mfd: Read wm831x AUXADC conversion results before acknowledging interrupt

Ensure that there's no possibility of loosing an AUXADC interrupt by reading
the conversion result in the IRQ handler when using interrupts. Otherwise
it's possible that under very heavy load a new conversion could be initiated
before the acknowledgement for a previous interrupt has happened.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

drivers/mfd/wm831x-core.c

@@ -376,6 +376,16 @@ int wm831x_auxadc_read(struct wm831x *wm831x, enum wm831x_auxadc input)
 				goto disable;
 			}
 		}
+
+		ret = wm831x_reg_read(wm831x, WM831X_AUXADC_DATA);
+		if (ret < 0) {
+			dev_err(wm831x->dev,
+				"Failed to read AUXADC data: %d\n", ret);
+			goto disable;
+		}
+
+		wm831x->auxadc_data = ret;
+
 	} else {
 		/* If we are using interrupts then wait for the
 		 * interrupt to complete.  Use an extremely long
@@ -390,23 +400,18 @@ int wm831x_auxadc_read(struct wm831x *wm831x, enum wm831x_auxadc input)
 		}
 	}
 
-	ret = wm831x_reg_read(wm831x, WM831X_AUXADC_DATA);
-	if (ret < 0) {
-		dev_err(wm831x->dev, "Failed to read AUXADC data: %d\n", ret);
+	src = ((wm831x->auxadc_data & WM831X_AUX_DATA_SRC_MASK)
+	       >> WM831X_AUX_DATA_SRC_SHIFT) - 1;
+
+	if (src == 14)
+		src = WM831X_AUX_CAL;
+
+	if (src != input) {
+		dev_err(wm831x->dev, "Data from source %d not %d\n",
+			src, input);
+		ret = -EINVAL;
 	} else {
-		src = ((ret & WM831X_AUX_DATA_SRC_MASK)
-		       >> WM831X_AUX_DATA_SRC_SHIFT) - 1;
-
-		if (src == 14)
-			src = WM831X_AUX_CAL;
-
-		if (src != input) {
-			dev_err(wm831x->dev, "Data from source %d not %d\n",
-				src, input);
-			ret = -EINVAL;
-		} else {
-			ret &= WM831X_AUX_DATA_MASK;
-		}
+		ret = wm831x->auxadc_data & WM831X_AUX_DATA_MASK;
 	}
 
 disable:
@@ -420,6 +425,16 @@ EXPORT_SYMBOL_GPL(wm831x_auxadc_read);
 static irqreturn_t wm831x_auxadc_irq(int irq, void *irq_data)
 {
 	struct wm831x *wm831x = irq_data;
+	int ret;
+
+	ret = wm831x_reg_read(wm831x, WM831X_AUXADC_DATA);
+	if (ret < 0) {
+		dev_err(wm831x->dev,
+			"Failed to read AUXADC data: %d\n", ret);
+		wm831x->auxadc_data = 0xffff;
+	} else {
+		wm831x->auxadc_data = ret;
+	}
 
 	complete(&wm831x->auxadc_done);
 

include/linux/mfd/wm831x/core.h

@@ -278,6 +278,7 @@ struct wm831x {
 
 	struct mutex auxadc_lock;
 	struct completion auxadc_done;
+	u16 auxadc_data;
 
 	/* The WM831x has a security key blocking access to certain
 	 * registers.  The mutex is taken by the accessors for locking