drm/i915: stop using GMBUS IRQs on Gen4 chips

Commit 28c70f162 ("drm/i915: use the gmbus irq for waits") switched to
using GMBUS irqs instead of GPIO bit-banging for chipset generations 4
and above.

It turns out though that on many systems this leads to spurious interrupts
being generated, long after the register write to disable the IRQs has been
issued.

Typically this results in the spurious interrupt source getting
disabled:

[    9.636345] irq 16: nobody cared (try booting with the "irqpoll" option)
[    9.637915] Pid: 4157, comm: ifup Tainted: GF            3.9.0-rc2-00341-g0863702 #422
[    9.639484] Call Trace:
[    9.640731]  <IRQ>  [<ffffffff8109b40d>] __report_bad_irq+0x1d/0xc7
[    9.640731]  [<ffffffff8109b7db>] note_interrupt+0x15b/0x1e8
[    9.640731]  [<ffffffff810999f7>] handle_irq_event_percpu+0x1bf/0x214
[    9.640731]  [<ffffffff81099a88>] handle_irq_event+0x3c/0x5c
[    9.640731]  [<ffffffff8109c139>] handle_fasteoi_irq+0x7a/0xb0
[    9.640731]  [<ffffffff8100400e>] handle_irq+0x1a/0x24
[    9.640731]  [<ffffffff81003d17>] do_IRQ+0x48/0xaf
[    9.640731]  [<ffffffff8142f1ea>] common_interrupt+0x6a/0x6a
[    9.640731]  <EOI>  [<ffffffff8142f952>] ? system_call_fastpath+0x16/0x1b
[    9.640731] handlers:
[    9.640731] [<ffffffffa000d771>] usb_hcd_irq [usbcore]
[    9.640731] [<ffffffffa0306189>] yenta_interrupt [yenta_socket]
[    9.640731] Disabling IRQ #16

The really curious thing is now that irq 16 is _not_ the interrupt for
the i915 driver when using MSI, but it _is_ the interrupt when not
using MSI. So by all indications it seems like gmbus is able to
generate a legacy (shared) interrupt in MSI mode on some
configurations. I've tried to reproduce this and the differentiating
thing seems to be that on unaffected systems no other device uses irq
16 (which seems to be the non-MSI intel gfx interrupt on all gm45).

I have no idea how that even can happen.

To avoid tempting this elephant into a rage, just disable gmbus
interrupt support on gen 4.

v2: Improve the commit message with exact details of what's going on.
Also add a comment in the code to warn against this particular
elephant in the room.

v3: Move the comment explaing how gen4 blows up next to the definition
of HAS_GMBUS_IRQ to keep the code-flow straight. Suggested by Chris
Wilson.

Signed-off-by: Jiri Kosina <jkosina@suse.cz> (v1)
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
References: https://lkml.org/lkml/2013/3/8/325
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/intel_i2c.c

@@ -203,7 +203,13 @@ intel_gpio_setup(struct intel_gmbus *bus, u32 pin)
 	algo->data = bus;
 }
 
-#define HAS_GMBUS_IRQ(dev) (INTEL_INFO(dev)->gen >= 4)
+/*
+ * gmbus on gen4 seems to be able to generate legacy interrupts even when in MSI
+ * mode. This results in spurious interrupt warnings if the legacy irq no. is
+ * shared with another device. The kernel then disables that interrupt source
+ * and so prevents the other device from working properly.
+ */
+#define HAS_GMBUS_IRQ(dev) (INTEL_INFO(dev)->gen >= 5)
 static int
 gmbus_wait_hw_status(struct drm_i915_private *dev_priv,
 		     u32 gmbus2_status,
@@ -214,6 +220,9 @@ gmbus_wait_hw_status(struct drm_i915_private *dev_priv,
 	u32 gmbus2 = 0;
 	DEFINE_WAIT(wait);
 
+	if (!HAS_GMBUS_IRQ(dev_priv->dev))
+		gmbus4_irq_en = 0;
+
 	/* Important: The hw handles only the first bit, so set only one! Since
 	 * we also need to check for NAKs besides the hw ready/idle signal, we
 	 * need to wake up periodically and check that ourselves. */