arm: use addruart macro to establish debug mappings

Since we can get both physical and virtual addresses from the addruart
macro, we can use this to establish the debug mappings.

In the case of CONFIG_DEBUG_ICEDCC, we don't need any mappings, but
may still need to setup r7 correctly.

Incorporating ASM changes from Nicolas Pitre <npitre@fluxnic.net>.

Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com>
Tested-by: Kevin Hilman <khilman@deeprootsystems.com>

arch/arm/kernel/head.S

@@ -22,6 +22,10 @@
 #include <asm/thread_info.h>
 #include <asm/system.h>
 
+#ifdef CONFIG_DEBUG_LL
+#include <mach/debug-macro.S>
+#endif
+
 #if (PHYS_OFFSET & 0x001fffff)
 #error "PHYS_OFFSET must be at an even 2MiB boundary!"
 #endif
@@ -204,24 +208,35 @@ __create_page_tables:
 	str	r6, [r0]
 
 #ifdef CONFIG_DEBUG_LL
-	ldr	r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
+#ifndef CONFIG_DEBUG_ICEDCC
 	/*
 	 * Map in IO space for serial debugging.
 	 * This allows debug messages to be output
 	 * via a serial console before paging_init.
 	 */
-	ldr	r3, [r8, #MACHINFO_PGOFFIO]
+	addruart r7, r3
+
+	mov	r3, r3, lsr #20
+	mov	r3, r3, lsl #2
+
 	add	r0, r4, r3
 	rsb	r3, r3, #0x4000			@ PTRS_PER_PGD*sizeof(long)
 	cmp	r3, #0x0800			@ limit to 512MB
 	movhi	r3, #0x0800
 	add	r6, r0, r3
-	ldr	r3, [r8, #MACHINFO_PHYSIO]
-	orr	r3, r3, r7
+	mov	r3, r7, lsr #20
+	ldr	r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
+	orr	r3, r7, r3, lsl #20
 1:	str	r3, [r0], #4
 	add	r3, r3, #1 << 20
 	teq	r0, r6
 	bne	1b
+
+#else /* CONFIG_DEBUG_ICEDCC */
+	/* we don't need any serial debugging mappings for ICEDCC */
+	ldr	r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
+#endif /* !CONFIG_DEBUG_ICEDCC */
+
 #if defined(CONFIG_ARCH_NETWINDER) || defined(CONFIG_ARCH_CATS)
 	/*
 	 * If we're using the NetWinder or CATS, we also need to map