Merge branch 'dev/removing-s5p6442' into for-next

Documentation/arm/Samsung/Overview.txt

@@ -14,7 +14,6 @@ Introduction
   - S3C24XX: See Documentation/arm/Samsung-S3C24XX/Overview.txt for full list
   - S3C64XX: S3C6400 and S3C6410
   - S5P6440
-  - S5P6442
   - S5PC100
   - S5PC110 / S5PV210
 
@@ -36,7 +35,6 @@ Configuration
   unifying all the SoCs into one kernel.
 
   s5p6440_defconfig - S5P6440 specific default configuration
-  s5p6442_defconfig - S5P6442 specific default configuration
   s5pc100_defconfig - S5PC100 specific default configuration
   s5pc110_defconfig - S5PC110 specific default configuration
   s5pv210_defconfig - S5PV210 specific default configuration

Documentation/flexible-arrays.txt

@@ -66,10 +66,10 @@ trick is to ensure that any needed memory allocations are done before
 entering atomic context, using:
 
     int flex_array_prealloc(struct flex_array *array, unsigned int start,
-			    unsigned int end, gfp_t flags);
+			    unsigned int nr_elements, gfp_t flags);
 
 This function will ensure that memory for the elements indexed in the range
-defined by start and end has been allocated.  Thereafter, a
+defined by start and nr_elements has been allocated.  Thereafter, a
 flex_array_put() call on an element in that range is guaranteed not to
 block.
 

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 39
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc7
 NAME = Flesh-Eating Bats with Fangs
 
 # *DOCUMENTATION*

arch/arm/Kconfig

@@ -736,16 +736,6 @@ config ARCH_S5P64X0
 	  Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440,
 	  SMDK6450.
 
-config ARCH_S5P6442
-	bool "Samsung S5P6442"
-	select CPU_V6
-	select GENERIC_GPIO
-	select HAVE_CLK
-	select ARCH_USES_GETTIMEOFFSET
-	select HAVE_S3C2410_WATCHDOG if WATCHDOG
-	help
-	  Samsung S5P6442 CPU based systems
-
 config ARCH_S5PC100
 	bool "Samsung S5PC100"
 	select GENERIC_GPIO
@@ -995,8 +985,6 @@ endif
 
 source "arch/arm/mach-s5p64x0/Kconfig"
 
-source "arch/arm/mach-s5p6442/Kconfig"
-
 source "arch/arm/mach-s5pc100/Kconfig"
 
 source "arch/arm/mach-s5pv210/Kconfig"
@@ -1424,7 +1412,7 @@ source kernel/Kconfig.preempt
 config HZ
 	int
 	default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P64X0 || \
-		ARCH_S5P6442 || ARCH_S5PV210 || ARCH_EXYNOS4
+		ARCH_S5PV210 || ARCH_EXYNOS4
 	default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
 	default AT91_TIMER_HZ if ARCH_AT91
 	default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE
@@ -2010,7 +1998,7 @@ menu "Power management options"
 source "kernel/power/Kconfig"
 
 config ARCH_SUSPEND_POSSIBLE
-	depends on !ARCH_S5P64X0 && !ARCH_S5P6442
+	depends on !ARCH_S5P64X0
 	depends on CPU_ARM920T || CPU_ARM926T || CPU_SA1100 || \
 		CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE
 	def_bool y

arch/arm/Makefile

@@ -178,7 +178,6 @@ machine-$(CONFIG_ARCH_S3C2410)		:= s3c2410 s3c2400 s3c2412 s3c2416 s3c2440 s3c24
 machine-$(CONFIG_ARCH_S3C24A0)		:= s3c24a0
 machine-$(CONFIG_ARCH_S3C64XX)		:= s3c64xx
 machine-$(CONFIG_ARCH_S5P64X0)		:= s5p64x0
-machine-$(CONFIG_ARCH_S5P6442)		:= s5p6442
 machine-$(CONFIG_ARCH_S5PC100)		:= s5pc100
 machine-$(CONFIG_ARCH_S5PV210)		:= s5pv210
 machine-$(CONFIG_ARCH_EXYNOS4)		:= exynos4

arch/arm/common/Kconfig

@@ -7,7 +7,7 @@ config ARM_VIC
 config ARM_VIC_NR
 	int
 	default 4 if ARCH_S5PV210
-	default 3 if ARCH_S5P6442 || ARCH_S5PC100
+	default 3 if ARCH_S5PC100
 	default 2
 	depends on ARM_VIC
 	help

arch/arm/configs/at91x40_defconfig

@@ -0,0 +1,48 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_EMBEDDED=y
+# CONFIG_HOTPLUG is not set
+# CONFIG_ELF_CORE is not set
+# CONFIG_FUTEX is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_MMU is not set
+CONFIG_ARCH_AT91=y
+CONFIG_ARCH_AT91X40=y
+CONFIG_MACH_AT91EB01=y
+CONFIG_AT91_EARLY_USART0=y
+CONFIG_CPU_ARM7TDMI=y
+CONFIG_SET_MEM_PARAM=y
+CONFIG_DRAM_BASE=0x01000000
+CONFIG_DRAM_SIZE=0x00400000
+CONFIG_FLASH_MEM_BASE=0x01400000
+CONFIG_PROCESSOR_ID=0x14000040
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_BINFMT_FLAT=y
+# CONFIG_SUSPEND is not set
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=y
+CONFIG_BLK_DEV_RAM=y
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_ENABLE_MUST_CHECK is not set

arch/arm/configs/s5p6442_defconfig

@@ -1,65 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_S5P6442=y
-CONFIG_S3C_LOWLEVEL_UART_PORT=1
-CONFIG_MACH_SMDK6442=y
-CONFIG_CPU_32v6K=y
-CONFIG_AEABI=y
-CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
-CONFIG_FPE_NWFPE=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_HW_RANDOM=y
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CRAMFS=y
-CONFIG_ROMFS_FS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_ARM_UNWIND is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_S3C_UART=1
-CONFIG_CRC_CCITT=y

arch/arm/kernel/ptrace.c

@@ -767,12 +767,20 @@ long arch_ptrace(struct task_struct *child, long request,
 
 #ifdef CONFIG_HAVE_HW_BREAKPOINT
 		case PTRACE_GETHBPREGS:
+			if (ptrace_get_breakpoints(child) < 0)
+				return -ESRCH;
+
 			ret = ptrace_gethbpregs(child, addr,
 						(unsigned long __user *)data);
+			ptrace_put_breakpoints(child);
 			break;
 		case PTRACE_SETHBPREGS:
+			if (ptrace_get_breakpoints(child) < 0)
+				return -ESRCH;
+
 			ret = ptrace_sethbpregs(child, addr,
 						(unsigned long __user *)data);
+			ptrace_put_breakpoints(child);
 			break;
 #endif
 

arch/arm/mach-at91/Kconfig

@@ -83,6 +83,7 @@ config ARCH_AT91CAP9
 	select CPU_ARM926T
 	select GENERIC_CLOCKEVENTS
 	select HAVE_FB_ATMEL
+	select HAVE_NET_MACB
 
 config ARCH_AT572D940HF
 	bool "AT572D940HF"

arch/arm/mach-at91/board-eb01.c

@@ -30,6 +30,11 @@
 #include <mach/board.h>
 #include "generic.h"
 
+static void __init at91eb01_init_irq(void)
+{
+	at91x40_init_interrupts(NULL);
+}
+
 static void __init at91eb01_map_io(void)
 {
 	at91x40_initialize(40000000);
@@ -38,7 +43,7 @@ static void __init at91eb01_map_io(void)
 MACHINE_START(AT91EB01, "Atmel AT91 EB01")
 	/* Maintainer: Greg Ungerer <gerg@snapgear.com> */
 	.timer		= &at91x40_timer,
-	.init_irq	= at91x40_init_interrupts,
+	.init_irq	= at91eb01_init_irq,
 	.map_io		= at91eb01_map_io,
 MACHINE_END
 

arch/arm/mach-at91/include/mach/cpu.h

@@ -27,6 +27,7 @@
 #define ARCH_ID_AT91SAM9G45	0x819b05a0
 #define ARCH_ID_AT91SAM9G45MRL	0x819b05a2	/* aka 9G45-ES2 & non ES lots */
 #define ARCH_ID_AT91SAM9G45ES	0x819b05a1	/* 9G45-ES (Engineering Sample) */
+#define ARCH_ID_AT91SAM9X5	0x819a05a0
 #define ARCH_ID_AT91CAP9	0x039A03A0
 
 #define ARCH_ID_AT91SAM9XE128	0x329973a0
@@ -55,6 +56,12 @@ static inline unsigned long at91_cpu_fully_identify(void)
 #define ARCH_EXID_AT91SAM9G46	0x00000003
 #define ARCH_EXID_AT91SAM9G45	0x00000004
 
+#define ARCH_EXID_AT91SAM9G15	0x00000000
+#define ARCH_EXID_AT91SAM9G35	0x00000001
+#define ARCH_EXID_AT91SAM9X35	0x00000002
+#define ARCH_EXID_AT91SAM9G25	0x00000003
+#define ARCH_EXID_AT91SAM9X25	0x00000004
+
 static inline unsigned long at91_exid_identify(void)
 {
 	return at91_sys_read(AT91_DBGU_EXID);
@@ -143,6 +150,27 @@ static inline unsigned long at91cap9_rev_identify(void)
 #define cpu_is_at91sam9m11()	(0)
 #endif
 
+#ifdef CONFIG_ARCH_AT91SAM9X5
+#define cpu_is_at91sam9x5()	(at91_cpu_identify() == ARCH_ID_AT91SAM9X5)
+#define cpu_is_at91sam9g15()	(cpu_is_at91sam9x5() && \
+				(at91_exid_identify() == ARCH_EXID_AT91SAM9G15))
+#define cpu_is_at91sam9g35()	(cpu_is_at91sam9x5() && \
+				(at91_exid_identify() == ARCH_EXID_AT91SAM9G35))
+#define cpu_is_at91sam9x35()	(cpu_is_at91sam9x5() && \
+				(at91_exid_identify() == ARCH_EXID_AT91SAM9X35))
+#define cpu_is_at91sam9g25()	(cpu_is_at91sam9x5() && \
+				(at91_exid_identify() == ARCH_EXID_AT91SAM9G25))
+#define cpu_is_at91sam9x25()	(cpu_is_at91sam9x5() && \
+				(at91_exid_identify() == ARCH_EXID_AT91SAM9X25))
+#else
+#define cpu_is_at91sam9x5()	(0)
+#define cpu_is_at91sam9g15()	(0)
+#define cpu_is_at91sam9g35()	(0)
+#define cpu_is_at91sam9x35()	(0)
+#define cpu_is_at91sam9g25()	(0)
+#define cpu_is_at91sam9x25()	(0)
+#endif
+
 #ifdef CONFIG_ARCH_AT91CAP9
 #define cpu_is_at91cap9()	(at91_cpu_identify() == ARCH_ID_AT91CAP9)
 #define cpu_is_at91cap9_revB()	(at91cap9_rev_identify() == ARCH_REVISION_CAP9_B)

arch/arm/mach-s5p6442/Kconfig

@@ -1,25 +0,0 @@
-# arch/arm/mach-s5p6442/Kconfig
-#
-# Copyright (c) 2010 Samsung Electronics Co., Ltd.
-#		http://www.samsung.com/
-#
-# Licensed under GPLv2
-
-# Configuration options for the S5P6442
-
-if ARCH_S5P6442
-
-config CPU_S5P6442
-	bool
-	select S3C_PL330_DMA
-	help
-	  Enable S5P6442 CPU support
-
-config MACH_SMDK6442
-	bool "SMDK6442"
-	select CPU_S5P6442
-	select S3C_DEV_WDT
-	help
-	  Machine support for Samsung SMDK6442
-
-endif

arch/arm/mach-s5p6442/Makefile

@@ -1,24 +0,0 @@
-# arch/arm/mach-s5p6442/Makefile
-#
-# Copyright (c) 2010 Samsung Electronics Co., Ltd.
-# 		http://www.samsung.com/
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:=
-obj-				:=
-
-# Core support for S5P6442 system
-
-obj-$(CONFIG_CPU_S5P6442)	+= cpu.o init.o clock.o dma.o
-obj-$(CONFIG_CPU_S5P6442)	+= setup-i2c0.o
-
-# machine support
-
-obj-$(CONFIG_MACH_SMDK6442)	+= mach-smdk6442.o
-
-# device support
-obj-y				+= dev-audio.o
-obj-$(CONFIG_S3C64XX_DEV_SPI)	+= dev-spi.o

arch/arm/mach-s5p6442/Makefile.boot

@@ -1,2 +0,0 @@
-   zreladdr-y	:= 0x20008000
-params_phys-y	:= 0x20000100

arch/arm/mach-s5p6442/clock.c

@@ -1,420 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/clock.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P6442 - Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/map.h>
-
-#include <plat/cpu-freq.h>
-#include <mach/regs-clock.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/s5p-clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/s5p6442.h>
-
-static struct clksrc_clk clk_mout_apll = {
-	.clk	= {
-		.name		= "mout_apll",
-		.id		= -1,
-	},
-	.sources	= &clk_src_apll,
-	.reg_src	= { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 },
-};
-
-static struct clksrc_clk clk_mout_mpll = {
-	.clk = {
-		.name		= "mout_mpll",
-		.id		= -1,
-	},
-	.sources	= &clk_src_mpll,
-	.reg_src	= { .reg = S5P_CLK_SRC0, .shift = 4, .size = 1 },
-};
-
-static struct clksrc_clk clk_mout_epll = {
-	.clk	= {
-		.name		= "mout_epll",
-		.id		= -1,
-	},
-	.sources	= &clk_src_epll,
-	.reg_src	= { .reg = S5P_CLK_SRC0, .shift = 8, .size = 1 },
-};
-
-/* Possible clock sources for ARM Mux */
-static struct clk *clk_src_arm_list[] = {
-	[1] = &clk_mout_apll.clk,
-	[2] = &clk_mout_mpll.clk,
-};
-
-static struct clksrc_sources clk_src_arm = {
-	.sources	= clk_src_arm_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_arm_list),
-};
-
-static struct clksrc_clk clk_mout_arm = {
-	.clk	= {
-		.name		= "mout_arm",
-		.id		= -1,
-	},
-	.sources	= &clk_src_arm,
-	.reg_src	= { .reg = S5P_CLK_MUX_STAT0, .shift = 16, .size = 3 },
-};
-
-static struct clk clk_dout_a2m = {
-	.name		= "dout_a2m",
-	.id		= -1,
-	.parent		= &clk_mout_apll.clk,
-};
-
-/* Possible clock sources for D0 Mux */
-static struct clk *clk_src_d0_list[] = {
-	[1] = &clk_mout_mpll.clk,
-	[2] = &clk_dout_a2m,
-};
-
-static struct clksrc_sources clk_src_d0 = {
-	.sources	= clk_src_d0_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_d0_list),
-};
-
-static struct clksrc_clk clk_mout_d0 = {
-	.clk = {
-		.name		= "mout_d0",
-		.id		= -1,
-	},
-	.sources	= &clk_src_d0,
-	.reg_src	= { .reg = S5P_CLK_MUX_STAT0, .shift = 20, .size = 3 },
-};
-
-static struct clk clk_dout_apll = {
-	.name		= "dout_apll",
-	.id		= -1,
-	.parent		= &clk_mout_arm.clk,
-};
-
-/* Possible clock sources for D0SYNC Mux */
-static struct clk *clk_src_d0sync_list[] = {
-	[1] = &clk_mout_d0.clk,
-	[2] = &clk_dout_apll,
-};
-
-static struct clksrc_sources clk_src_d0sync = {
-	.sources	= clk_src_d0sync_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_d0sync_list),
-};
-
-static struct clksrc_clk clk_mout_d0sync = {
-	.clk	= {
-		.name		= "mout_d0sync",
-		.id		= -1,
-	},
-	.sources	= &clk_src_d0sync,
-	.reg_src	= { .reg = S5P_CLK_MUX_STAT1, .shift = 28, .size = 3 },
-};
-
-/* Possible clock sources for D1 Mux */
-static struct clk *clk_src_d1_list[] = {
-	[1] = &clk_mout_mpll.clk,
-	[2] = &clk_dout_a2m,
-};
-
-static struct clksrc_sources clk_src_d1 = {
-	.sources	= clk_src_d1_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_d1_list),
-};
-
-static struct clksrc_clk clk_mout_d1 = {
-	.clk	= {
-		.name		= "mout_d1",
-		.id		= -1,
-	},
-	.sources	= &clk_src_d1,
-	.reg_src	= { .reg = S5P_CLK_MUX_STAT0, .shift = 24, .size = 3 },
-};
-
-/* Possible clock sources for D1SYNC Mux */
-static struct clk *clk_src_d1sync_list[] = {
-	[1] = &clk_mout_d1.clk,
-	[2] = &clk_dout_apll,
-};
-
-static struct clksrc_sources clk_src_d1sync = {
-	.sources	= clk_src_d1sync_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_d1sync_list),
-};
-
-static struct clksrc_clk clk_mout_d1sync = {
-	.clk	= {
-		.name		= "mout_d1sync",
-		.id		= -1,
-	},
-	.sources	= &clk_src_d1sync,
-	.reg_src	= { .reg = S5P_CLK_MUX_STAT1, .shift = 24, .size = 3 },
-};
-
-static struct clk clk_hclkd0 = {
-	.name		= "hclkd0",
-	.id		= -1,
-	.parent		= &clk_mout_d0sync.clk,
-};
-
-static struct clk clk_hclkd1 = {
-	.name		= "hclkd1",
-	.id		= -1,
-	.parent		= &clk_mout_d1sync.clk,
-};
-
-static struct clk clk_pclkd0 = {
-	.name		= "pclkd0",
-	.id		= -1,
-	.parent		= &clk_hclkd0,
-};
-
-static struct clk clk_pclkd1 = {
-	.name		= "pclkd1",
-	.id		= -1,
-	.parent		= &clk_hclkd1,
-};
-
-int s5p6442_clk_ip0_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLKGATE_IP0, clk, enable);
-}
-
-int s5p6442_clk_ip3_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLKGATE_IP3, clk, enable);
-}
-
-static struct clksrc_clk clksrcs[] = {
-	{
-		.clk	= {
-			.name		= "dout_a2m",
-			.id		= -1,
-			.parent		= &clk_mout_apll.clk,
-		},
-		.sources = &clk_src_apll,
-		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 },
-		.reg_div = { .reg = S5P_CLK_DIV0, .shift = 4, .size = 3 },
-	}, {
-		.clk	= {
-			.name		= "dout_apll",
-			.id		= -1,
-			.parent		= &clk_mout_arm.clk,
-		},
-		.sources = &clk_src_arm,
-		.reg_src = { .reg = S5P_CLK_MUX_STAT0, .shift = 16, .size = 3 },
-		.reg_div = { .reg = S5P_CLK_DIV0, .shift = 0, .size = 3 },
-	}, {
-		.clk	= {
-			.name		= "hclkd1",
-			.id		= -1,
-			.parent		= &clk_mout_d1sync.clk,
-		},
-		.sources = &clk_src_d1sync,
-		.reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 24, .size = 3 },
-		.reg_div = { .reg = S5P_CLK_DIV0, .shift = 24, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "hclkd0",
-			.id		= -1,
-			.parent		= &clk_mout_d0sync.clk,
-		},
-		.sources = &clk_src_d0sync,
-		.reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 28, .size = 3 },
-		.reg_div = { .reg = S5P_CLK_DIV0, .shift = 16, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "pclkd0",
-			.id		= -1,
-			.parent		= &clk_hclkd0,
-		},
-		.sources = &clk_src_d0sync,
-		.reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 28, .size = 3 },
-		.reg_div = { .reg = S5P_CLK_DIV0, .shift = 20, .size = 3 },
-	}, {
-		.clk	= {
-			.name		= "pclkd1",
-			.id		= -1,
-			.parent		= &clk_hclkd1,
-		},
-		.sources = &clk_src_d1sync,
-		.reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 24, .size = 3 },
-		.reg_div = { .reg = S5P_CLK_DIV0, .shift = 28, .size = 3 },
-	}
-};
-
-/* Clock initialisation code */
-static struct clksrc_clk *init_parents[] = {
-	&clk_mout_apll,
-	&clk_mout_mpll,
-	&clk_mout_epll,
-	&clk_mout_arm,
-	&clk_mout_d0,
-	&clk_mout_d0sync,
-	&clk_mout_d1,
-	&clk_mout_d1sync,
-};
-
-void __init_or_cpufreq s5p6442_setup_clocks(void)
-{
-	struct clk *pclkd0_clk;
-	struct clk *pclkd1_clk;
-
-	unsigned long xtal;
-	unsigned long arm;
-	unsigned long hclkd0 = 0;
-	unsigned long hclkd1 = 0;
-	unsigned long pclkd0 = 0;
-	unsigned long pclkd1 = 0;
-
-	unsigned long apll;
-	unsigned long mpll;
-	unsigned long epll;
-	unsigned int ptr;
-
-	printk(KERN_DEBUG "%s: registering clocks\n", __func__);
-
-	xtal = clk_get_rate(&clk_xtal);
-
-	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
-
-	apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4508);
-	mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502);
-	epll = s5p_get_pll45xx(xtal, __raw_readl(S5P_EPLL_CON), pll_4500);
-
-	printk(KERN_INFO "S5P6442: PLL settings, A=%ld, M=%ld, E=%ld",
-			apll, mpll, epll);
-
-	clk_fout_apll.rate = apll;
-	clk_fout_mpll.rate = mpll;
-	clk_fout_epll.rate = epll;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
-		s3c_set_clksrc(init_parents[ptr], true);
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
-		s3c_set_clksrc(&clksrcs[ptr], true);
-
-	arm = clk_get_rate(&clk_dout_apll);
-	hclkd0 = clk_get_rate(&clk_hclkd0);
-	hclkd1 = clk_get_rate(&clk_hclkd1);
-
-	pclkd0_clk = clk_get(NULL, "pclkd0");
-	BUG_ON(IS_ERR(pclkd0_clk));
-
-	pclkd0 = clk_get_rate(pclkd0_clk);
-	clk_put(pclkd0_clk);
-
-	pclkd1_clk = clk_get(NULL, "pclkd1");
-	BUG_ON(IS_ERR(pclkd1_clk));
-
-	pclkd1 = clk_get_rate(pclkd1_clk);
-	clk_put(pclkd1_clk);
-
-	printk(KERN_INFO "S5P6442: HCLKD0=%ld, HCLKD1=%ld, PCLKD0=%ld, PCLKD1=%ld\n",
-			hclkd0, hclkd1, pclkd0, pclkd1);
-
-	/* For backward compatibility */
-	clk_f.rate = arm;
-	clk_h.rate = hclkd1;
-	clk_p.rate = pclkd1;
-
-	clk_pclkd0.rate = pclkd0;
-	clk_pclkd1.rate = pclkd1;
-}
-
-static struct clk init_clocks_off[] = {
-	{
-		.name		= "pdma",
-		.id		= -1,
-		.parent		= &clk_pclkd1,
-		.enable		= s5p6442_clk_ip0_ctrl,
-		.ctrlbit	= (1 << 3),
-	},
-};
-
-static struct clk init_clocks[] = {
-	{
-		.name		= "systimer",
-		.id		= -1,
-		.parent		= &clk_pclkd1,
-		.enable		= s5p6442_clk_ip3_ctrl,
-		.ctrlbit	= (1<<16),
-	}, {
-		.name		= "uart",
-		.id		= 0,
-		.parent		= &clk_pclkd1,
-		.enable		= s5p6442_clk_ip3_ctrl,
-		.ctrlbit	= (1<<17),
-	}, {
-		.name		= "uart",
-		.id		= 1,
-		.parent		= &clk_pclkd1,
-		.enable		= s5p6442_clk_ip3_ctrl,
-		.ctrlbit	= (1<<18),
-	}, {
-		.name		= "uart",
-		.id		= 2,
-		.parent		= &clk_pclkd1,
-		.enable		= s5p6442_clk_ip3_ctrl,
-		.ctrlbit	= (1<<19),
-	}, {
-		.name		= "watchdog",
-		.id		= -1,
-		.parent		= &clk_pclkd1,
-		.enable		= s5p6442_clk_ip3_ctrl,
-		.ctrlbit	= (1 << 22),
-	}, {
-		.name		= "timers",
-		.id		= -1,
-		.parent		= &clk_pclkd1,
-		.enable		= s5p6442_clk_ip3_ctrl,
-		.ctrlbit	= (1<<23),
-	},
-};
-
-static struct clk *clks[] __initdata = {
-	&clk_ext,
-	&clk_epll,
-	&clk_mout_apll.clk,
-	&clk_mout_mpll.clk,
-	&clk_mout_epll.clk,
-	&clk_mout_d0.clk,
-	&clk_mout_d0sync.clk,
-	&clk_mout_d1.clk,
-	&clk_mout_d1sync.clk,
-	&clk_hclkd0,
-	&clk_pclkd0,
-	&clk_hclkd1,
-	&clk_pclkd1,
-};
-
-void __init s5p6442_register_clocks(void)
-{
-	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
-	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
-	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
-
-	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-
-	s3c_pwmclk_init();
-}

arch/arm/mach-s5p6442/cpu.c

@@ -1,143 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/cpu.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/sysdev.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/sched.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/proc-fns.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <asm/irq.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-#include <plat/s5p6442.h>
-
-/* Initial IO mappings */
-
-static struct map_desc s5p6442_iodesc[] __initdata = {
-	{
-		.virtual	= (unsigned long)S5P_VA_SYSTIMER,
-		.pfn		= __phys_to_pfn(S5P6442_PA_SYSTIMER),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_GPIO,
-		.pfn		= __phys_to_pfn(S5P6442_PA_GPIO),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)VA_VIC0,
-		.pfn		= __phys_to_pfn(S5P6442_PA_VIC0),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)VA_VIC1,
-		.pfn		= __phys_to_pfn(S5P6442_PA_VIC1),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)VA_VIC2,
-		.pfn		= __phys_to_pfn(S5P6442_PA_VIC2),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_UART,
-		.pfn		= __phys_to_pfn(S3C_PA_UART),
-		.length		= SZ_512K,
-		.type		= MT_DEVICE,
-	}
-};
-
-static void s5p6442_idle(void)
-{
-	if (!need_resched())
-		cpu_do_idle();
-
-	local_irq_enable();
-}
-
-/*
- * s5p6442_map_io
- *
- * register the standard cpu IO areas
- */
-
-void __init s5p6442_map_io(void)
-{
-	iotable_init(s5p6442_iodesc, ARRAY_SIZE(s5p6442_iodesc));
-}
-
-void __init s5p6442_init_clocks(int xtal)
-{
-	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
-
-	s3c24xx_register_baseclocks(xtal);
-	s5p_register_clocks(xtal);
-	s5p6442_register_clocks();
-	s5p6442_setup_clocks();
-}
-
-void __init s5p6442_init_irq(void)
-{
-	/* S5P6442 supports 3 VIC */
-	u32 vic[3];
-
-	/* VIC0, VIC1, and VIC2: some interrupt reserved */
-	vic[0] = 0x7fefffff;
-	vic[1] = 0X7f389c81;
-	vic[2] = 0X1bbbcfff;
-
-	s5p_init_irq(vic, ARRAY_SIZE(vic));
-}
-
-struct sysdev_class s5p6442_sysclass = {
-	.name	= "s5p6442-core",
-};
-
-static struct sys_device s5p6442_sysdev = {
-	.cls	= &s5p6442_sysclass,
-};
-
-static int __init s5p6442_core_init(void)
-{
-	return sysdev_class_register(&s5p6442_sysclass);
-}
-
-core_initcall(s5p6442_core_init);
-
-int __init s5p6442_init(void)
-{
-	printk(KERN_INFO "S5P6442: Initializing architecture\n");
-
-	/* set idle function */
-	pm_idle = s5p6442_idle;
-
-	return sysdev_register(&s5p6442_sysdev);
-}

arch/arm/mach-s5p6442/dev-audio.c

@@ -1,217 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/dev-audio.c
- *
- * Copyright (c) 2010 Samsung Electronics Co. Ltd
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/audio.h>
-
-#include <mach/map.h>
-#include <mach/dma.h>
-#include <mach/irqs.h>
-
-static int s5p6442_cfg_i2s(struct platform_device *pdev)
-{
-	unsigned int base;
-
-	/* configure GPIO for i2s port */
-	switch (pdev->id) {
-	case 1:
-		base = S5P6442_GPC1(0);
-		break;
-
-	case 0:
-		base = S5P6442_GPC0(0);
-		break;
-
-	default:
-		printk(KERN_ERR "Invalid Device %d\n", pdev->id);
-		return -EINVAL;
-	}
-
-	s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(2));
-	return 0;
-}
-
-static const char *rclksrc_v35[] = {
-	[0] = "busclk",
-	[1] = "i2sclk",
-};
-
-static struct s3c_audio_pdata i2sv35_pdata = {
-	.cfg_gpio = s5p6442_cfg_i2s,
-	.type = {
-		.i2s = {
-			.quirks = QUIRK_SEC_DAI | QUIRK_NEED_RSTCLR,
-			.src_clk = rclksrc_v35,
-		},
-	},
-};
-
-static struct resource s5p6442_iis0_resource[] = {
-	[0] = {
-		.start = S5P6442_PA_I2S0,
-		.end   = S5P6442_PA_I2S0 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_I2S0_TX,
-		.end   = DMACH_I2S0_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_I2S0_RX,
-		.end   = DMACH_I2S0_RX,
-		.flags = IORESOURCE_DMA,
-	},
-	[3] = {
-		.start = DMACH_I2S0S_TX,
-		.end = DMACH_I2S0S_TX,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-struct platform_device s5p6442_device_iis0 = {
-	.name = "samsung-i2s",
-	.id = 0,
-	.num_resources	  = ARRAY_SIZE(s5p6442_iis0_resource),
-	.resource	  = s5p6442_iis0_resource,
-	.dev = {
-		.platform_data = &i2sv35_pdata,
-	},
-};
-
-static const char *rclksrc_v3[] = {
-	[0] = "iis",
-	[1] = "sclk_audio",
-};
-
-static struct s3c_audio_pdata i2sv3_pdata = {
-	.cfg_gpio = s5p6442_cfg_i2s,
-	.type = {
-		.i2s = {
-			.src_clk = rclksrc_v3,
-		},
-	},
-};
-
-static struct resource s5p6442_iis1_resource[] = {
-	[0] = {
-		.start = S5P6442_PA_I2S1,
-		.end   = S5P6442_PA_I2S1 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_I2S1_TX,
-		.end   = DMACH_I2S1_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_I2S1_RX,
-		.end   = DMACH_I2S1_RX,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-struct platform_device s5p6442_device_iis1 = {
-	.name		  = "samsung-i2s",
-	.id		  = 1,
-	.num_resources	  = ARRAY_SIZE(s5p6442_iis1_resource),
-	.resource	  = s5p6442_iis1_resource,
-	.dev = {
-		.platform_data = &i2sv3_pdata,
-	},
-};
-
-/* PCM Controller platform_devices */
-
-static int s5p6442_pcm_cfg_gpio(struct platform_device *pdev)
-{
-	unsigned int base;
-
-	switch (pdev->id) {
-	case 0:
-		base = S5P6442_GPC0(0);
-		break;
-
-	case 1:
-		base = S5P6442_GPC1(0);
-		break;
-
-	default:
-		printk(KERN_DEBUG "Invalid PCM Controller number!");
-		return -EINVAL;
-	}
-
-	s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(3));
-	return 0;
-}
-
-static struct s3c_audio_pdata s3c_pcm_pdata = {
-	.cfg_gpio = s5p6442_pcm_cfg_gpio,
-};
-
-static struct resource s5p6442_pcm0_resource[] = {
-	[0] = {
-		.start = S5P6442_PA_PCM0,
-		.end   = S5P6442_PA_PCM0 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_PCM0_TX,
-		.end   = DMACH_PCM0_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_PCM0_RX,
-		.end   = DMACH_PCM0_RX,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-struct platform_device s5p6442_device_pcm0 = {
-	.name		  = "samsung-pcm",
-	.id		  = 0,
-	.num_resources	  = ARRAY_SIZE(s5p6442_pcm0_resource),
-	.resource	  = s5p6442_pcm0_resource,
-	.dev = {
-		.platform_data = &s3c_pcm_pdata,
-	},
-};
-
-static struct resource s5p6442_pcm1_resource[] = {
-	[0] = {
-		.start = S5P6442_PA_PCM1,
-		.end   = S5P6442_PA_PCM1 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_PCM1_TX,
-		.end   = DMACH_PCM1_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_PCM1_RX,
-		.end   = DMACH_PCM1_RX,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-struct platform_device s5p6442_device_pcm1 = {
-	.name		  = "samsung-pcm",
-	.id		  = 1,
-	.num_resources	  = ARRAY_SIZE(s5p6442_pcm1_resource),
-	.resource	  = s5p6442_pcm1_resource,
-	.dev = {
-		.platform_data = &s3c_pcm_pdata,
-	},
-};

arch/arm/mach-s5p6442/dev-spi.c

@@ -1,121 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/dev-spi.c
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-
-#include <mach/dma.h>
-#include <mach/map.h>
-#include <mach/irqs.h>
-#include <mach/spi-clocks.h>
-
-#include <plat/s3c64xx-spi.h>
-#include <plat/gpio-cfg.h>
-
-static char *spi_src_clks[] = {
-	[S5P6442_SPI_SRCCLK_PCLK] = "pclk",
-	[S5P6442_SPI_SRCCLK_SCLK] = "spi_epll",
-};
-
-/* SPI Controller platform_devices */
-
-/* Since we emulate multi-cs capability, we do not touch the CS.
- * The emulated CS is toggled by board specific mechanism, as it can
- * be either some immediate GPIO or some signal out of some other
- * chip in between ... or some yet another way.
- * We simply do not assume anything about CS.
- */
-static int s5p6442_spi_cfg_gpio(struct platform_device *pdev)
-{
-	switch (pdev->id) {
-	case 0:
-		s3c_gpio_cfgpin(S5P6442_GPB(0), S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(S5P6442_GPB(0), S3C_GPIO_PULL_UP);
-		s3c_gpio_cfgall_range(S5P6442_GPB(2), 2,
-				      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-		break;
-
-	default:
-		dev_err(&pdev->dev, "Invalid SPI Controller number!");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static struct resource s5p6442_spi0_resource[] = {
-	[0] = {
-		.start = S5P6442_PA_SPI,
-		.end   = S5P6442_PA_SPI + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_SPI0_TX,
-		.end   = DMACH_SPI0_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_SPI0_RX,
-		.end   = DMACH_SPI0_RX,
-		.flags = IORESOURCE_DMA,
-	},
-	[3] = {
-		.start = IRQ_SPI0,
-		.end   = IRQ_SPI0,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct s3c64xx_spi_info s5p6442_spi0_pdata = {
-	.cfg_gpio = s5p6442_spi_cfg_gpio,
-	.fifo_lvl_mask = 0x1ff,
-	.rx_lvl_offset = 15,
-};
-
-static u64 spi_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device s5p6442_device_spi = {
-	.name		  = "s3c64xx-spi",
-	.id		  = 0,
-	.num_resources	  = ARRAY_SIZE(s5p6442_spi0_resource),
-	.resource	  = s5p6442_spi0_resource,
-	.dev = {
-		.dma_mask		= &spi_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data = &s5p6442_spi0_pdata,
-	},
-};
-
-void __init s5p6442_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
-{
-	struct s3c64xx_spi_info *pd;
-
-	/* Reject invalid configuration */
-	if (!num_cs || src_clk_nr < 0
-			|| src_clk_nr > S5P6442_SPI_SRCCLK_SCLK) {
-		printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__);
-		return;
-	}
-
-	switch (cntrlr) {
-	case 0:
-		pd = &s5p6442_spi0_pdata;
-		break;
-	default:
-		printk(KERN_ERR "%s: Invalid SPI controller(%d)\n",
-							__func__, cntrlr);
-		return;
-	}
-
-	pd->num_cs = num_cs;
-	pd->src_clk_nr = src_clk_nr;
-	pd->src_clk_name = spi_src_clks[src_clk_nr];
-}

arch/arm/mach-s5p6442/dma.c

@@ -1,105 +0,0 @@
-/*
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-
-#include <plat/devs.h>
-#include <plat/irqs.h>
-
-#include <mach/map.h>
-#include <mach/irqs.h>
-
-#include <plat/s3c-pl330-pdata.h>
-
-static u64 dma_dmamask = DMA_BIT_MASK(32);
-
-static struct resource s5p6442_pdma_resource[] = {
-	[0] = {
-		.start  = S5P6442_PA_PDMA,
-		.end    = S5P6442_PA_PDMA + SZ_4K,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_PDMA,
-		.end	= IRQ_PDMA,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct s3c_pl330_platdata s5p6442_pdma_pdata = {
-	.peri = {
-		[0] = DMACH_UART0_RX,
-		[1] = DMACH_UART0_TX,
-		[2] = DMACH_UART1_RX,
-		[3] = DMACH_UART1_TX,
-		[4] = DMACH_UART2_RX,
-		[5] = DMACH_UART2_TX,
-		[6] = DMACH_MAX,
-		[7] = DMACH_MAX,
-		[8] = DMACH_MAX,
-		[9] = DMACH_I2S0_RX,
-		[10] = DMACH_I2S0_TX,
-		[11] = DMACH_I2S0S_TX,
-		[12] = DMACH_I2S1_RX,
-		[13] = DMACH_I2S1_TX,
-		[14] = DMACH_MAX,
-		[15] = DMACH_MAX,
-		[16] = DMACH_SPI0_RX,
-		[17] = DMACH_SPI0_TX,
-		[18] = DMACH_MAX,
-		[19] = DMACH_MAX,
-		[20] = DMACH_PCM0_RX,
-		[21] = DMACH_PCM0_TX,
-		[22] = DMACH_PCM1_RX,
-		[23] = DMACH_PCM1_TX,
-		[24] = DMACH_MAX,
-		[25] = DMACH_MAX,
-		[26] = DMACH_MAX,
-		[27] = DMACH_MSM_REQ0,
-		[28] = DMACH_MSM_REQ1,
-		[29] = DMACH_MSM_REQ2,
-		[30] = DMACH_MSM_REQ3,
-		[31] = DMACH_MAX,
-	},
-};
-
-static struct platform_device s5p6442_device_pdma = {
-	.name		= "s3c-pl330",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s5p6442_pdma_resource),
-	.resource	= s5p6442_pdma_resource,
-	.dev		= {
-		.dma_mask = &dma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &s5p6442_pdma_pdata,
-	},
-};
-
-static struct platform_device *s5p6442_dmacs[] __initdata = {
-	&s5p6442_device_pdma,
-};
-
-static int __init s5p6442_dma_init(void)
-{
-	platform_add_devices(s5p6442_dmacs, ARRAY_SIZE(s5p6442_dmacs));
-
-	return 0;
-}
-arch_initcall(s5p6442_dma_init);

arch/arm/mach-s5p6442/include/mach/debug-macro.S

@@ -1,35 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/include/mach/debug-macro.S
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Based on arch/arm/mach-s3c6400/include/mach/debug-macro.S
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* pull in the relevant register and map files. */
-
-#include <mach/map.h>
-#include <plat/regs-serial.h>
-
-	.macro addruart, rp, rv
-		ldr	\rp, = S3C_PA_UART
-		ldr	\rv, = S3C_VA_UART
-#if CONFIG_DEBUG_S3C_UART != 0
-		add	\rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
-		add	\rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
-#endif
-	.endm
-
-#define fifo_full fifo_full_s5pv210
-#define fifo_level fifo_level_s5pv210
-
-/* include the reset of the code which will do the work, we're only
- * compiling for a single cpu processor type so the default of s3c2440
- * will be fine with us.
- */
-
-#include <plat/debug-macro.S>

arch/arm/mach-s5p6442/include/mach/dma.h

@@ -1,26 +0,0 @@
-/*
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __MACH_DMA_H
-#define __MACH_DMA_H
-
-/* This platform uses the common S3C DMA API driver for PL330 */
-#include <plat/s3c-dma-pl330.h>
-
-#endif /* __MACH_DMA_H */

arch/arm/mach-s5p6442/include/mach/entry-macro.S

@@ -1,48 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/include/mach/entry-macro.S
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Low-level IRQ helper macros for the Samsung S5P6442
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <asm/hardware/vic.h>
-#include <mach/map.h>
-#include <plat/irqs.h>
-
-	.macro	disable_fiq
-	.endm
-
-	.macro	get_irqnr_preamble, base, tmp
-	ldr	\base, =VA_VIC0
-	.endm
-
-	.macro	arch_ret_to_user, tmp1, tmp2
-	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-	@ check the vic0
-	mov	\irqnr, # S5P_IRQ_OFFSET + 31
-	ldr	\irqstat, [ \base, # VIC_IRQ_STATUS ]
-	teq	\irqstat, #0
-
-	@ otherwise try vic1
-	addeq	\tmp, \base, #(VA_VIC1 - VA_VIC0)
-	addeq	\irqnr, \irqnr, #32
-	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
-	teqeq	\irqstat, #0
-
-	@ otherwise try vic2
-	addeq	\tmp, \base, #(VA_VIC2 - VA_VIC0)
-	addeq	\irqnr, \irqnr, #32
-	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
-	teqeq	\irqstat, #0
-
-	clzne	\irqstat, \irqstat
-	subne	\irqnr, \irqnr, \irqstat
-	.endm

arch/arm/mach-s5p6442/include/mach/gpio.h

@@ -1,123 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/include/mach/gpio.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P6442 - GPIO lib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H __FILE__
-
-#define gpio_get_value	__gpio_get_value
-#define gpio_set_value	__gpio_set_value
-#define gpio_cansleep	__gpio_cansleep
-#define gpio_to_irq	__gpio_to_irq
-
-/* GPIO bank sizes */
-#define S5P6442_GPIO_A0_NR	(8)
-#define S5P6442_GPIO_A1_NR	(2)
-#define S5P6442_GPIO_B_NR	(4)
-#define S5P6442_GPIO_C0_NR	(5)
-#define S5P6442_GPIO_C1_NR	(5)
-#define S5P6442_GPIO_D0_NR	(2)
-#define S5P6442_GPIO_D1_NR	(6)
-#define S5P6442_GPIO_E0_NR	(8)
-#define S5P6442_GPIO_E1_NR	(5)
-#define S5P6442_GPIO_F0_NR	(8)
-#define S5P6442_GPIO_F1_NR	(8)
-#define S5P6442_GPIO_F2_NR	(8)
-#define S5P6442_GPIO_F3_NR	(6)
-#define S5P6442_GPIO_G0_NR	(7)
-#define S5P6442_GPIO_G1_NR	(7)
-#define S5P6442_GPIO_G2_NR	(7)
-#define S5P6442_GPIO_H0_NR	(8)
-#define S5P6442_GPIO_H1_NR	(8)
-#define S5P6442_GPIO_H2_NR	(8)
-#define S5P6442_GPIO_H3_NR	(8)
-#define S5P6442_GPIO_J0_NR	(8)
-#define S5P6442_GPIO_J1_NR	(6)
-#define S5P6442_GPIO_J2_NR	(8)
-#define S5P6442_GPIO_J3_NR	(8)
-#define S5P6442_GPIO_J4_NR	(5)
-
-/* GPIO bank numbers */
-
-/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
- * space for debugging purposes so that any accidental
- * change from one gpio bank to another can be caught.
-*/
-
-#define S5P6442_GPIO_NEXT(__gpio) \
-	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
-
-enum s5p_gpio_number {
-	S5P6442_GPIO_A0_START	= 0,
-	S5P6442_GPIO_A1_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_A0),
-	S5P6442_GPIO_B_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_A1),
-	S5P6442_GPIO_C0_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_B),
-	S5P6442_GPIO_C1_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_C0),
-	S5P6442_GPIO_D0_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_C1),
-	S5P6442_GPIO_D1_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_D0),
-	S5P6442_GPIO_E0_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_D1),
-	S5P6442_GPIO_E1_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_E0),
-	S5P6442_GPIO_F0_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_E1),
-	S5P6442_GPIO_F1_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_F0),
-	S5P6442_GPIO_F2_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_F1),
-	S5P6442_GPIO_F3_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_F2),
-	S5P6442_GPIO_G0_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_F3),
-	S5P6442_GPIO_G1_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_G0),
-	S5P6442_GPIO_G2_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_G1),
-	S5P6442_GPIO_H0_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_G2),
-	S5P6442_GPIO_H1_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_H0),
-	S5P6442_GPIO_H2_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_H1),
-	S5P6442_GPIO_H3_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_H2),
-	S5P6442_GPIO_J0_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_H3),
-	S5P6442_GPIO_J1_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_J0),
-	S5P6442_GPIO_J2_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_J1),
-	S5P6442_GPIO_J3_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_J2),
-	S5P6442_GPIO_J4_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_J3),
-};
-
-/* S5P6442 GPIO number definitions. */
-#define S5P6442_GPA0(_nr)	(S5P6442_GPIO_A0_START + (_nr))
-#define S5P6442_GPA1(_nr)	(S5P6442_GPIO_A1_START + (_nr))
-#define S5P6442_GPB(_nr)	(S5P6442_GPIO_B_START + (_nr))
-#define S5P6442_GPC0(_nr)	(S5P6442_GPIO_C0_START + (_nr))
-#define S5P6442_GPC1(_nr)	(S5P6442_GPIO_C1_START + (_nr))
-#define S5P6442_GPD0(_nr)	(S5P6442_GPIO_D0_START + (_nr))
-#define S5P6442_GPD1(_nr)	(S5P6442_GPIO_D1_START + (_nr))
-#define S5P6442_GPE0(_nr)	(S5P6442_GPIO_E0_START + (_nr))
-#define S5P6442_GPE1(_nr)	(S5P6442_GPIO_E1_START + (_nr))
-#define S5P6442_GPF0(_nr)	(S5P6442_GPIO_F0_START + (_nr))
-#define S5P6442_GPF1(_nr)	(S5P6442_GPIO_F1_START + (_nr))
-#define S5P6442_GPF2(_nr)	(S5P6442_GPIO_F2_START + (_nr))
-#define S5P6442_GPF3(_nr)	(S5P6442_GPIO_F3_START + (_nr))
-#define S5P6442_GPG0(_nr)	(S5P6442_GPIO_G0_START + (_nr))
-#define S5P6442_GPG1(_nr)	(S5P6442_GPIO_G1_START + (_nr))
-#define S5P6442_GPG2(_nr)	(S5P6442_GPIO_G2_START + (_nr))
-#define S5P6442_GPH0(_nr)	(S5P6442_GPIO_H0_START + (_nr))
-#define S5P6442_GPH1(_nr)	(S5P6442_GPIO_H1_START + (_nr))
-#define S5P6442_GPH2(_nr)	(S5P6442_GPIO_H2_START + (_nr))
-#define S5P6442_GPH3(_nr)	(S5P6442_GPIO_H3_START + (_nr))
-#define S5P6442_GPJ0(_nr)	(S5P6442_GPIO_J0_START + (_nr))
-#define S5P6442_GPJ1(_nr)	(S5P6442_GPIO_J1_START + (_nr))
-#define S5P6442_GPJ2(_nr)	(S5P6442_GPIO_J2_START + (_nr))
-#define S5P6442_GPJ3(_nr)	(S5P6442_GPIO_J3_START + (_nr))
-#define S5P6442_GPJ4(_nr)	(S5P6442_GPIO_J4_START + (_nr))
-
-/* the end of the S5P6442 specific gpios */
-#define S5P6442_GPIO_END	(S5P6442_GPJ4(S5P6442_GPIO_J4_NR) + 1)
-#define S3C_GPIO_END		S5P6442_GPIO_END
-
-/* define the number of gpios we need to the one after the GPJ4() range */
-#define ARCH_NR_GPIOS		(S5P6442_GPJ4(S5P6442_GPIO_J4_NR) +	\
-				 CONFIG_SAMSUNG_GPIO_EXTRA + 1)
-
-#include <asm-generic/gpio.h>
-
-#endif /* __ASM_ARCH_GPIO_H */

arch/arm/mach-s5p6442/include/mach/hardware.h

@@ -1,18 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/include/mach/hardware.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P6442 - Hardware support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H __FILE__
-
-/* currently nothing here, placeholder */
-
-#endif /* __ASM_ARCH_HARDWARE_H */

arch/arm/mach-s5p6442/include/mach/io.h

@@ -1,17 +0,0 @@
-/* arch/arm/mach-s5p6442/include/mach/io.h
- *
- * Copyright 2008-2010 Ben Dooks <ben-linux@fluff.org>
- *
- * Default IO routines for S5P6442
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-/* No current ISA/PCI bus support. */
-#define __io(a)		__typesafe_io(a)
-#define __mem_pci(a)	(a)
-
-#define IO_SPACE_LIMIT (0xFFFFFFFF)
-
-#endif

arch/arm/mach-s5p6442/include/mach/irqs.h

@@ -1,87 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/include/mach/irqs.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P6442 - IRQ definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H __FILE__
-
-#include <plat/irqs.h>
-
-/* VIC0 */
-#define IRQ_EINT16_31 		S5P_IRQ_VIC0(16)
-#define IRQ_BATF 		S5P_IRQ_VIC0(17)
-#define IRQ_MDMA 		S5P_IRQ_VIC0(18)
-#define IRQ_PDMA 		S5P_IRQ_VIC0(19)
-#define IRQ_TIMER0_VIC		S5P_IRQ_VIC0(21)
-#define IRQ_TIMER1_VIC		S5P_IRQ_VIC0(22)
-#define IRQ_TIMER2_VIC		S5P_IRQ_VIC0(23)
-#define IRQ_TIMER3_VIC		S5P_IRQ_VIC0(24)
-#define IRQ_TIMER4_VIC		S5P_IRQ_VIC0(25)
-#define IRQ_SYSTIMER		S5P_IRQ_VIC0(26)
-#define IRQ_WDT			S5P_IRQ_VIC0(27)
-#define IRQ_RTC_ALARM		S5P_IRQ_VIC0(28)
-#define IRQ_RTC_TIC		S5P_IRQ_VIC0(29)
-#define IRQ_GPIOINT		S5P_IRQ_VIC0(30)
-
-/* VIC1 */
-#define IRQ_PMU			S5P_IRQ_VIC1(0)
-#define IRQ_ONENAND 		S5P_IRQ_VIC1(7)
-#define IRQ_UART0 		S5P_IRQ_VIC1(10)
-#define IRQ_UART1 		S5P_IRQ_VIC1(11)
-#define IRQ_UART2 		S5P_IRQ_VIC1(12)
-#define IRQ_SPI0 		S5P_IRQ_VIC1(15)
-#define IRQ_IIC 		S5P_IRQ_VIC1(19)
-#define IRQ_IIC1 		S5P_IRQ_VIC1(20)
-#define IRQ_IIC2 		S5P_IRQ_VIC1(21)
-#define IRQ_OTG 		S5P_IRQ_VIC1(24)
-#define IRQ_MSM 		S5P_IRQ_VIC1(25)
-#define IRQ_HSMMC0 		S5P_IRQ_VIC1(26)
-#define IRQ_HSMMC1 		S5P_IRQ_VIC1(27)
-#define IRQ_HSMMC2 		S5P_IRQ_VIC1(28)
-#define IRQ_COMMRX 		S5P_IRQ_VIC1(29)
-#define IRQ_COMMTX 		S5P_IRQ_VIC1(30)
-
-/* VIC2 */
-#define IRQ_LCD0 		S5P_IRQ_VIC2(0)
-#define IRQ_LCD1 		S5P_IRQ_VIC2(1)
-#define IRQ_LCD2 		S5P_IRQ_VIC2(2)
-#define IRQ_LCD3 		S5P_IRQ_VIC2(3)
-#define IRQ_ROTATOR 		S5P_IRQ_VIC2(4)
-#define IRQ_FIMC0 		S5P_IRQ_VIC2(5)
-#define IRQ_FIMC1 		S5P_IRQ_VIC2(6)
-#define IRQ_FIMC2 		S5P_IRQ_VIC2(7)
-#define IRQ_JPEG 		S5P_IRQ_VIC2(8)
-#define IRQ_3D 			S5P_IRQ_VIC2(10)
-#define IRQ_Mixer 		S5P_IRQ_VIC2(11)
-#define IRQ_MFC 		S5P_IRQ_VIC2(14)
-#define IRQ_TVENC 		S5P_IRQ_VIC2(15)
-#define IRQ_I2S0 		S5P_IRQ_VIC2(16)
-#define IRQ_I2S1 		S5P_IRQ_VIC2(17)
-#define IRQ_RP 			S5P_IRQ_VIC2(19)
-#define IRQ_PCM0 		S5P_IRQ_VIC2(20)
-#define IRQ_PCM1 		S5P_IRQ_VIC2(21)
-#define IRQ_ADC 		S5P_IRQ_VIC2(23)
-#define IRQ_PENDN 		S5P_IRQ_VIC2(24)
-#define IRQ_KEYPAD 		S5P_IRQ_VIC2(25)
-#define IRQ_SSS_INT 		S5P_IRQ_VIC2(27)
-#define IRQ_SSS_HASH 		S5P_IRQ_VIC2(28)
-#define IRQ_VIC_END 		S5P_IRQ_VIC2(31)
-
-#define S5P_IRQ_EINT_BASE	(IRQ_VIC_END + 1)
-
-#define S5P_EINT_BASE1		(S5P_IRQ_VIC0(0))
-#define S5P_EINT_BASE2		(S5P_IRQ_EINT_BASE)
-
-/* Set the default NR_IRQS */
-
-#define NR_IRQS 		(IRQ_EINT(31) + 1)
-
-#endif /* __ASM_ARCH_IRQS_H */

arch/arm/mach-s5p6442/include/mach/map.h

@@ -1,76 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/include/mach/map.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P6442 - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MAP_H
-#define __ASM_ARCH_MAP_H __FILE__
-
-#include <plat/map-base.h>
-#include <plat/map-s5p.h>
-
-#define S5P6442_PA_SDRAM	0x20000000
-
-#define S5P6442_PA_I2S0		0xC0B00000
-#define S5P6442_PA_I2S1		0xF2200000
-
-#define S5P6442_PA_CHIPID	0xE0000000
-
-#define S5P6442_PA_SYSCON	0xE0100000
-
-#define S5P6442_PA_GPIO		0xE0200000
-
-#define S5P6442_PA_VIC0		0xE4000000
-#define S5P6442_PA_VIC1		0xE4100000
-#define S5P6442_PA_VIC2		0xE4200000
-
-#define S5P6442_PA_SROMC	0xE7000000
-
-#define S5P6442_PA_MDMA		0xE8000000
-#define S5P6442_PA_PDMA		0xE9000000
-
-#define S5P6442_PA_TIMER	0xEA000000
-
-#define S5P6442_PA_SYSTIMER	0xEA100000
-
-#define S5P6442_PA_WATCHDOG	0xEA200000
-
-#define S5P6442_PA_UART		0xEC000000
-
-#define S5P6442_PA_IIC0		0xEC100000
-
-#define S5P6442_PA_SPI		0xEC300000
-
-#define S5P6442_PA_PCM0		0xF2400000
-#define S5P6442_PA_PCM1		0xF2500000
-
-/* Compatibiltiy Defines */
-
-#define S3C_PA_IIC		S5P6442_PA_IIC0
-#define S3C_PA_WDT		S5P6442_PA_WATCHDOG
-
-#define S5P_PA_CHIPID		S5P6442_PA_CHIPID
-#define S5P_PA_SDRAM		S5P6442_PA_SDRAM
-#define S5P_PA_SROMC		S5P6442_PA_SROMC
-#define S5P_PA_SYSCON		S5P6442_PA_SYSCON
-#define S5P_PA_TIMER		S5P6442_PA_TIMER
-
-/* UART */
-
-#define S3C_PA_UART		S5P6442_PA_UART
-
-#define S5P_PA_UART(x)		(S3C_PA_UART + ((x) * S3C_UART_OFFSET))
-#define S5P_PA_UART0		S5P_PA_UART(0)
-#define S5P_PA_UART1		S5P_PA_UART(1)
-#define S5P_PA_UART2		S5P_PA_UART(2)
-
-#define S5P_SZ_UART		SZ_256
-
-#endif /* __ASM_ARCH_MAP_H */

arch/arm/mach-s5p6442/include/mach/memory.h

@@ -1,19 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/include/mach/memory.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P6442 - Memory definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET		UL(0x20000000)
-#define CONSISTENT_DMA_SIZE	SZ_8M
-
-#endif /* __ASM_ARCH_MEMORY_H */

arch/arm/mach-s5p6442/include/mach/pwm-clock.h

@@ -1,70 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/include/mach/pwm-clock.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
- *
- * S5P6442 - pwm clock and timer support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_PWMCLK_H
-#define __ASM_ARCH_PWMCLK_H __FILE__
-
-/**
- * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
- * @tcfg: The timer TCFG1 register bits shifted down to 0.
- *
- * Return true if the given configuration from TCFG1 is a TCLK instead
- * any of the TDIV clocks.
- */
-static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
-{
-	return tcfg == S3C64XX_TCFG1_MUX_TCLK;
-}
-
-/**
- * tcfg_to_divisor() - convert tcfg1 setting to a divisor
- * @tcfg1: The tcfg1 setting, shifted down.
- *
- * Get the divisor value for the given tcfg1 setting. We assume the
- * caller has already checked to see if this is not a TCLK source.
- */
-static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
-{
-	return 1 << tcfg1;
-}
-
-/**
- * pwm_tdiv_has_div1() - does the tdiv setting have a /1
- *
- * Return true if we have a /1 in the tdiv setting.
- */
-static inline unsigned int pwm_tdiv_has_div1(void)
-{
-	return 1;
-}
-
-/**
- * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
- * @div: The divisor to calculate the bit information for.
- *
- * Turn a divisor into the necessary bit field for TCFG1.
- */
-static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
-{
-	return ilog2(div);
-}
-
-#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK
-
-#endif /* __ASM_ARCH_PWMCLK_H */

arch/arm/mach-s5p6442/include/mach/regs-clock.h

@@ -1,104 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/include/mach/regs-clock.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P6442 - Clock register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_CLOCK_H
-#define __ASM_ARCH_REGS_CLOCK_H __FILE__
-
-#include <mach/map.h>
-
-#define S5P_CLKREG(x)		(S3C_VA_SYS + (x))
-
-#define S5P_APLL_LOCK		S5P_CLKREG(0x00)
-#define S5P_MPLL_LOCK		S5P_CLKREG(0x08)
-#define S5P_EPLL_LOCK		S5P_CLKREG(0x10)
-#define S5P_VPLL_LOCK		S5P_CLKREG(0x20)
-
-#define S5P_APLL_CON		S5P_CLKREG(0x100)
-#define S5P_MPLL_CON		S5P_CLKREG(0x108)
-#define S5P_EPLL_CON		S5P_CLKREG(0x110)
-#define S5P_VPLL_CON		S5P_CLKREG(0x120)
-
-#define S5P_CLK_SRC0		S5P_CLKREG(0x200)
-#define S5P_CLK_SRC1		S5P_CLKREG(0x204)
-#define S5P_CLK_SRC2		S5P_CLKREG(0x208)
-#define S5P_CLK_SRC3		S5P_CLKREG(0x20C)
-#define S5P_CLK_SRC4		S5P_CLKREG(0x210)
-#define S5P_CLK_SRC5		S5P_CLKREG(0x214)
-#define S5P_CLK_SRC6		S5P_CLKREG(0x218)
-
-#define S5P_CLK_SRC_MASK0	S5P_CLKREG(0x280)
-#define S5P_CLK_SRC_MASK1	S5P_CLKREG(0x284)
-
-#define S5P_CLK_DIV0		S5P_CLKREG(0x300)
-#define S5P_CLK_DIV1		S5P_CLKREG(0x304)
-#define S5P_CLK_DIV2		S5P_CLKREG(0x308)
-#define S5P_CLK_DIV3		S5P_CLKREG(0x30C)
-#define S5P_CLK_DIV4		S5P_CLKREG(0x310)
-#define S5P_CLK_DIV5		S5P_CLKREG(0x314)
-#define S5P_CLK_DIV6		S5P_CLKREG(0x318)
-
-#define S5P_CLKGATE_IP0		S5P_CLKREG(0x460)
-#define S5P_CLKGATE_IP3		S5P_CLKREG(0x46C)
-
-/* CLK_OUT */
-#define S5P_CLK_OUT_SHIFT	(12)
-#define S5P_CLK_OUT_MASK	(0x1F << S5P_CLK_OUT_SHIFT)
-#define S5P_CLK_OUT		S5P_CLKREG(0x500)
-
-#define S5P_CLK_DIV_STAT0	S5P_CLKREG(0x1000)
-#define S5P_CLK_DIV_STAT1	S5P_CLKREG(0x1004)
-
-#define S5P_CLK_MUX_STAT0	S5P_CLKREG(0x1100)
-#define S5P_CLK_MUX_STAT1	S5P_CLKREG(0x1104)
-
-#define S5P_MDNIE_SEL		S5P_CLKREG(0x7008)
-
-/* Register Bit definition */
-#define S5P_EPLL_EN     		(1<<31)
-#define S5P_EPLL_MASK   		0xffffffff
-#define S5P_EPLLVAL(_m, _p, _s)   	((_m) << 16 | ((_p) << 8) | ((_s)))
-
-/* CLKDIV0 */
-#define S5P_CLKDIV0_APLL_SHIFT		(0)
-#define S5P_CLKDIV0_APLL_MASK		(0x7 << S5P_CLKDIV0_APLL_SHIFT)
-#define S5P_CLKDIV0_A2M_SHIFT		(4)
-#define S5P_CLKDIV0_A2M_MASK		(0x7 << S5P_CLKDIV0_A2M_SHIFT)
-#define S5P_CLKDIV0_D0CLK_SHIFT		(16)
-#define S5P_CLKDIV0_D0CLK_MASK		(0xF << S5P_CLKDIV0_D0CLK_SHIFT)
-#define S5P_CLKDIV0_P0CLK_SHIFT		(20)
-#define S5P_CLKDIV0_P0CLK_MASK		(0x7 << S5P_CLKDIV0_P0CLK_SHIFT)
-#define S5P_CLKDIV0_D1CLK_SHIFT		(24)
-#define S5P_CLKDIV0_D1CLK_MASK		(0xF << S5P_CLKDIV0_D1CLK_SHIFT)
-#define S5P_CLKDIV0_P1CLK_SHIFT		(28)
-#define S5P_CLKDIV0_P1CLK_MASK		(0x7 << S5P_CLKDIV0_P1CLK_SHIFT)
-
-/* Clock MUX status Registers */
-#define S5P_CLK_MUX_STAT0_APLL_SHIFT	(0)
-#define S5P_CLK_MUX_STAT0_APLL_MASK	(0x7 << S5P_CLK_MUX_STAT0_APLL_SHIFT)
-#define S5P_CLK_MUX_STAT0_MPLL_SHIFT	(4)
-#define S5P_CLK_MUX_STAT0_MPLL_MASK	(0x7 << S5P_CLK_MUX_STAT0_MPLL_SHIFT)
-#define S5P_CLK_MUX_STAT0_EPLL_SHIFT	(8)
-#define S5P_CLK_MUX_STAT0_EPLL_MASK	(0x7 << S5P_CLK_MUX_STAT0_EPLL_SHIFT)
-#define S5P_CLK_MUX_STAT0_VPLL_SHIFT	(12)
-#define S5P_CLK_MUX_STAT0_VPLL_MASK	(0x7 << S5P_CLK_MUX_STAT0_VPLL_SHIFT)
-#define S5P_CLK_MUX_STAT0_MUXARM_SHIFT	(16)
-#define S5P_CLK_MUX_STAT0_MUXARM_MASK	(0x7 << S5P_CLK_MUX_STAT0_MUXARM_SHIFT)
-#define S5P_CLK_MUX_STAT0_MUXD0_SHIFT	(20)
-#define S5P_CLK_MUX_STAT0_MUXD0_MASK	(0x7 << S5P_CLK_MUX_STAT0_MUXD0_SHIFT)
-#define S5P_CLK_MUX_STAT0_MUXD1_SHIFT	(24)
-#define S5P_CLK_MUX_STAT0_MUXD1_MASK	(0x7 << S5P_CLK_MUX_STAT0_MUXD1_SHIFT)
-#define S5P_CLK_MUX_STAT1_D1SYNC_SHIFT	(24)
-#define S5P_CLK_MUX_STAT1_D1SYNC_MASK	(0x7 << S5P_CLK_MUX_STAT1_D1SYNC_SHIFT)
-#define S5P_CLK_MUX_STAT1_D0SYNC_SHIFT	(28)
-#define S5P_CLK_MUX_STAT1_D0SYNC_MASK	(0x7 << S5P_CLK_MUX_STAT1_D0SYNC_SHIFT)
-
-#endif /* __ASM_ARCH_REGS_CLOCK_H */

arch/arm/mach-s5p6442/include/mach/regs-irq.h

@@ -1,19 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/include/mach/regs-irq.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P6442 - IRQ register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_IRQ_H
-#define __ASM_ARCH_REGS_IRQ_H __FILE__
-
-#include <asm/hardware/vic.h>
-#include <mach/map.h>
-
-#endif /* __ASM_ARCH_REGS_IRQ_H */

arch/arm/mach-s5p6442/include/mach/spi-clocks.h

@@ -1,17 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/include/mach/spi-clocks.h
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __S5P6442_PLAT_SPI_CLKS_H
-#define __S5P6442_PLAT_SPI_CLKS_H __FILE__
-
-#define S5P6442_SPI_SRCCLK_PCLK		0
-#define S5P6442_SPI_SRCCLK_SCLK		1
-
-#endif /* __S5P6442_PLAT_SPI_CLKS_H */

arch/arm/mach-s5p6442/include/mach/system.h

@@ -1,23 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/include/mach/system.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P6442 - system support header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H __FILE__
-
-#include <plat/system-reset.h>
-
-static void arch_idle(void)
-{
-	/* nothing here yet */
-}
-
-#endif /* __ASM_ARCH_SYSTEM_H */

arch/arm/mach-s5p6442/include/mach/tick.h

@@ -1,26 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/include/mach/tick.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Based on arch/arm/mach-s3c6400/include/mach/tick.h
- *
- * S5P6442 - Timer tick support definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TICK_H
-#define __ASM_ARCH_TICK_H __FILE__
-
-static inline u32 s3c24xx_ostimer_pending(void)
-{
-	u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
-	return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0)));
-}
-
-#define TICK_MAX	(0xffffffff)
-
-#endif /* __ASM_ARCH_TICK_H */

arch/arm/mach-s5p6442/include/mach/timex.h

@@ -1,24 +0,0 @@
-/* arch/arm/mach-s5p6442/include/mach/timex.h
- *
- * Copyright (c) 2003-2010 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S5P6442 - time parameters
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
- * a variable is useless. It seems as long as we make our timers an
- * exact multiple of HZ, any value that makes a 1->1 correspondence
- * for the time conversion functions to/from jiffies is acceptable.
-*/
-
-#define CLOCK_TICK_RATE 12000000
-
-#endif /* __ASM_ARCH_TIMEX_H */

arch/arm/mach-s5p6442/include/mach/uncompress.h

@@ -1,24 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/include/mach/uncompress.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P6442 - uncompress code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <mach/map.h>
-#include <plat/uncompress.h>
-
-static void arch_detect_cpu(void)
-{
-	/* we do not need to do any cpu detection here at the moment. */
-}
-
-#endif /* __ASM_ARCH_UNCOMPRESS_H */

arch/arm/mach-s5p6442/include/mach/vmalloc.h

@@ -1,17 +0,0 @@
-/* arch/arm/mach-s5p6442/include/mach/vmalloc.h
- *
- * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S5P6442 vmalloc definition
-*/
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END	0xF6000000UL
-
-#endif /* __ASM_ARCH_VMALLOC_H */

arch/arm/mach-s5p6442/init.c

@@ -1,44 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/s5p6442-init.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/s5p6442.h>
-#include <plat/regs-serial.h>
-
-static struct s3c24xx_uart_clksrc s5p6442_serial_clocks[] = {
-	[0] = {
-		.name		= "pclk",
-		.divisor	= 1,
-		.min_baud	= 0,
-		.max_baud	= 0,
-	},
-};
-
-/* uart registration process */
-void __init s5p6442_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	struct s3c2410_uartcfg *tcfg = cfg;
-	u32 ucnt;
-
-	for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
-		if (!tcfg->clocks) {
-			tcfg->clocks = s5p6442_serial_clocks;
-			tcfg->clocks_size = ARRAY_SIZE(s5p6442_serial_clocks);
-		}
-	}
-
-	s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);
-}

arch/arm/mach-s5p6442/mach-smdk6442.c

@@ -1,102 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/mach-smdk6442.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/i2c.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include <plat/regs-serial.h>
-#include <plat/s5p6442.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/iic.h>
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define SMDK6442_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
-				 S3C2410_UCON_RXILEVEL |	\
-				 S3C2410_UCON_TXIRQMODE |	\
-				 S3C2410_UCON_RXIRQMODE |	\
-				 S3C2410_UCON_RXFIFO_TOI |	\
-				 S3C2443_UCON_RXERR_IRQEN)
-
-#define SMDK6442_ULCON_DEFAULT	S3C2410_LCON_CS8
-
-#define SMDK6442_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
-				 S5PV210_UFCON_TXTRIG4 |	\
-				 S5PV210_UFCON_RXTRIG4)
-
-static struct s3c2410_uartcfg smdk6442_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport		= 0,
-		.flags		= 0,
-		.ucon		= SMDK6442_UCON_DEFAULT,
-		.ulcon		= SMDK6442_ULCON_DEFAULT,
-		.ufcon		= SMDK6442_UFCON_DEFAULT,
-	},
-	[1] = {
-		.hwport		= 1,
-		.flags		= 0,
-		.ucon		= SMDK6442_UCON_DEFAULT,
-		.ulcon		= SMDK6442_ULCON_DEFAULT,
-		.ufcon		= SMDK6442_UFCON_DEFAULT,
-	},
-	[2] = {
-		.hwport		= 2,
-		.flags		= 0,
-		.ucon		= SMDK6442_UCON_DEFAULT,
-		.ulcon		= SMDK6442_ULCON_DEFAULT,
-		.ufcon		= SMDK6442_UFCON_DEFAULT,
-	},
-};
-
-static struct platform_device *smdk6442_devices[] __initdata = {
-	&s3c_device_i2c0,
-	&samsung_asoc_dma,
-	&s5p6442_device_iis0,
-	&s3c_device_wdt,
-};
-
-static struct i2c_board_info smdk6442_i2c_devs0[] __initdata = {
-	{ I2C_BOARD_INFO("wm8580", 0x1b), },
-};
-
-static void __init smdk6442_map_io(void)
-{
-	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
-	s3c24xx_init_clocks(12000000);
-	s3c24xx_init_uarts(smdk6442_uartcfgs, ARRAY_SIZE(smdk6442_uartcfgs));
-}
-
-static void __init smdk6442_machine_init(void)
-{
-	s3c_i2c0_set_platdata(NULL);
-	i2c_register_board_info(0, smdk6442_i2c_devs0,
-			ARRAY_SIZE(smdk6442_i2c_devs0));
-	platform_add_devices(smdk6442_devices, ARRAY_SIZE(smdk6442_devices));
-}
-
-MACHINE_START(SMDK6442, "SMDK6442")
-	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
-	.boot_params	= S5P_PA_SDRAM + 0x100,
-	.init_irq	= s5p6442_init_irq,
-	.map_io		= smdk6442_map_io,
-	.init_machine	= smdk6442_machine_init,
-	.timer		= &s3c24xx_timer,
-MACHINE_END

arch/arm/mach-s5p6442/setup-i2c0.c

@@ -1,28 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/setup-i2c0.c
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * I2C0 GPIO configuration.
- *
- * Based on plat-s3c64xx/setup-i2c0.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/gpio.h>
-
-struct platform_device; /* don't need the contents */
-
-#include <plat/gpio-cfg.h>
-#include <plat/iic.h>
-
-void s3c_i2c0_cfg_gpio(struct platform_device *dev)
-{
-	s3c_gpio_cfgall_range(S5P6442_GPD1(0), 2,
-			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-}

arch/arm/plat-s5p/Kconfig

@@ -7,7 +7,7 @@
 
 config PLAT_S5P
 	bool
-	depends on (ARCH_S5P64X0 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS4)
+	depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS4)
 	default y
 	select ARM_VIC if !ARCH_EXYNOS4
 	select ARM_GIC if ARCH_EXYNOS4

arch/arm/plat-s5p/cpu.c

@@ -21,7 +21,6 @@
 
 #include <plat/cpu.h>
 #include <plat/s5p6440.h>
-#include <plat/s5p6442.h>
 #include <plat/s5p6450.h>
 #include <plat/s5pc100.h>
 #include <plat/s5pv210.h>
@@ -30,7 +29,6 @@
 /* table of supported CPUs */
 
 static const char name_s5p6440[] = "S5P6440";
-static const char name_s5p6442[] = "S5P6442";
 static const char name_s5p6450[] = "S5P6450";
 static const char name_s5pc100[] = "S5PC100";
 static const char name_s5pv210[] = "S5PV210/S5PC110";
@@ -45,14 +43,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.init_uarts	= s5p6440_init_uarts,
 		.init		= s5p64x0_init,
 		.name		= name_s5p6440,
-	}, {
-		.idcode		= 0x36442000,
-		.idmask		= 0xfffff000,
-		.map_io		= s5p6442_map_io,
-		.init_clocks	= s5p6442_init_clocks,
-		.init_uarts	= s5p6442_init_uarts,
-		.init		= s5p6442_init,
-		.name		= name_s5p6442,
 	}, {
 		.idcode		= 0x36450000,
 		.idmask		= 0xfffff000,

arch/arm/plat-s5p/include/plat/s5p6442.h

@@ -1,33 +0,0 @@
-/* arch/arm/plat-s5p/include/plat/s5p6442.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Header file for s5p6442 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Common init code for S5P6442 related SoCs */
-
-extern void s5p6442_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s5p6442_register_clocks(void);
-extern void s5p6442_setup_clocks(void);
-
-#ifdef CONFIG_CPU_S5P6442
-
-extern  int s5p6442_init(void);
-extern void s5p6442_init_irq(void);
-extern void s5p6442_map_io(void);
-extern void s5p6442_init_clocks(int xtal);
-
-#define s5p6442_init_uarts s5p6442_common_init_uarts
-
-#else
-#define s5p6442_init_clocks NULL
-#define s5p6442_init_uarts NULL
-#define s5p6442_map_io NULL
-#define s5p6442_init NULL
-#endif

arch/arm/plat-samsung/include/plat/cpu.h

@@ -80,7 +80,6 @@ extern struct sysdev_class s3c2443_sysclass;
 extern struct sysdev_class s3c6410_sysclass;
 extern struct sysdev_class s3c64xx_sysclass;
 extern struct sysdev_class s5p64x0_sysclass;
-extern struct sysdev_class s5p6442_sysclass;
 extern struct sysdev_class s5pv210_sysclass;
 extern struct sysdev_class exynos4_sysclass;
 

arch/arm/plat-samsung/include/plat/debug-macro.S

@@ -11,7 +11,7 @@
 
 #include <plat/regs-serial.h>
 
-/* The S5PV210/S5PC110 and S5P6442 implementations are as belows. */
+/* The S5PV210/S5PC110 implementations are as belows. */
 
 	.macro fifo_level_s5pv210 rd, rx
 		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]

arch/arm/plat-samsung/include/plat/devs.h

@@ -110,12 +110,6 @@ extern struct platform_device exynos4_device_spdif;
 extern struct platform_device exynos4_device_pd[];
 extern struct platform_device exynos4_device_ahci;
 
-extern struct platform_device s5p6442_device_pcm0;
-extern struct platform_device s5p6442_device_pcm1;
-extern struct platform_device s5p6442_device_iis0;
-extern struct platform_device s5p6442_device_iis1;
-extern struct platform_device s5p6442_device_spi;
-
 extern struct platform_device s5p6440_device_pcm;
 extern struct platform_device s5p6440_device_iis;
 

arch/arm/plat-samsung/include/plat/regs-serial.h

@@ -194,7 +194,7 @@
 #define S3C64XX_UINTSP		0x34
 #define S3C64XX_UINTM		0x38
 
-/* Following are specific to S5PV210 and S5P6442 */
+/* Following are specific to S5PV210 */
 #define S5PV210_UCON_CLKMASK	(1<<10)
 #define S5PV210_UCON_PCLK	(0<<10)
 #define S5PV210_UCON_UCLK	(1<<10)

arch/arm/plat-samsung/include/plat/s3c64xx-spi.h

@@ -69,6 +69,5 @@ extern void s3c64xx_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
 extern void s5pc100_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
 extern void s5pv210_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
 extern void s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
-extern void s5p6442_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
 
 #endif /* __S3C64XX_PLAT_SPI_H */

arch/powerpc/kernel/ptrace.c

@@ -933,12 +933,16 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
 	if (data && !(data & DABR_TRANSLATION))
 		return -EIO;
 #ifdef CONFIG_HAVE_HW_BREAKPOINT
+	if (ptrace_get_breakpoints(task) < 0)
+		return -ESRCH;
+
 	bp = thread->ptrace_bps[0];
 	if ((!data) || !(data & (DABR_DATA_WRITE | DABR_DATA_READ))) {
 		if (bp) {
 			unregister_hw_breakpoint(bp);
 			thread->ptrace_bps[0] = NULL;
 		}
+		ptrace_put_breakpoints(task);
 		return 0;
 	}
 	if (bp) {
@@ -948,9 +952,12 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
 					(DABR_DATA_WRITE | DABR_DATA_READ),
 							&attr.bp_type);
 		ret =  modify_user_hw_breakpoint(bp, &attr);
-		if (ret)
+		if (ret) {
+			ptrace_put_breakpoints(task);
 			return ret;
+		}
 		thread->ptrace_bps[0] = bp;
+		ptrace_put_breakpoints(task);
 		thread->dabr = data;
 		return 0;
 	}
@@ -965,9 +972,12 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
 							ptrace_triggered, task);
 	if (IS_ERR(bp)) {
 		thread->ptrace_bps[0] = NULL;
+		ptrace_put_breakpoints(task);
 		return PTR_ERR(bp);
 	}
 
+	ptrace_put_breakpoints(task);
+
 #endif /* CONFIG_HAVE_HW_BREAKPOINT */
 
 	/* Move contents to the DABR register */

arch/sh/kernel/ptrace_32.c

@@ -117,7 +117,11 @@ void user_enable_single_step(struct task_struct *child)
 
 	set_tsk_thread_flag(child, TIF_SINGLESTEP);
 
+	if (ptrace_get_breakpoints(child) < 0)
+		return;
+
 	set_single_step(child, pc);
+	ptrace_put_breakpoints(child);
 }
 
 void user_disable_single_step(struct task_struct *child)

arch/x86/kernel/cpu/perf_event_intel.c

@@ -184,26 +184,23 @@ static __initconst const u64 snb_hw_cache_event_ids
 	},
  },
  [ C(LL  ) ] = {
-	/*
-	 * TBD: Need Off-core Response Performance Monitoring support
-	 */
 	[ C(OP_READ) ] = {
-		/* OFFCORE_RESPONSE_0.ANY_DATA.LOCAL_CACHE */
+		/* OFFCORE_RESPONSE.ANY_DATA.LOCAL_CACHE */
 		[ C(RESULT_ACCESS) ] = 0x01b7,
-		/* OFFCORE_RESPONSE_1.ANY_DATA.ANY_LLC_MISS */
-		[ C(RESULT_MISS)   ] = 0x01bb,
+		/* OFFCORE_RESPONSE.ANY_DATA.ANY_LLC_MISS */
+		[ C(RESULT_MISS)   ] = 0x01b7,
 	},
 	[ C(OP_WRITE) ] = {
-		/* OFFCORE_RESPONSE_0.ANY_RFO.LOCAL_CACHE */
+		/* OFFCORE_RESPONSE.ANY_RFO.LOCAL_CACHE */
 		[ C(RESULT_ACCESS) ] = 0x01b7,
-		/* OFFCORE_RESPONSE_1.ANY_RFO.ANY_LLC_MISS */
-		[ C(RESULT_MISS)   ] = 0x01bb,
+		/* OFFCORE_RESPONSE.ANY_RFO.ANY_LLC_MISS */
+		[ C(RESULT_MISS)   ] = 0x01b7,
 	},
 	[ C(OP_PREFETCH) ] = {
-		/* OFFCORE_RESPONSE_0.PREFETCH.LOCAL_CACHE */
+		/* OFFCORE_RESPONSE.PREFETCH.LOCAL_CACHE */
 		[ C(RESULT_ACCESS) ] = 0x01b7,
-		/* OFFCORE_RESPONSE_1.PREFETCH.ANY_LLC_MISS */
-		[ C(RESULT_MISS)   ] = 0x01bb,
+		/* OFFCORE_RESPONSE.PREFETCH.ANY_LLC_MISS */
+		[ C(RESULT_MISS)   ] = 0x01b7,
 	},
  },
  [ C(DTLB) ] = {
@@ -285,26 +282,26 @@ static __initconst const u64 westmere_hw_cache_event_ids
  },
  [ C(LL  ) ] = {
 	[ C(OP_READ) ] = {
-		/* OFFCORE_RESPONSE_0.ANY_DATA.LOCAL_CACHE */
+		/* OFFCORE_RESPONSE.ANY_DATA.LOCAL_CACHE */
 		[ C(RESULT_ACCESS) ] = 0x01b7,
-		/* OFFCORE_RESPONSE_1.ANY_DATA.ANY_LLC_MISS */
-		[ C(RESULT_MISS)   ] = 0x01bb,
+		/* OFFCORE_RESPONSE.ANY_DATA.ANY_LLC_MISS */
+		[ C(RESULT_MISS)   ] = 0x01b7,
 	},
 	/*
 	 * Use RFO, not WRITEBACK, because a write miss would typically occur
 	 * on RFO.
 	 */
 	[ C(OP_WRITE) ] = {
-		/* OFFCORE_RESPONSE_1.ANY_RFO.LOCAL_CACHE */
-		[ C(RESULT_ACCESS) ] = 0x01bb,
-		/* OFFCORE_RESPONSE_0.ANY_RFO.ANY_LLC_MISS */
+		/* OFFCORE_RESPONSE.ANY_RFO.LOCAL_CACHE */
+		[ C(RESULT_ACCESS) ] = 0x01b7,
+		/* OFFCORE_RESPONSE.ANY_RFO.ANY_LLC_MISS */
 		[ C(RESULT_MISS)   ] = 0x01b7,
 	},
 	[ C(OP_PREFETCH) ] = {
-		/* OFFCORE_RESPONSE_0.PREFETCH.LOCAL_CACHE */
+		/* OFFCORE_RESPONSE.PREFETCH.LOCAL_CACHE */
 		[ C(RESULT_ACCESS) ] = 0x01b7,
-		/* OFFCORE_RESPONSE_1.PREFETCH.ANY_LLC_MISS */
-		[ C(RESULT_MISS)   ] = 0x01bb,
+		/* OFFCORE_RESPONSE.PREFETCH.ANY_LLC_MISS */
+		[ C(RESULT_MISS)   ] = 0x01b7,
 	},
  },
  [ C(DTLB) ] = {
@@ -352,16 +349,36 @@ static __initconst const u64 westmere_hw_cache_event_ids
 };
 
 /*
- * OFFCORE_RESPONSE MSR bits (subset), See IA32 SDM Vol 3 30.6.1.3
+ * Nehalem/Westmere MSR_OFFCORE_RESPONSE bits;
+ * See IA32 SDM Vol 3B 30.6.1.3
  */
 
-#define DMND_DATA_RD     (1 << 0)
-#define DMND_RFO         (1 << 1)
-#define DMND_WB          (1 << 3)
-#define PF_DATA_RD       (1 << 4)
-#define PF_DATA_RFO      (1 << 5)
-#define RESP_UNCORE_HIT  (1 << 8)
-#define RESP_MISS        (0xf600) /* non uncore hit */
+#define NHM_DMND_DATA_RD	(1 << 0)
+#define NHM_DMND_RFO		(1 << 1)
+#define NHM_DMND_IFETCH		(1 << 2)
+#define NHM_DMND_WB		(1 << 3)
+#define NHM_PF_DATA_RD		(1 << 4)
+#define NHM_PF_DATA_RFO		(1 << 5)
+#define NHM_PF_IFETCH		(1 << 6)
+#define NHM_OFFCORE_OTHER	(1 << 7)
+#define NHM_UNCORE_HIT		(1 << 8)
+#define NHM_OTHER_CORE_HIT_SNP	(1 << 9)
+#define NHM_OTHER_CORE_HITM	(1 << 10)
+        			/* reserved */
+#define NHM_REMOTE_CACHE_FWD	(1 << 12)
+#define NHM_REMOTE_DRAM		(1 << 13)
+#define NHM_LOCAL_DRAM		(1 << 14)
+#define NHM_NON_DRAM		(1 << 15)
+
+#define NHM_ALL_DRAM		(NHM_REMOTE_DRAM|NHM_LOCAL_DRAM)
+
+#define NHM_DMND_READ		(NHM_DMND_DATA_RD)
+#define NHM_DMND_WRITE		(NHM_DMND_RFO|NHM_DMND_WB)
+#define NHM_DMND_PREFETCH	(NHM_PF_DATA_RD|NHM_PF_DATA_RFO)
+
+#define NHM_L3_HIT	(NHM_UNCORE_HIT|NHM_OTHER_CORE_HIT_SNP|NHM_OTHER_CORE_HITM)
+#define NHM_L3_MISS	(NHM_NON_DRAM|NHM_ALL_DRAM|NHM_REMOTE_CACHE_FWD)
+#define NHM_L3_ACCESS	(NHM_L3_HIT|NHM_L3_MISS)
 
 static __initconst const u64 nehalem_hw_cache_extra_regs
 				[PERF_COUNT_HW_CACHE_MAX]
@@ -370,16 +387,16 @@ static __initconst const u64 nehalem_hw_cache_extra_regs
 {
  [ C(LL  ) ] = {
 	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = DMND_DATA_RD|RESP_UNCORE_HIT,
-		[ C(RESULT_MISS)   ] = DMND_DATA_RD|RESP_MISS,
+		[ C(RESULT_ACCESS) ] = NHM_DMND_READ|NHM_L3_ACCESS,
+		[ C(RESULT_MISS)   ] = NHM_DMND_READ|NHM_L3_MISS,
 	},
 	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = DMND_RFO|DMND_WB|RESP_UNCORE_HIT,
-		[ C(RESULT_MISS)   ] = DMND_RFO|DMND_WB|RESP_MISS,
+		[ C(RESULT_ACCESS) ] = NHM_DMND_WRITE|NHM_L3_ACCESS,
+		[ C(RESULT_MISS)   ] = NHM_DMND_WRITE|NHM_L3_MISS,
 	},
 	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = PF_DATA_RD|PF_DATA_RFO|RESP_UNCORE_HIT,
-		[ C(RESULT_MISS)   ] = PF_DATA_RD|PF_DATA_RFO|RESP_MISS,
+		[ C(RESULT_ACCESS) ] = NHM_DMND_PREFETCH|NHM_L3_ACCESS,
+		[ C(RESULT_MISS)   ] = NHM_DMND_PREFETCH|NHM_L3_MISS,
 	},
  }
 };

arch/x86/kernel/ptrace.c

@@ -608,6 +608,9 @@ static int ptrace_write_dr7(struct task_struct *tsk, unsigned long data)
 	unsigned len, type;
 	struct perf_event *bp;
 
+	if (ptrace_get_breakpoints(tsk) < 0)
+		return -ESRCH;
+
 	data &= ~DR_CONTROL_RESERVED;
 	old_dr7 = ptrace_get_dr7(thread->ptrace_bps);
 restore:
@@ -655,6 +658,9 @@ restore:
 		}
 		goto restore;
 	}
+
+	ptrace_put_breakpoints(tsk);
+
 	return ((orig_ret < 0) ? orig_ret : rc);
 }
 
@@ -668,10 +674,17 @@ static unsigned long ptrace_get_debugreg(struct task_struct *tsk, int n)
 
 	if (n < HBP_NUM) {
 		struct perf_event *bp;
+
+		if (ptrace_get_breakpoints(tsk) < 0)
+			return -ESRCH;
+
 		bp = thread->ptrace_bps[n];
 		if (!bp)
-			return 0;
-		val = bp->hw.info.address;
+			val = 0;
+		else
+			val = bp->hw.info.address;
+
+		ptrace_put_breakpoints(tsk);
 	} else if (n == 6) {
 		val = thread->debugreg6;
 	 } else if (n == 7) {
@@ -686,6 +699,10 @@ static int ptrace_set_breakpoint_addr(struct task_struct *tsk, int nr,
 	struct perf_event *bp;
 	struct thread_struct *t = &tsk->thread;
 	struct perf_event_attr attr;
+	int err = 0;
+
+	if (ptrace_get_breakpoints(tsk) < 0)
+		return -ESRCH;
 
 	if (!t->ptrace_bps[nr]) {
 		ptrace_breakpoint_init(&attr);
@@ -709,24 +726,23 @@ static int ptrace_set_breakpoint_addr(struct task_struct *tsk, int nr,
 		 * writing for the user. And anyway this is the previous
 		 * behaviour.
 		 */
-		if (IS_ERR(bp))
-			return PTR_ERR(bp);
+		if (IS_ERR(bp)) {
+			err = PTR_ERR(bp);
+			goto put;
+		}
 
 		t->ptrace_bps[nr] = bp;
 	} else {
-		int err;
-
 		bp = t->ptrace_bps[nr];
 
 		attr = bp->attr;
 		attr.bp_addr = addr;
 		err = modify_user_hw_breakpoint(bp, &attr);
-		if (err)
-			return err;
 	}
 
-
-	return 0;
+put:
+	ptrace_put_breakpoints(tsk);
+	return err;
 }
 
 /*

drivers/block/rbd.c

@@ -777,9 +777,9 @@ static int rbd_do_request(struct request *rq,
 				      ops,
 				      false,
 				      GFP_NOIO, pages, bio);
-	if (IS_ERR(req)) {
+	if (!req) {
 		up_read(&header->snap_rwsem);
-		ret = PTR_ERR(req);
+		ret = -ENOMEM;
 		goto done_pages;
 	}
 

drivers/firewire/ohci.c

@@ -2199,7 +2199,6 @@ static int ohci_set_config_rom(struct fw_card *card,
 {
 	struct fw_ohci *ohci;
 	unsigned long flags;
-	int ret = -EBUSY;
 	__be32 *next_config_rom;
 	dma_addr_t uninitialized_var(next_config_rom_bus);
 
@@ -2240,22 +2239,37 @@ static int ohci_set_config_rom(struct fw_card *card,
 
 	spin_lock_irqsave(&ohci->lock, flags);
 
+	/*
+	 * If there is not an already pending config_rom update,
+	 * push our new allocation into the ohci->next_config_rom
+	 * and then mark the local variable as null so that we
+	 * won't deallocate the new buffer.
+	 *
+	 * OTOH, if there is a pending config_rom update, just
+	 * use that buffer with the new config_rom data, and
+	 * let this routine free the unused DMA allocation.
+	 */
+
 	if (ohci->next_config_rom == NULL) {
 		ohci->next_config_rom = next_config_rom;
 		ohci->next_config_rom_bus = next_config_rom_bus;
+		next_config_rom = NULL;
+	}
 
-		copy_config_rom(ohci->next_config_rom, config_rom, length);
+	copy_config_rom(ohci->next_config_rom, config_rom, length);
 
-		ohci->next_header = config_rom[0];
-		ohci->next_config_rom[0] = 0;
+	ohci->next_header = config_rom[0];
+	ohci->next_config_rom[0] = 0;
 
-		reg_write(ohci, OHCI1394_ConfigROMmap,
-			  ohci->next_config_rom_bus);
-		ret = 0;
-	}
+	reg_write(ohci, OHCI1394_ConfigROMmap, ohci->next_config_rom_bus);
 
 	spin_unlock_irqrestore(&ohci->lock, flags);
 
+	/* If we didn't use the DMA allocation, delete it. */
+	if (next_config_rom != NULL)
+		dma_free_coherent(ohci->card.device, CONFIG_ROM_SIZE,
+				  next_config_rom, next_config_rom_bus);
+
 	/*
 	 * Now initiate a bus reset to have the changes take
 	 * effect. We clean up the old config rom memory and DMA
@@ -2263,13 +2277,10 @@ static int ohci_set_config_rom(struct fw_card *card,
 	 * controller could need to access it before the bus reset
 	 * takes effect.
 	 */
-	if (ret == 0)
-		fw_schedule_bus_reset(&ohci->card, true, true);
-	else
-		dma_free_coherent(ohci->card.device, CONFIG_ROM_SIZE,
-				  next_config_rom, next_config_rom_bus);
 
-	return ret;
+	fw_schedule_bus_reset(&ohci->card, true, true);
+
+	return 0;
 }
 
 static void ohci_send_request(struct fw_card *card, struct fw_packet *packet)

drivers/gpu/drm/drm_mm.c

@@ -431,7 +431,7 @@ EXPORT_SYMBOL(drm_mm_search_free_in_range);
 void drm_mm_replace_node(struct drm_mm_node *old, struct drm_mm_node *new)
 {
 	list_replace(&old->node_list, &new->node_list);
-	list_replace(&old->node_list, &new->hole_stack);
+	list_replace(&old->hole_stack, &new->hole_stack);
 	new->hole_follows = old->hole_follows;
 	new->mm = old->mm;
 	new->start = old->start;
@@ -699,8 +699,8 @@ int drm_mm_dump_table(struct seq_file *m, struct drm_mm *mm)
 				entry->size);
 		total_used += entry->size;
 		if (entry->hole_follows) {
-			hole_start = drm_mm_hole_node_start(&mm->head_node);
-			hole_end = drm_mm_hole_node_end(&mm->head_node);
+			hole_start = drm_mm_hole_node_start(entry);
+			hole_end = drm_mm_hole_node_end(entry);
 			hole_size = hole_end - hole_start;
 			seq_printf(m, "0x%08lx-0x%08lx: 0x%08lx: free\n",
 					hole_start, hole_end, hole_size);

drivers/gpu/drm/i915/intel_display.c

@@ -5154,8 +5154,6 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 
 	I915_WRITE(DSPCNTR(plane), dspcntr);
 	POSTING_READ(DSPCNTR(plane));
-	if (!HAS_PCH_SPLIT(dev))
-		intel_enable_plane(dev_priv, plane, pipe);
 
 	ret = intel_pipe_set_base(crtc, x, y, old_fb);
 
@@ -5605,9 +5603,9 @@ static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc)
 	intel_clock_t clock;
 
 	if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
-		fp = FP0(pipe);
+		fp = I915_READ(FP0(pipe));
 	else
-		fp = FP1(pipe);
+		fp = I915_READ(FP1(pipe));
 
 	clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT;
 	if (IS_PINEVIEW(dev)) {
@@ -6579,8 +6577,10 @@ intel_user_framebuffer_create(struct drm_device *dev,
 		return ERR_PTR(-ENOENT);
 
 	intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
-	if (!intel_fb)
+	if (!intel_fb) {
+		drm_gem_object_unreference_unlocked(&obj->base);
 		return ERR_PTR(-ENOMEM);
+	}
 
 	ret = intel_framebuffer_init(dev, intel_fb, mode_cmd, obj);
 	if (ret) {

drivers/gpu/drm/i915/intel_dp.c

@@ -1470,7 +1470,8 @@ intel_dp_link_down(struct intel_dp *intel_dp)
 
 	if (!HAS_PCH_CPT(dev) &&
 	    I915_READ(intel_dp->output_reg) & DP_PIPEB_SELECT) {
-		struct intel_crtc *intel_crtc = to_intel_crtc(intel_dp->base.base.crtc);
+		struct drm_crtc *crtc = intel_dp->base.base.crtc;
+
 		/* Hardware workaround: leaving our transcoder select
 		 * set to transcoder B while it's off will prevent the
 		 * corresponding HDMI output on transcoder A.
@@ -1485,7 +1486,19 @@ intel_dp_link_down(struct intel_dp *intel_dp)
 		/* Changes to enable or select take place the vblank
 		 * after being written.
 		 */
-		intel_wait_for_vblank(dev, intel_crtc->pipe);
+		if (crtc == NULL) {
+			/* We can arrive here never having been attached
+			 * to a CRTC, for instance, due to inheriting
+			 * random state from the BIOS.
+			 *
+			 * If the pipe is not running, play safe and
+			 * wait for the clocks to stabilise before
+			 * continuing.
+			 */
+			POSTING_READ(intel_dp->output_reg);
+			msleep(50);
+		} else
+			intel_wait_for_vblank(dev, to_intel_crtc(crtc)->pipe);
 	}
 
 	I915_WRITE(intel_dp->output_reg, DP & ~DP_PORT_EN);

drivers/gpu/drm/i915/intel_lvds.c

@@ -539,6 +539,9 @@ static int intel_lid_notify(struct notifier_block *nb, unsigned long val,
 	struct drm_device *dev = dev_priv->dev;
 	struct drm_connector *connector = dev_priv->int_lvds_connector;
 
+	if (dev->switch_power_state != DRM_SWITCH_POWER_ON)
+		return NOTIFY_OK;
+
 	/*
 	 * check and update the status of LVDS connector after receiving
 	 * the LID nofication event.

drivers/gpu/drm/nouveau/nouveau_mem.c

@@ -152,8 +152,6 @@ nouveau_mem_vram_fini(struct drm_device *dev)
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 
-	nouveau_bo_ref(NULL, &dev_priv->vga_ram);
-
 	ttm_bo_device_release(&dev_priv->ttm.bdev);
 
 	nouveau_ttm_global_release(dev_priv);

drivers/gpu/drm/nouveau/nouveau_state.c

@@ -768,6 +768,11 @@ static void nouveau_card_takedown(struct drm_device *dev)
 	engine->mc.takedown(dev);
 	engine->display.late_takedown(dev);
 
+	if (dev_priv->vga_ram) {
+		nouveau_bo_unpin(dev_priv->vga_ram);
+		nouveau_bo_ref(NULL, &dev_priv->vga_ram);
+	}
+
 	mutex_lock(&dev->struct_mutex);
 	ttm_bo_clean_mm(&dev_priv->ttm.bdev, TTM_PL_VRAM);
 	ttm_bo_clean_mm(&dev_priv->ttm.bdev, TTM_PL_TT);

drivers/gpu/drm/radeon/radeon_atombios.c

@@ -431,7 +431,7 @@ static bool radeon_atom_apply_quirks(struct drm_device *dev,
 		}
 	}
 
-	/* Acer laptop (Acer TravelMate 5730G) has an HDMI port
+	/* Acer laptop (Acer TravelMate 5730/5730G) has an HDMI port
 	 * on the laptop and a DVI port on the docking station and
 	 * both share the same encoder, hpd pin, and ddc line.
 	 * So while the bios table is technically correct,
@@ -440,7 +440,7 @@ static bool radeon_atom_apply_quirks(struct drm_device *dev,
 	 * with different crtcs which isn't possible on the hardware
 	 * side and leaves no crtcs for LVDS or VGA.
 	 */
-	if ((dev->pdev->device == 0x95c4) &&
+	if (((dev->pdev->device == 0x95c4) || (dev->pdev->device == 0x9591)) &&
 	    (dev->pdev->subsystem_vendor == 0x1025) &&
 	    (dev->pdev->subsystem_device == 0x013c)) {
 		if ((*connector_type == DRM_MODE_CONNECTOR_DVII) &&

drivers/gpu/drm/radeon/radeon_atpx_handler.c

@@ -15,6 +15,9 @@
 #define ATPX_VERSION 0
 #define ATPX_GPU_PWR 2
 #define ATPX_MUX_SELECT 3
+#define ATPX_I2C_MUX_SELECT 4
+#define ATPX_SWITCH_START 5
+#define ATPX_SWITCH_END 6
 
 #define ATPX_INTEGRATED 0
 #define ATPX_DISCRETE 1
@@ -149,13 +152,35 @@ static int radeon_atpx_switch_mux(acpi_handle handle, int mux_id)
 	return radeon_atpx_execute(handle, ATPX_MUX_SELECT, mux_id);
 }
 
+static int radeon_atpx_switch_i2c_mux(acpi_handle handle, int mux_id)
+{
+	return radeon_atpx_execute(handle, ATPX_I2C_MUX_SELECT, mux_id);
+}
+
+static int radeon_atpx_switch_start(acpi_handle handle, int gpu_id)
+{
+	return radeon_atpx_execute(handle, ATPX_SWITCH_START, gpu_id);
+}
+
+static int radeon_atpx_switch_end(acpi_handle handle, int gpu_id)
+{
+	return radeon_atpx_execute(handle, ATPX_SWITCH_END, gpu_id);
+}
 
 static int radeon_atpx_switchto(enum vga_switcheroo_client_id id)
 {
+	int gpu_id;
+
 	if (id == VGA_SWITCHEROO_IGD)
-		radeon_atpx_switch_mux(radeon_atpx_priv.atpx_handle, 0);
+		gpu_id = ATPX_INTEGRATED;
 	else
-		radeon_atpx_switch_mux(radeon_atpx_priv.atpx_handle, 1);
+		gpu_id = ATPX_DISCRETE;
+
+	radeon_atpx_switch_start(radeon_atpx_priv.atpx_handle, gpu_id);
+	radeon_atpx_switch_mux(radeon_atpx_priv.atpx_handle, gpu_id);
+	radeon_atpx_switch_i2c_mux(radeon_atpx_priv.atpx_handle, gpu_id);
+	radeon_atpx_switch_end(radeon_atpx_priv.atpx_handle, gpu_id);
+
 	return 0;
 }
 

drivers/gpu/drm/radeon/radeon_cursor.c

@@ -167,9 +167,6 @@ int radeon_crtc_cursor_set(struct drm_crtc *crtc,
 		return -EINVAL;
 	}
 
-	radeon_crtc->cursor_width = width;
-	radeon_crtc->cursor_height = height;
-
 	obj = drm_gem_object_lookup(crtc->dev, file_priv, handle);
 	if (!obj) {
 		DRM_ERROR("Cannot find cursor object %x for crtc %d\n", handle, radeon_crtc->crtc_id);
@@ -180,6 +177,9 @@ int radeon_crtc_cursor_set(struct drm_crtc *crtc,
 	if (ret)
 		goto fail;
 
+	radeon_crtc->cursor_width = width;
+	radeon_crtc->cursor_height = height;
+
 	radeon_lock_cursor(crtc, true);
 	/* XXX only 27 bit offset for legacy cursor */
 	radeon_set_cursor(crtc, obj, gpu_addr);

drivers/media/dvb/dvb-usb/Kconfig

@@ -356,6 +356,8 @@ config DVB_USB_LME2510
 	select DVB_TDA826X if !DVB_FE_CUSTOMISE
 	select DVB_STV0288 if !DVB_FE_CUSTOMISE
 	select DVB_IX2505V if !DVB_FE_CUSTOMISE
+	select DVB_STV0299 if !DVB_FE_CUSTOMISE
+	select DVB_PLL if !DVB_FE_CUSTOMISE
 	help
 	  Say Y here to support the LME DM04/QQBOX DVB-S USB2.0 .
 

drivers/media/dvb/ngene/ngene-core.c

@@ -1520,6 +1520,7 @@ static int init_channel(struct ngene_channel *chan)
 	if (dev->ci.en && (io & NGENE_IO_TSOUT)) {
 		dvb_ca_en50221_init(adapter, dev->ci.en, 0, 1);
 		set_transfer(chan, 1);
+		chan->dev->channel[2].DataFormatFlags = DF_SWAP32;
 		set_transfer(&chan->dev->channel[2], 1);
 		dvb_register_device(adapter, &chan->ci_dev,
 				    &ngene_dvbdev_ci, (void *) chan,

drivers/media/radio/saa7706h.c

@@ -376,7 +376,7 @@ static int __devinit saa7706h_probe(struct i2c_client *client,
 	v4l_info(client, "chip found @ 0x%02x (%s)\n",
 			client->addr << 1, client->adapter->name);
 
-	state = kmalloc(sizeof(struct saa7706h_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct saa7706h_state), GFP_KERNEL);
 	if (state == NULL)
 		return -ENOMEM;
 	sd = &state->sd;

drivers/media/radio/tef6862.c

@@ -176,7 +176,7 @@ static int __devinit tef6862_probe(struct i2c_client *client,
 	v4l_info(client, "chip found @ 0x%02x (%s)\n",
 			client->addr << 1, client->adapter->name);
 
-	state = kmalloc(sizeof(struct tef6862_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct tef6862_state), GFP_KERNEL);
 	if (state == NULL)
 		return -ENOMEM;
 	state->freq = TEF6862_LO_FREQ;

drivers/media/rc/imon.c

@@ -46,7 +46,7 @@
 #define MOD_AUTHOR	"Jarod Wilson <jarod@wilsonet.com>"
 #define MOD_DESC	"Driver for SoundGraph iMON MultiMedia IR/Display"
 #define MOD_NAME	"imon"
-#define MOD_VERSION	"0.9.2"
+#define MOD_VERSION	"0.9.3"
 
 #define DISPLAY_MINOR_BASE	144
 #define DEVICE_NAME	"lcd%d"
@@ -460,8 +460,9 @@ static int display_close(struct inode *inode, struct file *file)
 }
 
 /**
- * Sends a packet to the device -- this function must be called
- * with ictx->lock held.
+ * Sends a packet to the device -- this function must be called with
+ * ictx->lock held, or its unlock/lock sequence while waiting for tx
+ * to complete can/will lead to a deadlock.
  */
 static int send_packet(struct imon_context *ictx)
 {
@@ -991,12 +992,21 @@ static void imon_touch_display_timeout(unsigned long data)
  * the iMON remotes, and those used by the Windows MCE remotes (which is
  * really just RC-6), but only one or the other at a time, as the signals
  * are decoded onboard the receiver.
+ *
+ * This function gets called two different ways, one way is from
+ * rc_register_device, for initial protocol selection/setup, and the other is
+ * via a userspace-initiated protocol change request, either by direct sysfs
+ * prodding or by something like ir-keytable. In the rc_register_device case,
+ * the imon context lock is already held, but when initiated from userspace,
+ * it is not, so we must acquire it prior to calling send_packet, which
+ * requires that the lock is held.
  */
 static int imon_ir_change_protocol(struct rc_dev *rc, u64 rc_type)
 {
 	int retval;
 	struct imon_context *ictx = rc->priv;
 	struct device *dev = ictx->dev;
+	bool unlock = false;
 	unsigned char ir_proto_packet[] = {
 		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x86 };
 
@@ -1029,6 +1039,11 @@ static int imon_ir_change_protocol(struct rc_dev *rc, u64 rc_type)
 
 	memcpy(ictx->usb_tx_buf, &ir_proto_packet, sizeof(ir_proto_packet));
 
+	if (!mutex_is_locked(&ictx->lock)) {
+		unlock = true;
+		mutex_lock(&ictx->lock);
+	}
+
 	retval = send_packet(ictx);
 	if (retval)
 		goto out;
@@ -1037,6 +1052,9 @@ static int imon_ir_change_protocol(struct rc_dev *rc, u64 rc_type)
 	ictx->pad_mouse = false;
 
 out:
+	if (unlock)
+		mutex_unlock(&ictx->lock);
+
 	return retval;
 }
 
@@ -2134,6 +2152,7 @@ static struct imon_context *imon_init_intf0(struct usb_interface *intf)
 		goto rdev_setup_failed;
 	}
 
+	mutex_unlock(&ictx->lock);
 	return ictx;
 
 rdev_setup_failed:
@@ -2205,6 +2224,7 @@ static struct imon_context *imon_init_intf1(struct usb_interface *intf,
 		goto urb_submit_failed;
 	}
 
+	mutex_unlock(&ictx->lock);
 	return ictx;
 
 urb_submit_failed:
@@ -2299,6 +2319,8 @@ static int __devinit imon_probe(struct usb_interface *interface,
 	usb_set_intfdata(interface, ictx);
 
 	if (ifnum == 0) {
+		mutex_lock(&ictx->lock);
+
 		if (product == 0xffdc && ictx->rf_device) {
 			sysfs_err = sysfs_create_group(&interface->dev.kobj,
 						       &imon_rf_attr_group);
@@ -2309,13 +2331,14 @@ static int __devinit imon_probe(struct usb_interface *interface,
 
 		if (ictx->display_supported)
 			imon_init_display(ictx, interface);
+
+		mutex_unlock(&ictx->lock);
 	}
 
 	dev_info(dev, "iMON device (%04x:%04x, intf%d) on "
 		 "usb<%d:%d> initialized\n", vendor, product, ifnum,
 		 usbdev->bus->busnum, usbdev->devnum);
 
-	mutex_unlock(&ictx->lock);
 	mutex_unlock(&driver_lock);
 
 	return 0;

drivers/media/rc/ite-cir.c

@@ -36,6 +36,7 @@
 #include <linux/io.h>
 #include <linux/interrupt.h>
 #include <linux/sched.h>
+#include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/input.h>
 #include <linux/bitops.h>

drivers/media/rc/mceusb.c

@@ -220,6 +220,8 @@ static struct usb_device_id mceusb_dev_table[] = {
 	{ USB_DEVICE(VENDOR_PHILIPS, 0x206c) },
 	/* Philips/Spinel plus IR transceiver for ASUS */
 	{ USB_DEVICE(VENDOR_PHILIPS, 0x2088) },
+	/* Philips IR transceiver (Dell branded) */
+	{ USB_DEVICE(VENDOR_PHILIPS, 0x2093) },
 	/* Realtek MCE IR Receiver and card reader */
 	{ USB_DEVICE(VENDOR_REALTEK, 0x0161),
 	  .driver_info = MULTIFUNCTION },

drivers/media/rc/rc-main.c

@@ -707,7 +707,8 @@ static void ir_close(struct input_dev *idev)
 {
 	struct rc_dev *rdev = input_get_drvdata(idev);
 
-	rdev->close(rdev);
+	 if (rdev)
+		rdev->close(rdev);
 }
 
 /* class for /sys/class/rc */
@@ -733,6 +734,7 @@ static struct {
 	{ RC_TYPE_SONY,		"sony"		},
 	{ RC_TYPE_RC5_SZ,	"rc-5-sz"	},
 	{ RC_TYPE_LIRC,		"lirc"		},
+	{ RC_TYPE_OTHER,	"other"		},
 };
 
 #define PROTO_NONE	"none"

drivers/media/video/m52790.c

@@ -174,7 +174,7 @@ static int m52790_probe(struct i2c_client *client,
 	v4l_info(client, "chip found @ 0x%x (%s)\n",
 			client->addr << 1, client->adapter->name);
 
-	state = kmalloc(sizeof(struct m52790_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct m52790_state), GFP_KERNEL);
 	if (state == NULL)
 		return -ENOMEM;
 

drivers/media/video/tda9840.c

@@ -171,7 +171,7 @@ static int tda9840_probe(struct i2c_client *client,
 	v4l_info(client, "chip found @ 0x%x (%s)\n",
 			client->addr << 1, client->adapter->name);
 
-	sd = kmalloc(sizeof(struct v4l2_subdev), GFP_KERNEL);
+	sd = kzalloc(sizeof(struct v4l2_subdev), GFP_KERNEL);
 	if (sd == NULL)
 		return -ENOMEM;
 	v4l2_i2c_subdev_init(sd, client, &tda9840_ops);

drivers/media/video/tea6415c.c

@@ -152,7 +152,7 @@ static int tea6415c_probe(struct i2c_client *client,
 
 	v4l_info(client, "chip found @ 0x%x (%s)\n",
 			client->addr << 1, client->adapter->name);
-	sd = kmalloc(sizeof(struct v4l2_subdev), GFP_KERNEL);
+	sd = kzalloc(sizeof(struct v4l2_subdev), GFP_KERNEL);
 	if (sd == NULL)
 		return -ENOMEM;
 	v4l2_i2c_subdev_init(sd, client, &tea6415c_ops);

drivers/media/video/tea6420.c

@@ -125,7 +125,7 @@ static int tea6420_probe(struct i2c_client *client,
 	v4l_info(client, "chip found @ 0x%x (%s)\n",
 			client->addr << 1, client->adapter->name);
 
-	sd = kmalloc(sizeof(struct v4l2_subdev), GFP_KERNEL);
+	sd = kzalloc(sizeof(struct v4l2_subdev), GFP_KERNEL);
 	if (sd == NULL)
 		return -ENOMEM;
 	v4l2_i2c_subdev_init(sd, client, &tea6420_ops);

drivers/media/video/upd64031a.c

@@ -230,7 +230,7 @@ static int upd64031a_probe(struct i2c_client *client,
 	v4l_info(client, "chip found @ 0x%x (%s)\n",
 			client->addr << 1, client->adapter->name);
 
-	state = kmalloc(sizeof(struct upd64031a_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct upd64031a_state), GFP_KERNEL);
 	if (state == NULL)
 		return -ENOMEM;
 	sd = &state->sd;

drivers/media/video/upd64083.c

@@ -202,7 +202,7 @@ static int upd64083_probe(struct i2c_client *client,
 	v4l_info(client, "chip found @ 0x%x (%s)\n",
 			client->addr << 1, client->adapter->name);
 
-	state = kmalloc(sizeof(struct upd64083_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct upd64083_state), GFP_KERNEL);
 	if (state == NULL)
 		return -ENOMEM;
 	sd = &state->sd;

drivers/mfd/omap-usb-host.c

@@ -25,7 +25,6 @@
 #include <linux/dma-mapping.h>
 #include <linux/spinlock.h>
 #include <linux/gpio.h>
-#include <linux/regulator/consumer.h>
 #include <plat/usb.h>
 
 #define USBHS_DRIVER_NAME	"usbhs-omap"
@@ -700,8 +699,7 @@ static int usbhs_enable(struct device *dev)
 	dev_dbg(dev, "starting TI HSUSB Controller\n");
 	if (!pdata) {
 		dev_dbg(dev, "missing platform_data\n");
-		ret =  -ENODEV;
-		goto end_enable;
+		return  -ENODEV;
 	}
 
 	spin_lock_irqsave(&omap->lock, flags);
@@ -915,7 +913,8 @@ static int usbhs_enable(struct device *dev)
 
 end_count:
 	omap->count++;
-	goto end_enable;
+	spin_unlock_irqrestore(&omap->lock, flags);
+	return 0;
 
 err_tll:
 	if (pdata->ehci_data->phy_reset) {
@@ -931,8 +930,6 @@ err_tll:
 	clk_disable(omap->usbhost_fs_fck);
 	clk_disable(omap->usbhost_hs_fck);
 	clk_disable(omap->usbhost_ick);
-
-end_enable:
 	spin_unlock_irqrestore(&omap->lock, flags);
 	return ret;
 }

drivers/platform/x86/eeepc-laptop.c

@@ -585,8 +585,9 @@ static bool eeepc_wlan_rfkill_blocked(struct eeepc_laptop *eeepc)
 	return true;
 }
 
-static void eeepc_rfkill_hotplug(struct eeepc_laptop *eeepc)
+static void eeepc_rfkill_hotplug(struct eeepc_laptop *eeepc, acpi_handle handle)
 {
+	struct pci_dev *port;
 	struct pci_dev *dev;
 	struct pci_bus *bus;
 	bool blocked = eeepc_wlan_rfkill_blocked(eeepc);
@@ -599,9 +600,16 @@ static void eeepc_rfkill_hotplug(struct eeepc_laptop *eeepc)
 	mutex_lock(&eeepc->hotplug_lock);
 
 	if (eeepc->hotplug_slot) {
-		bus = pci_find_bus(0, 1);
+		port = acpi_get_pci_dev(handle);
+		if (!port) {
+			pr_warning("Unable to find port\n");
+			goto out_unlock;
+		}
+
+		bus = port->subordinate;
+
 		if (!bus) {
-			pr_warning("Unable to find PCI bus 1?\n");
+			pr_warning("Unable to find PCI bus?\n");
 			goto out_unlock;
 		}
 
@@ -609,6 +617,7 @@ static void eeepc_rfkill_hotplug(struct eeepc_laptop *eeepc)
 			pr_err("Unable to read PCI config space?\n");
 			goto out_unlock;
 		}
+
 		absent = (l == 0xffffffff);
 
 		if (blocked != absent) {
@@ -647,6 +656,17 @@ out_unlock:
 	mutex_unlock(&eeepc->hotplug_lock);
 }
 
+static void eeepc_rfkill_hotplug_update(struct eeepc_laptop *eeepc, char *node)
+{
+	acpi_status status = AE_OK;
+	acpi_handle handle;
+
+	status = acpi_get_handle(NULL, node, &handle);
+
+	if (ACPI_SUCCESS(status))
+		eeepc_rfkill_hotplug(eeepc, handle);
+}
+
 static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
 {
 	struct eeepc_laptop *eeepc = data;
@@ -654,7 +674,7 @@ static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
 	if (event != ACPI_NOTIFY_BUS_CHECK)
 		return;
 
-	eeepc_rfkill_hotplug(eeepc);
+	eeepc_rfkill_hotplug(eeepc, handle);
 }
 
 static int eeepc_register_rfkill_notifier(struct eeepc_laptop *eeepc,
@@ -672,6 +692,11 @@ static int eeepc_register_rfkill_notifier(struct eeepc_laptop *eeepc,
 						     eeepc);
 		if (ACPI_FAILURE(status))
 			pr_warning("Failed to register notify on %s\n", node);
+		/*
+		 * Refresh pci hotplug in case the rfkill state was
+		 * changed during setup.
+		 */
+		eeepc_rfkill_hotplug(eeepc, handle);
 	} else
 		return -ENODEV;
 
@@ -693,6 +718,12 @@ static void eeepc_unregister_rfkill_notifier(struct eeepc_laptop *eeepc,
 		if (ACPI_FAILURE(status))
 			pr_err("Error removing rfkill notify handler %s\n",
 				node);
+			/*
+			 * Refresh pci hotplug in case the rfkill
+			 * state was changed after
+			 * eeepc_unregister_rfkill_notifier()
+			 */
+		eeepc_rfkill_hotplug(eeepc, handle);
 	}
 }
 
@@ -816,11 +847,7 @@ static void eeepc_rfkill_exit(struct eeepc_laptop *eeepc)
 		rfkill_destroy(eeepc->wlan_rfkill);
 		eeepc->wlan_rfkill = NULL;
 	}
-	/*
-	 * Refresh pci hotplug in case the rfkill state was changed after
-	 * eeepc_unregister_rfkill_notifier()
-	 */
-	eeepc_rfkill_hotplug(eeepc);
+
 	if (eeepc->hotplug_slot)
 		pci_hp_deregister(eeepc->hotplug_slot);
 
@@ -889,11 +916,6 @@ static int eeepc_rfkill_init(struct eeepc_laptop *eeepc)
 	eeepc_register_rfkill_notifier(eeepc, "\\_SB.PCI0.P0P5");
 	eeepc_register_rfkill_notifier(eeepc, "\\_SB.PCI0.P0P6");
 	eeepc_register_rfkill_notifier(eeepc, "\\_SB.PCI0.P0P7");
-	/*
-	 * Refresh pci hotplug in case the rfkill state was changed during
-	 * setup.
-	 */
-	eeepc_rfkill_hotplug(eeepc);
 
 exit:
 	if (result && result != -ENODEV)
@@ -928,8 +950,11 @@ static int eeepc_hotk_restore(struct device *device)
 	struct eeepc_laptop *eeepc = dev_get_drvdata(device);
 
 	/* Refresh both wlan rfkill state and pci hotplug */
-	if (eeepc->wlan_rfkill)
-		eeepc_rfkill_hotplug(eeepc);
+	if (eeepc->wlan_rfkill) {
+		eeepc_rfkill_hotplug_update(eeepc, "\\_SB.PCI0.P0P5");
+		eeepc_rfkill_hotplug_update(eeepc, "\\_SB.PCI0.P0P6");
+		eeepc_rfkill_hotplug_update(eeepc, "\\_SB.PCI0.P0P7");
+	}
 
 	if (eeepc->bluetooth_rfkill)
 		rfkill_set_sw_state(eeepc->bluetooth_rfkill,

drivers/platform/x86/sony-laptop.c

@@ -934,6 +934,14 @@ static ssize_t sony_nc_sysfs_store(struct device *dev,
 /*
  * Backlight device
  */
+struct sony_backlight_props {
+	struct backlight_device *dev;
+	int			handle;
+	u8			offset;
+	u8			maxlvl;
+};
+struct sony_backlight_props sony_bl_props;
+
 static int sony_backlight_update_status(struct backlight_device *bd)
 {
 	return acpi_callsetfunc(sony_nc_acpi_handle, "SBRT",
@@ -954,21 +962,26 @@ static int sony_nc_get_brightness_ng(struct backlight_device *bd)
 {
 	int result;
 	int *handle = (int *)bl_get_data(bd);
+	struct sony_backlight_props *sdev =
+		(struct sony_backlight_props *)bl_get_data(bd);
 
-	sony_call_snc_handle(*handle, 0x0200, &result);
+	sony_call_snc_handle(sdev->handle, 0x0200, &result);
 
-	return result & 0xff;
+	return (result & 0xff) - sdev->offset;
 }
 
 static int sony_nc_update_status_ng(struct backlight_device *bd)
 {
 	int value, result;
 	int *handle = (int *)bl_get_data(bd);
+	struct sony_backlight_props *sdev =
+		(struct sony_backlight_props *)bl_get_data(bd);
 
-	value = bd->props.brightness;
-	sony_call_snc_handle(*handle, 0x0100 | (value << 16), &result);
+	value = bd->props.brightness + sdev->offset;
+	if (sony_call_snc_handle(sdev->handle, 0x0100 | (value << 16), &result))
+		return -EIO;
 
-	return sony_nc_get_brightness_ng(bd);
+	return value;
 }
 
 static const struct backlight_ops sony_backlight_ops = {
@@ -981,8 +994,6 @@ static const struct backlight_ops sony_backlight_ng_ops = {
 	.update_status = sony_nc_update_status_ng,
 	.get_brightness = sony_nc_get_brightness_ng,
 };
-static int backlight_ng_handle;
-static struct backlight_device *sony_backlight_device;
 
 /*
  * New SNC-only Vaios event mapping to driver known keys
@@ -1549,6 +1560,75 @@ static void sony_nc_kbd_backlight_resume(void)
 				&ignore);
 }
 
+static void sony_nc_backlight_ng_read_limits(int handle,
+		struct sony_backlight_props *props)
+{
+	int offset;
+	acpi_status status;
+	u8 brlvl, i;
+	u8 min = 0xff, max = 0x00;
+	struct acpi_object_list params;
+	union acpi_object in_obj;
+	union acpi_object *lvl_enum;
+	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+
+	props->handle = handle;
+	props->offset = 0;
+	props->maxlvl = 0xff;
+
+	offset = sony_find_snc_handle(handle);
+	if (offset < 0)
+		return;
+
+	/* try to read the boundaries from ACPI tables, if we fail the above
+	 * defaults should be reasonable
+	 */
+	params.count = 1;
+	params.pointer = &in_obj;
+	in_obj.type = ACPI_TYPE_INTEGER;
+	in_obj.integer.value = offset;
+	status = acpi_evaluate_object(sony_nc_acpi_handle, "SN06", &params,
+			&buffer);
+	if (ACPI_FAILURE(status))
+		return;
+
+	lvl_enum = (union acpi_object *) buffer.pointer;
+	if (!lvl_enum) {
+		pr_err("No SN06 return object.");
+		return;
+	}
+	if (lvl_enum->type != ACPI_TYPE_BUFFER) {
+		pr_err("Invalid SN06 return object 0x%.2x\n",
+		       lvl_enum->type);
+		goto out_invalid;
+	}
+
+	/* the buffer lists brightness levels available, brightness levels are
+	 * from 0 to 8 in the array, other values are used by ALS control.
+	 */
+	for (i = 0; i < 9 && i < lvl_enum->buffer.length; i++) {
+
+		brlvl = *(lvl_enum->buffer.pointer + i);
+		dprintk("Brightness level: %d\n", brlvl);
+
+		if (!brlvl)
+			break;
+
+		if (brlvl > max)
+			max = brlvl;
+		if (brlvl < min)
+			min = brlvl;
+	}
+	props->offset = min;
+	props->maxlvl = max;
+	dprintk("Brightness levels: min=%d max=%d\n", props->offset,
+			props->maxlvl);
+
+out_invalid:
+	kfree(buffer.pointer);
+	return;
+}
+
 static void sony_nc_backlight_setup(void)
 {
 	acpi_handle unused;
@@ -1557,14 +1637,14 @@ static void sony_nc_backlight_setup(void)
 	struct backlight_properties props;
 
 	if (sony_find_snc_handle(0x12f) != -1) {
-		backlight_ng_handle = 0x12f;
 		ops = &sony_backlight_ng_ops;
-		max_brightness = 0xff;
+		sony_nc_backlight_ng_read_limits(0x12f, &sony_bl_props);
+		max_brightness = sony_bl_props.maxlvl - sony_bl_props.offset;
 
 	} else if (sony_find_snc_handle(0x137) != -1) {
-		backlight_ng_handle = 0x137;
 		ops = &sony_backlight_ng_ops;
-		max_brightness = 0xff;
+		sony_nc_backlight_ng_read_limits(0x137, &sony_bl_props);
+		max_brightness = sony_bl_props.maxlvl - sony_bl_props.offset;
 
 	} else if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle, "GBRT",
 						&unused))) {
@@ -1577,22 +1657,22 @@ static void sony_nc_backlight_setup(void)
 	memset(&props, 0, sizeof(struct backlight_properties));
 	props.type = BACKLIGHT_PLATFORM;
 	props.max_brightness = max_brightness;
-	sony_backlight_device = backlight_device_register("sony", NULL,
-							  &backlight_ng_handle,
-							  ops, &props);
+	sony_bl_props.dev = backlight_device_register("sony", NULL,
+						      &sony_bl_props,
+						      ops, &props);
 
-	if (IS_ERR(sony_backlight_device)) {
-		pr_warning(DRV_PFX "unable to register backlight device\n");
-		sony_backlight_device = NULL;
+	if (IS_ERR(sony_bl_props.dev)) {
+		pr_warn(DRV_PFX "unable to register backlight device\n");
+		sony_bl_props.dev = NULL;
 	} else
-		sony_backlight_device->props.brightness =
-		    ops->get_brightness(sony_backlight_device);
+		sony_bl_props.dev->props.brightness =
+			ops->get_brightness(sony_bl_props.dev);
 }
 
 static void sony_nc_backlight_cleanup(void)
 {
-	if (sony_backlight_device)
-		backlight_device_unregister(sony_backlight_device);
+	if (sony_bl_props.dev)
+		backlight_device_unregister(sony_bl_props.dev);
 }
 
 static int sony_nc_add(struct acpi_device *device)
@@ -2590,7 +2670,7 @@ static long sonypi_misc_ioctl(struct file *fp, unsigned int cmd,
 	mutex_lock(&spic_dev.lock);
 	switch (cmd) {
 	case SONYPI_IOCGBRT:
-		if (sony_backlight_device == NULL) {
+		if (sony_bl_props.dev == NULL) {
 			ret = -EIO;
 			break;
 		}
@@ -2603,7 +2683,7 @@ static long sonypi_misc_ioctl(struct file *fp, unsigned int cmd,
 				ret = -EFAULT;
 		break;
 	case SONYPI_IOCSBRT:
-		if (sony_backlight_device == NULL) {
+		if (sony_bl_props.dev == NULL) {
 			ret = -EIO;
 			break;
 		}
@@ -2617,8 +2697,8 @@ static long sonypi_misc_ioctl(struct file *fp, unsigned int cmd,
 			break;
 		}
 		/* sync the backlight device status */
-		sony_backlight_device->props.brightness =
-		    sony_backlight_get_brightness(sony_backlight_device);
+		sony_bl_props.dev->props.brightness =
+		    sony_backlight_get_brightness(sony_bl_props.dev);
 		break;
 	case SONYPI_IOCGBAT1CAP:
 		if (ec_read16(SONYPI_BAT1_FULL, &val16)) {

drivers/platform/x86/thinkpad_acpi.c

@@ -128,7 +128,8 @@ enum {
 };
 
 /* ACPI HIDs */
-#define TPACPI_ACPI_HKEY_HID		"IBM0068"
+#define TPACPI_ACPI_IBM_HKEY_HID	"IBM0068"
+#define TPACPI_ACPI_LENOVO_HKEY_HID	"LEN0068"
 #define TPACPI_ACPI_EC_HID		"PNP0C09"
 
 /* Input IDs */
@@ -3879,7 +3880,8 @@ errexit:
 }
 
 static const struct acpi_device_id ibm_htk_device_ids[] = {
-	{TPACPI_ACPI_HKEY_HID, 0},
+	{TPACPI_ACPI_IBM_HKEY_HID, 0},
+	{TPACPI_ACPI_LENOVO_HKEY_HID, 0},
 	{"", 0},
 };
 

drivers/scsi/scsi_lib.c

@@ -400,10 +400,15 @@ static inline int scsi_host_is_busy(struct Scsi_Host *shost)
 static void scsi_run_queue(struct request_queue *q)
 {
 	struct scsi_device *sdev = q->queuedata;
-	struct Scsi_Host *shost = sdev->host;
+	struct Scsi_Host *shost;
 	LIST_HEAD(starved_list);
 	unsigned long flags;
 
+	/* if the device is dead, sdev will be NULL, so no queue to run */
+	if (!sdev)
+		return;
+
+	shost = sdev->host;
 	if (scsi_target(sdev)->single_lun)
 		scsi_single_lun_run(sdev);
 

drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c

@@ -2288,7 +2288,3 @@ err_dev:
 	free_netdev(dev);
 	return NULL;
 }
-
-EXPORT_SYMBOL(init_ft1000_card);
-EXPORT_SYMBOL(stop_ft1000_card);
-EXPORT_SYMBOL(flarion_ft1000_cnt);

drivers/staging/ft1000/ft1000-pcmcia/ft1000_proc.c

@@ -214,6 +214,3 @@ void ft1000CleanupProc(struct net_device *dev)
 	remove_proc_entry(FT1000_PROC, init_net.proc_net);
 	unregister_netdevice_notifier(&ft1000_netdev_notifier);
 }
-
-EXPORT_SYMBOL(ft1000InitProc);
-EXPORT_SYMBOL(ft1000CleanupProc);

drivers/staging/gma500/Kconfig

@@ -1,6 +1,6 @@
 config DRM_PSB
 	tristate "Intel GMA500 KMS Framebuffer"
-	depends on DRM && PCI
+	depends on DRM && PCI && X86
 	select FB_CFB_COPYAREA
         select FB_CFB_FILLRECT
         select FB_CFB_IMAGEBLIT

drivers/staging/intel_sst/intelmid_v1_control.c

@@ -28,6 +28,7 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/pci.h>
+#include <linux/delay.h>
 #include <linux/file.h>
 #include <asm/mrst.h>
 #include <sound/pcm.h>

drivers/staging/intel_sst/intelmid_v2_control.c

@@ -29,6 +29,7 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/pci.h>
+#include <linux/delay.h>
 #include <linux/file.h>
 #include "intel_sst.h"
 #include "intelmid_snd_control.h"

drivers/staging/olpc_dcon/olpc_dcon_xo_1.c

@@ -12,6 +12,7 @@
  */
 #include <linux/cs5535.h>
 #include <linux/gpio.h>
+#include <linux/delay.h>
 #include <asm/olpc.h>
 
 #include "olpc_dcon.h"

drivers/staging/rts_pstor/debug.h

@@ -28,7 +28,7 @@
 
 #define RTSX_STOR "rts_pstor: "
 
-#if CONFIG_RTS_PSTOR_DEBUG
+#ifdef CONFIG_RTS_PSTOR_DEBUG
 #define RTSX_DEBUGP(x...) printk(KERN_DEBUG RTSX_STOR x)
 #define RTSX_DEBUGPN(x...) printk(KERN_DEBUG x)
 #define RTSX_DEBUGPX(x...) printk(x)

drivers/staging/rts_pstor/ms.c

@@ -23,6 +23,7 @@
 #include <linux/blkdev.h>
 #include <linux/kthread.h>
 #include <linux/sched.h>
+#include <linux/vmalloc.h>
 
 #include "rtsx.h"
 #include "rtsx_transport.h"

drivers/staging/rts_pstor/rtsx_chip.c

@@ -24,6 +24,7 @@
 #include <linux/kthread.h>
 #include <linux/sched.h>
 #include <linux/workqueue.h>
+#include <linux/vmalloc.h>
 
 #include "rtsx.h"
 #include "rtsx_transport.h"
@@ -1311,11 +1312,11 @@ void rtsx_polling_func(struct rtsx_chip *chip)
 
 #ifdef SUPPORT_OCP
 	if (CHECK_LUN_MODE(chip, SD_MS_2LUN)) {
-		#if CONFIG_RTS_PSTOR_DEBUG
+#ifdef CONFIG_RTS_PSTOR_DEBUG
 		if (chip->ocp_stat & (SD_OC_NOW | SD_OC_EVER | MS_OC_NOW | MS_OC_EVER)) {
 			RTSX_DEBUGP("Over current, OCPSTAT is 0x%x\n", chip->ocp_stat);
 		}
-		#endif
+#endif
 
 		if (chip->ocp_stat & (SD_OC_NOW | SD_OC_EVER)) {
 			if (chip->card_exist & SD_CARD) {

drivers/staging/rts_pstor/rtsx_scsi.c

@@ -23,6 +23,7 @@
 #include <linux/blkdev.h>
 #include <linux/kthread.h>
 #include <linux/sched.h>
+#include <linux/vmalloc.h>
 
 #include "rtsx.h"
 #include "rtsx_transport.h"

drivers/staging/rts_pstor/sd.c

@@ -909,7 +909,7 @@ static int sd_change_phase(struct rtsx_chip *chip, u8 sample_point, u8 tune_dir)
 		RTSX_WRITE_REG(chip, SD_VPCLK0_CTL, PHASE_NOT_RESET, PHASE_NOT_RESET);
 		RTSX_WRITE_REG(chip, CLK_CTL, CHANGE_CLK, 0);
 	} else {
-#if CONFIG_RTS_PSTOR_DEBUG
+#ifdef CONFIG_RTS_PSTOR_DEBUG
 		rtsx_read_register(chip, SD_VP_CTL, &val);
 		RTSX_DEBUGP("SD_VP_CTL: 0x%x\n", val);
 		rtsx_read_register(chip, SD_DCMPS_CTL, &val);
@@ -958,7 +958,7 @@ static int sd_change_phase(struct rtsx_chip *chip, u8 sample_point, u8 tune_dir)
 	return STATUS_SUCCESS;
 
 Fail:
-#if CONFIG_RTS_PSTOR_DEBUG
+#ifdef CONFIG_RTS_PSTOR_DEBUG
 	rtsx_read_register(chip, SD_VP_CTL, &val);
 	RTSX_DEBUGP("SD_VP_CTL: 0x%x\n", val);
 	rtsx_read_register(chip, SD_DCMPS_CTL, &val);

drivers/staging/rts_pstor/trace.h

@@ -82,7 +82,7 @@ do {													\
 #define TRACE_GOTO(chip, label)	goto label
 #endif
 
-#if CONFIG_RTS_PSTOR_DEBUG
+#ifdef CONFIG_RTS_PSTOR_DEBUG
 static inline void rtsx_dump(u8 *buf, int buf_len)
 {
 	int i;

drivers/staging/rts_pstor/xd.c

@@ -23,6 +23,7 @@
 #include <linux/blkdev.h>
 #include <linux/kthread.h>
 #include <linux/sched.h>
+#include <linux/vmalloc.h>
 
 #include "rtsx.h"
 #include "rtsx_transport.h"

drivers/staging/solo6x10/Kconfig

@@ -2,6 +2,7 @@ config SOLO6X10
 	tristate "Softlogic 6x10 MPEG codec cards"
 	depends on PCI && VIDEO_DEV && SND && I2C
 	select VIDEOBUF_DMA_SG
+	select SND_PCM
 	---help---
 	  This driver supports the Softlogic based MPEG-4 and h.264 codec
 	  codec cards.

drivers/staging/usbip/vhci_hcd.c

@@ -876,8 +876,10 @@ static void vhci_shutdown_connection(struct usbip_device *ud)
 	}
 
 	/* kill threads related to this sdev, if v.c. exists */
-	kthread_stop(vdev->ud.tcp_rx);
-	kthread_stop(vdev->ud.tcp_tx);
+	if (vdev->ud.tcp_rx)
+		kthread_stop(vdev->ud.tcp_rx);
+	if (vdev->ud.tcp_tx)
+		kthread_stop(vdev->ud.tcp_tx);
 
 	usbip_uinfo("stop threads\n");
 
@@ -949,9 +951,6 @@ static void vhci_device_init(struct vhci_device *vdev)
 {
 	memset(vdev, 0, sizeof(*vdev));
 
-	vdev->ud.tcp_rx = kthread_create(vhci_rx_loop, &vdev->ud, "vhci_rx");
-	vdev->ud.tcp_tx = kthread_create(vhci_tx_loop, &vdev->ud, "vhci_tx");
-
 	vdev->ud.side   = USBIP_VHCI;
 	vdev->ud.status = VDEV_ST_NULL;
 	/* vdev->ud.lock   = SPIN_LOCK_UNLOCKED; */
@@ -1139,7 +1138,7 @@ static int vhci_hcd_probe(struct platform_device *pdev)
 		usbip_uerr("create hcd failed\n");
 		return -ENOMEM;
 	}
-
+	hcd->has_tt = 1;
 
 	/* this is private data for vhci_hcd */
 	the_controller = hcd_to_vhci(hcd);

drivers/staging/usbip/vhci_sysfs.c

@@ -21,6 +21,7 @@
 #include "vhci.h"
 
 #include <linux/in.h>
+#include <linux/kthread.h>
 
 /* TODO: refine locking ?*/
 
@@ -220,13 +221,13 @@ static ssize_t store_attach(struct device *dev, struct device_attribute *attr,
 	vdev->ud.tcp_socket = socket;
 	vdev->ud.status     = VDEV_ST_NOTASSIGNED;
 
-	wake_up_process(vdev->ud.tcp_rx);
-	wake_up_process(vdev->ud.tcp_tx);
-
 	spin_unlock(&vdev->ud.lock);
 	spin_unlock(&the_controller->lock);
 	/* end the lock */
 
+	vdev->ud.tcp_rx = kthread_run(vhci_rx_loop, &vdev->ud, "vhci_rx");
+	vdev->ud.tcp_tx = kthread_run(vhci_tx_loop, &vdev->ud, "vhci_tx");
+
 	rh_port_connect(rhport, speed);
 
 	return count;

drivers/staging/wlan-ng/cfg80211.c

@@ -273,7 +273,7 @@ exit:
 }
 
 int prism2_set_default_key(struct wiphy *wiphy, struct net_device *dev,
-			   u8 key_index)
+			   u8 key_index, bool unicast, bool multicast)
 {
 	wlandevice_t *wlandev = dev->ml_priv;