ALSA: pxa: slightly refactor reset handling

PXA25x also shows some problems when using interrupts during reset
handling. Thus do not use interrupts on all pxa kinds (to detect codec
ready state). Instead use a common mdelay-loop on all platforms to
detect codecs becoming ready.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

sound/arm/pxa2xx-ac97-lib.c

@@ -117,8 +117,7 @@ static inline void pxa_ac97_warm_pxa25x(void)
 {
 	gsr_bits = 0;
 
-	GCR |= GCR_WARM_RST | GCR_PRIRDY_IEN | GCR_SECRDY_IEN;
-	wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR | GSR_SCR), 1);
+	GCR |= GCR_WARM_RST;
 }
 
 static inline void pxa_ac97_cold_pxa25x(void)
@@ -129,8 +128,6 @@ static inline void pxa_ac97_cold_pxa25x(void)
 	gsr_bits = 0;
 
 	GCR = GCR_COLD_RST;
-	GCR |= GCR_CDONE_IE|GCR_SDONE_IE;
-	wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR | GSR_SCR), 1);
 }
 #endif
 
@@ -149,8 +146,6 @@ static inline void pxa_ac97_warm_pxa27x(void)
 
 static inline void pxa_ac97_cold_pxa27x(void)
 {
-	unsigned int timeout;
-
 	GCR &=  GCR_COLD_RST;  /* clear everything but nCRST */
 	GCR &= ~GCR_COLD_RST;  /* then assert nCRST */
 
@@ -161,29 +156,20 @@ static inline void pxa_ac97_cold_pxa27x(void)
 	udelay(5);
 	clk_disable(ac97conf_clk);
 	GCR = GCR_COLD_RST | GCR_WARM_RST;
-	timeout = 100;     /* wait for the codec-ready bit to be set */
-	while (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)) && timeout--)
-		mdelay(1);
 }
 #endif
 
 #ifdef CONFIG_PXA3xx
 static inline void pxa_ac97_warm_pxa3xx(void)
 {
-	int timeout = 100;
-
 	gsr_bits = 0;
 
 	/* Can't use interrupts */
 	GCR |= GCR_WARM_RST;
-	while (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)) && timeout--)
-		mdelay(1);
 }
 
 static inline void pxa_ac97_cold_pxa3xx(void)
 {
-	int timeout = 1000;
-
 	/* Hold CLKBPB for 100us */
 	GCR = 0;
 	GCR = GCR_CLKBPB;
@@ -199,14 +185,13 @@ static inline void pxa_ac97_cold_pxa3xx(void)
 	GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN);
 
 	GCR = GCR_WARM_RST | GCR_COLD_RST;
-	while (!(GSR & (GSR_PCR | GSR_SCR)) && timeout--)
-		mdelay(10);
 }
 #endif
 
 bool pxa2xx_ac97_try_warm_reset(struct snd_ac97 *ac97)
 {
 	unsigned long gsr;
+	unsigned int timeout = 100;
 
 #ifdef CONFIG_PXA25x
 	if (cpu_is_pxa25x())
@@ -224,6 +209,10 @@ bool pxa2xx_ac97_try_warm_reset(struct snd_ac97 *ac97)
 	else
 #endif
 		BUG();
+
+	while (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)) && timeout--)
+		mdelay(1);
+
 	gsr = GSR | gsr_bits;
 	if (!(gsr & (GSR_PCR | GSR_SCR))) {
 		printk(KERN_INFO "%s: warm reset timeout (GSR=%#lx)\n",
@@ -239,6 +228,7 @@ EXPORT_SYMBOL_GPL(pxa2xx_ac97_try_warm_reset);
 bool pxa2xx_ac97_try_cold_reset(struct snd_ac97 *ac97)
 {
 	unsigned long gsr;
+	unsigned int timeout = 1000;
 
 #ifdef CONFIG_PXA25x
 	if (cpu_is_pxa25x())
@@ -257,6 +247,9 @@ bool pxa2xx_ac97_try_cold_reset(struct snd_ac97 *ac97)
 #endif
 		BUG();
 
+	while (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)) && timeout--)
+		mdelay(1);
+
 	gsr = GSR | gsr_bits;
 	if (!(gsr & (GSR_PCR | GSR_SCR))) {
 		printk(KERN_INFO "%s: cold reset timeout (GSR=%#lx)\n",