Merge branch 'linus' into x86/urgent

Merge reason: Bring in changes that the next patch will depend on.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

Documentation/arm/OMAP/omap_pm

@@ -0,0 +1,129 @@
+
+The OMAP PM interface
+=====================
+
+This document describes the temporary OMAP PM interface.  Driver
+authors use these functions to communicate minimum latency or
+throughput constraints to the kernel power management code.
+Over time, the intention is to merge features from the OMAP PM
+interface into the Linux PM QoS code.
+
+Drivers need to express PM parameters which:
+
+- support the range of power management parameters present in the TI SRF;
+
+- separate the drivers from the underlying PM parameter
+  implementation, whether it is the TI SRF or Linux PM QoS or Linux
+  latency framework or something else;
+
+- specify PM parameters in terms of fundamental units, such as
+  latency and throughput, rather than units which are specific to OMAP
+  or to particular OMAP variants;
+
+- allow drivers which are shared with other architectures (e.g.,
+  DaVinci) to add these constraints in a way which won't affect non-OMAP
+  systems,
+
+- can be implemented immediately with minimal disruption of other
+  architectures.
+
+
+This document proposes the OMAP PM interface, including the following
+five power management functions for driver code:
+
+1. Set the maximum MPU wakeup latency:
+   (*pdata->set_max_mpu_wakeup_lat)(struct device *dev, unsigned long t)
+
+2. Set the maximum device wakeup latency:
+   (*pdata->set_max_dev_wakeup_lat)(struct device *dev, unsigned long t)
+
+3. Set the maximum system DMA transfer start latency (CORE pwrdm):
+   (*pdata->set_max_sdma_lat)(struct device *dev, long t)
+
+4. Set the minimum bus throughput needed by a device:
+   (*pdata->set_min_bus_tput)(struct device *dev, u8 agent_id, unsigned long r)
+
+5. Return the number of times the device has lost context
+   (*pdata->get_dev_context_loss_count)(struct device *dev)
+
+
+Further documentation for all OMAP PM interface functions can be
+found in arch/arm/plat-omap/include/mach/omap-pm.h.
+
+
+The OMAP PM layer is intended to be temporary
+---------------------------------------------
+
+The intention is that eventually the Linux PM QoS layer should support
+the range of power management features present in OMAP3.  As this
+happens, existing drivers using the OMAP PM interface can be modified
+to use the Linux PM QoS code; and the OMAP PM interface can disappear.
+
+
+Driver usage of the OMAP PM functions
+-------------------------------------
+
+As the 'pdata' in the above examples indicates, these functions are
+exposed to drivers through function pointers in driver .platform_data
+structures.  The function pointers are initialized by the board-*.c
+files to point to the corresponding OMAP PM functions:
+.set_max_dev_wakeup_lat will point to
+omap_pm_set_max_dev_wakeup_lat(), etc.  Other architectures which do
+not support these functions should leave these function pointers set
+to NULL.  Drivers should use the following idiom:
+
+        if (pdata->set_max_dev_wakeup_lat)
+            (*pdata->set_max_dev_wakeup_lat)(dev, t);
+
+The most common usage of these functions will probably be to specify
+the maximum time from when an interrupt occurs, to when the device
+becomes accessible.  To accomplish this, driver writers should use the
+set_max_mpu_wakeup_lat() function to to constrain the MPU wakeup
+latency, and the set_max_dev_wakeup_lat() function to constrain the
+device wakeup latency (from clk_enable() to accessibility).  For
+example,
+
+        /* Limit MPU wakeup latency */
+        if (pdata->set_max_mpu_wakeup_lat)
+            (*pdata->set_max_mpu_wakeup_lat)(dev, tc);
+
+        /* Limit device powerdomain wakeup latency */
+        if (pdata->set_max_dev_wakeup_lat)
+            (*pdata->set_max_dev_wakeup_lat)(dev, td);
+
+        /* total wakeup latency in this example: (tc + td) */
+
+The PM parameters can be overwritten by calling the function again
+with the new value.  The settings can be removed by calling the
+function with a t argument of -1 (except in the case of
+set_max_bus_tput(), which should be called with an r argument of 0).
+
+The fifth function above, omap_pm_get_dev_context_loss_count(),
+is intended as an optimization to allow drivers to determine whether the
+device has lost its internal context.  If context has been lost, the
+driver must restore its internal context before proceeding.
+
+
+Other specialized interface functions
+-------------------------------------
+
+The five functions listed above are intended to be usable by any
+device driver.  DSPBridge and CPUFreq have a few special requirements.
+DSPBridge expresses target DSP performance levels in terms of OPP IDs.
+CPUFreq expresses target MPU performance levels in terms of MPU
+frequency.  The OMAP PM interface contains functions for these
+specialized cases to convert that input information (OPPs/MPU
+frequency) into the form that the underlying power management
+implementation needs:
+
+6. (*pdata->dsp_get_opp_table)(void)
+
+7. (*pdata->dsp_set_min_opp)(u8 opp_id)
+
+8. (*pdata->dsp_get_opp)(void)
+
+9. (*pdata->cpu_get_freq_table)(void)
+
+10. (*pdata->cpu_set_freq)(unsigned long f)
+
+11. (*pdata->cpu_get_freq)(void)

Documentation/cpu-freq/user-guide.txt

@@ -176,7 +176,9 @@ scaling_governor,		and by "echoing" the name of another
 				work on some specific architectures or
 				processors.
 
-cpuinfo_cur_freq :		Current speed of the CPU, in KHz.
+cpuinfo_cur_freq :		Current frequency of the CPU as obtained from
+				the hardware, in KHz. This is the frequency
+				the CPU actually runs at.
 
 scaling_available_frequencies : List of available frequencies, in KHz.
 
@@ -196,7 +198,10 @@ related_cpus :			List of CPUs that need some sort of frequency
 
 scaling_driver :		Hardware driver for cpufreq.
 
-scaling_cur_freq :		Current frequency of the CPU, in KHz.
+scaling_cur_freq :		Current frequency of the CPU as determined by
+				the governor and cpufreq core, in KHz. This is
+				the frequency the kernel thinks the CPU runs
+				at.
 
 If you have selected the "userspace" governor which allows you to
 set the CPU operating frequency to a specific value, you can read out

Documentation/filesystems/ext4.txt

@@ -134,15 +134,9 @@ ro                   	Mount filesystem read only. Note that ext4 will
                      	mount options "ro,noload" can be used to prevent
 		     	writes to the filesystem.
 
-journal_checksum	Enable checksumming of the journal transactions.
-			This will allow the recovery code in e2fsck and the
-			kernel to detect corruption in the kernel.  It is a
-			compatible change and will be ignored by older kernels.
-
 journal_async_commit	Commit block can be written to disk without waiting
 			for descriptor blocks. If enabled older kernels cannot
-			mount the device. This will enable 'journal_checksum'
-			internally.
+			mount the device.
 
 journal=update		Update the ext4 file system's journal to the current
 			format.
@@ -263,10 +257,18 @@ resuid=n		The user ID which may use the reserved blocks.
 
 sb=n			Use alternate superblock at this location.
 
-quota
-noquota
-grpquota
-usrquota
+quota			These options are ignored by the filesystem. They
+noquota			are used only by quota tools to recognize volumes
+grpquota		where quota should be turned on. See documentation
+usrquota		in the quota-tools package for more details
+			(http://sourceforge.net/projects/linuxquota).
+
+jqfmt=<quota type>	These options tell filesystem details about quota
+usrjquota=<file>	so that quota information can be properly updated
+grpjquota=<file>	during journal replay. They replace the above
+			quota options. See documentation in the quota-tools
+			package for more details
+			(http://sourceforge.net/projects/linuxquota).
 
 bh		(*)	ext4 associates buffer heads to data pages to
 nobh			(a) cache disk block mapping information

Documentation/hwmon/wm831x

@@ -0,0 +1,37 @@
+Kernel driver wm831x-hwmon
+==========================
+
+Supported chips:
+  * Wolfson Microelectronics WM831x PMICs
+    Prefix: 'wm831x'
+    Datasheet:
+	http://www.wolfsonmicro.com/products/WM8310
+	http://www.wolfsonmicro.com/products/WM8311
+	http://www.wolfsonmicro.com/products/WM8312
+
+Authors: Mark Brown <broonie@opensource.wolfsonmicro.com>
+
+Description
+-----------
+
+The WM831x series of PMICs include an AUXADC which can be used to
+monitor a range of system operating parameters, including the voltages
+of the major supplies within the system.  Currently the driver provides
+reporting of all the input values but does not provide any alarms.
+
+Voltage Monitoring
+------------------
+
+Voltages are sampled by a 12 bit ADC.  Voltages in milivolts are 1.465
+times the ADC value.
+
+Temperature Monitoring
+----------------------
+
+Temperatures are sampled by a 12 bit ADC.  Chip and battery temperatures
+are available.  The chip temperature is calculated as:
+
+	Degrees celsius = (512.18 - data) / 1.0983
+
+while the battery temperature calculation will depend on the NTC
+thermistor component.

Documentation/hwmon/wm8350

@@ -0,0 +1,26 @@
+Kernel driver wm8350-hwmon
+==========================
+
+Supported chips:
+  * Wolfson Microelectronics WM835x PMICs
+    Prefix: 'wm8350'
+    Datasheet:
+	http://www.wolfsonmicro.com/products/WM8350
+	http://www.wolfsonmicro.com/products/WM8351
+	http://www.wolfsonmicro.com/products/WM8352
+
+Authors: Mark Brown <broonie@opensource.wolfsonmicro.com>
+
+Description
+-----------
+
+The WM835x series of PMICs include an AUXADC which can be used to
+monitor a range of system operating parameters, including the voltages
+of the major supplies within the system.  Currently the driver provides
+simple access to these major supplies.
+
+Voltage Monitoring
+------------------
+
+Voltages are sampled by a 12 bit ADC.  For the internal supplies the ADC
+is referenced to the system VRTC.

Documentation/kernel-doc-nano-HOWTO.txt

@@ -66,7 +66,9 @@ Example kernel-doc function comment:
  * The longer description can have multiple paragraphs.
  */
 
-The first line, with the short description, must be on a single line.
+The short description following the subject can span multiple lines
+and ends with an @argument description, an empty line or the end of
+the comment block.
 
 The @argument descriptions must begin on the very next line following
 this opening short function description line, with no intervening

Documentation/kernel-parameters.txt

@@ -1565,7 +1565,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			of returning the full 64-bit number.
 			The default is to return 64-bit inode numbers.
 
-	nmi_debug=	[KNL,AVR32] Specify one or more actions to take
+	nmi_debug=	[KNL,AVR32,SH] Specify one or more actions to take
 			when a NMI is triggered.
 			Format: [state][,regs][,debounce][,die]
 

Documentation/kref.txt

@@ -84,7 +84,6 @@ int my_data_handler(void)
 	task = kthread_run(more_data_handling, data, "more_data_handling");
 	if (task == ERR_PTR(-ENOMEM)) {
 		rv = -ENOMEM;
-	        kref_put(&data->refcount, data_release);
 		goto out;
 	}
 

Documentation/x86/boot.txt

@@ -599,6 +599,7 @@ Protocol:	2.07+
   0x00000000	The default x86/PC environment
   0x00000001	lguest
   0x00000002	Xen
+  0x00000003	Moorestown MID
 
 Field name:	hardware_subarch_data
 Type:		write (subarch-dependent)

MAINTAINERS

@@ -1973,7 +1973,6 @@ F:	fs/ext2/
 F:	include/linux/ext2*
 
 EXT3 FILE SYSTEM
-M:	Stephen Tweedie <sct@redhat.com>
 M:	Andrew Morton <akpm@linux-foundation.org>
 M:	Andreas Dilger <adilger@sun.com>
 L:	linux-ext4@vger.kernel.org
@@ -2901,8 +2900,8 @@ F:	fs/jffs2/
 F:	include/linux/jffs2.h
 
 JOURNALLING LAYER FOR BLOCK DEVICES (JBD)
-M:	Stephen Tweedie <sct@redhat.com>
 M:	Andrew Morton <akpm@linux-foundation.org>
+M:	Jan Kara <jack@suse.cz>
 L:	linux-ext4@vger.kernel.org
 S:	Maintained
 F:	fs/jbd*/
@@ -4455,6 +4454,14 @@ S:	Maintained
 F:	kernel/sched*
 F:	include/linux/sched.h
 
+SCORE ARCHITECTURE
+P:	Chen Liqin
+M:	liqin.chen@sunplusct.com
+P:	Lennox Wu
+M:	lennox.wu@sunplusct.com
+W:	http://www.sunplusct.com
+S:	Supported
+
 SCSI CDROM DRIVER
 M:	Jens Axboe <axboe@kernel.dk>
 L:	linux-scsi@vger.kernel.org
@@ -4654,6 +4661,12 @@ F:	arch/arm/mach-s3c2410/
 F:	drivers/*/*s3c2410*
 F:	drivers/*/*/*s3c2410*
 
+TI DAVINCI MACHINE SUPPORT
+P:	Kevin Hilman
+M:	davinci-linux-open-source@linux.davincidsp.com
+S:	Supported
+F:	arch/arm/mach-davinci
+
 SIS 190 ETHERNET DRIVER
 M:	Francois Romieu <romieu@fr.zoreil.com>
 L:	netdev@vger.kernel.org
@@ -5678,6 +5691,26 @@ S:	Supported
 F:	drivers/input/touchscreen/*wm97*
 F:	include/linux/wm97xx.h
 
+WOLFSON MICROELECTRONICS PMIC DRIVERS
+P:	Mark Brown
+M:	broonie@opensource.wolfsonmicro.com
+L:	linux-kernel@vger.kernel.org
+T:	git git://opensource.wolfsonmicro.com/linux-2.6-audioplus
+W:	http://opensource.wolfsonmicro.com/node/8
+S:	Supported
+F:	drivers/leds/leds-wm83*.c
+F:	drivers/mfd/wm8*.c
+F:	drivers/power/wm83*.c
+F:	drivers/rtc/rtc-wm83*.c
+F:	drivers/regulator/wm8*.c
+F:	drivers/video/backlight/wm83*_bl.c
+F:	drivers/watchdog/wm83*_wdt.c
+F:	include/linux/mfd/wm831x/
+F:	include/linux/mfd/wm8350/
+F:	include/linux/mfd/wm8400/
+F:	sound/soc/codecs/wm8350.c
+F:	sound/soc/codecs/wm8400.c
+
 X.25 NETWORK LAYER
 M:	Henner Eisen <eis@baty.hanse.de>
 L:	linux-x25@vger.kernel.org

arch/arm/configs/da830_omapl137_defconfig

@@ -0,0 +1,1254 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc2-davinci1
+# Wed May 13 15:33:29 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+CONFIG_ARCH_DAVINCI=y
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+CONFIG_CP_INTC=y
+
+#
+# TI DaVinci Implementations
+#
+
+#
+# DaVinci Core Type
+#
+# CONFIG_ARCH_DAVINCI_DM644x is not set
+# CONFIG_ARCH_DAVINCI_DM646x is not set
+# CONFIG_ARCH_DAVINCI_DM355 is not set
+CONFIG_ARCH_DAVINCI_DA830=y
+
+#
+# DaVinci Board Type
+#
+CONFIG_MACH_DAVINCI_DA830_EVM=y
+CONFIG_DAVINCI_MUX=y
+# CONFIG_DAVINCI_MUX_DEBUG is not set
+# CONFIG_DAVINCI_MUX_WARNINGS is not set
+CONFIG_DAVINCI_RESET_CLOCKS=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_CPU_DCACHE_WRITETHROUGH=y
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_LEDS=y
+# CONFIG_LEDS_CPU is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_NF_DEFRAG_IPV4 is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=1
+CONFIG_BLK_DEV_RAM_SIZE=32768
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+CONFIG_LXT_PHY=y
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+CONFIG_LSI_ET1011C_PHY=y
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+CONFIG_TI_DAVINCI_EMAC=y
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+CONFIG_NETCONSOLE=y
+# CONFIG_NETCONSOLE_DYNAMIC is not set
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+CONFIG_INPUT_EVBUG=m
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=m
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_XTKBD=m
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+# CONFIG_VT_CONSOLE is not set
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=3
+CONFIG_SERIAL_8250_RUNTIME_UARTS=3
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_DAVINCI=y
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+CONFIG_GPIO_PCF857X=m
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_DAVINCI_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=m
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_SOC=m
+CONFIG_SND_DAVINCI_SOC=m
+CONFIG_SND_SOC_I2C_AND_SPI=m
+# CONFIG_SND_SOC_ALL_CODECS is not set
+# CONFIG_SOUND_PRIME is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+# CONFIG_USB_MUSB_OTG is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=m
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=m
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y

arch/arm/configs/da850_omapl138_defconfig

@@ -0,0 +1,1229 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-davinci1
+# Mon Jun 29 07:54:15 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+CONFIG_ARCH_DAVINCI=y
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+CONFIG_CP_INTC=y
+
+#
+# TI DaVinci Implementations
+#
+
+#
+# DaVinci Core Type
+#
+# CONFIG_ARCH_DAVINCI_DM644x is not set
+# CONFIG_ARCH_DAVINCI_DM355 is not set
+# CONFIG_ARCH_DAVINCI_DM646x is not set
+# CONFIG_ARCH_DAVINCI_DA830 is not set
+CONFIG_ARCH_DAVINCI_DA850=y
+CONFIG_ARCH_DAVINCI_DA8XX=y
+# CONFIG_ARCH_DAVINCI_DM365 is not set
+
+#
+# DaVinci Board Type
+#
+CONFIG_MACH_DAVINCI_DA850_EVM=y
+CONFIG_DAVINCI_MUX=y
+# CONFIG_DAVINCI_MUX_DEBUG is not set
+# CONFIG_DAVINCI_MUX_WARNINGS is not set
+CONFIG_DAVINCI_RESET_CLOCKS=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_LEDS=y
+# CONFIG_LEDS_CPU is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_NF_DEFRAG_IPV4 is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=1
+CONFIG_BLK_DEV_RAM_SIZE=32768
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+CONFIG_LXT_PHY=y
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+CONFIG_LSI_ET1011C_PHY=y
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_TI_DAVINCI_EMAC is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+CONFIG_NETCONSOLE=y
+# CONFIG_NETCONSOLE_DYNAMIC is not set
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+CONFIG_INPUT_EVBUG=m
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=m
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_XTKBD=m
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+# CONFIG_VT_CONSOLE is not set
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=3
+CONFIG_SERIAL_8250_RUNTIME_UARTS=3
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_DAVINCI=y
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+CONFIG_GPIO_PCF857X=m
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_DAVINCI_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=m
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_SOC=m
+CONFIG_SND_DAVINCI_SOC=m
+CONFIG_SND_SOC_I2C_AND_SPI=m
+# CONFIG_SND_SOC_ALL_CODECS is not set
+# CONFIG_SOUND_PRIME is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=m
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=m
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y

arch/arm/configs/davinci_all_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc7
-# Tue May 26 07:24:28 2009
+# Linux kernel version: 2.6.31-rc3-davinci1
+# Fri Jul 17 08:26:52 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -9,7 +9,6 @@ CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,14 +17,13 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -62,8 +60,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -80,7 +77,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -93,8 +89,13 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -106,6 +107,11 @@ CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -118,7 +124,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -145,13 +151,14 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -160,26 +167,27 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
 # CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 CONFIG_ARCH_DAVINCI=y
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
 CONFIG_AINTC=y
+CONFIG_ARCH_DAVINCI_DMx=y
 
 #
 # TI DaVinci Implementations
@@ -191,6 +199,9 @@ CONFIG_AINTC=y
 CONFIG_ARCH_DAVINCI_DM644x=y
 CONFIG_ARCH_DAVINCI_DM355=y
 CONFIG_ARCH_DAVINCI_DM646x=y
+# CONFIG_ARCH_DAVINCI_DA830 is not set
+# CONFIG_ARCH_DAVINCI_DA850 is not set
+CONFIG_ARCH_DAVINCI_DM365=y
 
 #
 # DaVinci Board Type
@@ -200,6 +211,7 @@ CONFIG_MACH_SFFSDR=y
 CONFIG_MACH_DAVINCI_DM355_EVM=y
 CONFIG_MACH_DM355_LEOPARD=y
 CONFIG_MACH_DAVINCI_DM6467_EVM=y
+CONFIG_MACH_DAVINCI_DM365_EVM=y
 CONFIG_DAVINCI_MUX=y
 CONFIG_DAVINCI_MUX_DEBUG=y
 CONFIG_DAVINCI_MUX_WARNINGS=y
@@ -227,7 +239,6 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
 CONFIG_COMMON_CLKDEV=y
 
 #
@@ -252,7 +263,6 @@ CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_HIGHMEM is not set
@@ -268,12 +278,13 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_LEDS=y
 # CONFIG_LEDS_CPU is not set
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
@@ -415,6 +426,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -553,6 +565,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -564,6 +577,7 @@ CONFIG_MISC_DEVICES=y
 #
 CONFIG_EEPROM_AT24=y
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=m
@@ -609,10 +623,6 @@ CONFIG_BLK_DEV_SD=m
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -637,7 +647,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -684,6 +693,7 @@ CONFIG_DM9000_DEBUGLEVEL=4
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -748,18 +758,21 @@ CONFIG_INPUT_EVBUG=m
 #
 CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=m
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-CONFIG_KEYBOARD_XTKBD=m
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_XTKBD=m
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_AD7879_I2C is not set
 # CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
@@ -773,6 +786,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 # CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -832,6 +846,7 @@ CONFIG_I2C_HELPER_AUTO=y
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
 CONFIG_I2C_DAVINCI=y
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
@@ -854,7 +869,6 @@ CONFIG_I2C_DAVINCI=y
 #
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -935,6 +949,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
@@ -986,52 +1001,8 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=y
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=y
-CONFIG_MEDIA_TUNER_TDA8290=y
-CONFIG_MEDIA_TUNER_TDA9887=y
-CONFIG_MEDIA_TUNER_TEA5761=y
-CONFIG_MEDIA_TUNER_TEA5767=y
-CONFIG_MEDIA_TUNER_MT20XX=y
-CONFIG_MEDIA_TUNER_XC2028=y
-CONFIG_MEDIA_TUNER_XC5000=y
-CONFIG_MEDIA_TUNER_MC44S803=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_SOC_CAMERA is not set
-# CONFIG_V4L_USB_DRIVERS is not set
-# CONFIG_RADIO_ADAPTERS is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1102,6 +1073,11 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
@@ -1112,9 +1088,16 @@ CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_CAIAQ is not set
 CONFIG_SND_SOC=m
-# CONFIG_SND_DAVINCI_SOC is not set
+CONFIG_SND_DAVINCI_SOC=m
+CONFIG_SND_DAVINCI_SOC_I2S=m
+CONFIG_SND_DAVINCI_SOC_MCASP=m
+CONFIG_SND_DAVINCI_SOC_EVM=m
+CONFIG_SND_DM6467_SOC_EVM=m
+# CONFIG_SND_DAVINCI_SOC_SFFSDR is not set
 CONFIG_SND_SOC_I2C_AND_SPI=m
 # CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_SPDIF=m
+CONFIG_SND_SOC_TLV320AIC3X=m
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
@@ -1143,7 +1126,7 @@ CONFIG_HID_BELKIN=m
 CONFIG_HID_CHERRY=m
 CONFIG_HID_CHICONY=m
 CONFIG_HID_CYPRESS=m
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=m
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=m
@@ -1160,10 +1143,11 @@ CONFIG_HID_PETALYNX=m
 CONFIG_HID_SAMSUNG=m
 CONFIG_HID_SONY=m
 CONFIG_HID_SUNPLUS=m
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
@@ -1266,6 +1250,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
@@ -1285,17 +1270,20 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_OMAP is not set
 # CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
 # CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
 # CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_AMD5536UDC is not set
 # CONFIG_USB_GADGET_FSL_QE is not set
 # CONFIG_USB_GADGET_CI13XXX is not set
 # CONFIG_USB_GADGET_NET2280 is not set
 # CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
 CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
+# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=m
 CONFIG_USB_ETH_RNDIS=y
 CONFIG_USB_GADGETFS=m
@@ -1311,7 +1299,7 @@ CONFIG_USB_CDC_COMPOSITE=m
 #
 CONFIG_USB_OTG_UTILS=y
 # CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_NOP_USB_XCEIV=m
 CONFIG_MMC=m
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
@@ -1328,7 +1316,6 @@ CONFIG_MMC_BLOCK=m
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_DAVINCI is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
@@ -1340,7 +1327,7 @@ CONFIG_LEDS_CLASS=m
 # CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=m
 CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP3944 is not set
 # CONFIG_LEDS_PCA955X is not set
 # CONFIG_LEDS_BD2802 is not set
 
@@ -1386,6 +1373,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1433,14 +1421,16 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
 # CONFIG_XFS_DEBUG is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1623,6 +1613,7 @@ CONFIG_TIMER_STATS=y
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 CONFIG_DEBUG_PREEMPT=y
 CONFIG_DEBUG_RT_MUTEXES=y
 CONFIG_DEBUG_PI_LIST=y
@@ -1654,18 +1645,16 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set

arch/arm/configs/n8x0_defconfig

@@ -0,0 +1,1104 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc5
+# Thu Aug  6 22:17:23 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+# CONFIG_CLASSIC_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+CONFIG_ARCH_OMAP2=y
+# CONFIG_ARCH_OMAP3 is not set
+# CONFIG_ARCH_OMAP4 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+CONFIG_OMAP_RESET_CLOCKS=y
+# CONFIG_OMAP_MUX is not set
+# CONFIG_OMAP_MCBSP is not set
+CONFIG_OMAP_MBOX_FWK=y
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP Core Type
+#
+CONFIG_ARCH_OMAP24XX=y
+CONFIG_ARCH_OMAP2420=y
+# CONFIG_ARCH_OMAP2430 is not set
+
+#
+# OMAP Board Type
+#
+CONFIG_MACH_OMAP2_TUSB6010=y
+# CONFIG_MACH_OMAP_H4 is not set
+# CONFIG_MACH_OMAP_APOLLON is not set
+# CONFIG_MACH_OMAP_2430SDP is not set
+CONFIG_MACH_NOKIA_N8X0=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+# CONFIG_CPU_32v6K is not set
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_ARM_ERRATA_411920 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_LEDS=y
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x10C08000
+CONFIG_ZBOOT_ROM_BSS=0x10200000
+# CONFIG_ZBOOT_ROM is not set
+CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 console=ttyS0,115200n8"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+# CONFIG_MTD_CHAR is not set
+CONFIG_HAVE_MTD_OTP=y
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+CONFIG_MTD_ONENAND=y
+# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
+# CONFIG_MTD_ONENAND_GENERIC is not set
+CONFIG_MTD_ONENAND_OMAP2=y
+CONFIG_MTD_ONENAND_OTP=y
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_TUSB6010=y
+# CONFIG_USB_MUSB_HOST is not set
+CONFIG_USB_MUSB_PERIPHERAL=y
+# CONFIG_USB_MUSB_OTG is not set
+CONFIG_USB_GADGET_MUSB_HDRC=y
+# CONFIG_MUSB_PIO_ONLY is not set
+# CONFIG_USB_INVENTRA_DMA is not set
+# CONFIG_USB_TI_CPPI_DMA is not set
+CONFIG_USB_TUSB_OMAP_DMA=y
+CONFIG_USB_MUSB_DEBUG=y
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DEBUG=y
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=y
+# CONFIG_USB_ETH_RNDIS is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+CONFIG_NOP_USB_XCEIV=y
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y

arch/arm/configs/omap3_beagle_defconfig

@@ -128,6 +128,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
 
 #
 # System Type
@@ -236,6 +237,7 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_BPREDICT_DISABLE is not set
 CONFIG_HAS_TLS_REG=y
 # CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
 
 #
 # Bus support
@@ -317,7 +319,12 @@ CONFIG_BINFMT_MISC=y
 #
 # Power management options
 #
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
@@ -713,6 +720,7 @@ CONFIG_GPIOLIB=y
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
 
 #
 # PCI GPIO expanders:
@@ -741,6 +749,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+CONFIG_TWL4030_CORE=y
 # CONFIG_UCB1400_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_T7L66XB is not set
@@ -787,7 +796,7 @@ CONFIG_DUMMY_CONSOLE=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
 # CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
@@ -798,7 +807,8 @@ CONFIG_USB=y
 CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
@@ -806,6 +816,8 @@ CONFIG_USB_MON=y
 #
 # USB Host Controller Drivers
 #
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
@@ -818,10 +830,10 @@ CONFIG_USB_MUSB_SOC=y
 #
 # OMAP 343x high speed USB support
 #
-CONFIG_USB_MUSB_HOST=y
+# CONFIG_USB_MUSB_HOST is not set
 # CONFIG_USB_MUSB_PERIPHERAL is not set
-# CONFIG_USB_MUSB_OTG is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
 CONFIG_USB_MUSB_HDRC_HCD=y
 # CONFIG_MUSB_PIO_ONLY is not set
 CONFIG_USB_INVENTRA_DMA=y
@@ -887,8 +899,8 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_FSL_USB2 is not set
 # CONFIG_USB_GADGET_NET2280 is not set
 # CONFIG_USB_GADGET_PXA25X is not set
-CONFIG_USB_GADGET_M66592=y
-CONFIG_USB_M66592=y
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_M66592 is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
@@ -906,6 +918,15 @@ CONFIG_USB_ETH_RNDIS=y
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
 # CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+CONFIG_TWL4030_USB=y
+# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
@@ -923,6 +944,7 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 #
 # CONFIG_MMC_SDHCI is not set
 # CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_NEW_LEDS is not set
@@ -981,10 +1003,11 @@ CONFIG_RTC_INTF_DEV=y
 #
 # Voltage and Current regulators
 #
-# CONFIG_REGULATOR is not set
+CONFIG_REGULATOR=y
 # CONFIG_REGULATOR_FIXED_VOLTAGE is not set
 # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
 # CONFIG_REGULATOR_BQ24022 is not set
+CONFIG_REGULATOR_TWL4030=y
 # CONFIG_UIO is not set
 
 #

arch/arm/configs/omap_3430sdp_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc8
-# Fri Mar 13 14:17:01 2009
+# Linux kernel version: 2.6.30-omap1
+# Tue Jun 23 10:36:45 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -197,9 +197,9 @@ CONFIG_OMAP_MCBSP=y
 CONFIG_OMAP_32K_TIMER=y
 CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+CONFIG_OMAP_LL_DEBUG_UART1=y
 # CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
 CONFIG_OMAP_SERIAL_WAKE=y
 CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
@@ -207,10 +207,10 @@ CONFIG_ARCH_OMAP3430=y
 #
 # OMAP Board Type
 #
-CONFIG_MACH_OMAP3_BEAGLE=y
-CONFIG_MACH_OMAP_LDP=y
-CONFIG_MACH_OVERO=y
-CONFIG_MACH_OMAP3_PANDORA=y
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
 CONFIG_MACH_OMAP_3430SDP=y
 
 #
@@ -950,7 +950,7 @@ CONFIG_SPI_OMAP24XX=y
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
-CONFIG_DEBUG_GPIO=y
+# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
 
 #
@@ -1370,7 +1370,7 @@ CONFIG_SND_OMAP_SOC=y
 CONFIG_SND_OMAP_SOC_MCBSP=y
 # CONFIG_SND_OMAP_SOC_OVERO is not set
 CONFIG_SND_OMAP_SOC_SDP3430=y
-CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=y
+# CONFIG_SND_OMAP_SOC_OMAP3_PANDORA is not set
 CONFIG_SND_SOC_I2C_AND_SPI=y
 # CONFIG_SND_SOC_ALL_CODECS is not set
 CONFIG_SND_SOC_TWL4030=y

arch/arm/configs/rx51_defconfig

@@ -1006,6 +1006,7 @@ CONFIG_WATCHDOG=y
 #
 # CONFIG_SOFT_WATCHDOG is not set
 CONFIG_OMAP_WATCHDOG=m
+CONFIG_TWL4030_WATCHDOG=m
 
 #
 # USB-based Watchdog Cards

arch/arm/mach-davinci/Kconfig

@@ -6,6 +6,9 @@ config AINTC
 config CP_INTC
 	bool
 
+config ARCH_DAVINCI_DMx
+	bool
+
 menu "TI DaVinci Implementations"
 
 comment "DaVinci Core Type"
@@ -13,20 +16,41 @@ comment "DaVinci Core Type"
 config ARCH_DAVINCI_DM644x
 	bool "DaVinci 644x based system"
 	select AINTC
+	select ARCH_DAVINCI_DMx
 
 config ARCH_DAVINCI_DM355
         bool "DaVinci 355 based system"
 	select AINTC
+	select ARCH_DAVINCI_DMx
 
 config ARCH_DAVINCI_DM646x
         bool "DaVinci 646x based system"
 	select AINTC
+	select ARCH_DAVINCI_DMx
+
+config ARCH_DAVINCI_DA830
+        bool "DA830/OMAP-L137 based system"
+	select CP_INTC
+	select ARCH_DAVINCI_DA8XX
+
+config ARCH_DAVINCI_DA850
+	bool "DA850/OMAP-L138 based system"
+	select CP_INTC
+	select ARCH_DAVINCI_DA8XX
+
+config ARCH_DAVINCI_DA8XX
+	bool
+
+config ARCH_DAVINCI_DM365
+	bool "DaVinci 365 based system"
+	select AINTC
+	select ARCH_DAVINCI_DMx
 
 comment "DaVinci Board Type"
 
 config MACH_DAVINCI_EVM
 	bool "TI DM644x EVM"
-	default y
+	default ARCH_DAVINCI_DM644x
 	depends on ARCH_DAVINCI_DM644x
 	help
 	  Configure this option to specify the whether the board used
@@ -41,6 +65,7 @@ config MACH_SFFSDR
 
 config MACH_DAVINCI_DM355_EVM
 	bool "TI DM355 EVM"
+	default ARCH_DAVINCI_DM355
 	depends on ARCH_DAVINCI_DM355
 	help
 	  Configure this option to specify the whether the board used
@@ -55,11 +80,33 @@ config MACH_DM355_LEOPARD
 
 config MACH_DAVINCI_DM6467_EVM
 	bool "TI DM6467 EVM"
+	default ARCH_DAVINCI_DM646x
 	depends on ARCH_DAVINCI_DM646x
 	help
 	  Configure this option to specify the whether the board used
 	  for development is a DM6467 EVM
 
+config MACH_DAVINCI_DM365_EVM
+	bool "TI DM365 EVM"
+	default ARCH_DAVINCI_DM365
+	depends on ARCH_DAVINCI_DM365
+	help
+	  Configure this option to specify whether the board used
+	  for development is a DM365 EVM
+
+config MACH_DAVINCI_DA830_EVM
+	bool "TI DA830/OMAP-L137 Reference Platform"
+	default ARCH_DAVINCI_DA830
+	depends on ARCH_DAVINCI_DA830
+	help
+	  Say Y here to select the TI DA830/OMAP-L137 Evaluation Module.
+
+config MACH_DAVINCI_DA850_EVM
+	bool "TI DA850/OMAP-L138 Reference Platform"
+	default ARCH_DAVINCI_DA850
+	depends on ARCH_DAVINCI_DA850
+	help
+	  Say Y here to select the TI DA850/OMAP-L138 Evaluation Module.
 
 config DAVINCI_MUX
 	bool "DAVINCI multiplexing support"

arch/arm/mach-davinci/Makefile

@@ -5,14 +5,17 @@
 
 # Common objects
 obj-y 			:= time.o clock.o serial.o io.o psc.o \
-			   gpio.o devices.o dma.o usb.o common.o sram.o
+			   gpio.o dma.o usb.o common.o sram.o
 
 obj-$(CONFIG_DAVINCI_MUX)		+= mux.o
 
 # Chip specific
-obj-$(CONFIG_ARCH_DAVINCI_DM644x)       += dm644x.o
-obj-$(CONFIG_ARCH_DAVINCI_DM355)        += dm355.o
-obj-$(CONFIG_ARCH_DAVINCI_DM646x)       += dm646x.o
+obj-$(CONFIG_ARCH_DAVINCI_DM644x)       += dm644x.o devices.o
+obj-$(CONFIG_ARCH_DAVINCI_DM355)        += dm355.o devices.o
+obj-$(CONFIG_ARCH_DAVINCI_DM646x)       += dm646x.o devices.o
+obj-$(CONFIG_ARCH_DAVINCI_DM365)	+= dm365.o devices.o
+obj-$(CONFIG_ARCH_DAVINCI_DA830)        += da830.o devices-da8xx.o
+obj-$(CONFIG_ARCH_DAVINCI_DA850)        += da850.o devices-da8xx.o
 
 obj-$(CONFIG_AINTC)			+= irq.o
 obj-$(CONFIG_CP_INTC)			+= cp_intc.o
@@ -23,3 +26,6 @@ obj-$(CONFIG_MACH_SFFSDR)		+= board-sffsdr.o
 obj-$(CONFIG_MACH_DAVINCI_DM355_EVM)	+= board-dm355-evm.o
 obj-$(CONFIG_MACH_DM355_LEOPARD)	+= board-dm355-leopard.o
 obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM)	+= board-dm646x-evm.o
+obj-$(CONFIG_MACH_DAVINCI_DM365_EVM)	+= board-dm365-evm.o
+obj-$(CONFIG_MACH_DAVINCI_DA830_EVM)	+= board-da830-evm.o
+obj-$(CONFIG_MACH_DAVINCI_DA850_EVM)	+= board-da850-evm.o

arch/arm/mach-davinci/Makefile.boot

@@ -1,3 +1,13 @@
+ifeq ($(CONFIG_ARCH_DAVINCI_DA8XX),y)
+ifeq ($(CONFIG_ARCH_DAVINCI_DMx),y)
+$(error Cannot enable DaVinci and DA8XX platforms concurrently)
+else
+   zreladdr-y	:= 0xc0008000
+params_phys-y	:= 0xc0000100
+initrd_phys-y	:= 0xc0800000
+endif
+else
    zreladdr-y	:= 0x80008000
 params_phys-y	:= 0x80000100
 initrd_phys-y	:= 0x80800000
+endif

arch/arm/mach-davinci/board-da830-evm.c

@@ -0,0 +1,157 @@
+/*
+ * TI DA830/OMAP L137 EVM board
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ * Derived from: arch/arm/mach-davinci/board-dm644x-evm.c
+ *
+ * 2007, 2009 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/common.h>
+#include <mach/irqs.h>
+#include <mach/cp_intc.h>
+#include <mach/da8xx.h>
+#include <mach/asp.h>
+
+#define DA830_EVM_PHY_MASK		0x0
+#define DA830_EVM_MDIO_FREQUENCY	2200000	/* PHY bus frequency */
+
+static struct at24_platform_data da830_evm_i2c_eeprom_info = {
+	.byte_len	= SZ_256K / 8,
+	.page_size	= 64,
+	.flags		= AT24_FLAG_ADDR16,
+	.setup		= davinci_get_mac_addr,
+	.context	= (void *)0x7f00,
+};
+
+static struct i2c_board_info __initdata da830_evm_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("24c256", 0x50),
+		.platform_data	= &da830_evm_i2c_eeprom_info,
+	},
+	{
+		I2C_BOARD_INFO("tlv320aic3x", 0x18),
+	}
+};
+
+static struct davinci_i2c_platform_data da830_evm_i2c_0_pdata = {
+	.bus_freq	= 100,	/* kHz */
+	.bus_delay	= 0,	/* usec */
+};
+
+static struct davinci_uart_config da830_evm_uart_config __initdata = {
+	.enabled_uarts = 0x7,
+};
+
+static u8 da830_iis_serializer_direction[] = {
+	RX_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
+	INACTIVE_MODE,	TX_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
+	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
+};
+
+static struct snd_platform_data da830_evm_snd_data = {
+	.tx_dma_offset  = 0x2000,
+	.rx_dma_offset  = 0x2000,
+	.op_mode        = DAVINCI_MCASP_IIS_MODE,
+	.num_serializer = ARRAY_SIZE(da830_iis_serializer_direction),
+	.tdm_slots      = 2,
+	.serial_dir     = da830_iis_serializer_direction,
+	.eventq_no      = EVENTQ_0,
+	.version	= MCASP_VERSION_2,
+	.txnumevt	= 1,
+	.rxnumevt	= 1,
+};
+
+static __init void da830_evm_init(void)
+{
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	int ret;
+
+	ret = da8xx_register_edma();
+	if (ret)
+		pr_warning("da830_evm_init: edma registration failed: %d\n",
+				ret);
+
+	ret = da8xx_pinmux_setup(da830_i2c0_pins);
+	if (ret)
+		pr_warning("da830_evm_init: i2c0 mux setup failed: %d\n",
+				ret);
+
+	ret = da8xx_register_i2c(0, &da830_evm_i2c_0_pdata);
+	if (ret)
+		pr_warning("da830_evm_init: i2c0 registration failed: %d\n",
+				ret);
+
+	soc_info->emac_pdata->phy_mask = DA830_EVM_PHY_MASK;
+	soc_info->emac_pdata->mdio_max_freq = DA830_EVM_MDIO_FREQUENCY;
+	soc_info->emac_pdata->rmii_en = 1;
+
+	ret = da8xx_pinmux_setup(da830_cpgmac_pins);
+	if (ret)
+		pr_warning("da830_evm_init: cpgmac mux setup failed: %d\n",
+				ret);
+
+	ret = da8xx_register_emac();
+	if (ret)
+		pr_warning("da830_evm_init: emac registration failed: %d\n",
+				ret);
+
+	ret = da8xx_register_watchdog();
+	if (ret)
+		pr_warning("da830_evm_init: watchdog registration failed: %d\n",
+				ret);
+
+	davinci_serial_init(&da830_evm_uart_config);
+	i2c_register_board_info(1, da830_evm_i2c_devices,
+			ARRAY_SIZE(da830_evm_i2c_devices));
+
+	ret = da8xx_pinmux_setup(da830_mcasp1_pins);
+	if (ret)
+		pr_warning("da830_evm_init: mcasp1 mux setup failed: %d\n",
+				ret);
+
+	da8xx_init_mcasp(1, &da830_evm_snd_data);
+}
+
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+static int __init da830_evm_console_init(void)
+{
+	return add_preferred_console("ttyS", 2, "115200");
+}
+console_initcall(da830_evm_console_init);
+#endif
+
+static __init void da830_evm_irq_init(void)
+{
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+	cp_intc_init((void __iomem *)DA8XX_CP_INTC_VIRT, DA830_N_CP_INTC_IRQ,
+			soc_info->intc_irq_prios);
+}
+
+static void __init da830_evm_map_io(void)
+{
+	da830_init();
+}
+
+MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP L137 EVM")
+	.phys_io	= IO_PHYS,
+	.io_pg_offst	= (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+	.boot_params	= (DA8XX_DDR_BASE + 0x100),
+	.map_io		= da830_evm_map_io,
+	.init_irq	= da830_evm_irq_init,
+	.timer		= &davinci_timer,
+	.init_machine	= da830_evm_init,
+MACHINE_END

arch/arm/mach-davinci/board-da850-evm.c

@@ -0,0 +1,415 @@
+/*
+ * TI DA850/OMAP-L138 EVM board
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Derived from: arch/arm/mach-davinci/board-da830-evm.c
+ * Original Copyrights follow:
+ *
+ * 2007, 2009 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/common.h>
+#include <mach/irqs.h>
+#include <mach/cp_intc.h>
+#include <mach/da8xx.h>
+#include <mach/nand.h>
+
+#define DA850_EVM_PHY_MASK		0x1
+#define DA850_EVM_MDIO_FREQUENCY	2200000 /* PHY bus frequency */
+
+#define DA850_LCD_BL_PIN		GPIO_TO_PIN(2, 15)
+#define DA850_LCD_PWR_PIN		GPIO_TO_PIN(8, 10)
+
+#define DA850_MMCSD_CD_PIN		GPIO_TO_PIN(4, 0)
+#define DA850_MMCSD_WP_PIN		GPIO_TO_PIN(4, 1)
+
+static struct mtd_partition da850_evm_norflash_partition[] = {
+	{
+		.name           = "NOR filesystem",
+		.offset         = 0,
+		.size           = MTDPART_SIZ_FULL,
+		.mask_flags     = 0,
+	},
+};
+
+static struct physmap_flash_data da850_evm_norflash_data = {
+	.width		= 2,
+	.parts		= da850_evm_norflash_partition,
+	.nr_parts	= ARRAY_SIZE(da850_evm_norflash_partition),
+};
+
+static struct resource da850_evm_norflash_resource[] = {
+	{
+		.start	= DA8XX_AEMIF_CS2_BASE,
+		.end	= DA8XX_AEMIF_CS2_BASE + SZ_32M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device da850_evm_norflash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data  = &da850_evm_norflash_data,
+	},
+	.num_resources	= 1,
+	.resource	= da850_evm_norflash_resource,
+};
+
+/* DA850/OMAP-L138 EVM includes a 512 MByte large-page NAND flash
+ * (128K blocks). It may be used instead of the (default) SPI flash
+ * to boot, using TI's tools to install the secondary boot loader
+ * (UBL) and U-Boot.
+ */
+struct mtd_partition da850_evm_nandflash_partition[] = {
+	{
+		.name		= "u-boot env",
+		.offset		= 0,
+		.size		= SZ_128K,
+		.mask_flags	= MTD_WRITEABLE,
+	 },
+	{
+		.name		= "UBL",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_128K,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "u-boot",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 4 * SZ_128K,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "kernel",
+		.offset		= 0x200000,
+		.size		= SZ_2M,
+		.mask_flags	= 0,
+	},
+	{
+		.name		= "filesystem",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0,
+	},
+};
+
+static struct davinci_nand_pdata da850_evm_nandflash_data = {
+	.parts		= da850_evm_nandflash_partition,
+	.nr_parts	= ARRAY_SIZE(da850_evm_nandflash_partition),
+	.ecc_mode	= NAND_ECC_HW,
+	.options	= NAND_USE_FLASH_BBT,
+};
+
+static struct resource da850_evm_nandflash_resource[] = {
+	{
+		.start	= DA8XX_AEMIF_CS3_BASE,
+		.end	= DA8XX_AEMIF_CS3_BASE + SZ_512K + 2 * SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= DA8XX_AEMIF_CTL_BASE,
+		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device da850_evm_nandflash_device = {
+	.name		= "davinci_nand",
+	.id		= 1,
+	.dev		= {
+		.platform_data	= &da850_evm_nandflash_data,
+	},
+	.num_resources	= ARRAY_SIZE(da850_evm_nandflash_resource),
+	.resource	= da850_evm_nandflash_resource,
+};
+
+static struct i2c_board_info __initdata da850_evm_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("tlv320aic3x", 0x18),
+	}
+};
+
+static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = {
+	.bus_freq	= 100,	/* kHz */
+	.bus_delay	= 0,	/* usec */
+};
+
+static struct davinci_uart_config da850_evm_uart_config __initdata = {
+	.enabled_uarts = 0x7,
+};
+
+static struct platform_device *da850_evm_devices[] __initdata = {
+	&da850_evm_nandflash_device,
+	&da850_evm_norflash_device,
+};
+
+/* davinci da850 evm audio machine driver */
+static u8 da850_iis_serializer_direction[] = {
+	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
+	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
+	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	TX_MODE,
+	RX_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
+};
+
+static struct snd_platform_data da850_evm_snd_data = {
+	.tx_dma_offset	= 0x2000,
+	.rx_dma_offset	= 0x2000,
+	.op_mode	= DAVINCI_MCASP_IIS_MODE,
+	.num_serializer	= ARRAY_SIZE(da850_iis_serializer_direction),
+	.tdm_slots	= 2,
+	.serial_dir	= da850_iis_serializer_direction,
+	.eventq_no	= EVENTQ_1,
+	.version	= MCASP_VERSION_2,
+	.txnumevt	= 1,
+	.rxnumevt	= 1,
+};
+
+static int da850_evm_mmc_get_ro(int index)
+{
+	return gpio_get_value(DA850_MMCSD_WP_PIN);
+}
+
+static int da850_evm_mmc_get_cd(int index)
+{
+	return !gpio_get_value(DA850_MMCSD_CD_PIN);
+}
+
+static struct davinci_mmc_config da850_mmc_config = {
+	.get_ro		= da850_evm_mmc_get_ro,
+	.get_cd		= da850_evm_mmc_get_cd,
+	.wires		= 4,
+	.version	= MMC_CTLR_VERSION_2,
+};
+
+static int da850_lcd_hw_init(void)
+{
+	int status;
+
+	status = gpio_request(DA850_LCD_BL_PIN, "lcd bl\n");
+	if (status < 0)
+		return status;
+
+	status = gpio_request(DA850_LCD_PWR_PIN, "lcd pwr\n");
+	if (status < 0) {
+		gpio_free(DA850_LCD_BL_PIN);
+		return status;
+	}
+
+	gpio_direction_output(DA850_LCD_BL_PIN, 0);
+	gpio_direction_output(DA850_LCD_PWR_PIN, 0);
+
+	/* disable lcd backlight */
+	gpio_set_value(DA850_LCD_BL_PIN, 0);
+
+	/* disable lcd power */
+	gpio_set_value(DA850_LCD_PWR_PIN, 0);
+
+	/* enable lcd power */
+	gpio_set_value(DA850_LCD_PWR_PIN, 1);
+
+	/* enable lcd backlight */
+	gpio_set_value(DA850_LCD_BL_PIN, 1);
+
+	return 0;
+}
+
+#define DA8XX_AEMIF_CE2CFG_OFFSET	0x10
+#define DA8XX_AEMIF_ASIZE_16BIT		0x1
+
+static void __init da850_evm_init_nor(void)
+{
+	void __iomem *aemif_addr;
+
+	aemif_addr = ioremap(DA8XX_AEMIF_CTL_BASE, SZ_32K);
+
+	/* Configure data bus width of CS2 to 16 bit */
+	writel(readl(aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET) |
+		DA8XX_AEMIF_ASIZE_16BIT,
+		aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET);
+
+	iounmap(aemif_addr);
+}
+
+#if defined(CONFIG_MTD_PHYSMAP) || \
+    defined(CONFIG_MTD_PHYSMAP_MODULE)
+#define HAS_NOR 1
+#else
+#define HAS_NOR 0
+#endif
+
+#if defined(CONFIG_MMC_DAVINCI) || \
+    defined(CONFIG_MMC_DAVINCI_MODULE)
+#define HAS_MMC 1
+#else
+#define HAS_MMC 0
+#endif
+
+static __init void da850_evm_init(void)
+{
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	int ret;
+
+	ret = da8xx_pinmux_setup(da850_nand_pins);
+	if (ret)
+		pr_warning("da850_evm_init: nand mux setup failed: %d\n",
+				ret);
+
+	ret = da8xx_pinmux_setup(da850_nor_pins);
+	if (ret)
+		pr_warning("da850_evm_init: nor mux setup failed: %d\n",
+				ret);
+
+	da850_evm_init_nor();
+
+	platform_add_devices(da850_evm_devices,
+				ARRAY_SIZE(da850_evm_devices));
+
+	ret = da8xx_register_edma();
+	if (ret)
+		pr_warning("da850_evm_init: edma registration failed: %d\n",
+				ret);
+
+	ret = da8xx_pinmux_setup(da850_i2c0_pins);
+	if (ret)
+		pr_warning("da850_evm_init: i2c0 mux setup failed: %d\n",
+				ret);
+
+	ret = da8xx_register_i2c(0, &da850_evm_i2c_0_pdata);
+	if (ret)
+		pr_warning("da850_evm_init: i2c0 registration failed: %d\n",
+				ret);
+
+	soc_info->emac_pdata->phy_mask = DA850_EVM_PHY_MASK;
+	soc_info->emac_pdata->mdio_max_freq = DA850_EVM_MDIO_FREQUENCY;
+	soc_info->emac_pdata->rmii_en = 0;
+
+	ret = da8xx_pinmux_setup(da850_cpgmac_pins);
+	if (ret)
+		pr_warning("da850_evm_init: cpgmac mux setup failed: %d\n",
+				ret);
+
+	ret = da8xx_register_emac();
+	if (ret)
+		pr_warning("da850_evm_init: emac registration failed: %d\n",
+				ret);
+
+	ret = da8xx_register_watchdog();
+	if (ret)
+		pr_warning("da830_evm_init: watchdog registration failed: %d\n",
+				ret);
+
+	if (HAS_MMC) {
+		if (HAS_NOR)
+			pr_warning("WARNING: both NOR Flash and MMC/SD are "
+				"enabled, but they share AEMIF pins.\n"
+				"\tDisable one of them.\n");
+
+		ret = da8xx_pinmux_setup(da850_mmcsd0_pins);
+		if (ret)
+			pr_warning("da850_evm_init: mmcsd0 mux setup failed:"
+					" %d\n", ret);
+
+		ret = gpio_request(DA850_MMCSD_CD_PIN, "MMC CD\n");
+		if (ret)
+			pr_warning("da850_evm_init: can not open GPIO %d\n",
+					DA850_MMCSD_CD_PIN);
+		gpio_direction_input(DA850_MMCSD_CD_PIN);
+
+		ret = gpio_request(DA850_MMCSD_WP_PIN, "MMC WP\n");
+		if (ret)
+			pr_warning("da850_evm_init: can not open GPIO %d\n",
+					DA850_MMCSD_WP_PIN);
+		gpio_direction_input(DA850_MMCSD_WP_PIN);
+
+		ret = da8xx_register_mmcsd0(&da850_mmc_config);
+		if (ret)
+			pr_warning("da850_evm_init: mmcsd0 registration failed:"
+					" %d\n", ret);
+	}
+
+	davinci_serial_init(&da850_evm_uart_config);
+
+	i2c_register_board_info(1, da850_evm_i2c_devices,
+			ARRAY_SIZE(da850_evm_i2c_devices));
+
+	/*
+	 * shut down uart 0 and 1; they are not used on the board and
+	 * accessing them causes endless "too much work in irq53" messages
+	 * with arago fs
+	 */
+	__raw_writel(0, IO_ADDRESS(DA8XX_UART1_BASE) + 0x30);
+	__raw_writel(0, IO_ADDRESS(DA8XX_UART0_BASE) + 0x30);
+
+	ret = da8xx_pinmux_setup(da850_mcasp_pins);
+	if (ret)
+		pr_warning("da850_evm_init: mcasp mux setup failed: %d\n",
+				ret);
+
+	da8xx_init_mcasp(0, &da850_evm_snd_data);
+
+	ret = da8xx_pinmux_setup(da850_lcdcntl_pins);
+	if (ret)
+		pr_warning("da850_evm_init: lcdcntl mux setup failed: %d\n",
+				ret);
+
+	ret = da850_lcd_hw_init();
+	if (ret)
+		pr_warning("da850_evm_init: lcd initialization failed: %d\n",
+				ret);
+
+	ret = da8xx_register_lcdc();
+	if (ret)
+		pr_warning("da850_evm_init: lcdc registration failed: %d\n",
+				ret);
+}
+
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+static int __init da850_evm_console_init(void)
+{
+	return add_preferred_console("ttyS", 2, "115200");
+}
+console_initcall(da850_evm_console_init);
+#endif
+
+static __init void da850_evm_irq_init(void)
+{
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+	cp_intc_init((void __iomem *)DA8XX_CP_INTC_VIRT, DA850_N_CP_INTC_IRQ,
+			soc_info->intc_irq_prios);
+}
+
+static void __init da850_evm_map_io(void)
+{
+	da850_init();
+}
+
+MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138 EVM")
+	.phys_io	= IO_PHYS,
+	.io_pg_offst	= (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+	.boot_params	= (DA8XX_DDR_BASE + 0x100),
+	.map_io		= da850_evm_map_io,
+	.init_irq	= da850_evm_irq_init,
+	.timer		= &davinci_timer,
+	.init_machine	= da850_evm_init,
+MACHINE_END

arch/arm/mach-davinci/board-dm355-evm.c

@@ -20,6 +20,8 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/clk.h>
+#include <linux/videodev2.h>
+#include <media/tvp514x.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/eeprom.h>
 
@@ -117,6 +119,8 @@ static struct davinci_i2c_platform_data i2c_pdata = {
 	.bus_delay	= 0	/* usec */,
 };
 
+static struct snd_platform_data dm355_evm_snd_data;
+
 static int dm355evm_mmc_gpios = -EINVAL;
 
 static void dm355evm_mmcsd_gpios(unsigned gpio)
@@ -134,11 +138,11 @@ static void dm355evm_mmcsd_gpios(unsigned gpio)
 }
 
 static struct i2c_board_info dm355evm_i2c_info[] = {
-	{ I2C_BOARD_INFO("dm355evm_msp", 0x25),
+	{	I2C_BOARD_INFO("dm355evm_msp", 0x25),
 		.platform_data = dm355evm_mmcsd_gpios,
-		/* plus irq */ },
-	/* { I2C_BOARD_INFO("tlv320aic3x", 0x1b), }, */
-	/* { I2C_BOARD_INFO("tvp5146", 0x5d), }, */
+	},
+	/* { plus irq  }, */
+	{ I2C_BOARD_INFO("tlv320aic33", 0x1b), },
 };
 
 static void __init evm_init_i2c(void)
@@ -177,6 +181,72 @@ static struct platform_device dm355evm_dm9000 = {
 	.num_resources	= ARRAY_SIZE(dm355evm_dm9000_rsrc),
 };
 
+static struct tvp514x_platform_data tvp5146_pdata = {
+	.clk_polarity = 0,
+	.hs_polarity = 1,
+	.vs_polarity = 1
+};
+
+#define TVP514X_STD_ALL	(V4L2_STD_NTSC | V4L2_STD_PAL)
+/* Inputs available at the TVP5146 */
+static struct v4l2_input tvp5146_inputs[] = {
+	{
+		.index = 0,
+		.name = "Composite",
+		.type = V4L2_INPUT_TYPE_CAMERA,
+		.std = TVP514X_STD_ALL,
+	},
+	{
+		.index = 1,
+		.name = "S-Video",
+		.type = V4L2_INPUT_TYPE_CAMERA,
+		.std = TVP514X_STD_ALL,
+	},
+};
+
+/*
+ * this is the route info for connecting each input to decoder
+ * ouput that goes to vpfe. There is a one to one correspondence
+ * with tvp5146_inputs
+ */
+static struct vpfe_route tvp5146_routes[] = {
+	{
+		.input = INPUT_CVBS_VI2B,
+		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+	},
+	{
+		.input = INPUT_SVIDEO_VI2C_VI1C,
+		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+	},
+};
+
+static struct vpfe_subdev_info vpfe_sub_devs[] = {
+	{
+		.name = "tvp5146",
+		.grp_id = 0,
+		.num_inputs = ARRAY_SIZE(tvp5146_inputs),
+		.inputs = tvp5146_inputs,
+		.routes = tvp5146_routes,
+		.can_route = 1,
+		.ccdc_if_params = {
+			.if_type = VPFE_BT656,
+			.hdpol = VPFE_PINPOL_POSITIVE,
+			.vdpol = VPFE_PINPOL_POSITIVE,
+		},
+		.board_info = {
+			I2C_BOARD_INFO("tvp5146", 0x5d),
+			.platform_data = &tvp5146_pdata,
+		},
+	}
+};
+
+static struct vpfe_config vpfe_cfg = {
+	.num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
+	.sub_devs = vpfe_sub_devs,
+	.card_name = "DM355 EVM",
+	.ccdc = "DM355 CCDC",
+};
+
 static struct platform_device *davinci_evm_devices[] __initdata = {
 	&dm355evm_dm9000,
 	&davinci_nand_device,
@@ -188,6 +258,8 @@ static struct davinci_uart_config uart_config __initdata = {
 
 static void __init dm355_evm_map_io(void)
 {
+	/* setup input configuration for VPFE input devices */
+	dm355_set_vpfe_config(&vpfe_cfg);
 	dm355_init();
 }
 
@@ -279,6 +351,9 @@ static __init void dm355_evm_init(void)
 
 	dm355_init_spi0(BIT(0), dm355_evm_spi_info,
 			ARRAY_SIZE(dm355_evm_spi_info));
+
+	/* DM335 EVM uses ASP1; line-out is a stereo mini-jack */
+	dm355_init_asp1(ASP1_TX_EVT_EN | ASP1_RX_EVT_EN, &dm355_evm_snd_data);
 }
 
 static __init void dm355_evm_irq_init(void)

arch/arm/mach-davinci/board-dm365-evm.c

@@ -0,0 +1,492 @@
+/*
+ * TI DaVinci DM365 EVM board support
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/i2c/at24.h>
+#include <linux/leds.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/mux.h>
+#include <mach/hardware.h>
+#include <mach/dm365.h>
+#include <mach/psc.h>
+#include <mach/common.h>
+#include <mach/i2c.h>
+#include <mach/serial.h>
+#include <mach/common.h>
+#include <mach/mmc.h>
+#include <mach/nand.h>
+
+
+static inline int have_imager(void)
+{
+	/* REVISIT when it's supported, trigger via Kconfig */
+	return 0;
+}
+
+static inline int have_tvp7002(void)
+{
+	/* REVISIT when it's supported, trigger via Kconfig */
+	return 0;
+}
+
+
+#define DM365_ASYNC_EMIF_CONTROL_BASE	0x01d10000
+#define DM365_ASYNC_EMIF_DATA_CE0_BASE	0x02000000
+#define DM365_ASYNC_EMIF_DATA_CE1_BASE	0x04000000
+
+#define DM365_EVM_PHY_MASK		(0x2)
+#define DM365_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
+
+/*
+ * A MAX-II CPLD is used for various board control functions.
+ */
+#define CPLD_OFFSET(a13a8,a2a1)		(((a13a8) << 10) + ((a2a1) << 3))
+
+#define CPLD_VERSION	CPLD_OFFSET(0,0)	/* r/o */
+#define CPLD_TEST	CPLD_OFFSET(0,1)
+#define CPLD_LEDS	CPLD_OFFSET(0,2)
+#define CPLD_MUX	CPLD_OFFSET(0,3)
+#define CPLD_SWITCH	CPLD_OFFSET(1,0)	/* r/o */
+#define CPLD_POWER	CPLD_OFFSET(1,1)
+#define CPLD_VIDEO	CPLD_OFFSET(1,2)
+#define CPLD_CARDSTAT	CPLD_OFFSET(1,3)	/* r/o */
+
+#define CPLD_DILC_OUT	CPLD_OFFSET(2,0)
+#define CPLD_DILC_IN	CPLD_OFFSET(2,1)	/* r/o */
+
+#define CPLD_IMG_DIR0	CPLD_OFFSET(2,2)
+#define CPLD_IMG_MUX0	CPLD_OFFSET(2,3)
+#define CPLD_IMG_MUX1	CPLD_OFFSET(3,0)
+#define CPLD_IMG_DIR1	CPLD_OFFSET(3,1)
+#define CPLD_IMG_MUX2	CPLD_OFFSET(3,2)
+#define CPLD_IMG_MUX3	CPLD_OFFSET(3,3)
+#define CPLD_IMG_DIR2	CPLD_OFFSET(4,0)
+#define CPLD_IMG_MUX4	CPLD_OFFSET(4,1)
+#define CPLD_IMG_MUX5	CPLD_OFFSET(4,2)
+
+#define CPLD_RESETS	CPLD_OFFSET(4,3)
+
+#define CPLD_CCD_DIR1	CPLD_OFFSET(0x3e,0)
+#define CPLD_CCD_IO1	CPLD_OFFSET(0x3e,1)
+#define CPLD_CCD_DIR2	CPLD_OFFSET(0x3e,2)
+#define CPLD_CCD_IO2	CPLD_OFFSET(0x3e,3)
+#define CPLD_CCD_DIR3	CPLD_OFFSET(0x3f,0)
+#define CPLD_CCD_IO3	CPLD_OFFSET(0x3f,1)
+
+static void __iomem *cpld;
+
+
+/* NOTE:  this is geared for the standard config, with a socketed
+ * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors.  If you
+ * swap chips with a different block size, partitioning will
+ * need to be changed. This NAND chip MT29F16G08FAA is the default
+ * NAND shipped with the Spectrum Digital DM365 EVM
+ */
+#define NAND_BLOCK_SIZE		SZ_128K
+
+static struct mtd_partition davinci_nand_partitions[] = {
+	{
+		/* UBL (a few copies) plus U-Boot */
+		.name		= "bootloader",
+		.offset		= 0,
+		.size		= 28 * NAND_BLOCK_SIZE,
+		.mask_flags	= MTD_WRITEABLE, /* force read-only */
+	}, {
+		/* U-Boot environment */
+		.name		= "params",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 2 * NAND_BLOCK_SIZE,
+		.mask_flags	= 0,
+	}, {
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_4M,
+		.mask_flags	= 0,
+	}, {
+		.name		= "filesystem1",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_512M,
+		.mask_flags	= 0,
+	}, {
+		.name		= "filesystem2",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0,
+	}
+	/* two blocks with bad block table (and mirror) at the end */
+};
+
+static struct davinci_nand_pdata davinci_nand_data = {
+	.mask_chipsel		= BIT(14),
+	.parts			= davinci_nand_partitions,
+	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
+	.ecc_mode		= NAND_ECC_HW,
+	.options		= NAND_USE_FLASH_BBT,
+};
+
+static struct resource davinci_nand_resources[] = {
+	{
+		.start		= DM365_ASYNC_EMIF_DATA_CE0_BASE,
+		.end		= DM365_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= DM365_ASYNC_EMIF_CONTROL_BASE,
+		.end		= DM365_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device davinci_nand_device = {
+	.name			= "davinci_nand",
+	.id			= 0,
+	.num_resources		= ARRAY_SIZE(davinci_nand_resources),
+	.resource		= davinci_nand_resources,
+	.dev			= {
+		.platform_data	= &davinci_nand_data,
+	},
+};
+
+static struct at24_platform_data eeprom_info = {
+	.byte_len       = (256*1024) / 8,
+	.page_size      = 64,
+	.flags          = AT24_FLAG_ADDR16,
+	.setup          = davinci_get_mac_addr,
+	.context	= (void *)0x7f00,
+};
+
+static struct i2c_board_info i2c_info[] = {
+	{
+		I2C_BOARD_INFO("24c256", 0x50),
+		.platform_data	= &eeprom_info,
+	},
+};
+
+static struct davinci_i2c_platform_data i2c_pdata = {
+	.bus_freq	= 400	/* kHz */,
+	.bus_delay	= 0	/* usec */,
+};
+
+static int cpld_mmc_get_cd(int module)
+{
+	if (!cpld)
+		return -ENXIO;
+
+	/* low == card present */
+	return !(__raw_readb(cpld + CPLD_CARDSTAT) & BIT(module ? 4 : 0));
+}
+
+static int cpld_mmc_get_ro(int module)
+{
+	if (!cpld)
+		return -ENXIO;
+
+	/* high == card's write protect switch active */
+	return !!(__raw_readb(cpld + CPLD_CARDSTAT) & BIT(module ? 5 : 1));
+}
+
+static struct davinci_mmc_config dm365evm_mmc_config = {
+	.get_cd		= cpld_mmc_get_cd,
+	.get_ro		= cpld_mmc_get_ro,
+	.wires		= 4,
+	.max_freq	= 50000000,
+	.caps		= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
+	.version	= MMC_CTLR_VERSION_2,
+};
+
+static void dm365evm_emac_configure(void)
+{
+	/*
+	 * EMAC pins are multiplexed with GPIO and UART
+	 * Further details are available at the DM365 ARM
+	 * Subsystem Users Guide(sprufg5.pdf) pages 125 - 127
+	 */
+	davinci_cfg_reg(DM365_EMAC_TX_EN);
+	davinci_cfg_reg(DM365_EMAC_TX_CLK);
+	davinci_cfg_reg(DM365_EMAC_COL);
+	davinci_cfg_reg(DM365_EMAC_TXD3);
+	davinci_cfg_reg(DM365_EMAC_TXD2);
+	davinci_cfg_reg(DM365_EMAC_TXD1);
+	davinci_cfg_reg(DM365_EMAC_TXD0);
+	davinci_cfg_reg(DM365_EMAC_RXD3);
+	davinci_cfg_reg(DM365_EMAC_RXD2);
+	davinci_cfg_reg(DM365_EMAC_RXD1);
+	davinci_cfg_reg(DM365_EMAC_RXD0);
+	davinci_cfg_reg(DM365_EMAC_RX_CLK);
+	davinci_cfg_reg(DM365_EMAC_RX_DV);
+	davinci_cfg_reg(DM365_EMAC_RX_ER);
+	davinci_cfg_reg(DM365_EMAC_CRS);
+	davinci_cfg_reg(DM365_EMAC_MDIO);
+	davinci_cfg_reg(DM365_EMAC_MDCLK);
+
+	/*
+	 * EMAC interrupts are multiplexed with GPIO interrupts
+	 * Details are available at the DM365 ARM
+	 * Subsystem Users Guide(sprufg5.pdf) pages 133 - 134
+	 */
+	davinci_cfg_reg(DM365_INT_EMAC_RXTHRESH);
+	davinci_cfg_reg(DM365_INT_EMAC_RXPULSE);
+	davinci_cfg_reg(DM365_INT_EMAC_TXPULSE);
+	davinci_cfg_reg(DM365_INT_EMAC_MISCPULSE);
+}
+
+static void dm365evm_mmc_configure(void)
+{
+	/*
+	 * MMC/SD pins are multiplexed with GPIO and EMIF
+	 * Further details are available at the DM365 ARM
+	 * Subsystem Users Guide(sprufg5.pdf) pages 118, 128 - 131
+	 */
+	davinci_cfg_reg(DM365_SD1_CLK);
+	davinci_cfg_reg(DM365_SD1_CMD);
+	davinci_cfg_reg(DM365_SD1_DATA3);
+	davinci_cfg_reg(DM365_SD1_DATA2);
+	davinci_cfg_reg(DM365_SD1_DATA1);
+	davinci_cfg_reg(DM365_SD1_DATA0);
+}
+
+static void __init evm_init_i2c(void)
+{
+	davinci_init_i2c(&i2c_pdata);
+	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
+}
+
+static struct platform_device *dm365_evm_nand_devices[] __initdata = {
+	&davinci_nand_device,
+};
+
+static inline int have_leds(void)
+{
+#ifdef CONFIG_LEDS_CLASS
+	return 1;
+#else
+	return 0;
+#endif
+}
+
+struct cpld_led {
+	struct led_classdev	cdev;
+	u8			mask;
+};
+
+static const struct {
+	const char *name;
+	const char *trigger;
+} cpld_leds[] = {
+	{ "dm365evm::ds2", },
+	{ "dm365evm::ds3", },
+	{ "dm365evm::ds4", },
+	{ "dm365evm::ds5", },
+	{ "dm365evm::ds6", "nand-disk", },
+	{ "dm365evm::ds7", "mmc1", },
+	{ "dm365evm::ds8", "mmc0", },
+	{ "dm365evm::ds9", "heartbeat", },
+};
+
+static void cpld_led_set(struct led_classdev *cdev, enum led_brightness b)
+{
+	struct cpld_led *led = container_of(cdev, struct cpld_led, cdev);
+	u8 reg = __raw_readb(cpld + CPLD_LEDS);
+
+	if (b != LED_OFF)
+		reg &= ~led->mask;
+	else
+		reg |= led->mask;
+	__raw_writeb(reg, cpld + CPLD_LEDS);
+}
+
+static enum led_brightness cpld_led_get(struct led_classdev *cdev)
+{
+	struct cpld_led *led = container_of(cdev, struct cpld_led, cdev);
+	u8 reg = __raw_readb(cpld + CPLD_LEDS);
+
+	return (reg & led->mask) ? LED_OFF : LED_FULL;
+}
+
+static int __init cpld_leds_init(void)
+{
+	int	i;
+
+	if (!have_leds() ||  !cpld)
+		return 0;
+
+	/* setup LEDs */
+	__raw_writeb(0xff, cpld + CPLD_LEDS);
+	for (i = 0; i < ARRAY_SIZE(cpld_leds); i++) {
+		struct cpld_led *led;
+
+		led = kzalloc(sizeof(*led), GFP_KERNEL);
+		if (!led)
+			break;
+
+		led->cdev.name = cpld_leds[i].name;
+		led->cdev.brightness_set = cpld_led_set;
+		led->cdev.brightness_get = cpld_led_get;
+		led->cdev.default_trigger = cpld_leds[i].trigger;
+		led->mask = BIT(i);
+
+		if (led_classdev_register(NULL, &led->cdev) < 0) {
+			kfree(led);
+			break;
+		}
+	}
+
+	return 0;
+}
+/* run after subsys_initcall() for LEDs */
+fs_initcall(cpld_leds_init);
+
+
+static void __init evm_init_cpld(void)
+{
+	u8 mux, resets;
+	const char *label;
+	struct clk *aemif_clk;
+
+	/* Make sure we can configure the CPLD through CS1.  Then
+	 * leave it on for later access to MMC and LED registers.
+	 */
+	aemif_clk = clk_get(NULL, "aemif");
+	if (IS_ERR(aemif_clk))
+		return;
+	clk_enable(aemif_clk);
+
+	if (request_mem_region(DM365_ASYNC_EMIF_DATA_CE1_BASE, SECTION_SIZE,
+			"cpld") == NULL)
+		goto fail;
+	cpld = ioremap(DM365_ASYNC_EMIF_DATA_CE1_BASE, SECTION_SIZE);
+	if (!cpld) {
+		release_mem_region(DM365_ASYNC_EMIF_DATA_CE1_BASE,
+				SECTION_SIZE);
+fail:
+		pr_err("ERROR: can't map CPLD\n");
+		clk_disable(aemif_clk);
+		return;
+	}
+
+	/* External muxing for some signals */
+	mux = 0;
+
+	/* Read SW5 to set up NAND + keypad _or_ OneNAND (sync read).
+	 * NOTE:  SW4 bus width setting must match!
+	 */
+	if ((__raw_readb(cpld + CPLD_SWITCH) & BIT(5)) == 0) {
+		/* external keypad mux */
+		mux |= BIT(7);
+
+		platform_add_devices(dm365_evm_nand_devices,
+				ARRAY_SIZE(dm365_evm_nand_devices));
+	} else {
+		/* no OneNAND support yet */
+	}
+
+	/* Leave external chips in reset when unused. */
+	resets = BIT(3) | BIT(2) | BIT(1) | BIT(0);
+
+	/* Static video input config with SN74CBT16214 1-of-3 mux:
+	 *  - port b1 == tvp7002 (mux lowbits == 1 or 6)
+	 *  - port b2 == imager (mux lowbits == 2 or 7)
+	 *  - port b3 == tvp5146 (mux lowbits == 5)
+	 *
+	 * Runtime switching could work too, with limitations.
+	 */
+	if (have_imager()) {
+		label = "HD imager";
+		mux |= 1;
+
+		/* externally mux MMC1/ENET/AIC33 to imager */
+		mux |= BIT(6) | BIT(5) | BIT(3);
+	} else {
+		struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+		/* we can use MMC1 ... */
+		dm365evm_mmc_configure();
+		davinci_setup_mmc(1, &dm365evm_mmc_config);
+
+		/* ... and ENET ... */
+		dm365evm_emac_configure();
+		soc_info->emac_pdata->phy_mask = DM365_EVM_PHY_MASK;
+		soc_info->emac_pdata->mdio_max_freq = DM365_EVM_MDIO_FREQUENCY;
+		resets &= ~BIT(3);
+
+		/* ... and AIC33 */
+		resets &= ~BIT(1);
+
+		if (have_tvp7002()) {
+			mux |= 2;
+			resets &= ~BIT(2);
+			label = "tvp7002 HD";
+		} else {
+			/* default to tvp5146 */
+			mux |= 5;
+			resets &= ~BIT(0);
+			label = "tvp5146 SD";
+		}
+	}
+	__raw_writeb(mux, cpld + CPLD_MUX);
+	__raw_writeb(resets, cpld + CPLD_RESETS);
+	pr_info("EVM: %s video input\n", label);
+
+	/* REVISIT export switches: NTSC/PAL (SW5.6), EXTRA1 (SW5.2), etc */
+}
+
+static struct davinci_uart_config uart_config __initdata = {
+	.enabled_uarts = (1 << 0),
+};
+
+static void __init dm365_evm_map_io(void)
+{
+	dm365_init();
+}
+
+static __init void dm365_evm_init(void)
+{
+	evm_init_i2c();
+	davinci_serial_init(&uart_config);
+
+	dm365evm_emac_configure();
+	dm365evm_mmc_configure();
+
+	davinci_setup_mmc(0, &dm365evm_mmc_config);
+
+	/* maybe setup mmc1/etc ... _after_ mmc0 */
+	evm_init_cpld();
+}
+
+static __init void dm365_evm_irq_init(void)
+{
+	davinci_irq_init();
+}
+
+MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM")
+	.phys_io	= IO_PHYS,
+	.io_pg_offst	= (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+	.boot_params	= (0x80000100),
+	.map_io		= dm365_evm_map_io,
+	.init_irq	= dm365_evm_irq_init,
+	.timer		= &davinci_timer,
+	.init_machine	= dm365_evm_init,
+MACHINE_END
+

arch/arm/mach-davinci/board-dm644x-evm.c

@@ -28,6 +28,9 @@
 #include <linux/io.h>
 #include <linux/phy.h>
 #include <linux/clk.h>
+#include <linux/videodev2.h>
+
+#include <media/tvp514x.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -194,6 +197,72 @@ static struct platform_device davinci_fb_device = {
 	.num_resources = 0,
 };
 
+static struct tvp514x_platform_data tvp5146_pdata = {
+	.clk_polarity = 0,
+	.hs_polarity = 1,
+	.vs_polarity = 1
+};
+
+#define TVP514X_STD_ALL	(V4L2_STD_NTSC | V4L2_STD_PAL)
+/* Inputs available at the TVP5146 */
+static struct v4l2_input tvp5146_inputs[] = {
+	{
+		.index = 0,
+		.name = "Composite",
+		.type = V4L2_INPUT_TYPE_CAMERA,
+		.std = TVP514X_STD_ALL,
+	},
+	{
+		.index = 1,
+		.name = "S-Video",
+		.type = V4L2_INPUT_TYPE_CAMERA,
+		.std = TVP514X_STD_ALL,
+	},
+};
+
+/*
+ * this is the route info for connecting each input to decoder
+ * ouput that goes to vpfe. There is a one to one correspondence
+ * with tvp5146_inputs
+ */
+static struct vpfe_route tvp5146_routes[] = {
+	{
+		.input = INPUT_CVBS_VI2B,
+		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+	},
+	{
+		.input = INPUT_SVIDEO_VI2C_VI1C,
+		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+	},
+};
+
+static struct vpfe_subdev_info vpfe_sub_devs[] = {
+	{
+		.name = "tvp5146",
+		.grp_id = 0,
+		.num_inputs = ARRAY_SIZE(tvp5146_inputs),
+		.inputs = tvp5146_inputs,
+		.routes = tvp5146_routes,
+		.can_route = 1,
+		.ccdc_if_params = {
+			.if_type = VPFE_BT656,
+			.hdpol = VPFE_PINPOL_POSITIVE,
+			.vdpol = VPFE_PINPOL_POSITIVE,
+		},
+		.board_info = {
+			I2C_BOARD_INFO("tvp5146", 0x5d),
+			.platform_data = &tvp5146_pdata,
+		},
+	},
+};
+
+static struct vpfe_config vpfe_cfg = {
+	.num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
+	.sub_devs = vpfe_sub_devs,
+	.card_name = "DM6446 EVM",
+	.ccdc = "DM6446 CCDC",
+};
+
 static struct platform_device rtc_dev = {
 	.name           = "rtc_davinci_evm",
 	.id             = -1,
@@ -225,6 +294,8 @@ static struct platform_device ide_dev = {
 	},
 };
 
+static struct snd_platform_data dm644x_evm_snd_data;
+
 /*----------------------------------------------------------------------*/
 
 /*
@@ -557,10 +628,9 @@ static struct i2c_board_info __initdata i2c_info[] =  {
 		I2C_BOARD_INFO("24c256", 0x50),
 		.platform_data	= &eeprom_info,
 	},
-	/* ALSO:
-	 * - tvl320aic33 audio codec (0x1b)
-	 * - tvp5146 video decoder (0x5d)
-	 */
+	{
+		I2C_BOARD_INFO("tlv320aic33", 0x1b),
+	},
 };
 
 /* The msp430 uses a slow bitbanged I2C implementation (ergo 20 KHz),
@@ -590,6 +660,8 @@ static struct davinci_uart_config uart_config __initdata = {
 static void __init
 davinci_evm_map_io(void)
 {
+	/* setup input configuration for VPFE input devices */
+	dm644x_set_vpfe_config(&vpfe_cfg);
 	dm644x_init();
 }
 
@@ -666,6 +738,7 @@ static __init void davinci_evm_init(void)
 	davinci_setup_mmc(0, &dm6446evm_mmc_config);
 
 	davinci_serial_init(&uart_config);
+	dm644x_init_asp(&dm644x_evm_snd_data);
 
 	soc_info->emac_pdata->phy_mask = DM644X_EVM_PHY_MASK;
 	soc_info->emac_pdata->mdio_max_freq = DM644X_EVM_MDIO_FREQUENCY;

arch/arm/mach-davinci/board-dm646x-evm.c

@@ -34,6 +34,8 @@
 #include <linux/i2c/pcf857x.h>
 #include <linux/etherdevice.h>
 
+#include <media/tvp514x.h>
+
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -48,13 +50,89 @@
 #include <mach/mmc.h>
 #include <mach/emac.h>
 
+#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
+    defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
+#define HAS_ATA 1
+#else
+#define HAS_ATA 0
+#endif
+
+/* CPLD Register 0 bits to control ATA */
+#define DM646X_EVM_ATA_RST		BIT(0)
+#define DM646X_EVM_ATA_PWD		BIT(1)
+
 #define DM646X_EVM_PHY_MASK		(0x2)
 #define DM646X_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
 
+#define VIDCLKCTL_OFFSET	(DAVINCI_SYSTEM_MODULE_BASE + 0x38)
+#define VSCLKDIS_OFFSET		(DAVINCI_SYSTEM_MODULE_BASE + 0x6c)
+#define VCH2CLK_MASK		(BIT_MASK(10) | BIT_MASK(9) | BIT_MASK(8))
+#define VCH2CLK_SYSCLK8		(BIT(9))
+#define VCH2CLK_AUXCLK		(BIT(9) | BIT(8))
+#define VCH3CLK_MASK		(BIT_MASK(14) | BIT_MASK(13) | BIT_MASK(12))
+#define VCH3CLK_SYSCLK8		(BIT(13))
+#define VCH3CLK_AUXCLK		(BIT(14) | BIT(13))
+
+#define VIDCH2CLK		(BIT(10))
+#define VIDCH3CLK		(BIT(11))
+#define VIDCH1CLK		(BIT(4))
+#define TVP7002_INPUT		(BIT(4))
+#define TVP5147_INPUT		(~BIT(4))
+#define VPIF_INPUT_ONE_CHANNEL	(BIT(5))
+#define VPIF_INPUT_TWO_CHANNEL	(~BIT(5))
+#define TVP5147_CH0		"tvp514x-0"
+#define TVP5147_CH1		"tvp514x-1"
+
+static void __iomem *vpif_vidclkctl_reg;
+static void __iomem *vpif_vsclkdis_reg;
+/* spin lock for updating above registers */
+static spinlock_t vpif_reg_lock;
+
 static struct davinci_uart_config uart_config __initdata = {
 	.enabled_uarts = (1 << 0),
 };
 
+/* CPLD Register 0 Client: used for I/O Control */
+static int cpld_reg0_probe(struct i2c_client *client,
+			   const struct i2c_device_id *id)
+{
+	if (HAS_ATA) {
+		u8 data;
+		struct i2c_msg msg[2] = {
+			{
+				.addr = client->addr,
+				.flags = I2C_M_RD,
+				.len = 1,
+				.buf = &data,
+			},
+			{
+				.addr = client->addr,
+				.flags = 0,
+				.len = 1,
+				.buf = &data,
+			},
+		};
+
+		/* Clear ATA_RSTn and ATA_PWD bits to enable ATA operation. */
+		i2c_transfer(client->adapter, msg, 1);
+		data &= ~(DM646X_EVM_ATA_RST | DM646X_EVM_ATA_PWD);
+		i2c_transfer(client->adapter, msg + 1, 1);
+	}
+
+	return 0;
+}
+
+static const struct i2c_device_id cpld_reg_ids[] = {
+	{ "cpld_reg0", 0, },
+	{ },
+};
+
+static struct i2c_driver dm6467evm_cpld_driver = {
+	.driver.name	= "cpld_reg0",
+	.id_table	= cpld_reg_ids,
+	.probe		= cpld_reg0_probe,
+};
+
 /* LEDS */
 
 static struct gpio_led evm_leds[] = {
@@ -206,6 +284,69 @@ static struct at24_platform_data eeprom_info = {
 	.context	= (void *)0x7f00,
 };
 
+static u8 dm646x_iis_serializer_direction[] = {
+       TX_MODE, RX_MODE, INACTIVE_MODE, INACTIVE_MODE,
+};
+
+static u8 dm646x_dit_serializer_direction[] = {
+       TX_MODE,
+};
+
+static struct snd_platform_data dm646x_evm_snd_data[] = {
+	{
+		.tx_dma_offset  = 0x400,
+		.rx_dma_offset  = 0x400,
+		.op_mode        = DAVINCI_MCASP_IIS_MODE,
+		.num_serializer = ARRAY_SIZE(dm646x_iis_serializer_direction),
+		.tdm_slots      = 2,
+		.serial_dir     = dm646x_iis_serializer_direction,
+		.eventq_no      = EVENTQ_0,
+	},
+	{
+		.tx_dma_offset  = 0x400,
+		.rx_dma_offset  = 0,
+		.op_mode        = DAVINCI_MCASP_DIT_MODE,
+		.num_serializer = ARRAY_SIZE(dm646x_dit_serializer_direction),
+		.tdm_slots      = 32,
+		.serial_dir     = dm646x_dit_serializer_direction,
+		.eventq_no      = EVENTQ_0,
+	},
+};
+
+static struct i2c_client *cpld_client;
+
+static int cpld_video_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	cpld_client = client;
+	return 0;
+}
+
+static int __devexit cpld_video_remove(struct i2c_client *client)
+{
+	cpld_client = NULL;
+	return 0;
+}
+
+static const struct i2c_device_id cpld_video_id[] = {
+	{ "cpld_video", 0 },
+	{ }
+};
+
+static struct i2c_driver cpld_video_driver = {
+	.driver = {
+		.name	= "cpld_video",
+	},
+	.probe		= cpld_video_probe,
+	.remove		= cpld_video_remove,
+	.id_table	= cpld_video_id,
+};
+
+static void evm_init_cpld(void)
+{
+	i2c_add_driver(&cpld_video_driver);
+}
+
 static struct i2c_board_info __initdata i2c_info[] =  {
 	{
 		I2C_BOARD_INFO("24c256", 0x50),
@@ -215,6 +356,15 @@ static struct i2c_board_info __initdata i2c_info[] =  {
 		I2C_BOARD_INFO("pcf8574a", 0x38),
 		.platform_data	= &pcf_data,
 	},
+	{
+		I2C_BOARD_INFO("cpld_reg0", 0x3a),
+	},
+	{
+		I2C_BOARD_INFO("tlv320aic33", 0x18),
+	},
+	{
+		I2C_BOARD_INFO("cpld_video", 0x3b),
+	},
 };
 
 static struct davinci_i2c_platform_data i2c_pdata = {
@@ -222,10 +372,265 @@ static struct davinci_i2c_platform_data i2c_pdata = {
 	.bus_delay      = 0 /* usec */,
 };
 
+static int set_vpif_clock(int mux_mode, int hd)
+{
+	unsigned long flags;
+	unsigned int value;
+	int val = 0;
+	int err = 0;
+
+	if (!vpif_vidclkctl_reg || !vpif_vsclkdis_reg || !cpld_client)
+		return -ENXIO;
+
+	/* disable the clock */
+	spin_lock_irqsave(&vpif_reg_lock, flags);
+	value = __raw_readl(vpif_vsclkdis_reg);
+	value |= (VIDCH3CLK | VIDCH2CLK);
+	__raw_writel(value, vpif_vsclkdis_reg);
+	spin_unlock_irqrestore(&vpif_reg_lock, flags);
+
+	val = i2c_smbus_read_byte(cpld_client);
+	if (val < 0)
+		return val;
+
+	if (mux_mode == 1)
+		val &= ~0x40;
+	else
+		val |= 0x40;
+
+	err = i2c_smbus_write_byte(cpld_client, val);
+	if (err)
+		return err;
+
+	value = __raw_readl(vpif_vidclkctl_reg);
+	value &= ~(VCH2CLK_MASK);
+	value &= ~(VCH3CLK_MASK);
+
+	if (hd >= 1)
+		value |= (VCH2CLK_SYSCLK8 | VCH3CLK_SYSCLK8);
+	else
+		value |= (VCH2CLK_AUXCLK | VCH3CLK_AUXCLK);
+
+	__raw_writel(value, vpif_vidclkctl_reg);
+
+	spin_lock_irqsave(&vpif_reg_lock, flags);
+	value = __raw_readl(vpif_vsclkdis_reg);
+	/* enable the clock */
+	value &= ~(VIDCH3CLK | VIDCH2CLK);
+	__raw_writel(value, vpif_vsclkdis_reg);
+	spin_unlock_irqrestore(&vpif_reg_lock, flags);
+
+	return 0;
+}
+
+static struct vpif_subdev_info dm646x_vpif_subdev[] = {
+	{
+		.name	= "adv7343",
+		.board_info = {
+			I2C_BOARD_INFO("adv7343", 0x2a),
+		},
+	},
+	{
+		.name	= "ths7303",
+		.board_info = {
+			I2C_BOARD_INFO("ths7303", 0x2c),
+		},
+	},
+};
+
+static const char *output[] = {
+	"Composite",
+	"Component",
+	"S-Video",
+};
+
+static struct vpif_display_config dm646x_vpif_display_config = {
+	.set_clock	= set_vpif_clock,
+	.subdevinfo	= dm646x_vpif_subdev,
+	.subdev_count	= ARRAY_SIZE(dm646x_vpif_subdev),
+	.output		= output,
+	.output_count	= ARRAY_SIZE(output),
+	.card_name	= "DM646x EVM",
+};
+
+/**
+ * setup_vpif_input_path()
+ * @channel: channel id (0 - CH0, 1 - CH1)
+ * @sub_dev_name: ptr sub device name
+ *
+ * This will set vpif input to capture data from tvp514x or
+ * tvp7002.
+ */
+static int setup_vpif_input_path(int channel, const char *sub_dev_name)
+{
+	int err = 0;
+	int val;
+
+	/* for channel 1, we don't do anything */
+	if (channel != 0)
+		return 0;
+
+	if (!cpld_client)
+		return -ENXIO;
+
+	val = i2c_smbus_read_byte(cpld_client);
+	if (val < 0)
+		return val;
+
+	if (!strcmp(sub_dev_name, TVP5147_CH0) ||
+	    !strcmp(sub_dev_name, TVP5147_CH1))
+		val &= TVP5147_INPUT;
+	else
+		val |= TVP7002_INPUT;
+
+	err = i2c_smbus_write_byte(cpld_client, val);
+	if (err)
+		return err;
+	return 0;
+}
+
+/**
+ * setup_vpif_input_channel_mode()
+ * @mux_mode:  mux mode. 0 - 1 channel or (1) - 2 channel
+ *
+ * This will setup input mode to one channel (TVP7002) or 2 channel (TVP5147)
+ */
+static int setup_vpif_input_channel_mode(int mux_mode)
+{
+	unsigned long flags;
+	int err = 0;
+	int val;
+	u32 value;
+
+	if (!vpif_vsclkdis_reg || !cpld_client)
+		return -ENXIO;
+
+	val = i2c_smbus_read_byte(cpld_client);
+	if (val < 0)
+		return val;
+
+	spin_lock_irqsave(&vpif_reg_lock, flags);
+	value = __raw_readl(vpif_vsclkdis_reg);
+	if (mux_mode) {
+		val &= VPIF_INPUT_TWO_CHANNEL;
+		value |= VIDCH1CLK;
+	} else {
+		val |= VPIF_INPUT_ONE_CHANNEL;
+		value &= ~VIDCH1CLK;
+	}
+	__raw_writel(value, vpif_vsclkdis_reg);
+	spin_unlock_irqrestore(&vpif_reg_lock, flags);
+
+	err = i2c_smbus_write_byte(cpld_client, val);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static struct tvp514x_platform_data tvp5146_pdata = {
+	.clk_polarity = 0,
+	.hs_polarity = 1,
+	.vs_polarity = 1
+};
+
+#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
+
+static struct vpif_subdev_info vpif_capture_sdev_info[] = {
+	{
+		.name	= TVP5147_CH0,
+		.board_info = {
+			I2C_BOARD_INFO("tvp5146", 0x5d),
+			.platform_data = &tvp5146_pdata,
+		},
+		.input = INPUT_CVBS_VI2B,
+		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+		.can_route = 1,
+		.vpif_if = {
+			.if_type = VPIF_IF_BT656,
+			.hd_pol = 1,
+			.vd_pol = 1,
+			.fid_pol = 0,
+		},
+	},
+	{
+		.name	= TVP5147_CH1,
+		.board_info = {
+			I2C_BOARD_INFO("tvp5146", 0x5c),
+			.platform_data = &tvp5146_pdata,
+		},
+		.input = INPUT_SVIDEO_VI2C_VI1C,
+		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+		.can_route = 1,
+		.vpif_if = {
+			.if_type = VPIF_IF_BT656,
+			.hd_pol = 1,
+			.vd_pol = 1,
+			.fid_pol = 0,
+		},
+	},
+};
+
+static const struct vpif_input dm6467_ch0_inputs[] = {
+	{
+		.input = {
+			.index = 0,
+			.name = "Composite",
+			.type = V4L2_INPUT_TYPE_CAMERA,
+			.std = TVP514X_STD_ALL,
+		},
+		.subdev_name = TVP5147_CH0,
+	},
+};
+
+static const struct vpif_input dm6467_ch1_inputs[] = {
+       {
+		.input = {
+			.index = 0,
+			.name = "S-Video",
+			.type = V4L2_INPUT_TYPE_CAMERA,
+			.std = TVP514X_STD_ALL,
+		},
+		.subdev_name = TVP5147_CH1,
+	},
+};
+
+static struct vpif_capture_config dm646x_vpif_capture_cfg = {
+	.setup_input_path = setup_vpif_input_path,
+	.setup_input_channel_mode = setup_vpif_input_channel_mode,
+	.subdev_info = vpif_capture_sdev_info,
+	.subdev_count = ARRAY_SIZE(vpif_capture_sdev_info),
+	.chan_config[0] = {
+		.inputs = dm6467_ch0_inputs,
+		.input_count = ARRAY_SIZE(dm6467_ch0_inputs),
+	},
+	.chan_config[1] = {
+		.inputs = dm6467_ch1_inputs,
+		.input_count = ARRAY_SIZE(dm6467_ch1_inputs),
+	},
+};
+
+static void __init evm_init_video(void)
+{
+	vpif_vidclkctl_reg = ioremap(VIDCLKCTL_OFFSET, 4);
+	vpif_vsclkdis_reg = ioremap(VSCLKDIS_OFFSET, 4);
+	if (!vpif_vidclkctl_reg || !vpif_vsclkdis_reg) {
+		pr_err("Can't map VPIF VIDCLKCTL or VSCLKDIS registers\n");
+		return;
+	}
+	spin_lock_init(&vpif_reg_lock);
+
+	dm646x_setup_vpif(&dm646x_vpif_display_config,
+			  &dm646x_vpif_capture_cfg);
+}
+
 static void __init evm_init_i2c(void)
 {
 	davinci_init_i2c(&i2c_pdata);
+	i2c_add_driver(&dm6467evm_cpld_driver);
 	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
+	evm_init_cpld();
+	evm_init_video();
 }
 
 static void __init davinci_map_io(void)
@@ -239,6 +644,11 @@ static __init void evm_init(void)
 
 	evm_init_i2c();
 	davinci_serial_init(&uart_config);
+	dm646x_init_mcasp0(&dm646x_evm_snd_data[0]);
+	dm646x_init_mcasp1(&dm646x_evm_snd_data[1]);
+
+	if (HAS_ATA)
+		dm646x_init_ide();
 
 	soc_info->emac_pdata->phy_mask = DM646X_EVM_PHY_MASK;
 	soc_info->emac_pdata->mdio_max_freq = DM646X_EVM_MDIO_FREQUENCY;

arch/arm/mach-davinci/clock.c

@@ -227,7 +227,10 @@ static void __init clk_pll_init(struct clk *clk)
 	if (ctrl & PLLCTL_PLLEN) {
 		bypass = 0;
 		mult = __raw_readl(pll->base + PLLM);
-		mult = (mult & PLLM_PLLM_MASK) + 1;
+		if (cpu_is_davinci_dm365())
+			mult = 2 * (mult & PLLM_PLLM_MASK);
+		else
+			mult = (mult & PLLM_PLLM_MASK) + 1;
 	} else
 		bypass = 1;
 

arch/arm/mach-davinci/da830.c

@@ -0,0 +1,1205 @@
+/*
+ * TI DA830/OMAP L137 chip specific setup
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2009 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/clock.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
+#include <mach/irqs.h>
+#include <mach/cputype.h>
+#include <mach/common.h>
+#include <mach/time.h>
+#include <mach/da8xx.h>
+#include <mach/asp.h>
+
+#include "clock.h"
+#include "mux.h"
+
+/* Offsets of the 8 compare registers on the da830 */
+#define DA830_CMP12_0		0x60
+#define DA830_CMP12_1		0x64
+#define DA830_CMP12_2		0x68
+#define DA830_CMP12_3		0x6c
+#define DA830_CMP12_4		0x70
+#define DA830_CMP12_5		0x74
+#define DA830_CMP12_6		0x78
+#define DA830_CMP12_7		0x7c
+
+#define DA830_REF_FREQ		24000000
+
+static struct pll_data pll0_data = {
+	.num		= 1,
+	.phys_base	= DA8XX_PLL0_BASE,
+	.flags		= PLL_HAS_PREDIV | PLL_HAS_POSTDIV,
+};
+
+static struct clk ref_clk = {
+	.name		= "ref_clk",
+	.rate		= DA830_REF_FREQ,
+};
+
+static struct clk pll0_clk = {
+	.name		= "pll0",
+	.parent		= &ref_clk,
+	.pll_data	= &pll0_data,
+	.flags		= CLK_PLL,
+};
+
+static struct clk pll0_aux_clk = {
+	.name		= "pll0_aux_clk",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL | PRE_PLL,
+};
+
+static struct clk pll0_sysclk2 = {
+	.name		= "pll0_sysclk2",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV2,
+};
+
+static struct clk pll0_sysclk3 = {
+	.name		= "pll0_sysclk3",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV3,
+};
+
+static struct clk pll0_sysclk4 = {
+	.name		= "pll0_sysclk4",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV4,
+};
+
+static struct clk pll0_sysclk5 = {
+	.name		= "pll0_sysclk5",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV5,
+};
+
+static struct clk pll0_sysclk6 = {
+	.name		= "pll0_sysclk6",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV6,
+};
+
+static struct clk pll0_sysclk7 = {
+	.name		= "pll0_sysclk7",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV7,
+};
+
+static struct clk i2c0_clk = {
+	.name		= "i2c0",
+	.parent		= &pll0_aux_clk,
+};
+
+static struct clk timerp64_0_clk = {
+	.name		= "timer0",
+	.parent		= &pll0_aux_clk,
+};
+
+static struct clk timerp64_1_clk = {
+	.name		= "timer1",
+	.parent		= &pll0_aux_clk,
+};
+
+static struct clk arm_rom_clk = {
+	.name		= "arm_rom",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_ARM_RAM_ROM,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk scr0_ss_clk = {
+	.name		= "scr0_ss",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_SCR0_SS,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk scr1_ss_clk = {
+	.name		= "scr1_ss",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_SCR1_SS,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk scr2_ss_clk = {
+	.name		= "scr2_ss",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_SCR2_SS,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk dmax_clk = {
+	.name		= "dmax",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_DMAX,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk tpcc_clk = {
+	.name		= "tpcc",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_TPCC,
+	.flags		= ALWAYS_ENABLED | CLK_PSC,
+};
+
+static struct clk tptc0_clk = {
+	.name		= "tptc0",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_TPTC0,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk tptc1_clk = {
+	.name		= "tptc1",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_TPTC1,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk mmcsd_clk = {
+	.name		= "mmcsd",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_MMC_SD,
+};
+
+static struct clk uart0_clk = {
+	.name		= "uart0",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_UART0,
+};
+
+static struct clk uart1_clk = {
+	.name		= "uart1",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_UART1,
+	.psc_ctlr	= 1,
+};
+
+static struct clk uart2_clk = {
+	.name		= "uart2",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_UART2,
+	.psc_ctlr	= 1,
+};
+
+static struct clk spi0_clk = {
+	.name		= "spi0",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_SPI0,
+};
+
+static struct clk spi1_clk = {
+	.name		= "spi1",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_SPI1,
+	.psc_ctlr	= 1,
+};
+
+static struct clk ecap0_clk = {
+	.name		= "ecap0",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_ECAP,
+	.psc_ctlr	= 1,
+};
+
+static struct clk ecap1_clk = {
+	.name		= "ecap1",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_ECAP,
+	.psc_ctlr	= 1,
+};
+
+static struct clk ecap2_clk = {
+	.name		= "ecap2",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_ECAP,
+	.psc_ctlr	= 1,
+};
+
+static struct clk pwm0_clk = {
+	.name		= "pwm0",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_PWM,
+	.psc_ctlr	= 1,
+};
+
+static struct clk pwm1_clk = {
+	.name		= "pwm1",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_PWM,
+	.psc_ctlr	= 1,
+};
+
+static struct clk pwm2_clk = {
+	.name		= "pwm2",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_PWM,
+	.psc_ctlr	= 1,
+};
+
+static struct clk eqep0_clk = {
+	.name		= "eqep0",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA830_LPSC1_EQEP,
+	.psc_ctlr	= 1,
+};
+
+static struct clk eqep1_clk = {
+	.name		= "eqep1",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA830_LPSC1_EQEP,
+	.psc_ctlr	= 1,
+};
+
+static struct clk lcdc_clk = {
+	.name		= "lcdc",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_LCDC,
+	.psc_ctlr	= 1,
+};
+
+static struct clk mcasp0_clk = {
+	.name		= "mcasp0",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_McASP0,
+	.psc_ctlr	= 1,
+};
+
+static struct clk mcasp1_clk = {
+	.name		= "mcasp1",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA830_LPSC1_McASP1,
+	.psc_ctlr	= 1,
+};
+
+static struct clk mcasp2_clk = {
+	.name		= "mcasp2",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA830_LPSC1_McASP2,
+	.psc_ctlr	= 1,
+};
+
+static struct clk usb20_clk = {
+	.name		= "usb20",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_USB20,
+	.psc_ctlr	= 1,
+};
+
+static struct clk aemif_clk = {
+	.name		= "aemif",
+	.parent		= &pll0_sysclk3,
+	.lpsc		= DA8XX_LPSC0_EMIF25,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk aintc_clk = {
+	.name		= "aintc",
+	.parent		= &pll0_sysclk4,
+	.lpsc		= DA8XX_LPSC0_AINTC,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk secu_mgr_clk = {
+	.name		= "secu_mgr",
+	.parent		= &pll0_sysclk4,
+	.lpsc		= DA8XX_LPSC0_SECU_MGR,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk emac_clk = {
+	.name		= "emac",
+	.parent		= &pll0_sysclk4,
+	.lpsc		= DA8XX_LPSC1_CPGMAC,
+	.psc_ctlr	= 1,
+};
+
+static struct clk gpio_clk = {
+	.name		= "gpio",
+	.parent		= &pll0_sysclk4,
+	.lpsc		= DA8XX_LPSC1_GPIO,
+	.psc_ctlr	= 1,
+};
+
+static struct clk i2c1_clk = {
+	.name		= "i2c1",
+	.parent		= &pll0_sysclk4,
+	.lpsc		= DA8XX_LPSC1_I2C,
+	.psc_ctlr	= 1,
+};
+
+static struct clk usb11_clk = {
+	.name		= "usb11",
+	.parent		= &pll0_sysclk4,
+	.lpsc		= DA8XX_LPSC1_USB11,
+	.psc_ctlr	= 1,
+};
+
+static struct clk emif3_clk = {
+	.name		= "emif3",
+	.parent		= &pll0_sysclk5,
+	.lpsc		= DA8XX_LPSC1_EMIF3C,
+	.flags		= ALWAYS_ENABLED,
+	.psc_ctlr	= 1,
+};
+
+static struct clk arm_clk = {
+	.name		= "arm",
+	.parent		= &pll0_sysclk6,
+	.lpsc		= DA8XX_LPSC0_ARM,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk rmii_clk = {
+	.name		= "rmii",
+	.parent		= &pll0_sysclk7,
+};
+
+static struct davinci_clk da830_clks[] = {
+	CLK(NULL,		"ref",		&ref_clk),
+	CLK(NULL,		"pll0",		&pll0_clk),
+	CLK(NULL,		"pll0_aux",	&pll0_aux_clk),
+	CLK(NULL,		"pll0_sysclk2",	&pll0_sysclk2),
+	CLK(NULL,		"pll0_sysclk3",	&pll0_sysclk3),
+	CLK(NULL,		"pll0_sysclk4",	&pll0_sysclk4),
+	CLK(NULL,		"pll0_sysclk5",	&pll0_sysclk5),
+	CLK(NULL,		"pll0_sysclk6",	&pll0_sysclk6),
+	CLK(NULL,		"pll0_sysclk7",	&pll0_sysclk7),
+	CLK("i2c_davinci.1",	NULL,		&i2c0_clk),
+	CLK(NULL,		"timer0",	&timerp64_0_clk),
+	CLK("watchdog",		NULL,		&timerp64_1_clk),
+	CLK(NULL,		"arm_rom",	&arm_rom_clk),
+	CLK(NULL,		"scr0_ss",	&scr0_ss_clk),
+	CLK(NULL,		"scr1_ss",	&scr1_ss_clk),
+	CLK(NULL,		"scr2_ss",	&scr2_ss_clk),
+	CLK(NULL,		"dmax",		&dmax_clk),
+	CLK(NULL,		"tpcc",		&tpcc_clk),
+	CLK(NULL,		"tptc0",	&tptc0_clk),
+	CLK(NULL,		"tptc1",	&tptc1_clk),
+	CLK("davinci_mmc.0",	NULL,		&mmcsd_clk),
+	CLK(NULL,		"uart0",	&uart0_clk),
+	CLK(NULL,		"uart1",	&uart1_clk),
+	CLK(NULL,		"uart2",	&uart2_clk),
+	CLK("dm_spi.0",		NULL,		&spi0_clk),
+	CLK("dm_spi.1",		NULL,		&spi1_clk),
+	CLK(NULL,		"ecap0",	&ecap0_clk),
+	CLK(NULL,		"ecap1",	&ecap1_clk),
+	CLK(NULL,		"ecap2",	&ecap2_clk),
+	CLK(NULL,		"pwm0",		&pwm0_clk),
+	CLK(NULL,		"pwm1",		&pwm1_clk),
+	CLK(NULL,		"pwm2",		&pwm2_clk),
+	CLK("eqep.0",		NULL,		&eqep0_clk),
+	CLK("eqep.1",		NULL,		&eqep1_clk),
+	CLK("da830_lcdc",	NULL,		&lcdc_clk),
+	CLK("davinci-mcasp.0",	NULL,		&mcasp0_clk),
+	CLK("davinci-mcasp.1",	NULL,		&mcasp1_clk),
+	CLK("davinci-mcasp.2",	NULL,		&mcasp2_clk),
+	CLK("musb_hdrc",	NULL,		&usb20_clk),
+	CLK(NULL,		"aemif",	&aemif_clk),
+	CLK(NULL,		"aintc",	&aintc_clk),
+	CLK(NULL,		"secu_mgr",	&secu_mgr_clk),
+	CLK("davinci_emac.1",	NULL,		&emac_clk),
+	CLK(NULL,		"gpio",		&gpio_clk),
+	CLK("i2c_davinci.2",	NULL,		&i2c1_clk),
+	CLK(NULL,		"usb11",	&usb11_clk),
+	CLK(NULL,		"emif3",	&emif3_clk),
+	CLK(NULL,		"arm",		&arm_clk),
+	CLK(NULL,		"rmii",		&rmii_clk),
+	CLK(NULL,		NULL,		NULL),
+};
+
+/*
+ * Device specific mux setup
+ *
+ *	     soc      description	mux    mode    mode   mux	dbg
+ *					reg   offset   mask   mode
+ */
+static const struct mux_config da830_pins[] = {
+#ifdef CONFIG_DAVINCI_MUX
+	MUX_CFG(DA830, GPIO7_14,	0,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, RTCK,		0,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_15,	0,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, EMU_0,		0,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, EMB_SDCKE,	0,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_CLK_GLUE,	0,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_CLK,		0,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, NEMB_CS_0,	0,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMB_CAS,	0,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMB_RAS,	0,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMB_WE,		0,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_BA_1,	1,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_BA_0,	1,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_A_0,		1,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_A_1,		1,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_A_2,		1,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_A_3,		1,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_A_4,		1,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_A_5,		1,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, GPIO7_0,		1,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_1,		1,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_2,		1,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_3,		1,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_4,		1,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_5,		1,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_6,		1,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_7,		1,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, EMB_A_6,		2,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_A_7,		2,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_A_8,		2,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_A_9,		2,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_A_10,	2,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_A_11,	2,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_A_12,	2,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_31,	2,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, GPIO7_8,		2,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_9,		2,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_10,	2,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_11,	2,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_12,	2,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_13,	2,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_13,	2,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, EMB_D_30,	3,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_29,	3,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_28,	3,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_27,	3,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_26,	3,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_25,	3,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_24,	3,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_23,	3,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_22,	4,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_21,	4,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_20,	4,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_19,	4,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_18,	4,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_17,	4,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_16,	4,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMB_WE_DQM_3,	4,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMB_WE_DQM_2,	5,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_0,		5,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_1,		5,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_2,		5,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_3,		5,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_4,		5,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_5,		5,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_6,		5,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, GPIO6_0,		5,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_1,		5,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_2,		5,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_3,		5,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_4,		5,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_5,		5,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_6,		5,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, EMB_D_7,		6,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_8,		6,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_9,		6,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_10,	6,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_11,	6,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_12,	6,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_13,	6,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_14,	6,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, GPIO6_7,		6,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_8,		6,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_9,		6,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_10,	6,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_11,	6,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_12,	6,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_13,	6,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_14,	6,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, EMB_D_15,	7,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMB_WE_DQM_1,	7,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMB_WE_DQM_0,	7,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, SPI0_SOMI_0,	7,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, SPI0_SIMO_0,	7,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, SPI0_CLK,	7,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, NSPI0_ENA,	7,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, NSPI0_SCS_0,	7,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, EQEP0I,		7,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, EQEP0S,		7,	16,	0xf,	2,	false)
+	MUX_CFG(DA830, EQEP1I,		7,	20,	0xf,	2,	false)
+	MUX_CFG(DA830, NUART0_CTS,	7,	24,	0xf,	2,	false)
+	MUX_CFG(DA830, NUART0_RTS,	7,	28,	0xf,	2,	false)
+	MUX_CFG(DA830, EQEP0A,		7,	24,	0xf,	4,	false)
+	MUX_CFG(DA830, EQEP0B,		7,	28,	0xf,	4,	false)
+	MUX_CFG(DA830, GPIO6_15,	7,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_14,	7,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_15,	7,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_0,		7,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_1,		7,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_2,		7,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_3,		7,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_4,		7,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, SPI1_SOMI_0,	8,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, SPI1_SIMO_0,	8,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, SPI1_CLK,	8,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, UART0_RXD,	8,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, UART0_TXD,	8,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR1_10,		8,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR1_11,		8,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, NSPI1_ENA,	8,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, I2C1_SCL,	8,	0,	0xf,	2,	false)
+	MUX_CFG(DA830, I2C1_SDA,	8,	4,	0xf,	2,	false)
+	MUX_CFG(DA830, EQEP1S,		8,	8,	0xf,	2,	false)
+	MUX_CFG(DA830, I2C0_SDA,	8,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, I2C0_SCL,	8,	16,	0xf,	2,	false)
+	MUX_CFG(DA830, UART2_RXD,	8,	28,	0xf,	2,	false)
+	MUX_CFG(DA830, TM64P0_IN12,	8,	12,	0xf,	4,	false)
+	MUX_CFG(DA830, TM64P0_OUT12,	8,	16,	0xf,	4,	false)
+	MUX_CFG(DA830, GPIO5_5,		8,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_6,		8,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_7,		8,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_8,		8,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_9,		8,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_10,	8,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_11,	8,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_12,	8,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, NSPI1_SCS_0,	9,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, USB0_DRVVBUS,	9,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, AHCLKX0,		9,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, ACLKX0,		9,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, AFSX0,		9,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, AHCLKR0,		9,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, ACLKR0,		9,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, AFSR0,		9,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, UART2_TXD,	9,	0,	0xf,	2,	false)
+	MUX_CFG(DA830, AHCLKX2,		9,	8,	0xf,	2,	false)
+	MUX_CFG(DA830, ECAP0_APWM0,	9,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, RMII_MHZ_50_CLK,	9,	20,	0xf,	2,	false)
+	MUX_CFG(DA830, ECAP1_APWM1,	9,	24,	0xf,	2,	false)
+	MUX_CFG(DA830, USB_REFCLKIN,	9,	8,	0xf,	4,	false)
+	MUX_CFG(DA830, GPIO5_13,	9,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_15,	9,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_11,	9,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_12,	9,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_13,	9,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_14,	9,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_15,	9,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_12,	9,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, AMUTE0,		10,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR0_0,		10,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR0_1,		10,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR0_2,		10,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR0_3,		10,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR0_4,		10,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR0_5,		10,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR0_6,		10,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, RMII_TXD_0,	10,	4,	0xf,	2,	false)
+	MUX_CFG(DA830, RMII_TXD_1,	10,	8,	0xf,	2,	false)
+	MUX_CFG(DA830, RMII_TXEN,	10,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, RMII_CRS_DV,	10,	16,	0xf,	2,	false)
+	MUX_CFG(DA830, RMII_RXD_0,	10,	20,	0xf,	2,	false)
+	MUX_CFG(DA830, RMII_RXD_1,	10,	24,	0xf,	2,	false)
+	MUX_CFG(DA830, RMII_RXER,	10,	28,	0xf,	2,	false)
+	MUX_CFG(DA830, AFSR2,		10,	4,	0xf,	4,	false)
+	MUX_CFG(DA830, ACLKX2,		10,	8,	0xf,	4,	false)
+	MUX_CFG(DA830, AXR2_3,		10,	12,	0xf,	4,	false)
+	MUX_CFG(DA830, AXR2_2,		10,	16,	0xf,	4,	false)
+	MUX_CFG(DA830, AXR2_1,		10,	20,	0xf,	4,	false)
+	MUX_CFG(DA830, AFSX2,		10,	24,	0xf,	4,	false)
+	MUX_CFG(DA830, ACLKR2,		10,	28,	0xf,	4,	false)
+	MUX_CFG(DA830, NRESETOUT,	10,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_0,		10,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_1,		10,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_2,		10,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_3,		10,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_4,		10,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_5,		10,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_6,		10,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, AXR0_7,		11,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR0_8,		11,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, UART1_RXD,	11,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, UART1_TXD,	11,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR0_11,		11,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, AHCLKX1,		11,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, ACLKX1,		11,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, AFSX1,		11,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, MDIO_CLK,	11,	0,	0xf,	2,	false)
+	MUX_CFG(DA830, MDIO_D,		11,	4,	0xf,	2,	false)
+	MUX_CFG(DA830, AXR0_9,		11,	8,	0xf,	2,	false)
+	MUX_CFG(DA830, AXR0_10,		11,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, EPWM0B,		11,	20,	0xf,	2,	false)
+	MUX_CFG(DA830, EPWM0A,		11,	24,	0xf,	2,	false)
+	MUX_CFG(DA830, EPWMSYNCI,	11,	28,	0xf,	2,	false)
+	MUX_CFG(DA830, AXR2_0,		11,	16,	0xf,	4,	false)
+	MUX_CFG(DA830, EPWMSYNC0,	11,	28,	0xf,	4,	false)
+	MUX_CFG(DA830, GPIO3_7,		11,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_8,		11,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_9,		11,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_10,	11,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_11,	11,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_14,	11,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_15,	11,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_10,	11,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, AHCLKR1,		12,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, ACLKR1,		12,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, AFSR1,		12,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, AMUTE1,		12,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR1_0,		12,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR1_1,		12,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR1_2,		12,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR1_3,		12,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, ECAP2_APWM2,	12,	4,	0xf,	2,	false)
+	MUX_CFG(DA830, EHRPWMGLUETZ,	12,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, EQEP1A,		12,	28,	0xf,	2,	false)
+	MUX_CFG(DA830, GPIO4_11,	12,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_12,	12,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_13,	12,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_14,	12,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_0,		12,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_1,		12,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_2,		12,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_3,		12,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, AXR1_4,		13,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR1_5,		13,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR1_6,		13,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR1_7,		13,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR1_8,		13,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR1_9,		13,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_0,		13,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_1,		13,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, EQEP1B,		13,	0,	0xf,	2,	false)
+	MUX_CFG(DA830, EPWM2B,		13,	4,	0xf,	2,	false)
+	MUX_CFG(DA830, EPWM2A,		13,	8,	0xf,	2,	false)
+	MUX_CFG(DA830, EPWM1B,		13,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, EPWM1A,		13,	16,	0xf,	2,	false)
+	MUX_CFG(DA830, MMCSD_DAT_0,	13,	24,	0xf,	2,	false)
+	MUX_CFG(DA830, MMCSD_DAT_1,	13,	28,	0xf,	2,	false)
+	MUX_CFG(DA830, UHPI_HD_0,	13,	24,	0xf,	4,	false)
+	MUX_CFG(DA830, UHPI_HD_1,	13,	28,	0xf,	4,	false)
+	MUX_CFG(DA830, GPIO4_4,		13,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_5,		13,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_6,		13,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_7,		13,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_8,		13,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_9,		13,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_0,		13,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_1,		13,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, EMA_D_2,		14,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_3,		14,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_4,		14,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_5,		14,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_6,		14,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_7,		14,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_8,		14,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_9,		14,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, MMCSD_DAT_2,	14,	0,	0xf,	2,	false)
+	MUX_CFG(DA830, MMCSD_DAT_3,	14,	4,	0xf,	2,	false)
+	MUX_CFG(DA830, MMCSD_DAT_4,	14,	8,	0xf,	2,	false)
+	MUX_CFG(DA830, MMCSD_DAT_5,	14,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, MMCSD_DAT_6,	14,	16,	0xf,	2,	false)
+	MUX_CFG(DA830, MMCSD_DAT_7,	14,	20,	0xf,	2,	false)
+	MUX_CFG(DA830, UHPI_HD_8,	14,	24,	0xf,	2,	false)
+	MUX_CFG(DA830, UHPI_HD_9,	14,	28,	0xf,	2,	false)
+	MUX_CFG(DA830, UHPI_HD_2,	14,	0,	0xf,	4,	false)
+	MUX_CFG(DA830, UHPI_HD_3,	14,	4,	0xf,	4,	false)
+	MUX_CFG(DA830, UHPI_HD_4,	14,	8,	0xf,	4,	false)
+	MUX_CFG(DA830, UHPI_HD_5,	14,	12,	0xf,	4,	false)
+	MUX_CFG(DA830, UHPI_HD_6,	14,	16,	0xf,	4,	false)
+	MUX_CFG(DA830, UHPI_HD_7,	14,	20,	0xf,	4,	false)
+	MUX_CFG(DA830, LCD_D_8,		14,	24,	0xf,	4,	false)
+	MUX_CFG(DA830, LCD_D_9,		14,	28,	0xf,	4,	false)
+	MUX_CFG(DA830, GPIO0_2,		14,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_3,		14,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_4,		14,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_5,		14,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_6,		14,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_7,		14,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_8,		14,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_9,		14,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, EMA_D_10,	15,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_11,	15,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_12,	15,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_13,	15,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_14,	15,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_15,	15,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_A_0,		15,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_A_1,		15,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, UHPI_HD_10,	15,	0,	0xf,	2,	false)
+	MUX_CFG(DA830, UHPI_HD_11,	15,	4,	0xf,	2,	false)
+	MUX_CFG(DA830, UHPI_HD_12,	15,	8,	0xf,	2,	false)
+	MUX_CFG(DA830, UHPI_HD_13,	15,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, UHPI_HD_14,	15,	16,	0xf,	2,	false)
+	MUX_CFG(DA830, UHPI_HD_15,	15,	20,	0xf,	2,	false)
+	MUX_CFG(DA830, LCD_D_7,		15,	24,	0xf,	2,	false)
+	MUX_CFG(DA830, MMCSD_CLK,	15,	28,	0xf,	2,	false)
+	MUX_CFG(DA830, LCD_D_10,	15,	0,	0xf,	4,	false)
+	MUX_CFG(DA830, LCD_D_11,	15,	4,	0xf,	4,	false)
+	MUX_CFG(DA830, LCD_D_12,	15,	8,	0xf,	4,	false)
+	MUX_CFG(DA830, LCD_D_13,	15,	12,	0xf,	4,	false)
+	MUX_CFG(DA830, LCD_D_14,	15,	16,	0xf,	4,	false)
+	MUX_CFG(DA830, LCD_D_15,	15,	20,	0xf,	4,	false)
+	MUX_CFG(DA830, UHPI_HCNTL0,	15,	28,	0xf,	4,	false)
+	MUX_CFG(DA830, GPIO0_10,	15,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_11,	15,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_12,	15,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_13,	15,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_14,	15,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_15,	15,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_0,		15,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_1,		15,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, EMA_A_2,		16,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_A_3,		16,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_A_4,		16,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_A_5,		16,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_A_6,		16,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_A_7,		16,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_A_8,		16,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_A_9,		16,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, MMCSD_CMD,	16,	0,	0xf,	2,	false)
+	MUX_CFG(DA830, LCD_D_6,		16,	4,	0xf,	2,	false)
+	MUX_CFG(DA830, LCD_D_3,		16,	8,	0xf,	2,	false)
+	MUX_CFG(DA830, LCD_D_2,		16,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, LCD_D_1,		16,	16,	0xf,	2,	false)
+	MUX_CFG(DA830, LCD_D_0,		16,	20,	0xf,	2,	false)
+	MUX_CFG(DA830, LCD_PCLK,	16,	24,	0xf,	2,	false)
+	MUX_CFG(DA830, LCD_HSYNC,	16,	28,	0xf,	2,	false)
+	MUX_CFG(DA830, UHPI_HCNTL1,	16,	0,	0xf,	4,	false)
+	MUX_CFG(DA830, GPIO1_2,		16,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_3,		16,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_4,		16,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_5,		16,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_6,		16,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_7,		16,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_8,		16,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_9,		16,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, EMA_A_10,	17,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_A_11,	17,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_A_12,	17,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_BA_1,	17,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_BA_0,	17,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_CLK,		17,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_SDCKE,	17,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMA_CAS,	17,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, LCD_VSYNC,	17,	0,	0xf,	2,	false)
+	MUX_CFG(DA830, NLCD_AC_ENB_CS,	17,	4,	0xf,	2,	false)
+	MUX_CFG(DA830, LCD_MCLK,	17,	8,	0xf,	2,	false)
+	MUX_CFG(DA830, LCD_D_5,		17,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, LCD_D_4,		17,	16,	0xf,	2,	false)
+	MUX_CFG(DA830, OBSCLK,		17,	20,	0xf,	2,	false)
+	MUX_CFG(DA830, NEMA_CS_4,	17,	28,	0xf,	2,	false)
+	MUX_CFG(DA830, UHPI_HHWIL,	17,	12,	0xf,	4,	false)
+	MUX_CFG(DA830, AHCLKR2,		17,	20,	0xf,	4,	false)
+	MUX_CFG(DA830, GPIO1_10,	17,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_11,	17,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_12,	17,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_13,	17,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_14,	17,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_15,	17,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_0,		17,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_1,		17,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, NEMA_RAS,	18,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMA_WE,		18,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMA_CS_0,	18,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMA_CS_2,	18,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMA_CS_3,	18,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMA_OE,		18,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMA_WE_DQM_1,	18,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMA_WE_DQM_0,	18,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMA_CS_5,	18,	0,	0xf,	2,	false)
+	MUX_CFG(DA830, UHPI_HRNW,	18,	4,	0xf,	2,	false)
+	MUX_CFG(DA830, NUHPI_HAS,	18,	8,	0xf,	2,	false)
+	MUX_CFG(DA830, NUHPI_HCS,	18,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, NUHPI_HDS1,	18,	20,	0xf,	2,	false)
+	MUX_CFG(DA830, NUHPI_HDS2,	18,	24,	0xf,	2,	false)
+	MUX_CFG(DA830, NUHPI_HINT,	18,	28,	0xf,	2,	false)
+	MUX_CFG(DA830, AXR0_12,		18,	4,	0xf,	4,	false)
+	MUX_CFG(DA830, AMUTE2,		18,	16,	0xf,	4,	false)
+	MUX_CFG(DA830, AXR0_13,		18,	20,	0xf,	4,	false)
+	MUX_CFG(DA830, AXR0_14,		18,	24,	0xf,	4,	false)
+	MUX_CFG(DA830, AXR0_15,		18,	28,	0xf,	4,	false)
+	MUX_CFG(DA830, GPIO2_2,		18,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_3,		18,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_4,		18,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_5,		18,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_6,		18,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_7,		18,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_8,		18,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_9,		18,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, EMA_WAIT_0,	19,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, NUHPI_HRDY,	19,	0,	0xf,	2,	false)
+	MUX_CFG(DA830, GPIO2_10,	19,	0,	0xf,	8,	false)
+#endif
+};
+
+const short da830_emif25_pins[] __initdata = {
+	DA830_EMA_D_0, DA830_EMA_D_1, DA830_EMA_D_2, DA830_EMA_D_3,
+	DA830_EMA_D_4, DA830_EMA_D_5, DA830_EMA_D_6, DA830_EMA_D_7,
+	DA830_EMA_D_8, DA830_EMA_D_9, DA830_EMA_D_10, DA830_EMA_D_11,
+	DA830_EMA_D_12, DA830_EMA_D_13, DA830_EMA_D_14, DA830_EMA_D_15,
+	DA830_EMA_A_0, DA830_EMA_A_1, DA830_EMA_A_2, DA830_EMA_A_3,
+	DA830_EMA_A_4, DA830_EMA_A_5, DA830_EMA_A_6, DA830_EMA_A_7,
+	DA830_EMA_A_8, DA830_EMA_A_9, DA830_EMA_A_10, DA830_EMA_A_11,
+	DA830_EMA_A_12, DA830_EMA_BA_0, DA830_EMA_BA_1, DA830_EMA_CLK,
+	DA830_EMA_SDCKE, DA830_NEMA_CS_4, DA830_NEMA_CS_5, DA830_NEMA_WE,
+	DA830_NEMA_CS_0, DA830_NEMA_CS_2, DA830_NEMA_CS_3, DA830_NEMA_OE,
+	DA830_NEMA_WE_DQM_1, DA830_NEMA_WE_DQM_0, DA830_EMA_WAIT_0,
+	-1
+};
+
+const short da830_spi0_pins[] __initdata = {
+	DA830_SPI0_SOMI_0, DA830_SPI0_SIMO_0, DA830_SPI0_CLK, DA830_NSPI0_ENA,
+	DA830_NSPI0_SCS_0,
+	-1
+};
+
+const short da830_spi1_pins[] __initdata = {
+	DA830_SPI1_SOMI_0, DA830_SPI1_SIMO_0, DA830_SPI1_CLK, DA830_NSPI1_ENA,
+	DA830_NSPI1_SCS_0,
+	-1
+};
+
+const short da830_mmc_sd_pins[] __initdata = {
+	DA830_MMCSD_DAT_0, DA830_MMCSD_DAT_1, DA830_MMCSD_DAT_2,
+	DA830_MMCSD_DAT_3, DA830_MMCSD_DAT_4, DA830_MMCSD_DAT_5,
+	DA830_MMCSD_DAT_6, DA830_MMCSD_DAT_7, DA830_MMCSD_CLK,
+	DA830_MMCSD_CMD,
+	-1
+};
+
+const short da830_uart0_pins[] __initdata = {
+	DA830_NUART0_CTS, DA830_NUART0_RTS, DA830_UART0_RXD, DA830_UART0_TXD,
+	-1
+};
+
+const short da830_uart1_pins[] __initdata = {
+	DA830_UART1_RXD, DA830_UART1_TXD,
+	-1
+};
+
+const short da830_uart2_pins[] __initdata = {
+	DA830_UART2_RXD, DA830_UART2_TXD,
+	-1
+};
+
+const short da830_usb20_pins[] __initdata = {
+	DA830_USB0_DRVVBUS, DA830_USB_REFCLKIN,
+	-1
+};
+
+const short da830_usb11_pins[] __initdata = {
+	DA830_USB_REFCLKIN,
+	-1
+};
+
+const short da830_uhpi_pins[] __initdata = {
+	DA830_UHPI_HD_0, DA830_UHPI_HD_1, DA830_UHPI_HD_2, DA830_UHPI_HD_3,
+	DA830_UHPI_HD_4, DA830_UHPI_HD_5, DA830_UHPI_HD_6, DA830_UHPI_HD_7,
+	DA830_UHPI_HD_8, DA830_UHPI_HD_9, DA830_UHPI_HD_10, DA830_UHPI_HD_11,
+	DA830_UHPI_HD_12, DA830_UHPI_HD_13, DA830_UHPI_HD_14, DA830_UHPI_HD_15,
+	DA830_UHPI_HCNTL0, DA830_UHPI_HCNTL1, DA830_UHPI_HHWIL, DA830_UHPI_HRNW,
+	DA830_NUHPI_HAS, DA830_NUHPI_HCS, DA830_NUHPI_HDS1, DA830_NUHPI_HDS2,
+	DA830_NUHPI_HINT, DA830_NUHPI_HRDY,
+	-1
+};
+
+const short da830_cpgmac_pins[] __initdata = {
+	DA830_RMII_TXD_0, DA830_RMII_TXD_1, DA830_RMII_TXEN, DA830_RMII_CRS_DV,
+	DA830_RMII_RXD_0, DA830_RMII_RXD_1, DA830_RMII_RXER, DA830_MDIO_CLK,
+	DA830_MDIO_D,
+	-1
+};
+
+const short da830_emif3c_pins[] __initdata = {
+	DA830_EMB_SDCKE, DA830_EMB_CLK_GLUE, DA830_EMB_CLK, DA830_NEMB_CS_0,
+	DA830_NEMB_CAS, DA830_NEMB_RAS, DA830_NEMB_WE, DA830_EMB_BA_1,
+	DA830_EMB_BA_0, DA830_EMB_A_0, DA830_EMB_A_1, DA830_EMB_A_2,
+	DA830_EMB_A_3, DA830_EMB_A_4, DA830_EMB_A_5, DA830_EMB_A_6,
+	DA830_EMB_A_7, DA830_EMB_A_8, DA830_EMB_A_9, DA830_EMB_A_10,
+	DA830_EMB_A_11, DA830_EMB_A_12, DA830_NEMB_WE_DQM_3,
+	DA830_NEMB_WE_DQM_2, DA830_EMB_D_0, DA830_EMB_D_1, DA830_EMB_D_2,
+	DA830_EMB_D_3, DA830_EMB_D_4, DA830_EMB_D_5, DA830_EMB_D_6,
+	DA830_EMB_D_7, DA830_EMB_D_8, DA830_EMB_D_9, DA830_EMB_D_10,
+	DA830_EMB_D_11, DA830_EMB_D_12, DA830_EMB_D_13, DA830_EMB_D_14,
+	DA830_EMB_D_15, DA830_EMB_D_16, DA830_EMB_D_17, DA830_EMB_D_18,
+	DA830_EMB_D_19, DA830_EMB_D_20, DA830_EMB_D_21, DA830_EMB_D_22,
+	DA830_EMB_D_23, DA830_EMB_D_24, DA830_EMB_D_25, DA830_EMB_D_26,
+	DA830_EMB_D_27, DA830_EMB_D_28, DA830_EMB_D_29, DA830_EMB_D_30,
+	DA830_EMB_D_31, DA830_NEMB_WE_DQM_1, DA830_NEMB_WE_DQM_0,
+	-1
+};
+
+const short da830_mcasp0_pins[] __initdata = {
+	DA830_AHCLKX0, DA830_ACLKX0, DA830_AFSX0,
+	DA830_AHCLKR0, DA830_ACLKR0, DA830_AFSR0, DA830_AMUTE0,
+	DA830_AXR0_0, DA830_AXR0_1, DA830_AXR0_2, DA830_AXR0_3,
+	DA830_AXR0_4, DA830_AXR0_5, DA830_AXR0_6, DA830_AXR0_7,
+	DA830_AXR0_8, DA830_AXR0_9, DA830_AXR0_10, DA830_AXR0_11,
+	DA830_AXR0_12, DA830_AXR0_13, DA830_AXR0_14, DA830_AXR0_15,
+	-1
+};
+
+const short da830_mcasp1_pins[] __initdata = {
+	DA830_AHCLKX1, DA830_ACLKX1, DA830_AFSX1,
+	DA830_AHCLKR1, DA830_ACLKR1, DA830_AFSR1, DA830_AMUTE1,
+	DA830_AXR1_0, DA830_AXR1_1, DA830_AXR1_2, DA830_AXR1_3,
+	DA830_AXR1_4, DA830_AXR1_5, DA830_AXR1_6, DA830_AXR1_7,
+	DA830_AXR1_8, DA830_AXR1_9, DA830_AXR1_10, DA830_AXR1_11,
+	-1
+};
+
+const short da830_mcasp2_pins[] __initdata = {
+	DA830_AHCLKX2, DA830_ACLKX2, DA830_AFSX2,
+	DA830_AHCLKR2, DA830_ACLKR2, DA830_AFSR2, DA830_AMUTE2,
+	DA830_AXR2_0, DA830_AXR2_1, DA830_AXR2_2, DA830_AXR2_3,
+	-1
+};
+
+const short da830_i2c0_pins[] __initdata = {
+	DA830_I2C0_SDA, DA830_I2C0_SCL,
+	-1
+};
+
+const short da830_i2c1_pins[] __initdata = {
+	DA830_I2C1_SCL, DA830_I2C1_SDA,
+	-1
+};
+
+const short da830_lcdcntl_pins[] __initdata = {
+	DA830_LCD_D_0, DA830_LCD_D_1, DA830_LCD_D_2, DA830_LCD_D_3,
+	DA830_LCD_D_4, DA830_LCD_D_5, DA830_LCD_D_6, DA830_LCD_D_7,
+	DA830_LCD_D_8, DA830_LCD_D_9, DA830_LCD_D_10, DA830_LCD_D_11,
+	DA830_LCD_D_12, DA830_LCD_D_13, DA830_LCD_D_14, DA830_LCD_D_15,
+	DA830_LCD_PCLK, DA830_LCD_HSYNC, DA830_LCD_VSYNC, DA830_NLCD_AC_ENB_CS,
+	DA830_LCD_MCLK,
+	-1
+};
+
+const short da830_pwm_pins[] __initdata = {
+	DA830_ECAP0_APWM0, DA830_ECAP1_APWM1, DA830_EPWM0B, DA830_EPWM0A,
+	DA830_EPWMSYNCI, DA830_EPWMSYNC0, DA830_ECAP2_APWM2, DA830_EHRPWMGLUETZ,
+	DA830_EPWM2B, DA830_EPWM2A, DA830_EPWM1B, DA830_EPWM1A,
+	-1
+};
+
+const short da830_ecap0_pins[] __initdata = {
+	DA830_ECAP0_APWM0,
+	-1
+};
+
+const short da830_ecap1_pins[] __initdata = {
+	DA830_ECAP1_APWM1,
+	-1
+};
+
+const short da830_ecap2_pins[] __initdata = {
+	DA830_ECAP2_APWM2,
+	-1
+};
+
+const short da830_eqep0_pins[] __initdata = {
+	DA830_EQEP0I, DA830_EQEP0S, DA830_EQEP0A, DA830_EQEP0B,
+	-1
+};
+
+const short da830_eqep1_pins[] __initdata = {
+	DA830_EQEP1I, DA830_EQEP1S, DA830_EQEP1A, DA830_EQEP1B,
+	-1
+};
+
+/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
+static u8 da830_default_priorities[DA830_N_CP_INTC_IRQ] = {
+	[IRQ_DA8XX_COMMTX]		= 7,
+	[IRQ_DA8XX_COMMRX]		= 7,
+	[IRQ_DA8XX_NINT]		= 7,
+	[IRQ_DA8XX_EVTOUT0]		= 7,
+	[IRQ_DA8XX_EVTOUT1]		= 7,
+	[IRQ_DA8XX_EVTOUT2]		= 7,
+	[IRQ_DA8XX_EVTOUT3]		= 7,
+	[IRQ_DA8XX_EVTOUT4]		= 7,
+	[IRQ_DA8XX_EVTOUT5]		= 7,
+	[IRQ_DA8XX_EVTOUT6]		= 7,
+	[IRQ_DA8XX_EVTOUT6]		= 7,
+	[IRQ_DA8XX_EVTOUT7]		= 7,
+	[IRQ_DA8XX_CCINT0]		= 7,
+	[IRQ_DA8XX_CCERRINT]		= 7,
+	[IRQ_DA8XX_TCERRINT0]		= 7,
+	[IRQ_DA8XX_AEMIFINT]		= 7,
+	[IRQ_DA8XX_I2CINT0]		= 7,
+	[IRQ_DA8XX_MMCSDINT0]		= 7,
+	[IRQ_DA8XX_MMCSDINT1]		= 7,
+	[IRQ_DA8XX_ALLINT0]		= 7,
+	[IRQ_DA8XX_RTC]			= 7,
+	[IRQ_DA8XX_SPINT0]		= 7,
+	[IRQ_DA8XX_TINT12_0]		= 7,
+	[IRQ_DA8XX_TINT34_0]		= 7,
+	[IRQ_DA8XX_TINT12_1]		= 7,
+	[IRQ_DA8XX_TINT34_1]		= 7,
+	[IRQ_DA8XX_UARTINT0]		= 7,
+	[IRQ_DA8XX_KEYMGRINT]		= 7,
+	[IRQ_DA8XX_SECINT]		= 7,
+	[IRQ_DA8XX_SECKEYERR]		= 7,
+	[IRQ_DA830_MPUERR]		= 7,
+	[IRQ_DA830_IOPUERR]		= 7,
+	[IRQ_DA830_BOOTCFGERR]		= 7,
+	[IRQ_DA8XX_CHIPINT0]		= 7,
+	[IRQ_DA8XX_CHIPINT1]		= 7,
+	[IRQ_DA8XX_CHIPINT2]		= 7,
+	[IRQ_DA8XX_CHIPINT3]		= 7,
+	[IRQ_DA8XX_TCERRINT1]		= 7,
+	[IRQ_DA8XX_C0_RX_THRESH_PULSE]	= 7,
+	[IRQ_DA8XX_C0_RX_PULSE]		= 7,
+	[IRQ_DA8XX_C0_TX_PULSE]		= 7,
+	[IRQ_DA8XX_C0_MISC_PULSE]	= 7,
+	[IRQ_DA8XX_C1_RX_THRESH_PULSE]	= 7,
+	[IRQ_DA8XX_C1_RX_PULSE]		= 7,
+	[IRQ_DA8XX_C1_TX_PULSE]		= 7,
+	[IRQ_DA8XX_C1_MISC_PULSE]	= 7,
+	[IRQ_DA8XX_MEMERR]		= 7,
+	[IRQ_DA8XX_GPIO0]		= 7,
+	[IRQ_DA8XX_GPIO1]		= 7,
+	[IRQ_DA8XX_GPIO2]		= 7,
+	[IRQ_DA8XX_GPIO3]		= 7,
+	[IRQ_DA8XX_GPIO4]		= 7,
+	[IRQ_DA8XX_GPIO5]		= 7,
+	[IRQ_DA8XX_GPIO6]		= 7,
+	[IRQ_DA8XX_GPIO7]		= 7,
+	[IRQ_DA8XX_GPIO8]		= 7,
+	[IRQ_DA8XX_I2CINT1]		= 7,
+	[IRQ_DA8XX_LCDINT]		= 7,
+	[IRQ_DA8XX_UARTINT1]		= 7,
+	[IRQ_DA8XX_MCASPINT]		= 7,
+	[IRQ_DA8XX_ALLINT1]		= 7,
+	[IRQ_DA8XX_SPINT1]		= 7,
+	[IRQ_DA8XX_UHPI_INT1]		= 7,
+	[IRQ_DA8XX_USB_INT]		= 7,
+	[IRQ_DA8XX_IRQN]		= 7,
+	[IRQ_DA8XX_RWAKEUP]		= 7,
+	[IRQ_DA8XX_UARTINT2]		= 7,
+	[IRQ_DA8XX_DFTSSINT]		= 7,
+	[IRQ_DA8XX_EHRPWM0]		= 7,
+	[IRQ_DA8XX_EHRPWM0TZ]		= 7,
+	[IRQ_DA8XX_EHRPWM1]		= 7,
+	[IRQ_DA8XX_EHRPWM1TZ]		= 7,
+	[IRQ_DA830_EHRPWM2]		= 7,
+	[IRQ_DA830_EHRPWM2TZ]		= 7,
+	[IRQ_DA8XX_ECAP0]		= 7,
+	[IRQ_DA8XX_ECAP1]		= 7,
+	[IRQ_DA8XX_ECAP2]		= 7,
+	[IRQ_DA830_EQEP0]		= 7,
+	[IRQ_DA830_EQEP1]		= 7,
+	[IRQ_DA830_T12CMPINT0_0]	= 7,
+	[IRQ_DA830_T12CMPINT1_0]	= 7,
+	[IRQ_DA830_T12CMPINT2_0]	= 7,
+	[IRQ_DA830_T12CMPINT3_0]	= 7,
+	[IRQ_DA830_T12CMPINT4_0]	= 7,
+	[IRQ_DA830_T12CMPINT5_0]	= 7,
+	[IRQ_DA830_T12CMPINT6_0]	= 7,
+	[IRQ_DA830_T12CMPINT7_0]	= 7,
+	[IRQ_DA830_T12CMPINT0_1]	= 7,
+	[IRQ_DA830_T12CMPINT1_1]	= 7,
+	[IRQ_DA830_T12CMPINT2_1]	= 7,
+	[IRQ_DA830_T12CMPINT3_1]	= 7,
+	[IRQ_DA830_T12CMPINT4_1]	= 7,
+	[IRQ_DA830_T12CMPINT5_1]	= 7,
+	[IRQ_DA830_T12CMPINT6_1]	= 7,
+	[IRQ_DA830_T12CMPINT7_1]	= 7,
+	[IRQ_DA8XX_ARMCLKSTOPREQ]	= 7,
+};
+
+static struct map_desc da830_io_desc[] = {
+	{
+		.virtual	= IO_VIRT,
+		.pfn		= __phys_to_pfn(IO_PHYS),
+		.length		= IO_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= DA8XX_CP_INTC_VIRT,
+		.pfn		= __phys_to_pfn(DA8XX_CP_INTC_BASE),
+		.length		= DA8XX_CP_INTC_SIZE,
+		.type		= MT_DEVICE
+	},
+};
+
+static void __iomem *da830_psc_bases[] = {
+	IO_ADDRESS(DA8XX_PSC0_BASE),
+	IO_ADDRESS(DA8XX_PSC1_BASE),
+};
+
+/* Contents of JTAG ID register used to identify exact cpu type */
+static struct davinci_id da830_ids[] = {
+	{
+		.variant	= 0x0,
+		.part_no	= 0xb7df,
+		.manufacturer	= 0x017,	/* 0x02f >> 1 */
+		.cpu_id		= DAVINCI_CPU_ID_DA830,
+		.name		= "da830/omap l137",
+	},
+};
+
+static struct davinci_timer_instance da830_timer_instance[2] = {
+	{
+		.base		= IO_ADDRESS(DA8XX_TIMER64P0_BASE),
+		.bottom_irq	= IRQ_DA8XX_TINT12_0,
+		.top_irq	= IRQ_DA8XX_TINT34_0,
+		.cmp_off	= DA830_CMP12_0,
+		.cmp_irq	= IRQ_DA830_T12CMPINT0_0,
+	},
+	{
+		.base		= IO_ADDRESS(DA8XX_TIMER64P1_BASE),
+		.bottom_irq	= IRQ_DA8XX_TINT12_1,
+		.top_irq	= IRQ_DA8XX_TINT34_1,
+		.cmp_off	= DA830_CMP12_0,
+		.cmp_irq	= IRQ_DA830_T12CMPINT0_1,
+	},
+};
+
+/*
+ * T0_BOT: Timer 0, bottom		: Used for clock_event & clocksource
+ * T0_TOP: Timer 0, top			: Used by DSP
+ * T1_BOT, T1_TOP: Timer 1, bottom & top: Used for watchdog timer
+ */
+static struct davinci_timer_info da830_timer_info = {
+	.timers		= da830_timer_instance,
+	.clockevent_id	= T0_BOT,
+	.clocksource_id	= T0_BOT,
+};
+
+static struct davinci_soc_info davinci_soc_info_da830 = {
+	.io_desc		= da830_io_desc,
+	.io_desc_num		= ARRAY_SIZE(da830_io_desc),
+	.jtag_id_base		= IO_ADDRESS(DA8XX_JTAG_ID_REG),
+	.ids			= da830_ids,
+	.ids_num		= ARRAY_SIZE(da830_ids),
+	.cpu_clks		= da830_clks,
+	.psc_bases		= da830_psc_bases,
+	.psc_bases_num		= ARRAY_SIZE(da830_psc_bases),
+	.pinmux_base		= IO_ADDRESS(DA8XX_BOOT_CFG_BASE + 0x120),
+	.pinmux_pins		= da830_pins,
+	.pinmux_pins_num	= ARRAY_SIZE(da830_pins),
+	.intc_base		= (void __iomem *)DA8XX_CP_INTC_VIRT,
+	.intc_type		= DAVINCI_INTC_TYPE_CP_INTC,
+	.intc_irq_prios		= da830_default_priorities,
+	.intc_irq_num		= DA830_N_CP_INTC_IRQ,
+	.timer_info		= &da830_timer_info,
+	.gpio_base		= IO_ADDRESS(DA8XX_GPIO_BASE),
+	.gpio_num		= 128,
+	.gpio_irq		= IRQ_DA8XX_GPIO0,
+	.serial_dev		= &da8xx_serial_device,
+	.emac_pdata		= &da8xx_emac_pdata,
+};
+
+void __init da830_init(void)
+{
+	davinci_common_init(&davinci_soc_info_da830);
+}

arch/arm/mach-davinci/da850.c

@@ -0,0 +1,820 @@
+/*
+ * TI DA850/OMAP-L138 chip specific setup
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Derived from: arch/arm/mach-davinci/da830.c
+ * Original Copyrights follow:
+ *
+ * 2009 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/clock.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
+#include <mach/irqs.h>
+#include <mach/cputype.h>
+#include <mach/common.h>
+#include <mach/time.h>
+#include <mach/da8xx.h>
+
+#include "clock.h"
+#include "mux.h"
+
+#define DA850_PLL1_BASE		0x01e1a000
+#define DA850_TIMER64P2_BASE	0x01f0c000
+#define DA850_TIMER64P3_BASE	0x01f0d000
+
+#define DA850_REF_FREQ		24000000
+
+static struct pll_data pll0_data = {
+	.num		= 1,
+	.phys_base	= DA8XX_PLL0_BASE,
+	.flags		= PLL_HAS_PREDIV | PLL_HAS_POSTDIV,
+};
+
+static struct clk ref_clk = {
+	.name		= "ref_clk",
+	.rate		= DA850_REF_FREQ,
+};
+
+static struct clk pll0_clk = {
+	.name		= "pll0",
+	.parent		= &ref_clk,
+	.pll_data	= &pll0_data,
+	.flags		= CLK_PLL,
+};
+
+static struct clk pll0_aux_clk = {
+	.name		= "pll0_aux_clk",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL | PRE_PLL,
+};
+
+static struct clk pll0_sysclk2 = {
+	.name		= "pll0_sysclk2",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV2,
+};
+
+static struct clk pll0_sysclk3 = {
+	.name		= "pll0_sysclk3",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV3,
+};
+
+static struct clk pll0_sysclk4 = {
+	.name		= "pll0_sysclk4",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV4,
+};
+
+static struct clk pll0_sysclk5 = {
+	.name		= "pll0_sysclk5",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV5,
+};
+
+static struct clk pll0_sysclk6 = {
+	.name		= "pll0_sysclk6",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV6,
+};
+
+static struct clk pll0_sysclk7 = {
+	.name		= "pll0_sysclk7",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV7,
+};
+
+static struct pll_data pll1_data = {
+	.num		= 2,
+	.phys_base	= DA850_PLL1_BASE,
+	.flags		= PLL_HAS_POSTDIV,
+};
+
+static struct clk pll1_clk = {
+	.name		= "pll1",
+	.parent		= &ref_clk,
+	.pll_data	= &pll1_data,
+	.flags		= CLK_PLL,
+};
+
+static struct clk pll1_aux_clk = {
+	.name		= "pll1_aux_clk",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL | PRE_PLL,
+};
+
+static struct clk pll1_sysclk2 = {
+	.name		= "pll1_sysclk2",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV2,
+};
+
+static struct clk pll1_sysclk3 = {
+	.name		= "pll1_sysclk3",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV3,
+};
+
+static struct clk pll1_sysclk4 = {
+	.name		= "pll1_sysclk4",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV4,
+};
+
+static struct clk pll1_sysclk5 = {
+	.name		= "pll1_sysclk5",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV5,
+};
+
+static struct clk pll1_sysclk6 = {
+	.name		= "pll0_sysclk6",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV6,
+};
+
+static struct clk pll1_sysclk7 = {
+	.name		= "pll1_sysclk7",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV7,
+};
+
+static struct clk i2c0_clk = {
+	.name		= "i2c0",
+	.parent		= &pll0_aux_clk,
+};
+
+static struct clk timerp64_0_clk = {
+	.name		= "timer0",
+	.parent		= &pll0_aux_clk,
+};
+
+static struct clk timerp64_1_clk = {
+	.name		= "timer1",
+	.parent		= &pll0_aux_clk,
+};
+
+static struct clk arm_rom_clk = {
+	.name		= "arm_rom",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_ARM_RAM_ROM,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk tpcc0_clk = {
+	.name		= "tpcc0",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_TPCC,
+	.flags		= ALWAYS_ENABLED | CLK_PSC,
+};
+
+static struct clk tptc0_clk = {
+	.name		= "tptc0",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_TPTC0,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk tptc1_clk = {
+	.name		= "tptc1",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_TPTC1,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk tpcc1_clk = {
+	.name		= "tpcc1",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA850_LPSC1_TPCC1,
+	.flags		= CLK_PSC | ALWAYS_ENABLED,
+	.psc_ctlr	= 1,
+};
+
+static struct clk tptc2_clk = {
+	.name		= "tptc2",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA850_LPSC1_TPTC2,
+	.flags		= ALWAYS_ENABLED,
+	.psc_ctlr	= 1,
+};
+
+static struct clk uart0_clk = {
+	.name		= "uart0",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_UART0,
+};
+
+static struct clk uart1_clk = {
+	.name		= "uart1",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_UART1,
+	.psc_ctlr	= 1,
+};
+
+static struct clk uart2_clk = {
+	.name		= "uart2",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_UART2,
+	.psc_ctlr	= 1,
+};
+
+static struct clk aintc_clk = {
+	.name		= "aintc",
+	.parent		= &pll0_sysclk4,
+	.lpsc		= DA8XX_LPSC0_AINTC,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk gpio_clk = {
+	.name		= "gpio",
+	.parent		= &pll0_sysclk4,
+	.lpsc		= DA8XX_LPSC1_GPIO,
+	.psc_ctlr	= 1,
+};
+
+static struct clk i2c1_clk = {
+	.name		= "i2c1",
+	.parent		= &pll0_sysclk4,
+	.lpsc		= DA8XX_LPSC1_I2C,
+	.psc_ctlr	= 1,
+};
+
+static struct clk emif3_clk = {
+	.name		= "emif3",
+	.parent		= &pll0_sysclk5,
+	.lpsc		= DA8XX_LPSC1_EMIF3C,
+	.flags		= ALWAYS_ENABLED,
+	.psc_ctlr	= 1,
+};
+
+static struct clk arm_clk = {
+	.name		= "arm",
+	.parent		= &pll0_sysclk6,
+	.lpsc		= DA8XX_LPSC0_ARM,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk rmii_clk = {
+	.name		= "rmii",
+	.parent		= &pll0_sysclk7,
+};
+
+static struct clk emac_clk = {
+	.name		= "emac",
+	.parent		= &pll0_sysclk4,
+	.lpsc		= DA8XX_LPSC1_CPGMAC,
+	.psc_ctlr	= 1,
+};
+
+static struct clk mcasp_clk = {
+	.name		= "mcasp",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_McASP0,
+	.psc_ctlr	= 1,
+};
+
+static struct clk lcdc_clk = {
+	.name		= "lcdc",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_LCDC,
+	.psc_ctlr	= 1,
+};
+
+static struct clk mmcsd_clk = {
+	.name		= "mmcsd",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_MMC_SD,
+};
+
+static struct clk aemif_clk = {
+	.name		= "aemif",
+	.parent		= &pll0_sysclk3,
+	.lpsc		= DA8XX_LPSC0_EMIF25,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct davinci_clk da850_clks[] = {
+	CLK(NULL,		"ref",		&ref_clk),
+	CLK(NULL,		"pll0",		&pll0_clk),
+	CLK(NULL,		"pll0_aux",	&pll0_aux_clk),
+	CLK(NULL,		"pll0_sysclk2",	&pll0_sysclk2),
+	CLK(NULL,		"pll0_sysclk3",	&pll0_sysclk3),
+	CLK(NULL,		"pll0_sysclk4",	&pll0_sysclk4),
+	CLK(NULL,		"pll0_sysclk5",	&pll0_sysclk5),
+	CLK(NULL,		"pll0_sysclk6",	&pll0_sysclk6),
+	CLK(NULL,		"pll0_sysclk7",	&pll0_sysclk7),
+	CLK(NULL,		"pll1",		&pll1_clk),
+	CLK(NULL,		"pll1_aux",	&pll1_aux_clk),
+	CLK(NULL,		"pll1_sysclk2",	&pll1_sysclk2),
+	CLK(NULL,		"pll1_sysclk3",	&pll1_sysclk3),
+	CLK(NULL,		"pll1_sysclk4",	&pll1_sysclk4),
+	CLK(NULL,		"pll1_sysclk5",	&pll1_sysclk5),
+	CLK(NULL,		"pll1_sysclk6",	&pll1_sysclk6),
+	CLK(NULL,		"pll1_sysclk7",	&pll1_sysclk7),
+	CLK("i2c_davinci.1",	NULL,		&i2c0_clk),
+	CLK(NULL,		"timer0",	&timerp64_0_clk),
+	CLK("watchdog",		NULL,		&timerp64_1_clk),
+	CLK(NULL,		"arm_rom",	&arm_rom_clk),
+	CLK(NULL,		"tpcc0",	&tpcc0_clk),
+	CLK(NULL,		"tptc0",	&tptc0_clk),
+	CLK(NULL,		"tptc1",	&tptc1_clk),
+	CLK(NULL,		"tpcc1",	&tpcc1_clk),
+	CLK(NULL,		"tptc2",	&tptc2_clk),
+	CLK(NULL,		"uart0",	&uart0_clk),
+	CLK(NULL,		"uart1",	&uart1_clk),
+	CLK(NULL,		"uart2",	&uart2_clk),
+	CLK(NULL,		"aintc",	&aintc_clk),
+	CLK(NULL,		"gpio",		&gpio_clk),
+	CLK("i2c_davinci.2",	NULL,		&i2c1_clk),
+	CLK(NULL,		"emif3",	&emif3_clk),
+	CLK(NULL,		"arm",		&arm_clk),
+	CLK(NULL,		"rmii",		&rmii_clk),
+	CLK("davinci_emac.1",	NULL,		&emac_clk),
+	CLK("davinci-mcasp.0",	NULL,		&mcasp_clk),
+	CLK("da8xx_lcdc.0",	NULL,		&lcdc_clk),
+	CLK("davinci_mmc.0",	NULL,		&mmcsd_clk),
+	CLK(NULL,		"aemif",	&aemif_clk),
+	CLK(NULL,		NULL,		NULL),
+};
+
+/*
+ * Device specific mux setup
+ *
+ *		soc	description	mux	mode	mode	mux	dbg
+ *					reg	offset	mask	mode
+ */
+static const struct mux_config da850_pins[] = {
+#ifdef CONFIG_DAVINCI_MUX
+	/* UART0 function */
+	MUX_CFG(DA850, NUART0_CTS,	3,	24,	15,	2,	false)
+	MUX_CFG(DA850, NUART0_RTS,	3,	28,	15,	2,	false)
+	MUX_CFG(DA850, UART0_RXD,	3,	16,	15,	2,	false)
+	MUX_CFG(DA850, UART0_TXD,	3,	20,	15,	2,	false)
+	/* UART1 function */
+	MUX_CFG(DA850, UART1_RXD,	4,	24,	15,	2,	false)
+	MUX_CFG(DA850, UART1_TXD,	4,	28,	15,	2,	false)
+	/* UART2 function */
+	MUX_CFG(DA850, UART2_RXD,	4,	16,	15,	2,	false)
+	MUX_CFG(DA850, UART2_TXD,	4,	20,	15,	2,	false)
+	/* I2C1 function */
+	MUX_CFG(DA850, I2C1_SCL,	4,	16,	15,	4,	false)
+	MUX_CFG(DA850, I2C1_SDA,	4,	20,	15,	4,	false)
+	/* I2C0 function */
+	MUX_CFG(DA850, I2C0_SDA,	4,	12,	15,	2,	false)
+	MUX_CFG(DA850, I2C0_SCL,	4,	8,	15,	2,	false)
+	/* EMAC function */
+	MUX_CFG(DA850, MII_TXEN,	2,	4,	15,	8,	false)
+	MUX_CFG(DA850, MII_TXCLK,	2,	8,	15,	8,	false)
+	MUX_CFG(DA850, MII_COL,		2,	12,	15,	8,	false)
+	MUX_CFG(DA850, MII_TXD_3,	2,	16,	15,	8,	false)
+	MUX_CFG(DA850, MII_TXD_2,	2,	20,	15,	8,	false)
+	MUX_CFG(DA850, MII_TXD_1,	2,	24,	15,	8,	false)
+	MUX_CFG(DA850, MII_TXD_0,	2,	28,	15,	8,	false)
+	MUX_CFG(DA850, MII_RXCLK,	3,	0,	15,	8,	false)
+	MUX_CFG(DA850, MII_RXDV,	3,	4,	15,	8,	false)
+	MUX_CFG(DA850, MII_RXER,	3,	8,	15,	8,	false)
+	MUX_CFG(DA850, MII_CRS,		3,	12,	15,	8,	false)
+	MUX_CFG(DA850, MII_RXD_3,	3,	16,	15,	8,	false)
+	MUX_CFG(DA850, MII_RXD_2,	3,	20,	15,	8,	false)
+	MUX_CFG(DA850, MII_RXD_1,	3,	24,	15,	8,	false)
+	MUX_CFG(DA850, MII_RXD_0,	3,	28,	15,	8,	false)
+	MUX_CFG(DA850, MDIO_CLK,	4,	0,	15,	8,	false)
+	MUX_CFG(DA850, MDIO_D,		4,	4,	15,	8,	false)
+	/* McASP function */
+	MUX_CFG(DA850,	ACLKR,		0,	0,	15,	1,	false)
+	MUX_CFG(DA850,	ACLKX,		0,	4,	15,	1,	false)
+	MUX_CFG(DA850,	AFSR,		0,	8,	15,	1,	false)
+	MUX_CFG(DA850,	AFSX,		0,	12,	15,	1,	false)
+	MUX_CFG(DA850,	AHCLKR,		0,	16,	15,	1,	false)
+	MUX_CFG(DA850,	AHCLKX,		0,	20,	15,	1,	false)
+	MUX_CFG(DA850,	AMUTE,		0,	24,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_15,		1,	0,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_14,		1,	4,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_13,		1,	8,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_12,		1,	12,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_11,		1,	16,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_10,		1,	20,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_9,		1,	24,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_8,		1,	28,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_7,		2,	0,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_6,		2,	4,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_5,		2,	8,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_4,		2,	12,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_3,		2,	16,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_2,		2,	20,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_1,		2,	24,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_0,		2,	28,	15,	1,	false)
+	/* LCD function */
+	MUX_CFG(DA850, LCD_D_7,		16,	8,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_6,		16,	12,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_5,		16,	16,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_4,		16,	20,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_3,		16,	24,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_2,		16,	28,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_1,		17,	0,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_0,		17,	4,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_15,	17,	8,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_14,	17,	12,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_13,	17,	16,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_12,	17,	20,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_11,	17,	24,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_10,	17,	28,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_9,		18,	0,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_8,		18,	4,	15,	2,	false)
+	MUX_CFG(DA850, LCD_PCLK,	18,	24,	15,	2,	false)
+	MUX_CFG(DA850, LCD_HSYNC,	19,	0,	15,	2,	false)
+	MUX_CFG(DA850, LCD_VSYNC,	19,	4,	15,	2,	false)
+	MUX_CFG(DA850, NLCD_AC_ENB_CS,	19,	24,	15,	2,	false)
+	/* MMC/SD0 function */
+	MUX_CFG(DA850, MMCSD0_DAT_0,	10,	8,	15,	2,	false)
+	MUX_CFG(DA850, MMCSD0_DAT_1,	10,	12,	15,	2,	false)
+	MUX_CFG(DA850, MMCSD0_DAT_2,	10,	16,	15,	2,	false)
+	MUX_CFG(DA850, MMCSD0_DAT_3,	10,	20,	15,	2,	false)
+	MUX_CFG(DA850, MMCSD0_CLK,	10,	0,	15,	2,	false)
+	MUX_CFG(DA850, MMCSD0_CMD,	10,	4,	15,	2,	false)
+	/* EMIF2.5/EMIFA function */
+	MUX_CFG(DA850, EMA_D_7,		9,	0,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_6,		9,	4,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_5,		9,	8,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_4,		9,	12,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_3,		9,	16,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_2,		9,	20,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_1,		9,	24,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_0,		9,	28,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_1,		12,	24,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_2,		12,	20,	15,	1,	false)
+	MUX_CFG(DA850, NEMA_CS_3,	7,	4,	15,	1,	false)
+	MUX_CFG(DA850, NEMA_CS_4,	7,	8,	15,	1,	false)
+	MUX_CFG(DA850, NEMA_WE,		7,	16,	15,	1,	false)
+	MUX_CFG(DA850, NEMA_OE,		7,	20,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_0,		12,	28,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_3,		12,	16,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_4,		12,	12,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_5,		12,	8,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_6,		12,	4,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_7,		12,	0,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_8,		11,	28,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_9,		11,	24,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_10,	11,	20,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_11,	11,	16,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_12,	11,	12,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_13,	11,	8,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_14,	11,	4,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_15,	11,	0,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_16,	10,	28,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_17,	10,	24,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_18,	10,	20,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_19,	10,	16,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_20,	10,	12,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_21,	10,	8,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_22,	10,	4,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_23,	10,	0,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_8,		8,	28,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_9,		8,	24,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_10,	8,	20,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_11,	8,	16,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_12,	8,	12,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_13,	8,	8,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_14,	8,	4,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_15,	8,	0,	15,	1,	false)
+	MUX_CFG(DA850, EMA_BA_1,	5,	24,	15,	1,	false)
+	MUX_CFG(DA850, EMA_CLK,		6,	0,	15,	1,	false)
+	MUX_CFG(DA850, EMA_WAIT_1,	6,	24,	15,	1,	false)
+	MUX_CFG(DA850, NEMA_CS_2,	7,	0,	15,	1,	false)
+	/* GPIO function */
+	MUX_CFG(DA850, GPIO2_15,	5,	0,	15,	8,	false)
+	MUX_CFG(DA850, GPIO8_10,	18,	28,	15,	8,	false)
+	MUX_CFG(DA850, GPIO4_0,		10,	28,	15,	8,	false)
+	MUX_CFG(DA850, GPIO4_1,		10,	24,	15,	8,	false)
+#endif
+};
+
+const short da850_uart0_pins[] __initdata = {
+	DA850_NUART0_CTS, DA850_NUART0_RTS, DA850_UART0_RXD, DA850_UART0_TXD,
+	-1
+};
+
+const short da850_uart1_pins[] __initdata = {
+	DA850_UART1_RXD, DA850_UART1_TXD,
+	-1
+};
+
+const short da850_uart2_pins[] __initdata = {
+	DA850_UART2_RXD, DA850_UART2_TXD,
+	-1
+};
+
+const short da850_i2c0_pins[] __initdata = {
+	DA850_I2C0_SDA, DA850_I2C0_SCL,
+	-1
+};
+
+const short da850_i2c1_pins[] __initdata = {
+	DA850_I2C1_SCL, DA850_I2C1_SDA,
+	-1
+};
+
+const short da850_cpgmac_pins[] __initdata = {
+	DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3,
+	DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER,
+	DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3,
+	DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, DA850_MDIO_CLK,
+	DA850_MDIO_D,
+	-1
+};
+
+const short da850_mcasp_pins[] __initdata = {
+	DA850_AHCLKX, DA850_ACLKX, DA850_AFSX,
+	DA850_AHCLKR, DA850_ACLKR, DA850_AFSR, DA850_AMUTE,
+	DA850_AXR_11, DA850_AXR_12,
+	-1
+};
+
+const short da850_lcdcntl_pins[] __initdata = {
+	DA850_LCD_D_1, DA850_LCD_D_2, DA850_LCD_D_3, DA850_LCD_D_4,
+	DA850_LCD_D_5, DA850_LCD_D_6, DA850_LCD_D_7, DA850_LCD_D_8,
+	DA850_LCD_D_9, DA850_LCD_D_10, DA850_LCD_D_11, DA850_LCD_D_12,
+	DA850_LCD_D_13, DA850_LCD_D_14, DA850_LCD_D_15, DA850_LCD_PCLK,
+	DA850_LCD_HSYNC, DA850_LCD_VSYNC, DA850_NLCD_AC_ENB_CS, DA850_GPIO2_15,
+	DA850_GPIO8_10,
+	-1
+};
+
+const short da850_mmcsd0_pins[] __initdata = {
+	DA850_MMCSD0_DAT_0, DA850_MMCSD0_DAT_1, DA850_MMCSD0_DAT_2,
+	DA850_MMCSD0_DAT_3, DA850_MMCSD0_CLK, DA850_MMCSD0_CMD,
+	DA850_GPIO4_0, DA850_GPIO4_1,
+	-1
+};
+
+const short da850_nand_pins[] __initdata = {
+	DA850_EMA_D_7, DA850_EMA_D_6, DA850_EMA_D_5, DA850_EMA_D_4,
+	DA850_EMA_D_3, DA850_EMA_D_2, DA850_EMA_D_1, DA850_EMA_D_0,
+	DA850_EMA_A_1, DA850_EMA_A_2, DA850_NEMA_CS_3, DA850_NEMA_CS_4,
+	DA850_NEMA_WE, DA850_NEMA_OE,
+	-1
+};
+
+const short da850_nor_pins[] __initdata = {
+	DA850_EMA_BA_1, DA850_EMA_CLK, DA850_EMA_WAIT_1, DA850_NEMA_CS_2,
+	DA850_NEMA_WE, DA850_NEMA_OE, DA850_EMA_D_0, DA850_EMA_D_1,
+	DA850_EMA_D_2, DA850_EMA_D_3, DA850_EMA_D_4, DA850_EMA_D_5,
+	DA850_EMA_D_6, DA850_EMA_D_7, DA850_EMA_D_8, DA850_EMA_D_9,
+	DA850_EMA_D_10, DA850_EMA_D_11, DA850_EMA_D_12, DA850_EMA_D_13,
+	DA850_EMA_D_14, DA850_EMA_D_15, DA850_EMA_A_0, DA850_EMA_A_1,
+	DA850_EMA_A_2, DA850_EMA_A_3, DA850_EMA_A_4, DA850_EMA_A_5,
+	DA850_EMA_A_6, DA850_EMA_A_7, DA850_EMA_A_8, DA850_EMA_A_9,
+	DA850_EMA_A_10, DA850_EMA_A_11, DA850_EMA_A_12, DA850_EMA_A_13,
+	DA850_EMA_A_14, DA850_EMA_A_15, DA850_EMA_A_16, DA850_EMA_A_17,
+	DA850_EMA_A_18, DA850_EMA_A_19, DA850_EMA_A_20, DA850_EMA_A_21,
+	DA850_EMA_A_22, DA850_EMA_A_23,
+	-1
+};
+
+/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
+static u8 da850_default_priorities[DA850_N_CP_INTC_IRQ] = {
+	[IRQ_DA8XX_COMMTX]		= 7,
+	[IRQ_DA8XX_COMMRX]		= 7,
+	[IRQ_DA8XX_NINT]		= 7,
+	[IRQ_DA8XX_EVTOUT0]		= 7,
+	[IRQ_DA8XX_EVTOUT1]		= 7,
+	[IRQ_DA8XX_EVTOUT2]		= 7,
+	[IRQ_DA8XX_EVTOUT3]		= 7,
+	[IRQ_DA8XX_EVTOUT4]		= 7,
+	[IRQ_DA8XX_EVTOUT5]		= 7,
+	[IRQ_DA8XX_EVTOUT6]		= 7,
+	[IRQ_DA8XX_EVTOUT6]		= 7,
+	[IRQ_DA8XX_EVTOUT7]		= 7,
+	[IRQ_DA8XX_CCINT0]		= 7,
+	[IRQ_DA8XX_CCERRINT]		= 7,
+	[IRQ_DA8XX_TCERRINT0]		= 7,
+	[IRQ_DA8XX_AEMIFINT]		= 7,
+	[IRQ_DA8XX_I2CINT0]		= 7,
+	[IRQ_DA8XX_MMCSDINT0]		= 7,
+	[IRQ_DA8XX_MMCSDINT1]		= 7,
+	[IRQ_DA8XX_ALLINT0]		= 7,
+	[IRQ_DA8XX_RTC]			= 7,
+	[IRQ_DA8XX_SPINT0]		= 7,
+	[IRQ_DA8XX_TINT12_0]		= 7,
+	[IRQ_DA8XX_TINT34_0]		= 7,
+	[IRQ_DA8XX_TINT12_1]		= 7,
+	[IRQ_DA8XX_TINT34_1]		= 7,
+	[IRQ_DA8XX_UARTINT0]		= 7,
+	[IRQ_DA8XX_KEYMGRINT]		= 7,
+	[IRQ_DA8XX_SECINT]		= 7,
+	[IRQ_DA8XX_SECKEYERR]		= 7,
+	[IRQ_DA850_MPUADDRERR0]		= 7,
+	[IRQ_DA850_MPUPROTERR0]		= 7,
+	[IRQ_DA850_IOPUADDRERR0]	= 7,
+	[IRQ_DA850_IOPUPROTERR0]	= 7,
+	[IRQ_DA850_IOPUADDRERR1]	= 7,
+	[IRQ_DA850_IOPUPROTERR1]	= 7,
+	[IRQ_DA850_IOPUADDRERR2]	= 7,
+	[IRQ_DA850_IOPUPROTERR2]	= 7,
+	[IRQ_DA850_BOOTCFG_ADDR_ERR]	= 7,
+	[IRQ_DA850_BOOTCFG_PROT_ERR]	= 7,
+	[IRQ_DA850_MPUADDRERR1]		= 7,
+	[IRQ_DA850_MPUPROTERR1]		= 7,
+	[IRQ_DA850_IOPUADDRERR3]	= 7,
+	[IRQ_DA850_IOPUPROTERR3]	= 7,
+	[IRQ_DA850_IOPUADDRERR4]	= 7,
+	[IRQ_DA850_IOPUPROTERR4]	= 7,
+	[IRQ_DA850_IOPUADDRERR5]	= 7,
+	[IRQ_DA850_IOPUPROTERR5]	= 7,
+	[IRQ_DA850_MIOPU_BOOTCFG_ERR]	= 7,
+	[IRQ_DA8XX_CHIPINT0]		= 7,
+	[IRQ_DA8XX_CHIPINT1]		= 7,
+	[IRQ_DA8XX_CHIPINT2]		= 7,
+	[IRQ_DA8XX_CHIPINT3]		= 7,
+	[IRQ_DA8XX_TCERRINT1]		= 7,
+	[IRQ_DA8XX_C0_RX_THRESH_PULSE]	= 7,
+	[IRQ_DA8XX_C0_RX_PULSE]		= 7,
+	[IRQ_DA8XX_C0_TX_PULSE]		= 7,
+	[IRQ_DA8XX_C0_MISC_PULSE]	= 7,
+	[IRQ_DA8XX_C1_RX_THRESH_PULSE]	= 7,
+	[IRQ_DA8XX_C1_RX_PULSE]		= 7,
+	[IRQ_DA8XX_C1_TX_PULSE]		= 7,
+	[IRQ_DA8XX_C1_MISC_PULSE]	= 7,
+	[IRQ_DA8XX_MEMERR]		= 7,
+	[IRQ_DA8XX_GPIO0]		= 7,
+	[IRQ_DA8XX_GPIO1]		= 7,
+	[IRQ_DA8XX_GPIO2]		= 7,
+	[IRQ_DA8XX_GPIO3]		= 7,
+	[IRQ_DA8XX_GPIO4]		= 7,
+	[IRQ_DA8XX_GPIO5]		= 7,
+	[IRQ_DA8XX_GPIO6]		= 7,
+	[IRQ_DA8XX_GPIO7]		= 7,
+	[IRQ_DA8XX_GPIO8]		= 7,
+	[IRQ_DA8XX_I2CINT1]		= 7,
+	[IRQ_DA8XX_LCDINT]		= 7,
+	[IRQ_DA8XX_UARTINT1]		= 7,
+	[IRQ_DA8XX_MCASPINT]		= 7,
+	[IRQ_DA8XX_ALLINT1]		= 7,
+	[IRQ_DA8XX_SPINT1]		= 7,
+	[IRQ_DA8XX_UHPI_INT1]		= 7,
+	[IRQ_DA8XX_USB_INT]		= 7,
+	[IRQ_DA8XX_IRQN]		= 7,
+	[IRQ_DA8XX_RWAKEUP]		= 7,
+	[IRQ_DA8XX_UARTINT2]		= 7,
+	[IRQ_DA8XX_DFTSSINT]		= 7,
+	[IRQ_DA8XX_EHRPWM0]		= 7,
+	[IRQ_DA8XX_EHRPWM0TZ]		= 7,
+	[IRQ_DA8XX_EHRPWM1]		= 7,
+	[IRQ_DA8XX_EHRPWM1TZ]		= 7,
+	[IRQ_DA850_SATAINT]		= 7,
+	[IRQ_DA850_TINT12_2]		= 7,
+	[IRQ_DA850_TINT34_2]		= 7,
+	[IRQ_DA850_TINTALL_2]		= 7,
+	[IRQ_DA8XX_ECAP0]		= 7,
+	[IRQ_DA8XX_ECAP1]		= 7,
+	[IRQ_DA8XX_ECAP2]		= 7,
+	[IRQ_DA850_MMCSDINT0_1]		= 7,
+	[IRQ_DA850_MMCSDINT1_1]		= 7,
+	[IRQ_DA850_T12CMPINT0_2]	= 7,
+	[IRQ_DA850_T12CMPINT1_2]	= 7,
+	[IRQ_DA850_T12CMPINT2_2]	= 7,
+	[IRQ_DA850_T12CMPINT3_2]	= 7,
+	[IRQ_DA850_T12CMPINT4_2]	= 7,
+	[IRQ_DA850_T12CMPINT5_2]	= 7,
+	[IRQ_DA850_T12CMPINT6_2]	= 7,
+	[IRQ_DA850_T12CMPINT7_2]	= 7,
+	[IRQ_DA850_T12CMPINT0_3]	= 7,
+	[IRQ_DA850_T12CMPINT1_3]	= 7,
+	[IRQ_DA850_T12CMPINT2_3]	= 7,
+	[IRQ_DA850_T12CMPINT3_3]	= 7,
+	[IRQ_DA850_T12CMPINT4_3]	= 7,
+	[IRQ_DA850_T12CMPINT5_3]	= 7,
+	[IRQ_DA850_T12CMPINT6_3]	= 7,
+	[IRQ_DA850_T12CMPINT7_3]	= 7,
+	[IRQ_DA850_RPIINT]		= 7,
+	[IRQ_DA850_VPIFINT]		= 7,
+	[IRQ_DA850_CCINT1]		= 7,
+	[IRQ_DA850_CCERRINT1]		= 7,
+	[IRQ_DA850_TCERRINT2]		= 7,
+	[IRQ_DA850_TINT12_3]		= 7,
+	[IRQ_DA850_TINT34_3]		= 7,
+	[IRQ_DA850_TINTALL_3]		= 7,
+	[IRQ_DA850_MCBSP0RINT]		= 7,
+	[IRQ_DA850_MCBSP0XINT]		= 7,
+	[IRQ_DA850_MCBSP1RINT]		= 7,
+	[IRQ_DA850_MCBSP1XINT]		= 7,
+	[IRQ_DA8XX_ARMCLKSTOPREQ]	= 7,
+};
+
+static struct map_desc da850_io_desc[] = {
+	{
+		.virtual	= IO_VIRT,
+		.pfn		= __phys_to_pfn(IO_PHYS),
+		.length		= IO_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= DA8XX_CP_INTC_VIRT,
+		.pfn		= __phys_to_pfn(DA8XX_CP_INTC_BASE),
+		.length		= DA8XX_CP_INTC_SIZE,
+		.type		= MT_DEVICE
+	},
+};
+
+static void __iomem *da850_psc_bases[] = {
+	IO_ADDRESS(DA8XX_PSC0_BASE),
+	IO_ADDRESS(DA8XX_PSC1_BASE),
+};
+
+/* Contents of JTAG ID register used to identify exact cpu type */
+static struct davinci_id da850_ids[] = {
+	{
+		.variant	= 0x0,
+		.part_no	= 0xb7d1,
+		.manufacturer	= 0x017,	/* 0x02f >> 1 */
+		.cpu_id		= DAVINCI_CPU_ID_DA850,
+		.name		= "da850/omap-l138",
+	},
+};
+
+static struct davinci_timer_instance da850_timer_instance[4] = {
+	{
+		.base		= IO_ADDRESS(DA8XX_TIMER64P0_BASE),
+		.bottom_irq	= IRQ_DA8XX_TINT12_0,
+		.top_irq	= IRQ_DA8XX_TINT34_0,
+	},
+	{
+		.base		= IO_ADDRESS(DA8XX_TIMER64P1_BASE),
+		.bottom_irq	= IRQ_DA8XX_TINT12_1,
+		.top_irq	= IRQ_DA8XX_TINT34_1,
+	},
+	{
+		.base		= IO_ADDRESS(DA850_TIMER64P2_BASE),
+		.bottom_irq	= IRQ_DA850_TINT12_2,
+		.top_irq	= IRQ_DA850_TINT34_2,
+	},
+	{
+		.base		= IO_ADDRESS(DA850_TIMER64P3_BASE),
+		.bottom_irq	= IRQ_DA850_TINT12_3,
+		.top_irq	= IRQ_DA850_TINT34_3,
+	},
+};
+
+/*
+ * T0_BOT: Timer 0, bottom		: Used for clock_event
+ * T0_TOP: Timer 0, top			: Used for clocksource
+ * T1_BOT, T1_TOP: Timer 1, bottom & top: Used for watchdog timer
+ */
+static struct davinci_timer_info da850_timer_info = {
+	.timers		= da850_timer_instance,
+	.clockevent_id	= T0_BOT,
+	.clocksource_id	= T0_TOP,
+};
+
+static struct davinci_soc_info davinci_soc_info_da850 = {
+	.io_desc		= da850_io_desc,
+	.io_desc_num		= ARRAY_SIZE(da850_io_desc),
+	.jtag_id_base		= IO_ADDRESS(DA8XX_JTAG_ID_REG),
+	.ids			= da850_ids,
+	.ids_num		= ARRAY_SIZE(da850_ids),
+	.cpu_clks		= da850_clks,
+	.psc_bases		= da850_psc_bases,
+	.psc_bases_num		= ARRAY_SIZE(da850_psc_bases),
+	.pinmux_base		= IO_ADDRESS(DA8XX_BOOT_CFG_BASE + 0x120),
+	.pinmux_pins		= da850_pins,
+	.pinmux_pins_num	= ARRAY_SIZE(da850_pins),
+	.intc_base		= (void __iomem *)DA8XX_CP_INTC_VIRT,
+	.intc_type		= DAVINCI_INTC_TYPE_CP_INTC,
+	.intc_irq_prios		= da850_default_priorities,
+	.intc_irq_num		= DA850_N_CP_INTC_IRQ,
+	.timer_info		= &da850_timer_info,
+	.gpio_base		= IO_ADDRESS(DA8XX_GPIO_BASE),
+	.gpio_num		= 144,
+	.gpio_irq		= IRQ_DA8XX_GPIO0,
+	.serial_dev		= &da8xx_serial_device,
+	.emac_pdata		= &da8xx_emac_pdata,
+};
+
+void __init da850_init(void)
+{
+	davinci_common_init(&davinci_soc_info_da850);
+}

arch/arm/mach-davinci/devices-da8xx.c

@@ -0,0 +1,450 @@
+/*
+ * DA8XX/OMAP L1XX platform device data
+ *
+ * Copyright (c) 2007-2009, MontaVista Software, Inc. <source@mvista.com>
+ * Derived from code that was:
+ *	Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/serial_8250.h>
+
+#include <mach/cputype.h>
+#include <mach/common.h>
+#include <mach/time.h>
+#include <mach/da8xx.h>
+#include <video/da8xx-fb.h>
+
+#include "clock.h"
+
+#define DA8XX_TPCC_BASE			0x01c00000
+#define DA8XX_TPTC0_BASE		0x01c08000
+#define DA8XX_TPTC1_BASE		0x01c08400
+#define DA8XX_WDOG_BASE			0x01c21000 /* DA8XX_TIMER64P1_BASE */
+#define DA8XX_I2C0_BASE			0x01c22000
+#define DA8XX_EMAC_CPPI_PORT_BASE	0x01e20000
+#define DA8XX_EMAC_CPGMACSS_BASE	0x01e22000
+#define DA8XX_EMAC_CPGMAC_BASE		0x01e23000
+#define DA8XX_EMAC_MDIO_BASE		0x01e24000
+#define DA8XX_GPIO_BASE			0x01e26000
+#define DA8XX_I2C1_BASE			0x01e28000
+
+#define DA8XX_EMAC_CTRL_REG_OFFSET	0x3000
+#define DA8XX_EMAC_MOD_REG_OFFSET	0x2000
+#define DA8XX_EMAC_RAM_OFFSET		0x0000
+#define DA8XX_MDIO_REG_OFFSET		0x4000
+#define DA8XX_EMAC_CTRL_RAM_SIZE	SZ_8K
+
+static struct plat_serial8250_port da8xx_serial_pdata[] = {
+	{
+		.mapbase	= DA8XX_UART0_BASE,
+		.irq		= IRQ_DA8XX_UARTINT0,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+					UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+	},
+	{
+		.mapbase	= DA8XX_UART1_BASE,
+		.irq		= IRQ_DA8XX_UARTINT1,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+					UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+	},
+	{
+		.mapbase	= DA8XX_UART2_BASE,
+		.irq		= IRQ_DA8XX_UARTINT2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+					UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+	},
+	{
+		.flags	= 0,
+	},
+};
+
+struct platform_device da8xx_serial_device = {
+	.name	= "serial8250",
+	.id	= PLAT8250_DEV_PLATFORM,
+	.dev	= {
+		.platform_data	= da8xx_serial_pdata,
+	},
+};
+
+static const s8 da8xx_dma_chan_no_event[] = {
+	20, 21,
+	-1
+};
+
+static const s8 da8xx_queue_tc_mapping[][2] = {
+	/* {event queue no, TC no} */
+	{0, 0},
+	{1, 1},
+	{-1, -1}
+};
+
+static const s8 da8xx_queue_priority_mapping[][2] = {
+	/* {event queue no, Priority} */
+	{0, 3},
+	{1, 7},
+	{-1, -1}
+};
+
+static struct edma_soc_info da8xx_edma_info[] = {
+	{
+		.n_channel		= 32,
+		.n_region		= 4,
+		.n_slot			= 128,
+		.n_tc			= 2,
+		.n_cc			= 1,
+		.noevent		= da8xx_dma_chan_no_event,
+		.queue_tc_mapping	= da8xx_queue_tc_mapping,
+		.queue_priority_mapping	= da8xx_queue_priority_mapping,
+	},
+};
+
+static struct resource da8xx_edma_resources[] = {
+	{
+		.name	= "edma_cc0",
+		.start	= DA8XX_TPCC_BASE,
+		.end	= DA8XX_TPCC_BASE + SZ_32K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc0",
+		.start	= DA8XX_TPTC0_BASE,
+		.end	= DA8XX_TPTC0_BASE + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc1",
+		.start	= DA8XX_TPTC1_BASE,
+		.end	= DA8XX_TPTC1_BASE + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma0",
+		.start	= IRQ_DA8XX_CCINT0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.name	= "edma0_err",
+		.start	= IRQ_DA8XX_CCERRINT,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device da8xx_edma_device = {
+	.name		= "edma",
+	.id		= -1,
+	.dev = {
+		.platform_data	= da8xx_edma_info,
+	},
+	.num_resources	= ARRAY_SIZE(da8xx_edma_resources),
+	.resource	= da8xx_edma_resources,
+};
+
+int __init da8xx_register_edma(void)
+{
+	return platform_device_register(&da8xx_edma_device);
+}
+
+static struct resource da8xx_i2c_resources0[] = {
+	{
+		.start	= DA8XX_I2C0_BASE,
+		.end	= DA8XX_I2C0_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_DA8XX_I2CINT0,
+		.end	= IRQ_DA8XX_I2CINT0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device da8xx_i2c_device0 = {
+	.name		= "i2c_davinci",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(da8xx_i2c_resources0),
+	.resource	= da8xx_i2c_resources0,
+};
+
+static struct resource da8xx_i2c_resources1[] = {
+	{
+		.start	= DA8XX_I2C1_BASE,
+		.end	= DA8XX_I2C1_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_DA8XX_I2CINT1,
+		.end	= IRQ_DA8XX_I2CINT1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device da8xx_i2c_device1 = {
+	.name		= "i2c_davinci",
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(da8xx_i2c_resources1),
+	.resource	= da8xx_i2c_resources1,
+};
+
+int __init da8xx_register_i2c(int instance,
+		struct davinci_i2c_platform_data *pdata)
+{
+	struct platform_device *pdev;
+
+	if (instance == 0)
+		pdev = &da8xx_i2c_device0;
+	else if (instance == 1)
+		pdev = &da8xx_i2c_device1;
+	else
+		return -EINVAL;
+
+	pdev->dev.platform_data = pdata;
+	return platform_device_register(pdev);
+}
+
+static struct resource da8xx_watchdog_resources[] = {
+	{
+		.start	= DA8XX_WDOG_BASE,
+		.end	= DA8XX_WDOG_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device davinci_wdt_device = {
+	.name		= "watchdog",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(da8xx_watchdog_resources),
+	.resource	= da8xx_watchdog_resources,
+};
+
+int __init da8xx_register_watchdog(void)
+{
+	return platform_device_register(&davinci_wdt_device);
+}
+
+static struct resource da8xx_emac_resources[] = {
+	{
+		.start	= DA8XX_EMAC_CPPI_PORT_BASE,
+		.end	= DA8XX_EMAC_CPPI_PORT_BASE + 0x5000 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_DA8XX_C0_RX_THRESH_PULSE,
+		.end	= IRQ_DA8XX_C0_RX_THRESH_PULSE,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_C0_RX_PULSE,
+		.end	= IRQ_DA8XX_C0_RX_PULSE,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_C0_TX_PULSE,
+		.end	= IRQ_DA8XX_C0_TX_PULSE,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_C0_MISC_PULSE,
+		.end	= IRQ_DA8XX_C0_MISC_PULSE,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct emac_platform_data da8xx_emac_pdata = {
+	.ctrl_reg_offset	= DA8XX_EMAC_CTRL_REG_OFFSET,
+	.ctrl_mod_reg_offset	= DA8XX_EMAC_MOD_REG_OFFSET,
+	.ctrl_ram_offset	= DA8XX_EMAC_RAM_OFFSET,
+	.mdio_reg_offset	= DA8XX_MDIO_REG_OFFSET,
+	.ctrl_ram_size		= DA8XX_EMAC_CTRL_RAM_SIZE,
+	.version		= EMAC_VERSION_2,
+};
+
+static struct platform_device da8xx_emac_device = {
+	.name		= "davinci_emac",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &da8xx_emac_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(da8xx_emac_resources),
+	.resource	= da8xx_emac_resources,
+};
+
+static struct resource da830_mcasp1_resources[] = {
+	{
+		.name	= "mcasp1",
+		.start	= DAVINCI_DA830_MCASP1_REG_BASE,
+		.end	= DAVINCI_DA830_MCASP1_REG_BASE + (SZ_1K * 12) - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	/* TX event */
+	{
+		.start	= DAVINCI_DA830_DMA_MCASP1_AXEVT,
+		.end	= DAVINCI_DA830_DMA_MCASP1_AXEVT,
+		.flags	= IORESOURCE_DMA,
+	},
+	/* RX event */
+	{
+		.start	= DAVINCI_DA830_DMA_MCASP1_AREVT,
+		.end	= DAVINCI_DA830_DMA_MCASP1_AREVT,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device da830_mcasp1_device = {
+	.name		= "davinci-mcasp",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(da830_mcasp1_resources),
+	.resource	= da830_mcasp1_resources,
+};
+
+static struct resource da850_mcasp_resources[] = {
+	{
+		.name	= "mcasp",
+		.start	= DAVINCI_DA8XX_MCASP0_REG_BASE,
+		.end	= DAVINCI_DA8XX_MCASP0_REG_BASE + (SZ_1K * 12) - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	/* TX event */
+	{
+		.start	= DAVINCI_DA8XX_DMA_MCASP0_AXEVT,
+		.end	= DAVINCI_DA8XX_DMA_MCASP0_AXEVT,
+		.flags	= IORESOURCE_DMA,
+	},
+	/* RX event */
+	{
+		.start	= DAVINCI_DA8XX_DMA_MCASP0_AREVT,
+		.end	= DAVINCI_DA8XX_DMA_MCASP0_AREVT,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device da850_mcasp_device = {
+	.name		= "davinci-mcasp",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(da850_mcasp_resources),
+	.resource	= da850_mcasp_resources,
+};
+
+int __init da8xx_register_emac(void)
+{
+	return platform_device_register(&da8xx_emac_device);
+}
+
+void __init da8xx_init_mcasp(int id, struct snd_platform_data *pdata)
+{
+	/* DA830/OMAP-L137 has 3 instances of McASP */
+	if (cpu_is_davinci_da830() && id == 1) {
+		da830_mcasp1_device.dev.platform_data = pdata;
+		platform_device_register(&da830_mcasp1_device);
+	} else if (cpu_is_davinci_da850()) {
+		da850_mcasp_device.dev.platform_data = pdata;
+		platform_device_register(&da850_mcasp_device);
+	}
+}
+
+static const struct display_panel disp_panel = {
+	QVGA,
+	16,
+	16,
+	COLOR_ACTIVE,
+};
+
+static struct lcd_ctrl_config lcd_cfg = {
+	&disp_panel,
+	.ac_bias		= 255,
+	.ac_bias_intrpt		= 0,
+	.dma_burst_sz		= 16,
+	.bpp			= 16,
+	.fdd			= 255,
+	.tft_alt_mode		= 0,
+	.stn_565_mode		= 0,
+	.mono_8bit_mode		= 0,
+	.invert_line_clock	= 1,
+	.invert_frm_clock	= 1,
+	.sync_edge		= 0,
+	.sync_ctrl		= 1,
+	.raster_order		= 0,
+};
+
+static struct da8xx_lcdc_platform_data da850_evm_lcdc_pdata = {
+	.manu_name = "sharp",
+	.controller_data = &lcd_cfg,
+	.type = "Sharp_LK043T1DG01",
+};
+
+static struct resource da8xx_lcdc_resources[] = {
+	[0] = { /* registers */
+		.start  = DA8XX_LCD_CNTRL_BASE,
+		.end    = DA8XX_LCD_CNTRL_BASE + SZ_4K - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = { /* interrupt */
+		.start  = IRQ_DA8XX_LCDINT,
+		.end    = IRQ_DA8XX_LCDINT,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device da850_lcdc_device = {
+	.name		= "da8xx_lcdc",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(da8xx_lcdc_resources),
+	.resource	= da8xx_lcdc_resources,
+	.dev = {
+		.platform_data = &da850_evm_lcdc_pdata,
+	}
+};
+
+int __init da8xx_register_lcdc(void)
+{
+	return platform_device_register(&da850_lcdc_device);
+}
+
+static struct resource da8xx_mmcsd0_resources[] = {
+	{		/* registers */
+		.start	= DA8XX_MMCSD0_BASE,
+		.end	= DA8XX_MMCSD0_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{		/* interrupt */
+		.start	= IRQ_DA8XX_MMCSDINT0,
+		.end	= IRQ_DA8XX_MMCSDINT0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{		/* DMA RX */
+		.start	= EDMA_CTLR_CHAN(0, 16),
+		.end	= EDMA_CTLR_CHAN(0, 16),
+		.flags	= IORESOURCE_DMA,
+	},
+	{		/* DMA TX */
+		.start	= EDMA_CTLR_CHAN(0, 17),
+		.end	= EDMA_CTLR_CHAN(0, 17),
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device da8xx_mmcsd0_device = {
+	.name		= "davinci_mmc",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(da8xx_mmcsd0_resources),
+	.resource	= da8xx_mmcsd0_resources,
+};
+
+int __init da8xx_register_mmcsd0(struct davinci_mmc_config *config)
+{
+	da8xx_mmcsd0_device.dev.platform_data = config;
+	return platform_device_register(&da8xx_mmcsd0_device);
+}

arch/arm/mach-davinci/devices.c

@@ -31,6 +31,8 @@
 #define DAVINCI_MMCSD0_BASE	     0x01E10000
 #define DM355_MMCSD0_BASE	     0x01E11000
 #define DM355_MMCSD1_BASE	     0x01E00000
+#define DM365_MMCSD0_BASE	     0x01D11000
+#define DM365_MMCSD1_BASE	     0x01D00000
 
 static struct resource i2c_resources[] = {
 	{
@@ -82,10 +84,10 @@ static struct resource mmcsd0_resources[] = {
 	},
 	/* DMA channels: RX, then TX */
 	{
-		.start = DAVINCI_DMA_MMCRXEVT,
+		.start = EDMA_CTLR_CHAN(0, DAVINCI_DMA_MMCRXEVT),
 		.flags = IORESOURCE_DMA,
 	}, {
-		.start = DAVINCI_DMA_MMCTXEVT,
+		.start = EDMA_CTLR_CHAN(0, DAVINCI_DMA_MMCTXEVT),
 		.flags = IORESOURCE_DMA,
 	},
 };
@@ -119,10 +121,10 @@ static struct resource mmcsd1_resources[] = {
 	},
 	/* DMA channels: RX, then TX */
 	{
-		.start = 30,	/* rx */
+		.start = EDMA_CTLR_CHAN(0, 30),	/* rx */
 		.flags = IORESOURCE_DMA,
 	}, {
-		.start = 31,	/* tx */
+		.start = EDMA_CTLR_CHAN(0, 31),	/* tx */
 		.flags = IORESOURCE_DMA,
 	},
 };
@@ -154,19 +156,31 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
 	 */
 	switch (module) {
 	case 1:
-		if (!cpu_is_davinci_dm355())
+		if (cpu_is_davinci_dm355()) {
+			/* REVISIT we may not need all these pins if e.g. this
+			 * is a hard-wired SDIO device...
+			 */
+			davinci_cfg_reg(DM355_SD1_CMD);
+			davinci_cfg_reg(DM355_SD1_CLK);
+			davinci_cfg_reg(DM355_SD1_DATA0);
+			davinci_cfg_reg(DM355_SD1_DATA1);
+			davinci_cfg_reg(DM355_SD1_DATA2);
+			davinci_cfg_reg(DM355_SD1_DATA3);
+		} else if (cpu_is_davinci_dm365()) {
+			void __iomem *pupdctl1 =
+				IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE + 0x7c);
+
+			/* Configure pull down control */
+			__raw_writel((__raw_readl(pupdctl1) & ~0x400),
+					pupdctl1);
+
+			mmcsd1_resources[0].start = DM365_MMCSD1_BASE;
+			mmcsd1_resources[0].end = DM365_MMCSD1_BASE +
+							SZ_4K - 1;
+			mmcsd0_resources[2].start = IRQ_DM365_SDIOINT1;
+		} else
 			break;
 
-		/* REVISIT we may not need all these pins if e.g. this
-		 * is a hard-wired SDIO device...
-		 */
-		davinci_cfg_reg(DM355_SD1_CMD);
-		davinci_cfg_reg(DM355_SD1_CLK);
-		davinci_cfg_reg(DM355_SD1_DATA0);
-		davinci_cfg_reg(DM355_SD1_DATA1);
-		davinci_cfg_reg(DM355_SD1_DATA2);
-		davinci_cfg_reg(DM355_SD1_DATA3);
-
 		pdev = &davinci_mmcsd1_device;
 		break;
 	case 0:
@@ -180,9 +194,12 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
 
 			/* enable RX EDMA */
 			davinci_cfg_reg(DM355_EVT26_MMC0_RX);
-		}
-
-		else if (cpu_is_davinci_dm644x()) {
+		} else if (cpu_is_davinci_dm365()) {
+			mmcsd0_resources[0].start = DM365_MMCSD0_BASE;
+			mmcsd0_resources[0].end = DM365_MMCSD0_BASE +
+							SZ_4K - 1;
+			mmcsd0_resources[2].start = IRQ_DM365_SDIOINT0;
+		} else if (cpu_is_davinci_dm644x()) {
 			/* REVISIT: should this be in board-init code? */
 			void __iomem *base =
 				IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE);
@@ -216,6 +233,8 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
 
 static struct resource wdt_resources[] = {
 	{
+		.start	= DAVINCI_WDOG_BASE,
+		.end	= DAVINCI_WDOG_BASE + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 };
@@ -229,11 +248,6 @@ struct platform_device davinci_wdt_device = {
 
 static void davinci_init_wdt(void)
 {
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-
-	wdt_resources[0].start = (resource_size_t)soc_info->wdt_base;
-	wdt_resources[0].end = (resource_size_t)soc_info->wdt_base + SZ_1K - 1;
-
 	platform_device_register(&davinci_wdt_device);
 }
 

arch/arm/mach-davinci/dm355.c

@@ -30,6 +30,7 @@
 #include <mach/time.h>
 #include <mach/serial.h>
 #include <mach/common.h>
+#include <mach/asp.h>
 
 #include "clock.h"
 #include "mux.h"
@@ -360,8 +361,8 @@ static struct davinci_clk dm355_clks[] = {
 	CLK(NULL, "uart1", &uart1_clk),
 	CLK(NULL, "uart2", &uart2_clk),
 	CLK("i2c_davinci.1", NULL, &i2c_clk),
-	CLK("soc-audio.0", NULL, &asp0_clk),
-	CLK("soc-audio.1", NULL, &asp1_clk),
+	CLK("davinci-asp.0", NULL, &asp0_clk),
+	CLK("davinci-asp.1", NULL, &asp1_clk),
 	CLK("davinci_mmc.0", NULL, &mmcsd0_clk),
 	CLK("davinci_mmc.1", NULL, &mmcsd1_clk),
 	CLK(NULL, "spi0", &spi0_clk),
@@ -481,6 +482,20 @@ INT_CFG(DM355,  INT_EDMA_TC1_ERR,     4,    1,    1,     false)
 EVT_CFG(DM355,  EVT8_ASP1_TX,	      0,    1,    0,     false)
 EVT_CFG(DM355,  EVT9_ASP1_RX,	      1,    1,    0,     false)
 EVT_CFG(DM355,  EVT26_MMC0_RX,	      2,    1,    0,     false)
+
+MUX_CFG(DM355,	VOUT_FIELD,	1,   18,    3,	  1,	 false)
+MUX_CFG(DM355,	VOUT_FIELD_G70,	1,   18,    3,	  0,	 false)
+MUX_CFG(DM355,	VOUT_HVSYNC,	1,   16,    1,	  0,	 false)
+MUX_CFG(DM355,	VOUT_COUTL_EN,	1,   0,     0xff, 0x55,  false)
+MUX_CFG(DM355,	VOUT_COUTH_EN,	1,   8,     0xff, 0x55,  false)
+
+MUX_CFG(DM355,	VIN_PCLK,	0,   14,    1,    1,	 false)
+MUX_CFG(DM355,	VIN_CAM_WEN,	0,   13,    1,    1,	 false)
+MUX_CFG(DM355,	VIN_CAM_VD,	0,   12,    1,    1,	 false)
+MUX_CFG(DM355,	VIN_CAM_HD,	0,   11,    1,    1,	 false)
+MUX_CFG(DM355,	VIN_YIN_EN,	0,   10,    1,    1,	 false)
+MUX_CFG(DM355,	VIN_CINL_EN,	0,   0,   0xff, 0x55,	 false)
+MUX_CFG(DM355,	VIN_CINH_EN,	0,   8,     3,    3,	 false)
 #endif
 };
 
@@ -558,17 +573,38 @@ static const s8 dma_chan_dm355_no_event[] = {
 	-1
 };
 
-static struct edma_soc_info dm355_edma_info = {
-	.n_channel	= 64,
-	.n_region	= 4,
-	.n_slot		= 128,
-	.n_tc		= 2,
-	.noevent	= dma_chan_dm355_no_event,
+static const s8
+queue_tc_mapping[][2] = {
+	/* {event queue no, TC no} */
+	{0, 0},
+	{1, 1},
+	{-1, -1},
+};
+
+static const s8
+queue_priority_mapping[][2] = {
+	/* {event queue no, Priority} */
+	{0, 3},
+	{1, 7},
+	{-1, -1},
+};
+
+static struct edma_soc_info dm355_edma_info[] = {
+	{
+		.n_channel		= 64,
+		.n_region		= 4,
+		.n_slot			= 128,
+		.n_tc			= 2,
+		.n_cc			= 1,
+		.noevent		= dma_chan_dm355_no_event,
+		.queue_tc_mapping	= queue_tc_mapping,
+		.queue_priority_mapping	= queue_priority_mapping,
+	},
 };
 
 static struct resource edma_resources[] = {
 	{
-		.name	= "edma_cc",
+		.name	= "edma_cc0",
 		.start	= 0x01c00000,
 		.end	= 0x01c00000 + SZ_64K - 1,
 		.flags	= IORESOURCE_MEM,
@@ -586,10 +622,12 @@ static struct resource edma_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	{
+		.name	= "edma0",
 		.start	= IRQ_CCINT0,
 		.flags	= IORESOURCE_IRQ,
 	},
 	{
+		.name	= "edma0_err",
 		.start	= IRQ_CCERRINT,
 		.flags	= IORESOURCE_IRQ,
 	},
@@ -598,12 +636,98 @@ static struct resource edma_resources[] = {
 
 static struct platform_device dm355_edma_device = {
 	.name			= "edma",
-	.id			= -1,
-	.dev.platform_data	= &dm355_edma_info,
+	.id			= 0,
+	.dev.platform_data	= dm355_edma_info,
 	.num_resources		= ARRAY_SIZE(edma_resources),
 	.resource		= edma_resources,
 };
 
+static struct resource dm355_asp1_resources[] = {
+	{
+		.start	= DAVINCI_ASP1_BASE,
+		.end	= DAVINCI_ASP1_BASE + SZ_8K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= DAVINCI_DMA_ASP1_TX,
+		.end	= DAVINCI_DMA_ASP1_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	{
+		.start	= DAVINCI_DMA_ASP1_RX,
+		.end	= DAVINCI_DMA_ASP1_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device dm355_asp1_device = {
+	.name		= "davinci-asp",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(dm355_asp1_resources),
+	.resource	= dm355_asp1_resources,
+};
+
+static struct resource dm355_vpss_resources[] = {
+	{
+		/* VPSS BL Base address */
+		.name		= "vpss",
+		.start          = 0x01c70800,
+		.end            = 0x01c70800 + 0xff,
+		.flags          = IORESOURCE_MEM,
+	},
+	{
+		/* VPSS CLK Base address */
+		.name		= "vpss",
+		.start          = 0x01c70000,
+		.end            = 0x01c70000 + 0xf,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device dm355_vpss_device = {
+	.name			= "vpss",
+	.id			= -1,
+	.dev.platform_data	= "dm355_vpss",
+	.num_resources		= ARRAY_SIZE(dm355_vpss_resources),
+	.resource		= dm355_vpss_resources,
+};
+
+static struct resource vpfe_resources[] = {
+	{
+		.start          = IRQ_VDINT0,
+		.end            = IRQ_VDINT0,
+		.flags          = IORESOURCE_IRQ,
+	},
+	{
+		.start          = IRQ_VDINT1,
+		.end            = IRQ_VDINT1,
+		.flags          = IORESOURCE_IRQ,
+	},
+	/* CCDC Base address */
+	{
+		.flags          = IORESOURCE_MEM,
+		.start          = 0x01c70600,
+		.end            = 0x01c70600 + 0x1ff,
+	},
+};
+
+static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
+static struct platform_device vpfe_capture_dev = {
+	.name		= CAPTURE_DRV_NAME,
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(vpfe_resources),
+	.resource	= vpfe_resources,
+	.dev = {
+		.dma_mask		= &vpfe_capture_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+void dm355_set_vpfe_config(struct vpfe_config *cfg)
+{
+	vpfe_capture_dev.dev.platform_data = cfg;
+}
+
 /*----------------------------------------------------------------------*/
 
 static struct map_desc dm355_io_desc[] = {
@@ -704,7 +828,6 @@ static struct davinci_soc_info davinci_soc_info_dm355 = {
 	.intc_irq_prios		= dm355_default_priorities,
 	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
 	.timer_info		= &dm355_timer_info,
-	.wdt_base		= IO_ADDRESS(DAVINCI_WDOG_BASE),
 	.gpio_base		= IO_ADDRESS(DAVINCI_GPIO_BASE),
 	.gpio_num		= 104,
 	.gpio_irq		= IRQ_DM355_GPIOBNK0,
@@ -713,6 +836,19 @@ static struct davinci_soc_info davinci_soc_info_dm355 = {
 	.sram_len		= SZ_32K,
 };
 
+void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata)
+{
+	/* we don't use ASP1 IRQs, or we'd need to mux them ... */
+	if (evt_enable & ASP1_TX_EVT_EN)
+		davinci_cfg_reg(DM355_EVT8_ASP1_TX);
+
+	if (evt_enable & ASP1_RX_EVT_EN)
+		davinci_cfg_reg(DM355_EVT9_ASP1_RX);
+
+	dm355_asp1_device.dev.platform_data = pdata;
+	platform_device_register(&dm355_asp1_device);
+}
+
 void __init dm355_init(void)
 {
 	davinci_common_init(&davinci_soc_info_dm355);
@@ -725,6 +861,20 @@ static int __init dm355_init_devices(void)
 
 	davinci_cfg_reg(DM355_INT_EDMA_CC);
 	platform_device_register(&dm355_edma_device);
+	platform_device_register(&dm355_vpss_device);
+	/*
+	 * setup Mux configuration for vpfe input and register
+	 * vpfe capture platform device
+	 */
+	davinci_cfg_reg(DM355_VIN_PCLK);
+	davinci_cfg_reg(DM355_VIN_CAM_WEN);
+	davinci_cfg_reg(DM355_VIN_CAM_VD);
+	davinci_cfg_reg(DM355_VIN_CAM_HD);
+	davinci_cfg_reg(DM355_VIN_YIN_EN);
+	davinci_cfg_reg(DM355_VIN_CINL_EN);
+	davinci_cfg_reg(DM355_VIN_CINH_EN);
+	platform_device_register(&vpfe_capture_dev);
+
 	return 0;
 }
 postcore_initcall(dm355_init_devices);

arch/arm/mach-davinci/dm365.c

@@ -0,0 +1,926 @@
+/*
+ * TI DaVinci DM365 chip specific setup
+ *
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/serial_8250.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/dm365.h>
+#include <mach/clock.h>
+#include <mach/cputype.h>
+#include <mach/edma.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
+#include <mach/irqs.h>
+#include <mach/time.h>
+#include <mach/serial.h>
+#include <mach/common.h>
+
+#include "clock.h"
+#include "mux.h"
+
+#define DM365_REF_FREQ		24000000	/* 24 MHz on the DM365 EVM */
+
+static struct pll_data pll1_data = {
+	.num		= 1,
+	.phys_base	= DAVINCI_PLL1_BASE,
+	.flags		= PLL_HAS_POSTDIV | PLL_HAS_PREDIV,
+};
+
+static struct pll_data pll2_data = {
+	.num		= 2,
+	.phys_base	= DAVINCI_PLL2_BASE,
+	.flags		= PLL_HAS_POSTDIV | PLL_HAS_PREDIV,
+};
+
+static struct clk ref_clk = {
+	.name		= "ref_clk",
+	.rate		= DM365_REF_FREQ,
+};
+
+static struct clk pll1_clk = {
+	.name		= "pll1",
+	.parent		= &ref_clk,
+	.flags		= CLK_PLL,
+	.pll_data	= &pll1_data,
+};
+
+static struct clk pll1_aux_clk = {
+	.name		= "pll1_aux_clk",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL | PRE_PLL,
+};
+
+static struct clk pll1_sysclkbp = {
+	.name		= "pll1_sysclkbp",
+	.parent		= &pll1_clk,
+	.flags 		= CLK_PLL | PRE_PLL,
+	.div_reg	= BPDIV
+};
+
+static struct clk clkout0_clk = {
+	.name		= "clkout0",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL | PRE_PLL,
+};
+
+static struct clk pll1_sysclk1 = {
+	.name		= "pll1_sysclk1",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV1,
+};
+
+static struct clk pll1_sysclk2 = {
+	.name		= "pll1_sysclk2",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV2,
+};
+
+static struct clk pll1_sysclk3 = {
+	.name		= "pll1_sysclk3",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV3,
+};
+
+static struct clk pll1_sysclk4 = {
+	.name		= "pll1_sysclk4",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV4,
+};
+
+static struct clk pll1_sysclk5 = {
+	.name		= "pll1_sysclk5",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV5,
+};
+
+static struct clk pll1_sysclk6 = {
+	.name		= "pll1_sysclk6",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV6,
+};
+
+static struct clk pll1_sysclk7 = {
+	.name		= "pll1_sysclk7",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV7,
+};
+
+static struct clk pll1_sysclk8 = {
+	.name		= "pll1_sysclk8",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV8,
+};
+
+static struct clk pll1_sysclk9 = {
+	.name		= "pll1_sysclk9",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV9,
+};
+
+static struct clk pll2_clk = {
+	.name		= "pll2",
+	.parent		= &ref_clk,
+	.flags		= CLK_PLL,
+	.pll_data	= &pll2_data,
+};
+
+static struct clk pll2_aux_clk = {
+	.name		= "pll2_aux_clk",
+	.parent		= &pll2_clk,
+	.flags		= CLK_PLL | PRE_PLL,
+};
+
+static struct clk clkout1_clk = {
+	.name		= "clkout1",
+	.parent		= &pll2_clk,
+	.flags		= CLK_PLL | PRE_PLL,
+};
+
+static struct clk pll2_sysclk1 = {
+	.name		= "pll2_sysclk1",
+	.parent		= &pll2_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV1,
+};
+
+static struct clk pll2_sysclk2 = {
+	.name		= "pll2_sysclk2",
+	.parent		= &pll2_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV2,
+};
+
+static struct clk pll2_sysclk3 = {
+	.name		= "pll2_sysclk3",
+	.parent		= &pll2_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV3,
+};
+
+static struct clk pll2_sysclk4 = {
+	.name		= "pll2_sysclk4",
+	.parent		= &pll2_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV4,
+};
+
+static struct clk pll2_sysclk5 = {
+	.name		= "pll2_sysclk5",
+	.parent		= &pll2_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV5,
+};
+
+static struct clk pll2_sysclk6 = {
+	.name		= "pll2_sysclk6",
+	.parent		= &pll2_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV6,
+};
+
+static struct clk pll2_sysclk7 = {
+	.name		= "pll2_sysclk7",
+	.parent		= &pll2_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV7,
+};
+
+static struct clk pll2_sysclk8 = {
+	.name		= "pll2_sysclk8",
+	.parent		= &pll2_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV8,
+};
+
+static struct clk pll2_sysclk9 = {
+	.name		= "pll2_sysclk9",
+	.parent		= &pll2_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV9,
+};
+
+static struct clk vpss_dac_clk = {
+	.name		= "vpss_dac",
+	.parent		= &pll1_sysclk3,
+	.lpsc		= DM365_LPSC_DAC_CLK,
+};
+
+static struct clk vpss_master_clk = {
+	.name		= "vpss_master",
+	.parent		= &pll1_sysclk5,
+	.lpsc		= DM365_LPSC_VPSSMSTR,
+	.flags		= CLK_PSC,
+};
+
+static struct clk arm_clk = {
+	.name		= "arm_clk",
+	.parent		= &pll2_sysclk2,
+	.lpsc		= DAVINCI_LPSC_ARM,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk uart0_clk = {
+	.name		= "uart0",
+	.parent		= &pll1_aux_clk,
+	.lpsc		= DAVINCI_LPSC_UART0,
+};
+
+static struct clk uart1_clk = {
+	.name		= "uart1",
+	.parent		= &pll1_sysclk4,
+	.lpsc		= DAVINCI_LPSC_UART1,
+};
+
+static struct clk i2c_clk = {
+	.name		= "i2c",
+	.parent		= &pll1_aux_clk,
+	.lpsc		= DAVINCI_LPSC_I2C,
+};
+
+static struct clk mmcsd0_clk = {
+	.name		= "mmcsd0",
+	.parent		= &pll1_sysclk8,
+	.lpsc		= DAVINCI_LPSC_MMC_SD,
+};
+
+static struct clk mmcsd1_clk = {
+	.name		= "mmcsd1",
+	.parent		= &pll1_sysclk4,
+	.lpsc		= DM365_LPSC_MMC_SD1,
+};
+
+static struct clk spi0_clk = {
+	.name		= "spi0",
+	.parent		= &pll1_sysclk4,
+	.lpsc		= DAVINCI_LPSC_SPI,
+};
+
+static struct clk spi1_clk = {
+	.name		= "spi1",
+	.parent		= &pll1_sysclk4,
+	.lpsc		= DM365_LPSC_SPI1,
+};
+
+static struct clk spi2_clk = {
+	.name		= "spi2",
+	.parent		= &pll1_sysclk4,
+	.lpsc		= DM365_LPSC_SPI2,
+};
+
+static struct clk spi3_clk = {
+	.name		= "spi3",
+	.parent		= &pll1_sysclk4,
+	.lpsc		= DM365_LPSC_SPI3,
+};
+
+static struct clk spi4_clk = {
+	.name		= "spi4",
+	.parent		= &pll1_aux_clk,
+	.lpsc		= DM365_LPSC_SPI4,
+};
+
+static struct clk gpio_clk = {
+	.name		= "gpio",
+	.parent		= &pll1_sysclk4,
+	.lpsc		= DAVINCI_LPSC_GPIO,
+};
+
+static struct clk aemif_clk = {
+	.name		= "aemif",
+	.parent		= &pll1_sysclk4,
+	.lpsc		= DAVINCI_LPSC_AEMIF,
+};
+
+static struct clk pwm0_clk = {
+	.name		= "pwm0",
+	.parent		= &pll1_aux_clk,
+	.lpsc		= DAVINCI_LPSC_PWM0,
+};
+
+static struct clk pwm1_clk = {
+	.name		= "pwm1",
+	.parent		= &pll1_aux_clk,
+	.lpsc		= DAVINCI_LPSC_PWM1,
+};
+
+static struct clk pwm2_clk = {
+	.name		= "pwm2",
+	.parent		= &pll1_aux_clk,
+	.lpsc		= DAVINCI_LPSC_PWM2,
+};
+
+static struct clk pwm3_clk = {
+	.name		= "pwm3",
+	.parent		= &ref_clk,
+	.lpsc		= DM365_LPSC_PWM3,
+};
+
+static struct clk timer0_clk = {
+	.name		= "timer0",
+	.parent		= &pll1_aux_clk,
+	.lpsc		= DAVINCI_LPSC_TIMER0,
+};
+
+static struct clk timer1_clk = {
+	.name		= "timer1",
+	.parent		= &pll1_aux_clk,
+	.lpsc		= DAVINCI_LPSC_TIMER1,
+};
+
+static struct clk timer2_clk = {
+	.name		= "timer2",
+	.parent		= &pll1_aux_clk,
+	.lpsc		= DAVINCI_LPSC_TIMER2,
+	.usecount	= 1,
+};
+
+static struct clk timer3_clk = {
+	.name		= "timer3",
+	.parent		= &pll1_aux_clk,
+	.lpsc		= DM365_LPSC_TIMER3,
+};
+
+static struct clk usb_clk = {
+	.name		= "usb",
+	.parent		= &pll2_sysclk1,
+	.lpsc		= DAVINCI_LPSC_USB,
+};
+
+static struct clk emac_clk = {
+	.name		= "emac",
+	.parent		= &pll1_sysclk4,
+	.lpsc		= DM365_LPSC_EMAC,
+};
+
+static struct clk voicecodec_clk = {
+	.name		= "voice_codec",
+	.parent		= &pll2_sysclk4,
+	.lpsc		= DM365_LPSC_VOICE_CODEC,
+};
+
+static struct clk asp0_clk = {
+	.name		= "asp0",
+	.parent		= &pll1_sysclk4,
+	.lpsc		= DM365_LPSC_McBSP1,
+};
+
+static struct clk rto_clk = {
+	.name		= "rto",
+	.parent		= &pll1_sysclk4,
+	.lpsc		= DM365_LPSC_RTO,
+};
+
+static struct clk mjcp_clk = {
+	.name		= "mjcp",
+	.parent		= &pll1_sysclk3,
+	.lpsc		= DM365_LPSC_MJCP,
+};
+
+static struct davinci_clk dm365_clks[] = {
+	CLK(NULL, "ref", &ref_clk),
+	CLK(NULL, "pll1", &pll1_clk),
+	CLK(NULL, "pll1_aux", &pll1_aux_clk),
+	CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp),
+	CLK(NULL, "clkout0", &clkout0_clk),
+	CLK(NULL, "pll1_sysclk1", &pll1_sysclk1),
+	CLK(NULL, "pll1_sysclk2", &pll1_sysclk2),
+	CLK(NULL, "pll1_sysclk3", &pll1_sysclk3),
+	CLK(NULL, "pll1_sysclk4", &pll1_sysclk4),
+	CLK(NULL, "pll1_sysclk5", &pll1_sysclk5),
+	CLK(NULL, "pll1_sysclk6", &pll1_sysclk6),
+	CLK(NULL, "pll1_sysclk7", &pll1_sysclk7),
+	CLK(NULL, "pll1_sysclk8", &pll1_sysclk8),
+	CLK(NULL, "pll1_sysclk9", &pll1_sysclk9),
+	CLK(NULL, "pll2", &pll2_clk),
+	CLK(NULL, "pll2_aux", &pll2_aux_clk),
+	CLK(NULL, "clkout1", &clkout1_clk),
+	CLK(NULL, "pll2_sysclk1", &pll2_sysclk1),
+	CLK(NULL, "pll2_sysclk2", &pll2_sysclk2),
+	CLK(NULL, "pll2_sysclk3", &pll2_sysclk3),
+	CLK(NULL, "pll2_sysclk4", &pll2_sysclk4),
+	CLK(NULL, "pll2_sysclk5", &pll2_sysclk5),
+	CLK(NULL, "pll2_sysclk6", &pll2_sysclk6),
+	CLK(NULL, "pll2_sysclk7", &pll2_sysclk7),
+	CLK(NULL, "pll2_sysclk8", &pll2_sysclk8),
+	CLK(NULL, "pll2_sysclk9", &pll2_sysclk9),
+	CLK(NULL, "vpss_dac", &vpss_dac_clk),
+	CLK(NULL, "vpss_master", &vpss_master_clk),
+	CLK(NULL, "arm", &arm_clk),
+	CLK(NULL, "uart0", &uart0_clk),
+	CLK(NULL, "uart1", &uart1_clk),
+	CLK("i2c_davinci.1", NULL, &i2c_clk),
+	CLK("davinci_mmc.0", NULL, &mmcsd0_clk),
+	CLK("davinci_mmc.1", NULL, &mmcsd1_clk),
+	CLK("spi_davinci.0", NULL, &spi0_clk),
+	CLK("spi_davinci.1", NULL, &spi1_clk),
+	CLK("spi_davinci.2", NULL, &spi2_clk),
+	CLK("spi_davinci.3", NULL, &spi3_clk),
+	CLK("spi_davinci.4", NULL, &spi4_clk),
+	CLK(NULL, "gpio", &gpio_clk),
+	CLK(NULL, "aemif", &aemif_clk),
+	CLK(NULL, "pwm0", &pwm0_clk),
+	CLK(NULL, "pwm1", &pwm1_clk),
+	CLK(NULL, "pwm2", &pwm2_clk),
+	CLK(NULL, "pwm3", &pwm3_clk),
+	CLK(NULL, "timer0", &timer0_clk),
+	CLK(NULL, "timer1", &timer1_clk),
+	CLK("watchdog", NULL, &timer2_clk),
+	CLK(NULL, "timer3", &timer3_clk),
+	CLK(NULL, "usb", &usb_clk),
+	CLK("davinci_emac.1", NULL, &emac_clk),
+	CLK("voice_codec", NULL, &voicecodec_clk),
+	CLK("soc-audio.0", NULL, &asp0_clk),
+	CLK(NULL, "rto", &rto_clk),
+	CLK(NULL, "mjcp", &mjcp_clk),
+	CLK(NULL, NULL, NULL),
+};
+
+/*----------------------------------------------------------------------*/
+
+#define PINMUX0		0x00
+#define PINMUX1		0x04
+#define PINMUX2		0x08
+#define PINMUX3		0x0c
+#define PINMUX4		0x10
+#define INTMUX		0x18
+#define EVTMUX		0x1c
+
+
+static const struct mux_config dm365_pins[] = {
+#ifdef CONFIG_DAVINCI_MUX
+MUX_CFG(DM365,	MMCSD0,		0,   24,     1,	  0,	 false)
+
+MUX_CFG(DM365,	SD1_CLK,	0,   16,    3,	  1,	 false)
+MUX_CFG(DM365,	SD1_CMD,	4,   30,    3,	  1,	 false)
+MUX_CFG(DM365,	SD1_DATA3,	4,   28,    3,	  1,	 false)
+MUX_CFG(DM365,	SD1_DATA2,	4,   26,    3,	  1,	 false)
+MUX_CFG(DM365,	SD1_DATA1,	4,   24,    3,	  1,	 false)
+MUX_CFG(DM365,	SD1_DATA0,	4,   22,    3,	  1,	 false)
+
+MUX_CFG(DM365,	I2C_SDA,	3,   23,    3,	  2,	 false)
+MUX_CFG(DM365,	I2C_SCL,	3,   21,    3,	  2,	 false)
+
+MUX_CFG(DM365,	AEMIF_AR,	2,   0,     3,	  1,	 false)
+MUX_CFG(DM365,	AEMIF_A3,	2,   2,     3,	  1,	 false)
+MUX_CFG(DM365,	AEMIF_A7,	2,   4,     3,	  1,	 false)
+MUX_CFG(DM365,	AEMIF_D15_8,	2,   6,     1,	  1,	 false)
+MUX_CFG(DM365,	AEMIF_CE0,	2,   7,     1,	  0,	 false)
+
+MUX_CFG(DM365,	MCBSP0_BDX,	0,   23,    1,	  1,	 false)
+MUX_CFG(DM365,	MCBSP0_X,	0,   22,    1,	  1,	 false)
+MUX_CFG(DM365,	MCBSP0_BFSX,	0,   21,    1,	  1,	 false)
+MUX_CFG(DM365,	MCBSP0_BDR,	0,   20,    1,	  1,	 false)
+MUX_CFG(DM365,	MCBSP0_R,	0,   19,    1,	  1,	 false)
+MUX_CFG(DM365,	MCBSP0_BFSR,	0,   18,    1,	  1,	 false)
+
+MUX_CFG(DM365,	SPI0_SCLK,	3,   28,    1,    1,	 false)
+MUX_CFG(DM365,	SPI0_SDI,	3,   26,    3,    1,	 false)
+MUX_CFG(DM365,	SPI0_SDO,	3,   25,    1,    1,	 false)
+MUX_CFG(DM365,	SPI0_SDENA0,	3,   29,    3,    1,	 false)
+MUX_CFG(DM365,	SPI0_SDENA1,	3,   26,    3,    2,	 false)
+
+MUX_CFG(DM365,	UART0_RXD,	3,   20,    1,    1,	 false)
+MUX_CFG(DM365,	UART0_TXD,	3,   19,    1,    1,	 false)
+MUX_CFG(DM365,	UART1_RXD,	3,   17,    3,    2,	 false)
+MUX_CFG(DM365,	UART1_TXD,	3,   15,    3,    2,	 false)
+MUX_CFG(DM365,	UART1_RTS,	3,   23,    3,    1,	 false)
+MUX_CFG(DM365,	UART1_CTS,	3,   21,    3,    1,	 false)
+
+MUX_CFG(DM365,  EMAC_TX_EN,	3,   17,    3,    1,     false)
+MUX_CFG(DM365,  EMAC_TX_CLK,	3,   15,    3,    1,     false)
+MUX_CFG(DM365,  EMAC_COL,	3,   14,    1,    1,     false)
+MUX_CFG(DM365,  EMAC_TXD3,	3,   13,    1,    1,     false)
+MUX_CFG(DM365,  EMAC_TXD2,	3,   12,    1,    1,     false)
+MUX_CFG(DM365,  EMAC_TXD1,	3,   11,    1,    1,     false)
+MUX_CFG(DM365,  EMAC_TXD0,	3,   10,    1,    1,     false)
+MUX_CFG(DM365,  EMAC_RXD3,	3,   9,     1,    1,     false)
+MUX_CFG(DM365,  EMAC_RXD2,	3,   8,     1,    1,     false)
+MUX_CFG(DM365,  EMAC_RXD1,	3,   7,     1,    1,     false)
+MUX_CFG(DM365,  EMAC_RXD0,	3,   6,     1,    1,     false)
+MUX_CFG(DM365,  EMAC_RX_CLK,	3,   5,     1,    1,     false)
+MUX_CFG(DM365,  EMAC_RX_DV,	3,   4,     1,    1,     false)
+MUX_CFG(DM365,  EMAC_RX_ER,	3,   3,     1,    1,     false)
+MUX_CFG(DM365,  EMAC_CRS,	3,   2,     1,    1,     false)
+MUX_CFG(DM365,  EMAC_MDIO,	3,   1,     1,    1,     false)
+MUX_CFG(DM365,  EMAC_MDCLK,	3,   0,     1,    1,     false)
+
+MUX_CFG(DM365,	KEYPAD,		2,   0,     0x3f, 0x3f,  false)
+
+MUX_CFG(DM365,	PWM0,		1,   0,     3,    2,     false)
+MUX_CFG(DM365,	PWM0_G23,	3,   26,    3,    3,     false)
+MUX_CFG(DM365,	PWM1,		1,   2,     3,    2,     false)
+MUX_CFG(DM365,	PWM1_G25,	3,   29,    3,    2,     false)
+MUX_CFG(DM365,	PWM2_G87,	1,   10,    3,    2,     false)
+MUX_CFG(DM365,	PWM2_G88,	1,   8,     3,    2,     false)
+MUX_CFG(DM365,	PWM2_G89,	1,   6,     3,    2,     false)
+MUX_CFG(DM365,	PWM2_G90,	1,   4,     3,    2,     false)
+MUX_CFG(DM365,	PWM3_G80,	1,   20,    3,    3,     false)
+MUX_CFG(DM365,	PWM3_G81,	1,   18,    3,    3,     false)
+MUX_CFG(DM365,	PWM3_G85,	1,   14,    3,    2,     false)
+MUX_CFG(DM365,	PWM3_G86,	1,   12,    3,    2,     false)
+
+MUX_CFG(DM365,	SPI1_SCLK,	4,   2,     3,    1,	 false)
+MUX_CFG(DM365,	SPI1_SDI,	3,   31,    1,    1,	 false)
+MUX_CFG(DM365,	SPI1_SDO,	4,   0,     3,    1,	 false)
+MUX_CFG(DM365,	SPI1_SDENA0,	4,   4,     3,    1,	 false)
+MUX_CFG(DM365,	SPI1_SDENA1,	4,   0,     3,    2,	 false)
+
+MUX_CFG(DM365,	SPI2_SCLK,	4,   10,    3,    1,	 false)
+MUX_CFG(DM365,	SPI2_SDI,	4,   6,     3,    1,	 false)
+MUX_CFG(DM365,	SPI2_SDO,	4,   8,     3,    1,	 false)
+MUX_CFG(DM365,	SPI2_SDENA0,	4,   12,    3,    1,	 false)
+MUX_CFG(DM365,	SPI2_SDENA1,	4,   8,     3,    2,	 false)
+
+MUX_CFG(DM365,	SPI3_SCLK,	0,   0,	    3,    2,	 false)
+MUX_CFG(DM365,	SPI3_SDI,	0,   2,     3,    2,	 false)
+MUX_CFG(DM365,	SPI3_SDO,	0,   6,     3,    2,	 false)
+MUX_CFG(DM365,	SPI3_SDENA0,	0,   4,     3,    2,	 false)
+MUX_CFG(DM365,	SPI3_SDENA1,	0,   6,     3,    3,	 false)
+
+MUX_CFG(DM365,	SPI4_SCLK,	4,   18,    3,    1,	 false)
+MUX_CFG(DM365,	SPI4_SDI,	4,   14,    3,    1,	 false)
+MUX_CFG(DM365,	SPI4_SDO,	4,   16,    3,    1,	 false)
+MUX_CFG(DM365,	SPI4_SDENA0,	4,   20,    3,    1,	 false)
+MUX_CFG(DM365,	SPI4_SDENA1,	4,   16,    3,    2,	 false)
+
+MUX_CFG(DM365,	GPIO20,		3,   21,    3,    0,	 false)
+MUX_CFG(DM365,	GPIO33,		4,   12,    3,	  0,	 false)
+MUX_CFG(DM365,	GPIO40,		4,   26,    3,	  0,	 false)
+
+MUX_CFG(DM365,	VOUT_FIELD,	1,   18,    3,	  1,	 false)
+MUX_CFG(DM365,	VOUT_FIELD_G81,	1,   18,    3,	  0,	 false)
+MUX_CFG(DM365,	VOUT_HVSYNC,	1,   16,    1,	  0,	 false)
+MUX_CFG(DM365,	VOUT_COUTL_EN,	1,   0,     0xff, 0x55,  false)
+MUX_CFG(DM365,	VOUT_COUTH_EN,	1,   8,     0xff, 0x55,  false)
+MUX_CFG(DM365,	VIN_CAM_WEN,	0,   14,    3,	  0,	 false)
+MUX_CFG(DM365,	VIN_CAM_VD,	0,   13,    1,	  0,	 false)
+MUX_CFG(DM365,	VIN_CAM_HD,	0,   12,    1,	  0,	 false)
+MUX_CFG(DM365,	VIN_YIN4_7_EN,	0,   0,     0xff, 0,	 false)
+MUX_CFG(DM365,	VIN_YIN0_3_EN,	0,   8,     0xf,  0,	 false)
+
+INT_CFG(DM365,  INT_EDMA_CC,         2,     1,    1,     false)
+INT_CFG(DM365,  INT_EDMA_TC0_ERR,    3,     1,    1,     false)
+INT_CFG(DM365,  INT_EDMA_TC1_ERR,    4,     1,    1,     false)
+INT_CFG(DM365,  INT_EDMA_TC2_ERR,    22,    1,    1,     false)
+INT_CFG(DM365,  INT_EDMA_TC3_ERR,    23,    1,    1,     false)
+INT_CFG(DM365,  INT_PRTCSS,          10,    1,    1,     false)
+INT_CFG(DM365,  INT_EMAC_RXTHRESH,   14,    1,    1,     false)
+INT_CFG(DM365,  INT_EMAC_RXPULSE,    15,    1,    1,     false)
+INT_CFG(DM365,  INT_EMAC_TXPULSE,    16,    1,    1,     false)
+INT_CFG(DM365,  INT_EMAC_MISCPULSE,  17,    1,    1,     false)
+INT_CFG(DM365,  INT_IMX0_ENABLE,     0,     1,    0,     false)
+INT_CFG(DM365,  INT_IMX0_DISABLE,    0,     1,    1,     false)
+INT_CFG(DM365,  INT_HDVICP_ENABLE,   0,     1,    1,     false)
+INT_CFG(DM365,  INT_HDVICP_DISABLE,  0,     1,    0,     false)
+INT_CFG(DM365,  INT_IMX1_ENABLE,     24,    1,    1,     false)
+INT_CFG(DM365,  INT_IMX1_DISABLE,    24,    1,    0,     false)
+INT_CFG(DM365,  INT_NSF_ENABLE,      25,    1,    1,     false)
+INT_CFG(DM365,  INT_NSF_DISABLE,     25,    1,    0,     false)
+#endif
+};
+
+static struct emac_platform_data dm365_emac_pdata = {
+	.ctrl_reg_offset	= DM365_EMAC_CNTRL_OFFSET,
+	.ctrl_mod_reg_offset	= DM365_EMAC_CNTRL_MOD_OFFSET,
+	.ctrl_ram_offset	= DM365_EMAC_CNTRL_RAM_OFFSET,
+	.mdio_reg_offset	= DM365_EMAC_MDIO_OFFSET,
+	.ctrl_ram_size		= DM365_EMAC_CNTRL_RAM_SIZE,
+	.version		= EMAC_VERSION_2,
+};
+
+static struct resource dm365_emac_resources[] = {
+	{
+		.start	= DM365_EMAC_BASE,
+		.end	= DM365_EMAC_BASE + 0x47ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_DM365_EMAC_RXTHRESH,
+		.end	= IRQ_DM365_EMAC_RXTHRESH,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_EMAC_RXPULSE,
+		.end	= IRQ_DM365_EMAC_RXPULSE,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_EMAC_TXPULSE,
+		.end	= IRQ_DM365_EMAC_TXPULSE,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_EMAC_MISCPULSE,
+		.end	= IRQ_DM365_EMAC_MISCPULSE,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dm365_emac_device = {
+	.name		= "davinci_emac",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &dm365_emac_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(dm365_emac_resources),
+	.resource	= dm365_emac_resources,
+};
+
+static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = {
+	[IRQ_VDINT0]			= 2,
+	[IRQ_VDINT1]			= 6,
+	[IRQ_VDINT2]			= 6,
+	[IRQ_HISTINT]			= 6,
+	[IRQ_H3AINT]			= 6,
+	[IRQ_PRVUINT]			= 6,
+	[IRQ_RSZINT]			= 6,
+	[IRQ_DM365_INSFINT]		= 7,
+	[IRQ_VENCINT]			= 6,
+	[IRQ_ASQINT]			= 6,
+	[IRQ_IMXINT]			= 6,
+	[IRQ_DM365_IMCOPINT]		= 4,
+	[IRQ_USBINT]			= 4,
+	[IRQ_DM365_RTOINT]		= 7,
+	[IRQ_DM365_TINT5]		= 7,
+	[IRQ_DM365_TINT6]		= 5,
+	[IRQ_CCINT0]			= 5,
+	[IRQ_CCERRINT]			= 5,
+	[IRQ_TCERRINT0]			= 5,
+	[IRQ_TCERRINT]			= 7,
+	[IRQ_PSCIN]			= 4,
+	[IRQ_DM365_SPINT2_1]		= 7,
+	[IRQ_DM365_TINT7]		= 7,
+	[IRQ_DM365_SDIOINT0]		= 7,
+	[IRQ_MBXINT]			= 7,
+	[IRQ_MBRINT]			= 7,
+	[IRQ_MMCINT]			= 7,
+	[IRQ_DM365_MMCINT1]		= 7,
+	[IRQ_DM365_PWMINT3]		= 7,
+	[IRQ_DDRINT]			= 4,
+	[IRQ_AEMIFINT]			= 2,
+	[IRQ_DM365_SDIOINT1]		= 2,
+	[IRQ_TINT0_TINT12]		= 7,
+	[IRQ_TINT0_TINT34]		= 7,
+	[IRQ_TINT1_TINT12]		= 7,
+	[IRQ_TINT1_TINT34]		= 7,
+	[IRQ_PWMINT0]			= 7,
+	[IRQ_PWMINT1]			= 3,
+	[IRQ_PWMINT2]			= 3,
+	[IRQ_I2C]			= 3,
+	[IRQ_UARTINT0]			= 3,
+	[IRQ_UARTINT1]			= 3,
+	[IRQ_DM365_SPIINT0_0]		= 3,
+	[IRQ_DM365_SPIINT3_0]		= 3,
+	[IRQ_DM365_GPIO0]		= 3,
+	[IRQ_DM365_GPIO1]		= 7,
+	[IRQ_DM365_GPIO2]		= 4,
+	[IRQ_DM365_GPIO3]		= 4,
+	[IRQ_DM365_GPIO4]		= 7,
+	[IRQ_DM365_GPIO5]		= 7,
+	[IRQ_DM365_GPIO6]		= 7,
+	[IRQ_DM365_GPIO7]		= 7,
+	[IRQ_DM365_EMAC_RXTHRESH]	= 7,
+	[IRQ_DM365_EMAC_RXPULSE]	= 7,
+	[IRQ_DM365_EMAC_TXPULSE]	= 7,
+	[IRQ_DM365_EMAC_MISCPULSE]	= 7,
+	[IRQ_DM365_GPIO12]		= 7,
+	[IRQ_DM365_GPIO13]		= 7,
+	[IRQ_DM365_GPIO14]		= 7,
+	[IRQ_DM365_GPIO15]		= 7,
+	[IRQ_DM365_KEYINT]		= 7,
+	[IRQ_DM365_TCERRINT2]		= 7,
+	[IRQ_DM365_TCERRINT3]		= 7,
+	[IRQ_DM365_EMUINT]		= 7,
+};
+
+/* Four Transfer Controllers on DM365 */
+static const s8
+dm365_queue_tc_mapping[][2] = {
+	/* {event queue no, TC no} */
+	{0, 0},
+	{1, 1},
+	{2, 2},
+	{3, 3},
+	{-1, -1},
+};
+
+static const s8
+dm365_queue_priority_mapping[][2] = {
+	/* {event queue no, Priority} */
+	{0, 7},
+	{1, 7},
+	{2, 7},
+	{3, 0},
+	{-1, -1},
+};
+
+static struct edma_soc_info dm365_edma_info[] = {
+	{
+		.n_channel		= 64,
+		.n_region		= 4,
+		.n_slot			= 256,
+		.n_tc			= 4,
+		.n_cc			= 1,
+		.queue_tc_mapping	= dm365_queue_tc_mapping,
+		.queue_priority_mapping	= dm365_queue_priority_mapping,
+		.default_queue		= EVENTQ_2,
+	},
+};
+
+static struct resource edma_resources[] = {
+	{
+		.name	= "edma_cc0",
+		.start	= 0x01c00000,
+		.end	= 0x01c00000 + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc0",
+		.start	= 0x01c10000,
+		.end	= 0x01c10000 + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc1",
+		.start	= 0x01c10400,
+		.end	= 0x01c10400 + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc2",
+		.start	= 0x01c10800,
+		.end	= 0x01c10800 + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc3",
+		.start	= 0x01c10c00,
+		.end	= 0x01c10c00 + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma0",
+		.start	= IRQ_CCINT0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.name	= "edma0_err",
+		.start	= IRQ_CCERRINT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	/* not using TC*_ERR */
+};
+
+static struct platform_device dm365_edma_device = {
+	.name			= "edma",
+	.id			= 0,
+	.dev.platform_data	= dm365_edma_info,
+	.num_resources		= ARRAY_SIZE(edma_resources),
+	.resource		= edma_resources,
+};
+
+static struct map_desc dm365_io_desc[] = {
+	{
+		.virtual	= IO_VIRT,
+		.pfn		= __phys_to_pfn(IO_PHYS),
+		.length		= IO_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= SRAM_VIRT,
+		.pfn		= __phys_to_pfn(0x00010000),
+		.length		= SZ_32K,
+		/* MT_MEMORY_NONCACHED requires supersection alignment */
+		.type		= MT_DEVICE,
+	},
+};
+
+/* Contents of JTAG ID register used to identify exact cpu type */
+static struct davinci_id dm365_ids[] = {
+	{
+		.variant	= 0x0,
+		.part_no	= 0xb83e,
+		.manufacturer	= 0x017,
+		.cpu_id		= DAVINCI_CPU_ID_DM365,
+		.name		= "dm365_rev1.1",
+	},
+	{
+		.variant	= 0x8,
+		.part_no	= 0xb83e,
+		.manufacturer	= 0x017,
+		.cpu_id		= DAVINCI_CPU_ID_DM365,
+		.name		= "dm365_rev1.2",
+	},
+};
+
+static void __iomem *dm365_psc_bases[] = {
+	IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE),
+};
+
+struct davinci_timer_info dm365_timer_info = {
+	.timers		= davinci_timer_instance,
+	.clockevent_id	= T0_BOT,
+	.clocksource_id	= T0_TOP,
+};
+
+static struct plat_serial8250_port dm365_serial_platform_data[] = {
+	{
+		.mapbase	= DAVINCI_UART0_BASE,
+		.irq		= IRQ_UARTINT0,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+	},
+	{
+		.mapbase	= DAVINCI_UART1_BASE,
+		.irq		= IRQ_UARTINT1,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+	},
+	{
+		.flags		= 0
+	},
+};
+
+static struct platform_device dm365_serial_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= dm365_serial_platform_data,
+	},
+};
+
+static struct davinci_soc_info davinci_soc_info_dm365 = {
+	.io_desc		= dm365_io_desc,
+	.io_desc_num		= ARRAY_SIZE(dm365_io_desc),
+	.jtag_id_base		= IO_ADDRESS(0x01c40028),
+	.ids			= dm365_ids,
+	.ids_num		= ARRAY_SIZE(dm365_ids),
+	.cpu_clks		= dm365_clks,
+	.psc_bases		= dm365_psc_bases,
+	.psc_bases_num		= ARRAY_SIZE(dm365_psc_bases),
+	.pinmux_base		= IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE),
+	.pinmux_pins		= dm365_pins,
+	.pinmux_pins_num	= ARRAY_SIZE(dm365_pins),
+	.intc_base		= IO_ADDRESS(DAVINCI_ARM_INTC_BASE),
+	.intc_type		= DAVINCI_INTC_TYPE_AINTC,
+	.intc_irq_prios		= dm365_default_priorities,
+	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
+	.timer_info		= &dm365_timer_info,
+	.gpio_base		= IO_ADDRESS(DAVINCI_GPIO_BASE),
+	.gpio_num		= 104,
+	.gpio_irq		= IRQ_DM365_GPIO0,
+	.gpio_unbanked		= 8,	/* really 16 ... skip muxed GPIOs */
+	.serial_dev		= &dm365_serial_device,
+	.emac_pdata		= &dm365_emac_pdata,
+	.sram_dma		= 0x00010000,
+	.sram_len		= SZ_32K,
+};
+
+void __init dm365_init(void)
+{
+	davinci_common_init(&davinci_soc_info_dm365);
+}
+
+static int __init dm365_init_devices(void)
+{
+	if (!cpu_is_davinci_dm365())
+		return 0;
+
+	davinci_cfg_reg(DM365_INT_EDMA_CC);
+	platform_device_register(&dm365_edma_device);
+	platform_device_register(&dm365_emac_device);
+
+	return 0;
+}
+postcore_initcall(dm365_init_devices);

arch/arm/mach-davinci/dm644x.c

@@ -27,6 +27,7 @@
 #include <mach/time.h>
 #include <mach/serial.h>
 #include <mach/common.h>
+#include <mach/asp.h>
 
 #include "clock.h"
 #include "mux.h"
@@ -303,7 +304,7 @@ struct davinci_clk dm644x_clks[] = {
 	CLK("davinci_emac.1", NULL, &emac_clk),
 	CLK("i2c_davinci.1", NULL, &i2c_clk),
 	CLK("palm_bk3710", NULL, &ide_clk),
-	CLK("soc-audio.0", NULL, &asp_clk),
+	CLK("davinci-asp", NULL, &asp_clk),
 	CLK("davinci_mmc.0", NULL, &mmcsd_clk),
 	CLK(NULL, "spi", &spi_clk),
 	CLK(NULL, "gpio", &gpio_clk),
@@ -484,17 +485,38 @@ static const s8 dma_chan_dm644x_no_event[] = {
 	-1
 };
 
-static struct edma_soc_info dm644x_edma_info = {
-	.n_channel	= 64,
-	.n_region	= 4,
-	.n_slot		= 128,
-	.n_tc		= 2,
-	.noevent	= dma_chan_dm644x_no_event,
+static const s8
+queue_tc_mapping[][2] = {
+	/* {event queue no, TC no} */
+	{0, 0},
+	{1, 1},
+	{-1, -1},
+};
+
+static const s8
+queue_priority_mapping[][2] = {
+	/* {event queue no, Priority} */
+	{0, 3},
+	{1, 7},
+	{-1, -1},
+};
+
+static struct edma_soc_info dm644x_edma_info[] = {
+	{
+		.n_channel		= 64,
+		.n_region		= 4,
+		.n_slot			= 128,
+		.n_tc			= 2,
+		.n_cc			= 1,
+		.noevent		= dma_chan_dm644x_no_event,
+		.queue_tc_mapping	= queue_tc_mapping,
+		.queue_priority_mapping	= queue_priority_mapping,
+	},
 };
 
 static struct resource edma_resources[] = {
 	{
-		.name	= "edma_cc",
+		.name	= "edma_cc0",
 		.start	= 0x01c00000,
 		.end	= 0x01c00000 + SZ_64K - 1,
 		.flags	= IORESOURCE_MEM,
@@ -512,10 +534,12 @@ static struct resource edma_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	{
+		.name	= "edma0",
 		.start	= IRQ_CCINT0,
 		.flags	= IORESOURCE_IRQ,
 	},
 	{
+		.name	= "edma0_err",
 		.start	= IRQ_CCERRINT,
 		.flags	= IORESOURCE_IRQ,
 	},
@@ -524,12 +548,91 @@ static struct resource edma_resources[] = {
 
 static struct platform_device dm644x_edma_device = {
 	.name			= "edma",
-	.id			= -1,
-	.dev.platform_data	= &dm644x_edma_info,
+	.id			= 0,
+	.dev.platform_data	= dm644x_edma_info,
 	.num_resources		= ARRAY_SIZE(edma_resources),
 	.resource		= edma_resources,
 };
 
+/* DM6446 EVM uses ASP0; line-out is a pair of RCA jacks */
+static struct resource dm644x_asp_resources[] = {
+	{
+		.start	= DAVINCI_ASP0_BASE,
+		.end	= DAVINCI_ASP0_BASE + SZ_8K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= DAVINCI_DMA_ASP0_TX,
+		.end	= DAVINCI_DMA_ASP0_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	{
+		.start	= DAVINCI_DMA_ASP0_RX,
+		.end	= DAVINCI_DMA_ASP0_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device dm644x_asp_device = {
+	.name		= "davinci-asp",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(dm644x_asp_resources),
+	.resource	= dm644x_asp_resources,
+};
+
+static struct resource dm644x_vpss_resources[] = {
+	{
+		/* VPSS Base address */
+		.name		= "vpss",
+		.start          = 0x01c73400,
+		.end            = 0x01c73400 + 0xff,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device dm644x_vpss_device = {
+	.name			= "vpss",
+	.id			= -1,
+	.dev.platform_data	= "dm644x_vpss",
+	.num_resources		= ARRAY_SIZE(dm644x_vpss_resources),
+	.resource		= dm644x_vpss_resources,
+};
+
+static struct resource vpfe_resources[] = {
+	{
+		.start          = IRQ_VDINT0,
+		.end            = IRQ_VDINT0,
+		.flags          = IORESOURCE_IRQ,
+	},
+	{
+		.start          = IRQ_VDINT1,
+		.end            = IRQ_VDINT1,
+		.flags          = IORESOURCE_IRQ,
+	},
+	{
+		.start          = 0x01c70400,
+		.end            = 0x01c70400 + 0xff,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
+static struct platform_device vpfe_capture_dev = {
+	.name		= CAPTURE_DRV_NAME,
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(vpfe_resources),
+	.resource	= vpfe_resources,
+	.dev = {
+		.dma_mask		= &vpfe_capture_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+void dm644x_set_vpfe_config(struct vpfe_config *cfg)
+{
+	vpfe_capture_dev.dev.platform_data = cfg;
+}
+
 /*----------------------------------------------------------------------*/
 
 static struct map_desc dm644x_io_desc[] = {
@@ -557,6 +660,13 @@ static struct davinci_id dm644x_ids[] = {
 		.cpu_id		= DAVINCI_CPU_ID_DM6446,
 		.name		= "dm6446",
 	},
+	{
+		.variant	= 0x1,
+		.part_no	= 0xb700,
+		.manufacturer	= 0x017,
+		.cpu_id		= DAVINCI_CPU_ID_DM6446,
+		.name		= "dm6446a",
+	},
 };
 
 static void __iomem *dm644x_psc_bases[] = {
@@ -630,7 +740,6 @@ static struct davinci_soc_info davinci_soc_info_dm644x = {
 	.intc_irq_prios 	= dm644x_default_priorities,
 	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
 	.timer_info		= &dm644x_timer_info,
-	.wdt_base		= IO_ADDRESS(DAVINCI_WDOG_BASE),
 	.gpio_base		= IO_ADDRESS(DAVINCI_GPIO_BASE),
 	.gpio_num		= 71,
 	.gpio_irq		= IRQ_GPIOBNK0,
@@ -640,6 +749,13 @@ static struct davinci_soc_info davinci_soc_info_dm644x = {
 	.sram_len		= SZ_16K,
 };
 
+void __init dm644x_init_asp(struct snd_platform_data *pdata)
+{
+	davinci_cfg_reg(DM644X_MCBSP);
+	dm644x_asp_device.dev.platform_data = pdata;
+	platform_device_register(&dm644x_asp_device);
+}
+
 void __init dm644x_init(void)
 {
 	davinci_common_init(&davinci_soc_info_dm644x);
@@ -652,6 +768,9 @@ static int __init dm644x_init_devices(void)
 
 	platform_device_register(&dm644x_edma_device);
 	platform_device_register(&dm644x_emac_device);
+	platform_device_register(&dm644x_vpss_device);
+	platform_device_register(&vpfe_capture_dev);
+
 	return 0;
 }
 postcore_initcall(dm644x_init_devices);

arch/arm/mach-davinci/dm646x.c

@@ -27,10 +27,20 @@
 #include <mach/time.h>
 #include <mach/serial.h>
 #include <mach/common.h>
+#include <mach/asp.h>
 
 #include "clock.h"
 #include "mux.h"
 
+#define DAVINCI_VPIF_BASE       (0x01C12000)
+#define VDD3P3V_PWDN_OFFSET	(0x48)
+#define VSCLKDIS_OFFSET		(0x6C)
+
+#define VDD3P3V_VID_MASK	(BIT_MASK(3) | BIT_MASK(2) | BIT_MASK(1) |\
+					BIT_MASK(0))
+#define VSCLKDIS_MASK		(BIT_MASK(11) | BIT_MASK(10) | BIT_MASK(9) |\
+					BIT_MASK(8))
+
 /*
  * Device specific clocks
  */
@@ -162,6 +172,41 @@ static struct clk arm_clk = {
 	.flags = ALWAYS_ENABLED,
 };
 
+static struct clk edma_cc_clk = {
+	.name = "edma_cc",
+	.parent = &pll1_sysclk2,
+	.lpsc = DM646X_LPSC_TPCC,
+	.flags = ALWAYS_ENABLED,
+};
+
+static struct clk edma_tc0_clk = {
+	.name = "edma_tc0",
+	.parent = &pll1_sysclk2,
+	.lpsc = DM646X_LPSC_TPTC0,
+	.flags = ALWAYS_ENABLED,
+};
+
+static struct clk edma_tc1_clk = {
+	.name = "edma_tc1",
+	.parent = &pll1_sysclk2,
+	.lpsc = DM646X_LPSC_TPTC1,
+	.flags = ALWAYS_ENABLED,
+};
+
+static struct clk edma_tc2_clk = {
+	.name = "edma_tc2",
+	.parent = &pll1_sysclk2,
+	.lpsc = DM646X_LPSC_TPTC2,
+	.flags = ALWAYS_ENABLED,
+};
+
+static struct clk edma_tc3_clk = {
+	.name = "edma_tc3",
+	.parent = &pll1_sysclk2,
+	.lpsc = DM646X_LPSC_TPTC3,
+	.flags = ALWAYS_ENABLED,
+};
+
 static struct clk uart0_clk = {
 	.name = "uart0",
 	.parent = &aux_clkin,
@@ -192,6 +237,18 @@ static struct clk gpio_clk = {
 	.lpsc = DM646X_LPSC_GPIO,
 };
 
+static struct clk mcasp0_clk = {
+	.name = "mcasp0",
+	.parent = &pll1_sysclk3,
+	.lpsc = DM646X_LPSC_McASP0,
+};
+
+static struct clk mcasp1_clk = {
+	.name = "mcasp1",
+	.parent = &pll1_sysclk3,
+	.lpsc = DM646X_LPSC_McASP1,
+};
+
 static struct clk aemif_clk = {
 	.name = "aemif",
 	.parent = &pll1_sysclk3,
@@ -237,6 +294,13 @@ static struct clk timer2_clk = {
 	.flags = ALWAYS_ENABLED, /* no LPSC, always enabled; c.f. spruep9a */
 };
 
+
+static struct clk ide_clk = {
+	.name = "ide",
+	.parent = &pll1_sysclk4,
+	.lpsc = DAVINCI_LPSC_ATA,
+};
+
 static struct clk vpif0_clk = {
 	.name = "vpif0",
 	.parent = &ref_clk,
@@ -269,11 +333,18 @@ struct davinci_clk dm646x_clks[] = {
 	CLK(NULL, "pll2_sysclk1", &pll2_sysclk1),
 	CLK(NULL, "dsp", &dsp_clk),
 	CLK(NULL, "arm", &arm_clk),
+	CLK(NULL, "edma_cc", &edma_cc_clk),
+	CLK(NULL, "edma_tc0", &edma_tc0_clk),
+	CLK(NULL, "edma_tc1", &edma_tc1_clk),
+	CLK(NULL, "edma_tc2", &edma_tc2_clk),
+	CLK(NULL, "edma_tc3", &edma_tc3_clk),
 	CLK(NULL, "uart0", &uart0_clk),
 	CLK(NULL, "uart1", &uart1_clk),
 	CLK(NULL, "uart2", &uart2_clk),
 	CLK("i2c_davinci.1", NULL, &i2c_clk),
 	CLK(NULL, "gpio", &gpio_clk),
+	CLK("davinci-mcasp.0", NULL, &mcasp0_clk),
+	CLK("davinci-mcasp.1", NULL, &mcasp1_clk),
 	CLK(NULL, "aemif", &aemif_clk),
 	CLK("davinci_emac.1", NULL, &emac_clk),
 	CLK(NULL, "pwm0", &pwm0_clk),
@@ -281,6 +352,7 @@ struct davinci_clk dm646x_clks[] = {
 	CLK(NULL, "timer0", &timer0_clk),
 	CLK(NULL, "timer1", &timer1_clk),
 	CLK("watchdog", NULL, &timer2_clk),
+	CLK("palm_bk3710", NULL, &ide_clk),
 	CLK(NULL, "vpif0", &vpif0_clk),
 	CLK(NULL, "vpif1", &vpif1_clk),
 	CLK(NULL, NULL, NULL),
@@ -344,7 +416,7 @@ static struct platform_device dm646x_emac_device = {
  */
 static const struct mux_config dm646x_pins[] = {
 #ifdef CONFIG_DAVINCI_MUX
-MUX_CFG(DM646X, ATAEN,		0,   0,     1,	  1,	 true)
+MUX_CFG(DM646X, ATAEN,		0,   0,     5,	  1,	 true)
 
 MUX_CFG(DM646X, AUDCK1,		0,   29,    1,	  0,	 false)
 
@@ -451,17 +523,43 @@ static const s8 dma_chan_dm646x_no_event[] = {
 	-1
 };
 
-static struct edma_soc_info dm646x_edma_info = {
-	.n_channel	= 64,
-	.n_region	= 6,	/* 0-1, 4-7 */
-	.n_slot		= 512,
-	.n_tc		= 4,
-	.noevent	= dma_chan_dm646x_no_event,
+/* Four Transfer Controllers on DM646x */
+static const s8
+dm646x_queue_tc_mapping[][2] = {
+	/* {event queue no, TC no} */
+	{0, 0},
+	{1, 1},
+	{2, 2},
+	{3, 3},
+	{-1, -1},
+};
+
+static const s8
+dm646x_queue_priority_mapping[][2] = {
+	/* {event queue no, Priority} */
+	{0, 4},
+	{1, 0},
+	{2, 5},
+	{3, 1},
+	{-1, -1},
+};
+
+static struct edma_soc_info dm646x_edma_info[] = {
+	{
+		.n_channel		= 64,
+		.n_region		= 6,	/* 0-1, 4-7 */
+		.n_slot			= 512,
+		.n_tc			= 4,
+		.n_cc			= 1,
+		.noevent		= dma_chan_dm646x_no_event,
+		.queue_tc_mapping	= dm646x_queue_tc_mapping,
+		.queue_priority_mapping	= dm646x_queue_priority_mapping,
+	},
 };
 
 static struct resource edma_resources[] = {
 	{
-		.name	= "edma_cc",
+		.name	= "edma_cc0",
 		.start	= 0x01c00000,
 		.end	= 0x01c00000 + SZ_64K - 1,
 		.flags	= IORESOURCE_MEM,
@@ -491,10 +589,12 @@ static struct resource edma_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	{
+		.name	= "edma0",
 		.start	= IRQ_CCINT0,
 		.flags	= IORESOURCE_IRQ,
 	},
 	{
+		.name	= "edma0_err",
 		.start	= IRQ_CCERRINT,
 		.flags	= IORESOURCE_IRQ,
 	},
@@ -503,12 +603,167 @@ static struct resource edma_resources[] = {
 
 static struct platform_device dm646x_edma_device = {
 	.name			= "edma",
-	.id			= -1,
-	.dev.platform_data	= &dm646x_edma_info,
+	.id			= 0,
+	.dev.platform_data	= dm646x_edma_info,
 	.num_resources		= ARRAY_SIZE(edma_resources),
 	.resource		= edma_resources,
 };
 
+static struct resource ide_resources[] = {
+	{
+		.start          = DM646X_ATA_REG_BASE,
+		.end            = DM646X_ATA_REG_BASE + 0x7ff,
+		.flags          = IORESOURCE_MEM,
+	},
+	{
+		.start          = IRQ_DM646X_IDE,
+		.end            = IRQ_DM646X_IDE,
+		.flags          = IORESOURCE_IRQ,
+	},
+};
+
+static u64 ide_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device ide_dev = {
+	.name           = "palm_bk3710",
+	.id             = -1,
+	.resource       = ide_resources,
+	.num_resources  = ARRAY_SIZE(ide_resources),
+	.dev = {
+		.dma_mask		= &ide_dma_mask,
+		.coherent_dma_mask      = DMA_BIT_MASK(32),
+	},
+};
+
+static struct resource dm646x_mcasp0_resources[] = {
+	{
+		.name	= "mcasp0",
+		.start 	= DAVINCI_DM646X_MCASP0_REG_BASE,
+		.end 	= DAVINCI_DM646X_MCASP0_REG_BASE + (SZ_1K << 1) - 1,
+		.flags 	= IORESOURCE_MEM,
+	},
+	/* first TX, then RX */
+	{
+		.start	= DAVINCI_DM646X_DMA_MCASP0_AXEVT0,
+		.end	= DAVINCI_DM646X_DMA_MCASP0_AXEVT0,
+		.flags	= IORESOURCE_DMA,
+	},
+	{
+		.start	= DAVINCI_DM646X_DMA_MCASP0_AREVT0,
+		.end	= DAVINCI_DM646X_DMA_MCASP0_AREVT0,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct resource dm646x_mcasp1_resources[] = {
+	{
+		.name	= "mcasp1",
+		.start	= DAVINCI_DM646X_MCASP1_REG_BASE,
+		.end	= DAVINCI_DM646X_MCASP1_REG_BASE + (SZ_1K << 1) - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	/* DIT mode, only TX event */
+	{
+		.start	= DAVINCI_DM646X_DMA_MCASP1_AXEVT1,
+		.end	= DAVINCI_DM646X_DMA_MCASP1_AXEVT1,
+		.flags	= IORESOURCE_DMA,
+	},
+	/* DIT mode, dummy entry */
+	{
+		.start	= -1,
+		.end	= -1,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device dm646x_mcasp0_device = {
+	.name		= "davinci-mcasp",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(dm646x_mcasp0_resources),
+	.resource	= dm646x_mcasp0_resources,
+};
+
+static struct platform_device dm646x_mcasp1_device = {
+	.name		= "davinci-mcasp",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(dm646x_mcasp1_resources),
+	.resource	= dm646x_mcasp1_resources,
+};
+
+static struct platform_device dm646x_dit_device = {
+	.name	= "spdif-dit",
+	.id	= -1,
+};
+
+static u64 vpif_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource vpif_resource[] = {
+	{
+		.start	= DAVINCI_VPIF_BASE,
+		.end	= DAVINCI_VPIF_BASE + 0x03ff,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device vpif_dev = {
+	.name		= "vpif",
+	.id		= -1,
+	.dev		= {
+			.dma_mask 		= &vpif_dma_mask,
+			.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= vpif_resource,
+	.num_resources	= ARRAY_SIZE(vpif_resource),
+};
+
+static struct resource vpif_display_resource[] = {
+	{
+		.start = IRQ_DM646X_VP_VERTINT2,
+		.end   = IRQ_DM646X_VP_VERTINT2,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_DM646X_VP_VERTINT3,
+		.end   = IRQ_DM646X_VP_VERTINT3,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device vpif_display_dev = {
+	.name		= "vpif_display",
+	.id		= -1,
+	.dev		= {
+			.dma_mask 		= &vpif_dma_mask,
+			.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= vpif_display_resource,
+	.num_resources	= ARRAY_SIZE(vpif_display_resource),
+};
+
+static struct resource vpif_capture_resource[] = {
+	{
+		.start = IRQ_DM646X_VP_VERTINT0,
+		.end   = IRQ_DM646X_VP_VERTINT0,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_DM646X_VP_VERTINT1,
+		.end   = IRQ_DM646X_VP_VERTINT1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device vpif_capture_dev = {
+	.name		= "vpif_capture",
+	.id		= -1,
+	.dev		= {
+			.dma_mask 		= &vpif_dma_mask,
+			.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= vpif_capture_resource,
+	.num_resources	= ARRAY_SIZE(vpif_capture_resource),
+};
+
 /*----------------------------------------------------------------------*/
 
 static struct map_desc dm646x_io_desc[] = {
@@ -609,7 +864,6 @@ static struct davinci_soc_info davinci_soc_info_dm646x = {
 	.intc_irq_prios		= dm646x_default_priorities,
 	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
 	.timer_info		= &dm646x_timer_info,
-	.wdt_base		= IO_ADDRESS(DAVINCI_WDOG_BASE),
 	.gpio_base		= IO_ADDRESS(DAVINCI_GPIO_BASE),
 	.gpio_num		= 43, /* Only 33 usable */
 	.gpio_irq		= IRQ_DM646X_GPIOBNK0,
@@ -619,6 +873,51 @@ static struct davinci_soc_info davinci_soc_info_dm646x = {
 	.sram_len		= SZ_32K,
 };
 
+void __init dm646x_init_ide()
+{
+	davinci_cfg_reg(DM646X_ATAEN);
+	platform_device_register(&ide_dev);
+}
+
+void __init dm646x_init_mcasp0(struct snd_platform_data *pdata)
+{
+	dm646x_mcasp0_device.dev.platform_data = pdata;
+	platform_device_register(&dm646x_mcasp0_device);
+}
+
+void __init dm646x_init_mcasp1(struct snd_platform_data *pdata)
+{
+	dm646x_mcasp1_device.dev.platform_data = pdata;
+	platform_device_register(&dm646x_mcasp1_device);
+	platform_device_register(&dm646x_dit_device);
+}
+
+void dm646x_setup_vpif(struct vpif_display_config *display_config,
+		       struct vpif_capture_config *capture_config)
+{
+	unsigned int value;
+	void __iomem *base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE);
+
+	value = __raw_readl(base + VSCLKDIS_OFFSET);
+	value &= ~VSCLKDIS_MASK;
+	__raw_writel(value, base + VSCLKDIS_OFFSET);
+
+	value = __raw_readl(base + VDD3P3V_PWDN_OFFSET);
+	value &= ~VDD3P3V_VID_MASK;
+	__raw_writel(value, base + VDD3P3V_PWDN_OFFSET);
+
+	davinci_cfg_reg(DM646X_STSOMUX_DISABLE);
+	davinci_cfg_reg(DM646X_STSIMUX_DISABLE);
+	davinci_cfg_reg(DM646X_PTSOMUX_DISABLE);
+	davinci_cfg_reg(DM646X_PTSIMUX_DISABLE);
+
+	vpif_display_dev.dev.platform_data = display_config;
+	vpif_capture_dev.dev.platform_data = capture_config;
+	platform_device_register(&vpif_dev);
+	platform_device_register(&vpif_display_dev);
+	platform_device_register(&vpif_capture_dev);
+}
+
 void __init dm646x_init(void)
 {
 	davinci_common_init(&davinci_soc_info_dm646x);

arch/arm/mach-davinci/gpio.c

@@ -34,6 +34,7 @@ static DEFINE_SPINLOCK(gpio_lock);
 struct davinci_gpio {
 	struct gpio_chip	chip;
 	struct gpio_controller	*__iomem regs;
+	int			irq_base;
 };
 
 static struct davinci_gpio chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)];
@@ -161,8 +162,7 @@ pure_initcall(davinci_gpio_setup);
  * used as output pins ... which is convenient for testing.
  *
  * NOTE:  The first few GPIOs also have direct INTC hookups in addition
- * to their GPIOBNK0 irq, with a bit less overhead but less flexibility
- * on triggering (e.g. no edge options).  We don't try to use those.
+ * to their GPIOBNK0 irq, with a bit less overhead.
  *
  * All those INTC hookups (direct, plus several IRQ banks) can also
  * serve as EDMA event triggers.
@@ -171,7 +171,7 @@ pure_initcall(davinci_gpio_setup);
 static void gpio_irq_disable(unsigned irq)
 {
 	struct gpio_controller *__iomem g = get_irq_chip_data(irq);
-	u32 mask = __gpio_mask(irq_to_gpio(irq));
+	u32 mask = (u32) get_irq_data(irq);
 
 	__raw_writel(mask, &g->clr_falling);
 	__raw_writel(mask, &g->clr_rising);
@@ -180,7 +180,7 @@ static void gpio_irq_disable(unsigned irq)
 static void gpio_irq_enable(unsigned irq)
 {
 	struct gpio_controller *__iomem g = get_irq_chip_data(irq);
-	u32 mask = __gpio_mask(irq_to_gpio(irq));
+	u32 mask = (u32) get_irq_data(irq);
 	unsigned status = irq_desc[irq].status;
 
 	status &= IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING;
@@ -196,7 +196,7 @@ static void gpio_irq_enable(unsigned irq)
 static int gpio_irq_type(unsigned irq, unsigned trigger)
 {
 	struct gpio_controller *__iomem g = get_irq_chip_data(irq);
-	u32 mask = __gpio_mask(irq_to_gpio(irq));
+	u32 mask = (u32) get_irq_data(irq);
 
 	if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
 		return -EINVAL;
@@ -260,6 +260,45 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 	/* now it may re-trigger */
 }
 
+static int gpio_to_irq_banked(struct gpio_chip *chip, unsigned offset)
+{
+	struct davinci_gpio *d = container_of(chip, struct davinci_gpio, chip);
+
+	if (d->irq_base >= 0)
+		return d->irq_base + offset;
+	else
+		return -ENODEV;
+}
+
+static int gpio_to_irq_unbanked(struct gpio_chip *chip, unsigned offset)
+{
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+	/* NOTE:  we assume for now that only irqs in the first gpio_chip
+	 * can provide direct-mapped IRQs to AINTC (up to 32 GPIOs).
+	 */
+	if (offset < soc_info->gpio_unbanked)
+		return soc_info->gpio_irq + offset;
+	else
+		return -ENODEV;
+}
+
+static int gpio_irq_type_unbanked(unsigned irq, unsigned trigger)
+{
+	struct gpio_controller *__iomem g = get_irq_chip_data(irq);
+	u32 mask = (u32) get_irq_data(irq);
+
+	if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
+		return -EINVAL;
+
+	__raw_writel(mask, (trigger & IRQ_TYPE_EDGE_FALLING)
+		     ? &g->set_falling : &g->clr_falling);
+	__raw_writel(mask, (trigger & IRQ_TYPE_EDGE_RISING)
+		     ? &g->set_rising : &g->clr_rising);
+
+	return 0;
+}
+
 /*
  * NOTE:  for suspend/resume, probably best to make a platform_device with
  * suspend_late/resume_resume calls hooking into results of the set_wake()
@@ -275,6 +314,7 @@ static int __init davinci_gpio_irq_setup(void)
 	u32		binten = 0;
 	unsigned	ngpio, bank_irq;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	struct gpio_controller	*__iomem g;
 
 	ngpio = soc_info->gpio_num;
 
@@ -292,12 +332,63 @@ static int __init davinci_gpio_irq_setup(void)
 	}
 	clk_enable(clk);
 
+	/* Arrange gpio_to_irq() support, handling either direct IRQs or
+	 * banked IRQs.  Having GPIOs in the first GPIO bank use direct
+	 * IRQs, while the others use banked IRQs, would need some setup
+	 * tweaks to recognize hardware which can do that.
+	 */
+	for (gpio = 0, bank = 0; gpio < ngpio; bank++, gpio += 32) {
+		chips[bank].chip.to_irq = gpio_to_irq_banked;
+		chips[bank].irq_base = soc_info->gpio_unbanked
+			? -EINVAL
+			: (soc_info->intc_irq_num + gpio);
+	}
+
+	/*
+	 * AINTC can handle direct/unbanked IRQs for GPIOs, with the GPIO
+	 * controller only handling trigger modes.  We currently assume no
+	 * IRQ mux conflicts; gpio_irq_type_unbanked() is only for GPIOs.
+	 */
+	if (soc_info->gpio_unbanked) {
+		static struct irq_chip gpio_irqchip_unbanked;
+
+		/* pass "bank 0" GPIO IRQs to AINTC */
+		chips[0].chip.to_irq = gpio_to_irq_unbanked;
+		binten = BIT(0);
+
+		/* AINTC handles mask/unmask; GPIO handles triggering */
+		irq = bank_irq;
+		gpio_irqchip_unbanked = *get_irq_desc_chip(irq_to_desc(irq));
+		gpio_irqchip_unbanked.name = "GPIO-AINTC";
+		gpio_irqchip_unbanked.set_type = gpio_irq_type_unbanked;
+
+		/* default trigger: both edges */
+		g = gpio2controller(0);
+		__raw_writel(~0, &g->set_falling);
+		__raw_writel(~0, &g->set_rising);
+
+		/* set the direct IRQs up to use that irqchip */
+		for (gpio = 0; gpio < soc_info->gpio_unbanked; gpio++, irq++) {
+			set_irq_chip(irq, &gpio_irqchip_unbanked);
+			set_irq_data(irq, (void *) __gpio_mask(gpio));
+			set_irq_chip_data(irq, g);
+			irq_desc[irq].status |= IRQ_TYPE_EDGE_BOTH;
+		}
+
+		goto done;
+	}
+
+	/*
+	 * Or, AINTC can handle IRQs for banks of 16 GPIO IRQs, which we
+	 * then chain through our own handler.
+	 */
 	for (gpio = 0, irq = gpio_to_irq(0), bank = 0;
 			gpio < ngpio;
 			bank++, bank_irq++) {
-		struct gpio_controller	*__iomem g = gpio2controller(gpio);
 		unsigned		i;
 
+		/* disabled by default, enabled only as needed */
+		g = gpio2controller(gpio);
 		__raw_writel(~0, &g->clr_falling);
 		__raw_writel(~0, &g->clr_rising);
 
@@ -309,6 +400,7 @@ static int __init davinci_gpio_irq_setup(void)
 		for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) {
 			set_irq_chip(irq, &gpio_irqchip);
 			set_irq_chip_data(irq, g);
+			set_irq_data(irq, (void *) __gpio_mask(gpio));
 			set_irq_handler(irq, handle_simple_irq);
 			set_irq_flags(irq, IRQF_VALID);
 		}
@@ -316,6 +408,7 @@ static int __init davinci_gpio_irq_setup(void)
 		binten |= BIT(bank);
 	}
 
+done:
 	/* BINTEN -- per-bank interrupt enable. genirq would also let these
 	 * bits be set/cleared dynamically.
 	 */

arch/arm/mach-davinci/include/mach/asp.h

@@ -5,21 +5,73 @@
 #define __ASM_ARCH_DAVINCI_ASP_H
 
 #include <mach/irqs.h>
+#include <mach/edma.h>
 
-/* Bases of register banks */
+/* Bases of dm644x and dm355 register banks */
 #define DAVINCI_ASP0_BASE	0x01E02000
 #define DAVINCI_ASP1_BASE	0x01E04000
 
-/* EDMA channels */
+/* Bases of dm646x register banks */
+#define	DAVINCI_DM646X_MCASP0_REG_BASE		0x01D01000
+#define DAVINCI_DM646X_MCASP1_REG_BASE		0x01D01800
+
+/* Bases of da850/da830 McASP0  register banks */
+#define DAVINCI_DA8XX_MCASP0_REG_BASE	0x01D00000
+
+/* Bases of da830 McASP1 register banks */
+#define DAVINCI_DA830_MCASP1_REG_BASE	0x01D04000
+
+/* EDMA channels of dm644x and dm355 */
 #define DAVINCI_DMA_ASP0_TX	2
 #define DAVINCI_DMA_ASP0_RX	3
 #define DAVINCI_DMA_ASP1_TX	8
 #define DAVINCI_DMA_ASP1_RX	9
 
+/* EDMA channels of dm646x */
+#define	DAVINCI_DM646X_DMA_MCASP0_AXEVT0	6
+#define	DAVINCI_DM646X_DMA_MCASP0_AREVT0	9
+#define	DAVINCI_DM646X_DMA_MCASP1_AXEVT1	12
+
+/* EDMA channels of da850/da830 McASP0 */
+#define	DAVINCI_DA8XX_DMA_MCASP0_AREVT	0
+#define	DAVINCI_DA8XX_DMA_MCASP0_AXEVT	1
+
+/* EDMA channels of da830 McASP1 */
+#define	DAVINCI_DA830_DMA_MCASP1_AREVT	2
+#define	DAVINCI_DA830_DMA_MCASP1_AXEVT	3
+
 /* Interrupts */
 #define DAVINCI_ASP0_RX_INT	IRQ_MBRINT
 #define DAVINCI_ASP0_TX_INT	IRQ_MBXINT
 #define DAVINCI_ASP1_RX_INT	IRQ_MBRINT
 #define DAVINCI_ASP1_TX_INT	IRQ_MBXINT
 
+struct snd_platform_data {
+	u32 tx_dma_offset;
+	u32 rx_dma_offset;
+	enum dma_event_q eventq_no;	/* event queue number */
+	unsigned int codec_fmt;
+
+	/* McASP specific fields */
+	int tdm_slots;
+	u8 op_mode;
+	u8 num_serializer;
+	u8 *serial_dir;
+	u8 version;
+	u8 txnumevt;
+	u8 rxnumevt;
+};
+
+enum {
+	MCASP_VERSION_1 = 0,	/* DM646x */
+	MCASP_VERSION_2,	/* DA8xx/OMAPL1x */
+};
+
+#define INACTIVE_MODE	0
+#define TX_MODE		1
+#define RX_MODE		2
+
+#define DAVINCI_MCASP_IIS_MODE	0
+#define DAVINCI_MCASP_DIT_MODE	1
+
 #endif /* __ASM_ARCH_DAVINCI_ASP_H */

arch/arm/mach-davinci/include/mach/common.h

@@ -60,10 +60,10 @@ struct davinci_soc_info {
 	u8				*intc_irq_prios;
 	unsigned long			intc_irq_num;
 	struct davinci_timer_info	*timer_info;
-	void __iomem			*wdt_base;
 	void __iomem			*gpio_base;
 	unsigned			gpio_num;
 	unsigned			gpio_irq;
+	unsigned			gpio_unbanked;
 	struct platform_device		*serial_dev;
 	struct emac_platform_data	*emac_pdata;
 	dma_addr_t			sram_dma;

arch/arm/mach-davinci/include/mach/cputype.h

@@ -30,6 +30,9 @@ struct davinci_id {
 #define	DAVINCI_CPU_ID_DM6446		0x64460000
 #define	DAVINCI_CPU_ID_DM6467		0x64670000
 #define	DAVINCI_CPU_ID_DM355		0x03550000
+#define	DAVINCI_CPU_ID_DM365		0x03650000
+#define	DAVINCI_CPU_ID_DA830		0x08300000
+#define	DAVINCI_CPU_ID_DA850		0x08500000
 
 #define IS_DAVINCI_CPU(type, id)					\
 static inline int is_davinci_ ##type(void)				\
@@ -40,6 +43,9 @@ static inline int is_davinci_ ##type(void)				\
 IS_DAVINCI_CPU(dm644x, DAVINCI_CPU_ID_DM6446)
 IS_DAVINCI_CPU(dm646x, DAVINCI_CPU_ID_DM6467)
 IS_DAVINCI_CPU(dm355, DAVINCI_CPU_ID_DM355)
+IS_DAVINCI_CPU(dm365, DAVINCI_CPU_ID_DM365)
+IS_DAVINCI_CPU(da830, DAVINCI_CPU_ID_DA830)
+IS_DAVINCI_CPU(da850, DAVINCI_CPU_ID_DA850)
 
 #ifdef CONFIG_ARCH_DAVINCI_DM644x
 #define cpu_is_davinci_dm644x() is_davinci_dm644x()
@@ -59,4 +65,22 @@ IS_DAVINCI_CPU(dm355, DAVINCI_CPU_ID_DM355)
 #define cpu_is_davinci_dm355() 0
 #endif
 
+#ifdef CONFIG_ARCH_DAVINCI_DM365
+#define cpu_is_davinci_dm365() is_davinci_dm365()
+#else
+#define cpu_is_davinci_dm365() 0
+#endif
+
+#ifdef CONFIG_ARCH_DAVINCI_DA830
+#define cpu_is_davinci_da830() is_davinci_da830()
+#else
+#define cpu_is_davinci_da830() 0
+#endif
+
+#ifdef CONFIG_ARCH_DAVINCI_DA850
+#define cpu_is_davinci_da850() is_davinci_da850()
+#else
+#define cpu_is_davinci_da850() 0
+#endif
+
 #endif

arch/arm/mach-davinci/include/mach/da8xx.h

@@ -0,0 +1,121 @@
+/*
+ * Chip specific defines for DA8XX/OMAP L1XX SoC
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2007, 2009 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_DAVINCI_DA8XX_H
+#define __ASM_ARCH_DAVINCI_DA8XX_H
+
+#include <mach/serial.h>
+#include <mach/edma.h>
+#include <mach/i2c.h>
+#include <mach/emac.h>
+#include <mach/asp.h>
+#include <mach/mmc.h>
+
+/*
+ * The cp_intc interrupt controller for the da8xx isn't in the same
+ * chunk of physical memory space as the other registers (like it is
+ * on the davincis) so it needs to be mapped separately.  It will be
+ * mapped early on when the I/O space is mapped and we'll put it just
+ * before the I/O space in the processor's virtual memory space.
+ */
+#define DA8XX_CP_INTC_BASE	0xfffee000
+#define DA8XX_CP_INTC_SIZE	SZ_8K
+#define DA8XX_CP_INTC_VIRT	(IO_VIRT - DA8XX_CP_INTC_SIZE - SZ_4K)
+
+#define DA8XX_BOOT_CFG_BASE	(IO_PHYS + 0x14000)
+
+#define DA8XX_PSC0_BASE		0x01c10000
+#define DA8XX_PLL0_BASE		0x01c11000
+#define DA8XX_JTAG_ID_REG	0x01c14018
+#define DA8XX_TIMER64P0_BASE	0x01c20000
+#define DA8XX_TIMER64P1_BASE	0x01c21000
+#define DA8XX_GPIO_BASE		0x01e26000
+#define DA8XX_PSC1_BASE		0x01e27000
+#define DA8XX_LCD_CNTRL_BASE	0x01e13000
+#define DA8XX_MMCSD0_BASE	0x01c40000
+#define DA8XX_AEMIF_CS2_BASE	0x60000000
+#define DA8XX_AEMIF_CS3_BASE	0x62000000
+#define DA8XX_AEMIF_CTL_BASE	0x68000000
+
+#define PINMUX0			0x00
+#define PINMUX1			0x04
+#define PINMUX2			0x08
+#define PINMUX3			0x0c
+#define PINMUX4			0x10
+#define PINMUX5			0x14
+#define PINMUX6			0x18
+#define PINMUX7			0x1c
+#define PINMUX8			0x20
+#define PINMUX9			0x24
+#define PINMUX10		0x28
+#define PINMUX11		0x2c
+#define PINMUX12		0x30
+#define PINMUX13		0x34
+#define PINMUX14		0x38
+#define PINMUX15		0x3c
+#define PINMUX16		0x40
+#define PINMUX17		0x44
+#define PINMUX18		0x48
+#define PINMUX19		0x4c
+
+void __init da830_init(void);
+void __init da850_init(void);
+
+int da8xx_register_edma(void);
+int da8xx_register_i2c(int instance, struct davinci_i2c_platform_data *pdata);
+int da8xx_register_watchdog(void);
+int da8xx_register_emac(void);
+int da8xx_register_lcdc(void);
+int da8xx_register_mmcsd0(struct davinci_mmc_config *config);
+void __init da8xx_init_mcasp(int id, struct snd_platform_data *pdata);
+
+extern struct platform_device da8xx_serial_device;
+extern struct emac_platform_data da8xx_emac_pdata;
+
+extern const short da830_emif25_pins[];
+extern const short da830_spi0_pins[];
+extern const short da830_spi1_pins[];
+extern const short da830_mmc_sd_pins[];
+extern const short da830_uart0_pins[];
+extern const short da830_uart1_pins[];
+extern const short da830_uart2_pins[];
+extern const short da830_usb20_pins[];
+extern const short da830_usb11_pins[];
+extern const short da830_uhpi_pins[];
+extern const short da830_cpgmac_pins[];
+extern const short da830_emif3c_pins[];
+extern const short da830_mcasp0_pins[];
+extern const short da830_mcasp1_pins[];
+extern const short da830_mcasp2_pins[];
+extern const short da830_i2c0_pins[];
+extern const short da830_i2c1_pins[];
+extern const short da830_lcdcntl_pins[];
+extern const short da830_pwm_pins[];
+extern const short da830_ecap0_pins[];
+extern const short da830_ecap1_pins[];
+extern const short da830_ecap2_pins[];
+extern const short da830_eqep0_pins[];
+extern const short da830_eqep1_pins[];
+
+extern const short da850_uart0_pins[];
+extern const short da850_uart1_pins[];
+extern const short da850_uart2_pins[];
+extern const short da850_i2c0_pins[];
+extern const short da850_i2c1_pins[];
+extern const short da850_cpgmac_pins[];
+extern const short da850_mcasp_pins[];
+extern const short da850_lcdcntl_pins[];
+extern const short da850_mmcsd0_pins[];
+extern const short da850_nand_pins[];
+extern const short da850_nor_pins[];
+
+int da8xx_pinmux_setup(const short pins[]);
+
+#endif /* __ASM_ARCH_DAVINCI_DA8XX_H */

arch/arm/mach-davinci/include/mach/debug-macro.S

@@ -24,7 +24,15 @@
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #0x01000000	@ physical base address
 		movne	\rx, #0xfe000000	@ virtual base
+#if defined(CONFIG_ARCH_DAVINCI_DA8XX) && defined(CONFIG_ARCH_DAVINCI_DMx)
+#error Cannot enable DaVinci and DA8XX platforms concurrently
+#elif defined(CONFIG_MACH_DAVINCI_DA830_EVM) || \
+	defined(CONFIG_MACH_DAVINCI_DA850_EVM)
+		orr	\rx, \rx, #0x00d00000	@ physical base address
+		orr	\rx, \rx, #0x0000d000	@ of UART 2
+#else
 		orr	\rx, \rx, #0x00c20000   @ UART 0
+#endif
 		.endm
 
 		.macro	senduart,rd,rx

arch/arm/mach-davinci/include/mach/dm355.h

@@ -12,11 +12,18 @@
 #define __ASM_ARCH_DM355_H
 
 #include <mach/hardware.h>
+#include <mach/asp.h>
+#include <media/davinci/vpfe_capture.h>
+
+#define ASP1_TX_EVT_EN	1
+#define ASP1_RX_EVT_EN	2
 
 struct spi_board_info;
 
 void __init dm355_init(void);
 void dm355_init_spi0(unsigned chipselect_mask,
 		struct spi_board_info *info, unsigned len);
+void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata);
+void dm355_set_vpfe_config(struct vpfe_config *cfg);
 
 #endif /* __ASM_ARCH_DM355_H */

arch/arm/mach-davinci/include/mach/dm365.h

@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2009 Texas Instruments Incorporated
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef __ASM_ARCH_DM365_H
+#define __ASM_ARCH_DM665_H
+
+#include <linux/platform_device.h>
+#include <mach/hardware.h>
+#include <mach/emac.h>
+
+#define DM365_EMAC_BASE			(0x01D07000)
+#define DM365_EMAC_CNTRL_OFFSET		(0x0000)
+#define DM365_EMAC_CNTRL_MOD_OFFSET	(0x3000)
+#define DM365_EMAC_CNTRL_RAM_OFFSET	(0x1000)
+#define DM365_EMAC_MDIO_OFFSET		(0x4000)
+#define DM365_EMAC_CNTRL_RAM_SIZE	(0x2000)
+
+void __init dm365_init(void);
+
+#endif /* __ASM_ARCH_DM365_H */

arch/arm/mach-davinci/include/mach/dm644x.h

@@ -25,6 +25,8 @@
 #include <linux/platform_device.h>
 #include <mach/hardware.h>
 #include <mach/emac.h>
+#include <mach/asp.h>
+#include <media/davinci/vpfe_capture.h>
 
 #define DM644X_EMAC_BASE		(0x01C80000)
 #define DM644X_EMAC_CNTRL_OFFSET	(0x0000)
@@ -34,5 +36,7 @@
 #define DM644X_EMAC_CNTRL_RAM_SIZE	(0x2000)
 
 void __init dm644x_init(void);
+void __init dm644x_init_asp(struct snd_platform_data *pdata);
+void dm644x_set_vpfe_config(struct vpfe_config *cfg);
 
 #endif /* __ASM_ARCH_DM644X_H */

arch/arm/mach-davinci/include/mach/dm646x.h

@@ -13,6 +13,9 @@
 
 #include <mach/hardware.h>
 #include <mach/emac.h>
+#include <mach/asp.h>
+#include <linux/i2c.h>
+#include <linux/videodev2.h>
 
 #define DM646X_EMAC_BASE		(0x01C80000)
 #define DM646X_EMAC_CNTRL_OFFSET	(0x0000)
@@ -21,6 +24,68 @@
 #define DM646X_EMAC_MDIO_OFFSET		(0x4000)
 #define DM646X_EMAC_CNTRL_RAM_SIZE	(0x2000)
 
+#define DM646X_ATA_REG_BASE		(0x01C66000)
+
 void __init dm646x_init(void);
+void __init dm646x_init_ide(void);
+void __init dm646x_init_mcasp0(struct snd_platform_data *pdata);
+void __init dm646x_init_mcasp1(struct snd_platform_data *pdata);
+
+void dm646x_video_init(void);
+
+enum vpif_if_type {
+	VPIF_IF_BT656,
+	VPIF_IF_BT1120,
+	VPIF_IF_RAW_BAYER
+};
+
+struct vpif_interface {
+	enum vpif_if_type if_type;
+	unsigned hd_pol:1;
+	unsigned vd_pol:1;
+	unsigned fid_pol:1;
+};
+
+struct vpif_subdev_info {
+	const char *name;
+	struct i2c_board_info board_info;
+	u32 input;
+	u32 output;
+	unsigned can_route:1;
+	struct vpif_interface vpif_if;
+};
+
+struct vpif_display_config {
+	int (*set_clock)(int, int);
+	struct vpif_subdev_info *subdevinfo;
+	int subdev_count;
+	const char **output;
+	int output_count;
+	const char *card_name;
+};
+
+struct vpif_input {
+	struct v4l2_input input;
+	const char *subdev_name;
+};
+
+#define VPIF_CAPTURE_MAX_CHANNELS	2
+
+struct vpif_capture_chan_config {
+	const struct vpif_input *inputs;
+	int input_count;
+};
+
+struct vpif_capture_config {
+	int (*setup_input_channel_mode)(int);
+	int (*setup_input_path)(int, const char *);
+	struct vpif_capture_chan_config chan_config[VPIF_CAPTURE_MAX_CHANNELS];
+	struct vpif_subdev_info *subdev_info;
+	int subdev_count;
+	const char *card_name;
+};
+
+void dm646x_setup_vpif(struct vpif_display_config *,
+		       struct vpif_capture_config *);
 
 #endif /* __ASM_ARCH_DM646X_H */

arch/arm/mach-davinci/include/mach/edma.h

@@ -139,6 +139,54 @@ struct edmacc_param {
 #define DAVINCI_DMA_PWM1                 53
 #define DAVINCI_DMA_PWM2                 54
 
+/* DA830 specific EDMA3 information */
+#define EDMA_DA830_NUM_DMACH		32
+#define EDMA_DA830_NUM_TCC		32
+#define EDMA_DA830_NUM_PARAMENTRY	128
+#define EDMA_DA830_NUM_EVQUE		2
+#define EDMA_DA830_NUM_TC		2
+#define EDMA_DA830_CHMAP_EXIST		0
+#define EDMA_DA830_NUM_REGIONS		4
+#define DA830_DMACH2EVENT_MAP0		0x000FC03Fu
+#define DA830_DMACH2EVENT_MAP1		0x00000000u
+#define DA830_EDMA_ARM_OWN		0x30FFCCFFu
+
+/* DA830 specific EDMA3 Events Information */
+enum DA830_edma_ch {
+	DA830_DMACH_MCASP0_RX,
+	DA830_DMACH_MCASP0_TX,
+	DA830_DMACH_MCASP1_RX,
+	DA830_DMACH_MCASP1_TX,
+	DA830_DMACH_MCASP2_RX,
+	DA830_DMACH_MCASP2_TX,
+	DA830_DMACH_GPIO_BNK0INT,
+	DA830_DMACH_GPIO_BNK1INT,
+	DA830_DMACH_UART0_RX,
+	DA830_DMACH_UART0_TX,
+	DA830_DMACH_TMR64P0_EVTOUT12,
+	DA830_DMACH_TMR64P0_EVTOUT34,
+	DA830_DMACH_UART1_RX,
+	DA830_DMACH_UART1_TX,
+	DA830_DMACH_SPI0_RX,
+	DA830_DMACH_SPI0_TX,
+	DA830_DMACH_MMCSD_RX,
+	DA830_DMACH_MMCSD_TX,
+	DA830_DMACH_SPI1_RX,
+	DA830_DMACH_SPI1_TX,
+	DA830_DMACH_DMAX_EVTOUT6,
+	DA830_DMACH_DMAX_EVTOUT7,
+	DA830_DMACH_GPIO_BNK2INT,
+	DA830_DMACH_GPIO_BNK3INT,
+	DA830_DMACH_I2C0_RX,
+	DA830_DMACH_I2C0_TX,
+	DA830_DMACH_I2C1_RX,
+	DA830_DMACH_I2C1_TX,
+	DA830_DMACH_GPIO_BNK4INT,
+	DA830_DMACH_GPIO_BNK5INT,
+	DA830_DMACH_UART2_RX,
+	DA830_DMACH_UART2_TX
+};
+
 /*ch_status paramater of callback function possible values*/
 #define DMA_COMPLETE 1
 #define DMA_CC_ERROR 2
@@ -162,6 +210,8 @@ enum fifo_width {
 enum dma_event_q {
 	EVENTQ_0 = 0,
 	EVENTQ_1 = 1,
+	EVENTQ_2 = 2,
+	EVENTQ_3 = 3,
 	EVENTQ_DEFAULT = -1
 };
 
@@ -170,8 +220,15 @@ enum sync_dimension {
 	ABSYNC = 1
 };
 
+#define EDMA_CTLR_CHAN(ctlr, chan)	(((ctlr) << 16) | (chan))
+#define EDMA_CTLR(i)			((i) >> 16)
+#define EDMA_CHAN_SLOT(i)		((i) & 0xffff)
+
 #define EDMA_CHANNEL_ANY		-1	/* for edma_alloc_channel() */
 #define EDMA_SLOT_ANY			-1	/* for edma_alloc_slot() */
+#define EDMA_CONT_PARAMS_ANY		 1001
+#define EDMA_CONT_PARAMS_FIXED_EXACT	 1002
+#define EDMA_CONT_PARAMS_FIXED_NOT_EXACT 1003
 
 /* alloc/free DMA channels and their dedicated parameter RAM slots */
 int edma_alloc_channel(int channel,
@@ -180,9 +237,13 @@ int edma_alloc_channel(int channel,
 void edma_free_channel(unsigned channel);
 
 /* alloc/free parameter RAM slots */
-int edma_alloc_slot(int slot);
+int edma_alloc_slot(unsigned ctlr, int slot);
 void edma_free_slot(unsigned slot);
 
+/* alloc/free a set of contiguous parameter RAM slots */
+int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count);
+int edma_free_cont_slots(unsigned slot, int count);
+
 /* calls that operate on part of a parameter RAM slot */
 void edma_set_src(unsigned slot, dma_addr_t src_port,
 				enum address_mode mode, enum fifo_width);
@@ -216,9 +277,13 @@ struct edma_soc_info {
 	unsigned	n_region;
 	unsigned	n_slot;
 	unsigned	n_tc;
+	unsigned	n_cc;
+	enum dma_event_q	default_queue;
 
 	/* list of channels with no even trigger; terminated by "-1" */
 	const s8	*noevent;
+	const s8	(*queue_tc_mapping)[2];
+	const s8	(*queue_priority_mapping)[2];
 };
 
 #endif

arch/arm/mach-davinci/include/mach/gpio.h

@@ -42,6 +42,9 @@
  */
 #define	GPIO(X)		(X)		/* 0 <= X <= (DAVINCI_N_GPIO - 1) */
 
+/* Convert GPIO signal to GPIO pin number */
+#define GPIO_TO_PIN(bank, gpio)	(16 * (bank) + (gpio))
+
 struct gpio_controller {
 	u32	dir;
 	u32	out_data;
@@ -78,6 +81,8 @@ __gpio_to_controller(unsigned gpio)
 		ptr = base + 0x60;
 	else if (gpio < 32 * 4)
 		ptr = base + 0x88;
+	else if (gpio < 32 * 5)
+		ptr = base + 0xb0;
 	else
 		ptr = NULL;
 	return ptr;
@@ -142,15 +147,13 @@ static inline int gpio_cansleep(unsigned gpio)
 
 static inline int gpio_to_irq(unsigned gpio)
 {
-	if (gpio >= DAVINCI_N_GPIO)
-		return -EINVAL;
-	return davinci_soc_info.intc_irq_num + gpio;
+	return __gpio_to_irq(gpio);
 }
 
 static inline int irq_to_gpio(unsigned irq)
 {
-	/* caller guarantees gpio_to_irq() succeeded */
-	return irq - davinci_soc_info.intc_irq_num;
+	/* don't support the reverse mapping */
+	return -ENOSYS;
 }
 
 #endif				/* __DAVINCI_GPIO_H */

arch/arm/mach-davinci/include/mach/hardware.h

@@ -24,4 +24,21 @@
 /* System control register offsets */
 #define DM64XX_VDD3P3V_PWDN	0x48
 
+/*
+ * I/O mapping
+ */
+#define IO_PHYS				0x01c00000
+#define IO_OFFSET			0xfd000000 /* Virtual IO = 0xfec00000 */
+#define IO_SIZE				0x00400000
+#define IO_VIRT				(IO_PHYS + IO_OFFSET)
+#define io_v2p(va)			((va) - IO_OFFSET)
+#define __IO_ADDRESS(x)			((x) + IO_OFFSET)
+#define IO_ADDRESS(pa)			IOMEM(__IO_ADDRESS(pa))
+
+#ifdef __ASSEMBLER__
+#define IOMEM(x)                	x
+#else
+#define IOMEM(x)                	((void __force __iomem *)(x))
+#endif
+
 #endif /* __ASM_ARCH_HARDWARE_H */

arch/arm/mach-davinci/include/mach/io.h

@@ -13,18 +13,6 @@
 
 #define IO_SPACE_LIMIT 0xffffffff
 
-/*
- * ----------------------------------------------------------------------------
- * I/O mapping
- * ----------------------------------------------------------------------------
- */
-#define IO_PHYS		0x01c00000
-#define IO_OFFSET	0xfd000000 /* Virtual IO = 0xfec00000 */
-#define IO_SIZE		0x00400000
-#define IO_VIRT		(IO_PHYS + IO_OFFSET)
-#define io_v2p(va)	((va) - IO_OFFSET)
-#define __IO_ADDRESS(x)	((x) + IO_OFFSET)
-
 /*
  * We don't actually have real ISA nor PCI buses, but there is so many
  * drivers out there that might just work if we fake them...
@@ -33,19 +21,12 @@
 #define __mem_pci(a)		(a)
 #define __mem_isa(a)		(a)
 
-#define IO_ADDRESS(pa)          IOMEM(__IO_ADDRESS(pa))
-
-#ifdef __ASSEMBLER__
-#define IOMEM(x)                x
-#else
-#define IOMEM(x)                ((void __force __iomem *)(x))
-
+#ifndef __ASSEMBLER__
 #define __arch_ioremap(p, s, t)	davinci_ioremap(p, s, t)
 #define __arch_iounmap(v)	davinci_iounmap(v)
 
 void __iomem *davinci_ioremap(unsigned long phys, size_t size,
 			      unsigned int type);
 void davinci_iounmap(volatile void __iomem *addr);
-
-#endif /* __ASSEMBLER__ */
+#endif
 #endif /* __ASM_ARCH_IO_H */

arch/arm/mach-davinci/include/mach/irqs.h

@@ -99,9 +99,6 @@
 #define IRQ_EMUINT       63
 
 #define DAVINCI_N_AINTC_IRQ	64
-#define DAVINCI_N_GPIO		104
-
-#define NR_IRQS			(DAVINCI_N_AINTC_IRQ + DAVINCI_N_GPIO)
 
 #define ARCH_TIMER_IRQ IRQ_TINT1_TINT34
 
@@ -206,4 +203,206 @@
 #define IRQ_DM355_GPIOBNK5	59
 #define IRQ_DM355_GPIOBNK6	60
 
+/* DaVinci DM365-specific Interrupts */
+#define IRQ_DM365_INSFINT	7
+#define IRQ_DM365_IMXINT1	8
+#define IRQ_DM365_IMXINT0	10
+#define IRQ_DM365_KLD_ARMINT	10
+#define IRQ_DM365_IMCOPINT	11
+#define IRQ_DM365_RTOINT	13
+#define IRQ_DM365_TINT5		14
+#define IRQ_DM365_TINT6		15
+#define IRQ_DM365_SPINT2_1	21
+#define IRQ_DM365_TINT7		22
+#define IRQ_DM365_SDIOINT0	23
+#define IRQ_DM365_MMCINT1	27
+#define IRQ_DM365_PWMINT3	28
+#define IRQ_DM365_SDIOINT1	31
+#define IRQ_DM365_SPIINT0_0	42
+#define IRQ_DM365_SPIINT3_0	43
+#define IRQ_DM365_GPIO0		44
+#define IRQ_DM365_GPIO1		45
+#define IRQ_DM365_GPIO2		46
+#define IRQ_DM365_GPIO3		47
+#define IRQ_DM365_GPIO4		48
+#define IRQ_DM365_GPIO5		49
+#define IRQ_DM365_GPIO6		50
+#define IRQ_DM365_GPIO7		51
+#define IRQ_DM365_EMAC_RXTHRESH	52
+#define IRQ_DM365_EMAC_RXPULSE	53
+#define IRQ_DM365_EMAC_TXPULSE	54
+#define IRQ_DM365_EMAC_MISCPULSE 55
+#define IRQ_DM365_GPIO12	56
+#define IRQ_DM365_GPIO13	57
+#define IRQ_DM365_GPIO14	58
+#define IRQ_DM365_GPIO15	59
+#define IRQ_DM365_ADCINT	59
+#define IRQ_DM365_KEYINT	60
+#define IRQ_DM365_TCERRINT2	61
+#define IRQ_DM365_TCERRINT3	62
+#define IRQ_DM365_EMUINT	63
+
+/* DA8XX interrupts */
+#define IRQ_DA8XX_COMMTX		0
+#define IRQ_DA8XX_COMMRX		1
+#define IRQ_DA8XX_NINT			2
+#define IRQ_DA8XX_EVTOUT0		3
+#define IRQ_DA8XX_EVTOUT1		4
+#define IRQ_DA8XX_EVTOUT2		5
+#define IRQ_DA8XX_EVTOUT3		6
+#define IRQ_DA8XX_EVTOUT4		7
+#define IRQ_DA8XX_EVTOUT5		8
+#define IRQ_DA8XX_EVTOUT6		9
+#define IRQ_DA8XX_EVTOUT7		10
+#define IRQ_DA8XX_CCINT0		11
+#define IRQ_DA8XX_CCERRINT		12
+#define IRQ_DA8XX_TCERRINT0		13
+#define IRQ_DA8XX_AEMIFINT		14
+#define IRQ_DA8XX_I2CINT0		15
+#define IRQ_DA8XX_MMCSDINT0		16
+#define IRQ_DA8XX_MMCSDINT1		17
+#define IRQ_DA8XX_ALLINT0		18
+#define IRQ_DA8XX_RTC			19
+#define IRQ_DA8XX_SPINT0		20
+#define IRQ_DA8XX_TINT12_0		21
+#define IRQ_DA8XX_TINT34_0		22
+#define IRQ_DA8XX_TINT12_1		23
+#define IRQ_DA8XX_TINT34_1		24
+#define IRQ_DA8XX_UARTINT0		25
+#define IRQ_DA8XX_KEYMGRINT		26
+#define IRQ_DA8XX_SECINT		26
+#define IRQ_DA8XX_SECKEYERR		26
+#define IRQ_DA8XX_CHIPINT0		28
+#define IRQ_DA8XX_CHIPINT1		29
+#define IRQ_DA8XX_CHIPINT2		30
+#define IRQ_DA8XX_CHIPINT3		31
+#define IRQ_DA8XX_TCERRINT1		32
+#define IRQ_DA8XX_C0_RX_THRESH_PULSE	33
+#define IRQ_DA8XX_C0_RX_PULSE		34
+#define IRQ_DA8XX_C0_TX_PULSE		35
+#define IRQ_DA8XX_C0_MISC_PULSE		36
+#define IRQ_DA8XX_C1_RX_THRESH_PULSE	37
+#define IRQ_DA8XX_C1_RX_PULSE		38
+#define IRQ_DA8XX_C1_TX_PULSE		39
+#define IRQ_DA8XX_C1_MISC_PULSE		40
+#define IRQ_DA8XX_MEMERR		41
+#define IRQ_DA8XX_GPIO0			42
+#define IRQ_DA8XX_GPIO1			43
+#define IRQ_DA8XX_GPIO2			44
+#define IRQ_DA8XX_GPIO3			45
+#define IRQ_DA8XX_GPIO4			46
+#define IRQ_DA8XX_GPIO5			47
+#define IRQ_DA8XX_GPIO6			48
+#define IRQ_DA8XX_GPIO7			49
+#define IRQ_DA8XX_GPIO8			50
+#define IRQ_DA8XX_I2CINT1		51
+#define IRQ_DA8XX_LCDINT		52
+#define IRQ_DA8XX_UARTINT1		53
+#define IRQ_DA8XX_MCASPINT		54
+#define IRQ_DA8XX_ALLINT1		55
+#define IRQ_DA8XX_SPINT1		56
+#define IRQ_DA8XX_UHPI_INT1		57
+#define IRQ_DA8XX_USB_INT		58
+#define IRQ_DA8XX_IRQN			59
+#define IRQ_DA8XX_RWAKEUP		60
+#define IRQ_DA8XX_UARTINT2		61
+#define IRQ_DA8XX_DFTSSINT		62
+#define IRQ_DA8XX_EHRPWM0		63
+#define IRQ_DA8XX_EHRPWM0TZ		64
+#define IRQ_DA8XX_EHRPWM1		65
+#define IRQ_DA8XX_EHRPWM1TZ		66
+#define IRQ_DA8XX_ECAP0			69
+#define IRQ_DA8XX_ECAP1			70
+#define IRQ_DA8XX_ECAP2			71
+#define IRQ_DA8XX_ARMCLKSTOPREQ		90
+
+/* DA830 specific interrupts */
+#define IRQ_DA830_MPUERR		27
+#define IRQ_DA830_IOPUERR		27
+#define IRQ_DA830_BOOTCFGERR		27
+#define IRQ_DA830_EHRPWM2		67
+#define IRQ_DA830_EHRPWM2TZ		68
+#define IRQ_DA830_EQEP0			72
+#define IRQ_DA830_EQEP1			73
+#define IRQ_DA830_T12CMPINT0_0		74
+#define IRQ_DA830_T12CMPINT1_0		75
+#define IRQ_DA830_T12CMPINT2_0		76
+#define IRQ_DA830_T12CMPINT3_0		77
+#define IRQ_DA830_T12CMPINT4_0		78
+#define IRQ_DA830_T12CMPINT5_0		79
+#define IRQ_DA830_T12CMPINT6_0		80
+#define IRQ_DA830_T12CMPINT7_0		81
+#define IRQ_DA830_T12CMPINT0_1		82
+#define IRQ_DA830_T12CMPINT1_1		83
+#define IRQ_DA830_T12CMPINT2_1		84
+#define IRQ_DA830_T12CMPINT3_1		85
+#define IRQ_DA830_T12CMPINT4_1		86
+#define IRQ_DA830_T12CMPINT5_1		87
+#define IRQ_DA830_T12CMPINT6_1		88
+#define IRQ_DA830_T12CMPINT7_1		89
+
+#define DA830_N_CP_INTC_IRQ		96
+
+/* DA850 speicific interrupts */
+#define IRQ_DA850_MPUADDRERR0		27
+#define IRQ_DA850_MPUPROTERR0		27
+#define IRQ_DA850_IOPUADDRERR0		27
+#define IRQ_DA850_IOPUPROTERR0		27
+#define IRQ_DA850_IOPUADDRERR1		27
+#define IRQ_DA850_IOPUPROTERR1		27
+#define IRQ_DA850_IOPUADDRERR2		27
+#define IRQ_DA850_IOPUPROTERR2		27
+#define IRQ_DA850_BOOTCFG_ADDR_ERR	27
+#define IRQ_DA850_BOOTCFG_PROT_ERR	27
+#define IRQ_DA850_MPUADDRERR1		27
+#define IRQ_DA850_MPUPROTERR1		27
+#define IRQ_DA850_IOPUADDRERR3		27
+#define IRQ_DA850_IOPUPROTERR3		27
+#define IRQ_DA850_IOPUADDRERR4		27
+#define IRQ_DA850_IOPUPROTERR4		27
+#define IRQ_DA850_IOPUADDRERR5		27
+#define IRQ_DA850_IOPUPROTERR5		27
+#define IRQ_DA850_MIOPU_BOOTCFG_ERR	27
+#define IRQ_DA850_SATAINT		67
+#define IRQ_DA850_TINT12_2		68
+#define IRQ_DA850_TINT34_2		68
+#define IRQ_DA850_TINTALL_2		68
+#define IRQ_DA850_MMCSDINT0_1		72
+#define IRQ_DA850_MMCSDINT1_1		73
+#define IRQ_DA850_T12CMPINT0_2		74
+#define IRQ_DA850_T12CMPINT1_2		75
+#define IRQ_DA850_T12CMPINT2_2		76
+#define IRQ_DA850_T12CMPINT3_2		77
+#define IRQ_DA850_T12CMPINT4_2		78
+#define IRQ_DA850_T12CMPINT5_2		79
+#define IRQ_DA850_T12CMPINT6_2		80
+#define IRQ_DA850_T12CMPINT7_2		81
+#define IRQ_DA850_T12CMPINT0_3		82
+#define IRQ_DA850_T12CMPINT1_3		83
+#define IRQ_DA850_T12CMPINT2_3		84
+#define IRQ_DA850_T12CMPINT3_3		85
+#define IRQ_DA850_T12CMPINT4_3		86
+#define IRQ_DA850_T12CMPINT5_3		87
+#define IRQ_DA850_T12CMPINT6_3		88
+#define IRQ_DA850_T12CMPINT7_3		89
+#define IRQ_DA850_RPIINT		91
+#define IRQ_DA850_VPIFINT		92
+#define IRQ_DA850_CCINT1		93
+#define IRQ_DA850_CCERRINT1		94
+#define IRQ_DA850_TCERRINT2		95
+#define IRQ_DA850_TINT12_3		96
+#define IRQ_DA850_TINT34_3		96
+#define IRQ_DA850_TINTALL_3		96
+#define IRQ_DA850_MCBSP0RINT		97
+#define IRQ_DA850_MCBSP0XINT		98
+#define IRQ_DA850_MCBSP1RINT		99
+#define IRQ_DA850_MCBSP1XINT		100
+
+#define DA850_N_CP_INTC_IRQ		101
+
+/* da850 currently has the most gpio pins (144) */
+#define DAVINCI_N_GPIO			144
+/* da850 currently has the most irqs so use DA850_N_CP_INTC_IRQ */
+#define NR_IRQS				(DA850_N_CP_INTC_IRQ + DAVINCI_N_GPIO)
+
 #endif /* __ASM_ARCH_IRQS_H */

arch/arm/mach-davinci/include/mach/memory.h

@@ -20,9 +20,16 @@
 /**************************************************************************
  * Definitions
  **************************************************************************/
-#define DAVINCI_DDR_BASE    0x80000000
+#define DAVINCI_DDR_BASE	0x80000000
+#define DA8XX_DDR_BASE		0xc0000000
 
+#if defined(CONFIG_ARCH_DAVINCI_DA8XX) && defined(CONFIG_ARCH_DAVINCI_DMx)
+#error Cannot enable DaVinci and DA8XX platforms concurrently
+#elif defined(CONFIG_ARCH_DAVINCI_DA8XX)
+#define PHYS_OFFSET DA8XX_DDR_BASE
+#else
 #define PHYS_OFFSET DAVINCI_DDR_BASE
+#endif
 
 /*
  * Increase size of DMA-consistent memory region

arch/arm/mach-davinci/include/mach/mux.h

@@ -154,6 +154,737 @@ enum davinci_dm355_index {
 	DM355_EVT8_ASP1_TX,
 	DM355_EVT9_ASP1_RX,
 	DM355_EVT26_MMC0_RX,
+
+	/* Video Out */
+	DM355_VOUT_FIELD,
+	DM355_VOUT_FIELD_G70,
+	DM355_VOUT_HVSYNC,
+	DM355_VOUT_COUTL_EN,
+	DM355_VOUT_COUTH_EN,
+
+	/* Video In Pin Mux */
+	DM355_VIN_PCLK,
+	DM355_VIN_CAM_WEN,
+	DM355_VIN_CAM_VD,
+	DM355_VIN_CAM_HD,
+	DM355_VIN_YIN_EN,
+	DM355_VIN_CINL_EN,
+	DM355_VIN_CINH_EN,
+};
+
+enum davinci_dm365_index {
+	/* MMC/SD 0 */
+	DM365_MMCSD0,
+
+	/* MMC/SD 1 */
+	DM365_SD1_CLK,
+	DM365_SD1_CMD,
+	DM365_SD1_DATA3,
+	DM365_SD1_DATA2,
+	DM365_SD1_DATA1,
+	DM365_SD1_DATA0,
+
+	/* I2C */
+	DM365_I2C_SDA,
+	DM365_I2C_SCL,
+
+	/* AEMIF */
+	DM365_AEMIF_AR,
+	DM365_AEMIF_A3,
+	DM365_AEMIF_A7,
+	DM365_AEMIF_D15_8,
+	DM365_AEMIF_CE0,
+
+	/* ASP0 function */
+	DM365_MCBSP0_BDX,
+	DM365_MCBSP0_X,
+	DM365_MCBSP0_BFSX,
+	DM365_MCBSP0_BDR,
+	DM365_MCBSP0_R,
+	DM365_MCBSP0_BFSR,
+
+	/* SPI0 */
+	DM365_SPI0_SCLK,
+	DM365_SPI0_SDI,
+	DM365_SPI0_SDO,
+	DM365_SPI0_SDENA0,
+	DM365_SPI0_SDENA1,
+
+	/* UART */
+	DM365_UART0_RXD,
+	DM365_UART0_TXD,
+	DM365_UART1_RXD,
+	DM365_UART1_TXD,
+	DM365_UART1_RTS,
+	DM365_UART1_CTS,
+
+	/* EMAC */
+	DM365_EMAC_TX_EN,
+	DM365_EMAC_TX_CLK,
+	DM365_EMAC_COL,
+	DM365_EMAC_TXD3,
+	DM365_EMAC_TXD2,
+	DM365_EMAC_TXD1,
+	DM365_EMAC_TXD0,
+	DM365_EMAC_RXD3,
+	DM365_EMAC_RXD2,
+	DM365_EMAC_RXD1,
+	DM365_EMAC_RXD0,
+	DM365_EMAC_RX_CLK,
+	DM365_EMAC_RX_DV,
+	DM365_EMAC_RX_ER,
+	DM365_EMAC_CRS,
+	DM365_EMAC_MDIO,
+	DM365_EMAC_MDCLK,
+
+	/* Keypad */
+	DM365_KEYPAD,
+
+	/* PWM */
+	DM365_PWM0,
+	DM365_PWM0_G23,
+	DM365_PWM1,
+	DM365_PWM1_G25,
+	DM365_PWM2_G87,
+	DM365_PWM2_G88,
+	DM365_PWM2_G89,
+	DM365_PWM2_G90,
+	DM365_PWM3_G80,
+	DM365_PWM3_G81,
+	DM365_PWM3_G85,
+	DM365_PWM3_G86,
+
+	/* SPI1 */
+	DM365_SPI1_SCLK,
+	DM365_SPI1_SDO,
+	DM365_SPI1_SDI,
+	DM365_SPI1_SDENA0,
+	DM365_SPI1_SDENA1,
+
+	/* SPI2 */
+	DM365_SPI2_SCLK,
+	DM365_SPI2_SDO,
+	DM365_SPI2_SDI,
+	DM365_SPI2_SDENA0,
+	DM365_SPI2_SDENA1,
+
+	/* SPI3 */
+	DM365_SPI3_SCLK,
+	DM365_SPI3_SDO,
+	DM365_SPI3_SDI,
+	DM365_SPI3_SDENA0,
+	DM365_SPI3_SDENA1,
+
+	/* SPI4 */
+	DM365_SPI4_SCLK,
+	DM365_SPI4_SDO,
+	DM365_SPI4_SDI,
+	DM365_SPI4_SDENA0,
+	DM365_SPI4_SDENA1,
+
+	/* GPIO */
+	DM365_GPIO20,
+	DM365_GPIO33,
+	DM365_GPIO40,
+
+	/* Video */
+	DM365_VOUT_FIELD,
+	DM365_VOUT_FIELD_G81,
+	DM365_VOUT_HVSYNC,
+	DM365_VOUT_COUTL_EN,
+	DM365_VOUT_COUTH_EN,
+	DM365_VIN_CAM_WEN,
+	DM365_VIN_CAM_VD,
+	DM365_VIN_CAM_HD,
+	DM365_VIN_YIN4_7_EN,
+	DM365_VIN_YIN0_3_EN,
+
+	/* IRQ muxing */
+	DM365_INT_EDMA_CC,
+	DM365_INT_EDMA_TC0_ERR,
+	DM365_INT_EDMA_TC1_ERR,
+	DM365_INT_EDMA_TC2_ERR,
+	DM365_INT_EDMA_TC3_ERR,
+	DM365_INT_PRTCSS,
+	DM365_INT_EMAC_RXTHRESH,
+	DM365_INT_EMAC_RXPULSE,
+	DM365_INT_EMAC_TXPULSE,
+	DM365_INT_EMAC_MISCPULSE,
+	DM365_INT_IMX0_ENABLE,
+	DM365_INT_IMX0_DISABLE,
+	DM365_INT_HDVICP_ENABLE,
+	DM365_INT_HDVICP_DISABLE,
+	DM365_INT_IMX1_ENABLE,
+	DM365_INT_IMX1_DISABLE,
+	DM365_INT_NSF_ENABLE,
+	DM365_INT_NSF_DISABLE,
+
+	/* EDMA event muxing */
+	DM365_EVT2_ASP_TX,
+	DM365_EVT3_ASP_RX,
+	DM365_EVT26_MMC0_RX,
+};
+
+enum da830_index {
+	DA830_GPIO7_14,
+	DA830_RTCK,
+	DA830_GPIO7_15,
+	DA830_EMU_0,
+	DA830_EMB_SDCKE,
+	DA830_EMB_CLK_GLUE,
+	DA830_EMB_CLK,
+	DA830_NEMB_CS_0,
+	DA830_NEMB_CAS,
+	DA830_NEMB_RAS,
+	DA830_NEMB_WE,
+	DA830_EMB_BA_1,
+	DA830_EMB_BA_0,
+	DA830_EMB_A_0,
+	DA830_EMB_A_1,
+	DA830_EMB_A_2,
+	DA830_EMB_A_3,
+	DA830_EMB_A_4,
+	DA830_EMB_A_5,
+	DA830_GPIO7_0,
+	DA830_GPIO7_1,
+	DA830_GPIO7_2,
+	DA830_GPIO7_3,
+	DA830_GPIO7_4,
+	DA830_GPIO7_5,
+	DA830_GPIO7_6,
+	DA830_GPIO7_7,
+	DA830_EMB_A_6,
+	DA830_EMB_A_7,
+	DA830_EMB_A_8,
+	DA830_EMB_A_9,
+	DA830_EMB_A_10,
+	DA830_EMB_A_11,
+	DA830_EMB_A_12,
+	DA830_EMB_D_31,
+	DA830_GPIO7_8,
+	DA830_GPIO7_9,
+	DA830_GPIO7_10,
+	DA830_GPIO7_11,
+	DA830_GPIO7_12,
+	DA830_GPIO7_13,
+	DA830_GPIO3_13,
+	DA830_EMB_D_30,
+	DA830_EMB_D_29,
+	DA830_EMB_D_28,
+	DA830_EMB_D_27,
+	DA830_EMB_D_26,
+	DA830_EMB_D_25,
+	DA830_EMB_D_24,
+	DA830_EMB_D_23,
+	DA830_EMB_D_22,
+	DA830_EMB_D_21,
+	DA830_EMB_D_20,
+	DA830_EMB_D_19,
+	DA830_EMB_D_18,
+	DA830_EMB_D_17,
+	DA830_EMB_D_16,
+	DA830_NEMB_WE_DQM_3,
+	DA830_NEMB_WE_DQM_2,
+	DA830_EMB_D_0,
+	DA830_EMB_D_1,
+	DA830_EMB_D_2,
+	DA830_EMB_D_3,
+	DA830_EMB_D_4,
+	DA830_EMB_D_5,
+	DA830_EMB_D_6,
+	DA830_GPIO6_0,
+	DA830_GPIO6_1,
+	DA830_GPIO6_2,
+	DA830_GPIO6_3,
+	DA830_GPIO6_4,
+	DA830_GPIO6_5,
+	DA830_GPIO6_6,
+	DA830_EMB_D_7,
+	DA830_EMB_D_8,
+	DA830_EMB_D_9,
+	DA830_EMB_D_10,
+	DA830_EMB_D_11,
+	DA830_EMB_D_12,
+	DA830_EMB_D_13,
+	DA830_EMB_D_14,
+	DA830_GPIO6_7,
+	DA830_GPIO6_8,
+	DA830_GPIO6_9,
+	DA830_GPIO6_10,
+	DA830_GPIO6_11,
+	DA830_GPIO6_12,
+	DA830_GPIO6_13,
+	DA830_GPIO6_14,
+	DA830_EMB_D_15,
+	DA830_NEMB_WE_DQM_1,
+	DA830_NEMB_WE_DQM_0,
+	DA830_SPI0_SOMI_0,
+	DA830_SPI0_SIMO_0,
+	DA830_SPI0_CLK,
+	DA830_NSPI0_ENA,
+	DA830_NSPI0_SCS_0,
+	DA830_EQEP0I,
+	DA830_EQEP0S,
+	DA830_EQEP1I,
+	DA830_NUART0_CTS,
+	DA830_NUART0_RTS,
+	DA830_EQEP0A,
+	DA830_EQEP0B,
+	DA830_GPIO6_15,
+	DA830_GPIO5_14,
+	DA830_GPIO5_15,
+	DA830_GPIO5_0,
+	DA830_GPIO5_1,
+	DA830_GPIO5_2,
+	DA830_GPIO5_3,
+	DA830_GPIO5_4,
+	DA830_SPI1_SOMI_0,
+	DA830_SPI1_SIMO_0,
+	DA830_SPI1_CLK,
+	DA830_UART0_RXD,
+	DA830_UART0_TXD,
+	DA830_AXR1_10,
+	DA830_AXR1_11,
+	DA830_NSPI1_ENA,
+	DA830_I2C1_SCL,
+	DA830_I2C1_SDA,
+	DA830_EQEP1S,
+	DA830_I2C0_SDA,
+	DA830_I2C0_SCL,
+	DA830_UART2_RXD,
+	DA830_TM64P0_IN12,
+	DA830_TM64P0_OUT12,
+	DA830_GPIO5_5,
+	DA830_GPIO5_6,
+	DA830_GPIO5_7,
+	DA830_GPIO5_8,
+	DA830_GPIO5_9,
+	DA830_GPIO5_10,
+	DA830_GPIO5_11,
+	DA830_GPIO5_12,
+	DA830_NSPI1_SCS_0,
+	DA830_USB0_DRVVBUS,
+	DA830_AHCLKX0,
+	DA830_ACLKX0,
+	DA830_AFSX0,
+	DA830_AHCLKR0,
+	DA830_ACLKR0,
+	DA830_AFSR0,
+	DA830_UART2_TXD,
+	DA830_AHCLKX2,
+	DA830_ECAP0_APWM0,
+	DA830_RMII_MHZ_50_CLK,
+	DA830_ECAP1_APWM1,
+	DA830_USB_REFCLKIN,
+	DA830_GPIO5_13,
+	DA830_GPIO4_15,
+	DA830_GPIO2_11,
+	DA830_GPIO2_12,
+	DA830_GPIO2_13,
+	DA830_GPIO2_14,
+	DA830_GPIO2_15,
+	DA830_GPIO3_12,
+	DA830_AMUTE0,
+	DA830_AXR0_0,
+	DA830_AXR0_1,
+	DA830_AXR0_2,
+	DA830_AXR0_3,
+	DA830_AXR0_4,
+	DA830_AXR0_5,
+	DA830_AXR0_6,
+	DA830_RMII_TXD_0,
+	DA830_RMII_TXD_1,
+	DA830_RMII_TXEN,
+	DA830_RMII_CRS_DV,
+	DA830_RMII_RXD_0,
+	DA830_RMII_RXD_1,
+	DA830_RMII_RXER,
+	DA830_AFSR2,
+	DA830_ACLKX2,
+	DA830_AXR2_3,
+	DA830_AXR2_2,
+	DA830_AXR2_1,
+	DA830_AFSX2,
+	DA830_ACLKR2,
+	DA830_NRESETOUT,
+	DA830_GPIO3_0,
+	DA830_GPIO3_1,
+	DA830_GPIO3_2,
+	DA830_GPIO3_3,
+	DA830_GPIO3_4,
+	DA830_GPIO3_5,
+	DA830_GPIO3_6,
+	DA830_AXR0_7,
+	DA830_AXR0_8,
+	DA830_UART1_RXD,
+	DA830_UART1_TXD,
+	DA830_AXR0_11,
+	DA830_AHCLKX1,
+	DA830_ACLKX1,
+	DA830_AFSX1,
+	DA830_MDIO_CLK,
+	DA830_MDIO_D,
+	DA830_AXR0_9,
+	DA830_AXR0_10,
+	DA830_EPWM0B,
+	DA830_EPWM0A,
+	DA830_EPWMSYNCI,
+	DA830_AXR2_0,
+	DA830_EPWMSYNC0,
+	DA830_GPIO3_7,
+	DA830_GPIO3_8,
+	DA830_GPIO3_9,
+	DA830_GPIO3_10,
+	DA830_GPIO3_11,
+	DA830_GPIO3_14,
+	DA830_GPIO3_15,
+	DA830_GPIO4_10,
+	DA830_AHCLKR1,
+	DA830_ACLKR1,
+	DA830_AFSR1,
+	DA830_AMUTE1,
+	DA830_AXR1_0,
+	DA830_AXR1_1,
+	DA830_AXR1_2,
+	DA830_AXR1_3,
+	DA830_ECAP2_APWM2,
+	DA830_EHRPWMGLUETZ,
+	DA830_EQEP1A,
+	DA830_GPIO4_11,
+	DA830_GPIO4_12,
+	DA830_GPIO4_13,
+	DA830_GPIO4_14,
+	DA830_GPIO4_0,
+	DA830_GPIO4_1,
+	DA830_GPIO4_2,
+	DA830_GPIO4_3,
+	DA830_AXR1_4,
+	DA830_AXR1_5,
+	DA830_AXR1_6,
+	DA830_AXR1_7,
+	DA830_AXR1_8,
+	DA830_AXR1_9,
+	DA830_EMA_D_0,
+	DA830_EMA_D_1,
+	DA830_EQEP1B,
+	DA830_EPWM2B,
+	DA830_EPWM2A,
+	DA830_EPWM1B,
+	DA830_EPWM1A,
+	DA830_MMCSD_DAT_0,
+	DA830_MMCSD_DAT_1,
+	DA830_UHPI_HD_0,
+	DA830_UHPI_HD_1,
+	DA830_GPIO4_4,
+	DA830_GPIO4_5,
+	DA830_GPIO4_6,
+	DA830_GPIO4_7,
+	DA830_GPIO4_8,
+	DA830_GPIO4_9,
+	DA830_GPIO0_0,
+	DA830_GPIO0_1,
+	DA830_EMA_D_2,
+	DA830_EMA_D_3,
+	DA830_EMA_D_4,
+	DA830_EMA_D_5,
+	DA830_EMA_D_6,
+	DA830_EMA_D_7,
+	DA830_EMA_D_8,
+	DA830_EMA_D_9,
+	DA830_MMCSD_DAT_2,
+	DA830_MMCSD_DAT_3,
+	DA830_MMCSD_DAT_4,
+	DA830_MMCSD_DAT_5,
+	DA830_MMCSD_DAT_6,
+	DA830_MMCSD_DAT_7,
+	DA830_UHPI_HD_8,
+	DA830_UHPI_HD_9,
+	DA830_UHPI_HD_2,
+	DA830_UHPI_HD_3,
+	DA830_UHPI_HD_4,
+	DA830_UHPI_HD_5,
+	DA830_UHPI_HD_6,
+	DA830_UHPI_HD_7,
+	DA830_LCD_D_8,
+	DA830_LCD_D_9,
+	DA830_GPIO0_2,
+	DA830_GPIO0_3,
+	DA830_GPIO0_4,
+	DA830_GPIO0_5,
+	DA830_GPIO0_6,
+	DA830_GPIO0_7,
+	DA830_GPIO0_8,
+	DA830_GPIO0_9,
+	DA830_EMA_D_10,
+	DA830_EMA_D_11,
+	DA830_EMA_D_12,
+	DA830_EMA_D_13,
+	DA830_EMA_D_14,
+	DA830_EMA_D_15,
+	DA830_EMA_A_0,
+	DA830_EMA_A_1,
+	DA830_UHPI_HD_10,
+	DA830_UHPI_HD_11,
+	DA830_UHPI_HD_12,
+	DA830_UHPI_HD_13,
+	DA830_UHPI_HD_14,
+	DA830_UHPI_HD_15,
+	DA830_LCD_D_7,
+	DA830_MMCSD_CLK,
+	DA830_LCD_D_10,
+	DA830_LCD_D_11,
+	DA830_LCD_D_12,
+	DA830_LCD_D_13,
+	DA830_LCD_D_14,
+	DA830_LCD_D_15,
+	DA830_UHPI_HCNTL0,
+	DA830_GPIO0_10,
+	DA830_GPIO0_11,
+	DA830_GPIO0_12,
+	DA830_GPIO0_13,
+	DA830_GPIO0_14,
+	DA830_GPIO0_15,
+	DA830_GPIO1_0,
+	DA830_GPIO1_1,
+	DA830_EMA_A_2,
+	DA830_EMA_A_3,
+	DA830_EMA_A_4,
+	DA830_EMA_A_5,
+	DA830_EMA_A_6,
+	DA830_EMA_A_7,
+	DA830_EMA_A_8,
+	DA830_EMA_A_9,
+	DA830_MMCSD_CMD,
+	DA830_LCD_D_6,
+	DA830_LCD_D_3,
+	DA830_LCD_D_2,
+	DA830_LCD_D_1,
+	DA830_LCD_D_0,
+	DA830_LCD_PCLK,
+	DA830_LCD_HSYNC,
+	DA830_UHPI_HCNTL1,
+	DA830_GPIO1_2,
+	DA830_GPIO1_3,
+	DA830_GPIO1_4,
+	DA830_GPIO1_5,
+	DA830_GPIO1_6,
+	DA830_GPIO1_7,
+	DA830_GPIO1_8,
+	DA830_GPIO1_9,
+	DA830_EMA_A_10,
+	DA830_EMA_A_11,
+	DA830_EMA_A_12,
+	DA830_EMA_BA_1,
+	DA830_EMA_BA_0,
+	DA830_EMA_CLK,
+	DA830_EMA_SDCKE,
+	DA830_NEMA_CAS,
+	DA830_LCD_VSYNC,
+	DA830_NLCD_AC_ENB_CS,
+	DA830_LCD_MCLK,
+	DA830_LCD_D_5,
+	DA830_LCD_D_4,
+	DA830_OBSCLK,
+	DA830_NEMA_CS_4,
+	DA830_UHPI_HHWIL,
+	DA830_AHCLKR2,
+	DA830_GPIO1_10,
+	DA830_GPIO1_11,
+	DA830_GPIO1_12,
+	DA830_GPIO1_13,
+	DA830_GPIO1_14,
+	DA830_GPIO1_15,
+	DA830_GPIO2_0,
+	DA830_GPIO2_1,
+	DA830_NEMA_RAS,
+	DA830_NEMA_WE,
+	DA830_NEMA_CS_0,
+	DA830_NEMA_CS_2,
+	DA830_NEMA_CS_3,
+	DA830_NEMA_OE,
+	DA830_NEMA_WE_DQM_1,
+	DA830_NEMA_WE_DQM_0,
+	DA830_NEMA_CS_5,
+	DA830_UHPI_HRNW,
+	DA830_NUHPI_HAS,
+	DA830_NUHPI_HCS,
+	DA830_NUHPI_HDS1,
+	DA830_NUHPI_HDS2,
+	DA830_NUHPI_HINT,
+	DA830_AXR0_12,
+	DA830_AMUTE2,
+	DA830_AXR0_13,
+	DA830_AXR0_14,
+	DA830_AXR0_15,
+	DA830_GPIO2_2,
+	DA830_GPIO2_3,
+	DA830_GPIO2_4,
+	DA830_GPIO2_5,
+	DA830_GPIO2_6,
+	DA830_GPIO2_7,
+	DA830_GPIO2_8,
+	DA830_GPIO2_9,
+	DA830_EMA_WAIT_0,
+	DA830_NUHPI_HRDY,
+	DA830_GPIO2_10,
+};
+
+enum davinci_da850_index {
+	/* UART0 function */
+	DA850_NUART0_CTS,
+	DA850_NUART0_RTS,
+	DA850_UART0_RXD,
+	DA850_UART0_TXD,
+
+	/* UART1 function */
+	DA850_NUART1_CTS,
+	DA850_NUART1_RTS,
+	DA850_UART1_RXD,
+	DA850_UART1_TXD,
+
+	/* UART2 function */
+	DA850_NUART2_CTS,
+	DA850_NUART2_RTS,
+	DA850_UART2_RXD,
+	DA850_UART2_TXD,
+
+	/* I2C1 function */
+	DA850_I2C1_SCL,
+	DA850_I2C1_SDA,
+
+	/* I2C0 function */
+	DA850_I2C0_SDA,
+	DA850_I2C0_SCL,
+
+	/* EMAC function */
+	DA850_MII_TXEN,
+	DA850_MII_TXCLK,
+	DA850_MII_COL,
+	DA850_MII_TXD_3,
+	DA850_MII_TXD_2,
+	DA850_MII_TXD_1,
+	DA850_MII_TXD_0,
+	DA850_MII_RXER,
+	DA850_MII_CRS,
+	DA850_MII_RXCLK,
+	DA850_MII_RXDV,
+	DA850_MII_RXD_3,
+	DA850_MII_RXD_2,
+	DA850_MII_RXD_1,
+	DA850_MII_RXD_0,
+	DA850_MDIO_CLK,
+	DA850_MDIO_D,
+
+	/* McASP function */
+	DA850_ACLKR,
+	DA850_ACLKX,
+	DA850_AFSR,
+	DA850_AFSX,
+	DA850_AHCLKR,
+	DA850_AHCLKX,
+	DA850_AMUTE,
+	DA850_AXR_15,
+	DA850_AXR_14,
+	DA850_AXR_13,
+	DA850_AXR_12,
+	DA850_AXR_11,
+	DA850_AXR_10,
+	DA850_AXR_9,
+	DA850_AXR_8,
+	DA850_AXR_7,
+	DA850_AXR_6,
+	DA850_AXR_5,
+	DA850_AXR_4,
+	DA850_AXR_3,
+	DA850_AXR_2,
+	DA850_AXR_1,
+	DA850_AXR_0,
+
+	/* LCD function */
+	DA850_LCD_D_7,
+	DA850_LCD_D_6,
+	DA850_LCD_D_5,
+	DA850_LCD_D_4,
+	DA850_LCD_D_3,
+	DA850_LCD_D_2,
+	DA850_LCD_D_1,
+	DA850_LCD_D_0,
+	DA850_LCD_D_15,
+	DA850_LCD_D_14,
+	DA850_LCD_D_13,
+	DA850_LCD_D_12,
+	DA850_LCD_D_11,
+	DA850_LCD_D_10,
+	DA850_LCD_D_9,
+	DA850_LCD_D_8,
+	DA850_LCD_PCLK,
+	DA850_LCD_HSYNC,
+	DA850_LCD_VSYNC,
+	DA850_NLCD_AC_ENB_CS,
+
+	/* MMC/SD0 function */
+	DA850_MMCSD0_DAT_0,
+	DA850_MMCSD0_DAT_1,
+	DA850_MMCSD0_DAT_2,
+	DA850_MMCSD0_DAT_3,
+	DA850_MMCSD0_CLK,
+	DA850_MMCSD0_CMD,
+
+	/* EMIF2.5/EMIFA function */
+	DA850_EMA_D_7,
+	DA850_EMA_D_6,
+	DA850_EMA_D_5,
+	DA850_EMA_D_4,
+	DA850_EMA_D_3,
+	DA850_EMA_D_2,
+	DA850_EMA_D_1,
+	DA850_EMA_D_0,
+	DA850_EMA_A_1,
+	DA850_EMA_A_2,
+	DA850_NEMA_CS_3,
+	DA850_NEMA_CS_4,
+	DA850_NEMA_WE,
+	DA850_NEMA_OE,
+	DA850_EMA_D_15,
+	DA850_EMA_D_14,
+	DA850_EMA_D_13,
+	DA850_EMA_D_12,
+	DA850_EMA_D_11,
+	DA850_EMA_D_10,
+	DA850_EMA_D_9,
+	DA850_EMA_D_8,
+	DA850_EMA_A_0,
+	DA850_EMA_A_3,
+	DA850_EMA_A_4,
+	DA850_EMA_A_5,
+	DA850_EMA_A_6,
+	DA850_EMA_A_7,
+	DA850_EMA_A_8,
+	DA850_EMA_A_9,
+	DA850_EMA_A_10,
+	DA850_EMA_A_11,
+	DA850_EMA_A_12,
+	DA850_EMA_A_13,
+	DA850_EMA_A_14,
+	DA850_EMA_A_15,
+	DA850_EMA_A_16,
+	DA850_EMA_A_17,
+	DA850_EMA_A_18,
+	DA850_EMA_A_19,
+	DA850_EMA_A_20,
+	DA850_EMA_A_21,
+	DA850_EMA_A_22,
+	DA850_EMA_A_23,
+	DA850_EMA_BA_1,
+	DA850_EMA_CLK,
+	DA850_EMA_WAIT_1,
+	DA850_NEMA_CS_2,
+
+	/* GPIO function */
+	DA850_GPIO2_15,
+	DA850_GPIO8_10,
+	DA850_GPIO4_0,
+	DA850_GPIO4_1,
 };
 
 #ifdef CONFIG_DAVINCI_MUX

arch/arm/mach-davinci/include/mach/psc.h

@@ -81,6 +81,24 @@
 #define DM355_LPSC_RTO			12
 #define DM355_LPSC_VPSS_DAC		41
 
+/* DM365 */
+#define DM365_LPSC_TIMER3	5
+#define DM365_LPSC_SPI1		6
+#define DM365_LPSC_MMC_SD1	7
+#define DM365_LPSC_McBSP1	8
+#define DM365_LPSC_PWM3		10
+#define DM365_LPSC_SPI2		11
+#define DM365_LPSC_RTO		12
+#define DM365_LPSC_TIMER4	17
+#define DM365_LPSC_SPI0		22
+#define DM365_LPSC_SPI3		38
+#define DM365_LPSC_SPI4		39
+#define DM365_LPSC_EMAC		40
+#define DM365_LPSC_VOICE_CODEC	44
+#define DM365_LPSC_DAC_CLK	46
+#define DM365_LPSC_VPSSMSTR	47
+#define DM365_LPSC_MJCP		50
+
 /*
  * LPSC Assignments
  */
@@ -118,6 +136,50 @@
 #define DM646X_LPSC_TIMER1         35
 #define DM646X_LPSC_ARM_INTC       45
 
+/* PSC0 defines */
+#define DA8XX_LPSC0_TPCC		0
+#define DA8XX_LPSC0_TPTC0		1
+#define DA8XX_LPSC0_TPTC1		2
+#define DA8XX_LPSC0_EMIF25		3
+#define DA8XX_LPSC0_SPI0		4
+#define DA8XX_LPSC0_MMC_SD		5
+#define DA8XX_LPSC0_AINTC		6
+#define DA8XX_LPSC0_ARM_RAM_ROM		7
+#define DA8XX_LPSC0_SECU_MGR		8
+#define DA8XX_LPSC0_UART0		9
+#define DA8XX_LPSC0_SCR0_SS		10
+#define DA8XX_LPSC0_SCR1_SS		11
+#define DA8XX_LPSC0_SCR2_SS		12
+#define DA8XX_LPSC0_DMAX		13
+#define DA8XX_LPSC0_ARM			14
+#define DA8XX_LPSC0_GEM			15
+
+/* PSC1 defines */
+#define DA850_LPSC1_TPCC1		0
+#define DA8XX_LPSC1_USB20		1
+#define DA8XX_LPSC1_USB11		2
+#define DA8XX_LPSC1_GPIO		3
+#define DA8XX_LPSC1_UHPI		4
+#define DA8XX_LPSC1_CPGMAC		5
+#define DA8XX_LPSC1_EMIF3C		6
+#define DA8XX_LPSC1_McASP0		7
+#define DA830_LPSC1_McASP1		8
+#define DA850_LPSC1_SATA		8
+#define DA830_LPSC1_McASP2		9
+#define DA8XX_LPSC1_SPI1		10
+#define DA8XX_LPSC1_I2C			11
+#define DA8XX_LPSC1_UART1		12
+#define DA8XX_LPSC1_UART2		13
+#define DA8XX_LPSC1_LCDC		16
+#define DA8XX_LPSC1_PWM			17
+#define DA8XX_LPSC1_ECAP		20
+#define DA830_LPSC1_EQEP		21
+#define DA850_LPSC1_TPTC2		21
+#define DA8XX_LPSC1_SCR_P0_SS		24
+#define DA8XX_LPSC1_SCR_P1_SS		25
+#define DA8XX_LPSC1_CR_P3_SS		26
+#define DA8XX_LPSC1_L3_CBA_RAM		31
+
 extern int davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id);
 extern void davinci_psc_config(unsigned int domain, unsigned int ctlr,
 		unsigned int id, char enable);

arch/arm/mach-davinci/include/mach/serial.h

@@ -11,13 +11,17 @@
 #ifndef __ASM_ARCH_SERIAL_H
 #define __ASM_ARCH_SERIAL_H
 
-#include <mach/io.h>
+#include <mach/hardware.h>
 
 #define DAVINCI_MAX_NR_UARTS	3
 #define DAVINCI_UART0_BASE	(IO_PHYS + 0x20000)
 #define DAVINCI_UART1_BASE	(IO_PHYS + 0x20400)
 #define DAVINCI_UART2_BASE	(IO_PHYS + 0x20800)
 
+#define DA8XX_UART0_BASE	(IO_PHYS + 0x042000)
+#define DA8XX_UART1_BASE	(IO_PHYS + 0x10c000)
+#define DA8XX_UART2_BASE	(IO_PHYS + 0x10d000)
+
 /* DaVinci UART register offsets */
 #define UART_DAVINCI_PWREMU		0x0c
 #define UART_DM646X_SCR			0x10

arch/arm/mach-davinci/include/mach/system.h

@@ -16,12 +16,12 @@
 
 extern void davinci_watchdog_reset(void);
 
-static void arch_idle(void)
+static inline void arch_idle(void)
 {
 	cpu_do_idle();
 }
 
-static void arch_reset(char mode, const char *cmd)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	davinci_watchdog_reset();
 }

arch/arm/mach-davinci/include/mach/uncompress.h

@@ -21,8 +21,11 @@ static u32 *uart;
 
 static u32 *get_uart_base(void)
 {
-	/* Add logic here for new platforms, using __macine_arch_type */
-	return (u32 *)DAVINCI_UART0_BASE;
+	if (__machine_arch_type == MACH_TYPE_DAVINCI_DA830_EVM ||
+		__machine_arch_type == MACH_TYPE_DAVINCI_DA850_EVM)
+		return (u32 *)DA8XX_UART2_BASE;
+	else
+		return (u32 *)DAVINCI_UART0_BASE;
 }
 
 /* PORT_16C550A, in polled non-fifo mode */

arch/arm/mach-davinci/include/mach/vmalloc.h

@@ -8,7 +8,7 @@
  * is licensed "as is" without any warranty of any kind, whether express
  * or implied.
  */
-#include <mach/io.h>
+#include <mach/hardware.h>
 
 /* Allow vmalloc range until the IO virtual range minus a 2M "hole" */
 #define VMALLOC_END	  (IO_VIRT - (2<<20))

arch/arm/mach-davinci/mux.c

@@ -91,3 +91,17 @@ int __init_or_module davinci_cfg_reg(const unsigned long index)
 	return 0;
 }
 EXPORT_SYMBOL(davinci_cfg_reg);
+
+int da8xx_pinmux_setup(const short pins[])
+{
+	int i, error = -EINVAL;
+
+	if (pins)
+		for (i = 0; pins[i] >= 0; i++) {
+			error = davinci_cfg_reg(pins[i]);
+			if (error)
+				break;
+		}
+
+	return error;
+}

arch/arm/mach-davinci/sram.c

@@ -60,7 +60,7 @@ static int __init sram_init(void)
 	int status = 0;
 
 	if (len) {
-		len = min(len, SRAM_SIZE);
+		len = min_t(unsigned, len, SRAM_SIZE);
 		sram_pool = gen_pool_create(ilog2(SRAM_GRANULARITY), -1);
 		if (!sram_pool)
 			status = -ENOMEM;

arch/arm/mach-davinci/time.c

@@ -406,11 +406,11 @@ struct sys_timer davinci_timer = {
 void davinci_watchdog_reset(void)
 {
 	u32 tgcr, wdtcr;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	void __iomem *base = soc_info->wdt_base;
+	struct platform_device *pdev = &davinci_wdt_device;
+	void __iomem *base = IO_ADDRESS(pdev->resource[0].start);
 	struct clk *wd_clk;
 
-	wd_clk = clk_get(&davinci_wdt_device.dev, NULL);
+	wd_clk = clk_get(&pdev->dev, NULL);
 	if (WARN_ON(IS_ERR(wd_clk)))
 		return;
 	clk_enable(wd_clk);
@@ -420,11 +420,11 @@ void davinci_watchdog_reset(void)
 
 	/* reset timer, set mode to 64-bit watchdog, and unreset */
 	tgcr = 0;
-	__raw_writel(tgcr, base + TCR);
+	__raw_writel(tgcr, base + TGCR);
 	tgcr = TGCR_TIMMODE_64BIT_WDOG << TGCR_TIMMODE_SHIFT;
 	tgcr |= (TGCR_UNRESET << TGCR_TIM12RS_SHIFT) |
 		(TGCR_UNRESET << TGCR_TIM34RS_SHIFT);
-	__raw_writel(tgcr, base + TCR);
+	__raw_writel(tgcr, base + TGCR);
 
 	/* clear counter and period regs */
 	__raw_writel(0, base + TIM12);
@@ -432,12 +432,8 @@ void davinci_watchdog_reset(void)
 	__raw_writel(0, base + PRD12);
 	__raw_writel(0, base + PRD34);
 
-	/* enable */
-	wdtcr = __raw_readl(base + WDTCR);
-	wdtcr |= WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT;
-	__raw_writel(wdtcr, base + WDTCR);
-
 	/* put watchdog in pre-active state */
+	wdtcr = __raw_readl(base + WDTCR);
 	wdtcr = (WDTCR_WDKEY_SEQ0 << WDTCR_WDKEY_SHIFT) |
 		(WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT);
 	__raw_writel(wdtcr, base + WDTCR);

arch/arm/mach-davinci/usb.c

@@ -13,6 +13,7 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
+#include <mach/cputype.h>
 
 #define DAVINCI_USB_OTG_BASE 0x01C64000
 
@@ -64,6 +65,10 @@ static struct resource usb_resources[] = {
 		.start          = IRQ_USBINT,
 		.flags          = IORESOURCE_IRQ,
 	},
+	{
+		/* placeholder for the dedicated CPPI IRQ */
+		.flags          = IORESOURCE_IRQ,
+	},
 };
 
 static u64 usb_dmamask = DMA_BIT_MASK(32);
@@ -84,6 +89,14 @@ void __init setup_usb(unsigned mA, unsigned potpgt_msec)
 {
 	usb_data.power = mA / 2;
 	usb_data.potpgt = potpgt_msec / 2;
+
+	if (cpu_is_davinci_dm646x()) {
+		/* Override the defaults as DM6467 uses different IRQs. */
+		usb_dev.resource[1].start = IRQ_DM646X_USBINT;
+		usb_dev.resource[2].start = IRQ_DM646X_USBDMAINT;
+	} else	/* other devices don't have dedicated CPPI IRQ */
+		usb_dev.num_resources = 2;
+
 	platform_device_register(&usb_dev);
 }
 

arch/arm/mach-omap1/board-ams-delta.c

@@ -15,8 +15,11 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/input.h>
+#include <linux/interrupt.h>
 #include <linux/platform_device.h>
+#include <linux/serial_8250.h>
 
+#include <asm/serial.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -162,10 +165,6 @@ static struct omap_lcd_config ams_delta_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
-static struct omap_uart_config ams_delta_uart_config __initdata = {
-	.enabled_uarts = 1,
-};
-
 static struct omap_usb_config ams_delta_usb_config __initdata = {
 	.register_host	= 1,
 	.hmc_mode	= 16,
@@ -174,7 +173,6 @@ static struct omap_usb_config ams_delta_usb_config __initdata = {
 
 static struct omap_board_config_kernel ams_delta_config[] = {
 	{ OMAP_TAG_LCD,		&ams_delta_lcd_config },
-	{ OMAP_TAG_UART,	&ams_delta_uart_config },
 };
 
 static struct resource ams_delta_kp_resources[] = {
@@ -235,6 +233,41 @@ static void __init ams_delta_init(void)
 	platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
 }
 
+static struct plat_serial8250_port ams_delta_modem_ports[] = {
+	{
+		.membase	= (void *) AMS_DELTA_MODEM_VIRT,
+		.mapbase	= AMS_DELTA_MODEM_PHYS,
+		.irq		= -EINVAL, /* changed later */
+		.flags		= UPF_BOOT_AUTOCONF,
+		.irqflags	= IRQF_TRIGGER_RISING,
+		.iotype		= UPIO_MEM,
+		.regshift	= 1,
+		.uartclk	= BASE_BAUD * 16,
+	},
+	{ },
+};
+
+static struct platform_device ams_delta_modem_device = {
+	.name	= "serial8250",
+	.id	= PLAT8250_DEV_PLATFORM1,
+	.dev		= {
+		.platform_data = ams_delta_modem_ports,
+	},
+};
+
+static int __init ams_delta_modem_init(void)
+{
+	omap_cfg_reg(M14_1510_GPIO2);
+	ams_delta_modem_ports[0].irq = gpio_to_irq(2);
+
+	ams_delta_latch2_write(
+		AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC,
+		AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC);
+
+	return platform_device_register(&ams_delta_modem_device);
+}
+arch_initcall(ams_delta_modem_init);
+
 static void __init ams_delta_map_io(void)
 {
 	omap1_map_common_io();

arch/arm/mach-omap1/board-fsample.c

@@ -240,16 +240,11 @@ static int nand_dev_ready(struct omap_nand_platform_data *data)
 	return gpio_get_value(P2_NAND_RB_GPIO_PIN);
 }
 
-static struct omap_uart_config fsample_uart_config __initdata = {
-	.enabled_uarts = ((1 << 0) | (1 << 1)),
-};
-
 static struct omap_lcd_config fsample_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
 static struct omap_board_config_kernel fsample_config[] = {
-	{ OMAP_TAG_UART,	&fsample_uart_config },
 	{ OMAP_TAG_LCD,		&fsample_lcd_config },
 };
 

arch/arm/mach-omap1/board-generic.c

@@ -57,12 +57,7 @@ static struct omap_usb_config generic1610_usb_config __initdata = {
 };
 #endif
 
-static struct omap_uart_config generic_uart_config __initdata = {
-	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct omap_board_config_kernel generic_config[] __initdata = {
-	{ OMAP_TAG_UART,	&generic_uart_config },
 };
 
 static void __init omap_generic_init(void)

arch/arm/mach-omap1/board-h2.c

@@ -360,16 +360,11 @@ static struct omap_usb_config h2_usb_config __initdata = {
 	.pins[1]	= 3,
 };
 
-static struct omap_uart_config h2_uart_config __initdata = {
-	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct omap_lcd_config h2_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
 static struct omap_board_config_kernel h2_config[] __initdata = {
-	{ OMAP_TAG_UART,	&h2_uart_config },
 	{ OMAP_TAG_LCD,		&h2_lcd_config },
 };
 

arch/arm/mach-omap1/board-h3.c

@@ -313,16 +313,11 @@ static struct omap_usb_config h3_usb_config __initdata = {
 	.pins[1]	= 3,
 };
 
-static struct omap_uart_config h3_uart_config __initdata = {
-	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct omap_lcd_config h3_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
 static struct omap_board_config_kernel h3_config[] __initdata = {
-	{ OMAP_TAG_UART,	&h3_uart_config },
 	{ OMAP_TAG_LCD,		&h3_lcd_config },
 };
 

arch/arm/mach-omap1/board-innovator.c

@@ -368,13 +368,8 @@ static inline void innovator_mmc_init(void)
 }
 #endif
 
-static struct omap_uart_config innovator_uart_config __initdata = {
-	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct omap_board_config_kernel innovator_config[] = {
 	{ OMAP_TAG_LCD,		NULL },
-	{ OMAP_TAG_UART,	&innovator_uart_config },
 };
 
 static void __init innovator_init(void)

arch/arm/mach-omap1/board-osk.c

@@ -293,10 +293,6 @@ static struct omap_usb_config osk_usb_config __initdata = {
 	.pins[0]	= 2,
 };
 
-static struct omap_uart_config osk_uart_config __initdata = {
-	.enabled_uarts = (1 << 0),
-};
-
 #ifdef	CONFIG_OMAP_OSK_MISTRAL
 static struct omap_lcd_config osk_lcd_config __initdata = {
 	.ctrl_name	= "internal",
@@ -304,7 +300,6 @@ static struct omap_lcd_config osk_lcd_config __initdata = {
 #endif
 
 static struct omap_board_config_kernel osk_config[] __initdata = {
-	{ OMAP_TAG_UART,		&osk_uart_config },
 #ifdef	CONFIG_OMAP_OSK_MISTRAL
 	{ OMAP_TAG_LCD,			&osk_lcd_config },
 #endif

arch/arm/mach-omap1/board-palmte.c

@@ -212,10 +212,6 @@ static struct omap_lcd_config palmte_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
-static struct omap_uart_config palmte_uart_config __initdata = {
-	.enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2),
-};
-
 #ifdef CONFIG_APM
 /*
  * Values measured in 10 minute intervals averaged over 10 samples.
@@ -302,7 +298,6 @@ static void palmte_get_power_status(struct apm_power_info *info, int *battery)
 
 static struct omap_board_config_kernel palmte_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&palmte_lcd_config },
-	{ OMAP_TAG_UART,	&palmte_uart_config },
 };
 
 static struct spi_board_info palmte_spi_info[] __initdata = {

arch/arm/mach-omap1/board-palmtt.c

@@ -274,13 +274,8 @@ static struct omap_lcd_config palmtt_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
-static struct omap_uart_config palmtt_uart_config __initdata = {
-	.enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2),
-};
-
 static struct omap_board_config_kernel palmtt_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&palmtt_lcd_config	},
-	{ OMAP_TAG_UART,	&palmtt_uart_config	},
 };
 
 static void __init omap_mpu_wdt_mode(int mode) {

arch/arm/mach-omap1/board-palmz71.c

@@ -244,13 +244,8 @@ static struct omap_lcd_config palmz71_lcd_config __initdata = {
 	.ctrl_name = "internal",
 };
 
-static struct omap_uart_config palmz71_uart_config __initdata = {
-	.enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2),
-};
-
 static struct omap_board_config_kernel palmz71_config[] __initdata = {
 	{OMAP_TAG_LCD,	&palmz71_lcd_config},
-	{OMAP_TAG_UART,	&palmz71_uart_config},
 };
 
 static irqreturn_t

arch/arm/mach-omap1/board-perseus2.c

@@ -208,16 +208,11 @@ static int nand_dev_ready(struct omap_nand_platform_data *data)
 	return gpio_get_value(P2_NAND_RB_GPIO_PIN);
 }
 
-static struct omap_uart_config perseus2_uart_config __initdata = {
-	.enabled_uarts = ((1 << 0) | (1 << 1)),
-};
-
 static struct omap_lcd_config perseus2_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
 static struct omap_board_config_kernel perseus2_config[] __initdata = {
-	{ OMAP_TAG_UART,	&perseus2_uart_config },
 	{ OMAP_TAG_LCD,		&perseus2_lcd_config },
 };
 

arch/arm/mach-omap1/board-sx1.c

@@ -369,13 +369,8 @@ static struct platform_device *sx1_devices[] __initdata = {
 };
 /*-----------------------------------------*/
 
-static struct omap_uart_config sx1_uart_config __initdata = {
-	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct omap_board_config_kernel sx1_config[] __initdata = {
 	{ OMAP_TAG_LCD,	&sx1_lcd_config },
-	{ OMAP_TAG_UART,	&sx1_uart_config },
 };
 
 /*-----------------------------------------*/

arch/arm/mach-omap1/board-voiceblue.c

@@ -140,12 +140,7 @@ static struct omap_usb_config voiceblue_usb_config __initdata = {
 	.pins[2]	= 6,
 };
 
-static struct omap_uart_config voiceblue_uart_config __initdata = {
-	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct omap_board_config_kernel voiceblue_config[] = {
-	{ OMAP_TAG_UART, &voiceblue_uart_config },
 };
 
 static void __init voiceblue_init_irq(void)

arch/arm/mach-omap1/devices.c

@@ -71,7 +71,7 @@ static inline void omap_init_rtc(void) {}
 #  define INT_DSP_MAILBOX1	INT_1610_DSP_MAILBOX1
 #endif
 
-#define OMAP1_MBOX_BASE		IO_ADDRESS(OMAP16XX_MAILBOX_BASE)
+#define OMAP1_MBOX_BASE		OMAP1_IO_ADDRESS(OMAP16XX_MAILBOX_BASE)
 
 static struct resource mbox_resources[] = {
 	{

arch/arm/mach-omap1/io.c

@@ -29,9 +29,9 @@ extern void omapfb_reserve_sdram(void);
  */
 static struct map_desc omap_io_desc[] __initdata = {
 	{
-		.virtual	= IO_VIRT,
-		.pfn		= __phys_to_pfn(IO_PHYS),
-		.length		= IO_SIZE,
+		.virtual	= OMAP1_IO_VIRT,
+		.pfn		= __phys_to_pfn(OMAP1_IO_PHYS),
+		.length		= OMAP1_IO_SIZE,
 		.type		= MT_DEVICE
 	}
 };

arch/arm/mach-omap1/pm.h

@@ -39,11 +39,11 @@
  * Register and offset definitions to be used in PM assembler code
  * ----------------------------------------------------------------------------
  */
-#define CLKGEN_REG_ASM_BASE		IO_ADDRESS(0xfffece00)
+#define CLKGEN_REG_ASM_BASE		OMAP1_IO_ADDRESS(0xfffece00)
 #define ARM_IDLECT1_ASM_OFFSET		0x04
 #define ARM_IDLECT2_ASM_OFFSET		0x08
 
-#define TCMIF_ASM_BASE			IO_ADDRESS(0xfffecc00)
+#define TCMIF_ASM_BASE			OMAP1_IO_ADDRESS(0xfffecc00)
 #define EMIFS_CONFIG_ASM_OFFSET		0x0c
 #define EMIFF_SDRAM_CONFIG_ASM_OFFSET	0x20
 

arch/arm/mach-omap1/serial.c

@@ -64,7 +64,7 @@ static void __init omap_serial_reset(struct plat_serial8250_port *p)
 
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
-		.membase	= IO_ADDRESS(OMAP_UART1_BASE),
+		.membase	= OMAP1_IO_ADDRESS(OMAP_UART1_BASE),
 		.mapbase	= OMAP_UART1_BASE,
 		.irq		= INT_UART1,
 		.flags		= UPF_BOOT_AUTOCONF,
@@ -73,7 +73,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.uartclk	= OMAP16XX_BASE_BAUD * 16,
 	},
 	{
-		.membase	= IO_ADDRESS(OMAP_UART2_BASE),
+		.membase	= OMAP1_IO_ADDRESS(OMAP_UART2_BASE),
 		.mapbase	= OMAP_UART2_BASE,
 		.irq		= INT_UART2,
 		.flags		= UPF_BOOT_AUTOCONF,
@@ -82,7 +82,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.uartclk	= OMAP16XX_BASE_BAUD * 16,
 	},
 	{
-		.membase	= IO_ADDRESS(OMAP_UART3_BASE),
+		.membase	= OMAP1_IO_ADDRESS(OMAP_UART3_BASE),
 		.mapbase	= OMAP_UART3_BASE,
 		.irq		= INT_UART3,
 		.flags		= UPF_BOOT_AUTOCONF,
@@ -109,7 +109,6 @@ static struct platform_device serial_device = {
 void __init omap_serial_init(void)
 {
 	int i;
-	const struct omap_uart_config *info;
 
 	if (cpu_is_omap730()) {
 		serial_platform_data[0].regshift = 0;
@@ -131,19 +130,9 @@ void __init omap_serial_init(void)
 		serial_platform_data[2].uartclk = OMAP1510_BASE_BAUD * 16;
 	}
 
-	info = omap_get_config(OMAP_TAG_UART, struct omap_uart_config);
-	if (info == NULL)
-		return;
-
 	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
 		unsigned char reg;
 
-		if (!((1 << i) & info->enabled_uarts)) {
-			serial_platform_data[i].membase = NULL;
-			serial_platform_data[i].mapbase = 0;
-			continue;
-		}
-
 		switch (i) {
 		case 0:
 			uart1_ck = clk_get(NULL, "uart1_ck");

arch/arm/mach-omap1/sram.S

@@ -21,13 +21,13 @@
 ENTRY(omap1_sram_reprogram_clock)
 	stmfd	sp!, {r0 - r12, lr}		@ save registers on stack
 
-	mov	r2, #IO_ADDRESS(DPLL_CTL) & 0xff000000
-	orr	r2, r2, #IO_ADDRESS(DPLL_CTL) & 0x00ff0000
-	orr	r2, r2, #IO_ADDRESS(DPLL_CTL) & 0x0000ff00
+	mov	r2, #OMAP1_IO_ADDRESS(DPLL_CTL) & 0xff000000
+	orr	r2, r2, #OMAP1_IO_ADDRESS(DPLL_CTL) & 0x00ff0000
+	orr	r2, r2, #OMAP1_IO_ADDRESS(DPLL_CTL) & 0x0000ff00
 
-	mov	r3, #IO_ADDRESS(ARM_CKCTL) & 0xff000000
-	orr	r3, r3, #IO_ADDRESS(ARM_CKCTL) & 0x00ff0000
-	orr	r3, r3, #IO_ADDRESS(ARM_CKCTL) & 0x0000ff00
+	mov	r3, #OMAP1_IO_ADDRESS(ARM_CKCTL) & 0xff000000
+	orr	r3, r3, #OMAP1_IO_ADDRESS(ARM_CKCTL) & 0x00ff0000
+	orr	r3, r3, #OMAP1_IO_ADDRESS(ARM_CKCTL) & 0x0000ff00
 
 	tst	r0, #1 << 4			@ want lock mode?
 	beq	newck				@ nope

arch/arm/mach-omap1/time.c

@@ -62,8 +62,8 @@ typedef struct {
 	u32 read_tim;			/* READ_TIM,   R */
 } omap_mpu_timer_regs_t;
 
-#define omap_mpu_timer_base(n)						\
-((volatile omap_mpu_timer_regs_t*)IO_ADDRESS(OMAP_MPU_TIMER_BASE +	\
+#define omap_mpu_timer_base(n)							\
+((volatile omap_mpu_timer_regs_t*)OMAP1_IO_ADDRESS(OMAP_MPU_TIMER_BASE +	\
 				 (n)*OMAP_MPU_TIMER_OFFSET))
 
 static inline unsigned long omap_mpu_timer_read(int nr)

arch/arm/mach-omap2/Kconfig

@@ -31,6 +31,11 @@ config MACH_OMAP_GENERIC
 	bool "Generic OMAP board"
 	depends on ARCH_OMAP2 && ARCH_OMAP24XX
 
+config MACH_OMAP2_TUSB6010
+	bool
+	depends on ARCH_OMAP2 && ARCH_OMAP2420
+	default y if MACH_NOKIA_N8X0
+
 config MACH_OMAP_H4
 	bool "OMAP 2420 H4 board"
 	depends on ARCH_OMAP2 && ARCH_OMAP24XX
@@ -68,6 +73,10 @@ config MACH_OMAP_3430SDP
 	bool "OMAP 3430 SDP board"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
 
+config MACH_NOKIA_N8X0
+	bool "Nokia N800/N810"
+	depends on ARCH_OMAP2420
+
 config MACH_NOKIA_RX51
 	bool "Nokia RX-51 board"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX

arch/arm/mach-omap2/Makefile

@@ -5,7 +5,7 @@
 # Common support
 obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o
 
-omap-2-3-common				= irq.o sdrc.o
+omap-2-3-common				= irq.o sdrc.o omap_hwmod.o
 prcm-common				= prcm.o powerdomain.o
 clock-common				= clock.o clockdomain.o
 
@@ -35,6 +35,11 @@ obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o
 obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
 endif
 
+# PRCM
+obj-$(CONFIG_ARCH_OMAP2)		+= cm.o
+obj-$(CONFIG_ARCH_OMAP3)		+= cm.o
+obj-$(CONFIG_ARCH_OMAP4)		+= cm4xxx.o
+
 # Clock framework
 obj-$(CONFIG_ARCH_OMAP2)		+= clock24xx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= clock34xx.o
@@ -62,7 +67,7 @@ obj-$(CONFIG_MACH_OMAP3_PANDORA)	+= board-omap3pandora.o \
 					   mmc-twl4030.o
 obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o \
 					   mmc-twl4030.o
-
+obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0.o
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o \
 					   board-rx51-peripherals.o \
 					   mmc-twl4030.o
@@ -74,6 +79,7 @@ obj-$(CONFIG_MACH_OMAP_4430SDP)		+= board-4430sdp.o
 
 # Platform specific device init code
 obj-y					+= usb-musb.o
+obj-$(CONFIG_MACH_OMAP2_TUSB6010)	+= usb-tusb6010.o
 
 onenand-$(CONFIG_MTD_ONENAND_OMAP2)	:= gpmc-onenand.o
 obj-y					+= $(onenand-m) $(onenand-y)

arch/arm/mach-omap2/board-2430sdp.c

@@ -139,23 +139,19 @@ static inline void board_smc91x_init(void)
 
 #endif
 
+static struct omap_board_config_kernel sdp2430_config[] = {
+	{OMAP_TAG_LCD, &sdp2430_lcd_config},
+};
+
 static void __init omap_2430sdp_init_irq(void)
 {
+	omap_board_config = sdp2430_config;
+	omap_board_config_size = ARRAY_SIZE(sdp2430_config);
 	omap2_init_common_hw(NULL, NULL);
 	omap_init_irq();
 	omap_gpio_init();
 }
 
-static struct omap_uart_config sdp2430_uart_config __initdata = {
-	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
-static struct omap_board_config_kernel sdp2430_config[] = {
-	{OMAP_TAG_UART, &sdp2430_uart_config},
-	{OMAP_TAG_LCD, &sdp2430_lcd_config},
-};
-
-
 static struct twl4030_gpio_platform_data sdp2430_gpio_data = {
 	.gpio_base	= OMAP_MAX_GPIO_LINES,
 	.irq_base	= TWL4030_GPIO_IRQ_BASE,
@@ -205,8 +201,6 @@ static void __init omap_2430sdp_init(void)
 	omap2430_i2c_init();
 
 	platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
-	omap_board_config = sdp2430_config;
-	omap_board_config_size = ARRAY_SIZE(sdp2430_config);
 	omap_serial_init();
 	twl4030_mmc_init(mmc);
 	usb_musb_init();

arch/arm/mach-omap2/board-3430sdp.c

@@ -167,26 +167,23 @@ static struct platform_device *sdp3430_devices[] __initdata = {
 	&sdp3430_lcd_device,
 };
 
-static void __init omap_3430sdp_init_irq(void)
-{
-	omap2_init_common_hw(hyb18m512160af6_sdrc_params, NULL);
-	omap_init_irq();
-	omap_gpio_init();
-}
-
-static struct omap_uart_config sdp3430_uart_config __initdata = {
-	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct omap_lcd_config sdp3430_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
 static struct omap_board_config_kernel sdp3430_config[] __initdata = {
-	{ OMAP_TAG_UART,	&sdp3430_uart_config },
 	{ OMAP_TAG_LCD,		&sdp3430_lcd_config },
 };
 
+static void __init omap_3430sdp_init_irq(void)
+{
+	omap_board_config = sdp3430_config;
+	omap_board_config_size = ARRAY_SIZE(sdp3430_config);
+	omap2_init_common_hw(hyb18m512160af6_sdrc_params, NULL);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
 static int sdp3430_batt_table[] = {
 /* 0 C*/
 30800, 29500, 28300, 27100,
@@ -478,12 +475,15 @@ static inline void board_smc91x_init(void)
 
 #endif
 
+static void enable_board_wakeup_source(void)
+{
+	omap_cfg_reg(AF26_34XX_SYS_NIRQ); /* T2 interrupt line (keypad) */
+}
+
 static void __init omap_3430sdp_init(void)
 {
 	omap3430_i2c_init();
 	platform_add_devices(sdp3430_devices, ARRAY_SIZE(sdp3430_devices));
-	omap_board_config = sdp3430_config;
-	omap_board_config_size = ARRAY_SIZE(sdp3430_config);
 	if (omap_rev() > OMAP3430_REV_ES1_0)
 		ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV2;
 	else
@@ -495,6 +495,7 @@ static void __init omap_3430sdp_init(void)
 	omap_serial_init();
 	usb_musb_init();
 	board_smc91x_init();
+	enable_board_wakeup_source();
 }
 
 static void __init omap_3430sdp_map_io(void)

arch/arm/mach-omap2/board-4430sdp.c

@@ -47,14 +47,13 @@ static struct omap_lcd_config sdp4430_lcd_config __initdata = {
 };
 
 static struct omap_board_config_kernel sdp4430_config[] __initdata = {
-	{ OMAP_TAG_UART,	&sdp4430_uart_config },
 	{ OMAP_TAG_LCD,		&sdp4430_lcd_config },
 };
 
 static void __init gic_init_irq(void)
 {
-	gic_dist_init(0, IO_ADDRESS(OMAP44XX_GIC_DIST_BASE), 29);
-	gic_cpu_init(0, IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
+	gic_dist_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_DIST_BASE), 29);
+	gic_cpu_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
 }
 
 static void __init omap_4430sdp_init_irq(void)

arch/arm/mach-omap2/board-apollon.c

@@ -248,18 +248,6 @@ out:
 	clk_put(gpmc_fck);
 }
 
-static void __init omap_apollon_init_irq(void)
-{
-	omap2_init_common_hw(NULL, NULL);
-	omap_init_irq();
-	omap_gpio_init();
-	apollon_init_smc91x();
-}
-
-static struct omap_uart_config apollon_uart_config __initdata = {
-	.enabled_uarts = (1 << 0) | (0 << 1) | (0 << 2),
-};
-
 static struct omap_usb_config apollon_usb_config __initdata = {
 	.register_dev	= 1,
 	.hmc_mode	= 0x14,	/* 0:dev 1:host1 2:disable */
@@ -272,10 +260,19 @@ static struct omap_lcd_config apollon_lcd_config __initdata = {
 };
 
 static struct omap_board_config_kernel apollon_config[] = {
-	{ OMAP_TAG_UART,	&apollon_uart_config },
 	{ OMAP_TAG_LCD,		&apollon_lcd_config },
 };
 
+static void __init omap_apollon_init_irq(void)
+{
+	omap_board_config = apollon_config;
+	omap_board_config_size = ARRAY_SIZE(apollon_config);
+	omap2_init_common_hw(NULL, NULL);
+	omap_init_irq();
+	omap_gpio_init();
+	apollon_init_smc91x();
+}
+
 static void __init apollon_led_init(void)
 {
 	/* LED0 - AA10 */
@@ -324,8 +321,6 @@ static void __init omap_apollon_init(void)
 	 * if not needed.
 	 */
 	platform_add_devices(apollon_devices, ARRAY_SIZE(apollon_devices));
-	omap_board_config = apollon_config;
-	omap_board_config_size = ARRAY_SIZE(apollon_config);
 	omap_serial_init();
 }
 

arch/arm/mach-omap2/board-generic.c

@@ -31,24 +31,19 @@
 #include <mach/board.h>
 #include <mach/common.h>
 
+static struct omap_board_config_kernel generic_config[] = {
+};
+
 static void __init omap_generic_init_irq(void)
 {
+	omap_board_config = generic_config;
+	omap_board_config_size = ARRAY_SIZE(generic_config);
 	omap2_init_common_hw(NULL, NULL);
 	omap_init_irq();
 }
 
-static struct omap_uart_config generic_uart_config __initdata = {
-	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
-static struct omap_board_config_kernel generic_config[] = {
-	{ OMAP_TAG_UART,	&generic_uart_config },
-};
-
 static void __init omap_generic_init(void)
 {
-	omap_board_config = generic_config;
-	omap_board_config_size = ARRAY_SIZE(generic_config);
 	omap_serial_init();
 }
 

arch/arm/mach-omap2/board-h4.c

@@ -268,18 +268,6 @@ static void __init h4_init_flash(void)
 	h4_flash_resource.end	= base + SZ_64M - 1;
 }
 
-static void __init omap_h4_init_irq(void)
-{
-	omap2_init_common_hw(NULL, NULL);
-	omap_init_irq();
-	omap_gpio_init();
-	h4_init_flash();
-}
-
-static struct omap_uart_config h4_uart_config __initdata = {
-	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct omap_lcd_config h4_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
@@ -318,10 +306,19 @@ static struct omap_usb_config h4_usb_config __initdata = {
 };
 
 static struct omap_board_config_kernel h4_config[] = {
-	{ OMAP_TAG_UART,	&h4_uart_config },
 	{ OMAP_TAG_LCD,		&h4_lcd_config },
 };
 
+static void __init omap_h4_init_irq(void)
+{
+	omap_board_config = h4_config;
+	omap_board_config_size = ARRAY_SIZE(h4_config);
+	omap2_init_common_hw(NULL, NULL);
+	omap_init_irq();
+	omap_gpio_init();
+	h4_init_flash();
+}
+
 static struct at24_platform_data m24c01 = {
 	.byte_len	= SZ_1K / 8,
 	.page_size	= 16,
@@ -366,8 +363,6 @@ static void __init omap_h4_init(void)
 			ARRAY_SIZE(h4_i2c_board_info));
 
 	platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices));
-	omap_board_config = h4_config;
-	omap_board_config_size = ARRAY_SIZE(h4_config);
 	omap_usb_init(&h4_usb_config);
 	omap_serial_init();
 }

arch/arm/mach-omap2/board-ldp.c

@@ -268,18 +268,6 @@ static inline void __init ldp_init_smsc911x(void)
 	gpio_direction_input(eth_gpio);
 }
 
-static void __init omap_ldp_init_irq(void)
-{
-	omap2_init_common_hw(NULL, NULL);
-	omap_init_irq();
-	omap_gpio_init();
-	ldp_init_smsc911x();
-}
-
-static struct omap_uart_config ldp_uart_config __initdata = {
-	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct platform_device ldp_lcd_device = {
 	.name		= "ldp_lcd",
 	.id		= -1,
@@ -290,10 +278,19 @@ static struct omap_lcd_config ldp_lcd_config __initdata = {
 };
 
 static struct omap_board_config_kernel ldp_config[] __initdata = {
-	{ OMAP_TAG_UART,	&ldp_uart_config },
 	{ OMAP_TAG_LCD,		&ldp_lcd_config },
 };
 
+static void __init omap_ldp_init_irq(void)
+{
+	omap_board_config = ldp_config;
+	omap_board_config_size = ARRAY_SIZE(ldp_config);
+	omap2_init_common_hw(NULL, NULL);
+	omap_init_irq();
+	omap_gpio_init();
+	ldp_init_smsc911x();
+}
+
 static struct twl4030_usb_data ldp_usb_data = {
 	.usb_mode	= T2_USB_MODE_ULPI,
 };
@@ -377,8 +374,6 @@ static void __init omap_ldp_init(void)
 {
 	omap_i2c_init();
 	platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));
-	omap_board_config = ldp_config;
-	omap_board_config_size = ARRAY_SIZE(ldp_config);
 	ts_gpio = 54;
 	ldp_spi_board_info[0].irq = gpio_to_irq(ts_gpio);
 	spi_register_board_info(ldp_spi_board_info,

arch/arm/mach-omap2/board-n8x0.c

@@ -0,0 +1,150 @@
+/*
+ * linux/arch/arm/mach-omap2/board-n8x0.c
+ *
+ * Copyright (C) 2005-2009 Nokia Corporation
+ * Author: Juha Yrjola <juha.yrjola@nokia.com>
+ *
+ * Modified from mach-omap2/board-generic.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/stddef.h>
+#include <linux/spi/spi.h>
+#include <linux/usb/musb.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/irqs.h>
+#include <mach/mcspi.h>
+#include <mach/onenand.h>
+#include <mach/serial.h>
+
+static struct omap2_mcspi_device_config p54spi_mcspi_config = {
+	.turbo_mode	= 0,
+	.single_channel = 1,
+};
+
+static struct spi_board_info n800_spi_board_info[] __initdata = {
+	{
+		.modalias	= "p54spi",
+		.bus_num	= 2,
+		.chip_select	= 0,
+		.max_speed_hz   = 48000000,
+		.controller_data = &p54spi_mcspi_config,
+	},
+};
+
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+
+static struct mtd_partition onenand_partitions[] = {
+	{
+		.name           = "bootloader",
+		.offset         = 0,
+		.size           = 0x20000,
+		.mask_flags     = MTD_WRITEABLE,	/* Force read-only */
+	},
+	{
+		.name           = "config",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 0x60000,
+	},
+	{
+		.name           = "kernel",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 0x200000,
+	},
+	{
+		.name           = "initfs",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 0x400000,
+	},
+	{
+		.name           = "rootfs",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct omap_onenand_platform_data board_onenand_data = {
+	.cs		= 0,
+	.gpio_irq	= 26,
+	.parts		= onenand_partitions,
+	.nr_parts	= ARRAY_SIZE(onenand_partitions),
+	.flags		= ONENAND_SYNC_READ,
+};
+
+static void __init n8x0_onenand_init(void)
+{
+	gpmc_onenand_init(&board_onenand_data);
+}
+
+#else
+
+static void __init n8x0_onenand_init(void) {}
+
+#endif
+
+static void __init n8x0_map_io(void)
+{
+	omap2_set_globals_242x();
+	omap2_map_common_io();
+}
+
+static void __init n8x0_init_irq(void)
+{
+	omap2_init_common_hw(NULL, NULL);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
+static void __init n8x0_init_machine(void)
+{
+	/* FIXME: add n810 spi devices */
+	spi_register_board_info(n800_spi_board_info,
+				ARRAY_SIZE(n800_spi_board_info));
+
+	omap_serial_init();
+	n8x0_onenand_init();
+}
+
+MACHINE_START(NOKIA_N800, "Nokia N800")
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= n8x0_map_io,
+	.init_irq	= n8x0_init_irq,
+	.init_machine	= n8x0_init_machine,
+	.timer		= &omap_timer,
+MACHINE_END
+
+MACHINE_START(NOKIA_N810, "Nokia N810")
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= n8x0_map_io,
+	.init_irq	= n8x0_init_irq,
+	.init_machine	= n8x0_init_machine,
+	.timer		= &omap_timer,
+MACHINE_END
+
+MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= n8x0_map_io,
+	.init_irq	= n8x0_init_irq,
+	.init_machine	= n8x0_init_machine,
+	.timer		= &omap_timer,
+MACHINE_END

arch/arm/mach-omap2/board-omap3beagle.c

@@ -108,10 +108,6 @@ static struct platform_device omap3beagle_nand_device = {
 
 #include "sdram-micron-mt46h32m32lf-6.h"
 
-static struct omap_uart_config omap3_beagle_uart_config __initdata = {
-	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct twl4030_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
@@ -249,11 +245,16 @@ static struct regulator_init_data beagle_vpll2 = {
 	.consumer_supplies	= &beagle_vdvi_supply,
 };
 
+static struct twl4030_usb_data beagle_usb_data = {
+	.usb_mode	= T2_USB_MODE_ULPI,
+};
+
 static struct twl4030_platform_data beagle_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
 
 	/* platform_data for children goes here */
+	.usb		= &beagle_usb_data,
 	.gpio		= &beagle_gpio_data,
 	.vmmc1		= &beagle_vmmc1,
 	.vsim		= &beagle_vsim,
@@ -280,17 +281,6 @@ static int __init omap3_beagle_i2c_init(void)
 	return 0;
 }
 
-static void __init omap3_beagle_init_irq(void)
-{
-	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
-			     mt46h32m32lf6_sdrc_params);
-	omap_init_irq();
-#ifdef CONFIG_OMAP_32K_TIMER
-	omap2_gp_clockevent_set_gptimer(12);
-#endif
-	omap_gpio_init();
-}
-
 static struct gpio_led gpio_leds[] = {
 	{
 		.name			= "beagleboard::usr0",
@@ -345,10 +335,22 @@ static struct platform_device keys_gpio = {
 };
 
 static struct omap_board_config_kernel omap3_beagle_config[] __initdata = {
-	{ OMAP_TAG_UART,	&omap3_beagle_uart_config },
 	{ OMAP_TAG_LCD,		&omap3_beagle_lcd_config },
 };
 
+static void __init omap3_beagle_init_irq(void)
+{
+	omap_board_config = omap3_beagle_config;
+	omap_board_config_size = ARRAY_SIZE(omap3_beagle_config);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+			     mt46h32m32lf6_sdrc_params);
+	omap_init_irq();
+#ifdef CONFIG_OMAP_32K_TIMER
+	omap2_gp_clockevent_set_gptimer(12);
+#endif
+	omap_gpio_init();
+}
+
 static struct platform_device *omap3_beagle_devices[] __initdata = {
 	&omap3_beagle_lcd_device,
 	&leds_gpio,
@@ -398,8 +400,6 @@ static void __init omap3_beagle_init(void)
 	omap3_beagle_i2c_init();
 	platform_add_devices(omap3_beagle_devices,
 			ARRAY_SIZE(omap3_beagle_devices));
-	omap_board_config = omap3_beagle_config;
-	omap_board_config_size = ARRAY_SIZE(omap3_beagle_config);
 	omap_serial_init();
 
 	omap_cfg_reg(J25_34XX_GPIO170);

arch/arm/mach-omap2/board-omap3evm.c

@@ -92,10 +92,6 @@ static inline void __init omap3evm_init_smc911x(void)
 	gpio_direction_input(OMAP3EVM_ETHR_GPIO_IRQ);
 }
 
-static struct omap_uart_config omap3_evm_uart_config __initdata = {
-	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct twl4030_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
@@ -278,19 +274,20 @@ struct spi_board_info omap3evm_spi_board_info[] = {
 	},
 };
 
+static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
+	{ OMAP_TAG_LCD,		&omap3_evm_lcd_config },
+};
+
 static void __init omap3_evm_init_irq(void)
 {
+	omap_board_config = omap3_evm_config;
+	omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
 	omap2_init_common_hw(mt46h32m32lf6_sdrc_params, NULL);
 	omap_init_irq();
 	omap_gpio_init();
 	omap3evm_init_smc911x();
 }
 
-static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
-	{ OMAP_TAG_UART,	&omap3_evm_uart_config },
-	{ OMAP_TAG_LCD,		&omap3_evm_lcd_config },
-};
-
 static struct platform_device *omap3_evm_devices[] __initdata = {
 	&omap3_evm_lcd_device,
 	&omap3evm_smc911x_device,
@@ -301,8 +298,6 @@ static void __init omap3_evm_init(void)
 	omap3_evm_i2c_init();
 
 	platform_add_devices(omap3_evm_devices, ARRAY_SIZE(omap3_evm_devices));
-	omap_board_config = omap3_evm_config;
-	omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
 
 	spi_register_board_info(omap3evm_spi_board_info,
 				ARRAY_SIZE(omap3evm_spi_board_info));

arch/arm/mach-omap2/board-omap3pandora.c

@@ -213,10 +213,6 @@ static struct twl4030_hsmmc_info omap3pandora_mmc[] = {
 	{}	/* Terminator */
 };
 
-static struct omap_uart_config omap3pandora_uart_config __initdata = {
-	.enabled_uarts	= (1 << 2), /* UART3 */
-};
-
 static struct regulator_consumer_supply pandora_vmmc1_supply = {
 	.supply			= "vmmc",
 };
@@ -309,14 +305,6 @@ static int __init omap3pandora_i2c_init(void)
 	return 0;
 }
 
-static void __init omap3pandora_init_irq(void)
-{
-	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
-			     mt46h32m32lf6_sdrc_params);
-	omap_init_irq();
-	omap_gpio_init();
-}
-
 static void __init omap3pandora_ads7846_init(void)
 {
 	int gpio = OMAP3_PANDORA_TS_GPIO;
@@ -376,10 +364,19 @@ static struct omap_lcd_config omap3pandora_lcd_config __initdata = {
 };
 
 static struct omap_board_config_kernel omap3pandora_config[] __initdata = {
-	{ OMAP_TAG_UART,	&omap3pandora_uart_config },
 	{ OMAP_TAG_LCD,		&omap3pandora_lcd_config },
 };
 
+static void __init omap3pandora_init_irq(void)
+{
+	omap_board_config = omap3pandora_config;
+	omap_board_config_size = ARRAY_SIZE(omap3pandora_config);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+			     mt46h32m32lf6_sdrc_params);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
 static struct platform_device *omap3pandora_devices[] __initdata = {
 	&omap3pandora_lcd_device,
 	&pandora_leds_gpio,
@@ -391,8 +388,6 @@ static void __init omap3pandora_init(void)
 	omap3pandora_i2c_init();
 	platform_add_devices(omap3pandora_devices,
 			ARRAY_SIZE(omap3pandora_devices));
-	omap_board_config = omap3pandora_config;
-	omap_board_config_size = ARRAY_SIZE(omap3pandora_config);
 	omap_serial_init();
 	spi_register_board_info(omap3pandora_spi_board_info,
 			ARRAY_SIZE(omap3pandora_spi_board_info));

arch/arm/mach-omap2/board-overo.c

@@ -271,9 +271,6 @@ static void __init overo_flash_init(void)
 			printk(KERN_ERR "Unable to register NAND device\n");
 	}
 }
-static struct omap_uart_config overo_uart_config __initdata = {
-	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
-};
 
 static struct twl4030_hsmmc_info mmc[] = {
 	{
@@ -360,14 +357,6 @@ static int __init overo_i2c_init(void)
 	return 0;
 }
 
-static void __init overo_init_irq(void)
-{
-	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
-			     mt46h32m32lf6_sdrc_params);
-	omap_init_irq();
-	omap_gpio_init();
-}
-
 static struct platform_device overo_lcd_device = {
 	.name		= "overo_lcd",
 	.id		= -1,
@@ -378,10 +367,19 @@ static struct omap_lcd_config overo_lcd_config __initdata = {
 };
 
 static struct omap_board_config_kernel overo_config[] __initdata = {
-	{ OMAP_TAG_UART,	&overo_uart_config },
 	{ OMAP_TAG_LCD,		&overo_lcd_config },
 };
 
+static void __init overo_init_irq(void)
+{
+	omap_board_config = overo_config;
+	omap_board_config_size = ARRAY_SIZE(overo_config);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+			     mt46h32m32lf6_sdrc_params);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
 static struct platform_device *overo_devices[] __initdata = {
 	&overo_lcd_device,
 };
@@ -390,8 +388,6 @@ static void __init overo_init(void)
 {
 	overo_i2c_init();
 	platform_add_devices(overo_devices, ARRAY_SIZE(overo_devices));
-	omap_board_config = overo_config;
-	omap_board_config_size = ARRAY_SIZE(overo_config);
 	omap_serial_init();
 	overo_flash_init();
 	usb_musb_init();

arch/arm/mach-omap2/board-rx51-peripherals.c

@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-omap2/board-rx51-flash.c
+ * linux/arch/arm/mach-omap2/board-rx51-peripherals.c
  *
  * Copyright (C) 2008-2009 Nokia
  *
@@ -282,7 +282,124 @@ static struct twl4030_usb_data rx51_usb_data = {
 	.usb_mode		= T2_USB_MODE_ULPI,
 };
 
-static struct twl4030_platform_data rx51_twldata = {
+static struct twl4030_ins sleep_on_seq[] __initdata = {
+/*
+ * Turn off VDD1 and VDD2.
+ */
+	{MSG_SINGULAR(DEV_GRP_P1, 0xf, RES_STATE_OFF), 4},
+	{MSG_SINGULAR(DEV_GRP_P1, 0x10, RES_STATE_OFF), 2},
+/*
+ * And also turn off the OMAP3 PLLs and the sysclk output.
+ */
+	{MSG_SINGULAR(DEV_GRP_P1, 0x7, RES_STATE_OFF), 3},
+	{MSG_SINGULAR(DEV_GRP_P1, 0x17, RES_STATE_OFF), 3},
+};
+
+static struct twl4030_script sleep_on_script __initdata = {
+	.script = sleep_on_seq,
+	.size   = ARRAY_SIZE(sleep_on_seq),
+	.flags  = TWL4030_SLEEP_SCRIPT,
+};
+
+static struct twl4030_ins wakeup_seq[] __initdata = {
+/*
+ * Reenable the OMAP3 PLLs.
+ * Wakeup VDD1 and VDD2.
+ * Reenable sysclk output.
+ */
+	{MSG_SINGULAR(DEV_GRP_P1, 0x7, RES_STATE_ACTIVE), 0x30},
+	{MSG_SINGULAR(DEV_GRP_P1, 0xf, RES_STATE_ACTIVE), 0x30},
+	{MSG_SINGULAR(DEV_GRP_P1, 0x10, RES_STATE_ACTIVE), 0x37},
+	{MSG_SINGULAR(DEV_GRP_P1, 0x19, RES_STATE_ACTIVE), 3},
+};
+
+static struct twl4030_script wakeup_script __initdata = {
+	.script	= wakeup_seq,
+	.size	= ARRAY_SIZE(wakeup_seq),
+	.flags	= TWL4030_WAKEUP12_SCRIPT,
+};
+
+static struct twl4030_ins wakeup_p3_seq[] __initdata = {
+/*
+ * Wakeup VDD1 (dummy to be able to insert a delay)
+ * Enable CLKEN
+ */
+	{MSG_SINGULAR(DEV_GRP_P1, 0x17, RES_STATE_ACTIVE), 3},
+};
+
+static struct twl4030_script wakeup_p3_script __initdata = {
+	.script	= wakeup_p3_seq,
+	.size	= ARRAY_SIZE(wakeup_p3_seq),
+	.flags	= TWL4030_WAKEUP3_SCRIPT,
+};
+
+static struct twl4030_ins wrst_seq[] __initdata = {
+/*
+ * Reset twl4030.
+ * Reset VDD1 regulator.
+ * Reset VDD2 regulator.
+ * Reset VPLL1 regulator.
+ * Enable sysclk output.
+ * Reenable twl4030.
+ */
+	{MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_OFF), 2},
+	{MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 0, 1, RES_STATE_ACTIVE),
+		0x13},
+	{MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_PP, 0, 2, RES_STATE_WRST), 0x13},
+	{MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_PP, 0, 3, RES_STATE_OFF), 0x13},
+	{MSG_SINGULAR(DEV_GRP_NULL, RES_VDD1, RES_STATE_WRST), 0x13},
+	{MSG_SINGULAR(DEV_GRP_NULL, RES_VDD2, RES_STATE_WRST), 0x13},
+	{MSG_SINGULAR(DEV_GRP_NULL, RES_VPLL1, RES_STATE_WRST), 0x35},
+	{MSG_SINGULAR(DEV_GRP_P1, RES_HFCLKOUT, RES_STATE_ACTIVE), 2},
+	{MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_ACTIVE), 2},
+};
+
+static struct twl4030_script wrst_script __initdata = {
+	.script = wrst_seq,
+	.size   = ARRAY_SIZE(wrst_seq),
+	.flags  = TWL4030_WRST_SCRIPT,
+};
+
+static struct twl4030_script *twl4030_scripts[] __initdata = {
+	/* wakeup12 script should be loaded before sleep script, otherwise a
+	   board might hit retention before loading of wakeup script is
+	   completed. This can cause boot failures depending on timing issues.
+	*/
+	&wakeup_script,
+	&sleep_on_script,
+	&wakeup_p3_script,
+	&wrst_script,
+};
+
+static struct twl4030_resconfig twl4030_rconfig[] __initdata = {
+	{ .resource = RES_VINTANA1, .devgroup = -1, .type = -1, .type2 = 1 },
+	{ .resource = RES_VINTANA2, .devgroup = -1, .type = -1, .type2 = 1 },
+	{ .resource = RES_VINTDIG, .devgroup = -1, .type = -1, .type2 = 1 },
+	{ .resource = RES_VMMC1, .devgroup = -1, .type = -1, .type2 = 3},
+	{ .resource = RES_VMMC2, .devgroup = DEV_GRP_NULL, .type = -1,
+	  .type2 = 3},
+	{ .resource = RES_VAUX1, .devgroup = -1, .type = -1, .type2 = 3},
+	{ .resource = RES_VAUX2, .devgroup = -1, .type = -1, .type2 = 3},
+	{ .resource = RES_VAUX3, .devgroup = -1, .type = -1, .type2 = 3},
+	{ .resource = RES_VAUX4, .devgroup = -1, .type = -1, .type2 = 3},
+	{ .resource = RES_VPLL2, .devgroup = -1, .type = -1, .type2 = 3},
+	{ .resource = RES_VDAC, .devgroup = -1, .type = -1, .type2 = 3},
+	{ .resource = RES_VSIM, .devgroup = DEV_GRP_NULL, .type = -1,
+	  .type2 = 3},
+	{ .resource = RES_CLKEN, .devgroup = DEV_GRP_P3, .type = -1,
+		.type2 = 1 },
+	{ 0, 0},
+};
+
+static struct twl4030_power_data rx51_t2scripts_data __initdata = {
+	.scripts        = twl4030_scripts,
+	.num = ARRAY_SIZE(twl4030_scripts),
+	.resource_config = twl4030_rconfig,
+};
+
+
+
+static struct twl4030_platform_data rx51_twldata __initdata = {
 	.irq_base		= TWL4030_IRQ_BASE,
 	.irq_end		= TWL4030_IRQ_END,
 
@@ -291,6 +408,7 @@ static struct twl4030_platform_data rx51_twldata = {
 	.keypad			= &rx51_kp_data,
 	.madc			= &rx51_madc_data,
 	.usb			= &rx51_usb_data,
+	.power			= &rx51_t2scripts_data,
 
 	.vaux1			= &rx51_vaux1,
 	.vaux2			= &rx51_vaux2,

arch/arm/mach-omap2/board-rx51.c

@@ -31,10 +31,6 @@
 #include <mach/gpmc.h>
 #include <mach/usb.h>
 
-static struct omap_uart_config rx51_uart_config = {
-	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct omap_lcd_config rx51_lcd_config = {
 	.ctrl_name	= "internal",
 };
@@ -52,7 +48,6 @@ static struct omap_fbmem_config rx51_fbmem2_config = {
 };
 
 static struct omap_board_config_kernel rx51_config[] = {
-	{ OMAP_TAG_UART,	&rx51_uart_config },
 	{ OMAP_TAG_FBMEM,	&rx51_fbmem0_config },
 	{ OMAP_TAG_FBMEM,	&rx51_fbmem1_config },
 	{ OMAP_TAG_FBMEM,	&rx51_fbmem2_config },
@@ -61,6 +56,8 @@ static struct omap_board_config_kernel rx51_config[] = {
 
 static void __init rx51_init_irq(void)
 {
+	omap_board_config = rx51_config;
+	omap_board_config_size = ARRAY_SIZE(rx51_config);
 	omap2_init_common_hw(NULL, NULL);
 	omap_init_irq();
 	omap_gpio_init();
@@ -70,8 +67,6 @@ extern void __init rx51_peripherals_init(void);
 
 static void __init rx51_init(void)
 {
-	omap_board_config = rx51_config;
-	omap_board_config_size = ARRAY_SIZE(rx51_config);
 	omap_serial_init();
 	usb_musb_init();
 	rx51_peripherals_init();

arch/arm/mach-omap2/board-zoom-debugboard.c

@@ -12,6 +12,7 @@
 #include <linux/gpio.h>
 #include <linux/serial_8250.h>
 #include <linux/smsc911x.h>
+#include <linux/interrupt.h>
 
 #include <mach/gpmc.h>
 
@@ -84,6 +85,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.mapbase	= 0x10000000,
 		.irq		= OMAP_GPIO_IRQ(102),
 		.flags		= UPF_BOOT_AUTOCONF|UPF_IOREMAP|UPF_SHARE_IRQ,
+		.irqflags	= IRQF_SHARED | IRQF_TRIGGER_RISING,
 		.iotype		= UPIO_MEM,
 		.regshift	= 1,
 		.uartclk	= QUART_CLK,
@@ -94,7 +96,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 
 static struct platform_device zoom2_debugboard_serial_device = {
 	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM1,
+	.id			= 3,
 	.dev			= {
 		.platform_data	= serial_platform_data,
 	},
@@ -127,6 +129,7 @@ static inline void __init zoom2_init_quaduart(void)
 static inline int omap_zoom2_debugboard_detect(void)
 {
 	int debug_board_detect = 0;
+	int ret = 1;
 
 	debug_board_detect = ZOOM2_SMSC911X_GPIO;
 
@@ -138,10 +141,10 @@ static inline int omap_zoom2_debugboard_detect(void)
 	gpio_direction_input(debug_board_detect);
 
 	if (!gpio_get_value(debug_board_detect)) {
-		gpio_free(debug_board_detect);
-		return 0;
+		ret = 0;
 	}
-	return 1;
+	gpio_free(debug_board_detect);
+	return ret;
 }
 
 static struct platform_device *zoom2_devices[] __initdata = {

arch/arm/mach-omap2/board-zoom2.c

@@ -12,36 +12,217 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/input.h>
 #include <linux/gpio.h>
 #include <linux/i2c/twl4030.h>
+#include <linux/regulator/machine.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
 #include <mach/common.h>
 #include <mach/usb.h>
+#include <mach/keypad.h>
 
 #include "mmc-twl4030.h"
 
-static void __init omap_zoom2_init_irq(void)
+/* Zoom2 has Qwerty keyboard*/
+static int zoom2_twl4030_keymap[] = {
+	KEY(0, 0, KEY_E),
+	KEY(1, 0, KEY_R),
+	KEY(2, 0, KEY_T),
+	KEY(3, 0, KEY_HOME),
+	KEY(6, 0, KEY_I),
+	KEY(7, 0, KEY_LEFTSHIFT),
+	KEY(0, 1, KEY_D),
+	KEY(1, 1, KEY_F),
+	KEY(2, 1, KEY_G),
+	KEY(3, 1, KEY_SEND),
+	KEY(6, 1, KEY_K),
+	KEY(7, 1, KEY_ENTER),
+	KEY(0, 2, KEY_X),
+	KEY(1, 2, KEY_C),
+	KEY(2, 2, KEY_V),
+	KEY(3, 2, KEY_END),
+	KEY(6, 2, KEY_DOT),
+	KEY(7, 2, KEY_CAPSLOCK),
+	KEY(0, 3, KEY_Z),
+	KEY(1, 3, KEY_KPPLUS),
+	KEY(2, 3, KEY_B),
+	KEY(3, 3, KEY_F1),
+	KEY(6, 3, KEY_O),
+	KEY(7, 3, KEY_SPACE),
+	KEY(0, 4, KEY_W),
+	KEY(1, 4, KEY_Y),
+	KEY(2, 4, KEY_U),
+	KEY(3, 4, KEY_F2),
+	KEY(4, 4, KEY_VOLUMEUP),
+	KEY(6, 4, KEY_L),
+	KEY(7, 4, KEY_LEFT),
+	KEY(0, 5, KEY_S),
+	KEY(1, 5, KEY_H),
+	KEY(2, 5, KEY_J),
+	KEY(3, 5, KEY_F3),
+	KEY(5, 5, KEY_VOLUMEDOWN),
+	KEY(6, 5, KEY_M),
+	KEY(4, 5, KEY_ENTER),
+	KEY(7, 5, KEY_RIGHT),
+	KEY(0, 6, KEY_Q),
+	KEY(1, 6, KEY_A),
+	KEY(2, 6, KEY_N),
+	KEY(3, 6, KEY_BACKSPACE),
+	KEY(6, 6, KEY_P),
+	KEY(7, 6, KEY_UP),
+	KEY(6, 7, KEY_SELECT),
+	KEY(7, 7, KEY_DOWN),
+	KEY(0, 7, KEY_PROG1),	/*MACRO 1 <User defined> */
+	KEY(1, 7, KEY_PROG2),	/*MACRO 2 <User defined> */
+	KEY(2, 7, KEY_PROG3),	/*MACRO 3 <User defined> */
+	KEY(3, 7, KEY_PROG4),	/*MACRO 4 <User defined> */
+	0
+};
+
+static struct twl4030_keypad_data zoom2_kp_twl4030_data = {
+	.rows		= 8,
+	.cols		= 8,
+	.keymap		= zoom2_twl4030_keymap,
+	.keymapsize	= ARRAY_SIZE(zoom2_twl4030_keymap),
+	.rep		= 1,
+};
+
+static struct omap_board_config_kernel zoom2_config[] __initdata = {
+};
+
+static struct regulator_consumer_supply zoom2_vmmc1_supply = {
+	.supply		= "vmmc",
+};
+
+static struct regulator_consumer_supply zoom2_vsim_supply = {
+	.supply		= "vmmc_aux",
+};
+
+static struct regulator_consumer_supply zoom2_vmmc2_supply = {
+	.supply		= "vmmc",
+};
+
+/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
+static struct regulator_init_data zoom2_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = 1,
+	.consumer_supplies      = &zoom2_vmmc1_supply,
+};
+
+/* VMMC2 for MMC2 card */
+static struct regulator_init_data zoom2_vmmc2 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 1850000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = 1,
+	.consumer_supplies      = &zoom2_vmmc2_supply,
+};
+
+/* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
+static struct regulator_init_data zoom2_vsim = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 3000000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = 1,
+	.consumer_supplies      = &zoom2_vsim_supply,
+};
+
+static struct twl4030_hsmmc_info mmc[] __initdata = {
+	{
+		.mmc		= 1,
+		.wires		= 4,
+		.gpio_wp	= -EINVAL,
+	},
+	{
+		.mmc		= 2,
+		.wires		= 4,
+		.gpio_wp	= -EINVAL,
+	},
+	{}      /* Terminator */
+};
+
+static int zoom2_twl_gpio_setup(struct device *dev,
+		unsigned gpio, unsigned ngpio)
 {
-	omap2_init_common_hw(NULL, NULL);
-	omap_init_irq();
-	omap_gpio_init();
+	/* gpio + 0 is "mmc0_cd" (input/IRQ),
+	 * gpio + 1 is "mmc1_cd" (input/IRQ)
+	 */
+	mmc[0].gpio_cd = gpio + 0;
+	mmc[1].gpio_cd = gpio + 1;
+	twl4030_mmc_init(mmc);
+
+	/* link regulators to MMC adapters ... we "know" the
+	 * regulators will be set up only *after* we return.
+	*/
+	zoom2_vmmc1_supply.dev = mmc[0].dev;
+	zoom2_vsim_supply.dev = mmc[0].dev;
+	zoom2_vmmc2_supply.dev = mmc[1].dev;
+
+	return 0;
 }
 
-static struct omap_uart_config zoom2_uart_config __initdata = {
-	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
+
+static int zoom2_batt_table[] = {
+/* 0 C*/
+30800, 29500, 28300, 27100,
+26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
+17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
+11600, 11200, 10800, 10400, 10000, 9630,  9280,  8950,  8620,  8310,
+8020,  7730,  7460,  7200,  6950,  6710,  6470,  6250,  6040,  5830,
+5640,  5450,  5260,  5090,  4920,  4760,  4600,  4450,  4310,  4170,
+4040,  3910,  3790,  3670,  3550
 };
 
-static struct omap_board_config_kernel zoom2_config[] __initdata = {
-	{ OMAP_TAG_UART,	&zoom2_uart_config },
+static struct twl4030_bci_platform_data zoom2_bci_data = {
+	.battery_tmp_tbl	= zoom2_batt_table,
+	.tblsize		= ARRAY_SIZE(zoom2_batt_table),
 };
 
+static struct twl4030_usb_data zoom2_usb_data = {
+	.usb_mode	= T2_USB_MODE_ULPI,
+};
+
+static void __init omap_zoom2_init_irq(void)
+{
+	omap_board_config = zoom2_config;
+	omap_board_config_size = ARRAY_SIZE(zoom2_config);
+	omap2_init_common_hw(NULL, NULL);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
 static struct twl4030_gpio_platform_data zoom2_gpio_data = {
 	.gpio_base	= OMAP_MAX_GPIO_LINES,
 	.irq_base	= TWL4030_GPIO_IRQ_BASE,
 	.irq_end	= TWL4030_GPIO_IRQ_END,
+	.setup		= zoom2_twl_gpio_setup,
+};
+
+static struct twl4030_madc_platform_data zoom2_madc_data = {
+	.irq_line	= 1,
 };
 
 static struct twl4030_platform_data zoom2_twldata = {
@@ -49,7 +230,15 @@ static struct twl4030_platform_data zoom2_twldata = {
 	.irq_end	= TWL4030_IRQ_END,
 
 	/* platform_data for children goes here */
+	.bci		= &zoom2_bci_data,
+	.madc		= &zoom2_madc_data,
+	.usb		= &zoom2_usb_data,
 	.gpio		= &zoom2_gpio_data,
+	.keypad		= &zoom2_kp_twl4030_data,
+	.vmmc1          = &zoom2_vmmc1,
+	.vmmc2          = &zoom2_vmmc2,
+	.vsim           = &zoom2_vsim,
+
 };
 
 static struct i2c_board_info __initdata zoom2_i2c_boardinfo[] = {
@@ -70,26 +259,13 @@ static int __init omap_i2c_init(void)
 	return 0;
 }
 
-static struct twl4030_hsmmc_info mmc[] __initdata = {
-	{
-		.mmc		= 1,
-		.wires		= 4,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-	},
-	{}	/* Terminator */
-};
-
 extern int __init omap_zoom2_debugboard_init(void);
 
 static void __init omap_zoom2_init(void)
 {
 	omap_i2c_init();
-	omap_board_config = zoom2_config;
-	omap_board_config_size = ARRAY_SIZE(zoom2_config);
 	omap_serial_init();
 	omap_zoom2_debugboard_init();
-	twl4030_mmc_init(mmc);
 	usb_musb_init();
 }