OMAP: DSS2: DSI: Add error IRQ mask for DSI complexIO

The code presumed that all ComplexIO interrupts are errors. This is not
the case. This patch adds proper error mask for CIO interrupt handling.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>

drivers/video/omap2/dss/dsi.c

@@ -165,6 +165,14 @@ struct dsi_reg { u16 idx; };
 #define DSI_CIO_IRQ_ERRCONTENTIONLP1_3	(1 << 25)
 #define DSI_CIO_IRQ_ULPSACTIVENOT_ALL0	(1 << 30)
 #define DSI_CIO_IRQ_ULPSACTIVENOT_ALL1	(1 << 31)
+#define DSI_CIO_IRQ_ERROR_MASK \
+	(DSI_CIO_IRQ_ERRSYNCESC1 | DSI_CIO_IRQ_ERRSYNCESC2 | \
+	 DSI_CIO_IRQ_ERRSYNCESC3 | DSI_CIO_IRQ_ERRESC1 | DSI_CIO_IRQ_ERRESC2 | \
+	 DSI_CIO_IRQ_ERRESC3 | DSI_CIO_IRQ_ERRCONTROL1 | \
+	 DSI_CIO_IRQ_ERRCONTROL2 | DSI_CIO_IRQ_ERRCONTROL3 | \
+	 DSI_CIO_IRQ_ERRCONTENTIONLP0_1 | DSI_CIO_IRQ_ERRCONTENTIONLP1_1 | \
+	 DSI_CIO_IRQ_ERRCONTENTIONLP0_2 | DSI_CIO_IRQ_ERRCONTENTIONLP1_2 | \
+	 DSI_CIO_IRQ_ERRCONTENTIONLP0_3 | DSI_CIO_IRQ_ERRCONTENTIONLP1_3)
 
 #define DSI_DT_DCS_SHORT_WRITE_0	0x05
 #define DSI_DT_DCS_SHORT_WRITE_1	0x15
@@ -542,8 +550,12 @@ void dsi_irq_handler(void)
 		/* flush posted write */
 		dsi_read_reg(DSI_COMPLEXIO_IRQ_STATUS);
 
-		DSSERR("DSI CIO error, cio irqstatus %x\n", ciostatus);
-		print_irq_status_cio(ciostatus);
+		if (ciostatus & DSI_CIO_IRQ_ERROR_MASK) {
+			DSSERR("DSI CIO error, cio irqstatus %x\n", ciostatus);
+			print_irq_status_cio(ciostatus);
+		} else if (debug_irq) {
+			print_irq_status_cio(ciostatus);
+		}
 	}
 
 	dsi_write_reg(DSI_IRQSTATUS, irqstatus & ~DSI_IRQ_CHANNEL_MASK);
@@ -590,11 +602,8 @@ static void _dsi_initialize_irq(void)
 	for (i = 0; i < 4; ++i)
 		dsi_write_reg(DSI_VC_IRQENABLE(i), l);
 
-	/* XXX zonda responds incorrectly, causing control error:
-	   Exit from LP-ESC mode to LP11 uses wrong transition states on the
-	   data lines LP0 and LN0. */
-	dsi_write_reg(DSI_COMPLEXIO_IRQ_ENABLE,
-			-1 & (~DSI_CIO_IRQ_ERRCONTROL2));
+	l = DSI_CIO_IRQ_ERROR_MASK;
+	dsi_write_reg(DSI_COMPLEXIO_IRQ_ENABLE, l);
 }
 
 static u32 dsi_get_errors(void)