Merge branch 'linux-2.6'

.gitignore

@@ -53,3 +53,5 @@ cscope.*
 
 *.orig
 *.rej
+*~
+\#*#

Documentation/00-INDEX

@@ -183,8 +183,6 @@ i386/
 	- directory with info about Linux on Intel 32 bit architecture.
 ia64/
 	- directory with info about Linux on Intel 64 bit architecture.
-ide.txt
-	- important info for users of ATA devices (IDE/EIDE disks and CD-ROMS).
 infiniband/
 	- directory with documents concerning Linux InfiniBand support.
 initrd.txt

Documentation/DocBook/kernel-api.tmpl

@@ -361,12 +361,14 @@ X!Edrivers/pnp/system.c
   <chapter id="blkdev">
      <title>Block Devices</title>
 !Eblock/blk-core.c
+!Iblock/blk-core.c
 !Eblock/blk-map.c
 !Iblock/blk-sysfs.c
 !Eblock/blk-settings.c
 !Eblock/blk-exec.c
 !Eblock/blk-barrier.c
 !Eblock/blk-tag.c
+!Iblock/blk-tag.c
   </chapter>
 
   <chapter id="chrdev">

Documentation/cdrom/ide-cd

@@ -45,7 +45,7 @@ This driver provides the following features:
 ---------------
 
 0. The ide-cd relies on the ide disk driver.  See
-   Documentation/ide.txt for up-to-date information on the ide
+   Documentation/ide/ide.txt for up-to-date information on the ide
    driver.
 
 1. Make sure that the ide and ide-cd drivers are compiled into the
@@ -64,7 +64,7 @@ This driver provides the following features:
 
    Depending on what type of IDE interface you have, you may need to
    specify additional configuration options.  See
-   Documentation/ide.txt.
+   Documentation/ide/ide.txt.
 
 2. You should also ensure that the iso9660 filesystem is either
    compiled into the kernel or available as a loadable module.  You
@@ -84,7 +84,7 @@ This driver provides the following features:
    on the primary IDE interface are called `hda' and `hdb',
    respectively.  The drives on the secondary interface are called
    `hdc' and `hdd'.  (Interfaces at other locations get other letters
-   in the third position; see Documentation/ide.txt.)
+   in the third position; see Documentation/ide/ide.txt.)
 
    If you want your CDROM drive to be found automatically by the
    driver, you should make sure your IDE interface uses either the
@@ -93,7 +93,7 @@ This driver provides the following features:
    be jumpered as `master'.  (If for some reason you cannot configure
    your system in this manner, you can probably still use the driver.
    You may have to pass extra configuration information to the kernel
-   when you boot, however.  See Documentation/ide.txt for more
+   when you boot, however.  See Documentation/ide/ide.txt for more
    information.)
 
 4. Boot the system.  If the drive is recognized, you should see a
@@ -201,7 +201,7 @@ TEST
 This section discusses some common problems encountered when trying to
 use the driver, and some possible solutions.  Note that if you are
 experiencing problems, you should probably also review
-Documentation/ide.txt for current information about the underlying
+Documentation/ide/ide.txt for current information about the underlying
 IDE support code.  Some of these items apply only to earlier versions
 of the driver, but are mentioned here for completeness.
 
@@ -211,7 +211,7 @@ from the driver.
 a. Drive is not detected during booting.
 
    - Review the configuration instructions above and in
-     Documentation/ide.txt, and check how your hardware is
+     Documentation/ide/ide.txt, and check how your hardware is
      configured.
 
    - If your drive is the only device on an IDE interface, it should
@@ -219,7 +219,7 @@ a. Drive is not detected during booting.
 
    - If your IDE interface is not at the standard addresses of 0x170
      or 0x1f0, you'll need to explicitly inform the driver using a
-     lilo option.  See Documentation/ide.txt.  (This feature was
+     lilo option.  See Documentation/ide/ide.txt.  (This feature was
      added around kernel version 1.3.30.)
 
    - If the autoprobing is not finding your drive, you can tell the
@@ -245,7 +245,7 @@ a. Drive is not detected during booting.
      Support for some interfaces needing extra initialization is
      provided in later 1.3.x kernels.  You may need to turn on
      additional kernel configuration options to get them to work;
-     see Documentation/ide.txt.
+     see Documentation/ide/ide.txt.
 
      Even if support is not available for your interface, you may be
      able to get it to work with the following procedure.  First boot
@@ -299,7 +299,7 @@ c. System hangups.
     be worked around by specifying the `serialize' option when
     booting.  Recent kernels should be able to detect the need for
     this automatically in most cases, but the detection is not
-    foolproof.  See Documentation/ide.txt for more information
+    foolproof.  See Documentation/ide/ide.txt for more information
     about the `serialize' option and the CMD640B.
 
   - Note that many MS-DOS CDROM drivers will work with such buggy

Documentation/controllers/memory.txt

@@ -1,4 +1,8 @@
-Memory Controller
+Memory Resource Controller
+
+NOTE: The Memory Resource Controller has been generically been referred
+to as the memory controller in this document. Do not confuse memory controller
+used here with the memory controller that is used in hardware.
 
 Salient features
 
@@ -152,7 +156,7 @@ The memory controller uses the following hierarchy
 
 a. Enable CONFIG_CGROUPS
 b. Enable CONFIG_RESOURCE_COUNTERS
-c. Enable CONFIG_CGROUP_MEM_CONT
+c. Enable CONFIG_CGROUP_MEM_RES_CTLR
 
 1. Prepare the cgroups
 # mkdir -p /cgroups
@@ -164,7 +168,7 @@ c. Enable CONFIG_CGROUP_MEM_CONT
 
 Since now we're in the 0 cgroup,
 We can alter the memory limit:
-# echo -n 4M > /cgroups/0/memory.limit_in_bytes
+# echo 4M > /cgroups/0/memory.limit_in_bytes
 
 NOTE: We can use a suffix (k, K, m, M, g or G) to indicate values in kilo,
 mega or gigabytes.
@@ -185,7 +189,7 @@ number of factors, such as rounding up to page boundaries or the total
 availability of memory on the system.  The user is required to re-read
 this file after a write to guarantee the value committed by the kernel.
 
-# echo -n 1 > memory.limit_in_bytes
+# echo 1 > memory.limit_in_bytes
 # cat memory.limit_in_bytes
 4096
 
@@ -197,7 +201,7 @@ caches, RSS and Active pages/Inactive pages are shown.
 
 The memory.force_empty gives an interface to drop *all* charges by force.
 
-# echo -n 1 > memory.force_empty
+# echo 1 > memory.force_empty
 
 will drop all charges in cgroup. Currently, this is maintained for test.
 

Documentation/debugging-via-ohci1394.txt

@@ -36,14 +36,15 @@ available (notebooks) or too slow for extensive debug information (like ACPI).
 Drivers
 -------
 
-The OHCI-1394 drivers in drivers/firewire and drivers/ieee1394 initialize
-the OHCI-1394 controllers to a working state and can be used to enable
-physical DMA. By default you only have to load the driver, and physical
-DMA access will be granted to all remote nodes, but it can be turned off
-when using the ohci1394 driver.
-
-Because these drivers depend on the PCI enumeration to be completed, an
-initialization routine which can runs pretty early (long before console_init(),
+The ohci1394 driver in drivers/ieee1394 initializes the OHCI-1394 controllers
+to a working state and enables physical DMA by default for all remote nodes.
+This can be turned off by ohci1394's module parameter phys_dma=0.
+
+The alternative firewire-ohci driver in drivers/firewire uses filtered physical
+DMA, hence is not yet suitable for remote debugging.
+
+Because ohci1394 depends on the PCI enumeration to be completed, an
+initialization routine which runs pretty early (long before console_init()
 which makes the printk buffer appear on the console can be called) was written.
 
 To activate it, enable CONFIG_PROVIDE_OHCI1394_DMA_INIT (Kernel hacking menu:

Documentation/feature-removal-schedule.txt

@@ -172,6 +172,16 @@ Who:	Len Brown <len.brown@intel.com>
 
 ---------------------------
 
+What:	ide-tape driver
+When:	July 2008
+Files:	drivers/ide/ide-tape.c
+Why:	This driver might not have any users anymore and maintaining it for no
+	reason is an effort no one wants to make.
+Who:	Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>, Borislav Petkov
+	<petkovbb@googlemail.com>
+
+---------------------------
+
 What: libata spindown skipping and warning
 When: Dec 2008
 Why:  Some halt(8) implementations synchronize caches for and spin
@@ -306,3 +316,15 @@ Why:	Largely unmaintained and almost entirely unused.  File system
 	is largely pointless as without a lot of work only the most
 	trivial of Solaris binaries can work with the emulation code.
 Who:	David S. Miller <davem@davemloft.net>
+
+---------------------------
+
+What:	init_mm export
+When:	2.6.26
+Why:	Not used in-tree. The current out-of-tree users used it to
+	work around problems in the CPA code which should be resolved
+	by now. One usecase was described to provide verification code
+	of the CPA operation. That's a good idea in general, but such
+	code / infrastructure should be in the kernel and not in some
+	out-of-tree driver.
+Who:	Thomas Gleixner <tglx@linutronix.de>

Documentation/gpio.txt

@@ -2,6 +2,9 @@ GPIO Interfaces
 
 This provides an overview of GPIO access conventions on Linux.
 
+These calls use the gpio_* naming prefix.  No other calls should use that
+prefix, or the related __gpio_* prefix.
+
 
 What is a GPIO?
 ===============
@@ -69,11 +72,13 @@ in this document, but drivers acting as clients to the GPIO interface must
 not care how it's implemented.)
 
 That said, if the convention is supported on their platform, drivers should
-use it when possible.  Platforms should declare GENERIC_GPIO support in
-Kconfig (boolean true), which multi-platform drivers can depend on when
-using the include file:
+use it when possible.  Platforms must declare GENERIC_GPIO support in their
+Kconfig (boolean true), and provide an <asm/gpio.h> file.  Drivers that can't
+work without standard GPIO calls should have Kconfig entries which depend
+on GENERIC_GPIO.  The GPIO calls are available, either as "real code" or as
+optimized-away stubs, when drivers use the include file:
 
-	#include <asm/gpio.h>
+	#include <linux/gpio.h>
 
 If you stick to this convention then it'll be easier for other developers to
 see what your code is doing, and help maintain it.
@@ -316,6 +321,9 @@ pulldowns integrated on some platforms.  Not all platforms support them,
 or support them in the same way; and any given board might use external
 pullups (or pulldowns) so that the on-chip ones should not be used.
 (When a circuit needs 5 kOhm, on-chip 100 kOhm resistors won't do.)
+Likewise drive strength (2 mA vs 20 mA) and voltage (1.8V vs 3.3V) is a
+platform-specific issue, as are models like (not) having a one-to-one
+correspondence between configurable pins and GPIOs.
 
 There are other system-specific mechanisms that are not specified here,
 like the aforementioned options for input de-glitching and wire-OR output.

Documentation/ide/00-INDEX

@@ -0,0 +1,12 @@
+00-INDEX
+    	- this file
+ChangeLog.ide-cd.1994-2004
+	- ide-cd changelog
+ChangeLog.ide-floppy.1996-2002
+	- ide-floppy changelog
+ChangeLog.ide-tape.1995-2002
+	- ide-tape changelog
+ide-tape.txt
+	- info on the IDE ATAPI streaming tape driver
+ide.txt
+	- important info for users of ATA devices (IDE/EIDE disks and CD-ROMS).

Documentation/ide.txt → Documentation/ide/ide.txt

@@ -3,11 +3,11 @@
 
 ==============================================================================
 
-   
+
    The hdparm utility can be used to control various IDE features on a
    running system. It is packaged separately.  Please Look for it on popular
    linux FTP sites.
-   
+
 
 
 ***  IMPORTANT NOTICES:  BUGGY IDE CHIPSETS CAN CORRUPT DATA!!
@@ -51,7 +51,7 @@ Common pitfalls:
 
 ================================================================================
 
-This is the multiple IDE interface driver, as evolved from hd.c.  
+This is the multiple IDE interface driver, as evolved from hd.c.
 
 It supports up to 9 IDE interfaces per default, on one or more IRQs (usually
 14 & 15).  There can be up to two drives per interface, as per the ATA-6 spec.
@@ -215,17 +215,17 @@ Summary of ide driver parameters for kernel command line
 --------------------------------------------------------
 
  "hdx="  is recognized for all "x" from "a" to "h", such as "hdc".
- 
+
  "idex=" is recognized for all "x" from "0" to "3", such as "ide1".
 
  "hdx=noprobe"		: drive may be present, but do not probe for it
- 
+
  "hdx=none"		: drive is NOT present, ignore cmos and do not probe
- 
+
  "hdx=nowerr"		: ignore the WRERR_STAT bit on this drive
- 
+
  "hdx=cdrom"		: drive is present, and is a cdrom drive
- 
+
  "hdx=cyl,head,sect"	: disk drive is present, with specified geometry
 
  "hdx=remap"		: remap access of sector 0 to sector 1 (for EZDrive)
@@ -258,12 +258,10 @@ Summary of ide driver parameters for kernel command line
 			  As for VLB, it is safest to not specify it.
 			  Bigger values are safer than smaller ones.
 
- "idex=noprobe"		: do not attempt to access/use this interface
- 
  "idex=base"		: probe for an interface at the addr specified,
 			  where "base" is usually 0x1f0 or 0x170
 			  and "ctl" is assumed to be "base"+0x206
-			  
+
  "idex=base,ctl"	: specify both base and ctl
 
  "idex=base,ctl,irq"	: specify base, ctl, and irq number
@@ -274,7 +272,7 @@ Summary of ide driver parameters for kernel command line
 			  to take effect.
 
  "idex=four"		: four drives on idex and ide(x^1) share same ports
-			
+
  "idex=reset"		: reset interface after probe
 
  "idex=ata66"		: informs the interface that it has an 80c cable
@@ -307,53 +305,6 @@ Also for legacy CMD640 host driver (cmd640) you need to use "probe_vlb"
 kernel paremeter to enable probing for VLB version of the chipset (PCI ones
 are detected automatically).
 
-================================================================================
-
-IDE ATAPI streaming tape driver
--------------------------------
-
-This driver is a part of the Linux ide driver and works in co-operation
-with linux/drivers/block/ide.c.
-
-The driver, in co-operation with ide.c, basically traverses the
-request-list for the block device interface. The character device
-interface, on the other hand, creates new requests, adds them
-to the request-list of the block device, and waits for their completion.
-
-Pipelined operation mode is now supported on both reads and writes.
-
-The block device major and minor numbers are determined from the
-tape's relative position in the ide interfaces, as explained in ide.c.
-
-The character device interface consists of the following devices:
-
- ht0		major 37, minor 0	first  IDE tape, rewind on close.
- ht1		major 37, minor 1	second IDE tape, rewind on close.
- ...
- nht0		major 37, minor 128	first  IDE tape, no rewind on close.
- nht1		major 37, minor 129	second IDE tape, no rewind on close.
- ...
-
-Run /dev/MAKEDEV to create the above entries.
-
-The general magnetic tape commands compatible interface, as defined by
-include/linux/mtio.h, is accessible through the character device.
-
-General ide driver configuration options, such as the interrupt-unmask
-flag, can be configured by issuing an ioctl to the block device interface,
-as any other ide device.
-
-Our own ide-tape ioctl's can be issued to either the block device or
-the character device interface.
-
-Maximal throughput with minimal bus load will usually be achieved in the
-following scenario:
-
-	1.	ide-tape is operating in the pipelined operation mode.
-	2.	No buffering is performed by the user backup program.
-
-
-
 ================================================================================
 
 Some Terminology

Documentation/kernel-parameters.txt

@@ -712,7 +712,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			Format: <cyl>,<head>,<sect>
 
 	hd?=		[HW] (E)IDE subsystem
-	hd?lun=		See Documentation/ide.txt.
+	hd?lun=		See Documentation/ide/ide.txt.
 
 	highmem=nn[KMG]	[KNL,BOOT] forces the highmem zone to have an exact
 			size of <nn>. This works even on boxes that have no
@@ -766,14 +766,14 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	ide=		[HW] (E)IDE subsystem
 			Format: ide=nodma or ide=doubler or ide=reverse
-			See Documentation/ide.txt.
+			See Documentation/ide/ide.txt.
 
 	ide?=		[HW] (E)IDE subsystem
 			Format: ide?=noprobe or chipset specific parameters.
-			See Documentation/ide.txt.
+			See Documentation/ide/ide.txt.
 
 	idebus=		[HW] (E)IDE subsystem - VLB/PCI bus speed
-			See Documentation/ide.txt.
+			See Documentation/ide/ide.txt.
 
 	idle=		[X86]
 			Format: idle=poll or idle=mwait

Documentation/kprobes.txt

@@ -192,7 +192,8 @@ code mapping.
 The Kprobes API includes a "register" function and an "unregister"
 function for each type of probe.  Here are terse, mini-man-page
 specifications for these functions and the associated probe handlers
-that you'll write.  See the latter half of this document for examples.
+that you'll write.  See the files in the samples/kprobes/ sub-directory
+for examples.
 
 4.1 register_kprobe
 
@@ -420,249 +421,15 @@ e. Watchpoint probes (which fire on data references).
 
 8. Kprobes Example
 
-Here's a sample kernel module showing the use of kprobes to dump a
-stack trace and selected i386 registers when do_fork() is called.
------ cut here -----
-/*kprobe_example.c*/
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/kprobes.h>
-#include <linux/sched.h>
-
-/*For each probe you need to allocate a kprobe structure*/
-static struct kprobe kp;
-
-/*kprobe pre_handler: called just before the probed instruction is executed*/
-int handler_pre(struct kprobe *p, struct pt_regs *regs)
-{
-	printk("pre_handler: p->addr=0x%p, eip=%lx, eflags=0x%lx\n",
-		p->addr, regs->eip, regs->eflags);
-	dump_stack();
-	return 0;
-}
-
-/*kprobe post_handler: called after the probed instruction is executed*/
-void handler_post(struct kprobe *p, struct pt_regs *regs, unsigned long flags)
-{
-	printk("post_handler: p->addr=0x%p, eflags=0x%lx\n",
-		p->addr, regs->eflags);
-}
-
-/* fault_handler: this is called if an exception is generated for any
- * instruction within the pre- or post-handler, or when Kprobes
- * single-steps the probed instruction.
- */
-int handler_fault(struct kprobe *p, struct pt_regs *regs, int trapnr)
-{
-	printk("fault_handler: p->addr=0x%p, trap #%dn",
-		p->addr, trapnr);
-	/* Return 0 because we don't handle the fault. */
-	return 0;
-}
-
-static int __init kprobe_init(void)
-{
-	int ret;
-	kp.pre_handler = handler_pre;
-	kp.post_handler = handler_post;
-	kp.fault_handler = handler_fault;
-	kp.symbol_name = "do_fork";
-
-	ret = register_kprobe(&kp);
-	if (ret < 0) {
-		printk("register_kprobe failed, returned %d\n", ret);
-		return ret;
-	}
-	printk("kprobe registered\n");
-	return 0;
-}
-
-static void __exit kprobe_exit(void)
-{
-	unregister_kprobe(&kp);
-	printk("kprobe unregistered\n");
-}
-
-module_init(kprobe_init)
-module_exit(kprobe_exit)
-MODULE_LICENSE("GPL");
------ cut here -----
-
-You can build the kernel module, kprobe-example.ko, using the following
-Makefile:
------ cut here -----
-obj-m := kprobe-example.o
-KDIR := /lib/modules/$(shell uname -r)/build
-PWD := $(shell pwd)
-default:
-	$(MAKE) -C $(KDIR) SUBDIRS=$(PWD) modules
-clean:
-	rm -f *.mod.c *.ko *.o
------ cut here -----
-
-$ make
-$ su -
-...
-# insmod kprobe-example.ko
-
-You will see the trace data in /var/log/messages and on the console
-whenever do_fork() is invoked to create a new process.
+See samples/kprobes/kprobe_example.c
 
 9. Jprobes Example
 
-Here's a sample kernel module showing the use of jprobes to dump
-the arguments of do_fork().
------ cut here -----
-/*jprobe-example.c */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/fs.h>
-#include <linux/uio.h>
-#include <linux/kprobes.h>
-
-/*
- * Jumper probe for do_fork.
- * Mirror principle enables access to arguments of the probed routine
- * from the probe handler.
- */
-
-/* Proxy routine having the same arguments as actual do_fork() routine */
-long jdo_fork(unsigned long clone_flags, unsigned long stack_start,
-	      struct pt_regs *regs, unsigned long stack_size,
-	      int __user * parent_tidptr, int __user * child_tidptr)
-{
-	printk("jprobe: clone_flags=0x%lx, stack_size=0x%lx, regs=0x%p\n",
-	       clone_flags, stack_size, regs);
-	/* Always end with a call to jprobe_return(). */
-	jprobe_return();
-	/*NOTREACHED*/
-	return 0;
-}
-
-static struct jprobe my_jprobe = {
-	.entry = jdo_fork
-};
-
-static int __init jprobe_init(void)
-{
-	int ret;
-	my_jprobe.kp.symbol_name = "do_fork";
-
-	if ((ret = register_jprobe(&my_jprobe)) <0) {
-		printk("register_jprobe failed, returned %d\n", ret);
-		return -1;
-	}
-	printk("Planted jprobe at %p, handler addr %p\n",
-	       my_jprobe.kp.addr, my_jprobe.entry);
-	return 0;
-}
-
-static void __exit jprobe_exit(void)
-{
-	unregister_jprobe(&my_jprobe);
-	printk("jprobe unregistered\n");
-}
-
-module_init(jprobe_init)
-module_exit(jprobe_exit)
-MODULE_LICENSE("GPL");
------ cut here -----
-
-Build and insert the kernel module as shown in the above kprobe
-example.  You will see the trace data in /var/log/messages and on
-the console whenever do_fork() is invoked to create a new process.
-(Some messages may be suppressed if syslogd is configured to
-eliminate duplicate messages.)
+See samples/kprobes/jprobe_example.c
 
 10. Kretprobes Example
 
-Here's a sample kernel module showing the use of return probes to
-report failed calls to sys_open().
------ cut here -----
-/*kretprobe-example.c*/
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/kprobes.h>
-#include <linux/ktime.h>
-
-/* per-instance private data */
-struct my_data {
-	ktime_t entry_stamp;
-};
-
-static const char *probed_func = "sys_open";
-
-/* Timestamp function entry. */
-static int entry_handler(struct kretprobe_instance *ri, struct pt_regs *regs)
-{
-	struct my_data *data;
-
-	if(!current->mm)
-		return 1; /* skip kernel threads */
-
-	data = (struct my_data *)ri->data;
-	data->entry_stamp = ktime_get();
-	return 0;
-}
-
-/* If the probed function failed, log the return value and duration.
- * Duration may turn out to be zero consistently, depending upon the
- * granularity of time accounting on the platform. */
-static int return_handler(struct kretprobe_instance *ri, struct pt_regs *regs)
-{
-	int retval = regs_return_value(regs);
-	struct my_data *data = (struct my_data *)ri->data;
-	s64 delta;
-	ktime_t now;
-
-	if (retval < 0) {
-		now = ktime_get();
-		delta = ktime_to_ns(ktime_sub(now, data->entry_stamp));
-		printk("%s: return val = %d (duration = %lld ns)\n",
-		       probed_func, retval, delta);
-	}
-	return 0;
-}
-
-static struct kretprobe my_kretprobe = {
-	.handler = return_handler,
-	.entry_handler = entry_handler,
-	.data_size = sizeof(struct my_data),
-	.maxactive = 20, /* probe up to 20 instances concurrently */
-};
-
-static int __init kretprobe_init(void)
-{
-	int ret;
-	my_kretprobe.kp.symbol_name = (char *)probed_func;
-
-	if ((ret = register_kretprobe(&my_kretprobe)) < 0) {
-		printk("register_kretprobe failed, returned %d\n", ret);
-		return -1;
-	}
-	printk("Kretprobe active on %s\n", my_kretprobe.kp.symbol_name);
-	return 0;
-}
-
-static void __exit kretprobe_exit(void)
-{
-	unregister_kretprobe(&my_kretprobe);
-	printk("kretprobe unregistered\n");
-	/* nmissed > 0 suggests that maxactive was set too low. */
-	printk("Missed probing %d instances of %s\n",
-	       my_kretprobe.nmissed, probed_func);
-}
-
-module_init(kretprobe_init)
-module_exit(kretprobe_exit)
-MODULE_LICENSE("GPL");
------ cut here -----
-
-Build and insert the kernel module as shown in the above kprobe
-example.  You will see the trace data in /var/log/messages and on the
-console whenever sys_open() returns a negative value.  (Some messages
-may be suppressed if syslogd is configured to eliminate duplicate
-messages.)
+See samples/kprobes/kretprobe_example.c
 
 For additional information on Kprobes, refer to the following URLs:
 http://www-106.ibm.com/developerworks/library/l-kprobes.html?ca=dgr-lnxw42Kprobe

Documentation/lguest/lguest.c

@@ -486,9 +486,12 @@ static void concat(char *dst, char *args[])
 	unsigned int i, len = 0;
 
 	for (i = 0; args[i]; i++) {
+		if (i) {
+			strcat(dst+len, " ");
+			len++;
+		}
 		strcpy(dst+len, args[i]);
-		strcat(dst+len, " ");
-		len += strlen(args[i]) + 1;
+		len += strlen(args[i]);
 	}
 	/* In case it's empty. */
 	dst[len] = '\0';

Documentation/pci.txt

@@ -123,7 +123,8 @@ initialization with a pointer to a structure describing the driver
 
 
 The ID table is an array of struct pci_device_id entries ending with an
-all-zero entry.  Each entry consists of:
+all-zero entry; use of the macro DEFINE_PCI_DEVICE_TABLE is the preferred
+method of declaring the table.  Each entry consists of:
 
 	vendor,device	Vendor and device ID to match (or PCI_ANY_ID)
 
@@ -191,7 +192,8 @@ Tips on when/where to use the above attributes:
 
 	o Do not mark the struct pci_driver.
 
-	o The ID table array should be marked __devinitdata.
+	o The ID table array should be marked __devinitconst; this is done
+	  automatically if the table is declared with DEFINE_PCI_DEVICE_TABLE().
 
 	o The probe() and remove() functions should be marked __devinit
 	  and __devexit respectively.  All initialization functions

Documentation/scheduler/sched-stats.txt

@@ -142,7 +142,7 @@ of idleness (idle, busy, and newly idle):
 
 /proc/<pid>/schedstat
 ----------------
-schedstats also adds a new /proc/<pid/schedstat file to include some of
+schedstats also adds a new /proc/<pid>/schedstat file to include some of
 the same information on a per-process level.  There are three fields in
 this file correlating for that process to:
      1) time spent on the cpu

Documentation/scsi/ChangeLog.arcmsr

@@ -109,4 +109,10 @@
 **						8.replace pci_alloc_consistent()/pci_free_consistent() with kmalloc()/kfree() in arcmsr_iop_message_xfer()
 **						9. fix the release of dma memory for type B in arcmsr_free_ccb_pool()
 **						10.fix the arcmsr_polling_hbb_ccbdone()
+** 1.20.00.15	02/27/2008	Erich Chen & Nick Cheng
+**						1.arcmsr_iop_message_xfer() is called from atomic context under the
+**						queuecommand scsi_host_template handler. James Bottomley pointed out
+**						that the current GFP_KERNEL|GFP_DMA flags are wrong: firstly we are in
+**						atomic context, secondly this memory is not used for DMA.
+**						Also removed some unneeded casts. Thanks to Daniel Drake <dsd@gentoo.org>
 **************************************************************************

Documentation/usb/usb-help.txt

@@ -1,5 +1,5 @@
 usb-help.txt
-2000-July-12
+2008-Mar-7
 
 For USB help other than the readme files that are located in
 Documentation/usb/*, see the following:
@@ -10,9 +10,7 @@ Linux-USB project:  http://www.linux-usb.org
 Linux USB Guide:    http://linux-usb.sourceforge.net
 Linux-USB device overview (working devices and drivers):
                     http://www.qbik.ch/usb/devices/
-    
-The Linux-USB mailing lists are:
-  linux-usb-users@lists.sourceforge.net   for general user help
-  linux-usb-devel@lists.sourceforge.net   for developer discussions
+
+The Linux-USB mailing list is at linux-usb@vger.kernel.org
 
 ###

Documentation/vm/slub.txt

@@ -50,14 +50,14 @@ F.e. in order to boot just with sanity checks and red zoning one would specify:
 
 Trying to find an issue in the dentry cache? Try
 
-	slub_debug=,dentry_cache
+	slub_debug=,dentry
 
 to only enable debugging on the dentry cache.
 
 Red zoning and tracking may realign the slab.  We can just apply sanity checks
 to the dentry cache with
 
-	slub_debug=F,dentry_cache
+	slub_debug=F,dentry
 
 In case you forgot to enable debugging on the kernel command line: It is
 possible to enable debugging manually when the kernel is up. Look at the

MAINTAINERS

@@ -767,14 +767,14 @@ S:	Maintained
 
 BLACKFIN ARCHITECTURE
 P:	Bryan Wu
-M:	bryan.wu@analog.com
+M:	cooloney@kernel.org
 L:	uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
 W:	http://blackfin.uclinux.org
 S:	Supported
 
 BLACKFIN EMAC DRIVER
 P:	Bryan Wu
-M:	bryan.wu@analog.com
+M:	cooloney@kernel.org
 L:	uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
 W:	http://blackfin.uclinux.org
 S:	Supported
@@ -982,6 +982,12 @@ M:	mchan@broadcom.com
 L:	netdev@vger.kernel.org
 S:	Supported
 
+BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER
+P:	Eliezer Tamir
+M:	eliezert@broadcom.com
+L:	netdev@vger.kernel.org
+S:	Supported
+
 BROADCOM TG3 GIGABIT ETHERNET DRIVER
 P:	Michael Chan
 M:	mchan@broadcom.com
@@ -1132,6 +1138,12 @@ L:	accessrunner-general@lists.sourceforge.net
 W:	http://accessrunner.sourceforge.net/
 S:	Maintained
 
+CONTROL GROUPS (CGROUPS)
+P:	Paul Menage
+M:	menage@google.com
+L:	containers@lists.linux-foundation.org
+S:	Maintained
+
 CORETEMP HARDWARE MONITORING DRIVER
 P:	Rudolf Marek
 M:	r.marek@assembler.cz
@@ -1583,6 +1595,13 @@ L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	http://linux-fbdev.sourceforge.net/
 S:	Maintained
 
+FREESCALE DMA DRIVER
+P;	Zhang Wei
+M:	wei.zhang@freescale.com
+L:	linuxppc-embedded@ozlabs.org
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+
 FREESCALE SOC FS_ENET DRIVER
 P:	Pantelis Antoniou
 M:	pantelis.antoniou@gmail.com
@@ -2033,43 +2052,19 @@ M:	kernel@wantstofly.org
 L:	netdev@vger.kernel.org
 S:	Maintained
 
-INTEL PRO/100 ETHERNET SUPPORT
-P:	Auke Kok
-M:	auke-jan.h.kok@intel.com
-P:	Jesse Brandeburg
-M:	jesse.brandeburg@intel.com
-P:	Jeff Kirsher
-M:	jeffrey.t.kirsher@intel.com
-P:	John Ronciak
-M:	john.ronciak@intel.com
-L:	e1000-devel@lists.sourceforge.net
-W:	http://sourceforge.net/projects/e1000/
-S:	Supported
-
-INTEL PRO/1000 GIGABIT ETHERNET SUPPORT
+INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/ixgb/ixgbe)
 P:	Auke Kok
 M:	auke-jan.h.kok@intel.com
 P:	Jesse Brandeburg
 M:	jesse.brandeburg@intel.com
 P:	Jeff Kirsher
 M:	jeffrey.t.kirsher@intel.com
+P:	Bruce Allan
+M:	bruce.w.allan@intel.com
 P:	John Ronciak
 M:	john.ronciak@intel.com
 L:	e1000-devel@lists.sourceforge.net
-W:	http://sourceforge.net/projects/e1000/
-S:	Supported
-
-INTEL PRO/10GbE SUPPORT
-P:	Ayyappan Veeraiyan
-M:	ayyappan.veeraiyan@intel.com
-P:	Auke Kok
-M:	auke-jan.h.kok@intel.com
-P:	Jesse Brandeburg
-M:	jesse.brandeburg@intel.com
-P:	John Ronciak
-M:	john.ronciak@intel.com
-L:	e1000-devel@lists.sourceforge.net
-W:	http://sourceforge.net/projects/e1000/
+W:	http://e1000.sourceforge.net/
 S:	Supported
 
 INTEL PRO/WIRELESS 2100 NETWORK CONNECTION SUPPORT
@@ -2137,7 +2132,7 @@ L:	netdev@vger.kernel.org
 S:	Maintained
 
 IPATH DRIVER:
-P:	Arthur Jones
+P:	Ralph Campbell
 M:	infinipath@qlogic.com
 L:	general@lists.openfabrics.org
 T:	git git://git.qlogic.com/ipath-linux-2.6
@@ -2620,6 +2615,17 @@ L:	linux-kernel@vger.kernel.org
 W:	http://www.linux-mm.org
 S:	Maintained
 
+MEMORY RESOURCE CONTROLLER
+P:	Balbir Singh
+M:	balbir@linux.vnet.ibm.com
+P:	Pavel Emelyanov
+M:	xemul@openvz.org
+P:	KAMEZAWA Hiroyuki
+M:	kamezawa.hiroyu@jp.fujitsu.com
+L:	linux-mm@kvack.org
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+
 MEI MN10300/AM33 PORT
 P:	David Howells
 M:	dhowells@redhat.com
@@ -2744,6 +2750,8 @@ S:	Maintained
 NETEFFECT IWARP RNIC DRIVER (IW_NES)
 P:	Faisal Latif
 M:	flatif@neteffect.com
+P:	Nishi Gupta
+M:	ngupta@neteffect.com
 P:	Glenn Streiff
 M:	gstreiff@neteffect.com
 L:	general@lists.openfabrics.org
@@ -3884,10 +3892,13 @@ M:	trivial@kernel.org
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 
-TULIP NETWORK DRIVER
-L:	tulip-users@lists.sourceforge.net
-W:	http://sourceforge.net/projects/tulip/
-S:	Orphan
+TULIP NETWORK DRIVERS
+P:	Grant Grundler
+M:	grundler@parisc-linux.org
+P:	Kyle McMartin
+M:	kyle@parisc-linux.org
+L:	netdev@vger.kernel.org
+S:	Maintained
 
 TUN/TAP driver
 P:	Maxim Krasnyansky

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 25
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc5
 NAME = Funky Weasel is Jiggy wit it
 
 # *DOCUMENTATION*

arch/Kconfig

@@ -27,5 +27,12 @@ config KPROBES
 	  for kernel debugging, non-intrusive instrumentation and testing.
 	  If in doubt, say "N".
 
+config KRETPROBES
+	def_bool y
+	depends on KPROBES && HAVE_KRETPROBES
+
 config HAVE_KPROBES
 	def_bool n
+
+config HAVE_KRETPROBES
+	def_bool n

arch/alpha/kernel/pci_iommu.c

@@ -31,7 +31,6 @@
 #endif
 
 #define DEBUG_NODIRECT 0
-#define DEBUG_FORCEDAC 0
 
 #define ISA_DMA_MASK		0x00ffffff
 
@@ -126,39 +125,66 @@ iommu_arena_new(struct pci_controller *hose, dma_addr_t base,
 	return iommu_arena_new_node(0, hose, base, window_size, align);
 }
 
+static inline int is_span_boundary(unsigned int index, unsigned int nr,
+				   unsigned long shift,
+				   unsigned long boundary_size)
+{
+	shift = (shift + index) & (boundary_size - 1);
+	return shift + nr > boundary_size;
+}
+
 /* Must be called with the arena lock held */
 static long
-iommu_arena_find_pages(struct pci_iommu_arena *arena, long n, long mask)
+iommu_arena_find_pages(struct device *dev, struct pci_iommu_arena *arena,
+		       long n, long mask)
 {
 	unsigned long *ptes;
 	long i, p, nent;
+	int pass = 0;
+	unsigned long base;
+	unsigned long boundary_size;
+
+	base = arena->dma_base >> PAGE_SHIFT;
+	if (dev) {
+		boundary_size = dma_get_seg_boundary(dev) + 1;
+		BUG_ON(!is_power_of_2(boundary_size));
+		boundary_size >>= PAGE_SHIFT;
+	} else {
+		boundary_size = 1UL << (32 - PAGE_SHIFT);
+	}
 
 	/* Search forward for the first mask-aligned sequence of N free ptes */
 	ptes = arena->ptes;
 	nent = arena->size >> PAGE_SHIFT;
-	p = (arena->next_entry + mask) & ~mask;
+	p = ALIGN(arena->next_entry, mask + 1);
 	i = 0;
+
+again:
 	while (i < n && p+i < nent) {
+		if (!i && is_span_boundary(p, n, base, boundary_size)) {
+			p = ALIGN(p + 1, mask + 1);
+			goto again;
+		}
+
 		if (ptes[p+i])
-			p = (p + i + 1 + mask) & ~mask, i = 0;
+			p = ALIGN(p + i + 1, mask + 1), i = 0;
 		else
 			i = i + 1;
 	}
 
 	if (i < n) {
-                /* Reached the end.  Flush the TLB and restart the
-                   search from the beginning.  */
-		alpha_mv.mv_pci_tbi(arena->hose, 0, -1);
-
-		p = 0, i = 0;
-		while (i < n && p+i < nent) {
-			if (ptes[p+i])
-				p = (p + i + 1 + mask) & ~mask, i = 0;
-			else
-				i = i + 1;
-		}
-
-		if (i < n)
+		if (pass < 1) {
+			/*
+			 * Reached the end.  Flush the TLB and restart
+			 * the search from the beginning.
+			*/
+			alpha_mv.mv_pci_tbi(arena->hose, 0, -1);
+
+			pass++;
+			p = 0;
+			i = 0;
+			goto again;
+		} else
 			return -1;
 	}
 
@@ -168,7 +194,8 @@ iommu_arena_find_pages(struct pci_iommu_arena *arena, long n, long mask)
 }
 
 static long
-iommu_arena_alloc(struct pci_iommu_arena *arena, long n, unsigned int align)
+iommu_arena_alloc(struct device *dev, struct pci_iommu_arena *arena, long n,
+		  unsigned int align)
 {
 	unsigned long flags;
 	unsigned long *ptes;
@@ -179,7 +206,7 @@ iommu_arena_alloc(struct pci_iommu_arena *arena, long n, unsigned int align)
 	/* Search for N empty ptes */
 	ptes = arena->ptes;
 	mask = max(align, arena->align_entry) - 1;
-	p = iommu_arena_find_pages(arena, n, mask);
+	p = iommu_arena_find_pages(dev, arena, n, mask);
 	if (p < 0) {
 		spin_unlock_irqrestore(&arena->lock, flags);
 		return -1;
@@ -229,6 +256,7 @@ pci_map_single_1(struct pci_dev *pdev, void *cpu_addr, size_t size,
 	unsigned long paddr;
 	dma_addr_t ret;
 	unsigned int align = 0;
+	struct device *dev = pdev ? &pdev->dev : NULL;
 
 	paddr = __pa(cpu_addr);
 
@@ -276,7 +304,7 @@ pci_map_single_1(struct pci_dev *pdev, void *cpu_addr, size_t size,
 	/* Force allocation to 64KB boundary for ISA bridges. */
 	if (pdev && pdev == isa_bridge)
 		align = 8;
-	dma_ofs = iommu_arena_alloc(arena, npages, align);
+	dma_ofs = iommu_arena_alloc(dev, arena, npages, align);
 	if (dma_ofs < 0) {
 		printk(KERN_WARNING "pci_map_single failed: "
 		       "could not allocate dma page tables\n");
@@ -563,7 +591,7 @@ sg_fill(struct device *dev, struct scatterlist *leader, struct scatterlist *end,
 
 	paddr &= ~PAGE_MASK;
 	npages = calc_npages(paddr + size);
-	dma_ofs = iommu_arena_alloc(arena, npages, 0);
+	dma_ofs = iommu_arena_alloc(dev, arena, npages, 0);
 	if (dma_ofs < 0) {
 		/* If we attempted a direct map above but failed, die.  */
 		if (leader->dma_address == 0)
@@ -830,7 +858,7 @@ iommu_reserve(struct pci_iommu_arena *arena, long pg_count, long align_mask)
 
 	/* Search for N empty ptes.  */
 	ptes = arena->ptes;
-	p = iommu_arena_find_pages(arena, pg_count, align_mask);
+	p = iommu_arena_find_pages(NULL, arena, pg_count, align_mask);
 	if (p < 0) {
 		spin_unlock_irqrestore(&arena->lock, flags);
 		return -1;

arch/arm/Kconfig

@@ -12,6 +12,7 @@ config ARM
 	select SYS_SUPPORTS_APM_EMULATION
 	select HAVE_OPROFILE
 	select HAVE_KPROBES if (!XIP_KERNEL)
+	select HAVE_KRETPROBES if (HAVE_KPROBES)
 	help
 	  The ARM series is a line of low-power-consumption RISC chip designs
 	  licensed by ARM Ltd and targeted at embedded applications and
@@ -939,7 +940,8 @@ config KEXEC
 
 config ATAGS_PROC
 	bool "Export atags in procfs"
-	default n
+	depends on KEXEC
+	default y
 	help
 	  Should the atags used to boot the kernel be exported in an "atags"
 	  file in procfs. Useful with kexec.

arch/arm/mach-pxa/cpu-pxa.c

@@ -43,7 +43,7 @@
 
 #ifdef DEBUG
 static unsigned int freq_debug;
-MODULE_PARM(freq_debug, "i");
+module_param(freq_debug, uint, 0);
 MODULE_PARM_DESC(freq_debug, "Set the debug messages to on=1/off=0");
 #else
 #define freq_debug  0

arch/arm/mach-pxa/pxa3xx.c

@@ -129,28 +129,20 @@ static void clk_pxa3xx_cken_enable(struct clk *clk)
 {
 	unsigned long mask = 1ul << (clk->cken & 0x1f);
 
-	local_irq_disable();
-
 	if (clk->cken < 32)
 		CKENA |= mask;
 	else
 		CKENB |= mask;
-
-	local_irq_enable();
 }
 
 static void clk_pxa3xx_cken_disable(struct clk *clk)
 {
 	unsigned long mask = 1ul << (clk->cken & 0x1f);
 
-	local_irq_disable();
-
 	if (clk->cken < 32)
 		CKENA &= ~mask;
 	else
 		CKENB &= ~mask;
-
-	local_irq_enable();
 }
 
 static const struct clkops clk_pxa3xx_cken_ops = {

arch/arm/mach-pxa/zylonite.c

@@ -58,7 +58,7 @@ static struct platform_device smc91x_device = {
 	.resource	= smc91x_resources,
 };
 
-#if defined(CONFIG_FB_PXA) || (CONFIG_FB_PXA_MODULES)
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 static void zylonite_backlight_power(int on)
 {
 	gpio_set_value(gpio_backlight, on);

arch/arm/mm/mmap.c

@@ -120,6 +120,8 @@ full_search:
  */
 int valid_phys_addr_range(unsigned long addr, size_t size)
 {
+	if (addr < PHYS_OFFSET)
+		return 0;
 	if (addr + size > __pa(high_memory))
 		return 0;
 

arch/arm/mm/pgd.c

@@ -75,7 +75,7 @@ no_pgd:
 void free_pgd_slow(struct mm_struct *mm, pgd_t *pgd)
 {
 	pmd_t *pmd;
-	struct page *pte;
+	pgtable_t pte;
 
 	if (!pgd)
 		return;
@@ -90,10 +90,8 @@ void free_pgd_slow(struct mm_struct *mm, pgd_t *pgd)
 		goto free;
 	}
 
-	pte = pmd_page(*pmd);
+	pte = pmd_pgtable(*pmd);
 	pmd_clear(pmd);
-	dec_zone_page_state(virt_to_page((unsigned long *)pgd), NR_PAGETABLE);
-	pte_lock_deinit(pte);
 	pte_free(mm, pte);
 	pmd_free(mm, pmd);
 free:

arch/avr32/boards/atstk1000/atstk1004.c

@@ -129,7 +129,7 @@ static int __init atstk1004_init(void)
 #ifdef CONFIG_BOARD_ATSTK100X_SPI1
 	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
 #endif
-#ifndef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
+#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
 	at32_add_device_mci(0);
 #endif
 	at32_add_device_lcdc(0, &atstk1000_lcdc_data,

arch/avr32/kernel/process.c

@@ -11,6 +11,7 @@
 #include <linux/fs.h>
 #include <linux/ptrace.h>
 #include <linux/reboot.h>
+#include <linux/tick.h>
 #include <linux/uaccess.h>
 #include <linux/unistd.h>
 
@@ -30,8 +31,10 @@ void cpu_idle(void)
 {
 	/* endless idle loop with no priority at all */
 	while (1) {
+		tick_nohz_stop_sched_tick();
 		while (!need_resched())
 			cpu_idle_sleep();
+		tick_nohz_restart_sched_tick();
 		preempt_enable_no_resched();
 		schedule();
 		preempt_disable();
@@ -345,6 +348,7 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
 	p->thread.cpu_context.ksp = (unsigned long)childregs;
 	p->thread.cpu_context.pc = (unsigned long)ret_from_fork;
 
+	clear_tsk_thread_flag(p, TIF_DEBUG);
 	if ((clone_flags & CLONE_PTRACE) && test_thread_flag(TIF_DEBUG))
 		ocd_enable(p);
 

arch/avr32/mm/fault.c

@@ -189,6 +189,8 @@ no_context:
 
 	page = sysreg_read(PTBR);
 	printk(KERN_ALERT "ptbr = %08lx", page);
+	if (address >= TASK_SIZE)
+		page = (unsigned long)swapper_pg_dir;
 	if (page) {
 		page = ((unsigned long *)page)[address >> 22];
 		printk(" pgd = %08lx", page);

arch/blackfin/Makefile

@@ -98,8 +98,11 @@ drivers-$(CONFIG_OPROFILE) += arch/$(ARCH)/oprofile/
 #	them changed.  We use .mach to indicate when they were updated
 #	last, otherwise make uses the target directory mtime.
 
+       show_mach_symlink = :
+ quiet_show_mach_symlink = echo '  SYMLINK include/asm-$(ARCH)/mach-$(MACHINE) -> include/asm-$(ARCH)/mach'
+silent_show_mach_symlink = :
 include/asm-blackfin/.mach: $(wildcard include/config/arch/*.h) include/config/auto.conf
-	@echo '  SYMLINK include/asm-$(ARCH)/mach-$(MACHINE) -> include/asm-$(ARCH)/mach'
+	@$($(quiet)show_mach_symlink)
 ifneq ($(KBUILD_SRC),)
 	$(Q)mkdir -p include/asm-$(ARCH)
 	$(Q)ln -fsn $(srctree)/include/asm-$(ARCH)/mach-$(MACHINE) include/asm-$(ARCH)/mach

arch/blackfin/configs/BF527-EZKIT_defconfig

@@ -1,7 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.14
-# Thu Nov 29 17:32:47 2007
+# Linux kernel version: 2.6.22.16
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -116,7 +115,10 @@ CONFIG_PREEMPT_VOLUNTARY=y
 # Processor and Board Settings
 #
 # CONFIG_BF522 is not set
+# CONFIG_BF523 is not set
+# CONFIG_BF524 is not set
 # CONFIG_BF525 is not set
+# CONFIG_BF526 is not set
 CONFIG_BF527=y
 # CONFIG_BF531 is not set
 # CONFIG_BF532 is not set
@@ -306,6 +308,7 @@ CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_WB is not set
 CONFIG_BFIN_WT=y
 CONFIG_L1_MAX_PIECE=16
+# CONFIG_MPU is not set
 
 #
 # Asynchonous Memory Configuration
@@ -354,6 +357,7 @@ CONFIG_BINFMT_ZFLAT=y
 # Power management options
 #
 # CONFIG_PM is not set
+# CONFIG_PM_WAKEUP_BY_GPIO is not set
 
 #
 # Networking
@@ -496,7 +500,6 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_INTELEXT is not set
 # CONFIG_MTD_CFI_AMDSTD is not set
 # CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_MW320D=m
 CONFIG_MTD_RAM=y
 CONFIG_MTD_ROM=m
 # CONFIG_MTD_ABSENT is not set
@@ -506,9 +509,6 @@ CONFIG_MTD_ROM=m
 #
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 # CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_BF5xx=m
-CONFIG_BFIN_FLASH_SIZE=0x400000
-CONFIG_EBIU_FLASH_BASE=0x20000000
 # CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -684,7 +684,6 @@ CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_POWERMATE is not set
 # CONFIG_INPUT_YEALINK is not set
 # CONFIG_INPUT_UINPUT is not set
-# CONFIG_BF53X_PFBUTTONS is not set
 # CONFIG_TWI_KEYPAD is not set
 
 #
@@ -702,12 +701,12 @@ CONFIG_INPUT_MISC=y
 # CONFIG_BF5xx_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
 # CONFIG_BF5xx_PPI is not set
+CONFIG_BFIN_OTP=y
+# CONFIG_BFIN_OTP_WRITE_ENABLE is not set
 # CONFIG_BFIN_SPORT is not set
 # CONFIG_BFIN_TIMER_LATENCY is not set
 # CONFIG_TWI_LCD is not set
 # CONFIG_AD5304 is not set
-# CONFIG_BF5xx_TEA5764 is not set
-# CONFIG_BF5xx_FBDMA is not set
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
@@ -772,7 +771,6 @@ CONFIG_I2C_CHARDEV=m
 #
 # I2C Hardware Bus support
 #
-# CONFIG_I2C_BLACKFIN_GPIO is not set
 CONFIG_I2C_BLACKFIN_TWI=m
 CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
 # CONFIG_I2C_GPIO is not set

arch/blackfin/configs/BF533-EZKIT_defconfig

@@ -322,10 +322,9 @@ CONFIG_PM=y
 # CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
 # CONFIG_PM_SYSFS_DEPRECATED is not set
-CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y
+CONFIG_PM_BFIN_SLEEP_DEEPER=y
+# CONFIG_PM_BFIN_SLEEP is not set
 # CONFIG_PM_WAKEUP_BY_GPIO is not set
-# CONFIG_PM_WAKEUP_GPIO_API is not set
-CONFIG_PM_WAKEUP_SIC_IWR=0x80
 
 #
 # CPU Frequency scaling
@@ -697,7 +696,6 @@ CONFIG_SERIAL_BFIN_DMA=y
 # CONFIG_SERIAL_BFIN_PIO is not set
 CONFIG_SERIAL_BFIN_UART0=y
 # CONFIG_BFIN_UART0_CTSRTS is not set
-# CONFIG_SERIAL_BFIN_UART1 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set

arch/blackfin/configs/BF533-STAMP_defconfig

@@ -323,10 +323,9 @@ CONFIG_PM=y
 # CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
 # CONFIG_PM_SYSFS_DEPRECATED is not set
-CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y
+CONFIG_PM_BFIN_SLEEP_DEEPER=y
+# CONFIG_PM_BFIN_SLEEP is not set
 # CONFIG_PM_WAKEUP_BY_GPIO is not set
-# CONFIG_PM_WAKEUP_GPIO_API is not set
-CONFIG_PM_WAKEUP_SIC_IWR=0x80
 
 #
 # CPU Frequency scaling
@@ -714,7 +713,6 @@ CONFIG_SERIAL_BFIN_DMA=y
 # CONFIG_SERIAL_BFIN_PIO is not set
 CONFIG_SERIAL_BFIN_UART0=y
 # CONFIG_BFIN_UART0_CTSRTS is not set
-# CONFIG_SERIAL_BFIN_UART1 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set

arch/blackfin/configs/BF537-STAMP_defconfig

@@ -330,10 +330,9 @@ CONFIG_PM=y
 # CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
 # CONFIG_PM_SYSFS_DEPRECATED is not set
-CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y
+CONFIG_PM_BFIN_SLEEP_DEEPER=y
+# CONFIG_PM_BFIN_SLEEP is not set
 # CONFIG_PM_WAKEUP_BY_GPIO is not set
-# CONFIG_PM_WAKEUP_GPIO_API is not set
-CONFIG_PM_WAKEUP_SIC_IWR=0x8
 
 #
 # CPU Frequency scaling
@@ -1013,6 +1012,7 @@ CONFIG_SND_BFIN_AD73311_SE=4
 CONFIG_SND_SOC_AC97_BUS=y
 CONFIG_SND_SOC=m
 CONFIG_SND_BF5XX_SOC=m
+CONFIG_SND_MMAP_SUPPORT=y
 CONFIG_SND_BF5XX_SOC_AC97=m
 # CONFIG_SND_BF5XX_SOC_WM8750 is not set
 # CONFIG_SND_BF5XX_SOC_WM8731 is not set

arch/blackfin/configs/BF548-EZKIT_defconfig

@@ -396,6 +396,7 @@ CONFIG_BINFMT_ZFLAT=y
 # Power management options
 #
 # CONFIG_PM is not set
+# CONFIG_PM_WAKEUP_BY_GPIO is not set
 
 #
 # CPU Frequency scaling
@@ -1075,6 +1076,7 @@ CONFIG_SND_VERBOSE_PROCFS=y
 CONFIG_SND_SOC_AC97_BUS=y
 CONFIG_SND_SOC=y
 CONFIG_SND_BF5XX_SOC=y
+CONFIG_SND_MMAP_SUPPORT=y
 CONFIG_SND_BF5XX_SOC_AC97=y
 CONFIG_SND_BF5XX_SOC_BF548_EZKIT=y
 # CONFIG_SND_BF5XX_SOC_WM8750 is not set

arch/blackfin/configs/BF561-EZKIT_defconfig

@@ -367,6 +367,7 @@ CONFIG_BINFMT_ZFLAT=y
 # Power management options
 #
 # CONFIG_PM is not set
+# CONFIG_PM_WAKEUP_BY_GPIO is not set
 
 #
 # Networking

arch/blackfin/kernel/bfin_dma_5xx.c

@@ -105,13 +105,14 @@ int request_dma(unsigned int channel, char *device_id)
 	mutex_unlock(&(dma_ch[channel].dmalock));
 
 #ifdef CONFIG_BF54x
-	if (channel >= CH_UART2_RX && channel <= CH_UART3_TX &&
-		strncmp(device_id, "BFIN_UART", 9) == 0)
-		dma_ch[channel].regs->peripheral_map |=
-			(channel - CH_UART2_RX + 0xC);
-	else
-		dma_ch[channel].regs->peripheral_map |=
-			(channel - CH_UART2_RX + 0x6);
+	if (channel >= CH_UART2_RX && channel <= CH_UART3_TX) {
+		if (strncmp(device_id, "BFIN_UART", 9) == 0)
+			dma_ch[channel].regs->peripheral_map |=
+				(channel - CH_UART2_RX + 0xC);
+		else
+			dma_ch[channel].regs->peripheral_map |=
+				(channel - CH_UART2_RX + 0x6);
+	}
 #endif
 
 	dma_ch[channel].device_id = device_id;

arch/blackfin/kernel/fixed_code.S

@@ -101,9 +101,9 @@ ENDPROC (_atomic_ior32)
 
 .align 16
 	/*
-	 * Atomic ior, 32 bit.
+	 * Atomic and, 32 bit.
 	 * Inputs:	P0: memory address to use
-	 *		R0: value to ior
+	 *		R0: value to and
 	 * Outputs:	R0: new contents of the memory address.
 	 *		R1: previous contents of the memory address.
 	 */
@@ -112,13 +112,13 @@ ENTRY(_atomic_and32)
 	R0 = R1 & R0;
 	[P0] = R0;
 	rts;
-ENDPROC (_atomic_ior32)
+ENDPROC (_atomic_and32)
 
 .align 16
 	/*
-	 * Atomic ior, 32 bit.
+	 * Atomic xor, 32 bit.
 	 * Inputs:	P0: memory address to use
-	 *		R0: value to ior
+	 *		R0: value to xor
 	 * Outputs:	R0: new contents of the memory address.
 	 *		R1: previous contents of the memory address.
 	 */
@@ -127,7 +127,7 @@ ENTRY(_atomic_xor32)
 	R0 = R1 ^ R0;
 	[P0] = R0;
 	rts;
-ENDPROC (_atomic_ior32)
+ENDPROC (_atomic_xor32)
 
 .align 16
 	/*

arch/blackfin/kernel/gptimers.c

@@ -1,9 +1,9 @@
 /*
- * bfin_gptimers.c - derived from bf53x_timers.c
- *  Driver for General Purpose Timer functions on the Blackfin processor
+ * gptimers.c - Blackfin General Purpose Timer core API
  *
- *  Copyright (C) 2005 John DeHority
- *  Copyright (C) 2006 Hella Aglaia GmbH (awe@aglaia-gmbh.de)
+ * Copyright (c) 2005-2008 Analog Devices Inc.
+ * Copyright (C) 2005 John DeHority
+ * Copyright (C) 2006 Hella Aglaia GmbH (awe@aglaia-gmbh.de)
  *
  * Licensed under the GPLv2.
  */

arch/blackfin/kernel/setup.c

@@ -32,6 +32,7 @@
 static DEFINE_PER_CPU(struct cpu, cpu_devices);
 
 u16 _bfin_swrst;
+EXPORT_SYMBOL(_bfin_swrst);
 
 unsigned long memory_start, memory_end, physical_mem_end;
 unsigned long reserved_mem_dcache_on;
@@ -514,6 +515,7 @@ static __init void  memory_setup(void)
 	printk(KERN_INFO "Kernel Managed Memory: %ldMB\n", _ramend >> 20);
 
 	printk(KERN_INFO "Memory map:\n"
+		KERN_INFO "  fixedcode = 0x%p-0x%p\n"
 		KERN_INFO "  text      = 0x%p-0x%p\n"
 		KERN_INFO "  rodata    = 0x%p-0x%p\n"
 		KERN_INFO "  bss       = 0x%p-0x%p\n"
@@ -527,7 +529,8 @@ static __init void  memory_setup(void)
 #if DMA_UNCACHED_REGION > 0
 		KERN_INFO "  DMA Zone  = 0x%p-0x%p\n"
 #endif
-		, _stext, _etext,
+		, (void *)FIXED_CODE_START, (void *)FIXED_CODE_END,
+		_stext, _etext,
 		__start_rodata, __end_rodata,
 		__bss_start, __bss_stop,
 		_sdata, _edata,

arch/blackfin/kernel/vmlinux.lds.S

@@ -147,44 +147,64 @@ SECTIONS
 
 	__l1_lma_start = .;
 
+#if L1_CODE_LENGTH
+# define LDS_L1_CODE *(.l1.text)
+#else
+# define LDS_L1_CODE
+#endif
 	.text_l1 L1_CODE_START : AT(LOADADDR(.init.ramfs) + SIZEOF(.init.ramfs))
 	{
 		. = ALIGN(4);
 		__stext_l1 = .;
-		*(.l1.text)
-
+		LDS_L1_CODE
 		. = ALIGN(4);
 		__etext_l1 = .;
 	}
 
+#if L1_DATA_A_LENGTH
+# define LDS_L1_A_DATA  *(.l1.data)
+# define LDS_L1_A_BSS   *(.l1.bss)
+# define LDS_L1_A_CACHE *(.data_l1.cacheline_aligned)
+#else
+# define LDS_L1_A_DATA
+# define LDS_L1_A_BSS
+# define LDS_L1_A_CACHE
+#endif
 	.data_l1 L1_DATA_A_START : AT(LOADADDR(.text_l1) + SIZEOF(.text_l1))
 	{
 		. = ALIGN(4);
 		__sdata_l1 = .;
-		*(.l1.data)
+		LDS_L1_A_DATA
 		__edata_l1 = .;
 
 		. = ALIGN(4);
 		__sbss_l1 = .;
-		*(.l1.bss)
+		LDS_L1_A_BSS
 
 		. = ALIGN(32);
-		*(.data_l1.cacheline_aligned)
+		LDS_L1_A_CACHE
 
 		. = ALIGN(4);
 		__ebss_l1 = .;
 	}
 
+#if L1_DATA_B_LENGTH
+# define LDS_L1_B_DATA  *(.l1.data.B)
+# define LDS_L1_B_BSS   *(.l1.bss.B)
+#else
+# define LDS_L1_B_DATA
+# define LDS_L1_B_BSS
+#endif
 	.data_b_l1 L1_DATA_B_START : AT(LOADADDR(.data_l1) + SIZEOF(.data_l1))
 	{
 		. = ALIGN(4);
 		__sdata_b_l1 = .;
-		*(.l1.data.B)
+		LDS_L1_B_DATA
 		__edata_b_l1 = .;
 
 		. = ALIGN(4);
 		__sbss_b_l1 = .;
-		*(.l1.bss.B)
+		LDS_L1_B_BSS
 
 		. = ALIGN(4);
 		__ebss_b_l1 = .;

arch/blackfin/mach-bf527/boards/ezkit.c

@@ -180,8 +180,8 @@ static struct mtd_partition partition_info[] = {
 	},
 	{
 		.name = "File System",
-		.offset = 4 * SIZE_1M,
-		.size = (256 - 4) * SIZE_1M,
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
 	},
 };
 
@@ -422,11 +422,11 @@ static struct mtd_partition bfin_spi_flash_partitions[] = {
 	}, {
 		.name = "kernel",
 		.size = 0xe0000,
-		.offset = 0x20000
+		.offset = MTDPART_OFS_APPEND,
 	}, {
 		.name = "file system",
-		.size = 0x700000,
-		.offset = 0x00100000,
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
 	}
 };
 
@@ -484,13 +484,6 @@ static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE)
-static struct bfin5xx_spi_chip ad5304_chip_info = {
-	.enable_dma = 0,
-	.bits_per_word = 16,
-};
-#endif
-
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
 	.enable_dma = 0,
@@ -611,17 +604,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_3,
 	},
 #endif
-#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE)
-	{
-		.modalias = "ad5304_spi",
-		.max_speed_hz = 1250000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 2,
-		.platform_data = NULL,
-		.controller_data = &ad5304_chip_info,
-		.mode = SPI_MODE_2,
-	},
-#endif
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 	{
 		.modalias		= "ad7877",
@@ -818,6 +800,19 @@ static struct platform_device bfin_device_gpiokeys = {
 };
 #endif
 
+static struct resource bfin_gpios_resources = {
+	.start = 0,
+	.end   = MAX_BLACKFIN_GPIOS - 1,
+	.flags = IORESOURCE_IRQ,
+};
+
+static struct platform_device bfin_gpios_device = {
+	.name = "simple-gpio",
+	.id = -1,
+	.num_resources = 1,
+	.resource = &bfin_gpios_resources,
+};
+
 static struct platform_device *stamp_devices[] __initdata = {
 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
 	&bf5xx_nand_device,
@@ -895,6 +890,8 @@ static struct platform_device *stamp_devices[] __initdata = {
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 	&bfin_device_gpiokeys,
 #endif
+
+	&bfin_gpios_device,
 };
 
 static int __init stamp_init(void)
@@ -921,13 +918,18 @@ void native_machine_restart(char *cmd)
 		bfin_gpio_reset_spi0_ssel1();
 }
 
-/*
- * Currently the MAC address is saved in Flash by U-Boot
- */
-#define FLASH_MAC	0x203f0000
 void bfin_get_ether_addr(char *addr)
 {
-	*(u32 *)(&(addr[0])) = bfin_read32(FLASH_MAC);
-	*(u16 *)(&(addr[4])) = bfin_read16(FLASH_MAC + 4);
+	/* the MAC is stored in OTP memory page 0xDF */
+	u32 ret;
+	u64 otp_mac;
+	u32 (*otp_read)(u32 page, u32 flags, u64 *page_content) = (void *)0xEF00001A;
+
+	ret = otp_read(0xDF, 0x00, &otp_mac);
+	if (!(ret & 0x1)) {
+		char *otp_mac_p = (char *)&otp_mac;
+		for (ret = 0; ret < 6; ++ret)
+			addr[ret] = otp_mac_p[5 - ret];
+	}
 }
 EXPORT_SYMBOL(bfin_get_ether_addr);

arch/blackfin/mach-bf533/boards/ezkit.c

@@ -99,11 +99,11 @@ static struct mtd_partition bfin_spi_flash_partitions[] = {
 	}, {
 		.name = "kernel",
 		.size = 0xe0000,
-		.offset = 0x20000
+		.offset = MTDPART_OFS_APPEND,
 	}, {
 		.name = "file system",
-		.size = 0x700000,
-		.offset = 0x00100000,
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
 	}
 };
 
@@ -298,6 +298,19 @@ static struct platform_device bfin_device_gpiokeys = {
 };
 #endif
 
+static struct resource bfin_gpios_resources = {
+	.start = 0,
+	.end   = MAX_BLACKFIN_GPIOS - 1,
+	.flags = IORESOURCE_IRQ,
+};
+
+static struct platform_device bfin_gpios_device = {
+	.name = "simple-gpio",
+	.id = -1,
+	.num_resources = 1,
+	.resource = &bfin_gpios_resources,
+};
+
 #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
 #include <linux/i2c-gpio.h>
 
@@ -350,6 +363,8 @@ static struct platform_device *ezkit_devices[] __initdata = {
 #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
 	&i2c_gpio_device,
 #endif
+
+	&bfin_gpios_device,
 };
 
 static int __init ezkit_init(void)

arch/blackfin/mach-bf533/boards/stamp.c

@@ -112,7 +112,7 @@ static struct platform_device net2272_bfin_device = {
 static struct mtd_partition stamp_partitions[] = {
 	{
 		.name   = "Bootloader",
-		.size   = 0x20000,
+		.size   = 0x40000,
 		.offset = 0,
 	}, {
 		.name   = "Kernel",
@@ -160,17 +160,17 @@ static struct platform_device stamp_flash_device = {
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
 		.name = "bootloader",
-		.size = 0x00020000,
+		.size = 0x00040000,
 		.offset = 0,
 		.mask_flags = MTD_CAP_ROM
 	}, {
 		.name = "kernel",
 		.size = 0xe0000,
-		.offset = 0x20000
+		.offset = MTDPART_OFS_APPEND,
 	}, {
 		.name = "file system",
-		.size = 0x700000,
-		.offset = 0x00100000,
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
 	}
 };
 
@@ -212,13 +212,6 @@ static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE)
-static struct bfin5xx_spi_chip ad5304_chip_info = {
-	.enable_dma = 0,
-	.bits_per_word = 16,
-};
-#endif
-
 #if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
 static struct bfin5xx_spi_chip spi_mmc_chip_info = {
 	.enable_dma = 1,
@@ -308,17 +301,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE)
-	{
-		.modalias = "ad5304_spi",
-		.max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 2,
-		.platform_data = NULL,
-		.controller_data = &ad5304_chip_info,
-		.mode = SPI_MODE_2,
-	},
-#endif
 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 	{
 		.modalias = "spidev",
@@ -457,6 +439,19 @@ static struct platform_device bfin_device_gpiokeys = {
 };
 #endif
 
+static struct resource bfin_gpios_resources = {
+	.start = 0,
+	.end   = MAX_BLACKFIN_GPIOS - 1,
+	.flags = IORESOURCE_IRQ,
+};
+
+static struct platform_device bfin_gpios_device = {
+	.name = "simple-gpio",
+	.id = -1,
+	.num_resources = 1,
+	.resource = &bfin_gpios_resources,
+};
+
 #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
 #include <linux/i2c-gpio.h>
 
@@ -518,6 +513,8 @@ static struct platform_device *stamp_devices[] __initdata = {
 #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
 	&i2c_gpio_device,
 #endif
+
+	&bfin_gpios_device,
 	&stamp_flash_device,
 };
 

arch/blackfin/mach-bf537/boards/generic_board.c

@@ -371,13 +371,6 @@ static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE)
-static struct bfin5xx_spi_chip ad5304_chip_info = {
-	.enable_dma = 0,
-	.bits_per_word = 16,
-};
-#endif
-
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
 	.enable_dma = 0,
@@ -483,17 +476,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_3,
 	},
 #endif
-#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE)
-	{
-		.modalias = "ad5304_spi",
-		.max_speed_hz = 1250000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 2,
-		.platform_data = NULL,
-		.controller_data = &ad5304_chip_info,
-		.mode = SPI_MODE_2,
-	},
-#endif
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 	{
 		.modalias		= "ad7877",

arch/blackfin/mach-bf537/boards/stamp.c

@@ -128,6 +128,19 @@ static struct platform_device bfin_device_gpiokeys = {
 };
 #endif
 
+static struct resource bfin_gpios_resources = {
+	.start = 0,
+	.end   = MAX_BLACKFIN_GPIOS - 1,
+	.flags = IORESOURCE_IRQ,
+};
+
+static struct platform_device bfin_gpios_device = {
+	.name = "simple-gpio",
+	.id = -1,
+	.num_resources = 1,
+	.resource = &bfin_gpios_resources,
+};
+
 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
 static struct resource bfin_pcmcia_cf_resources[] = {
 	{
@@ -343,7 +356,7 @@ static struct platform_device net2272_bfin_device = {
 static struct mtd_partition stamp_partitions[] = {
 	{
 		.name       = "Bootloader",
-		.size       = 0x20000,
+		.size       = 0x40000,
 		.offset     = 0,
 	}, {
 		.name       = "Kernel",
@@ -351,7 +364,7 @@ static struct mtd_partition stamp_partitions[] = {
 		.offset     = MTDPART_OFS_APPEND,
 	}, {
 		.name       = "RootFS",
-		.size       = 0x400000 - 0x20000 - 0xE0000 - 0x10000,
+		.size       = 0x400000 - 0x40000 - 0xE0000 - 0x10000,
 		.offset     = MTDPART_OFS_APPEND,
 	}, {
 		.name       = "MAC Address",
@@ -391,17 +404,17 @@ static struct platform_device stamp_flash_device = {
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
 		.name = "bootloader",
-		.size = 0x00020000,
+		.size = 0x00040000,
 		.offset = 0,
 		.mask_flags = MTD_CAP_ROM
 	}, {
 		.name = "kernel",
 		.size = 0xe0000,
-		.offset = 0x20000
+		.offset = MTDPART_OFS_APPEND,
 	}, {
 		.name = "file system",
-		.size = 0x700000,
-		.offset = 0x00100000,
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
 	}
 };
 
@@ -459,13 +472,6 @@ static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE)
-static struct bfin5xx_spi_chip ad5304_chip_info = {
-	.enable_dma = 0,
-	.bits_per_word = 16,
-};
-#endif
-
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
 	.enable_dma = 0,
@@ -578,17 +584,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_3,
 	},
 #endif
-#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE)
-	{
-		.modalias = "ad5304_spi",
-		.max_speed_hz = 1250000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 2,
-		.platform_data = NULL,
-		.controller_data = &ad5304_chip_info,
-		.mode = SPI_MODE_2,
-	},
-#endif
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 	{
 		.modalias		= "ad7877",
@@ -821,6 +816,8 @@ static struct platform_device *stamp_devices[] __initdata = {
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 	&bfin_device_gpiokeys,
 #endif
+
+	&bfin_gpios_device,
 	&stamp_flash_device,
 };
 

arch/blackfin/mach-bf548/boards/ezkit.c

@@ -285,8 +285,8 @@ static struct mtd_partition partition_info[] = {
 	},
 	{
 		.name = "File System",
-		.offset = 4 * SIZE_1M,
-		.size = (256 - 4) * SIZE_1M,
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
 	},
 };
 
@@ -323,7 +323,7 @@ static struct platform_device bf5xx_nand_device = {
 };
 #endif
 
-#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN)
+#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
 static struct platform_device bf54x_sdh_device = {
 	.name = "bfin-sdh",
 	.id = 0,
@@ -333,7 +333,7 @@ static struct platform_device bf54x_sdh_device = {
 static struct mtd_partition ezkit_partitions[] = {
 	{
 		.name       = "Bootloader",
-		.size       = 0x20000,
+		.size       = 0x40000,
 		.offset     = 0,
 	}, {
 		.name       = "Kernel",
@@ -381,8 +381,8 @@ static struct mtd_partition bfin_spi_flash_partitions[] = {
 		.mask_flags = MTD_CAP_ROM
 	}, {
 		.name = "linux kernel",
-		.size = 0x1c0000,
-		.offset = 0x40000
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
 	}
 };
 
@@ -594,6 +594,19 @@ static struct platform_device bfin_device_gpiokeys = {
 };
 #endif
 
+static struct resource bfin_gpios_resources = {
+	.start = 0,
+	.end   = MAX_BLACKFIN_GPIOS - 1,
+	.flags = IORESOURCE_IRQ,
+};
+
+static struct platform_device bfin_gpios_device = {
+	.name = "simple-gpio",
+	.id = -1,
+	.num_resources = 1,
+	.resource = &bfin_gpios_resources,
+};
+
 static struct platform_device *ezkit_devices[] __initdata = {
 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
 	&rtc_device,
@@ -623,7 +636,7 @@ static struct platform_device *ezkit_devices[] __initdata = {
 	&bf5xx_nand_device,
 #endif
 
-#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN)
+#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
 	&bf54x_sdh_device,
 #endif
 
@@ -646,6 +659,8 @@ static struct platform_device *ezkit_devices[] __initdata = {
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 	&bfin_device_gpiokeys,
 #endif
+
+	&bfin_gpios_device,
 	&ezkit_flash_device,
 };
 

arch/blackfin/mach-bf548/dma.c

@@ -27,6 +27,8 @@
  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
+#include <linux/module.h>
+
 #include <asm/blackfin.h>
 #include <asm/dma.h>
 

arch/blackfin/mach-bf548/head.S

@@ -28,6 +28,7 @@
  */
 
 #include <linux/linkage.h>
+#include <linux/init.h>
 #include <asm/blackfin.h>
 #include <asm/trace.h>
 #if CONFIG_BFIN_KERNEL_CLOCK
@@ -44,10 +45,9 @@
 
 #define INITIAL_STACK   0xFFB01000
 
-.text
+__INIT
 
 ENTRY(__start)
-ENTRY(__stext)
 	/* R0: argument of command line string, passed from uboot, save it */
 	R7 = R0;
 	/* Enable Cycle Counter and Nesting Of Interrupts */
@@ -213,6 +213,7 @@ ENTRY(__stext)
 
 .LWAIT_HERE:
 	jump .LWAIT_HERE;
+ENDPROC(__start)
 
 ENTRY(_real_start)
 	[ -- sp ] = reti;
@@ -285,6 +286,9 @@ ENTRY(_real_start)
 	call _start_kernel;
 .L_exit:
 	jump.s	.L_exit;
+ENDPROC(_real_start)
+
+__FINIT
 
 .section .l1.text
 #if CONFIG_BFIN_KERNEL_CLOCK
@@ -450,6 +454,7 @@ ENTRY(_start_dma_code)
 	SSYNC;
 
 	RTS;
+ENDPROC(_start_dma_code)
 #endif /* CONFIG_BFIN_KERNEL_CLOCK */
 
 .data

arch/blackfin/mach-bf561/boards/ezkit.c

@@ -223,7 +223,7 @@ static struct platform_device bfin_uart_device = {
 static struct mtd_partition ezkit_partitions[] = {
 	{
 		.name       = "Bootloader",
-		.size       = 0x20000,
+		.size       = 0x40000,
 		.offset     = 0,
 	}, {
 		.name       = "Kernel",
@@ -389,6 +389,19 @@ static struct platform_device bfin_device_gpiokeys = {
 };
 #endif
 
+static struct resource bfin_gpios_resources = {
+	.start = 0,
+	.end   = MAX_BLACKFIN_GPIOS - 1,
+	.flags = IORESOURCE_IRQ,
+};
+
+static struct platform_device bfin_gpios_device = {
+	.name = "simple-gpio",
+	.id = -1,
+	.num_resources = 1,
+	.resource = &bfin_gpios_resources,
+};
+
 #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
 #include <linux/i2c-gpio.h>
 
@@ -446,6 +459,7 @@ static struct platform_device *ezkit_devices[] __initdata = {
 	&isp1362_hcd_device,
 #endif
 
+	&bfin_gpios_device,
 	&ezkit_flash_device,
 };
 

arch/blackfin/mach-common/dpmc.S

@@ -31,140 +31,6 @@
 #include <asm/blackfin.h>
 #include <asm/mach/irq.h>
 
-.text
-
-ENTRY(_unmask_wdog_wakeup_evt)
-	[--SP] = ( R7:0, P5:0 );
-#if defined(CONFIG_BF561)
-	P0.H = hi(SICA_IWR1);
-	P0.L = lo(SICA_IWR1);
-#elif defined(CONFIG_BF54x) || defined(CONFIG_BF52x)
-	P0.h = HI(SIC_IWR0);
-	P0.l = LO(SIC_IWR0);
-#else
-	P0.h = HI(SIC_IWR);
-	P0.l = LO(SIC_IWR);
-#endif
-	R7 = [P0];
-#if defined(CONFIG_BF561)
-	BITSET(R7, 27);
-#else
-	BITSET(R7,(IRQ_WATCH - IVG7));
-#endif
-	[P0] = R7;
-	SSYNC;
-
-	( R7:0, P5:0 ) = [SP++];
-	RTS;
-
-.LWRITE_TO_STAT:
-	/* When watch dog timer is enabled, a write to STAT will load the
-	 * contents of CNT to STAT
-	 */
-	R7 = 0x0000(z);
-#if defined(CONFIG_BF561)
-	P0.h = HI(WDOGA_STAT);
-	P0.l = LO(WDOGA_STAT);
-#else
-	P0.h = HI(WDOG_STAT);
-	P0.l = LO(WDOG_STAT);
-#endif
-	[P0] = R7;
-	SSYNC;
-	JUMP .LSKIP_WRITE_TO_STAT;
-
-ENTRY(_program_wdog_timer)
-	[--SP] = ( R7:0, P5:0 );
-#if defined(CONFIG_BF561)
-	P0.h = HI(WDOGA_CNT);
-	P0.l = LO(WDOGA_CNT);
-#else
-	P0.h = HI(WDOG_CNT);
-	P0.l = LO(WDOG_CNT);
-#endif
-	[P0] = R0;
-	SSYNC;
-
-#if defined(CONFIG_BF561)
-	P0.h = HI(WDOGA_CTL);
-	P0.l = LO(WDOGA_CTL);
-#else
-	P0.h = HI(WDOG_CTL);
-	P0.l = LO(WDOG_CTL);
-#endif
-	R7 = W[P0](Z);
-	CC = BITTST(R7,1);
-	if !CC JUMP .LWRITE_TO_STAT;
-	CC = BITTST(R7,2);
-	if !CC JUMP .LWRITE_TO_STAT;
-
-.LSKIP_WRITE_TO_STAT:
-#if defined(CONFIG_BF561)
-	P0.h = HI(WDOGA_CTL);
-	P0.l = LO(WDOGA_CTL);
-#else
-	P0.h = HI(WDOG_CTL);
-	P0.l = LO(WDOG_CTL);
-#endif
-	R7 = W[P0](Z);
-	BITCLR(R7,1);   /* Enable GP event */
-	BITSET(R7,2);
-	W[P0] = R7.L;
-	SSYNC;
-	NOP;
-
-	R7 = W[P0](Z);
-	BITCLR(R7,4);   /* Enable the wdog counter */
-	W[P0] = R7.L;
-	SSYNC;
-
-	( R7:0, P5:0 ) = [SP++];
-	RTS;
-
-ENTRY(_clear_wdog_wakeup_evt)
-	[--SP] = ( R7:0, P5:0 );
-
-#if defined(CONFIG_BF561)
-	P0.h = HI(WDOGA_CTL);
-	P0.l = LO(WDOGA_CTL);
-#else
-	P0.h = HI(WDOG_CTL);
-	P0.l = LO(WDOG_CTL);
-#endif
-	R7 = 0x0AD6(Z);
-	W[P0] = R7.L;
-	SSYNC;
-
-	R7 = W[P0](Z);
-	BITSET(R7,15);
-	W[P0] = R7.L;
-	SSYNC;
-
-	R7 = W[P0](Z);
-	BITSET(R7,1);
-	BITSET(R7,2);
-	W[P0] = R7.L;
-	SSYNC;
-
-	( R7:0, P5:0 ) = [SP++];
-	RTS;
-
-ENTRY(_disable_wdog_timer)
-	[--SP] = ( R7:0, P5:0 );
-#if defined(CONFIG_BF561)
-	P0.h = HI(WDOGA_CTL);
-	P0.l = LO(WDOGA_CTL);
-#else
-	P0.h = HI(WDOG_CTL);
-	P0.l = LO(WDOG_CTL);
-#endif
-	R7 = 0xAD6(Z);
-	W[P0] = R7.L;
-	SSYNC;
-	( R7:0, P5:0 ) = [SP++];
-	RTS;
-
-#if !defined(CONFIG_BF561)
 
 .section .l1.text
 
@@ -459,10 +325,12 @@ ENTRY(_set_sic_iwr)
 	RTS;
 
 ENTRY(_set_rtc_istat)
+#ifndef CONFIG_BF561
 	P0.H = hi(RTC_ISTAT);
 	P0.L = lo(RTC_ISTAT);
 	w[P0] = R0.L;
 	SSYNC;
+#endif
 	RTS;
 
 ENTRY(_test_pll_locked)
@@ -473,4 +341,3 @@ ENTRY(_test_pll_locked)
 	CC = BITTST(R0,5);
 	IF !CC JUMP 1b;
 	RTS;
-#endif

arch/blackfin/mach-common/entry.S

@@ -1369,7 +1369,7 @@ ENTRY(_sys_call_table)
 	.long _sys_epoll_pwait
 	.long _sys_utimensat
 	.long _sys_signalfd
-	.long _sys_ni_syscall
+	.long _sys_timerfd_create
 	.long _sys_eventfd	/* 350 */
 	.long _sys_pread64
 	.long _sys_pwrite64
@@ -1378,6 +1378,9 @@ ENTRY(_sys_call_table)
 	.long _sys_get_robust_list	/* 355 */
 	.long _sys_fallocate
 	.long _sys_semtimedop
+	.long _sys_timerfd_settime
+	.long _sys_timerfd_gettime
+
 	.rept NR_syscalls-(.-_sys_call_table)/4
 	.long _sys_ni_syscall
 	.endr

arch/blackfin/mach-common/ints-priority.c

@@ -74,7 +74,7 @@ unsigned long bfin_sic_iwr[3];	/* Up to 3 SIC_IWRx registers */
 #endif
 
 struct ivgx {
-	/* irq number for request_irq, available in mach-bf533/irq.h */
+	/* irq number for request_irq, available in mach-bf5xx/irq.h */
 	unsigned int irqno;
 	/* corresponding bit in the SIC_ISR register */
 	unsigned int isrflag;
@@ -86,7 +86,6 @@ struct ivg_slice {
 	struct ivgx *istop;
 } ivg7_13[IVG13 - IVG7 + 1];
 
-static void search_IAR(void);
 
 /*
  * Search SIC_IAR and fill tables with the irqvalues
@@ -120,10 +119,10 @@ static void __init search_IAR(void)
 }
 
 /*
- * This is for BF533 internal IRQs
+ * This is for core internal IRQs
  */
 
-static void ack_noop(unsigned int irq)
+static void bfin_ack_noop(unsigned int irq)
 {
 	/* Dummy function.  */
 }
@@ -156,11 +155,11 @@ static void bfin_internal_mask_irq(unsigned int irq)
 {
 #ifdef CONFIG_BF53x
 	bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() &
-			     ~(1 << (irq - (IRQ_CORETMR + 1))));
+			     ~(1 << SIC_SYSIRQ(irq)));
 #else
 	unsigned mask_bank, mask_bit;
-	mask_bank = (irq - (IRQ_CORETMR + 1)) / 32;
-	mask_bit = (irq - (IRQ_CORETMR + 1)) % 32;
+	mask_bank = SIC_SYSIRQ(irq) / 32;
+	mask_bit = SIC_SYSIRQ(irq) % 32;
 	bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) &
 			     ~(1 << mask_bit));
 #endif
@@ -171,11 +170,11 @@ static void bfin_internal_unmask_irq(unsigned int irq)
 {
 #ifdef CONFIG_BF53x
 	bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() |
-			     (1 << (irq - (IRQ_CORETMR + 1))));
+			     (1 << SIC_SYSIRQ(irq)));
 #else
 	unsigned mask_bank, mask_bit;
-	mask_bank = (irq - (IRQ_CORETMR + 1)) / 32;
-	mask_bit = (irq - (IRQ_CORETMR + 1)) % 32;
+	mask_bank = SIC_SYSIRQ(irq) / 32;
+	mask_bit = SIC_SYSIRQ(irq) % 32;
 	bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) |
 			     (1 << mask_bit));
 #endif
@@ -187,8 +186,8 @@ int bfin_internal_set_wake(unsigned int irq, unsigned int state)
 {
 	unsigned bank, bit;
 	unsigned long flags;
-	bank = (irq - (IRQ_CORETMR + 1)) / 32;
-	bit = (irq - (IRQ_CORETMR + 1)) % 32;
+	bank = SIC_SYSIRQ(irq) / 32;
+	bit = SIC_SYSIRQ(irq) % 32;
 
 	local_irq_save(flags);
 
@@ -204,15 +203,18 @@ int bfin_internal_set_wake(unsigned int irq, unsigned int state)
 #endif
 
 static struct irq_chip bfin_core_irqchip = {
-	.ack = ack_noop,
+	.ack = bfin_ack_noop,
 	.mask = bfin_core_mask_irq,
 	.unmask = bfin_core_unmask_irq,
 };
 
 static struct irq_chip bfin_internal_irqchip = {
-	.ack = ack_noop,
+	.ack = bfin_ack_noop,
 	.mask = bfin_internal_mask_irq,
 	.unmask = bfin_internal_unmask_irq,
+	.mask_ack = bfin_internal_mask_irq,
+	.disable = bfin_internal_mask_irq,
+	.enable = bfin_internal_unmask_irq,
 #ifdef CONFIG_PM
 	.set_wake = bfin_internal_set_wake,
 #endif
@@ -221,38 +223,23 @@ static struct irq_chip bfin_internal_irqchip = {
 #ifdef BF537_GENERIC_ERROR_INT_DEMUX
 static int error_int_mask;
 
-static void bfin_generic_error_ack_irq(unsigned int irq)
-{
-
-}
-
 static void bfin_generic_error_mask_irq(unsigned int irq)
 {
 	error_int_mask &= ~(1L << (irq - IRQ_PPI_ERROR));
 
-	if (!error_int_mask) {
-		local_irq_disable();
-		bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() &
-				     ~(1 << (IRQ_GENERIC_ERROR -
-					(IRQ_CORETMR + 1))));
-		SSYNC();
-		local_irq_enable();
-	}
+	if (!error_int_mask)
+		bfin_internal_mask_irq(IRQ_GENERIC_ERROR);
 }
 
 static void bfin_generic_error_unmask_irq(unsigned int irq)
 {
-	local_irq_disable();
-	bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() | 1 <<
-			     (IRQ_GENERIC_ERROR - (IRQ_CORETMR + 1)));
-	SSYNC();
-	local_irq_enable();
-
+	bfin_internal_unmask_irq(IRQ_GENERIC_ERROR);
 	error_int_mask |= 1L << (irq - IRQ_PPI_ERROR);
 }
 
 static struct irq_chip bfin_generic_error_irqchip = {
-	.ack = bfin_generic_error_ack_irq,
+	.ack = bfin_ack_noop,
+	.mask_ack = bfin_generic_error_mask_irq,
 	.mask = bfin_generic_error_mask_irq,
 	.unmask = bfin_generic_error_unmask_irq,
 };
@@ -608,7 +595,7 @@ static struct pin_int_t *pint[NR_PINT_SYS_IRQS] = {
 	(struct pin_int_t *)PINT3_MASK_SET,
 };
 
-unsigned short get_irq_base(u8 bank, u8 bmap)
+inline unsigned short get_irq_base(u8 bank, u8 bmap)
 {
 
 	u16 irq_base;
@@ -969,17 +956,12 @@ int __init init_arch_irq(void)
 #if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561)
 	bfin_write_SIC_IMASK0(SIC_UNMASK_ALL);
 	bfin_write_SIC_IMASK1(SIC_UNMASK_ALL);
-	bfin_write_SIC_IWR0(IWR_ENABLE_ALL);
-	bfin_write_SIC_IWR1(IWR_ENABLE_ALL);
 # ifdef CONFIG_BF54x
 	bfin_write_SIC_IMASK2(SIC_UNMASK_ALL);
-	bfin_write_SIC_IWR2(IWR_ENABLE_ALL);
 # endif
 #else
 	bfin_write_SIC_IMASK(SIC_UNMASK_ALL);
-	bfin_write_SIC_IWR(IWR_ENABLE_ALL);
 #endif
-	SSYNC();
 
 	local_irq_disable();
 
@@ -1001,90 +983,53 @@ int __init init_arch_irq(void)
 			set_irq_chip(irq, &bfin_core_irqchip);
 		else
 			set_irq_chip(irq, &bfin_internal_irqchip);
-#ifdef BF537_GENERIC_ERROR_INT_DEMUX
-		if (irq != IRQ_GENERIC_ERROR) {
-#endif
 
-			switch (irq) {
+		switch (irq) {
 #if defined(CONFIG_BF53x)
-			case IRQ_PROG_INTA:
-				set_irq_chained_handler(irq,
-							bfin_demux_gpio_irq);
-				break;
+		case IRQ_PROG_INTA:
 # if defined(BF537_FAMILY) && !(defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE))
-			case IRQ_MAC_RX:
-				set_irq_chained_handler(irq,
-							bfin_demux_gpio_irq);
-				break;
+		case IRQ_MAC_RX:
 # endif
 #elif defined(CONFIG_BF54x)
-			case IRQ_PINT0:
-				set_irq_chained_handler(irq,
-							bfin_demux_gpio_irq);
-				break;
-			case IRQ_PINT1:
-				set_irq_chained_handler(irq,
-							bfin_demux_gpio_irq);
-				break;
-			case IRQ_PINT2:
-				set_irq_chained_handler(irq,
-							bfin_demux_gpio_irq);
-				break;
-			case IRQ_PINT3:
-				set_irq_chained_handler(irq,
-							bfin_demux_gpio_irq);
-				break;
+		case IRQ_PINT0:
+		case IRQ_PINT1:
+		case IRQ_PINT2:
+		case IRQ_PINT3:
 #elif defined(CONFIG_BF52x)
-			case IRQ_PORTF_INTA:
-				set_irq_chained_handler(irq,
-							bfin_demux_gpio_irq);
-				break;
-			case IRQ_PORTG_INTA:
-				set_irq_chained_handler(irq,
-							bfin_demux_gpio_irq);
-				break;
-			case IRQ_PORTH_INTA:
-				set_irq_chained_handler(irq,
-							bfin_demux_gpio_irq);
-				break;
+		case IRQ_PORTF_INTA:
+		case IRQ_PORTG_INTA:
+		case IRQ_PORTH_INTA:
 #elif defined(CONFIG_BF561)
-			case IRQ_PROG0_INTA:
-				set_irq_chained_handler(irq,
-							bfin_demux_gpio_irq);
-				break;
-			case IRQ_PROG1_INTA:
-				set_irq_chained_handler(irq,
-							bfin_demux_gpio_irq);
-				break;
-			case IRQ_PROG2_INTA:
-				set_irq_chained_handler(irq,
-							bfin_demux_gpio_irq);
-				break;
+		case IRQ_PROG0_INTA:
+		case IRQ_PROG1_INTA:
+		case IRQ_PROG2_INTA:
 #endif
-			default:
-				set_irq_handler(irq, handle_simple_irq);
-				break;
-			}
-
+			set_irq_chained_handler(irq,
+						bfin_demux_gpio_irq);
+			break;
 #ifdef BF537_GENERIC_ERROR_INT_DEMUX
-		} else {
+		case IRQ_GENERIC_ERROR:
 			set_irq_handler(irq, bfin_demux_error_irq);
-		}
+
+			break;
 #endif
+		default:
+			set_irq_handler(irq, handle_simple_irq);
+			break;
+		}
 	}
+
 #ifdef BF537_GENERIC_ERROR_INT_DEMUX
-	for (irq = IRQ_PPI_ERROR; irq <= IRQ_UART1_ERROR; irq++) {
-		set_irq_chip(irq, &bfin_generic_error_irqchip);
-		set_irq_handler(irq, handle_level_irq);
-	}
+	for (irq = IRQ_PPI_ERROR; irq <= IRQ_UART1_ERROR; irq++)
+		set_irq_chip_and_handler(irq, &bfin_generic_error_irqchip,
+					 handle_level_irq);
 #endif
 
-	for (irq = GPIO_IRQ_BASE; irq < NR_IRQS; irq++) {
+	/* if configured as edge, then will be changed to do_edge_IRQ */
+	for (irq = GPIO_IRQ_BASE; irq < NR_IRQS; irq++)
+		set_irq_chip_and_handler(irq, &bfin_gpio_irqchip,
+					 handle_level_irq);
 
-		set_irq_chip(irq, &bfin_gpio_irqchip);
-		/* if configured as edge, then will be changed to do_edge_IRQ */
-		set_irq_handler(irq, handle_level_irq);
-	}
 
 	bfin_write_IMASK(0);
 	CSYNC();
@@ -1106,6 +1051,16 @@ int __init init_arch_irq(void)
 	    IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 |
 	    IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW;
 
+#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561)
+	bfin_write_SIC_IWR0(IWR_ENABLE_ALL);
+	bfin_write_SIC_IWR1(IWR_ENABLE_ALL);
+# ifdef CONFIG_BF54x
+	bfin_write_SIC_IWR2(IWR_ENABLE_ALL);
+# endif
+#else
+	bfin_write_SIC_IWR(IWR_ENABLE_ALL);
+#endif
+
 	return 0;
 }
 
@@ -1122,7 +1077,6 @@ void do_irq(int vec, struct pt_regs *fp)
 #if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561)
 		unsigned long sic_status[3];
 
-		SSYNC();
 		sic_status[0] = bfin_read_SIC_ISR0() & bfin_read_SIC_IMASK0();
 		sic_status[1] = bfin_read_SIC_ISR1() & bfin_read_SIC_IMASK1();
 #ifdef CONFIG_BF54x
@@ -1138,7 +1092,7 @@ void do_irq(int vec, struct pt_regs *fp)
 		}
 #else
 		unsigned long sic_status;
-		SSYNC();
+
 		sic_status = bfin_read_SIC_IMASK() & bfin_read_SIC_ISR();
 
 		for (;; ivg++) {

arch/blackfin/mm/init.c

@@ -181,7 +181,7 @@ void __init mem_init(void)
 	}
 }
 
-static __init void free_init_pages(const char *what, unsigned long begin, unsigned long end)
+static void __init free_init_pages(const char *what, unsigned long begin, unsigned long end)
 {
 	unsigned long addr;
 	/* next to check that the page we free is not a partial page */
@@ -203,7 +203,7 @@ void __init free_initrd_mem(unsigned long start, unsigned long end)
 }
 #endif
 
-void __init free_initmem(void)
+void __init_refok free_initmem(void)
 {
 #if defined CONFIG_RAMKERNEL && !defined CONFIG_MPU
 	free_init_pages("unused kernel memory",

arch/cris/arch-v10/kernel/time.c

@@ -13,7 +13,7 @@
 #include <linux/swap.h>
 #include <linux/sched.h>
 #include <linux/init.h>
-#include <linux/vmstat.h>
+#include <linux/mm.h>
 #include <asm/arch/svinto.h>
 #include <asm/types.h>
 #include <asm/signal.h>

arch/cris/arch-v10/lib/string.c

@@ -1,55 +1,59 @@
-/*#************************************************************************#*/
-/*#-------------------------------------------------------------------------*/
-/*#                                                                         */
-/*# FUNCTION NAME: memcpy()                                                 */
-/*#                                                                         */
-/*# PARAMETERS:  void* dst;   Destination address.                          */
-/*#              void* src;   Source address.                               */
-/*#              int   len;   Number of bytes to copy.                      */
-/*#                                                                         */
-/*# RETURNS:     dst.                                                       */
-/*#                                                                         */
-/*# DESCRIPTION: Copies len bytes of memory from src to dst.  No guarantees */
-/*#              about copying of overlapping memory areas. This routine is */
-/*#              very sensitive to compiler changes in register allocation. */
-/*#              Should really be rewritten to avoid this problem.          */
-/*#                                                                         */
-/*#-------------------------------------------------------------------------*/
-/*#                                                                         */
-/*# HISTORY                                                                 */
-/*#                                                                         */
-/*# DATE      NAME            CHANGES                                       */
-/*# ----      ----            -------                                       */
-/*# 941007    Kenny R         Creation                                      */
-/*# 941011    Kenny R         Lots of optimizations and inlining.           */
-/*# 941129    Ulf A           Adapted for use in libc.                      */
-/*# 950216    HP              N==0 forgotten if non-aligned src/dst.        */
-/*#                           Added some optimizations.                     */
-/*# 001025    HP              Make src and dst char *.  Align dst to	    */
-/*#			      dword, not just word-if-both-src-and-dst-	    */
-/*#			      are-misaligned.				    */
-/*#                                                                         */
-/*#-------------------------------------------------------------------------*/
-
-#include <linux/types.h>
-
-void *memcpy(void *pdst,
-             const void *psrc,
-             size_t pn)
+/* A memcpy for CRIS.
+   Copyright (C) 1994-2005 Axis Communications.
+   All rights reserved.
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   1. Redistributions of source code must retain the above copyright
+      notice, this list of conditions and the following disclaimer.
+
+   2. Neither the name of Axis Communications nor the names of its
+      contributors may be used to endorse or promote products derived
+      from this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY AXIS COMMUNICATIONS AND ITS CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL AXIS
+   COMMUNICATIONS OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
+   INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+   IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.  */
+
+/* FIXME: This file should really only be used for reference, as the
+   result is somewhat depending on gcc generating what we expect rather
+   than what we describe.  An assembly file should be used instead.  */
+
+#include <stddef.h>
+
+/* Break even between movem and move16 is really at 38.7 * 2, but
+   modulo 44, so up to the next multiple of 44, we use ordinary code.  */
+#define MEMCPY_BY_BLOCK_THRESHOLD (44 * 2)
+
+/* No name ambiguities in this file.  */
+__asm__ (".syntax no_register_prefix");
+
+void *
+memcpy(void *pdst, const void *psrc, size_t pn)
 {
-  /* Ok.  Now we want the parameters put in special registers.
+  /* Now we want the parameters put in special registers.
      Make sure the compiler is able to make something useful of this.
-      As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop).
+     As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop).
 
-     If gcc was alright, it really would need no temporaries, and no
-     stack space to save stuff on. */
+     If gcc was allright, it really would need no temporaries, and no
+     stack space to save stuff on.  */
 
   register void *return_dst __asm__ ("r10") = pdst;
-  register char *dst __asm__ ("r13") = pdst;
-  register const char *src __asm__ ("r11") = psrc;
+  register unsigned char *dst __asm__ ("r13") = pdst;
+  register unsigned const char *src __asm__ ("r11") = psrc;
   register int n __asm__ ("r12") = pn;
-  
- 
+
   /* When src is aligned but not dst, this makes a few extra needless
      cycles.  I believe it would take as many to check that the
      re-alignment was unnecessary.  */
@@ -59,167 +63,174 @@ void *memcpy(void *pdst,
       && n >= 3)
   {
     if ((unsigned long) dst & 1)
-    {
-      n--;
-      *(char*)dst = *(char*)src;
-      src++;
-      dst++;
-    }
+      {
+	n--;
+	*dst = *src;
+	src++;
+	dst++;
+      }
 
     if ((unsigned long) dst & 2)
-    {
-      n -= 2;
-      *(short*)dst = *(short*)src;
-      src += 2;
-      dst += 2;
-    }
+      {
+	n -= 2;
+	*(short *) dst = *(short *) src;
+	src += 2;
+	dst += 2;
+      }
   }
 
-  /* Decide which copying method to use. */
-  if (n >= 44*2)                /* Break even between movem and
-                                   move16 is at 38.7*2, but modulo 44. */
-  {
-    /* For large copies we use 'movem' */
-
-  /* It is not optimal to tell the compiler about clobbering any
-     registers; that will move the saving/restoring of those registers
-     to the function prologue/epilogue, and make non-movem sizes
-     suboptimal.
-
-      This method is not foolproof; it assumes that the "asm reg"
-     declarations at the beginning of the function really are used
-     here (beware: they may be moved to temporary registers).
-      This way, we do not have to save/move the registers around into
-     temporaries; we can safely use them straight away.
-
-      If you want to check that the allocation was right; then
-      check the equalities in the first comment.  It should say
-      "r13=r13, r11=r11, r12=r12" */
-    __asm__ volatile ("\n\
-	;; Check that the following is true (same register names on	\n\
-	;; both sides of equal sign, as in r8=r8):			\n\
-	;; %0=r13, %1=r11, %2=r12					\n\
-	;;								\n\
-	;; Save the registers we'll use in the movem process		\n\
-	;; on the stack.						\n\
-	subq	11*4,$sp						\n\
-	movem	$r10,[$sp]						\n\
+  /* Decide which copying method to use.  */
+  if (n >= MEMCPY_BY_BLOCK_THRESHOLD)
+    {
+      /* It is not optimal to tell the compiler about clobbering any
+	 registers; that will move the saving/restoring of those registers
+	 to the function prologue/epilogue, and make non-movem sizes
+	 suboptimal.  */
+      __asm__ volatile
+	("\
+	 ;; GCC does promise correct register allocations, but let's	\n\
+	 ;; make sure it keeps its promises.				\n\
+	 .ifnc %0-%1-%2,$r13-$r11-$r12					\n\
+	 .error \"GCC reg alloc bug: %0-%1-%4 != $r13-$r12-$r11\"	\n\
+	 .endif								\n\
+									\n\
+	 ;; Save the registers we'll use in the movem process		\n\
+	 ;; on the stack.						\n\
+	 subq	11*4,sp							\n\
+	 movem	r10,[sp]						\n\
 									\n\
-	;; Now we've got this:						\n\
-	;; r11 - src							\n\
-	;; r13 - dst							\n\
-	;; r12 - n							\n\
+	 ;; Now we've got this:						\n\
+	 ;; r11 - src							\n\
+	 ;; r13 - dst							\n\
+	 ;; r12 - n							\n\
 									\n\
-	;; Update n for the first loop					\n\
-	subq	44,$r12							\n\
+	 ;; Update n for the first loop.				\n\
+	 subq	 44,r12							\n\
 0:									\n\
-	movem	[$r11+],$r10						\n\
-	subq	44,$r12							\n\
-	bge	0b							\n\
-	movem	$r10,[$r13+]						\n\
+"
+#ifdef __arch_common_v10_v32
+	 /* Cater to branch offset difference between v32 and v10.  We
+	    assume the branch below has an 8-bit offset.  */
+"	 setf\n"
+#endif
+"	 movem	[r11+],r10						\n\
+	 subq	44,r12							\n\
+	 bge	 0b							\n\
+	 movem	r10,[r13+]						\n\
 									\n\
-	addq	44,$r12 ;; compensate for last loop underflowing n	\n\
+	 ;; Compensate for last loop underflowing n.			\n\
+	 addq	44,r12							\n\
 									\n\
-	;; Restore registers from stack					\n\
-	movem	[$sp+],$r10"
+	 ;; Restore registers from stack.				\n\
+	 movem [sp+],r10"
 
-     /* Outputs */ : "=r" (dst), "=r" (src), "=r" (n) 
-     /* Inputs */ : "0" (dst), "1" (src), "2" (n));
-    
-  }
+	 /* Outputs.  */
+	 : "=r" (dst), "=r" (src), "=r" (n)
 
-  /* Either we directly starts copying, using dword copying
-     in a loop, or we copy as much as possible with 'movem' 
-     and then the last block (<44 bytes) is copied here.
-     This will work since 'movem' will have updated src,dst,n. */
+	 /* Inputs.  */
+	 : "0" (dst), "1" (src), "2" (n));
+    }
 
-  while ( n >= 16 )
-  {
-    *((long*)dst)++ = *((long*)src)++;
-    *((long*)dst)++ = *((long*)src)++;
-    *((long*)dst)++ = *((long*)src)++;
-    *((long*)dst)++ = *((long*)src)++;
-    n -= 16;
-  }
+  while (n >= 16)
+    {
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+
+      n -= 16;
+    }
 
-  /* A switch() is definitely the fastest although it takes a LOT of code.
-   * Particularly if you inline code this.
-   */
   switch (n)
-  {
+    {
     case 0:
       break;
+
     case 1:
-      *(char*)dst = *(char*)src;
+      *dst = *src;
       break;
+
     case 2:
-      *(short*)dst = *(short*)src;
+      *(short *) dst = *(short *) src;
       break;
+
     case 3:
-      *((short*)dst)++ = *((short*)src)++;
-      *(char*)dst = *(char*)src;
+      *(short *) dst = *(short *) src; dst += 2; src += 2;
+      *dst = *src;
       break;
+
     case 4:
-      *((long*)dst)++ = *((long*)src)++;
+      *(long *) dst = *(long *) src;
       break;
+
     case 5:
-      *((long*)dst)++ = *((long*)src)++;
-      *(char*)dst = *(char*)src;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *dst = *src;
       break;
+
     case 6:
-      *((long*)dst)++ = *((long*)src)++;
-      *(short*)dst = *(short*)src;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(short *) dst = *(short *) src;
       break;
+
     case 7:
-      *((long*)dst)++ = *((long*)src)++;
-      *((short*)dst)++ = *((short*)src)++;
-      *(char*)dst = *(char*)src;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(short *) dst = *(short *) src; dst += 2; src += 2;
+      *dst = *src;
       break;
+
     case 8:
-      *((long*)dst)++ = *((long*)src)++;
-      *((long*)dst)++ = *((long*)src)++;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src;
       break;
+
     case 9:
-      *((long*)dst)++ = *((long*)src)++;
-      *((long*)dst)++ = *((long*)src)++;
-      *(char*)dst = *(char*)src;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *dst = *src;
       break;
+
     case 10:
-      *((long*)dst)++ = *((long*)src)++;
-      *((long*)dst)++ = *((long*)src)++;
-      *(short*)dst = *(short*)src;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(short *) dst = *(short *) src;
       break;
+
     case 11:
-      *((long*)dst)++ = *((long*)src)++;
-      *((long*)dst)++ = *((long*)src)++;
-      *((short*)dst)++ = *((short*)src)++;
-      *(char*)dst = *(char*)src;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(short *) dst = *(short *) src; dst += 2; src += 2;
+      *dst = *src;
       break;
+
     case 12:
-      *((long*)dst)++ = *((long*)src)++;
-      *((long*)dst)++ = *((long*)src)++;
-      *((long*)dst)++ = *((long*)src)++;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src;
       break;
+
     case 13:
-      *((long*)dst)++ = *((long*)src)++;
-      *((long*)dst)++ = *((long*)src)++;
-      *((long*)dst)++ = *((long*)src)++;
-      *(char*)dst = *(char*)src;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *dst = *src;
       break;
+
     case 14:
-      *((long*)dst)++ = *((long*)src)++;
-      *((long*)dst)++ = *((long*)src)++;
-      *((long*)dst)++ = *((long*)src)++;
-      *(short*)dst = *(short*)src;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(short *) dst = *(short *) src;
       break;
+
     case 15:
-      *((long*)dst)++ = *((long*)src)++;
-      *((long*)dst)++ = *((long*)src)++;
-      *((long*)dst)++ = *((long*)src)++;
-      *((short*)dst)++ = *((short*)src)++;
-      *(char*)dst = *(char*)src;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(short *) dst = *(short *) src; dst += 2; src += 2;
+      *dst = *src;
       break;
-  }
+    }
 
-  return return_dst; /* destination pointer. */
-} /* memcpy() */
+  return return_dst;
+}

arch/cris/arch-v10/lib/usercopy.c

@@ -193,7 +193,7 @@ __copy_user (void __user *pdst, const void *psrc, unsigned long pn)
    inaccessible.  */
 
 unsigned long
-__copy_user_zeroing (void __user *pdst, const void *psrc, unsigned long pn)
+__copy_user_zeroing(void *pdst, const void __user *psrc, unsigned long pn)
 {
   /* We want the parameters put in special registers.
      Make sure the compiler is able to make something useful of this.

arch/cris/arch-v32/lib/string.c

@@ -1,55 +1,59 @@
-/*#************************************************************************#*/
-/*#-------------------------------------------------------------------------*/
-/*#                                                                         */
-/*# FUNCTION NAME: memcpy()                                                 */
-/*#                                                                         */
-/*# PARAMETERS:  void* dst;   Destination address.                          */
-/*#              void* src;   Source address.                               */
-/*#              int   len;   Number of bytes to copy.                      */
-/*#                                                                         */
-/*# RETURNS:     dst.                                                       */
-/*#                                                                         */
-/*# DESCRIPTION: Copies len bytes of memory from src to dst.  No guarantees */
-/*#              about copying of overlapping memory areas. This routine is */
-/*#              very sensitive to compiler changes in register allocation. */
-/*#              Should really be rewritten to avoid this problem.          */
-/*#                                                                         */
-/*#-------------------------------------------------------------------------*/
-/*#                                                                         */
-/*# HISTORY                                                                 */
-/*#                                                                         */
-/*# DATE      NAME            CHANGES                                       */
-/*# ----      ----            -------                                       */
-/*# 941007    Kenny R         Creation                                      */
-/*# 941011    Kenny R         Lots of optimizations and inlining.           */
-/*# 941129    Ulf A           Adapted for use in libc.                      */
-/*# 950216    HP              N==0 forgotten if non-aligned src/dst.        */
-/*#                           Added some optimizations.                     */
-/*# 001025    HP              Make src and dst char *.  Align dst to	    */
-/*#			      dword, not just word-if-both-src-and-dst-	    */
-/*#			      are-misaligned.				    */
-/*#                                                                         */
-/*#-------------------------------------------------------------------------*/
-
-#include <linux/types.h>
-
-void *memcpy(void *pdst,
-             const void *psrc,
-             size_t pn)
+/* A memcpy for CRIS.
+   Copyright (C) 1994-2005 Axis Communications.
+   All rights reserved.
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   1. Redistributions of source code must retain the above copyright
+      notice, this list of conditions and the following disclaimer.
+
+   2. Neither the name of Axis Communications nor the names of its
+      contributors may be used to endorse or promote products derived
+      from this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY AXIS COMMUNICATIONS AND ITS CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL AXIS
+   COMMUNICATIONS OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
+   INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+   IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.  */
+
+/* FIXME: This file should really only be used for reference, as the
+   result is somewhat depending on gcc generating what we expect rather
+   than what we describe.  An assembly file should be used instead.  */
+
+#include <stddef.h>
+
+/* Break even between movem and move16 is really at 38.7 * 2, but
+   modulo 44, so up to the next multiple of 44, we use ordinary code.  */
+#define MEMCPY_BY_BLOCK_THRESHOLD (44 * 2)
+
+/* No name ambiguities in this file.  */
+__asm__ (".syntax no_register_prefix");
+
+void *
+memcpy(void *pdst, const void *psrc, size_t pn)
 {
-  /* Ok.  Now we want the parameters put in special registers.
+  /* Now we want the parameters put in special registers.
      Make sure the compiler is able to make something useful of this.
-      As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop).
+     As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop).
 
-     If gcc was alright, it really would need no temporaries, and no
-     stack space to save stuff on. */
+     If gcc was allright, it really would need no temporaries, and no
+     stack space to save stuff on.  */
 
   register void *return_dst __asm__ ("r10") = pdst;
-  register char *dst __asm__ ("r13") = pdst;
-  register const char *src __asm__ ("r11") = psrc;
+  register unsigned char *dst __asm__ ("r13") = pdst;
+  register unsigned const char *src __asm__ ("r11") = psrc;
   register int n __asm__ ("r12") = pn;
 
-
   /* When src is aligned but not dst, this makes a few extra needless
      cycles.  I believe it would take as many to check that the
      re-alignment was unnecessary.  */
@@ -59,161 +63,174 @@ void *memcpy(void *pdst,
       && n >= 3)
   {
     if ((unsigned long) dst & 1)
-    {
-      n--;
-      *(char*)dst = *(char*)src;
-      src++;
-      dst++;
-    }
+      {
+	n--;
+	*dst = *src;
+	src++;
+	dst++;
+      }
 
     if ((unsigned long) dst & 2)
-    {
-      n -= 2;
-      *(short*)dst = *(short*)src;
-      src += 2;
-      dst += 2;
-    }
+      {
+	n -= 2;
+	*(short *) dst = *(short *) src;
+	src += 2;
+	dst += 2;
+      }
   }
 
-  /* Decide which copying method to use.  Movem is dirt cheap, so the
-     overheap is low enough to always use the minimum block size as the
-     threshold.  */
-  if (n >= 44)
-  {
-    /* For large copies we use 'movem' */
-
-  /* It is not optimal to tell the compiler about clobbering any
-     registers; that will move the saving/restoring of those registers
-     to the function prologue/epilogue, and make non-movem sizes
-     suboptimal.  */
-    __asm__ volatile ("							\n\
-        ;; Check that the register asm declaration got right.		\n\
-        ;; The GCC manual explicitly says TRT will happen.		\n\
-	.ifnc %0-%1-%2,$r13-$r11-$r12					\n\
-	.err								\n\
-	.endif								\n\
-									\n\
-	;; Save the registers we'll use in the movem process		\n\
+  /* Decide which copying method to use.  */
+  if (n >= MEMCPY_BY_BLOCK_THRESHOLD)
+    {
+      /* It is not optimal to tell the compiler about clobbering any
+	 registers; that will move the saving/restoring of those registers
+	 to the function prologue/epilogue, and make non-movem sizes
+	 suboptimal.  */
+      __asm__ volatile
+	("\
+	 ;; GCC does promise correct register allocations, but let's	\n\
+	 ;; make sure it keeps its promises.				\n\
+	 .ifnc %0-%1-%2,$r13-$r11-$r12					\n\
+	 .error \"GCC reg alloc bug: %0-%1-%4 != $r13-$r12-$r11\"	\n\
+	 .endif								\n\
 									\n\
-	;; on the stack.						\n\
-	subq 	11*4,$sp						\n\
-	movem	$r10,[$sp]						\n\
+	 ;; Save the registers we'll use in the movem process		\n\
+	 ;; on the stack.						\n\
+	 subq	11*4,sp							\n\
+	 movem	r10,[sp]						\n\
 									\n\
-        ;; Now we've got this:						\n\
-	;; r11 - src							\n\
-	;; r13 - dst							\n\
-	;; r12 - n							\n\
+	 ;; Now we've got this:						\n\
+	 ;; r11 - src							\n\
+	 ;; r13 - dst							\n\
+	 ;; r12 - n							\n\
 									\n\
-        ;; Update n for the first loop					\n\
-        subq    44,$r12							\n\
+	 ;; Update n for the first loop.				\n\
+	 subq	 44,r12							\n\
 0:									\n\
-	movem	[$r11+],$r10						\n\
-        subq   44,$r12							\n\
-        bge     0b							\n\
-	movem	$r10,[$r13+]						\n\
+"
+#ifdef __arch_common_v10_v32
+	 /* Cater to branch offset difference between v32 and v10.  We
+	    assume the branch below has an 8-bit offset.  */
+"	 setf\n"
+#endif
+"	 movem	[r11+],r10						\n\
+	 subq	44,r12							\n\
+	 bge	 0b							\n\
+	 movem	r10,[r13+]						\n\
 									\n\
-        addq   44,$r12  ;; compensate for last loop underflowing n	\n\
+	 ;; Compensate for last loop underflowing n.			\n\
+	 addq	44,r12							\n\
 									\n\
-	;; Restore registers from stack					\n\
-        movem [$sp+],$r10"
+	 ;; Restore registers from stack.				\n\
+	 movem [sp+],r10"
 
-     /* Outputs */ : "=r" (dst), "=r" (src), "=r" (n)
-     /* Inputs */ : "0" (dst), "1" (src), "2" (n));
+	 /* Outputs.  */
+	 : "=r" (dst), "=r" (src), "=r" (n)
 
-  }
+	 /* Inputs.  */
+	 : "0" (dst), "1" (src), "2" (n));
+    }
 
-  /* Either we directly starts copying, using dword copying
-     in a loop, or we copy as much as possible with 'movem'
-     and then the last block (<44 bytes) is copied here.
-     This will work since 'movem' will have updated src,dst,n. */
+  while (n >= 16)
+    {
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
 
-  while ( n >= 16 )
-  {
-    *((long*)dst)++ = *((long*)src)++;
-    *((long*)dst)++ = *((long*)src)++;
-    *((long*)dst)++ = *((long*)src)++;
-    *((long*)dst)++ = *((long*)src)++;
-    n -= 16;
-  }
+      n -= 16;
+    }
 
-  /* A switch() is definitely the fastest although it takes a LOT of code.
-   * Particularly if you inline code this.
-   */
   switch (n)
-  {
+    {
     case 0:
       break;
+
     case 1:
-      *(char*)dst = *(char*)src;
+      *dst = *src;
       break;
+
     case 2:
-      *(short*)dst = *(short*)src;
+      *(short *) dst = *(short *) src;
       break;
+
     case 3:
-      *((short*)dst)++ = *((short*)src)++;
-      *(char*)dst = *(char*)src;
+      *(short *) dst = *(short *) src; dst += 2; src += 2;
+      *dst = *src;
       break;
+
     case 4:
-      *((long*)dst)++ = *((long*)src)++;
+      *(long *) dst = *(long *) src;
       break;
+
     case 5:
-      *((long*)dst)++ = *((long*)src)++;
-      *(char*)dst = *(char*)src;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *dst = *src;
       break;
+
     case 6:
-      *((long*)dst)++ = *((long*)src)++;
-      *(short*)dst = *(short*)src;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(short *) dst = *(short *) src;
       break;
+
     case 7:
-      *((long*)dst)++ = *((long*)src)++;
-      *((short*)dst)++ = *((short*)src)++;
-      *(char*)dst = *(char*)src;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(short *) dst = *(short *) src; dst += 2; src += 2;
+      *dst = *src;
       break;
+
     case 8:
-      *((long*)dst)++ = *((long*)src)++;
-      *((long*)dst)++ = *((long*)src)++;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src;
       break;
+
     case 9:
-      *((long*)dst)++ = *((long*)src)++;
-      *((long*)dst)++ = *((long*)src)++;
-      *(char*)dst = *(char*)src;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *dst = *src;
       break;
+
     case 10:
-      *((long*)dst)++ = *((long*)src)++;
-      *((long*)dst)++ = *((long*)src)++;
-      *(short*)dst = *(short*)src;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(short *) dst = *(short *) src;
       break;
+
     case 11:
-      *((long*)dst)++ = *((long*)src)++;
-      *((long*)dst)++ = *((long*)src)++;
-      *((short*)dst)++ = *((short*)src)++;
-      *(char*)dst = *(char*)src;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(short *) dst = *(short *) src; dst += 2; src += 2;
+      *dst = *src;
       break;
+
     case 12:
-      *((long*)dst)++ = *((long*)src)++;
-      *((long*)dst)++ = *((long*)src)++;
-      *((long*)dst)++ = *((long*)src)++;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src;
       break;
+
     case 13:
-      *((long*)dst)++ = *((long*)src)++;
-      *((long*)dst)++ = *((long*)src)++;
-      *((long*)dst)++ = *((long*)src)++;
-      *(char*)dst = *(char*)src;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *dst = *src;
       break;
+
     case 14:
-      *((long*)dst)++ = *((long*)src)++;
-      *((long*)dst)++ = *((long*)src)++;
-      *((long*)dst)++ = *((long*)src)++;
-      *(short*)dst = *(short*)src;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(short *) dst = *(short *) src;
       break;
+
     case 15:
-      *((long*)dst)++ = *((long*)src)++;
-      *((long*)dst)++ = *((long*)src)++;
-      *((long*)dst)++ = *((long*)src)++;
-      *((short*)dst)++ = *((short*)src)++;
-      *(char*)dst = *(char*)src;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(short *) dst = *(short *) src; dst += 2; src += 2;
+      *dst = *src;
       break;
-  }
+    }
 
-  return return_dst; /* destination pointer. */
-} /* memcpy() */
+  return return_dst;
+}

arch/cris/arch-v32/lib/usercopy.c

@@ -161,7 +161,7 @@ __copy_user (void __user *pdst, const void *psrc, unsigned long pn)
    inaccessible.  */
 
 unsigned long
-__copy_user_zeroing (void __user *pdst, const void *psrc, unsigned long pn)
+__copy_user_zeroing(void *pdst, const void __user *psrc, unsigned long pn)
 {
   /* We want the parameters put in special registers.
      Make sure the compiler is able to make something useful of this.

arch/ia64/Kconfig

@@ -18,6 +18,7 @@ config IA64
 	select HAVE_IDE
 	select HAVE_OPROFILE
 	select HAVE_KPROBES
+	select HAVE_KRETPROBES
 	default y
 	help
 	  The Itanium Processor Family is Intel's 64-bit successor to
@@ -155,6 +156,8 @@ config IA64_HP_ZX1_SWIOTLB
 
 config IA64_SGI_SN2
 	bool "SGI-SN2"
+	select NUMA
+	select ACPI_NUMA
 	help
 	  Selecting this option will optimize the kernel for use on sn2 based
 	  systems, but the resulting kernel binary will not run on other

arch/ia64/Makefile

@@ -11,6 +11,8 @@
 # Copyright (C) 1998-2004 by David Mosberger-Tang <davidm@hpl.hp.com>
 #
 
+KBUILD_DEFCONFIG := generic_defconfig
+
 NM := $(CROSS_COMPILE)nm -B
 READELF := $(CROSS_COMPILE)readelf
 

arch/ia64/hp/common/hwsw_iommu.c

@@ -71,7 +71,7 @@ hwsw_init (void)
 #ifdef CONFIG_IA64_GENERIC
 		/* Better to have normal DMA than panic */
 		printk(KERN_WARNING "%s: Failed to initialize software I/O TLB,"
-		       " reverting to hpzx1 platform vector\n", __FUNCTION__);
+		       " reverting to hpzx1 platform vector\n", __func__);
 		machvec_init("hpzx1");
 #else
 		panic("Unable to initialize software I/O TLB services");

arch/ia64/hp/common/sba_iommu.c

@@ -529,7 +529,7 @@ sba_search_bitmap(struct ioc *ioc, unsigned long bits_wanted, int use_hint)
 		base_mask = RESMAP_MASK(bits_wanted);
 		mask = base_mask << bitshiftcnt;
 
-		DBG_RES("%s() o %ld %p", __FUNCTION__, o, res_ptr);
+		DBG_RES("%s() o %ld %p", __func__, o, res_ptr);
 		for(; res_ptr < res_end ; res_ptr++)
 		{ 
 			DBG_RES("    %p %lx %lx\n", res_ptr, mask, *res_ptr);
@@ -679,7 +679,7 @@ sba_alloc_range(struct ioc *ioc, size_t size)
 #endif
 
 	DBG_RES("%s(%x) %d -> %lx hint %x/%x\n",
-		__FUNCTION__, size, pages_needed, pide,
+		__func__, size, pages_needed, pide,
 		(uint) ((unsigned long) ioc->res_hint - (unsigned long) ioc->res_map),
 		ioc->res_bitshift );
 
@@ -722,8 +722,8 @@ sba_free_range(struct ioc *ioc, dma_addr_t iova, size_t size)
 			m = RESMAP_MASK(bits_not_wanted) << (pide & (BITS_PER_LONG - 1));
 			bits_not_wanted = 0;
 
-			DBG_RES("%s( ,%x,%x) %x/%lx %x %p %lx\n", __FUNCTION__, (uint) iova, size,
-		        	bits_not_wanted, m, pide, res_ptr, *res_ptr);
+			DBG_RES("%s( ,%x,%x) %x/%lx %x %p %lx\n", __func__, (uint) iova, size,
+			        bits_not_wanted, m, pide, res_ptr, *res_ptr);
 
 			ASSERT(m != 0);
 			ASSERT(bits_not_wanted);
@@ -940,8 +940,7 @@ sba_map_single(struct device *dev, void *addr, size_t size, int dir)
 
 	iovp = (dma_addr_t) pide << iovp_shift;
 
-	DBG_RUN("%s() 0x%p -> 0x%lx\n",
-		__FUNCTION__, addr, (long) iovp | offset);
+	DBG_RUN("%s() 0x%p -> 0x%lx\n", __func__, addr, (long) iovp | offset);
 
 	pdir_start = &(ioc->pdir_base[pide]);
 
@@ -1029,8 +1028,7 @@ void sba_unmap_single(struct device *dev, dma_addr_t iova, size_t size, int dir)
 #endif
 	offset = iova & ~iovp_mask;
 
-	DBG_RUN("%s() iovp 0x%lx/%x\n",
-		__FUNCTION__, (long) iova, size);
+	DBG_RUN("%s() iovp 0x%lx/%x\n", __func__, (long) iova, size);
 
 	iova ^= offset;        /* clear offset bits */
 	size += offset;
@@ -1404,7 +1402,7 @@ int sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents, int di
 	struct scatterlist *sg;
 #endif
 
-	DBG_RUN_SG("%s() START %d entries\n", __FUNCTION__, nents);
+	DBG_RUN_SG("%s() START %d entries\n", __func__, nents);
 	ioc = GET_IOC(dev);
 	ASSERT(ioc);
 
@@ -1468,7 +1466,7 @@ int sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents, int di
 #endif
 
 	ASSERT(coalesced == filled);
-	DBG_RUN_SG("%s() DONE %d mappings\n", __FUNCTION__, filled);
+	DBG_RUN_SG("%s() DONE %d mappings\n", __func__, filled);
 
 	return filled;
 }
@@ -1491,7 +1489,7 @@ void sba_unmap_sg (struct device *dev, struct scatterlist *sglist, int nents, in
 #endif
 
 	DBG_RUN_SG("%s() START %d entries,  %p,%x\n",
-		__FUNCTION__, nents, sba_sg_address(sglist), sglist->length);
+		   __func__, nents, sba_sg_address(sglist), sglist->length);
 
 #ifdef ASSERT_PDIR_SANITY
 	ioc = GET_IOC(dev);
@@ -1509,7 +1507,7 @@ void sba_unmap_sg (struct device *dev, struct scatterlist *sglist, int nents, in
 		nents--;
 	}
 
-	DBG_RUN_SG("%s() DONE (nents %d)\n", __FUNCTION__,  nents);
+	DBG_RUN_SG("%s() DONE (nents %d)\n", __func__,  nents);
 
 #ifdef ASSERT_PDIR_SANITY
 	spin_lock_irqsave(&ioc->res_lock, flags);
@@ -1546,7 +1544,7 @@ ioc_iova_init(struct ioc *ioc)
 	ioc->iov_size = ~ioc->imask + 1;
 
 	DBG_INIT("%s() hpa %p IOV base 0x%lx mask 0x%lx (%dMB)\n",
-		__FUNCTION__, ioc->ioc_hpa, ioc->ibase, ioc->imask,
+		__func__, ioc->ioc_hpa, ioc->ibase, ioc->imask,
 		ioc->iov_size >> 20);
 
 	switch (iovp_size) {
@@ -1569,7 +1567,7 @@ ioc_iova_init(struct ioc *ioc)
 
 	memset(ioc->pdir_base, 0, ioc->pdir_size);
 
-	DBG_INIT("%s() IOV page size %ldK pdir %p size %x\n", __FUNCTION__,
+	DBG_INIT("%s() IOV page size %ldK pdir %p size %x\n", __func__,
 		iovp_size >> 10, ioc->pdir_base, ioc->pdir_size);
 
 	ASSERT(ALIGN((unsigned long) ioc->pdir_base, 4*1024) == (unsigned long) ioc->pdir_base);
@@ -1612,7 +1610,7 @@ ioc_iova_init(struct ioc *ioc)
 
 		prefetch_spill_page = virt_to_phys(addr);
 
-		DBG_INIT("%s() prefetch spill addr: 0x%lx\n", __FUNCTION__, prefetch_spill_page);
+		DBG_INIT("%s() prefetch spill addr: 0x%lx\n", __func__, prefetch_spill_page);
 	}
 	/*
   	** Set all the PDIR entries valid w/ the spill page as the target
@@ -1641,7 +1639,7 @@ ioc_resource_init(struct ioc *ioc)
 	/* resource map size dictated by pdir_size */
 	ioc->res_size = ioc->pdir_size / PDIR_ENTRY_SIZE; /* entries */
 	ioc->res_size >>= 3;  /* convert bit count to byte count */
-	DBG_INIT("%s() res_size 0x%x\n", __FUNCTION__, ioc->res_size);
+	DBG_INIT("%s() res_size 0x%x\n", __func__, ioc->res_size);
 
 	ioc->res_map = (char *) __get_free_pages(GFP_KERNEL,
 						 get_order(ioc->res_size));
@@ -1664,7 +1662,7 @@ ioc_resource_init(struct ioc *ioc)
 							      | prefetch_spill_page);
 #endif
 
-	DBG_INIT("%s() res_map %x %p\n", __FUNCTION__,
+	DBG_INIT("%s() res_map %x %p\n", __func__,
 		 ioc->res_size, (void *) ioc->res_map);
 }
 
@@ -1767,7 +1765,7 @@ ioc_init(u64 hpa, void *handle)
 	iovp_size = (1 << iovp_shift);
 	iovp_mask = ~(iovp_size - 1);
 
-	DBG_INIT("%s: PAGE_SIZE %ldK, iovp_size %ldK\n", __FUNCTION__,
+	DBG_INIT("%s: PAGE_SIZE %ldK, iovp_size %ldK\n", __func__,
 		PAGE_SIZE >> 10, iovp_size >> 10);
 
 	if (!ioc->name) {
@@ -2137,7 +2135,7 @@ sba_page_override(char *str)
 			break;
 		default:
 			printk("%s: unknown/unsupported iommu page size %ld\n",
-			       __FUNCTION__, page_size);
+			       __func__, page_size);
 	}
 
 	return 1;

arch/ia64/hp/sim/simeth.c

@@ -222,7 +222,7 @@ simeth_probe1(void)
 	}
 
 	if ((rc = assign_irq_vector(AUTO_ASSIGN)) < 0)
-		panic("%s: out of interrupt vectors!\n", __FUNCTION__);
+		panic("%s: out of interrupt vectors!\n", __func__);
 	dev->irq = rc;
 
 	/*

arch/ia64/hp/sim/simserial.c

@@ -1000,7 +1000,7 @@ simrs_init (void)
 		if (!state->irq) {
 			if ((rc = assign_irq_vector(AUTO_ASSIGN)) < 0)
 				panic("%s: out of interrupt vectors!\n",
-				      __FUNCTION__);
+				      __func__);
 			state->irq = rc;
 			ia64_ssc_connect_irq(KEYBOARD_INTR, state->irq);
 		}

arch/ia64/ia32/ia32_signal.c

@@ -766,8 +766,19 @@ get_sigframe (struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size)
 
 	/* This is the X/Open sanctioned signal stack switching.  */
 	if (ka->sa.sa_flags & SA_ONSTACK) {
-		if (!on_sig_stack(esp))
+		int onstack = sas_ss_flags(esp);
+
+		if (onstack == 0)
 			esp = current->sas_ss_sp + current->sas_ss_size;
+		else if (onstack == SS_ONSTACK) {
+			/*
+			 * If we are on the alternate signal stack and would
+			 * overflow it, don't. Return an always-bogus address
+			 * instead so we will die with SIGSEGV.
+			 */
+			if (!likely(on_sig_stack(esp - frame_size)))
+				return (void __user *) -1L;
+		}
 	}
 	/* Legacy stack switching not supported */
 

arch/ia64/ia32/sys_ia32.c

@@ -32,13 +32,8 @@
 #include <linux/shm.h>
 #include <linux/slab.h>
 #include <linux/uio.h>
-#include <linux/nfs_fs.h>
+#include <linux/socket.h>
 #include <linux/quota.h>
-#include <linux/sunrpc/svc.h>
-#include <linux/nfsd/nfsd.h>
-#include <linux/nfsd/cache.h>
-#include <linux/nfsd/xdr.h>
-#include <linux/nfsd/syscall.h>
 #include <linux/poll.h>
 #include <linux/eventpoll.h>
 #include <linux/personality.h>

arch/ia64/kernel/crash.c

@@ -155,7 +155,7 @@ kdump_init_notifier(struct notifier_block *self, unsigned long val, void *data)
 		if (val == DIE_INIT_MONARCH_LEAVE)
 			ia64_mca_printk(KERN_NOTICE
 					"%s: kdump not configured\n",
-					__FUNCTION__);
+					__func__);
 		return NOTIFY_DONE;
 	}
 

arch/ia64/kernel/efi.c

@@ -379,8 +379,8 @@ efi_get_pal_addr (void)
 		 * a dedicated ITR for the PAL code.
 		 */
 		if ((vaddr & mask) == (KERNEL_START & mask)) {
-			printk(KERN_INFO "%s: no need to install ITR for "
-			       "PAL code\n", __FUNCTION__);
+			printk(KERN_INFO "%s: no need to install ITR for PAL code\n",
+			       __func__);
 			continue;
 		}
 
@@ -399,7 +399,7 @@ efi_get_pal_addr (void)
 		return __va(md->phys_addr);
 	}
 	printk(KERN_WARNING "%s: no PAL-code memory-descriptor found\n",
-	       __FUNCTION__);
+	       __func__);
 	return NULL;
 }
 
@@ -543,12 +543,30 @@ efi_init (void)
 		for (i = 0, p = efi_map_start; p < efi_map_end;
 		     ++i, p += efi_desc_size)
 		{
+			const char *unit;
+			unsigned long size;
+
 			md = p;
-			printk("mem%02u: type=%u, attr=0x%lx, "
-			       "range=[0x%016lx-0x%016lx) (%luMB)\n",
+			size = md->num_pages << EFI_PAGE_SHIFT;
+
+			if ((size >> 40) > 0) {
+				size >>= 40;
+				unit = "TB";
+			} else if ((size >> 30) > 0) {
+				size >>= 30;
+				unit = "GB";
+			} else if ((size >> 20) > 0) {
+				size >>= 20;
+				unit = "MB";
+			} else {
+				size >>= 10;
+				unit = "KB";
+			}
+
+			printk("mem%02d: type=%2u, attr=0x%016lx, "
+			       "range=[0x%016lx-0x%016lx) (%4lu%s)\n",
 			       i, md->type, md->attribute, md->phys_addr,
-			       md->phys_addr + efi_md_size(md),
-			       md->num_pages >> (20 - EFI_PAGE_SHIFT));
+			       md->phys_addr + efi_md_size(md), size, unit);
 		}
 	}
 #endif

arch/ia64/kernel/iosapic.c

@@ -345,7 +345,7 @@ iosapic_set_affinity (unsigned int irq, cpumask_t mask)
 	if (cpus_empty(mask))
 		return;
 
-	if (reassign_irq_vector(irq, first_cpu(mask)))
+	if (irq_prepare_move(irq, first_cpu(mask)))
 		return;
 
 	dest = cpu_physical_id(first_cpu(mask));
@@ -397,6 +397,7 @@ iosapic_end_level_irq (unsigned int irq)
 	struct iosapic_rte_info *rte;
 	int do_unmask_irq = 0;
 
+	irq_complete_move(irq);
 	if (unlikely(irq_desc[irq].status & IRQ_MOVE_PENDING)) {
 		do_unmask_irq = 1;
 		mask_irq(irq);
@@ -450,6 +451,7 @@ iosapic_ack_edge_irq (unsigned int irq)
 {
 	irq_desc_t *idesc = irq_desc + irq;
 
+	irq_complete_move(irq);
 	move_native_irq(irq);
 	/*
 	 * Once we have recorded IRQ_PENDING already, we can mask the
@@ -532,7 +534,7 @@ iosapic_reassign_vector (int irq)
 	if (iosapic_intr_info[irq].count) {
 		new_irq = create_irq();
 		if (new_irq < 0)
-			panic("%s: out of interrupt vectors!\n", __FUNCTION__);
+			panic("%s: out of interrupt vectors!\n", __func__);
 		printk(KERN_INFO "Reassigning vector %d to %d\n",
 		       irq_to_vector(irq), irq_to_vector(new_irq));
 		memcpy(&iosapic_intr_info[new_irq], &iosapic_intr_info[irq],
@@ -597,7 +599,7 @@ register_intr (unsigned int gsi, int irq, unsigned char delivery,
 	index = find_iosapic(gsi);
 	if (index < 0) {
 		printk(KERN_WARNING "%s: No IOSAPIC for GSI %u\n",
-		       __FUNCTION__, gsi);
+		       __func__, gsi);
 		return -ENODEV;
 	}
 
@@ -606,7 +608,7 @@ register_intr (unsigned int gsi, int irq, unsigned char delivery,
 		rte = iosapic_alloc_rte();
 		if (!rte) {
 			printk(KERN_WARNING "%s: cannot allocate memory\n",
-			       __FUNCTION__);
+			       __func__);
 			return -ENOMEM;
 		}
 
@@ -623,7 +625,7 @@ register_intr (unsigned int gsi, int irq, unsigned char delivery,
 		    (info->trigger != trigger || info->polarity != polarity)){
 			printk (KERN_WARNING
 				"%s: cannot override the interrupt\n",
-				__FUNCTION__);
+				__func__);
 			return -EINVAL;
 		}
 		rte->refcnt++;
@@ -645,7 +647,7 @@ register_intr (unsigned int gsi, int irq, unsigned char delivery,
 		if (idesc->chip != &no_irq_type)
 			printk(KERN_WARNING
 			       "%s: changing vector %d from %s to %s\n",
-			       __FUNCTION__, irq_to_vector(irq),
+			       __func__, irq_to_vector(irq),
 			       idesc->chip->name, irq_type->name);
 		idesc->chip = irq_type;
 	}
@@ -918,7 +920,7 @@ iosapic_register_platform_intr (u32 int_type, unsigned int gsi,
 	      case ACPI_INTERRUPT_INIT:
 		irq = create_irq();
 		if (irq < 0)
-			panic("%s: out of interrupt vectors!\n", __FUNCTION__);
+			panic("%s: out of interrupt vectors!\n", __func__);
 		vector = irq_to_vector(irq);
 		delivery = IOSAPIC_INIT;
 		break;
@@ -929,7 +931,7 @@ iosapic_register_platform_intr (u32 int_type, unsigned int gsi,
 		mask = 1;
 		break;
 	      default:
-		printk(KERN_ERR "%s: invalid int type 0x%x\n", __FUNCTION__,
+		printk(KERN_ERR "%s: invalid int type 0x%x\n", __func__,
 		       int_type);
 		return -1;
 	}
@@ -994,7 +996,7 @@ iosapic_system_init (int system_pcat_compat)
 		 */
 		printk(KERN_INFO
 		       "%s: Disabling PC-AT compatible 8259 interrupts\n",
-		       __FUNCTION__);
+		       __func__);
 		outb(0xff, 0xA1);
 		outb(0xff, 0x21);
 	}
@@ -1009,7 +1011,7 @@ iosapic_alloc (void)
 		if (!iosapic_lists[index].addr)
 			return index;
 
-	printk(KERN_WARNING "%s: failed to allocate iosapic\n", __FUNCTION__);
+	printk(KERN_WARNING "%s: failed to allocate iosapic\n", __func__);
 	return -1;
 }
 
@@ -1107,14 +1109,14 @@ iosapic_remove (unsigned int gsi_base)
 	index = find_iosapic(gsi_base);
 	if (index < 0) {
 		printk(KERN_WARNING "%s: No IOSAPIC for GSI base %u\n",
-		       __FUNCTION__, gsi_base);
+		       __func__, gsi_base);
 		goto out;
 	}
 
 	if (iosapic_lists[index].rtes_inuse) {
 		err = -EBUSY;
 		printk(KERN_WARNING "%s: IOSAPIC for GSI base %u is busy\n",
-		       __FUNCTION__, gsi_base);
+		       __func__, gsi_base);
 		goto out;
 	}
 
@@ -1135,7 +1137,7 @@ map_iosapic_to_node(unsigned int gsi_base, int node)
 	index = find_iosapic(gsi_base);
 	if (index < 0) {
 		printk(KERN_WARNING "%s: No IOSAPIC for GSI %u\n",
-		       __FUNCTION__, gsi_base);
+		       __func__, gsi_base);
 		return;
 	}
 	iosapic_lists[index].node = node;

arch/ia64/kernel/irq_ia64.c

@@ -260,6 +260,8 @@ void __setup_vector_irq(int cpu)
 }
 
 #if defined(CONFIG_SMP) && (defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_DIG))
+#define IA64_IRQ_MOVE_VECTOR	IA64_DEF_FIRST_DEVICE_VECTOR
+
 static enum vector_domain_type {
 	VECTOR_DOMAIN_NONE,
 	VECTOR_DOMAIN_PERCPU
@@ -272,6 +274,101 @@ static cpumask_t vector_allocation_domain(int cpu)
 	return CPU_MASK_ALL;
 }
 
+static int __irq_prepare_move(int irq, int cpu)
+{
+	struct irq_cfg *cfg = &irq_cfg[irq];
+	int vector;
+	cpumask_t domain;
+
+	if (cfg->move_in_progress || cfg->move_cleanup_count)
+		return -EBUSY;
+	if (cfg->vector == IRQ_VECTOR_UNASSIGNED || !cpu_online(cpu))
+		return -EINVAL;
+	if (cpu_isset(cpu, cfg->domain))
+		return 0;
+	domain = vector_allocation_domain(cpu);
+	vector = find_unassigned_vector(domain);
+	if (vector < 0)
+		return -ENOSPC;
+	cfg->move_in_progress = 1;
+	cfg->old_domain = cfg->domain;
+	cfg->vector = IRQ_VECTOR_UNASSIGNED;
+	cfg->domain = CPU_MASK_NONE;
+	BUG_ON(__bind_irq_vector(irq, vector, domain));
+	return 0;
+}
+
+int irq_prepare_move(int irq, int cpu)
+{
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&vector_lock, flags);
+	ret = __irq_prepare_move(irq, cpu);
+	spin_unlock_irqrestore(&vector_lock, flags);
+	return ret;
+}
+
+void irq_complete_move(unsigned irq)
+{
+	struct irq_cfg *cfg = &irq_cfg[irq];
+	cpumask_t cleanup_mask;
+	int i;
+
+	if (likely(!cfg->move_in_progress))
+		return;
+
+	if (unlikely(cpu_isset(smp_processor_id(), cfg->old_domain)))
+		return;
+
+	cpus_and(cleanup_mask, cfg->old_domain, cpu_online_map);
+	cfg->move_cleanup_count = cpus_weight(cleanup_mask);
+	for_each_cpu_mask(i, cleanup_mask)
+		platform_send_ipi(i, IA64_IRQ_MOVE_VECTOR, IA64_IPI_DM_INT, 0);
+	cfg->move_in_progress = 0;
+}
+
+static irqreturn_t smp_irq_move_cleanup_interrupt(int irq, void *dev_id)
+{
+	int me = smp_processor_id();
+	ia64_vector vector;
+	unsigned long flags;
+
+	for (vector = IA64_FIRST_DEVICE_VECTOR;
+	     vector < IA64_LAST_DEVICE_VECTOR; vector++) {
+		int irq;
+		struct irq_desc *desc;
+		struct irq_cfg *cfg;
+		irq = __get_cpu_var(vector_irq)[vector];
+		if (irq < 0)
+			continue;
+
+		desc = irq_desc + irq;
+		cfg = irq_cfg + irq;
+		spin_lock(&desc->lock);
+		if (!cfg->move_cleanup_count)
+			goto unlock;
+
+		if (!cpu_isset(me, cfg->old_domain))
+			goto unlock;
+
+		spin_lock_irqsave(&vector_lock, flags);
+		__get_cpu_var(vector_irq)[vector] = -1;
+		cpu_clear(me, vector_table[vector]);
+		spin_unlock_irqrestore(&vector_lock, flags);
+		cfg->move_cleanup_count--;
+	unlock:
+		spin_unlock(&desc->lock);
+	}
+	return IRQ_HANDLED;
+}
+
+static struct irqaction irq_move_irqaction = {
+	.handler =	smp_irq_move_cleanup_interrupt,
+	.flags =	IRQF_DISABLED,
+	.name =		"irq_move"
+};
+
 static int __init parse_vector_domain(char *arg)
 {
 	if (!arg)
@@ -303,36 +400,6 @@ void destroy_and_reserve_irq(unsigned int irq)
 	spin_unlock_irqrestore(&vector_lock, flags);
 }
 
-static int __reassign_irq_vector(int irq, int cpu)
-{
-	struct irq_cfg *cfg = &irq_cfg[irq];
-	int vector;
-	cpumask_t domain;
-
-	if (cfg->vector == IRQ_VECTOR_UNASSIGNED || !cpu_online(cpu))
-		return -EINVAL;
-	if (cpu_isset(cpu, cfg->domain))
-		return 0;
-	domain = vector_allocation_domain(cpu);
-	vector = find_unassigned_vector(domain);
-	if (vector < 0)
-		return -ENOSPC;
-	__clear_irq_vector(irq);
-	BUG_ON(__bind_irq_vector(irq, vector, domain));
-	return 0;
-}
-
-int reassign_irq_vector(int irq, int cpu)
-{
-	unsigned long flags;
-	int ret;
-
-	spin_lock_irqsave(&vector_lock, flags);
-	ret = __reassign_irq_vector(irq, cpu);
-	spin_unlock_irqrestore(&vector_lock, flags);
-	return ret;
-}
-
 /*
  * Dynamic irq allocate and deallocation for MSI
  */
@@ -440,7 +507,7 @@ ia64_handle_irq (ia64_vector vector, struct pt_regs *regs)
 			if (unlikely(irq < 0)) {
 				printk(KERN_ERR "%s: Unexpected interrupt "
 				       "vector %d on CPU %d is not mapped "
-				       "to any IRQ!\n", __FUNCTION__, vector,
+				       "to any IRQ!\n", __func__, vector,
 				       smp_processor_id());
 			} else
 				generic_handle_irq(irq);
@@ -505,7 +572,7 @@ void ia64_process_pending_intr(void)
 			if (unlikely(irq < 0)) {
 				printk(KERN_ERR "%s: Unexpected interrupt "
 				       "vector %d on CPU %d not being mapped "
-				       "to any IRQ!!\n", __FUNCTION__, vector,
+				       "to any IRQ!!\n", __func__, vector,
 				       smp_processor_id());
 			} else {
 				vectors_in_migration[irq]=0;
@@ -578,6 +645,13 @@ init_IRQ (void)
 	register_percpu_irq(IA64_IPI_VECTOR, &ipi_irqaction);
 	register_percpu_irq(IA64_IPI_RESCHEDULE, &resched_irqaction);
 	register_percpu_irq(IA64_IPI_LOCAL_TLB_FLUSH, &tlb_irqaction);
+#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_DIG)
+	if (vector_domain_type != VECTOR_DOMAIN_NONE) {
+		BUG_ON(IA64_FIRST_DEVICE_VECTOR != IA64_IRQ_MOVE_VECTOR);
+		IA64_FIRST_DEVICE_VECTOR++;
+		register_percpu_irq(IA64_IRQ_MOVE_VECTOR, &irq_move_irqaction);
+	}
+#endif
 #endif
 #ifdef CONFIG_PERFMON
 	pfm_init_percpu();
@@ -592,11 +666,7 @@ ia64_send_ipi (int cpu, int vector, int delivery_mode, int redirect)
 	unsigned long ipi_data;
 	unsigned long phys_cpu_id;
 
-#ifdef CONFIG_SMP
 	phys_cpu_id = cpu_physical_id(cpu);
-#else
-	phys_cpu_id = (ia64_getreg(_IA64_REG_CR_LID) >> 16) & 0xffff;
-#endif
 
 	/*
 	 * cpu number is in 8bit ID and 8bit EID

arch/ia64/kernel/kprobes.c

@@ -838,7 +838,7 @@ out:
 	return 1;
 }
 
-int __kprobes kprobes_fault_handler(struct pt_regs *regs, int trapnr)
+int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
 {
 	struct kprobe *cur = kprobe_running();
 	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
@@ -1001,6 +1001,11 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
 	return 1;
 }
 
+/* ia64 does not need this */
+void __kprobes jprobe_return(void)
+{
+}
+
 int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
 {
 	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();

arch/ia64/kernel/mca.c

@@ -413,8 +413,8 @@ ia64_log_get(int sal_info_type, u8 **buffer, int irq_safe)
 		IA64_LOG_INDEX_INC(sal_info_type);
 		IA64_LOG_UNLOCK(sal_info_type);
 		if (irq_safe) {
-			IA64_MCA_DEBUG("%s: SAL error record type %d retrieved. "
-				       "Record length = %ld\n", __FUNCTION__, sal_info_type, total_len);
+			IA64_MCA_DEBUG("%s: SAL error record type %d retrieved. Record length = %ld\n",
+				       __func__, sal_info_type, total_len);
 		}
 		*buffer = (u8 *) log_buffer;
 		return total_len;
@@ -518,7 +518,7 @@ ia64_mca_cpe_int_handler (int cpe_irq, void *arg)
 	static DEFINE_SPINLOCK(cpe_history_lock);
 
 	IA64_MCA_DEBUG("%s: received interrupt vector = %#x on CPU %d\n",
-		       __FUNCTION__, cpe_irq, smp_processor_id());
+		       __func__, cpe_irq, smp_processor_id());
 
 	/* SAL spec states this should run w/ interrupts enabled */
 	local_irq_enable();
@@ -594,7 +594,7 @@ ia64_mca_register_cpev (int cpev)
 	}
 
 	IA64_MCA_DEBUG("%s: corrected platform error "
-		       "vector %#x registered\n", __FUNCTION__, cpev);
+		       "vector %#x registered\n", __func__, cpev);
 }
 #endif /* CONFIG_ACPI */
 
@@ -621,12 +621,11 @@ ia64_mca_cmc_vector_setup (void)
 	cmcv.cmcv_vector	= IA64_CMC_VECTOR;
 	ia64_setreg(_IA64_REG_CR_CMCV, cmcv.cmcv_regval);
 
-	IA64_MCA_DEBUG("%s: CPU %d corrected "
-		       "machine check vector %#x registered.\n",
-		       __FUNCTION__, smp_processor_id(), IA64_CMC_VECTOR);
+	IA64_MCA_DEBUG("%s: CPU %d corrected machine check vector %#x registered.\n",
+		       __func__, smp_processor_id(), IA64_CMC_VECTOR);
 
 	IA64_MCA_DEBUG("%s: CPU %d CMCV = %#016lx\n",
-		       __FUNCTION__, smp_processor_id(), ia64_getreg(_IA64_REG_CR_CMCV));
+		       __func__, smp_processor_id(), ia64_getreg(_IA64_REG_CR_CMCV));
 }
 
 /*
@@ -651,9 +650,8 @@ ia64_mca_cmc_vector_disable (void *dummy)
 	cmcv.cmcv_mask = 1; /* Mask/disable interrupt */
 	ia64_setreg(_IA64_REG_CR_CMCV, cmcv.cmcv_regval);
 
-	IA64_MCA_DEBUG("%s: CPU %d corrected "
-		       "machine check vector %#x disabled.\n",
-		       __FUNCTION__, smp_processor_id(), cmcv.cmcv_vector);
+	IA64_MCA_DEBUG("%s: CPU %d corrected machine check vector %#x disabled.\n",
+		       __func__, smp_processor_id(), cmcv.cmcv_vector);
 }
 
 /*
@@ -678,9 +676,8 @@ ia64_mca_cmc_vector_enable (void *dummy)
 	cmcv.cmcv_mask = 0; /* Unmask/enable interrupt */
 	ia64_setreg(_IA64_REG_CR_CMCV, cmcv.cmcv_regval);
 
-	IA64_MCA_DEBUG("%s: CPU %d corrected "
-		       "machine check vector %#x enabled.\n",
-		       __FUNCTION__, smp_processor_id(), cmcv.cmcv_vector);
+	IA64_MCA_DEBUG("%s: CPU %d corrected machine check vector %#x enabled.\n",
+		       __func__, smp_processor_id(), cmcv.cmcv_vector);
 }
 
 /*
@@ -767,7 +764,7 @@ ia64_mca_rendez_int_handler(int rendez_irq, void *arg)
 	local_irq_save(flags);
 	if (notify_die(DIE_MCA_RENDZVOUS_ENTER, "MCA", get_irq_regs(),
 		       (long)&nd, 0, 0) == NOTIFY_STOP)
-		ia64_mca_spin(__FUNCTION__);
+		ia64_mca_spin(__func__);
 
 	ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_DONE;
 	/* Register with the SAL monarch that the slave has
@@ -777,7 +774,7 @@ ia64_mca_rendez_int_handler(int rendez_irq, void *arg)
 
 	if (notify_die(DIE_MCA_RENDZVOUS_PROCESS, "MCA", get_irq_regs(),
 		       (long)&nd, 0, 0) == NOTIFY_STOP)
-		ia64_mca_spin(__FUNCTION__);
+		ia64_mca_spin(__func__);
 
 	/* Wait for the monarch cpu to exit. */
 	while (monarch_cpu != -1)
@@ -785,7 +782,7 @@ ia64_mca_rendez_int_handler(int rendez_irq, void *arg)
 
 	if (notify_die(DIE_MCA_RENDZVOUS_LEAVE, "MCA", get_irq_regs(),
 		       (long)&nd, 0, 0) == NOTIFY_STOP)
-		ia64_mca_spin(__FUNCTION__);
+		ia64_mca_spin(__func__);
 
 	ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_NOTDONE;
 	/* Enable all interrupts */
@@ -1230,7 +1227,7 @@ ia64_mca_handler(struct pt_regs *regs, struct switch_stack *sw,
 
 	if (notify_die(DIE_MCA_MONARCH_ENTER, "MCA", regs, (long)&nd, 0, 0)
 			== NOTIFY_STOP)
-		ia64_mca_spin(__FUNCTION__);
+		ia64_mca_spin(__func__);
 
 	ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_CONCURRENT_MCA;
 	if (sos->monarch) {
@@ -1246,7 +1243,7 @@ ia64_mca_handler(struct pt_regs *regs, struct switch_stack *sw,
 		ia64_mca_wakeup_all();
 		if (notify_die(DIE_MCA_MONARCH_PROCESS, "MCA", regs, (long)&nd, 0, 0)
 				== NOTIFY_STOP)
-			ia64_mca_spin(__FUNCTION__);
+			ia64_mca_spin(__func__);
 	} else {
 		while (cpu_isset(cpu, mca_cpu))
 			cpu_relax();	/* spin until monarch wakes us */
@@ -1276,7 +1273,7 @@ ia64_mca_handler(struct pt_regs *regs, struct switch_stack *sw,
 	}
 	if (notify_die(DIE_MCA_MONARCH_LEAVE, "MCA", regs, (long)&nd, 0, recover)
 			== NOTIFY_STOP)
-		ia64_mca_spin(__FUNCTION__);
+		ia64_mca_spin(__func__);
 
 
 	if (atomic_dec_return(&mca_count) > 0) {
@@ -1328,7 +1325,7 @@ ia64_mca_cmc_int_handler(int cmc_irq, void *arg)
 	static DEFINE_SPINLOCK(cmc_history_lock);
 
 	IA64_MCA_DEBUG("%s: received interrupt vector = %#x on CPU %d\n",
-		       __FUNCTION__, cmc_irq, smp_processor_id());
+		       __func__, cmc_irq, smp_processor_id());
 
 	/* SAL spec states this should run w/ interrupts enabled */
 	local_irq_enable();
@@ -1614,7 +1611,7 @@ ia64_init_handler(struct pt_regs *regs, struct switch_stack *sw,
 	 */
 	if (!sos->monarch && atomic_add_return(1, &slaves) == num_online_cpus()) {
 		mprintk(KERN_WARNING "%s: Promoting cpu %d to monarch.\n",
-		       __FUNCTION__, cpu);
+		        __func__, cpu);
 		atomic_dec(&slaves);
 		sos->monarch = 1;
 	}
@@ -1626,7 +1623,7 @@ ia64_init_handler(struct pt_regs *regs, struct switch_stack *sw,
 	 */
 	if (sos->monarch && atomic_add_return(1, &monarchs) > 1) {
 		mprintk(KERN_WARNING "%s: Demoting cpu %d to slave.\n",
-			       __FUNCTION__, cpu);
+			       __func__, cpu);
 		atomic_dec(&monarchs);
 		sos->monarch = 0;
 	}
@@ -1637,15 +1634,15 @@ ia64_init_handler(struct pt_regs *regs, struct switch_stack *sw,
 		       cpu_relax();	/* spin until monarch enters */
 		if (notify_die(DIE_INIT_SLAVE_ENTER, "INIT", regs, (long)&nd, 0, 0)
 				== NOTIFY_STOP)
-			ia64_mca_spin(__FUNCTION__);
+			ia64_mca_spin(__func__);
 		if (notify_die(DIE_INIT_SLAVE_PROCESS, "INIT", regs, (long)&nd, 0, 0)
 				== NOTIFY_STOP)
-			ia64_mca_spin(__FUNCTION__);
+			ia64_mca_spin(__func__);
 		while (monarch_cpu != -1)
 		       cpu_relax();	/* spin until monarch leaves */
 		if (notify_die(DIE_INIT_SLAVE_LEAVE, "INIT", regs, (long)&nd, 0, 0)
 				== NOTIFY_STOP)
-			ia64_mca_spin(__FUNCTION__);
+			ia64_mca_spin(__func__);
 		mprintk("Slave on cpu %d returning to normal service.\n", cpu);
 		set_curr_task(cpu, previous_current);
 		ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_NOTDONE;
@@ -1656,7 +1653,7 @@ ia64_init_handler(struct pt_regs *regs, struct switch_stack *sw,
 	monarch_cpu = cpu;
 	if (notify_die(DIE_INIT_MONARCH_ENTER, "INIT", regs, (long)&nd, 0, 0)
 			== NOTIFY_STOP)
-		ia64_mca_spin(__FUNCTION__);
+		ia64_mca_spin(__func__);
 
 	/*
 	 * Wait for a bit.  On some machines (e.g., HP's zx2000 and zx6000, INIT can be
@@ -1673,10 +1670,10 @@ ia64_init_handler(struct pt_regs *regs, struct switch_stack *sw,
 	 */
 	if (notify_die(DIE_INIT_MONARCH_PROCESS, "INIT", regs, (long)&nd, 0, 0)
 			== NOTIFY_STOP)
-		ia64_mca_spin(__FUNCTION__);
+		ia64_mca_spin(__func__);
 	if (notify_die(DIE_INIT_MONARCH_LEAVE, "INIT", regs, (long)&nd, 0, 0)
 			== NOTIFY_STOP)
-		ia64_mca_spin(__FUNCTION__);
+		ia64_mca_spin(__func__);
 	mprintk("\nINIT dump complete.  Monarch on cpu %d returning to normal service.\n", cpu);
 	atomic_dec(&monarchs);
 	set_curr_task(cpu, previous_current);
@@ -1884,7 +1881,7 @@ ia64_mca_init(void)
 		.priority = 0/* we need to notified last */
 	};
 
-	IA64_MCA_DEBUG("%s: begin\n", __FUNCTION__);
+	IA64_MCA_DEBUG("%s: begin\n", __func__);
 
 	/* Clear the Rendez checkin flag for all cpus */
 	for(i = 0 ; i < NR_CPUS; i++)
@@ -1928,7 +1925,7 @@ ia64_mca_init(void)
 		return;
 	}
 
-	IA64_MCA_DEBUG("%s: registered MCA rendezvous spinloop and wakeup mech.\n", __FUNCTION__);
+	IA64_MCA_DEBUG("%s: registered MCA rendezvous spinloop and wakeup mech.\n", __func__);
 
 	ia64_mc_info.imi_mca_handler        = ia64_tpa(mca_hldlr_ptr->fp);
 	/*
@@ -1949,7 +1946,7 @@ ia64_mca_init(void)
 		return;
 	}
 
-	IA64_MCA_DEBUG("%s: registered OS MCA handler with SAL at 0x%lx, gp = 0x%lx\n", __FUNCTION__,
+	IA64_MCA_DEBUG("%s: registered OS MCA handler with SAL at 0x%lx, gp = 0x%lx\n", __func__,
 		       ia64_mc_info.imi_mca_handler, ia64_tpa(mca_hldlr_ptr->gp));
 
 	/*
@@ -1961,7 +1958,7 @@ ia64_mca_init(void)
 	ia64_mc_info.imi_slave_init_handler		= ia64_tpa(init_hldlr_ptr_slave->fp);
 	ia64_mc_info.imi_slave_init_handler_size	= 0;
 
-	IA64_MCA_DEBUG("%s: OS INIT handler at %lx\n", __FUNCTION__,
+	IA64_MCA_DEBUG("%s: OS INIT handler at %lx\n", __func__,
 		       ia64_mc_info.imi_monarch_init_handler);
 
 	/* Register the os init handler with SAL */
@@ -1982,7 +1979,7 @@ ia64_mca_init(void)
 		return;
 	}
 
-	IA64_MCA_DEBUG("%s: registered OS INIT handler with SAL\n", __FUNCTION__);
+	IA64_MCA_DEBUG("%s: registered OS INIT handler with SAL\n", __func__);
 
 	/*
 	 *  Configure the CMCI/P vector and handler. Interrupts for CMC are
@@ -2042,7 +2039,7 @@ ia64_mca_late_init(void)
 	cmc_polling_enabled = 0;
 	schedule_work(&cmc_enable_work);
 
-	IA64_MCA_DEBUG("%s: CMCI/P setup and enabled.\n", __FUNCTION__);
+	IA64_MCA_DEBUG("%s: CMCI/P setup and enabled.\n", __func__);
 
 #ifdef CONFIG_ACPI
 	/* Setup the CPEI/P vector and handler */
@@ -2065,17 +2062,17 @@ ia64_mca_late_init(void)
 				ia64_cpe_irq = irq;
 				ia64_mca_register_cpev(cpe_vector);
 				IA64_MCA_DEBUG("%s: CPEI/P setup and enabled.\n",
-					__FUNCTION__);
+					__func__);
 				return 0;
 			}
 			printk(KERN_ERR "%s: Failed to find irq for CPE "
 					"interrupt handler, vector %d\n",
-					__FUNCTION__, cpe_vector);
+					__func__, cpe_vector);
 		}
 		/* If platform doesn't support CPEI, get the timer going. */
 		if (cpe_poll_enabled) {
 			ia64_mca_cpe_poll(0UL);
-			IA64_MCA_DEBUG("%s: CPEP setup and enabled.\n", __FUNCTION__);
+			IA64_MCA_DEBUG("%s: CPEP setup and enabled.\n", __func__);
 		}
 	}
 #endif

arch/ia64/kernel/module.c

@@ -493,7 +493,7 @@ module_frob_arch_sections (Elf_Ehdr *ehdr, Elf_Shdr *sechdrs, char *secstrings,
 	mod->arch.opd->sh_addralign = 8;
 	mod->arch.opd->sh_size = fdescs * sizeof(struct fdesc);
 	DEBUGP("%s: core.plt=%lx, init.plt=%lx, got=%lx, fdesc=%lx\n",
-	       __FUNCTION__, mod->arch.core_plt->sh_size, mod->arch.init_plt->sh_size,
+	       __func__, mod->arch.core_plt->sh_size, mod->arch.init_plt->sh_size,
 	       mod->arch.got->sh_size, mod->arch.opd->sh_size);
 	return 0;
 }
@@ -585,7 +585,7 @@ get_plt (struct module *mod, const struct insn *insn, uint64_t value, int *okp)
 #if ARCH_MODULE_DEBUG
 	if (plt_target(plt) != target_ip) {
 		printk("%s: mistargeted PLT: wanted %lx, got %lx\n",
-		       __FUNCTION__, target_ip, plt_target(plt));
+		       __func__, target_ip, plt_target(plt));
 		*okp = 0;
 		return 0;
 	}
@@ -703,7 +703,7 @@ do_reloc (struct module *mod, uint8_t r_type, Elf64_Sym *sym, uint64_t addend,
 		if (r_type == R_IA64_PCREL21BI) {
 			if (!is_internal(mod, val)) {
 				printk(KERN_ERR "%s: %s reloc against non-local symbol (%lx)\n",
-				       __FUNCTION__, reloc_name[r_type], val);
+				       __func__, reloc_name[r_type], val);
 				return -ENOEXEC;
 			}
 			format = RF_INSN21B;
@@ -737,7 +737,7 @@ do_reloc (struct module *mod, uint8_t r_type, Elf64_Sym *sym, uint64_t addend,
 		      case R_IA64_LDXMOV:
 			if (gp_addressable(mod, val)) {
 				/* turn "ld8" into "mov": */
-				DEBUGP("%s: patching ld8 at %p to mov\n", __FUNCTION__, location);
+				DEBUGP("%s: patching ld8 at %p to mov\n", __func__, location);
 				ia64_patch((u64) location, 0x1fff80fe000UL, 0x10000000000UL);
 			}
 			return 0;
@@ -771,7 +771,7 @@ do_reloc (struct module *mod, uint8_t r_type, Elf64_Sym *sym, uint64_t addend,
 	if (!ok)
 		return -ENOEXEC;
 
-	DEBUGP("%s: [%p]<-%016lx = %s(%lx)\n", __FUNCTION__, location, val,
+	DEBUGP("%s: [%p]<-%016lx = %s(%lx)\n", __func__, location, val,
 	       reloc_name[r_type] ? reloc_name[r_type] : "?", sym->st_value + addend);
 
 	switch (format) {
@@ -807,7 +807,7 @@ apply_relocate_add (Elf64_Shdr *sechdrs, const char *strtab, unsigned int symind
 	Elf64_Shdr *target_sec;
 	int ret;
 
-	DEBUGP("%s: applying section %u (%u relocs) to %u\n", __FUNCTION__,
+	DEBUGP("%s: applying section %u (%u relocs) to %u\n", __func__,
 	       relsec, n, sechdrs[relsec].sh_info);
 
 	target_sec = sechdrs + sechdrs[relsec].sh_info;
@@ -835,7 +835,7 @@ apply_relocate_add (Elf64_Shdr *sechdrs, const char *strtab, unsigned int symind
 			gp = mod->core_size / 2;
 		gp = (uint64_t) mod->module_core + ((gp + 7) & -8);
 		mod->arch.gp = gp;
-		DEBUGP("%s: placing gp at 0x%lx\n", __FUNCTION__, gp);
+		DEBUGP("%s: placing gp at 0x%lx\n", __func__, gp);
 	}
 
 	for (i = 0; i < n; i++) {
@@ -903,7 +903,7 @@ register_unwind_table (struct module *mod)
 		init = start + num_core;
 	}
 
-	DEBUGP("%s: name=%s, gp=%lx, num_init=%lu, num_core=%lu\n", __FUNCTION__,
+	DEBUGP("%s: name=%s, gp=%lx, num_init=%lu, num_core=%lu\n", __func__,
 	       mod->name, mod->arch.gp, num_init, num_core);
 
 	/*
@@ -912,13 +912,13 @@ register_unwind_table (struct module *mod)
 	if (num_core > 0) {
 		mod->arch.core_unw_table = unw_add_unwind_table(mod->name, 0, mod->arch.gp,
 								core, core + num_core);
-		DEBUGP("%s:  core: handle=%p [%p-%p)\n", __FUNCTION__,
+		DEBUGP("%s:  core: handle=%p [%p-%p)\n", __func__,
 		       mod->arch.core_unw_table, core, core + num_core);
 	}
 	if (num_init > 0) {
 		mod->arch.init_unw_table = unw_add_unwind_table(mod->name, 0, mod->arch.gp,
 								init, init + num_init);
-		DEBUGP("%s:  init: handle=%p [%p-%p)\n", __FUNCTION__,
+		DEBUGP("%s:  init: handle=%p [%p-%p)\n", __func__,
 		       mod->arch.init_unw_table, init, init + num_init);
 	}
 }
@@ -926,7 +926,7 @@ register_unwind_table (struct module *mod)
 int
 module_finalize (const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs, struct module *mod)
 {
-	DEBUGP("%s: init: entry=%p\n", __FUNCTION__, mod->init);
+	DEBUGP("%s: init: entry=%p\n", __func__, mod->init);
 	if (mod->arch.unwind)
 		register_unwind_table(mod);
 	return 0;

arch/ia64/kernel/msi_ia64.c

@@ -57,7 +57,7 @@ static void ia64_set_msi_irq_affinity(unsigned int irq, cpumask_t cpu_mask)
 	if (!cpu_online(cpu))
 		return;
 
-	if (reassign_irq_vector(irq, cpu))
+	if (irq_prepare_move(irq, cpu))
 		return;
 
 	read_msi_msg(irq, &msg);
@@ -119,6 +119,7 @@ void ia64_teardown_msi_irq(unsigned int irq)
 
 static void ia64_ack_msi_irq(unsigned int irq)
 {
+	irq_complete_move(irq);
 	move_native_irq(irq);
 	ia64_eoi();
 }

arch/ia64/kernel/perfmon.c

@@ -227,12 +227,12 @@
 #ifdef PFM_DEBUGGING
 #define DPRINT(a) \
 	do { \
-		if (unlikely(pfm_sysctl.debug >0)) { printk("%s.%d: CPU%d [%d] ", __FUNCTION__, __LINE__, smp_processor_id(), task_pid_nr(current)); printk a; } \
+		if (unlikely(pfm_sysctl.debug >0)) { printk("%s.%d: CPU%d [%d] ", __func__, __LINE__, smp_processor_id(), task_pid_nr(current)); printk a; } \
 	} while (0)
 
 #define DPRINT_ovfl(a) \
 	do { \
-		if (unlikely(pfm_sysctl.debug > 0 && pfm_sysctl.debug_ovfl >0)) { printk("%s.%d: CPU%d [%d] ", __FUNCTION__, __LINE__, smp_processor_id(), task_pid_nr(current)); printk a; } \
+		if (unlikely(pfm_sysctl.debug > 0 && pfm_sysctl.debug_ovfl >0)) { printk("%s.%d: CPU%d [%d] ", __func__, __LINE__, smp_processor_id(), task_pid_nr(current)); printk a; } \
 	} while (0)
 #endif
 

arch/ia64/kernel/perfmon_default_smpl.c

@@ -24,12 +24,12 @@ MODULE_LICENSE("GPL");
 #ifdef DEFAULT_DEBUG
 #define DPRINT(a) \
 	do { \
-		if (unlikely(pfm_sysctl.debug >0)) { printk("%s.%d: CPU%d ", __FUNCTION__, __LINE__, smp_processor_id()); printk a; } \
+		if (unlikely(pfm_sysctl.debug >0)) { printk("%s.%d: CPU%d ", __func__, __LINE__, smp_processor_id()); printk a; } \
 	} while (0)
 
 #define DPRINT_ovfl(a) \
 	do { \
-		if (unlikely(pfm_sysctl.debug > 0 && pfm_sysctl.debug_ovfl >0)) { printk("%s.%d: CPU%d ", __FUNCTION__, __LINE__, smp_processor_id()); printk a; } \
+		if (unlikely(pfm_sysctl.debug > 0 && pfm_sysctl.debug_ovfl >0)) { printk("%s.%d: CPU%d ", __func__, __LINE__, smp_processor_id()); printk a; } \
 	} while (0)
 
 #else

arch/ia64/kernel/ptrace.c

@@ -697,52 +697,6 @@ thread_matches (struct task_struct *thread, unsigned long addr)
 	return 1;	/* looks like we've got a winner */
 }
 
-/*
- * GDB apparently wants to be able to read the register-backing store
- * of any thread when attached to a given process.  If we are peeking
- * or poking an address that happens to reside in the kernel-backing
- * store of another thread, we need to attach to that thread, because
- * otherwise we end up accessing stale data.
- *
- * task_list_lock must be read-locked before calling this routine!
- */
-static struct task_struct *
-find_thread_for_addr (struct task_struct *child, unsigned long addr)
-{
-	struct task_struct *p;
-	struct mm_struct *mm;
-	struct list_head *this, *next;
-	int mm_users;
-
-	if (!(mm = get_task_mm(child)))
-		return child;
-
-	/* -1 because of our get_task_mm(): */
-	mm_users = atomic_read(&mm->mm_users) - 1;
-	if (mm_users <= 1)
-		goto out;		/* not multi-threaded */
-
-	/*
-	 * Traverse the current process' children list.  Every task that
-	 * one attaches to becomes a child.  And it is only attached children
-	 * of the debugger that are of interest (ptrace_check_attach checks
-	 * for this).
-	 */
- 	list_for_each_safe(this, next, &current->children) {
-		p = list_entry(this, struct task_struct, sibling);
-		if (p->tgid != child->tgid)
-			continue;
-		if (thread_matches(p, addr)) {
-			child = p;
-			goto out;
-		}
-	}
-
-  out:
-	mmput(mm);
-	return child;
-}
-
 /*
  * Write f32-f127 back to task->thread.fph if it has been modified.
  */
@@ -826,14 +780,14 @@ convert_to_non_syscall (struct task_struct *child, struct pt_regs  *pt,
 		if ((long)((unsigned long)child + IA64_STK_OFFSET - sp)
 		    < IA64_PT_REGS_SIZE) {
 			dprintk("ptrace.%s: ran off the top of the kernel "
-				"stack\n", __FUNCTION__);
+				"stack\n", __func__);
 			return;
 		}
 		if (unw_get_pr (&prev_info, &pr) < 0) {
 			unw_get_rp(&prev_info, &ip);
 			dprintk("ptrace.%s: failed to read "
 				"predicate register (ip=0x%lx)\n",
-				__FUNCTION__, ip);
+				__func__, ip);
 			return;
 		}
 		if (unw_is_intr_frame(&info)
@@ -908,7 +862,7 @@ static int
 access_uarea (struct task_struct *child, unsigned long addr,
 	      unsigned long *data, int write_access)
 {
-	unsigned long *ptr, regnum, urbs_end, rnat_addr, cfm;
+	unsigned long *ptr, regnum, urbs_end, cfm;
 	struct switch_stack *sw;
 	struct pt_regs *pt;
 #	define pt_reg_addr(pt, reg)	((void *)			    \
@@ -1011,14 +965,9 @@ access_uarea (struct task_struct *child, unsigned long addr,
 			 * the kernel was entered.
 			 *
 			 * Furthermore, when changing the contents of
-			 * PT_AR_BSP (or PT_CFM) we MUST copy any
-			 * users-level stacked registers that are
-			 * stored on the kernel stack back to
-			 * user-space because otherwise, we might end
-			 * up clobbering kernel stacked registers.
-			 * Also, if this happens while the task is
-			 * blocked in a system call, which convert the
-			 * state such that the non-system-call exit
+			 * PT_AR_BSP (or PT_CFM) while the task is
+			 * blocked in a system call, convert the state
+			 * so that the non-system-call exit
 			 * path is used.  This ensures that the proper
 			 * state will be picked up when resuming
 			 * execution.  However, it *also* means that
@@ -1035,10 +984,6 @@ access_uarea (struct task_struct *child, unsigned long addr,
 			urbs_end = ia64_get_user_rbs_end(child, pt, &cfm);
 			if (write_access) {
 				if (*data != urbs_end) {
-					if (ia64_sync_user_rbs(child, sw,
-							       pt->ar_bspstore,
-							       urbs_end) < 0)
-						return -1;
 					if (in_syscall(pt))
 						convert_to_non_syscall(child,
 								       pt,
@@ -1058,10 +1003,6 @@ access_uarea (struct task_struct *child, unsigned long addr,
 			urbs_end = ia64_get_user_rbs_end(child, pt, &cfm);
 			if (write_access) {
 				if (((cfm ^ *data) & PFM_MASK) != 0) {
-					if (ia64_sync_user_rbs(child, sw,
-							       pt->ar_bspstore,
-							       urbs_end) < 0)
-						return -1;
 					if (in_syscall(pt))
 						convert_to_non_syscall(child,
 								       pt,
@@ -1093,16 +1034,8 @@ access_uarea (struct task_struct *child, unsigned long addr,
 			return 0;
 
 		      case PT_AR_RNAT:
-			urbs_end = ia64_get_user_rbs_end(child, pt, NULL);
-			rnat_addr = (long) ia64_rse_rnat_addr((long *)
-							      urbs_end);
-			if (write_access)
-				return ia64_poke(child, sw, urbs_end,
-						 rnat_addr, *data);
-			else
-				return ia64_peek(child, sw, urbs_end,
-						 rnat_addr, data);
-
+			ptr = pt_reg_addr(pt, ar_rnat);
+			break;
 		      case PT_R1:
 			ptr = pt_reg_addr(pt, r1);
 			break;
@@ -1521,215 +1454,97 @@ ptrace_setregs (struct task_struct *child, struct pt_all_user_regs __user *ppr)
 	return ret;
 }
 
-/*
- * Called by kernel/ptrace.c when detaching..
- *
- * Make sure the single step bit is not set.
- */
 void
-ptrace_disable (struct task_struct *child)
+user_enable_single_step (struct task_struct *child)
 {
 	struct ia64_psr *child_psr = ia64_psr(task_pt_regs(child));
 
-	/* make sure the single step/taken-branch trap bits are not set: */
-	clear_tsk_thread_flag(child, TIF_SINGLESTEP);
-	child_psr->ss = 0;
-	child_psr->tb = 0;
+	set_tsk_thread_flag(child, TIF_SINGLESTEP);
+	child_psr->ss = 1;
 }
 
-asmlinkage long
-sys_ptrace (long request, pid_t pid, unsigned long addr, unsigned long data)
+void
+user_enable_block_step (struct task_struct *child)
 {
-	struct pt_regs *pt;
-	unsigned long urbs_end, peek_or_poke;
-	struct task_struct *child;
-	struct switch_stack *sw;
-	long ret;
-	struct unw_frame_info info;
+	struct ia64_psr *child_psr = ia64_psr(task_pt_regs(child));
 
-	lock_kernel();
-	ret = -EPERM;
-	if (request == PTRACE_TRACEME) {
-		ret = ptrace_traceme();
-		goto out;
-	}
+	set_tsk_thread_flag(child, TIF_SINGLESTEP);
+	child_psr->tb = 1;
+}
 
-	peek_or_poke = (request == PTRACE_PEEKTEXT
-			|| request == PTRACE_PEEKDATA
-			|| request == PTRACE_POKETEXT
-			|| request == PTRACE_POKEDATA);
-	ret = -ESRCH;
-	read_lock(&tasklist_lock);
-	{
-		child = find_task_by_pid(pid);
-		if (child) {
-			if (peek_or_poke)
-				child = find_thread_for_addr(child, addr);
-			get_task_struct(child);
-		}
-	}
-	read_unlock(&tasklist_lock);
-	if (!child)
-		goto out;
-	ret = -EPERM;
-	if (pid == 1)		/* no messing around with init! */
-		goto out_tsk;
-
-	if (request == PTRACE_ATTACH) {
-		ret = ptrace_attach(child);
-		if (!ret)
-			arch_ptrace_attach(child);
-		goto out_tsk;
-	}
+void
+user_disable_single_step (struct task_struct *child)
+{
+	struct ia64_psr *child_psr = ia64_psr(task_pt_regs(child));
 
-	ret = ptrace_check_attach(child, request == PTRACE_KILL);
-	if (ret < 0)
-		goto out_tsk;
+	/* make sure the single step/taken-branch trap bits are not set: */
+	clear_tsk_thread_flag(child, TIF_SINGLESTEP);
+	child_psr->ss = 0;
+	child_psr->tb = 0;
+}
 
-	pt = task_pt_regs(child);
-	sw = (struct switch_stack *) (child->thread.ksp + 16);
+/*
+ * Called by kernel/ptrace.c when detaching..
+ *
+ * Make sure the single step bit is not set.
+ */
+void
+ptrace_disable (struct task_struct *child)
+{
+	user_disable_single_step(child);
+}
 
+long
+arch_ptrace (struct task_struct *child, long request, long addr, long data)
+{
 	switch (request) {
-	      case PTRACE_PEEKTEXT:
-	      case PTRACE_PEEKDATA:
+	case PTRACE_PEEKTEXT:
+	case PTRACE_PEEKDATA:
 		/* read word at location addr */
-		urbs_end = ia64_get_user_rbs_end(child, pt, NULL);
-		ret = ia64_peek(child, sw, urbs_end, addr, &data);
-		if (ret == 0) {
-			ret = data;
-			/* ensure "ret" is not mistaken as an error code: */
-			force_successful_syscall_return();
-		}
-		goto out_tsk;
-
-	      case PTRACE_POKETEXT:
-	      case PTRACE_POKEDATA:
-		/* write the word at location addr */
-		urbs_end = ia64_get_user_rbs_end(child, pt, NULL);
-		ret = ia64_poke(child, sw, urbs_end, addr, data);
-
-		/* Make sure user RBS has the latest data */
-		unw_init_from_blocked_task(&info, child);
-		do_sync_rbs(&info, ia64_sync_user_rbs);
+		if (access_process_vm(child, addr, &data, sizeof(data), 0)
+		    != sizeof(data))
+			return -EIO;
+		/* ensure return value is not mistaken for error code */
+		force_successful_syscall_return();
+		return data;
 
-		goto out_tsk;
+	/* PTRACE_POKETEXT and PTRACE_POKEDATA is handled
+	 * by the generic ptrace_request().
+	 */
 
-	      case PTRACE_PEEKUSR:
+	case PTRACE_PEEKUSR:
 		/* read the word at addr in the USER area */
-		if (access_uarea(child, addr, &data, 0) < 0) {
-			ret = -EIO;
-			goto out_tsk;
-		}
-		ret = data;
-		/* ensure "ret" is not mistaken as an error code */
+		if (access_uarea(child, addr, &data, 0) < 0)
+			return -EIO;
+		/* ensure return value is not mistaken for error code */
 		force_successful_syscall_return();
-		goto out_tsk;
+		return data;
 
-	      case PTRACE_POKEUSR:
+	case PTRACE_POKEUSR:
 		/* write the word at addr in the USER area */
-		if (access_uarea(child, addr, &data, 1) < 0) {
-			ret = -EIO;
-			goto out_tsk;
-		}
-		ret = 0;
-		goto out_tsk;
+		if (access_uarea(child, addr, &data, 1) < 0)
+			return -EIO;
+		return 0;
 
-	      case PTRACE_OLD_GETSIGINFO:
+	case PTRACE_OLD_GETSIGINFO:
 		/* for backwards-compatibility */
-		ret = ptrace_request(child, PTRACE_GETSIGINFO, addr, data);
-		goto out_tsk;
+		return ptrace_request(child, PTRACE_GETSIGINFO, addr, data);
 
-	      case PTRACE_OLD_SETSIGINFO:
+	case PTRACE_OLD_SETSIGINFO:
 		/* for backwards-compatibility */
-		ret = ptrace_request(child, PTRACE_SETSIGINFO, addr, data);
-		goto out_tsk;
-
-	      case PTRACE_SYSCALL:
-		/* continue and stop at next (return from) syscall */
-	      case PTRACE_CONT:
-		/* restart after signal. */
-		ret = -EIO;
-		if (!valid_signal(data))
-			goto out_tsk;
-		if (request == PTRACE_SYSCALL)
-			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		else
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		child->exit_code = data;
+		return ptrace_request(child, PTRACE_SETSIGINFO, addr, data);
 
-		/*
-		 * Make sure the single step/taken-branch trap bits
-		 * are not set:
-		 */
-		clear_tsk_thread_flag(child, TIF_SINGLESTEP);
-		ia64_psr(pt)->ss = 0;
-		ia64_psr(pt)->tb = 0;
+	case PTRACE_GETREGS:
+		return ptrace_getregs(child,
+				      (struct pt_all_user_regs __user *) data);
 
-		wake_up_process(child);
-		ret = 0;
-		goto out_tsk;
+	case PTRACE_SETREGS:
+		return ptrace_setregs(child,
+				      (struct pt_all_user_regs __user *) data);
 
-	      case PTRACE_KILL:
-		/*
-		 * Make the child exit.  Best I can do is send it a
-		 * sigkill.  Perhaps it should be put in the status
-		 * that it wants to exit.
-		 */
-		if (child->exit_state == EXIT_ZOMBIE)
-			/* already dead */
-			goto out_tsk;
-		child->exit_code = SIGKILL;
-
-		ptrace_disable(child);
-		wake_up_process(child);
-		ret = 0;
-		goto out_tsk;
-
-	      case PTRACE_SINGLESTEP:
-		/* let child execute for one instruction */
-	      case PTRACE_SINGLEBLOCK:
-		ret = -EIO;
-		if (!valid_signal(data))
-			goto out_tsk;
-
-		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		set_tsk_thread_flag(child, TIF_SINGLESTEP);
-		if (request == PTRACE_SINGLESTEP) {
-			ia64_psr(pt)->ss = 1;
-		} else {
-			ia64_psr(pt)->tb = 1;
-		}
-		child->exit_code = data;
-
-		/* give it a chance to run. */
-		wake_up_process(child);
-		ret = 0;
-		goto out_tsk;
-
-	      case PTRACE_DETACH:
-		/* detach a process that was attached. */
-		ret = ptrace_detach(child, data);
-		goto out_tsk;
-
-	      case PTRACE_GETREGS:
-		ret = ptrace_getregs(child,
-				     (struct pt_all_user_regs __user *) data);
-		goto out_tsk;
-
-	      case PTRACE_SETREGS:
-		ret = ptrace_setregs(child,
-				     (struct pt_all_user_regs __user *) data);
-		goto out_tsk;
-
-	      default:
-		ret = ptrace_request(child, request, addr, data);
-		goto out_tsk;
+	default:
+		return ptrace_request(child, request, addr, data);
 	}
-  out_tsk:
-	put_task_struct(child);
-  out:
-	unlock_kernel();
-	return ret;
 }
 
 

arch/ia64/kernel/sal.c

@@ -109,6 +109,13 @@ check_versions (struct ia64_sal_systab *systab)
 		sal_revision = SAL_VERSION_CODE(2, 8);
 		sal_version = SAL_VERSION_CODE(0, 0);
 	}
+
+	if (ia64_platform_is("sn2") && (sal_revision == SAL_VERSION_CODE(2, 9)))
+		/*
+		 * SGI Altix has hard-coded version 2.9 in their prom
+		 * but they actually implement 3.2, so let's fix it here.
+		 */
+		sal_revision = SAL_VERSION_CODE(3, 2);
 }
 
 static void __init

arch/ia64/kernel/setup.c

@@ -690,7 +690,7 @@ get_model_name(__u8 family, __u8 model)
 	if (overflow++ == 0)
 		printk(KERN_ERR
 		       "%s: Table overflow. Some processor model information will be missing\n",
-		       __FUNCTION__);
+		       __func__);
 	return "Unknown";
 }
 
@@ -785,7 +785,7 @@ get_max_cacheline_size (void)
         status = ia64_pal_cache_summary(&levels, &unique_caches);
         if (status != 0) {
                 printk(KERN_ERR "%s: ia64_pal_cache_summary() failed (status=%ld)\n",
-                       __FUNCTION__, status);
+                       __func__, status);
                 max = SMP_CACHE_BYTES;
 		/* Safest setup for "flush_icache_range()" */
 		ia64_i_cache_stride_shift = I_CACHE_STRIDE_SHIFT;
@@ -798,7 +798,7 @@ get_max_cacheline_size (void)
 		if (status != 0) {
 			printk(KERN_ERR
 			       "%s: ia64_pal_cache_config_info(l=%lu, 2) failed (status=%ld)\n",
-			       __FUNCTION__, l, status);
+			       __func__, l, status);
 			max = SMP_CACHE_BYTES;
 			/* The safest setup for "flush_icache_range()" */
 			cci.pcci_stride = I_CACHE_STRIDE_SHIFT;
@@ -814,7 +814,7 @@ get_max_cacheline_size (void)
 			if (status != 0) {
 				printk(KERN_ERR
 				"%s: ia64_pal_cache_config_info(l=%lu, 1) failed (status=%ld)\n",
-					__FUNCTION__, l, status);
+					__func__, l, status);
 				/* The safest setup for "flush_icache_range()" */
 				cci.pcci_stride = I_CACHE_STRIDE_SHIFT;
 			}

arch/ia64/kernel/signal.c

@@ -342,15 +342,33 @@ setup_frame (int sig, struct k_sigaction *ka, siginfo_t *info, sigset_t *set,
 
 	new_sp = scr->pt.r12;
 	tramp_addr = (unsigned long) __kernel_sigtramp;
-	if ((ka->sa.sa_flags & SA_ONSTACK) && sas_ss_flags(new_sp) == 0) {
-		new_sp = current->sas_ss_sp + current->sas_ss_size;
-		/*
-		 * We need to check for the register stack being on the signal stack
-		 * separately, because it's switched separately (memory stack is switched
-		 * in the kernel, register stack is switched in the signal trampoline).
-		 */
-		if (!rbs_on_sig_stack(scr->pt.ar_bspstore))
-			new_rbs = (current->sas_ss_sp + sizeof(long) - 1) & ~(sizeof(long) - 1);
+	if (ka->sa.sa_flags & SA_ONSTACK) {
+		int onstack = sas_ss_flags(new_sp);
+
+		if (onstack == 0) {
+			new_sp = current->sas_ss_sp + current->sas_ss_size;
+			/*
+			 * We need to check for the register stack being on the
+			 * signal stack separately, because it's switched
+			 * separately (memory stack is switched in the kernel,
+			 * register stack is switched in the signal trampoline).
+			 */
+			if (!rbs_on_sig_stack(scr->pt.ar_bspstore))
+				new_rbs = ALIGN(current->sas_ss_sp,
+						sizeof(long));
+		} else if (onstack == SS_ONSTACK) {
+			unsigned long check_sp;
+
+			/*
+			 * If we are on the alternate signal stack and would
+			 * overflow it, don't. Return an always-bogus address
+			 * instead so we will die with SIGSEGV.
+			 */
+			check_sp = (new_sp - sizeof(*frame)) & -STACK_ALIGN;
+			if (!likely(on_sig_stack(check_sp)))
+				return force_sigsegv_info(sig, (void __user *)
+							  check_sp);
+		}
 	}
 	frame = (void __user *) ((new_sp - sizeof(*frame)) & -STACK_ALIGN);
 

arch/ia64/kernel/unaligned.c

@@ -28,7 +28,7 @@ extern int die_if_kernel(char *str, struct pt_regs *regs, long err);
 #undef DEBUG_UNALIGNED_TRAP
 
 #ifdef DEBUG_UNALIGNED_TRAP
-# define DPRINT(a...)	do { printk("%s %u: ", __FUNCTION__, __LINE__); printk (a); } while (0)
+# define DPRINT(a...)	do { printk("%s %u: ", __func__, __LINE__); printk (a); } while (0)
 # define DDUMP(str,vp,len)	dump(str, vp, len)
 
 static void
@@ -674,7 +674,7 @@ emulate_load_updates (update_t type, load_store_t ld, struct pt_regs *regs, unsi
 	 * just in case.
 	 */
 	if (ld.x6_op == 1 || ld.x6_op == 3) {
-		printk(KERN_ERR "%s: register update on speculative load, error\n", __FUNCTION__);
+		printk(KERN_ERR "%s: register update on speculative load, error\n", __func__);
 		if (die_if_kernel("unaligned reference on speculative load with register update\n",
 				  regs, 30))
 			return;
@@ -1104,7 +1104,7 @@ emulate_load_floatpair (unsigned long ifa, load_store_t ld, struct pt_regs *regs
 		 */
 		if (ld.x6_op == 1 || ld.x6_op == 3)
 			printk(KERN_ERR "%s: register update on speculative load pair, error\n",
-			       __FUNCTION__);
+			       __func__);
 
 		setreg(ld.r3, ifa, 0, regs);
 	}

arch/ia64/kernel/unwind.c

@@ -257,7 +257,7 @@ pt_regs_off (unsigned long reg)
 		off = unw.pt_regs_offsets[reg];
 
 	if (off < 0) {
-		UNW_DPRINT(0, "unwind.%s: bad scratch reg r%lu\n", __FUNCTION__, reg);
+		UNW_DPRINT(0, "unwind.%s: bad scratch reg r%lu\n", __func__, reg);
 		off = 0;
 	}
 	return (unsigned long) off;
@@ -268,13 +268,13 @@ get_scratch_regs (struct unw_frame_info *info)
 {
 	if (!info->pt) {
 		/* This should not happen with valid unwind info.  */
-		UNW_DPRINT(0, "unwind.%s: bad unwind info: resetting info->pt\n", __FUNCTION__);
+		UNW_DPRINT(0, "unwind.%s: bad unwind info: resetting info->pt\n", __func__);
 		if (info->flags & UNW_FLAG_INTERRUPT_FRAME)
 			info->pt = (unsigned long) ((struct pt_regs *) info->psp - 1);
 		else
 			info->pt = info->sp - 16;
 	}
-	UNW_DPRINT(3, "unwind.%s: sp 0x%lx pt 0x%lx\n", __FUNCTION__, info->sp, info->pt);
+	UNW_DPRINT(3, "unwind.%s: sp 0x%lx pt 0x%lx\n", __func__, info->sp, info->pt);
 	return (struct pt_regs *) info->pt;
 }
 
@@ -294,7 +294,7 @@ unw_access_gr (struct unw_frame_info *info, int regnum, unsigned long *val, char
 			return 0;
 		}
 		UNW_DPRINT(0, "unwind.%s: trying to access non-existent r%u\n",
-			   __FUNCTION__, regnum);
+			   __func__, regnum);
 		return -1;
 	}
 
@@ -341,7 +341,7 @@ unw_access_gr (struct unw_frame_info *info, int regnum, unsigned long *val, char
 					{
 						UNW_DPRINT(0, "unwind.%s: %p outside of regstk "
 							"[0x%lx-0x%lx)\n",
-							__FUNCTION__, (void *) addr,
+							__func__, (void *) addr,
 							info->regstk.limit,
 							info->regstk.top);
 						return -1;
@@ -374,7 +374,7 @@ unw_access_gr (struct unw_frame_info *info, int regnum, unsigned long *val, char
 		    || (unsigned long) addr >= info->regstk.top)
 		{
 			UNW_DPRINT(0, "unwind.%s: ignoring attempt to access register outside "
-				   "of rbs\n",  __FUNCTION__);
+				   "of rbs\n",  __func__);
 			return -1;
 		}
 		if ((unsigned long) nat_addr >= info->regstk.top)
@@ -385,7 +385,7 @@ unw_access_gr (struct unw_frame_info *info, int regnum, unsigned long *val, char
 	if (write) {
 		if (read_only(addr)) {
 			UNW_DPRINT(0, "unwind.%s: ignoring attempt to write read-only location\n",
-				__FUNCTION__);
+				__func__);
 		} else {
 			*addr = *val;
 			if (*nat)
@@ -427,13 +427,13 @@ unw_access_br (struct unw_frame_info *info, int regnum, unsigned long *val, int
 
 	      default:
 		UNW_DPRINT(0, "unwind.%s: trying to access non-existent b%u\n",
-			   __FUNCTION__, regnum);
+			   __func__, regnum);
 		return -1;
 	}
 	if (write)
 		if (read_only(addr)) {
 			UNW_DPRINT(0, "unwind.%s: ignoring attempt to write read-only location\n",
-				__FUNCTION__);
+				__func__);
 		} else
 			*addr = *val;
 	else
@@ -450,7 +450,7 @@ unw_access_fr (struct unw_frame_info *info, int regnum, struct ia64_fpreg *val,
 
 	if ((unsigned) (regnum - 2) >= 126) {
 		UNW_DPRINT(0, "unwind.%s: trying to access non-existent f%u\n",
-			   __FUNCTION__, regnum);
+			   __func__, regnum);
 		return -1;
 	}
 
@@ -482,7 +482,7 @@ unw_access_fr (struct unw_frame_info *info, int regnum, struct ia64_fpreg *val,
 	if (write)
 		if (read_only(addr)) {
 			UNW_DPRINT(0, "unwind.%s: ignoring attempt to write read-only location\n",
-				__FUNCTION__);
+				__func__);
 		} else
 			*addr = *val;
 	else
@@ -572,14 +572,14 @@ unw_access_ar (struct unw_frame_info *info, int regnum, unsigned long *val, int
 
 	      default:
 		UNW_DPRINT(0, "unwind.%s: trying to access non-existent ar%u\n",
-			   __FUNCTION__, regnum);
+			   __func__, regnum);
 		return -1;
 	}
 
 	if (write) {
 		if (read_only(addr)) {
 			UNW_DPRINT(0, "unwind.%s: ignoring attempt to write read-only location\n",
-				__FUNCTION__);
+				__func__);
 		} else
 			*addr = *val;
 	} else
@@ -600,7 +600,7 @@ unw_access_pr (struct unw_frame_info *info, unsigned long *val, int write)
 	if (write) {
 		if (read_only(addr)) {
 			UNW_DPRINT(0, "unwind.%s: ignoring attempt to write read-only location\n",
-				__FUNCTION__);
+				__func__);
 		} else
 			*addr = *val;
 	} else
@@ -699,7 +699,7 @@ decode_abreg (unsigned char abreg, int memory)
 	      default:
 		break;
 	}
-	UNW_DPRINT(0, "unwind.%s: bad abreg=0x%x\n", __FUNCTION__, abreg);
+	UNW_DPRINT(0, "unwind.%s: bad abreg=0x%x\n", __func__, abreg);
 	return UNW_REG_LC;
 }
 
@@ -739,7 +739,7 @@ spill_next_when (struct unw_reg_info **regp, struct unw_reg_info *lim, unw_word
 			return;
 		}
 	}
-	UNW_DPRINT(0, "unwind.%s: excess spill!\n",  __FUNCTION__);
+	UNW_DPRINT(0, "unwind.%s: excess spill!\n",  __func__);
 }
 
 static inline void
@@ -855,11 +855,11 @@ desc_abi (unsigned char abi, unsigned char context, struct unw_state_record *sr)
 {
 	if (abi == 3 && context == 'i') {
 		sr->flags |= UNW_FLAG_INTERRUPT_FRAME;
-		UNW_DPRINT(3, "unwind.%s: interrupt frame\n",  __FUNCTION__);
+		UNW_DPRINT(3, "unwind.%s: interrupt frame\n",  __func__);
 	}
 	else
 		UNW_DPRINT(0, "unwind%s: ignoring unwabi(abi=0x%x,context=0x%x)\n",
-				__FUNCTION__, abi, context);
+				__func__, abi, context);
 }
 
 static inline void
@@ -1347,7 +1347,7 @@ script_emit (struct unw_script *script, struct unw_insn insn)
 {
 	if (script->count >= UNW_MAX_SCRIPT_LEN) {
 		UNW_DPRINT(0, "unwind.%s: script exceeds maximum size of %u instructions!\n",
-			__FUNCTION__, UNW_MAX_SCRIPT_LEN);
+			__func__, UNW_MAX_SCRIPT_LEN);
 		return;
 	}
 	script->insn[script->count++] = insn;
@@ -1389,7 +1389,7 @@ emit_nat_info (struct unw_state_record *sr, int i, struct unw_script *script)
 
 	      default:
 		UNW_DPRINT(0, "unwind.%s: don't know how to emit nat info for where = %u\n",
-			   __FUNCTION__, r->where);
+			   __func__, r->where);
 		return;
 	}
 	insn.opc = opc;
@@ -1446,7 +1446,7 @@ compile_reg (struct unw_state_record *sr, int i, struct unw_script *script)
 				val = offsetof(struct pt_regs, f6) + 16*(rval - 6);
 			else
 				UNW_DPRINT(0, "unwind.%s: kernel may not touch f%lu\n",
-					   __FUNCTION__, rval);
+					   __func__, rval);
 		}
 		break;
 
@@ -1474,7 +1474,7 @@ compile_reg (struct unw_state_record *sr, int i, struct unw_script *script)
 
 	      default:
 		UNW_DPRINT(0, "unwind%s: register %u has unexpected `where' value of %u\n",
-			   __FUNCTION__, i, r->where);
+			   __func__, i, r->where);
 		break;
 	}
 	insn.opc = opc;
@@ -1547,10 +1547,10 @@ build_script (struct unw_frame_info *info)
 		r->when = UNW_WHEN_NEVER;
 	sr.pr_val = info->pr;
 
-	UNW_DPRINT(3, "unwind.%s: ip 0x%lx\n", __FUNCTION__, ip);
+	UNW_DPRINT(3, "unwind.%s: ip 0x%lx\n", __func__, ip);
 	script = script_new(ip);
 	if (!script) {
-		UNW_DPRINT(0, "unwind.%s: failed to create unwind script\n",  __FUNCTION__);
+		UNW_DPRINT(0, "unwind.%s: failed to create unwind script\n",  __func__);
 		STAT(unw.stat.script.build_time += ia64_get_itc() - start);
 		return NULL;
 	}
@@ -1569,7 +1569,7 @@ build_script (struct unw_frame_info *info)
 	if (!e) {
 		/* no info, return default unwinder (leaf proc, no mem stack, no saved regs)  */
 		UNW_DPRINT(1, "unwind.%s: no unwind info for ip=0x%lx (prev ip=0x%lx)\n",
-			__FUNCTION__, ip, unw.cache[info->prev_script].ip);
+			__func__, ip, unw.cache[info->prev_script].ip);
 		sr.curr.reg[UNW_REG_RP].where = UNW_WHERE_BR;
 		sr.curr.reg[UNW_REG_RP].when = -1;
 		sr.curr.reg[UNW_REG_RP].val = 0;
@@ -1618,13 +1618,13 @@ build_script (struct unw_frame_info *info)
 		sr.curr.reg[UNW_REG_RP].when = -1;
 		sr.curr.reg[UNW_REG_RP].val = sr.return_link_reg;
 		UNW_DPRINT(1, "unwind.%s: using default for rp at ip=0x%lx where=%d val=0x%lx\n",
-			   __FUNCTION__, ip, sr.curr.reg[UNW_REG_RP].where,
+			   __func__, ip, sr.curr.reg[UNW_REG_RP].where,
 			   sr.curr.reg[UNW_REG_RP].val);
 	}
 
 #ifdef UNW_DEBUG
 	UNW_DPRINT(1, "unwind.%s: state record for func 0x%lx, t=%u:\n",
-		__FUNCTION__, table->segment_base + e->start_offset, sr.when_target);
+		__func__, table->segment_base + e->start_offset, sr.when_target);
 	for (r = sr.curr.reg; r < sr.curr.reg + UNW_NUM_REGS; ++r) {
 		if (r->where != UNW_WHERE_NONE || r->when != UNW_WHEN_NEVER) {
 			UNW_DPRINT(1, "  %s <- ", unw.preg_name[r - sr.curr.reg]);
@@ -1746,7 +1746,7 @@ run_script (struct unw_script *script, struct unw_frame_info *state)
 			} else {
 				s[dst] = 0;
 				UNW_DPRINT(0, "unwind.%s: no state->pt, dst=%ld, val=%ld\n",
-					   __FUNCTION__, dst, val);
+					   __func__, dst, val);
 			}
 			break;
 
@@ -1756,7 +1756,7 @@ run_script (struct unw_script *script, struct unw_frame_info *state)
 			else {
 				s[dst] = 0;
 				UNW_DPRINT(0, "unwind.%s: UNW_INSN_MOVE_CONST bad val=%ld\n",
-					   __FUNCTION__, val);
+					   __func__, val);
 			}
 			break;
 
@@ -1791,7 +1791,7 @@ run_script (struct unw_script *script, struct unw_frame_info *state)
 			    || s[val] < TASK_SIZE)
 			{
 				UNW_DPRINT(0, "unwind.%s: rejecting bad psp=0x%lx\n",
-					   __FUNCTION__, s[val]);
+					   __func__, s[val]);
 				break;
 			}
 #endif
@@ -1825,7 +1825,7 @@ find_save_locs (struct unw_frame_info *info)
 	if ((info->ip & (local_cpu_data->unimpl_va_mask | 0xf)) || info->ip < TASK_SIZE) {
 		/* don't let obviously bad addresses pollute the cache */
 		/* FIXME: should really be level 0 but it occurs too often. KAO */
-		UNW_DPRINT(1, "unwind.%s: rejecting bad ip=0x%lx\n", __FUNCTION__, info->ip);
+		UNW_DPRINT(1, "unwind.%s: rejecting bad ip=0x%lx\n", __func__, info->ip);
 		info->rp_loc = NULL;
 		return -1;
 	}
@@ -1838,7 +1838,7 @@ find_save_locs (struct unw_frame_info *info)
 			spin_unlock_irqrestore(&unw.lock, flags);
 			UNW_DPRINT(0,
 				   "unwind.%s: failed to locate/build unwind script for ip %lx\n",
-				   __FUNCTION__, info->ip);
+				   __func__, info->ip);
 			return -1;
 		}
 		have_write_lock = 1;
@@ -1882,21 +1882,21 @@ unw_unwind (struct unw_frame_info *info)
 	if (!unw_valid(info, info->rp_loc)) {
 		/* FIXME: should really be level 0 but it occurs too often. KAO */
 		UNW_DPRINT(1, "unwind.%s: failed to locate return link (ip=0x%lx)!\n",
-			   __FUNCTION__, info->ip);
+			   __func__, info->ip);
 		STAT(unw.stat.api.unwind_time += ia64_get_itc() - start; local_irq_restore(flags));
 		return -1;
 	}
 	/* restore the ip */
 	ip = info->ip = *info->rp_loc;
 	if (ip < GATE_ADDR) {
-		UNW_DPRINT(2, "unwind.%s: reached user-space (ip=0x%lx)\n", __FUNCTION__, ip);
+		UNW_DPRINT(2, "unwind.%s: reached user-space (ip=0x%lx)\n", __func__, ip);
 		STAT(unw.stat.api.unwind_time += ia64_get_itc() - start; local_irq_restore(flags));
 		return -1;
 	}
 
 	/* validate the previous stack frame pointer */
 	if (!unw_valid(info, info->pfs_loc)) {
-		UNW_DPRINT(0, "unwind.%s: failed to locate ar.pfs!\n", __FUNCTION__);
+		UNW_DPRINT(0, "unwind.%s: failed to locate ar.pfs!\n", __func__);
 		STAT(unw.stat.api.unwind_time += ia64_get_itc() - start; local_irq_restore(flags));
 		return -1;
 	}
@@ -1912,13 +1912,13 @@ unw_unwind (struct unw_frame_info *info)
 			num_regs = *info->cfm_loc & 0x7f;		/* size of frame */
 		info->pfs_loc =
 			(unsigned long *) (info->pt + offsetof(struct pt_regs, ar_pfs));
-		UNW_DPRINT(3, "unwind.%s: interrupt_frame pt 0x%lx\n", __FUNCTION__, info->pt);
+		UNW_DPRINT(3, "unwind.%s: interrupt_frame pt 0x%lx\n", __func__, info->pt);
 	} else
 		num_regs = (*info->cfm_loc >> 7) & 0x7f;	/* size of locals */
 	info->bsp = (unsigned long) ia64_rse_skip_regs((unsigned long *) info->bsp, -num_regs);
 	if (info->bsp < info->regstk.limit || info->bsp > info->regstk.top) {
 		UNW_DPRINT(0, "unwind.%s: bsp (0x%lx) out of range [0x%lx-0x%lx]\n",
-			__FUNCTION__, info->bsp, info->regstk.limit, info->regstk.top);
+			__func__, info->bsp, info->regstk.limit, info->regstk.top);
 		STAT(unw.stat.api.unwind_time += ia64_get_itc() - start; local_irq_restore(flags));
 		return -1;
 	}
@@ -1927,14 +1927,14 @@ unw_unwind (struct unw_frame_info *info)
 	info->sp = info->psp;
 	if (info->sp < info->memstk.top || info->sp > info->memstk.limit) {
 		UNW_DPRINT(0, "unwind.%s: sp (0x%lx) out of range [0x%lx-0x%lx]\n",
-			__FUNCTION__, info->sp, info->memstk.top, info->memstk.limit);
+			__func__, info->sp, info->memstk.top, info->memstk.limit);
 		STAT(unw.stat.api.unwind_time += ia64_get_itc() - start; local_irq_restore(flags));
 		return -1;
 	}
 
 	if (info->ip == prev_ip && info->sp == prev_sp && info->bsp == prev_bsp) {
 		UNW_DPRINT(0, "unwind.%s: ip, sp, bsp unchanged; stopping here (ip=0x%lx)\n",
-			   __FUNCTION__, ip);
+			   __func__, ip);
 		STAT(unw.stat.api.unwind_time += ia64_get_itc() - start; local_irq_restore(flags));
 		return -1;
 	}
@@ -1961,7 +1961,7 @@ unw_unwind_to_user (struct unw_frame_info *info)
 		if ((long)((unsigned long)info->task + IA64_STK_OFFSET - sp)
 		    < IA64_PT_REGS_SIZE) {
 			UNW_DPRINT(0, "unwind.%s: ran off the top of the kernel stack\n",
-				   __FUNCTION__);
+				   __func__);
 			break;
 		}
 		if (unw_is_intr_frame(info) &&
@@ -1971,13 +1971,13 @@ unw_unwind_to_user (struct unw_frame_info *info)
 			unw_get_rp(info, &ip);
 			UNW_DPRINT(0, "unwind.%s: failed to read "
 				   "predicate register (ip=0x%lx)\n",
-				__FUNCTION__, ip);
+				__func__, ip);
 			return -1;
 		}
 	} while (unw_unwind(info) >= 0);
 	unw_get_ip(info, &ip);
 	UNW_DPRINT(0, "unwind.%s: failed to unwind to user-level (ip=0x%lx)\n",
-		   __FUNCTION__, ip);
+		   __func__, ip);
 	return -1;
 }
 EXPORT_SYMBOL(unw_unwind_to_user);
@@ -2028,7 +2028,7 @@ init_frame_info (struct unw_frame_info *info, struct task_struct *t,
 		   "  pr     0x%lx\n"
 		   "  sw     0x%lx\n"
 		   "  sp     0x%lx\n",
-		   __FUNCTION__, (unsigned long) t, rbslimit, rbstop, stktop, stklimit,
+		   __func__, (unsigned long) t, rbslimit, rbstop, stktop, stklimit,
 		   info->pr, (unsigned long) info->sw, info->sp);
 	STAT(unw.stat.api.init_time += ia64_get_itc() - start; local_irq_restore(flags));
 }
@@ -2047,7 +2047,7 @@ unw_init_frame_info (struct unw_frame_info *info, struct task_struct *t, struct
 		   "  bsp    0x%lx\n"
 		   "  sol    0x%lx\n"
 		   "  ip     0x%lx\n",
-		   __FUNCTION__, info->bsp, sol, info->ip);
+		   __func__, info->bsp, sol, info->ip);
 	find_save_locs(info);
 }
 
@@ -2058,7 +2058,7 @@ unw_init_from_blocked_task (struct unw_frame_info *info, struct task_struct *t)
 {
 	struct switch_stack *sw = (struct switch_stack *) (t->thread.ksp + 16);
 
-	UNW_DPRINT(1, "unwind.%s\n", __FUNCTION__);
+	UNW_DPRINT(1, "unwind.%s\n", __func__);
 	unw_init_frame_info(info, t, sw);
 }
 EXPORT_SYMBOL(unw_init_from_blocked_task);
@@ -2088,7 +2088,7 @@ unw_add_unwind_table (const char *name, unsigned long segment_base, unsigned lon
 
 	if (end - start <= 0) {
 		UNW_DPRINT(0, "unwind.%s: ignoring attempt to insert empty unwind table\n",
-			   __FUNCTION__);
+			   __func__);
 		return NULL;
 	}
 
@@ -2119,14 +2119,14 @@ unw_remove_unwind_table (void *handle)
 
 	if (!handle) {
 		UNW_DPRINT(0, "unwind.%s: ignoring attempt to remove non-existent unwind table\n",
-			   __FUNCTION__);
+			   __func__);
 		return;
 	}
 
 	table = handle;
 	if (table == &unw.kernel_table) {
 		UNW_DPRINT(0, "unwind.%s: sorry, freeing the kernel's unwind table is a "
-			   "no-can-do!\n", __FUNCTION__);
+			   "no-can-do!\n", __func__);
 		return;
 	}
 
@@ -2139,7 +2139,7 @@ unw_remove_unwind_table (void *handle)
 				break;
 		if (!prev) {
 			UNW_DPRINT(0, "unwind.%s: failed to find unwind table %p\n",
-				   __FUNCTION__, (void *) table);
+				   __func__, (void *) table);
 			spin_unlock_irqrestore(&unw.lock, flags);
 			return;
 		}
@@ -2185,7 +2185,7 @@ create_gate_table (void)
 		}
 
 	if (!punw) {
-		printk("%s: failed to find gate DSO's unwind table!\n", __FUNCTION__);
+		printk("%s: failed to find gate DSO's unwind table!\n", __func__);
 		return 0;
 	}
 
@@ -2202,7 +2202,7 @@ create_gate_table (void)
 	unw.gate_table = kmalloc(size, GFP_KERNEL);
 	if (!unw.gate_table) {
 		unw.gate_table_size = 0;
-		printk(KERN_ERR "%s: unable to create unwind data for gate page!\n", __FUNCTION__);
+		printk(KERN_ERR "%s: unable to create unwind data for gate page!\n", __func__);
 		return 0;
 	}
 	unw.gate_table_size = size;

arch/ia64/mm/fault.c

@@ -26,7 +26,7 @@ static inline int notify_page_fault(struct pt_regs *regs, int trap)
 	if (!user_mode(regs)) {
 		/* kprobe_running() needs smp_processor_id() */
 		preempt_disable();
-		if (kprobe_running() && kprobes_fault_handler(regs, trap))
+		if (kprobe_running() && kprobe_fault_handler(regs, trap))
 			ret = 1;
 		preempt_enable();
 	}

arch/ia64/mm/init.c

@@ -714,7 +714,7 @@ int arch_add_memory(int nid, u64 start, u64 size)
 
 	if (ret)
 		printk("%s: Problem encountered in __add_pages() as ret=%d\n",
-		       __FUNCTION__,  ret);
+		       __func__,  ret);
 
 	return ret;
 }

arch/ia64/pci/fixup.c

@@ -63,7 +63,7 @@ static void __devinit pci_fixup_video(struct pci_dev *pdev)
 	pci_read_config_word(pdev, PCI_COMMAND, &config);
 	if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
 		pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW;
-		printk(KERN_DEBUG "Boot video device is %s\n", pci_name(pdev));
+		dev_printk(KERN_DEBUG, &pdev->dev, "Boot video device\n");
 	}
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_video);

arch/ia64/pci/pci.c

@@ -765,7 +765,7 @@ static void __init set_pci_cacheline_size(void)
 	status = ia64_pal_cache_summary(&levels, &unique_caches);
 	if (status != 0) {
 		printk(KERN_ERR "%s: ia64_pal_cache_summary() failed "
-			"(status=%ld)\n", __FUNCTION__, status);
+			"(status=%ld)\n", __func__, status);
 		return;
 	}
 
@@ -773,7 +773,7 @@ static void __init set_pci_cacheline_size(void)
 				/* cache_type (data_or_unified)= */ 2, &cci);
 	if (status != 0) {
 		printk(KERN_ERR "%s: ia64_pal_cache_config_info() failed "
-			"(status=%ld)\n", __FUNCTION__, status);
+			"(status=%ld)\n", __func__, status);
 		return;
 	}
 	pci_cache_line_size = (1 << cci.pcci_line_size) / 4;

arch/ia64/sn/kernel/huberror.c

@@ -37,7 +37,7 @@ static irqreturn_t hub_eint_handler(int irq, void *arg)
 			(u64) nasid, 0, 0, 0, 0, 0, 0);
 
 		if ((int)ret_stuff.v0)
-			panic("%s: Fatal %s Error", __FUNCTION__,
+			panic("%s: Fatal %s Error", __func__,
 				((nasid & 1) ? "TIO" : "HUBII"));
 
 		if (!(nasid & 1)) /* Not a TIO, handle CRB errors */
@@ -48,7 +48,7 @@ static irqreturn_t hub_eint_handler(int irq, void *arg)
 				(u64) nasid, 0, 0, 0, 0, 0, 0);
 
 			if ((int)ret_stuff.v0)
-				panic("%s: Fatal TIO Error", __FUNCTION__);
+				panic("%s: Fatal TIO Error", __func__);
 		} else
 			bte_error_handler((unsigned long)NODEPDA(nasid_to_cnodeid(nasid)));
 

arch/ia64/sn/kernel/io_acpi_init.c

@@ -133,7 +133,7 @@ sn_get_bussoft_ptr(struct pci_bus *bus)
 	if (ACPI_FAILURE(status)) {
 		printk(KERN_ERR "%s: "
 		       "acpi_get_vendor_resource() failed (0x%x) for: ",
-		       __FUNCTION__, status);
+		       __func__, status);
 		acpi_ns_print_node_pathname(handle, NULL);
 		printk("\n");
 		return NULL;
@@ -145,7 +145,7 @@ sn_get_bussoft_ptr(struct pci_bus *bus)
 	     sizeof(struct pcibus_bussoft *)) {
 		printk(KERN_ERR
 		       "%s: Invalid vendor data length %d\n",
-			__FUNCTION__, vendor->byte_length);
+			__func__, vendor->byte_length);
 		kfree(buffer.pointer);
 		return NULL;
 	}
@@ -184,7 +184,7 @@ sn_extract_device_info(acpi_handle handle, struct pcidev_info **pcidev_info,
 	if (ACPI_FAILURE(status)) {
 		printk(KERN_ERR
 		       "%s: acpi_get_vendor_resource() failed (0x%x) for: ",
-		        __FUNCTION__, status);
+		        __func__, status);
 		acpi_ns_print_node_pathname(handle, NULL);
 		printk("\n");
 		return 1;
@@ -196,7 +196,7 @@ sn_extract_device_info(acpi_handle handle, struct pcidev_info **pcidev_info,
 	    sizeof(struct pci_devdev_info *)) {
 		printk(KERN_ERR
 		       "%s: Invalid vendor data length: %d for: ",
-		        __FUNCTION__, vendor->byte_length);
+		        __func__, vendor->byte_length);
 		acpi_ns_print_node_pathname(handle, NULL);
 		printk("\n");
 		ret = 1;
@@ -205,7 +205,7 @@ sn_extract_device_info(acpi_handle handle, struct pcidev_info **pcidev_info,
 
 	pcidev_ptr = kzalloc(sizeof(struct pcidev_info), GFP_KERNEL);
 	if (!pcidev_ptr)
-		panic("%s: Unable to alloc memory for pcidev_info", __FUNCTION__);
+		panic("%s: Unable to alloc memory for pcidev_info", __func__);
 
 	memcpy(&addr, vendor->byte_data, sizeof(struct pcidev_info *));
 	pcidev_prom_ptr = __va(addr);
@@ -214,7 +214,7 @@ sn_extract_device_info(acpi_handle handle, struct pcidev_info **pcidev_info,
 	/* Get the IRQ info */
 	irq_info = kzalloc(sizeof(struct sn_irq_info), GFP_KERNEL);
 	if (!irq_info)
-		 panic("%s: Unable to alloc memory for sn_irq_info", __FUNCTION__);
+		 panic("%s: Unable to alloc memory for sn_irq_info", __func__);
 
 	if (pcidev_ptr->pdi_sn_irq_info) {
 		irq_info_prom = __va(pcidev_ptr->pdi_sn_irq_info);
@@ -249,10 +249,10 @@ get_host_devfn(acpi_handle device_handle, acpi_handle rootbus_handle)
 		status = acpi_get_parent(child, &parent);
 		if (ACPI_FAILURE(status)) {
 			printk(KERN_ERR "%s: acpi_get_parent() failed "
-			       "(0x%x) for: ", __FUNCTION__, status);
+			       "(0x%x) for: ", __func__, status);
 			acpi_ns_print_node_pathname(child, NULL);
 			printk("\n");
-			panic("%s: Unable to find host devfn\n", __FUNCTION__);
+			panic("%s: Unable to find host devfn\n", __func__);
 		}
 		if (parent == rootbus_handle)
 			break;
@@ -260,7 +260,7 @@ get_host_devfn(acpi_handle device_handle, acpi_handle rootbus_handle)
 	}
 	if (!child) {
 		printk(KERN_ERR "%s: Unable to find root bus for: ",
-		       __FUNCTION__);
+		       __func__);
 		acpi_ns_print_node_pathname(device_handle, NULL);
 		printk("\n");
 		BUG();
@@ -269,10 +269,10 @@ get_host_devfn(acpi_handle device_handle, acpi_handle rootbus_handle)
 	status = acpi_evaluate_integer(child, METHOD_NAME__ADR, NULL, &adr);
 	if (ACPI_FAILURE(status)) {
 		printk(KERN_ERR "%s: Unable to get _ADR (0x%x) for: ",
-		       __FUNCTION__, status);
+		       __func__, status);
 		acpi_ns_print_node_pathname(child, NULL);
 		printk("\n");
-		panic("%s: Unable to find host devfn\n", __FUNCTION__);
+		panic("%s: Unable to find host devfn\n", __func__);
 	}
 
 	slot = (adr >> 16) & 0xffff;
@@ -308,7 +308,7 @@ find_matching_device(acpi_handle handle, u32 lvl, void *context, void **rv)
 		if (ACPI_FAILURE(status)) {
 			printk(KERN_ERR
 			       "%s: acpi_get_parent() failed (0x%x) for: ",
-					__FUNCTION__, status);
+					__func__, status);
 			acpi_ns_print_node_pathname(handle, NULL);
 			printk("\n");
 			return AE_OK;
@@ -318,7 +318,7 @@ find_matching_device(acpi_handle handle, u32 lvl, void *context, void **rv)
 		if (ACPI_FAILURE(status)) {
 			printk(KERN_ERR
 			  "%s: Failed to find _BBN in parent of: ",
-					__FUNCTION__);
+					__func__);
 			acpi_ns_print_node_pathname(handle, NULL);
 			printk("\n");
 			return AE_OK;
@@ -358,14 +358,14 @@ sn_acpi_get_pcidev_info(struct pci_dev *dev, struct pcidev_info **pcidev_info,
 		if (segment != pci_domain_nr(dev)) {
 			printk(KERN_ERR
 			       "%s: Segment number mismatch, 0x%lx vs 0x%x for: ",
-			       __FUNCTION__, segment, pci_domain_nr(dev));
+			       __func__, segment, pci_domain_nr(dev));
 			acpi_ns_print_node_pathname(rootbus_handle, NULL);
 			printk("\n");
 			return 1;
 		}
 	} else {
 		printk(KERN_ERR "%s: Unable to get __SEG from: ",
-		       __FUNCTION__);
+		       __func__);
 		acpi_ns_print_node_pathname(rootbus_handle, NULL);
 		printk("\n");
 		return 1;
@@ -386,7 +386,7 @@ sn_acpi_get_pcidev_info(struct pci_dev *dev, struct pcidev_info **pcidev_info,
 	if (!pcidev_match.handle) {
 		printk(KERN_ERR
 		       "%s: Could not find matching ACPI device for %s.\n",
-		       __FUNCTION__, pci_name(dev));
+		       __func__, pci_name(dev));
 		return 1;
 	}
 
@@ -422,7 +422,7 @@ sn_acpi_slot_fixup(struct pci_dev *dev)
 
 	if (sn_acpi_get_pcidev_info(dev, &pcidev_info, &sn_irq_info)) {
 		panic("%s:  Failure obtaining pcidev_info for %s\n",
-		      __FUNCTION__, pci_name(dev));
+		      __func__, pci_name(dev));
 	}
 
 	if (pcidev_info->pdi_pio_mapped_addr[PCI_ROM_RESOURCE]) {
@@ -463,7 +463,7 @@ sn_acpi_bus_fixup(struct pci_bus *bus)
 			printk(KERN_ERR
 			       "%s: 0x%04x:0x%02x Unable to "
 			       "obtain prom_bussoft_ptr\n",
-			       __FUNCTION__, pci_domain_nr(bus), bus->number);
+			       __func__, pci_domain_nr(bus), bus->number);
 			return;
 		}
 		sn_common_bus_fixup(bus, prom_bussoft_ptr);

arch/ia64/sn/kernel/io_common.c

@@ -364,7 +364,7 @@ void sn_bus_store_sysdata(struct pci_dev *dev)
 
 	element = kzalloc(sizeof(struct sysdata_el), GFP_KERNEL);
 	if (!element) {
-		dev_dbg(&dev->dev, "%s: out of memory!\n", __FUNCTION__);
+		dev_dbg(&dev->dev, "%s: out of memory!\n", __func__);
 		return;
 	}
 	element->sysdata = SN_PCIDEV_INFO(dev);

arch/ia64/sn/kernel/io_init.c

@@ -209,11 +209,11 @@ sn_io_slot_fixup(struct pci_dev *dev)
 
 	pcidev_info = kzalloc(sizeof(struct pcidev_info), GFP_KERNEL);
 	if (!pcidev_info)
-		panic("%s: Unable to alloc memory for pcidev_info", __FUNCTION__);
+		panic("%s: Unable to alloc memory for pcidev_info", __func__);
 
 	sn_irq_info = kzalloc(sizeof(struct sn_irq_info), GFP_KERNEL);
 	if (!sn_irq_info)
-		panic("%s: Unable to alloc memory for sn_irq_info", __FUNCTION__);
+		panic("%s: Unable to alloc memory for sn_irq_info", __func__);
 
 	/* Call to retrieve pci device information needed by kernel. */
 	status = sal_get_pcidev_info((u64) pci_domain_nr(dev),

arch/ia64/sn/kernel/mca.c

@@ -100,7 +100,7 @@ sn_platform_plat_specific_err_print(const u8 * sect_header, u8 ** oemdata,
 		if (!newbuf) {
 			mutex_unlock(&sn_oemdata_mutex);
 			printk(KERN_ERR "%s: unable to extend sn_oemdata\n",
-			       __FUNCTION__);
+			       __func__);
 			return 1;
 		}
 		vfree(*sn_oemdata);

arch/ia64/sn/pci/pci_dma.c

@@ -116,7 +116,7 @@ void *sn_dma_alloc_coherent(struct device *dev, size_t size,
 	*dma_handle = provider->dma_map_consistent(pdev, phys_addr, size,
 						   SN_DMA_ADDR_PHYS);
 	if (!*dma_handle) {
-		printk(KERN_ERR "%s: out of ATEs\n", __FUNCTION__);
+		printk(KERN_ERR "%s: out of ATEs\n", __func__);
 		free_pages((unsigned long)cpuaddr, get_order(size));
 		return NULL;
 	}
@@ -179,7 +179,7 @@ dma_addr_t sn_dma_map_single(struct device *dev, void *cpu_addr, size_t size,
 	phys_addr = __pa(cpu_addr);
 	dma_addr = provider->dma_map(pdev, phys_addr, size, SN_DMA_ADDR_PHYS);
 	if (!dma_addr) {
-		printk(KERN_ERR "%s: out of ATEs\n", __FUNCTION__);
+		printk(KERN_ERR "%s: out of ATEs\n", __func__);
 		return 0;
 	}
 	return dma_addr;
@@ -266,7 +266,7 @@ int sn_dma_map_sg(struct device *dev, struct scatterlist *sgl, int nhwentries,
 						    SN_DMA_ADDR_PHYS);
 
 		if (!sg->dma_address) {
-			printk(KERN_ERR "%s: out of ATEs\n", __FUNCTION__);
+			printk(KERN_ERR "%s: out of ATEs\n", __func__);
 
 			/*
 			 * Free any successfully allocated entries.

arch/ia64/sn/pci/tioca_provider.c

@@ -88,7 +88,7 @@ tioca_gart_init(struct tioca_kernel *tioca_kern)
 		break;
 	default:
 		printk(KERN_ERR "%s:  Invalid CA_APERATURE_SIZE "
-		       "0x%lx\n", __FUNCTION__, (ulong) CA_APERATURE_SIZE);
+		       "0x%lx\n", __func__, (ulong) CA_APERATURE_SIZE);
 		return -1;
 	}
 
@@ -124,7 +124,7 @@ tioca_gart_init(struct tioca_kernel *tioca_kern)
 	if (!tmp) {
 		printk(KERN_ERR "%s:  Could not allocate "
 		       "%lu bytes (order %d) for GART\n",
-		       __FUNCTION__,
+		       __func__,
 		       tioca_kern->ca_gart_size,
 		       get_order(tioca_kern->ca_gart_size));
 		return -ENOMEM;
@@ -341,7 +341,7 @@ tioca_dma_d48(struct pci_dev *pdev, u64 paddr)
 
 	if (node_upper > 64) {
 		printk(KERN_ERR "%s:  coretalk addr 0x%p node id out "
-		       "of range\n", __FUNCTION__, (void *)ct_addr);
+		       "of range\n", __func__, (void *)ct_addr);
 		return 0;
 	}
 
@@ -349,7 +349,7 @@ tioca_dma_d48(struct pci_dev *pdev, u64 paddr)
 	if (node_upper != (agp_dma_extn >> CA_AGP_DMA_NODE_ID_SHFT)) {
 		printk(KERN_ERR "%s:  coretalk upper node (%u) "
 		       "mismatch with ca_agp_dma_addr_extn (%lu)\n",
-		       __FUNCTION__,
+		       __func__,
 		       node_upper, (agp_dma_extn >> CA_AGP_DMA_NODE_ID_SHFT));
 		return 0;
 	}
@@ -597,7 +597,7 @@ tioca_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont
 	if (is_shub1() && sn_sal_rev() < 0x0406) {
 		printk
 		    (KERN_ERR "%s:  SGI prom rev 4.06 or greater required "
-		     "for tioca support\n", __FUNCTION__);
+		     "for tioca support\n", __func__);
 		return NULL;
 	}
 
@@ -651,7 +651,7 @@ tioca_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont
 		printk(KERN_WARNING
 		       "%s:  Unable to get irq %d.  "
 		       "Error interrupts won't be routed for TIOCA bus %d\n",
-		       __FUNCTION__, SGI_TIOCA_ERROR,
+		       __func__, SGI_TIOCA_ERROR,
 		       (int)tioca_common->ca_common.bs_persist_busnum);
 
 	sn_set_err_irq_affinity(SGI_TIOCA_ERROR);

arch/ia64/sn/pci/tioce_provider.c

@@ -494,7 +494,7 @@ tioce_dma_unmap(struct pci_dev *pdev, dma_addr_t bus_addr, int dir)
 		if (&map->ce_dmamap_list == &ce_kern->ce_dmamap_list) {
 			printk(KERN_WARNING
 			       "%s:  %s - no map found for bus_addr 0x%lx\n",
-			       __FUNCTION__, pci_name(pdev), bus_addr);
+			       __func__, pci_name(pdev), bus_addr);
 		} else if (--map->refcnt == 0) {
 			for (i = 0; i < map->ate_count; i++) {
 				map->ate_shadow[i] = 0;
@@ -1030,7 +1030,7 @@ tioce_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont
 		       "%s:  Unable to get irq %d.  "
 		       "Error interrupts won't be routed for "
 		       "TIOCE bus %04x:%02x\n",
-		       __FUNCTION__, SGI_PCIASIC_ERROR,
+		       __func__, SGI_PCIASIC_ERROR,
 		       tioce_common->ce_pcibus.bs_persist_segment,
 		       tioce_common->ce_pcibus.bs_persist_busnum);
 

arch/m68k/kernel/entry.S

@@ -742,7 +742,9 @@ sys_call_table:
 	.long sys_epoll_pwait		/* 315 */
 	.long sys_utimensat
 	.long sys_signalfd
-	.long sys_ni_syscall
+	.long sys_timerfd_create
 	.long sys_eventfd
 	.long sys_fallocate		/* 320 */
+	.long sys_timerfd_settime
+	.long sys_timerfd_gettime
 

arch/m68knommu/defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Thu Oct 18 13:17:38 2007
+# Linux kernel version: 2.6.25-rc3
+# Mon Feb 25 15:03:00 2008
 #
 CONFIG_M68K=y
 # CONFIG_MMU is not set
@@ -15,8 +15,10 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
 CONFIG_TIME_LOW_RES=y
 CONFIG_NO_IOPORT=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -31,12 +33,14 @@ CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 # CONFIG_SYSFS_DEPRECATED is not set
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -48,15 +52,22 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
 # CONFIG_EPOLL is not set
 # CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+CONFIG_SLABINFO=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
@@ -83,6 +94,8 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PREEMPT_RCU is not set
 
 #
 # Processor type and features
@@ -121,6 +134,7 @@ CONFIG_M5272C3=y
 # CONFIG_MOD5272 is not set
 CONFIG_FREESCALE=y
 CONFIG_4KSTACKS=y
+CONFIG_HZ=100
 
 #
 # RAM configuration
@@ -147,6 +161,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
@@ -158,10 +173,6 @@ CONFIG_VIRT_TO_BUS=y
 # CONFIG_PCI is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
 #
 # Executable file formats
 #
@@ -205,6 +216,7 @@ CONFIG_IP_FIB_HASH=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
@@ -229,10 +241,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -240,6 +248,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -283,6 +292,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -339,10 +349,11 @@ CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -360,9 +371,15 @@ CONFIG_NETDEVICES=y
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
 CONFIG_FEC=y
 # CONFIG_FEC2 is not set
 # CONFIG_NETDEV_1000 is not set
@@ -377,7 +394,7 @@ CONFIG_FEC=y
 CONFIG_PPP=y
 # CONFIG_PPP_MULTILINK is not set
 # CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
+CONFIG_PPP_ASYNC=y
 # CONFIG_PPP_SYNC_TTY is not set
 # CONFIG_PPP_DEFLATE is not set
 # CONFIG_PPP_BSDCOMP is not set
@@ -386,7 +403,6 @@ CONFIG_PPP=y
 # CONFIG_PPPOL2TP is not set
 # CONFIG_SLIP is not set
 CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -418,12 +434,16 @@ CONFIG_SLHC=y
 #
 # Non-8250 serial port support
 #
-CONFIG_SERIAL_COLDFIRE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_COLDFIRE is not set
+CONFIG_SERIAL_MCF=y
+CONFIG_SERIAL_MCF_BAUDRATE=19200
+CONFIG_SERIAL_MCF_CONSOLE=y
 # CONFIG_UNIX98_PTYS is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
@@ -439,6 +459,14 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -450,20 +478,20 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
 
 #
 # Sound
@@ -471,22 +499,10 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_RTC_CLASS is not set
 
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
 #
 # Userspace I/O
 #
@@ -505,11 +521,9 @@ CONFIG_EXT2_FS=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -535,7 +549,6 @@ CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -551,42 +564,27 @@ CONFIG_RAMFS=y
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
@@ -594,6 +592,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_FULLDEBUG is not set
 # CONFIG_HIGHPROFILE is not set
 # CONFIG_BOOTPARAM is not set
@@ -605,6 +604,7 @@ CONFIG_MSDOS_PARTITION=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #