libata: remove ATA_FLAG_{SRST|SATA_RESET}

These flags are marked as obsolete and the checks for them have been removed
by commit 294440887b32c58d220fb54b73b7a58079b78f20 (libata-sff: kill unused
ata_bus_reset()), so I think it's time to finally get rid of them...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

drivers/ata/pata_acpi.c

@@ -245,7 +245,7 @@ static struct ata_port_operations pacpi_ops = {
 static int pacpi_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info = {
-		.flags		= ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.flags		= ATA_FLAG_SLAVE_POSS,
 
 		.pio_mask	= ATA_PIO4,
 		.mwdma_mask	= ATA_MWDMA2,

drivers/ata/pata_sis.c

@@ -593,7 +593,7 @@ static const struct ata_port_info sis_info133 = {
 	.port_ops	= &sis_133_ops,
 };
 const struct ata_port_info sis_info133_for_sata = {
-	.flags		= ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+	.flags		= ATA_FLAG_SLAVE_POSS,
 	.pio_mask	= ATA_PIO4,
 	/* No MWDMA */
 	.udma_mask	= ATA_UDMA6,

drivers/ata/sata_sx4.c

@@ -274,8 +274,8 @@ static const struct ata_port_info pdc_port_info[] = {
 	/* board_20621 */
 	{
 		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-				  ATA_FLAG_SRST | ATA_FLAG_MMIO |
-				  ATA_FLAG_NO_ATAPI | ATA_FLAG_PIO_POLLING,
+				  ATA_FLAG_MMIO | ATA_FLAG_NO_ATAPI |
+				  ATA_FLAG_PIO_POLLING,
 		.pio_mask	= ATA_PIO4,
 		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask	= ATA_UDMA6,

drivers/scsi/ipr.c

@@ -6219,8 +6219,8 @@ static struct ata_port_operations ipr_sata_ops = {
 };
 
 static struct ata_port_info sata_port_info = {
-	.flags	= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_SATA_RESET |
-	ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA,
+	.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO |
+			  ATA_FLAG_PIO_DMA,
 	.pio_mask	= ATA_PIO4_ONLY,
 	.mwdma_mask	= ATA_MWDMA2,
 	.udma_mask	= ATA_UDMA6,

drivers/scsi/libsas/sas_ata.c

@@ -372,8 +372,8 @@ static struct ata_port_operations sas_sata_ops = {
 };
 
 static struct ata_port_info sata_port_info = {
-	.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_SATA_RESET |
-		ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | ATA_FLAG_NCQ,
+	.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO |
+		 ATA_FLAG_PIO_DMA | ATA_FLAG_NCQ,
 	.pio_mask = ATA_PIO4,
 	.mwdma_mask = ATA_MWDMA2,
 	.udma_mask = ATA_UDMA6,

include/linux/libata.h

@@ -181,8 +181,6 @@ enum {
 	ATA_FLAG_SATA		= (1 << 1),
 	ATA_FLAG_NO_LEGACY	= (1 << 2), /* no legacy mode check */
 	ATA_FLAG_MMIO		= (1 << 3), /* use MMIO, not PIO */
-	ATA_FLAG_SRST		= (1 << 4), /* (obsolete) use ATA SRST, not E.D.D. */
-	ATA_FLAG_SATA_RESET	= (1 << 5), /* (obsolete) use COMRESET */
 	ATA_FLAG_NO_ATAPI	= (1 << 6), /* No ATAPI support */
 	ATA_FLAG_PIO_DMA	= (1 << 7), /* PIO cmds via DMA */
 	ATA_FLAG_PIO_LBA48	= (1 << 8), /* Host DMA engine is LBA28 only */