Merge ../linux-2.6/

CREDITS

@@ -1624,10 +1624,10 @@ E: ajoshi@shell.unixbox.com
 D: fbdev hacking
 
 N: Jesper Juhl
-E: juhl-lkml@dif.dk
-D: Various small janitor fixes, cleanups etc.
+E: jesper.juhl@gmail.com
+D: Various fixes, cleanups and minor features.
 S: Lemnosvej 1, 3.tv
-S: 2300 Copenhagen S
+S: 2300 Copenhagen S.
 S: Denmark
 
 N: Jozsef Kadlecsik

Documentation/Changes

@@ -65,6 +65,7 @@ o  isdn4k-utils           3.1pre1                 # isdnctrl 2>&1|grep version
 o  nfs-utils              1.0.5                   # showmount --version
 o  procps                 3.2.0                   # ps --version
 o  oprofile               0.9                     # oprofiled --version
+o  udev                   058                     # udevinfo -V
 
 Kernel compilation
 ==================

Documentation/acpi-hotkey.txt

@@ -0,0 +1,35 @@
+driver/acpi/hotkey.c implement:
+1. /proc/acpi/hotkey/event_config 
+(event based hotkey or event config interface):
+a. add a  event based hotkey(event) : 
+echo "0:bus::action:method:num:num" > event_config
+
+b. delete a event based hotkey(event): 
+echo "1:::::num:num" > event_config
+
+c.  modify a event based hotkey(event):    
+echo "2:bus::action:method:num:num" > event_config
+
+2. /proc/acpi/hotkey/poll_config 
+(polling based hotkey or event config interface):
+a.add a polling based hotkey(event) : 	
+echo "0:bus:method:action:method:num" > poll_config
+this adding command will create a proc file 
+/proc/acpi/hotkey/method, which is used to get 
+result of polling.
+
+b.delete a polling based hotkey(event): 	
+echo "1:::::num" > event_config
+
+c.modify a polling based hotkey(event):    
+echo "2:bus:method:action:method:num" > poll_config
+
+3./proc/acpi/hotkey/action 
+(interface to call aml method associated with a 
+specific hotkey(event))
+echo "event_num:event_type:event_argument" > 
+	/proc/acpi/hotkey/action.
+The result of the execution of this aml method is 
+attached to /proc/acpi/hotkey/poll_method, which is dnyamically
+created.  Please use command "cat /proc/acpi/hotkey/polling_method" 
+to retrieve it.

Documentation/dontdiff

@@ -41,6 +41,7 @@ COPYING
 CREDITS
 CVS
 ChangeSet
+Image
 Kerntypes
 MODS.txt
 Module.symvers
@@ -103,6 +104,7 @@ logo_*.c
 logo_*_clut224.c
 logo_*_mono.c
 lxdialog
+mach-types.h
 make_times_h
 map
 maui_boot.h

Documentation/feature-removal-schedule.txt

@@ -103,11 +103,11 @@ Who:	Jody McIntyre <scjody@steamballoon.com>
 ---------------------------
 
 What:	register_serial/unregister_serial
-When:	December 2005
+When:	September 2005
 Why:	This interface does not allow serial ports to be registered against
 	a struct device, and as such does not allow correct power management
 	of such ports.  8250-based ports should use serial8250_register_port
-	and serial8250_unregister_port instead.
+	and serial8250_unregister_port, or platform devices instead.
 Who:	Russell King <rmk@arm.linux.org.uk>
 
 ---------------------------

Documentation/filesystems/inotify.txt

@@ -0,0 +1,151 @@
+				   inotify
+	    a powerful yet simple file change notification system
+
+
+
+Document started 15 Mar 2005 by Robert Love <rml@novell.com>
+
+
+(i) User Interface
+
+Inotify is controlled by a set of three system calls and normal file I/O on a
+returned file descriptor.
+
+First step in using inotify is to initialise an inotify instance:
+
+	int fd = inotify_init ();
+
+Each instance is associated with a unique, ordered queue.
+
+Change events are managed by "watches".  A watch is an (object,mask) pair where
+the object is a file or directory and the mask is a bit mask of one or more
+inotify events that the application wishes to receive.  See <linux/inotify.h>
+for valid events.  A watch is referenced by a watch descriptor, or wd.
+
+Watches are added via a path to the file.
+
+Watches on a directory will return events on any files inside of the directory.
+
+Adding a watch is simple:
+
+	int wd = inotify_add_watch (fd, path, mask);
+
+Where "fd" is the return value from inotify_init(), path is the path to the
+object to watch, and mask is the watch mask (see <linux/inotify.h>).
+
+You can update an existing watch in the same manner, by passing in a new mask.
+
+An existing watch is removed via
+
+	int ret = inotify_rm_watch (fd, wd);
+
+Events are provided in the form of an inotify_event structure that is read(2)
+from a given inotify instance.  The filename is of dynamic length and follows
+the struct. It is of size len.  The filename is padded with null bytes to
+ensure proper alignment.  This padding is reflected in len.
+
+You can slurp multiple events by passing a large buffer, for example
+
+	size_t len = read (fd, buf, BUF_LEN);
+
+Where "buf" is a pointer to an array of "inotify_event" structures at least
+BUF_LEN bytes in size.  The above example will return as many events as are
+available and fit in BUF_LEN.
+
+Each inotify instance fd is also select()- and poll()-able.
+
+You can find the size of the current event queue via the standard FIONREAD
+ioctl on the fd returned by inotify_init().
+
+All watches are destroyed and cleaned up on close.
+
+
+(ii)
+
+Prototypes:
+
+	int inotify_init (void);
+	int inotify_add_watch (int fd, const char *path, __u32 mask);
+	int inotify_rm_watch (int fd, __u32 mask);
+
+
+(iii) Internal Kernel Implementation
+
+Each inotify instance is associated with an inotify_device structure.
+
+Each watch is associated with an inotify_watch structure.  Watches are chained
+off of each associated device and each associated inode.
+
+See fs/inotify.c for the locking and lifetime rules.
+
+
+(iv) Rationale
+
+Q: What is the design decision behind not tying the watch to the open fd of
+   the watched object?
+
+A: Watches are associated with an open inotify device, not an open file.
+   This solves the primary problem with dnotify: keeping the file open pins
+   the file and thus, worse, pins the mount.  Dnotify is therefore infeasible
+   for use on a desktop system with removable media as the media cannot be
+   unmounted.  Watching a file should not require that it be open.
+
+Q: What is the design decision behind using an-fd-per-instance as opposed to
+   an fd-per-watch?
+
+A: An fd-per-watch quickly consumes more file descriptors than are allowed,
+   more fd's than are feasible to manage, and more fd's than are optimally
+   select()-able.  Yes, root can bump the per-process fd limit and yes, users
+   can use epoll, but requiring both is a silly and extraneous requirement.
+   A watch consumes less memory than an open file, separating the number
+   spaces is thus sensible.  The current design is what user-space developers
+   want: Users initialize inotify, once, and add n watches, requiring but one
+   fd and no twiddling with fd limits.  Initializing an inotify instance two
+   thousand times is silly.  If we can implement user-space's preferences 
+   cleanly--and we can, the idr layer makes stuff like this trivial--then we 
+   should.
+
+   There are other good arguments.  With a single fd, there is a single
+   item to block on, which is mapped to a single queue of events.  The single
+   fd returns all watch events and also any potential out-of-band data.  If
+   every fd was a separate watch,
+
+   - There would be no way to get event ordering.  Events on file foo and
+     file bar would pop poll() on both fd's, but there would be no way to tell
+     which happened first.  A single queue trivially gives you ordering.  Such
+     ordering is crucial to existing applications such as Beagle.  Imagine
+     "mv a b ; mv b a" events without ordering.
+
+   - We'd have to maintain n fd's and n internal queues with state,
+     versus just one.  It is a lot messier in the kernel.  A single, linear
+     queue is the data structure that makes sense.
+
+   - User-space developers prefer the current API.  The Beagle guys, for
+     example, love it.  Trust me, I asked.  It is not a surprise: Who'd want
+     to manage and block on 1000 fd's via select?
+
+   - No way to get out of band data.
+
+   - 1024 is still too low.  ;-)
+
+   When you talk about designing a file change notification system that
+   scales to 1000s of directories, juggling 1000s of fd's just does not seem
+   the right interface.  It is too heavy.
+
+   Additionally, it _is_ possible to  more than one instance  and
+   juggle more than one queue and thus more than one associated fd.  There
+   need not be a one-fd-per-process mapping; it is one-fd-per-queue and a
+   process can easily want more than one queue.
+
+Q: Why the system call approach?
+
+A: The poor user-space interface is the second biggest problem with dnotify.
+   Signals are a terrible, terrible interface for file notification.  Or for
+   anything, for that matter.  The ideal solution, from all perspectives, is a
+   file descriptor-based one that allows basic file I/O and poll/select.
+   Obtaining the fd and managing the watches could have been done either via a
+   device file or a family of new system calls.  We decided to implement a
+   family of system calls because that is the preffered approach for new kernel
+   interfaces.  The only real difference was whether we wanted to use open(2)
+   and ioctl(2) or a couple of new system calls.  System calls beat ioctls.
+

Documentation/filesystems/ntfs.txt

@@ -21,7 +21,7 @@ Overview
 ========
 
 Linux-NTFS comes with a number of user-space programs known as ntfsprogs.
-These include mkntfs, a full-featured ntfs file system format utility,
+These include mkntfs, a full-featured ntfs filesystem format utility,
 ntfsundelete used for recovering files that were unintentionally deleted
 from an NTFS volume and ntfsresize which is used to resize an NTFS partition.
 See the web site for more information.
@@ -149,7 +149,14 @@ case_sensitive=<BOOL>	If case_sensitive is specified, treat all file names as
 			name, if it exists.  If case_sensitive, you will need
 			to provide the correct case of the short file name.
 
-errors=opt		What to do when critical file system errors are found.
+disable_sparse=<BOOL>	If disable_sparse is specified, creation of sparse
+			regions, i.e. holes, inside files is disabled for the
+			volume (for the duration of this mount only).  By
+			default, creation of sparse regions is enabled, which
+			is consistent with the behaviour of traditional Unix
+			filesystems.
+
+errors=opt		What to do when critical filesystem errors are found.
 			Following values can be used for "opt":
 			  continue: DEFAULT, try to clean-up as much as
 				    possible, e.g. marking a corrupt inode as
@@ -432,6 +439,24 @@ ChangeLog
 
 Note, a technical ChangeLog aimed at kernel hackers is in fs/ntfs/ChangeLog.
 
+2.1.23:
+	- Stamp the user space journal, aka transaction log, aka $UsnJrnl, if
+	  it is present and active thus telling Windows and applications using
+	  the transaction log that changes can have happened on the volume
+	  which are not recorded in $UsnJrnl.
+	- Detect the case when Windows has been hibernated (suspended to disk)
+	  and if this is the case do not allow (re)mounting read-write to
+	  prevent data corruption when you boot back into the suspended
+	  Windows session.
+	- Implement extension of resident files using the normal file write
+	  code paths, i.e. most very small files can be extended to be a little
+	  bit bigger but not by much.
+	- Add new mount option "disable_sparse".  (See list of mount options
+	  above for details.)
+	- Improve handling of ntfs volumes with errors and strange boot sectors
+	  in particular.
+	- Fix various bugs including a nasty deadlock that appeared in recent
+	  kernels (around 2.6.11-2.6.12 timeframe).
 2.1.22:
 	- Improve handling of ntfs volumes with errors.
 	- Fix various bugs and race conditions.

Documentation/i2c/chips/max6875

@@ -2,10 +2,10 @@ Kernel driver max6875
 =====================
 
 Supported chips:
-  * Maxim max6874, max6875
-    Prefixes: 'max6875'
+  * Maxim MAX6874, MAX6875
+    Prefix: 'max6875'
     Addresses scanned: 0x50, 0x52
-    Datasheets:
+    Datasheet:
         http://pdfserv.maxim-ic.com/en/ds/MAX6874-MAX6875.pdf
 
 Author: Ben Gardner <bgardner@wabtec.com>
@@ -23,14 +23,26 @@ Module Parameters
 Description
 -----------
 
-The MAXIM max6875 is a EEPROM-programmable power-supply sequencer/supervisor.
+The Maxim MAX6875 is an EEPROM-programmable power-supply sequencer/supervisor.
 It provides timed outputs that can be used as a watchdog, if properly wired.
 It also provides 512 bytes of user EEPROM.
 
-At reset, the max6875 reads the configuration eeprom into its configuration
+At reset, the MAX6875 reads the configuration EEPROM into its configuration
 registers.  The chip then begins to operate according to the values in the
 registers.
 
+The Maxim MAX6874 is a similar, mostly compatible device, with more intputs
+and outputs:
+
+             vin     gpi    vout
+MAX6874        6       4       8
+MAX6875        4       3       5
+
+MAX6874 chips can have four different addresses (as opposed to only two for
+the MAX6875). The additional addresses (0x54 and 0x56) are not probed by
+this driver by default, but the probe module parameter can be used if
+needed.
+
 See the datasheet for details on how to program the EEPROM.
 
 

Documentation/i2c/dev-interface

@@ -14,9 +14,12 @@ C example
 =========
 
 So let's say you want to access an i2c adapter from a C program. The
-first thing to do is `#include <linux/i2c.h>" and "#include <linux/i2c-dev.h>. 
-Yes, I know, you should never include kernel header files, but until glibc 
-knows about i2c, there is not much choice.
+first thing to do is "#include <linux/i2c-dev.h>". Please note that
+there are two files named "i2c-dev.h" out there, one is distributed
+with the Linux kernel and is meant to be included from kernel
+driver code, the other one is distributed with lm_sensors and is
+meant to be included from user-space programs. You obviously want
+the second one here.
 
 Now, you have to decide which adapter you want to access. You should
 inspect /sys/class/i2c-dev/ to decide this. Adapter numbers are assigned
@@ -78,7 +81,7 @@ Full interface description
 ==========================
 
 The following IOCTLs are defined and fully supported 
-(see also i2c-dev.h and i2c.h):
+(see also i2c-dev.h):
 
 ioctl(file,I2C_SLAVE,long addr)
   Change slave address. The address is passed in the 7 lower bits of the
@@ -97,10 +100,10 @@ ioctl(file,I2C_PEC,long select)
 ioctl(file,I2C_FUNCS,unsigned long *funcs)
   Gets the adapter functionality and puts it in *funcs.
 
-ioctl(file,I2C_RDWR,struct i2c_ioctl_rdwr_data *msgset)
+ioctl(file,I2C_RDWR,struct i2c_rdwr_ioctl_data *msgset)
 
   Do combined read/write transaction without stop in between.
-  The argument is a pointer to a struct i2c_ioctl_rdwr_data {
+  The argument is a pointer to a struct i2c_rdwr_ioctl_data {
 
       struct i2c_msg *msgs;  /* ptr to array of simple messages */
       int nmsgs;             /* number of messages to exchange */

Documentation/i2c/writing-clients

@@ -27,7 +27,6 @@ address.
 static struct i2c_driver foo_driver = {
 	.owner		= THIS_MODULE,
 	.name		= "Foo version 2.3 driver",
-	.id		= I2C_DRIVERID_FOO, /* from i2c-id.h, optional */
 	.flags		= I2C_DF_NOTIFY,
 	.attach_adapter	= &foo_attach_adapter,
 	.detach_client	= &foo_detach_client,
@@ -37,12 +36,6 @@ static struct i2c_driver foo_driver = {
 The name can be chosen freely, and may be upto 40 characters long. Please
 use something descriptive here.
 
-If used, the id should be a unique ID. The range 0xf000 to 0xffff is
-reserved for local use, and you can use one of those until you start
-distributing the driver, at which time you should contact the i2c authors
-to get your own ID(s). Note that most of the time you don't need an ID
-at all so you can just omit it.
-
 Don't worry about the flags field; just put I2C_DF_NOTIFY into it. This
 means that your driver will be notified when new adapters are found.
 This is almost always what you want.

Documentation/infiniband/core_locking.txt

@@ -0,0 +1,114 @@
+INFINIBAND MIDLAYER LOCKING
+
+  This guide is an attempt to make explicit the locking assumptions
+  made by the InfiniBand midlayer.  It describes the requirements on
+  both low-level drivers that sit below the midlayer and upper level
+  protocols that use the midlayer.
+
+Sleeping and interrupt context
+
+  With the following exceptions, a low-level driver implementation of
+  all of the methods in struct ib_device may sleep.  The exceptions
+  are any methods from the list:
+
+    create_ah
+    modify_ah
+    query_ah
+    destroy_ah
+    bind_mw
+    post_send
+    post_recv
+    poll_cq
+    req_notify_cq
+    map_phys_fmr
+
+  which may not sleep and must be callable from any context.
+
+  The corresponding functions exported to upper level protocol
+  consumers:
+
+    ib_create_ah
+    ib_modify_ah
+    ib_query_ah
+    ib_destroy_ah
+    ib_bind_mw
+    ib_post_send
+    ib_post_recv
+    ib_req_notify_cq
+    ib_map_phys_fmr
+
+  are therefore safe to call from any context.
+
+  In addition, the function
+
+    ib_dispatch_event
+
+  used by low-level drivers to dispatch asynchronous events through
+  the midlayer is also safe to call from any context.
+
+Reentrancy
+
+  All of the methods in struct ib_device exported by a low-level
+  driver must be fully reentrant.  The low-level driver is required to
+  perform all synchronization necessary to maintain consistency, even
+  if multiple function calls using the same object are run
+  simultaneously.
+
+  The IB midlayer does not perform any serialization of function calls.
+
+  Because low-level drivers are reentrant, upper level protocol
+  consumers are not required to perform any serialization.  However,
+  some serialization may be required to get sensible results.  For
+  example, a consumer may safely call ib_poll_cq() on multiple CPUs
+  simultaneously.  However, the ordering of the work completion
+  information between different calls of ib_poll_cq() is not defined.
+
+Callbacks
+
+  A low-level driver must not perform a callback directly from the
+  same callchain as an ib_device method call.  For example, it is not
+  allowed for a low-level driver to call a consumer's completion event
+  handler directly from its post_send method.  Instead, the low-level
+  driver should defer this callback by, for example, scheduling a
+  tasklet to perform the callback.
+
+  The low-level driver is responsible for ensuring that multiple
+  completion event handlers for the same CQ are not called
+  simultaneously.  The driver must guarantee that only one CQ event
+  handler for a given CQ is running at a time.  In other words, the
+  following situation is not allowed:
+
+        CPU1                                    CPU2
+
+  low-level driver ->
+    consumer CQ event callback:
+      /* ... */
+      ib_req_notify_cq(cq, ...);
+                                        low-level driver ->
+      /* ... */                           consumer CQ event callback:
+                                            /* ... */
+      return from CQ event handler
+
+  The context in which completion event and asynchronous event
+  callbacks run is not defined.  Depending on the low-level driver, it
+  may be process context, softirq context, or interrupt context.
+  Upper level protocol consumers may not sleep in a callback.
+
+Hot-plug
+
+  A low-level driver announces that a device is ready for use by
+  consumers when it calls ib_register_device(), all initialization
+  must be complete before this call.  The device must remain usable
+  until the driver's call to ib_unregister_device() has returned.
+
+  A low-level driver must call ib_register_device() and
+  ib_unregister_device() from process context.  It must not hold any
+  semaphores that could cause deadlock if a consumer calls back into
+  the driver across these calls.
+
+  An upper level protocol consumer may begin using an IB device as
+  soon as the add method of its struct ib_client is called for that
+  device.  A consumer must finish all cleanup and free all resources
+  relating to a device before returning from the remove method.
+
+  A consumer is permitted to sleep in its add and remove methods.

Documentation/infiniband/user_mad.txt

@@ -28,13 +28,37 @@ Creating MAD agents
 
 Receiving MADs
 
-  MADs are received using read().  The buffer passed to read() must be
-  large enough to hold at least one struct ib_user_mad.  For example:
-
-	struct ib_user_mad mad;
-	ret = read(fd, &mad, sizeof mad);
-	if (ret != sizeof mad)
+  MADs are received using read().  The receive side now supports
+  RMPP. The buffer passed to read() must be at least one
+  struct ib_user_mad + 256 bytes. For example:
+
+  If the buffer passed is not large enough to hold the received
+  MAD (RMPP), the errno is set to ENOSPC and the length of the
+  buffer needed is set in mad.length.
+
+  Example for normal MAD (non RMPP) reads:
+	struct ib_user_mad *mad;
+	mad = malloc(sizeof *mad + 256);
+	ret = read(fd, mad, sizeof *mad + 256);
+	if (ret != sizeof mad + 256) {
+		perror("read");
+		free(mad);
+	}
+
+  Example for RMPP reads:
+	struct ib_user_mad *mad;
+	mad = malloc(sizeof *mad + 256);
+	ret = read(fd, mad, sizeof *mad + 256);
+	if (ret == -ENOSPC)) {
+		length = mad.length;
+		free(mad);
+		mad = malloc(sizeof *mad + length);
+		ret = read(fd, mad, sizeof *mad + length);
+	}
+	if (ret < 0) {
 		perror("read");
+		free(mad);
+	}
 
   In addition to the actual MAD contents, the other struct ib_user_mad
   fields will be filled in with information on the received MAD.  For
@@ -50,18 +74,21 @@ Sending MADs
 
   MADs are sent using write().  The agent ID for sending should be
   filled into the id field of the MAD, the destination LID should be
-  filled into the lid field, and so on.  For example:
+  filled into the lid field, and so on.  The send side does support
+  RMPP so arbitrary length MAD can be sent. For example:
+
+	struct ib_user_mad *mad;
 
-	struct ib_user_mad mad;
+	mad = malloc(sizeof *mad + mad_length);
 
-	/* fill in mad.data */
+	/* fill in mad->data */
 
-	mad.id  = my_agent;	/* req.id from agent registration */
-	mad.lid = my_dest;	/* in network byte order... */
+	mad->hdr.id  = my_agent;	/* req.id from agent registration */
+	mad->hdr.lid = my_dest;		/* in network byte order... */
 	/* etc. */
 
-	ret = write(fd, &mad, sizeof mad);
-	if (ret != sizeof mad)
+	ret = write(fd, &mad, sizeof *mad + mad_length);
+	if (ret != sizeof *mad + mad_length)
 		perror("write");
 
 Setting IsSM Capability Bit

Documentation/kernel-parameters.txt

@@ -37,7 +37,7 @@ restrictions referred to are that the relevant option is valid if:
 	IA-32	IA-32 aka i386 architecture is enabled.
 	IA-64	IA-64 architecture is enabled.
 	IOSCHED	More than one I/O scheduler is enabled.
-	IP_PNP	IP DCHP, BOOTP, or RARP is enabled.
+	IP_PNP	IP DHCP, BOOTP, or RARP is enabled.
 	ISAPNP	ISA PnP code is enabled.
 	ISDN	Appropriate ISDN support is enabled.
 	JOY	Appropriate joystick support is enabled.
@@ -758,6 +758,9 @@ running once the system is up.
 	maxcpus=	[SMP] Maximum number of processors that	an SMP kernel
 			should make use of
 
+	max_addr=[KMG]	[KNL,BOOT,ia64] All physical memory greater than or
+			equal to this physical address is ignored.
+
 	max_luns=	[SCSI] Maximum number of LUNs to probe
 			Should be between 1 and 2^32-1.
 

Documentation/pcmcia/driver-changes.txt

@@ -1,6 +1,13 @@
 This file details changes in 2.6 which affect PCMCIA card driver authors:
 
-* in-kernel device<->driver matching
+* event handler initialization in struct pcmcia_driver (as of 2.6.13)
+   The event handler is notified of all events, and must be initialized
+   as the event() callback in the driver's struct pcmcia_driver.
+
+* pcmcia/version.h should not be used (as of 2.6.13)
+   This file will be removed eventually.
+
+* in-kernel device<->driver matching (as of 2.6.13)
    PCMCIA devices and their correct drivers can now be matched in
    kernelspace. See 'devicetable.txt' for details.
 
@@ -49,3 +56,12 @@ This file details changes in 2.6 which affect PCMCIA card driver authors:
    memory regions in-use. The name argument should be a pointer to
    your driver name. Eg, for pcnet_cs, name should point to the
    string "pcnet_cs".
+
+* CardServices is gone
+  CardServices() in 2.4 is just a big switch statement to call various
+  services.  In 2.6, all of those entry points are exported and called
+  directly (except for pcmcia_report_error(), just use cs_error() instead).
+
+* struct pcmcia_driver
+  You need to use struct pcmcia_driver and pcmcia_{un,}register_driver
+  instead of {un,}register_pccard_driver

Documentation/scsi/scsi_mid_low_api.txt

@@ -388,7 +388,6 @@ Summary:
    scsi_remove_device - detach and remove a SCSI device
    scsi_remove_host - detach and remove all SCSI devices owned by host
    scsi_report_bus_reset - report scsi _bus_ reset observed
-   scsi_set_device - place device reference in host structure
    scsi_track_queue_full - track successive QUEUE_FULL events 
    scsi_unblock_requests - allow further commands to be queued to given host
    scsi_unregister - [calls scsi_host_put()]
@@ -740,20 +739,6 @@ int scsi_remove_host(struct Scsi_Host *shost)
 void scsi_report_bus_reset(struct Scsi_Host * shost, int channel)
 
 
-/**
- * scsi_set_device - place device reference in host structure
- * @shost: a pointer to a scsi host instance
- * @pdev: pointer to device instance to assign
- *
- *      Returns nothing
- *
- *      Might block: no
- *
- *      Defined in: include/scsi/scsi_host.h .
- **/
-void scsi_set_device(struct Scsi_Host * shost, struct device * dev)
-
-
 /**
  * scsi_track_queue_full - track successive QUEUE_FULL events on given
  *                      device to determine if and when there is a need

Documentation/sound/alsa/ALSA-Configuration.txt

@@ -636,11 +636,16 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 	  3stack-digout	3-jack in back, a HP out and a SPDIF out
 	  5stack	5-jack in back, 2-jack in front
 	  5stack-digout	5-jack in back, 2-jack in front, a SPDIF out
+	  6stack	6-jack in back, 2-jack in front
+	  6stack-digout	6-jack with a SPDIF out
 	  w810		3-jack
 	  z71v		3-jack (HP shared SPDIF)
 	  asus		3-jack
 	  uniwill	3-jack
 	  F1734		2-jack
+	  test		for testing/debugging purpose, almost all controls can be
+			adjusted.  Appearing only when compiled with
+			$CONFIG_SND_DEBUG=y
 
 	CMI9880
 	  minimal	3-jack in back
@@ -1054,6 +1059,13 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     The power-management is supported.
 
+  Module snd-pxa2xx-ac97 (on arm only)
+  ------------------------------------
+
+    Module for AC97 driver for the Intel PXA2xx chip
+
+    For ARM architecture only.
+
   Module snd-rme32
   ----------------
 
@@ -1173,6 +1185,13 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     Module supports up to 8 cards.
 
+  Module snd-sun-dbri (on sparc only)
+  -----------------------------------
+
+    Module for DBRI sound chips found on Sparcs.
+
+    Module supports up to 8 cards.
+
   Module snd-wavefront
   --------------------
 
@@ -1371,7 +1390,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
   Module snd-vxpocket
   -------------------
 
-    Module for Digigram VX-Pocket VX2 PCMCIA card.
+    Module for Digigram VX-Pocket VX2 and 440 PCMCIA cards.
 
     ibl      - Capture IBL size. (default = 0, minimum size)
 
@@ -1391,29 +1410,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     Note: the driver is build only when CONFIG_ISA is set.
     
-  Module snd-vxp440
-  -----------------
-
-    Module for Digigram VX-Pocket 440 PCMCIA card.
-
-    ibl      - Capture IBL size. (default = 0, minimum size)
-
-    Module supports up to 8 cards.  The module is compiled only when
-    PCMCIA is supported on kernel.
-
-    To activate the driver via the card manager, you'll need to set
-    up /etc/pcmcia/vxp440.conf.  See the sound/pcmcia/vx/vxp440.c.
-
-    When the driver is compiled as a module and the hotplug firmware
-    is supported, the firmware data is loaded via hotplug automatically.
-    Install the necessary firmware files in alsa-firmware package.
-    When no hotplug fw loader is available, you need to load the
-    firmware via vxloader utility in alsa-tools package.
-
-    About capture IBL, see the description of snd-vx222 module.
-
-    Note: the driver is build only when CONFIG_ISA is set.
-    
   Module snd-ymfpci
   -----------------
 

Documentation/stable_api_nonsense.txt

@@ -132,7 +132,7 @@ to extra work for the USB developers.  Since all Linux USB developers do
 their work on their own time, asking programmers to do extra work for no
 gain, for free, is not a possibility.
 
-Security issues are also a very important for Linux.  When a
+Security issues are also very important for Linux.  When a
 security issue is found, it is fixed in a very short amount of time.  A
 number of times this has caused internal kernel interfaces to be
 reworked to prevent the security problem from occurring.  When this

Documentation/stable_kernel_rules.txt

@@ -0,0 +1,58 @@
+Everything you ever wanted to know about Linux 2.6 -stable releases.
+
+Rules on what kind of patches are accepted, and what ones are not, into
+the "-stable" tree:
+
+ - It must be obviously correct and tested.
+ - It can not bigger than 100 lines, with context.
+ - It must fix only one thing.
+ - It must fix a real bug that bothers people (not a, "This could be a
+   problem..." type thing.)
+ - It must fix a problem that causes a build error (but not for things
+   marked CONFIG_BROKEN), an oops, a hang, data corruption, a real
+   security issue, or some "oh, that's not good" issue.  In short,
+   something critical.
+ - No "theoretical race condition" issues, unless an explanation of how
+   the race can be exploited.
+ - It can not contain any "trivial" fixes in it (spelling changes,
+   whitespace cleanups, etc.)
+ - It must be accepted by the relevant subsystem maintainer.
+ - It must follow Documentation/SubmittingPatches rules.
+
+
+Procedure for submitting patches to the -stable tree:
+
+ - Send the patch, after verifying that it follows the above rules, to
+   stable@kernel.org.
+ - The sender will receive an ack when the patch has been accepted into
+   the queue, or a nak if the patch is rejected.  This response might
+   take a few days, according to the developer's schedules.
+ - If accepted, the patch will be added to the -stable queue, for review
+   by other developers.
+ - Security patches should not be sent to this alias, but instead to the
+   documented security@kernel.org.
+
+
+Review cycle:
+
+ - When the -stable maintainers decide for a review cycle, the patches
+   will be sent to the review committee, and the maintainer of the
+   affected area of the patch (unless the submitter is the maintainer of
+   the area) and CC: to the linux-kernel mailing list.
+ - The review committee has 48 hours in which to ack or nak the patch.
+ - If the patch is rejected by a member of the committee, or linux-kernel
+   members object to the patch, bringing up issues that the maintainers
+   and members did not realize, the patch will be dropped from the
+   queue.
+ - At the end of the review cycle, the acked patches will be added to
+   the latest -stable release, and a new -stable release will happen.
+ - Security patches will be accepted into the -stable tree directly from
+   the security kernel team, and not go through the normal review cycle.
+   Contact the kernel security team for more details on this procedure.
+
+
+Review committe:
+
+ - This will be made up of a number of kernel developers who have
+   volunteered for this task, and a few that haven't.
+

Documentation/usb/sn9c102.txt

@@ -297,6 +297,7 @@ Vendor ID  Product ID
 0x0c45     0x602a
 0x0c45     0x602b
 0x0c45     0x602c
+0x0c45     0x602d
 0x0c45     0x6030
 0x0c45     0x6080
 0x0c45     0x6082
@@ -333,6 +334,7 @@ Model       Manufacturer
 -----       ------------
 HV7131D     Hynix Semiconductor, Inc.
 MI-0343     Micron Technology, Inc.
+OV7630      OmniVision Technologies, Inc.
 PAS106B     PixArt Imaging, Inc.
 PAS202BCB   PixArt Imaging, Inc.
 TAS5110C1B  Taiwan Advanced Sensor Corporation
@@ -470,9 +472,11 @@ order):
 - Luca Capello for the donation of a webcam;
 - Joao Rodrigo Fuzaro, Joao Limirio, Claudio Filho and Caio Begotti for the
   donation of a webcam;
+- Jon Hollstrom for the donation of a webcam;
 - Carlos Eduardo Medaglia Dyonisio, who added the support for the PAS202BCB
   image sensor;
 - Stefano Mozzi, who donated 45 EU;
+- Andrew Pearce for the donation of a webcam;
 - Bertrik Sikken, who reverse-engineered and documented the Huffman compression
   algorithm used in the SN9C10x controllers and implemented the first decoder;
 - Mizuno Takafumi for the donation of a webcam;

Documentation/usb/usbmon.txt

@@ -101,6 +101,13 @@ Here is the list of words, from left to right:
   or 3 and 2 positions, correspondingly.
 - URB Status. This field makes no sense for submissions, but is present
   to help scripts with parsing. In error case, it contains the error code.
+  In case of a setup packet, it contains a Setup Tag. If scripts read a number
+  in this field, the proceed to read Data Length. Otherwise, they read
+  the setup packet before reading the Data Length.
+- Setup packet, if present, consists of 5 words: one of each for bmRequestType,
+  bRequest, wValue, wIndex, wLength, as specified by the USB Specification 2.0.
+  These words are safe to decode if Setup Tag was 's'. Otherwise, the setup
+  packet was present, but not captured, and the fields contain filler.
 - Data Length. This is the actual length in the URB.
 - Data tag. The usbmon may not always capture data, even if length is nonzero.
   Only if tag is '=', the data words are present.
@@ -125,25 +132,31 @@ class ParsedLine {
 			String data_str = st.nextToken();
 			int len = data_str.length() / 2;
 			int i;
+			int b;	// byte is signed, apparently?! XXX
 			for (i = 0; i < len; i++) {
-				data[data_len] = Byte.parseByte(
-				    data_str.substring(i*2, i*2 + 2),
-				    16);
+				// data[data_len] = Byte.parseByte(
+				//     data_str.substring(i*2, i*2 + 2),
+				//     16);
+				b = Integer.parseInt(
+				     data_str.substring(i*2, i*2 + 2),
+				     16);
+				if (b >= 128)
+					b *= -1;
+				data[data_len] = (byte) b;
 				data_len++;
 			}
 		}
 	}
 }
 
-This format is obviously deficient. For example, the setup packet for control
-transfers is not delivered. This will change in the future.
+This format may be changed in the future.
 
 Examples:
 
-An input control transfer to get a port status:
+An input control transfer to get a port status.
 
-d74ff9a0 2640288196 S Ci:001:00 -115 4 <
-d74ff9a0 2640288202 C Ci:001:00 0 4 = 01010100
+d5ea89a0 3575914555 S Ci:001:00 s a3 00 0000 0003 0004 4 <
+d5ea89a0 3575914560 C Ci:001:00 0 4 = 01050000
 
 An output bulk transfer to send a SCSI command 0x5E in a 31-byte Bulk wrapper
 to a storage device at address 5:

Documentation/video4linux/CARDLIST.bttv

@@ -1,4 +1,4 @@
-card=0 -  *** UNKNOWN/GENERIC *** 
+card=0 -  *** UNKNOWN/GENERIC ***
 card=1 - MIRO PCTV
 card=2 - Hauppauge (bt848)
 card=3 - STB, Gateway P/N 6000699 (bt848)

Documentation/video4linux/CARDLIST.cx88

@@ -27,3 +27,5 @@ card=25 - Digital-Logic MICROSPACE Entertainment Center (MEC)
 card=26 - IODATA GV/BCTV7E
 card=27 - PixelView PlayTV Ultra Pro (Stereo)
 card=28 - DViCO FusionHDTV 3 Gold-T
+card=29 - ADS Tech Instant TV DVB-T PCI
+card=30 - TerraTec Cinergy 1400 DVB-T

Documentation/video4linux/CARDLIST.saa7134

@@ -1,10 +1,10 @@
-  0 -> UNKNOWN/GENERIC                         
+  0 -> UNKNOWN/GENERIC
   1 -> Proteus Pro [philips reference design]   [1131:2001,1131:2001]
   2 -> LifeView FlyVIDEO3000                    [5168:0138,4e42:0138]
   3 -> LifeView FlyVIDEO2000                    [5168:0138]
   4 -> EMPRESS                                  [1131:6752]
   5 -> SKNet Monster TV                         [1131:4e85]
-  6 -> Tevion MD 9717                          
+  6 -> Tevion MD 9717
   7 -> KNC One TV-Station RDS / Typhoon TV Tuner RDS [1131:fe01,1894:fe01]
   8 -> Terratec Cinergy 400 TV                  [153B:1142]
   9 -> Medion 5044
@@ -34,6 +34,7 @@
  33 -> AVerMedia DVD EZMaker                    [1461:10ff]
  34 -> Noval Prime TV 7133
  35 -> AverMedia AverTV Studio 305              [1461:2115]
+ 36 -> UPMOST PURPLE TV                         [12ab:0800]
  37 -> Items MuchTV Plus / IT-005
  38 -> Terratec Cinergy 200 TV                  [153B:1152]
  39 -> LifeView FlyTV Platinum Mini             [5168:0212]
@@ -43,20 +44,21 @@
  43 -> :Zolid Xpert TV7134
  44 -> Empire PCI TV-Radio LE
  45 -> Avermedia AVerTV Studio 307              [1461:9715]
- 46 -> AVerMedia Cardbus TV/Radio               [1461:d6ee]
+ 46 -> AVerMedia Cardbus TV/Radio (E500)        [1461:d6ee]
  47 -> Terratec Cinergy 400 mobile              [153b:1162]
  48 -> Terratec Cinergy 600 TV MK3              [153B:1158]
  49 -> Compro VideoMate Gold+ Pal               [185b:c200]
  50 -> Pinnacle PCTV 300i DVB-T + PAL           [11bd:002d]
  51 -> ProVideo PV952                           [1540:9524]
  52 -> AverMedia AverTV/305                     [1461:2108]
+ 53 -> ASUS TV-FM 7135                          [1043:4845]
  54 -> LifeView FlyTV Platinum FM               [5168:0214,1489:0214]
- 55 -> LifeView FlyDVB-T DUO                    [5168:0306]
+ 55 -> LifeView FlyDVB-T DUO                    [5168:0502,5168:0306]
  56 -> Avermedia AVerTV 307                     [1461:a70a]
  57 -> Avermedia AVerTV GO 007 FM               [1461:f31f]
  58 -> ADS Tech Instant TV (saa7135)            [1421:0350,1421:0370]
  59 -> Kworld/Tevion V-Stream Xpert TV PVR7134
- 60 -> Typhoon DVB-T Duo Digital/Analog Cardbus
- 61 -> Philips TOUGH DVB-T reference design
+ 60 -> Typhoon DVB-T Duo Digital/Analog Cardbus [4e42:0502]
+ 61 -> Philips TOUGH DVB-T reference design     [1131:2004]
  62 -> Compro VideoMate TV Gold+II
  63 -> Kworld Xpert TV PVR7134

Documentation/video4linux/CARDLIST.tuner

@@ -56,9 +56,9 @@ tuner=54 - tda8290+75
 tuner=55 - LG PAL (TAPE series)
 tuner=56 - Philips PAL/SECAM multi (FQ1216AME MK4)
 tuner=57 - Philips FQ1236A MK4
-tuner=58 - Ymec TVision TVF-8531MF
+tuner=58 - Ymec TVision TVF-8531MF/8831MF/8731MF
 tuner=59 - Ymec TVision TVF-5533MF
 tuner=60 - Thomson DDT 7611 (ATSC/NTSC)
-tuner=61 - Tena TNF9533-D/IF
+tuner=61 - Tena TNF9533-D/IF/TNF9533-B/DF
 tuner=62 - Philips TEA5767HN FM Radio
 tuner=63 - Philips FMD1216ME MK3 Hybrid Tuner

Documentation/video4linux/bttv/Cards

@@ -20,7 +20,7 @@ All other cards only differ by additional components as tuners, sound
 decoders, EEPROMs, teletext decoders ...
 
 
-Unsupported Cards: 
+Unsupported Cards:
 ------------------
 
 Cards with Zoran (ZR) or Philips (SAA) or ISA are not supported by
@@ -50,11 +50,11 @@ Bt848a/Bt849 single crytal operation support possible!!!
 Miro/Pinnacle PCTV
 ------------------
 
-- Bt848 
-  some (all??) come with 2 crystals for PAL/SECAM and NTSC 
+- Bt848
+  some (all??) come with 2 crystals for PAL/SECAM and NTSC
 - PAL, SECAM or NTSC TV tuner (Philips or TEMIC)
 - MSP34xx sound decoder on add on board
-  decoder is supported but AFAIK does not yet work 
+  decoder is supported but AFAIK does not yet work
   (other sound MUX setting in GPIO port needed??? somebody who fixed this???)
 - 1 tuner, 1 composite and 1 S-VHS input
 - tuner type is autodetected
@@ -70,7 +70,7 @@ in 1997!
 Hauppauge Win/TV pci
 --------------------
 
-There are many different versions of the Hauppauge cards with different 
+There are many different versions of the Hauppauge cards with different
 tuners (TV+Radio ...), teletext decoders.
 Note that even cards with same model numbers have (depending on the revision)
 different chips on it.
@@ -80,22 +80,22 @@ different chips on it.
 - PAL, SECAM, NTSC or tuner with or without Radio support
 
 e.g.:
-  PAL: 
+  PAL:
   TDA5737: VHF, hyperband and UHF mixer/oscillator for TV and VCR 3-band tuners
   TSA5522: 1.4 GHz I2C-bus controlled synthesizer, I2C 0xc2-0xc3
-  
+
   NTSC:
   TDA5731: VHF, hyperband and UHF mixer/oscillator for TV and VCR 3-band tuners
   TSA5518: no datasheet available on Philips site
-- Philips SAA5246 or SAA5284 ( or no) Teletext decoder chip	
+- Philips SAA5246 or SAA5284 ( or no) Teletext decoder chip
   with buffer RAM (e.g. Winbond W24257AS-35: 32Kx8 CMOS static RAM)
   SAA5246 (I2C 0x22) is supported
-- 256 bytes EEPROM: Microchip 24LC02B or Philips 8582E2Y 
+- 256 bytes EEPROM: Microchip 24LC02B or Philips 8582E2Y
   with configuration information
   I2C address 0xa0 (24LC02B also responds to 0xa2-0xaf)
 - 1 tuner, 1 composite and (depending on model) 1 S-VHS input
 - 14052B: mux for selection of sound source
-- sound decoder: TDA9800, MSP34xx (stereo cards) 
+- sound decoder: TDA9800, MSP34xx (stereo cards)
 
 
 Askey CPH-Series
@@ -108,17 +108,17 @@ Developed by TelSignal(?), OEMed by many vendors (Typhoon, Anubis, Dynalink)
     CPH05x: BT878 with FM
     CPH06x: BT878 (w/o FM)
     CPH07x: BT878 capture only
- 
+
   TV standards:
      CPH0x0: NTSC-M/M
      CPH0x1: PAL-B/G
      CPH0x2: PAL-I/I
      CPH0x3: PAL-D/K
-     CPH0x4: SECAM-L/L 
-     CPH0x5: SECAM-B/G 
-     CPH0x6: SECAM-D/K 
-     CPH0x7: PAL-N/N 
-     CPH0x8: PAL-B/H 
+     CPH0x4: SECAM-L/L
+     CPH0x5: SECAM-B/G
+     CPH0x6: SECAM-D/K
+     CPH0x7: PAL-N/N
+     CPH0x8: PAL-B/H
      CPH0x9: PAL-M/M
 
   CPH03x was often sold as "TV capturer".
@@ -174,7 +174,7 @@ Lifeview Flyvideo Series:
       "The FlyVideo2000 and FlyVideo2000s product name have renamed to FlyVideo98."
       Their Bt8x8 cards are listed as discontinued.
       Flyvideo 2000S was probably sold as Flyvideo 3000 in some contries(Europe?).
-      The new Flyvideo 2000/3000 are SAA7130/SAA7134 based. 
+      The new Flyvideo 2000/3000 are SAA7130/SAA7134 based.
 
   "Flyvideo II" had been the name for the 848 cards, nowadays (in Germany)
   this name is re-used for LR50 Rev.W.
@@ -235,12 +235,12 @@ Prolink
    Multimedia TV packages (card + software pack):
    PixelView Play TV Theater - (Model: PV-M4200) =  PixelView Play TV pro + Software
    PixelView Play TV PAK -     (Model: PV-BT878P+ REV 4E)
-   PixelView Play TV/VCR -     (Model: PV-M3200 REV 4C / 8D / 10A ) 
+   PixelView Play TV/VCR -     (Model: PV-M3200 REV 4C / 8D / 10A )
    PixelView Studio PAK -      (Model:    M2200 REV 4C / 8D / 10A )
    PixelView PowerStudio PAK - (Model: PV-M3600 REV 4E)
    PixelView DigitalVCR PAK -  (Model: PV-M2400 REV 4C / 8D / 10A )
 
-   PixelView PlayTV PAK II (TV/FM card + usb camera)  PV-M3800 
+   PixelView PlayTV PAK II (TV/FM card + usb camera)  PV-M3800
    PixelView PlayTV XP PV-M4700,PV-M4700(w/FM)
    PixelView PlayTV DVR PV-M4600  package contents:PixelView PlayTV pro, windvr & videoMail s/w
 
@@ -254,7 +254,7 @@ Prolink
 
    DTV3000 PV-DTV3000P+ DVB-S CI = Twinhan VP-1030
    DTV2000 DVB-S = Twinhan VP-1020
-   
+
    Video Conferencing:
    PixelView Meeting PAK - (Model: PV-BT878P)
    PixelView Meeting PAK Lite - (Model: PV-BT878P)
@@ -308,7 +308,7 @@ KNC One
 
    newer Cards have saa7134, but model name stayed the same?
 
-Provideo 
+Provideo
 --------
   PV951 or PV-951 (also are sold as:
    Boeder TV-FM Video Capture Card
@@ -353,7 +353,7 @@ AVerMedia
    AVerTV
    AVerTV Stereo
    AVerTV Studio (w/FM)
-   AVerMedia TV98 with Remote 
+   AVerMedia TV98 with Remote
    AVerMedia TV/FM98 Stereo
    AVerMedia TVCAM98
    TVCapture (Bt848)
@@ -373,7 +373,7 @@ AVerMedia
    (1) Daughterboard MB68-A with TDA9820T and TDA9840T
    (2) Sony NE41S soldered (stereo sound?)
    (3) Daughterboard M118-A w/ pic 16c54 and 4 MHz quartz
- 
+
    US site has different drivers for (as of 09/2002):
    EZ Capture/InterCam PCI (BT-848 chip)
    EZ Capture/InterCam PCI (BT-878 chip)
@@ -437,7 +437,7 @@ Terratec
    Terra TValueRadio,             "LR102 Rev.C" printed on the PCB
    Terra TV/Radio+ Version 1.0,   "80-CP2830100-0" TTTV3 printed on the PCB,
 				     "CPH010-E83" on the back, SAA6588T, TDA9873H
-   Terra TValue Version BT878,    "80-CP2830110-0 TTTV4" printed on the PCB, 
+   Terra TValue Version BT878,    "80-CP2830110-0 TTTV4" printed on the PCB,
 				     "CPH011-D83" on back
    Terra TValue Version 1.0       "ceb105.PCB" (really identical to Terra TV+ Version 1.0)
    Terra TValue New Revision	  "LR102 Rec.C"
@@ -528,7 +528,7 @@ Koutech
    KW-606RSF
    KW-607A (capture only)
    KW-608 (Zoran capture only)
- 
+
 IODATA (jp)
 ------
    GV-BCTV/PCI
@@ -542,15 +542,15 @@ Canopus (jp)
 -------
    WinDVR	= Kworld "KW-TVL878RF"
 
-www.sigmacom.co.kr 
+www.sigmacom.co.kr
 ------------------
-   Sigma Cyber TV II 
+   Sigma Cyber TV II
 
 www.sasem.co.kr
 ---------------
    Litte OnAir TV
 
-hama 
+hama
 ----
    TV/Radio-Tuner Card, PCI (Model 44677) = CPH051
 
@@ -638,7 +638,7 @@ Media-Surfer  (esc-kathrein.de)
 
 Jetway (www.jetway.com.tw)
 --------------------------
-   JW-TV 878M 
+   JW-TV 878M
    JW-TV 878  = KWorld KW-TV878RF
 
 Galaxis
@@ -715,7 +715,7 @@ Hauppauge
   809 MyVideo
   872 MyTV2Go FM
 
- 
+
   546 WinTV Nova-S CI
   543 WinTV Nova
   907 Nova-S USB
@@ -739,7 +739,7 @@ Hauppauge
   832 MyTV2Go
   869 MyTV2Go-FM
   805 MyVideo (USB)
-  
+
 
 Matrix-Vision
 -------------
@@ -764,7 +764,7 @@ Gallant  (www.gallantcom.com) www.minton.com.tw
    Intervision IV-550 (bt8x8)
    Intervision IV-100 (zoran)
    Intervision IV-1000 (bt8x8)
-   
+
 Asonic (www.asonic.com.cn) (website down)
 -----------------------------------------
    SkyEye tv 878
@@ -804,11 +804,11 @@ Kworld (www.kworld.com.tw)
 
 JTT/ Justy Corp.http://www.justy.co.jp/ (www.jtt.com.jp website down)
 ---------------------------------------------------------------------
-   JTT-02 (JTT TV) "TV watchmate pro" (bt848) 
+   JTT-02 (JTT TV) "TV watchmate pro" (bt848)
 
 ADS www.adstech.com
 -------------------
-   Channel Surfer TV ( CHX-950 ) 
+   Channel Surfer TV ( CHX-950 )
    Channel Surfer TV+FM ( CHX-960FM )
 
 AVEC www.prochips.com
@@ -874,7 +874,7 @@ www.ids-imaging.de
 ------------------
    Falcon Series (capture only)
  In USA: http://www.theimagingsource.com/
-   DFG/LC1	
+   DFG/LC1
 
 www.sknet-web.co.jp
 -------------------
@@ -890,7 +890,7 @@ Cybertainment
    CyberMail Xtreme
   These are Flyvideo
 
-VCR (http://www.vcrinc.com/) 
+VCR (http://www.vcrinc.com/)
 ---
   Video Catcher 16
 
@@ -920,7 +920,7 @@ Sdisilk www.sdisilk.com/
     SDI Silk 200 SDI Input Card
 
 www.euresys.com
-    PICOLO series 
+    PICOLO series
 
 PMC/Pace
 www.pacecom.co.uk website closed

Documentation/video4linux/not-in-cx2388x-datasheet.txt

@@ -34,4 +34,8 @@ MO_OUTPUT_FORMAT (0x310164)
   2: HACTEXT
   1: HSFMT
 
+0x47 is the sync byte for MPEG-2 transport stream packets.
+Datasheet incorrectly states to use 47 decimal. 188 is the length.
+All DVB compliant frontends output packets with this start code.
+
 =================================================================================

Documentation/x86_64/boot-options.txt

@@ -47,7 +47,7 @@ Timing
   notsc
   Don't use the CPU time stamp counter to read the wall time.
   This can be used to work around timing problems on multiprocessor systems
-  with not properly synchronized CPUs. Only useful with a SMP kernel
+  with not properly synchronized CPUs.
 
   report_lost_ticks
   Report when timer interrupts are lost because some code turned off
@@ -74,6 +74,9 @@ Idle loop
   event. This will make the CPUs eat a lot more power, but may be useful
   to get slightly better performance in multiprocessor benchmarks. It also
   makes some profiling using performance counters more accurate.
+  Please note that on systems with MONITOR/MWAIT support (like Intel EM64T
+  CPUs) this option has no performance advantage over the normal idle loop.
+  It may also interact badly with hyperthreading.
 
 Rebooting
 
@@ -178,6 +181,5 @@ Debugging
 Misc
 
   noreplacement  Don't replace instructions with more appropiate ones
-  				 for the CPU. This may be useful on asymmetric MP systems
-				 where some CPU have less capabilities than the others.
-
+		 for the CPU. This may be useful on asymmetric MP systems
+		 where some CPU have less capabilities than the others.

MAINTAINERS

@@ -1169,6 +1169,12 @@ L:	linux-input@atrey.karlin.mff.cuni.cz
 L:	linux-joystick@atrey.karlin.mff.cuni.cz
 S:	Maintained
 
+INOTIFY
+P:	John McCutchan and Robert Love
+M:	ttb@tentacle.dhs.org and rml@novell.com
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+
 INTEL 810/815 FRAMEBUFFER DRIVER
 P:      Antonino Daplas
 M:      adaplas@pol.net
@@ -1240,7 +1246,7 @@ S:	Maintained
 
 IRDA SUBSYSTEM
 P:	Jean Tourrilhes
-L:	irda-users@lists.sourceforge.net
+L:	irda-users@lists.sourceforge.net (subscribers-only)
 W:	http://irda.sourceforge.net/
 S:	Maintained
 
@@ -1410,13 +1416,20 @@ W:	http://www.penguinppc.org/
 L:	linuxppc-embedded@ozlabs.org
 S:	Maintained
 
-LINUX FOR POWERPC EMBEDDED PPC8XX AND BOOT CODE
+LINUX FOR POWERPC BOOT CODE
 P:	Tom Rini
 M:	trini@kernel.crashing.org
 W:	http://www.penguinppc.org/
 L:	linuxppc-embedded@ozlabs.org
 S:	Maintained
 
+LINUX FOR POWERPC EMBEDDED PPC8XX
+P:	Marcelo Tosatti
+M:	marcelo.tosatti@cyclades.com
+W:	http://www.penguinppc.org/
+L:	linuxppc-embedded@ozlabs.org
+S:	Maintained
+
 LINUX FOR POWERPC EMBEDDED PPC83XX AND PPC85XX
 P:     Kumar Gala
 M:     kumar.gala@freescale.com
@@ -2420,6 +2433,12 @@ L:	linux-usb-users@lists.sourceforge.net
 L:	linux-usb-devel@lists.sourceforge.net
 S:	Maintained
 
+USB OPTION-CARD DRIVER
+P:	Matthias Urlichs
+M:	smurf@smurf.noris.de
+L:	linux-usb-devel@lists.sourceforge.net
+S:	Maintained
+
 USB OV511 DRIVER
 P:	Mark McClelland
 M:	mmcclell@bigfoot.com

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 13
-EXTRAVERSION =-rc2
+EXTRAVERSION =-rc4
 NAME=Woozy Numbat
 
 # *DOCUMENTATION*

README

@@ -87,6 +87,16 @@ INSTALLING the kernel:
    kernel source.  Patches are applied from the current directory, but
    an alternative directory can be specified as the second argument.
 
+ - If you are upgrading between releases using the stable series patches
+   (for example, patch-2.6.xx.y), note that these "dot-releases" are
+   not incremental and must be applied to the 2.6.xx base tree. For
+   example, if your base kernel is 2.6.12 and you want to apply the
+   2.6.12.3 patch, you do not and indeed must not first apply the
+   2.6.12.1 and 2.6.12.2 patches. Similarly, if you are running kernel
+   version 2.6.12.2 and want to jump to 2.6.12.3, you must first
+   reverse the 2.6.12.2 patch (that is, patch -R) _before_ applying
+   the 2.6.12.3 patch.
+
  - Make sure you have no stale .o files and dependencies lying around:
 
 		cd linux

arch/alpha/Kconfig

@@ -596,6 +596,8 @@ source "fs/Kconfig.binfmt"
 
 endmenu
 
+source "net/Kconfig"
+
 source "drivers/Kconfig"
 
 source "fs/Kconfig"

arch/alpha/kernel/process.c

@@ -165,7 +165,6 @@ machine_restart(char *restart_cmd)
 	common_shutdown(LINUX_REBOOT_CMD_RESTART, restart_cmd);
 }
 
-EXPORT_SYMBOL(machine_restart);
 
 void
 machine_halt(void)
@@ -173,7 +172,6 @@ machine_halt(void)
 	common_shutdown(LINUX_REBOOT_CMD_HALT, NULL);
 }
 
-EXPORT_SYMBOL(machine_halt);
 
 void
 machine_power_off(void)
@@ -181,7 +179,6 @@ machine_power_off(void)
 	common_shutdown(LINUX_REBOOT_CMD_POWER_OFF, NULL);
 }
 
-EXPORT_SYMBOL(machine_power_off);
 
 /* Used by sysrq-p, among others.  I don't believe r9-r15 are ever
    saved in the context it's used.  */

arch/alpha/kernel/systbls.S

@@ -461,6 +461,11 @@ sys_call_table:
 	.quad sys_add_key
 	.quad sys_request_key			/* 440 */
 	.quad sys_keyctl
+	.quad sys_ioprio_set
+	.quad sys_ioprio_get
+	.quad sys_inotify_init
+	.quad sys_inotify_add_watch		/* 445 */
+	.quad sys_inotify_rm_watch
 
 	.size sys_call_table, . - sys_call_table
 	.type sys_call_table, @object

arch/arm/Kconfig

@@ -223,7 +223,9 @@ source "arch/arm/mach-pxa/Kconfig"
 
 source "arch/arm/mach-sa1100/Kconfig"
 
-source "arch/arm/mach-omap/Kconfig"
+source "arch/arm/plat-omap/Kconfig"
+
+source "arch/arm/mach-omap1/Kconfig"
 
 source "arch/arm/mach-s3c2410/Kconfig"
 
@@ -514,7 +516,7 @@ config XIP_PHYS_ADDR
 
 endmenu
 
-if (ARCH_SA1100 || ARCH_INTEGRATOR)
+if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP1)
 
 menu "CPU Frequency scaling"
 
@@ -698,6 +700,8 @@ config APM
 
 endmenu
 
+source "net/Kconfig"
+
 menu "Device Drivers"
 
 source "drivers/base/Kconfig"
@@ -730,7 +734,7 @@ source "drivers/ieee1394/Kconfig"
 
 source "drivers/message/i2o/Kconfig"
 
-source "net/Kconfig"
+source "drivers/net/Kconfig"
 
 source "drivers/isdn/Kconfig"
 
@@ -742,6 +746,8 @@ source "drivers/char/Kconfig"
 
 source "drivers/i2c/Kconfig"
 
+source "drivers/hwmon/Kconfig"
+
 #source "drivers/l3/Kconfig"
 
 source "drivers/misc/Kconfig"

arch/arm/Makefile

@@ -91,7 +91,8 @@ textaddr-$(CONFIG_ARCH_FORTUNET)   := 0xc0008000
  machine-$(CONFIG_ARCH_IOP3XX)	   := iop3xx
  machine-$(CONFIG_ARCH_IXP4XX)	   := ixp4xx
  machine-$(CONFIG_ARCH_IXP2000)    := ixp2000
- machine-$(CONFIG_ARCH_OMAP)	   := omap
+ machine-$(CONFIG_ARCH_OMAP1)	   := omap1
+  incdir-$(CONFIG_ARCH_OMAP)	   := omap
  machine-$(CONFIG_ARCH_S3C2410)	   := s3c2410
  machine-$(CONFIG_ARCH_LH7A40X)	   := lh7a40x
  machine-$(CONFIG_ARCH_VERSATILE)  := versatile
@@ -142,6 +143,9 @@ core-$(CONFIG_FPE_NWFPE)	+= arch/arm/nwfpe/
 core-$(CONFIG_FPE_FASTFPE)	+= $(FASTFPE_OBJ)
 core-$(CONFIG_VFP)		+= arch/arm/vfp/
 
+# If we have a common platform directory, then include it in the build.
+core-$(CONFIG_ARCH_OMAP)	+= arch/arm/plat-omap/
+
 drivers-$(CONFIG_OPROFILE)      += arch/arm/oprofile/
 drivers-$(CONFIG_ARCH_CLPS7500)	+= drivers/acorn/char/
 drivers-$(CONFIG_ARCH_L7200)	+= drivers/acorn/char/

arch/arm/boot/compressed/head-shark.S

@@ -63,8 +63,8 @@ __beginning:	mov	r4, r0				@ save the entry to the firmware
 
 		mov	pc, r2
 
-__copy_target:	.long	0x08508000
-__copy_end:	.long	0x08608000
+__copy_target:	.long	0x08507FFC
+__copy_end:	.long	0x08607FFC
 		
 		.word	_start
 		.word	__bss_start
@@ -73,9 +73,10 @@ __copy_end:	.long	0x08608000
 __temp_stack:	.space 128
 
 __mmu_off:
-		adr	r0, __ofw_data
+		adr	r0, __ofw_data			@ read the 1. entry of the memory map
 		ldr	r0, [r0, #4]
 		orr	r0, r0, #0x00600000
+		sub	r0, r0, #4
 	
 		ldr	r1, __copy_end
 		ldr	r3, __copy_target
@@ -89,20 +90,43 @@ __mmu_off:
  * from 0x08500000 to 0x08508000 if we have only 8MB
  */
 
+/* As we get more 2.6-kernels it gets more and more
+ * uncomfortable to be bound to kernel images of 1MB only.
+ * So we add a loop here, to be able to copy some more.
+ * Alexander Schulz 2005-07-17
+ */
+
+		mov	r4, #3				@ How many megabytes to copy
+
+
+__MoveCode:	sub	r4, r4, #1
 	
 __Copy:		ldr	r2, [r0], #-4
 		str	r2, [r1], #-4
 		teq	r1, r3
 		bne	__Copy
+
+		/* The firmware maps us in blocks of 1 MB, the next block is
+		   _below_ the last one. So our decrementing source pointer
+		   ist right here, but the destination pointer must be increased
+		   by 2 MB */
+		add	r1, r1, #0x00200000
+		add	r3, r3, #0x00100000
+
+		teq	r4, #0
+		bne	__MoveCode
+
+
 		/* and jump to it */
-		adr	r2, __go_on
-		adr	r0, __ofw_data
+		adr	r2, __go_on			@ where we want to jump
+		adr	r0, __ofw_data			@ read the 1. entry of the memory map
 		ldr	r0, [r0, #4]
-		sub	r2, r2, r0
-		sub	r2, r2, #0x00500000
-		ldr	r0, __copy_target
+		sub	r2, r2, r0			@ we are mapped add 0e50 now, sub that (-0e00)
+		sub	r2, r2, #0x00500000		@ -0050
+		ldr	r0, __copy_target		@ and add 0850 8000 instead
+		add	r0, r0, #4
 		add	r2, r2, r0
-		mov	pc, r2
+		mov	pc, r2				@ and jump there
 
 __go_on:
 		adr	sp, __temp_stack

arch/arm/configs/bast_defconfig

@@ -561,7 +561,6 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
 #
 CONFIG_SERIAL_S3C2410=y
 CONFIG_SERIAL_S3C2410_CONSOLE=y
-CONFIG_SERIAL_BAST_SIO=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y

arch/arm/configs/enp2611_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-git6
-# Sat Jun 25 00:57:29 2005
+# Linux kernel version: 2.6.13-rc2
+# Thu Jul  7 16:41:21 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
@@ -137,6 +137,7 @@ CONFIG_PCI_NAMES=y
 #
 # CONFIG_SMP is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -345,10 +346,9 @@ CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
@@ -363,17 +363,8 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_TUNNEL is not set
 # CONFIG_IP_TCPDIAG is not set
 # CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# TCP congestion control
-#
+# CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
-CONFIG_TCP_CONG_WESTWOOD=m
-CONFIG_TCP_CONG_HTCP=m
-# CONFIG_TCP_CONG_HSTCP is not set
-# CONFIG_TCP_CONG_HYBLA is not set
-# CONFIG_TCP_CONG_VEGAS is not set
-# CONFIG_TCP_CONG_SCALABLE is not set
 # CONFIG_IPV6 is not set
 # CONFIG_NETFILTER is not set
 
@@ -931,4 +922,3 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-# CONFIG_TEXTSEARCH is not set

arch/arm/configs/ixdp2400_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-git6
-# Sat Jun 25 00:58:38 2005
+# Linux kernel version: 2.6.13-rc2
+# Thu Jul  7 16:49:01 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
@@ -138,6 +138,7 @@ CONFIG_PCI_NAMES=y
 #
 # CONFIG_SMP is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -346,10 +347,9 @@ CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
@@ -364,17 +364,8 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_TUNNEL is not set
 # CONFIG_IP_TCPDIAG is not set
 # CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# TCP congestion control
-#
+# CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
-CONFIG_TCP_CONG_WESTWOOD=m
-CONFIG_TCP_CONG_HTCP=m
-# CONFIG_TCP_CONG_HSTCP is not set
-# CONFIG_TCP_CONG_HYBLA is not set
-# CONFIG_TCP_CONG_VEGAS is not set
-# CONFIG_TCP_CONG_SCALABLE is not set
 # CONFIG_IPV6 is not set
 # CONFIG_NETFILTER is not set
 
@@ -932,4 +923,3 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-# CONFIG_TEXTSEARCH is not set

arch/arm/configs/ixdp2401_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-git6
-# Sat Jun 25 00:59:35 2005
+# Linux kernel version: 2.6.13-rc2
+# Thu Jul  7 16:49:08 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
@@ -138,6 +138,7 @@ CONFIG_PCI_NAMES=y
 #
 # CONFIG_SMP is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -346,10 +347,9 @@ CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
@@ -364,17 +364,8 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_IP_TCPDIAG=y
 # CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# TCP congestion control
-#
+# CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
-CONFIG_TCP_CONG_WESTWOOD=m
-CONFIG_TCP_CONG_HTCP=m
-# CONFIG_TCP_CONG_HSTCP is not set
-# CONFIG_TCP_CONG_HYBLA is not set
-# CONFIG_TCP_CONG_VEGAS is not set
-# CONFIG_TCP_CONG_SCALABLE is not set
 # CONFIG_IPV6 is not set
 # CONFIG_NETFILTER is not set
 
@@ -933,4 +924,3 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-# CONFIG_TEXTSEARCH is not set

arch/arm/configs/ixdp2800_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-git6
-# Sat Jun 25 01:00:27 2005
+# Linux kernel version: 2.6.13-rc2
+# Thu Jul  7 16:49:20 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
@@ -138,6 +138,7 @@ CONFIG_PCI_NAMES=y
 #
 # CONFIG_SMP is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -346,10 +347,9 @@ CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
@@ -364,17 +364,8 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_TUNNEL is not set
 # CONFIG_IP_TCPDIAG is not set
 # CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# TCP congestion control
-#
+# CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
-CONFIG_TCP_CONG_WESTWOOD=m
-CONFIG_TCP_CONG_HTCP=m
-# CONFIG_TCP_CONG_HSTCP is not set
-# CONFIG_TCP_CONG_HYBLA is not set
-# CONFIG_TCP_CONG_VEGAS is not set
-# CONFIG_TCP_CONG_SCALABLE is not set
 # CONFIG_IPV6 is not set
 # CONFIG_NETFILTER is not set
 
@@ -932,4 +923,3 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-# CONFIG_TEXTSEARCH is not set

arch/arm/configs/ixdp2801_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-git6
-# Sat Jun 25 01:01:18 2005
+# Linux kernel version: 2.6.13-rc2
+# Thu Jul  7 16:49:13 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
@@ -138,6 +138,7 @@ CONFIG_PCI_NAMES=y
 #
 # CONFIG_SMP is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -346,10 +347,9 @@ CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
@@ -364,17 +364,8 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_TUNNEL is not set
 # CONFIG_IP_TCPDIAG is not set
 # CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# TCP congestion control
-#
+# CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
-CONFIG_TCP_CONG_WESTWOOD=m
-CONFIG_TCP_CONG_HTCP=m
-# CONFIG_TCP_CONG_HSTCP is not set
-# CONFIG_TCP_CONG_HYBLA is not set
-# CONFIG_TCP_CONG_VEGAS is not set
-# CONFIG_TCP_CONG_SCALABLE is not set
 # CONFIG_IPV6 is not set
 # CONFIG_NETFILTER is not set
 
@@ -933,4 +924,3 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-# CONFIG_TEXTSEARCH is not set

arch/arm/configs/omap_h2_1610_defconfig

@@ -1,14 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 17:52:41 2005
+# Linux kernel version: 2.6.13-rc2
+# Fri Jul  8 04:49:34 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
 CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
 
 #
 # Code maturity level options
@@ -17,6 +16,7 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
@@ -33,8 +33,9 @@ CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -82,10 +83,28 @@ CONFIG_ARCH_OMAP=y
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
 
 #
 # TI OMAP Implementations
 #
+CONFIG_ARCH_OMAP_OTG=y
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
 
 #
 # OMAP Core Type
@@ -93,7 +112,6 @@ CONFIG_ARCH_OMAP=y
 # CONFIG_ARCH_OMAP730 is not set
 # CONFIG_ARCH_OMAP1510 is not set
 CONFIG_ARCH_OMAP16XX=y
-CONFIG_ARCH_OMAP_OTG=y
 
 #
 # OMAP Board Type
@@ -101,21 +119,14 @@ CONFIG_ARCH_OMAP_OTG=y
 # CONFIG_MACH_OMAP_INNOVATOR is not set
 CONFIG_MACH_OMAP_H2=y
 # CONFIG_MACH_OMAP_H3 is not set
-# CONFIG_MACH_OMAP_H4 is not set
 # CONFIG_MACH_OMAP_OSK is not set
 # CONFIG_MACH_OMAP_GENERIC is not set
 
 #
-# OMAP Feature Selections
+# OMAP CPU Speed
 #
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
+# CONFIG_OMAP_ARM_216MHZ is not set
 CONFIG_OMAP_ARM_192MHZ=y
 # CONFIG_OMAP_ARM_168MHZ is not set
 # CONFIG_OMAP_ARM_120MHZ is not set
@@ -145,6 +156,7 @@ CONFIG_ARM_THUMB=y
 #
 # Bus support
 #
+CONFIG_ISA_DMA_API=y
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -154,7 +166,16 @@ CONFIG_ARM_THUMB=y
 #
 # Kernel Features
 #
+# CONFIG_SMP is not set
 CONFIG_PREEMPT=y
+CONFIG_NO_IDLE_HZ=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_LEDS is not set
 CONFIG_ALIGNMENT_TRAP=y
 
@@ -166,6 +187,22 @@ CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=0801 ro init=/bin/sh"
 # CONFIG_XIP_KERNEL is not set
 
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+
 #
 # Floating point emulation
 #
@@ -202,7 +239,6 @@ CONFIG_PM=y
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-CONFIG_DEBUG_DRIVER=y
 
 #
 # Memory Technology Devices (MTD)
@@ -292,7 +328,6 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
@@ -327,6 +362,7 @@ CONFIG_SCSI_PROC_FS=y
 # CONFIG_CHR_DEV_OSST is not set
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -356,6 +392,7 @@ CONFIG_SCSI_PROC_FS=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -375,12 +412,12 @@ CONFIG_NET=y
 #
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
@@ -395,6 +432,8 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_IP_TCPDIAG=y
 # CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 # CONFIG_NETFILTER is not set
 
@@ -442,6 +481,7 @@ CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -518,7 +558,6 @@ CONFIG_SERIO=y
 CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 
 #
 # Character devices
@@ -567,13 +606,11 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
 # TPM devices
 #
-# CONFIG_TCG_TPM is not set
 
 #
 # I2C support
@@ -604,7 +641,9 @@ CONFIG_I2C_CHARDEV=y
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
 # CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_FSCHER is not set
 # CONFIG_SENSORS_FSCPOS is not set
@@ -620,6 +659,7 @@ CONFIG_I2C_CHARDEV=y
 # CONFIG_SENSORS_LM85 is not set
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
@@ -627,15 +667,21 @@ CONFIG_I2C_CHARDEV=y
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 
 #
 # Other I2C Chip support
 #
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
 CONFIG_ISP1301_OMAP=y
+CONFIG_TPS65010=y
+# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -663,8 +709,10 @@ CONFIG_FB=y
 # CONFIG_FB_CFB_COPYAREA is not set
 # CONFIG_FB_CFB_IMAGEBLIT is not set
 # CONFIG_FB_SOFT_CURSOR is not set
+# CONFIG_FB_MACMODES is not set
 CONFIG_FB_MODE_HELPERS=y
 # CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -677,11 +725,13 @@ CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
 # CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
 # CONFIG_FONT_PEARL_8x8 is not set
 # CONFIG_FONT_ACORN_8x8 is not set
 # CONFIG_FONT_MINI_4x6 is not set
 # CONFIG_FONT_SUN8x16 is not set
 # CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
 
 #
 # Logo configuration
@@ -729,14 +779,14 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 #
 CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_NET2280 is not set
 # CONFIG_USB_GADGET_PXA2XX is not set
 # CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_SA1100 is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
 CONFIG_USB_GADGET_OMAP=y
 CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
 # CONFIG_USB_GADGET_DUALSPEED is not set
 # CONFIG_USB_ZERO is not set
 CONFIG_USB_ETH=y
@@ -755,6 +805,7 @@ CONFIG_USB_ETH_RNDIS=y
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
@@ -791,7 +842,6 @@ CONFIG_FAT_DEFAULT_CODEPAGE=437
 #
 CONFIG_PROC_FS=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
 # CONFIG_DEVPTS_FS_XATTR is not set
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
@@ -828,12 +878,14 @@ CONFIG_CRAMFS=y
 #
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 # CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
 CONFIG_RPCSEC_GSS_KRB5=y
@@ -903,24 +955,11 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
 CONFIG_FRAME_POINTER=y
-CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_DEBUG_USER is not set
 
 #
 # Security options

arch/arm/configs/s3c2410_defconfig

@@ -570,7 +570,6 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
 #
 CONFIG_SERIAL_S3C2410=y
 CONFIG_SERIAL_S3C2410_CONSOLE=y
-CONFIG_SERIAL_BAST_SIO=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y

arch/arm/configs/shark_defconfig

@@ -1,22 +1,21 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 23:59:14 2005
+# Linux kernel version: 2.6.12-git3
+# Sat Jul 16 15:21:47 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
 CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-# CONFIG_CLEAN_COMPILE is not set
-CONFIG_BROKEN=y
+CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
@@ -33,7 +32,10 @@ CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -81,6 +83,7 @@ CONFIG_ARCH_SHARK=y
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
 
 #
 # Processor Type
@@ -103,10 +106,12 @@ CONFIG_CPU_TLB_V4WB=y
 #
 CONFIG_ISA=y
 CONFIG_ISA_DMA=y
+CONFIG_ISA_DMA_API=y
 CONFIG_PCI=y
 CONFIG_PCI_HOST_VIA82C505=y
 CONFIG_PCI_LEGACY_PROC=y
 # CONFIG_PCI_NAMES is not set
+# CONFIG_PCI_DEBUG is not set
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -116,7 +121,9 @@ CONFIG_PCI_LEGACY_PROC=y
 #
 # Kernel Features
 #
+# CONFIG_SMP is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_DISCONTIGMEM is not set
 CONFIG_LEDS=y
 CONFIG_LEDS_TIMER=y
 # CONFIG_LEDS_CPU is not set
@@ -163,6 +170,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_STANDALONE is not set
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
 
 #
 # Memory Technology Devices (MTD)
@@ -172,8 +180,8 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Parallel port support
 #
-CONFIG_PARPORT=y
-CONFIG_PARPORT_PC=y
+CONFIG_PARPORT=m
+CONFIG_PARPORT_PC=m
 # CONFIG_PARPORT_SERIAL is not set
 # CONFIG_PARPORT_PC_FIFO is not set
 # CONFIG_PARPORT_PC_SUPERIO is not set
@@ -189,7 +197,6 @@ CONFIG_PARPORT_PC=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_DEV_XD is not set
 # CONFIG_PARIDE is not set
 # CONFIG_BLK_CPQ_DA is not set
@@ -229,7 +236,7 @@ CONFIG_BLK_DEV_IDE=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD=m
 # CONFIG_BLK_DEV_IDETAPE is not set
 CONFIG_BLK_DEV_IDEFLOPPY=y
 # CONFIG_BLK_DEV_IDESCSI is not set
@@ -261,6 +268,7 @@ CONFIG_CHR_DEV_ST=m
 CONFIG_BLK_DEV_SR=m
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -290,17 +298,14 @@ CONFIG_CHR_DEV_SG=m
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_IN2000 is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_CPQFCTS is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_DTC3280 is not set
 # CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_GENERIC_NCR5380 is not set
@@ -314,11 +319,8 @@ CONFIG_CHR_DEV_SG=m
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PCI2000 is not set
-# CONFIG_SCSI_PCI2220I is not set
 # CONFIG_SCSI_PSI240I is not set
 # CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 CONFIG_SCSI_QLA2XXX=m
@@ -327,6 +329,7 @@ CONFIG_SCSI_QLA2XXX=m
 # CONFIG_SCSI_QLA2300 is not set
 # CONFIG_SCSI_QLA2322 is not set
 # CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_SYM53C416 is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -344,6 +347,8 @@ CONFIG_SCSI_QLA2XXX=m
 # Fusion MPT device support
 #
 # CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -365,7 +370,6 @@ CONFIG_NET=y
 #
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -380,7 +384,7 @@ CONFIG_INET=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
+CONFIG_IP_TCPDIAG=y
 # CONFIG_IP_TCPDIAG_IPV6 is not set
 # CONFIG_IPV6 is not set
 # CONFIG_NETFILTER is not set
@@ -439,6 +443,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_LANCE is not set
 # CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
 # CONFIG_NET_VENDOR_RACAL is not set
 
 #
@@ -483,9 +488,11 @@ CONFIG_CS89x0=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
@@ -569,7 +576,6 @@ CONFIG_SERIO_I8042=y
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 
 #
 # Character devices
@@ -592,6 +598,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -653,6 +660,7 @@ CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
 CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
 # CONFIG_FB_CIRRUS is not set
@@ -674,7 +682,7 @@ CONFIG_FB_CYBER2000=y
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
 # CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_PM3 is not set
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -808,7 +816,7 @@ CONFIG_DNOTIFY=y
 #
 # CD-ROM/DVD Filesystems
 #
-CONFIG_ISO9660_FS=y
+CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 # CONFIG_ZISOFS is not set
 # CONFIG_UDF_FS is not set
@@ -816,9 +824,9 @@ CONFIG_JOLIET=y
 #
 # DOS/FAT/NT Filesystems
 #
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
 CONFIG_FAT_DEFAULT_CODEPAGE=437
 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_NTFS_FS is not set
@@ -833,7 +841,6 @@ CONFIG_DEVFS_MOUNT=y
 # CONFIG_DEVFS_DEBUG is not set
 # CONFIG_DEVPTS_FS_XATTR is not set
 # CONFIG_TMPFS is not set
-# CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 
@@ -857,13 +864,14 @@ CONFIG_RAMFS=y
 #
 # Network File Systems
 #
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_SUNRPC=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_SUNRPC=m
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -895,12 +903,12 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Native Language Support
 #
-CONFIG_NLS=y
+CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_437=m
 # CONFIG_NLS_CODEPAGE_737 is not set
 # CONFIG_NLS_CODEPAGE_775 is not set
-CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_850=m
 # CONFIG_NLS_CODEPAGE_852 is not set
 # CONFIG_NLS_CODEPAGE_855 is not set
 # CONFIG_NLS_CODEPAGE_857 is not set
@@ -921,7 +929,7 @@ CONFIG_NLS_CODEPAGE_850=y
 # CONFIG_NLS_CODEPAGE_1250 is not set
 # CONFIG_NLS_CODEPAGE_1251 is not set
 # CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_1=m
 # CONFIG_NLS_ISO8859_2 is not set
 # CONFIG_NLS_ISO8859_3 is not set
 # CONFIG_NLS_ISO8859_4 is not set
@@ -945,11 +953,22 @@ CONFIG_NLS_ISO8859_1=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_MAGIC_SYSRQ is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
 CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_WAITQ is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_LL is not set
 
 #
 # Security options

arch/arm/kernel/process.c

@@ -131,7 +131,6 @@ void machine_halt(void)
 {
 }
 
-EXPORT_SYMBOL(machine_halt);
 
 void machine_power_off(void)
 {
@@ -139,7 +138,6 @@ void machine_power_off(void)
 		pm_power_off();
 }
 
-EXPORT_SYMBOL(machine_power_off);
 
 void machine_restart(char * __unused)
 {
@@ -169,8 +167,6 @@ void machine_restart(char * __unused)
 	while (1);
 }
 
-EXPORT_SYMBOL(machine_restart);
-
 void __show_regs(struct pt_regs *regs)
 {
 	unsigned long flags = condition_codes(regs);

arch/arm/kernel/smp.c

@@ -36,7 +36,7 @@
  * The present bitmask indicates that the CPU is physically present.
  * The online bitmask indicates that the CPU is up and running.
  */
-cpumask_t cpu_present_mask;
+cpumask_t cpu_possible_map;
 cpumask_t cpu_online_map;
 
 /*
@@ -78,7 +78,7 @@ struct smp_call_struct {
 static struct smp_call_struct * volatile smp_call_function_data;
 static DEFINE_SPINLOCK(smp_call_function_lock);
 
-int __init __cpu_up(unsigned int cpu)
+int __cpuinit __cpu_up(unsigned int cpu)
 {
 	struct task_struct *idle;
 	pgd_t *pgd;
@@ -159,7 +159,7 @@ int __init __cpu_up(unsigned int cpu)
  * This is the secondary CPU boot entry.  We're using this CPUs
  * idle thread stack, but a set of temporary page tables.
  */
-asmlinkage void __init secondary_start_kernel(void)
+asmlinkage void __cpuinit secondary_start_kernel(void)
 {
 	struct mm_struct *mm = &init_mm;
 	unsigned int cpu = smp_processor_id();
@@ -176,6 +176,7 @@ asmlinkage void __init secondary_start_kernel(void)
 	cpu_set(cpu, mm->cpu_vm_mask);
 	cpu_switch_mm(mm->pgd, mm);
 	enter_lazy_tlb(mm, current);
+	local_flush_tlb_all();
 
 	cpu_init();
 
@@ -209,7 +210,7 @@ asmlinkage void __init secondary_start_kernel(void)
  * Called by both boot and secondaries to move global data into
  * per-processor storage.
  */
-void __init smp_store_cpu_info(unsigned int cpuid)
+void __cpuinit smp_store_cpu_info(unsigned int cpuid)
 {
 	struct cpuinfo_arm *cpu_info = &per_cpu(cpu_data, cpuid);
 
@@ -235,7 +236,8 @@ void __init smp_prepare_boot_cpu(void)
 {
 	unsigned int cpu = smp_processor_id();
 
-	cpu_set(cpu, cpu_present_mask);
+	cpu_set(cpu, cpu_possible_map);
+	cpu_set(cpu, cpu_present_map);
 	cpu_set(cpu, cpu_online_map);
 }
 
@@ -355,7 +357,7 @@ void show_ipi_list(struct seq_file *p)
 
 	seq_puts(p, "IPI:");
 
-	for_each_online_cpu(cpu)
+	for_each_present_cpu(cpu)
 		seq_printf(p, " %10lu", per_cpu(ipi_data, cpu).ipi_count);
 
 	seq_putc(p, '\n');

arch/arm/kernel/traps.c

@@ -248,16 +248,20 @@ static DEFINE_SPINLOCK(undef_lock);
 
 void register_undef_hook(struct undef_hook *hook)
 {
-	spin_lock_irq(&undef_lock);
+	unsigned long flags;
+
+	spin_lock_irqsave(&undef_lock, flags);
 	list_add(&hook->node, &undef_hook);
-	spin_unlock_irq(&undef_lock);
+	spin_unlock_irqrestore(&undef_lock, flags);
 }
 
 void unregister_undef_hook(struct undef_hook *hook)
 {
-	spin_lock_irq(&undef_lock);
+	unsigned long flags;
+
+	spin_lock_irqsave(&undef_lock, flags);
 	list_del(&hook->node);
-	spin_unlock_irq(&undef_lock);
+	spin_unlock_irqrestore(&undef_lock, flags);
 }
 
 asmlinkage void do_undefinstr(struct pt_regs *regs)

arch/arm/lib/bitops.h

@@ -1,3 +1,33 @@
+#if __LINUX_ARM_ARCH__ >= 6
+	.macro	bitop, instr
+	mov	r2, #1
+	and	r3, r0, #7		@ Get bit offset
+	add	r1, r1, r0, lsr #3	@ Get byte offset
+	mov	r3, r2, lsl r3
+1:	ldrexb	r2, [r1]
+	\instr	r2, r2, r3
+	strexb	r0, r2, [r1]
+	cmp	r0, #0
+	bne	1b
+	mov	pc, lr
+	.endm
+
+	.macro	testop, instr, store
+	and	r3, r0, #7		@ Get bit offset
+	mov	r2, #1
+	add	r1, r1, r0, lsr #3	@ Get byte offset
+	mov	r3, r2, lsl r3		@ create mask
+1:	ldrexb	r2, [r1]
+	ands	r0, r2, r3		@ save old value of bit
+	\instr	r2, r2, r3			@ toggle bit
+	strexb	ip, r2, [r1]
+	cmp	ip, #0
+	bne	1b
+	cmp	r0, #0
+	movne	r0, #1
+2:	mov	pc, lr
+	.endm
+#else
 	.macro	bitop, instr
 	and	r2, r0, #7
 	mov	r3, #1
@@ -31,3 +61,4 @@
 	moveq	r0, #0
 	mov	pc, lr
 	.endm
+#endif

arch/arm/lib/io-shark.c

@@ -11,73 +11,3 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <linux/kernel.h>
-
-#include <asm/io.h>
-
-void print_warning(void)
-{
-	printk(KERN_WARNING "ins?/outs? not implemented on this architecture\n");
-}
-
-void insl(unsigned int port, void *to, int len)
-{
-	print_warning();
-}
-
-void insb(unsigned int port, void *to, int len)
-{
-	print_warning();
-}
-
-void outsl(unsigned int port, const void *from, int len)
-{
-	print_warning();
-}
-
-void outsb(unsigned int port, const void *from, int len)
-{
-	print_warning();
-}
-
-/* these should be in assembler again */
-
-/*
- * Purpose: read a block of data from a hardware register to memory.
- * Proto  : insw(int from_port, void *to, int len_in_words);
- * Proto  : inswb(int from_port, void *to, int len_in_bytes);
- * Notes  : increment to
- */
-
-void insw(unsigned int port, void *to, int len)
-{
-	int i;
-
-	for (i = 0; i < len; i++)
-		((unsigned short *) to)[i] = inw(port);
-}
-
-void inswb(unsigned int port, void *to, int len)
-{
-	insw(port, to, len >> 2);
-}
-
-/*
- * Purpose: write a block of data from memory to a hardware register.
- * Proto  : outsw(int to_reg, void *from, int len_in_words);
- * Proto  : outswb(int to_reg, void *from, int len_in_bytes);
- * Notes  : increments from
- */
-
-void outsw(unsigned int port, const void *from, int len)
-{
-	int i;
-
-	for (i = 0; i < len; i++)
-		outw(((unsigned short *) from)[i], port);
-}
-
-void outswb(unsigned int port, const void *from, int len)
-{
-	outsw(port, from, len >> 2);
-}

arch/arm/mach-integrator/platsmp.c

@@ -15,6 +15,7 @@
 #include <linux/mm.h>
 
 #include <asm/atomic.h>
+#include <asm/cacheflush.h>
 #include <asm/delay.h>
 #include <asm/mmu_context.h>
 #include <asm/procinfo.h>
@@ -27,12 +28,12 @@ extern void integrator_secondary_startup(void);
  * control for which core is the next to come out of the secondary
  * boot "holding pen"
  */
-volatile int __initdata pen_release = -1;
-unsigned long __initdata phys_pen_release = 0;
+volatile int __cpuinitdata pen_release = -1;
+unsigned long __cpuinitdata phys_pen_release = 0;
 
 static DEFINE_SPINLOCK(boot_lock);
 
-void __init platform_secondary_init(unsigned int cpu)
+void __cpuinit platform_secondary_init(unsigned int cpu)
 {
 	/*
 	 * the primary core may have used a "cross call" soft interrupt
@@ -61,7 +62,7 @@ void __init platform_secondary_init(unsigned int cpu)
 	spin_unlock(&boot_lock);
 }
 
-int __init boot_secondary(unsigned int cpu, struct task_struct *idle)
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	unsigned long timeout;
 
@@ -80,6 +81,7 @@ int __init boot_secondary(unsigned int cpu, struct task_struct *idle)
 	 * "cpu" is Linux's internal ID.
 	 */
 	pen_release = cpu;
+	flush_cache_all();
 
 	/*
 	 * XXX
@@ -174,11 +176,13 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 		max_cpus = ncores;
 
 	/*
-	 * Initialise the present mask - this tells us which CPUs should
-	 * be present.
+	 * Initialise the possible/present maps.
+	 * cpu_possible_map describes the set of CPUs which may be present
+	 * cpu_present_map describes the set of CPUs populated
 	 */
 	for (i = 0; i < max_cpus; i++) {
-		cpu_set(i, cpu_present_mask);
+		cpu_set(i, cpu_possible_map);
+		cpu_set(i, cpu_present_map);
 	}
 
 	/*

arch/arm/mach-ixp2000/core.c

@@ -23,7 +23,7 @@
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/bitops.h>
-#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
 #include <linux/mm.h>
 
 #include <asm/types.h>
@@ -125,19 +125,6 @@ static struct map_desc ixp2000_io_desc[] __initdata = {
 	}
 };
 
-static struct uart_port ixp2000_serial_port = {
-	.membase	= (char *)(IXP2000_UART_VIRT_BASE + 3),
-	.mapbase	= IXP2000_UART_PHYS_BASE + 3,
-	.irq		= IRQ_IXP2000_UART,
-	.flags		= UPF_SKIP_TEST,
-	.iotype		= UPIO_MEM,
-	.regshift	= 2,
-	.uartclk	= 50000000,
-	.line		= 0,
-	.type		= PORT_XSCALE,
-	.fifosize	= 16
-};
-
 void __init ixp2000_map_io(void)
 {
 	extern unsigned int processor_id;
@@ -157,12 +144,50 @@ void __init ixp2000_map_io(void)
 	}
 
 	iotable_init(ixp2000_io_desc, ARRAY_SIZE(ixp2000_io_desc));
-	early_serial_setup(&ixp2000_serial_port);
 
 	/* Set slowport to 8-bit mode.  */
 	ixp2000_reg_write(IXP2000_SLOWPORT_FRM, 1);
 }
 
+
+/*************************************************************************
+ * Serial port support for IXP2000
+ *************************************************************************/
+static struct plat_serial8250_port ixp2000_serial_port[] = {
+	{
+		.mapbase	= IXP2000_UART_PHYS_BASE,
+		.membase	= (char *)(IXP2000_UART_VIRT_BASE + 3),
+		.irq		= IRQ_IXP2000_UART,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= 50000000,
+	},
+	{ },
+};
+
+static struct resource ixp2000_uart_resource = {
+	.start		= IXP2000_UART_PHYS_BASE,
+	.end		= IXP2000_UART_PHYS_BASE + 0xffff,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device ixp2000_serial_device = {
+	.name		= "serial8250",
+	.id		= 0,
+	.dev		= {
+		.platform_data		= ixp2000_serial_port,
+	},
+	.num_resources	= 1,
+	.resource	= &ixp2000_uart_resource,
+};
+
+void __init ixp2000_uart_init(void)
+{
+	platform_device_register(&ixp2000_serial_device);
+}
+
+
 /*************************************************************************
  * Timer-tick functions for IXP2000
  *************************************************************************/

arch/arm/mach-ixp2000/enp2611.c

@@ -219,6 +219,7 @@ static struct platform_device *enp2611_devices[] __initdata = {
 static void __init enp2611_init_machine(void)
 {
 	platform_add_devices(enp2611_devices, ARRAY_SIZE(enp2611_devices));
+	ixp2000_uart_init();
 }
 
 

arch/arm/mach-ixp2000/ixdp2x00.c

@@ -303,5 +303,6 @@ void __init ixdp2x00_init_machine(void)
 	gpio_line_config(IXDP2X00_GPIO_I2C_ENABLE, GPIO_OUT);
 
 	platform_add_devices(ixdp2x00_devices, ARRAY_SIZE(ixdp2x00_devices));
+	ixp2000_uart_init();
 }
 

arch/arm/mach-ixp2000/ixdp2x01.c

@@ -370,6 +370,7 @@ static void __init ixdp2x01_init_machine(void)
 		((*IXDP2X01_CPLD_FLASH_REG & IXDP2X01_CPLD_FLASH_BANK_MASK) + 1);
 
 	platform_add_devices(ixdp2x01_devices, ARRAY_SIZE(ixdp2x01_devices));
+	ixp2000_uart_init();
 }
 
 

arch/arm/mach-omap/Kconfig

@@ -1,221 +0,0 @@
-if ARCH_OMAP
-
-menu "TI OMAP Implementations"
-
-comment "OMAP Core Type"
-
-config ARCH_OMAP730
-	depends on ARCH_OMAP
-	bool "OMAP730 Based System"
-	select ARCH_OMAP_OTG
-
-config ARCH_OMAP1510
-	depends on ARCH_OMAP
-	default y
-	bool "OMAP1510 Based System"
-
-config ARCH_OMAP16XX
-	depends on ARCH_OMAP
-	bool "OMAP16XX Based System"
-	select ARCH_OMAP_OTG
-
-config ARCH_OMAP_OTG
-	bool
-
-comment "OMAP Board Type"
-
-config MACH_OMAP_INNOVATOR
-	bool "TI Innovator"
-	depends on ARCH_OMAP1510 || ARCH_OMAP16XX
-	help
-          TI OMAP 1510 or 1610 Innovator board support. Say Y here if you
-          have such a board.
-
-config MACH_OMAP_H2
-	bool "TI H2 Support"
-	depends on ARCH_OMAP16XX
-    	help
-	  TI OMAP 1610/1611B H2 board support. Say Y here if you have such
-	  a board.
-
-config MACH_OMAP_H3
-	bool "TI H3 Support"
-	depends on ARCH_OMAP16XX
-    	help
-	  TI OMAP 1710 H3 board support. Say Y here if you have such
-	  a board.
-
-config MACH_OMAP_H4
-	bool "TI H4 Support"
-	depends on ARCH_OMAP16XX
-    	help
-	  TI OMAP 1610 H4 board support. Say Y here if you have such
-	  a board.
-
-config MACH_OMAP_OSK
-	bool "TI OSK Support"
-	depends on ARCH_OMAP16XX
-    	help
-	  TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here
-          if you have such a board.
-
-config MACH_OMAP_PERSEUS2
-	bool "TI Perseus2"
-	depends on ARCH_OMAP730
-    	help
-	  Support for TI OMAP 730 Perseus2 board. Say Y here if you have such
-	  a board.
-
-config MACH_VOICEBLUE
-	bool "Voiceblue"
-	depends on ARCH_OMAP1510
-	help
-	  Support for Voiceblue GSM/VoIP gateway. Say Y here if you have such
-	  board.
-
-config MACH_NETSTAR
-	bool "NetStar"
-	depends on ARCH_OMAP1510
-	help
-	  Support for NetStar PBX. Say Y here if you have such a board.
-
-config MACH_OMAP_GENERIC
-	bool "Generic OMAP board"
-	depends on ARCH_OMAP1510 || ARCH_OMAP16XX
-	help
-          Support for generic OMAP-1510, 1610 or 1710 board with
-          no FPGA. Can be used as template for porting Linux to
-          custom OMAP boards. Say Y here if you have a custom
-          board.
-
-comment "OMAP Feature Selections"
-
-#config OMAP_BOOT_TAG
-#	bool "OMAP bootloader information passing"
-#        depends on ARCH_OMAP
-#        default n
-#        help
-#          Say Y, if you have a bootloader which passes information
-#          about your board and its peripheral configuration.
-
-config OMAP_MUX
-	bool "OMAP multiplexing support"
-        depends on ARCH_OMAP
-	default y
-        help
-          Pin multiplexing support for OMAP boards. If your bootloader
-          sets the multiplexing correctly, say N. Otherwise, or if unsure,
-          say Y.
-
-config OMAP_MUX_DEBUG
-	bool "Multiplexing debug output"
-        depends on OMAP_MUX
-        default n
-        help
-          Makes the multiplexing functions print out a lot of debug info.
-          This is useful if you want to find out the correct values of the
-          multiplexing registers.
-
-config OMAP_MUX_WARNINGS
-	bool "Warn about pins the bootloader didn't set up"
-        depends on OMAP_MUX
-        default y
-        help
-	  Choose Y here to warn whenever driver initialization logic needs
-	  to change the pin multiplexing setup.  When there are no warnings
-	  printed, it's safe to deselect OMAP_MUX for your product.
-
-choice
-        prompt "System timer"
-	default OMAP_MPU_TIMER
-
-config OMAP_MPU_TIMER
-	bool "Use mpu timer"
-	help
-	  Select this option if you want to use the OMAP mpu timer. This
-	  timer provides more intra-tick resolution than the 32KHz timer,
-	  but consumes more power.
-
-config OMAP_32K_TIMER
-	bool "Use 32KHz timer"
-	depends on ARCH_OMAP16XX
-	help
-	  Select this option if you want to enable the OMAP 32KHz timer.
-	  This timer saves power compared to the OMAP_MPU_TIMER, and has
-	  support for no tick during idle. The 32KHz timer provides less
-	  intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
-	  currently only available for OMAP-16xx.
-
-endchoice
-
-config OMAP_32K_TIMER_HZ
-       int "Kernel internal timer frequency for 32KHz timer"
-       range 32 1024
-       depends on OMAP_32K_TIMER
-       default "128"
-       help
-	  Kernel internal timer frequency should be a divisor of 32768,
-	  such as 64 or 128.
-
-choice
-	prompt "Low-level debug console UART"
-	depends on ARCH_OMAP
-	default OMAP_LL_DEBUG_UART1
-
-config OMAP_LL_DEBUG_UART1
-	bool "UART1"
-
-config OMAP_LL_DEBUG_UART2
-	bool "UART2"
-
-config OMAP_LL_DEBUG_UART3
-	bool "UART3"
-
-endchoice
-
-config OMAP_ARM_195MHZ
-	bool "OMAP ARM 195 MHz CPU"
-	depends on ARCH_OMAP730
-	help
-          Enable 195MHz clock for OMAP CPU. If unsure, say N.
-
-config OMAP_ARM_192MHZ
-	bool "OMAP ARM 192 MHz CPU"
-	depends on ARCH_OMAP16XX
-	help
-          Enable 192MHz clock for OMAP CPU. If unsure, say N.
-
-config OMAP_ARM_182MHZ
-	bool "OMAP ARM 182 MHz CPU"
-	depends on ARCH_OMAP730
-	help
-          Enable 182MHz clock for OMAP CPU. If unsure, say N.
-
-config OMAP_ARM_168MHZ
-	bool "OMAP ARM 168 MHz CPU"
-	depends on ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730
-	help
-          Enable 168MHz clock for OMAP CPU. If unsure, say N.
-
-config OMAP_ARM_120MHZ
-	bool "OMAP ARM 120 MHz CPU"
-	depends on ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730
-	help
-          Enable 120MHz clock for OMAP CPU. If unsure, say N.
-
-config OMAP_ARM_60MHZ
-	bool "OMAP ARM 60 MHz CPU"
-	depends on ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730
-        default y
-	help
-          Enable 60MHz clock for OMAP CPU. If unsure, say Y.
-
-config OMAP_ARM_30MHZ
-	bool "OMAP ARM 30 MHz CPU"
-	depends on ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730
-	help
-          Enable 30MHz clock for OMAP CPU. If unsure, say N.
-
-endmenu
-
-endif

arch/arm/mach-omap/Makefile

@@ -1,40 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Common support
-obj-y := common.o time.o irq.o dma.o clock.o mux.o gpio.o mcbsp.o usb.o
-obj-m :=
-obj-n :=
-obj-  :=
-led-y := leds.o
-
-# Specific board support
-obj-$(CONFIG_MACH_OMAP_H2) += board-h2.o
-obj-$(CONFIG_MACH_OMAP_INNOVATOR) += board-innovator.o
-obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o
-obj-$(CONFIG_MACH_OMAP_PERSEUS2) += board-perseus2.o
-obj-$(CONFIG_MACH_OMAP_OSK) += board-osk.o
-obj-$(CONFIG_MACH_OMAP_H3) += board-h3.o
-obj-$(CONFIG_MACH_VOICEBLUE) += board-voiceblue.o
-obj-$(CONFIG_MACH_NETSTAR) += board-netstar.o
-
-# OCPI interconnect support for 1710, 1610 and 5912
-obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
-
-# LEDs support
-led-$(CONFIG_MACH_OMAP_H2) += leds-h2p2-debug.o
-led-$(CONFIG_MACH_OMAP_INNOVATOR) += leds-innovator.o
-led-$(CONFIG_MACH_OMAP_PERSEUS2) += leds-h2p2-debug.o
-obj-$(CONFIG_LEDS) += $(led-y)
-
-# Power Management
-obj-$(CONFIG_PM) += pm.o sleep.o
-
-ifeq ($(CONFIG_ARCH_OMAP1510),y)
-# Innovator-1510 FPGA
-obj-$(CONFIG_MACH_OMAP_INNOVATOR) += fpga.o
-endif
-
-# kgdb support
-obj-$(CONFIG_KGDB_SERIAL)	+= kgdb-serial.o

arch/arm/mach-omap/common.c

@@ -1,549 +0,0 @@
-/*
- * linux/arch/arm/mach-omap/common.c
- *
- * Code common to all OMAP machines.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pm.h>
-#include <linux/console.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_reg.h>
-
-#include <asm/hardware.h>
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/mach/map.h>
-#include <asm/hardware/clock.h>
-#include <asm/io.h>
-#include <asm/mach-types.h>
-
-#include <asm/arch/board.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/fpga.h>
-
-#include "clock.h"
-
-#define DEBUG 1
-
-struct omap_id {
-	u16	jtag_id;	/* Used to determine OMAP type */
-	u8	die_rev;	/* Processor revision */
-	u32	omap_id;	/* OMAP revision */
-	u32	type;		/* Cpu id bits [31:08], cpu class bits [07:00] */
-};
-
-/* Register values to detect the OMAP version */
-static struct omap_id omap_ids[] __initdata = {
-	{ .jtag_id = 0x355f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300100},
-	{ .jtag_id = 0xb55f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300300},
-	{ .jtag_id = 0xb470, .die_rev = 0x0, .omap_id = 0x03310100, .type = 0x15100000},
-	{ .jtag_id = 0xb576, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x16100000},
-	{ .jtag_id = 0xb576, .die_rev = 0x2, .omap_id = 0x03320100, .type = 0x16110000},
-	{ .jtag_id = 0xb576, .die_rev = 0x3, .omap_id = 0x03320100, .type = 0x16100c00},
-	{ .jtag_id = 0xb576, .die_rev = 0x0, .omap_id = 0x03320200, .type = 0x16100d00},
-	{ .jtag_id = 0xb613, .die_rev = 0x0, .omap_id = 0x03320300, .type = 0x1610ef00},
-	{ .jtag_id = 0xb613, .die_rev = 0x0, .omap_id = 0x03320300, .type = 0x1610ef00},
-	{ .jtag_id = 0xb576, .die_rev = 0x1, .omap_id = 0x03320100, .type = 0x16110000},
-	{ .jtag_id = 0xb58c, .die_rev = 0x2, .omap_id = 0x03320200, .type = 0x16110b00},
-	{ .jtag_id = 0xb58c, .die_rev = 0x3, .omap_id = 0x03320200, .type = 0x16110c00},
-	{ .jtag_id = 0xb65f, .die_rev = 0x0, .omap_id = 0x03320400, .type = 0x16212300},
-	{ .jtag_id = 0xb65f, .die_rev = 0x1, .omap_id = 0x03320400, .type = 0x16212300},
-	{ .jtag_id = 0xb65f, .die_rev = 0x1, .omap_id = 0x03320500, .type = 0x16212300},
-	{ .jtag_id = 0xb5f7, .die_rev = 0x0, .omap_id = 0x03330000, .type = 0x17100000},
-	{ .jtag_id = 0xb5f7, .die_rev = 0x1, .omap_id = 0x03330100, .type = 0x17100000},
-	{ .jtag_id = 0xb5f7, .die_rev = 0x2, .omap_id = 0x03330100, .type = 0x17100000},
-};
-
-/*
- * Get OMAP type from PROD_ID.
- * 1710 has the PROD_ID in bits 15:00, not in 16:01 as documented in TRM.
- * 1510 PROD_ID is empty, and 1610 PROD_ID does not make sense.
- * Undocumented register in TEST BLOCK is used as fallback; This seems to
- * work on 1510, 1610 & 1710. The official way hopefully will work in future
- * processors.
- */
-static u16 __init omap_get_jtag_id(void)
-{
-	u32 prod_id, omap_id;
-
-	prod_id = omap_readl(OMAP_PRODUCTION_ID_1);
-	omap_id = omap_readl(OMAP32_ID_1);
-
-	/* Check for unusable OMAP_PRODUCTION_ID_1 on 1611B/5912 and 730 */
-	if (((prod_id >> 20) == 0) || (prod_id == omap_id))
-		prod_id = 0;
-	else
-		prod_id &= 0xffff;
-
-	if (prod_id)
-		return prod_id;
-
-	/* Use OMAP32_ID_1 as fallback */
-	prod_id = ((omap_id >> 12) & 0xffff);
-
-	return prod_id;
-}
-
-/*
- * Get OMAP revision from DIE_REV.
- * Early 1710 processors may have broken OMAP_DIE_ID, it contains PROD_ID.
- * Undocumented register in the TEST BLOCK is used as fallback.
- * REVISIT: This does not seem to work on 1510
- */
-static u8 __init omap_get_die_rev(void)
-{
-	u32 die_rev;
-
-	die_rev = omap_readl(OMAP_DIE_ID_1);
-
-	/* Check for broken OMAP_DIE_ID on early 1710 */
-	if (((die_rev >> 12) & 0xffff) == omap_get_jtag_id())
-		die_rev = 0;
-
-	die_rev = (die_rev >> 17) & 0xf;
-	if (die_rev)
-		return die_rev;
-
-	die_rev = (omap_readl(OMAP32_ID_1) >> 28) & 0xf;
-
-	return die_rev;
-}
-
-static void __init omap_check_revision(void)
-{
-	int i;
-	u16 jtag_id;
-	u8 die_rev;
-	u32 omap_id;
-	u8 cpu_type;
-
-	jtag_id = omap_get_jtag_id();
-	die_rev = omap_get_die_rev();
-	omap_id = omap_readl(OMAP32_ID_0);
-
-#ifdef DEBUG
-	printk("OMAP_DIE_ID_0: 0x%08x\n", omap_readl(OMAP_DIE_ID_0));
-	printk("OMAP_DIE_ID_1: 0x%08x DIE_REV: %i\n",
-		omap_readl(OMAP_DIE_ID_1),
-	       (omap_readl(OMAP_DIE_ID_1) >> 17) & 0xf);
-	printk("OMAP_PRODUCTION_ID_0: 0x%08x\n", omap_readl(OMAP_PRODUCTION_ID_0));
-	printk("OMAP_PRODUCTION_ID_1: 0x%08x JTAG_ID: 0x%04x\n",
-		omap_readl(OMAP_PRODUCTION_ID_1),
-		omap_readl(OMAP_PRODUCTION_ID_1) & 0xffff);
-	printk("OMAP32_ID_0: 0x%08x\n", omap_readl(OMAP32_ID_0));
-	printk("OMAP32_ID_1: 0x%08x\n", omap_readl(OMAP32_ID_1));
-	printk("JTAG_ID: 0x%04x DIE_REV: %i\n", jtag_id, die_rev);
-#endif
-
-	system_serial_high = omap_readl(OMAP_DIE_ID_0);
-	system_serial_low = omap_readl(OMAP_DIE_ID_1);
-
-	/* First check only the major version in a safe way */
-	for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
-		if (jtag_id == (omap_ids[i].jtag_id)) {
-			system_rev = omap_ids[i].type;
-			break;
-		}
-	}
-
-	/* Check if we can find the die revision */
-	for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
-		if (jtag_id == omap_ids[i].jtag_id && die_rev == omap_ids[i].die_rev) {
-			system_rev = omap_ids[i].type;
-			break;
-		}
-	}
-
-	/* Finally check also the omap_id */
-	for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
-		if (jtag_id == omap_ids[i].jtag_id
-		    && die_rev == omap_ids[i].die_rev
-		    && omap_id == omap_ids[i].omap_id) {
-			system_rev = omap_ids[i].type;
-			break;
-		}
-	}
-
-	/* Add the cpu class info (7xx, 15xx, 16xx, 24xx) */
-	cpu_type = system_rev >> 24;
-
-	switch (cpu_type) {
-	case 0x07:
-		system_rev |= 0x07;
-		break;
-	case 0x15:
-		system_rev |= 0x15;
-		break;
-	case 0x16:
-	case 0x17:
-		system_rev |= 0x16;
-		break;
-	case 0x24:
-		system_rev |= 0x24;
-		break;
-	default:
-		printk("Unknown OMAP cpu type: 0x%02x\n", cpu_type);
-	}
-
-	printk("OMAP%04x", system_rev >> 16);
-	if ((system_rev >> 8) & 0xff)
-		printk("%x", (system_rev >> 8) & 0xff);
-	printk(" revision %i handled as %02xxx id: %08x%08x\n",
-	       die_rev, system_rev & 0xff, system_serial_low,
-	       system_serial_high);
-}
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP I/O mapping
- *
- * The machine specific code may provide the extra mapping besides the
- * default mapping provided here.
- * ----------------------------------------------------------------------------
- */
-
-static struct map_desc omap_io_desc[] __initdata = {
- { IO_VIRT,      	IO_PHYS,             IO_SIZE,        	   MT_DEVICE },
-};
-
-#ifdef CONFIG_ARCH_OMAP730
-static struct map_desc omap730_io_desc[] __initdata = {
- { OMAP730_DSP_BASE,    OMAP730_DSP_START,    OMAP730_DSP_SIZE,    MT_DEVICE },
- { OMAP730_DSPREG_BASE, OMAP730_DSPREG_START, OMAP730_DSPREG_SIZE, MT_DEVICE },
- { OMAP730_SRAM_BASE,   OMAP730_SRAM_START,   OMAP730_SRAM_SIZE,   MT_DEVICE }
-};
-#endif
-
-#ifdef CONFIG_ARCH_OMAP1510
-static struct map_desc omap1510_io_desc[] __initdata = {
- { OMAP1510_DSP_BASE,    OMAP1510_DSP_START,    OMAP1510_DSP_SIZE,    MT_DEVICE },
- { OMAP1510_DSPREG_BASE, OMAP1510_DSPREG_START, OMAP1510_DSPREG_SIZE, MT_DEVICE },
- { OMAP1510_SRAM_BASE,   OMAP1510_SRAM_START,   OMAP1510_SRAM_SIZE,   MT_DEVICE }
-};
-#endif
-
-#if defined(CONFIG_ARCH_OMAP16XX)
-static struct map_desc omap1610_io_desc[] __initdata = {
- { OMAP16XX_DSP_BASE,    OMAP16XX_DSP_START,    OMAP16XX_DSP_SIZE,    MT_DEVICE },
- { OMAP16XX_DSPREG_BASE, OMAP16XX_DSPREG_START, OMAP16XX_DSPREG_SIZE, MT_DEVICE },
- { OMAP16XX_SRAM_BASE,   OMAP16XX_SRAM_START,   OMAP1610_SRAM_SIZE,   MT_DEVICE }
-};
-
-static struct map_desc omap5912_io_desc[] __initdata = {
- { OMAP16XX_DSP_BASE,    OMAP16XX_DSP_START,    OMAP16XX_DSP_SIZE,    MT_DEVICE },
- { OMAP16XX_DSPREG_BASE, OMAP16XX_DSPREG_START, OMAP16XX_DSPREG_SIZE, MT_DEVICE },
-/*
- * The OMAP5912 has 250kByte internal SRAM. Because the mapping is baseed on page
- * size (4kByte), it seems that the last 2kByte (=0x800) of the 250kByte are not mapped.
- * Add additional 2kByte (0x800) so that the last page is mapped and the last 2kByte
- * can be used.
- */
- { OMAP16XX_SRAM_BASE,   OMAP16XX_SRAM_START,   OMAP5912_SRAM_SIZE + 0x800,   MT_DEVICE }
-};
-#endif
-
-static int initialized = 0;
-
-static void __init _omap_map_io(void)
-{
-	initialized = 1;
-
-	/* We have to initialize the IO space mapping before we can run
-	 * cpu_is_omapxxx() macros. */
-	iotable_init(omap_io_desc, ARRAY_SIZE(omap_io_desc));
-	omap_check_revision();
-
-#ifdef CONFIG_ARCH_OMAP730
-	if (cpu_is_omap730()) {
-		iotable_init(omap730_io_desc, ARRAY_SIZE(omap730_io_desc));
-	}
-#endif
-#ifdef CONFIG_ARCH_OMAP1510
-	if (cpu_is_omap1510()) {
-		iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc));
-	}
-#endif
-#if defined(CONFIG_ARCH_OMAP16XX)
-	if (cpu_is_omap1610() || cpu_is_omap1710()) {
-		iotable_init(omap1610_io_desc, ARRAY_SIZE(omap1610_io_desc));
-	}
-	if (cpu_is_omap5912()) {
-		iotable_init(omap5912_io_desc, ARRAY_SIZE(omap5912_io_desc));
-	}
-#endif
-
-	/* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort
-	 * on a Posted Write in the TIPB Bridge".
-	 */
-	omap_writew(0x0, MPU_PUBLIC_TIPB_CNTL);
-	omap_writew(0x0, MPU_PRIVATE_TIPB_CNTL);
-
-	/* Must init clocks early to assure that timer interrupt works
-	 */
-	clk_init();
-}
-
-/*
- * This should only get called from board specific init
- */
-void omap_map_io(void)
-{
-	if (!initialized)
-		_omap_map_io();
-}
-
-static inline unsigned int omap_serial_in(struct plat_serial8250_port *up,
-					  int offset)
-{
-	offset <<= up->regshift;
-	return (unsigned int)__raw_readb(up->membase + offset);
-}
-
-static inline void omap_serial_outp(struct plat_serial8250_port *p, int offset,
-				    int value)
-{
-	offset <<= p->regshift;
-	__raw_writeb(value, p->membase + offset);
-}
-
-/*
- * Internal UARTs need to be initialized for the 8250 autoconfig to work
- * properly. Note that the TX watermark initialization may not be needed
- * once the 8250.c watermark handling code is merged.
- */
-static void __init omap_serial_reset(struct plat_serial8250_port *p)
-{
-	omap_serial_outp(p, UART_OMAP_MDR1, 0x07);	/* disable UART */
-	omap_serial_outp(p, UART_OMAP_SCR, 0x08);	/* TX watermark */
-	omap_serial_outp(p, UART_OMAP_MDR1, 0x00);	/* enable UART */
-
-	if (!cpu_is_omap1510()) {
-		omap_serial_outp(p, UART_OMAP_SYSC, 0x01);
-		while (!(omap_serial_in(p, UART_OMAP_SYSC) & 0x01));
-	}
-}
-
-static struct plat_serial8250_port serial_platform_data[] = {
-	{
-		.membase	= (char*)IO_ADDRESS(OMAP_UART1_BASE),
-		.mapbase	= (unsigned long)OMAP_UART1_BASE,
-		.irq		= INT_UART1,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= OMAP16XX_BASE_BAUD * 16,
-	},
-	{
-		.membase	= (char*)IO_ADDRESS(OMAP_UART2_BASE),
-		.mapbase	= (unsigned long)OMAP_UART2_BASE,
-		.irq		= INT_UART2,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= OMAP16XX_BASE_BAUD * 16,
-	},
-	{
-		.membase	= (char*)IO_ADDRESS(OMAP_UART3_BASE),
-		.mapbase	= (unsigned long)OMAP_UART3_BASE,
-		.irq		= INT_UART3,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= OMAP16XX_BASE_BAUD * 16,
-	},
-	{ },
-};
-
-static struct platform_device serial_device = {
-	.name			= "serial8250",
-	.id			= 0,
-	.dev			= {
-		.platform_data	= serial_platform_data,
-	},
-};
-
-/*
- * Note that on Innovator-1510 UART2 pins conflict with USB2.
- * By default UART2 does not work on Innovator-1510 if you have
- * USB OHCI enabled. To use UART2, you must disable USB2 first.
- */
-void __init omap_serial_init(int ports[OMAP_MAX_NR_PORTS])
-{
-	int i;
-
-	if (cpu_is_omap730()) {
-		serial_platform_data[0].regshift = 0;
-		serial_platform_data[1].regshift = 0;
-		serial_platform_data[0].irq = INT_730_UART_MODEM_1;
-		serial_platform_data[1].irq = INT_730_UART_MODEM_IRDA_2;
-	}
-
-	if (cpu_is_omap1510()) {
-		serial_platform_data[0].uartclk = OMAP1510_BASE_BAUD * 16;
-		serial_platform_data[1].uartclk = OMAP1510_BASE_BAUD * 16;
-		serial_platform_data[2].uartclk = OMAP1510_BASE_BAUD * 16;
-	}
-
-	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
-		unsigned char reg;
-
-		if (ports[i] == 0) {
-			serial_platform_data[i].membase = 0;
-			serial_platform_data[i].mapbase = 0;
-			continue;
-		}
-
-		switch (i) {
-		case 0:
-			if (cpu_is_omap1510()) {
-				omap_cfg_reg(UART1_TX);
-				omap_cfg_reg(UART1_RTS);
-				if (machine_is_omap_innovator()) {
-					reg = fpga_read(OMAP1510_FPGA_POWER);
-					reg |= OMAP1510_FPGA_PCR_COM1_EN;
-					fpga_write(reg, OMAP1510_FPGA_POWER);
-					udelay(10);
-				}
-			}
-			break;
-		case 1:
-			if (cpu_is_omap1510()) {
-				omap_cfg_reg(UART2_TX);
-				omap_cfg_reg(UART2_RTS);
-				if (machine_is_omap_innovator()) {
-					reg = fpga_read(OMAP1510_FPGA_POWER);
-					reg |= OMAP1510_FPGA_PCR_COM2_EN;
-					fpga_write(reg, OMAP1510_FPGA_POWER);
-					udelay(10);
-				}
-			}
-			break;
-		case 2:
-			if (cpu_is_omap1510()) {
-				omap_cfg_reg(UART3_TX);
-				omap_cfg_reg(UART3_RX);
-			}
-			if (cpu_is_omap1710()) {
-				clk_enable(clk_get(0, "uart3_ck"));
-			}
-			break;
-		}
-		omap_serial_reset(&serial_platform_data[i]);
-	}
-}
-
-static int __init omap_init(void)
-{
-	return platform_device_register(&serial_device);
-}
-arch_initcall(omap_init);
-
-#define NO_LENGTH_CHECK 0xffffffff
-
-extern int omap_bootloader_tag_len;
-extern u8 omap_bootloader_tag[];
-
-struct omap_board_config_kernel *omap_board_config;
-int omap_board_config_size = 0;
-
-static const void *get_config(u16 tag, size_t len, int skip, size_t *len_out)
-{
-	struct omap_board_config_kernel *kinfo = NULL;
-	int i;
-
-#ifdef CONFIG_OMAP_BOOT_TAG
-	struct omap_board_config_entry *info = NULL;
-
-	if (omap_bootloader_tag_len > 4)
-		info = (struct omap_board_config_entry *) omap_bootloader_tag;
-	while (info != NULL) {
-		u8 *next;
-
-		if (info->tag == tag) {
-			if (skip == 0)
-				break;
-			skip--;
-		}
-
-		if ((info->len & 0x03) != 0) {
-			/* We bail out to avoid an alignment fault */
-			printk(KERN_ERR "OMAP peripheral config: Length (%d) not word-aligned (tag %04x)\n",
-			       info->len, info->tag);
-			return NULL;
-		}
-		next = (u8 *) info + sizeof(*info) + info->len;
-		if (next >= omap_bootloader_tag + omap_bootloader_tag_len)
-			info = NULL;
-		else
-			info = (struct omap_board_config_entry *) next;
-	}
-	if (info != NULL) {
-		/* Check the length as a lame attempt to check for
-		 * binary inconsistancy. */
-		if (len != NO_LENGTH_CHECK) {
-			/* Word-align len */
-			if (len & 0x03)
-				len = (len + 3) & ~0x03;
-			if (info->len != len) {
-				printk(KERN_ERR "OMAP peripheral config: Length mismatch with tag %x (want %d, got %d)\n",
-				       tag, len, info->len);
-				return NULL;
-			}
-		}
-		if (len_out != NULL)
-			*len_out = info->len;
-		return info->data;
-	}
-#endif
-	/* Try to find the config from the board-specific structures
-	 * in the kernel. */
-	for (i = 0; i < omap_board_config_size; i++) {
-		if (omap_board_config[i].tag == tag) {
-			kinfo = &omap_board_config[i];
-			break;
-		}
-	}
-	if (kinfo == NULL)
-		return NULL;
-	return kinfo->data;
-}
-
-const void *__omap_get_config(u16 tag, size_t len, int nr)
-{
-        return get_config(tag, len, nr, NULL);
-}
-EXPORT_SYMBOL(__omap_get_config);
-
-const void *omap_get_var_config(u16 tag, size_t *len)
-{
-        return get_config(tag, NO_LENGTH_CHECK, 0, len);
-}
-EXPORT_SYMBOL(omap_get_var_config);
-
-static int __init omap_add_serial_console(void)
-{
-	const struct omap_uart_config *info;
-
-	info = omap_get_config(OMAP_TAG_UART, struct omap_uart_config);
-	if (info != NULL && info->console_uart) {
-		static char speed[11], *opt = NULL;
-
-		if (info->console_speed) {
-			snprintf(speed, sizeof(speed), "%u", info->console_speed);
-			opt = speed;
-		}
-		return add_preferred_console("ttyS", info->console_uart - 1, opt);
-	}
-	return 0;
-}
-console_initcall(omap_add_serial_console);

arch/arm/mach-omap1/Kconfig

@@ -0,0 +1,144 @@
+comment "OMAP Core Type"
+	depends on ARCH_OMAP1
+
+config ARCH_OMAP730
+	depends on ARCH_OMAP1
+	bool "OMAP730 Based System"
+	select ARCH_OMAP_OTG
+
+config ARCH_OMAP1510
+	depends on ARCH_OMAP1
+	default y
+	bool "OMAP1510 Based System"
+
+config ARCH_OMAP16XX
+	depends on ARCH_OMAP1
+	bool "OMAP16xx Based System"
+	select ARCH_OMAP_OTG
+
+comment "OMAP Board Type"
+	depends on ARCH_OMAP1
+
+config MACH_OMAP_INNOVATOR
+	bool "TI Innovator"
+	depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX)
+	help
+          TI OMAP 1510 or 1610 Innovator board support. Say Y here if you
+          have such a board.
+
+config MACH_OMAP_H2
+	bool "TI H2 Support"
+	depends on ARCH_OMAP1 && ARCH_OMAP16XX
+    	help
+	  TI OMAP 1610/1611B H2 board support. Say Y here if you have such
+	  a board.
+
+config MACH_OMAP_H3
+	bool "TI H3 Support"
+	depends on ARCH_OMAP1 && ARCH_OMAP16XX
+    	help
+	  TI OMAP 1710 H3 board support. Say Y here if you have such
+	  a board.
+
+config MACH_OMAP_OSK
+	bool "TI OSK Support"
+	depends on ARCH_OMAP1 && ARCH_OMAP16XX
+    	help
+	  TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here
+          if you have such a board.
+
+config MACH_OMAP_PERSEUS2
+	bool "TI Perseus2"
+	depends on ARCH_OMAP1 && ARCH_OMAP730
+    	help
+	  Support for TI OMAP 730 Perseus2 board. Say Y here if you have such
+	  a board.
+
+config MACH_VOICEBLUE
+	bool "Voiceblue"
+	depends on ARCH_OMAP1 && ARCH_OMAP1510
+	help
+	  Support for Voiceblue GSM/VoIP gateway. Say Y here if you have
+	  such a board.
+
+config MACH_NETSTAR
+	bool "NetStar"
+	depends on ARCH_OMAP1 && ARCH_OMAP1510
+	help
+	  Support for NetStar PBX. Say Y here if you have such a board.
+
+config MACH_OMAP_GENERIC
+	bool "Generic OMAP board"
+	depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX)
+	help
+          Support for generic OMAP-1510, 1610 or 1710 board with
+          no FPGA. Can be used as template for porting Linux to
+          custom OMAP boards. Say Y here if you have a custom
+          board.
+
+comment "OMAP CPU Speed"
+	depends on ARCH_OMAP1
+
+config OMAP_CLOCKS_SET_BY_BOOTLOADER
+	bool "OMAP clocks set by bootloader"
+	depends on ARCH_OMAP1
+	help
+	  Enable this option to prevent the kernel from overriding the clock
+	  frequencies programmed by bootloader for MPU, DSP, MMUs, TC,
+	  internal LCD controller and MPU peripherals.
+
+config OMAP_ARM_216MHZ
+	bool "OMAP ARM 216 MHz CPU (1710 only)"
+        depends on ARCH_OMAP1 && ARCH_OMAP16XX
+        help
+          Enable 216 MHz clock for OMAP1710 CPU. If unsure, say N.
+
+config OMAP_ARM_195MHZ
+	bool "OMAP ARM 195 MHz CPU"
+	depends on ARCH_OMAP1 && ARCH_OMAP730
+	help
+          Enable 195MHz clock for OMAP CPU. If unsure, say N.
+
+config OMAP_ARM_192MHZ
+	bool "OMAP ARM 192 MHz CPU"
+	depends on ARCH_OMAP1 && ARCH_OMAP16XX
+	help
+          Enable 192MHz clock for OMAP CPU. If unsure, say N.
+
+config OMAP_ARM_182MHZ
+	bool "OMAP ARM 182 MHz CPU"
+	depends on ARCH_OMAP1 && ARCH_OMAP730
+	help
+          Enable 182MHz clock for OMAP CPU. If unsure, say N.
+
+config OMAP_ARM_168MHZ
+	bool "OMAP ARM 168 MHz CPU"
+	depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730)
+	help
+          Enable 168MHz clock for OMAP CPU. If unsure, say N.
+
+config OMAP_ARM_150MHZ
+	bool "OMAP ARM 150 MHz CPU"
+	depends on ARCH_OMAP1 && ARCH_OMAP1510
+	help
+	  Enable 150MHz clock for OMAP CPU. If unsure, say N.
+
+config OMAP_ARM_120MHZ
+	bool "OMAP ARM 120 MHz CPU"
+	depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730)
+	help
+          Enable 120MHz clock for OMAP CPU. If unsure, say N.
+
+config OMAP_ARM_60MHZ
+	bool "OMAP ARM 60 MHz CPU"
+	depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730)
+        default y
+	help
+          Enable 60MHz clock for OMAP CPU. If unsure, say Y.
+
+config OMAP_ARM_30MHZ
+	bool "OMAP ARM 30 MHz CPU"
+	depends on ARCH_OMAP1 && (ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730)
+	help
+          Enable 30MHz clock for OMAP CPU. If unsure, say N.
+

arch/arm/mach-omap1/Makefile

@@ -0,0 +1,30 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Common support
+obj-y := io.o id.o irq.o time.o serial.o
+led-y := leds.o
+
+# Specific board support
+obj-$(CONFIG_MACH_OMAP_H2)		+= board-h2.o
+obj-$(CONFIG_MACH_OMAP_INNOVATOR)	+= board-innovator.o
+obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
+obj-$(CONFIG_MACH_OMAP_PERSEUS2)	+= board-perseus2.o
+obj-$(CONFIG_MACH_OMAP_OSK)		+= board-osk.o
+obj-$(CONFIG_MACH_OMAP_H3)		+= board-h3.o
+obj-$(CONFIG_MACH_VOICEBLUE)		+= board-voiceblue.o
+obj-$(CONFIG_MACH_NETSTAR)		+= board-netstar.o
+
+ifeq ($(CONFIG_ARCH_OMAP1510),y)
+# Innovator-1510 FPGA
+obj-$(CONFIG_MACH_OMAP_INNOVATOR)	+= fpga.o
+endif
+
+# LEDs support
+led-$(CONFIG_MACH_OMAP_H2)		+= leds-h2p2-debug.o
+led-$(CONFIG_MACH_OMAP_INNOVATOR)	+= leds-innovator.o
+led-$(CONFIG_MACH_OMAP_PERSEUS2)	+= leds-h2p2-debug.o
+led-$(CONFIG_MACH_OMAP_OSK)		+= leds-osk.o
+obj-$(CONFIG_LEDS)			+= $(led-y)
+

arch/arm/mach-omap/Makefile.boot → arch/arm/mach-omap1/Makefile.boot

@@ -1,4 +1,3 @@
    zreladdr-y		:= 0x10008000
 params_phys-y		:= 0x10000100
 initrd_phys-y		:= 0x10800000
-

arch/arm/mach-omap/board-generic.c → arch/arm/mach-omap1/board-generic.c

@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-omap/board-generic.c
+ * linux/arch/arm/mach-omap1/board-generic.c
  *
  * Modified from board-innovator1510.c
  *
@@ -26,8 +26,7 @@
 #include <asm/arch/mux.h>
 #include <asm/arch/usb.h>
 #include <asm/arch/board.h>
-
-#include "common.h"
+#include <asm/arch/common.h>
 
 static int __initdata generic_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
 
@@ -84,7 +83,7 @@ static void __init omap_generic_init(void)
 
 static void __init omap_generic_map_io(void)
 {
-	omap_map_io();
+	omap_map_common_io()
 }
 
 MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")

arch/arm/mach-omap/board-h2.c → arch/arm/mach-omap1/board-h2.c

@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-omap/board-h2.c
+ * linux/arch/arm/mach-omap1/board-h2.c
  *
  * Board specific inits for OMAP-1610 H2
  *
@@ -35,8 +35,7 @@
 #include <asm/arch/gpio.h>
 #include <asm/arch/tc.h>
 #include <asm/arch/usb.h>
-
-#include "common.h"
+#include <asm/arch/common.h>
 
 extern int omap_gpio_init(void);
 
@@ -172,7 +171,7 @@ static void __init h2_init(void)
 
 static void __init h2_map_io(void)
 {
-	omap_map_io();
+	omap_map_common_io();
 	omap_serial_init(h2_serial_ports);
 }
 

arch/arm/mach-omap/board-h3.c → arch/arm/mach-omap1/board-h3.c

@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-omap/board-h3.c
+ * linux/arch/arm/mach-omap1/board-h3.c
  *
  * This file contains OMAP1710 H3 specific code.
  *
@@ -37,8 +37,7 @@
 #include <asm/arch/mux.h>
 #include <asm/arch/tc.h>
 #include <asm/arch/usb.h>
-
-#include "common.h"
+#include <asm/arch/common.h>
 
 extern int omap_gpio_init(void);
 
@@ -190,7 +189,7 @@ void h3_init_irq(void)
 
 static void __init h3_map_io(void)
 {
-	omap_map_io();
+	omap_map_common_io();
 	omap_serial_init(h3_serial_ports);
 }
 

arch/arm/mach-omap/board-innovator.c → arch/arm/mach-omap1/board-innovator.c

@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-omap/board-innovator.c
+ * linux/arch/arm/mach-omap1/board-innovator.c
  *
  * Board specific inits for OMAP-1510 and OMAP-1610 Innovator
  *
@@ -33,8 +33,7 @@
 #include <asm/arch/gpio.h>
 #include <asm/arch/tc.h>
 #include <asm/arch/usb.h>
-
-#include "common.h"
+#include <asm/arch/common.h>
 
 static int __initdata innovator_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
 
@@ -252,7 +251,7 @@ static void __init innovator_init(void)
 
 static void __init innovator_map_io(void)
 {
-	omap_map_io();
+	omap_map_common_io();
 
 #ifdef CONFIG_ARCH_OMAP1510
 	if (cpu_is_omap1510()) {

arch/arm/mach-omap/board-netstar.c → arch/arm/mach-omap1/board-netstar.c

@@ -26,8 +26,7 @@
 #include <asm/arch/gpio.h>
 #include <asm/arch/mux.h>
 #include <asm/arch/usb.h>
-
-#include "common.h"
+#include <asm/arch/common.h>
 
 extern void __init omap_init_time(void);
 extern int omap_gpio_init(void);
@@ -100,7 +99,7 @@ static int __initdata omap_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
 
 static void __init netstar_map_io(void)
 {
-	omap_map_io();
+	omap_map_common_io();
 	omap_serial_init(omap_serial_ports);
 }
 

arch/arm/mach-omap/board-osk.c → arch/arm/mach-omap1/board-osk.c

@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-omap/board-osk.c
+ * linux/arch/arm/mach-omap1/board-osk.c
  *
  * Board specific init for OMAP5912 OSK
  *
@@ -39,8 +39,7 @@
 #include <asm/arch/usb.h>
 #include <asm/arch/mux.h>
 #include <asm/arch/tc.h>
-
-#include "common.h"
+#include <asm/arch/common.h>
 
 static struct map_desc osk5912_io_desc[] __initdata = {
 { OMAP_OSK_NOR_FLASH_BASE, OMAP_OSK_NOR_FLASH_START, OMAP_OSK_NOR_FLASH_SIZE,
@@ -153,7 +152,7 @@ static void __init osk_init(void)
 
 static void __init osk_map_io(void)
 {
-	omap_map_io();
+	omap_map_common_io();
 	iotable_init(osk5912_io_desc, ARRAY_SIZE(osk5912_io_desc));
 	omap_serial_init(osk_serial_ports);
 }

arch/arm/mach-omap/board-perseus2.c → arch/arm/mach-omap1/board-perseus2.c

@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-omap/board-perseus2.c
+ * linux/arch/arm/mach-omap1/board-perseus2.c
  *
  * Modified from board-generic.c
  *
@@ -27,8 +27,7 @@
 #include <asm/arch/gpio.h>
 #include <asm/arch/mux.h>
 #include <asm/arch/fpga.h>
-
-#include "common.h"
+#include <asm/arch/common.h>
 
 static struct resource smc91x_resources[] = {
 	[0] = {
@@ -140,7 +139,7 @@ static struct map_desc omap_perseus2_io_desc[] __initdata = {
 
 static void __init omap_perseus2_map_io(void)
 {
-	omap_map_io();
+	omap_map_common_io();
 	iotable_init(omap_perseus2_io_desc,
 		     ARRAY_SIZE(omap_perseus2_io_desc));
 

arch/arm/mach-omap/board-voiceblue.c → arch/arm/mach-omap1/board-voiceblue.c

@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-omap/board-voiceblue.c
+ * linux/arch/arm/mach-omap1/board-voiceblue.c
  *
  * Modified from board-generic.c
  *
@@ -31,8 +31,7 @@
 #include <asm/arch/tc.h>
 #include <asm/arch/mux.h>
 #include <asm/arch/usb.h>
-
-#include "common.h"
+#include <asm/arch/common.h>
 
 extern void omap_init_time(void);
 extern int omap_gpio_init(void);
@@ -170,7 +169,7 @@ static int __initdata omap_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
 
 static void __init voiceblue_map_io(void)
 {
-	omap_map_io();
+	omap_map_common_io();
 	omap_serial_init(omap_serial_ports);
 }