Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
  [media] v1.88 DM04/QQBOX Move remote to use rc_core dvb-usb-remote
  [media] Add missing include guard to header file
  [media] Inlined functions should be static
  [media] Remove invalid parameter description
  [media] cpia2: fix warning about invalid trigraph sequence
  [media] s5p-csis: Add missing dependency on PLAT_S5P
  [media] gspca/kinect: wrap gspca_debug with GSPCA_DEBUG
  [media] fintek-cir: new driver for Fintek LPC SuperIO CIR function
  [media] uvcvideo: Connect video devices to media entities
  [media] uvcvideo: Register subdevices for each entity
  [media] uvcvideo: Register a v4l2_device
  [media] add V4L2-PIX-FMT-SRGGB12 & friends to docbook
  [media] Documentation/DocBook: Rename media fops xml files
  [media] Media DocBook: fix validation errors
  [media] wl12xx: g_volatile_ctrl fix: wrong field set
  [media] fix kconfig dependency warning for VIDEO_TIMBERDALE
  [media] dm1105: GPIO handling added, I2C on GPIO added, LNB control through GPIO reworked
  [media] Add support for M-5MOLS 8 Mega Pixel camera ISP

Documentation/DocBook/dvb/dvbproperty.xml

@@ -141,13 +141,15 @@ struct dtv_properties {
  </row></tbody></tgroup></informaltable>
 </section>
 
+<section>
+	<title>Property types</title>
 <para>
 On <link linkend="FE_GET_PROPERTY">FE_GET_PROPERTY</link>/<link linkend="FE_SET_PROPERTY">FE_SET_PROPERTY</link>,
 the actual action is determined by the dtv_property cmd/data pairs. With one single ioctl, is possible to
 get/set up to 64 properties. The actual meaning of each property is described on the next sections.
 </para>
 
-<para>The Available frontend property types are:</para>
+<para>The available frontend property types are:</para>
 <programlisting>
 #define DTV_UNDEFINED		0
 #define DTV_TUNE		1
@@ -193,6 +195,7 @@ get/set up to 64 properties. The actual meaning of each property is described on
 #define DTV_ISDBT_LAYER_ENABLED	41
 #define DTV_ISDBS_TS_ID		42
 </programlisting>
+</section>
 
 <section id="fe_property_common">
 	<title>Parameters that are common to all Digital TV standards</title>

Documentation/DocBook/media-entities.tmpl

@@ -293,6 +293,7 @@
 <!ENTITY sub-yuyv SYSTEM "v4l/pixfmt-yuyv.xml">
 <!ENTITY sub-yvyu SYSTEM "v4l/pixfmt-yvyu.xml">
 <!ENTITY sub-srggb10 SYSTEM "v4l/pixfmt-srggb10.xml">
+<!ENTITY sub-srggb12 SYSTEM "v4l/pixfmt-srggb12.xml">
 <!ENTITY sub-srggb8 SYSTEM "v4l/pixfmt-srggb8.xml">
 <!ENTITY sub-y10 SYSTEM "v4l/pixfmt-y10.xml">
 <!ENTITY sub-y12 SYSTEM "v4l/pixfmt-y12.xml">
@@ -373,9 +374,9 @@
 <!ENTITY sub-media-indices SYSTEM "media-indices.tmpl">
 
 <!ENTITY sub-media-controller SYSTEM "v4l/media-controller.xml">
-<!ENTITY sub-media-open SYSTEM "v4l/media-func-open.xml">
-<!ENTITY sub-media-close SYSTEM "v4l/media-func-close.xml">
-<!ENTITY sub-media-ioctl SYSTEM "v4l/media-func-ioctl.xml">
+<!ENTITY sub-media-func-open SYSTEM "v4l/media-func-open.xml">
+<!ENTITY sub-media-func-close SYSTEM "v4l/media-func-close.xml">
+<!ENTITY sub-media-func-ioctl SYSTEM "v4l/media-func-ioctl.xml">
 <!ENTITY sub-media-ioc-device-info SYSTEM "v4l/media-ioc-device-info.xml">
 <!ENTITY sub-media-ioc-enum-entities SYSTEM "v4l/media-ioc-enum-entities.xml">
 <!ENTITY sub-media-ioc-enum-links SYSTEM "v4l/media-ioc-enum-links.xml">

Documentation/DocBook/v4l/media-controller.xml

@@ -78,9 +78,9 @@
 <appendix id="media-user-func">
   <title>Function Reference</title>
   <!-- Keep this alphabetically sorted. -->
-  &sub-media-open;
-  &sub-media-close;
-  &sub-media-ioctl;
+  &sub-media-func-open;
+  &sub-media-func-close;
+  &sub-media-func-ioctl;
   <!-- All ioctls go here. -->
   &sub-media-ioc-device-info;
   &sub-media-ioc-enum-entities;

Documentation/DocBook/v4l/pixfmt.xml

@@ -673,6 +673,7 @@ access the palette, this must be done with ioctls of the Linux framebuffer API.<
     &sub-srggb8;
     &sub-sbggr16;
     &sub-srggb10;
+    &sub-srggb12;
   </section>
 
   <section id="yuv-formats">

Documentation/DocBook/v4l/subdev-formats.xml

@@ -2531,13 +2531,13 @@
 	<constant>_JPEG</constant> prefix the format code is made of
 	the following information.
 	<itemizedlist>
-	  <listitem>The number of bus samples per entropy encoded byte.</listitem>
-	  <listitem>The bus width.</listitem>
+	  <listitem><para>The number of bus samples per entropy encoded byte.</para></listitem>
+	  <listitem><para>The bus width.</para></listitem>
 	</itemizedlist>
+      </para>
 
-	<para>For instance, for a JPEG baseline process and an 8-bit bus width
-	  the format will be named <constant>V4L2_MBUS_FMT_JPEG_1X8</constant>.
-	</para>
+      <para>For instance, for a JPEG baseline process and an 8-bit bus width
+        the format will be named <constant>V4L2_MBUS_FMT_JPEG_1X8</constant>.
       </para>
 
       <para>The following table lists existing JPEG compressed formats.</para>

drivers/media/dvb/dm1105/dm1105.c

@@ -20,6 +20,7 @@
  */
 
 #include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
@@ -49,11 +50,12 @@
 
 #define UNSET (-1U)
 
-#define DM1105_BOARD_NOAUTO		UNSET
-#define DM1105_BOARD_UNKNOWN		0
-#define DM1105_BOARD_DVBWORLD_2002	1
-#define DM1105_BOARD_DVBWORLD_2004	2
-#define DM1105_BOARD_AXESS_DM05		3
+#define DM1105_BOARD_NOAUTO			UNSET
+#define DM1105_BOARD_UNKNOWN			0
+#define DM1105_BOARD_DVBWORLD_2002		1
+#define DM1105_BOARD_DVBWORLD_2004		2
+#define DM1105_BOARD_AXESS_DM05			3
+#define DM1105_BOARD_UNBRANDED_I2C_ON_GPIO	4
 
 /* ----------------------------------------------- */
 /*
@@ -157,22 +159,38 @@
 #define DM1105_MAX				0x04
 
 #define DRIVER_NAME				"dm1105"
+#define DM1105_I2C_GPIO_NAME			"dm1105-gpio"
 
 #define DM1105_DMA_PACKETS			47
 #define DM1105_DMA_PACKET_LENGTH		(128*4)
 #define DM1105_DMA_BYTES			(128 * 4 * DM1105_DMA_PACKETS)
 
+/*  */
+#define GPIO08					(1 << 8)
+#define GPIO13					(1 << 13)
+#define GPIO14					(1 << 14)
+#define GPIO15					(1 << 15)
+#define GPIO16					(1 << 16)
+#define GPIO17					(1 << 17)
+#define GPIO_ALL				0x03ffff
+
 /* GPIO's for LNB power control */
-#define DM1105_LNB_MASK				0x00000000
-#define DM1105_LNB_OFF				0x00020000
-#define DM1105_LNB_13V				0x00010100
-#define DM1105_LNB_18V				0x00000100
+#define DM1105_LNB_MASK				(GPIO_ALL & ~(GPIO14 | GPIO13))
+#define DM1105_LNB_OFF				GPIO17
+#define DM1105_LNB_13V				(GPIO16 | GPIO08)
+#define DM1105_LNB_18V				GPIO08
 
 /* GPIO's for LNB power control for Axess DM05 */
-#define DM05_LNB_MASK				0x00000000
-#define DM05_LNB_OFF				0x00020000/* actually 13v */
-#define DM05_LNB_13V				0x00020000
-#define DM05_LNB_18V				0x00030000
+#define DM05_LNB_MASK				(GPIO_ALL & ~(GPIO14 | GPIO13))
+#define DM05_LNB_OFF				GPIO17/* actually 13v */
+#define DM05_LNB_13V				GPIO17
+#define DM05_LNB_18V				(GPIO17 | GPIO16)
+
+/* GPIO's for LNB power control for unbranded with I2C on GPIO */
+#define UNBR_LNB_MASK				(GPIO17 | GPIO16)
+#define UNBR_LNB_OFF				0
+#define UNBR_LNB_13V				GPIO17
+#define UNBR_LNB_18V				(GPIO17 | GPIO16)
 
 static unsigned int card[]  = {[0 ... 3] = UNSET };
 module_param_array(card,  int, NULL, 0444);
@@ -187,7 +205,11 @@ static unsigned int dm1105_devcount;
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
 struct dm1105_board {
-	char                    *name;
+	char	*name;
+	struct	{
+		u32	mask, off, v13, v18;
+	} lnb;
+	u32	gpio_scl, gpio_sda;
 };
 
 struct dm1105_subid {
@@ -199,15 +221,50 @@ struct dm1105_subid {
 static const struct dm1105_board dm1105_boards[] = {
 	[DM1105_BOARD_UNKNOWN] = {
 		.name		= "UNKNOWN/GENERIC",
+		.lnb = {
+			.mask = DM1105_LNB_MASK,
+			.off = DM1105_LNB_OFF,
+			.v13 = DM1105_LNB_13V,
+			.v18 = DM1105_LNB_18V,
+		},
 	},
 	[DM1105_BOARD_DVBWORLD_2002] = {
 		.name		= "DVBWorld PCI 2002",
+		.lnb = {
+			.mask = DM1105_LNB_MASK,
+			.off = DM1105_LNB_OFF,
+			.v13 = DM1105_LNB_13V,
+			.v18 = DM1105_LNB_18V,
+		},
 	},
 	[DM1105_BOARD_DVBWORLD_2004] = {
 		.name		= "DVBWorld PCI 2004",
+		.lnb = {
+			.mask = DM1105_LNB_MASK,
+			.off = DM1105_LNB_OFF,
+			.v13 = DM1105_LNB_13V,
+			.v18 = DM1105_LNB_18V,
+		},
 	},
 	[DM1105_BOARD_AXESS_DM05] = {
 		.name		= "Axess/EasyTv DM05",
+		.lnb = {
+			.mask = DM05_LNB_MASK,
+			.off = DM05_LNB_OFF,
+			.v13 = DM05_LNB_13V,
+			.v18 = DM05_LNB_18V,
+		},
+	},
+	[DM1105_BOARD_UNBRANDED_I2C_ON_GPIO] = {
+		.name		= "Unbranded DM1105 with i2c on GPIOs",
+		.lnb = {
+			.mask = UNBR_LNB_MASK,
+			.off = UNBR_LNB_OFF,
+			.v13 = UNBR_LNB_13V,
+			.v18 = UNBR_LNB_18V,
+		},
+		.gpio_scl	= GPIO14,
+		.gpio_sda	= GPIO13,
 	},
 };
 
@@ -293,6 +350,8 @@ struct dm1105_dev {
 
 	/* i2c */
 	struct i2c_adapter i2c_adap;
+	struct i2c_adapter i2c_bb_adap;
+	struct i2c_algo_bit_data i2c_bit;
 
 	/* irq */
 	struct work_struct work;
@@ -328,6 +387,103 @@ struct dm1105_dev {
 #define dm_setl(reg, bit)	dm_andorl((reg), (bit), (bit))
 #define dm_clearl(reg, bit)	dm_andorl((reg), (bit), 0)
 
+/* The chip has 18 GPIOs. In HOST mode GPIO's used as 15 bit address lines,
+ so we can use only 3 GPIO's from GPIO15 to GPIO17.
+ Here I don't check whether HOST is enebled as it is not implemented yet.
+ */
+static void dm1105_gpio_set(struct dm1105_dev *dev, u32 mask)
+{
+	if (mask & 0xfffc0000)
+		printk(KERN_ERR "%s: Only 18 GPIO's are allowed\n", __func__);
+
+	if (mask & 0x0003ffff)
+		dm_setl(DM1105_GPIOVAL, mask & 0x0003ffff);
+
+}
+
+static void dm1105_gpio_clear(struct dm1105_dev *dev, u32 mask)
+{
+	if (mask & 0xfffc0000)
+		printk(KERN_ERR "%s: Only 18 GPIO's are allowed\n", __func__);
+
+	if (mask & 0x0003ffff)
+		dm_clearl(DM1105_GPIOVAL, mask & 0x0003ffff);
+
+}
+
+static void dm1105_gpio_andor(struct dm1105_dev *dev, u32 mask, u32 val)
+{
+	if (mask & 0xfffc0000)
+		printk(KERN_ERR "%s: Only 18 GPIO's are allowed\n", __func__);
+
+	if (mask & 0x0003ffff)
+		dm_andorl(DM1105_GPIOVAL, mask & 0x0003ffff, val);
+
+}
+
+static u32 dm1105_gpio_get(struct dm1105_dev *dev, u32 mask)
+{
+	if (mask & 0xfffc0000)
+		printk(KERN_ERR "%s: Only 18 GPIO's are allowed\n", __func__);
+
+	if (mask & 0x0003ffff)
+		return dm_readl(DM1105_GPIOVAL) & mask & 0x0003ffff;
+
+	return 0;
+}
+
+static void dm1105_gpio_enable(struct dm1105_dev *dev, u32 mask, int asoutput)
+{
+	if (mask & 0xfffc0000)
+		printk(KERN_ERR "%s: Only 18 GPIO's are allowed\n", __func__);
+
+	if ((mask & 0x0003ffff) && asoutput)
+		dm_clearl(DM1105_GPIOCTR, mask & 0x0003ffff);
+	else if ((mask & 0x0003ffff) && !asoutput)
+		dm_setl(DM1105_GPIOCTR, mask & 0x0003ffff);
+
+}
+
+static void dm1105_setline(struct dm1105_dev *dev, u32 line, int state)
+{
+	if (state)
+		dm1105_gpio_enable(dev, line, 0);
+	else {
+		dm1105_gpio_enable(dev, line, 1);
+		dm1105_gpio_clear(dev, line);
+	}
+}
+
+static void dm1105_setsda(void *data, int state)
+{
+	struct dm1105_dev *dev = data;
+
+	dm1105_setline(dev, dm1105_boards[dev->boardnr].gpio_sda, state);
+}
+
+static void dm1105_setscl(void *data, int state)
+{
+	struct dm1105_dev *dev = data;
+
+	dm1105_setline(dev, dm1105_boards[dev->boardnr].gpio_scl, state);
+}
+
+static int dm1105_getsda(void *data)
+{
+	struct dm1105_dev *dev = data;
+
+	return dm1105_gpio_get(dev, dm1105_boards[dev->boardnr].gpio_sda)
+									? 1 : 0;
+}
+
+static int dm1105_getscl(void *data)
+{
+	struct dm1105_dev *dev = data;
+
+	return dm1105_gpio_get(dev, dm1105_boards[dev->boardnr].gpio_scl)
+									? 1 : 0;
+}
+
 static int dm1105_i2c_xfer(struct i2c_adapter *i2c_adap,
 			    struct i2c_msg *msgs, int num)
 {
@@ -436,31 +592,20 @@ static inline struct dm1105_dev *frontend_to_dm1105_dev(struct dvb_frontend *fe)
 static int dm1105_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
 {
 	struct dm1105_dev *dev = frontend_to_dm1105_dev(fe);
-	u32 lnb_mask, lnb_13v, lnb_18v, lnb_off;
 
-	switch (dev->boardnr) {
-	case DM1105_BOARD_AXESS_DM05:
-		lnb_mask = DM05_LNB_MASK;
-		lnb_off = DM05_LNB_OFF;
-		lnb_13v = DM05_LNB_13V;
-		lnb_18v = DM05_LNB_18V;
-		break;
-	case DM1105_BOARD_DVBWORLD_2002:
-	case DM1105_BOARD_DVBWORLD_2004:
-	default:
-		lnb_mask = DM1105_LNB_MASK;
-		lnb_off = DM1105_LNB_OFF;
-		lnb_13v = DM1105_LNB_13V;
-		lnb_18v = DM1105_LNB_18V;
-	}
-
-	dm_writel(DM1105_GPIOCTR, lnb_mask);
+	dm1105_gpio_enable(dev, dm1105_boards[dev->boardnr].lnb.mask, 1);
 	if (voltage == SEC_VOLTAGE_18)
-		dm_writel(DM1105_GPIOVAL, lnb_18v);
+		dm1105_gpio_andor(dev,
+				dm1105_boards[dev->boardnr].lnb.mask,
+				dm1105_boards[dev->boardnr].lnb.v18);
 	else if (voltage == SEC_VOLTAGE_13)
-		dm_writel(DM1105_GPIOVAL, lnb_13v);
+		dm1105_gpio_andor(dev,
+				dm1105_boards[dev->boardnr].lnb.mask,
+				dm1105_boards[dev->boardnr].lnb.v13);
 	else
-		dm_writel(DM1105_GPIOVAL, lnb_off);
+		dm1105_gpio_andor(dev,
+				dm1105_boards[dev->boardnr].lnb.mask,
+				dm1105_boards[dev->boardnr].lnb.off);
 
 	return 0;
 }
@@ -708,6 +853,38 @@ static int __devinit frontend_init(struct dm1105_dev *dev)
 	int ret;
 
 	switch (dev->boardnr) {
+	case DM1105_BOARD_UNBRANDED_I2C_ON_GPIO:
+		dm1105_gpio_enable(dev, GPIO15, 1);
+		dm1105_gpio_clear(dev, GPIO15);
+		msleep(100);
+		dm1105_gpio_set(dev, GPIO15);
+		msleep(200);
+		dev->fe = dvb_attach(
+			stv0299_attach, &sharp_z0194a_config,
+			&dev->i2c_bb_adap);
+		if (dev->fe) {
+			dev->fe->ops.set_voltage = dm1105_set_voltage;
+			dvb_attach(dvb_pll_attach, dev->fe, 0x60,
+					&dev->i2c_bb_adap, DVB_PLL_OPERA1);
+			break;
+		}
+
+		dev->fe = dvb_attach(
+			stv0288_attach, &earda_config,
+			&dev->i2c_bb_adap);
+		if (dev->fe) {
+			dev->fe->ops.set_voltage = dm1105_set_voltage;
+			dvb_attach(stb6000_attach, dev->fe, 0x61,
+					&dev->i2c_bb_adap);
+			break;
+		}
+
+		dev->fe = dvb_attach(
+			si21xx_attach, &serit_config,
+			&dev->i2c_bb_adap);
+		if (dev->fe)
+			dev->fe->ops.set_voltage = dm1105_set_voltage;
+		break;
 	case DM1105_BOARD_DVBWORLD_2004:
 		dev->fe = dvb_attach(
 			cx24116_attach, &serit_sp2633_config,
@@ -870,11 +1047,32 @@ static int __devinit dm1105_probe(struct pci_dev *pdev,
 	if (ret < 0)
 		goto err_dm1105_hw_exit;
 
+	i2c_set_adapdata(&dev->i2c_bb_adap, dev);
+	strcpy(dev->i2c_bb_adap.name, DM1105_I2C_GPIO_NAME);
+	dev->i2c_bb_adap.owner = THIS_MODULE;
+	dev->i2c_bb_adap.dev.parent = &pdev->dev;
+	dev->i2c_bb_adap.algo_data = &dev->i2c_bit;
+	dev->i2c_bit.data = dev;
+	dev->i2c_bit.setsda = dm1105_setsda;
+	dev->i2c_bit.setscl = dm1105_setscl;
+	dev->i2c_bit.getsda = dm1105_getsda;
+	dev->i2c_bit.getscl = dm1105_getscl;
+	dev->i2c_bit.udelay = 10;
+	dev->i2c_bit.timeout = 10;
+
+	/* Raise SCL and SDA */
+	dm1105_setsda(dev, 1);
+	dm1105_setscl(dev, 1);
+
+	ret = i2c_bit_add_bus(&dev->i2c_bb_adap);
+	if (ret < 0)
+		goto err_i2c_del_adapter;
+
 	/* dvb */
 	ret = dvb_register_adapter(&dev->dvb_adapter, DRIVER_NAME,
 					THIS_MODULE, &pdev->dev, adapter_nr);
 	if (ret < 0)
-		goto err_i2c_del_adapter;
+		goto err_i2c_del_adapters;
 
 	dvb_adapter = &dev->dvb_adapter;
 
@@ -952,6 +1150,8 @@ err_dvb_dmx_release:
 	dvb_dmx_release(dvbdemux);
 err_dvb_unregister_adapter:
 	dvb_unregister_adapter(dvb_adapter);
+err_i2c_del_adapters:
+	i2c_del_adapter(&dev->i2c_bb_adap);
 err_i2c_del_adapter:
 	i2c_del_adapter(&dev->i2c_adap);
 err_dm1105_hw_exit:

drivers/media/dvb/dvb-usb/lmedm04.c

@@ -207,17 +207,6 @@ static int lme2510_stream_restart(struct dvb_usb_device *d)
 			rbuff, sizeof(rbuff));
 	return ret;
 }
-static int lme2510_remote_keypress(struct dvb_usb_adapter *adap, u32 keypress)
-{
-	struct dvb_usb_device *d = adap->dev;
-
-	deb_info(1, "INT Key Keypress =%04x", keypress);
-
-	if (keypress > 0)
-		rc_keydown(d->rc_dev, keypress, 0);
-
-	return 0;
-}
 
 static int lme2510_enable_pid(struct dvb_usb_device *d, u8 index, u16 pid_out)
 {
@@ -256,6 +245,7 @@ static void lme2510_int_response(struct urb *lme_urb)
 	struct lme2510_state *st = adap->dev->priv;
 	static u8 *ibuf, *rbuf;
 	int i = 0, offset;
+	u32 key;
 
 	switch (lme_urb->status) {
 	case 0:
@@ -282,10 +272,16 @@ static void lme2510_int_response(struct urb *lme_urb)
 
 		switch (ibuf[0]) {
 		case 0xaa:
-			debug_data_snipet(1, "INT Remote data snipet in", ibuf);
-			lme2510_remote_keypress(adap,
-				(u32)(ibuf[2] << 24) + (ibuf[3] << 16) +
-				(ibuf[4] << 8) + ibuf[5]);
+			debug_data_snipet(1, "INT Remote data snipet", ibuf);
+			if ((ibuf[4] + ibuf[5]) == 0xff) {
+				key = ibuf[5];
+				key += (ibuf[3] > 0)
+					? (ibuf[3] ^ 0xff) << 8 : 0;
+				key += (ibuf[2] ^ 0xff) << 16;
+				deb_info(1, "INT Key =%08x", key);
+				if (adap->dev->rc_dev != NULL)
+					rc_keydown(adap->dev->rc_dev, key, 0);
+			}
 			break;
 		case 0xbb:
 			switch (st->tuner_config) {
@@ -691,45 +687,6 @@ static int lme2510_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
 	return (ret < 0) ? -ENODEV : 0;
 }
 
-static int lme2510_int_service(struct dvb_usb_adapter *adap)
-{
-	struct dvb_usb_device *d = adap->dev;
-	struct rc_dev *rc;
-	int ret;
-
-	info("STA Configuring Remote");
-
-	rc = rc_allocate_device();
-	if (!rc)
-		return -ENOMEM;
-
-	usb_make_path(d->udev, d->rc_phys, sizeof(d->rc_phys));
-	strlcat(d->rc_phys, "/ir0", sizeof(d->rc_phys));
-
-	rc->input_name = "LME2510 Remote Control";
-	rc->input_phys = d->rc_phys;
-	rc->map_name = RC_MAP_LME2510;
-	rc->driver_name = "LME 2510";
-	usb_to_input_id(d->udev, &rc->input_id);
-
-	ret = rc_register_device(rc);
-	if (ret) {
-		rc_free_device(rc);
-		return ret;
-	}
-	d->rc_dev = rc;
-
-	/* Start the Interrupt */
-	ret = lme2510_int_read(adap);
-	if (ret < 0) {
-		rc_unregister_device(rc);
-		info("INT Unable to start Interrupt Service");
-		return -ENODEV;
-	}
-
-	return 0;
-}
-
 static u8 check_sum(u8 *p, u8 len)
 {
 	u8 sum = 0;
@@ -831,7 +788,7 @@ static int lme_firmware_switch(struct usb_device *udev, int cold)
 
 	cold_fw = !cold;
 
-	if (udev->descriptor.idProduct == 0x1122) {
+	if (le16_to_cpu(udev->descriptor.idProduct) == 0x1122) {
 		switch (dvb_usb_lme2510_firmware) {
 		default:
 			dvb_usb_lme2510_firmware = TUNER_S0194;
@@ -1053,8 +1010,11 @@ static int dm04_lme2510_frontend_attach(struct dvb_usb_adapter *adap)
 
 
 end:	if (ret) {
-		kfree(adap->fe);
-		adap->fe = NULL;
+		if (adap->fe) {
+			dvb_frontend_detach(adap->fe);
+			adap->fe = NULL;
+		}
+		adap->dev->props.rc.core.rc_codes = NULL;
 		return -ENODEV;
 	}
 
@@ -1097,8 +1057,12 @@ static int dm04_lme2510_tuner(struct dvb_usb_adapter *adap)
 		return -ENODEV;
 	}
 
-	/* Start the Interrupt & Remote*/
-	ret = lme2510_int_service(adap);
+	/* Start the Interrupt*/
+	ret = lme2510_int_read(adap);
+	if (ret < 0) {
+		info("INT Unable to start Interrupt Service");
+		return -ENODEV;
+	}
 
 	return ret;
 }
@@ -1204,6 +1168,12 @@ static struct dvb_usb_device_properties lme2510_properties = {
 			}
 		}
 	},
+	.rc.core = {
+		.protocol	= RC_TYPE_NEC,
+		.module_name	= "LME2510 Remote Control",
+		.allowed_protos	= RC_TYPE_NEC,
+		.rc_codes	= RC_MAP_LME2510,
+	},
 	.power_ctrl       = lme2510_powerup,
 	.identify_state   = lme2510_identify_state,
 	.i2c_algo         = &lme2510_i2c_algo,
@@ -1246,6 +1216,12 @@ static struct dvb_usb_device_properties lme2510c_properties = {
 			}
 		}
 	},
+	.rc.core = {
+		.protocol	= RC_TYPE_NEC,
+		.module_name	= "LME2510 Remote Control",
+		.allowed_protos	= RC_TYPE_NEC,
+		.rc_codes	= RC_MAP_LME2510,
+	},
 	.power_ctrl       = lme2510_powerup,
 	.identify_state   = lme2510_identify_state,
 	.i2c_algo         = &lme2510_i2c_algo,
@@ -1269,19 +1245,21 @@ static void *lme2510_exit_int(struct dvb_usb_device *d)
 		adap->feedcount = 0;
 	}
 
-	if (st->lme_urb != NULL) {
+	if (st->usb_buffer != NULL) {
 		st->i2c_talk_onoff = 1;
 		st->signal_lock = 0;
 		st->signal_level = 0;
 		st->signal_sn = 0;
 		buffer = st->usb_buffer;
+	}
+
+	if (st->lme_urb != NULL) {
 		usb_kill_urb(st->lme_urb);
 		usb_free_coherent(d->udev, 5000, st->buffer,
 				  st->lme_urb->transfer_dma);
 		info("Interrupt Service Stopped");
-		rc_unregister_device(d->rc_dev);
-		info("Remote Stopped");
 	}
+
 	return buffer;
 }
 
@@ -1293,7 +1271,8 @@ static void lme2510_exit(struct usb_interface *intf)
 	if (d != NULL) {
 		usb_buffer = lme2510_exit_int(d);
 		dvb_usb_device_exit(intf);
-		kfree(usb_buffer);
+		if (usb_buffer != NULL)
+			kfree(usb_buffer);
 	}
 }
 
@@ -1327,5 +1306,5 @@ module_exit(lme2510_module_exit);
 
 MODULE_AUTHOR("Malcolm Priestley <tvboxspy@gmail.com>");
 MODULE_DESCRIPTION("LME2510(C) DVB-S USB2.0");
-MODULE_VERSION("1.86");
+MODULE_VERSION("1.88");
 MODULE_LICENSE("GPL");

drivers/media/dvb/frontends/stb0899_algo.c

@@ -23,7 +23,7 @@
 #include "stb0899_priv.h"
 #include "stb0899_reg.h"
 
-inline u32 stb0899_do_div(u64 n, u32 d)
+static inline u32 stb0899_do_div(u64 n, u32 d)
 {
 	/* wrap do_div() for ease of use */
 

drivers/media/dvb/frontends/tda8261.c

@@ -224,7 +224,6 @@ exit:
 }
 
 EXPORT_SYMBOL(tda8261_attach);
-MODULE_PARM_DESC(verbose, "Set verbosity level");
 
 MODULE_AUTHOR("Manu Abraham");
 MODULE_DESCRIPTION("TDA8261 8PSK/QPSK Tuner");

drivers/media/radio/radio-wl1273.c

@@ -1382,7 +1382,7 @@ static int wl1273_fm_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
 
 	switch (ctrl->id) {
 	case  V4L2_CID_TUNE_ANTENNA_CAPACITOR:
-		ctrl->val = wl1273_fm_get_tx_ctune(radio);
+		ctrl->cur.val = wl1273_fm_get_tx_ctune(radio);
 		break;
 
 	default:

drivers/media/radio/wl128x/fmdrv_v4l2.c

@@ -191,7 +191,7 @@ static int fm_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
 
 	switch (ctrl->id) {
 	case  V4L2_CID_TUNE_ANTENNA_CAPACITOR:
-		ctrl->val = fm_tx_get_tune_cap_val(fmdev);
+		ctrl->cur.val = fm_tx_get_tune_cap_val(fmdev);
 		break;
 	default:
 		fmwarn("%s: Unknown IOCTL: %d\n", __func__, ctrl->id);

drivers/media/rc/Kconfig

@@ -148,6 +148,18 @@ config IR_ITE_CIR
 	   To compile this driver as a module, choose M here: the
 	   module will be called ite-cir.
 
+config IR_FINTEK
+	tristate "Fintek Consumer Infrared Transceiver"
+	depends on PNP
+	depends on RC_CORE
+	---help---
+	   Say Y here to enable support for integrated infrared receiver
+	   /transciever made by Fintek. This chip is found on assorted
+	   Jetway motherboards (and of course, possibly others).
+
+	   To compile this driver as a module, choose M here: the
+	   module will be called fintek-cir.
+
 config IR_NUVOTON
 	tristate "Nuvoton w836x7hg Consumer Infrared Transceiver"
 	depends on PNP

drivers/media/rc/Makefile

@@ -16,6 +16,7 @@ obj-$(CONFIG_IR_LIRC_CODEC) += ir-lirc-codec.o
 obj-$(CONFIG_IR_IMON) += imon.o
 obj-$(CONFIG_IR_ITE_CIR) += ite-cir.o
 obj-$(CONFIG_IR_MCEUSB) += mceusb.o
+obj-$(CONFIG_IR_FINTEK) += fintek-cir.o
 obj-$(CONFIG_IR_NUVOTON) += nuvoton-cir.o
 obj-$(CONFIG_IR_ENE) += ene_ir.o
 obj-$(CONFIG_IR_REDRAT3) += redrat3.o

drivers/media/rc/fintek-cir.c

@@ -0,0 +1,684 @@
+/*
+ * Driver for Feature Integration Technology Inc. (aka Fintek) LPC CIR
+ *
+ * Copyright (C) 2011 Jarod Wilson <jarod@redhat.com>
+ *
+ * Special thanks to Fintek for providing hardware and spec sheets.
+ * This driver is based upon the nuvoton, ite and ene drivers for
+ * similar hardware.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pnp.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <media/rc-core.h>
+#include <linux/pci_ids.h>
+
+#include "fintek-cir.h"
+
+/* write val to config reg */
+static inline void fintek_cr_write(struct fintek_dev *fintek, u8 val, u8 reg)
+{
+	fit_dbg("%s: reg 0x%02x, val 0x%02x  (ip/dp: %02x/%02x)",
+		__func__, reg, val, fintek->cr_ip, fintek->cr_dp);
+	outb(reg, fintek->cr_ip);
+	outb(val, fintek->cr_dp);
+}
+
+/* read val from config reg */
+static inline u8 fintek_cr_read(struct fintek_dev *fintek, u8 reg)
+{
+	u8 val;
+
+	outb(reg, fintek->cr_ip);
+	val = inb(fintek->cr_dp);
+
+	fit_dbg("%s: reg 0x%02x, val 0x%02x  (ip/dp: %02x/%02x)",
+		__func__, reg, val, fintek->cr_ip, fintek->cr_dp);
+	return val;
+}
+
+/* update config register bit without changing other bits */
+static inline void fintek_set_reg_bit(struct fintek_dev *fintek, u8 val, u8 reg)
+{
+	u8 tmp = fintek_cr_read(fintek, reg) | val;
+	fintek_cr_write(fintek, tmp, reg);
+}
+
+/* clear config register bit without changing other bits */
+static inline void fintek_clear_reg_bit(struct fintek_dev *fintek, u8 val, u8 reg)
+{
+	u8 tmp = fintek_cr_read(fintek, reg) & ~val;
+	fintek_cr_write(fintek, tmp, reg);
+}
+
+/* enter config mode */
+static inline void fintek_config_mode_enable(struct fintek_dev *fintek)
+{
+	/* Enabling Config Mode explicitly requires writing 2x */
+	outb(CONFIG_REG_ENABLE, fintek->cr_ip);
+	outb(CONFIG_REG_ENABLE, fintek->cr_ip);
+}
+
+/* exit config mode */
+static inline void fintek_config_mode_disable(struct fintek_dev *fintek)
+{
+	outb(CONFIG_REG_DISABLE, fintek->cr_ip);
+}
+
+/*
+ * When you want to address a specific logical device, write its logical
+ * device number to GCR_LOGICAL_DEV_NO
+ */
+static inline void fintek_select_logical_dev(struct fintek_dev *fintek, u8 ldev)
+{
+	fintek_cr_write(fintek, ldev, GCR_LOGICAL_DEV_NO);
+}
+
+/* write val to cir config register */
+static inline void fintek_cir_reg_write(struct fintek_dev *fintek, u8 val, u8 offset)
+{
+	outb(val, fintek->cir_addr + offset);
+}
+
+/* read val from cir config register */
+static u8 fintek_cir_reg_read(struct fintek_dev *fintek, u8 offset)
+{
+	u8 val;
+
+	val = inb(fintek->cir_addr + offset);
+
+	return val;
+}
+
+#define pr_reg(text, ...) \
+	printk(KERN_INFO KBUILD_MODNAME ": " text, ## __VA_ARGS__)
+
+/* dump current cir register contents */
+static void cir_dump_regs(struct fintek_dev *fintek)
+{
+	fintek_config_mode_enable(fintek);
+	fintek_select_logical_dev(fintek, LOGICAL_DEV_CIR);
+
+	pr_reg("%s: Dump CIR logical device registers:\n", FINTEK_DRIVER_NAME);
+	pr_reg(" * CR CIR BASE ADDR: 0x%x\n",
+	       (fintek_cr_read(fintek, CIR_CR_BASE_ADDR_HI) << 8) |
+		fintek_cr_read(fintek, CIR_CR_BASE_ADDR_LO));
+	pr_reg(" * CR CIR IRQ NUM:   0x%x\n",
+	       fintek_cr_read(fintek, CIR_CR_IRQ_SEL));
+
+	fintek_config_mode_disable(fintek);
+
+	pr_reg("%s: Dump CIR registers:\n", FINTEK_DRIVER_NAME);
+	pr_reg(" * STATUS:     0x%x\n", fintek_cir_reg_read(fintek, CIR_STATUS));
+	pr_reg(" * CONTROL:    0x%x\n", fintek_cir_reg_read(fintek, CIR_CONTROL));
+	pr_reg(" * RX_DATA:    0x%x\n", fintek_cir_reg_read(fintek, CIR_RX_DATA));
+	pr_reg(" * TX_CONTROL: 0x%x\n", fintek_cir_reg_read(fintek, CIR_TX_CONTROL));
+	pr_reg(" * TX_DATA:    0x%x\n", fintek_cir_reg_read(fintek, CIR_TX_DATA));
+}
+
+/* detect hardware features */
+static int fintek_hw_detect(struct fintek_dev *fintek)
+{
+	unsigned long flags;
+	u8 chip_major, chip_minor;
+	u8 vendor_major, vendor_minor;
+	u8 portsel, ir_class;
+	u16 vendor;
+	int ret = 0;
+
+	fintek_config_mode_enable(fintek);
+
+	/* Check if we're using config port 0x4e or 0x2e */
+	portsel = fintek_cr_read(fintek, GCR_CONFIG_PORT_SEL);
+	if (portsel == 0xff) {
+		fit_pr(KERN_INFO, "first portsel read was bunk, trying alt");
+		fintek_config_mode_disable(fintek);
+		fintek->cr_ip = CR_INDEX_PORT2;
+		fintek->cr_dp = CR_DATA_PORT2;
+		fintek_config_mode_enable(fintek);
+		portsel = fintek_cr_read(fintek, GCR_CONFIG_PORT_SEL);
+	}
+	fit_dbg("portsel reg: 0x%02x", portsel);
+
+	ir_class = fintek_cir_reg_read(fintek, CIR_CR_CLASS);
+	fit_dbg("ir_class reg: 0x%02x", ir_class);
+
+	switch (ir_class) {
+	case CLASS_RX_2TX:
+	case CLASS_RX_1TX:
+		fintek->hw_tx_capable = true;
+		break;
+	case CLASS_RX_ONLY:
+	default:
+		fintek->hw_tx_capable = false;
+		break;
+	}
+
+	chip_major = fintek_cr_read(fintek, GCR_CHIP_ID_HI);
+	chip_minor = fintek_cr_read(fintek, GCR_CHIP_ID_LO);
+
+	vendor_major = fintek_cr_read(fintek, GCR_VENDOR_ID_HI);
+	vendor_minor = fintek_cr_read(fintek, GCR_VENDOR_ID_LO);
+	vendor = vendor_major << 8 | vendor_minor;
+
+	if (vendor != VENDOR_ID_FINTEK)
+		fit_pr(KERN_WARNING, "Unknown vendor ID: 0x%04x", vendor);
+	else
+		fit_dbg("Read Fintek vendor ID from chip");
+
+	fintek_config_mode_disable(fintek);
+
+	spin_lock_irqsave(&fintek->fintek_lock, flags);
+	fintek->chip_major  = chip_major;
+	fintek->chip_minor  = chip_minor;
+	fintek->chip_vendor = vendor;
+	spin_unlock_irqrestore(&fintek->fintek_lock, flags);
+
+	return ret;
+}
+
+static void fintek_cir_ldev_init(struct fintek_dev *fintek)
+{
+	/* Select CIR logical device and enable */
+	fintek_select_logical_dev(fintek, LOGICAL_DEV_CIR);
+	fintek_cr_write(fintek, LOGICAL_DEV_ENABLE, CIR_CR_DEV_EN);
+
+	/* Write allocated CIR address and IRQ information to hardware */
+	fintek_cr_write(fintek, fintek->cir_addr >> 8, CIR_CR_BASE_ADDR_HI);
+	fintek_cr_write(fintek, fintek->cir_addr & 0xff, CIR_CR_BASE_ADDR_LO);
+
+	fintek_cr_write(fintek, fintek->cir_irq, CIR_CR_IRQ_SEL);
+
+	fit_dbg("CIR initialized, base io address: 0x%lx, irq: %d (len: %d)",
+		fintek->cir_addr, fintek->cir_irq, fintek->cir_port_len);
+}
+
+/* enable CIR interrupts */
+static void fintek_enable_cir_irq(struct fintek_dev *fintek)
+{
+	fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_EN, CIR_STATUS);
+}
+
+static void fintek_cir_regs_init(struct fintek_dev *fintek)
+{
+	/* clear any and all stray interrupts */
+	fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_MASK, CIR_STATUS);
+
+	/* and finally, enable interrupts */
+	fintek_enable_cir_irq(fintek);
+}
+
+static void fintek_enable_wake(struct fintek_dev *fintek)
+{
+	fintek_config_mode_enable(fintek);
+	fintek_select_logical_dev(fintek, LOGICAL_DEV_ACPI);
+
+	/* Allow CIR PME's to wake system */
+	fintek_set_reg_bit(fintek, ACPI_WAKE_EN_CIR_BIT, LDEV_ACPI_WAKE_EN_REG);
+	/* Enable CIR PME's */
+	fintek_set_reg_bit(fintek, ACPI_PME_CIR_BIT, LDEV_ACPI_PME_EN_REG);
+	/* Clear CIR PME status register */
+	fintek_set_reg_bit(fintek, ACPI_PME_CIR_BIT, LDEV_ACPI_PME_CLR_REG);
+	/* Save state */
+	fintek_set_reg_bit(fintek, ACPI_STATE_CIR_BIT, LDEV_ACPI_STATE_REG);
+
+	fintek_config_mode_disable(fintek);
+}
+
+static int fintek_cmdsize(u8 cmd, u8 subcmd)
+{
+	int datasize = 0;
+
+	switch (cmd) {
+	case BUF_COMMAND_NULL:
+		if (subcmd == BUF_HW_CMD_HEADER)
+			datasize = 1;
+		break;
+	case BUF_HW_CMD_HEADER:
+		if (subcmd == BUF_CMD_G_REVISION)
+			datasize = 2;
+		break;
+	case BUF_COMMAND_HEADER:
+		switch (subcmd) {
+		case BUF_CMD_S_CARRIER:
+		case BUF_CMD_S_TIMEOUT:
+		case BUF_RSP_PULSE_COUNT:
+			datasize = 2;
+			break;
+		case BUF_CMD_SIG_END:
+		case BUF_CMD_S_TXMASK:
+		case BUF_CMD_S_RXSENSOR:
+			datasize = 1;
+			break;
+		}
+	}
+
+	return datasize;
+}
+
+/* process ir data stored in driver buffer */
+static void fintek_process_rx_ir_data(struct fintek_dev *fintek)
+{
+	DEFINE_IR_RAW_EVENT(rawir);
+	u8 sample;
+	int i;
+
+	for (i = 0; i < fintek->pkts; i++) {
+		sample = fintek->buf[i];
+		switch (fintek->parser_state) {
+		case CMD_HEADER:
+			fintek->cmd = sample;
+			if ((fintek->cmd == BUF_COMMAND_HEADER) ||
+			    ((fintek->cmd & BUF_COMMAND_MASK) !=
+			     BUF_PULSE_BIT)) {
+				fintek->parser_state = SUBCMD;
+				continue;
+			}
+			fintek->rem = (fintek->cmd & BUF_LEN_MASK);
+			fit_dbg("%s: rem: 0x%02x", __func__, fintek->rem);
+			if (fintek->rem)
+				fintek->parser_state = PARSE_IRDATA;
+			else
+				ir_raw_event_reset(fintek->rdev);
+			break;
+		case SUBCMD:
+			fintek->rem = fintek_cmdsize(fintek->cmd, sample);
+			fintek->parser_state = CMD_DATA;
+			break;
+		case CMD_DATA:
+			fintek->rem--;
+			break;
+		case PARSE_IRDATA:
+			fintek->rem--;
+			init_ir_raw_event(&rawir);
+			rawir.pulse = ((sample & BUF_PULSE_BIT) != 0);
+			rawir.duration = US_TO_NS((sample & BUF_SAMPLE_MASK)
+					  * CIR_SAMPLE_PERIOD);
+
+			fit_dbg("Storing %s with duration %d",
+				rawir.pulse ? "pulse" : "space",
+				rawir.duration);
+			ir_raw_event_store_with_filter(fintek->rdev, &rawir);
+			break;
+		}
+
+		if ((fintek->parser_state != CMD_HEADER) && !fintek->rem)
+			fintek->parser_state = CMD_HEADER;
+	}
+
+	fintek->pkts = 0;
+
+	fit_dbg("Calling ir_raw_event_handle");
+	ir_raw_event_handle(fintek->rdev);
+}
+
+/* copy data from hardware rx register into driver buffer */
+static void fintek_get_rx_ir_data(struct fintek_dev *fintek, u8 rx_irqs)
+{
+	unsigned long flags;
+	u8 sample, status;
+
+	spin_lock_irqsave(&fintek->fintek_lock, flags);
+
+	/*
+	 * We must read data from CIR_RX_DATA until the hardware IR buffer
+	 * is empty and clears the RX_TIMEOUT and/or RX_RECEIVE flags in
+	 * the CIR_STATUS register
+	 */
+	do {
+		sample = fintek_cir_reg_read(fintek, CIR_RX_DATA);
+		fit_dbg("%s: sample: 0x%02x", __func__, sample);
+
+		fintek->buf[fintek->pkts] = sample;
+		fintek->pkts++;
+
+		status = fintek_cir_reg_read(fintek, CIR_STATUS);
+		if (!(status & CIR_STATUS_IRQ_EN))
+			break;
+	} while (status & rx_irqs);
+
+	fintek_process_rx_ir_data(fintek);
+
+	spin_unlock_irqrestore(&fintek->fintek_lock, flags);
+}
+
+static void fintek_cir_log_irqs(u8 status)
+{
+	fit_pr(KERN_INFO, "IRQ 0x%02x:%s%s%s%s%s", status,
+		status & CIR_STATUS_IRQ_EN	? " IRQEN"	: "",
+		status & CIR_STATUS_TX_FINISH	? " TXF"	: "",
+		status & CIR_STATUS_TX_UNDERRUN	? " TXU"	: "",
+		status & CIR_STATUS_RX_TIMEOUT	? " RXTO"	: "",
+		status & CIR_STATUS_RX_RECEIVE	? " RXOK"	: "");
+}
+
+/* interrupt service routine for incoming and outgoing CIR data */
+static irqreturn_t fintek_cir_isr(int irq, void *data)
+{
+	struct fintek_dev *fintek = data;
+	u8 status, rx_irqs;
+
+	fit_dbg_verbose("%s firing", __func__);
+
+	fintek_config_mode_enable(fintek);
+	fintek_select_logical_dev(fintek, LOGICAL_DEV_CIR);
+	fintek_config_mode_disable(fintek);
+
+	/*
+	 * Get IR Status register contents. Write 1 to ack/clear
+	 *
+	 * bit: reg name    - description
+	 *   3: TX_FINISH   - TX is finished
+	 *   2: TX_UNDERRUN - TX underrun
+	 *   1: RX_TIMEOUT  - RX data timeout
+	 *   0: RX_RECEIVE  - RX data received
+	 */
+	status = fintek_cir_reg_read(fintek, CIR_STATUS);
+	if (!(status & CIR_STATUS_IRQ_MASK) || status == 0xff) {
+		fit_dbg_verbose("%s exiting, IRSTS 0x%02x", __func__, status);
+		fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_MASK, CIR_STATUS);
+		return IRQ_RETVAL(IRQ_NONE);
+	}
+
+	if (debug)
+		fintek_cir_log_irqs(status);
+
+	rx_irqs = status & (CIR_STATUS_RX_RECEIVE | CIR_STATUS_RX_TIMEOUT);
+	if (rx_irqs)
+		fintek_get_rx_ir_data(fintek, rx_irqs);
+
+	/* ack/clear all irq flags we've got */
+	fintek_cir_reg_write(fintek, status, CIR_STATUS);
+
+	fit_dbg_verbose("%s done", __func__);
+	return IRQ_RETVAL(IRQ_HANDLED);
+}
+
+static void fintek_enable_cir(struct fintek_dev *fintek)
+{
+	/* set IRQ enabled */
+	fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_EN, CIR_STATUS);
+
+	fintek_config_mode_enable(fintek);
+
+	/* enable the CIR logical device */
+	fintek_select_logical_dev(fintek, LOGICAL_DEV_CIR);
+	fintek_cr_write(fintek, LOGICAL_DEV_ENABLE, CIR_CR_DEV_EN);
+
+	fintek_config_mode_disable(fintek);
+
+	/* clear all pending interrupts */
+	fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_MASK, CIR_STATUS);
+
+	/* enable interrupts */
+	fintek_enable_cir_irq(fintek);
+}
+
+static void fintek_disable_cir(struct fintek_dev *fintek)
+{
+	fintek_config_mode_enable(fintek);
+
+	/* disable the CIR logical device */
+	fintek_select_logical_dev(fintek, LOGICAL_DEV_CIR);
+	fintek_cr_write(fintek, LOGICAL_DEV_DISABLE, CIR_CR_DEV_EN);
+
+	fintek_config_mode_disable(fintek);
+}
+
+static int fintek_open(struct rc_dev *dev)
+{
+	struct fintek_dev *fintek = dev->priv;
+	unsigned long flags;
+
+	spin_lock_irqsave(&fintek->fintek_lock, flags);
+	fintek_enable_cir(fintek);
+	spin_unlock_irqrestore(&fintek->fintek_lock, flags);
+
+	return 0;
+}
+
+static void fintek_close(struct rc_dev *dev)
+{
+	struct fintek_dev *fintek = dev->priv;
+	unsigned long flags;
+
+	spin_lock_irqsave(&fintek->fintek_lock, flags);
+	fintek_disable_cir(fintek);
+	spin_unlock_irqrestore(&fintek->fintek_lock, flags);
+}
+
+/* Allocate memory, probe hardware, and initialize everything */
+static int fintek_probe(struct pnp_dev *pdev, const struct pnp_device_id *dev_id)
+{
+	struct fintek_dev *fintek;
+	struct rc_dev *rdev;
+	int ret = -ENOMEM;
+
+	fintek = kzalloc(sizeof(struct fintek_dev), GFP_KERNEL);
+	if (!fintek)
+		return ret;
+
+	/* input device for IR remote (and tx) */
+	rdev = rc_allocate_device();
+	if (!rdev)
+		goto failure;
+
+	ret = -ENODEV;
+	/* validate pnp resources */
+	if (!pnp_port_valid(pdev, 0)) {
+		dev_err(&pdev->dev, "IR PNP Port not valid!\n");
+		goto failure;
+	}
+
+	if (!pnp_irq_valid(pdev, 0)) {
+		dev_err(&pdev->dev, "IR PNP IRQ not valid!\n");
+		goto failure;
+	}
+
+	fintek->cir_addr = pnp_port_start(pdev, 0);
+	fintek->cir_irq  = pnp_irq(pdev, 0);
+	fintek->cir_port_len = pnp_port_len(pdev, 0);
+
+	fintek->cr_ip = CR_INDEX_PORT;
+	fintek->cr_dp = CR_DATA_PORT;
+
+	spin_lock_init(&fintek->fintek_lock);
+
+	ret = -EBUSY;
+	/* now claim resources */
+	if (!request_region(fintek->cir_addr,
+			    fintek->cir_port_len, FINTEK_DRIVER_NAME))
+		goto failure;
+
+	if (request_irq(fintek->cir_irq, fintek_cir_isr, IRQF_SHARED,
+			FINTEK_DRIVER_NAME, (void *)fintek))
+		goto failure;
+
+	pnp_set_drvdata(pdev, fintek);
+	fintek->pdev = pdev;
+
+	ret = fintek_hw_detect(fintek);
+	if (ret)
+		goto failure;
+
+	/* Initialize CIR & CIR Wake Logical Devices */
+	fintek_config_mode_enable(fintek);
+	fintek_cir_ldev_init(fintek);
+	fintek_config_mode_disable(fintek);
+
+	/* Initialize CIR & CIR Wake Config Registers */
+	fintek_cir_regs_init(fintek);
+
+	/* Set up the rc device */
+	rdev->priv = fintek;
+	rdev->driver_type = RC_DRIVER_IR_RAW;
+	rdev->allowed_protos = RC_TYPE_ALL;
+	rdev->open = fintek_open;
+	rdev->close = fintek_close;
+	rdev->input_name = FINTEK_DESCRIPTION;
+	rdev->input_phys = "fintek/cir0";
+	rdev->input_id.bustype = BUS_HOST;
+	rdev->input_id.vendor = VENDOR_ID_FINTEK;
+	rdev->input_id.product = fintek->chip_major;
+	rdev->input_id.version = fintek->chip_minor;
+	rdev->dev.parent = &pdev->dev;
+	rdev->driver_name = FINTEK_DRIVER_NAME;
+	rdev->map_name = RC_MAP_RC6_MCE;
+	rdev->timeout = US_TO_NS(1000);
+	/* rx resolution is hardwired to 50us atm, 1, 25, 100 also possible */
+	rdev->rx_resolution = US_TO_NS(CIR_SAMPLE_PERIOD);
+
+	ret = rc_register_device(rdev);
+	if (ret)
+		goto failure;
+
+	device_init_wakeup(&pdev->dev, true);
+	fintek->rdev = rdev;
+	fit_pr(KERN_NOTICE, "driver has been successfully loaded\n");
+	if (debug)
+		cir_dump_regs(fintek);
+
+	return 0;
+
+failure:
+	if (fintek->cir_irq)
+		free_irq(fintek->cir_irq, fintek);
+	if (fintek->cir_addr)
+		release_region(fintek->cir_addr, fintek->cir_port_len);
+
+	rc_free_device(rdev);
+	kfree(fintek);
+
+	return ret;
+}
+
+static void __devexit fintek_remove(struct pnp_dev *pdev)
+{
+	struct fintek_dev *fintek = pnp_get_drvdata(pdev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&fintek->fintek_lock, flags);
+	/* disable CIR */
+	fintek_disable_cir(fintek);
+	fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_MASK, CIR_STATUS);
+	/* enable CIR Wake (for IR power-on) */
+	fintek_enable_wake(fintek);
+	spin_unlock_irqrestore(&fintek->fintek_lock, flags);
+
+	/* free resources */
+	free_irq(fintek->cir_irq, fintek);
+	release_region(fintek->cir_addr, fintek->cir_port_len);
+
+	rc_unregister_device(fintek->rdev);
+
+	kfree(fintek);
+}
+
+static int fintek_suspend(struct pnp_dev *pdev, pm_message_t state)
+{
+	struct fintek_dev *fintek = pnp_get_drvdata(pdev);
+
+	fit_dbg("%s called", __func__);
+
+	/* disable all CIR interrupts */
+	fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_MASK, CIR_STATUS);
+
+	fintek_config_mode_enable(fintek);
+
+	/* disable cir logical dev */
+	fintek_select_logical_dev(fintek, LOGICAL_DEV_CIR);
+	fintek_cr_write(fintek, LOGICAL_DEV_DISABLE, CIR_CR_DEV_EN);
+
+	fintek_config_mode_disable(fintek);
+
+	/* make sure wake is enabled */
+	fintek_enable_wake(fintek);
+
+	return 0;
+}
+
+static int fintek_resume(struct pnp_dev *pdev)
+{
+	int ret = 0;
+	struct fintek_dev *fintek = pnp_get_drvdata(pdev);
+
+	fit_dbg("%s called", __func__);
+
+	/* open interrupt */
+	fintek_enable_cir_irq(fintek);
+
+	/* Enable CIR logical device */
+	fintek_config_mode_enable(fintek);
+	fintek_select_logical_dev(fintek, LOGICAL_DEV_CIR);
+	fintek_cr_write(fintek, LOGICAL_DEV_ENABLE, CIR_CR_DEV_EN);
+
+	fintek_config_mode_disable(fintek);
+
+	fintek_cir_regs_init(fintek);
+
+	return ret;
+}
+
+static void fintek_shutdown(struct pnp_dev *pdev)
+{
+	struct fintek_dev *fintek = pnp_get_drvdata(pdev);
+	fintek_enable_wake(fintek);
+}
+
+static const struct pnp_device_id fintek_ids[] = {
+	{ "FIT0002", 0 },   /* CIR */
+	{ "", 0 },
+};
+
+static struct pnp_driver fintek_driver = {
+	.name		= FINTEK_DRIVER_NAME,
+	.id_table	= fintek_ids,
+	.flags		= PNP_DRIVER_RES_DO_NOT_CHANGE,
+	.probe		= fintek_probe,
+	.remove		= __devexit_p(fintek_remove),
+	.suspend	= fintek_suspend,
+	.resume		= fintek_resume,
+	.shutdown	= fintek_shutdown,
+};
+
+int fintek_init(void)
+{
+	return pnp_register_driver(&fintek_driver);
+}
+
+void fintek_exit(void)
+{
+	pnp_unregister_driver(&fintek_driver);
+}
+
+module_param(debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Enable debugging output");
+
+MODULE_DEVICE_TABLE(pnp, fintek_ids);
+MODULE_DESCRIPTION(FINTEK_DESCRIPTION " driver");
+
+MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
+MODULE_LICENSE("GPL");
+
+module_init(fintek_init);
+module_exit(fintek_exit);

drivers/media/rc/fintek-cir.h

@@ -0,0 +1,243 @@
+/*
+ * Driver for Feature Integration Technology Inc. (aka Fintek) LPC CIR
+ *
+ * Copyright (C) 2011 Jarod Wilson <jarod@redhat.com>
+ *
+ * Special thanks to Fintek for providing hardware and spec sheets.
+ * This driver is based upon the nuvoton, ite and ene drivers for
+ * similar hardware.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+#include <linux/spinlock.h>
+#include <linux/ioctl.h>
+
+/* platform driver name to register */
+#define FINTEK_DRIVER_NAME	"fintek-cir"
+#define FINTEK_DESCRIPTION	"Fintek LPC SuperIO Consumer IR Transceiver"
+#define VENDOR_ID_FINTEK	0x1934
+
+
+/* debugging module parameter */
+static int debug;
+
+#define fit_pr(level, text, ...) \
+	printk(level KBUILD_MODNAME ": " text, ## __VA_ARGS__)
+
+#define fit_dbg(text, ...) \
+	if (debug) \
+		printk(KERN_DEBUG \
+			KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__)
+
+#define fit_dbg_verbose(text, ...) \
+	if (debug > 1) \
+		printk(KERN_DEBUG \
+			KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__)
+
+#define fit_dbg_wake(text, ...) \
+	if (debug > 2) \
+		printk(KERN_DEBUG \
+			KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__)
+
+
+#define TX_BUF_LEN 256
+#define RX_BUF_LEN 32
+
+struct fintek_dev {
+	struct pnp_dev *pdev;
+	struct rc_dev *rdev;
+
+	spinlock_t fintek_lock;
+
+	/* for rx */
+	u8 buf[RX_BUF_LEN];
+	unsigned int pkts;
+
+	struct {
+		spinlock_t lock;
+		u8 buf[TX_BUF_LEN];
+		unsigned int buf_count;
+		unsigned int cur_buf_num;
+		wait_queue_head_t queue;
+	} tx;
+
+	/* Config register index/data port pair */
+	u8 cr_ip;
+	u8 cr_dp;
+
+	/* hardware I/O settings */
+	unsigned long cir_addr;
+	int cir_irq;
+	int cir_port_len;
+
+	/* hardware id */
+	u8 chip_major;
+	u8 chip_minor;
+	u16 chip_vendor;
+
+	/* hardware features */
+	bool hw_learning_capable;
+	bool hw_tx_capable;
+
+	/* rx settings */
+	bool learning_enabled;
+	bool carrier_detect_enabled;
+
+	enum {
+		CMD_HEADER = 0,
+		SUBCMD,
+		CMD_DATA,
+		PARSE_IRDATA,
+	} parser_state;
+
+	u8 cmd, rem;
+
+	/* carrier period = 1 / frequency */
+	u32 carrier;
+};
+
+/* buffer packet constants, largely identical to mceusb.c */
+#define BUF_PULSE_BIT		0x80
+#define BUF_LEN_MASK		0x1f
+#define BUF_SAMPLE_MASK		0x7f
+
+#define BUF_COMMAND_HEADER	0x9f
+#define BUF_COMMAND_MASK	0xe0
+#define BUF_COMMAND_NULL	0x00
+#define BUF_HW_CMD_HEADER	0xff
+#define BUF_CMD_G_REVISION	0x0b
+#define BUF_CMD_S_CARRIER	0x06
+#define BUF_CMD_S_TIMEOUT	0x0c
+#define BUF_CMD_SIG_END		0x01
+#define BUF_CMD_S_TXMASK	0x08
+#define BUF_CMD_S_RXSENSOR	0x14
+#define BUF_RSP_PULSE_COUNT	0x15
+
+#define CIR_SAMPLE_PERIOD	50
+
+/*
+ * Configuration Register:
+ *  Index Port
+ *  Data Port
+ */
+#define CR_INDEX_PORT		0x2e
+#define CR_DATA_PORT		0x2f
+
+/* Possible alternate values, depends on how the chip is wired */
+#define CR_INDEX_PORT2		0x4e
+#define CR_DATA_PORT2		0x4f
+
+/*
+ * GCR_CONFIG_PORT_SEL bit 4 specifies which Index Port value is
+ * active. 1 = 0x4e, 0 = 0x2e
+ */
+#define PORT_SEL_PORT_4E_EN	0x10
+
+/* Extended Function Mode enable/disable magic values */
+#define CONFIG_REG_ENABLE	0x87
+#define CONFIG_REG_DISABLE	0xaa
+
+/* Chip IDs found in CR_CHIP_ID_{HI,LO} */
+#define CHIP_ID_HIGH_F71809U	0x04
+#define CHIP_ID_LOW_F71809U	0x08
+
+/*
+ * Global control regs we need to care about:
+ *      Global Control                  def.
+ *      Register name           addr    val. */
+#define GCR_SOFTWARE_RESET	0x02 /* 0x00 */
+#define GCR_LOGICAL_DEV_NO	0x07 /* 0x00 */
+#define GCR_CHIP_ID_HI		0x20 /* 0x04 */
+#define GCR_CHIP_ID_LO		0x21 /* 0x08 */
+#define GCR_VENDOR_ID_HI	0x23 /* 0x19 */
+#define GCR_VENDOR_ID_LO	0x24 /* 0x34 */
+#define GCR_CONFIG_PORT_SEL	0x25 /* 0x01 */
+#define GCR_KBMOUSE_WAKEUP	0x27
+
+#define LOGICAL_DEV_DISABLE	0x00
+#define LOGICAL_DEV_ENABLE	0x01
+
+/* Logical device number of the CIR function */
+#define LOGICAL_DEV_CIR		0x05
+
+/* CIR Logical Device (LDN 0x08) config registers */
+#define CIR_CR_COMMAND_INDEX	0x04
+#define CIR_CR_IRCS		0x05 /* Before host writes command to IR, host
+					must set to 1. When host finshes write
+					command to IR, host must clear to 0. */
+#define CIR_CR_COMMAND_DATA	0x06 /* Host read or write comand data */
+#define CIR_CR_CLASS		0x07 /* 0xff = rx-only, 0x66 = rx + 2 tx,
+					0x33 = rx + 1 tx */
+#define CIR_CR_DEV_EN		0x30 /* bit0 = 1 enables CIR */
+#define CIR_CR_BASE_ADDR_HI	0x60 /* MSB of CIR IO base addr */
+#define CIR_CR_BASE_ADDR_LO	0x61 /* LSB of CIR IO base addr */
+#define CIR_CR_IRQ_SEL		0x70 /* bits3-0 store CIR IRQ */
+#define CIR_CR_PSOUT_STATUS	0xf1
+#define CIR_CR_WAKE_KEY3_ADDR	0xf8
+#define CIR_CR_WAKE_KEY3_CODE	0xf9
+#define CIR_CR_WAKE_KEY3_DC	0xfa
+#define CIR_CR_WAKE_CONTROL	0xfb
+#define CIR_CR_WAKE_KEY12_ADDR	0xfc
+#define CIR_CR_WAKE_KEY4_ADDR	0xfd
+#define CIR_CR_WAKE_KEY5_ADDR	0xfe
+
+#define CLASS_RX_ONLY		0xff
+#define CLASS_RX_2TX		0x66
+#define CLASS_RX_1TX		0x33
+
+/* CIR device registers */
+#define CIR_STATUS		0x00
+#define CIR_RX_DATA		0x01
+#define CIR_TX_CONTROL		0x02
+#define CIR_TX_DATA		0x03
+#define CIR_CONTROL		0x04
+
+/* Bits to enable CIR wake */
+#define LOGICAL_DEV_ACPI	0x01
+#define LDEV_ACPI_WAKE_EN_REG	0xe8
+#define ACPI_WAKE_EN_CIR_BIT	0x04
+
+#define LDEV_ACPI_PME_EN_REG	0xf0
+#define LDEV_ACPI_PME_CLR_REG	0xf1
+#define ACPI_PME_CIR_BIT	0x02
+
+#define LDEV_ACPI_STATE_REG	0xf4
+#define ACPI_STATE_CIR_BIT	0x20
+
+/*
+ * CIR status register (0x00):
+ *   7 - CIR_IRQ_EN (1 = enable CIR IRQ, 0 = disable)
+ *   3 - TX_FINISH (1 when TX finished, write 1 to clear)
+ *   2 - TX_UNDERRUN (1 on TX underrun, write 1 to clear)
+ *   1 - RX_TIMEOUT (1 on RX timeout, write 1 to clear)
+ *   0 - RX_RECEIVE (1 on RX receive, write 1 to clear)
+ */
+#define CIR_STATUS_IRQ_EN	0x80
+#define CIR_STATUS_TX_FINISH	0x08
+#define CIR_STATUS_TX_UNDERRUN	0x04
+#define CIR_STATUS_RX_TIMEOUT	0x02
+#define CIR_STATUS_RX_RECEIVE	0x01
+#define CIR_STATUS_IRQ_MASK	0x0f
+
+/*
+ * CIR TX control register (0x02):
+ *   7 - TX_START (1 to indicate TX start, auto-cleared when done)
+ *   6 - TX_END (1 to indicate TX data written to TX fifo)
+ */
+#define CIR_TX_CONTROL_TX_START	0x80
+#define CIR_TX_CONTROL_TX_END	0x40
+

drivers/media/rc/keymaps/rc-lme2510.c

@@ -14,81 +14,81 @@
 
 static struct rc_map_table lme2510_rc[] = {
 	/* Type 1 - 26 buttons */
-	{ 0xef12ba45, KEY_0 },
-	{ 0xef12a05f, KEY_1 },
-	{ 0xef12af50, KEY_2 },
-	{ 0xef12a25d, KEY_3 },
-	{ 0xef12be41, KEY_4 },
-	{ 0xef12f50a, KEY_5 },
-	{ 0xef12bd42, KEY_6 },
-	{ 0xef12b847, KEY_7 },
-	{ 0xef12b649, KEY_8 },
-	{ 0xef12fa05, KEY_9 },
-	{ 0xef12bc43, KEY_POWER },
-	{ 0xef12b946, KEY_SUBTITLE },
-	{ 0xef12f906, KEY_PAUSE },
-	{ 0xef12fc03, KEY_MEDIA_REPEAT},
-	{ 0xef12fd02, KEY_PAUSE },
-	{ 0xef12a15e, KEY_VOLUMEUP },
-	{ 0xef12a35c, KEY_VOLUMEDOWN },
-	{ 0xef12f609, KEY_CHANNELUP },
-	{ 0xef12e51a, KEY_CHANNELDOWN },
-	{ 0xef12e11e, KEY_PLAY },
-	{ 0xef12e41b, KEY_ZOOM },
-	{ 0xef12a659, KEY_MUTE },
-	{ 0xef12a55a, KEY_TV },
-	{ 0xef12e718, KEY_RECORD },
-	{ 0xef12f807, KEY_EPG },
-	{ 0xef12fe01, KEY_STOP },
+	{ 0x10ed45, KEY_0 },
+	{ 0x10ed5f, KEY_1 },
+	{ 0x10ed50, KEY_2 },
+	{ 0x10ed5d, KEY_3 },
+	{ 0x10ed41, KEY_4 },
+	{ 0x10ed0a, KEY_5 },
+	{ 0x10ed42, KEY_6 },
+	{ 0x10ed47, KEY_7 },
+	{ 0x10ed49, KEY_8 },
+	{ 0x10ed05, KEY_9 },
+	{ 0x10ed43, KEY_POWER },
+	{ 0x10ed46, KEY_SUBTITLE },
+	{ 0x10ed06, KEY_PAUSE },
+	{ 0x10ed03, KEY_MEDIA_REPEAT},
+	{ 0x10ed02, KEY_PAUSE },
+	{ 0x10ed5e, KEY_VOLUMEUP },
+	{ 0x10ed5c, KEY_VOLUMEDOWN },
+	{ 0x10ed09, KEY_CHANNELUP },
+	{ 0x10ed1a, KEY_CHANNELDOWN },
+	{ 0x10ed1e, KEY_PLAY },
+	{ 0x10ed1b, KEY_ZOOM },
+	{ 0x10ed59, KEY_MUTE },
+	{ 0x10ed5a, KEY_TV },
+	{ 0x10ed18, KEY_RECORD },
+	{ 0x10ed07, KEY_EPG },
+	{ 0x10ed01, KEY_STOP },
 	/* Type 2 - 20 buttons */
-	{ 0xff40ea15, KEY_0 },
-	{ 0xff40f708, KEY_1 },
-	{ 0xff40f609, KEY_2 },
-	{ 0xff40f50a, KEY_3 },
-	{ 0xff40f30c, KEY_4 },
-	{ 0xff40f20d, KEY_5 },
-	{ 0xff40f10e, KEY_6 },
-	{ 0xff40ef10, KEY_7 },
-	{ 0xff40ee11, KEY_8 },
-	{ 0xff40ed12, KEY_9 },
-	{ 0xff40ff00, KEY_POWER },
-	{ 0xff40fb04, KEY_MEDIA_REPEAT}, /* Recall */
-	{ 0xff40e51a, KEY_PAUSE }, /* Timeshift */
-	{ 0xff40fd02, KEY_VOLUMEUP }, /* 2 x -/+ Keys not marked */
-	{ 0xff40f906, KEY_VOLUMEDOWN }, /* Volume defined as right hand*/
-	{ 0xff40fe01, KEY_CHANNELUP },
-	{ 0xff40fa05, KEY_CHANNELDOWN },
-	{ 0xff40eb14, KEY_ZOOM },
-	{ 0xff40e718, KEY_RECORD },
-	{ 0xff40e916, KEY_STOP },
+	{ 0xbf15, KEY_0 },
+	{ 0xbf08, KEY_1 },
+	{ 0xbf09, KEY_2 },
+	{ 0xbf0a, KEY_3 },
+	{ 0xbf0c, KEY_4 },
+	{ 0xbf0d, KEY_5 },
+	{ 0xbf0e, KEY_6 },
+	{ 0xbf10, KEY_7 },
+	{ 0xbf11, KEY_8 },
+	{ 0xbf12, KEY_9 },
+	{ 0xbf00, KEY_POWER },
+	{ 0xbf04, KEY_MEDIA_REPEAT}, /* Recall */
+	{ 0xbf1a, KEY_PAUSE }, /* Timeshift */
+	{ 0xbf02, KEY_VOLUMEUP }, /* 2 x -/+ Keys not marked */
+	{ 0xbf06, KEY_VOLUMEDOWN }, /* Volume defined as right hand*/
+	{ 0xbf01, KEY_CHANNELUP },
+	{ 0xbf05, KEY_CHANNELDOWN },
+	{ 0xbf14, KEY_ZOOM },
+	{ 0xbf18, KEY_RECORD },
+	{ 0xbf16, KEY_STOP },
 	/* Type 3 - 20 buttons */
-	{ 0xff00e31c, KEY_0 },
-	{ 0xff00f807, KEY_1 },
-	{ 0xff00ea15, KEY_2 },
-	{ 0xff00f609, KEY_3 },
-	{ 0xff00e916, KEY_4 },
-	{ 0xff00e619, KEY_5 },
-	{ 0xff00f20d, KEY_6 },
-	{ 0xff00f30c, KEY_7 },
-	{ 0xff00e718, KEY_8 },
-	{ 0xff00a15e, KEY_9 },
-	{ 0xff00ba45, KEY_POWER },
-	{ 0xff00bb44, KEY_MEDIA_REPEAT}, /* Recall */
-	{ 0xff00b54a, KEY_PAUSE }, /* Timeshift */
-	{ 0xff00b847, KEY_VOLUMEUP }, /* 2 x -/+ Keys not marked */
-	{ 0xff00bc43, KEY_VOLUMEDOWN }, /* Volume defined as right hand*/
-	{ 0xff00b946, KEY_CHANNELUP },
-	{ 0xff00bf40, KEY_CHANNELDOWN },
-	{ 0xff00f708, KEY_ZOOM },
-	{ 0xff00bd42, KEY_RECORD },
-	{ 0xff00a55a, KEY_STOP },
+	{ 0x1c, KEY_0 },
+	{ 0x07, KEY_1 },
+	{ 0x15, KEY_2 },
+	{ 0x09, KEY_3 },
+	{ 0x16, KEY_4 },
+	{ 0x19, KEY_5 },
+	{ 0x0d, KEY_6 },
+	{ 0x0c, KEY_7 },
+	{ 0x18, KEY_8 },
+	{ 0x5e, KEY_9 },
+	{ 0x45, KEY_POWER },
+	{ 0x44, KEY_MEDIA_REPEAT}, /* Recall */
+	{ 0x4a, KEY_PAUSE }, /* Timeshift */
+	{ 0x47, KEY_VOLUMEUP }, /* 2 x -/+ Keys not marked */
+	{ 0x43, KEY_VOLUMEDOWN }, /* Volume defined as right hand*/
+	{ 0x46, KEY_CHANNELUP },
+	{ 0x40, KEY_CHANNELDOWN },
+	{ 0x08, KEY_ZOOM },
+	{ 0x42, KEY_RECORD },
+	{ 0x5a, KEY_STOP },
 };
 
 static struct rc_map_list lme2510_map = {
 	.map = {
 		.scan    = lme2510_rc,
 		.size    = ARRAY_SIZE(lme2510_rc),
-		.rc_type = RC_TYPE_UNKNOWN,
+		.rc_type = RC_TYPE_NEC,
 		.name    = RC_MAP_LME2510,
 	}
 };

drivers/media/video/Kconfig

@@ -687,7 +687,7 @@ config VIDEO_HEXIUM_GEMINI
 
 config VIDEO_TIMBERDALE
 	tristate "Support for timberdale Video In/LogiWIN"
-	depends on VIDEO_V4L2 && I2C
+	depends on VIDEO_V4L2 && I2C && DMADEVICES
 	select DMA_ENGINE
 	select TIMB_DMA
 	select VIDEO_ADV7180
@@ -757,6 +757,8 @@ config VIDEO_NOON010PC30
 	---help---
 	  This driver supports NOON010PC30 CIF camera from Siliconfile
 
+source "drivers/media/video/m5mols/Kconfig"
+
 config VIDEO_OMAP3
 	tristate "OMAP 3 Camera support (EXPERIMENTAL)"
 	select OMAP_IOMMU
@@ -952,7 +954,7 @@ config  VIDEO_SAMSUNG_S5P_FIMC
 
 config VIDEO_S5P_MIPI_CSIS
 	tristate "Samsung S5P and EXYNOS4 MIPI CSI receiver driver"
-	depends on VIDEO_V4L2 && PM_RUNTIME && VIDEO_V4L2_SUBDEV_API
+	depends on VIDEO_V4L2 && PM_RUNTIME && PLAT_S5P && VIDEO_V4L2_SUBDEV_API
 	---help---
 	  This is a v4l2 driver for Samsung S5P/EXYNOS4 MIPI-CSI receiver.
 

drivers/media/video/Makefile

@@ -69,6 +69,7 @@ obj-$(CONFIG_VIDEO_MT9V011) += mt9v011.o
 obj-$(CONFIG_VIDEO_MT9V032) += mt9v032.o
 obj-$(CONFIG_VIDEO_SR030PC30)	+= sr030pc30.o
 obj-$(CONFIG_VIDEO_NOON010PC30)	+= noon010pc30.o
+obj-$(CONFIG_VIDEO_M5MOLS)	+= m5mols/
 
 obj-$(CONFIG_SOC_CAMERA_IMX074)		+= imx074.o
 obj-$(CONFIG_SOC_CAMERA_MT9M001)	+= mt9m001.o

drivers/media/video/cpia2/cpia2_v4l.c

@@ -438,7 +438,7 @@ static int cpia2_querycap(struct file *file, void *fh, struct v4l2_capability *v
 		strcat(vc->card, " (676/");
 		break;
 	default:
-		strcat(vc->card, " (???/");
+		strcat(vc->card, " (XXX/");
 		break;
 	}
 	switch (cam->params.version.sensor_flags) {
@@ -458,7 +458,7 @@ static int cpia2_querycap(struct file *file, void *fh, struct v4l2_capability *v
 		strcat(vc->card, "500)");
 		break;
 	default:
-		strcat(vc->card, "???)");
+		strcat(vc->card, "XXX)");
 		break;
 	}
 

drivers/media/video/gspca/kinect.c

@@ -34,7 +34,7 @@ MODULE_AUTHOR("Antonio Ospite <ospite@studenti.unina.it>");
 MODULE_DESCRIPTION("GSPCA/Kinect Sensor Device USB Camera Driver");
 MODULE_LICENSE("GPL");
 
-#ifdef DEBUG
+#ifdef GSPCA_DEBUG
 int gspca_debug = D_ERR | D_PROBE | D_CONF | D_STREAM | D_FRAM | D_PACK |
 	D_USBI | D_USBO | D_V4L2;
 #endif

drivers/media/video/m5mols/Kconfig

@@ -0,0 +1,5 @@
+config VIDEO_M5MOLS
+	tristate "Fujitsu M-5MOLS 8MP sensor support"
+	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	---help---
+	  This driver supports Fujitsu M-5MOLS camera sensor with ISP

drivers/media/video/m5mols/Makefile

@@ -0,0 +1,3 @@
+m5mols-objs	:= m5mols_core.o m5mols_controls.o m5mols_capture.o
+
+obj-$(CONFIG_VIDEO_M5MOLS)		+= m5mols.o

drivers/media/video/m5mols/m5mols.h

@@ -0,0 +1,296 @@
+/*
+ * Header for M-5MOLS 8M Pixel camera sensor with ISP
+ *
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ * Author: HeungJun Kim, riverful.kim@samsung.com
+ *
+ * Copyright (C) 2009 Samsung Electronics Co., Ltd.
+ * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef M5MOLS_H
+#define M5MOLS_H
+
+#include <media/v4l2-subdev.h>
+#include "m5mols_reg.h"
+
+extern int m5mols_debug;
+
+#define to_m5mols(__sd)	container_of(__sd, struct m5mols_info, sd)
+
+#define to_sd(__ctrl) \
+	(&container_of(__ctrl->handler, struct m5mols_info, handle)->sd)
+
+enum m5mols_restype {
+	M5MOLS_RESTYPE_MONITOR,
+	M5MOLS_RESTYPE_CAPTURE,
+	M5MOLS_RESTYPE_MAX,
+};
+
+/**
+ * struct m5mols_resolution - structure for the resolution
+ * @type: resolution type according to the pixel code
+ * @width: width of the resolution
+ * @height: height of the resolution
+ * @reg: resolution preset register value
+ */
+struct m5mols_resolution {
+	u8 reg;
+	enum m5mols_restype type;
+	u16 width;
+	u16 height;
+};
+
+/**
+ * struct m5mols_exif - structure for the EXIF information of M-5MOLS
+ * @exposure_time: exposure time register value
+ * @shutter_speed: speed of the shutter register value
+ * @aperture: aperture register value
+ * @exposure_bias: it calls also EV bias
+ * @iso_speed: ISO register value
+ * @flash: status register value of the flash
+ * @sdr: status register value of the Subject Distance Range
+ * @qval: not written exact meaning in document
+ */
+struct m5mols_exif {
+	u32 exposure_time;
+	u32 shutter_speed;
+	u32 aperture;
+	u32 brightness;
+	u32 exposure_bias;
+	u16 iso_speed;
+	u16 flash;
+	u16 sdr;
+	u16 qval;
+};
+
+/**
+ * struct m5mols_capture - Structure for the capture capability
+ * @exif: EXIF information
+ * @main: size in bytes of the main image
+ * @thumb: size in bytes of the thumb image, if it was accompanied
+ * @total: total size in bytes of the produced image
+ */
+struct m5mols_capture {
+	struct m5mols_exif exif;
+	u32 main;
+	u32 thumb;
+	u32 total;
+};
+
+/**
+ * struct m5mols_scenemode - structure for the scenemode capability
+ * @metering: metering light register value
+ * @ev_bias: EV bias register value
+ * @wb_mode: mode which means the WhiteBalance is Auto or Manual
+ * @wb_preset: whitebalance preset register value in the Manual mode
+ * @chroma_en: register value whether the Chroma capability is enabled or not
+ * @chroma_lvl: chroma's level register value
+ * @edge_en: register value Whether the Edge capability is enabled or not
+ * @edge_lvl: edge's level register value
+ * @af_range: Auto Focus's range
+ * @fd_mode: Face Detection mode
+ * @mcc: Multi-axis Color Conversion which means emotion color
+ * @light: status of the Light
+ * @flash: status of the Flash
+ * @tone: Tone color which means Contrast
+ * @iso: ISO register value
+ * @capt_mode: Mode of the Image Stabilization while the camera capturing
+ * @wdr: Wide Dynamic Range register value
+ *
+ * The each value according to each scenemode is recommended in the documents.
+ */
+struct m5mols_scenemode {
+	u32 metering;
+	u32 ev_bias;
+	u32 wb_mode;
+	u32 wb_preset;
+	u32 chroma_en;
+	u32 chroma_lvl;
+	u32 edge_en;
+	u32 edge_lvl;
+	u32 af_range;
+	u32 fd_mode;
+	u32 mcc;
+	u32 light;
+	u32 flash;
+	u32 tone;
+	u32 iso;
+	u32 capt_mode;
+	u32 wdr;
+};
+
+/**
+ * struct m5mols_version - firmware version information
+ * @customer:	customer information
+ * @project:	version of project information according to customer
+ * @fw:		firmware revision
+ * @hw:		hardware revision
+ * @param:	version of the parameter
+ * @awb:	Auto WhiteBalance algorithm version
+ * @str:	information about manufacturer and packaging vendor
+ * @af:		Auto Focus version
+ *
+ * The register offset starts the customer version at 0x0, and it ends
+ * the awb version at 0x09. The customer, project information occupies 1 bytes
+ * each. And also the fw, hw, param, awb each requires 2 bytes. The str is
+ * unique string associated with firmware's version. It includes information
+ * about manufacturer and the vendor of the sensor's packaging. The least
+ * significant 2 bytes of the string indicate packaging manufacturer.
+ */
+#define VERSION_STRING_SIZE	22
+struct m5mols_version {
+	u8	customer;
+	u8	project;
+	u16	fw;
+	u16	hw;
+	u16	param;
+	u16	awb;
+	u8	str[VERSION_STRING_SIZE];
+	u8	af;
+};
+#define VERSION_SIZE sizeof(struct m5mols_version)
+
+/**
+ * struct m5mols_info - M-5MOLS driver data structure
+ * @pdata: platform data
+ * @sd: v4l-subdev instance
+ * @pad: media pad
+ * @ffmt: current fmt according to resolution type
+ * @res_type: current resolution type
+ * @code: current code
+ * @irq_waitq: waitqueue for the capture
+ * @work_irq: workqueue for the IRQ
+ * @flags: state variable for the interrupt handler
+ * @handle: control handler
+ * @autoexposure: Auto Exposure control
+ * @exposure: Exposure control
+ * @autowb: Auto White Balance control
+ * @colorfx: Color effect control
+ * @saturation:	Saturation control
+ * @zoom: Zoom control
+ * @ver: information of the version
+ * @cap: the capture mode attributes
+ * @power: current sensor's power status
+ * @ctrl_sync: true means all controls of the sensor are initialized
+ * @int_capture: true means the capture interrupt is issued once
+ * @lock_ae: true means the Auto Exposure is locked
+ * @lock_awb: true means the Aut WhiteBalance is locked
+ * @resolution:	register value for current resolution
+ * @interrupt: register value for current interrupt status
+ * @mode: register value for current operation mode
+ * @mode_save: register value for current operation mode for saving
+ * @set_power: optional power callback to the board code
+ */
+struct m5mols_info {
+	const struct m5mols_platform_data *pdata;
+	struct v4l2_subdev sd;
+	struct media_pad pad;
+	struct v4l2_mbus_framefmt ffmt[M5MOLS_RESTYPE_MAX];
+	int res_type;
+	enum v4l2_mbus_pixelcode code;
+	wait_queue_head_t irq_waitq;
+	struct work_struct work_irq;
+	unsigned long flags;
+
+	struct v4l2_ctrl_handler handle;
+	/* Autoexposure/exposure control cluster */
+	struct {
+		struct v4l2_ctrl *autoexposure;
+		struct v4l2_ctrl *exposure;
+	};
+	struct v4l2_ctrl *autowb;
+	struct v4l2_ctrl *colorfx;
+	struct v4l2_ctrl *saturation;
+	struct v4l2_ctrl *zoom;
+
+	struct m5mols_version ver;
+	struct m5mols_capture cap;
+	bool power;
+	bool ctrl_sync;
+	bool lock_ae;
+	bool lock_awb;
+	u8 resolution;
+	u32 interrupt;
+	u32 mode;
+	u32 mode_save;
+	int (*set_power)(struct device *dev, int on);
+};
+
+#define ST_CAPT_IRQ 0
+
+#define is_powered(__info) (__info->power)
+#define is_ctrl_synced(__info) (__info->ctrl_sync)
+#define is_available_af(__info)	(__info->ver.af)
+#define is_code(__code, __type) (__code == m5mols_default_ffmt[__type].code)
+#define is_manufacturer(__info, __manufacturer)	\
+				(__info->ver.str[0] == __manufacturer[0] && \
+				 __info->ver.str[1] == __manufacturer[1])
+/*
+ * I2C operation of the M-5MOLS
+ *
+ * The I2C read operation of the M-5MOLS requires 2 messages. The first
+ * message sends the information about the command, command category, and total
+ * message size. The second message is used to retrieve the data specifed in
+ * the first message
+ *
+ *   1st message                                2nd message
+ *   +-------+---+----------+-----+-------+     +------+------+------+------+
+ *   | size1 | R | category | cmd | size2 |     | d[0] | d[1] | d[2] | d[3] |
+ *   +-------+---+----------+-----+-------+     +------+------+------+------+
+ *   - size1: message data size(5 in this case)
+ *   - size2: desired buffer size of the 2nd message
+ *   - d[0..3]: according to size2
+ *
+ * The I2C write operation needs just one message. The message includes
+ * category, command, total size, and desired data.
+ *
+ *   1st message
+ *   +-------+---+----------+-----+------+------+------+------+
+ *   | size1 | W | category | cmd | d[0] | d[1] | d[2] | d[3] |
+ *   +-------+---+----------+-----+------+------+------+------+
+ *   - d[0..3]: according to size1
+ */
+int m5mols_read(struct v4l2_subdev *sd, u32 reg_comb, u32 *val);
+int m5mols_write(struct v4l2_subdev *sd, u32 reg_comb, u32 val);
+int m5mols_busy(struct v4l2_subdev *sd, u8 category, u8 cmd, u32 value);
+
+/*
+ * Mode operation of the M-5MOLS
+ *
+ * Changing the mode of the M-5MOLS is needed right executing order.
+ * There are three modes(PARAMETER, MONITOR, CAPTURE) which can be changed
+ * by user. There are various categories associated with each mode.
+ *
+ * +============================================================+
+ * | mode	| category					|
+ * +============================================================+
+ * | FLASH	| FLASH(only after Stand-by or Power-on)	|
+ * | SYSTEM	| SYSTEM(only after sensor arm-booting)		|
+ * | PARAMETER	| PARAMETER					|
+ * | MONITOR	| MONITOR(preview), Auto Focus, Face Detection	|
+ * | CAPTURE	| Single CAPTURE, Preview(recording)		|
+ * +============================================================+
+ *
+ * The available executing order between each modes are as follows:
+ *   PARAMETER <---> MONITOR <---> CAPTURE
+ */
+int m5mols_mode(struct m5mols_info *info, u32 mode);
+
+int m5mols_enable_interrupt(struct v4l2_subdev *sd, u32 reg);
+int m5mols_sync_controls(struct m5mols_info *info);
+int m5mols_start_capture(struct m5mols_info *info);
+int m5mols_do_scenemode(struct m5mols_info *info, u32 mode);
+int m5mols_lock_3a(struct m5mols_info *info, bool lock);
+int m5mols_set_ctrl(struct v4l2_ctrl *ctrl);
+
+/* The firmware function */
+int m5mols_update_fw(struct v4l2_subdev *sd,
+		     int (*set_power)(struct m5mols_info *, bool));
+
+#endif	/* M5MOLS_H */

drivers/media/video/m5mols/m5mols_capture.c

@@ -0,0 +1,191 @@
+/*
+ * The Capture code for Fujitsu M-5MOLS ISP
+ *
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ * Author: HeungJun Kim, riverful.kim@samsung.com
+ *
+ * Copyright (C) 2009 Samsung Electronics Co., Ltd.
+ * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/version.h>
+#include <linux/gpio.h>
+#include <linux/regulator/consumer.h>
+#include <linux/videodev2.h>
+#include <linux/version.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-subdev.h>
+#include <media/m5mols.h>
+
+#include "m5mols.h"
+#include "m5mols_reg.h"
+
+static int m5mols_capture_error_handler(struct m5mols_info *info,
+					int timeout)
+{
+	int ret;
+
+	/* Disable all interrupts and clear relevant interrupt staus bits */
+	ret = m5mols_write(&info->sd, SYSTEM_INT_ENABLE,
+			   info->interrupt & ~(REG_INT_CAPTURE));
+	if (ret)
+		return ret;
+
+	if (timeout == 0)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+/**
+ * m5mols_read_rational - I2C read of a rational number
+ *
+ * Read numerator and denominator from registers @addr_num and @addr_den
+ * respectively and return the division result in @val.
+ */
+static int m5mols_read_rational(struct v4l2_subdev *sd, u32 addr_num,
+				u32 addr_den, u32 *val)
+{
+	u32 num, den;
+
+	int ret = m5mols_read(sd, addr_num, &num);
+	if (!ret)
+		ret = m5mols_read(sd, addr_den, &den);
+	if (ret)
+		return ret;
+	*val = den == 0 ? 0 : num / den;
+	return ret;
+}
+
+/**
+ * m5mols_capture_info - Gather captured image information
+ *
+ * For now it gathers only EXIF information and file size.
+ */
+static int m5mols_capture_info(struct m5mols_info *info)
+{
+	struct m5mols_exif *exif = &info->cap.exif;
+	struct v4l2_subdev *sd = &info->sd;
+	int ret;
+
+	ret = m5mols_read_rational(sd, EXIF_INFO_EXPTIME_NU,
+				   EXIF_INFO_EXPTIME_DE, &exif->exposure_time);
+	if (ret)
+		return ret;
+	ret = m5mols_read_rational(sd, EXIF_INFO_TV_NU, EXIF_INFO_TV_DE,
+				   &exif->shutter_speed);
+	if (ret)
+		return ret;
+	ret = m5mols_read_rational(sd, EXIF_INFO_AV_NU, EXIF_INFO_AV_DE,
+				   &exif->aperture);
+	if (ret)
+		return ret;
+	ret = m5mols_read_rational(sd, EXIF_INFO_BV_NU, EXIF_INFO_BV_DE,
+				   &exif->brightness);
+	if (ret)
+		return ret;
+	ret = m5mols_read_rational(sd, EXIF_INFO_EBV_NU, EXIF_INFO_EBV_DE,
+				   &exif->exposure_bias);
+	if (ret)
+		return ret;
+
+	ret = m5mols_read(sd, EXIF_INFO_ISO, (u32 *)&exif->iso_speed);
+	if (!ret)
+		ret = m5mols_read(sd, EXIF_INFO_FLASH, (u32 *)&exif->flash);
+	if (!ret)
+		ret = m5mols_read(sd, EXIF_INFO_SDR, (u32 *)&exif->sdr);
+	if (!ret)
+		ret = m5mols_read(sd, EXIF_INFO_QVAL, (u32 *)&exif->qval);
+	if (ret)
+		return ret;
+
+	if (!ret)
+		ret = m5mols_read(sd, CAPC_IMAGE_SIZE, &info->cap.main);
+	if (!ret)
+		ret = m5mols_read(sd, CAPC_THUMB_SIZE, &info->cap.thumb);
+	if (!ret)
+		info->cap.total = info->cap.main + info->cap.thumb;
+
+	return ret;
+}
+
+int m5mols_start_capture(struct m5mols_info *info)
+{
+	struct v4l2_subdev *sd = &info->sd;
+	u32 resolution = info->resolution;
+	int timeout;
+	int ret;
+
+	/*
+	 * Preparing capture. Setting control & interrupt before entering
+	 * capture mode
+	 *
+	 * 1) change to MONITOR mode for operating control & interrupt
+	 * 2) set controls (considering v4l2_control value & lock 3A)
+	 * 3) set interrupt
+	 * 4) change to CAPTURE mode
+	 */
+	ret = m5mols_mode(info, REG_MONITOR);
+	if (!ret)
+		ret = m5mols_sync_controls(info);
+	if (!ret)
+		ret = m5mols_lock_3a(info, true);
+	if (!ret)
+		ret = m5mols_enable_interrupt(sd, REG_INT_CAPTURE);
+	if (!ret)
+		ret = m5mols_mode(info, REG_CAPTURE);
+	if (!ret) {
+		/* Wait for capture interrupt, after changing capture mode */
+		timeout = wait_event_interruptible_timeout(info->irq_waitq,
+					   test_bit(ST_CAPT_IRQ, &info->flags),
+					   msecs_to_jiffies(2000));
+		if (test_and_clear_bit(ST_CAPT_IRQ, &info->flags))
+			ret = m5mols_capture_error_handler(info, timeout);
+	}
+	if (!ret)
+		ret = m5mols_lock_3a(info, false);
+	if (ret)
+		return ret;
+	/*
+	 * Starting capture. Setting capture frame count and resolution and
+	 * the format(available format: JPEG, Bayer RAW, YUV).
+	 *
+	 * 1) select single or multi(enable to 25), format, size
+	 * 2) set interrupt
+	 * 3) start capture(for main image, now)
+	 * 4) get information
+	 * 5) notify file size to v4l2 device(e.g, to s5p-fimc v4l2 device)
+	 */
+	ret = m5mols_write(sd, CAPC_SEL_FRAME, 1);
+	if (!ret)
+		ret = m5mols_write(sd, CAPP_YUVOUT_MAIN, REG_JPEG);
+	if (!ret)
+		ret = m5mols_write(sd, CAPP_MAIN_IMAGE_SIZE, resolution);
+	if (!ret)
+		ret = m5mols_enable_interrupt(sd, REG_INT_CAPTURE);
+	if (!ret)
+		ret = m5mols_write(sd, CAPC_START, REG_CAP_START_MAIN);
+	if (!ret) {
+		/* Wait for the capture completion interrupt */
+		timeout = wait_event_interruptible_timeout(info->irq_waitq,
+					   test_bit(ST_CAPT_IRQ, &info->flags),
+					   msecs_to_jiffies(2000));
+		if (test_and_clear_bit(ST_CAPT_IRQ, &info->flags)) {
+			ret = m5mols_capture_info(info);
+			if (!ret)
+				v4l2_subdev_notify(sd, 0, &info->cap.total);
+		}
+	}
+
+	return m5mols_capture_error_handler(info, timeout);
+}

drivers/media/video/m5mols/m5mols_controls.c

@@ -0,0 +1,299 @@
+/*
+ * Controls for M-5MOLS 8M Pixel camera sensor with ISP
+ *
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ * Author: HeungJun Kim, riverful.kim@samsung.com
+ *
+ * Copyright (C) 2009 Samsung Electronics Co., Ltd.
+ * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-ctrls.h>
+
+#include "m5mols.h"
+#include "m5mols_reg.h"
+
+static struct m5mols_scenemode m5mols_default_scenemode[] = {
+	[REG_SCENE_NORMAL] = {
+		REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0,
+		REG_CHROMA_ON, 3, REG_EDGE_ON, 5,
+		REG_AF_NORMAL, REG_FD_OFF,
+		REG_MCC_NORMAL, REG_LIGHT_OFF, REG_FLASH_OFF,
+		5, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF,
+	},
+	[REG_SCENE_PORTRAIT] = {
+		REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0,
+		REG_CHROMA_ON, 3, REG_EDGE_ON, 4,
+		REG_AF_NORMAL, BIT_FD_EN | BIT_FD_DRAW_FACE_FRAME,
+		REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF,
+		6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF,
+	},
+	[REG_SCENE_LANDSCAPE] = {
+		REG_AE_ALL, REG_AE_INDEX_00, REG_AWB_AUTO, 0,
+		REG_CHROMA_ON, 4, REG_EDGE_ON, 6,
+		REG_AF_NORMAL, REG_FD_OFF,
+		REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF,
+		6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF,
+	},
+	[REG_SCENE_SPORTS] = {
+		REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0,
+		REG_CHROMA_ON, 3, REG_EDGE_ON, 5,
+		REG_AF_NORMAL, REG_FD_OFF,
+		REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF,
+		6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF,
+	},
+	[REG_SCENE_PARTY_INDOOR] = {
+		REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0,
+		REG_CHROMA_ON, 4, REG_EDGE_ON, 5,
+		REG_AF_NORMAL, REG_FD_OFF,
+		REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF,
+		6, REG_ISO_200, REG_CAP_NONE, REG_WDR_OFF,
+	},
+	[REG_SCENE_BEACH_SNOW] = {
+		REG_AE_CENTER, REG_AE_INDEX_10_POS, REG_AWB_AUTO, 0,
+		REG_CHROMA_ON, 4, REG_EDGE_ON, 5,
+		REG_AF_NORMAL, REG_FD_OFF,
+		REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF,
+		6, REG_ISO_50, REG_CAP_NONE, REG_WDR_OFF,
+	},
+	[REG_SCENE_SUNSET] = {
+		REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_PRESET,
+		REG_AWB_DAYLIGHT,
+		REG_CHROMA_ON, 3, REG_EDGE_ON, 5,
+		REG_AF_NORMAL, REG_FD_OFF,
+		REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF,
+		6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF,
+	},
+	[REG_SCENE_DAWN_DUSK] = {
+		REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_PRESET,
+		REG_AWB_FLUORESCENT_1,
+		REG_CHROMA_ON, 3, REG_EDGE_ON, 5,
+		REG_AF_NORMAL, REG_FD_OFF,
+		REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF,
+		6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF,
+	},
+	[REG_SCENE_FALL] = {
+		REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0,
+		REG_CHROMA_ON, 5, REG_EDGE_ON, 5,
+		REG_AF_NORMAL, REG_FD_OFF,
+		REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF,
+		6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF,
+	},
+	[REG_SCENE_NIGHT] = {
+		REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0,
+		REG_CHROMA_ON, 3, REG_EDGE_ON, 5,
+		REG_AF_NORMAL, REG_FD_OFF,
+		REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF,
+		6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF,
+	},
+	[REG_SCENE_AGAINST_LIGHT] = {
+		REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0,
+		REG_CHROMA_ON, 3, REG_EDGE_ON, 5,
+		REG_AF_NORMAL, REG_FD_OFF,
+		REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF,
+		6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF,
+	},
+	[REG_SCENE_FIRE] = {
+		REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0,
+		REG_CHROMA_ON, 3, REG_EDGE_ON, 5,
+		REG_AF_NORMAL, REG_FD_OFF,
+		REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF,
+		6, REG_ISO_50, REG_CAP_NONE, REG_WDR_OFF,
+	},
+	[REG_SCENE_TEXT] = {
+		REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0,
+		REG_CHROMA_ON, 3, REG_EDGE_ON, 7,
+		REG_AF_MACRO, REG_FD_OFF,
+		REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF,
+		6, REG_ISO_AUTO, REG_CAP_ANTI_SHAKE, REG_WDR_ON,
+	},
+	[REG_SCENE_CANDLE] = {
+		REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0,
+		REG_CHROMA_ON, 3, REG_EDGE_ON, 5,
+		REG_AF_NORMAL, REG_FD_OFF,
+		REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF,
+		6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF,
+	},
+};
+
+/**
+ * m5mols_do_scenemode() - Change current scenemode
+ * @mode:	Desired mode of the scenemode
+ *
+ * WARNING: The execution order is important. Do not change the order.
+ */
+int m5mols_do_scenemode(struct m5mols_info *info, u32 mode)
+{
+	struct v4l2_subdev *sd = &info->sd;
+	struct m5mols_scenemode scenemode = m5mols_default_scenemode[mode];
+	int ret;
+
+	if (mode > REG_SCENE_CANDLE)
+		return -EINVAL;
+
+	ret = m5mols_lock_3a(info, false);
+	if (!ret)
+		ret = m5mols_write(sd, AE_EV_PRESET_MONITOR, mode);
+	if (!ret)
+		ret = m5mols_write(sd, AE_EV_PRESET_CAPTURE, mode);
+	if (!ret)
+		ret = m5mols_write(sd, AE_MODE, scenemode.metering);
+	if (!ret)
+		ret = m5mols_write(sd, AE_INDEX, scenemode.ev_bias);
+	if (!ret)
+		ret = m5mols_write(sd, AWB_MODE, scenemode.wb_mode);
+	if (!ret)
+		ret = m5mols_write(sd, AWB_MANUAL, scenemode.wb_preset);
+	if (!ret)
+		ret = m5mols_write(sd, MON_CHROMA_EN, scenemode.chroma_en);
+	if (!ret)
+		ret = m5mols_write(sd, MON_CHROMA_LVL, scenemode.chroma_lvl);
+	if (!ret)
+		ret = m5mols_write(sd, MON_EDGE_EN, scenemode.edge_en);
+	if (!ret)
+		ret = m5mols_write(sd, MON_EDGE_LVL, scenemode.edge_lvl);
+	if (!ret && is_available_af(info))
+		ret = m5mols_write(sd, AF_MODE, scenemode.af_range);
+	if (!ret && is_available_af(info))
+		ret = m5mols_write(sd, FD_CTL, scenemode.fd_mode);
+	if (!ret)
+		ret = m5mols_write(sd, MON_TONE_CTL, scenemode.tone);
+	if (!ret)
+		ret = m5mols_write(sd, AE_ISO, scenemode.iso);
+	if (!ret)
+		ret = m5mols_mode(info, REG_CAPTURE);
+	if (!ret)
+		ret = m5mols_write(sd, CAPP_WDR_EN, scenemode.wdr);
+	if (!ret)
+		ret = m5mols_write(sd, CAPP_MCC_MODE, scenemode.mcc);
+	if (!ret)
+		ret = m5mols_write(sd, CAPP_LIGHT_CTRL, scenemode.light);
+	if (!ret)
+		ret = m5mols_write(sd, CAPP_FLASH_CTRL, scenemode.flash);
+	if (!ret)
+		ret = m5mols_write(sd, CAPC_MODE, scenemode.capt_mode);
+	if (!ret)
+		ret = m5mols_mode(info, REG_MONITOR);
+
+	return ret;
+}
+
+static int m5mols_lock_ae(struct m5mols_info *info, bool lock)
+{
+	int ret = 0;
+
+	if (info->lock_ae != lock)
+		ret = m5mols_write(&info->sd, AE_LOCK,
+				lock ? REG_AE_LOCK : REG_AE_UNLOCK);
+	if (!ret)
+		info->lock_ae = lock;
+
+	return ret;
+}
+
+static int m5mols_lock_awb(struct m5mols_info *info, bool lock)
+{
+	int ret = 0;
+
+	if (info->lock_awb != lock)
+		ret = m5mols_write(&info->sd, AWB_LOCK,
+				lock ? REG_AWB_LOCK : REG_AWB_UNLOCK);
+	if (!ret)
+		info->lock_awb = lock;
+
+	return ret;
+}
+
+/* m5mols_lock_3a() - Lock 3A(Auto Exposure, Auto Whitebalance, Auto Focus) */
+int m5mols_lock_3a(struct m5mols_info *info, bool lock)
+{
+	int ret;
+
+	ret = m5mols_lock_ae(info, lock);
+	if (!ret)
+		ret = m5mols_lock_awb(info, lock);
+	/* Don't need to handle unlocking AF */
+	if (!ret && is_available_af(info) && lock)
+		ret = m5mols_write(&info->sd, AF_EXECUTE, REG_AF_STOP);
+
+	return ret;
+}
+
+/* m5mols_set_ctrl() - The main s_ctrl function called by m5mols_set_ctrl() */
+int m5mols_set_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct v4l2_subdev *sd = to_sd(ctrl);
+	struct m5mols_info *info = to_m5mols(sd);
+	int ret;
+
+	switch (ctrl->id) {
+	case V4L2_CID_ZOOM_ABSOLUTE:
+		return m5mols_write(sd, MON_ZOOM, ctrl->val);
+
+	case V4L2_CID_EXPOSURE_AUTO:
+		ret = m5mols_lock_ae(info,
+			ctrl->val == V4L2_EXPOSURE_AUTO ? false : true);
+		if (!ret && ctrl->val == V4L2_EXPOSURE_AUTO)
+			ret = m5mols_write(sd, AE_MODE, REG_AE_ALL);
+		if (!ret && ctrl->val == V4L2_EXPOSURE_MANUAL) {
+			int val = info->exposure->val;
+			ret = m5mols_write(sd, AE_MODE, REG_AE_OFF);
+			if (!ret)
+				ret = m5mols_write(sd, AE_MAN_GAIN_MON, val);
+			if (!ret)
+				ret = m5mols_write(sd, AE_MAN_GAIN_CAP, val);
+		}
+		return ret;
+
+	case V4L2_CID_AUTO_WHITE_BALANCE:
+		ret = m5mols_lock_awb(info, ctrl->val ? false : true);
+		if (!ret)
+			ret = m5mols_write(sd, AWB_MODE, ctrl->val ?
+				REG_AWB_AUTO : REG_AWB_PRESET);
+		return ret;
+
+	case V4L2_CID_SATURATION:
+		ret = m5mols_write(sd, MON_CHROMA_LVL, ctrl->val);
+		if (!ret)
+			ret = m5mols_write(sd, MON_CHROMA_EN, REG_CHROMA_ON);
+		return ret;
+
+	case V4L2_CID_COLORFX:
+		/*
+		 * This control uses two kinds of registers: normal & color.
+		 * The normal effect belongs to category 1, while the color
+		 * one belongs to category 2.
+		 *
+		 * The normal effect uses one register: CAT1_EFFECT.
+		 * The color effect uses three registers:
+		 * CAT2_COLOR_EFFECT, CAT2_CFIXR, CAT2_CFIXB.
+		 */
+		ret = m5mols_write(sd, PARM_EFFECT,
+			ctrl->val == V4L2_COLORFX_NEGATIVE ? REG_EFFECT_NEGA :
+			ctrl->val == V4L2_COLORFX_EMBOSS ? REG_EFFECT_EMBOSS :
+			REG_EFFECT_OFF);
+		if (!ret)
+			ret = m5mols_write(sd, MON_EFFECT,
+				ctrl->val == V4L2_COLORFX_SEPIA ?
+				REG_COLOR_EFFECT_ON : REG_COLOR_EFFECT_OFF);
+		if (!ret)
+			ret = m5mols_write(sd, MON_CFIXR,
+				ctrl->val == V4L2_COLORFX_SEPIA ?
+				REG_CFIXR_SEPIA : 0);
+		if (!ret)
+			ret = m5mols_write(sd, MON_CFIXB,
+				ctrl->val == V4L2_COLORFX_SEPIA ?
+				REG_CFIXB_SEPIA : 0);
+		return ret;
+	}
+
+	return -EINVAL;
+}

drivers/media/video/m5mols/m5mols_core.c

@@ -0,0 +1,1004 @@
+/*
+ * Driver for M-5MOLS 8M Pixel camera sensor with ISP
+ *
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ * Author: HeungJun Kim, riverful.kim@samsung.com
+ *
+ * Copyright (C) 2009 Samsung Electronics Co., Ltd.
+ * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/version.h>
+#include <linux/gpio.h>
+#include <linux/regulator/consumer.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-subdev.h>
+#include <media/m5mols.h>
+
+#include "m5mols.h"
+#include "m5mols_reg.h"
+
+int m5mols_debug;
+module_param(m5mols_debug, int, 0644);
+
+#define MODULE_NAME		"M5MOLS"
+#define M5MOLS_I2C_CHECK_RETRY	500
+
+/* The regulator consumer names for external voltage regulators */
+static struct regulator_bulk_data supplies[] = {
+	{
+		.supply = "core",	/* ARM core power, 1.2V */
+	}, {
+		.supply	= "dig_18",	/* digital power 1, 1.8V */
+	}, {
+		.supply	= "d_sensor",	/* sensor power 1, 1.8V */
+	}, {
+		.supply	= "dig_28",	/* digital power 2, 2.8V */
+	}, {
+		.supply	= "a_sensor",	/* analog power */
+	}, {
+		.supply	= "dig_12",	/* digital power 3, 1.2V */
+	},
+};
+
+static struct v4l2_mbus_framefmt m5mols_default_ffmt[M5MOLS_RESTYPE_MAX] = {
+	[M5MOLS_RESTYPE_MONITOR] = {
+		.width		= 1920,
+		.height		= 1080,
+		.code		= V4L2_MBUS_FMT_VYUY8_2X8,
+		.field		= V4L2_FIELD_NONE,
+		.colorspace	= V4L2_COLORSPACE_JPEG,
+	},
+	[M5MOLS_RESTYPE_CAPTURE] = {
+		.width		= 1920,
+		.height		= 1080,
+		.code		= V4L2_MBUS_FMT_JPEG_1X8,
+		.field		= V4L2_FIELD_NONE,
+		.colorspace	= V4L2_COLORSPACE_JPEG,
+	},
+};
+#define SIZE_DEFAULT_FFMT	ARRAY_SIZE(m5mols_default_ffmt)
+
+static const struct m5mols_resolution m5mols_reg_res[] = {
+	{ 0x01, M5MOLS_RESTYPE_MONITOR, 128, 96 },	/* SUB-QCIF */
+	{ 0x03, M5MOLS_RESTYPE_MONITOR, 160, 120 },	/* QQVGA */
+	{ 0x05, M5MOLS_RESTYPE_MONITOR, 176, 144 },	/* QCIF */
+	{ 0x06, M5MOLS_RESTYPE_MONITOR, 176, 176 },
+	{ 0x08, M5MOLS_RESTYPE_MONITOR, 240, 320 },	/* QVGA */
+	{ 0x09, M5MOLS_RESTYPE_MONITOR, 320, 240 },	/* QVGA */
+	{ 0x0c, M5MOLS_RESTYPE_MONITOR, 240, 400 },	/* WQVGA */
+	{ 0x0d, M5MOLS_RESTYPE_MONITOR, 400, 240 },	/* WQVGA */
+	{ 0x0e, M5MOLS_RESTYPE_MONITOR, 352, 288 },	/* CIF */
+	{ 0x13, M5MOLS_RESTYPE_MONITOR, 480, 360 },
+	{ 0x15, M5MOLS_RESTYPE_MONITOR, 640, 360 },	/* qHD */
+	{ 0x17, M5MOLS_RESTYPE_MONITOR, 640, 480 },	/* VGA */
+	{ 0x18, M5MOLS_RESTYPE_MONITOR, 720, 480 },
+	{ 0x1a, M5MOLS_RESTYPE_MONITOR, 800, 480 },	/* WVGA */
+	{ 0x1f, M5MOLS_RESTYPE_MONITOR, 800, 600 },	/* SVGA */
+	{ 0x21, M5MOLS_RESTYPE_MONITOR, 1280, 720 },	/* HD */
+	{ 0x25, M5MOLS_RESTYPE_MONITOR, 1920, 1080 },	/* 1080p */
+	{ 0x29, M5MOLS_RESTYPE_MONITOR, 3264, 2448 },	/* 2.63fps 8M */
+	{ 0x39, M5MOLS_RESTYPE_MONITOR, 800, 602 },	/* AHS_MON debug */
+
+	{ 0x02, M5MOLS_RESTYPE_CAPTURE, 320, 240 },	/* QVGA */
+	{ 0x04, M5MOLS_RESTYPE_CAPTURE, 400, 240 },	/* WQVGA */
+	{ 0x07, M5MOLS_RESTYPE_CAPTURE, 480, 360 },
+	{ 0x08, M5MOLS_RESTYPE_CAPTURE, 640, 360 },	/* qHD */
+	{ 0x09, M5MOLS_RESTYPE_CAPTURE, 640, 480 },	/* VGA */
+	{ 0x0a, M5MOLS_RESTYPE_CAPTURE, 800, 480 },	/* WVGA */
+	{ 0x10, M5MOLS_RESTYPE_CAPTURE, 1280, 720 },	/* HD */
+	{ 0x14, M5MOLS_RESTYPE_CAPTURE, 1280, 960 },	/* 1M */
+	{ 0x17, M5MOLS_RESTYPE_CAPTURE, 1600, 1200 },	/* 2M */
+	{ 0x19, M5MOLS_RESTYPE_CAPTURE, 1920, 1080 },	/* Full-HD */
+	{ 0x1a, M5MOLS_RESTYPE_CAPTURE, 2048, 1152 },	/* 3Mega */
+	{ 0x1b, M5MOLS_RESTYPE_CAPTURE, 2048, 1536 },
+	{ 0x1c, M5MOLS_RESTYPE_CAPTURE, 2560, 1440 },	/* 4Mega */
+	{ 0x1d, M5MOLS_RESTYPE_CAPTURE, 2560, 1536 },
+	{ 0x1f, M5MOLS_RESTYPE_CAPTURE, 2560, 1920 },	/* 5Mega */
+	{ 0x21, M5MOLS_RESTYPE_CAPTURE, 3264, 1836 },	/* 6Mega */
+	{ 0x22, M5MOLS_RESTYPE_CAPTURE, 3264, 1960 },
+	{ 0x25, M5MOLS_RESTYPE_CAPTURE, 3264, 2448 },	/* 8Mega */
+};
+
+/**
+ * m5mols_swap_byte - an byte array to integer conversion function
+ * @size: size in bytes of I2C packet defined in the M-5MOLS datasheet
+ *
+ * Convert I2C data byte array with performing any required byte
+ * reordering to assure proper values for each data type, regardless
+ * of the architecture endianness.
+ */
+static u32 m5mols_swap_byte(u8 *data, u8 length)
+{
+	if (length == 1)
+		return *data;
+	else if (length == 2)
+		return be16_to_cpu(*((u16 *)data));
+	else
+		return be32_to_cpu(*((u32 *)data));
+}
+
+/**
+ * m5mols_read -  I2C read function
+ * @reg: combination of size, category and command for the I2C packet
+ * @val: read value
+ */
+int m5mols_read(struct v4l2_subdev *sd, u32 reg, u32 *val)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	u8 rbuf[M5MOLS_I2C_MAX_SIZE + 1];
+	u8 size = I2C_SIZE(reg);
+	u8 category = I2C_CATEGORY(reg);
+	u8 cmd = I2C_COMMAND(reg);
+	struct i2c_msg msg[2];
+	u8 wbuf[5];
+	int ret;
+
+	if (!client->adapter)
+		return -ENODEV;
+
+	if (size != 1 && size != 2 && size != 4) {
+		v4l2_err(sd, "Wrong data size\n");
+		return -EINVAL;
+	}
+
+	msg[0].addr = client->addr;
+	msg[0].flags = 0;
+	msg[0].len = 5;
+	msg[0].buf = wbuf;
+	wbuf[0] = 5;
+	wbuf[1] = M5MOLS_BYTE_READ;
+	wbuf[2] = category;
+	wbuf[3] = cmd;
+	wbuf[4] = size;
+
+	msg[1].addr = client->addr;
+	msg[1].flags = I2C_M_RD;
+	msg[1].len = size + 1;
+	msg[1].buf = rbuf;
+
+	/* minimum stabilization time */
+	usleep_range(200, 200);
+
+	ret = i2c_transfer(client->adapter, msg, 2);
+	if (ret < 0) {
+		v4l2_err(sd, "read failed: size:%d cat:%02x cmd:%02x. %d\n",
+			 size, category, cmd, ret);
+		return ret;
+	}
+
+	*val = m5mols_swap_byte(&rbuf[1], size);
+
+	return 0;
+}
+
+/**
+ * m5mols_write - I2C command write function
+ * @reg: combination of size, category and command for the I2C packet
+ * @val: value to write
+ */
+int m5mols_write(struct v4l2_subdev *sd, u32 reg, u32 val)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	u8 wbuf[M5MOLS_I2C_MAX_SIZE + 4];
+	u8 category = I2C_CATEGORY(reg);
+	u8 cmd = I2C_COMMAND(reg);
+	u8 size	= I2C_SIZE(reg);
+	u32 *buf = (u32 *)&wbuf[4];
+	struct i2c_msg msg[1];
+	int ret;
+
+	if (!client->adapter)
+		return -ENODEV;
+
+	if (size != 1 && size != 2 && size != 4) {
+		v4l2_err(sd, "Wrong data size\n");
+		return -EINVAL;
+	}
+
+	msg->addr = client->addr;
+	msg->flags = 0;
+	msg->len = (u16)size + 4;
+	msg->buf = wbuf;
+	wbuf[0] = size + 4;
+	wbuf[1] = M5MOLS_BYTE_WRITE;
+	wbuf[2] = category;
+	wbuf[3] = cmd;
+
+	*buf = m5mols_swap_byte((u8 *)&val, size);
+
+	usleep_range(200, 200);
+
+	ret = i2c_transfer(client->adapter, msg, 1);
+	if (ret < 0) {
+		v4l2_err(sd, "write failed: size:%d cat:%02x cmd:%02x. %d\n",
+			size, category, cmd, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+int m5mols_busy(struct v4l2_subdev *sd, u8 category, u8 cmd, u32 mask)
+{
+	u32 busy, i;
+	int ret;
+
+	for (i = 0; i < M5MOLS_I2C_CHECK_RETRY; i++) {
+		ret = m5mols_read(sd, I2C_REG(category, cmd, 1), &busy);
+		if (ret < 0)
+			return ret;
+		if ((busy & mask) == mask)
+			return 0;
+	}
+	return -EBUSY;
+}
+
+/**
+ * m5mols_enable_interrupt - Clear interrupt pending bits and unmask interrupts
+ *
+ * Before writing desired interrupt value the INT_FACTOR register should
+ * be read to clear pending interrupts.
+ */
+int m5mols_enable_interrupt(struct v4l2_subdev *sd, u32 reg)
+{
+	struct m5mols_info *info = to_m5mols(sd);
+	u32 mask = is_available_af(info) ? REG_INT_AF : 0;
+	u32 dummy;
+	int ret;
+
+	ret = m5mols_read(sd, SYSTEM_INT_FACTOR, &dummy);
+	if (!ret)
+		ret = m5mols_write(sd, SYSTEM_INT_ENABLE, reg & ~mask);
+	return ret;
+}
+
+/**
+ * m5mols_reg_mode - Write the mode and check busy status
+ *
+ * It always accompanies a little delay changing the M-5MOLS mode, so it is
+ * needed checking current busy status to guarantee right mode.
+ */
+static int m5mols_reg_mode(struct v4l2_subdev *sd, u32 mode)
+{
+	int ret = m5mols_write(sd, SYSTEM_SYSMODE, mode);
+
+	return ret ? ret : m5mols_busy(sd, CAT_SYSTEM, CAT0_SYSMODE, mode);
+}
+
+/**
+ * m5mols_mode - manage the M-5MOLS's mode
+ * @mode: the required operation mode
+ *
+ * The commands of M-5MOLS are grouped into specific modes. Each functionality
+ * can be guaranteed only when the sensor is operating in mode which which
+ * a command belongs to.
+ */
+int m5mols_mode(struct m5mols_info *info, u32 mode)
+{
+	struct v4l2_subdev *sd = &info->sd;
+	int ret = -EINVAL;
+	u32 reg;
+
+	if (mode < REG_PARAMETER && mode > REG_CAPTURE)
+		return ret;
+
+	ret = m5mols_read(sd, SYSTEM_SYSMODE, &reg);
+	if ((!ret && reg == mode) || ret)
+		return ret;
+
+	switch (reg) {
+	case REG_PARAMETER:
+		ret = m5mols_reg_mode(sd, REG_MONITOR);
+		if (!ret && mode == REG_MONITOR)
+			break;
+		if (!ret)
+			ret = m5mols_reg_mode(sd, REG_CAPTURE);
+		break;
+
+	case REG_MONITOR:
+		if (mode == REG_PARAMETER) {
+			ret = m5mols_reg_mode(sd, REG_PARAMETER);
+			break;
+		}
+
+		ret = m5mols_reg_mode(sd, REG_CAPTURE);
+		break;
+
+	case REG_CAPTURE:
+		ret = m5mols_reg_mode(sd, REG_MONITOR);
+		if (!ret && mode == REG_MONITOR)
+			break;
+		if (!ret)
+			ret = m5mols_reg_mode(sd, REG_PARAMETER);
+		break;
+
+	default:
+		v4l2_warn(sd, "Wrong mode: %d\n", mode);
+	}
+
+	if (!ret)
+		info->mode = mode;
+
+	return ret;
+}
+
+/**
+ * m5mols_get_version - retrieve full revisions information of M-5MOLS
+ *
+ * The version information includes revisions of hardware and firmware,
+ * AutoFocus alghorithm version and the version string.
+ */
+static int m5mols_get_version(struct v4l2_subdev *sd)
+{
+	struct m5mols_info *info = to_m5mols(sd);
+	union {
+		struct m5mols_version ver;
+		u8 bytes[VERSION_SIZE];
+	} version;
+	u32 *value;
+	u8 cmd = CAT0_VER_CUSTOMER;
+	int ret;
+
+	do {
+		value = (u32 *)&version.bytes[cmd];
+		ret = m5mols_read(sd, SYSTEM_CMD(cmd), value);
+		if (ret)
+			return ret;
+	} while (cmd++ != CAT0_VER_AWB);
+
+	do {
+		value = (u32 *)&version.bytes[cmd];
+		ret = m5mols_read(sd, SYSTEM_VER_STRING, value);
+		if (ret)
+			return ret;
+		if (cmd >= VERSION_SIZE - 1)
+			return -EINVAL;
+	} while (version.bytes[cmd++]);
+
+	value = (u32 *)&version.bytes[cmd];
+	ret = m5mols_read(sd, AF_VERSION, value);
+	if (ret)
+		return ret;
+
+	/* store version information swapped for being readable */
+	info->ver	= version.ver;
+	info->ver.fw	= be16_to_cpu(info->ver.fw);
+	info->ver.hw	= be16_to_cpu(info->ver.hw);
+	info->ver.param	= be16_to_cpu(info->ver.param);
+	info->ver.awb	= be16_to_cpu(info->ver.awb);
+
+	v4l2_info(sd, "Manufacturer\t[%s]\n",
+			is_manufacturer(info, REG_SAMSUNG_ELECTRO) ?
+			"Samsung Electro-Machanics" :
+			is_manufacturer(info, REG_SAMSUNG_OPTICS) ?
+			"Samsung Fiber-Optics" :
+			is_manufacturer(info, REG_SAMSUNG_TECHWIN) ?
+			"Samsung Techwin" : "None");
+	v4l2_info(sd, "Customer/Project\t[0x%02x/0x%02x]\n",
+			info->ver.customer, info->ver.project);
+
+	if (!is_available_af(info))
+		v4l2_info(sd, "No support Auto Focus on this firmware\n");
+
+	return ret;
+}
+
+/**
+ * __find_restype - Lookup M-5MOLS resolution type according to pixel code
+ * @code: pixel code
+ */
+static enum m5mols_restype __find_restype(enum v4l2_mbus_pixelcode code)
+{
+	enum m5mols_restype type = M5MOLS_RESTYPE_MONITOR;
+
+	do {
+		if (code == m5mols_default_ffmt[type].code)
+			return type;
+	} while (type++ != SIZE_DEFAULT_FFMT);
+
+	return 0;
+}
+
+/**
+ * __find_resolution - Lookup preset and type of M-5MOLS's resolution
+ * @mf: pixel format to find/negotiate the resolution preset for
+ * @type: M-5MOLS resolution type
+ * @resolution:	M-5MOLS resolution preset register value
+ *
+ * Find nearest resolution matching resolution preset and adjust mf
+ * to supported values.
+ */
+static int __find_resolution(struct v4l2_subdev *sd,
+			     struct v4l2_mbus_framefmt *mf,
+			     enum m5mols_restype *type,
+			     u32 *resolution)
+{
+	const struct m5mols_resolution *fsize = &m5mols_reg_res[0];
+	const struct m5mols_resolution *match = NULL;
+	enum m5mols_restype stype = __find_restype(mf->code);
+	int i = ARRAY_SIZE(m5mols_reg_res);
+	unsigned int min_err = ~0;
+
+	while (i--) {
+		int err;
+		if (stype == fsize->type) {
+			err = abs(fsize->width - mf->width)
+				+ abs(fsize->height - mf->height);
+
+			if (err < min_err) {
+				min_err = err;
+				match = fsize;
+			}
+		}
+		fsize++;
+	}
+	if (match) {
+		mf->width  = match->width;
+		mf->height = match->height;
+		*resolution = match->reg;
+		*type = stype;
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static struct v4l2_mbus_framefmt *__find_format(struct m5mols_info *info,
+				struct v4l2_subdev_fh *fh,
+				enum v4l2_subdev_format_whence which,
+				enum m5mols_restype type)
+{
+	if (which == V4L2_SUBDEV_FORMAT_TRY)
+		return fh ? v4l2_subdev_get_try_format(fh, 0) : NULL;
+
+	return &info->ffmt[type];
+}
+
+static int m5mols_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+			  struct v4l2_subdev_format *fmt)
+{
+	struct m5mols_info *info = to_m5mols(sd);
+	struct v4l2_mbus_framefmt *format;
+
+	if (fmt->pad != 0)
+		return -EINVAL;
+
+	format = __find_format(info, fh, fmt->which, info->res_type);
+	if (!format)
+		return -EINVAL;
+
+	fmt->format = *format;
+	return 0;
+}
+
+static int m5mols_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+			  struct v4l2_subdev_format *fmt)
+{
+	struct m5mols_info *info = to_m5mols(sd);
+	struct v4l2_mbus_framefmt *format = &fmt->format;
+	struct v4l2_mbus_framefmt *sfmt;
+	enum m5mols_restype type;
+	u32 resolution = 0;
+	int ret;
+
+	if (fmt->pad != 0)
+		return -EINVAL;
+
+	ret = __find_resolution(sd, format, &type, &resolution);
+	if (ret < 0)
+		return ret;
+
+	sfmt = __find_format(info, fh, fmt->which, type);
+	if (!sfmt)
+		return 0;
+
+	*sfmt		= m5mols_default_ffmt[type];
+	sfmt->width	= format->width;
+	sfmt->height	= format->height;
+
+	if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
+		info->resolution = resolution;
+		info->code = format->code;
+		info->res_type = type;
+	}
+
+	return 0;
+}
+
+static int m5mols_enum_mbus_code(struct v4l2_subdev *sd,
+				 struct v4l2_subdev_fh *fh,
+				 struct v4l2_subdev_mbus_code_enum *code)
+{
+	if (!code || code->index >= SIZE_DEFAULT_FFMT)
+		return -EINVAL;
+
+	code->code = m5mols_default_ffmt[code->index].code;
+
+	return 0;
+}
+
+static struct v4l2_subdev_pad_ops m5mols_pad_ops = {
+	.enum_mbus_code	= m5mols_enum_mbus_code,
+	.get_fmt	= m5mols_get_fmt,
+	.set_fmt	= m5mols_set_fmt,
+};
+
+/**
+ * m5mols_sync_controls - Apply default scene mode and the current controls
+ *
+ * This is used only streaming for syncing between v4l2_ctrl framework and
+ * m5mols's controls. First, do the scenemode to the sensor, then call
+ * v4l2_ctrl_handler_setup. It can be same between some commands and
+ * the scenemode's in the default v4l2_ctrls. But, such commands of control
+ * should be prior to the scenemode's one.
+ */
+int m5mols_sync_controls(struct m5mols_info *info)
+{
+	int ret = -EINVAL;
+
+	if (!is_ctrl_synced(info)) {
+		ret = m5mols_do_scenemode(info, REG_SCENE_NORMAL);
+		if (ret)
+			return ret;
+
+		v4l2_ctrl_handler_setup(&info->handle);
+		info->ctrl_sync = true;
+	}
+
+	return ret;
+}
+
+/**
+ * m5mols_start_monitor - Start the monitor mode
+ *
+ * Before applying the controls setup the resolution and frame rate
+ * in PARAMETER mode, and then switch over to MONITOR mode.
+ */
+static int m5mols_start_monitor(struct m5mols_info *info)
+{
+	struct v4l2_subdev *sd = &info->sd;
+	int ret;
+
+	ret = m5mols_mode(info, REG_PARAMETER);
+	if (!ret)
+		ret = m5mols_write(sd, PARM_MON_SIZE, info->resolution);
+	if (!ret)
+		ret = m5mols_write(sd, PARM_MON_FPS, REG_FPS_30);
+	if (!ret)
+		ret = m5mols_mode(info, REG_MONITOR);
+	if (!ret)
+		ret = m5mols_sync_controls(info);
+
+	return ret;
+}
+
+static int m5mols_s_stream(struct v4l2_subdev *sd, int enable)
+{
+	struct m5mols_info *info = to_m5mols(sd);
+
+	if (enable) {
+		int ret = -EINVAL;
+
+		if (is_code(info->code, M5MOLS_RESTYPE_MONITOR))
+			ret = m5mols_start_monitor(info);
+		if (is_code(info->code, M5MOLS_RESTYPE_CAPTURE))
+			ret = m5mols_start_capture(info);
+
+		return ret;
+	}
+
+	return m5mols_mode(info, REG_PARAMETER);
+}
+
+static const struct v4l2_subdev_video_ops m5mols_video_ops = {
+	.s_stream	= m5mols_s_stream,
+};
+
+static int m5mols_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct v4l2_subdev *sd = to_sd(ctrl);
+	struct m5mols_info *info = to_m5mols(sd);
+	int ret;
+
+	info->mode_save = info->mode;
+
+	ret = m5mols_mode(info, REG_PARAMETER);
+	if (!ret)
+		ret = m5mols_set_ctrl(ctrl);
+	if (!ret)
+		ret = m5mols_mode(info, info->mode_save);
+
+	return ret;
+}
+
+static const struct v4l2_ctrl_ops m5mols_ctrl_ops = {
+	.s_ctrl	= m5mols_s_ctrl,
+};
+
+static int m5mols_sensor_power(struct m5mols_info *info, bool enable)
+{
+	struct v4l2_subdev *sd = &info->sd;
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	const struct m5mols_platform_data *pdata = info->pdata;
+	int ret;
+
+	if (enable) {
+		if (is_powered(info))
+			return 0;
+
+		if (info->set_power) {
+			ret = info->set_power(&client->dev, 1);
+			if (ret)
+				return ret;
+		}
+
+		ret = regulator_bulk_enable(ARRAY_SIZE(supplies), supplies);
+		if (ret) {
+			info->set_power(&client->dev, 0);
+			return ret;
+		}
+
+		gpio_set_value(pdata->gpio_reset, !pdata->reset_polarity);
+		usleep_range(1000, 1000);
+		info->power = true;
+
+		return ret;
+	}
+
+	if (!is_powered(info))
+		return 0;
+
+	ret = regulator_bulk_disable(ARRAY_SIZE(supplies), supplies);
+	if (ret)
+		return ret;
+
+	if (info->set_power)
+		info->set_power(&client->dev, 0);
+
+	gpio_set_value(pdata->gpio_reset, pdata->reset_polarity);
+	usleep_range(1000, 1000);
+	info->power = false;
+
+	return ret;
+}
+
+/* m5mols_update_fw - optional firmware update routine */
+int __attribute__ ((weak)) m5mols_update_fw(struct v4l2_subdev *sd,
+		int (*set_power)(struct m5mols_info *, bool))
+{
+	return 0;
+}
+
+/**
+ * m5mols_sensor_armboot - Booting M-5MOLS internal ARM core.
+ *
+ * Booting internal ARM core makes the M-5MOLS is ready for getting commands
+ * with I2C. It's the first thing to be done after it powered up. It must wait
+ * at least 520ms recommended by M-5MOLS datasheet, after executing arm booting.
+ */
+static int m5mols_sensor_armboot(struct v4l2_subdev *sd)
+{
+	int ret;
+
+	ret = m5mols_write(sd, FLASH_CAM_START, REG_START_ARM_BOOT);
+	if (ret < 0)
+		return ret;
+
+	msleep(520);
+
+	ret = m5mols_get_version(sd);
+	if (!ret)
+		ret = m5mols_update_fw(sd, m5mols_sensor_power);
+	if (ret)
+		return ret;
+
+	v4l2_dbg(1, m5mols_debug, sd, "Success ARM Booting\n");
+
+	ret = m5mols_write(sd, PARM_INTERFACE, REG_INTERFACE_MIPI);
+	if (!ret)
+		ret = m5mols_enable_interrupt(sd, REG_INT_AF);
+
+	return ret;
+}
+
+static int m5mols_init_controls(struct m5mols_info *info)
+{
+	struct v4l2_subdev *sd = &info->sd;
+	u16 max_exposure;
+	u16 step_zoom;
+	int ret;
+
+	/* Determine value's range & step of controls for various FW version */
+	ret = m5mols_read(sd, AE_MAX_GAIN_MON, (u32 *)&max_exposure);
+	if (!ret)
+		step_zoom = is_manufacturer(info, REG_SAMSUNG_OPTICS) ? 31 : 1;
+	if (ret)
+		return ret;
+
+	v4l2_ctrl_handler_init(&info->handle, 6);
+	info->autowb = v4l2_ctrl_new_std(&info->handle,
+			&m5mols_ctrl_ops, V4L2_CID_AUTO_WHITE_BALANCE,
+			0, 1, 1, 0);
+	info->saturation = v4l2_ctrl_new_std(&info->handle,
+			&m5mols_ctrl_ops, V4L2_CID_SATURATION,
+			1, 5, 1, 3);
+	info->zoom = v4l2_ctrl_new_std(&info->handle,
+			&m5mols_ctrl_ops, V4L2_CID_ZOOM_ABSOLUTE,
+			1, 70, step_zoom, 1);
+	info->exposure = v4l2_ctrl_new_std(&info->handle,
+			&m5mols_ctrl_ops, V4L2_CID_EXPOSURE,
+			0, max_exposure, 1, (int)max_exposure/2);
+	info->colorfx = v4l2_ctrl_new_std_menu(&info->handle,
+			&m5mols_ctrl_ops, V4L2_CID_COLORFX,
+			4, (1 << V4L2_COLORFX_BW), V4L2_COLORFX_NONE);
+	info->autoexposure = v4l2_ctrl_new_std_menu(&info->handle,
+			&m5mols_ctrl_ops, V4L2_CID_EXPOSURE_AUTO,
+			1, 0, V4L2_EXPOSURE_MANUAL);
+
+	sd->ctrl_handler = &info->handle;
+	if (info->handle.error) {
+		v4l2_err(sd, "Failed to initialize controls: %d\n", ret);
+		v4l2_ctrl_handler_free(&info->handle);
+		return info->handle.error;
+	}
+
+	v4l2_ctrl_cluster(2, &info->autoexposure);
+
+	return 0;
+}
+
+/**
+ * m5mols_s_power - Main sensor power control function
+ *
+ * To prevent breaking the lens when the sensor is powered off the Soft-Landing
+ * algorithm is called where available. The Soft-Landing algorithm availability
+ * dependends on the firmware provider.
+ */
+static int m5mols_s_power(struct v4l2_subdev *sd, int on)
+{
+	struct m5mols_info *info = to_m5mols(sd);
+	int ret;
+
+	if (on) {
+		ret = m5mols_sensor_power(info, true);
+		if (!ret)
+			ret = m5mols_sensor_armboot(sd);
+		if (!ret)
+			ret = m5mols_init_controls(info);
+		if (ret)
+			return ret;
+
+		info->ffmt[M5MOLS_RESTYPE_MONITOR] =
+			m5mols_default_ffmt[M5MOLS_RESTYPE_MONITOR];
+		info->ffmt[M5MOLS_RESTYPE_CAPTURE] =
+			m5mols_default_ffmt[M5MOLS_RESTYPE_CAPTURE];
+		return ret;
+	}
+
+	if (is_manufacturer(info, REG_SAMSUNG_TECHWIN)) {
+		ret = m5mols_mode(info, REG_MONITOR);
+		if (!ret)
+			ret = m5mols_write(sd, AF_EXECUTE, REG_AF_STOP);
+		if (!ret)
+			ret = m5mols_write(sd, AF_MODE, REG_AF_POWEROFF);
+		if (!ret)
+			ret = m5mols_busy(sd, CAT_SYSTEM, CAT0_STATUS,
+					REG_AF_IDLE);
+		if (!ret)
+			v4l2_info(sd, "Success soft-landing lens\n");
+	}
+
+	ret = m5mols_sensor_power(info, false);
+	if (!ret) {
+		v4l2_ctrl_handler_free(&info->handle);
+		info->ctrl_sync = false;
+	}
+
+	return ret;
+}
+
+static int m5mols_log_status(struct v4l2_subdev *sd)
+{
+	struct m5mols_info *info = to_m5mols(sd);
+
+	v4l2_ctrl_handler_log_status(&info->handle, sd->name);
+
+	return 0;
+}
+
+static const struct v4l2_subdev_core_ops m5mols_core_ops = {
+	.s_power	= m5mols_s_power,
+	.g_ctrl		= v4l2_subdev_g_ctrl,
+	.s_ctrl		= v4l2_subdev_s_ctrl,
+	.queryctrl	= v4l2_subdev_queryctrl,
+	.querymenu	= v4l2_subdev_querymenu,
+	.g_ext_ctrls	= v4l2_subdev_g_ext_ctrls,
+	.try_ext_ctrls	= v4l2_subdev_try_ext_ctrls,
+	.s_ext_ctrls	= v4l2_subdev_s_ext_ctrls,
+	.log_status	= m5mols_log_status,
+};
+
+static const struct v4l2_subdev_ops m5mols_ops = {
+	.core		= &m5mols_core_ops,
+	.pad		= &m5mols_pad_ops,
+	.video		= &m5mols_video_ops,
+};
+
+static void m5mols_irq_work(struct work_struct *work)
+{
+	struct m5mols_info *info =
+		container_of(work, struct m5mols_info, work_irq);
+	struct v4l2_subdev *sd = &info->sd;
+	u32 reg;
+	int ret;
+
+	if (!is_powered(info) ||
+			m5mols_read(sd, SYSTEM_INT_FACTOR, &info->interrupt))
+		return;
+
+	switch (info->interrupt & REG_INT_MASK) {
+	case REG_INT_AF:
+		if (!is_available_af(info))
+			break;
+		ret = m5mols_read(sd, AF_STATUS, &reg);
+		v4l2_dbg(2, m5mols_debug, sd, "AF %s\n",
+			 reg == REG_AF_FAIL ? "Failed" :
+			 reg == REG_AF_SUCCESS ? "Success" :
+			 reg == REG_AF_IDLE ? "Idle" : "Busy");
+		break;
+	case REG_INT_CAPTURE:
+		if (!test_and_set_bit(ST_CAPT_IRQ, &info->flags))
+			wake_up_interruptible(&info->irq_waitq);
+
+		v4l2_dbg(2, m5mols_debug, sd, "CAPTURE\n");
+		break;
+	default:
+		v4l2_dbg(2, m5mols_debug, sd, "Undefined: %02x\n", reg);
+		break;
+	};
+}
+
+static irqreturn_t m5mols_irq_handler(int irq, void *data)
+{
+	struct v4l2_subdev *sd = data;
+	struct m5mols_info *info = to_m5mols(sd);
+
+	schedule_work(&info->work_irq);
+
+	return IRQ_HANDLED;
+}
+
+static int __devinit m5mols_probe(struct i2c_client *client,
+				  const struct i2c_device_id *id)
+{
+	const struct m5mols_platform_data *pdata = client->dev.platform_data;
+	struct m5mols_info *info;
+	struct v4l2_subdev *sd;
+	int ret;
+
+	if (pdata == NULL) {
+		dev_err(&client->dev, "No platform data\n");
+		return -EINVAL;
+	}
+
+	if (!gpio_is_valid(pdata->gpio_reset)) {
+		dev_err(&client->dev, "No valid RESET GPIO specified\n");
+		return -EINVAL;
+	}
+
+	if (!pdata->irq) {
+		dev_err(&client->dev, "Interrupt not assigned\n");
+		return -EINVAL;
+	}
+
+	info = kzalloc(sizeof(struct m5mols_info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->pdata = pdata;
+	info->set_power	= pdata->set_power;
+
+	ret = gpio_request(pdata->gpio_reset, "M5MOLS_NRST");
+	if (ret) {
+		dev_err(&client->dev, "Failed to request gpio: %d\n", ret);
+		goto out_free;
+	}
+	gpio_direction_output(pdata->gpio_reset, pdata->reset_polarity);
+
+	ret = regulator_bulk_get(&client->dev, ARRAY_SIZE(supplies), supplies);
+	if (ret) {
+		dev_err(&client->dev, "Failed to get regulators: %d\n", ret);
+		goto out_gpio;
+	}
+
+	sd = &info->sd;
+	strlcpy(sd->name, MODULE_NAME, sizeof(sd->name));
+	v4l2_i2c_subdev_init(sd, client, &m5mols_ops);
+
+	info->pad.flags = MEDIA_PAD_FL_SOURCE;
+	ret = media_entity_init(&sd->entity, 1, &info->pad, 0);
+	if (ret < 0)
+		goto out_reg;
+	sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR;
+
+	init_waitqueue_head(&info->irq_waitq);
+	INIT_WORK(&info->work_irq, m5mols_irq_work);
+	ret = request_irq(pdata->irq, m5mols_irq_handler,
+			  IRQF_TRIGGER_RISING, MODULE_NAME, sd);
+	if (ret) {
+		dev_err(&client->dev, "Interrupt request failed: %d\n", ret);
+		goto out_me;
+	}
+	info->res_type = M5MOLS_RESTYPE_MONITOR;
+	return 0;
+out_me:
+	media_entity_cleanup(&sd->entity);
+out_reg:
+	regulator_bulk_free(ARRAY_SIZE(supplies), supplies);
+out_gpio:
+	gpio_free(pdata->gpio_reset);
+out_free:
+	kfree(info);
+	return ret;
+}
+
+static int __devexit m5mols_remove(struct i2c_client *client)
+{
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct m5mols_info *info = to_m5mols(sd);
+
+	v4l2_device_unregister_subdev(sd);
+	free_irq(info->pdata->irq, sd);
+
+	regulator_bulk_free(ARRAY_SIZE(supplies), supplies);
+	gpio_free(info->pdata->gpio_reset);
+	media_entity_cleanup(&sd->entity);
+	kfree(info);
+	return 0;
+}
+
+static const struct i2c_device_id m5mols_id[] = {
+	{ MODULE_NAME, 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, m5mols_id);
+
+static struct i2c_driver m5mols_i2c_driver = {
+	.driver = {
+		.name	= MODULE_NAME,
+	},
+	.probe		= m5mols_probe,
+	.remove		= __devexit_p(m5mols_remove),
+	.id_table	= m5mols_id,
+};
+
+static int __init m5mols_mod_init(void)
+{
+	return i2c_add_driver(&m5mols_i2c_driver);
+}
+
+static void __exit m5mols_mod_exit(void)
+{
+	i2c_del_driver(&m5mols_i2c_driver);
+}
+
+module_init(m5mols_mod_init);
+module_exit(m5mols_mod_exit);
+
+MODULE_AUTHOR("HeungJun Kim <riverful.kim@samsung.com>");
+MODULE_AUTHOR("Dongsoo Kim <dongsoo45.kim@samsung.com>");
+MODULE_DESCRIPTION("Fujitsu M-5MOLS 8M Pixel camera driver");
+MODULE_LICENSE("GPL");

drivers/media/video/m5mols/m5mols_reg.h

@@ -0,0 +1,399 @@
+/*
+ * Register map for M-5MOLS 8M Pixel camera sensor with ISP
+ *
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ * Author: HeungJun Kim, riverful.kim@samsung.com
+ *
+ * Copyright (C) 2009 Samsung Electronics Co., Ltd.
+ * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef M5MOLS_REG_H
+#define M5MOLS_REG_H
+
+#define M5MOLS_I2C_MAX_SIZE	4
+#define M5MOLS_BYTE_READ	0x01
+#define M5MOLS_BYTE_WRITE	0x02
+
+#define I2C_CATEGORY(__cat)		((__cat >> 16) & 0xff)
+#define I2C_COMMAND(__comm)		((__comm >> 8) & 0xff)
+#define I2C_SIZE(__reg_s)		((__reg_s) & 0xff)
+#define I2C_REG(__cat, __cmd, __reg_s)	((__cat << 16) | (__cmd << 8) | __reg_s)
+
+/*
+ * Category section register
+ *
+ * The category means set including relevant command of M-5MOLS.
+ */
+#define CAT_SYSTEM		0x00
+#define CAT_PARAM		0x01
+#define CAT_MONITOR		0x02
+#define CAT_AE			0x03
+#define CAT_WB			0x06
+#define CAT_EXIF		0x07
+#define CAT_FD			0x09
+#define CAT_LENS		0x0a
+#define CAT_CAPT_PARM		0x0b
+#define CAT_CAPT_CTRL		0x0c
+#define CAT_FLASH		0x0f	/* related to FW, revisions, booting */
+
+/*
+ * Category 0 - SYSTEM mode
+ *
+ * The SYSTEM mode in the M-5MOLS means area available to handle with the whole
+ * & all-round system of sensor. It deals with version/interrupt/setting mode &
+ * even sensor's status. Especially, the M-5MOLS sensor with ISP varies by
+ * packaging & manufacturer, even the customer and project code. And the
+ * function details may vary among them. The version information helps to
+ * determine what methods shall be used in the driver.
+ *
+ * There is many registers between customer version address and awb one. For
+ * more specific contents, see definition if file m5mols.h.
+ */
+#define CAT0_VER_CUSTOMER	0x00	/* customer version */
+#define CAT0_VER_AWB		0x09	/* Auto WB version */
+#define CAT0_VER_STRING		0x0a	/* string including M-5MOLS */
+#define CAT0_SYSMODE		0x0b	/* SYSTEM mode register */
+#define CAT0_STATUS		0x0c	/* SYSTEM mode status register */
+#define CAT0_INT_FACTOR		0x10	/* interrupt pending register */
+#define CAT0_INT_ENABLE		0x11	/* interrupt enable register */
+
+#define SYSTEM_SYSMODE		I2C_REG(CAT_SYSTEM, CAT0_SYSMODE, 1)
+#define REG_SYSINIT		0x00	/* SYSTEM mode */
+#define REG_PARAMETER		0x01	/* PARAMETER mode */
+#define REG_MONITOR		0x02	/* MONITOR mode */
+#define REG_CAPTURE		0x03	/* CAPTURE mode */
+
+#define SYSTEM_CMD(__cmd)	I2C_REG(CAT_SYSTEM, cmd, 1)
+#define SYSTEM_VER_STRING	I2C_REG(CAT_SYSTEM, CAT0_VER_STRING, 1)
+#define REG_SAMSUNG_ELECTRO	"SE"	/* Samsung Electro-Mechanics */
+#define REG_SAMSUNG_OPTICS	"OP"	/* Samsung Fiber-Optics */
+#define REG_SAMSUNG_TECHWIN	"TB"	/* Samsung Techwin */
+
+#define SYSTEM_INT_FACTOR	I2C_REG(CAT_SYSTEM, CAT0_INT_FACTOR, 1)
+#define SYSTEM_INT_ENABLE	I2C_REG(CAT_SYSTEM, CAT0_INT_ENABLE, 1)
+#define REG_INT_MODE		(1 << 0)
+#define REG_INT_AF		(1 << 1)
+#define REG_INT_ZOOM		(1 << 2)
+#define REG_INT_CAPTURE		(1 << 3)
+#define REG_INT_FRAMESYNC	(1 << 4)
+#define REG_INT_FD		(1 << 5)
+#define REG_INT_LENS_INIT	(1 << 6)
+#define REG_INT_SOUND		(1 << 7)
+#define REG_INT_MASK		0x0f
+
+/*
+ * category 1 - PARAMETER mode
+ *
+ * This category supports function of camera features of M-5MOLS. It means we
+ * can handle with preview(MONITOR) resolution size/frame per second/interface
+ * between the sensor and the Application Processor/even the image effect.
+ */
+#define CAT1_DATA_INTERFACE	0x00	/* interface between sensor and AP */
+#define CAT1_MONITOR_SIZE	0x01	/* resolution at the MONITOR mode */
+#define CAT1_MONITOR_FPS	0x02	/* frame per second at this mode */
+#define CAT1_EFFECT		0x0b	/* image effects */
+
+#define PARM_MON_SIZE		I2C_REG(CAT_PARAM, CAT1_MONITOR_SIZE, 1)
+
+#define PARM_MON_FPS		I2C_REG(CAT_PARAM, CAT1_MONITOR_FPS, 1)
+#define REG_FPS_30		0x02
+
+#define PARM_INTERFACE		I2C_REG(CAT_PARAM, CAT1_DATA_INTERFACE, 1)
+#define REG_INTERFACE_MIPI	0x02
+
+#define PARM_EFFECT		I2C_REG(CAT_PARAM, CAT1_EFFECT, 1)
+#define REG_EFFECT_OFF		0x00
+#define REG_EFFECT_NEGA		0x01
+#define REG_EFFECT_EMBOSS	0x06
+#define REG_EFFECT_OUTLINE	0x07
+#define REG_EFFECT_WATERCOLOR	0x08
+
+/*
+ * Category 2 - MONITOR mode
+ *
+ * The MONITOR mode is same as preview mode as we said. The M-5MOLS has another
+ * mode named "Preview", but this preview mode is used at the case specific
+ * vider-recording mode. This mmode supports only YUYV format. On the other
+ * hand, the JPEG & RAW formats is supports by CAPTURE mode. And, there are
+ * another options like zoom/color effect(different with effect in PARAMETER
+ * mode)/anti hand shaking algorithm.
+ */
+#define CAT2_ZOOM		0x01	/* set the zoom position & execute */
+#define CAT2_ZOOM_STEP		0x03	/* set the zoom step */
+#define CAT2_CFIXB		0x09	/* CB value for color effect */
+#define CAT2_CFIXR		0x0a	/* CR value for color effect */
+#define CAT2_COLOR_EFFECT	0x0b	/* set on/off of color effect */
+#define CAT2_CHROMA_LVL		0x0f	/* set chroma level */
+#define CAT2_CHROMA_EN		0x10	/* set on/off of choroma */
+#define CAT2_EDGE_LVL		0x11	/* set sharpness level */
+#define CAT2_EDGE_EN		0x12	/* set on/off sharpness */
+#define CAT2_TONE_CTL		0x25	/* set tone color(contrast) */
+
+#define MON_ZOOM		I2C_REG(CAT_MONITOR, CAT2_ZOOM, 1)
+
+#define MON_CFIXR		I2C_REG(CAT_MONITOR, CAT2_CFIXR, 1)
+#define MON_CFIXB		I2C_REG(CAT_MONITOR, CAT2_CFIXB, 1)
+#define REG_CFIXB_SEPIA		0xd8
+#define REG_CFIXR_SEPIA		0x18
+
+#define MON_EFFECT		I2C_REG(CAT_MONITOR, CAT2_COLOR_EFFECT, 1)
+#define REG_COLOR_EFFECT_OFF	0x00
+#define REG_COLOR_EFFECT_ON	0x01
+
+#define MON_CHROMA_EN		I2C_REG(CAT_MONITOR, CAT2_CHROMA_EN, 1)
+#define MON_CHROMA_LVL		I2C_REG(CAT_MONITOR, CAT2_CHROMA_LVL, 1)
+#define REG_CHROMA_OFF		0x00
+#define REG_CHROMA_ON		0x01
+
+#define MON_EDGE_EN		I2C_REG(CAT_MONITOR, CAT2_EDGE_EN, 1)
+#define MON_EDGE_LVL		I2C_REG(CAT_MONITOR, CAT2_EDGE_LVL, 1)
+#define REG_EDGE_OFF		0x00
+#define REG_EDGE_ON		0x01
+
+#define MON_TONE_CTL		I2C_REG(CAT_MONITOR, CAT2_TONE_CTL, 1)
+
+/*
+ * Category 3 - Auto Exposure
+ *
+ * The M-5MOLS exposure capbility is detailed as which is similar to digital
+ * camera. This category supports AE locking/various AE mode(range of exposure)
+ * /ISO/flickering/EV bias/shutter/meteoring, and anything else. And the
+ * maximum/minimum exposure gain value depending on M-5MOLS firmware, may be
+ * different. So, this category also provide getting the max/min values. And,
+ * each MONITOR and CAPTURE mode has each gain/shutter/max exposure values.
+ */
+#define CAT3_AE_LOCK		0x00	/* locking Auto exposure */
+#define CAT3_AE_MODE		0x01	/* set AE mode, mode means range */
+#define CAT3_ISO		0x05	/* set ISO */
+#define CAT3_EV_PRESET_MONITOR	0x0a	/* EV(scenemode) preset for MONITOR */
+#define CAT3_EV_PRESET_CAPTURE	0x0b	/* EV(scenemode) preset for CAPTURE */
+#define CAT3_MANUAL_GAIN_MON	0x12	/* meteoring value for the MONITOR */
+#define CAT3_MAX_GAIN_MON	0x1a	/* max gain value for the MONITOR */
+#define CAT3_MANUAL_GAIN_CAP	0x26	/* meteoring value for the CAPTURE */
+#define CAT3_AE_INDEX		0x38	/* AE index */
+
+#define AE_LOCK			I2C_REG(CAT_AE, CAT3_AE_LOCK, 1)
+#define REG_AE_UNLOCK		0x00
+#define REG_AE_LOCK		0x01
+
+#define AE_MODE			I2C_REG(CAT_AE, CAT3_AE_MODE, 1)
+#define REG_AE_OFF		0x00	/* AE off */
+#define REG_AE_ALL		0x01	/* calc AE in all block integral */
+#define REG_AE_CENTER		0x03	/* calc AE in center weighted */
+#define REG_AE_SPOT		0x06	/* calc AE in specific spot */
+
+#define AE_ISO			I2C_REG(CAT_AE, CAT3_ISO, 1)
+#define REG_ISO_AUTO		0x00
+#define REG_ISO_50		0x01
+#define REG_ISO_100		0x02
+#define REG_ISO_200		0x03
+#define REG_ISO_400		0x04
+#define REG_ISO_800		0x05
+
+#define AE_EV_PRESET_MONITOR	I2C_REG(CAT_AE, CAT3_EV_PRESET_MONITOR, 1)
+#define AE_EV_PRESET_CAPTURE	I2C_REG(CAT_AE, CAT3_EV_PRESET_CAPTURE, 1)
+#define REG_SCENE_NORMAL	0x00
+#define REG_SCENE_PORTRAIT	0x01
+#define REG_SCENE_LANDSCAPE	0x02
+#define REG_SCENE_SPORTS	0x03
+#define REG_SCENE_PARTY_INDOOR	0x04
+#define REG_SCENE_BEACH_SNOW	0x05
+#define REG_SCENE_SUNSET	0x06
+#define REG_SCENE_DAWN_DUSK	0x07
+#define REG_SCENE_FALL		0x08
+#define REG_SCENE_NIGHT		0x09
+#define REG_SCENE_AGAINST_LIGHT	0x0a
+#define REG_SCENE_FIRE		0x0b
+#define REG_SCENE_TEXT		0x0c
+#define REG_SCENE_CANDLE	0x0d
+
+#define AE_MAN_GAIN_MON		I2C_REG(CAT_AE, CAT3_MANUAL_GAIN_MON, 2)
+#define AE_MAX_GAIN_MON		I2C_REG(CAT_AE, CAT3_MAX_GAIN_MON, 2)
+#define AE_MAN_GAIN_CAP		I2C_REG(CAT_AE, CAT3_MANUAL_GAIN_CAP, 2)
+
+#define AE_INDEX		I2C_REG(CAT_AE, CAT3_AE_INDEX, 1)
+#define REG_AE_INDEX_20_NEG	0x00
+#define REG_AE_INDEX_15_NEG	0x01
+#define REG_AE_INDEX_10_NEG	0x02
+#define REG_AE_INDEX_05_NEG	0x03
+#define REG_AE_INDEX_00		0x04
+#define REG_AE_INDEX_05_POS	0x05
+#define REG_AE_INDEX_10_POS	0x06
+#define REG_AE_INDEX_15_POS	0x07
+#define REG_AE_INDEX_20_POS	0x08
+
+/*
+ * Category 6 - White Balance
+ *
+ * This category provide AWB locking/mode/preset/speed/gain bias, etc.
+ */
+#define CAT6_AWB_LOCK		0x00	/* locking Auto Whitebalance */
+#define CAT6_AWB_MODE		0x02	/* set Auto or Manual */
+#define CAT6_AWB_MANUAL		0x03	/* set Manual(preset) value */
+
+#define AWB_LOCK		I2C_REG(CAT_WB, CAT6_AWB_LOCK, 1)
+#define REG_AWB_UNLOCK		0x00
+#define REG_AWB_LOCK		0x01
+
+#define AWB_MODE		I2C_REG(CAT_WB, CAT6_AWB_MODE, 1)
+#define REG_AWB_AUTO		0x01	/* AWB off */
+#define REG_AWB_PRESET		0x02	/* AWB preset */
+
+#define AWB_MANUAL		I2C_REG(CAT_WB, CAT6_AWB_MANUAL, 1)
+#define REG_AWB_INCANDESCENT	0x01
+#define REG_AWB_FLUORESCENT_1	0x02
+#define REG_AWB_FLUORESCENT_2	0x03
+#define REG_AWB_DAYLIGHT	0x04
+#define REG_AWB_CLOUDY		0x05
+#define REG_AWB_SHADE		0x06
+#define REG_AWB_HORIZON		0x07
+#define REG_AWB_LEDLIGHT	0x09
+
+/*
+ * Category 7 - EXIF information
+ */
+#define CAT7_INFO_EXPTIME_NU	0x00
+#define CAT7_INFO_EXPTIME_DE	0x04
+#define CAT7_INFO_TV_NU		0x08
+#define CAT7_INFO_TV_DE		0x0c
+#define CAT7_INFO_AV_NU		0x10
+#define CAT7_INFO_AV_DE		0x14
+#define CAT7_INFO_BV_NU		0x18
+#define CAT7_INFO_BV_DE		0x1c
+#define CAT7_INFO_EBV_NU	0x20
+#define CAT7_INFO_EBV_DE	0x24
+#define CAT7_INFO_ISO		0x28
+#define CAT7_INFO_FLASH		0x2a
+#define CAT7_INFO_SDR		0x2c
+#define CAT7_INFO_QVAL		0x2e
+
+#define EXIF_INFO_EXPTIME_NU	I2C_REG(CAT_EXIF, CAT7_INFO_EXPTIME_NU, 4)
+#define EXIF_INFO_EXPTIME_DE	I2C_REG(CAT_EXIF, CAT7_INFO_EXPTIME_DE, 4)
+#define EXIF_INFO_TV_NU		I2C_REG(CAT_EXIF, CAT7_INFO_TV_NU, 4)
+#define EXIF_INFO_TV_DE		I2C_REG(CAT_EXIF, CAT7_INFO_TV_DE, 4)
+#define EXIF_INFO_AV_NU		I2C_REG(CAT_EXIF, CAT7_INFO_AV_NU, 4)
+#define EXIF_INFO_AV_DE		I2C_REG(CAT_EXIF, CAT7_INFO_AV_DE, 4)
+#define EXIF_INFO_BV_NU		I2C_REG(CAT_EXIF, CAT7_INFO_BV_NU, 4)
+#define EXIF_INFO_BV_DE		I2C_REG(CAT_EXIF, CAT7_INFO_BV_DE, 4)
+#define EXIF_INFO_EBV_NU	I2C_REG(CAT_EXIF, CAT7_INFO_EBV_NU, 4)
+#define EXIF_INFO_EBV_DE	I2C_REG(CAT_EXIF, CAT7_INFO_EBV_DE, 4)
+#define EXIF_INFO_ISO		I2C_REG(CAT_EXIF, CAT7_INFO_ISO, 2)
+#define EXIF_INFO_FLASH		I2C_REG(CAT_EXIF, CAT7_INFO_FLASH, 2)
+#define EXIF_INFO_SDR		I2C_REG(CAT_EXIF, CAT7_INFO_SDR, 2)
+#define EXIF_INFO_QVAL		I2C_REG(CAT_EXIF, CAT7_INFO_QVAL, 2)
+
+/*
+ * Category 9 - Face Detection
+ */
+#define CAT9_FD_CTL		0x00
+
+#define FD_CTL			I2C_REG(CAT_FD, CAT9_FD_CTL, 1)
+#define BIT_FD_EN		0
+#define BIT_FD_DRAW_FACE_FRAME	4
+#define BIT_FD_DRAW_SMILE_LVL	6
+#define REG_FD(shift)		(1 << shift)
+#define REG_FD_OFF		0x0
+
+/*
+ * Category A - Lens Parameter
+ */
+#define CATA_AF_MODE		0x01
+#define CATA_AF_EXECUTE		0x02
+#define CATA_AF_STATUS		0x03
+#define CATA_AF_VERSION		0x0a
+
+#define AF_MODE			I2C_REG(CAT_LENS, CATA_AF_MODE, 1)
+#define REG_AF_NORMAL		0x00	/* Normal AF, one time */
+#define REG_AF_MACRO		0x01	/* Macro AF, one time */
+#define REG_AF_POWEROFF		0x07
+
+#define AF_EXECUTE		I2C_REG(CAT_LENS, CATA_AF_EXECUTE, 1)
+#define REG_AF_STOP		0x00
+#define REG_AF_EXE_AUTO		0x01
+#define REG_AF_EXE_CAF		0x02
+
+#define AF_STATUS		I2C_REG(CAT_LENS, CATA_AF_STATUS, 1)
+#define REG_AF_FAIL		0x00
+#define REG_AF_SUCCESS		0x02
+#define REG_AF_IDLE		0x04
+#define REG_AF_BUSY		0x05
+
+#define AF_VERSION		I2C_REG(CAT_LENS, CATA_AF_VERSION, 1)
+
+/*
+ * Category B - CAPTURE Parameter
+ */
+#define CATB_YUVOUT_MAIN	0x00
+#define CATB_MAIN_IMAGE_SIZE	0x01
+#define CATB_MCC_MODE		0x1d
+#define CATB_WDR_EN		0x2c
+#define CATB_LIGHT_CTRL		0x40
+#define CATB_FLASH_CTRL		0x41
+
+#define CAPP_YUVOUT_MAIN	I2C_REG(CAT_CAPT_PARM, CATB_YUVOUT_MAIN, 1)
+#define REG_YUV422		0x00
+#define REG_BAYER10		0x05
+#define REG_BAYER8		0x06
+#define REG_JPEG		0x10
+
+#define CAPP_MAIN_IMAGE_SIZE	I2C_REG(CAT_CAPT_PARM, CATB_MAIN_IMAGE_SIZE, 1)
+
+#define CAPP_MCC_MODE		I2C_REG(CAT_CAPT_PARM, CATB_MCC_MODE, 1)
+#define REG_MCC_OFF		0x00
+#define REG_MCC_NORMAL		0x01
+
+#define CAPP_WDR_EN		I2C_REG(CAT_CAPT_PARM, CATB_WDR_EN, 1)
+#define REG_WDR_OFF		0x00
+#define REG_WDR_ON		0x01
+#define REG_WDR_AUTO		0x02
+
+#define CAPP_LIGHT_CTRL		I2C_REG(CAT_CAPT_PARM, CATB_LIGHT_CTRL, 1)
+#define REG_LIGHT_OFF		0x00
+#define REG_LIGHT_ON		0x01
+#define REG_LIGHT_AUTO		0x02
+
+#define CAPP_FLASH_CTRL		I2C_REG(CAT_CAPT_PARM, CATB_FLASH_CTRL, 1)
+#define REG_FLASH_OFF		0x00
+#define REG_FLASH_ON		0x01
+#define REG_FLASH_AUTO		0x02
+
+/*
+ * Category C - CAPTURE Control
+ */
+#define CATC_CAP_MODE		0x00
+#define CATC_CAP_SEL_FRAME	0x06	/* It determines Single or Multi */
+#define CATC_CAP_START		0x09
+#define CATC_CAP_IMAGE_SIZE	0x0d
+#define CATC_CAP_THUMB_SIZE	0x11
+
+#define CAPC_MODE		I2C_REG(CAT_CAPT_CTRL, CATC_CAP_MODE, 1)
+#define REG_CAP_NONE		0x00
+#define REG_CAP_ANTI_SHAKE	0x02
+
+#define CAPC_SEL_FRAME		I2C_REG(CAT_CAPT_CTRL, CATC_CAP_SEL_FRAME, 1)
+
+#define CAPC_START		I2C_REG(CAT_CAPT_CTRL, CATC_CAP_START, 1)
+#define REG_CAP_START_MAIN	0x01
+#define REG_CAP_START_THUMB	0x03
+
+#define CAPC_IMAGE_SIZE		I2C_REG(CAT_CAPT_CTRL, CATC_CAP_IMAGE_SIZE, 1)
+#define CAPC_THUMB_SIZE		I2C_REG(CAT_CAPT_CTRL, CATC_CAP_THUMB_SIZE, 1)
+
+/*
+ * Category F - Flash
+ *
+ * This mode provides functions about internal flash stuff and system startup.
+ */
+#define CATF_CAM_START		0x12	/* It starts internal ARM core booting
+					 * after power-up */
+
+#define FLASH_CAM_START		I2C_REG(CAT_FLASH, CATF_CAM_START, 1)
+#define REG_START_ARM_BOOT	0x01
+
+#endif	/* M5MOLS_REG_H */

drivers/media/video/uvc/Makefile

@@ -1,3 +1,6 @@
 uvcvideo-objs  := uvc_driver.o uvc_queue.o uvc_v4l2.o uvc_video.o uvc_ctrl.o \
 		  uvc_status.o uvc_isight.o
+ifeq ($(CONFIG_MEDIA_CONTROLLER),y)
+uvcvideo-objs  += uvc_entity.o
+endif
 obj-$(CONFIG_USB_VIDEO_CLASS) += uvcvideo.o

drivers/media/video/uvc/uvc_driver.c

@@ -248,7 +248,7 @@ uint32_t uvc_fraction_to_interval(uint32_t numerator, uint32_t denominator)
  * Terminal and unit management
  */
 
-static struct uvc_entity *uvc_entity_by_id(struct uvc_device *dev, int id)
+struct uvc_entity *uvc_entity_by_id(struct uvc_device *dev, int id)
 {
 	struct uvc_entity *entity;
 
@@ -795,9 +795,12 @@ static struct uvc_entity *uvc_alloc_entity(u16 type, u8 id,
 	struct uvc_entity *entity;
 	unsigned int num_inputs;
 	unsigned int size;
+	unsigned int i;
 
+	extra_size = ALIGN(extra_size, sizeof(*entity->pads));
 	num_inputs = (type & UVC_TERM_OUTPUT) ? num_pads : num_pads - 1;
-	size = sizeof(*entity) + extra_size + num_inputs;
+	size = sizeof(*entity) + extra_size + sizeof(*entity->pads) * num_pads
+	     + num_inputs;
 	entity = kzalloc(size, GFP_KERNEL);
 	if (entity == NULL)
 		return NULL;
@@ -805,8 +808,17 @@ static struct uvc_entity *uvc_alloc_entity(u16 type, u8 id,
 	entity->id = id;
 	entity->type = type;
 
+	entity->num_links = 0;
+	entity->num_pads = num_pads;
+	entity->pads = ((void *)(entity + 1)) + extra_size;
+
+	for (i = 0; i < num_inputs; ++i)
+		entity->pads[i].flags = MEDIA_PAD_FL_SINK;
+	if (!UVC_ENTITY_IS_OTERM(entity))
+		entity->pads[num_pads-1].flags = MEDIA_PAD_FL_SOURCE;
+
 	entity->bNrInPins = num_inputs;
-	entity->baSourceID = ((__u8 *)entity) + sizeof(*entity) + extra_size;
+	entity->baSourceID = (__u8 *)(&entity->pads[num_pads]);
 
 	return entity;
 }
@@ -1585,6 +1597,13 @@ static void uvc_delete(struct uvc_device *dev)
 	uvc_status_cleanup(dev);
 	uvc_ctrl_cleanup_device(dev);
 
+	if (dev->vdev.dev)
+		v4l2_device_unregister(&dev->vdev);
+#ifdef CONFIG_MEDIA_CONTROLLER
+	if (media_devnode_is_registered(&dev->mdev.devnode))
+		media_device_unregister(&dev->mdev);
+#endif
+
 	list_for_each_safe(p, n, &dev->chains) {
 		struct uvc_video_chain *chain;
 		chain = list_entry(p, struct uvc_video_chain, list);
@@ -1594,6 +1613,13 @@ static void uvc_delete(struct uvc_device *dev)
 	list_for_each_safe(p, n, &dev->entities) {
 		struct uvc_entity *entity;
 		entity = list_entry(p, struct uvc_entity, list);
+#ifdef CONFIG_MEDIA_CONTROLLER
+		uvc_mc_cleanup_entity(entity);
+#endif
+		if (entity->vdev) {
+			video_device_release(entity->vdev);
+			entity->vdev = NULL;
+		}
 		kfree(entity);
 	}
 
@@ -1616,8 +1642,6 @@ static void uvc_release(struct video_device *vdev)
 	struct uvc_streaming *stream = video_get_drvdata(vdev);
 	struct uvc_device *dev = stream->dev;
 
-	video_device_release(vdev);
-
 	/* Decrement the registered streams count and delete the device when it
 	 * reaches zero.
 	 */
@@ -1682,7 +1706,7 @@ static int uvc_register_video(struct uvc_device *dev,
 	 * unregistered before the reference is released, so we don't need to
 	 * get another one.
 	 */
-	vdev->parent = &dev->intf->dev;
+	vdev->v4l2_dev = &dev->vdev;
 	vdev->fops = &uvc_fops;
 	vdev->release = uvc_release;
 	strlcpy(vdev->name, dev->name, sizeof vdev->name);
@@ -1731,6 +1755,8 @@ static int uvc_register_terms(struct uvc_device *dev,
 		ret = uvc_register_video(dev, stream);
 		if (ret < 0)
 			return ret;
+
+		term->vdev = stream->vdev;
 	}
 
 	return 0;
@@ -1745,6 +1771,14 @@ static int uvc_register_chains(struct uvc_device *dev)
 		ret = uvc_register_terms(dev, chain);
 		if (ret < 0)
 			return ret;
+
+#ifdef CONFIG_MEDIA_CONTROLLER
+		ret = uvc_mc_register_entities(chain);
+		if (ret < 0) {
+			uvc_printk(KERN_INFO, "Failed to register entites "
+				"(%d).\n", ret);
+		}
+#endif
 	}
 
 	return 0;
@@ -1814,6 +1848,24 @@ static int uvc_probe(struct usb_interface *intf,
 			"linux-uvc-devel mailing list.\n");
 	}
 
+	/* Register the media and V4L2 devices. */
+#ifdef CONFIG_MEDIA_CONTROLLER
+	dev->mdev.dev = &intf->dev;
+	strlcpy(dev->mdev.model, dev->name, sizeof(dev->mdev.model));
+	if (udev->serial)
+		strlcpy(dev->mdev.serial, udev->serial,
+			sizeof(dev->mdev.serial));
+	strcpy(dev->mdev.bus_info, udev->devpath);
+	dev->mdev.hw_revision = le16_to_cpu(udev->descriptor.bcdDevice);
+	dev->mdev.driver_version = DRIVER_VERSION_NUMBER;
+	if (media_device_register(&dev->mdev) < 0)
+		goto error;
+
+	dev->vdev.mdev = &dev->mdev;
+#endif
+	if (v4l2_device_register(&intf->dev, &dev->vdev) < 0)
+		goto error;
+
 	/* Initialize controls. */
 	if (uvc_ctrl_init_device(dev) < 0)
 		goto error;
@@ -1822,7 +1874,7 @@ static int uvc_probe(struct usb_interface *intf,
 	if (uvc_scan_device(dev) < 0)
 		goto error;
 
-	/* Register video devices. */
+	/* Register video device nodes. */
 	if (uvc_register_chains(dev) < 0)
 		goto error;
 

drivers/media/video/uvc/uvc_entity.c

@@ -0,0 +1,118 @@
+/*
+ *      uvc_entity.c  --  USB Video Class driver
+ *
+ *      Copyright (C) 2005-2011
+ *          Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ *
+ *      This program is free software; you can redistribute it and/or modify
+ *      it under the terms of the GNU General Public License as published by
+ *      the Free Software Foundation; either version 2 of the License, or
+ *      (at your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/videodev2.h>
+
+#include <media/v4l2-common.h>
+
+#include "uvcvideo.h"
+
+/* ------------------------------------------------------------------------
+ * Video subdevices registration and unregistration
+ */
+
+static int uvc_mc_register_entity(struct uvc_video_chain *chain,
+	struct uvc_entity *entity)
+{
+	const u32 flags = MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE;
+	struct uvc_entity *remote;
+	unsigned int i;
+	u8 remote_pad;
+	int ret;
+
+	for (i = 0; i < entity->num_pads; ++i) {
+		struct media_entity *source;
+		struct media_entity *sink;
+
+		if (!(entity->pads[i].flags & MEDIA_PAD_FL_SINK))
+			continue;
+
+		remote = uvc_entity_by_id(chain->dev, entity->baSourceID[i]);
+		if (remote == NULL)
+			return -EINVAL;
+
+		source = (UVC_ENTITY_TYPE(remote) == UVC_TT_STREAMING)
+		       ? &remote->vdev->entity : &remote->subdev.entity;
+		sink = (UVC_ENTITY_TYPE(entity) == UVC_TT_STREAMING)
+		     ? &entity->vdev->entity : &entity->subdev.entity;
+
+		remote_pad = remote->num_pads - 1;
+		ret = media_entity_create_link(source, remote_pad,
+					       sink, i, flags);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (UVC_ENTITY_TYPE(entity) != UVC_TT_STREAMING)
+		ret = v4l2_device_register_subdev(&chain->dev->vdev,
+						  &entity->subdev);
+
+	return ret;
+}
+
+static struct v4l2_subdev_ops uvc_subdev_ops = {
+};
+
+void uvc_mc_cleanup_entity(struct uvc_entity *entity)
+{
+	if (UVC_ENTITY_TYPE(entity) != UVC_TT_STREAMING)
+		media_entity_cleanup(&entity->subdev.entity);
+	else if (entity->vdev != NULL)
+		media_entity_cleanup(&entity->vdev->entity);
+}
+
+static int uvc_mc_init_entity(struct uvc_entity *entity)
+{
+	int ret;
+
+	if (UVC_ENTITY_TYPE(entity) != UVC_TT_STREAMING) {
+		v4l2_subdev_init(&entity->subdev, &uvc_subdev_ops);
+		strlcpy(entity->subdev.name, entity->name,
+			sizeof(entity->subdev.name));
+
+		ret = media_entity_init(&entity->subdev.entity,
+					entity->num_pads, entity->pads, 0);
+	} else
+		ret = media_entity_init(&entity->vdev->entity,
+					entity->num_pads, entity->pads, 0);
+
+	return ret;
+}
+
+int uvc_mc_register_entities(struct uvc_video_chain *chain)
+{
+	struct uvc_entity *entity;
+	int ret;
+
+	list_for_each_entry(entity, &chain->entities, chain) {
+		ret = uvc_mc_init_entity(entity);
+		if (ret < 0) {
+			uvc_printk(KERN_INFO, "Failed to initialize entity for "
+				   "entity %u\n", entity->id);
+			return ret;
+		}
+	}
+
+	list_for_each_entry(entity, &chain->entities, chain) {
+		ret = uvc_mc_register_entity(chain, entity);
+		if (ret < 0) {
+			uvc_printk(KERN_INFO, "Failed to register entity for "
+				   "entity %u\n", entity->id);
+			return ret;
+		}
+	}
+
+	return 0;
+}

drivers/media/video/uvc/uvcvideo.h

@@ -98,8 +98,11 @@ struct uvc_xu_control {
 #ifdef __KERNEL__
 
 #include <linux/poll.h>
+#include <linux/usb.h>
 #include <linux/usb/video.h>
 #include <linux/uvcvideo.h>
+#include <media/media-device.h>
+#include <media/v4l2-device.h>
 
 /* --------------------------------------------------------------------------
  * UVC constants
@@ -301,6 +304,13 @@ struct uvc_entity {
 	__u16 type;
 	char name[64];
 
+	/* Media controller-related fields. */
+	struct video_device *vdev;
+	struct v4l2_subdev subdev;
+	unsigned int num_pads;
+	unsigned int num_links;
+	struct media_pad *pads;
+
 	union {
 		struct {
 			__u16 wObjectiveFocalLengthMin;
@@ -504,6 +514,10 @@ struct uvc_device {
 	atomic_t nmappings;
 
 	/* Video control interface */
+#ifdef CONFIG_MEDIA_CONTROLLER
+	struct media_device mdev;
+#endif
+	struct v4l2_device vdev;
 	__u16 uvc_version;
 	__u32 clock_frequency;
 
@@ -583,6 +597,8 @@ extern unsigned int uvc_timeout_param;
 /* Core driver */
 extern struct uvc_driver uvc_driver;
 
+extern struct uvc_entity *uvc_entity_by_id(struct uvc_device *dev, int id);
+
 /* Video buffers queue management. */
 extern void uvc_queue_init(struct uvc_video_queue *queue,
 		enum v4l2_buf_type type, int drop_corrupted);
@@ -616,6 +632,10 @@ static inline int uvc_queue_streaming(struct uvc_video_queue *queue)
 /* V4L2 interface */
 extern const struct v4l2_file_operations uvc_fops;
 
+/* Media controller */
+extern int uvc_mc_register_entities(struct uvc_video_chain *chain);
+extern void uvc_mc_cleanup_entity(struct uvc_entity *entity);
+
 /* Video */
 extern int uvc_video_init(struct uvc_streaming *stream);
 extern int uvc_video_suspend(struct uvc_streaming *stream);

include/media/m5mols.h

@@ -0,0 +1,35 @@
+/*
+ * Driver header for M-5MOLS 8M Pixel camera sensor with ISP
+ *
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ * Author: HeungJun Kim, riverful.kim@samsung.com
+ *
+ * Copyright (C) 2009 Samsung Electronics Co., Ltd.
+ * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef MEDIA_M5MOLS_H
+#define MEDIA_M5MOLS_H
+
+/**
+ * struct m5mols_platform_data - platform data for M-5MOLS driver
+ * @irq:	GPIO getting the irq pin of M-5MOLS
+ * @gpio_reset:	GPIO driving the reset pin of M-5MOLS
+ * @reset_polarity: active state for gpio_rst pin, 0 or 1
+ * @set_power:	an additional callback to the board setup code
+ *		to be called after enabling and before disabling
+ *		the sensor's supply regulators
+ */
+struct m5mols_platform_data {
+	int irq;
+	int gpio_reset;
+	u8 reset_polarity;
+	int (*set_power)(struct device *dev, int on);
+};
+
+#endif	/* MEDIA_M5MOLS_H */

include/media/videobuf-dvb.h

@@ -4,6 +4,9 @@
 #include <dvb_net.h>
 #include <dvb_frontend.h>
 
+#ifndef _VIDEOBUF_DVB_H_
+#define	_VIDEOBUF_DVB_H_
+
 struct videobuf_dvb {
 	/* filling that the job of the driver */
 	char                       *name;
@@ -54,6 +57,7 @@ void videobuf_dvb_dealloc_frontends(struct videobuf_dvb_frontends *f);
 struct videobuf_dvb_frontend * videobuf_dvb_get_frontend(struct videobuf_dvb_frontends *f, int id);
 int videobuf_dvb_find_frontend(struct videobuf_dvb_frontends *f, struct dvb_frontend *p);
 
+#endif			/* _VIDEOBUF_DVB_H_ */
 
 /*
  * Local variables: