Merge branch 'merge'

Documentation/dvb/get_dvb_firmware

@@ -259,9 +259,9 @@ sub dibusb {
 }
 
 sub nxt2002 {
-    my $sourcefile = "Broadband4PC_4_2_11.zip";
+    my $sourcefile = "Technisat_DVB-PC_4_4_COMPACT.zip";
     my $url = "http://www.bbti.us/download/windows/$sourcefile";
-    my $hash = "c6d2ea47a8f456d887ada0cfb718ff2a";
+    my $hash = "476befae8c7c1bb9648954060b1eec1f";
     my $outfile = "dvb-fe-nxt2002.fw";
     my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
 
@@ -269,8 +269,8 @@ sub nxt2002 {
 
     wgetfile($sourcefile, $url);
     unzip($sourcefile, $tmpdir);
-    verify("$tmpdir/SkyNETU.sys", $hash);
-    extract("$tmpdir/SkyNETU.sys", 375832, 5908, $outfile);
+    verify("$tmpdir/SkyNET.sys", $hash);
+    extract("$tmpdir/SkyNET.sys", 331624, 5908, $outfile);
 
     $outfile;
 }

Documentation/firmware_class/README

@@ -105,20 +105,3 @@
    on the setup, so I think that the choice on what firmware to make
    persistent should be left to userspace.
 
- - Why register_firmware()+__init can be useful:
- 	- For boot devices needing firmware.
-	- To make the transition easier:
-		The firmware can be declared __init and register_firmware()
-		called on module_init. Then the firmware is warranted to be
-		there even if "firmware hotplug userspace" is not there yet or
-		it doesn't yet provide the needed firmware.
-		Once the firmware is widely available in userspace, it can be
-		removed from the kernel. Or made optional (CONFIG_.*_FIRMWARE).
-
-	In either case, if firmware hotplug support is there, it can move the
-	firmware out of kernel memory into the real filesystem for later
-	usage.
-
-	Note: If persistence is implemented on top of initramfs,
-	register_firmware() may not be appropriate.
-

Documentation/firmware_class/firmware_sample_driver.c

@@ -5,8 +5,6 @@
  *
  * Sample code on how to use request_firmware() from drivers.
  *
- * Note that register_firmware() is currently useless.
- *
  */
 
 #include <linux/module.h>
@@ -17,11 +15,6 @@
 
 #include "linux/firmware.h"
 
-#define WE_CAN_NEED_FIRMWARE_BEFORE_USERSPACE_IS_AVAILABLE
-#ifdef WE_CAN_NEED_FIRMWARE_BEFORE_USERSPACE_IS_AVAILABLE
-char __init inkernel_firmware[] = "let's say that this is firmware\n";
-#endif
-
 static struct device ghost_device = {
 	.bus_id    = "ghost0",
 };
@@ -104,10 +97,6 @@ static void sample_probe_async(void)
 
 static int sample_init(void)
 {
-#ifdef WE_CAN_NEED_FIRMWARE_BEFORE_USERSPACE_IS_AVAILABLE
-	register_firmware("sample_driver_fw", inkernel_firmware,
-			  sizeof(inkernel_firmware));
-#endif
 	device_initialize(&ghost_device);
 	/* since there is no real hardware insertion I just call the
 	 * sample probe functions here */

Documentation/watchdog/watchdog-api.txt

@@ -36,6 +36,9 @@ timeout or margin.  The simplest way to ping the watchdog is to write
 some data to the device.  So a very simple watchdog daemon would look
 like this:
 
+#include <stdlib.h>
+#include <fcntl.h>
+
 int main(int argc, const char *argv[]) {
 	int fd=open("/dev/watchdog",O_WRONLY);
 	if (fd==-1) {

MAINTAINERS

@@ -40,11 +40,20 @@ trivial patch so apply some common sense.
 	PLEASE document known bugs. If it doesn't work for everything
 	or does something very odd once a month document it.
 
+	PLEASE remember that submissions must be made under the terms
+	of the OSDL certificate of contribution
+	(http://www.osdl.org/newsroom/press_releases/2004/2004_05_24_dco.html)
+	and should include a Signed-off-by: line.
+
 6.	Make sure you have the right to send any changes you make. If you
 	do changes at work you may find your employer owns the patch
 	not you.
 
-7.	Happy hacking.
+7.	When sending security related changes or reports to a maintainer
+	please Cc: security@kernel.org, especially if the maintainer
+	does not respond.
+
+8.	Happy hacking.
 
  		-----------------------------------
 
@@ -556,7 +565,7 @@ BROADBAND PROCESSOR ARCHITECTURE
 P:	Arnd Bergmann
 M:	arnd@arndb.de
 L:	linuxppc-dev@ozlabs.org
-W:	http://linuxppc64.org
+W:	http://www.penguinppc.org/ppc64/
 S:	Supported
 
 BTTV VIDEO4LINUX DRIVER
@@ -969,7 +978,7 @@ S:	Maintained
 EXT3 FILE SYSTEM
 P:	Stephen Tweedie, Andrew Morton
 M:	sct@redhat.com, akpm@osdl.org, adilger@clusterfs.com
-L:	ext3-users@redhat.com
+L:	ext2-devel@lists.sourceforge.net
 S:	Maintained
 
 F71805F HARDWARE MONITORING DRIVER
@@ -1530,12 +1539,28 @@ W:	http://jfs.sourceforge.net/
 T:	git kernel.org:/pub/scm/linux/kernel/git/shaggy/jfs-2.6.git
 S:	Supported
 
+JOURNALLING LAYER FOR BLOCK DEVICS (JBD)
+P:	Stephen Tweedie, Andrew Morton
+M:	sct@redhat.com, akpm@osdl.org
+L:	ext2-devel@lists.sourceforge.net
+S:	Maintained
+
 KCONFIG
 P:	Roman Zippel
 M:	zippel@linux-m68k.org
 L:	kbuild-devel@lists.sourceforge.net
 S:	Maintained
 
+KDUMP
+P:	Vivek Goyal
+M:	vgoyal@in.ibm.com
+P:	Haren Myneni
+M:	hbabu@us.ibm.com
+L:	fastboot@lists.osdl.org
+L:	linux-kernel@vger.kernel.org
+W:	http://lse.sourceforge.net/kdump/
+S:	Maintained
+
 KERNEL AUTOMOUNTER (AUTOFS)
 P:	H. Peter Anvin
 M:	hpa@zytor.com
@@ -1691,7 +1716,7 @@ M:	paulus@au.ibm.com
 P:	Anton Blanchard
 M:	anton@samba.org
 M:	anton@au.ibm.com
-W:	http://linuxppc64.org
+W:	http://www.penguinppc.org/ppc64/
 L:	linuxppc-dev@ozlabs.org
 S:	Supported
 
@@ -1874,6 +1899,12 @@ M:	James.Bottomley@HansenPartnership.com
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 
+NETEM NETWORK EMULATOR
+P:	Stephen Hemminger
+M:	shemminger@osdl.org
+L:	netem@osdl.org
+S:	Maintained
+
 NETFILTER/IPTABLES/IPCHAINS
 P:	Rusty Russell
 P:	Marc Boucher

Makefile

@@ -1,8 +1,8 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 17
-EXTRAVERSION =-rc4
-NAME=Sliding Snow Leopard
+EXTRAVERSION =-rc5
+NAME=Lordi Rules
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"

arch/arm/mach-pxa/mainstone.c

@@ -95,7 +95,10 @@ static void __init mainstone_init_irq(void)
 	for(irq = MAINSTONE_IRQ(0); irq <= MAINSTONE_IRQ(15); irq++) {
 		set_irq_chip(irq, &mainstone_irq_chip);
 		set_irq_handler(irq, do_level_IRQ);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+		if (irq == MAINSTONE_IRQ(10) || irq == MAINSTONE_IRQ(14))
+			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE | IRQF_NOAUTOEN);
+		else
+			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 	}
 	set_irq_flags(MAINSTONE_IRQ(8), 0);
 	set_irq_flags(MAINSTONE_IRQ(12), 0);

arch/arm/mach-s3c2410/sleep.S

@@ -59,8 +59,7 @@ ENTRY(s3c2410_cpu_suspend)
 	mrc	p15, 0, r5, c13, c0, 0	@ PID
 	mrc	p15, 0, r6, c3, c0, 0	@ Domain ID
 	mrc	p15, 0, r7, c2, c0, 0	@ translation table base address
-	mrc	p15, 0, r8, c2, c0, 0	@ auxiliary control register
-	mrc	p15, 0, r9, c1, c0, 0	@ control register
+	mrc	p15, 0, r8, c1, c0, 0	@ control register
 
 	stmia	r0, { r4 - r13 }
 
@@ -165,7 +164,6 @@ ENTRY(s3c2410_cpu_resume)
 	mcr	p15, 0, r5, c13, c0, 0		@ PID
 	mcr	p15, 0, r6, c3, c0, 0		@ Domain ID
 	mcr	p15, 0, r7, c2, c0, 0		@ translation table base
-	mcr	p15, 0, r8, c1, c1, 0		@ auxilliary control
 
 #ifdef CONFIG_DEBUG_RESUME
 	mov	r3, #'R'
@@ -173,7 +171,7 @@ ENTRY(s3c2410_cpu_resume)
 #endif
 
 	ldr	r2, =resume_with_mmu
-	mcr	p15, 0, r9, c1, c0, 0		@ turn on MMU, etc
+	mcr	p15, 0, r8, c1, c0, 0		@ turn on MMU, etc
 	nop					@ second-to-last before mmu
 	mov	pc, r2				@ go back to virtual address
 

arch/arm/mm/mm-armv.c

@@ -376,7 +376,7 @@ void __init build_mem_type_table(void)
 		ecc_mask = 0;
 	}
 
-	if (cpu_arch <= CPU_ARCH_ARMv5TEJ) {
+	if (cpu_arch <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale()) {
 		for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
 			if (mem_types[i].prot_l1)
 				mem_types[i].prot_l1 |= PMD_BIT4;
@@ -631,7 +631,7 @@ void setup_mm_for_reboot(char mode)
 		pgd = init_mm.pgd;
 
 	base_pmdval = PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | PMD_TYPE_SECT;
-	if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ)
+	if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale())
 		base_pmdval |= PMD_BIT4;
 
 	for (i = 0; i < FIRST_USER_PGD_NR + USER_PTRS_PER_PGD; i++, pgd++) {

arch/arm/mm/proc-xsc3.S

@@ -427,12 +427,13 @@ __xsc3_setup:
 #endif
 	mcr	p15, 0, r0, c1, c0, 1		@ set auxiliary control reg
 	mrc	p15, 0, r0, c1, c0, 0		@ get control register
-	bic	r0, r0, #0x0200			@ .... ..R. .... ....
 	bic	r0, r0, #0x0002			@ .... .... .... ..A.
 	orr	r0, r0, #0x0005			@ .... .... .... .C.M
 #if BTB_ENABLE
+	bic	r0, r0, #0x0200			@ .... ..R. .... ....
 	orr	r0, r0, #0x3900			@ ..VI Z..S .... ....
 #else
+	bic	r0, r0, #0x0a00			@ .... Z.R. .... ....
 	orr	r0, r0, #0x3100			@ ..VI ...S .... ....
 #endif
 #if L2_CACHE_ENABLE

arch/i386/kernel/acpi/boot.c

@@ -1066,14 +1066,6 @@ static struct dmi_system_id __initdata acpi_dmi_table[] = {
 		     DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"),
 		     },
 	 },
-	{
-	 .callback = disable_acpi_pci,
-	 .ident = "HP xw9300",
-	 .matches = {
-		    DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
-		    DMI_MATCH(DMI_PRODUCT_NAME, "HP xw9300 Workstation"),
-		    },
-	},
 	{}
 };
 

arch/i386/kernel/apic.c

@@ -1341,6 +1341,14 @@ int __init APIC_init_uniprocessor (void)
 
 	connect_bsp_APIC();
 
+	/*
+	 * Hack: In case of kdump, after a crash, kernel might be booting
+	 * on a cpu with non-zero lapic id. But boot_cpu_physical_apicid
+	 * might be zero if read from MP tables. Get it from LAPIC.
+	 */
+#ifdef CONFIG_CRASH_DUMP
+	boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
+#endif
 	phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid);
 
 	setup_local_APIC();

arch/i386/kernel/syscall_table.S

@@ -315,3 +315,4 @@ ENTRY(sys_call_table)
 	.long sys_splice
 	.long sys_sync_file_range
 	.long sys_tee			/* 315 */
+	.long sys_vmsplice

arch/i386/kernel/traps.c

@@ -130,9 +130,8 @@ static inline int print_addr_and_symbol(unsigned long addr, char *log_lvl,
 	print_symbol("%s", addr);
 
 	printed = (printed + 1) % CONFIG_STACK_BACKTRACE_COLS;
-
 	if (printed)
-		printk("  ");
+		printk(" ");
 	else
 		printk("\n");
 
@@ -212,7 +211,6 @@ static void show_stack_log_lvl(struct task_struct *task, unsigned long *esp,
 	}
 
 	stack = esp;
-	printk(log_lvl);
 	for(i = 0; i < kstack_depth_to_print; i++) {
 		if (kstack_end(stack))
 			break;

arch/i386/mach-generic/probe.c

@@ -93,9 +93,11 @@ int __init mps_oem_check(struct mp_config_table *mpc, char *oem, char *productid
 	int i;
 	for (i = 0; apic_probe[i]; ++i) { 
 		if (apic_probe[i]->mps_oem_check(mpc,oem,productid)) { 
-			genapic = apic_probe[i];
-			printk(KERN_INFO "Switched to APIC driver `%s'.\n", 
-			       genapic->name);
+			if (!cmdline_apic) {
+				genapic = apic_probe[i];
+				printk(KERN_INFO "Switched to APIC driver `%s'.\n",
+				       genapic->name);
+			}
 			return 1;
 		} 
 	} 
@@ -107,9 +109,11 @@ int __init acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 	int i;
 	for (i = 0; apic_probe[i]; ++i) { 
 		if (apic_probe[i]->acpi_madt_oem_check(oem_id, oem_table_id)) { 
-			genapic = apic_probe[i];
-			printk(KERN_INFO "Switched to APIC driver `%s'.\n", 
-			       genapic->name);
+			if (!cmdline_apic) {
+				genapic = apic_probe[i];
+				printk(KERN_INFO "Switched to APIC driver `%s'.\n",
+				       genapic->name);
+			}
 			return 1;
 		} 
 	} 

arch/i386/mm/init.c

@@ -651,7 +651,7 @@ void __init mem_init(void)
  * Specifically, in the case of x86, we will always add
  * memory to the highmem for now.
  */
-#ifdef CONFIG_HOTPLUG_MEMORY
+#ifdef CONFIG_MEMORY_HOTPLUG
 #ifndef CONFIG_NEED_MULTIPLE_NODES
 int add_memory(u64 start, u64 size)
 {

arch/i386/power/cpu.c

@@ -92,7 +92,7 @@ void __restore_processor_state(struct saved_context *ctxt)
 	write_cr4(ctxt->cr4);
 	write_cr3(ctxt->cr3);
 	write_cr2(ctxt->cr2);
-	write_cr2(ctxt->cr0);
+	write_cr0(ctxt->cr0);
 
 	/*
 	 * now restore the descriptor tables to their proper values

arch/mips/Kconfig

@@ -13,7 +13,7 @@ choice
 	default SGI_IP22
 
 config MIPS_MTX1
-	bool "Support for 4G Systems MTX-1 board"
+	bool "4G Systems MTX-1 board"
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select SOC_AU1500
@@ -120,7 +120,7 @@ config MIPS_MIRAGE
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config MIPS_COBALT
-	bool "Support for Cobalt Server"
+	bool "Cobalt Server"
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select I8259
@@ -132,7 +132,7 @@ config MIPS_COBALT
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config MACH_DECSTATION
-	bool "Support for DECstations"
+	bool "DECstations"
 	select BOOT_ELF32
 	select DMA_NONCOHERENT
 	select EARLY_PRINTK
@@ -158,7 +158,7 @@ config MACH_DECSTATION
 	  otherwise choose R3000.
 
 config MIPS_EV64120
-	bool "Support for Galileo EV64120 Evaluation board (EXPERIMENTAL)"
+	bool "Galileo EV64120 Evaluation board (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
@@ -175,7 +175,7 @@ config MIPS_EV64120
 	  kernel for this platform.
 
 config MIPS_EV96100
-	bool "Support for Galileo EV96100 Evaluation board (EXPERIMENTAL)"
+	bool "Galileo EV96100 Evaluation board (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
@@ -195,7 +195,7 @@ config MIPS_EV96100
 	  here if you wish to build a kernel for this platform.
 
 config MIPS_IVR
-	bool "Support for Globespan IVR board"
+	bool "Globespan IVR board"
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select ITE_BOARD_GEN
@@ -211,7 +211,7 @@ config MIPS_IVR
 	  build a kernel for this platform.
 
 config MIPS_ITE8172
-	bool "Support for ITE 8172G board"
+	bool "ITE 8172G board"
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select ITE_BOARD_GEN
@@ -228,7 +228,7 @@ config MIPS_ITE8172
 	  a kernel for this platform.
 
 config MACH_JAZZ
-	bool "Support for the Jazz family of machines"
+	bool "Jazz family of machines"
 	select ARC
 	select ARC32
 	select ARCH_MAY_HAVE_PC_FDC
@@ -246,7 +246,7 @@ config MACH_JAZZ
 	 Olivetti M700-10 workstations.
 
 config LASAT
-	bool "Support for LASAT Networks platforms"
+	bool "LASAT Networks platforms"
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select MIPS_GT64120
@@ -258,7 +258,7 @@ config LASAT
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config MIPS_ATLAS
-	bool "Support for MIPS Atlas board"
+	bool "MIPS Atlas board"
 	select BOOT_ELF32
 	select DMA_NONCOHERENT
 	select IRQ_CPU
@@ -283,7 +283,7 @@ config MIPS_ATLAS
 	  board.
 
 config MIPS_MALTA
-	bool "Support for MIPS Malta board"
+	bool "MIPS Malta board"
 	select ARCH_MAY_HAVE_PC_FDC
 	select BOOT_ELF32
 	select HAVE_STD_PC_SERIAL_PORT
@@ -311,7 +311,7 @@ config MIPS_MALTA
 	  board.
 
 config MIPS_SEAD
-	bool "Support for MIPS SEAD board (EXPERIMENTAL)"
+	bool "MIPS SEAD board (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
 	select IRQ_CPU
 	select DMA_NONCOHERENT
@@ -328,7 +328,7 @@ config MIPS_SEAD
 	  board.
 
 config MIPS_SIM
-	bool 'Support for MIPS simulator (MIPSsim)'
+	bool 'MIPS simulator (MIPSsim)'
 	select DMA_NONCOHERENT
 	select IRQ_CPU
 	select SYS_HAS_CPU_MIPS32_R1
@@ -341,7 +341,7 @@ config MIPS_SIM
 	  emulator.
 
 config MOMENCO_JAGUAR_ATX
-	bool "Support for Momentum Jaguar board"
+	bool "Momentum Jaguar board"
 	select BOOT_ELF32
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
@@ -361,7 +361,7 @@ config MOMENCO_JAGUAR_ATX
 	  Momentum Computer <http://www.momenco.com/>.
 
 config MOMENCO_OCELOT
-	bool "Support for Momentum Ocelot board"
+	bool "Momentum Ocelot board"
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select IRQ_CPU
@@ -378,7 +378,7 @@ config MOMENCO_OCELOT
 	  Momentum Computer <http://www.momenco.com/>.
 
 config MOMENCO_OCELOT_3
-	bool "Support for Momentum Ocelot-3 board"
+	bool "Momentum Ocelot-3 board"
 	select BOOT_ELF32
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
@@ -397,7 +397,7 @@ config MOMENCO_OCELOT_3
 	  PMC-Sierra Rm79000 core.
 
 config MOMENCO_OCELOT_C
-	bool "Support for Momentum Ocelot-C board"
+	bool "Momentum Ocelot-C board"
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select IRQ_CPU
@@ -414,7 +414,7 @@ config MOMENCO_OCELOT_C
 	  Momentum Computer <http://www.momenco.com/>.
 
 config MOMENCO_OCELOT_G
-	bool "Support for Momentum Ocelot-G board"
+	bool "Momentum Ocelot-G board"
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select IRQ_CPU
@@ -431,23 +431,23 @@ config MOMENCO_OCELOT_G
 	  Momentum Computer <http://www.momenco.com/>.
 
 config MIPS_XXS1500
-	bool "Support for MyCable XXS1500 board"
+	bool "MyCable XXS1500 board"
 	select DMA_NONCOHERENT
 	select SOC_AU1500
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config PNX8550_V2PCI
-	bool "Support for Philips PNX8550 based Viper2-PCI board"
+	bool "Philips PNX8550 based Viper2-PCI board"
 	select PNX8550
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config PNX8550_JBS
-	bool "Support for Philips PNX8550 based JBS board"
+	bool "Philips PNX8550 based JBS board"
 	select PNX8550
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config DDB5074
-	bool "Support for NEC DDB Vrc-5074 (EXPERIMENTAL)"
+	bool "NEC DDB Vrc-5074 (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
 	select DDB5XXX_COMMON
 	select DMA_NONCOHERENT
@@ -465,7 +465,7 @@ config DDB5074
 	  evaluation board.
 
 config DDB5476
-	bool "Support for NEC DDB Vrc-5476"
+	bool "NEC DDB Vrc-5476"
 	select DDB5XXX_COMMON
 	select DMA_NONCOHERENT
 	select HAVE_STD_PC_SERIAL_PORT
@@ -486,7 +486,7 @@ config DDB5476
 	  IDE controller, PS2 keyboard, PS2 mouse, etc.
 
 config DDB5477
-	bool "Support for NEC DDB Vrc-5477"
+	bool "NEC DDB Vrc-5477"
 	select DDB5XXX_COMMON
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
@@ -504,13 +504,13 @@ config DDB5477
 	  ether port USB, AC97, PCI, etc.
 
 config MACH_VR41XX
-	bool "Support for NEC VR4100 series based machines"
+	bool "NEC VR41XX-based machines"
 	select SYS_HAS_CPU_VR41XX
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
 
 config PMC_YOSEMITE
-	bool "Support for PMC-Sierra Yosemite eval board"
+	bool "PMC-Sierra Yosemite eval board"
 	select DMA_COHERENT
 	select HW_HAS_PCI
 	select IRQ_CPU
@@ -527,7 +527,7 @@ config PMC_YOSEMITE
 	  manufactured by PMC-Sierra.
 
 config QEMU
-	bool "Support for Qemu"
+	bool "Qemu"
 	select DMA_COHERENT
 	select GENERIC_ISA_DMA
 	select HAVE_STD_PC_SERIAL_PORT
@@ -547,7 +547,7 @@ config QEMU
 	  can be found at http://www.linux-mips.org/wiki/Qemu.
 
 config SGI_IP22
-	bool "Support for SGI IP22 (Indy/Indigo2)"
+	bool "SGI IP22 (Indy/Indigo2)"
 	select ARC
 	select ARC32
 	select BOOT_ELF32
@@ -567,7 +567,7 @@ config SGI_IP22
 	  that runs on these, say Y here.
 
 config SGI_IP27
-	bool "Support for SGI IP27 (Origin200/2000)"
+	bool "SGI IP27 (Origin200/2000)"
 	select ARC
 	select ARC64
 	select BOOT_ELF64
@@ -583,7 +583,7 @@ config SGI_IP27
 	  here.
 
 config SGI_IP32
-	bool "Support for SGI IP32 (O2) (EXPERIMENTAL)"
+	bool "SGI IP32 (O2) (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
 	select ARC
 	select ARC32
@@ -604,7 +604,7 @@ config SGI_IP32
 	  If you want this kernel to run on SGI O2 workstation, say Y here.
 
 config SIBYTE_BIGSUR
-	bool "Support for Sibyte BCM91480B-BigSur"
+	bool "Sibyte BCM91480B-BigSur"
 	select BOOT_ELF32
 	select DMA_COHERENT
 	select PCI_DOMAINS
@@ -615,7 +615,7 @@ config SIBYTE_BIGSUR
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config SIBYTE_SWARM
-	bool "Support for Sibyte BCM91250A-SWARM"
+	bool "Sibyte BCM91250A-SWARM"
 	select BOOT_ELF32
 	select DMA_COHERENT
 	select SIBYTE_SB1250
@@ -626,7 +626,7 @@ config SIBYTE_SWARM
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config SIBYTE_SENTOSA
-	bool "Support for Sibyte BCM91250E-Sentosa"
+	bool "Sibyte BCM91250E-Sentosa"
 	depends on EXPERIMENTAL
 	select BOOT_ELF32
 	select DMA_COHERENT
@@ -637,7 +637,7 @@ config SIBYTE_SENTOSA
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config SIBYTE_RHONE
-	bool "Support for Sibyte BCM91125E-Rhone"
+	bool "Sibyte BCM91125E-Rhone"
 	depends on EXPERIMENTAL
 	select BOOT_ELF32
 	select DMA_COHERENT
@@ -648,7 +648,7 @@ config SIBYTE_RHONE
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config SIBYTE_CARMEL
-	bool "Support for Sibyte BCM91120x-Carmel"
+	bool "Sibyte BCM91120x-Carmel"
 	depends on EXPERIMENTAL
 	select BOOT_ELF32
 	select DMA_COHERENT
@@ -659,7 +659,7 @@ config SIBYTE_CARMEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config SIBYTE_PTSWARM
-	bool "Support for Sibyte BCM91250PT-PTSWARM"
+	bool "Sibyte BCM91250PT-PTSWARM"
 	depends on EXPERIMENTAL
 	select BOOT_ELF32
 	select DMA_COHERENT
@@ -671,7 +671,7 @@ config SIBYTE_PTSWARM
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config SIBYTE_LITTLESUR
-	bool "Support for Sibyte BCM91250C2-LittleSur"
+	bool "Sibyte BCM91250C2-LittleSur"
 	depends on EXPERIMENTAL
 	select BOOT_ELF32
 	select DMA_COHERENT
@@ -683,7 +683,7 @@ config SIBYTE_LITTLESUR
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config SIBYTE_CRHINE
-	bool "Support for Sibyte BCM91120C-CRhine"
+	bool "Sibyte BCM91120C-CRhine"
 	depends on EXPERIMENTAL
 	select BOOT_ELF32
 	select DMA_COHERENT
@@ -694,7 +694,7 @@ config SIBYTE_CRHINE
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config SIBYTE_CRHONE
-	bool "Support for Sibyte BCM91125C-CRhone"
+	bool "Sibyte BCM91125C-CRhone"
 	depends on EXPERIMENTAL
 	select BOOT_ELF32
 	select DMA_COHERENT
@@ -706,7 +706,7 @@ config SIBYTE_CRHONE
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config SNI_RM200_PCI
-	bool "Support for SNI RM200 PCI"
+	bool "SNI RM200 PCI"
 	select ARC
 	select ARC32
 	select ARCH_MAY_HAVE_PC_FDC
@@ -732,7 +732,7 @@ config SNI_RM200_PCI
 	  support this machine type.
 
 config TOSHIBA_JMR3927
-	bool "Support for Toshiba JMR-TX3927 board"
+	bool "Toshiba JMR-TX3927 board"
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select MIPS_TX3927
@@ -743,7 +743,7 @@ config TOSHIBA_JMR3927
 	select TOSHIBA_BOARDS
 
 config TOSHIBA_RBTX4927
-	bool "Support for Toshiba TBTX49[23]7 board"
+	bool "Toshiba TBTX49[23]7 board"
 	select DMA_NONCOHERENT
 	select HAS_TXX9_SERIAL
 	select HW_HAS_PCI
@@ -760,7 +760,7 @@ config TOSHIBA_RBTX4927
 	  support this machine type
 
 config TOSHIBA_RBTX4938
-	bool "Support for Toshiba RBTX4938 board"
+	bool "Toshiba RBTX4938 board"
 	select HAVE_STD_PC_SERIAL_PORT
 	select DMA_NONCOHERENT
 	select GENERIC_ISA_DMA
@@ -1411,13 +1411,12 @@ config PAGE_SIZE_8KB
 
 config PAGE_SIZE_16KB
 	bool "16kB"
-	depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX
+	depends on !CPU_R3000 && !CPU_TX39XX
 	help
 	  Using 16kB page size will result in higher performance kernel at
 	  the price of higher memory consumption.  This option is available on
-	  all non-R3000 family processor.  Not that at the time of this
-	  writing this option is still high experimental; there are also
-	  issues with compatibility of user applications.
+	  all non-R3000 family processors.  Note that you will need a suitable
+	  Linux distribution to support this.
 
 config PAGE_SIZE_64KB
 	bool "64kB"
@@ -1426,8 +1425,7 @@ config PAGE_SIZE_64KB
 	  Using 64kB page size will result in higher performance kernel at
 	  the price of higher memory consumption.  This option is available on
 	  all non-R3000 family processor.  Not that at the time of this
-	  writing this option is still high experimental; there are also
-	  issues with compatibility of user applications.
+	  writing this option is still high experimental.
 
 endchoice
 

arch/mips/au1000/common/irq.c

@@ -68,6 +68,7 @@
 
 extern void set_debug_traps(void);
 extern irq_cpustat_t irq_stat [NR_CPUS];
+extern void mips_timer_interrupt(struct pt_regs *regs);
 
 static void setup_local_irq(unsigned int irq, int type, int int_req);
 static unsigned int startup_irq(unsigned int irq);

arch/mips/au1000/common/time.c

@@ -116,6 +116,7 @@ void mips_timer_interrupt(struct pt_regs *regs)
 
 null:
 	ack_r4ktimer(0);
+	irq_exit();
 }
 
 #ifdef CONFIG_PM

arch/mips/kernel/asm-offsets.c

@@ -272,8 +272,8 @@ void output_sc_defines(void)
 	text("/* Linux sigcontext offsets. */");
 	offset("#define SC_REGS       ", struct sigcontext, sc_regs);
 	offset("#define SC_FPREGS     ", struct sigcontext, sc_fpregs);
-	offset("#define SC_MDHI       ", struct sigcontext, sc_hi);
-	offset("#define SC_MDLO       ", struct sigcontext, sc_lo);
+	offset("#define SC_MDHI       ", struct sigcontext, sc_mdhi);
+	offset("#define SC_MDLO       ", struct sigcontext, sc_mdlo);
 	offset("#define SC_PC         ", struct sigcontext, sc_pc);
 	offset("#define SC_FPC_CSR    ", struct sigcontext, sc_fpc_csr);
 	linefeed;

arch/mips/kernel/cpu-probe.c

@@ -121,6 +121,7 @@ static inline void check_wait(void)
 	case CPU_24K:
 	case CPU_25KF:
 	case CPU_34K:
+	case CPU_74K:
  	case CPU_PR4450:
 		cpu_wait = r4k_wait;
 		printk(" available.\n");
@@ -432,6 +433,15 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
 		             MIPS_CPU_LLSC;
 		c->tlbsize = 64;
 		break;
+	case PRID_IMP_R14000:
+		c->cputype = CPU_R14000;
+		c->isa_level = MIPS_CPU_ISA_IV;
+		c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
+		             MIPS_CPU_FPU | MIPS_CPU_32FPR |
+			     MIPS_CPU_COUNTER | MIPS_CPU_WATCH |
+		             MIPS_CPU_LLSC;
+		c->tlbsize = 64;
+		break;
 	}
 }
 
@@ -593,6 +603,9 @@ static inline void cpu_probe_mips(struct cpuinfo_mips *c)
 	case PRID_IMP_34K:
 		c->cputype = CPU_34K;
 		break;
+	case PRID_IMP_74K:
+		c->cputype = CPU_74K;
+		break;
 	}
 }
 

arch/mips/kernel/entry.S

@@ -101,7 +101,7 @@ FEXPORT(restore_all)			# restore full frame
 	EMT
 1:
 	mfc0	v1, CP0_TCSTATUS
-	/* We set IXMT above, XOR should cler it here */
+	/* We set IXMT above, XOR should clear it here */
 	xori	v1, v1, TCSTATUS_IXMT
 	or	v1, v0, v1
 	mtc0	v1, CP0_TCSTATUS

arch/mips/kernel/gdb-low.S

@@ -54,9 +54,11 @@
 		 */
 		mfc0	k0, CP0_CAUSE
 		andi	k0, k0, 0x7c
-		add	k1, k1, k0
-		PTR_L	k0, saved_vectors(k1)
-		jr	k0
+#ifdef CONFIG_64BIT
+		dsll	k0, k0, 1
+#endif
+		PTR_L	k1, saved_vectors(k0)
+		jr	k1
 		nop
 1:
 		move	k0, sp

arch/mips/kernel/proc.c

@@ -42,6 +42,7 @@ static const char *cpu_name[] = {
 	[CPU_R8000]	= "R8000",
 	[CPU_R10000]	= "R10000",
 	[CPU_R12000]	= "R12000",
+	[CPU_R14000]	= "R14000",
 	[CPU_R4300]	= "R4300",
 	[CPU_R4650]	= "R4650",
 	[CPU_R4700]	= "R4700",
@@ -74,6 +75,7 @@ static const char *cpu_name[] = {
 	[CPU_24K]	= "MIPS 24K",
 	[CPU_25KF]	= "MIPS 25Kf",
 	[CPU_34K]	= "MIPS 34K",
+	[CPU_74K]	= "MIPS 74K",
 	[CPU_VR4111]	= "NEC VR4111",
 	[CPU_VR4121]	= "NEC VR4121",
 	[CPU_VR4122]	= "NEC VR4122",

arch/mips/kernel/signal-common.h

@@ -31,7 +31,6 @@ setup_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
 	save_gp_reg(31);
 #undef save_gp_reg
 
-#ifdef CONFIG_32BIT
 	err |= __put_user(regs->hi, &sc->sc_mdhi);
 	err |= __put_user(regs->lo, &sc->sc_mdlo);
 	if (cpu_has_dsp) {
@@ -43,20 +42,6 @@ setup_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
 		err |= __put_user(mflo3(), &sc->sc_lo3);
 		err |= __put_user(rddsp(DSP_MASK), &sc->sc_dsp);
 	}
-#endif
-#ifdef CONFIG_64BIT
-	err |= __put_user(regs->hi, &sc->sc_hi[0]);
-	err |= __put_user(regs->lo, &sc->sc_lo[0]);
-	if (cpu_has_dsp) {
-		err |= __put_user(mfhi1(), &sc->sc_hi[1]);
-		err |= __put_user(mflo1(), &sc->sc_lo[1]);
-		err |= __put_user(mfhi2(), &sc->sc_hi[2]);
-		err |= __put_user(mflo2(), &sc->sc_lo[2]);
-		err |= __put_user(mfhi3(), &sc->sc_hi[3]);
-		err |= __put_user(mflo3(), &sc->sc_lo[3]);
-		err |= __put_user(rddsp(DSP_MASK), &sc->sc_dsp);
-	}
-#endif
 
 	err |= __put_user(!!used_math(), &sc->sc_used_math);
 
@@ -92,7 +77,6 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
 	current_thread_info()->restart_block.fn = do_no_restart_syscall;
 
 	err |= __get_user(regs->cp0_epc, &sc->sc_pc);
-#ifdef CONFIG_32BIT
 	err |= __get_user(regs->hi, &sc->sc_mdhi);
 	err |= __get_user(regs->lo, &sc->sc_mdlo);
 	if (cpu_has_dsp) {
@@ -104,20 +88,6 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
 		err |= __get_user(treg, &sc->sc_lo3); mtlo3(treg);
 		err |= __get_user(treg, &sc->sc_dsp); wrdsp(treg, DSP_MASK);
 	}
-#endif
-#ifdef CONFIG_64BIT
-	err |= __get_user(regs->hi, &sc->sc_hi[0]);
-	err |= __get_user(regs->lo, &sc->sc_lo[0]);
-	if (cpu_has_dsp) {
-		err |= __get_user(treg, &sc->sc_hi[1]); mthi1(treg);
-		err |= __get_user(treg, &sc->sc_lo[1]); mthi1(treg);
-		err |= __get_user(treg, &sc->sc_hi[2]); mthi2(treg);
-		err |= __get_user(treg, &sc->sc_lo[2]); mthi2(treg);
-		err |= __get_user(treg, &sc->sc_hi[3]); mthi3(treg);
-		err |= __get_user(treg, &sc->sc_lo[3]); mthi3(treg);
-		err |= __get_user(treg, &sc->sc_dsp); wrdsp(treg, DSP_MASK);
-	}
-#endif
 
 #define restore_gp_reg(i) do {						\
 	err |= __get_user(regs->regs[i], &sc->sc_regs[i]);		\

arch/mips/kernel/syscall.c

@@ -280,27 +280,6 @@ asmlinkage int _sys_sysmips(int cmd, long arg1, int arg2, int arg3)
 	char	__user *name;
 
 	switch(cmd) {
-	case SETNAME: {
-		char nodename[__NEW_UTS_LEN + 1];
-
-		if (!capable(CAP_SYS_ADMIN))
-			return -EPERM;
-
-		name = (char __user *) arg1;
-
-		len = strncpy_from_user(nodename, name, __NEW_UTS_LEN);
-		if (len < 0)
-			return -EFAULT;
-
-		down_write(&uts_sem);
-		strncpy(system_utsname.nodename, nodename, len);
-		nodename[__NEW_UTS_LEN] = '\0';
-		strlcpy(system_utsname.nodename, nodename,
-		        sizeof(system_utsname.nodename));
-		up_write(&uts_sem);
-		return 0;
-	}
-
 	case MIPS_ATOMIC_SET:
 		printk(KERN_CRIT "How did I get here?\n");
 		return -EINVAL;
@@ -313,9 +292,6 @@ asmlinkage int _sys_sysmips(int cmd, long arg1, int arg2, int arg3)
 	case FLUSH_CACHE:
 		__flush_cache_all();
 		return 0;
-
-	case MIPS_RDNVRAM:
-		return -EIO;
 	}
 
 	return -EINVAL;

arch/mips/kernel/traps.c

@@ -902,6 +902,7 @@ static inline void parity_protection_init(void)
 {
 	switch (current_cpu_data.cputype) {
 	case CPU_24K:
+	case CPU_34K:
 	case CPU_5KC:
 		write_c0_ecc(0x80000000);
 		back_to_back_c0_hazard();

arch/mips/kernel/vmlinux.lds.S

@@ -151,23 +151,13 @@ SECTIONS
 
   /* This is the MIPS specific mdebug section.  */
   .mdebug : { *(.mdebug) }
-  /* These are needed for ELF backends which have not yet been
-     converted to the new style linker.  */
-  .stab 0 : { *(.stab) }
-  .stabstr 0 : { *(.stabstr) }
-  /* DWARF debug sections.
-     Symbols in the .debug DWARF section are relative to the beginning of the
-     section so we begin .debug at 0.  It's not clear yet what needs to happen
-     for the others.   */
-  .debug          0 : { *(.debug) }
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }
-  .debug_aranges  0 : { *(.debug_aranges) }
-  .debug_pubnames 0 : { *(.debug_pubnames) }
-  .debug_sfnames  0 : { *(.debug_sfnames) }
-  .line           0 : { *(.line) }
+
+  STABS_DEBUG
+
+  DWARF_DEBUG
+
   /* These must appear regardless of  .  */
   .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) }
   .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) }
-  .comment : { *(.comment) }
   .note : { *(.note) }
 }

arch/mips/mm/c-r4k.c

@@ -29,6 +29,27 @@
 #include <asm/war.h>
 #include <asm/cacheflush.h> /* for run_uncached() */
 
+
+/*
+ * Special Variant of smp_call_function for use by cache functions:
+ *
+ *  o No return value
+ *  o collapses to normal function call on UP kernels
+ *  o collapses to normal function call on systems with a single shared
+ *    primary cache.
+ */
+static inline void r4k_on_each_cpu(void (*func) (void *info), void *info,
+                                   int retry, int wait)
+{
+	preempt_disable();
+
+#if !defined(CONFIG_MIPS_MT_SMP) && !defined(CONFIG_MIPS_MT_SMTC)
+	smp_call_function(func, info, retry, wait);
+#endif
+	func(info);
+	preempt_enable();
+}
+
 /*
  * Must die.
  */
@@ -299,7 +320,7 @@ static void r4k_flush_cache_all(void)
 	if (!cpu_has_dc_aliases)
 		return;
 
-	on_each_cpu(local_r4k_flush_cache_all, NULL, 1, 1);
+	r4k_on_each_cpu(local_r4k_flush_cache_all, NULL, 1, 1);
 }
 
 static inline void local_r4k___flush_cache_all(void * args)
@@ -314,13 +335,14 @@ static inline void local_r4k___flush_cache_all(void * args)
 	case CPU_R4400MC:
 	case CPU_R10000:
 	case CPU_R12000:
+	case CPU_R14000:
 		r4k_blast_scache();
 	}
 }
 
 static void r4k___flush_cache_all(void)
 {
-	on_each_cpu(local_r4k___flush_cache_all, NULL, 1, 1);
+	r4k_on_each_cpu(local_r4k___flush_cache_all, NULL, 1, 1);
 }
 
 static inline void local_r4k_flush_cache_range(void * args)
@@ -341,7 +363,7 @@ static inline void local_r4k_flush_cache_range(void * args)
 static void r4k_flush_cache_range(struct vm_area_struct *vma,
 	unsigned long start, unsigned long end)
 {
-	on_each_cpu(local_r4k_flush_cache_range, vma, 1, 1);
+	r4k_on_each_cpu(local_r4k_flush_cache_range, vma, 1, 1);
 }
 
 static inline void local_r4k_flush_cache_mm(void * args)
@@ -370,7 +392,7 @@ static void r4k_flush_cache_mm(struct mm_struct *mm)
 	if (!cpu_has_dc_aliases)
 		return;
 
-	on_each_cpu(local_r4k_flush_cache_mm, mm, 1, 1);
+	r4k_on_each_cpu(local_r4k_flush_cache_mm, mm, 1, 1);
 }
 
 struct flush_cache_page_args {
@@ -461,7 +483,7 @@ static void r4k_flush_cache_page(struct vm_area_struct *vma,
 	args.addr = addr;
 	args.pfn = pfn;
 
-	on_each_cpu(local_r4k_flush_cache_page, &args, 1, 1);
+	r4k_on_each_cpu(local_r4k_flush_cache_page, &args, 1, 1);
 }
 
 static inline void local_r4k_flush_data_cache_page(void * addr)
@@ -471,7 +493,7 @@ static inline void local_r4k_flush_data_cache_page(void * addr)
 
 static void r4k_flush_data_cache_page(unsigned long addr)
 {
-	on_each_cpu(local_r4k_flush_data_cache_page, (void *) addr, 1, 1);
+	r4k_on_each_cpu(local_r4k_flush_data_cache_page, (void *) addr, 1, 1);
 }
 
 struct flush_icache_range_args {
@@ -514,7 +536,7 @@ static void r4k_flush_icache_range(unsigned long start, unsigned long end)
 	args.start = start;
 	args.end = end;
 
-	on_each_cpu(local_r4k_flush_icache_range, &args, 1, 1);
+	r4k_on_each_cpu(local_r4k_flush_icache_range, &args, 1, 1);
 	instruction_hazard();
 }
 
@@ -590,7 +612,7 @@ static void r4k_flush_icache_page(struct vm_area_struct *vma,
 	args.vma = vma;
 	args.page = page;
 
-	on_each_cpu(local_r4k_flush_icache_page, &args, 1, 1);
+	r4k_on_each_cpu(local_r4k_flush_icache_page, &args, 1, 1);
 }
 
 
@@ -689,7 +711,7 @@ static void local_r4k_flush_cache_sigtramp(void * arg)
 
 static void r4k_flush_cache_sigtramp(unsigned long addr)
 {
-	on_each_cpu(local_r4k_flush_cache_sigtramp, (void *) addr, 1, 1);
+	r4k_on_each_cpu(local_r4k_flush_cache_sigtramp, (void *) addr, 1, 1);
 }
 
 static void r4k_flush_icache_all(void)
@@ -812,6 +834,7 @@ static void __init probe_pcache(void)
 
 	case CPU_R10000:
 	case CPU_R12000:
+	case CPU_R14000:
 		icache_size = 1 << (12 + ((config & R10K_CONF_IC) >> 29));
 		c->icache.linesz = 64;
 		c->icache.ways = 2;
@@ -965,9 +988,11 @@ static void __init probe_pcache(void)
 		c->dcache.flags |= MIPS_CACHE_PINDEX;
 	case CPU_R10000:
 	case CPU_R12000:
+	case CPU_R14000:
 	case CPU_SB1:
 		break;
 	case CPU_24K:
+	case CPU_34K:
 		if (!(read_c0_config7() & (1 << 16)))
 	default:
 			if (c->dcache.waysize > PAGE_SIZE)
@@ -1091,6 +1116,7 @@ static void __init setup_scache(void)
 
 	case CPU_R10000:
 	case CPU_R12000:
+	case CPU_R14000:
 		scache_size = 0x80000 << ((config & R10K_CONF_SS) >> 16);
 		c->scache.linesz = 64 << ((config >> 13) & 1);
 		c->scache.ways = 2;

arch/mips/mm/pg-r4k.c

@@ -357,6 +357,7 @@ void __init build_clear_page(void)
 
 		case CPU_R10000:
 		case CPU_R12000:
+		case CPU_R14000:
 			pref_src_mode = Pref_LoadStreamed;
 			pref_dst_mode = Pref_StoreStreamed;
 			break;

arch/mips/mm/tlbex.c

@@ -875,6 +875,7 @@ static __init void build_tlb_write_entry(u32 **p, struct label **l,
 
 	case CPU_R10000:
 	case CPU_R12000:
+	case CPU_R14000:
 	case CPU_4KC:
 	case CPU_SB1:
 	case CPU_SB1A:
@@ -906,6 +907,7 @@ static __init void build_tlb_write_entry(u32 **p, struct label **l,
 	case CPU_4KEC:
 	case CPU_24K:
 	case CPU_34K:
+	case CPU_74K:
 		i_ehb(p);
 		tlbw(p);
 		break;

arch/mips/oprofile/common.c

@@ -80,6 +80,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
 	case CPU_24K:
 	case CPU_25KF:
 	case CPU_34K:
+	case CPU_74K:
 	case CPU_SB1:
 	case CPU_SB1A:
 		lmodel = &op_model_mipsxx;

arch/mips/oprofile/op_model_mipsxx.c

@@ -205,6 +205,10 @@ static int __init mipsxx_init(void)
 	case CPU_34K:
 		op_model_mipsxx.cpu_type = "mips/34K";
 		break;
+
+	case CPU_74K:
+		op_model_mipsxx.cpu_type = "mips/74K";
+		break;
 #endif
 
 	case CPU_5KC:

arch/powerpc/kernel/prom_init.c

@@ -1975,10 +1975,45 @@ static void __init flatten_device_tree(void)
 
 }
 
-
-static void __init fixup_device_tree(void)
+#ifdef CONFIG_PPC_MAPLE
+/* PIBS Version 1.05.0000 04/26/2005 has an incorrect /ht/isa/ranges property.
+ * The values are bad, and it doesn't even have the right number of cells. */
+static void __init fixup_device_tree_maple(void)
 {
+	phandle isa;
+	u32 isa_ranges[6];
+
+	isa = call_prom("finddevice", 1, 1, ADDR("/ht@0/isa@4"));
+	if (!PHANDLE_VALID(isa))
+		return;
+
+	if (prom_getprop(isa, "ranges", isa_ranges, sizeof(isa_ranges))
+		== PROM_ERROR)
+		return;
+
+	if (isa_ranges[0] != 0x1 ||
+		isa_ranges[1] != 0xf4000000 ||
+		isa_ranges[2] != 0x00010000)
+		return;
+
+	prom_printf("fixing up bogus ISA range on Maple...\n");
+
+	isa_ranges[0] = 0x1;
+	isa_ranges[1] = 0x0;
+	isa_ranges[2] = 0x01002000; /* IO space; PCI device = 4 */
+	isa_ranges[3] = 0x0;
+	isa_ranges[4] = 0x0;
+	isa_ranges[5] = 0x00010000;
+	prom_setprop(isa, "/ht@0/isa@4", "ranges",
+			isa_ranges, sizeof(isa_ranges));
+}
+#else
+#define fixup_device_tree_maple()
+#endif
+
 #if defined(CONFIG_PPC64) && defined(CONFIG_PPC_PMAC)
+static void __init fixup_device_tree_pmac(void)
+{
 	phandle u3, i2c, mpic;
 	u32 u3_rev;
 	u32 interrupts[2];
@@ -2015,9 +2050,16 @@ static void __init fixup_device_tree(void)
 	parent = (u32)mpic;
 	prom_setprop(i2c, "/u3@0,f8000000/i2c@f8001000", "interrupt-parent",
 		     &parent, sizeof(parent));
-#endif
 }
+#else
+#define fixup_device_tree_pmac()
+#endif
 
+static void __init fixup_device_tree(void)
+{
+	fixup_device_tree_maple();
+	fixup_device_tree_pmac();
+}
 
 static void __init prom_find_boot_cpu(void)
 {

arch/powerpc/kernel/systbl.S

@@ -338,6 +338,8 @@ SYSCALL(symlinkat)
 SYSCALL(readlinkat)
 SYSCALL(fchmodat)
 SYSCALL(faccessat)
+COMPAT_SYS(get_robust_list)
+COMPAT_SYS(set_robust_list)
 
 /*
  * please add new calls to arch/powerpc/platforms/cell/spu_callbacks.c

arch/powerpc/platforms/cell/spu_callbacks.c

@@ -258,6 +258,7 @@ void *spu_syscall_table[] = {
 	[__NR_futex]			sys_futex,
 	[__NR_sched_setaffinity]	sys_sched_setaffinity,
 	[__NR_sched_getaffinity]	sys_sched_getaffinity,
+	[224]				sys_ni_syscall,
 	[__NR_tuxcall]			sys_ni_syscall,
 	[226]				sys_ni_syscall,
 	[__NR_io_setup]			sys_io_setup,
@@ -332,19 +333,21 @@ void *spu_syscall_table[] = {
 	[__NR_readlinkat]		sys_readlinkat,
 	[__NR_fchmodat]			sys_fchmodat,
 	[__NR_faccessat]		sys_faccessat,
+	[__NR_get_robust_list]		sys_get_robust_list,
+	[__NR_set_robust_list]		sys_set_robust_list,
 };
 
 long spu_sys_callback(struct spu_syscall_block *s)
 {
 	long (*syscall)(u64 a1, u64 a2, u64 a3, u64 a4, u64 a5, u64 a6);
 
-	syscall = spu_syscall_table[s->nr_ret];
-
 	if (s->nr_ret >= ARRAY_SIZE(spu_syscall_table)) {
 		pr_debug("%s: invalid syscall #%ld", __FUNCTION__, s->nr_ret);
 		return -ENOSYS;
 	}
 
+	syscall = spu_syscall_table[s->nr_ret];
+
 #ifdef DEBUG
 	print_symbol(KERN_DEBUG "SPU-syscall %s:", (unsigned long)syscall);
 	printk("syscall%ld(%lx, %lx, %lx, %lx, %lx, %lx)\n",

arch/powerpc/platforms/powermac/low_i2c.c

@@ -1157,6 +1157,7 @@ EXPORT_SYMBOL_GPL(pmac_i2c_xfer);
 /* some quirks for platform function decoding */
 enum {
 	pmac_i2c_quirk_invmask = 0x00000001u,
+	pmac_i2c_quirk_skip = 0x00000002u,
 };
 
 static void pmac_i2c_devscan(void (*callback)(struct device_node *dev,
@@ -1172,6 +1173,15 @@ static void pmac_i2c_devscan(void (*callback)(struct device_node *dev,
 		/* XXX Study device-tree's & apple drivers are get the quirks
 		 * right !
 		 */
+		/* Workaround: It seems that running the clockspreading
+		 * properties on the eMac will cause lockups during boot.
+		 * The machine seems to work fine without that. So for now,
+		 * let's make sure i2c-hwclock doesn't match about "imic"
+		 * clocks and we'll figure out if we really need to do
+		 * something special about those later.
+		 */
+		{ "i2c-hwclock", "imic5002", pmac_i2c_quirk_skip },
+		{ "i2c-hwclock", "imic5003", pmac_i2c_quirk_skip },
 		{ "i2c-hwclock", NULL, pmac_i2c_quirk_invmask },
 		{ "i2c-cpu-voltage", NULL, 0},
 		{  "temp-monitor", NULL, 0 },
@@ -1198,6 +1208,8 @@ static void pmac_i2c_devscan(void (*callback)(struct device_node *dev,
 				if (p->compatible &&
 				    !device_is_compatible(np, p->compatible))
 					continue;
+				if (p->quirks & pmac_i2c_quirk_skip)
+					break;
 				callback(np, p->quirks);
 				break;
 			}

arch/powerpc/platforms/powermac/setup.c

@@ -463,11 +463,23 @@ static int pmac_pm_finish(suspend_state_t state)
 	return 0;
 }
 
+static int pmac_pm_valid(suspend_state_t state)
+{
+	switch (state) {
+	case PM_SUSPEND_DISK:
+		return 1;
+	/* can't do any other states via generic mechanism yet */
+	default:
+		return 0;
+	}
+}
+
 static struct pm_ops pmac_pm_ops = {
 	.pm_disk_mode	= PM_DISK_SHUTDOWN,
 	.prepare	= pmac_pm_prepare,
 	.enter		= pmac_pm_enter,
 	.finish		= pmac_pm_finish,
+	.valid		= pmac_pm_valid,
 };
 
 #endif /* CONFIG_SOFTWARE_SUSPEND */

arch/ppc/kernel/asm-offsets.c

@@ -134,7 +134,7 @@ main(void)
 	DEFINE(TI_TASK, offsetof(struct thread_info, task));
 	DEFINE(TI_EXECDOMAIN, offsetof(struct thread_info, exec_domain));
 	DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
-	DEFINE(TI_LOCAL_FLAGS, offsetof(struct thread_info, flags));
+	DEFINE(TI_LOCAL_FLAGS, offsetof(struct thread_info, local_flags));
 	DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
 	DEFINE(TI_PREEMPT, offsetof(struct thread_info, preempt_count));
 

arch/ppc/platforms/mpc8272ads_setup.c

@@ -279,11 +279,11 @@ static int mpc8272ads_platform_notify(struct device *dev)
 	static const struct platform_notify_dev_map dev_map[] = {
 		{
 			.bus_id = "fsl-cpm-fcc",
-			.rtn = mpc8272ads_fixup_enet_pdata
+			.rtn = mpc8272ads_fixup_enet_pdata,
 		},
 		{
 			.bus_id = "fsl-cpm-scc:uart",
-			.rtn = mpc
+			.rtn = mpc8272ads_fixup_uart_pdata,
 		},
 		{
 			.bus_id = NULL
@@ -335,15 +335,15 @@ struct platform_device* early_uart_get_pdev(int index)
 	struct platform_device* pdev = NULL;
 	if(index) { /*assume SCC4 here*/
 		pdev = &ppc_sys_platform_devices[MPC82xx_CPM_SCC4];
-		pinfo = &mpc8272<F12>_uart_pdata[1];
+		pinfo = &mpc8272_uart_pdata[fsid_scc4_uart];
 	} else { /*over SCC1*/
 		pdev = &ppc_sys_platform_devices[MPC82xx_CPM_SCC1];
-		pinfo = &mpc8272_uart_pdata[0];
+		pinfo = &mpc8272_uart_pdata[fsid_scc1_uart];
 	}
 
 	pinfo->uart_clk = bd->bi_intfreq;
 	pdev->dev.platform_data = pinfo;
-	ppc_sys_fixup_mem_resource(pdev, IMAP_ADDR);
+	ppc_sys_fixup_mem_resource(pdev, CPM_MAP_ADDR);
 	return NULL;
 }
 

arch/ppc/syslib/pq2_devices.c

@@ -121,13 +121,13 @@ struct platform_device ppc_sys_platform_devices[] = {
 		.num_resources	 = 3,
 		.resource = (struct resource[]) {
 			{
-				.name	= "scc_mem",
+				.name	= "regs",
 				.start	= 0x11A00,
 				.end	= 0x11A1F,
 				.flags	= IORESOURCE_MEM,
 			},
 			{
-				.name	= "scc_pram",
+				.name	= "pram",
 				.start	= 0x8000,
 				.end	= 0x80ff,
 				.flags	= IORESOURCE_MEM,
@@ -145,13 +145,13 @@ struct platform_device ppc_sys_platform_devices[] = {
 		.num_resources	 = 3,
 		.resource = (struct resource[]) {
 			{
-				.name	= "scc_mem",
+				.name	= "regs",
 				.start	= 0x11A20,
 				.end	= 0x11A3F,
 				.flags	= IORESOURCE_MEM,
 			},
 			{
-				.name	= "scc_pram",
+				.name	= "pram",
 				.start	= 0x8100,
 				.end	= 0x81ff,
 				.flags	= IORESOURCE_MEM,
@@ -169,13 +169,13 @@ struct platform_device ppc_sys_platform_devices[] = {
 		.num_resources	 = 3,
 		.resource = (struct resource[]) {
 			{
-				.name 	= "scc_mem",
+				.name 	= "regs",
 				.start	= 0x11A40,
 				.end	= 0x11A5F,
 				.flags	= IORESOURCE_MEM,
 			},
 			{
-				.name	= "scc_pram",
+				.name	= "pram",
 				.start	= 0x8200,
 				.end	= 0x82ff,
 				.flags	= IORESOURCE_MEM,
@@ -193,13 +193,13 @@ struct platform_device ppc_sys_platform_devices[] = {
 		.num_resources	 = 3,
 		.resource = (struct resource[]) {
 			{
-				.name	= "scc_mem",
+				.name	= "regs",
 				.start	= 0x11A60,
 				.end	= 0x11A7F,
 				.flags	= IORESOURCE_MEM,
 			},
 			{
-				.name	= "scc_pram",
+				.name	= "pram",
 				.start	= 0x8300,
 				.end	= 0x83ff,
 				.flags	= IORESOURCE_MEM,

arch/ppc/syslib/pq2_sys.c

@@ -139,13 +139,13 @@ struct ppc_sys_spec ppc_sys_specs[] = {
 		.ppc_sys_name	= "8272",
 		.mask		= 0x0000ff00,
 		.value		= 0x00000c00,
-		.num_devices	= 11,
+		.num_devices	= 12,
 		.device_list = (enum ppc_sys_devices[])
 		{
 			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_SCC1,
-			MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SMC1,
-			MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C,
-			MPC82xx_CPM_USB, MPC82xx_SEC1,
+			MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SCC4,
+			MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI,
+			MPC82xx_CPM_I2C, MPC82xx_CPM_USB, MPC82xx_SEC1,
 		},
 	},
 	/* below is a list of the 8280 family of processors */

arch/s390/kernel/time.c

@@ -272,7 +272,7 @@ static inline void stop_hz_timer(void)
 	next = next_timer_interrupt();
 	do {
 		seq = read_seqbegin_irqsave(&xtime_lock, flags);
-		timer = (__u64)(next - jiffies) + jiffies_64;
+		timer = ((__u64) next) - ((__u64) jiffies) + jiffies_64;
 	} while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
 	todval = -1ULL;
 	/* Be careful about overflows. */

arch/sparc/kernel/systbls.S

@@ -79,6 +79,7 @@ sys_call_table:
 /*285*/	.long sys_mkdirat, sys_mknodat, sys_fchownat, sys_futimesat, sys_fstatat64
 /*290*/	.long sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat
 /*295*/	.long sys_fchmodat, sys_faccessat, sys_pselect6, sys_ppoll, sys_unshare
+/*300*/	.long sys_set_robust_list, sys_get_robust_list
 
 #ifdef CONFIG_SUNOS_EMUL
 	/* Now the SunOS syscall table. */
@@ -190,6 +191,6 @@ sunos_sys_table:
 /*290*/	.long sunos_nosys, sunos_nosys, sunos_nosys
 	.long sunos_nosys, sunos_nosys, sunos_nosys
 	.long sunos_nosys, sunos_nosys, sunos_nosys
-	.long sunos_nosys
+	.long sunos_nosys, sunos_nosys, sunos_nosys
 
 #endif

arch/sparc64/kernel/pci_iommu.c

@@ -218,7 +218,7 @@ static inline void iommu_free_ctx(struct pci_iommu *iommu, int ctx)
  * DMA for PCI device PDEV.  Return non-NULL cpu-side address if
  * successful and set *DMA_ADDRP to the PCI side dma address.
  */
-static void *pci_4u_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_addrp)
+static void *pci_4u_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_addrp, gfp_t gfp)
 {
 	struct pcidev_cookie *pcp;
 	struct pci_iommu *iommu;
@@ -232,7 +232,7 @@ static void *pci_4u_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr
 	if (order >= 10)
 		return NULL;
 
-	first_page = __get_free_pages(GFP_ATOMIC, order);
+	first_page = __get_free_pages(gfp, order);
 	if (first_page == 0UL)
 		return NULL;
 	memset((char *)first_page, 0, PAGE_SIZE << order);

arch/sparc64/kernel/pci_sun4v.c

@@ -154,7 +154,7 @@ static void pci_arena_free(struct pci_iommu_arena *arena, unsigned long base, un
 		__clear_bit(i, arena->map);
 }
 
-static void *pci_4v_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_addrp)
+static void *pci_4v_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_addrp, gfp_t gfp)
 {
 	struct pcidev_cookie *pcp;
 	struct pci_iommu *iommu;
@@ -169,7 +169,7 @@ static void *pci_4v_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr
 
 	npages = size >> IO_PAGE_SHIFT;
 
-	first_page = __get_free_pages(GFP_ATOMIC, order);
+	first_page = __get_free_pages(gfp, order);
 	if (unlikely(first_page == 0UL))
 		return NULL;
 

arch/sparc64/kernel/systbls.S

@@ -78,8 +78,9 @@ sys_call_table32:
 	.word compat_sys_mq_timedsend, compat_sys_mq_timedreceive, compat_sys_mq_notify, compat_sys_mq_getsetattr, compat_sys_waitid
 /*280*/	.word sys32_tee, sys_add_key, sys_request_key, sys_keyctl, compat_sys_openat
 	.word sys_mkdirat, sys_mknodat, sys_fchownat, compat_sys_futimesat, compat_sys_fstatat64
-/*285*/	.word sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat
+/*290*/	.word sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat
 	.word sys_fchmodat, sys_faccessat, compat_sys_pselect6, compat_sys_ppoll, sys_unshare
+/*300*/	.word compat_sys_set_robust_list, compat_sys_get_robust_list
 
 #endif /* CONFIG_COMPAT */
 
@@ -147,8 +148,9 @@ sys_call_table:
 	.word sys_mq_timedsend, sys_mq_timedreceive, sys_mq_notify, sys_mq_getsetattr, sys_waitid
 /*280*/	.word sys_tee, sys_add_key, sys_request_key, sys_keyctl, sys_openat
 	.word sys_mkdirat, sys_mknodat, sys_fchownat, sys_futimesat, sys_fstatat64
-/*285*/	.word sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat
+/*290*/	.word sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat
 	.word sys_fchmodat, sys_faccessat, sys_pselect6, sys_ppoll, sys_unshare
+/*300*/	.word sys_set_robust_list, sys_get_robust_list
 
 #if defined(CONFIG_SUNOS_EMUL) || defined(CONFIG_SOLARIS_EMUL) || \
     defined(CONFIG_SOLARIS_EMUL_MODULE)
@@ -261,5 +263,5 @@ sunos_sys_table:
 /*290*/	.word sunos_nosys, sunos_nosys, sunos_nosys
 	.word sunos_nosys, sunos_nosys, sunos_nosys
 	.word sunos_nosys, sunos_nosys, sunos_nosys
-	.word sunos_nosys
+	.word sunos_nosys, sunos_nosys, sunos_nosys
 #endif

arch/x86_64/ia32/ia32_binfmt.c

@@ -339,7 +339,7 @@ int ia32_setup_arg_pages(struct linux_binprm *bprm, unsigned long stack_top,
 	struct mm_struct *mm = current->mm;
 	int i, ret;
 
-	stack_base = IA32_STACK_TOP - MAX_ARG_PAGES * PAGE_SIZE;
+	stack_base = stack_top - MAX_ARG_PAGES * PAGE_SIZE;
 	mm->arg_start = bprm->p + stack_base;
 
 	bprm->p += stack_base;
@@ -357,7 +357,7 @@ int ia32_setup_arg_pages(struct linux_binprm *bprm, unsigned long stack_top,
 	{
 		mpnt->vm_mm = mm;
 		mpnt->vm_start = PAGE_MASK & (unsigned long) bprm->p;
-		mpnt->vm_end = IA32_STACK_TOP;
+		mpnt->vm_end = stack_top;
 		if (executable_stack == EXSTACK_ENABLE_X)
 			mpnt->vm_flags = VM_STACK_FLAGS |  VM_EXEC;
 		else if (executable_stack == EXSTACK_DISABLE_X)

arch/x86_64/kernel/e820.c

@@ -149,7 +149,7 @@ unsigned long __init find_e820_area(unsigned long start, unsigned long end, unsi
 			addr = start;
 		if (addr > ei->addr + ei->size) 
 			continue; 
-		while (bad_addr(&addr, size) && addr+size < ei->addr + ei->size)
+		while (bad_addr(&addr, size) && addr+size <= ei->addr+ei->size)
 			;
 		last = addr + size;
 		if (last > ei->addr + ei->size)

arch/x86_64/kernel/entry.S

@@ -281,12 +281,7 @@ tracesys:
 	ja  1f
 	movq %r10,%rcx	/* fixup for C */
 	call *sys_call_table(,%rax,8)
-	movq %rax,RAX-ARGOFFSET(%rsp)
-1:	SAVE_REST
-	movq %rsp,%rdi
-	call syscall_trace_leave
-	RESTORE_TOP_OF_STACK %rbx
-	RESTORE_REST
+1:	movq %rax,RAX-ARGOFFSET(%rsp)
 	/* Use IRET because user could have changed frame */
 	jmp int_ret_from_sys_call
 	CFI_ENDPROC

arch/x86_64/kernel/kprobes.c

@@ -514,13 +514,13 @@ static void __kprobes resume_execution(struct kprobe *p,
 		*tos = orig_rip + (*tos - copy_rip);
 		break;
 	case 0xff:
-		if ((*insn & 0x30) == 0x10) {
+		if ((insn[1] & 0x30) == 0x10) {
 			/* call absolute, indirect */
 			/* Fix return addr; rip is correct. */
 			next_rip = regs->rip;
 			*tos = orig_rip + (*tos - copy_rip);
-		} else if (((*insn & 0x31) == 0x20) ||	/* jmp near, absolute indirect */
-			   ((*insn & 0x31) == 0x21)) {	/* jmp far, absolute indirect */
+		} else if (((insn[1] & 0x31) == 0x20) ||	/* jmp near, absolute indirect */
+			   ((insn[1] & 0x31) == 0x21)) {	/* jmp far, absolute indirect */
 			/* rip is correct. */
 			next_rip = regs->rip;
 		}

arch/x86_64/kernel/pci-dma.c

@@ -54,6 +54,10 @@ dma_alloc_pages(struct device *dev, gfp_t gfp, unsigned order)
 	else
 #endif
 		node = numa_node_id();
+
+	if (node < first_node(node_online_map))
+		node = first_node(node_online_map);
+
 	page = alloc_pages_node(node, gfp, order);
 	return page ? page_address(page) : NULL;
 }

arch/x86_64/kernel/pci-gart.c

@@ -631,10 +631,8 @@ static int __init pci_iommu_init(void)
 		printk(KERN_INFO "PCI-DMA: Disabling IOMMU.\n");
 		if (end_pfn > MAX_DMA32_PFN) {
 			printk(KERN_ERR "WARNING more than 4GB of memory "
-					"but IOMMU not compiled in.\n"
-			       KERN_ERR "WARNING 32bit PCI may malfunction.\n"
-			       KERN_ERR "You might want to enable "
-					"CONFIG_GART_IOMMU\n");
+					"but IOMMU not available.\n"
+			       KERN_ERR "WARNING 32bit PCI may malfunction.\n");
 		}
 		return -1;
 	}

arch/x86_64/kernel/pmtimer.c

@@ -68,7 +68,7 @@ int pmtimer_mark_offset(void)
 	offset_delay = delta % (USEC_PER_SEC / HZ);
 
 	rdtscll(tsc);
-	vxtime.last_tsc = tsc - offset_delay * cpu_khz;
+	vxtime.last_tsc = tsc - offset_delay * (u64)cpu_khz / 1000;
 
 	/* don't calculate delay for first run,
 	   or if we've got less then a tick */

arch/x86_64/kernel/setup.c

@@ -1051,7 +1051,7 @@ static void srat_detect_node(void)
 	   for now. */
 	node = apicid_to_node[hard_smp_processor_id()];
 	if (node == NUMA_NO_NODE)
-		node = 0;
+		node = first_node(node_online_map);
 	numa_set_node(cpu, node);
 
 	if (acpi_numa > 0)

arch/x86_64/mm/srat.c

@@ -399,8 +399,10 @@ int __init acpi_scan_nodes(unsigned long start, unsigned long end)
 	/* First clean up the node list */
 	for (i = 0; i < MAX_NUMNODES; i++) {
  		cutoff_node(i, start, end);
-		if ((nodes[i].end - nodes[i].start) < NODE_MIN_SIZE)
+		if ((nodes[i].end - nodes[i].start) < NODE_MIN_SIZE) {
 			unparse_node(i);
+			node_set_offline(i);
+		}
 	}
 
 	if (acpi_numa <= 0)

block/cfq-iosched.c

@@ -33,7 +33,7 @@ static int cfq_slice_idle = HZ / 70;
 
 #define CFQ_KEY_ASYNC		(0)
 
-static DEFINE_RWLOCK(cfq_exit_lock);
+static DEFINE_SPINLOCK(cfq_exit_lock);
 
 /*
  * for the hash of cfqq inside the cfqd
@@ -1284,7 +1284,7 @@ static void cfq_exit_io_context(struct io_context *ioc)
 	/*
 	 * put the reference this task is holding to the various queues
 	 */
-	read_lock_irqsave(&cfq_exit_lock, flags);
+	spin_lock_irqsave(&cfq_exit_lock, flags);
 
 	n = rb_first(&ioc->cic_root);
 	while (n != NULL) {
@@ -1294,7 +1294,7 @@ static void cfq_exit_io_context(struct io_context *ioc)
 		n = rb_next(n);
 	}
 
-	read_unlock_irqrestore(&cfq_exit_lock, flags);
+	spin_unlock_irqrestore(&cfq_exit_lock, flags);
 }
 
 static struct cfq_io_context *
@@ -1400,17 +1400,17 @@ static int cfq_ioc_set_ioprio(struct io_context *ioc, unsigned int ioprio)
 	struct cfq_io_context *cic;
 	struct rb_node *n;
 
-	write_lock(&cfq_exit_lock);
+	spin_lock(&cfq_exit_lock);
 
 	n = rb_first(&ioc->cic_root);
 	while (n != NULL) {
 		cic = rb_entry(n, struct cfq_io_context, rb_node);
- 
+
 		changed_ioprio(cic);
 		n = rb_next(n);
 	}
 
-	write_unlock(&cfq_exit_lock);
+	spin_unlock(&cfq_exit_lock);
 
 	return 0;
 }
@@ -1475,9 +1475,10 @@ out:
 static void
 cfq_drop_dead_cic(struct io_context *ioc, struct cfq_io_context *cic)
 {
-	read_lock(&cfq_exit_lock);
+	spin_lock(&cfq_exit_lock);
 	rb_erase(&cic->rb_node, &ioc->cic_root);
-	read_unlock(&cfq_exit_lock);
+	list_del_init(&cic->queue_list);
+	spin_unlock(&cfq_exit_lock);
 	kmem_cache_free(cfq_ioc_pool, cic);
 	atomic_dec(&ioc_count);
 }
@@ -1545,11 +1546,11 @@ restart:
 			BUG();
 	}
 
-	read_lock(&cfq_exit_lock);
+	spin_lock(&cfq_exit_lock);
 	rb_link_node(&cic->rb_node, parent, p);
 	rb_insert_color(&cic->rb_node, &ioc->cic_root);
 	list_add(&cic->queue_list, &cfqd->cic_list);
-	read_unlock(&cfq_exit_lock);
+	spin_unlock(&cfq_exit_lock);
 }
 
 /*
@@ -2187,7 +2188,7 @@ static void cfq_exit_queue(elevator_t *e)
 
 	cfq_shutdown_timer_wq(cfqd);
 
-	write_lock(&cfq_exit_lock);
+	spin_lock(&cfq_exit_lock);
 	spin_lock_irq(q->queue_lock);
 
 	if (cfqd->active_queue)
@@ -2210,7 +2211,7 @@ static void cfq_exit_queue(elevator_t *e)
 	}
 
 	spin_unlock_irq(q->queue_lock);
-	write_unlock(&cfq_exit_lock);
+	spin_unlock(&cfq_exit_lock);
 
 	cfq_shutdown_timer_wq(cfqd);
 

block/ll_rw_blk.c

@@ -3452,7 +3452,12 @@ void end_that_request_last(struct request *req, int uptodate)
 	if (unlikely(laptop_mode) && blk_fs_request(req))
 		laptop_io_completion();
 
-	if (disk && blk_fs_request(req)) {
+	/*
+	 * Account IO completion.  bar_rq isn't accounted as a normal
+	 * IO on queueing nor completion.  Accounting the containing
+	 * request is enough.
+	 */
+	if (disk && blk_fs_request(req) && req != &req->q->bar_rq) {
 		unsigned long duration = jiffies - req->start_time;
 		const int rw = rq_data_dir(req);
 

drivers/base/firmware_class.c

@@ -86,18 +86,9 @@ firmware_timeout_store(struct class *class, const char *buf, size_t count)
 static CLASS_ATTR(timeout, 0644, firmware_timeout_show, firmware_timeout_store);
 
 static void  fw_class_dev_release(struct class_device *class_dev);
-int firmware_class_uevent(struct class_device *dev, char **envp,
-			   int num_envp, char *buffer, int buffer_size);
 
-static struct class firmware_class = {
-	.name		= "firmware",
-	.uevent	= firmware_class_uevent,
-	.release	= fw_class_dev_release,
-};
-
-int
-firmware_class_uevent(struct class_device *class_dev, char **envp,
-		       int num_envp, char *buffer, int buffer_size)
+static int firmware_class_uevent(struct class_device *class_dev, char **envp,
+				 int num_envp, char *buffer, int buffer_size)
 {
 	struct firmware_priv *fw_priv = class_get_devdata(class_dev);
 	int i = 0, len = 0;
@@ -116,6 +107,12 @@ firmware_class_uevent(struct class_device *class_dev, char **envp,
 	return 0;
 }
 
+static struct class firmware_class = {
+	.name		= "firmware",
+	.uevent		= firmware_class_uevent,
+	.release	= fw_class_dev_release,
+};
+
 static ssize_t
 firmware_loading_show(struct class_device *class_dev, char *buf)
 {
@@ -493,25 +490,6 @@ release_firmware(const struct firmware *fw)
 	}
 }
 
-/**
- * register_firmware: - provide a firmware image for later usage
- * @name: name of firmware image file
- * @data: buffer pointer for the firmware image
- * @size: size of the data buffer area
- *
- *	Make sure that @data will be available by requesting firmware @name.
- *
- *	Note: This will not be possible until some kind of persistence
- *	is available.
- **/
-void
-register_firmware(const char *name, const u8 *data, size_t size)
-{
-	/* This is meaningless without firmware caching, so until we
-	 * decide if firmware caching is reasonable just leave it as a
-	 * noop */
-}
-
 /* Async support */
 struct firmware_work {
 	struct work_struct work;
@@ -630,4 +608,3 @@ module_exit(firmware_class_exit);
 EXPORT_SYMBOL(release_firmware);
 EXPORT_SYMBOL(request_firmware);
 EXPORT_SYMBOL(request_firmware_nowait);
-EXPORT_SYMBOL(register_firmware);

drivers/base/power/suspend.c

@@ -8,7 +8,6 @@
  *
  */
 
-#include <linux/vt_kern.h>
 #include <linux/device.h>
 #include <linux/kallsyms.h>
 #include <linux/pm.h>
@@ -66,6 +65,7 @@ int suspend_device(struct device * dev, pm_message_t state)
 	return error;
 }
 
+
 /**
  *	device_suspend - Save state and stop all devices in system.
  *	@state:		Power state to put each device in.
@@ -85,9 +85,6 @@ int device_suspend(pm_message_t state)
 {
 	int error = 0;
 
-	if (!is_console_suspend_safe())
-		return -EINVAL;
-
 	down(&dpm_sem);
 	down(&dpm_list_sem);
 	while (!list_empty(&dpm_active) && error == 0) {

drivers/char/agp/Kconfig

@@ -86,7 +86,7 @@ config AGP_NVIDIA
 
 config AGP_SIS
 	tristate "SiS chipset support"
-	depends on AGP && X86_32
+	depends on AGP
 	help
 	  This option gives you AGP support for the GLX component of
 	  X on Silicon Integrated Systems [SiS] chipsets.

drivers/char/agp/amd64-agp.c

@@ -617,6 +617,9 @@ static int agp_amd64_resume(struct pci_dev *pdev)
 	pci_set_power_state(pdev, PCI_D0);
 	pci_restore_state(pdev);
 
+	if (pdev->vendor == PCI_VENDOR_ID_NVIDIA)
+		nforce3_agp_init(pdev);
+
 	return amd_8151_configure();
 }
 

drivers/char/agp/via-agp.c

@@ -345,6 +345,12 @@ static struct agp_device_ids via_agp_device_ids[] __devinitdata =
 		.chipset_name	= "PT880",
 	},
 
+	/* PT880 Ultra */
+	{
+		.device_id	= PCI_DEVICE_ID_VIA_PT880ULTRA,
+		.chipset_name	= "PT880 Ultra",
+	},
+
 	/* PT890 */
 	{
 		.device_id	= PCI_DEVICE_ID_VIA_8783_0,
@@ -511,6 +517,7 @@ static struct pci_device_id agp_via_pci_table[] = {
 	ID(PCI_DEVICE_ID_VIA_8763_0),
 	ID(PCI_DEVICE_ID_VIA_8378_0),
 	ID(PCI_DEVICE_ID_VIA_PT880),
+	ID(PCI_DEVICE_ID_VIA_PT880ULTRA),
 	ID(PCI_DEVICE_ID_VIA_8783_0),
 	ID(PCI_DEVICE_ID_VIA_PX8X0_0),
 	ID(PCI_DEVICE_ID_VIA_3269_0),

drivers/char/ipmi/ipmi_si_intf.c

@@ -1184,20 +1184,20 @@ static void port_outl(struct si_sm_io *io, unsigned int offset,
 static void port_cleanup(struct smi_info *info)
 {
 	unsigned int addr = info->io.addr_data;
-	int          mapsize;
+	int          idx;
 
 	if (addr) {
-		mapsize = ((info->io_size * info->io.regspacing)
-			   - (info->io.regspacing - info->io.regsize));
-
-		release_region (addr, mapsize);
+	  	for (idx = 0; idx < info->io_size; idx++) {
+			release_region(addr + idx * info->io.regspacing,
+				       info->io.regsize);
+		}
 	}
 }
 
 static int port_setup(struct smi_info *info)
 {
 	unsigned int addr = info->io.addr_data;
-	int          mapsize;
+	int          idx;
 
 	if (!addr)
 		return -ENODEV;
@@ -1225,16 +1225,22 @@ static int port_setup(struct smi_info *info)
 		return -EINVAL;
 	}
 
-	/* Calculate the total amount of memory to claim.  This is an
-	 * unusual looking calculation, but it avoids claiming any
-	 * more memory than it has to.  It will claim everything
-	 * between the first address to the end of the last full
-	 * register. */
-	mapsize = ((info->io_size * info->io.regspacing)
-		   - (info->io.regspacing - info->io.regsize));
-
-	if (request_region(addr, mapsize, DEVICE_NAME) == NULL)
-		return -EIO;
+	/* Some BIOSes reserve disjoint I/O regions in their ACPI
+	 * tables.  This causes problems when trying to register the
+	 * entire I/O region.  Therefore we must register each I/O
+	 * port separately.
+	 */
+  	for (idx = 0; idx < info->io_size; idx++) {
+		if (request_region(addr + idx * info->io.regspacing,
+				   info->io.regsize, DEVICE_NAME) == NULL) {
+			/* Undo allocations */
+			while (idx--) {
+				release_region(addr + idx * info->io.regspacing,
+					       info->io.regsize);
+			}
+			return -EIO;
+		}
+	}
 	return 0;
 }
 

drivers/char/tpm/tpm_bios.c

@@ -105,6 +105,12 @@ static const char* tcpa_event_type_strings[] = {
 	"Non-Host Info"
 };
 
+struct tcpa_pc_event {
+	u32 event_id;
+	u32 event_size;
+	u8 event_data[0];
+};
+
 enum tcpa_pc_event_ids {
 	SMBIOS = 1,
 	BIS_CERT,
@@ -114,14 +120,15 @@ enum tcpa_pc_event_ids {
 	NVRAM,
 	OPTION_ROM_EXEC,
 	OPTION_ROM_CONFIG,
-	OPTION_ROM_MICROCODE,
+	OPTION_ROM_MICROCODE = 10,
 	S_CRTM_VERSION,
 	S_CRTM_CONTENTS,
 	POST_CONTENTS,
+	HOST_TABLE_OF_DEVICES,
 };
 
 static const char* tcpa_pc_event_id_strings[] = {
-	""
+	"",
 	"SMBIOS",
 	"BIS Certificate",
 	"POST BIOS ",
@@ -130,11 +137,12 @@ static const char* tcpa_pc_event_id_strings[] = {
 	"NVRAM",
 	"Option ROM",
 	"Option ROM config",
-	"Option ROM microcode",
+	"",
+	"Option ROM microcode ",
 	"S-CRTM Version",
-	"S-CRTM Contents",
-	"S-CRTM POST Contents",
-	"POST Contents",
+	"S-CRTM Contents ",
+	"POST Contents ",
+	"Table of Devices",
 };
 
 /* returns pointer to start of pos. entry of tcg log */
@@ -206,7 +214,7 @@ static int get_event_name(char *dest, struct tcpa_event *event,
 	const char *name = "";
 	char data[40] = "";
 	int i, n_len = 0, d_len = 0;
-	u32 event_id;
+	struct tcpa_pc_event *pc_event;
 
 	switch(event->event_type) {
 	case PREBOOT:
@@ -235,31 +243,32 @@ static int get_event_name(char *dest, struct tcpa_event *event,
 		}
 		break;
 	case EVENT_TAG:
-		event_id = be32_to_cpu(*((u32 *)event_entry));
+		pc_event = (struct tcpa_pc_event *)event_entry;
 
 		/* ToDo Row data -> Base64 */
 
-		switch (event_id) {
+		switch (pc_event->event_id) {
 		case SMBIOS:
 		case BIS_CERT:
 		case CMOS:
 		case NVRAM:
 		case OPTION_ROM_EXEC:
 		case OPTION_ROM_CONFIG:
-		case OPTION_ROM_MICROCODE:
 		case S_CRTM_VERSION:
-		case S_CRTM_CONTENTS:
-		case POST_CONTENTS:
-			name = tcpa_pc_event_id_strings[event_id];
+			name = tcpa_pc_event_id_strings[pc_event->event_id];
 			n_len = strlen(name);
 			break;
+		/* hash data */
 		case POST_BIOS_ROM:
 		case ESCD:
-			name = tcpa_pc_event_id_strings[event_id];
+		case OPTION_ROM_MICROCODE:
+		case S_CRTM_CONTENTS:
+		case POST_CONTENTS:
+			name = tcpa_pc_event_id_strings[pc_event->event_id];
 			n_len = strlen(name);
 			for (i = 0; i < 20; i++)
-				d_len += sprintf(data, "%02x",
-						event_entry[8 + i]);
+				d_len += sprintf(&data[2*i], "%02x",
+						pc_event->event_data[i]);
 			break;
 		default:
 			break;
@@ -275,53 +284,13 @@ static int get_event_name(char *dest, struct tcpa_event *event,
 
 static int tpm_binary_bios_measurements_show(struct seq_file *m, void *v)
 {
+	struct tcpa_event *event = v;
+	char *data = v;
+	int i;
 
-	char *eventname;
-	char data[4];
-	u32 help;
-	int i, len;
-	struct tcpa_event *event = (struct tcpa_event *) v;
-	unsigned char *event_entry =
-	    (unsigned char *) (v + sizeof(struct tcpa_event));
-
-	eventname = kmalloc(MAX_TEXT_EVENT, GFP_KERNEL);
-	if (!eventname) {
-		printk(KERN_ERR "%s: ERROR - No Memory for event name\n ",
-		       __func__);
-		return -ENOMEM;
-	}
-
-	/* 1st: PCR used is in little-endian format (4 bytes) */
-	help = le32_to_cpu(event->pcr_index);
-	memcpy(data, &help, 4);
-	for (i = 0; i < 4; i++)
-		seq_putc(m, data[i]);
-
-	/* 2nd: SHA1 (20 bytes) */
-	for (i = 0; i < 20; i++)
-		seq_putc(m, event->pcr_value[i]);
-
-	/* 3rd: event type identifier (4 bytes) */
-	help = le32_to_cpu(event->event_type);
-	memcpy(data, &help, 4);
-	for (i = 0; i < 4; i++)
+	for (i = 0; i < sizeof(struct tcpa_event) + event->event_size; i++)
 		seq_putc(m, data[i]);
 
-	len = 0;
-
-	len += get_event_name(eventname, event, event_entry);
-
-	/* 4th:  filename <= 255 + \'0' delimiter */
-	if (len > TCG_EVENT_NAME_LEN_MAX)
-		len = TCG_EVENT_NAME_LEN_MAX;
-
-	for (i = 0; i < len; i++)
-		seq_putc(m, eventname[i]);
-
-	/* 5th: delimiter */
-	seq_putc(m, '\0');
-
-	kfree(eventname);
 	return 0;
 }
 

drivers/char/tpm/tpm_tis.c

@@ -457,10 +457,6 @@ static int __devinit tpm_tis_pnp_init(struct pnp_dev *pnp_dev,
 	}
 
 	vendor = ioread32(chip->vendor.iobase + TPM_DID_VID(0));
-	if ((vendor & 0xFFFF) == 0xFFFF) {
-		rc = -ENODEV;
-		goto out_err;
-	}
 
 	/* Default timeouts */
 	chip->vendor.timeout_a = msecs_to_jiffies(TIS_SHORT_TIMEOUT);

drivers/char/tty_io.c

@@ -398,7 +398,7 @@ int tty_insert_flip_string_flags(struct tty_struct *tty,
 	while (unlikely(size > copied));
 	return copied;
 }
-EXPORT_SYMBOL_GPL(tty_insert_flip_string_flags);
+EXPORT_SYMBOL(tty_insert_flip_string_flags);
 
 void tty_schedule_flip(struct tty_struct *tty)
 {

drivers/char/vt.c

@@ -3238,14 +3238,6 @@ void vcs_scr_writew(struct vc_data *vc, u16 val, u16 *org)
 	}
 }
 
-int is_console_suspend_safe(void)
-{
-	/* It is unsafe to suspend devices while X has control of the
-	 * hardware. Make sure we are running on a kernel-controlled console.
-	 */
-	return vc_cons[fg_console].d->vc_mode == KD_TEXT;
-}
-
 /*
  *	Visible symbols for modules
  */

drivers/char/watchdog/i8xx_tco.c

@@ -33,11 +33,6 @@
  *	82801E   (C-ICH)  : document number 273599-001, 273645-002,
  *	82801EB  (ICH5)   : document number 252516-001, 252517-003,
  *	82801ER  (ICH5R)  : document number 252516-001, 252517-003,
- *	82801FB  (ICH6)   : document number 301473-002, 301474-007,
- *	82801FR  (ICH6R)  : document number 301473-002, 301474-007,
- *	82801FBM (ICH6-M) : document number 301473-002, 301474-007,
- *	82801FW  (ICH6W)  : document number 301473-001, 301474-007,
- *	82801FRW (ICH6RW) : document number 301473-001, 301474-007
  *
  *  20000710 Nils Faerber
  *	Initial Version 0.01
@@ -66,6 +61,10 @@
  *  20050807 Wim Van Sebroeck <wim@iguana.be>
  *	0.08 Make sure that the watchdog is only "armed" when started.
  *	     (Kernel Bug 4251)
+ *  20060416 Wim Van Sebroeck <wim@iguana.be>
+ *	0.09 Remove support for the ICH6, ICH6R, ICH6-M, ICH6W and ICH6RW and
+ *	     ICH7 chipsets. (See Kernel Bug 6031 - other code will support these
+ *	     chipsets)
  */
 
 /*
@@ -90,7 +89,7 @@
 #include "i8xx_tco.h"
 
 /* Module and version information */
-#define TCO_VERSION "0.08"
+#define TCO_VERSION "0.09"
 #define TCO_MODULE_NAME "i8xx TCO timer"
 #define TCO_DRIVER_NAME   TCO_MODULE_NAME ", v" TCO_VERSION
 #define PFX TCO_MODULE_NAME ": "
@@ -391,11 +390,6 @@ static struct pci_device_id i8xx_tco_pci_tbl[] = {
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12,	PCI_ANY_ID, PCI_ANY_ID, },
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801E_0,	PCI_ANY_ID, PCI_ANY_ID, },
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0,	PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0,	PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1,	PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_2,	PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0,	PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1,	PCI_ANY_ID, PCI_ANY_ID, },
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1,	PCI_ANY_ID, PCI_ANY_ID, },
 	{ 0, },			/* End of list */
 };

drivers/char/watchdog/s3c2410_wdt.c

@@ -423,6 +423,12 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
 	if (tmr_atboot && started == 0) {
 		printk(KERN_INFO PFX "Starting Watchdog Timer\n");
 		s3c2410wdt_start();
+	} else if (!tmr_atboot) {
+		/* if we're not enabling the watchdog, then ensure it is
+		 * disabled if it has been left running from the bootloader
+		 * or other source */
+
+		s3c2410wdt_stop();
 	}
 
 	return 0;

drivers/char/watchdog/sc1200wdt.c

@@ -377,7 +377,7 @@ static int __init sc1200wdt_init(void)
 {
 	int ret;
 
-	printk(banner);
+	printk("%s\n", banner);
 
 	spin_lock_init(&sc1200wdt_lock);
 	sema_init(&open_sem, 1);

drivers/i2c/busses/scx200_acb.c

@@ -491,7 +491,7 @@ static struct pci_device_id divil_pci[] = {
 
 #define MSR_LBAR_SMB		0x5140000B
 
-static int scx200_add_cs553x(void)
+static __init int scx200_add_cs553x(void)
 {
 	u32	low, hi;
 	u32	smb_base;

drivers/ide/pci/sgiioc4.c

@@ -345,17 +345,17 @@ sgiioc4_resetproc(ide_drive_t * drive)
 static u8
 sgiioc4_INB(unsigned long port)
 {
-	u8 reg = (u8) inb(port);
+	u8 reg = (u8) readb((void __iomem *) port);
 
 	if ((port & 0xFFF) == 0x11C) {	/* Status register of IOC4 */
 		if (reg & 0x51) {	/* Not busy...check for interrupt */
 			unsigned long other_ir = port - 0x110;
-			unsigned int intr_reg = (u32) inl(other_ir);
+			unsigned int intr_reg = (u32) readl((void __iomem *) other_ir);
 
 			/* Clear the Interrupt, Error bits on the IOC4 */
 			if (intr_reg & 0x03) {
-				outl(0x03, other_ir);
-				intr_reg = (u32) inl(other_ir);
+				writel(0x03, (void __iomem *) other_ir);
+				intr_reg = (u32) readl((void __iomem *) other_ir);
 			}
 		}
 	}
@@ -606,6 +606,12 @@ ide_init_sgiioc4(ide_hwif_t * hwif)
 	hwif->ide_dma_host_off = &sgiioc4_ide_dma_host_off;
 	hwif->ide_dma_lostirq = &sgiioc4_ide_dma_lostirq;
 	hwif->ide_dma_timeout = &__ide_dma_timeout;
+
+	/*
+	 * The IOC4 uses MMIO rather than Port IO.
+	 * It also needs special workarounds for INB.
+	 */
+	default_hwif_mmiops(hwif);
 	hwif->INB = &sgiioc4_INB;
 }
 
@@ -743,6 +749,6 @@ ioc4_ide_exit(void)
 module_init(ioc4_ide_init);
 module_exit(ioc4_ide_exit);
 
-MODULE_AUTHOR("Aniket Malatpure - Silicon Graphics Inc. (SGI)");
+MODULE_AUTHOR("Aniket Malatpure/Jeremy Higdon");
 MODULE_DESCRIPTION("IDE PCI driver module for SGI IOC4 Base-IO Card");
 MODULE_LICENSE("GPL");

drivers/ide/ppc/pmac.c

@@ -553,6 +553,8 @@ pmac_ide_init_hwif_ports(hw_regs_t *hw,
 
 	if (irq != NULL)
 		*irq = pmac_ide[ix].irq;
+
+	hw->dev = &pmac_ide[ix].mdev->ofdev.dev;
 }
 
 #define PMAC_IDE_REG(x) ((void __iomem *)(IDE_DATA_REG+(x)))

drivers/infiniband/core/uverbs_mem.c

@@ -211,8 +211,10 @@ void ib_umem_release_on_close(struct ib_device *dev, struct ib_umem *umem)
 	 */
 
 	work = kmalloc(sizeof *work, GFP_KERNEL);
-	if (!work)
+	if (!work) {
+		mmput(mm);
 		return;
+	}
 
 	INIT_WORK(&work->work, ib_umem_account, work);
 	work->mm   = mm;

drivers/infiniband/hw/ipath/ipath_driver.c

@@ -1905,19 +1905,19 @@ static void __exit infinipath_cleanup(void)
 			} else
 				ipath_dbg("irq is 0, not doing free_irq "
 					  "for unit %u\n", dd->ipath_unit);
-			dd->pcidev = NULL;
-		}
 
-		/*
-		 * we check for NULL here, because it's outside the kregbase
-		 * check, and we need to call it after the free_irq.  Thus
-		 * it's possible that the function pointers were never
-		 * initialized.
-		 */
-		if (dd->ipath_f_cleanup)
-			/* clean up chip-specific stuff */
-			dd->ipath_f_cleanup(dd);
+			/*
+			 * we check for NULL here, because it's outside
+			 * the kregbase check, and we need to call it
+			 * after the free_irq.  Thus it's possible that
+			 * the function pointers were never initialized.
+			 */
+			if (dd->ipath_f_cleanup)
+				/* clean up chip-specific stuff */
+				dd->ipath_f_cleanup(dd);
 
+			dd->pcidev = NULL;
+		}
 		spin_lock_irqsave(&ipath_devs_lock, flags);
 	}
 

drivers/infiniband/hw/ipath/ipath_eeprom.c

@@ -505,11 +505,10 @@ static u8 flash_csum(struct ipath_flash *ifp, int adjust)
  * ipath_get_guid - get the GUID from the i2c device
  * @dd: the infinipath device
  *
- * When we add the multi-chip support, we will probably have to add
- * the ability to use the number of guids field, and get the guid from
- * the first chip's flash, to use for all of them.
+ * We have the capability to use the ipath_nguid field, and get
+ * the guid from the first chip's flash, to use for all of them.
  */
-void ipath_get_guid(struct ipath_devdata *dd)
+void ipath_get_eeprom_info(struct ipath_devdata *dd)
 {
 	void *buf;
 	struct ipath_flash *ifp;

drivers/infiniband/hw/ipath/ipath_file_ops.c

@@ -139,7 +139,7 @@ static int ipath_get_base_info(struct ipath_portdata *pd,
 	kinfo->spi_piosize = dd->ipath_ibmaxlen;
 	kinfo->spi_mtu = dd->ipath_ibmaxlen;	/* maxlen, not ibmtu */
 	kinfo->spi_port = pd->port_port;
-	kinfo->spi_sw_version = IPATH_USER_SWVERSION;
+	kinfo->spi_sw_version = IPATH_KERN_SWVERSION;
 	kinfo->spi_hw_version = dd->ipath_revision;
 
 	if (copy_to_user(ubase, kinfo, sizeof(*kinfo)))
@@ -1224,6 +1224,10 @@ static unsigned int ipath_poll(struct file *fp,
 
 	if (tail == head) {
 		set_bit(IPATH_PORT_WAITING_RCV, &pd->port_flag);
+		if(dd->ipath_rhdrhead_intr_off) /* arm rcv interrupt */
+			(void)ipath_write_ureg(dd, ur_rcvhdrhead,
+					       dd->ipath_rhdrhead_intr_off
+					       | head, pd->port_port);
 		poll_wait(fp, &pd->port_wait, pt);
 
 		if (test_bit(IPATH_PORT_WAITING_RCV, &pd->port_flag)) {

drivers/infiniband/hw/ipath/ipath_ht400.c

@@ -607,7 +607,12 @@ static int ipath_ht_boardname(struct ipath_devdata *dd, char *name,
 	case 4:		/* Ponderosa is one of the bringup boards */
 		n = "Ponderosa";
 		break;
-	case 5:		/* HT-460 original production board */
+	case 5:
+		/*
+		 * HT-460 original production board; two production levels, with
+		 * different serial number ranges.   See ipath_ht_early_init() for
+		 * case where we enable IPATH_GPIO_INTR for later serial # range.
+		 */
 		n = "InfiniPath_HT-460";
 		break;
 	case 6:
@@ -642,7 +647,7 @@ static int ipath_ht_boardname(struct ipath_devdata *dd, char *name,
 	if (n)
 		snprintf(name, namelen, "%s", n);
 
-	if (dd->ipath_majrev != 3 || dd->ipath_minrev != 2) {
+	if (dd->ipath_majrev != 3 || (dd->ipath_minrev < 2 || dd->ipath_minrev > 3)) {
 		/*
 		 * This version of the driver only supports the HT-400
 		 * Rev 3.2
@@ -1520,6 +1525,18 @@ static int ipath_ht_early_init(struct ipath_devdata *dd)
 	 */
 	ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
 			 INFINIPATH_S_ABORT);
+
+	ipath_get_eeprom_info(dd);
+	if(dd->ipath_boardrev == 5 && dd->ipath_serial[0] == '1' &&
+		dd->ipath_serial[1] == '2' && dd->ipath_serial[2] == '8') {
+		/*
+		 * Later production HT-460 has same changes as HT-465, so
+		 * can use GPIO interrupts.  They have serial #'s starting
+		 * with 128, rather than 112.
+		 */
+		dd->ipath_flags |= IPATH_GPIO_INTR;
+		dd->ipath_flags &= ~IPATH_POLL_RX_INTR;
+	}
 	return 0;
 }
 

drivers/infiniband/hw/ipath/ipath_init_chip.c

@@ -879,7 +879,6 @@ int ipath_init_chip(struct ipath_devdata *dd, int reinit)
 
 done:
 	if (!ret) {
-		ipath_get_guid(dd);
 		*dd->ipath_statusp |= IPATH_STATUS_CHIP_PRESENT;
 		if (!dd->ipath_f_intrsetup(dd)) {
 			/* now we can enable all interrupts from the chip */

drivers/infiniband/hw/ipath/ipath_kernel.h

@@ -650,7 +650,7 @@ u32 __iomem *ipath_getpiobuf(struct ipath_devdata *, u32 *);
 void ipath_init_pe800_funcs(struct ipath_devdata *);
 /* init HT-400-specific func */
 void ipath_init_ht400_funcs(struct ipath_devdata *);
-void ipath_get_guid(struct ipath_devdata *);
+void ipath_get_eeprom_info(struct ipath_devdata *);
 u64 ipath_snap_cntr(struct ipath_devdata *, ipath_creg);
 
 /*

drivers/infiniband/hw/ipath/ipath_keys.c

@@ -136,9 +136,7 @@ int ipath_lkey_ok(struct ipath_lkey_table *rkt, struct ipath_sge *isge,
 		ret = 1;
 		goto bail;
 	}
-	spin_lock(&rkt->lock);
 	mr = rkt->table[(sge->lkey >> (32 - ib_ipath_lkey_table_size))];
-	spin_unlock(&rkt->lock);
 	if (unlikely(mr == NULL || mr->lkey != sge->lkey)) {
 		ret = 0;
 		goto bail;
@@ -184,8 +182,6 @@ bail:
  * @acc: access flags
  *
  * Return 1 if successful, otherwise 0.
- *
- * The QP r_rq.lock should be held.
  */
 int ipath_rkey_ok(struct ipath_ibdev *dev, struct ipath_sge_state *ss,
 		  u32 len, u64 vaddr, u32 rkey, int acc)
@@ -196,9 +192,7 @@ int ipath_rkey_ok(struct ipath_ibdev *dev, struct ipath_sge_state *ss,
 	size_t off;
 	int ret;
 
-	spin_lock(&rkt->lock);
 	mr = rkt->table[(rkey >> (32 - ib_ipath_lkey_table_size))];
-	spin_unlock(&rkt->lock);
 	if (unlikely(mr == NULL || mr->lkey != rkey)) {
 		ret = 0;
 		goto bail;

drivers/infiniband/hw/ipath/ipath_layer.c

@@ -872,12 +872,13 @@ static void copy_io(u32 __iomem *piobuf, struct ipath_sge_state *ss,
 		update_sge(ss, len);
 		length -= len;
 	}
+	/* Update address before sending packet. */
+	update_sge(ss, length);
 	/* must flush early everything before trigger word */
 	ipath_flush_wc();
 	__raw_writel(last, piobuf);
 	/* be sure trigger word is written */
 	ipath_flush_wc();
-	update_sge(ss, length);
 }
 
 /**
@@ -943,17 +944,18 @@ int ipath_verbs_send(struct ipath_devdata *dd, u32 hdrwords,
 	if (likely(ss->num_sge == 1 && len <= ss->sge.length &&
 		   !((unsigned long)ss->sge.vaddr & (sizeof(u32) - 1)))) {
 		u32 w;
+		u32 *addr = (u32 *) ss->sge.vaddr;
 
+		/* Update address before sending packet. */
+		update_sge(ss, len);
 		/* Need to round up for the last dword in the packet. */
 		w = (len + 3) >> 2;
-		__iowrite32_copy(piobuf, ss->sge.vaddr, w - 1);
+		__iowrite32_copy(piobuf, addr, w - 1);
 		/* must flush early everything before trigger word */
 		ipath_flush_wc();
-		__raw_writel(((u32 *) ss->sge.vaddr)[w - 1],
-			     piobuf + w - 1);
+		__raw_writel(addr[w - 1], piobuf + w - 1);
 		/* be sure trigger word is written */
 		ipath_flush_wc();
-		update_sge(ss, len);
 		ret = 0;
 		goto bail;
 	}

drivers/infiniband/hw/ipath/ipath_pe800.c

@@ -1180,6 +1180,8 @@ static int ipath_pe_early_init(struct ipath_devdata *dd)
 	 */
 	dd->ipath_rhdrhead_intr_off = 1ULL<<32;
 
+	ipath_get_eeprom_info(dd);
+
 	return 0;
 }
 

drivers/infiniband/hw/ipath/ipath_qp.c

@@ -375,10 +375,10 @@ static void ipath_error_qp(struct ipath_qp *qp)
 
 	spin_lock(&dev->pending_lock);
 	/* XXX What if its already removed by the timeout code? */
-	if (qp->timerwait.next != LIST_POISON1)
-		list_del(&qp->timerwait);
-	if (qp->piowait.next != LIST_POISON1)
-		list_del(&qp->piowait);
+	if (!list_empty(&qp->timerwait))
+		list_del_init(&qp->timerwait);
+	if (!list_empty(&qp->piowait))
+		list_del_init(&qp->piowait);
 	spin_unlock(&dev->pending_lock);
 
 	wc.status = IB_WC_WR_FLUSH_ERR;
@@ -427,6 +427,7 @@ static void ipath_error_qp(struct ipath_qp *qp)
 int ipath_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 		    int attr_mask)
 {
+	struct ipath_ibdev *dev = to_idev(ibqp->device);
 	struct ipath_qp *qp = to_iqp(ibqp);
 	enum ib_qp_state cur_state, new_state;
 	unsigned long flags;
@@ -443,6 +444,19 @@ int ipath_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 				attr_mask))
 		goto inval;
 
+	if (attr_mask & IB_QP_AV)
+		if (attr->ah_attr.dlid == 0 ||
+		    attr->ah_attr.dlid >= IPS_MULTICAST_LID_BASE)
+			goto inval;
+
+	if (attr_mask & IB_QP_PKEY_INDEX)
+		if (attr->pkey_index >= ipath_layer_get_npkeys(dev->dd))
+			goto inval;
+
+	if (attr_mask & IB_QP_MIN_RNR_TIMER)
+		if (attr->min_rnr_timer > 31)
+			goto inval;
+
 	switch (new_state) {
 	case IB_QPS_RESET:
 		ipath_reset_qp(qp);
@@ -457,13 +471,8 @@ int ipath_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 
 	}
 
-	if (attr_mask & IB_QP_PKEY_INDEX) {
-		struct ipath_ibdev *dev = to_idev(ibqp->device);
-
-		if (attr->pkey_index >= ipath_layer_get_npkeys(dev->dd))
-			goto inval;
+	if (attr_mask & IB_QP_PKEY_INDEX)
 		qp->s_pkey_index = attr->pkey_index;
-	}
 
 	if (attr_mask & IB_QP_DEST_QPN)
 		qp->remote_qpn = attr->dest_qp_num;
@@ -479,12 +488,8 @@ int ipath_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 	if (attr_mask & IB_QP_ACCESS_FLAGS)
 		qp->qp_access_flags = attr->qp_access_flags;
 
-	if (attr_mask & IB_QP_AV) {
-		if (attr->ah_attr.dlid == 0 ||
-		    attr->ah_attr.dlid >= IPS_MULTICAST_LID_BASE)
-			goto inval;
+	if (attr_mask & IB_QP_AV)
 		qp->remote_ah_attr = attr->ah_attr;
-	}
 
 	if (attr_mask & IB_QP_PATH_MTU)
 		qp->path_mtu = attr->path_mtu;
@@ -499,11 +504,8 @@ int ipath_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 		qp->s_rnr_retry_cnt = qp->s_rnr_retry;
 	}
 
-	if (attr_mask & IB_QP_MIN_RNR_TIMER) {
-		if (attr->min_rnr_timer > 31)
-			goto inval;
+	if (attr_mask & IB_QP_MIN_RNR_TIMER)
 		qp->s_min_rnr_timer = attr->min_rnr_timer;
-	}
 
 	if (attr_mask & IB_QP_QKEY)
 		qp->qkey = attr->qkey;
@@ -710,10 +712,8 @@ struct ib_qp *ipath_create_qp(struct ib_pd *ibpd,
 			     init_attr->qp_type == IB_QPT_RC ?
 			     ipath_do_rc_send : ipath_do_uc_send,
 			     (unsigned long)qp);
-		qp->piowait.next = LIST_POISON1;
-		qp->piowait.prev = LIST_POISON2;
-		qp->timerwait.next = LIST_POISON1;
-		qp->timerwait.prev = LIST_POISON2;
+		INIT_LIST_HEAD(&qp->piowait);
+		INIT_LIST_HEAD(&qp->timerwait);
 		qp->state = IB_QPS_RESET;
 		qp->s_wq = swq;
 		qp->s_size = init_attr->cap.max_send_wr + 1;
@@ -734,7 +734,7 @@ struct ib_qp *ipath_create_qp(struct ib_pd *ibpd,
 		ipath_reset_qp(qp);
 
 		/* Tell the core driver that the kernel SMA is present. */
-		if (qp->ibqp.qp_type == IB_QPT_SMI)
+		if (init_attr->qp_type == IB_QPT_SMI)
 			ipath_layer_set_verbs_flags(dev->dd,
 						    IPATH_VERBS_KERNEL_SMA);
 		break;
@@ -783,10 +783,10 @@ int ipath_destroy_qp(struct ib_qp *ibqp)
 
 	/* Make sure the QP isn't on the timeout list. */
 	spin_lock_irqsave(&dev->pending_lock, flags);
-	if (qp->timerwait.next != LIST_POISON1)
-		list_del(&qp->timerwait);
-	if (qp->piowait.next != LIST_POISON1)
-		list_del(&qp->piowait);
+	if (!list_empty(&qp->timerwait))
+		list_del_init(&qp->timerwait);
+	if (!list_empty(&qp->piowait))
+		list_del_init(&qp->piowait);
 	spin_unlock_irqrestore(&dev->pending_lock, flags);
 
 	/*
@@ -855,10 +855,10 @@ void ipath_sqerror_qp(struct ipath_qp *qp, struct ib_wc *wc)
 
 	spin_lock(&dev->pending_lock);
 	/* XXX What if its already removed by the timeout code? */
-	if (qp->timerwait.next != LIST_POISON1)
-		list_del(&qp->timerwait);
-	if (qp->piowait.next != LIST_POISON1)
-		list_del(&qp->piowait);
+	if (!list_empty(&qp->timerwait))
+		list_del_init(&qp->timerwait);
+	if (!list_empty(&qp->piowait))
+		list_del_init(&qp->piowait);
 	spin_unlock(&dev->pending_lock);
 
 	ipath_cq_enter(to_icq(qp->ibqp.send_cq), wc, 1);

drivers/infiniband/hw/ipath/ipath_rc.c

@@ -57,7 +57,7 @@ static void ipath_init_restart(struct ipath_qp *qp, struct ipath_swqe *wqe)
 	qp->s_len = wqe->length - len;
 	dev = to_idev(qp->ibqp.device);
 	spin_lock(&dev->pending_lock);
-	if (qp->timerwait.next == LIST_POISON1)
+	if (list_empty(&qp->timerwait))
 		list_add_tail(&qp->timerwait,
 			      &dev->pending[dev->pending_index]);
 	spin_unlock(&dev->pending_lock);
@@ -356,7 +356,7 @@ static inline int ipath_make_rc_req(struct ipath_qp *qp,
 		if ((int)(qp->s_psn - qp->s_next_psn) > 0)
 			qp->s_next_psn = qp->s_psn;
 		spin_lock(&dev->pending_lock);
-		if (qp->timerwait.next == LIST_POISON1)
+		if (list_empty(&qp->timerwait))
 			list_add_tail(&qp->timerwait,
 				      &dev->pending[dev->pending_index]);
 		spin_unlock(&dev->pending_lock);
@@ -726,8 +726,8 @@ void ipath_restart_rc(struct ipath_qp *qp, u32 psn, struct ib_wc *wc)
 	 */
 	dev = to_idev(qp->ibqp.device);
 	spin_lock(&dev->pending_lock);
-	if (qp->timerwait.next != LIST_POISON1)
-		list_del(&qp->timerwait);
+	if (!list_empty(&qp->timerwait))
+		list_del_init(&qp->timerwait);
 	spin_unlock(&dev->pending_lock);
 
 	if (wqe->wr.opcode == IB_WR_RDMA_READ)
@@ -886,8 +886,8 @@ static int do_rc_ack(struct ipath_qp *qp, u32 aeth, u32 psn, int opcode)
 	 * just won't find anything to restart if we ACK everything.
 	 */
 	spin_lock(&dev->pending_lock);
-	if (qp->timerwait.next != LIST_POISON1)
-		list_del(&qp->timerwait);
+	if (!list_empty(&qp->timerwait))
+		list_del_init(&qp->timerwait);
 	spin_unlock(&dev->pending_lock);
 
 	/*
@@ -1194,8 +1194,7 @@ static inline void ipath_rc_rcv_resp(struct ipath_ibdev *dev,
 		     IB_WR_RDMA_READ))
 		goto ack_done;
 	spin_lock(&dev->pending_lock);
-	if (qp->s_rnr_timeout == 0 &&
-	    qp->timerwait.next != LIST_POISON1)
+	if (qp->s_rnr_timeout == 0 && !list_empty(&qp->timerwait))
 		list_move_tail(&qp->timerwait,
 			       &dev->pending[dev->pending_index]);
 	spin_unlock(&dev->pending_lock);

drivers/infiniband/hw/ipath/ipath_ruc.c

@@ -435,7 +435,7 @@ void ipath_no_bufs_available(struct ipath_qp *qp, struct ipath_ibdev *dev)
 	unsigned long flags;
 
 	spin_lock_irqsave(&dev->pending_lock, flags);
-	if (qp->piowait.next == LIST_POISON1)
+	if (list_empty(&qp->piowait))
 		list_add_tail(&qp->piowait, &dev->piowait);
 	spin_unlock_irqrestore(&dev->pending_lock, flags);
 	/*

drivers/infiniband/hw/ipath/ipath_verbs.c

@@ -464,7 +464,7 @@ static void ipath_ib_timer(void *arg)
 	last = &dev->pending[dev->pending_index];
 	while (!list_empty(last)) {
 		qp = list_entry(last->next, struct ipath_qp, timerwait);
-		list_del(&qp->timerwait);
+		list_del_init(&qp->timerwait);
 		qp->timer_next = resend;
 		resend = qp;
 		atomic_inc(&qp->refcount);
@@ -474,7 +474,7 @@ static void ipath_ib_timer(void *arg)
 		qp = list_entry(last->next, struct ipath_qp, timerwait);
 		if (--qp->s_rnr_timeout == 0) {
 			do {
-				list_del(&qp->timerwait);
+				list_del_init(&qp->timerwait);
 				tasklet_hi_schedule(&qp->s_task);
 				if (list_empty(last))
 					break;
@@ -554,7 +554,7 @@ static int ipath_ib_piobufavail(void *arg)
 	while (!list_empty(&dev->piowait)) {
 		qp = list_entry(dev->piowait.next, struct ipath_qp,
 				piowait);
-		list_del(&qp->piowait);
+		list_del_init(&qp->piowait);
 		tasklet_hi_schedule(&qp->s_task);
 	}
 	spin_unlock_irqrestore(&dev->pending_lock, flags);
@@ -951,6 +951,7 @@ static void *ipath_register_ib_device(int unit, struct ipath_devdata *dd)
 	idev->dd = dd;
 
 	strlcpy(dev->name, "ipath%d", IB_DEVICE_NAME_MAX);
+	dev->owner = THIS_MODULE;
 	dev->node_guid = ipath_layer_get_guid(dd);
 	dev->uverbs_abi_ver = IPATH_UVERBS_ABI_VERSION;
 	dev->uverbs_cmd_mask =

drivers/infiniband/hw/mthca/mthca_cmd.c

@@ -182,7 +182,7 @@ struct mthca_cmd_context {
 	u8                status;
 };
 
-static int fw_cmd_doorbell = 1;
+static int fw_cmd_doorbell = 0;
 module_param(fw_cmd_doorbell, int, 0644);
 MODULE_PARM_DESC(fw_cmd_doorbell, "post FW commands through doorbell page if nonzero "
 		 "(and supported by FW)");

drivers/infiniband/hw/mthca/mthca_qp.c

@@ -1727,23 +1727,7 @@ int mthca_tavor_post_receive(struct ib_qp *ibqp, struct ib_recv_wr *wr,
 
 	ind = qp->rq.next_ind;
 
-	for (nreq = 0; wr; ++nreq, wr = wr->next) {
-		if (unlikely(nreq == MTHCA_TAVOR_MAX_WQES_PER_RECV_DB)) {
-			nreq = 0;
-
-			doorbell[0] = cpu_to_be32((qp->rq.next_ind << qp->rq.wqe_shift) | size0);
-			doorbell[1] = cpu_to_be32(qp->qpn << 8);
-
-			wmb();
-
-			mthca_write64(doorbell,
-				      dev->kar + MTHCA_RECEIVE_DOORBELL,
-				      MTHCA_GET_DOORBELL_LOCK(&dev->doorbell_lock));
-
-			qp->rq.head += MTHCA_TAVOR_MAX_WQES_PER_RECV_DB;
-			size0 = 0;
-		}
-
+	for (nreq = 0; wr; wr = wr->next) {
 		if (mthca_wq_overflow(&qp->rq, nreq, qp->ibqp.recv_cq)) {
 			mthca_err(dev, "RQ %06x full (%u head, %u tail,"
 					" %d max, %d nreq)\n", qp->qpn,
@@ -1797,6 +1781,23 @@ int mthca_tavor_post_receive(struct ib_qp *ibqp, struct ib_recv_wr *wr,
 		++ind;
 		if (unlikely(ind >= qp->rq.max))
 			ind -= qp->rq.max;
+
+		++nreq;
+		if (unlikely(nreq == MTHCA_TAVOR_MAX_WQES_PER_RECV_DB)) {
+			nreq = 0;
+
+			doorbell[0] = cpu_to_be32((qp->rq.next_ind << qp->rq.wqe_shift) | size0);
+			doorbell[1] = cpu_to_be32(qp->qpn << 8);
+
+			wmb();
+
+			mthca_write64(doorbell,
+				      dev->kar + MTHCA_RECEIVE_DOORBELL,
+				      MTHCA_GET_DOORBELL_LOCK(&dev->doorbell_lock));
+
+			qp->rq.head += MTHCA_TAVOR_MAX_WQES_PER_RECV_DB;
+			size0 = 0;
+		}
 	}
 
 out:

drivers/infiniband/hw/mthca/mthca_srq.c

@@ -490,26 +490,7 @@ int mthca_tavor_post_srq_recv(struct ib_srq *ibsrq, struct ib_recv_wr *wr,
 
 	first_ind = srq->first_free;
 
-	for (nreq = 0; wr; ++nreq, wr = wr->next) {
-		if (unlikely(nreq == MTHCA_TAVOR_MAX_WQES_PER_RECV_DB)) {
-			nreq = 0;
-
-			doorbell[0] = cpu_to_be32(first_ind << srq->wqe_shift);
-			doorbell[1] = cpu_to_be32(srq->srqn << 8);
-
-			/*
-			 * Make sure that descriptors are written
-			 * before doorbell is rung.
-			 */
-			wmb();
-
-			mthca_write64(doorbell,
-				      dev->kar + MTHCA_RECEIVE_DOORBELL,
-				      MTHCA_GET_DOORBELL_LOCK(&dev->doorbell_lock));
-
-			first_ind = srq->first_free;
-		}
-
+	for (nreq = 0; wr; wr = wr->next) {
 		ind = srq->first_free;
 
 		if (ind < 0) {
@@ -569,6 +550,26 @@ int mthca_tavor_post_srq_recv(struct ib_srq *ibsrq, struct ib_recv_wr *wr,
 
 		srq->wrid[ind]  = wr->wr_id;
 		srq->first_free = next_ind;
+
+		++nreq;
+		if (unlikely(nreq == MTHCA_TAVOR_MAX_WQES_PER_RECV_DB)) {
+			nreq = 0;
+
+			doorbell[0] = cpu_to_be32(first_ind << srq->wqe_shift);
+			doorbell[1] = cpu_to_be32(srq->srqn << 8);
+
+			/*
+			 * Make sure that descriptors are written
+			 * before doorbell is rung.
+			 */
+			wmb();
+
+			mthca_write64(doorbell,
+				      dev->kar + MTHCA_RECEIVE_DOORBELL,
+				      MTHCA_GET_DOORBELL_LOCK(&dev->doorbell_lock));
+
+			first_ind = srq->first_free;
+		}
 	}
 
 	if (likely(nreq)) {

drivers/infiniband/ulp/srp/ib_srp.c

@@ -340,7 +340,10 @@ static void srp_disconnect_target(struct srp_target_port *target)
 	/* XXX should send SRP_I_LOGOUT request */
 
 	init_completion(&target->done);
-	ib_send_cm_dreq(target->cm_id, NULL, 0);
+	if (ib_send_cm_dreq(target->cm_id, NULL, 0)) {
+		printk(KERN_DEBUG PFX "Sending CM DREQ failed\n");
+		return;
+	}
 	wait_for_completion(&target->done);
 }
 
@@ -351,7 +354,6 @@ static void srp_remove_work(void *target_ptr)
 	spin_lock_irq(target->scsi_host->host_lock);
 	if (target->state != SRP_TARGET_DEAD) {
 		spin_unlock_irq(target->scsi_host->host_lock);
-		scsi_host_put(target->scsi_host);
 		return;
 	}
 	target->state = SRP_TARGET_REMOVED;
@@ -365,8 +367,6 @@ static void srp_remove_work(void *target_ptr)
 	ib_destroy_cm_id(target->cm_id);
 	srp_free_target_ib(target);
 	scsi_host_put(target->scsi_host);
-	/* And another put to really free the target port... */
-	scsi_host_put(target->scsi_host);
 }
 
 static int srp_connect_target(struct srp_target_port *target)
@@ -1241,7 +1241,7 @@ static int srp_reset_device(struct scsi_cmnd *scmnd)
 	list_for_each_entry_safe(req, tmp, &target->req_queue, list)
 		if (req->scmnd->device == scmnd->device) {
 			req->scmnd->result = DID_RESET << 16;
-			scmnd->scsi_done(scmnd);
+			req->scmnd->scsi_done(req->scmnd);
 			srp_remove_req(target, req);
 		}
 

drivers/input/joystick/sidewinder.c

@@ -589,7 +589,7 @@ static int sw_connect(struct gameport *gameport, struct gameport_driver *drv)
 	struct sw *sw;
 	struct input_dev *input_dev;
 	int i, j, k, l;
-	int err;
+	int err = 0;
 	unsigned char *buf = NULL;	/* [SW_LENGTH] */
 	unsigned char *idbuf = NULL;	/* [SW_LENGTH] */
 	unsigned char m = 1;
@@ -776,7 +776,10 @@ static int sw_connect(struct gameport *gameport, struct gameport_driver *drv)
 			goto fail4;
 	}
 
-	return 0;
+ out:	kfree(buf);
+	kfree(idbuf);
+
+	return err;
 
  fail4:	input_free_device(sw->dev[i]);
  fail3:	while (--i >= 0)
@@ -784,9 +787,7 @@ static int sw_connect(struct gameport *gameport, struct gameport_driver *drv)
  fail2:	gameport_close(gameport);
  fail1:	gameport_set_drvdata(gameport, NULL);
 	kfree(sw);
-	kfree(buf);
-	kfree(idbuf);
-	return err;
+	goto out;
 }
 
 static void sw_disconnect(struct gameport *gameport)

drivers/input/keyboard/corgikbd.c

@@ -245,9 +245,9 @@ static void corgikbd_hinge_timer(unsigned long data)
 		if (hinge_count >= HINGE_STABLE_COUNT) {
 			spin_lock_irqsave(&corgikbd_data->lock, flags);
 
-			input_report_switch(corgikbd_data->input, SW_0, ((sharpsl_hinge_state & CORGI_SCP_SWA) != 0));
-			input_report_switch(corgikbd_data->input, SW_1, ((sharpsl_hinge_state & CORGI_SCP_SWB) != 0));
-			input_report_switch(corgikbd_data->input, SW_2, (READ_GPIO_BIT(CORGI_GPIO_AK_INT) != 0));
+			input_report_switch(corgikbd_data->input, SW_LID, ((sharpsl_hinge_state & CORGI_SCP_SWA) != 0));
+			input_report_switch(corgikbd_data->input, SW_TABLET_MODE, ((sharpsl_hinge_state & CORGI_SCP_SWB) != 0));
+			input_report_switch(corgikbd_data->input, SW_HEADPHONE_INSERT, (READ_GPIO_BIT(CORGI_GPIO_AK_INT) != 0));
 			input_sync(corgikbd_data->input);
 
 			spin_unlock_irqrestore(&corgikbd_data->lock, flags);
@@ -340,9 +340,9 @@ static int __init corgikbd_probe(struct platform_device *pdev)
 	for (i = 0; i < ARRAY_SIZE(corgikbd_keycode); i++)
 		set_bit(corgikbd->keycode[i], input_dev->keybit);
 	clear_bit(0, input_dev->keybit);
-	set_bit(SW_0, input_dev->swbit);
-	set_bit(SW_1, input_dev->swbit);
-	set_bit(SW_2, input_dev->swbit);
+	set_bit(SW_LID, input_dev->swbit);
+	set_bit(SW_TABLET_MODE, input_dev->swbit);
+	set_bit(SW_HEADPHONE_INSERT, input_dev->swbit);
 
 	input_register_device(corgikbd->input);
 

drivers/input/keyboard/spitzkbd.c

@@ -299,9 +299,9 @@ static void spitzkbd_hinge_timer(unsigned long data)
 	if (hinge_count >= HINGE_STABLE_COUNT) {
 		spin_lock_irqsave(&spitzkbd_data->lock, flags);
 
-		input_report_switch(spitzkbd_data->input, SW_0, ((GPLR(SPITZ_GPIO_SWA) & GPIO_bit(SPITZ_GPIO_SWA)) != 0));
-		input_report_switch(spitzkbd_data->input, SW_1, ((GPLR(SPITZ_GPIO_SWB) & GPIO_bit(SPITZ_GPIO_SWB)) != 0));
-		input_report_switch(spitzkbd_data->input, SW_2, ((GPLR(SPITZ_GPIO_AK_INT) & GPIO_bit(SPITZ_GPIO_AK_INT)) != 0));
+		input_report_switch(spitzkbd_data->input, SW_LID, ((GPLR(SPITZ_GPIO_SWA) & GPIO_bit(SPITZ_GPIO_SWA)) != 0));
+		input_report_switch(spitzkbd_data->input, SW_TABLET_MODE, ((GPLR(SPITZ_GPIO_SWB) & GPIO_bit(SPITZ_GPIO_SWB)) != 0));
+		input_report_switch(spitzkbd_data->input, SW_HEADPHONE_INSERT, ((GPLR(SPITZ_GPIO_AK_INT) & GPIO_bit(SPITZ_GPIO_AK_INT)) != 0));
 		input_sync(spitzkbd_data->input);
 
 		spin_unlock_irqrestore(&spitzkbd_data->lock, flags);
@@ -398,9 +398,9 @@ static int __init spitzkbd_probe(struct platform_device *dev)
 	for (i = 0; i < ARRAY_SIZE(spitzkbd_keycode); i++)
 		set_bit(spitzkbd->keycode[i], input_dev->keybit);
 	clear_bit(0, input_dev->keybit);
-	set_bit(SW_0, input_dev->swbit);
-	set_bit(SW_1, input_dev->swbit);
-	set_bit(SW_2, input_dev->swbit);
+	set_bit(SW_LID, input_dev->swbit);
+	set_bit(SW_TABLET_MODE, input_dev->swbit);
+	set_bit(SW_HEADPHONE_INSERT, input_dev->swbit);
 
 	input_register_device(input_dev);
 

drivers/input/misc/wistron_btns.c

@@ -318,6 +318,16 @@ static struct key_entry keymap_acer_travelmate_240[] = {
 	{ KE_END, 0 }
 };
 
+static struct key_entry keymap_aopen_1559as[] = {
+	{ KE_KEY,  0x01, KEY_HELP },
+	{ KE_KEY,  0x06, KEY_PROG3 },
+	{ KE_KEY,  0x11, KEY_PROG1 },
+	{ KE_KEY,  0x12, KEY_PROG2 },
+	{ KE_WIFI, 0x30, 0 },
+	{ KE_KEY,  0x31, KEY_MAIL },
+	{ KE_KEY,  0x36, KEY_WWW },
+};
+
 /*
  * If your machine is not here (which is currently rather likely), please send
  * a list of buttons and their key codes (reported when loading this module
@@ -369,6 +379,15 @@ static struct dmi_system_id dmi_ids[] = {
 		},
 		.driver_data = keymap_acer_travelmate_240
 	},
+        {
+		.callback = dmi_matched,
+		.ident = "AOpen 1559AS",
+		.matches = {
+			DMI_MATCH(DMI_PRODUCT_NAME, "E2U"),
+			DMI_MATCH(DMI_BOARD_NAME, "E2U"),
+		},
+		.driver_data = keymap_aopen_1559as
+	},
 	{ NULL, }
 };
 

drivers/input/mouse/alps.c

@@ -100,8 +100,8 @@ static void alps_process_packet(struct psmouse *psmouse, struct pt_regs *regs)
 	}
 
 	if (priv->i->flags & ALPS_OLDPROTO) {
-		left = packet[2] & 0x08;
-		right = packet[2] & 0x10;
+		left = packet[2] & 0x10;
+		right = packet[2] & 0x08;
 		middle = 0;
 		x = packet[1] | ((packet[0] & 0x07) << 7);
 		y = packet[4] | ((packet[3] & 0x07) << 7);

drivers/input/mouse/lifebook.c

@@ -21,12 +21,36 @@
 #include "lifebook.h"
 
 static struct dmi_system_id lifebook_dmi_table[] = {
+       {
+               .ident = "LifeBook B",
+               .matches = {
+                       DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook B Series"),
+               },
+       },
        {
                .ident = "Lifebook B",
                .matches = {
                        DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK B Series"),
                },
        },
+       {
+               .ident = "Lifebook B213x/B2150",
+               .matches = {
+                       DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook B2131/B2133/B2150"),
+               },
+       },
+       {
+               .ident = "Zephyr",
+               .matches = {
+                       DMI_MATCH(DMI_PRODUCT_NAME, "ZEPHYR"),
+               },
+       },
+       {
+               .ident = "CF-18",
+               .matches = {
+                       DMI_MATCH(DMI_PRODUCT_NAME, "CF-18"),
+               },
+       },
        {
                .ident = "Lifebook B142",
                .matches = {

drivers/input/mouse/logips2pp.c

@@ -19,6 +19,7 @@
 #define PS2PP_KIND_WHEEL	1
 #define PS2PP_KIND_MX		2
 #define PS2PP_KIND_TP3		3
+#define PS2PP_KIND_TRACKMAN	4
 
 /* Logitech mouse features */
 #define PS2PP_WHEEL		0x01
@@ -223,6 +224,7 @@ static struct ps2pp_info *get_model_info(unsigned char model)
 		{ 73,	0,			PS2PP_SIDE_BTN },
 		{ 75,	PS2PP_KIND_WHEEL,	PS2PP_WHEEL },
 		{ 76,	PS2PP_KIND_WHEEL,	PS2PP_WHEEL },
+		{ 79,	PS2PP_KIND_TRACKMAN,	PS2PP_WHEEL },		/* TrackMan with wheel */
 		{ 80,	PS2PP_KIND_WHEEL,	PS2PP_SIDE_BTN | PS2PP_WHEEL },
 		{ 81,	PS2PP_KIND_WHEEL,	PS2PP_WHEEL },
 		{ 83,	PS2PP_KIND_WHEEL,	PS2PP_WHEEL },
@@ -298,6 +300,10 @@ static void ps2pp_set_model_properties(struct psmouse *psmouse, struct ps2pp_inf
 			psmouse->name = "TouchPad 3";
 			break;
 
+		case PS2PP_KIND_TRACKMAN:
+			psmouse->name = "TrackMan";
+			break;
+
 		default:
 			/*
 			 * Set name to "Mouse" only when using PS2++,