OMAP3: PM debug: allow runtime toggle of PM features

Allow enable/disable of low-power states during idle.  To
enable low-power idle:

   echo 1 > /debug/pm_debug/sleep_while_idle

 to disable:

   echo 0 > /debug/pm_debug/sleep_while_idle

Also allow enable/disable of OFF-mode.  To enable:

   echo 1 > /debug/pm_debug/enable_off_mode

 to disable:

   echo 0 > /debug/pm_debug/enable_off_mode

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

arch/arm/mach-omap2/pm-debug.c

@@ -527,6 +527,29 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *dir)
 	return 0;
 }
 
+static int option_get(void *data, u64 *val)
+{
+	u32 *option = data;
+
+	*val = *option;
+
+	return 0;
+}
+
+static int option_set(void *data, u64 val)
+{
+	u32 *option = data;
+
+	*option = val;
+
+	if (option == &enable_off_mode)
+		omap3_pm_off_mode_enable(val);
+
+	return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(pm_dbg_option_fops, option_get, option_set, "%llu\n");
+
 static int __init pm_dbg_init(void)
 {
 	int i;
@@ -569,6 +592,10 @@ static int __init pm_dbg_init(void)
 
 		}
 
+	(void) debugfs_create_file("enable_off_mode", S_IRUGO | S_IWUGO, d,
+				   &enable_off_mode, &pm_dbg_option_fops);
+	(void) debugfs_create_file("sleep_while_idle", S_IRUGO | S_IWUGO, d,
+				   &sleep_while_idle, &pm_dbg_option_fops);
 	pm_dbg_init_done = 1;
 
 	return 0;

arch/arm/mach-omap2/pm.h

@@ -13,7 +13,11 @@
 
 #include <plat/powerdomain.h>
 
+extern u32 enable_off_mode;
+extern u32 sleep_while_idle;
+
 extern void *omap3_secure_ram_storage;
+extern void omap3_pm_off_mode_enable(int);
 
 extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm);
 extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state);

arch/arm/mach-omap2/pm34xx.c

@@ -25,6 +25,7 @@
 #include <linux/list.h>
 #include <linux/err.h>
 #include <linux/gpio.h>
+#include <linux/clk.h>
 
 #include <plat/sram.h>
 #include <plat/clockdomain.h>
@@ -57,6 +58,9 @@
 #define OMAP343X_TABLE_VALUE_OFFSET	   0x30
 #define OMAP343X_CONTROL_REG_VALUE_OFFSET  0x32
 
+u32 enable_off_mode;
+u32 sleep_while_idle;
+
 struct power_state {
 	struct powerdomain *pwrdm;
 	u32 next_state;
@@ -456,6 +460,8 @@ static int omap3_fclks_active(void)
 
 static int omap3_can_sleep(void)
 {
+	if (!sleep_while_idle)
+		return 0;
 	if (!omap_uart_can_sleep())
 		return 0;
 	if (omap3_fclks_active())
@@ -900,6 +906,22 @@ static void __init prcm_setup_regs(void)
 	omap3_d2d_idle();
 }
 
+void omap3_pm_off_mode_enable(int enable)
+{
+	struct power_state *pwrst;
+	u32 state;
+
+	if (enable)
+		state = PWRDM_POWER_OFF;
+	else
+		state = PWRDM_POWER_RET;
+
+	list_for_each_entry(pwrst, &pwrst_list, node) {
+		pwrst->next_state = state;
+		set_pwrdm_state(pwrst->pwrdm, state);
+	}
+}
+
 int omap3_pm_get_suspend_state(struct powerdomain *pwrdm)
 {
 	struct power_state *pwrst;

arch/arm/mach-omap2/serial.c

@@ -155,8 +155,6 @@ static inline void __init omap_uart_reset(struct omap_uart_state *uart)
 
 #if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3)
 
-static int enable_off_mode; /* to be removed by full off-mode patches */
-
 static void omap_uart_save_context(struct omap_uart_state *uart)
 {
 	u16 lcr = 0;