Merge branch 'depends/clk/clk-next' into next/clock

Mike Turquette <mturquette@ti.com> has asked me to take the clock
changes through the arm-soc tree while there are still so many
inderdependencies, so this is the entire branch.

* depends/clk/clk-next: (30 commits)
  clk: add a fixed factor clock
  clk: mux: assign init data
  clk: remove COMMON_CLK_DISABLE_UNUSED
  clk: prevent spurious parent rate propagation
  MAINTAINERS: add entry for common clk framework
  clk: clk_set_rate() must fail if CLK_SET_RATE_GATE is set and clk is enabled
  clk: Use a separate struct for holding init data.
  clk: constify parent name arrays in macros
  clk: remove trailing whitespace from clk.h
  clk: select CLKDEV_LOOKUP for COMMON_CLK
  clk: Don't set clk->new_rate twice
  clk: clk-private: Add DEFINE_CLK macro
  clk: clk-gate: Create clk_gate_endisable()
  clk: Fix typo in comment
  clk: propagate round_rate for CLK_SET_RATE_PARENT case
  clk: pass parent_rate into .set_rate
  clk: always pass parent_rate into .round_rate
  clk: basic: improve parent_names & return errors
  clk: core: copy parent_names & return error codes
  clk: Constify parent name arrays
  ...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

MAINTAINERS

@@ -1882,6 +1882,16 @@ F:	Documentation/filesystems/coda.txt
 F:	fs/coda/
 F:	include/linux/coda*.h
 
+COMMON CLK FRAMEWORK
+M:	Mike Turquette <mturquette@ti.com>
+M:	Mike Turquette <mturquette@linaro.org>
+L:	linux-arm-kernel@lists.infradead.org (same as CLK API & CLKDEV)
+T:	git git://git.linaro.org/people/mturquette/linux.git
+S:	Maintained
+F:	drivers/clk/clk.c
+F:	drivers/clk/clk-*
+F:	include/linux/clk-pr*
+
 COMMON INTERNET FILE SYSTEM (CIFS)
 M:	Steve French <sfrench@samba.org>
 L:	linux-cifs@vger.kernel.org

drivers/clk/Kconfig

@@ -12,6 +12,7 @@ config HAVE_MACH_CLKDEV
 config COMMON_CLK
 	bool
 	select HAVE_CLK_PREPARE
+	select CLKDEV_LOOKUP
 	---help---
 	  The common clock framework is a single definition of struct
 	  clk, useful across many platforms, as well as an
@@ -22,17 +23,6 @@ config COMMON_CLK
 menu "Common Clock Framework"
 	depends on COMMON_CLK
 
-config COMMON_CLK_DISABLE_UNUSED
-	bool "Disabled unused clocks at boot"
-	depends on COMMON_CLK
-	---help---
-	  Traverses the entire clock tree and disables any clocks that are
-	  enabled in hardware but have not been enabled by any device drivers.
-	  This saves power and keeps the software model of the clock in line
-	  with reality.
-
-	  If in doubt, say "N".
-
 config COMMON_CLK_DEBUG
 	bool "DebugFS representation of clock tree"
 	depends on COMMON_CLK

drivers/clk/Makefile

@@ -1,4 +1,4 @@
 
 obj-$(CONFIG_CLKDEV_LOOKUP)	+= clkdev.o
 obj-$(CONFIG_COMMON_CLK)	+= clk.o clk-fixed-rate.o clk-gate.o \
-				   clk-mux.o clk-divider.o
+				   clk-mux.o clk-divider.o clk-fixed-factor.o

drivers/clk/clk-divider.c

@@ -45,7 +45,6 @@ static unsigned long clk_divider_recalc_rate(struct clk_hw *hw,
 
 	return parent_rate / div;
 }
-EXPORT_SYMBOL_GPL(clk_divider_recalc_rate);
 
 /*
  * The reverse of DIV_ROUND_UP: The maximum number which
@@ -68,8 +67,8 @@ static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate,
 	if (divider->flags & CLK_DIVIDER_ONE_BASED)
 		maxdiv--;
 
-	if (!best_parent_rate) {
-		parent_rate = __clk_get_rate(__clk_get_parent(hw->clk));
+	if (!(__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT)) {
+		parent_rate = *best_parent_rate;
 		bestdiv = DIV_ROUND_UP(parent_rate, rate);
 		bestdiv = bestdiv == 0 ? 1 : bestdiv;
 		bestdiv = bestdiv > maxdiv ? maxdiv : bestdiv;
@@ -109,24 +108,18 @@ static long clk_divider_round_rate(struct clk_hw *hw, unsigned long rate,
 	int div;
 	div = clk_divider_bestdiv(hw, rate, prate);
 
-	if (prate)
-		return *prate / div;
-	else {
-		unsigned long r;
-		r = __clk_get_rate(__clk_get_parent(hw->clk));
-		return r / div;
-	}
+	return *prate / div;
 }
-EXPORT_SYMBOL_GPL(clk_divider_round_rate);
 
-static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate)
+static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long parent_rate)
 {
 	struct clk_divider *divider = to_clk_divider(hw);
 	unsigned int div;
 	unsigned long flags = 0;
 	u32 val;
 
-	div = __clk_get_rate(__clk_get_parent(hw->clk)) / rate;
+	div = parent_rate / rate;
 
 	if (!(divider->flags & CLK_DIVIDER_ONE_BASED))
 		div--;
@@ -147,15 +140,26 @@ static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate)
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(clk_divider_set_rate);
 
-struct clk_ops clk_divider_ops = {
+const struct clk_ops clk_divider_ops = {
 	.recalc_rate = clk_divider_recalc_rate,
 	.round_rate = clk_divider_round_rate,
 	.set_rate = clk_divider_set_rate,
 };
 EXPORT_SYMBOL_GPL(clk_divider_ops);
 
+/**
+ * clk_register_divider - register a divider clock with the clock framework
+ * @dev: device registering this clock
+ * @name: name of this clock
+ * @parent_name: name of clock's parent
+ * @flags: framework-specific flags
+ * @reg: register address to adjust divider
+ * @shift: number of bits to shift the bitfield
+ * @width: width of the bitfield
+ * @clk_divider_flags: divider-specific flags for this clock
+ * @lock: shared register lock for this clock
+ */
 struct clk *clk_register_divider(struct device *dev, const char *name,
 		const char *parent_name, unsigned long flags,
 		void __iomem *reg, u8 shift, u8 width,
@@ -163,38 +167,34 @@ struct clk *clk_register_divider(struct device *dev, const char *name,
 {
 	struct clk_divider *div;
 	struct clk *clk;
+	struct clk_init_data init;
 
+	/* allocate the divider */
 	div = kzalloc(sizeof(struct clk_divider), GFP_KERNEL);
-
 	if (!div) {
 		pr_err("%s: could not allocate divider clk\n", __func__);
-		return NULL;
+		return ERR_PTR(-ENOMEM);
 	}
 
+	init.name = name;
+	init.ops = &clk_divider_ops;
+	init.flags = flags;
+	init.parent_names = (parent_name ? &parent_name: NULL);
+	init.num_parents = (parent_name ? 1 : 0);
+
 	/* struct clk_divider assignments */
 	div->reg = reg;
 	div->shift = shift;
 	div->width = width;
 	div->flags = clk_divider_flags;
 	div->lock = lock;
+	div->hw.init = &init;
 
-	if (parent_name) {
-		div->parent[0] = kstrdup(parent_name, GFP_KERNEL);
-		if (!div->parent[0])
-			goto out;
-	}
-
-	clk = clk_register(dev, name,
-			&clk_divider_ops, &div->hw,
-			div->parent,
-			(parent_name ? 1 : 0),
-			flags);
-	if (clk)
-		return clk;
+	/* register the clock */
+	clk = clk_register(dev, &div->hw);
 
-out:
-	kfree(div->parent[0]);
-	kfree(div);
+	if (IS_ERR(clk))
+		kfree(div);
 
-	return NULL;
+	return clk;
 }

drivers/clk/clk-fixed-factor.c

@@ -0,0 +1,95 @@
+/*
+ * Copyright (C) 2011 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Standard functionality for the common clock API.
+ */
+#include <linux/module.h>
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+
+/*
+ * DOC: basic fixed multiplier and divider clock that cannot gate
+ *
+ * Traits of this clock:
+ * prepare - clk_prepare only ensures that parents are prepared
+ * enable - clk_enable only ensures that parents are enabled
+ * rate - rate is fixed.  clk->rate = parent->rate / div * mult
+ * parent - fixed parent.  No clk_set_parent support
+ */
+
+#define to_clk_fixed_factor(_hw) container_of(_hw, struct clk_fixed_factor, hw)
+
+static unsigned long clk_factor_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct clk_fixed_factor *fix = to_clk_fixed_factor(hw);
+
+	return parent_rate * fix->mult / fix->div;
+}
+
+static long clk_factor_round_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long *prate)
+{
+	struct clk_fixed_factor *fix = to_clk_fixed_factor(hw);
+
+	if (__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT) {
+		unsigned long best_parent;
+
+		best_parent = (rate / fix->mult) * fix->div;
+		*prate = __clk_round_rate(__clk_get_parent(hw->clk),
+				best_parent);
+	}
+
+	return (*prate / fix->div) * fix->mult;
+}
+
+static int clk_factor_set_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long parent_rate)
+{
+	return 0;
+}
+
+struct clk_ops clk_fixed_factor_ops = {
+	.round_rate = clk_factor_round_rate,
+	.set_rate = clk_factor_set_rate,
+	.recalc_rate = clk_factor_recalc_rate,
+};
+EXPORT_SYMBOL_GPL(clk_fixed_factor_ops);
+
+struct clk *clk_register_fixed_factor(struct device *dev, const char *name,
+		const char *parent_name, unsigned long flags,
+		unsigned int mult, unsigned int div)
+{
+	struct clk_fixed_factor *fix;
+	struct clk_init_data init;
+	struct clk *clk;
+
+	fix = kmalloc(sizeof(*fix), GFP_KERNEL);
+	if (!fix) {
+		pr_err("%s: could not allocate fixed factor clk\n", __func__);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	/* struct clk_fixed_factor assignments */
+	fix->mult = mult;
+	fix->div = div;
+	fix->hw.init = &init;
+
+	init.name = name;
+	init.ops = &clk_fixed_factor_ops;
+	init.flags = flags;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	clk = clk_register(dev, &fix->hw);
+
+	if (IS_ERR(clk))
+		kfree(fix);
+
+	return clk;
+}

drivers/clk/clk-fixed-rate.c

@@ -32,51 +32,50 @@ static unsigned long clk_fixed_rate_recalc_rate(struct clk_hw *hw,
 {
 	return to_clk_fixed_rate(hw)->fixed_rate;
 }
-EXPORT_SYMBOL_GPL(clk_fixed_rate_recalc_rate);
 
-struct clk_ops clk_fixed_rate_ops = {
+const struct clk_ops clk_fixed_rate_ops = {
 	.recalc_rate = clk_fixed_rate_recalc_rate,
 };
 EXPORT_SYMBOL_GPL(clk_fixed_rate_ops);
 
+/**
+ * clk_register_fixed_rate - register fixed-rate clock with the clock framework
+ * @dev: device that is registering this clock
+ * @name: name of this clock
+ * @parent_name: name of clock's parent
+ * @flags: framework-specific flags
+ * @fixed_rate: non-adjustable clock rate
+ */
 struct clk *clk_register_fixed_rate(struct device *dev, const char *name,
 		const char *parent_name, unsigned long flags,
 		unsigned long fixed_rate)
 {
 	struct clk_fixed_rate *fixed;
-	char **parent_names = NULL;
-	u8 len;
+	struct clk *clk;
+	struct clk_init_data init;
 
+	/* allocate fixed-rate clock */
 	fixed = kzalloc(sizeof(struct clk_fixed_rate), GFP_KERNEL);
-
 	if (!fixed) {
 		pr_err("%s: could not allocate fixed clk\n", __func__);
 		return ERR_PTR(-ENOMEM);
 	}
 
+	init.name = name;
+	init.ops = &clk_fixed_rate_ops;
+	init.flags = flags;
+	init.parent_names = (parent_name ? &parent_name: NULL);
+	init.num_parents = (parent_name ? 1 : 0);
+
 	/* struct clk_fixed_rate assignments */
 	fixed->fixed_rate = fixed_rate;
+	fixed->hw.init = &init;
 
-	if (parent_name) {
-		parent_names = kmalloc(sizeof(char *), GFP_KERNEL);
-
-		if (! parent_names)
-			goto out;
+	/* register the clock */
+	clk = clk_register(dev, &fixed->hw);
 
-		len = sizeof(char) * strlen(parent_name);
-
-		parent_names[0] = kmalloc(len, GFP_KERNEL);
-
-		if (!parent_names[0])
-			goto out;
-
-		strncpy(parent_names[0], parent_name, len);
-	}
+	if (IS_ERR(clk))
+		kfree(fixed);
 
-out:
-	return clk_register(dev, name,
-			&clk_fixed_rate_ops, &fixed->hw,
-			parent_names,
-			(parent_name ? 1 : 0),
-			flags);
+	return clk;
 }

drivers/clk/clk-gate.c

@@ -28,32 +28,38 @@
 
 #define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw)
 
-static void clk_gate_set_bit(struct clk_gate *gate)
+/*
+ * It works on following logic:
+ *
+ * For enabling clock, enable = 1
+ *	set2dis = 1	-> clear bit	-> set = 0
+ *	set2dis = 0	-> set bit	-> set = 1
+ *
+ * For disabling clock, enable = 0
+ *	set2dis = 1	-> set bit	-> set = 1
+ *	set2dis = 0	-> clear bit	-> set = 0
+ *
+ * So, result is always: enable xor set2dis.
+ */
+static void clk_gate_endisable(struct clk_hw *hw, int enable)
 {
-	u32 reg;
+	struct clk_gate *gate = to_clk_gate(hw);
+	int set = gate->flags & CLK_GATE_SET_TO_DISABLE ? 1 : 0;
 	unsigned long flags = 0;
+	u32 reg;
+
+	set ^= enable;
 
 	if (gate->lock)
 		spin_lock_irqsave(gate->lock, flags);
 
 	reg = readl(gate->reg);
-	reg |= BIT(gate->bit_idx);
-	writel(reg, gate->reg);
-
-	if (gate->lock)
-		spin_unlock_irqrestore(gate->lock, flags);
-}
-
-static void clk_gate_clear_bit(struct clk_gate *gate)
-{
-	u32 reg;
-	unsigned long flags = 0;
 
-	if (gate->lock)
-		spin_lock_irqsave(gate->lock, flags);
+	if (set)
+		reg |= BIT(gate->bit_idx);
+	else
+		reg &= ~BIT(gate->bit_idx);
 
-	reg = readl(gate->reg);
-	reg &= ~BIT(gate->bit_idx);
 	writel(reg, gate->reg);
 
 	if (gate->lock)
@@ -62,27 +68,15 @@ static void clk_gate_clear_bit(struct clk_gate *gate)
 
 static int clk_gate_enable(struct clk_hw *hw)
 {
-	struct clk_gate *gate = to_clk_gate(hw);
-
-	if (gate->flags & CLK_GATE_SET_TO_DISABLE)
-		clk_gate_clear_bit(gate);
-	else
-		clk_gate_set_bit(gate);
+	clk_gate_endisable(hw, 1);
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(clk_gate_enable);
 
 static void clk_gate_disable(struct clk_hw *hw)
 {
-	struct clk_gate *gate = to_clk_gate(hw);
-
-	if (gate->flags & CLK_GATE_SET_TO_DISABLE)
-		clk_gate_set_bit(gate);
-	else
-		clk_gate_clear_bit(gate);
+	clk_gate_endisable(hw, 0);
 }
-EXPORT_SYMBOL_GPL(clk_gate_disable);
 
 static int clk_gate_is_enabled(struct clk_hw *hw)
 {
@@ -99,15 +93,25 @@ static int clk_gate_is_enabled(struct clk_hw *hw)
 
 	return reg ? 1 : 0;
 }
-EXPORT_SYMBOL_GPL(clk_gate_is_enabled);
 
-struct clk_ops clk_gate_ops = {
+const struct clk_ops clk_gate_ops = {
 	.enable = clk_gate_enable,
 	.disable = clk_gate_disable,
 	.is_enabled = clk_gate_is_enabled,
 };
 EXPORT_SYMBOL_GPL(clk_gate_ops);
 
+/**
+ * clk_register_gate - register a gate clock with the clock framework
+ * @dev: device that is registering this clock
+ * @name: name of this clock
+ * @parent_name: name of this clock's parent
+ * @flags: framework-specific flags for this clock
+ * @reg: register address to control gating of this clock
+ * @bit_idx: which bit in the register controls gating of this clock
+ * @clk_gate_flags: gate-specific flags for this clock
+ * @lock: shared register lock for this clock
+ */
 struct clk *clk_register_gate(struct device *dev, const char *name,
 		const char *parent_name, unsigned long flags,
 		void __iomem *reg, u8 bit_idx,
@@ -115,36 +119,32 @@ struct clk *clk_register_gate(struct device *dev, const char *name,
 {
 	struct clk_gate *gate;
 	struct clk *clk;
+	struct clk_init_data init;
 
+	/* allocate the gate */
 	gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL);
-
 	if (!gate) {
 		pr_err("%s: could not allocate gated clk\n", __func__);
-		return NULL;
+		return ERR_PTR(-ENOMEM);
 	}
 
+	init.name = name;
+	init.ops = &clk_gate_ops;
+	init.flags = flags;
+	init.parent_names = (parent_name ? &parent_name: NULL);
+	init.num_parents = (parent_name ? 1 : 0);
+
 	/* struct clk_gate assignments */
 	gate->reg = reg;
 	gate->bit_idx = bit_idx;
 	gate->flags = clk_gate_flags;
 	gate->lock = lock;
+	gate->hw.init = &init;
 
-	if (parent_name) {
-		gate->parent[0] = kstrdup(parent_name, GFP_KERNEL);
-		if (!gate->parent[0])
-			goto out;
-	}
+	clk = clk_register(dev, &gate->hw);
+
+	if (IS_ERR(clk))
+		kfree(gate);
 
-	clk = clk_register(dev, name,
-			&clk_gate_ops, &gate->hw,
-			gate->parent,
-			(parent_name ? 1 : 0),
-			flags);
-	if (clk)
-		return clk;
-out:
-	kfree(gate->parent[0]);
-	kfree(gate);
-
-	return NULL;
+	return clk;
 }

drivers/clk/clk-mux.c

@@ -55,7 +55,6 @@ static u8 clk_mux_get_parent(struct clk_hw *hw)
 
 	return val;
 }
-EXPORT_SYMBOL_GPL(clk_mux_get_parent);
 
 static int clk_mux_set_parent(struct clk_hw *hw, u8 index)
 {
@@ -82,35 +81,47 @@ static int clk_mux_set_parent(struct clk_hw *hw, u8 index)
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(clk_mux_set_parent);
 
-struct clk_ops clk_mux_ops = {
+const struct clk_ops clk_mux_ops = {
 	.get_parent = clk_mux_get_parent,
 	.set_parent = clk_mux_set_parent,
 };
 EXPORT_SYMBOL_GPL(clk_mux_ops);
 
 struct clk *clk_register_mux(struct device *dev, const char *name,
-		char **parent_names, u8 num_parents, unsigned long flags,
+		const char **parent_names, u8 num_parents, unsigned long flags,
 		void __iomem *reg, u8 shift, u8 width,
 		u8 clk_mux_flags, spinlock_t *lock)
 {
 	struct clk_mux *mux;
+	struct clk *clk;
+	struct clk_init_data init;
 
-	mux = kmalloc(sizeof(struct clk_mux), GFP_KERNEL);
-
+	/* allocate the mux */
+	mux = kzalloc(sizeof(struct clk_mux), GFP_KERNEL);
 	if (!mux) {
 		pr_err("%s: could not allocate mux clk\n", __func__);
 		return ERR_PTR(-ENOMEM);
 	}
 
+	init.name = name;
+	init.ops = &clk_mux_ops;
+	init.flags = flags;
+	init.parent_names = parent_names;
+	init.num_parents = num_parents;
+
 	/* struct clk_mux assignments */
 	mux->reg = reg;
 	mux->shift = shift;
 	mux->width = width;
 	mux->flags = clk_mux_flags;
 	mux->lock = lock;
+	mux->hw.init = &init;
+
+	clk = clk_register(dev, &mux->hw);
+
+	if (IS_ERR(clk))
+		kfree(mux);
 
-	return clk_register(dev, name, &clk_mux_ops, &mux->hw,
-			parent_names, num_parents, flags);
+	return clk;
 }

drivers/clk/clk.c

@@ -194,9 +194,8 @@ static int __init clk_debug_init(void)
 late_initcall(clk_debug_init);
 #else
 static inline int clk_debug_register(struct clk *clk) { return 0; }
-#endif /* CONFIG_COMMON_CLK_DEBUG */
+#endif
 
-#ifdef CONFIG_COMMON_CLK_DISABLE_UNUSED
 /* caller must hold prepare_lock */
 static void clk_disable_unused_subtree(struct clk *clk)
 {
@@ -246,9 +245,6 @@ static int clk_disable_unused(void)
 	return 0;
 }
 late_initcall(clk_disable_unused);
-#else
-static inline int clk_disable_unused(struct clk *clk) { return 0; }
-#endif /* CONFIG_COMMON_CLK_DISABLE_UNUSED */
 
 /***    helper functions   ***/
 
@@ -287,7 +283,7 @@ unsigned long __clk_get_rate(struct clk *clk)
 	unsigned long ret;
 
 	if (!clk) {
-		ret = -EINVAL;
+		ret = 0;
 		goto out;
 	}
 
@@ -297,7 +293,7 @@ unsigned long __clk_get_rate(struct clk *clk)
 		goto out;
 
 	if (!clk->parent)
-		ret = -ENODEV;
+		ret = 0;
 
 out:
 	return ret;
@@ -562,7 +558,7 @@ EXPORT_SYMBOL_GPL(clk_enable);
  * @clk: the clk whose rate is being returned
  *
  * Simply returns the cached rate of the clk.  Does not query the hardware.  If
- * clk is NULL then returns -EINVAL.
+ * clk is NULL then returns 0.
  */
 unsigned long clk_get_rate(struct clk *clk)
 {
@@ -584,18 +580,22 @@ EXPORT_SYMBOL_GPL(clk_get_rate);
  */
 unsigned long __clk_round_rate(struct clk *clk, unsigned long rate)
 {
-	unsigned long unused;
+	unsigned long parent_rate = 0;
 
 	if (!clk)
 		return -EINVAL;
 
-	if (!clk->ops->round_rate)
-		return clk->rate;
+	if (!clk->ops->round_rate) {
+		if (clk->flags & CLK_SET_RATE_PARENT)
+			return __clk_round_rate(clk->parent, rate);
+		else
+			return clk->rate;
+	}
 
-	if (clk->flags & CLK_SET_RATE_PARENT)
-		return clk->ops->round_rate(clk->hw, rate, &unused);
-	else
-		return clk->ops->round_rate(clk->hw, rate, NULL);
+	if (clk->parent)
+		parent_rate = clk->parent->rate;
+
+	return clk->ops->round_rate(clk->hw, rate, &parent_rate);
 }
 
 /**
@@ -765,25 +765,41 @@ static void clk_calc_subtree(struct clk *clk, unsigned long new_rate)
 static struct clk *clk_calc_new_rates(struct clk *clk, unsigned long rate)
 {
 	struct clk *top = clk;
-	unsigned long best_parent_rate = clk->parent->rate;
+	unsigned long best_parent_rate = 0;
 	unsigned long new_rate;
 
-	if (!clk->ops->round_rate && !(clk->flags & CLK_SET_RATE_PARENT)) {
-		clk->new_rate = clk->rate;
+	/* sanity */
+	if (IS_ERR_OR_NULL(clk))
 		return NULL;
+
+	/* save parent rate, if it exists */
+	if (clk->parent)
+		best_parent_rate = clk->parent->rate;
+
+	/* never propagate up to the parent */
+	if (!(clk->flags & CLK_SET_RATE_PARENT)) {
+		if (!clk->ops->round_rate) {
+			clk->new_rate = clk->rate;
+			return NULL;
+		}
+		new_rate = clk->ops->round_rate(clk->hw, rate, &best_parent_rate);
+		goto out;
 	}
 
-	if (!clk->ops->round_rate && (clk->flags & CLK_SET_RATE_PARENT)) {
+	/* need clk->parent from here on out */
+	if (!clk->parent) {
+		pr_debug("%s: %s has NULL parent\n", __func__, clk->name);
+		return NULL;
+	}
+
+	if (!clk->ops->round_rate) {
 		top = clk_calc_new_rates(clk->parent, rate);
-		new_rate = clk->new_rate = clk->parent->new_rate;
+		new_rate = clk->parent->new_rate;
 
 		goto out;
 	}
 
-	if (clk->flags & CLK_SET_RATE_PARENT)
-		new_rate = clk->ops->round_rate(clk->hw, rate, &best_parent_rate);
-	else
-		new_rate = clk->ops->round_rate(clk->hw, rate, NULL);
+	new_rate = clk->ops->round_rate(clk->hw, rate, &best_parent_rate);
 
 	if (best_parent_rate != clk->parent->rate) {
 		top = clk_calc_new_rates(clk->parent, best_parent_rate);
@@ -839,7 +855,7 @@ static void clk_change_rate(struct clk *clk)
 	old_rate = clk->rate;
 
 	if (clk->ops->set_rate)
-		clk->ops->set_rate(clk->hw, clk->new_rate);
+		clk->ops->set_rate(clk->hw, clk->new_rate, clk->parent->rate);
 
 	if (clk->ops->recalc_rate)
 		clk->rate = clk->ops->recalc_rate(clk->hw,
@@ -859,38 +875,19 @@ static void clk_change_rate(struct clk *clk)
  * @clk: the clk whose rate is being changed
  * @rate: the new rate for clk
  *
- * In the simplest case clk_set_rate will only change the rate of clk.
+ * In the simplest case clk_set_rate will only adjust the rate of clk.
  *
- * If clk has the CLK_SET_RATE_GATE flag set and it is enabled this call
- * will fail; only when the clk is disabled will it be able to change
- * its rate.
+ * Setting the CLK_SET_RATE_PARENT flag allows the rate change operation to
+ * propagate up to clk's parent; whether or not this happens depends on the
+ * outcome of clk's .round_rate implementation.  If *parent_rate is unchanged
+ * after calling .round_rate then upstream parent propagation is ignored.  If
+ * *parent_rate comes back with a new rate for clk's parent then we propagate
+ * up to clk's parent and set it's rate.  Upward propagation will continue
+ * until either a clk does not support the CLK_SET_RATE_PARENT flag or
+ * .round_rate stops requesting changes to clk's parent_rate.
  *
- * Setting the CLK_SET_RATE_PARENT flag allows clk_set_rate to
- * recursively propagate up to clk's parent; whether or not this happens
- * depends on the outcome of clk's .round_rate implementation.  If
- * *parent_rate is 0 after calling .round_rate then upstream parent
- * propagation is ignored.  If *parent_rate comes back with a new rate
- * for clk's parent then we propagate up to clk's parent and set it's
- * rate.  Upward propagation will continue until either a clk does not
- * support the CLK_SET_RATE_PARENT flag or .round_rate stops requesting
- * changes to clk's parent_rate.  If there is a failure during upstream
- * propagation then clk_set_rate will unwind and restore each clk's rate
- * that had been successfully changed.  Afterwards a rate change abort
- * notification will be propagated downstream, starting from the clk
- * that failed.
- *
- * At the end of all of the rate setting, clk_set_rate internally calls
- * __clk_recalc_rates and propagates the rate changes downstream,
- * starting from the highest clk whose rate was changed.  This has the
- * added benefit of propagating post-rate change notifiers.
- *
- * Note that while post-rate change and rate change abort notifications
- * are guaranteed to be sent to a clk only once per call to
- * clk_set_rate, pre-change notifications will be sent for every clk
- * whose rate is changed.  Stacking pre-change notifications is noisy
- * for the drivers subscribed to them, but this allows drivers to react
- * to intermediate clk rate changes up until the point where the final
- * rate is achieved at the end of upstream propagation.
+ * Rate changes are accomplished via tree traversal that also recalculates the
+ * rates for the clocks and fires off POST_RATE_CHANGE notifiers.
  *
  * Returns 0 on success, -EERROR otherwise.
  */
@@ -906,6 +903,11 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
 	if (rate == clk->rate)
 		goto out;
 
+	if ((clk->flags & CLK_SET_RATE_GATE) && __clk_is_enabled(clk)) {
+		ret = -EBUSY;
+		goto out;
+	}
+
 	/* calculate new rates and get the topmost changed clock */
 	top = clk_calc_new_rates(clk, rate);
 	if (!top) {
@@ -1175,40 +1177,41 @@ EXPORT_SYMBOL_GPL(clk_set_parent);
  *
  * Initializes the lists in struct clk, queries the hardware for the
  * parent and rate and sets them both.
- *
- * Any struct clk passed into __clk_init must have the following members
- * populated:
- * 	.name
- * 	.ops
- * 	.hw
- * 	.parent_names
- * 	.num_parents
- * 	.flags
- *
- * Essentially, everything that would normally be passed into clk_register is
- * assumed to be initialized already in __clk_init.  The other members may be
- * populated, but are optional.
- *
- * __clk_init is only exposed via clk-private.h and is intended for use with
- * very large numbers of clocks that need to be statically initialized.  It is
- * a layering violation to include clk-private.h from any code which implements
- * a clock's .ops; as such any statically initialized clock data MUST be in a
- * separate C file from the logic that implements it's operations.
  */
-void __clk_init(struct device *dev, struct clk *clk)
+int __clk_init(struct device *dev, struct clk *clk)
 {
-	int i;
+	int i, ret = 0;
 	struct clk *orphan;
 	struct hlist_node *tmp, *tmp2;
 
 	if (!clk)
-		return;
+		return -EINVAL;
 
 	mutex_lock(&prepare_lock);
 
 	/* check to see if a clock with this name is already registered */
-	if (__clk_lookup(clk->name))
+	if (__clk_lookup(clk->name)) {
+		pr_debug("%s: clk %s already initialized\n",
+				__func__, clk->name);
+		ret = -EEXIST;
+		goto out;
+	}
+
+	/* check that clk_ops are sane.  See Documentation/clk.txt */
+	if (clk->ops->set_rate &&
+			!(clk->ops->round_rate && clk->ops->recalc_rate)) {
+		pr_warning("%s: %s must implement .round_rate & .recalc_rate\n",
+				__func__, clk->name);
+		ret = -EINVAL;
 		goto out;
+	}
+
+	if (clk->ops->set_parent && !clk->ops->get_parent) {
+		pr_warning("%s: %s must implement .get_parent & .set_parent\n",
+				__func__, clk->name);
+		ret = -EINVAL;
+		goto out;
+	}
 
 	/* throw a WARN if any entries in parent_names are NULL */
 	for (i = 0; i < clk->num_parents; i++)
@@ -1302,45 +1305,118 @@ void __clk_init(struct device *dev, struct clk *clk)
 out:
 	mutex_unlock(&prepare_lock);
 
-	return;
+	return ret;
 }
 
+/**
+ * __clk_register - register a clock and return a cookie.
+ *
+ * Same as clk_register, except that the .clk field inside hw shall point to a
+ * preallocated (generally statically allocated) struct clk. None of the fields
+ * of the struct clk need to be initialized.
+ *
+ * The data pointed to by .init and .clk field shall NOT be marked as init
+ * data.
+ *
+ * __clk_register is only exposed via clk-private.h and is intended for use with
+ * very large numbers of clocks that need to be statically initialized.  It is
+ * a layering violation to include clk-private.h from any code which implements
+ * a clock's .ops; as such any statically initialized clock data MUST be in a
+ * separate C file from the logic that implements it's operations.  Returns 0
+ * on success, otherwise an error code.
+ */
+struct clk *__clk_register(struct device *dev, struct clk_hw *hw)
+{
+	int ret;
+	struct clk *clk;
+
+	clk = hw->clk;
+	clk->name = hw->init->name;
+	clk->ops = hw->init->ops;
+	clk->hw = hw;
+	clk->flags = hw->init->flags;
+	clk->parent_names = hw->init->parent_names;
+	clk->num_parents = hw->init->num_parents;
+
+	ret = __clk_init(dev, clk);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return clk;
+}
+EXPORT_SYMBOL_GPL(__clk_register);
+
 /**
  * clk_register - allocate a new clock, register it and return an opaque cookie
  * @dev: device that is registering this clock
- * @name: clock name
- * @ops: operations this clock supports
  * @hw: link to hardware-specific clock data
- * @parent_names: array of string names for all possible parents
- * @num_parents: number of possible parents
- * @flags: framework-level hints and quirks
  *
  * clk_register is the primary interface for populating the clock tree with new
  * clock nodes.  It returns a pointer to the newly allocated struct clk which
  * cannot be dereferenced by driver code but may be used in conjuction with the
- * rest of the clock API.
+ * rest of the clock API.  In the event of an error clk_register will return an
+ * error code; drivers must test for an error code after calling clk_register.
  */
-struct clk *clk_register(struct device *dev, const char *name,
-		const struct clk_ops *ops, struct clk_hw *hw,
-		char **parent_names, u8 num_parents, unsigned long flags)
+struct clk *clk_register(struct device *dev, struct clk_hw *hw)
 {
+	int i, ret;
 	struct clk *clk;
 
 	clk = kzalloc(sizeof(*clk), GFP_KERNEL);
-	if (!clk)
-		return NULL;
+	if (!clk) {
+		pr_err("%s: could not allocate clk\n", __func__);
+		ret = -ENOMEM;
+		goto fail_out;
+	}
 
-	clk->name = name;
-	clk->ops = ops;
+	clk->name = kstrdup(hw->init->name, GFP_KERNEL);
+	if (!clk->name) {
+		pr_err("%s: could not allocate clk->name\n", __func__);
+		ret = -ENOMEM;
+		goto fail_name;
+	}
+	clk->ops = hw->init->ops;
 	clk->hw = hw;
-	clk->flags = flags;
-	clk->parent_names = parent_names;
-	clk->num_parents = num_parents;
+	clk->flags = hw->init->flags;
+	clk->num_parents = hw->init->num_parents;
 	hw->clk = clk;
 
-	__clk_init(dev, clk);
+	/* allocate local copy in case parent_names is __initdata */
+	clk->parent_names = kzalloc((sizeof(char*) * clk->num_parents),
+			GFP_KERNEL);
 
-	return clk;
+	if (!clk->parent_names) {
+		pr_err("%s: could not allocate clk->parent_names\n", __func__);
+		ret = -ENOMEM;
+		goto fail_parent_names;
+	}
+
+
+	/* copy each string name in case parent_names is __initdata */
+	for (i = 0; i < clk->num_parents; i++) {
+		clk->parent_names[i] = kstrdup(hw->init->parent_names[i],
+						GFP_KERNEL);
+		if (!clk->parent_names[i]) {
+			pr_err("%s: could not copy parent_names\n", __func__);
+			ret = -ENOMEM;
+			goto fail_parent_names_copy;
+		}
+	}
+
+	ret = __clk_init(dev, clk);
+	if (!ret)
+		return clk;
+
+fail_parent_names_copy:
+	while (--i >= 0)
+		kfree(clk->parent_names[i]);
+	kfree(clk->parent_names);
+fail_parent_names:
+	kfree(clk->name);
+fail_name:
+	kfree(clk);
+fail_out:
+	return ERR_PTR(ret);
 }
 EXPORT_SYMBOL_GPL(clk_register);
 

include/linux/clk-private.h

@@ -30,7 +30,7 @@ struct clk {
 	const struct clk_ops	*ops;
 	struct clk_hw		*hw;
 	struct clk		*parent;
-	char			**parent_names;
+	const char		**parent_names;
 	struct clk		**parents;
 	u8			num_parents;
 	unsigned long		rate;
@@ -55,12 +55,22 @@ struct clk {
  * alternative macro for static initialization
  */
 
-extern struct clk_ops clk_fixed_rate_ops;
+#define DEFINE_CLK(_name, _ops, _flags, _parent_names,		\
+		_parents)					\
+	static struct clk _name = {				\
+		.name = #_name,					\
+		.ops = &_ops,					\
+		.hw = &_name##_hw.hw,				\
+		.parent_names = _parent_names,			\
+		.num_parents = ARRAY_SIZE(_parent_names),	\
+		.parents = _parents,				\
+		.flags = _flags,				\
+	}
 
 #define DEFINE_CLK_FIXED_RATE(_name, _flags, _rate,		\
 				_fixed_rate_flags)		\
 	static struct clk _name;				\
-	static char *_name##_parent_names[] = {};		\
+	static const char *_name##_parent_names[] = {};		\
 	static struct clk_fixed_rate _name##_hw = {		\
 		.hw = {						\
 			.clk = &_name,				\
@@ -68,23 +78,14 @@ extern struct clk_ops clk_fixed_rate_ops;
 		.fixed_rate = _rate,				\
 		.flags = _fixed_rate_flags,			\
 	};							\
-	static struct clk _name = {				\
-		.name = #_name,					\
-		.ops = &clk_fixed_rate_ops,			\
-		.hw = &_name##_hw.hw,				\
-		.parent_names = _name##_parent_names,		\
-		.num_parents =					\
-			ARRAY_SIZE(_name##_parent_names),	\
-		.flags = _flags,				\
-	};
-
-extern struct clk_ops clk_gate_ops;
+	DEFINE_CLK(_name, clk_fixed_rate_ops, _flags,		\
+			_name##_parent_names, NULL);
 
 #define DEFINE_CLK_GATE(_name, _parent_name, _parent_ptr,	\
 				_flags, _reg, _bit_idx,		\
 				_gate_flags, _lock)		\
 	static struct clk _name;				\
-	static char *_name##_parent_names[] = {			\
+	static const char *_name##_parent_names[] = {		\
 		_parent_name,					\
 	};							\
 	static struct clk *_name##_parents[] = {		\
@@ -99,24 +100,14 @@ extern struct clk_ops clk_gate_ops;
 		.flags = _gate_flags,				\
 		.lock = _lock,					\
 	};							\
-	static struct clk _name = {				\
-		.name = #_name,					\
-		.ops = &clk_gate_ops,				\
-		.hw = &_name##_hw.hw,				\
-		.parent_names = _name##_parent_names,		\
-		.num_parents =					\
-			ARRAY_SIZE(_name##_parent_names),	\
-		.parents = _name##_parents,			\
-		.flags = _flags,				\
-	};
-
-extern struct clk_ops clk_divider_ops;
+	DEFINE_CLK(_name, clk_gate_ops, _flags,			\
+			_name##_parent_names, _name##_parents);
 
 #define DEFINE_CLK_DIVIDER(_name, _parent_name, _parent_ptr,	\
 				_flags, _reg, _shift, _width,	\
 				_divider_flags, _lock)		\
 	static struct clk _name;				\
-	static char *_name##_parent_names[] = {			\
+	static const char *_name##_parent_names[] = {		\
 		_parent_name,					\
 	};							\
 	static struct clk *_name##_parents[] = {		\
@@ -132,18 +123,8 @@ extern struct clk_ops clk_divider_ops;
 		.flags = _divider_flags,			\
 		.lock = _lock,					\
 	};							\
-	static struct clk _name = {				\
-		.name = #_name,					\
-		.ops = &clk_divider_ops,			\
-		.hw = &_name##_hw.hw,				\
-		.parent_names = _name##_parent_names,		\
-		.num_parents =					\
-			ARRAY_SIZE(_name##_parent_names),	\
-		.parents = _name##_parents,			\
-		.flags = _flags,				\
-	};
-
-extern struct clk_ops clk_mux_ops;
+	DEFINE_CLK(_name, clk_divider_ops, _flags,		\
+			_name##_parent_names, _name##_parents);
 
 #define DEFINE_CLK_MUX(_name, _parent_names, _parents, _flags,	\
 				_reg, _shift, _width,		\
@@ -159,16 +140,28 @@ extern struct clk_ops clk_mux_ops;
 		.flags = _mux_flags,				\
 		.lock = _lock,					\
 	};							\
-	static struct clk _name = {				\
-		.name = #_name,					\
-		.ops = &clk_mux_ops,				\
-		.hw = &_name##_hw.hw,				\
-		.parent_names = _parent_names,			\
-		.num_parents =					\
-			ARRAY_SIZE(_parent_names),		\
-		.parents = _parents,				\
-		.flags = _flags,				\
-	};
+	DEFINE_CLK(_name, clk_mux_ops, _flags, _parent_names,	\
+			_parents);
+
+#define DEFINE_CLK_FIXED_FACTOR(_name, _parent_name,		\
+				_parent_ptr, _flags,		\
+				_mult, _div)			\
+	static struct clk _name;				\
+	static const char *_name##_parent_names[] = {		\
+		_parent_name,					\
+	};							\
+	static struct clk *_name##_parents[] = {		\
+		_parent_ptr,					\
+	};							\
+	static struct clk_fixed_factor _name##_hw = {		\
+		.hw = {						\
+			.clk = &_name,				\
+		},						\
+		.mult = _mult,					\
+		.div = _div,					\
+	};							\
+	DEFINE_CLK(_name, clk_fixed_factor_ops, _flags,		\
+			_name##_parent_names, _name##_parents);
 
 /**
  * __clk_init - initialize the data structures in a struct clk
@@ -189,8 +182,12 @@ extern struct clk_ops clk_mux_ops;
  *
  * It is not necessary to call clk_register if __clk_init is used directly with
  * statically initialized clock data.
+ *
+ * Returns 0 on success, otherwise an error code.
  */
-void __clk_init(struct device *dev, struct clk *clk);
+int __clk_init(struct device *dev, struct clk *clk);
+
+struct clk *__clk_register(struct device *dev, struct clk_hw *hw);
 
 #endif /* CONFIG_COMMON_CLK */
 #endif /* CLK_PRIVATE_H */

include/linux/clk-provider.h

@@ -15,19 +15,6 @@
 
 #ifdef CONFIG_COMMON_CLK
 
-/**
- * struct clk_hw - handle for traversing from a struct clk to its corresponding
- * hardware-specific structure.  struct clk_hw should be declared within struct
- * clk_foo and then referenced by the struct clk instance that uses struct
- * clk_foo's clk_ops
- *
- * clk: pointer to the struct clk instance that points back to this struct
- * clk_hw instance
- */
-struct clk_hw {
-	struct clk *clk;
-};
-
 /*
  * flags used across common struct clk.  these flags should only affect the
  * top-level framework.  custom flags for dealing with hardware specifics
@@ -39,6 +26,8 @@ struct clk_hw {
 #define CLK_IGNORE_UNUSED	BIT(3) /* do not gate even if unused */
 #define CLK_IS_ROOT		BIT(4) /* root clk, has no parent */
 
+struct clk_hw;
+
 /**
  * struct clk_ops -  Callback operations for hardware clocks; these are to
  * be provided by the clock implementation, and will be called by drivers
@@ -88,19 +77,11 @@ struct clk_hw {
  * 		array index into the value programmed into the hardware.
  * 		Returns 0 on success, -EERROR otherwise.
  *
- * @set_rate:	Change the rate of this clock. If this callback returns
- * 		CLK_SET_RATE_PARENT, the rate change will be propagated to the
- * 		parent clock (which may propagate again if the parent clock
- * 		also sets this flag). The requested rate of the parent is
- * 		passed back from the callback in the second 'unsigned long *'
- * 		argument.  Note that it is up to the hardware clock's set_rate
- * 		implementation to insure that clocks do not run out of spec
- * 		when propgating the call to set_rate up to the parent.  One way
- * 		to do this is to gate the clock (via clk_disable and/or
- * 		clk_unprepare) before calling clk_set_rate, then ungating it
- * 		afterward.  If your clock also has the CLK_GATE_SET_RATE flag
- * 		set then this will insure safety.  Returns 0 on success,
- * 		-EERROR otherwise.
+ * @set_rate:	Change the rate of this clock. The requested rate is specified
+ *		by the second argument, which should typically be the return
+ *		of .round_rate call.  The third argument gives the parent rate
+ *		which is likely helpful for most .set_rate implementation.
+ *		Returns 0 on success, -EERROR otherwise.
  *
  * The clk_enable/clk_disable and clk_prepare/clk_unprepare pairs allow
  * implementations to split any work between atomic (enable) and sleepable
@@ -125,10 +106,46 @@ struct clk_ops {
 					unsigned long *);
 	int		(*set_parent)(struct clk_hw *hw, u8 index);
 	u8		(*get_parent)(struct clk_hw *hw);
-	int		(*set_rate)(struct clk_hw *hw, unsigned long);
+	int		(*set_rate)(struct clk_hw *hw, unsigned long,
+				    unsigned long);
 	void		(*init)(struct clk_hw *hw);
 };
 
+/**
+ * struct clk_init_data - holds init data that's common to all clocks and is
+ * shared between the clock provider and the common clock framework.
+ *
+ * @name: clock name
+ * @ops: operations this clock supports
+ * @parent_names: array of string names for all possible parents
+ * @num_parents: number of possible parents
+ * @flags: framework-level hints and quirks
+ */
+struct clk_init_data {
+	const char		*name;
+	const struct clk_ops	*ops;
+	const char		**parent_names;
+	u8			num_parents;
+	unsigned long		flags;
+};
+
+/**
+ * struct clk_hw - handle for traversing from a struct clk to its corresponding
+ * hardware-specific structure.  struct clk_hw should be declared within struct
+ * clk_foo and then referenced by the struct clk instance that uses struct
+ * clk_foo's clk_ops
+ *
+ * @clk: pointer to the struct clk instance that points back to this struct
+ * clk_hw instance
+ *
+ * @init: pointer to struct clk_init_data that contains the init data shared
+ * with the common clock framework.
+ */
+struct clk_hw {
+	struct clk *clk;
+	struct clk_init_data *init;
+};
+
 /*
  * DOC: Basic clock implementations common to many platforms
  *
@@ -149,6 +166,7 @@ struct clk_fixed_rate {
 	u8		flags;
 };
 
+extern const struct clk_ops clk_fixed_rate_ops;
 struct clk *clk_register_fixed_rate(struct device *dev, const char *name,
 		const char *parent_name, unsigned long flags,
 		unsigned long fixed_rate);
@@ -165,7 +183,7 @@ struct clk *clk_register_fixed_rate(struct device *dev, const char *name,
  * Clock which can gate its output.  Implements .enable & .disable
  *
  * Flags:
- * CLK_GATE_SET_DISABLE - by default this clock sets the bit at bit_idx to
+ * CLK_GATE_SET_TO_DISABLE - by default this clock sets the bit at bit_idx to
  * 	enable the clock.  Setting this flag does the opposite: setting the bit
  * 	disable the clock and clearing it enables the clock
  */
@@ -175,11 +193,11 @@ struct clk_gate {
 	u8		bit_idx;
 	u8		flags;
 	spinlock_t	*lock;
-	char		*parent[1];
 };
 
 #define CLK_GATE_SET_TO_DISABLE		BIT(0)
 
+extern const struct clk_ops clk_gate_ops;
 struct clk *clk_register_gate(struct device *dev, const char *name,
 		const char *parent_name, unsigned long flags,
 		void __iomem *reg, u8 bit_idx,
@@ -212,12 +230,12 @@ struct clk_divider {
 	u8		width;
 	u8		flags;
 	spinlock_t	*lock;
-	char		*parent[1];
 };
 
 #define CLK_DIVIDER_ONE_BASED		BIT(0)
 #define CLK_DIVIDER_POWER_OF_TWO	BIT(1)
 
+extern const struct clk_ops clk_divider_ops;
 struct clk *clk_register_divider(struct device *dev, const char *name,
 		const char *parent_name, unsigned long flags,
 		void __iomem *reg, u8 shift, u8 width,
@@ -238,7 +256,7 @@ struct clk *clk_register_divider(struct device *dev, const char *name,
  *
  * Flags:
  * CLK_MUX_INDEX_ONE - register index starts at 1, not 0
- * CLK_MUX_INDEX_BITWISE - register index is a single bit (power of two)
+ * CLK_MUX_INDEX_BIT - register index is a single bit (power of two)
  */
 struct clk_mux {
 	struct clk_hw	hw;
@@ -252,29 +270,47 @@ struct clk_mux {
 #define CLK_MUX_INDEX_ONE		BIT(0)
 #define CLK_MUX_INDEX_BIT		BIT(1)
 
+extern const struct clk_ops clk_mux_ops;
 struct clk *clk_register_mux(struct device *dev, const char *name,
-		char **parent_names, u8 num_parents, unsigned long flags,
+		const char **parent_names, u8 num_parents, unsigned long flags,
 		void __iomem *reg, u8 shift, u8 width,
 		u8 clk_mux_flags, spinlock_t *lock);
 
+/**
+ * struct clk_fixed_factor - fixed multiplier and divider clock
+ *
+ * @hw:		handle between common and hardware-specific interfaces
+ * @mult:	multiplier
+ * @div:	divider
+ *
+ * Clock with a fixed multiplier and divider. The output frequency is the
+ * parent clock rate divided by div and multiplied by mult.
+ * Implements .recalc_rate, .set_rate and .round_rate
+ */
+
+struct clk_fixed_factor {
+	struct clk_hw	hw;
+	unsigned int	mult;
+	unsigned int	div;
+};
+
+extern struct clk_ops clk_fixed_factor_ops;
+struct clk *clk_register_fixed_factor(struct device *dev, const char *name,
+		const char *parent_name, unsigned long flags,
+		unsigned int mult, unsigned int div);
+
 /**
  * clk_register - allocate a new clock, register it and return an opaque cookie
  * @dev: device that is registering this clock
- * @name: clock name
- * @ops: operations this clock supports
  * @hw: link to hardware-specific clock data
- * @parent_names: array of string names for all possible parents
- * @num_parents: number of possible parents
- * @flags: framework-level hints and quirks
  *
  * clk_register is the primary interface for populating the clock tree with new
  * clock nodes.  It returns a pointer to the newly allocated struct clk which
  * cannot be dereferenced by driver code but may be used in conjuction with the
- * rest of the clock API.
+ * rest of the clock API.  In the event of an error clk_register will return an
+ * error code; drivers must test for an error code after calling clk_register.
  */
-struct clk *clk_register(struct device *dev, const char *name,
-		const struct clk_ops *ops, struct clk_hw *hw,
-		char **parent_names, u8 num_parents, unsigned long flags);
+struct clk *clk_register(struct device *dev, struct clk_hw *hw);
 
 /* helper functions */
 const char *__clk_get_name(struct clk *clk);

include/linux/clk.h

@@ -81,7 +81,7 @@ int clk_notifier_register(struct clk *clk, struct notifier_block *nb);
 
 int clk_notifier_unregister(struct clk *clk, struct notifier_block *nb);
 
-#endif /* !CONFIG_COMMON_CLK */
+#endif
 
 /**
  * clk_get - lookup and obtain a reference to a clock producer.
@@ -220,7 +220,7 @@ void clk_put(struct clk *clk);
  * Returns rounded clock rate in Hz, or negative errno.
  */
 long clk_round_rate(struct clk *clk, unsigned long rate);
- 
+
 /**
  * clk_set_rate - set the clock rate for a clock source
  * @clk: clock source
@@ -229,7 +229,7 @@ long clk_round_rate(struct clk *clk, unsigned long rate);
  * Returns success (0) or negative errno.
  */
 int clk_set_rate(struct clk *clk, unsigned long rate);
- 
+
 /**
  * clk_set_parent - set the parent clock source for this clock
  * @clk: clock source