ARM: EXYNOS: DT Support for SATA and SATA PHY

This patch adds Device Nodes for SATA and SATA PHY device.

Signed-off-by: Vasanth Ananthan <vasanth.a@samsung.com>
[kgene.kim@samsung.com: removed address definitions as per comments]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

Documentation/devicetree/bindings/ata/exynos-sata-phy.txt

@@ -0,0 +1,14 @@
+* Samsung SATA PHY Controller
+
+SATA PHY nodes are defined to describe on-chip SATA Physical layer controllers.
+Each SATA PHY controller should have its own node.
+
+Required properties:
+- compatible        : compatible list, contains "samsung,exynos5-sata-phy"
+- reg               : <registers mapping>
+
+Example:
+        sata@ffe07000 {
+                compatible = "samsung,exynos5-sata-phy";
+                reg = <0xffe07000 0x1000>;
+        };

Documentation/devicetree/bindings/ata/exynos-sata.txt

@@ -0,0 +1,17 @@
+* Samsung AHCI SATA Controller
+
+SATA nodes are defined to describe on-chip Serial ATA controllers.
+Each SATA controller should have its own node.
+
+Required properties:
+- compatible        : compatible list, contains "samsung,exynos5-sata"
+- interrupts        : <interrupt mapping for SATA IRQ>
+- reg               : <registers mapping>
+- samsung,sata-freq : <frequency in MHz>
+
+Example:
+        sata@ffe08000 {
+                compatible = "samsung,exynos5-sata";
+                reg = <0xffe08000 0x1000>;
+                interrupts = <115>;
+        };

arch/arm/boot/dts/exynos5250-smdk5250.dts

@@ -55,6 +55,21 @@
 		};
 	};
 
+	i2c@121D0000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <40000>;
+		samsung,i2c-slave-addr = <0x38>;
+
+		sata-phy {
+			compatible = "samsung,sata-phy";
+			reg = <0x38>;
+		};
+	};
+
+	sata@122F0000 {
+		samsung,sata-freq = <66>;
+	};
+
 	i2c@12C80000 {
 		status = "disabled";
 	};

arch/arm/boot/dts/exynos5250.dtsi

@@ -104,6 +104,17 @@
 		interrupts = <0 54 0>;
 	};
 
+	sata@122F0000 {
+		compatible = "samsung,exynos5-sata-ahci";
+		reg = <0x122F0000 0x1ff>;
+		interrupts = <0 115 0>;
+	};
+
+	sata-phy@12170000 {
+		compatible = "samsung,exynos5-sata-phy";
+		reg = <0x12170000 0x1ff>;
+	};
+
 	i2c@12C60000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12C60000 0x100>;
@@ -168,6 +179,13 @@
 		#size-cells = <0>;
 	};
 
+	i2c@121D0000 {
+                compatible = "samsung,exynos5-sata-phy-i2c";
+                reg = <0x121D0000 0x100>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+	};
+
 	spi_0: spi@12d20000 {
 		compatible = "samsung,exynos4210-spi";
 		reg = <0x12d20000 0x100>;

arch/arm/mach-exynos/mach-exynos5-dt.c

@@ -64,6 +64,12 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = {
 				"exynos4210-spi.1", NULL),
 	OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI2,
 				"exynos4210-spi.2", NULL),
+	OF_DEV_AUXDATA("samsung,exynos5-sata-ahci", 0x122F0000,
+				"exynos5-sata", NULL),
+	OF_DEV_AUXDATA("samsung,exynos5-sata-phy", 0x12170000,
+				"exynos5-sata-phy", NULL),
+	OF_DEV_AUXDATA("samsung,exynos5-sata-phy-i2c", 0x121D0000,
+				"exynos5-sata-phy-i2c", NULL),
 	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL),
 	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL),
 	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_MDMA1, "dma-pl330.2", NULL),