merge by hand (scsi_device.h)

drivers/block/scsi_ioctl.c

@@ -328,11 +328,6 @@ static int sg_io(struct file *file, request_queue_t *q,
 	return 0;
 }
 
-#define FORMAT_UNIT_TIMEOUT		(2 * 60 * 60 * HZ)
-#define START_STOP_TIMEOUT		(60 * HZ)
-#define MOVE_MEDIUM_TIMEOUT		(5 * 60 * HZ)
-#define READ_ELEMENT_STATUS_TIMEOUT	(5 * 60 * HZ)
-#define READ_DEFECT_DATA_TIMEOUT	(60 * HZ )
 #define OMAX_SB_LEN 16          /* For backward compatibility */
 
 static int sg_scsi_ioctl(struct file *file, request_queue_t *q,

drivers/message/i2o/i2o_config.c

@@ -54,6 +54,9 @@
 
 extern int i2o_parm_issue(struct i2o_device *, int, void *, int, void *, int);
 
+static int i2o_cfg_ioctl(struct inode *inode, struct file *fp, unsigned int cmd,
+			 unsigned long arg);
+
 static spinlock_t i2o_config_lock;
 
 #define MODINC(x,y) ((x) = ((x) + 1) % (y))
@@ -538,8 +541,7 @@ static int i2o_cfg_evt_get(unsigned long arg, struct file *fp)
 }
 
 #ifdef CONFIG_COMPAT
-static int i2o_cfg_passthru32(unsigned fd, unsigned cmnd, unsigned long arg,
-			      struct file *file)
+static int i2o_cfg_passthru32(struct file *file, unsigned cmnd, unsigned long arg)
 {
 	struct i2o_cmd_passthru32 __user *cmd;
 	struct i2o_controller *c;
@@ -752,7 +754,26 @@ static int i2o_cfg_passthru32(unsigned fd, unsigned cmnd, unsigned long arg,
 	return rcode;
 }
 
-#else
+static long i2o_cfg_compat_ioctl(struct file *file, unsigned cmd, unsigned long arg)
+{
+	int ret;
+	lock_kernel();		
+	switch (cmd) { 
+	case I2OGETIOPS:
+		ret = i2o_cfg_ioctl(NULL, file, cmd, arg);
+		break;
+	case I2OPASSTHRU32:
+		ret = i2o_cfg_passthru32(file, cmd, arg);
+		break;
+	default:
+		ret = -ENOIOCTLCMD;
+		break;
+	}
+	unlock_kernel();
+	return ret;
+}
+
+#endif
 
 static int i2o_cfg_passthru(unsigned long arg)
 {
@@ -958,7 +979,6 @@ static int i2o_cfg_passthru(unsigned long arg)
 	kfree(reply);
 	return rcode;
 }
-#endif
 
 /*
  * IOCTL Handler
@@ -1013,11 +1033,9 @@ static int i2o_cfg_ioctl(struct inode *inode, struct file *fp, unsigned int cmd,
 		ret = i2o_cfg_evt_get(arg, fp);
 		break;
 
-#ifndef CONFIG_COMPAT
 	case I2OPASSTHRU:
 		ret = i2o_cfg_passthru(arg);
 		break;
-#endif
 
 	default:
 		osm_debug("unknown ioctl called!\n");
@@ -1105,6 +1123,9 @@ static struct file_operations config_fops = {
 	.owner = THIS_MODULE,
 	.llseek = no_llseek,
 	.ioctl = i2o_cfg_ioctl,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl = i2o_cfg_compat_ioctl,
+#endif
 	.open = cfg_open,
 	.release = cfg_release,
 	.fasync = cfg_fasync,
@@ -1134,19 +1155,11 @@ static int __init i2o_config_init(void)
 		misc_deregister(&i2o_miscdev);
 		return -EBUSY;
 	}
-#ifdef CONFIG_COMPAT
-	register_ioctl32_conversion(I2OPASSTHRU32, i2o_cfg_passthru32);
-	register_ioctl32_conversion(I2OGETIOPS, (void *)sys_ioctl);
-#endif
 	return 0;
 }
 
 static void i2o_config_exit(void)
 {
-#ifdef CONFIG_COMPAT
-	unregister_ioctl32_conversion(I2OPASSTHRU32);
-	unregister_ioctl32_conversion(I2OGETIOPS);
-#endif
 	misc_deregister(&i2o_miscdev);
 	i2o_driver_unregister(&i2o_config_driver);
 }

drivers/s390/scsi/zfcp_aux.c

@@ -88,10 +88,10 @@ MODULE_DESCRIPTION
     ("FCP (SCSI over Fibre Channel) HBA driver for IBM eServer zSeries");
 MODULE_LICENSE("GPL");
 
-module_param(device, charp, 0);
+module_param(device, charp, 0400);
 MODULE_PARM_DESC(device, "specify initial device");
 
-module_param(loglevel, uint, 0);
+module_param(loglevel, uint, 0400);
 MODULE_PARM_DESC(loglevel,
 		 "log levels, 8 nibbles: "
 		 "FC ERP QDIO CIO Config FSF SCSI Other, "

drivers/s390/scsi/zfcp_def.h

@@ -70,7 +70,7 @@
 /********************* GENERAL DEFINES *********************************/
 
 /* zfcp version number, it consists of major, minor, and patch-level number */
-#define ZFCP_VERSION		"4.2.0"
+#define ZFCP_VERSION		"4.3.0"
 
 /**
  * zfcp_sg_to_address - determine kernel address from struct scatterlist
@@ -851,6 +851,9 @@ struct zfcp_adapter {
 	wwn_t			wwnn;	           /* WWNN */
 	wwn_t			wwpn;	           /* WWPN */
 	fc_id_t			s_id;	           /* N_Port ID */
+	wwn_t			peer_wwnn;	   /* P2P peer WWNN */
+	wwn_t			peer_wwpn;	   /* P2P peer WWPN */
+	fc_id_t			peer_d_id;	   /* P2P peer D_ID */
 	struct ccw_device       *ccw_device;	   /* S/390 ccw device */
 	u8			fc_service_class;
 	u32			fc_topology;	   /* FC topology */

drivers/s390/scsi/zfcp_erp.c

@@ -2568,6 +2568,23 @@ zfcp_erp_port_strategy_open_common(struct zfcp_erp_action *erp_action)
 	case ZFCP_ERP_STEP_UNINITIALIZED:
 	case ZFCP_ERP_STEP_PHYS_PORT_CLOSING:
 	case ZFCP_ERP_STEP_PORT_CLOSING:
+		if (adapter->fc_topology == FSF_TOPO_P2P) {
+			if (port->wwpn != adapter->peer_wwpn) {
+				ZFCP_LOG_NORMAL("Failed to open port 0x%016Lx "
+						"on adapter %s.\nPeer WWPN "
+						"0x%016Lx does not match\n",
+						port->wwpn,
+						zfcp_get_busid_by_adapter(adapter),
+						adapter->peer_wwpn);
+				zfcp_erp_port_failed(port);
+				retval = ZFCP_ERP_FAILED;
+				break;
+			}
+			port->d_id = adapter->peer_d_id;
+			atomic_set_mask(ZFCP_STATUS_PORT_DID_DID, &port->status);
+			retval = zfcp_erp_port_strategy_open_port(erp_action);
+			break;
+		}
 		if (!(adapter->nameserver_port)) {
 			retval = zfcp_nameserver_enqueue(adapter);
 			if (retval != 0) {
@@ -3516,8 +3533,9 @@ zfcp_erp_adapter_access_changed(struct zfcp_adapter *adapter)
 	debug_text_event(adapter->erp_dbf, 3, "a_access_unblock");
 	debug_event(adapter->erp_dbf, 3, &adapter->name, 8);
 
-	zfcp_erp_port_access_changed(adapter->nameserver_port);
 	read_lock_irqsave(&zfcp_data.config_lock, flags);
+	if (adapter->nameserver_port)
+		zfcp_erp_port_access_changed(adapter->nameserver_port);
 	list_for_each_entry(port, &adapter->port_list_head, list)
 		if (port != adapter->nameserver_port)
 			zfcp_erp_port_access_changed(port);

drivers/s390/scsi/zfcp_fsf.c

@@ -2107,6 +2107,9 @@ zfcp_fsf_exchange_config_evaluate(struct zfcp_fsf_req *fsf_req, int xchg_ok)
 		       bottom->low_qtcb_version, bottom->high_qtcb_version);
 	adapter->fsf_lic_version = bottom->lic_version;
 	adapter->supported_features = bottom->supported_features;
+	adapter->peer_wwpn = 0;
+	adapter->peer_wwnn = 0;
+	adapter->peer_d_id = 0;
 
 	if (xchg_ok) {
 		adapter->wwnn = bottom->nport_serv_param.wwnn;
@@ -2124,13 +2127,19 @@ zfcp_fsf_exchange_config_evaluate(struct zfcp_fsf_req *fsf_req, int xchg_ok)
 		adapter->hydra_version = 0;
 	}
 
+	if (adapter->fc_topology == FSF_TOPO_P2P) {
+		adapter->peer_d_id = bottom->peer_d_id & ZFCP_DID_MASK;
+		adapter->peer_wwpn = bottom->plogi_payload.wwpn;
+		adapter->peer_wwnn = bottom->plogi_payload.wwnn;
+	}
+
 	if(adapter->supported_features & FSF_FEATURE_HBAAPI_MANAGEMENT){
 		adapter->hardware_version = bottom->hardware_version;
 		memcpy(adapter->serial_number, bottom->serial_number, 17);
 		EBCASC(adapter->serial_number, sizeof(adapter->serial_number));
 	}
 
-	ZFCP_LOG_INFO("The adapter %s reported the following characteristics:\n"
+	ZFCP_LOG_NORMAL("The adapter %s reported the following characteristics:\n"
 		      "WWNN 0x%016Lx, "
 		      "WWPN 0x%016Lx, "
 		      "S_ID 0x%08x,\n"
@@ -2194,14 +2203,18 @@ zfcp_fsf_exchange_config_data_handler(struct zfcp_fsf_req *fsf_req)
 		switch (adapter->fc_topology) {
 		case FSF_TOPO_P2P:
 			ZFCP_LOG_FLAGS(1, "FSF_TOPO_P2P\n");
-			ZFCP_LOG_NORMAL("error: Point-to-point fibrechannel "
-					"configuration detected at adapter %s "
-					"unsupported, shutting down adapter\n",
-					zfcp_get_busid_by_adapter(adapter));
+			ZFCP_LOG_NORMAL("Point-to-Point fibrechannel "
+					"configuration detected at adapter %s\n"
+					"Peer WWNN 0x%016llx, "
+					"peer WWPN 0x%016llx, "
+					"peer d_id 0x%06x\n",
+					zfcp_get_busid_by_adapter(adapter),
+					adapter->peer_wwnn,
+					adapter->peer_wwpn,
+					adapter->peer_d_id);
 			debug_text_event(fsf_req->adapter->erp_dbf, 0,
 					 "top-p-to-p");
-			zfcp_erp_adapter_shutdown(adapter, 0);
-			return -EIO;
+			break;
 		case FSF_TOPO_AL:
 			ZFCP_LOG_FLAGS(1, "FSF_TOPO_AL\n");
 			ZFCP_LOG_NORMAL("error: Arbitrated loop fibrechannel "
@@ -2226,6 +2239,7 @@ zfcp_fsf_exchange_config_data_handler(struct zfcp_fsf_req *fsf_req)
 					"of a type known to the zfcp "
 					"driver, shutting down adapter\n",
 					zfcp_get_busid_by_adapter(adapter));
+			adapter->fc_topology = FSF_TOPO_ERROR;
 			debug_text_exception(fsf_req->adapter->erp_dbf, 0,
 					     "unknown-topo");
 			zfcp_erp_adapter_shutdown(adapter, 0);
@@ -4281,6 +4295,7 @@ zfcp_fsf_send_fcp_command_task_handler(struct zfcp_fsf_req *fsf_req)
 				      bottom.io.fcp_cmnd, FSF_FCP_CMND_SIZE);
 			zfcp_cmd_dbf_event_fsf("undeffcp", fsf_req, NULL, 0);
 			set_host_byte(&scpnt->result, DID_ERROR);
+			goto skip_fsfstatus;
 		}
 	}
 
@@ -4334,7 +4349,7 @@ zfcp_fsf_send_fcp_command_task_handler(struct zfcp_fsf_req *fsf_req)
 
 		scpnt->resid = fcp_rsp_iu->fcp_resid;
 		if (scpnt->request_bufflen - scpnt->resid < scpnt->underflow)
-			scpnt->result |= DID_ERROR << 16;
+			set_host_byte(&scpnt->result, DID_ERROR);
 	}
 
  skip_fsfstatus:
@@ -4607,6 +4622,13 @@ zfcp_fsf_control_file_handler(struct zfcp_fsf_req *fsf_req)
 		if (bottom->operation_subtype == FSF_CFDC_OPERATION_SUBTYPE) {
 			switch (header->fsf_status_qual.word[0]) {
 
+			case FSF_SQ_CFDC_HARDENED_ON_SE:
+				ZFCP_LOG_NORMAL(
+					"CFDC on the adapter %s has being "
+					"hardened on primary and secondary SE\n",
+					zfcp_get_busid_by_adapter(adapter));
+				break;
+
 			case FSF_SQ_CFDC_COULD_NOT_HARDEN_ON_SE:
 				ZFCP_LOG_NORMAL(
 					"CFDC of the adapter %s could not "

drivers/s390/scsi/zfcp_fsf.h

@@ -129,6 +129,7 @@
 #define FSF_SQ_NO_RETRY_POSSIBLE		0x07
 
 /* FSF status qualifier for CFDC commands */
+#define FSF_SQ_CFDC_HARDENED_ON_SE		0x00000000
 #define FSF_SQ_CFDC_COULD_NOT_HARDEN_ON_SE	0x00000001
 #define FSF_SQ_CFDC_COULD_NOT_HARDEN_ON_SE2	0x00000002
 /* CFDC subtable codes */
@@ -357,7 +358,6 @@ struct fsf_nport_serv_param {
 	u8  class3_serv_param[16];
 	u8  class4_serv_param[16];
 	u8  vendor_version_level[16];
-	u8  res1[16];
 } __attribute__ ((packed));
 
 struct fsf_plogi {
@@ -415,11 +415,13 @@ struct fsf_qtcb_bottom_config {
 	u8 res2[12];
 	u32 s_id;
 	struct fsf_nport_serv_param nport_serv_param;
+	u8 reserved_nport_serv_param[16];
 	u8 res3[8];
 	u32 adapter_ports;
 	u32 hardware_version;
 	u8 serial_number[32];
-	u8 res4[272];
+	struct fsf_nport_serv_param plogi_payload;
+	u8 res4[160];
 } __attribute__ ((packed));
 
 struct fsf_qtcb_bottom_port {

drivers/s390/scsi/zfcp_sysfs_adapter.c

@@ -65,6 +65,9 @@ ZFCP_DEFINE_ADAPTER_ATTR(status, "0x%08x\n", atomic_read(&adapter->status));
 ZFCP_DEFINE_ADAPTER_ATTR(wwnn, "0x%016llx\n", adapter->wwnn);
 ZFCP_DEFINE_ADAPTER_ATTR(wwpn, "0x%016llx\n", adapter->wwpn);
 ZFCP_DEFINE_ADAPTER_ATTR(s_id, "0x%06x\n", adapter->s_id);
+ZFCP_DEFINE_ADAPTER_ATTR(peer_wwnn, "0x%016llx\n", adapter->peer_wwnn);
+ZFCP_DEFINE_ADAPTER_ATTR(peer_wwpn, "0x%016llx\n", adapter->peer_wwpn);
+ZFCP_DEFINE_ADAPTER_ATTR(peer_d_id, "0x%06x\n", adapter->peer_d_id);
 ZFCP_DEFINE_ADAPTER_ATTR(card_version, "0x%04x\n", adapter->hydra_version);
 ZFCP_DEFINE_ADAPTER_ATTR(lic_version, "0x%08x\n", adapter->fsf_lic_version);
 ZFCP_DEFINE_ADAPTER_ATTR(fc_link_speed, "%d Gb/s\n", adapter->fc_link_speed);
@@ -255,6 +258,9 @@ static struct attribute *zfcp_adapter_attrs[] = {
 	&dev_attr_wwnn.attr,
 	&dev_attr_wwpn.attr,
 	&dev_attr_s_id.attr,
+	&dev_attr_peer_wwnn.attr,
+	&dev_attr_peer_wwpn.attr,
+	&dev_attr_peer_d_id.attr,
 	&dev_attr_card_version.attr,
 	&dev_attr_lic_version.attr,
 	&dev_attr_fc_link_speed.attr,

drivers/scsi/53c7xx.c

@@ -280,6 +280,7 @@
 #endif
 
 #include "scsi.h"
+#include <scsi/scsi_dbg.h>
 #include <scsi/scsi_host.h>
 #include "53c7xx.h"
 #include <linux/stat.h>
@@ -1721,9 +1722,9 @@ NCR53c7xx_run_tests (struct Scsi_Host *host) {
 		printk ("scsi%d : test 2 INQUIRY to target %d, lun 0 : %s\n",
 		    host->host_no, i, data + 8);
 		printk ("scsi%d : status ", host->host_no);
-		print_status (status);
+		scsi_print_status (status);
 		printk ("\nscsi%d : message ", host->host_no);
-		print_msg (&msg);
+		scsi_print_msg (&msg);
 		printk ("\n");
 	    } else if (hostdata->test_completed == 3) {
 		printk("scsi%d : test 2 no connection with target %d\n",
@@ -2312,7 +2313,7 @@ NCR53c7x0_dstat_sir_intr (struct Scsi_Host *host, struct
 	    printk ("scsi%d : received message", host->host_no);
 	    if (c) 
 	    	printk (" from target %d lun %d ", c->device->id, c->device->lun);
-	    print_msg ((unsigned char *) hostdata->msg_buf);
+	    scsi_print_msg ((unsigned char *) hostdata->msg_buf);
 	    printk("\n");
 	}
 	
@@ -3204,7 +3205,7 @@ create_cmd (Scsi_Cmnd *cmd) {
     case WRITE_10:
 #if 0
 	printk("scsi%d : command is ", host->host_no);
-	print_command(cmd->cmnd);
+	__scsi_print_command(cmd->cmnd);
 #endif
 #if 0
 	printk ("scsi%d : %d scatter/gather segments\n", host->host_no,
@@ -3232,7 +3233,7 @@ create_cmd (Scsi_Cmnd *cmd) {
      */
     default:
 	printk("scsi%d : datain+dataout for command ", host->host_no);
-	print_command(cmd->cmnd);
+	__scsi_print_command(cmd->cmnd);
 	datain = dataout = 2 * (cmd->use_sg ? cmd->use_sg : 1) + 3;
     }
 
@@ -3938,7 +3939,7 @@ intr_scsi (struct Scsi_Host *host, struct NCR53c7x0_cmd *cmd) {
     	    if (cmd) {
     	    	printk("scsi%d : target %d, lun %d, command ",
 		    host->host_no, cmd->cmd->device->id, cmd->cmd->device->lun);
-    	    	print_command (cmd->cmd->cmnd);
+    	    	__scsi_print_command (cmd->cmd->cmnd);
 		printk("scsi%d : dsp = 0x%x (virt 0x%p)\n", host->host_no,
 		    NCR53c7x0_read32(DSP_REG),
 		    bus_to_virt(NCR53c7x0_read32(DSP_REG)));
@@ -4208,7 +4209,7 @@ restart:
 	if (hostdata->options & OPTION_DEBUG_INTR) {
 	    printk ("scsi%d : command complete : pid %lu, id %d,lun %d result 0x%x ", 
 		  host->host_no, tmp->pid, tmp->device->id, tmp->device->lun, tmp->result);
-	    print_command (tmp->cmnd);
+	    __scsi_print_command (tmp->cmnd);
 	}
 
 	tmp->scsi_done(tmp);
@@ -4297,7 +4298,7 @@ NCR53c7x0_intr (int irq, void *dev_id, struct pt_regs * regs)
 		printk("scsi%d : interrupt for pid %lu, id %d, lun %d ", 
 		    host->host_no, cmd->cmd->pid, (int) cmd->cmd->device->id,
 		    (int) cmd->cmd->device->lun);
-		print_command (cmd->cmd->cmnd);
+		__scsi_print_command (cmd->cmd->cmnd);
 	    } else {
 		printk("scsi%d : no active command\n", host->host_no);
 	    }
@@ -5539,7 +5540,7 @@ print_dsa (struct Scsi_Host *host, u32 *dsa, const char *prefix) {
 	    i > 0 && !check_address ((unsigned long) ptr, 1);
 	    ptr += len, i -= len) {
 	    printk("               ");
-	    len = print_msg (ptr);
+	    len = scsi_print_msg (ptr);
 	    printk("\n");
 	    if (!len)
 		break;
@@ -5554,7 +5555,7 @@ print_dsa (struct Scsi_Host *host, u32 *dsa, const char *prefix) {
     if (cmd) {
 	printk("               result = 0x%x, target = %d, lun = %d, cmd = ",
 	    cmd->result, cmd->device->id, cmd->device->lun);
-	print_command(cmd->cmnd);
+	__scsi_print_command(cmd->cmnd);
     } else
 	printk("\n");
     printk("        + %d : dsa_next = 0x%x\n", hostdata->dsa_next,
@@ -6028,7 +6029,7 @@ dump_events (struct Scsi_Host *host, int count) {
 		    virt_to_bus(event.dsa), event.dsa);
 	    if (event.pid != -1) {
 		printk ("         event for pid %ld ", event.pid);
-		print_command (event.cmnd);
+		__scsi_print_command (event.cmnd);
 	    }
 	}
     }

drivers/scsi/BusLogic.c

@@ -2957,13 +2957,6 @@ static int BusLogic_AbortCommand(struct scsi_cmnd *Command)
 	int TargetID = Command->device->id;
 	struct BusLogic_CCB *CCB;
 	BusLogic_IncrementErrorCounter(&HostAdapter->TargetStatistics[TargetID].CommandAbortsRequested);
-	/*
-	   If this Command has already completed, then no Abort is necessary.
-	 */
-	if (Command->serial_number != Command->serial_number_at_timeout) {
-		BusLogic_Warning("Unable to Abort Command to Target %d - " "Already Completed\n", HostAdapter, TargetID);
-		return SUCCESS;
-	}
 	/*
 	   Attempt to find an Active CCB for this Command.  If no Active CCB for this
 	   Command is found, then no Abort is necessary.

drivers/scsi/NCR5380.c

@@ -86,6 +86,7 @@
  * 5.  Test linked command handling code after Eric is ready with 
  *      the high level code.
  */
+#include <scsi/scsi_dbg.h>
 
 #if (NDEBUG & NDEBUG_LISTS)
 #define LIST(x,y) {printk("LINE:%d   Adding %p to %p\n", __LINE__, (void*)(x), (void*)(y)); if ((x)==(y)) udelay(5); }
@@ -2371,7 +2372,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) {
  * 3..length+1  arguments
  *
  * Start the extended message buffer with the EXTENDED_MESSAGE
- * byte, since print_msg() wants the whole thing.  
+ * byte, since scsi_print_msg() wants the whole thing.  
  */
 					extended_msg[0] = EXTENDED_MESSAGE;
 					/* Accept first byte by clearing ACK */
@@ -2418,7 +2419,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) {
 				default:
 					if (!tmp) {
 						printk("scsi%d: rejecting message ", instance->host_no);
-						print_msg(extended_msg);
+						scsi_print_msg(extended_msg);
 						printk("\n");
 					} else if (tmp != EXTENDED_MESSAGE)
 						printk("scsi%d: rejecting unknown message %02x from target %d, lun %d\n", instance->host_no, tmp, cmd->device->id, cmd->device->lun);
@@ -2552,7 +2553,7 @@ static void NCR5380_reselect(struct Scsi_Host *instance) {
 
 	if (!(msg[0] & 0x80)) {
 		printk(KERN_ERR "scsi%d : expecting IDENTIFY message, got ", instance->host_no);
-		print_msg(msg);
+		scsi_print_msg(msg);
 		abort = 1;
 	} else {
 		/* Accept message by clearing ACK */
@@ -2677,7 +2678,7 @@ static int NCR5380_abort(Scsi_Cmnd * cmd) {
 	Scsi_Cmnd *tmp, **prev;
 	
 	printk(KERN_WARNING "scsi%d : aborting command\n", instance->host_no);
-	print_Scsi_Cmnd(cmd);
+	scsi_print_command(cmd);
 
 	NCR5380_print_status(instance);
 

drivers/scsi/advansys.c

@@ -9198,16 +9198,13 @@ asc_prt_scsi_cmnd(struct scsi_cmnd *s)
         s->use_sg, s->sglist_len, s->abort_reason);
 
     printk(
-" serial_number 0x%x, serial_number_at_timeout 0x%x, retries %d, allowed %d\n",
-        (unsigned) s->serial_number, (unsigned) s->serial_number_at_timeout,
-         s->retries, s->allowed);
+" serial_number 0x%x, retries %d, allowed %d\n",
+        (unsigned) s->serial_number, s->retries, s->allowed);
 
     printk(
 " timeout_per_command %d, timeout_total %d, timeout %d\n",
         s->timeout_per_command, s->timeout_total, s->timeout);
 
-    printk(" internal_timeout %u\n", s->internal_timeout);
-
     printk(
 " scsi_done 0x%lx, done 0x%lx, host_scribble 0x%lx, result 0x%x\n",
         (ulong) s->scsi_done, (ulong) s->done,

drivers/scsi/aha152x.c

@@ -257,6 +257,7 @@
 #include <scsi/scsicam.h>
 
 #include "scsi.h"
+#include <scsi/scsi_dbg.h>
 #include <scsi/scsi_host.h>
 #include "aha152x.h"
 
@@ -986,7 +987,7 @@ static int aha152x_internal_queue(Scsi_Cmnd *SCpnt, struct semaphore *sem, int p
 	if (HOSTDATA(shpnt)->debug & debug_queue) {
 		printk(INFO_LEAD "queue: %p; cmd_len=%d pieces=%d size=%u cmnd=",
 		       CMDINFO(SCpnt), SCpnt, SCpnt->cmd_len, SCpnt->use_sg, SCpnt->request_bufflen);
-		print_command(SCpnt->cmnd);
+		__scsi_print_command(SCpnt->cmnd);
 	}
 #endif
 
@@ -1560,7 +1561,7 @@ static void busfree_run(struct Scsi_Host *shpnt)
 #if 0
 			if(HOSTDATA(shpnt)->debug & debug_eh) {
 				printk(ERR_LEAD "received sense: ", CMDINFO(DONE_SC));
-				print_sense("bh", DONE_SC);
+				scsi_print_sense("bh", DONE_SC);
 			}
 #endif
 
@@ -1846,7 +1847,7 @@ static void msgi_run(struct Scsi_Host *shpnt)
 #if defined(AHA152X_DEBUG)
 		if (HOSTDATA(shpnt)->debug & debug_msgi) {
 			printk(INFO_LEAD "inbound message %02x ", CMDINFO(CURRENT_SC), MSGI(0));
-			print_msg(&MSGI(0));
+			scsi_print_msg(&MSGI(0));
 			printk("\n");
 		}
 #endif
@@ -1934,7 +1935,7 @@ static void msgi_run(struct Scsi_Host *shpnt)
 						break;
 
 					printk(INFO_LEAD, CMDINFO(CURRENT_SC));
-					print_msg(&MSGI(0));
+					scsi_print_msg(&MSGI(0));
 					printk("\n");
 
 					ticks = (MSGI(3) * 4 + 49) / 50;
@@ -2032,7 +2033,7 @@ static void msgo_init(struct Scsi_Host *shpnt)
 		int i;
 
 		printk(DEBUG_LEAD "messages( ", CMDINFO(CURRENT_SC));
-		for (i=0; i<MSGOLEN; i+=print_msg(&MSGO(i)), printk(" "))
+		for (i=0; i<MSGOLEN; i+=scsi_print_msg(&MSGO(i)), printk(" "))
 			;
 		printk(")\n");
 	}
@@ -2104,7 +2105,7 @@ static void cmd_init(struct Scsi_Host *shpnt)
 #if defined(AHA152X_DEBUG)
 	if (HOSTDATA(shpnt)->debug & debug_cmd) {
 		printk(DEBUG_LEAD "cmd_init: ", CMDINFO(CURRENT_SC));
-		print_command(CURRENT_SC->cmnd);
+		__scsi_print_command(CURRENT_SC->cmnd);
 	}
 #endif
 
@@ -2158,7 +2159,7 @@ static void status_run(struct Scsi_Host *shpnt)
 #if defined(AHA152X_DEBUG)
 	if (HOSTDATA(shpnt)->debug & debug_status) {
 		printk(DEBUG_LEAD "inbound status %02x ", CMDINFO(CURRENT_SC), CURRENT_SC->SCp.Status);
-		print_status(CURRENT_SC->SCp.Status);
+		scsi_print_status(CURRENT_SC->SCp.Status);
 		printk("\n");
 	}
 #endif
@@ -2925,7 +2926,7 @@ static void show_command(Scsi_Cmnd *ptr)
 	printk(KERN_DEBUG "0x%08x: target=%d; lun=%d; cmnd=(",
 	       (unsigned int) ptr, ptr->device->id, ptr->device->lun);
 
-	print_command(ptr->cmnd);
+	__scsi_print_command(ptr->cmnd);
 
 	printk(KERN_DEBUG "); request_bufflen=%d; resid=%d; phase |",
 	       ptr->request_bufflen, ptr->resid);

drivers/scsi/arm/acornscsi.c

@@ -150,6 +150,7 @@
 #include <asm/ecard.h>
 
 #include "../scsi.h"
+#include <scsi/scsi_dbg.h>
 #include <scsi/scsi_host.h>
 #include "acornscsi.h"
 #include "msgqueue.h"
@@ -866,7 +867,7 @@ void acornscsi_done(AS_Host *host, Scsi_Cmnd **SCpntp, unsigned int result)
 		    default:
 			printk(KERN_ERR "scsi%d.H: incomplete data transfer detected: result=%08X command=",
 				host->host->host_no, SCpnt->result);
-			print_command(SCpnt->cmnd);
+			__scsi_print_command(SCpnt->cmnd);
 			acornscsi_dumpdma(host, "done");
 		 	acornscsi_dumplog(host, SCpnt->device->id);
 			SCpnt->result &= 0xffff;
@@ -1369,7 +1370,7 @@ void acornscsi_sendmessage(AS_Host *host)
 
 	host->scsi.last_message = msg->msg[0];
 #if (DEBUG & DEBUG_MESSAGES)
-	print_msg(msg->msg);
+	scsi_print_msg(msg->msg);
 #endif
 	break;
 
@@ -1391,7 +1392,7 @@ void acornscsi_sendmessage(AS_Host *host)
 	while ((msg = msgqueue_getmsg(&host->scsi.msgs, msgnr++)) != NULL) {
 	    unsigned int i;
 #if (DEBUG & DEBUG_MESSAGES)
-	    print_msg(msg);
+	    scsi_print_msg(msg);
 #endif
 	    i = 0;
 	    if (acornscsi_write_pio(host, msg->msg, &i, msg->length, 1000000))
@@ -1487,7 +1488,7 @@ void acornscsi_message(AS_Host *host)
 #if (DEBUG & DEBUG_MESSAGES)
     printk("scsi%d.%c: message in: ",
 	    host->host->host_no, acornscsi_target(host));
-    print_msg(message);
+    scsi_print_msg(message);
     printk("\n");
 #endif
 

drivers/scsi/arm/fas216.c

@@ -52,6 +52,7 @@
 #include <asm/ecard.h>
 
 #include "../scsi.h"
+#include <scsi/scsi_dbg.h>
 #include <scsi/scsi_host.h>
 #include "fas216.h"
 #include "scsi.h"
@@ -309,7 +310,7 @@ fas216_log_command(FAS216_Info *info, int level, Scsi_Cmnd *SCpnt, char *fmt, ..
 	va_end(args);
 
 	printk(" CDB: ");
-	print_command(SCpnt->cmnd);
+	__scsi_print_command(SCpnt->cmnd);
 }
 
 static void
@@ -2081,7 +2082,7 @@ fas216_std_done(FAS216_Info *info, Scsi_Cmnd *SCpnt, unsigned int result)
 				info->host->host_no, '0' + SCpnt->device->id,
 				SCpnt->result, info->scsi.SCp.ptr,
 				info->scsi.SCp.this_residual);
-			print_command(SCpnt->cmnd);
+			__scsi_print_command(SCpnt->cmnd);
 			SCpnt->result &= ~(255 << 16);
 			SCpnt->result |= DID_BAD_TARGET << 16;
 			goto request_sense;
@@ -2170,7 +2171,7 @@ static void fas216_done(FAS216_Info *info, unsigned int result)
 		       info->host->host_no, '0' + SCpnt->device->id,
 		       info->scsi.SCp.ptr, info->scsi.SCp.this_residual);
 		info->scsi.SCp.ptr = NULL;
-		print_command(SCpnt->cmnd);
+		__scsi_print_command(SCpnt->cmnd);
 	}
 
 	/*
@@ -2426,7 +2427,7 @@ int fas216_eh_abort(Scsi_Cmnd *SCpnt)
 	info->stats.aborts += 1;
 
 	printk(KERN_WARNING "scsi%d: abort command ", info->host->host_no);
-	print_command(SCpnt->data_cmnd);
+	__scsi_print_command(SCpnt->data_cmnd);
 
 	print_debug_list();
 	fas216_dumpstate(info);

drivers/scsi/arm/scsi.h

@@ -108,7 +108,7 @@ static inline void init_SCp(Scsi_Cmnd *SCpnt)
 #if 0 //def BELT_AND_BRACES
 		printk(KERN_WARNING "scsi%d.%c: zero length buffer passed for "
 		       "command ", SCpnt->host->host_no, '0' + SCpnt->target);
-		print_command(SCpnt->cmnd);
+		__scsi_print_command(SCpnt->cmnd);
 #endif
 		SCpnt->SCp.ptr = NULL;
 	}

drivers/scsi/atari_NCR5380.c

@@ -73,6 +73,7 @@
  * 1.  Test linked command handling code after Eric is ready with 
  *     the high level code.
  */
+#include <scsi/scsi_dbg.h>
 
 #if (NDEBUG & NDEBUG_LISTS)
 #define LIST(x,y) \
@@ -2354,7 +2355,7 @@ static void NCR5380_information_transfer (struct Scsi_Host *instance)
  * 3..length+1	arguments
  *
  * Start the extended message buffer with the EXTENDED_MESSAGE
- * byte, since print_msg() wants the whole thing.  
+ * byte, since scsi_print_msg() wants the whole thing.  
  */
 		    extended_msg[0] = EXTENDED_MESSAGE;
 		    /* Accept first byte by clearing ACK */
@@ -2407,7 +2408,7 @@ static void NCR5380_information_transfer (struct Scsi_Host *instance)
 		default:
 		    if (!tmp) {
 			printk(KERN_DEBUG "scsi%d: rejecting message ", HOSTNO);
-			print_msg (extended_msg);
+			scsi_print_msg (extended_msg);
 			printk("\n");
 		    } else if (tmp != EXTENDED_MESSAGE)
 			printk(KERN_DEBUG "scsi%d: rejecting unknown "
@@ -2540,7 +2541,7 @@ static void NCR5380_reselect (struct Scsi_Host *instance)
 
     if (!(msg[0] & 0x80)) {
 	printk(KERN_DEBUG "scsi%d: expecting IDENTIFY message, got ", HOSTNO);
-	print_msg(msg);
+	scsi_print_msg(msg);
 	do_abort(instance);
 	return;
     }
@@ -2646,7 +2647,7 @@ int NCR5380_abort (Scsi_Cmnd *cmd)
     unsigned long flags;
 
     printk(KERN_NOTICE "scsi%d: aborting command\n", HOSTNO);
-    print_Scsi_Cmnd (cmd);
+    scsi_print_command(cmd);
 
     NCR5380_print_status (instance);
 

drivers/scsi/constants.c

@@ -372,7 +372,7 @@ static void scsi_print_cdb(unsigned char *cdb, int cdb_len, int start_of_line)
 
 /**
  *
- *	print_status - print scsi status description
+ *	scsi_print_status - print scsi status description
  *	@scsi_status: scsi status value
  *
  *	If the status is recognized, the description is printed.

drivers/scsi/ips.c

@@ -833,13 +833,6 @@ ips_eh_abort(Scsi_Cmnd * SC)
 	if (!ha->active)
 		return (FAILED);
 
-	if (SC->serial_number != SC->serial_number_at_timeout) {
-		/* HMM, looks like a bogus command */
-		DEBUG(1, "Abort called with bogus scsi command");
-
-		return (FAILED);
-	}
-
 	/* See if the command is on the copp queue */
 	item = ha->copp_waitlist.head;
 	while ((item) && (item->scsi_cmd != SC))

drivers/scsi/ncr53c8xx.c

@@ -7486,24 +7486,14 @@ static int ncr53c8xx_abort(struct scsi_cmnd *cmd)
 	struct scsi_cmnd *done_list;
 
 #if defined SCSI_RESET_SYNCHRONOUS && defined SCSI_RESET_ASYNCHRONOUS
-	printk("ncr53c8xx_abort: pid=%lu serial_number=%ld serial_number_at_timeout=%ld\n",
-		cmd->pid, cmd->serial_number, cmd->serial_number_at_timeout);
+	printk("ncr53c8xx_abort: pid=%lu serial_number=%ld\n",
+		cmd->pid, cmd->serial_number);
 #else
 	printk("ncr53c8xx_abort: command pid %lu\n", cmd->pid);
 #endif
 
 	NCR_LOCK_NCB(np, flags);
 
-#if defined SCSI_RESET_SYNCHRONOUS && defined SCSI_RESET_ASYNCHRONOUS
-	/*
-	 * We have to just ignore abort requests in some situations.
-	 */
-	if (cmd->serial_number != cmd->serial_number_at_timeout) {
-		sts = SCSI_ABORT_NOT_RUNNING;
-		goto out;
-	}
-#endif
-
 	sts = ncr_abort_command(np, cmd);
 out:
 	done_list     = np->done_list;

drivers/scsi/pci2000.c

@@ -438,8 +438,8 @@ int Pci2000_QueueCommand (Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *))
 	if ( bus )
 		{
 		DEB (if(*cdb) printk ("\nCDB: %X-  %X %X %X %X %X %X %X %X %X %X ", SCpnt->cmd_len, cdb[0], cdb[1], cdb[2], cdb[3], cdb[4], cdb[5], cdb[6], cdb[7], cdb[8], cdb[9]));
-		DEB (if(*cdb) printk ("\ntimeout_per_command: %d, timeout_total: %d, timeout: %d, internal_timout: %d", SCpnt->timeout_per_command,
-							  SCpnt->timeout_total, SCpnt->timeout, SCpnt->internal_timeout));
+		DEB (if(*cdb) printk ("\ntimeout_per_command: %d, timeout_total: %d, timeout: %d", SCpnt->timeout_per_command,
+							  SCpnt->timeout_total, SCpnt->timeout));
 		outl (SCpnt->timeout_per_command, padapter->mb1);
 		outb_p (CMD_SCSI_TIMEOUT, padapter->cmd);
 		if ( WaitReady (padapter) )

drivers/scsi/qla2xxx/qla_dbg.c

@@ -1050,10 +1050,8 @@ qla2x00_print_scsi_cmd(struct scsi_cmnd * cmd)
 	for (i = 0; i < cmd->cmd_len; i++) {
 		printk("0x%02x ", cmd->cmnd[i]);
 	}
-	printk("\n  seg_cnt=%d, allowed=%d, retries=%d, "
-	    "serial_number_at_timeout=0x%lx\n",
-	    cmd->use_sg, cmd->allowed, cmd->retries,
-	    cmd->serial_number_at_timeout);
+	printk("\n  seg_cnt=%d, allowed=%d, retries=%d\n",
+	    cmd->use_sg, cmd->allowed, cmd->retries);
 	printk("  request buffer=0x%p, request buffer len=0x%x\n",
 	    cmd->request_buffer, cmd->request_bufflen);
 	printk("  tag=%d, transfersize=0x%x\n",

drivers/scsi/scsi.c

@@ -489,7 +489,7 @@ void scsi_log_completion(struct scsi_cmnd *cmd, int disposition)
 			scsi_print_command(cmd);
 			if (status_byte(cmd->result) & CHECK_CONDITION) {
 				/*
-				 * XXX The print_sense formatting/prefix
+				 * XXX The scsi_print_sense formatting/prefix
 				 * doesn't match this function.
 				 */
 				scsi_print_sense("", cmd);
@@ -686,7 +686,6 @@ void scsi_init_cmd_from_req(struct scsi_cmnd *cmd, struct scsi_request *sreq)
 	cmd->request = sreq->sr_request;
 	memcpy(cmd->data_cmnd, sreq->sr_cmnd, sizeof(cmd->data_cmnd));
 	cmd->serial_number = 0;
-	cmd->serial_number_at_timeout = 0;
 	cmd->bufflen = sreq->sr_bufflen;
 	cmd->buffer = sreq->sr_buffer;
 	cmd->retries = 0;
@@ -716,7 +715,6 @@ void scsi_init_cmd_from_req(struct scsi_cmnd *cmd, struct scsi_request *sreq)
 	/*
 	 * Start the timer ticking.
 	 */
-	cmd->internal_timeout = NORMAL_TIMEOUT;
 	cmd->abort_reason = 0;
 	cmd->result = 0;
 
@@ -766,7 +764,6 @@ void __scsi_done(struct scsi_cmnd *cmd)
 	 * Set the serial numbers back to zero
 	 */
 	cmd->serial_number = 0;
-	cmd->serial_number_at_timeout = 0;
 	cmd->state = SCSI_STATE_BHQUEUE;
 	cmd->owner = SCSI_OWNER_BH_HANDLER;
 

drivers/scsi/scsi.h

@@ -23,7 +23,6 @@
 #include <linux/config.h>	    /* for CONFIG_SCSI_LOGGING */
 
 #include <scsi/scsi_cmnd.h>
-#include <scsi/scsi_dbg.h>
 #include <scsi/scsi_device.h>
 #include <scsi/scsi_eh.h>
 #include <scsi/scsi_request.h>
@@ -61,48 +60,6 @@ struct scatterlist;
 #define scsi_to_pci_dma_dir(scsi_dir)	((int)(scsi_dir))
 #define scsi_to_sbus_dma_dir(scsi_dir)	((int)(scsi_dir))
 
-/*
- * Old names for debug prettyprinting functions.
- */
-static inline void print_Scsi_Cmnd(struct scsi_cmnd *cmd)
-{
-	return scsi_print_command(cmd);
-}
-static inline void print_command(unsigned char *cdb)
-{
-	return __scsi_print_command(cdb);
-}
-static inline void print_sense(const char *devclass, struct scsi_cmnd *cmd)
-{
-	return scsi_print_sense(devclass, cmd);
-}
-static inline void print_req_sense(const char *devclass, struct scsi_request *req)
-{
-	return scsi_print_req_sense(devclass, req);
-}
-static inline void print_driverbyte(int scsiresult)
-{
-	return scsi_print_driverbyte(scsiresult);
-}
-static inline void print_hostbyte(int scsiresult)
-{
-	return scsi_print_hostbyte(scsiresult);
-}
-static inline void print_status(unsigned char status)
-{
-	return scsi_print_status(status);
-}
-static inline int print_msg(const unsigned char *msg)
-{
-	return scsi_print_msg(msg);
-}
-
-/*
- * This is the crap from the old error handling code.  We have it in a special
- * place so that we can more easily delete it later on.
- */
-#include "scsi_obsolete.h"
-
 /* obsolete typedef junk. */
 #include "scsi_typedefs.h"
 

drivers/scsi/scsi_error.c

@@ -79,11 +79,6 @@ int scsi_eh_scmd_add(struct scsi_cmnd *scmd, int eh_flag)
 	 */
 	scmd->owner = SCSI_OWNER_ERROR_HANDLER;
 	scmd->state = SCSI_STATE_FAILED;
-	/*
-	 * Set the serial_number_at_timeout to the current
-	 * serial_number
-	 */
-	scmd->serial_number_at_timeout = scmd->serial_number;
 	list_add_tail(&scmd->eh_entry, &shost->eh_cmd_q);
 	set_bit(SHOST_RECOVERY, &shost->shost_state);
 	shost->host_failed++;
@@ -481,7 +476,8 @@ static void scsi_eh_done(struct scsi_cmnd *scmd)
  **/
 static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, int timeout)
 {
-	struct Scsi_Host *host = scmd->device->host;
+	struct scsi_device *sdev = scmd->device;
+	struct Scsi_Host *shost = sdev->host;
 	DECLARE_MUTEX_LOCKED(sem);
 	unsigned long flags;
 	int rtn = SUCCESS;
@@ -492,27 +488,27 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, int timeout)
 	 */
 	scmd->owner = SCSI_OWNER_LOWLEVEL;
 
-	if (scmd->device->scsi_level <= SCSI_2)
+	if (sdev->scsi_level <= SCSI_2)
 		scmd->cmnd[1] = (scmd->cmnd[1] & 0x1f) |
-			(scmd->device->lun << 5 & 0xe0);
+			(sdev->lun << 5 & 0xe0);
 
 	scsi_add_timer(scmd, timeout, scsi_eh_times_out);
 
 	/*
 	 * set up the semaphore so we wait for the command to complete.
 	 */
-	scmd->device->host->eh_action = &sem;
+	shost->eh_action = &sem;
 	scmd->request->rq_status = RQ_SCSI_BUSY;
 
-	spin_lock_irqsave(scmd->device->host->host_lock, flags);
+	spin_lock_irqsave(shost->host_lock, flags);
 	scsi_log_send(scmd);
-	host->hostt->queuecommand(scmd, scsi_eh_done);
-	spin_unlock_irqrestore(scmd->device->host->host_lock, flags);
+	shost->hostt->queuecommand(scmd, scsi_eh_done);
+	spin_unlock_irqrestore(shost->host_lock, flags);
 
 	down(&sem);
 	scsi_log_completion(scmd, SUCCESS);
 
-	scmd->device->host->eh_action = NULL;
+	shost->eh_action = NULL;
 
 	/*
 	 * see if timeout.  if so, tell the host to forget about it.
@@ -532,10 +528,10 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, int timeout)
 		 * abort a timed out command or not.  not sure how
 		 * we should treat them differently anyways.
 		 */
-		spin_lock_irqsave(scmd->device->host->host_lock, flags);
-		if (scmd->device->host->hostt->eh_abort_handler)
-			scmd->device->host->hostt->eh_abort_handler(scmd);
-		spin_unlock_irqrestore(scmd->device->host->host_lock, flags);
+		spin_lock_irqsave(shost->host_lock, flags);
+		if (shost->hostt->eh_abort_handler)
+			shost->hostt->eh_abort_handler(scmd);
+		spin_unlock_irqrestore(shost->host_lock, flags);
 			
 		scmd->request->rq_status = RQ_SCSI_DONE;
 		scmd->owner = SCSI_OWNER_ERROR_HANDLER;
@@ -1061,7 +1057,6 @@ static int scsi_try_bus_reset(struct scsi_cmnd *scmd)
 	SCSI_LOG_ERROR_RECOVERY(3, printk("%s: Snd Bus RST\n",
 					  __FUNCTION__));
 	scmd->owner = SCSI_OWNER_LOWLEVEL;
-	scmd->serial_number_at_timeout = scmd->serial_number;
 
 	if (!scmd->device->host->hostt->eh_bus_reset_handler)
 		return FAILED;
@@ -1093,7 +1088,6 @@ static int scsi_try_host_reset(struct scsi_cmnd *scmd)
 	SCSI_LOG_ERROR_RECOVERY(3, printk("%s: Snd Host RST\n",
 					  __FUNCTION__));
 	scmd->owner = SCSI_OWNER_LOWLEVEL;
-	scmd->serial_number_at_timeout = scmd->serial_number;
 
 	if (!scmd->device->host->hostt->eh_host_reset_handler)
 		return FAILED;
@@ -1313,6 +1307,9 @@ int scsi_decide_disposition(struct scsi_cmnd *scmd)
 	case DID_IMM_RETRY:
 		return NEEDS_RETRY;
 
+	case DID_REQUEUE:
+		return ADD_TO_MLQUEUE;
+
 	case DID_ERROR:
 		if (msg_byte(scmd->result) == COMMAND_COMPLETE &&
 		    status_byte(scmd->result) == RESERVATION_CONFLICT)
@@ -1839,7 +1836,6 @@ scsi_reset_provider(struct scsi_device *dev, int flag)
 	scmd->bufflen			= 0;
 	scmd->request_buffer		= NULL;
 	scmd->request_bufflen		= 0;
-	scmd->internal_timeout		= NORMAL_TIMEOUT;
 	scmd->abort_reason		= DID_ABORT;
 
 	scmd->cmd_len			= 0;

drivers/scsi/scsi_ioctl.c

@@ -27,11 +27,6 @@
 
 #define NORMAL_RETRIES			5
 #define IOCTL_NORMAL_TIMEOUT			(10 * HZ)
-#define FORMAT_UNIT_TIMEOUT		(2 * 60 * 60 * HZ)
-#define START_STOP_TIMEOUT		(60 * HZ)
-#define MOVE_MEDIUM_TIMEOUT		(5 * 60 * HZ)
-#define READ_ELEMENT_STATUS_TIMEOUT	(5 * 60 * HZ)
-#define READ_DEFECT_DATA_TIMEOUT	(60 * HZ )  /* ZIP-250 on parallel port takes as long! */
 
 #define MAX_BUF PAGE_SIZE
 

drivers/scsi/scsi_lib.c

@@ -298,7 +298,6 @@ static int scsi_init_cmd_errh(struct scsi_cmnd *cmd)
 {
 	cmd->owner = SCSI_OWNER_MIDLEVEL;
 	cmd->serial_number = 0;
-	cmd->serial_number_at_timeout = 0;
 	cmd->abort_reason = 0;
 
 	memset(cmd->sense_buffer, 0, sizeof cmd->sense_buffer);
@@ -320,7 +319,6 @@ static int scsi_init_cmd_errh(struct scsi_cmnd *cmd)
 	memcpy(cmd->data_cmnd, cmd->cmnd, sizeof(cmd->cmnd));
 	cmd->buffer = cmd->request_buffer;
 	cmd->bufflen = cmd->request_bufflen;
-	cmd->internal_timeout = NORMAL_TIMEOUT;
 	cmd->abort_reason = 0;
 
 	return 1;

drivers/scsi/scsi_obsolete.h

@@ -1,106 +0,0 @@
-/*
- *  scsi_obsolete.h Copyright (C) 1997 Eric Youngdale
- *
- */
-
-#ifndef _SCSI_OBSOLETE_H
-#define _SCSI_OBSOLETE_H
-
-/*
- * These are the return codes for the abort and reset functions.  The mid-level
- * code uses these to decide what to do next.  Each of the low level abort
- * and reset functions must correctly indicate what it has done.
- * The descriptions are written from the point of view of the mid-level code,
- * so that the return code is telling the mid-level drivers exactly what
- * the low level driver has already done, and what remains to be done.
- */
-
-/* We did not do anything.  
- * Wait some more for this command to complete, and if this does not work, 
- * try something more serious. */
-#define SCSI_ABORT_SNOOZE 0
-
-/* This means that we were able to abort the command.  We have already
- * called the mid-level done function, and do not expect an interrupt that 
- * will lead to another call to the mid-level done function for this command */
-#define SCSI_ABORT_SUCCESS 1
-
-/* We called for an abort of this command, and we should get an interrupt 
- * when this succeeds.  Thus we should not restore the timer for this
- * command in the mid-level abort function. */
-#define SCSI_ABORT_PENDING 2
-
-/* Unable to abort - command is currently on the bus.  Grin and bear it. */
-#define SCSI_ABORT_BUSY 3
-
-/* The command is not active in the low level code. Command probably
- * finished. */
-#define SCSI_ABORT_NOT_RUNNING 4
-
-/* Something went wrong.  The low level driver will indicate the correct
- * error condition when it calls scsi_done, so the mid-level abort function
- * can simply wait until this comes through */
-#define SCSI_ABORT_ERROR 5
-
-/* We do not know how to reset the bus, or we do not want to.  Bummer.
- * Anyway, just wait a little more for the command in question, and hope that
- * it eventually finishes.  If it never finishes, the SCSI device could
- * hang, so use this with caution. */
-#define SCSI_RESET_SNOOZE 0
-
-/* We do not know how to reset the bus, or we do not want to.  Bummer.
- * We have given up on this ever completing.  The mid-level code will
- * request sense information to decide how to proceed from here. */
-#define SCSI_RESET_PUNT 1
-
-/* This means that we were able to reset the bus.  We have restarted all of
- * the commands that should be restarted, and we should be able to continue
- * on normally from here.  We do not expect any interrupts that will return
- * DID_RESET to any of the other commands in the host_queue, and the mid-level
- * code does not need to do anything special to keep the commands alive. 
- * If a hard reset was performed then all outstanding commands on the
- * bus have been restarted. */
-#define SCSI_RESET_SUCCESS 2
-
-/* We called for a reset of this bus, and we should get an interrupt 
- * when this succeeds.  Each command should get its own status
- * passed up to scsi_done, but this has not happened yet. 
- * If a hard reset was performed, then we expect an interrupt
- * for *each* of the outstanding commands that will have the
- * effect of restarting the commands.
- */
-#define SCSI_RESET_PENDING 3
-
-/* We did a reset, but do not expect an interrupt to signal DID_RESET.
- * This tells the upper level code to request the sense info, and this
- * should keep the command alive. */
-#define SCSI_RESET_WAKEUP 4
-
-/* The command is not active in the low level code. Command probably
-   finished. */
-#define SCSI_RESET_NOT_RUNNING 5
-
-/* Something went wrong, and we do not know how to fix it. */
-#define SCSI_RESET_ERROR 6
-
-#define SCSI_RESET_SYNCHRONOUS		0x01
-#define SCSI_RESET_ASYNCHRONOUS		0x02
-#define SCSI_RESET_SUGGEST_BUS_RESET	0x04
-#define SCSI_RESET_SUGGEST_HOST_RESET	0x08
-/*
- * This is a bitmask that is ored with one of the above codes.
- * It tells the mid-level code that we did a hard reset.
- */
-#define SCSI_RESET_BUS_RESET 0x100
-/*
- * This is a bitmask that is ored with one of the above codes.
- * It tells the mid-level code that we did a host adapter reset.
- */
-#define SCSI_RESET_HOST_RESET 0x200
-/*
- * Used to mask off bits and to obtain the basic action that was
- * performed.  
- */
-#define SCSI_RESET_ACTION   0xff
-
-#endif				/* SCSI_OBSOLETE_H */

drivers/scsi/scsi_priv.h

@@ -29,11 +29,6 @@ struct Scsi_Host;
 #define SCSI_CMND_MAGIC		0xE25C23A5
 #define SCSI_REQ_MAGIC		0x75F6D354
 
-/*
- *  Flag bit for the internal_timeout array
- */
-#define NORMAL_TIMEOUT		0
-
 /*
  * Scsi Error Handler Flags
  */

drivers/scsi/seagate.c

@@ -103,6 +103,7 @@
 #include <asm/uaccess.h>
 
 #include "scsi.h"
+#include <scsi/scsi_dbg.h>
 #include <scsi/scsi_host.h>
 #include "seagate.h"
 
@@ -746,7 +747,7 @@ static int internal_command (unsigned char target, unsigned char lun,
 
 #if (DEBUG & PRINT_COMMAND)
 	printk("scsi%d : target = %d, command = ", hostno, target);
-	print_command((unsigned char *) cmnd);
+	__scsi_print_command((unsigned char *) cmnd);
 #endif
 
 #if (DEBUG & PHASE_RESELECT)
@@ -1553,7 +1554,7 @@ connect_loop:
 	printk("\n");
 #endif
 	printk("scsi%d : status = ", hostno);
-	print_status(status);
+	scsi_print_status(status);
 	printk(" message = %02x\n", message);
 #endif
 

drivers/scsi/sg.c

@@ -51,6 +51,7 @@ static int sg_version_num = 30533;	/* 2 digits for each component */
 #include <linux/delay.h>
 
 #include "scsi.h"
+#include <scsi/scsi_dbg.h>
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_driver.h>
 #include <scsi/scsi_ioctl.h>
@@ -1368,7 +1369,7 @@ sg_cmd_done(Scsi_Cmnd * SCpnt)
 		if ((sdp->sgdebug > 0) &&
 		    ((CHECK_CONDITION == srp->header.masked_status) ||
 		     (COMMAND_TERMINATED == srp->header.masked_status)))
-			print_req_sense("sg_cmd_done", SRpnt);
+			scsi_print_req_sense("sg_cmd_done", SRpnt);
 
 		/* Following if statement is a patch supplied by Eric Youngdale */
 		if (driver_byte(SRpnt->sr_result) != 0

drivers/scsi/sun3_NCR5380.c

@@ -69,6 +69,7 @@
  *   finally replaced that by the *_PRINTK() macros.
  *
  */
+#include <scsi/scsi_dbg.h>
 
 /*
  * Further development / testing that should be done : 
@@ -2377,7 +2378,7 @@ static void NCR5380_information_transfer (struct Scsi_Host *instance)
  * 3..length+1	arguments
  *
  * Start the extended message buffer with the EXTENDED_MESSAGE
- * byte, since print_msg() wants the whole thing.  
+ * byte, since scsi_print_msg() wants the whole thing.  
  */
 		    extended_msg[0] = EXTENDED_MESSAGE;
 		    /* Accept first byte by clearing ACK */
@@ -2430,7 +2431,7 @@ static void NCR5380_information_transfer (struct Scsi_Host *instance)
 		default:
 		    if (!tmp) {
 			printk(KERN_DEBUG "scsi%d: rejecting message ", HOSTNO);
-			print_msg (extended_msg);
+			scsi_print_msg (extended_msg);
 			printk("\n");
 		    } else if (tmp != EXTENDED_MESSAGE)
 			printk(KERN_DEBUG "scsi%d: rejecting unknown "
@@ -2565,7 +2566,7 @@ static void NCR5380_reselect (struct Scsi_Host *instance)
 
     if (!(msg[0] & 0x80)) {
 	printk(KERN_DEBUG "scsi%d: expecting IDENTIFY message, got ", HOSTNO);
-	print_msg(msg);
+	scsi_print_msg(msg);
 	do_abort(instance);
 	return;
     }
@@ -2691,7 +2692,7 @@ static int NCR5380_abort (Scsi_Cmnd *cmd)
     unsigned long flags;
 
     printk(KERN_NOTICE "scsi%d: aborting command\n", HOSTNO);
-    print_Scsi_Cmnd (cmd);
+    scsi_print_command(cmd);
 
     NCR5380_print_status (instance);
 

drivers/scsi/sym53c8xx_2/sym_glue.c

@@ -799,12 +799,6 @@ static int sym_eh_handler(int op, char *opname, struct scsi_cmnd *cmd)
 
 	dev_warn(&cmd->device->sdev_gendev, "%s operation started.\n", opname);
 
-#if 0
-	/* This one should be the result of some race, thus to ignore */
-	if (cmd->serial_number != cmd->serial_number_at_timeout)
-		goto prepare;
-#endif
-
 	/* This one is queued in some place -> to wait for completion */
 	FOR_EACH_QUEUED_ELEMENT(&np->busy_ccbq, qp) {
 		struct sym_ccb *cp = sym_que_entry(qp, struct sym_ccb, link_ccbq);

drivers/scsi/ultrastor.c

@@ -945,7 +945,7 @@ static int ultrastor_abort(Scsi_Cmnd *SCpnt)
 	       config.mscp[mscp_index].SCint, SCpnt);
 #endif
     if (config.mscp[mscp_index].SCint == 0)
-	return SCSI_ABORT_NOT_RUNNING;
+	return FAILURE;
 
     if (config.mscp[mscp_index].SCint != SCpnt) panic("Bad abort");
     config.mscp[mscp_index].SCint = NULL;
@@ -1020,7 +1020,7 @@ static int ultrastor_host_reset(Scsi_Cmnd * SCpnt)
 #endif
 
     spin_unlock_irqrestore(host->host_lock, flags);
-    return SCSI_RESET_SUCCESS;
+    return SUCCESS;
 
 }
 

drivers/usb/image/microtek.c

@@ -335,7 +335,7 @@ static int mts_scsi_abort (Scsi_Cmnd *srb)
 
 	mts_urb_abort(desc);
 
-	return SCSI_ABORT_PENDING;
+	return FAILURE;
 }
 
 static int mts_scsi_host_reset (Scsi_Cmnd *srb)

include/scsi/scsi.h

@@ -295,6 +295,8 @@ struct scsi_lun {
 #define DID_PASSTHROUGH 0x0a	/* Force command past mid-layer            */
 #define DID_SOFT_ERROR  0x0b	/* The low level driver just wish a retry  */
 #define DID_IMM_RETRY   0x0c	/* Retry without decrementing retry count  */
+#define DID_REQUEUE	0x0d	/* Requeue command (no immediate retry) also
+				 * without decrementing the retry count	   */
 #define DRIVER_OK       0x00	/* Driver status                           */
 
 /*
@@ -360,6 +362,15 @@ struct scsi_lun {
 #define sense_error(sense)  ((sense) & 0xf)
 #define sense_valid(sense)  ((sense) & 0x80);
 
+/*
+ * default timeouts
+*/
+#define FORMAT_UNIT_TIMEOUT		(2 * 60 * 60 * HZ)
+#define START_STOP_TIMEOUT		(60 * HZ)
+#define MOVE_MEDIUM_TIMEOUT		(5 * 60 * HZ)
+#define READ_ELEMENT_STATUS_TIMEOUT	(5 * 60 * HZ)
+#define READ_DEFECT_DATA_TIMEOUT	(60 * HZ )
+
 
 #define IDENTIFY_BASE       0x80
 #define IDENTIFY(can_disconnect, lun)   (IDENTIFY_BASE |\

include/scsi/scsi_cmnd.h

@@ -43,21 +43,17 @@ struct scsi_cmnd {
 	void (*done) (struct scsi_cmnd *);	/* Mid-level done function */
 
 	/*
-	 * A SCSI Command is assigned a nonzero serial_number when internal_cmnd
-	 * passes it to the driver's queue command function.  The serial_number
-	 * is cleared when scsi_done is entered indicating that the command has
-	 * been completed.  If a timeout occurs, the serial number at the moment
-	 * of timeout is copied into serial_number_at_timeout.  By subsequently
-	 * comparing the serial_number and serial_number_at_timeout fields
-	 * during abort or reset processing, we can detect whether the command
-	 * has already completed.  This also detects cases where the command has
-	 * completed and the SCSI Command structure has already being reused
-	 * for another command, so that we can avoid incorrectly aborting or
-	 * resetting the new command.
-	 * The serial number is only unique per host.
+	 * A SCSI Command is assigned a nonzero serial_number before passed
+	 * to the driver's queue command function.  The serial_number is
+	 * cleared when scsi_done is entered indicating that the command
+	 * has been completed.  It currently doesn't have much use other
+	 * than printk's.  Some lldd's use this number for other purposes.
+	 * It's almost certain that such usages are either incorrect or
+	 * meaningless.  Please kill all usages other than printk's.  Also,
+	 * as this number is always identical to ->pid, please convert
+	 * printk's to use ->pid, so that we can kill this field.
 	 */
 	unsigned long serial_number;
-	unsigned long serial_number_at_timeout;
 
 	int retries;
 	int allowed;
@@ -65,12 +61,6 @@ struct scsi_cmnd {
 	int timeout_total;
 	int timeout;
 
-	/*
-	 * We handle the timeout differently if it happens when a reset, 
-	 * abort, etc are in process. 
-	 */
-	unsigned volatile char internal_timeout;
-
 	unsigned char cmd_len;
 	unsigned char old_cmd_len;
 	enum dma_data_direction sc_data_direction;

include/scsi/scsi_device.h

@@ -44,7 +44,8 @@ struct scsi_device {
 	struct list_head    same_target_siblings; /* just the devices sharing same target id */
 
 	/* this is now protected by the request_queue->queue_lock */
-	volatile unsigned short device_busy;	/* commands actually active on low-level */
+	unsigned int device_busy;	/* commands actually active on
+					 * low-level. protected by queue_lock. */
 	spinlock_t list_lock;
 	struct list_head cmd_list;	/* queue of in use SCSI Command structures */
 	struct list_head starved_entry;

include/scsi/scsi_host.h

@@ -448,8 +448,14 @@ struct Scsi_Host {
 	wait_queue_head_t       host_wait;
 	struct scsi_host_template *hostt;
 	struct scsi_transport_template *transportt;
-	volatile unsigned short host_busy;   /* commands actually active on low-level */
-	volatile unsigned short host_failed; /* commands that failed. */
+
+	/*
+	 * The following two fields are protected with host_lock;
+	 * however, eh routines can safely access during eh processing
+	 * without acquiring the lock.
+	 */
+	unsigned int host_busy;		   /* commands actually active on low-level */
+	unsigned int host_failed;	   /* commands that failed. */
     
 	unsigned short host_no;  /* Used for IOCTL_GET_IDLUN, /proc/scsi et al. */
 	int resetting; /* if set, it means that last_reset is a valid value */