bus_id, "port-%d:%d:%d", shost->host_no,
+			rphy->scsi_target_id, port->port_identifier);
+	} else
+		sprintf(port->dev.bus_id, "port-%d:%d", shost->host_no,
+			port->port_identifier);
+
+	transport_setup_device(&port->dev);
+
+	return port;
+}
+EXPORT_SYMBOL(sas_port_alloc);
+
+/**
+ * sas_port_add - add a SAS port to the device hierarchy
+ *
+ * @port:	port to be added
+ *
+ * publishes a port to the rest of the system
+ */
+int sas_port_add(struct sas_port *port)
+{
+	int error;
+
+	/* No phys should be added until this is made visible */
+	BUG_ON(!list_empty(&port->phy_list));
+
+	error = device_add(&port->dev);
+
+	if (error)
+		return error;
+
+	transport_add_device(&port->dev);
+	transport_configure_device(&port->dev);
+
+	return 0;
+}
+EXPORT_SYMBOL(sas_port_add);
+
+/**
+ * sas_port_free  --  free a SAS PORT
+ * @port:	SAS PORT to free
+ *
+ * Frees the specified SAS PORT.
+ *
+ * Note:
+ *   This function must only be called on a PORT that has not
+ *   sucessfully been added using sas_port_add().
+ */
+void sas_port_free(struct sas_port *port)
+{
+	transport_destroy_device(&port->dev);
+	put_device(&port->dev);
+}
+EXPORT_SYMBOL(sas_port_free);
+
+/**
+ * sas_port_delete  --  remove SAS PORT
+ * @port:	SAS PORT to remove
+ *
+ * Removes the specified SAS PORT.  If the SAS PORT has an
+ * associated phys, unlink them from the port as well.
+ */
+void sas_port_delete(struct sas_port *port)
+{
+	struct device *dev = &port->dev;
+	struct sas_phy *phy, *tmp_phy;
+
+	if (port->rphy) {
+		sas_rphy_delete(port->rphy);
+		port->rphy = NULL;
+	}
+
+	mutex_lock(&port->phy_list_mutex);
+	list_for_each_entry_safe(phy, tmp_phy, &port->phy_list,
+				 port_siblings) {
+		sas_port_delete_link(port, phy);
+		list_del_init(&phy->port_siblings);
+	}
+	mutex_unlock(&port->phy_list_mutex);
+
+	transport_remove_device(dev);
+	device_del(dev);
+	transport_destroy_device(dev);
+	put_device(dev);
+}
+EXPORT_SYMBOL(sas_port_delete);
+
+/**
+ * scsi_is_sas_port --  check if a struct device represents a SAS port
+ * @dev:	device to check
+ *
+ * Returns:
+ *	%1 if the device represents a SAS Port, %0 else
+ */
+int scsi_is_sas_port(const struct device *dev)
+{
+	return dev->release == sas_port_release;
+}
+EXPORT_SYMBOL(scsi_is_sas_port);
+
+/**
+ * sas_port_add_phy - add another phy to a port to form a wide port
+ * @port:	port to add the phy to
+ * @phy:	phy to add
+ *
+ * When a port is initially created, it is empty (has no phys).  All
+ * ports must have at least one phy to operated, and all wide ports
+ * must have at least two.  The current code makes no difference
+ * between ports and wide ports, but the only object that can be
+ * connected to a remote device is a port, so ports must be formed on
+ * all devices with phys if they're connected to anything.
+ */
+void sas_port_add_phy(struct sas_port *port, struct sas_phy *phy)
+{
+	mutex_lock(&port->phy_list_mutex);
+	if (unlikely(!list_empty(&phy->port_siblings))) {
+		/* make sure we're already on this port */
+		struct sas_phy *tmp;
+
+		list_for_each_entry(tmp, &port->phy_list, port_siblings)
+			if (tmp == phy)
+				break;
+		/* If this trips, you added a phy that was already
+		 * part of a different port */
+		if (unlikely(tmp != phy)) {
+			dev_printk(KERN_ERR, &port->dev, "trying to add phy %s fails: it's already part of another port\n", phy->dev.bus_id);
+			BUG();
+		}
+	} else {
+		sas_port_create_link(port, phy);
+		list_add_tail(&phy->port_siblings, &port->phy_list);
+		port->num_phys++;
+	}
+	mutex_unlock(&port->phy_list_mutex);
+}
+EXPORT_SYMBOL(sas_port_add_phy);
+
+/**
+ * sas_port_delete_phy - remove a phy from a port or wide port
+ * @port:	port to remove the phy from
+ * @phy:	phy to remove
+ *
+ * This operation is used for tearing down ports again.  It must be
+ * done to every port or wide port before calling sas_port_delete.
+ */
+void sas_port_delete_phy(struct sas_port *port, struct sas_phy *phy)
+{
+	mutex_lock(&port->phy_list_mutex);
+	sas_port_delete_link(port, phy);
+	list_del_init(&phy->port_siblings);
+	port->num_phys--;
+	mutex_unlock(&port->phy_list_mutex);
+}
+EXPORT_SYMBOL(sas_port_delete_phy);
+
 /*
  * SAS remote PHY attributes.
  */
@@ -767,7 +1037,7 @@ static void sas_rphy_initialize(struct sas_rphy *rphy)
  * Returns:
  *	SAS PHY allocated or %NULL if the allocation failed.
  */
-struct sas_rphy *sas_end_device_alloc(struct sas_phy *parent)
+struct sas_rphy *sas_end_device_alloc(struct sas_port *parent)
 {
 	struct Scsi_Host *shost = dev_to_shost(&parent->dev);
 	struct sas_end_device *rdev;
@@ -780,8 +1050,13 @@ struct sas_rphy *sas_end_device_alloc(struct sas_phy *parent)
 	device_initialize(&rdev->rphy.dev);
 	rdev->rphy.dev.parent = get_device(&parent->dev);
 	rdev->rphy.dev.release = sas_end_device_release;
-	sprintf(rdev->rphy.dev.bus_id, "end_device-%d:%d-%d",
-		shost->host_no, parent->port_identifier, parent->number);
+	if (scsi_is_sas_expander_device(parent->dev.parent)) {
+		struct sas_rphy *rphy = dev_to_rphy(parent->dev.parent);
+		sprintf(rdev->rphy.dev.bus_id, "end_device-%d:%d:%d",
+			shost->host_no, rphy->scsi_target_id, parent->port_identifier);
+	} else
+		sprintf(rdev->rphy.dev.bus_id, "end_device-%d:%d",
+			shost->host_no, parent->port_identifier);
 	rdev->rphy.identify.device_type = SAS_END_DEVICE;
 	sas_rphy_initialize(&rdev->rphy);
 	transport_setup_device(&rdev->rphy.dev);
@@ -798,7 +1073,7 @@ EXPORT_SYMBOL(sas_end_device_alloc);
  * Returns:
  *	SAS PHY allocated or %NULL if the allocation failed.
  */
-struct sas_rphy *sas_expander_alloc(struct sas_phy *parent,
+struct sas_rphy *sas_expander_alloc(struct sas_port *parent,
 				    enum sas_device_type type)
 {
 	struct Scsi_Host *shost = dev_to_shost(&parent->dev);
@@ -837,7 +1112,7 @@ EXPORT_SYMBOL(sas_expander_alloc);
  */
 int sas_rphy_add(struct sas_rphy *rphy)
 {
-	struct sas_phy *parent = dev_to_phy(rphy->dev.parent);
+	struct sas_port *parent = dev_to_sas_port(rphy->dev.parent);
 	struct Scsi_Host *shost = dev_to_shost(parent->dev.parent);
 	struct sas_host_attrs *sas_host = to_sas_host_attrs(shost);
 	struct sas_identify *identify = &rphy->identify;
@@ -910,7 +1185,7 @@ void
 sas_rphy_delete(struct sas_rphy *rphy)
 {
 	struct device *dev = &rphy->dev;
-	struct sas_phy *parent = dev_to_phy(dev->parent);
+	struct sas_port *parent = dev_to_sas_port(dev->parent);
 	struct Scsi_Host *shost = dev_to_shost(parent->dev.parent);
 	struct sas_host_attrs *sas_host = to_sas_host_attrs(shost);
 
@@ -920,7 +1195,7 @@ sas_rphy_delete(struct sas_rphy *rphy)
 		break;
 	case SAS_EDGE_EXPANDER_DEVICE:
 	case SAS_FANOUT_EXPANDER_DEVICE:
-		device_for_each_child(dev, NULL, do_sas_phy_delete);
+		sas_remove_children(dev);
 		break;
 	default:
 		break;
@@ -967,7 +1242,7 @@ static int sas_user_scan(struct Scsi_Host *shost, uint channel,
 
 	mutex_lock(&sas_host->lock);
 	list_for_each_entry(rphy, &sas_host->rphy_list, list) {
-		struct sas_phy *parent = dev_to_phy(rphy->dev.parent);
+		struct sas_port *parent = dev_to_sas_port(rphy->dev.parent);
 
 		if (rphy->identify.device_type != SAS_END_DEVICE ||
 		    rphy->scsi_target_id == -1)
@@ -1003,16 +1278,19 @@ static int sas_user_scan(struct Scsi_Host *shost, uint channel,
 #define SETUP_OPTIONAL_RPORT_ATTRIBUTE(field, func)			\
 	SETUP_TEMPLATE(rphy_attrs, field, S_IRUGO, i->f->func)
 
-#define SETUP_PORT_ATTRIBUTE(field)					\
+#define SETUP_PHY_ATTRIBUTE(field)					\
 	SETUP_TEMPLATE(phy_attrs, field, S_IRUGO, 1)
 
-#define SETUP_OPTIONAL_PORT_ATTRIBUTE(field, func)			\
+#define SETUP_PORT_ATTRIBUTE(field)					\
+	SETUP_TEMPLATE(port_attrs, field, S_IRUGO, 1)
+
+#define SETUP_OPTIONAL_PHY_ATTRIBUTE(field, func)			\
 	SETUP_TEMPLATE(phy_attrs, field, S_IRUGO, i->f->func)
 
-#define SETUP_PORT_ATTRIBUTE_WRONLY(field)				\
+#define SETUP_PHY_ATTRIBUTE_WRONLY(field)				\
 	SETUP_TEMPLATE(phy_attrs, field, S_IWUGO, 1)
 
-#define SETUP_OPTIONAL_PORT_ATTRIBUTE_WRONLY(field, func)		\
+#define SETUP_OPTIONAL_PHY_ATTRIBUTE_WRONLY(field, func)		\
 	SETUP_TEMPLATE(phy_attrs, field, S_IWUGO, i->f->func)
 
 #define SETUP_END_DEV_ATTRIBUTE(field)					\
@@ -1048,6 +1326,11 @@ sas_attach_transport(struct sas_function_template *ft)
 	i->phy_attr_cont.ac.match = sas_phy_match;
 	transport_container_register(&i->phy_attr_cont);
 
+	i->port_attr_cont.ac.class = &sas_port_class.class;
+	i->port_attr_cont.ac.attrs = &i->port_attrs[0];
+	i->port_attr_cont.ac.match = sas_port_match;
+	transport_container_register(&i->port_attr_cont);
+
 	i->rphy_attr_cont.ac.class = &sas_rphy_class.class;
 	i->rphy_attr_cont.ac.attrs = &i->rphy_attrs[0];
 	i->rphy_attr_cont.ac.match = sas_rphy_match;
@@ -1066,29 +1349,34 @@ sas_attach_transport(struct sas_function_template *ft)
 	i->f = ft;
 
 	count = 0;
+	SETUP_PORT_ATTRIBUTE(num_phys);
 	i->host_attrs[count] = NULL;
 
 	count = 0;
-	SETUP_PORT_ATTRIBUTE(initiator_port_protocols);
-	SETUP_PORT_ATTRIBUTE(target_port_protocols);
-	SETUP_PORT_ATTRIBUTE(device_type);
-	SETUP_PORT_ATTRIBUTE(sas_address);
-	SETUP_PORT_ATTRIBUTE(phy_identifier);
-	SETUP_PORT_ATTRIBUTE(port_identifier);
-	SETUP_PORT_ATTRIBUTE(negotiated_linkrate);
-	SETUP_PORT_ATTRIBUTE(minimum_linkrate_hw);
-	SETUP_PORT_ATTRIBUTE(minimum_linkrate);
-	SETUP_PORT_ATTRIBUTE(maximum_linkrate_hw);
-	SETUP_PORT_ATTRIBUTE(maximum_linkrate);
-
-	SETUP_PORT_ATTRIBUTE(invalid_dword_count);
-	SETUP_PORT_ATTRIBUTE(running_disparity_error_count);
-	SETUP_PORT_ATTRIBUTE(loss_of_dword_sync_count);
-	SETUP_PORT_ATTRIBUTE(phy_reset_problem_count);
-	SETUP_OPTIONAL_PORT_ATTRIBUTE_WRONLY(link_reset, phy_reset);
-	SETUP_OPTIONAL_PORT_ATTRIBUTE_WRONLY(hard_reset, phy_reset);
+	SETUP_PHY_ATTRIBUTE(initiator_port_protocols);
+	SETUP_PHY_ATTRIBUTE(target_port_protocols);
+	SETUP_PHY_ATTRIBUTE(device_type);
+	SETUP_PHY_ATTRIBUTE(sas_address);
+	SETUP_PHY_ATTRIBUTE(phy_identifier);
+	//SETUP_PHY_ATTRIBUTE(port_identifier);
+	SETUP_PHY_ATTRIBUTE(negotiated_linkrate);
+	SETUP_PHY_ATTRIBUTE(minimum_linkrate_hw);
+	SETUP_PHY_ATTRIBUTE(minimum_linkrate);
+	SETUP_PHY_ATTRIBUTE(maximum_linkrate_hw);
+	SETUP_PHY_ATTRIBUTE(maximum_linkrate);
+
+	SETUP_PHY_ATTRIBUTE(invalid_dword_count);
+	SETUP_PHY_ATTRIBUTE(running_disparity_error_count);
+	SETUP_PHY_ATTRIBUTE(loss_of_dword_sync_count);
+	SETUP_PHY_ATTRIBUTE(phy_reset_problem_count);
+	SETUP_OPTIONAL_PHY_ATTRIBUTE_WRONLY(link_reset, phy_reset);
+	SETUP_OPTIONAL_PHY_ATTRIBUTE_WRONLY(hard_reset, phy_reset);
 	i->phy_attrs[count] = NULL;
 
+	count = 0;
+	SETUP_PORT_ATTRIBUTE(num_phys);
+	i->port_attrs[count] = NULL;
+
 	count = 0;
 	SETUP_RPORT_ATTRIBUTE(rphy_initiator_port_protocols);
 	SETUP_RPORT_ATTRIBUTE(rphy_target_port_protocols);
@@ -1131,6 +1419,7 @@ void sas_release_transport(struct scsi_transport_template *t)
 
 	transport_container_unregister(&i->t.host_attrs);
 	transport_container_unregister(&i->phy_attr_cont);
+	transport_container_unregister(&i->port_attr_cont);
 	transport_container_unregister(&i->rphy_attr_cont);
 	transport_container_unregister(&i->end_dev_attr_cont);
 	transport_container_unregister(&i->expander_attr_cont);
@@ -1149,9 +1438,12 @@ static __init int sas_transport_init(void)
 	error = transport_class_register(&sas_phy_class);
 	if (error)
 		goto out_unregister_transport;
-	error = transport_class_register(&sas_rphy_class);
+	error = transport_class_register(&sas_port_class);
 	if (error)
 		goto out_unregister_phy;
+	error = transport_class_register(&sas_rphy_class);
+	if (error)
+		goto out_unregister_port;
 	error = transport_class_register(&sas_end_dev_class);
 	if (error)
 		goto out_unregister_rphy;
@@ -1165,6 +1457,8 @@ static __init int sas_transport_init(void)
 	transport_class_unregister(&sas_end_dev_class);
  out_unregister_rphy:
 	transport_class_unregister(&sas_rphy_class);
+ out_unregister_port:
+	transport_class_unregister(&sas_port_class);
  out_unregister_phy:
 	transport_class_unregister(&sas_phy_class);
  out_unregister_transport:
@@ -1178,6 +1472,7 @@ static void __exit sas_transport_exit(void)
 {
 	transport_class_unregister(&sas_host_class);
 	transport_class_unregister(&sas_phy_class);
+	transport_class_unregister(&sas_port_class);
 	transport_class_unregister(&sas_rphy_class);
 	transport_class_unregister(&sas_end_dev_class);
 	transport_class_unregister(&sas_expander_class);

drivers/scsi/scsicam.c

@@ -57,6 +57,7 @@ EXPORT_SYMBOL(scsi_bios_ptable);
 int scsicam_bios_param(struct block_device *bdev, sector_t capacity, int *ip)
 {
 	unsigned char *p;
+	u64 capacity64 = capacity;	/* Suppress gcc warning */
 	int ret;
 
 	p = scsi_bios_ptable(bdev);
@@ -68,7 +69,7 @@ int scsicam_bios_param(struct block_device *bdev, sector_t capacity, int *ip)
 			       (unsigned int *)ip + 0, (unsigned int *)ip + 1);
 	kfree(p);
 
-	if (ret == -1) {
+	if (ret == -1 && capacity64 < (1ULL << 32)) {
 		/* pick some standard mapping with at most 1024 cylinders,
 		   and at most 62 sectors per track - this works up to
 		   7905 MB */

drivers/scsi/sd.c

@@ -207,6 +207,23 @@ static ssize_t sd_store_cache_type(struct class_device *cdev, const char *buf,
 	return count;
 }
 
+static ssize_t sd_store_allow_restart(struct class_device *cdev, const char *buf,
+				      size_t count)
+{
+	struct scsi_disk *sdkp = to_scsi_disk(cdev);
+	struct scsi_device *sdp = sdkp->device;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EACCES;
+
+	if (sdp->type != TYPE_DISK)
+		return -EINVAL;
+
+	sdp->allow_restart = simple_strtoul(buf, NULL, 10);
+
+	return count;
+}
+
 static ssize_t sd_show_cache_type(struct class_device *cdev, char *buf)
 {
 	struct scsi_disk *sdkp = to_scsi_disk(cdev);
@@ -222,10 +239,19 @@ static ssize_t sd_show_fua(struct class_device *cdev, char *buf)
 	return snprintf(buf, 20, "%u\n", sdkp->DPOFUA);
 }
 
+static ssize_t sd_show_allow_restart(struct class_device *cdev, char *buf)
+{
+	struct scsi_disk *sdkp = to_scsi_disk(cdev);
+
+	return snprintf(buf, 40, "%d\n", sdkp->device->allow_restart);
+}
+
 static struct class_device_attribute sd_disk_attrs[] = {
 	__ATTR(cache_type, S_IRUGO|S_IWUSR, sd_show_cache_type,
 	       sd_store_cache_type),
 	__ATTR(FUA, S_IRUGO, sd_show_fua, NULL),
+	__ATTR(allow_restart, S_IRUGO|S_IWUSR, sd_show_allow_restart,
+	       sd_store_allow_restart),
 	__ATTR_NULL,
 };
 
@@ -890,11 +916,10 @@ static struct block_device_operations sd_fops = {
 static void sd_rw_intr(struct scsi_cmnd * SCpnt)
 {
 	int result = SCpnt->result;
-	int this_count = SCpnt->request_bufflen;
-	int good_bytes = (result == 0 ? this_count : 0);
-	sector_t block_sectors = 1;
-	u64 first_err_block;
-	sector_t error_sector;
+ 	unsigned int xfer_size = SCpnt->request_bufflen;
+ 	unsigned int good_bytes = result ? 0 : xfer_size;
+ 	u64 start_lba = SCpnt->request->sector;
+ 	u64 bad_lba;
 	struct scsi_sense_hdr sshdr;
 	int sense_valid = 0;
 	int sense_deferred = 0;
@@ -905,7 +930,6 @@ static void sd_rw_intr(struct scsi_cmnd * SCpnt)
 		if (sense_valid)
 			sense_deferred = scsi_sense_is_deferred(&sshdr);
 	}
-
 #ifdef CONFIG_SCSI_LOGGING
 	SCSI_LOG_HLCOMPLETE(1, printk("sd_rw_intr: %s: res=0x%x\n", 
 				SCpnt->request->rq_disk->disk_name, result));
@@ -915,89 +939,72 @@ static void sd_rw_intr(struct scsi_cmnd * SCpnt)
 				sshdr.sense_key, sshdr.asc, sshdr.ascq));
 	}
 #endif
-	/*
-	   Handle MEDIUM ERRORs that indicate partial success.  Since this is a
-	   relatively rare error condition, no care is taken to avoid
-	   unnecessary additional work such as memcpy's that could be avoided.
-	 */
-	if (driver_byte(result) != 0 &&
-		 sense_valid && !sense_deferred) {
-		switch (sshdr.sense_key) {
-		case MEDIUM_ERROR:
-			if (!blk_fs_request(SCpnt->request))
-				break;
-			info_valid = scsi_get_sense_info_fld(
-				SCpnt->sense_buffer, SCSI_SENSE_BUFFERSIZE,
-				&first_err_block);
-			/*
-			 * May want to warn and skip if following cast results
-			 * in actual truncation (if sector_t < 64 bits)
-			 */
-			error_sector = (sector_t)first_err_block;
-			if (SCpnt->request->bio != NULL)
-				block_sectors = bio_sectors(SCpnt->request->bio);
-			switch (SCpnt->device->sector_size) {
-			case 1024:
-				error_sector <<= 1;
-				if (block_sectors < 2)
-					block_sectors = 2;
-				break;
-			case 2048:
-				error_sector <<= 2;
-				if (block_sectors < 4)
-					block_sectors = 4;
-				break;
-			case 4096:
-				error_sector <<=3;
-				if (block_sectors < 8)
-					block_sectors = 8;
-				break;
-			case 256:
-				error_sector >>= 1;
-				break;
-			default:
-				break;
-			}
+	if (driver_byte(result) != DRIVER_SENSE &&
+	    (!sense_valid || sense_deferred))
+		goto out;
 
-			error_sector &= ~(block_sectors - 1);
-			good_bytes = (error_sector - SCpnt->request->sector) << 9;
-			if (good_bytes < 0 || good_bytes >= this_count)
-				good_bytes = 0;
+	switch (sshdr.sense_key) {
+	case HARDWARE_ERROR:
+	case MEDIUM_ERROR:
+		if (!blk_fs_request(SCpnt->request))
+			goto out;
+		info_valid = scsi_get_sense_info_fld(SCpnt->sense_buffer,
+						     SCSI_SENSE_BUFFERSIZE,
+						     &bad_lba);
+		if (!info_valid)
+			goto out;
+		if (xfer_size <= SCpnt->device->sector_size)
+			goto out;
+		switch (SCpnt->device->sector_size) {
+		case 256:
+			start_lba <<= 1;
 			break;
-
-		case RECOVERED_ERROR: /* an error occurred, but it recovered */
-		case NO_SENSE: /* LLDD got sense data */
-			/*
-			 * Inform the user, but make sure that it's not treated
-			 * as a hard error.
-			 */
-			scsi_print_sense("sd", SCpnt);
-			SCpnt->result = 0;
-			memset(SCpnt->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
-			good_bytes = this_count;
+		case 512:
 			break;
-
-		case ILLEGAL_REQUEST:
-			if (SCpnt->device->use_10_for_rw &&
-			    (SCpnt->cmnd[0] == READ_10 ||
-			     SCpnt->cmnd[0] == WRITE_10))
-				SCpnt->device->use_10_for_rw = 0;
-			if (SCpnt->device->use_10_for_ms &&
-			    (SCpnt->cmnd[0] == MODE_SENSE_10 ||
-			     SCpnt->cmnd[0] == MODE_SELECT_10))
-				SCpnt->device->use_10_for_ms = 0;
+		case 1024:
+			start_lba >>= 1;
+			break;
+		case 2048:
+			start_lba >>= 2;
+			break;
+		case 4096:
+			start_lba >>= 3;
 			break;
-
 		default:
+			/* Print something here with limiting frequency. */
+			goto out;
 			break;
 		}
+		/* This computation should always be done in terms of
+		 * the resolution of the device's medium.
+		 */
+		good_bytes = (bad_lba - start_lba)*SCpnt->device->sector_size;
+		break;
+	case RECOVERED_ERROR:
+	case NO_SENSE:
+		/* Inform the user, but make sure that it's not treated
+		 * as a hard error.
+		 */
+		scsi_print_sense("sd", SCpnt);
+		SCpnt->result = 0;
+		memset(SCpnt->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
+		good_bytes = xfer_size;
+		break;
+	case ILLEGAL_REQUEST:
+		if (SCpnt->device->use_10_for_rw &&
+		    (SCpnt->cmnd[0] == READ_10 ||
+		     SCpnt->cmnd[0] == WRITE_10))
+			SCpnt->device->use_10_for_rw = 0;
+		if (SCpnt->device->use_10_for_ms &&
+		    (SCpnt->cmnd[0] == MODE_SENSE_10 ||
+		     SCpnt->cmnd[0] == MODE_SELECT_10))
+			SCpnt->device->use_10_for_ms = 0;
+		break;
+	default:
+		break;
 	}
-	/*
-	 * This calls the generic completion function, now that we know
-	 * how many actual sectors finished, and how many sectors we need
-	 * to say have failed.
-	 */
-	scsi_io_completion(SCpnt, good_bytes, block_sectors << 9);
+ out:
+	scsi_io_completion(SCpnt, good_bytes);
 }
 
 static int media_not_present(struct scsi_disk *sdkp,

drivers/scsi/sg.c

@@ -1401,6 +1401,7 @@ sg_add(struct class_device *cl_dev, struct class_interface *cl_intf)
 	Sg_device *sdp = NULL;
 	struct cdev * cdev = NULL;
 	int error, k;
+	unsigned long iflags;
 
 	disk = alloc_disk(1);
 	if (!disk) {
@@ -1428,7 +1429,7 @@ sg_add(struct class_device *cl_dev, struct class_interface *cl_intf)
 
 	error = cdev_add(cdev, MKDEV(SCSI_GENERIC_MAJOR, k), 1);
 	if (error)
-		goto out;
+		goto cdev_add_err;
 
 	sdp->cdev = cdev;
 	if (sg_sysfs_valid) {
@@ -1455,6 +1456,13 @@ sg_add(struct class_device *cl_dev, struct class_interface *cl_intf)
 
 	return 0;
 
+cdev_add_err:
+	write_lock_irqsave(&sg_dev_arr_lock, iflags);
+	kfree(sg_dev_arr[k]);
+	sg_dev_arr[k] = NULL;
+	sg_nr_dev--;
+	write_unlock_irqrestore(&sg_dev_arr_lock, iflags);
+
 out:
 	put_disk(disk);
 	if (cdev)

drivers/scsi/sr.c

@@ -292,7 +292,7 @@ static void rw_intr(struct scsi_cmnd * SCpnt)
 	 * how many actual sectors finished, and how many sectors we need
 	 * to say have failed.
 	 */
-	scsi_io_completion(SCpnt, good_bytes, block_sectors << 9);
+	scsi_io_completion(SCpnt, good_bytes);
 }
 
 static int sr_init_command(struct scsi_cmnd * SCpnt)

drivers/scsi/st.c

@@ -3599,7 +3599,6 @@ static struct st_buffer *
 	tb->use_sg = max_sg;
 	tb->frp = (struct st_buf_fragment *)(&(tb->sg[0]) + max_sg);
 
-	tb->in_use = 1;
 	tb->dma = need_dma;
 	tb->buffer_size = got;
 

drivers/scsi/st.h

@@ -31,7 +31,6 @@ struct st_request {
 
 /* The tape buffer descriptor. */
 struct st_buffer {
-	unsigned char in_use;
 	unsigned char dma;	/* DMA-able buffer */
 	unsigned char do_dio;   /* direct i/o set up? */
 	int buffer_size;

include/scsi/iscsi_if.h

@@ -47,10 +47,19 @@ enum iscsi_uevent_e {
 	ISCSI_UEVENT_TRANSPORT_EP_POLL		= UEVENT_BASE + 13,
 	ISCSI_UEVENT_TRANSPORT_EP_DISCONNECT	= UEVENT_BASE + 14,
 
+	ISCSI_UEVENT_TGT_DSCVR		= UEVENT_BASE + 15,
+
 	/* up events */
 	ISCSI_KEVENT_RECV_PDU		= KEVENT_BASE + 1,
 	ISCSI_KEVENT_CONN_ERROR		= KEVENT_BASE + 2,
 	ISCSI_KEVENT_IF_ERROR		= KEVENT_BASE + 3,
+	ISCSI_KEVENT_DESTROY_SESSION	= KEVENT_BASE + 4,
+};
+
+enum iscsi_tgt_dscvr {
+	ISCSI_TGT_DSCVR_SEND_TARGETS	= 1,
+	ISCSI_TGT_DSCVR_ISNS		= 2,
+	ISCSI_TGT_DSCVR_SLP		= 3,
 };
 
 struct iscsi_uevent {
@@ -116,6 +125,17 @@ struct iscsi_uevent {
 		struct msg_transport_disconnect {
 			uint64_t	ep_handle;
 		} ep_disconnect;
+		struct msg_tgt_dscvr {
+			enum iscsi_tgt_dscvr	type;
+			uint32_t	host_no;
+			/*
+ 			 * enable = 1 to establish a new connection
+			 * with the server. enable = 0 to disconnect
+			 * from the server. Used primarily to switch
+			 * from one iSNS server to another.
+			 */
+			uint32_t	enable;
+		} tgt_dscvr;
 	} u;
 	union {
 		/* messages k -> u */
@@ -138,6 +158,10 @@ struct iscsi_uevent {
 			uint32_t	cid;
 			uint32_t	error; /* enum iscsi_err */
 		} connerror;
+		struct msg_session_destroyed {
+			uint32_t	host_no;
+			uint32_t	sid;
+		} d_session;
 		struct msg_transport_connect_ret {
 			uint64_t	handle;
 		} ep_connect_ret;

include/scsi/libiscsi.h

@@ -157,6 +157,11 @@ struct iscsi_conn {
 	int			max_xmit_dlength; /* target_max_recv_dsl */
 	int			hdrdgst_en;
 	int			datadgst_en;
+	int			ifmarker_en;
+	int			ofmarker_en;
+	/* values userspace uses to id a conn */
+	int			persistent_port;
+	char			*persistent_address;
 
 	/* MIB-statistics */
 	uint64_t		txdata_octets;
@@ -196,8 +201,8 @@ struct iscsi_session {
 	int			pdu_inorder_en;
 	int			dataseq_inorder_en;
 	int			erl;
-	int			ifmarker_en;
-	int			ofmarker_en;
+	int			tpgt;
+	char			*targetname;
 
 	/* control data */
 	struct iscsi_transport	*tt;
@@ -240,6 +245,10 @@ iscsi_session_setup(struct iscsi_transport *, struct scsi_transport_template *,
 extern void iscsi_session_teardown(struct iscsi_cls_session *);
 extern struct iscsi_session *class_to_transport_session(struct iscsi_cls_session *);
 extern void iscsi_session_recovery_timedout(struct iscsi_cls_session *);
+extern int iscsi_set_param(struct iscsi_cls_conn *cls_conn,
+			   enum iscsi_param param, char *buf, int buflen);
+extern int iscsi_session_get_param(struct iscsi_cls_session *cls_session,
+				   enum iscsi_param param, char *buf);
 
 #define session_to_cls(_sess) \
 	hostdata_session(_sess->host->hostdata)
@@ -255,6 +264,8 @@ extern void iscsi_conn_stop(struct iscsi_cls_conn *, int);
 extern int iscsi_conn_bind(struct iscsi_cls_session *, struct iscsi_cls_conn *,
 			   int);
 extern void iscsi_conn_failure(struct iscsi_conn *conn, enum iscsi_err err);
+extern int iscsi_conn_get_param(struct iscsi_cls_conn *cls_conn,
+				enum iscsi_param param, char *buf);
 
 /*
  * pdu and task processing

include/scsi/scsi_cmnd.h

@@ -143,7 +143,7 @@ struct scsi_cmnd {
 
 extern struct scsi_cmnd *scsi_get_command(struct scsi_device *, gfp_t);
 extern void scsi_put_command(struct scsi_cmnd *);
-extern void scsi_io_completion(struct scsi_cmnd *, unsigned int, unsigned int);
+extern void scsi_io_completion(struct scsi_cmnd *, unsigned int);
 extern void scsi_finish_command(struct scsi_cmnd *cmd);
 extern void scsi_req_abort_cmd(struct scsi_cmnd *cmd);
 

include/scsi/scsi_host.h

@@ -542,6 +542,9 @@ struct Scsi_Host {
 	 */
 	unsigned ordered_tag:1;
 
+	/* task mgmt function in progress */
+	unsigned tmf_in_progress:1;
+
 	/*
 	 * Optional work queue to be utilized by the transport
 	 */
@@ -619,7 +622,8 @@ static inline int scsi_host_in_recovery(struct Scsi_Host *shost)
 {
 	return shost->shost_state == SHOST_RECOVERY ||
 		shost->shost_state == SHOST_CANCEL_RECOVERY ||
-		shost->shost_state == SHOST_DEL_RECOVERY;
+		shost->shost_state == SHOST_DEL_RECOVERY ||
+		shost->tmf_in_progress;
 }
 
 extern int scsi_queue_work(struct Scsi_Host *, struct work_struct *);

include/scsi/scsi_transport_iscsi.h

@@ -34,6 +34,7 @@ struct iscsi_cls_conn;
 struct iscsi_conn;
 struct iscsi_cmd_task;
 struct iscsi_mgmt_task;
+struct sockaddr;
 
 /**
  * struct iscsi_transport - iSCSI Transport template
@@ -46,7 +47,12 @@ struct iscsi_mgmt_task;
  * @bind_conn:		associate this connection with existing iSCSI session
  *			and specified transport descriptor
  * @destroy_conn:	destroy inactive iSCSI connection
- * @set_param:		set iSCSI Data-Path operational parameter
+ * @set_param:		set iSCSI parameter. Return 0 on success, -ENODATA
+ *			when param is not supported, and a -Exx value on other
+ *			error.
+ * @get_param		get iSCSI parameter. Must return number of bytes
+ *			copied to buffer on success, -ENODATA when param
+ *			is not supported, and a -Exx value on other error
  * @start_conn:		set connection to be operational
  * @stop_conn:		suspend/recover/terminate connection
  * @send_pdu:		send iSCSI PDU, Login, Logout, NOP-Out, Reject, Text.
@@ -97,15 +103,11 @@ struct iscsi_transport {
 	void (*stop_conn) (struct iscsi_cls_conn *conn, int flag);
 	void (*destroy_conn) (struct iscsi_cls_conn *conn);
 	int (*set_param) (struct iscsi_cls_conn *conn, enum iscsi_param param,
-			  uint32_t value);
+			  char *buf, int buflen);
 	int (*get_conn_param) (struct iscsi_cls_conn *conn,
-			       enum iscsi_param param, uint32_t *value);
+			       enum iscsi_param param, char *buf);
 	int (*get_session_param) (struct iscsi_cls_session *session,
-				  enum iscsi_param param, uint32_t *value);
-	int (*get_conn_str_param) (struct iscsi_cls_conn *conn,
-				   enum iscsi_param param, char *buf);
-	int (*get_session_str_param) (struct iscsi_cls_session *session,
-				      enum iscsi_param param, char *buf);
+				  enum iscsi_param param, char *buf);
 	int (*send_pdu) (struct iscsi_cls_conn *conn, struct iscsi_hdr *hdr,
 			 char *data, uint32_t data_size);
 	void (*get_stats) (struct iscsi_cls_conn *conn,
@@ -127,6 +129,8 @@ struct iscsi_transport {
 			   uint64_t *ep_handle);
 	int (*ep_poll) (uint64_t ep_handle, int timeout_ms);
 	void (*ep_disconnect) (uint64_t ep_handle);
+	int (*tgt_dscvr) (enum iscsi_tgt_dscvr type, uint32_t host_no,
+			  uint32_t enable, struct sockaddr *dst_addr);
 };
 
 /*
@@ -155,13 +159,6 @@ struct iscsi_cls_conn {
 	struct iscsi_transport *transport;
 	uint32_t cid;			/* connection id */
 
-	/* portal/group values we got during discovery */
-	char *persistent_address;
-	int persistent_port;
-	/* portal/group values we are currently using */
-	char *address;
-	int port;
-
 	int active;			/* must be accessed with the connlock */
 	struct device dev;		/* sysfs transport/container device */
 	struct mempool_zone *z_error;
@@ -185,16 +182,11 @@ struct iscsi_cls_session {
 	struct list_head host_list;
 	struct iscsi_transport *transport;
 
-	/* iSCSI values used as unique id by userspace. */
-	char *targetname;
-	int tpgt;
-
 	/* recovery fields */
 	int recovery_tmo;
 	struct work_struct recovery_work;
 
 	int target_id;
-	int channel;
 
 	int sid;				/* session id */
 	void *dd_data;				/* LLD private data */
@@ -207,8 +199,10 @@ struct iscsi_cls_session {
 #define iscsi_session_to_shost(_session) \
 	dev_to_shost(_session->dev.parent)
 
+#define starget_to_session(_stgt) \
+	iscsi_dev_to_session(_stgt->dev.parent)
+
 struct iscsi_host {
-	int next_target_id;
 	struct list_head sessions;
 	struct mutex mutex;
 };
@@ -216,8 +210,17 @@ struct iscsi_host {
 /*
  * session and connection functions that can be used by HW iSCSI LLDs
  */
+extern struct iscsi_cls_session *iscsi_alloc_session(struct Scsi_Host *shost,
+					struct iscsi_transport *transport);
+extern int iscsi_add_session(struct iscsi_cls_session *session,
+			     unsigned int target_id);
+extern int iscsi_if_create_session_done(struct iscsi_cls_conn *conn);
+extern int iscsi_if_destroy_session_done(struct iscsi_cls_conn *conn);
 extern struct iscsi_cls_session *iscsi_create_session(struct Scsi_Host *shost,
-				struct iscsi_transport *t, int channel);
+						struct iscsi_transport *t,
+						unsigned int target_id);
+extern void iscsi_remove_session(struct iscsi_cls_session *session);
+extern void iscsi_free_session(struct iscsi_cls_session *session);
 extern int iscsi_destroy_session(struct iscsi_cls_session *session);
 extern struct iscsi_cls_conn *iscsi_create_conn(struct iscsi_cls_session *sess,
 					    uint32_t cid);
@@ -225,4 +228,5 @@ extern int iscsi_destroy_conn(struct iscsi_cls_conn *conn);
 extern void iscsi_unblock_session(struct iscsi_cls_session *session);
 extern void iscsi_block_session(struct iscsi_cls_session *session);
 
+
 #endif

include/scsi/scsi_transport_sas.h

@@ -3,6 +3,7 @@
 
 #include <linux/transport_class.h>
 #include <linux/types.h>
+#include <linux/mutex.h>
 
 struct scsi_transport_template;
 struct sas_rphy;
@@ -55,7 +56,6 @@ struct sas_phy {
 	enum sas_linkrate	minimum_linkrate;
 	enum sas_linkrate	maximum_linkrate_hw;
 	enum sas_linkrate	maximum_linkrate;
-	u8			port_identifier;
 
 	/* internal state */
 	unsigned int		local_attached : 1;
@@ -66,8 +66,8 @@ struct sas_phy {
 	u32			loss_of_dword_sync_count;
 	u32			phy_reset_problem_count;
 
-	/* the other end of the link */
-	struct sas_rphy		*rphy;
+	/* for the list of phys belonging to a port */
+	struct list_head	port_siblings;
 };
 
 #define dev_to_phy(d) \
@@ -124,6 +124,24 @@ struct sas_expander_device {
 #define rphy_to_expander_device(r) \
 	container_of((r), struct sas_expander_device, rphy)
 
+struct sas_port {
+	struct device		dev;
+
+	u8			port_identifier;
+	int			num_phys;
+
+	/* the other end of the link */
+	struct sas_rphy		*rphy;
+
+	struct mutex		phy_list_mutex;
+	struct list_head	phy_list;
+};
+
+#define dev_to_sas_port(d) \
+	container_of((d), struct sas_port, dev)
+#define transport_class_to_sas_port(cdev) \
+	dev_to_sas_port((cdev)->dev)
+
 /* The functions by which the transport class and the driver communicate */
 struct sas_function_template {
 	int (*get_linkerrors)(struct sas_phy *);
@@ -133,6 +151,7 @@ struct sas_function_template {
 };
 
 
+void sas_remove_children(struct device *);
 extern void sas_remove_host(struct Scsi_Host *);
 
 extern struct sas_phy *sas_phy_alloc(struct device *, int);
@@ -141,13 +160,21 @@ extern int sas_phy_add(struct sas_phy *);
 extern void sas_phy_delete(struct sas_phy *);
 extern int scsi_is_sas_phy(const struct device *);
 
-extern struct sas_rphy *sas_end_device_alloc(struct sas_phy *);
-extern struct sas_rphy *sas_expander_alloc(struct sas_phy *, enum sas_device_type);
+extern struct sas_rphy *sas_end_device_alloc(struct sas_port *);
+extern struct sas_rphy *sas_expander_alloc(struct sas_port *, enum sas_device_type);
 void sas_rphy_free(struct sas_rphy *);
 extern int sas_rphy_add(struct sas_rphy *);
 extern void sas_rphy_delete(struct sas_rphy *);
 extern int scsi_is_sas_rphy(const struct device *);
 
+struct sas_port *sas_port_alloc(struct device *, int);
+int sas_port_add(struct sas_port *);
+void sas_port_free(struct sas_port *);
+void sas_port_delete(struct sas_port *);
+void sas_port_add_phy(struct sas_port *, struct sas_phy *);
+void sas_port_delete_phy(struct sas_port *, struct sas_phy *);
+int scsi_is_sas_port(const struct device *);
+
 extern struct scsi_transport_template *
 sas_attach_transport(struct sas_function_template *);
 extern void sas_release_transport(struct scsi_transport_template *);