ARM: ux500: core U9540 support

This adds support for the U9540 variant of the U8500 series. This
is an application processor without internal modem. This is the
most basic part with ASIC ID, CPU-related fixes, IRQ list, register
ranges, timer, UART, and L2 cache setup. This is based on a patch
by Michel Jaouen which was rewritten to fit with the latest 3.3
kernel.

ChangeLog v1->v2: deleted the irqs-db9540.h file since we expect to
  migrate to using Device Tree for getting the IRQs to devices.
ChangeLog v2->v3: introduced a fixed virtual offset for the ROM
  as suggested by Arnd Bergmann.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sebastien Pasdeloup <sebastien.pasdeloup-nonst@stericsson.com>
Signed-off-by: Michel Jaouen <michel.jaouen@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

arch/arm/mach-ux500/board-mop500-uib.c

@@ -102,7 +102,7 @@ static int __init mop500_uib_init(void)
 	struct i2c_adapter *i2c0;
 	int ret;
 
-	if (!cpu_is_u8500())
+	if (!cpu_is_u8500_family())
 		return -ENODEV;
 
 	if (uib) {

arch/arm/mach-ux500/cache-l2x0.c

@@ -36,9 +36,11 @@ static int __init ux500_l2x0_unlock(void)
 
 static int __init ux500_l2x0_init(void)
 {
+	u32 aux_val = 0x3e000000;
+
 	if (cpu_is_u5500())
 		l2x0_base = __io_address(U5500_L2CC_BASE);
-	else if (cpu_is_u8500())
+	else if (cpu_is_u8500_family())
 		l2x0_base = __io_address(U8500_L2CC_BASE);
 	else
 		ux500_unknown_soc();
@@ -46,11 +48,19 @@ static int __init ux500_l2x0_init(void)
 	/* Unlock before init */
 	ux500_l2x0_unlock();
 
+	/* DB9540's L2 has 128KB way size */
+	if (cpu_is_u9540())
+		/* 128KB way size */
+		aux_val |= (0x4 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT);
+	else
+		/* 64KB way size */
+		aux_val |= (0x3 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT);
+
 	/* 64KB way size, 8 way associativity, force WA */
 	if (of_have_populated_dt())
-		l2x0_of_init(0x3e060000, 0xc0000fff);
+		l2x0_of_init(aux_val, 0xc0000fff);
 	else
-		l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff);
+		l2x0_init(l2x0_base, aux_val, 0xc0000fff);
 
 	/*
 	 * We can't disable l2 as we are in non secure mode, currently

arch/arm/mach-ux500/clock.c

@@ -151,7 +151,7 @@ static unsigned long clk_mtu_get_rate(struct clk *clk)
 
 	if (cpu_is_u5500())
 		addr = __io_address(U5500_PRCMU_BASE);
-	else if (cpu_is_u8500())
+	else if (cpu_is_u8500_family())
 		addr = __io_address(U8500_PRCMU_BASE);
 	else
 		ux500_unknown_soc();

arch/arm/mach-ux500/cpu-db8500.c

@@ -34,8 +34,8 @@ static struct map_desc u8500_uart_io_desc[] __initdata = {
 	__IO_DEV_DESC(U8500_UART0_BASE, SZ_4K),
 	__IO_DEV_DESC(U8500_UART2_BASE, SZ_4K),
 };
-
-static struct map_desc u8500_io_desc[] __initdata = {
+/*  U8500 and U9540 common io_desc */
+static struct map_desc u8500_common_io_desc[] __initdata = {
 	/* SCU base also covers GIC CPU BASE and TWD with its 4K page */
 	__IO_DEV_DESC(U8500_SCU_BASE, SZ_4K),
 	__IO_DEV_DESC(U8500_GIC_DIST_BASE, SZ_4K),
@@ -66,7 +66,7 @@ void __init u8500_map_io(void)
 
 	ux500_map_io();
 
-	iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc));
+	iotable_init(u8500_common_io_desc, ARRAY_SIZE(u8500_common_io_desc));
 
 	_PRCMU_BASE = __io_address(U8500_PRCMU_BASE);
 }

arch/arm/mach-ux500/cpu.c

@@ -43,7 +43,7 @@ void __init ux500_init_irq(void)
 	if (cpu_is_u5500()) {
 		dist_base = __io_address(U5500_GIC_DIST_BASE);
 		cpu_base = __io_address(U5500_GIC_CPU_BASE);
-	} else if (cpu_is_u8500()) {
+	} else if (cpu_is_u8500_family()) {
 		dist_base = __io_address(U8500_GIC_DIST_BASE);
 		cpu_base = __io_address(U8500_GIC_CPU_BASE);
 	} else
@@ -62,7 +62,7 @@ void __init ux500_init_irq(void)
 	 */
 	if (cpu_is_u5500())
 		db5500_prcmu_early_init();
-	if (cpu_is_u8500())
+	if (cpu_is_u8500_family())
 		db8500_prcmu_early_init();
 	clk_init();
 }

arch/arm/mach-ux500/id.c

@@ -23,7 +23,7 @@ static unsigned int ux500_read_asicid(phys_addr_t addr)
 {
 	phys_addr_t base = addr & ~0xfff;
 	struct map_desc desc = {
-		.virtual	= IO_ADDRESS(base),
+		.virtual	= UX500_VIRT_ROM,
 		.pfn		= __phys_to_pfn(base),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
@@ -35,7 +35,7 @@ static unsigned int ux500_read_asicid(phys_addr_t addr)
 	local_flush_tlb_all();
 	flush_cache_all();
 
-	return readl(__io_address(addr));
+	return readl(IOMEM(UX500_VIRT_ROM + (addr & 0xfff)));
 }
 
 static void ux500_print_soc_info(unsigned int asicid)
@@ -67,6 +67,7 @@ static unsigned int partnumber(unsigned int asicid)
  * DB8500v2	0x412fc091	0x9001DBF4		0x008500B0
  * DB8520v2.2	0x412fc091	0x9001DBF4		0x008500B2
  * DB5500v1	0x412fc091	0x9001FFF4		0x005500A0
+ * DB9540	0x413fc090	0xFFFFDBF4		0x009540xx
  */
 
 void __init ux500_map_io(void)
@@ -91,6 +92,10 @@ void __init ux500_map_io(void)
 		/* DB5500v1 */
 		addr = 0x9001FFF4;
 		break;
+
+	case 0x413fc090: /* DB9540 */
+		addr = 0xFFFFDBF4;
+		break;
 	}
 
 	if (addr)

arch/arm/mach-ux500/include/mach/db8500-regs.h

@@ -41,6 +41,10 @@
 /* ASIC ID is at 0xbf4 offset within this region */
 #define U8500_ASIC_ID_BASE	0x9001D000
 
+#define U9540_BOOT_ROM_BASE	0xFFFE0000
+/* ASIC ID is at 0xbf4 offset within this region */
+#define U9540_ASIC_ID_BASE	0xFFFFD000
+
 #define U8500_PER6_BASE		0xa03c0000
 #define U8500_PER7_BASE		0xa03d0000
 #define U8500_PER5_BASE		0xa03e0000
@@ -96,7 +100,9 @@
 #define U8500_SCR_BASE		(U8500_PER4_BASE + 0x05000)
 #define U8500_DMC_BASE		(U8500_PER4_BASE + 0x06000)
 #define U8500_PRCMU_BASE	(U8500_PER4_BASE + 0x07000)
+#define U9540_DMC1_BASE		(U8500_PER4_BASE + 0x0A000)
 #define U8500_PRCMU_TCDM_BASE	(U8500_PER4_BASE + 0x68000)
+#define U9540_PRCMU_TCDM_BASE	(U8500_PER4_BASE + 0x6A000)
 #define U8500_PRCMU_TCPM_BASE   (U8500_PER4_BASE + 0x60000)
 #define U8500_PRCMU_TIMER_3_BASE (U8500_PER4_BASE + 0x07338)
 #define U8500_PRCMU_TIMER_4_BASE (U8500_PER4_BASE + 0x07450)

arch/arm/mach-ux500/include/mach/hardware.h

@@ -17,6 +17,8 @@
  */
 #define U8500_IO_VIRTUAL	0xf0000000
 #define U8500_IO_PHYSICAL	0xa0000000
+/* This is where we map in the ROM to check ASIC IDs */
+#define UX500_VIRT_ROM		0xf0000000
 
 /* This macro is used in assembly, so no cast */
 #define IO_ADDRESS(x)           \
@@ -24,6 +26,7 @@
 
 /* typesafe io address */
 #define __io_address(n)		IOMEM(IO_ADDRESS(n))
+
 /* Used by some plat-nomadik code */
 #define io_p2v(n)		__io_address(n)
 

arch/arm/mach-ux500/include/mach/id.h

@@ -41,6 +41,16 @@ static inline bool __attribute_const__ cpu_is_u8500(void)
 	return dbx500_partnumber() == 0x8500;
 }
 
+static inline bool __attribute_const__ cpu_is_u9540(void)
+{
+	return dbx500_partnumber() == 0x9540;
+}
+
+static inline bool cpu_is_u8500_family(void)
+{
+	return cpu_is_u8500() || cpu_is_u9540();
+}
+
 static inline bool __attribute_const__ cpu_is_u5500(void)
 {
 	return dbx500_partnumber() == 0x5500;
@@ -111,7 +121,12 @@ static inline bool cpu_is_u8500v21(void)
 
 static inline bool cpu_is_u8500v20_or_later(void)
 {
-	return cpu_is_u8500() && !cpu_is_u8500v10() && !cpu_is_u8500v11();
+	/*
+	 * U9540 has so much in common with U8500 that is is considered a
+	 * U8500 variant.
+	 */
+	return cpu_is_u9540() ||
+		(cpu_is_u8500() && !cpu_is_u8500v10() && !cpu_is_u8500v11());
 }
 
 static inline bool ux500_is_svp(void)

arch/arm/mach-ux500/include/mach/irqs.h

@@ -24,7 +24,7 @@
  */
 #define IRQ_MTU0		(IRQ_SHPI_START + 4)
 
-#define DBX500_NR_INTERNAL_IRQS		160
+#define DBX500_NR_INTERNAL_IRQS		166
 
 /* After chip-specific IRQ numbers we have the GPIO ones */
 #define NOMADIK_NR_GPIO			288

arch/arm/mach-ux500/platsmp.c

@@ -50,7 +50,7 @@ static void __iomem *scu_base_addr(void)
 {
 	if (cpu_is_u5500())
 		return __io_address(U5500_SCU_BASE);
-	else if (cpu_is_u8500())
+	else if (cpu_is_u8500_family())
 		return __io_address(U8500_SCU_BASE);
 	else
 		ux500_unknown_soc();
@@ -122,7 +122,7 @@ static void __init wakeup_secondary(void)
 
 	if (cpu_is_u5500())
 		backupram = __io_address(U5500_BACKUPRAM0_BASE);
-	else if (cpu_is_u8500())
+	else if (cpu_is_u8500_family())
 		backupram = __io_address(U8500_BACKUPRAM0_BASE);
 	else
 		ux500_unknown_soc();

arch/arm/mach-ux500/timer.c

@@ -51,7 +51,7 @@ static void __init ux500_timer_init(void)
 	if (cpu_is_u5500()) {
 		mtu_timer_base = __io_address(U5500_MTU0_BASE);
 		prcmu_timer_base = __io_address(U5500_PRCMU_TIMER_3_BASE);
-	} else if (cpu_is_u8500()) {
+	} else if (cpu_is_u8500_family()) {
 		mtu_timer_base = __io_address(U8500_MTU0_BASE);
 		prcmu_timer_base = __io_address(U8500_PRCMU_TIMER_4_BASE);
 	} else {

drivers/cpufreq/db8500-cpufreq.c

@@ -161,7 +161,7 @@ static struct cpufreq_driver db8500_cpufreq_driver = {
 
 static int __init db8500_cpufreq_register(void)
 {
-	if (!cpu_is_u8500v20_or_later())
+	if (!cpu_is_u8500_family())
 		return -ENODEV;
 
 	pr_info("cpufreq for DB8500 started\n");