Merge commit 'v2.6.32-rc5' into perf/probes

Conflicts:
	kernel/trace/trace_event_profile.c

Merge reason: update to -rc5 and resolve conflict.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

Documentation/ABI/testing/sysfs-bus-pci-devices-cciss

@@ -31,3 +31,31 @@ Date:		March 2009
 Kernel Version: 2.6.30
 Contact:	iss_storagedev@hp.com
 Description:	A symbolic link to /sys/block/cciss!cXdY
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/rescan
+Date:		August 2009
+Kernel Version:	2.6.31
+Contact:	iss_storagedev@hp.com
+Description:	Kicks of a rescan of the controller to discover logical
+		drive topology changes.
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/lunid
+Date:		August 2009
+Kernel Version: 2.6.31
+Contact:	iss_storagedev@hp.com
+Description:	Displays the 8-byte LUN ID used to address logical
+		drive Y of controller X.
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/raid_level
+Date:		August 2009
+Kernel Version: 2.6.31
+Contact:	iss_storagedev@hp.com
+Description:	Displays the RAID level of logical drive Y of
+		controller X.
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/usage_count
+Date:		August 2009
+Kernel Version: 2.6.31
+Contact:	iss_storagedev@hp.com
+Description:	Displays the usage count (number of opens) of logical drive Y
+		of controller X.

Documentation/ABI/testing/sysfs-class-usb_host → Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc

@@ -1,4 +1,4 @@
-What:           /sys/class/usb_host/usb_hostN/wusb_chid
+What:           /sys/class/uwb_rc/uwbN/wusbhc/wusb_chid
 Date:           July 2008
 KernelVersion:  2.6.27
 Contact:        David Vrabel <david.vrabel@csr.com>
@@ -9,7 +9,7 @@ Description:
 
                 Set an all zero CHID to stop the host controller.
 
-What:           /sys/class/usb_host/usb_hostN/wusb_trust_timeout
+What:           /sys/class/uwb_rc/uwbN/wusbhc/wusb_trust_timeout
 Date:           July 2008
 KernelVersion:  2.6.27
 Contact:        David Vrabel <david.vrabel@csr.com>

Documentation/SubmittingPatches

@@ -232,7 +232,7 @@ your e-mail client so that it sends your patches untouched.
 When sending patches to Linus, always follow step #7.
 
 Large changes are not appropriate for mailing lists, and some
-maintainers.  If your patch, uncompressed, exceeds 40 kB in size,
+maintainers.  If your patch, uncompressed, exceeds 300 kB in size,
 it is preferred that you store your patch on an Internet-accessible
 server, and provide instead a URL (link) pointing to your patch.
 

Documentation/arm/tcm.txt

@@ -0,0 +1,147 @@
+ARM TCM (Tightly-Coupled Memory) handling in Linux
+----
+Written by Linus Walleij <linus.walleij@stericsson.com>
+
+Some ARM SoC:s have a so-called TCM (Tightly-Coupled Memory).
+This is usually just a few (4-64) KiB of RAM inside the ARM
+processor.
+
+Due to being embedded inside the CPU The TCM has a
+Harvard-architecture, so there is an ITCM (instruction TCM)
+and a DTCM (data TCM). The DTCM can not contain any
+instructions, but the ITCM can actually contain data.
+The size of DTCM or ITCM is minimum 4KiB so the typical
+minimum configuration is 4KiB ITCM and 4KiB DTCM.
+
+ARM CPU:s have special registers to read out status, physical
+location and size of TCM memories. arch/arm/include/asm/cputype.h
+defines a CPUID_TCM register that you can read out from the
+system control coprocessor. Documentation from ARM can be found
+at http://infocenter.arm.com, search for "TCM Status Register"
+to see documents for all CPUs. Reading this register you can
+determine if ITCM (bit 0) and/or DTCM (bit 16) is present in the
+machine.
+
+There is further a TCM region register (search for "TCM Region
+Registers" at the ARM site) that can report and modify the location
+size of TCM memories at runtime. This is used to read out and modify
+TCM location and size. Notice that this is not a MMU table: you
+actually move the physical location of the TCM around. At the
+place you put it, it will mask any underlying RAM from the
+CPU so it is usually wise not to overlap any physical RAM with
+the TCM.
+
+The TCM memory can then be remapped to another address again using
+the MMU, but notice that the TCM if often used in situations where
+the MMU is turned off. To avoid confusion the current Linux
+implementation will map the TCM 1 to 1 from physical to virtual
+memory in the location specified by the machine.
+
+TCM is used for a few things:
+
+- FIQ and other interrupt handlers that need deterministic
+  timing and cannot wait for cache misses.
+
+- Idle loops where all external RAM is set to self-refresh
+  retention mode, so only on-chip RAM is accessible by
+  the CPU and then we hang inside ITCM waiting for an
+  interrupt.
+
+- Other operations which implies shutting off or reconfiguring
+  the external RAM controller.
+
+There is an interface for using TCM on the ARM architecture
+in <asm/tcm.h>. Using this interface it is possible to:
+
+- Define the physical address and size of ITCM and DTCM.
+
+- Tag functions to be compiled into ITCM.
+
+- Tag data and constants to be allocated to DTCM and ITCM.
+
+- Have the remaining TCM RAM added to a special
+  allocation pool with gen_pool_create() and gen_pool_add()
+  and provice tcm_alloc() and tcm_free() for this
+  memory. Such a heap is great for things like saving
+  device state when shutting off device power domains.
+
+A machine that has TCM memory shall select HAVE_TCM in
+arch/arm/Kconfig for itself, and then the
+rest of the functionality will depend on the physical
+location and size of ITCM and DTCM to be defined in
+mach/memory.h for the machine. Code that needs to use
+TCM shall #include <asm/tcm.h> If the TCM is not located
+at the place given in memory.h it will be moved using
+the TCM Region registers.
+
+Functions to go into itcm can be tagged like this:
+int __tcmfunc foo(int bar);
+
+Variables to go into dtcm can be tagged like this:
+int __tcmdata foo;
+
+Constants can be tagged like this:
+int __tcmconst foo;
+
+To put assembler into TCM just use
+.section ".tcm.text" or .section ".tcm.data"
+respectively.
+
+Example code:
+
+#include <asm/tcm.h>
+
+/* Uninitialized data */
+static u32 __tcmdata tcmvar;
+/* Initialized data */
+static u32 __tcmdata tcmassigned = 0x2BADBABEU;
+/* Constant */
+static const u32 __tcmconst tcmconst = 0xCAFEBABEU;
+
+static void __tcmlocalfunc tcm_to_tcm(void)
+{
+	int i;
+	for (i = 0; i < 100; i++)
+		tcmvar ++;
+}
+
+static void __tcmfunc hello_tcm(void)
+{
+	/* Some abstract code that runs in ITCM */
+	int i;
+	for (i = 0; i < 100; i++) {
+		tcmvar ++;
+	}
+	tcm_to_tcm();
+}
+
+static void __init test_tcm(void)
+{
+	u32 *tcmem;
+	int i;
+
+	hello_tcm();
+	printk("Hello TCM executed from ITCM RAM\n");
+
+	printk("TCM variable from testrun: %u @ %p\n", tcmvar, &tcmvar);
+	tcmvar = 0xDEADBEEFU;
+	printk("TCM variable: 0x%x @ %p\n", tcmvar, &tcmvar);
+
+	printk("TCM assigned variable: 0x%x @ %p\n", tcmassigned, &tcmassigned);
+
+	printk("TCM constant: 0x%x @ %p\n", tcmconst, &tcmconst);
+
+	/* Allocate some TCM memory from the pool */
+	tcmem = tcm_alloc(20);
+	if (tcmem) {
+		printk("TCM Allocated 20 bytes of TCM @ %p\n", tcmem);
+		tcmem[0] = 0xDEADBEEFU;
+		tcmem[1] = 0x2BADBABEU;
+		tcmem[2] = 0xCAFEBABEU;
+		tcmem[3] = 0xDEADBEEFU;
+		tcmem[4] = 0x2BADBABEU;
+		for (i = 0; i < 5; i++)
+			printk("TCM tcmem[%d] = %08x\n", i, tcmem[i]);
+		tcm_free(tcmem, 20);
+	}
+}

Documentation/auxdisplay/cfag12864b-example.c

@@ -194,7 +194,6 @@ static void cfag12864b_blit(void)
  */
 
 #include <stdio.h>
-#include <string.h>
 
 #define EXAMPLES	6
 

Documentation/cgroups/cgroups.txt

@@ -227,7 +227,14 @@ as the path relative to the root of the cgroup file system.
 Each cgroup is represented by a directory in the cgroup file system
 containing the following files describing that cgroup:
 
- - tasks: list of tasks (by pid) attached to that cgroup
+ - tasks: list of tasks (by pid) attached to that cgroup.  This list
+   is not guaranteed to be sorted.  Writing a thread id into this file
+   moves the thread into this cgroup.
+ - cgroup.procs: list of tgids in the cgroup.  This list is not
+   guaranteed to be sorted or free of duplicate tgids, and userspace
+   should sort/uniquify the list if this property is required.
+   Writing a tgid into this file moves all threads with that tgid into
+   this cgroup.
  - notify_on_release flag: run the release agent on exit?
  - release_agent: the path to use for release notifications (this file
    exists in the top cgroup only)
@@ -374,7 +381,7 @@ Now you want to do something with this cgroup.
 
 In this directory you can find several files:
 # ls
-notify_on_release tasks
+cgroup.procs notify_on_release tasks
 (plus whatever files added by the attached subsystems)
 
 Now attach your shell to this cgroup:
@@ -408,6 +415,26 @@ You can attach the current shell task by echoing 0:
 
 # echo 0 > tasks
 
+2.3 Mounting hierarchies by name
+--------------------------------
+
+Passing the name=<x> option when mounting a cgroups hierarchy
+associates the given name with the hierarchy.  This can be used when
+mounting a pre-existing hierarchy, in order to refer to it by name
+rather than by its set of active subsystems.  Each hierarchy is either
+nameless, or has a unique name.
+
+The name should match [\w.-]+
+
+When passing a name=<x> option for a new hierarchy, you need to
+specify subsystems manually; the legacy behaviour of mounting all
+subsystems when none are explicitly specified is not supported when
+you give a subsystem a name.
+
+The name of the subsystem appears as part of the hierarchy description
+in /proc/mounts and /proc/<pid>/cgroups.
+
+
 3. Kernel API
 =============
 
@@ -501,7 +528,7 @@ rmdir() will fail with it. From this behavior, pre_destroy() can be
 called multiple times against a cgroup.
 
 int can_attach(struct cgroup_subsys *ss, struct cgroup *cgrp,
-	       struct task_struct *task)
+	       struct task_struct *task, bool threadgroup)
 (cgroup_mutex held by caller)
 
 Called prior to moving a task into a cgroup; if the subsystem
@@ -509,14 +536,20 @@ returns an error, this will abort the attach operation.  If a NULL
 task is passed, then a successful result indicates that *any*
 unspecified task can be moved into the cgroup. Note that this isn't
 called on a fork. If this method returns 0 (success) then this should
-remain valid while the caller holds cgroup_mutex.
+remain valid while the caller holds cgroup_mutex. If threadgroup is
+true, then a successful result indicates that all threads in the given
+thread's threadgroup can be moved together.
 
 void attach(struct cgroup_subsys *ss, struct cgroup *cgrp,
-	    struct cgroup *old_cgrp, struct task_struct *task)
+	    struct cgroup *old_cgrp, struct task_struct *task,
+	    bool threadgroup)
 (cgroup_mutex held by caller)
 
 Called after the task has been attached to the cgroup, to allow any
 post-attachment activity that requires memory allocations or blocking.
+If threadgroup is true, the subsystem should take care of all threads
+in the specified thread's threadgroup. Currently does not support any
+subsystem that might need the old_cgrp for every thread in the group.
 
 void fork(struct cgroup_subsy *ss, struct task_struct *task)
 

Documentation/cgroups/memory.txt

@@ -179,6 +179,9 @@ The reclaim algorithm has not been modified for cgroups, except that
 pages that are selected for reclaiming come from the per cgroup LRU
 list.
 
+NOTE: Reclaim does not work for the root cgroup, since we cannot set any
+limits on the root cgroup.
+
 2. Locking
 
 The memory controller uses the following hierarchy
@@ -210,6 +213,7 @@ We can alter the memory limit:
 NOTE: We can use a suffix (k, K, m, M, g or G) to indicate values in kilo,
 mega or gigabytes.
 NOTE: We can write "-1" to reset the *.limit_in_bytes(unlimited).
+NOTE: We cannot set limits on the root cgroup any more.
 
 # cat /cgroups/0/memory.limit_in_bytes
 4194304
@@ -375,7 +379,42 @@ cgroups created below it.
 
 NOTE2: This feature can be enabled/disabled per subtree.
 
-7. TODO
+7. Soft limits
+
+Soft limits allow for greater sharing of memory. The idea behind soft limits
+is to allow control groups to use as much of the memory as needed, provided
+
+a. There is no memory contention
+b. They do not exceed their hard limit
+
+When the system detects memory contention or low memory control groups
+are pushed back to their soft limits. If the soft limit of each control
+group is very high, they are pushed back as much as possible to make
+sure that one control group does not starve the others of memory.
+
+Please note that soft limits is a best effort feature, it comes with
+no guarantees, but it does its best to make sure that when memory is
+heavily contended for, memory is allocated based on the soft limit
+hints/setup. Currently soft limit based reclaim is setup such that
+it gets invoked from balance_pgdat (kswapd).
+
+7.1 Interface
+
+Soft limits can be setup by using the following commands (in this example we
+assume a soft limit of 256 megabytes)
+
+# echo 256M > memory.soft_limit_in_bytes
+
+If we want to change this to 1G, we can at any time use
+
+# echo 1G > memory.soft_limit_in_bytes
+
+NOTE1: Soft limits take effect over a long period of time, since they involve
+       reclaiming memory for balancing between memory cgroups
+NOTE2: It is recommended to set the soft limit always below the hard limit,
+       otherwise the hard limit will take precedence.
+
+8. TODO
 
 1. Add support for accounting huge pages (as a separate controller)
 2. Make per-cgroup scanner reclaim not-shared pages first

Documentation/connector/cn_test.c

@@ -34,7 +34,7 @@ static char cn_test_name[] = "cn_test";
 static struct sock *nls;
 static struct timer_list cn_test_timer;
 
-static void cn_test_callback(struct cn_msg *msg)
+static void cn_test_callback(struct cn_msg *msg, struct netlink_skb_parms *nsp)
 {
 	pr_info("%s: %lu: idx=%x, val=%x, seq=%u, ack=%u, len=%d: %s.\n",
 	        __func__, jiffies, msg->id.idx, msg->id.val,

Documentation/connector/connector.txt

@@ -23,7 +23,7 @@ handling, etc...  The Connector driver allows any kernelspace agents to use
 netlink based networking for inter-process communication in a significantly
 easier way:
 
-int cn_add_callback(struct cb_id *id, char *name, void (*callback) (void *));
+int cn_add_callback(struct cb_id *id, char *name, void (*callback) (struct cn_msg *, struct netlink_skb_parms *));
 void cn_netlink_send(struct cn_msg *msg, u32 __group, int gfp_mask);
 
 struct cb_id
@@ -53,15 +53,15 @@ struct cn_msg
 Connector interfaces.
 /*****************************************/
 
-int cn_add_callback(struct cb_id *id, char *name, void (*callback) (void *));
+int cn_add_callback(struct cb_id *id, char *name, void (*callback) (struct cn_msg *, struct netlink_skb_parms *));
 
  Registers new callback with connector core.
 
  struct cb_id *id		- unique connector's user identifier.
 				  It must be registered in connector.h for legal in-kernel users.
  char *name			- connector's callback symbolic name.
- void (*callback) (void *)	- connector's callback.
-				  Argument must be dereferenced to struct cn_msg *.
+ void (*callback) (struct cn..)	- connector's callback.
+				  cn_msg and the sender's credentials
 
 
 void cn_del_callback(struct cb_id *id);

Documentation/crypto/async-tx-api.txt

@@ -54,20 +54,23 @@ features surfaced as a result:
 
 3.1 General format of the API:
 struct dma_async_tx_descriptor *
-async_<operation>(<op specific parameters>,
-		  enum async_tx_flags flags,
-        	  struct dma_async_tx_descriptor *dependency,
-        	  dma_async_tx_callback callback_routine,
-		  void *callback_parameter);
+async_<operation>(<op specific parameters>, struct async_submit ctl *submit)
 
 3.2 Supported operations:
-memcpy       - memory copy between a source and a destination buffer
-memset       - fill a destination buffer with a byte value
-xor          - xor a series of source buffers and write the result to a
-	       destination buffer
-xor_zero_sum - xor a series of source buffers and set a flag if the
-	       result is zero.  The implementation attempts to prevent
-	       writes to memory
+memcpy  - memory copy between a source and a destination buffer
+memset  - fill a destination buffer with a byte value
+xor     - xor a series of source buffers and write the result to a
+	  destination buffer
+xor_val - xor a series of source buffers and set a flag if the
+	  result is zero.  The implementation attempts to prevent
+	  writes to memory
+pq	- generate the p+q (raid6 syndrome) from a series of source buffers
+pq_val  - validate that a p and or q buffer are in sync with a given series of
+	  sources
+datap	- (raid6_datap_recov) recover a raid6 data block and the p block
+	  from the given sources
+2data	- (raid6_2data_recov) recover 2 raid6 data blocks from the given
+	  sources
 
 3.3 Descriptor management:
 The return value is non-NULL and points to a 'descriptor' when the operation
@@ -80,8 +83,8 @@ acknowledged by the application before the offload engine driver is allowed to
 recycle (or free) the descriptor.  A descriptor can be acked by one of the
 following methods:
 1/ setting the ASYNC_TX_ACK flag if no child operations are to be submitted
-2/ setting the ASYNC_TX_DEP_ACK flag to acknowledge the parent
-   descriptor of a new operation.
+2/ submitting an unacknowledged descriptor as a dependency to another
+   async_tx call will implicitly set the acknowledged state.
 3/ calling async_tx_ack() on the descriptor.
 
 3.4 When does the operation execute?
@@ -119,30 +122,42 @@ of an operation.
 Perform a xor->copy->xor operation where each operation depends on the
 result from the previous operation:
 
-void complete_xor_copy_xor(void *param)
+void callback(void *param)
 {
-	printk("complete\n");
+	struct completion *cmp = param;
+
+	complete(cmp);
 }
 
-int run_xor_copy_xor(struct page **xor_srcs,
-		     int xor_src_cnt,
-		     struct page *xor_dest,
-		     size_t xor_len,
-		     struct page *copy_src,
-		     struct page *copy_dest,
-		     size_t copy_len)
+void run_xor_copy_xor(struct page **xor_srcs,
+		      int xor_src_cnt,
+		      struct page *xor_dest,
+		      size_t xor_len,
+		      struct page *copy_src,
+		      struct page *copy_dest,
+		      size_t copy_len)
 {
 	struct dma_async_tx_descriptor *tx;
+	addr_conv_t addr_conv[xor_src_cnt];
+	struct async_submit_ctl submit;
+	addr_conv_t addr_conv[NDISKS];
+	struct completion cmp;
+
+	init_async_submit(&submit, ASYNC_TX_XOR_DROP_DST, NULL, NULL, NULL,
+			  addr_conv);
+	tx = async_xor(xor_dest, xor_srcs, 0, xor_src_cnt, xor_len, &submit)
 
-	tx = async_xor(xor_dest, xor_srcs, 0, xor_src_cnt, xor_len,
-		       ASYNC_TX_XOR_DROP_DST, NULL, NULL, NULL);
-	tx = async_memcpy(copy_dest, copy_src, 0, 0, copy_len,
-			  ASYNC_TX_DEP_ACK, tx, NULL, NULL);
-	tx = async_xor(xor_dest, xor_srcs, 0, xor_src_cnt, xor_len,
-		       ASYNC_TX_XOR_DROP_DST | ASYNC_TX_DEP_ACK | ASYNC_TX_ACK,
-		       tx, complete_xor_copy_xor, NULL);
+	submit->depend_tx = tx;
+	tx = async_memcpy(copy_dest, copy_src, 0, 0, copy_len, &submit);
+
+	init_completion(&cmp);
+	init_async_submit(&submit, ASYNC_TX_XOR_DROP_DST | ASYNC_TX_ACK, tx,
+			  callback, &cmp, addr_conv);
+	tx = async_xor(xor_dest, xor_srcs, 0, xor_src_cnt, xor_len, &submit);
 
 	async_tx_issue_pending_all();
+
+	wait_for_completion(&cmp);
 }
 
 See include/linux/async_tx.h for more information on the flags.  See the

Documentation/debugging-via-ohci1394.txt

@@ -64,14 +64,14 @@ be used to view the printk buffer of a remote machine, even with live update.
 
 Bernhard Kaindl enhanced firescope to support accessing 64-bit machines
 from 32-bit firescope and vice versa:
-- ftp://ftp.suse.de/private/bk/firewire/tools/firescope-0.2.2.tar.bz2
+- http://halobates.de/firewire/firescope-0.2.2.tar.bz2
 
 and he implemented fast system dump (alpha version - read README.txt):
-- ftp://ftp.suse.de/private/bk/firewire/tools/firedump-0.1.tar.bz2
+- http://halobates.de/firewire/firedump-0.1.tar.bz2
 
 There is also a gdb proxy for firewire which allows to use gdb to access
 data which can be referenced from symbols found by gdb in vmlinux:
-- ftp://ftp.suse.de/private/bk/firewire/tools/fireproxy-0.33.tar.bz2
+- http://halobates.de/firewire/fireproxy-0.33.tar.bz2
 
 The latest version of this gdb proxy (fireproxy-0.34) can communicate (not
 yet stable) with kgdb over an memory-based communication module (kgdbom).
@@ -178,7 +178,7 @@ Step-by-step instructions for using firescope with early OHCI initialization:
 
 Notes
 -----
-Documentation and specifications: ftp://ftp.suse.de/private/bk/firewire/docs
+Documentation and specifications: http://halobates.de/firewire/
 
 FireWire is a trademark of Apple Inc. - for more information please refer to:
 http://en.wikipedia.org/wiki/FireWire

Documentation/feature-removal-schedule.txt

@@ -354,14 +354,6 @@ Who:  Krzysztof Piotr Oledzki <ole@ans.pl>
 
 ---------------------------
 
-What:	fscher and fscpos drivers
-When:	June 2009
-Why:	Deprecated by the new fschmd driver.
-Who:	Hans de Goede <hdegoede@redhat.com>
-	Jean Delvare <khali@linux-fr.org>
-
----------------------------
-
 What:	sysfs ui for changing p4-clockmod parameters
 When:	September 2009
 Why:	See commits 129f8ae9b1b5be94517da76009ea956e89104ce8 and
@@ -459,3 +451,33 @@ Why:	OSS sound_core grabs all legacy minors (0-255) of SOUND_MAJOR
 	will also allow making ALSA OSS emulation independent of
 	sound_core.  The dependency will be broken then too.
 Who:	Tejun Heo <tj@kernel.org>
+
+----------------------------
+
+What:	Support for VMware's guest paravirtuliazation technique [VMI] will be
+	dropped.
+When:	2.6.37 or earlier.
+Why:	With the recent innovations in CPU hardware acceleration technologies
+	from Intel and AMD, VMware ran a few experiments to compare these
+	techniques to guest paravirtualization technique on VMware's platform.
+	These hardware assisted virtualization techniques have outperformed the
+	performance benefits provided by VMI in most of the workloads. VMware
+	expects that these hardware features will be ubiquitous in a couple of
+	years, as a result, VMware has started a phased retirement of this
+	feature from the hypervisor. We will be removing this feature from the
+	Kernel too. Right now we are targeting 2.6.37 but can retire earlier if
+	technical reasons (read opportunity to remove major chunk of pvops)
+	arise.
+
+	Please note that VMI has always been an optimization and non-VMI kernels
+	still work fine on VMware's platform.
+	Latest versions of VMware's product which support VMI are,
+	Workstation 7.0 and VSphere 4.0 on ESX side, future maintainence
+	releases for these products will continue supporting VMI.
+
+	For more details about VMI retirement take a look at this,
+	http://blogs.vmware.com/guestosguide/2009/09/vmi-retirement.html
+
+Who:	Alok N Kataria <akataria@vmware.com>
+
+----------------------------

Documentation/filesystems/9p.txt

@@ -18,11 +18,11 @@ the 9p client is available in the form of a USENIX paper:
 
 Other applications are described in the following papers:
 	* XCPU & Clustering
-		http://www.xcpu.org/xcpu-talk.pdf
+		http://xcpu.org/papers/xcpu-talk.pdf
 	* KVMFS: control file system for KVM
-		http://www.xcpu.org/kvmfs.pdf
-	* CellFS: A New ProgrammingModel for the Cell BE
-		http://www.xcpu.org/cellfs-talk.pdf
+		http://xcpu.org/papers/kvmfs.pdf
+	* CellFS: A New Programming Model for the Cell BE
+		http://xcpu.org/papers/cellfs-talk.pdf
 	* PROSE I/O: Using 9p to enable Application Partitions
 		http://plan9.escet.urjc.es/iwp9/cready/PROSE_iwp9_2006.pdf
 
@@ -48,6 +48,7 @@ OPTIONS
                                 (see rfdno and wfdno)
 			virtio	- connect to the next virtio channel available
 				(from lguest or KVM with trans_virtio module)
+			rdma	- connect to a specified RDMA channel
 
   uname=name	user name to attempt mount as on the remote server.  The
   		server may override or ignore this value.  Certain user
@@ -59,16 +60,22 @@ OPTIONS
   cache=mode	specifies a caching policy.  By default, no caches are used.
 			loose = no attempts are made at consistency,
                                 intended for exclusive, read-only mounts
+			fscache = use FS-Cache for a persistent, read-only
+				cache backend.
 
   debug=n	specifies debug level.  The debug level is a bitmask.
-  			0x01 = display verbose error messages
-			0x02 = developer debug (DEBUG_CURRENT)
-			0x04 = display 9p trace
-			0x08 = display VFS trace
-			0x10 = display Marshalling debug
-			0x20 = display RPC debug
-			0x40 = display transport debug
-			0x80 = display allocation debug
+			0x01  = display verbose error messages
+			0x02  = developer debug (DEBUG_CURRENT)
+			0x04  = display 9p trace
+			0x08  = display VFS trace
+			0x10  = display Marshalling debug
+			0x20  = display RPC debug
+			0x40  = display transport debug
+			0x80  = display allocation debug
+			0x100 = display protocol message debug
+			0x200 = display Fid debug
+			0x400 = display packet debug
+			0x800 = display fscache tracing debug
 
   rfdno=n	the file descriptor for reading with trans=fd
 
@@ -100,6 +107,10 @@ OPTIONS
 			any   = v9fs does single attach and performs all
 				operations as one user
 
+  cachetag	cache tag to use the specified persistent cache.
+		cache tags for existing cache sessions can be listed at
+		/sys/fs/9p/caches. (applies only to cache=fscache)
+
 RESOURCES
 =========
 
@@ -118,7 +129,7 @@ and export.
 A Linux version of the 9p server is now maintained under the npfs project
 on sourceforge (http://sourceforge.net/projects/npfs).  The currently
 maintained version is the single-threaded version of the server (named spfs)
-available from the same CVS repository.
+available from the same SVN repository.
 
 There are user and developer mailing lists available through the v9fs project
 on sourceforge (http://sourceforge.net/projects/v9fs).
@@ -126,7 +137,8 @@ on sourceforge (http://sourceforge.net/projects/v9fs).
 A stand-alone version of the module (which should build for any 2.6 kernel)
 is available via (http://github.com/ericvh/9p-sac/tree/master)
 
-News and other information is maintained on SWiK (http://swik.net/v9fs).
+News and other information is maintained on SWiK (http://swik.net/v9fs)
+and the Wiki (http://sf.net/apps/mediawiki/v9fs/index.php).
 
 Bug reports may be issued through the kernel.org bugzilla 
 (http://bugzilla.kernel.org)

Documentation/filesystems/ext3.txt

@@ -123,10 +123,18 @@ resuid=n		The user ID which may use the reserved blocks.
 
 sb=n			Use alternate superblock at this location.
 
-quota
-noquota
-grpquota
-usrquota
+quota			These options are ignored by the filesystem. They
+noquota			are used only by quota tools to recognize volumes
+grpquota		where quota should be turned on. See documentation
+usrquota		in the quota-tools package for more details
+			(http://sourceforge.net/projects/linuxquota).
+
+jqfmt=<quota type>	These options tell filesystem details about quota
+usrjquota=<file>	so that quota information can be properly updated
+grpjquota=<file>	during journal replay. They replace the above
+			quota options. See documentation in the quota-tools
+			package for more details
+			(http://sourceforge.net/projects/linuxquota).
 
 bh		(*)	ext3 associates buffer heads to data pages to
 nobh			(a) cache disk block mapping information

Documentation/filesystems/ext4.txt

@@ -282,9 +282,16 @@ stripe=n		Number of filesystem blocks that mballoc will try
 			to use for allocation size and alignment. For RAID5/6
 			systems this should be the number of data
 			disks *  RAID chunk size in file system blocks.
-delalloc	(*)	Deferring block allocation until write-out time.
-nodelalloc		Disable delayed allocation. Blocks are allocation
-			when data is copied from user to page cache.
+
+delalloc	(*)	Defer block allocation until just before ext4
+			writes out the block(s) in question.  This
+			allows ext4 to better allocation decisions
+			more efficiently.
+nodelalloc		Disable delayed allocation.  Blocks are allocated
+			when the data is copied from userspace to the
+			page cache, either via the write(2) system call
+			or when an mmap'ed page which was previously
+			unallocated is written for the first time.
 
 max_batch_time=usec	Maximum amount of time ext4 should wait for
 			additional filesystem operations to be batch

Documentation/filesystems/proc.txt

@@ -1113,7 +1113,6 @@ Table 1-12: Files in /proc/fs/ext4/<devname>
 ..............................................................................
  File            Content                                        
  mb_groups       details of multiblock allocator buddy cache of free blocks
- mb_history      multiblock allocation history
 ..............................................................................
 
 

Documentation/filesystems/sharedsubtree.txt

@@ -4,7 +4,7 @@ Shared Subtrees
 Contents:
 	1) Overview
 	2) Features
-	3) smount command
+	3) Setting mount states
 	4) Use-case
 	5) Detailed semantics
 	6) Quiz
@@ -41,14 +41,14 @@ replicas continue to be exactly same.
 
 	Here is an example:
 
-	Lets say /mnt has a mount that is shared.
+	Let's say /mnt has a mount that is shared.
 	mount --make-shared /mnt
 
-	note: mount command does not yet support the --make-shared flag.
-	I have included a small C program which does the same by executing
-	'smount /mnt shared'
+	Note: mount(8) command now supports the --make-shared flag,
+	so the sample 'smount' program is no longer needed and has been
+	removed.
 
-	#mount --bind /mnt /tmp
+	# mount --bind /mnt /tmp
 	The above command replicates the mount at /mnt to the mountpoint /tmp
 	and the contents of both the mounts remain identical.
 
@@ -58,8 +58,8 @@ replicas continue to be exactly same.
 	#ls /tmp
 	a b c
 
-	Now lets say we mount a device at /tmp/a
-	#mount /dev/sd0  /tmp/a
+	Now let's say we mount a device at /tmp/a
+	# mount /dev/sd0  /tmp/a
 
 	#ls /tmp/a
 	t1 t2 t2
@@ -80,21 +80,20 @@ replicas continue to be exactly same.
 
 	Here is an example:
 
-	Lets say /mnt has a mount which is shared.
-	#mount --make-shared /mnt
+	Let's say /mnt has a mount which is shared.
+	# mount --make-shared /mnt
 
-	Lets bind mount /mnt to /tmp
-	#mount --bind /mnt /tmp
+	Let's bind mount /mnt to /tmp
+	# mount --bind /mnt /tmp
 
 	the new mount at /tmp becomes a shared mount and it is a replica of
 	the mount at /mnt.
 
-	Now lets make the mount at /tmp; a slave of /mnt
-	#mount --make-slave /tmp
-	[or smount /tmp slave]
+	Now let's make the mount at /tmp; a slave of /mnt
+	# mount --make-slave /tmp
 
-	lets mount /dev/sd0 on /mnt/a
-	#mount /dev/sd0 /mnt/a
+	let's mount /dev/sd0 on /mnt/a
+	# mount /dev/sd0 /mnt/a
 
 	#ls /mnt/a
 	t1 t2 t3
@@ -104,9 +103,9 @@ replicas continue to be exactly same.
 
 	Note the mount event has propagated to the mount at /tmp
 
-	However lets see what happens if we mount something on the mount at /tmp
+	However let's see what happens if we mount something on the mount at /tmp
 
-	#mount /dev/sd1 /tmp/b
+	# mount /dev/sd1 /tmp/b
 
 	#ls /tmp/b
 	s1 s2 s3
@@ -124,12 +123,11 @@ replicas continue to be exactly same.
 
 2d) A unbindable mount is a unbindable private mount
 
-	lets say we have a mount at /mnt and we make is unbindable
+	let's say we have a mount at /mnt and we make is unbindable
 
-	#mount --make-unbindable /mnt
-	 [ smount /mnt  unbindable ]
+	# mount --make-unbindable /mnt
 
-	 Lets try to bind mount this mount somewhere else.
+	 Let's try to bind mount this mount somewhere else.
 	 # mount --bind /mnt /tmp
 	 mount: wrong fs type, bad option, bad superblock on /mnt,
 	        or too many mounted file systems
@@ -137,149 +135,15 @@ replicas continue to be exactly same.
 	Binding a unbindable mount is a invalid operation.
 
 
-3) smount command
+3) Setting mount states
 
-	Currently the mount command is not aware of shared subtree features.
-	Work is in progress to add the support in mount ( util-linux package ).
-	Till then use the following program.
+	The mount command (util-linux package) can be used to set mount
+	states:
 
-	------------------------------------------------------------------------
-	//
-	//this code was developed my Miklos Szeredi <miklos@szeredi.hu>
-	//and modified by Ram Pai <linuxram@us.ibm.com>
-	// sample usage:
-	//              smount /tmp shared
-	//
-	#include <stdio.h>
-	#include <stdlib.h>
-	#include <unistd.h>
-	#include <string.h>
-	#include <sys/mount.h>
-	#include <sys/fsuid.h>
-
-	#ifndef MS_REC
-	#define MS_REC		0x4000	/* 16384: Recursive loopback */
-	#endif
-
-	#ifndef MS_SHARED
-	#define MS_SHARED		1<<20	/* Shared */
-	#endif
-
-	#ifndef MS_PRIVATE
-	#define MS_PRIVATE		1<<18	/* Private */
-	#endif
-
-	#ifndef MS_SLAVE
-	#define MS_SLAVE		1<<19	/* Slave */
-	#endif
-
-	#ifndef MS_UNBINDABLE
-	#define MS_UNBINDABLE		1<<17	/* Unbindable */
-	#endif
-
-	int main(int argc, char *argv[])
-	{
-		int type;
-		if(argc != 3) {
-			fprintf(stderr, "usage: %s dir "
-			"<rshared|rslave|rprivate|runbindable|shared|slave"
-			"|private|unbindable>\n" , argv[0]);
-			return 1;
-		}
-
-		fprintf(stdout, "%s %s %s\n", argv[0], argv[1], argv[2]);
-
-		if (strcmp(argv[2],"rshared")==0)
-			type=(MS_SHARED|MS_REC);
-		else if (strcmp(argv[2],"rslave")==0)
-			type=(MS_SLAVE|MS_REC);
-		else if (strcmp(argv[2],"rprivate")==0)
-			type=(MS_PRIVATE|MS_REC);
-		else if (strcmp(argv[2],"runbindable")==0)
-			type=(MS_UNBINDABLE|MS_REC);
-		else if (strcmp(argv[2],"shared")==0)
-			type=MS_SHARED;
-		else if (strcmp(argv[2],"slave")==0)
-			type=MS_SLAVE;
-		else if (strcmp(argv[2],"private")==0)
-			type=MS_PRIVATE;
-		else if (strcmp(argv[2],"unbindable")==0)
-			type=MS_UNBINDABLE;
-		else {
-			fprintf(stderr, "invalid operation: %s\n", argv[2]);
-			return 1;
-		}
-		setfsuid(getuid());
-
-		if(mount("", argv[1], "dontcare", type, "") == -1) {
-			perror("mount");
-			return 1;
-		}
-		return 0;
-	}
-	-----------------------------------------------------------------------
-
-	Copy the above code snippet into smount.c
-	gcc -o smount smount.c
-
-
-	(i) To mark all the mounts under /mnt as shared execute the following
-	command:
-
-	 	smount /mnt rshared
-		the corresponding syntax planned for mount command is
-		mount --make-rshared /mnt
-
-	    just to mark a mount /mnt as shared, execute the following
-	    command:
-	 	smount /mnt shared
-		the corresponding syntax planned for mount command is
-		mount --make-shared /mnt
-
-	(ii) To mark all the shared mounts under /mnt as slave execute the
-	following
-
-	     command:
-		smount /mnt rslave
-		the corresponding syntax planned for mount command is
-		mount --make-rslave /mnt
-
-	    just to mark a mount /mnt as slave, execute the following
-	    command:
-	 	smount /mnt slave
-		the corresponding syntax planned for mount command is
-		mount --make-slave /mnt
-
-	(iii) To mark all the mounts under /mnt as private execute the
-	following command:
-
-		smount /mnt rprivate
-		the corresponding syntax planned for mount command is
-		mount --make-rprivate /mnt
-
-	    just to mark a mount /mnt as private, execute the following
-	    command:
-	 	smount /mnt private
-		the corresponding syntax planned for mount command is
-		mount --make-private /mnt
-
-	      NOTE: by default all the mounts are created as private. But if
-	      you want to change some shared/slave/unbindable  mount as
-	      private at a later point in time, this command can help.
-
-	(iv) To mark all the mounts under /mnt as unbindable execute the
-	following
-
-	     command:
-		smount /mnt runbindable
-		the corresponding syntax planned for mount command is
-		mount --make-runbindable /mnt
-
-	    just to mark a mount /mnt as unbindable, execute the following
-	    command:
-	 	smount /mnt unbindable
-		the corresponding syntax planned for mount command is
-		mount --make-unbindable /mnt
+	mount --make-shared mountpoint
+	mount --make-slave mountpoint
+	mount --make-private mountpoint
+	mount --make-unbindable mountpoint
 
 
 4) Use cases
@@ -350,7 +214,7 @@ replicas continue to be exactly same.
 		mount --rbind / /view/v3
 		mount --rbind / /view/v4
 
-		and if /usr has a versioning filesystem mounted, than that
+		and if /usr has a versioning filesystem mounted, then that
 		mount appears at /view/v1/usr, /view/v2/usr, /view/v3/usr and
 		/view/v4/usr too
 
@@ -390,7 +254,7 @@ replicas continue to be exactly same.
 
 		For example:
 			mount --make-shared /mnt
-			mount --bin /mnt /tmp
+			mount --bind /mnt /tmp
 
 		The mount at /mnt and that at /tmp are both shared and belong
 		to the same peer group. Anything mounted or unmounted under
@@ -558,7 +422,7 @@ replicas continue to be exactly same.
 	then the subtree under the unbindable mount is pruned in the new
 	location.
 
-	eg: lets say we have the following mount tree.
+	eg: let's say we have the following mount tree.
 
 		A
 	      /   \
@@ -566,7 +430,7 @@ replicas continue to be exactly same.
 	     / \ / \
 	     D E F G
 
-	     Lets say all the mount except the mount C in the tree are
+	     Let's say all the mount except the mount C in the tree are
 	     of a type other than unbindable.
 
 	     If this tree is rbound to say Z
@@ -683,13 +547,13 @@ replicas continue to be exactly same.
 	'b' on mounts that receive propagation from mount 'B' and does not have
 	sub-mounts within them are unmounted.
 
-	Example: Lets say 'B1', 'B2', 'B3' are shared mounts that propagate to
+	Example: Let's say 'B1', 'B2', 'B3' are shared mounts that propagate to
 	each other.
 
-	lets say 'A1', 'A2', 'A3' are first mounted at dentry 'b' on mount
+	let's say 'A1', 'A2', 'A3' are first mounted at dentry 'b' on mount
 	'B1', 'B2' and 'B3' respectively.
 
-	lets say 'C1', 'C2', 'C3' are next mounted at the same dentry 'b' on
+	let's say 'C1', 'C2', 'C3' are next mounted at the same dentry 'b' on
 	mount 'B1', 'B2' and 'B3' respectively.
 
 	if 'C1' is unmounted, all the mounts that are most-recently-mounted on
@@ -710,7 +574,7 @@ replicas continue to be exactly same.
 	A cloned namespace contains all the mounts as that of the parent
 	namespace.
 
-	Lets say 'A' and 'B' are the corresponding mounts in the parent and the
+	Let's say 'A' and 'B' are the corresponding mounts in the parent and the
 	child namespace.
 
 	If 'A' is shared, then 'B' is also shared and 'A' and 'B' propagate to
@@ -759,11 +623,11 @@ replicas continue to be exactly same.
 		mount --make-slave /mnt
 
 		At this point we have the first mount at /tmp and
-		its root dentry is 1. Lets call this mount 'A'
+		its root dentry is 1. Let's call this mount 'A'
 		And then we have a second mount at /tmp1 with root
-		dentry 2. Lets call this mount 'B'
+		dentry 2. Let's call this mount 'B'
 		Next we have a third mount at /mnt with root dentry
-		mnt. Lets call this mount 'C'
+		mnt. Let's call this mount 'C'
 
 		'B' is the slave of 'A' and 'C' is a slave of 'B'
 		A -> B -> C
@@ -794,7 +658,7 @@ replicas continue to be exactly same.
 
 	Q3 Why is unbindable mount needed?
 
-		Lets say we want to replicate the mount tree at multiple
+		Let's say we want to replicate the mount tree at multiple
 		locations within the same subtree.
 
 		if one rbind mounts a tree within the same subtree 'n' times
@@ -803,7 +667,7 @@ replicas continue to be exactly same.
 		mounts. Here is a example.
 
 		step 1:
-		   lets say the root tree has just two directories with
+		   let's say the root tree has just two directories with
 		   one vfsmount.
 				    root
 				   /    \
@@ -875,7 +739,7 @@ replicas continue to be exactly same.
 		Unclonable mounts come in handy here.
 
 		step 1:
-		   lets say the root tree has just two directories with
+		   let's say the root tree has just two directories with
 		   one vfsmount.
 				    root
 				   /    \

Documentation/filesystems/vfat.txt

@@ -102,7 +102,7 @@ shortname=lower|win95|winnt|mixed
 		 winnt: emulate the Windows NT rule for display/create.
 		 mixed: emulate the Windows NT rule for display,
 			emulate the Windows 95 rule for create.
-		 Default setting is `lower'.
+		 Default setting is `mixed'.
 
 tz=UTC        -- Interpret timestamps as UTC rather than local time.
                  This option disables the conversion of timestamps

Documentation/filesystems/vfs.txt

@@ -536,6 +536,7 @@ struct address_space_operations {
 	/* migrate the contents of a page to the specified target */
 	int (*migratepage) (struct page *, struct page *);
 	int (*launder_page) (struct page *);
+	int (*error_remove_page) (struct mapping *mapping, struct page *page);
 };
 
   writepage: called by the VM to write a dirty page to backing store.
@@ -694,6 +695,12 @@ struct address_space_operations {
   	prevent redirtying the page, it is kept locked during the whole
 	operation.
 
+  error_remove_page: normally set to generic_error_remove_page if truncation
+	is ok for this address space. Used for memory failure handling.
+	Setting this implies you deal with pages going away under you,
+	unless you have them locked or reference counts increased.
+
+
 The File Object
 ===============
 

Documentation/flexible-arrays.txt

@@ -1,5 +1,5 @@
 Using flexible arrays in the kernel
-Last updated for 2.6.31
+Last updated for 2.6.32
 Jonathan Corbet <corbet@lwn.net>
 
 Large contiguous memory allocations can be unreliable in the Linux kernel.
@@ -40,6 +40,13 @@ argument is passed directly to the internal memory allocation calls.  With
 the current code, using flags to ask for high memory is likely to lead to
 notably unpleasant side effects.
 
+It is also possible to define flexible arrays at compile time with:
+
+    DEFINE_FLEX_ARRAY(name, element_size, total);
+
+This macro will result in a definition of an array with the given name; the
+element size and total will be checked for validity at compile time.
+
 Storing data into a flexible array is accomplished with a call to:
 
     int flex_array_put(struct flex_array *array, unsigned int element_nr,
@@ -76,16 +83,30 @@ particular element has never been allocated.
 Note that it is possible to get back a valid pointer for an element which
 has never been stored in the array.  Memory for array elements is allocated
 one page at a time; a single allocation could provide memory for several
-adjacent elements.  The flexible array code does not know if a specific
-element has been written; it only knows if the associated memory is
-present.  So a flex_array_get() call on an element which was never stored
-in the array has the potential to return a pointer to random data.  If the
-caller does not have a separate way to know which elements were actually
-stored, it might be wise, at least, to add GFP_ZERO to the flags argument
-to ensure that all elements are zeroed.
-
-There is no way to remove a single element from the array.  It is possible,
-though, to remove all elements with a call to:
+adjacent elements.  Flexible array elements are normally initialized to the
+value FLEX_ARRAY_FREE (defined as 0x6c in <linux/poison.h>), so errors
+involving that number probably result from use of unstored array entries.
+Note that, if array elements are allocated with __GFP_ZERO, they will be
+initialized to zero and this poisoning will not happen.
+
+Individual elements in the array can be cleared with:
+
+    int flex_array_clear(struct flex_array *array, unsigned int element_nr);
+
+This function will set the given element to FLEX_ARRAY_FREE and return
+zero.  If storage for the indicated element is not allocated for the array,
+flex_array_clear() will return -EINVAL instead.  Note that clearing an
+element does not release the storage associated with it; to reduce the
+allocated size of an array, call:
+
+    int flex_array_shrink(struct flex_array *array);
+
+The return value will be the number of pages of memory actually freed.
+This function works by scanning the array for pages containing nothing but
+FLEX_ARRAY_FREE bytes, so (1) it can be expensive, and (2) it will not work
+if the array's pages are allocated with __GFP_ZERO.
+
+It is possible to remove all elements of an array with a call to:
 
     void flex_array_free_parts(struct flex_array *array);
 

Documentation/hwmon/coretemp

@@ -4,7 +4,9 @@ Kernel driver coretemp
 Supported chips:
   * All Intel Core family
     Prefix: 'coretemp'
-    CPUID: family 0x6, models 0xe, 0xf, 0x16, 0x17
+    CPUID: family 0x6, models 0xe (Pentium M DC), 0xf (Core 2 DC 65nm),
+                              0x16 (Core 2 SC 65nm), 0x17 (Penryn 45nm),
+                              0x1a (Nehalem), 0x1c (Atom), 0x1e (Lynnfield)
     Datasheet: Intel 64 and IA-32 Architectures Software Developer's Manual
                Volume 3A: System Programming Guide
                http://softwarecommunity.intel.com/Wiki/Mobility/720.htm

Documentation/hwmon/fscher

@@ -1,169 +0,0 @@
-Kernel driver fscher
-====================
-
-Supported chips:
-  * Fujitsu-Siemens Hermes chip
-    Prefix: 'fscher'
-    Addresses scanned: I2C 0x73
-
-Authors:
-        Reinhard Nissl <rnissl@gmx.de> based on work
-        from Hermann Jung <hej@odn.de>,
-        Frodo Looijaard <frodol@dds.nl>,
-        Philip Edelbrock <phil@netroedge.com>
-
-Description
------------
-
-This driver implements support for the Fujitsu-Siemens Hermes chip. It is
-described in the 'Register Set Specification BMC Hermes based Systemboard'
-from Fujitsu-Siemens.
-
-The Hermes chip implements a hardware-based system management, e.g. for
-controlling fan speed and core voltage. There is also a watchdog counter on
-the chip which can trigger an alarm and even shut the system down.
-
-The chip provides three temperature values (CPU, motherboard and
-auxiliary), three voltage values (+12V, +5V and battery) and three fans
-(power supply, CPU and auxiliary).
-
-Temperatures are measured in degrees Celsius. The resolution is 1 degree.
-
-Fan rotation speeds are reported in RPM (rotations per minute). The value
-can be divided by a programmable divider (1, 2 or 4) which is stored on
-the chip.
-
-Voltage sensors (also known as "in" sensors) report their values in volts.
-
-All values are reported as final values from the driver. There is no need
-for further calculations.
-
-
-Detailed description
---------------------
-
-Below you'll find a single line description of all the bit values. With
-this information, you're able to decode e. g. alarms, wdog, etc. To make
-use of the watchdog, you'll need to set the watchdog time and enable the
-watchdog. After that it is necessary to restart the watchdog time within
-the specified period of time, or a system reset will occur.
-
-* revision
-  READING & 0xff = 0x??: HERMES revision identification
-
-* alarms
-  READING & 0x80 = 0x80: CPU throttling active
-  READING & 0x80 = 0x00: CPU running at full speed
-
-  READING & 0x10 = 0x10: software event (see control:1)
-  READING & 0x10 = 0x00: no software event
-
-  READING & 0x08 = 0x08: watchdog event (see wdog:2)
-  READING & 0x08 = 0x00: no watchdog event
-
-  READING & 0x02 = 0x02: thermal event (see temp*:1)
-  READING & 0x02 = 0x00: no thermal event
-
-  READING & 0x01 = 0x01: fan event (see fan*:1)
-  READING & 0x01 = 0x00: no fan event
-
-  READING & 0x13 ! 0x00: ALERT LED is flashing
-
-* control
-  READING & 0x01 = 0x01: software event
-  READING & 0x01 = 0x00: no software event
-
-  WRITING & 0x01 = 0x01: set software event
-  WRITING & 0x01 = 0x00: clear software event
-
-* watchdog_control
-  READING & 0x80 = 0x80: power off on watchdog event while thermal event
-  READING & 0x80 = 0x00: watchdog power off disabled (just system reset enabled)
-
-  READING & 0x40 = 0x40: watchdog timebase 60 seconds (see also wdog:1)
-  READING & 0x40 = 0x00: watchdog timebase  2 seconds
-
-  READING & 0x10 = 0x10: watchdog enabled
-  READING & 0x10 = 0x00: watchdog disabled
-
-  WRITING & 0x80 = 0x80: enable "power off on watchdog event while thermal event"
-  WRITING & 0x80 = 0x00: disable "power off on watchdog event while thermal event"
-
-  WRITING & 0x40 = 0x40: set watchdog timebase to 60 seconds
-  WRITING & 0x40 = 0x00: set watchdog timebase to  2 seconds
-
-  WRITING & 0x20 = 0x20: disable watchdog
-
-  WRITING & 0x10 = 0x10: enable watchdog / restart watchdog time
-
-* watchdog_state
-  READING & 0x02 = 0x02: watchdog system reset occurred
-  READING & 0x02 = 0x00: no watchdog system reset occurred
-
-  WRITING & 0x02 = 0x02: clear watchdog event
-
-* watchdog_preset
-  READING & 0xff = 0x??: configured watch dog time in units (see wdog:3 0x40)
-
-  WRITING & 0xff = 0x??: configure watch dog time in units
-
-* in*     (0: +5V, 1: +12V, 2: onboard 3V battery)
-  READING: actual voltage value
-
-* temp*_status   (1: CPU sensor, 2: onboard sensor, 3: auxiliary sensor)
-  READING & 0x02 = 0x02: thermal event (overtemperature)
-  READING & 0x02 = 0x00: no thermal event
-
-  READING & 0x01 = 0x01: sensor is working
-  READING & 0x01 = 0x00: sensor is faulty
-
-  WRITING & 0x02 = 0x02: clear thermal event
-
-* temp*_input   (1: CPU sensor, 2: onboard sensor, 3: auxiliary sensor)
-  READING: actual temperature value
-
-* fan*_status   (1: power supply fan, 2: CPU fan, 3: auxiliary fan)
-  READING & 0x04 = 0x04: fan event (fan fault)
-  READING & 0x04 = 0x00: no fan event
-
-  WRITING & 0x04 = 0x04: clear fan event
-
-* fan*_div (1: power supply fan, 2: CPU fan, 3: auxiliary fan)
-  	Divisors 2,4 and 8 are supported, both for reading and writing
-
-* fan*_pwm   (1: power supply fan, 2: CPU fan, 3: auxiliary fan)
-  READING & 0xff = 0x00: fan may be switched off
-  READING & 0xff = 0x01: fan must run at least at minimum speed (supply: 6V)
-  READING & 0xff = 0xff: fan must run at maximum speed (supply: 12V)
-  READING & 0xff = 0x??: fan must run at least at given speed (supply: 6V..12V)
-
-  WRITING & 0xff = 0x00: fan may be switched off
-  WRITING & 0xff = 0x01: fan must run at least at minimum speed (supply: 6V)
-  WRITING & 0xff = 0xff: fan must run at maximum speed (supply: 12V)
-  WRITING & 0xff = 0x??: fan must run at least at given speed (supply: 6V..12V)
-
-* fan*_input   (1: power supply fan, 2: CPU fan, 3: auxiliary fan)
-  READING: actual RPM value
-
-
-Limitations
------------
-
-* Measuring fan speed
-It seems that the chip counts "ripples" (typical fans produce 2 ripples per
-rotation while VERAX fans produce 18) in a 9-bit register. This register is
-read out every second, then the ripple prescaler (2, 4 or 8) is applied and
-the result is stored in the 8 bit output register. Due to the limitation of
-the counting register to 9 bits, it is impossible to measure a VERAX fan
-properly (even with a prescaler of 8). At its maximum speed of 3500 RPM the
-fan produces 1080 ripples per second which causes the counting register to
-overflow twice, leading to only 186 RPM.
-
-* Measuring input voltages
-in2 ("battery") reports the voltage of the onboard lithium battery and not
-+3.3V from the power supply.
-
-* Undocumented features
-Fujitsu-Siemens Computers has not documented all features of the chip so
-far. Their software, System Guard, shows that there are a still some
-features which cannot be controlled by this implementation.

Documentation/hwmon/ltc4215

@@ -22,12 +22,13 @@ Usage Notes
 -----------
 
 This driver does not probe for LTC4215 devices, due to the fact that some
-of the possible addresses are unfriendly to probing. You will need to use
-the "force" parameter to tell the driver where to find the device.
+of the possible addresses are unfriendly to probing. You will have to
+instantiate the devices explicitly.
 
 Example: the following will load the driver for an LTC4215 at address 0x44
 on I2C bus #0:
-$ modprobe ltc4215 force=0,0x44
+$ modprobe ltc4215
+$ echo ltc4215 0x44 > /sys/bus/i2c/devices/i2c-0/new_device
 
 
 Sysfs entries

Documentation/hwmon/ltc4245

@@ -23,12 +23,13 @@ Usage Notes
 -----------
 
 This driver does not probe for LTC4245 devices, due to the fact that some
-of the possible addresses are unfriendly to probing. You will need to use
-the "force" parameter to tell the driver where to find the device.
+of the possible addresses are unfriendly to probing. You will have to
+instantiate the devices explicitly.
 
 Example: the following will load the driver for an LTC4245 at address 0x23
 on I2C bus #1:
-$ modprobe ltc4245 force=1,0x23
+$ modprobe ltc4245
+$ echo ltc4245 0x23 > /sys/bus/i2c/devices/i2c-1/new_device
 
 
 Sysfs entries

Documentation/i2c/instantiating-devices

@@ -188,7 +188,7 @@ segment, the address is sufficient to uniquely identify the device to be
 deleted.
 
 Example:
-# echo eeprom 0x50 > /sys/class/i2c-adapter/i2c-3/new_device
+# echo eeprom 0x50 > /sys/bus/i2c/devices/i2c-3/new_device
 
 While this interface should only be used when in-kernel device declaration
 can't be done, there is a variety of cases where it can be helpful:

Documentation/infiniband/user_mad.txt

@@ -128,8 +128,8 @@ Setting IsSM Capability Bit
   To create the appropriate character device files automatically with
   udev, a rule like
 
-    KERNEL="umad*", NAME="infiniband/%k"
-    KERNEL="issm*", NAME="infiniband/%k"
+    KERNEL=="umad*", NAME="infiniband/%k"
+    KERNEL=="issm*", NAME="infiniband/%k"
 
   can be used.  This will create device nodes named
 

Documentation/infiniband/user_verbs.txt

@@ -58,7 +58,7 @@ Memory pinning
   To create the appropriate character device files automatically with
   udev, a rule like
 
-    KERNEL="uverbs*", NAME="infiniband/%k"
+    KERNEL=="uverbs*", NAME="infiniband/%k"
 
   can be used.  This will create device nodes named
 

Documentation/ioctl/ioctl-number.txt

@@ -135,6 +135,7 @@ Code	Seq#	Include File		Comments
 					<http://mikonos.dia.unisa.it/tcfs>
 'l'	40-7F	linux/udf_fs_i.h	in development:
 					<http://sourceforge.net/projects/linux-udf/>
+'m'	00-09	linux/mmtimer.h
 'm'	all	linux/mtio.h		conflict!
 'm'	all	linux/soundcard.h	conflict!
 'm'	all	linux/synclink.h	conflict!

Documentation/isdn/INTERFACE.CAPI

@@ -60,10 +60,9 @@ open() operation on regular files or character devices.
 
 After a successful return from register_appl(), CAPI messages from the
 application may be passed to the driver for the device via calls to the
-send_message() callback function. The CAPI message to send is stored in the
-data portion of an skb. Conversely, the driver may call Kernel CAPI's
-capi_ctr_handle_message() function to pass a received CAPI message to Kernel
-CAPI for forwarding to an application, specifying its ApplID.
+send_message() callback function. Conversely, the driver may call Kernel
+CAPI's capi_ctr_handle_message() function to pass a received CAPI message to
+Kernel CAPI for forwarding to an application, specifying its ApplID.
 
 Deregistration requests (CAPI operation CAPI_RELEASE) from applications are
 forwarded as calls to the release_appl() callback function, passing the same
@@ -142,6 +141,7 @@ u16  (*send_message)(struct capi_ctr *ctrlr, struct sk_buff *skb)
 	to accepting or queueing the message. Errors occurring during the
 	actual processing of the message should be signaled with an
 	appropriate reply message.
+	May be called in process or interrupt context.
 	Calls to this function are not serialized by Kernel CAPI, ie. it must
 	be prepared to be re-entered.
 
@@ -154,7 +154,8 @@ read_proc_t *ctr_read_proc
 	system entry, /proc/capi/controllers/<n>; will be called with a
 	pointer to the device's capi_ctr structure as the last (data) argument
 
-Note: Callback functions are never called in interrupt context.
+Note: Callback functions except send_message() are never called in interrupt
+context.
 
 - to be filled in before calling capi_ctr_ready():
 
@@ -171,14 +172,40 @@ u8 serial[CAPI_SERIAL_LEN]
 	value to return for CAPI_GET_SERIAL
 
 
-4.3 The _cmsg Structure
+4.3 SKBs
+
+CAPI messages are passed between Kernel CAPI and the driver via send_message()
+and capi_ctr_handle_message(), stored in the data portion of a socket buffer
+(skb).  Each skb contains a single CAPI message coded according to the CAPI 2.0
+standard.
+
+For the data transfer messages, DATA_B3_REQ and DATA_B3_IND, the actual
+payload data immediately follows the CAPI message itself within the same skb.
+The Data and Data64 parameters are not used for processing. The Data64
+parameter may be omitted by setting the length field of the CAPI message to 22
+instead of 30.
+
+
+4.4 The _cmsg Structure
 
 (declared in <linux/isdn/capiutil.h>)
 
 The _cmsg structure stores the contents of a CAPI 2.0 message in an easily
-accessible form. It contains members for all possible CAPI 2.0 parameters, of
-which only those appearing in the message type currently being processed are
-actually used. Unused members should be set to zero.
+accessible form. It contains members for all possible CAPI 2.0 parameters,
+including subparameters of the Additional Info and B Protocol structured
+parameters, with the following exceptions:
+
+* second Calling party number (CONNECT_IND)
+
+* Data64 (DATA_B3_REQ and DATA_B3_IND)
+
+* Sending complete (subparameter of Additional Info, CONNECT_REQ and INFO_REQ)
+
+* Global Configuration (subparameter of B Protocol, CONNECT_REQ, CONNECT_RESP
+  and SELECT_B_PROTOCOL_REQ)
+
+Only those parameters appearing in the message type currently being processed
+are actually used. Unused members should be set to zero.
 
 Members are named after the CAPI 2.0 standard names of the parameters they
 represent. See <linux/isdn/capiutil.h> for the exact spelling. Member data
@@ -190,18 +217,19 @@ u16         for CAPI parameters of type 'word'
 
 u32         for CAPI parameters of type 'dword'
 
-_cstruct    for CAPI parameters of type 'struct' not containing any
-	    variably-sized (struct) subparameters (eg. 'Called Party Number')
+_cstruct    for CAPI parameters of type 'struct'
 	    The member is a pointer to a buffer containing the parameter in
 	    CAPI encoding (length + content). It may also be NULL, which will
 	    be taken to represent an empty (zero length) parameter.
+	    Subparameters are stored in encoded form within the content part.
 
-_cmstruct   for CAPI parameters of type 'struct' containing 'struct'
-	    subparameters ('Additional Info' and 'B Protocol')
+_cmstruct   alternative representation for CAPI parameters of type 'struct'
+	    (used only for the 'Additional Info' and 'B Protocol' parameters)
 	    The representation is a single byte containing one of the values:
-	    CAPI_DEFAULT: the parameter is empty
-	    CAPI_COMPOSE: the values of the subparameters are stored
-	    individually in the corresponding _cmsg structure members
+	    CAPI_DEFAULT: The parameter is empty/absent.
+	    CAPI_COMPOSE: The parameter is present.
+	    Subparameter values are stored individually in the corresponding
+	    _cmsg structure members.
 
 Functions capi_cmsg2message() and capi_message2cmsg() are provided to convert
 messages between their transport encoding described in the CAPI 2.0 standard
@@ -297,3 +325,26 @@ char *capi_cmd2str(u8 Command, u8 Subcommand)
 	be NULL if the command/subcommand is not one of those defined in the
 	CAPI 2.0 standard.
 
+
+7. Debugging
+
+The module kernelcapi has a module parameter showcapimsgs controlling some
+debugging output produced by the module. It can only be set when the module is
+loaded, via a parameter "showcapimsgs=<n>" to the modprobe command, either on
+the command line or in the configuration file.
+
+If the lowest bit of showcapimsgs is set, kernelcapi logs controller and
+application up and down events.
+
+In addition, every registered CAPI controller has an associated traceflag
+parameter controlling how CAPI messages sent from and to tha controller are
+logged. The traceflag parameter is initialized with the value of the
+showcapimsgs parameter when the controller is registered, but can later be
+changed via the MANUFACTURER_REQ command KCAPI_CMD_TRACE.
+
+If the value of traceflag is non-zero, CAPI messages are logged.
+DATA_B3 messages are only logged if the value of traceflag is > 2.
+
+If the lowest bit of traceflag is set, only the command/subcommand and message
+length are logged. Otherwise, kernelcapi logs a readable representation of
+the entire message.

Documentation/kbuild/kbuild.txt

@@ -65,6 +65,22 @@ INSTALL_PATH
 INSTALL_PATH specifies where to place the updated kernel and system map
 images. Default is /boot, but you can set it to other values.
 
+INSTALLKERNEL
+--------------------------------------------------
+Install script called when using "make install".
+The default name is "installkernel".
+
+The script will be called with the following arguments:
+    $1 - kernel version
+    $2 - kernel image file
+    $3 - kernel map file
+    $4 - default install path (use root directory if blank)
+
+The implmentation of "make install" is architecture specific
+and it may differ from the above.
+
+INSTALLKERNEL is provided to enable the possibility to
+specify a custom installer when cross compiling a kernel.
 
 MODLIB
 --------------------------------------------------

Documentation/kbuild/makefiles.txt

@@ -18,6 +18,7 @@ This document describes the Linux kernel Makefiles.
 	   --- 3.9 Dependency tracking
 	   --- 3.10 Special Rules
 	   --- 3.11 $(CC) support functions
+	   --- 3.12 $(LD) support functions
 
 	=== 4 Host Program support
 	   --- 4.1 Simple Host Program
@@ -435,14 +436,14 @@ more details, with real examples.
 	The second argument is optional, and if supplied will be used
 	if first argument is not supported.
 
-    ld-option
-	ld-option is used to check if $(CC) when used to link object files
+    cc-ldoption
+	cc-ldoption is used to check if $(CC) when used to link object files
 	supports the given option.  An optional second option may be
 	specified if first option are not supported.
 
 	Example:
 		#arch/i386/kernel/Makefile
-		vsyscall-flags += $(call ld-option, -Wl$(comma)--hash-style=sysv)
+		vsyscall-flags += $(call cc-ldoption, -Wl$(comma)--hash-style=sysv)
 
 	In the above example, vsyscall-flags will be assigned the option
 	-Wl$(comma)--hash-style=sysv if it is supported by $(CC).
@@ -570,6 +571,19 @@ more details, with real examples.
 			endif
 		endif
 
+--- 3.12 $(LD) support functions
+
+    ld-option
+	ld-option is used to check if $(LD) supports the supplied option.
+	ld-option takes two options as arguments.
+	The second argument is an optional option that can be used if the
+	first option is not supported by $(LD).
+
+	Example:
+		#Makefile
+		LDFLAGS_vmlinux += $(call really-ld-option, -X)
+
+
 === 4 Host Program support
 
 Kbuild supports building executables on the host for use during the

Documentation/kernel-parameters.txt

@@ -671,6 +671,7 @@ and is between 256 and 4096 characters. It is defined in the file
 	earlyprintk=	[X86,SH,BLACKFIN]
 			earlyprintk=vga
 			earlyprintk=serial[,ttySn[,baudrate]]
+			earlyprintk=ttySn[,baudrate]
 			earlyprintk=dbgp[debugController#]
 
 			Append ",keep" to not disable it when the real console

Documentation/laptops/thinkpad-acpi.txt

@@ -199,18 +199,22 @@ kind to allow it (and it often doesn't!).
 
 Not all bits in the mask can be modified.  Not all bits that can be
 modified do anything.  Not all hot keys can be individually controlled
-by the mask.  Some models do not support the mask at all, and in those
-models, hot keys cannot be controlled individually.  The behaviour of
-the mask is, therefore, highly dependent on the ThinkPad model.
+by the mask.  Some models do not support the mask at all.  The behaviour
+of the mask is, therefore, highly dependent on the ThinkPad model.
+
+The driver will filter out any unmasked hotkeys, so even if the firmware
+doesn't allow disabling an specific hotkey, the driver will not report
+events for unmasked hotkeys.
 
 Note that unmasking some keys prevents their default behavior.  For
 example, if Fn+F5 is unmasked, that key will no longer enable/disable
-Bluetooth by itself.
+Bluetooth by itself in firmware.
 
-Note also that not all Fn key combinations are supported through ACPI.
-For example, on the X40, the brightness, volume and "Access IBM" buttons
-do not generate ACPI events even with this driver.  They *can* be used
-through the "ThinkPad Buttons" utility, see http://www.nongnu.org/tpb/
+Note also that not all Fn key combinations are supported through ACPI
+depending on the ThinkPad model and firmware version.  On those
+ThinkPads, it is still possible to support some extra hotkeys by
+polling the "CMOS NVRAM" at least 10 times per second.  The driver
+attempts to enables this functionality automatically when required.
 
 procfs notes:
 
@@ -255,18 +259,11 @@ sysfs notes:
 		1: does nothing
 
 	hotkey_mask:
-		bit mask to enable driver-handling (and depending on
+		bit mask to enable reporting (and depending on
 		the firmware, ACPI event generation) for each hot key
 		(see above).  Returns the current status of the hot keys
 		mask, and allows one to modify it.
 
-		Note: when NVRAM polling is active, the firmware mask
-		will be different from the value returned by
-		hotkey_mask.  The driver will retain enabled bits for
-		hotkeys that are under NVRAM polling even if the
-		firmware refuses them, and will not set these bits on
-		the firmware hot key mask.
-
 	hotkey_all_mask:
 		bit mask that should enable event reporting for all
 		supported hot keys, when echoed to hotkey_mask above.
@@ -279,7 +276,8 @@ sysfs notes:
 		bit mask that should enable event reporting for all
 		supported hot keys, except those which are always
 		handled by the firmware anyway.  Echo it to
-		hotkey_mask above, to use.
+		hotkey_mask above, to use.  This is the default mask
+		used by the driver.
 
 	hotkey_source_mask:
 		bit mask that selects which hot keys will the driver
@@ -287,9 +285,10 @@ sysfs notes:
 		based on the capabilities reported by the ACPI firmware,
 		but it can be overridden at runtime.
 
-		Hot keys whose bits are set in both hotkey_source_mask
-		and also on hotkey_mask are polled for in NVRAM.  Only a
-		few hot keys are available through CMOS NVRAM polling.
+		Hot keys whose bits are set in hotkey_source_mask are
+		polled for in NVRAM, and reported as hotkey events if
+		enabled in hotkey_mask.  Only a few hot keys are
+		available through CMOS NVRAM polling.
 
 		Warning: when in NVRAM mode, the volume up/down/mute
 		keys are synthesized according to changes in the mixer,
@@ -525,6 +524,7 @@ compatibility purposes when hotkey_report_mode is set to 1.
 0x2305		System is waking up from suspend to eject bay
 0x2404		System is waking up from hibernation to undock
 0x2405		System is waking up from hibernation to eject bay
+0x5010		Brightness level changed/control event
 
 The above events are never propagated by the driver.
 
@@ -532,7 +532,6 @@ The above events are never propagated by the driver.
 0x4003		Undocked (see 0x2x04), can sleep again
 0x500B		Tablet pen inserted into its storage bay
 0x500C		Tablet pen removed from its storage bay
-0x5010		Brightness level changed (newer Lenovo BIOSes)
 
 The above events are propagated by the driver.
 
@@ -621,6 +620,8 @@ For Lenovo models *with* ACPI backlight control:
 2. Do *NOT* load up ACPI video, enable the hotkeys in thinkpad-acpi,
    and map them to KEY_BRIGHTNESS_UP and KEY_BRIGHTNESS_DOWN.  Process
    these keys on userspace somehow (e.g. by calling xbacklight).
+   The driver will do this automatically if it detects that ACPI video
+   has been disabled.
 
 
 Bluetooth
@@ -1459,3 +1460,8 @@ Sysfs interface changelog:
 0x020400:	Marker for 16 LEDs support.  Also, LEDs that are known
 		to not exist in a given model are not registered with
 		the LED sysfs class anymore.
+
+0x020500:	Updated hotkey driver, hotkey_mask is always available
+		and it is always able to disable hot keys.  Very old
+		thinkpads are properly supported.  hotkey_bios_mask
+		is deprecated and marked for removal.

Documentation/i2c/chips/max6875 → Documentation/misc-devices/max6875

@@ -42,10 +42,12 @@ General Remarks
 
 Valid addresses for the MAX6875 are 0x50 and 0x52.
 Valid addresses for the MAX6874 are 0x50, 0x52, 0x54 and 0x56.
-The driver does not probe any address, so you must force the address.
+The driver does not probe any address, so you explicitly instantiate the
+devices.
 
 Example:
-$ modprobe max6875 force=0,0x50
+$ modprobe max6875
+$ echo max6875 0x50 > /sys/bus/i2c/devices/i2c-0/new_device
 
 The MAX6874/MAX6875 ignores address bit 0, so this driver attaches to multiple
 addresses.  For example, for address 0x50, it also reserves 0x51.

Documentation/networking/pktgen.txt

@@ -90,6 +90,11 @@ Examples:
  pgset "dstmac 00:00:00:00:00:00"    sets MAC destination address
  pgset "srcmac 00:00:00:00:00:00"    sets MAC source address
 
+ pgset "queue_map_min 0" Sets the min value of tx queue interval
+ pgset "queue_map_max 7" Sets the max value of tx queue interval, for multiqueue devices
+                         To select queue 1 of a given device,
+                         use queue_map_min=1 and queue_map_max=1
+
  pgset "src_mac_count 1" Sets the number of MACs we'll range through.  
                          The 'minimum' MAC is what you set with srcmac.
 
@@ -101,6 +106,9 @@ Examples:
                               IPDST_RND, UDPSRC_RND,
                               UDPDST_RND, MACSRC_RND, MACDST_RND 
                               MPLS_RND, VID_RND, SVID_RND
+                              QUEUE_MAP_RND # queue map random
+                              QUEUE_MAP_CPU # queue map mirrors smp_processor_id()
+
 
  pgset "udp_src_min 9"   set UDP source port min, If < udp_src_max, then
                          cycle through the port range.

Documentation/networking/timestamping/timestamping.c

@@ -381,7 +381,7 @@ int main(int argc, char **argv)
 	memset(&hwtstamp, 0, sizeof(hwtstamp));
 	strncpy(hwtstamp.ifr_name, interface, sizeof(hwtstamp.ifr_name));
 	hwtstamp.ifr_data = (void *)&hwconfig;
-	memset(&hwconfig, 0, sizeof(&hwconfig));
+	memset(&hwconfig, 0, sizeof(hwconfig));
 	hwconfig.tx_type =
 		(so_timestamping_flags & SOF_TIMESTAMPING_TX_HARDWARE) ?
 		HWTSTAMP_TX_ON : HWTSTAMP_TX_OFF;

Documentation/scsi/hptiop.txt

@@ -3,6 +3,25 @@ HIGHPOINT ROCKETRAID 3xxx/4xxx ADAPTER DRIVER (hptiop)
 Controller Register Map
 -------------------------
 
+For RR44xx Intel IOP based adapters, the controller IOP is accessed via PCI BAR0 and BAR2:
+
+     BAR0 offset    Register
+            0x11C5C Link Interface IRQ Set
+            0x11C60 Link Interface IRQ Clear
+
+     BAR2 offset    Register
+            0x10    Inbound Message Register 0
+            0x14    Inbound Message Register 1
+            0x18    Outbound Message Register 0
+            0x1C    Outbound Message Register 1
+            0x20    Inbound Doorbell Register
+            0x24    Inbound Interrupt Status Register
+            0x28    Inbound Interrupt Mask Register
+            0x30    Outbound Interrupt Status Register
+            0x34    Outbound Interrupt Mask Register
+            0x40    Inbound Queue Port
+            0x44    Outbound Queue Port
+
 For Intel IOP based adapters, the controller IOP is accessed via PCI BAR0:
 
      BAR0 offset    Register
@@ -93,7 +112,7 @@ The driver exposes following sysfs attributes:
 
 
 -----------------------------------------------------------------------------
-Copyright (C) 2006-2007 HighPoint Technologies, Inc. All Rights Reserved.
+Copyright (C) 2006-2009 HighPoint Technologies, Inc. All Rights Reserved.
 
   This file is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of

Documentation/sound/alsa/HD-Audio-Models.txt

@@ -209,6 +209,7 @@ AD1884A / AD1883 / AD1984A / AD1984B
   laptop	laptop with HP jack sensing
   mobile	mobile devices with HP jack sensing
   thinkpad	Lenovo Thinkpad X300
+  touchsmart	HP Touchsmart
 
 AD1884
 ======
@@ -358,6 +359,7 @@ STAC9227/9228/9229/927x
   5stack-no-fp	D965 5stack without front panel
   dell-3stack	Dell Dimension E520
   dell-bios	Fixes with Dell BIOS setup
+  volknob	Fixes with volume-knob widget 0x24
   auto		BIOS setup (default)
 
 STAC92HD71B*

Documentation/sysctl/fs.txt

@@ -96,13 +96,16 @@ handles that the Linux kernel will allocate. When you get lots
 of error messages about running out of file handles, you might
 want to increase this limit.
 
-The three values in file-nr denote the number of allocated
-file handles, the number of unused file handles and the maximum
-number of file handles. When the allocated file handles come
-close to the maximum, but the number of unused file handles is
-significantly greater than 0, you've encountered a peak in your 
-usage of file handles and you don't need to increase the maximum.
-
+Historically, the three values in file-nr denoted the number of
+allocated file handles, the number of allocated but unused file
+handles, and the maximum number of file handles. Linux 2.6 always
+reports 0 as the number of free file handles -- this is not an
+error, it just means that the number of allocated file handles
+exactly matches the number of used file handles.
+
+Attempts to allocate more file descriptors than file-max are
+reported with printk, look for "VFS: file-max limit <number>
+reached".
 ==============================================================
 
 nr_open:

Documentation/sysctl/kernel.txt

@@ -22,6 +22,7 @@ show up in /proc/sys/kernel:
 - callhome		     [ S390 only ]
 - auto_msgmni
 - core_pattern
+- core_pipe_limit
 - core_uses_pid
 - ctrl-alt-del
 - dentry-state
@@ -135,6 +136,27 @@ core_pattern is used to specify a core dumpfile pattern name.
 
 ==============================================================
 
+core_pipe_limit:
+
+This sysctl is only applicable when core_pattern is configured to pipe core
+files to user space helper a (when the first character of core_pattern is a '|',
+see above).  When collecting cores via a pipe to an application, it is
+occasionally usefull for the collecting application to gather data about the
+crashing process from its /proc/pid directory.  In order to do this safely, the
+kernel must wait for the collecting process to exit, so as not to remove the
+crashing processes proc files prematurely.  This in turn creates the possibility
+that a misbehaving userspace collecting process can block the reaping of a
+crashed process simply by never exiting.  This sysctl defends against that.  It
+defines how many concurrent crashing processes may be piped to user space
+applications in parallel.  If this value is exceeded, then those crashing
+processes above that value are noted via the kernel log and their cores are
+skipped.  0 is a special value, indicating that unlimited processes may be
+captured in parallel, but that no waiting will take place (i.e. the collecting
+process is not guaranteed access to /proc/<crahing pid>/).  This value defaults
+to 0.
+
+==============================================================
+
 core_uses_pid:
 
 The default coredump filename is "core".  By setting

Documentation/sysctl/vm.txt

@@ -32,6 +32,8 @@ Currently, these files are in /proc/sys/vm:
 - legacy_va_layout
 - lowmem_reserve_ratio
 - max_map_count
+- memory_failure_early_kill
+- memory_failure_recovery
 - min_free_kbytes
 - min_slab_ratio
 - min_unmapped_ratio
@@ -53,7 +55,6 @@ Currently, these files are in /proc/sys/vm:
 - vfs_cache_pressure
 - zone_reclaim_mode
 
-
 ==============================================================
 
 block_dump
@@ -275,6 +276,44 @@ e.g., up to one or two maps per allocation.
 
 The default value is 65536.
 
+=============================================================
+
+memory_failure_early_kill:
+
+Control how to kill processes when uncorrected memory error (typically
+a 2bit error in a memory module) is detected in the background by hardware
+that cannot be handled by the kernel. In some cases (like the page
+still having a valid copy on disk) the kernel will handle the failure
+transparently without affecting any applications. But if there is
+no other uptodate copy of the data it will kill to prevent any data
+corruptions from propagating.
+
+1: Kill all processes that have the corrupted and not reloadable page mapped
+as soon as the corruption is detected.  Note this is not supported
+for a few types of pages, like kernel internally allocated data or
+the swap cache, but works for the majority of user pages.
+
+0: Only unmap the corrupted page from all processes and only kill a process
+who tries to access it.
+
+The kill is done using a catchable SIGBUS with BUS_MCEERR_AO, so processes can
+handle this if they want to.
+
+This is only active on architectures/platforms with advanced machine
+check handling and depends on the hardware capabilities.
+
+Applications can override this setting individually with the PR_MCE_KILL prctl
+
+==============================================================
+
+memory_failure_recovery
+
+Enable memory failure recovery (when supported by the platform)
+
+1: Attempt recovery.
+
+0: Always panic on a memory failure.
+
 ==============================================================
 
 min_free_kbytes:

Documentation/vm/.gitignore

@@ -1 +1,2 @@
+page-types
 slabinfo

Documentation/vm/ksm.txt

@@ -52,15 +52,15 @@ The KSM daemon is controlled by sysfs files in /sys/kernel/mm/ksm/,
 readable by all but writable only by root:
 
 max_kernel_pages - set to maximum number of kernel pages that KSM may use
-                   e.g. "echo 2000 > /sys/kernel/mm/ksm/max_kernel_pages"
+                   e.g. "echo 100000 > /sys/kernel/mm/ksm/max_kernel_pages"
                    Value 0 imposes no limit on the kernel pages KSM may use;
                    but note that any process using MADV_MERGEABLE can cause
                    KSM to allocate these pages, unswappable until it exits.
-                   Default: 2000 (chosen for demonstration purposes)
+                   Default: quarter of memory (chosen to not pin too much)
 
 pages_to_scan    - how many present pages to scan before ksmd goes to sleep
-                   e.g. "echo 200 > /sys/kernel/mm/ksm/pages_to_scan"
-                   Default: 200 (chosen for demonstration purposes)
+                   e.g. "echo 100 > /sys/kernel/mm/ksm/pages_to_scan"
+                   Default: 100 (chosen for demonstration purposes)
 
 sleep_millisecs  - how many milliseconds ksmd should sleep before next scan
                    e.g. "echo 20 > /sys/kernel/mm/ksm/sleep_millisecs"
@@ -70,7 +70,8 @@ run              - set 0 to stop ksmd from running but keep merged pages,
                    set 1 to run ksmd e.g. "echo 1 > /sys/kernel/mm/ksm/run",
                    set 2 to stop ksmd and unmerge all pages currently merged,
                          but leave mergeable areas registered for next run
-                   Default: 1 (for immediate use by apps which register)
+                   Default: 0 (must be changed to 1 to activate KSM,
+                               except if CONFIG_SYSFS is disabled)
 
 The effectiveness of KSM and MADV_MERGEABLE is shown in /sys/kernel/mm/ksm/:
 
@@ -86,4 +87,4 @@ pages_volatile embraces several different kinds of activity, but a high
 proportion there would also indicate poor use of madvise MADV_MERGEABLE.
 
 Izik Eidus,
-Hugh Dickins, 30 July 2009
+Hugh Dickins, 24 Sept 2009

Documentation/vm/locking

@@ -80,7 +80,7 @@ Note: PTL can also be used to guarantee that no new clones using the
 mm start up ... this is a loose form of stability on mm_users. For
 example, it is used in copy_mm to protect against a racing tlb_gather_mmu
 single address space optimization, so that the zap_page_range (from
-vmtruncate) does not lose sending ipi's to cloned threads that might 
+truncate) does not lose sending ipi's to cloned threads that might
 be spawned underneath it and go to user mode to drag in pte's into tlbs.
 
 swap_lock

Documentation/vm/page-types.c

@@ -2,9 +2,13 @@
  * page-types: Tool for querying page flags
  *
  * Copyright (C) 2009 Intel corporation
- * Copyright (C) 2009 Wu Fengguang <fengguang.wu@intel.com>
+ *
+ * Authors: Wu Fengguang <fengguang.wu@intel.com>
+ *
+ * Released under the General Public License (GPL).
  */
 
+#define _LARGEFILE64_SOURCE
 #include <stdio.h>
 #include <stdlib.h>
 #include <unistd.h>
@@ -13,11 +17,32 @@
 #include <string.h>
 #include <getopt.h>
 #include <limits.h>
+#include <assert.h>
 #include <sys/types.h>
 #include <sys/errno.h>
 #include <sys/fcntl.h>
 
 
+/*
+ * pagemap kernel ABI bits
+ */
+
+#define PM_ENTRY_BYTES      sizeof(uint64_t)
+#define PM_STATUS_BITS      3
+#define PM_STATUS_OFFSET    (64 - PM_STATUS_BITS)
+#define PM_STATUS_MASK      (((1LL << PM_STATUS_BITS) - 1) << PM_STATUS_OFFSET)
+#define PM_STATUS(nr)       (((nr) << PM_STATUS_OFFSET) & PM_STATUS_MASK)
+#define PM_PSHIFT_BITS      6
+#define PM_PSHIFT_OFFSET    (PM_STATUS_OFFSET - PM_PSHIFT_BITS)
+#define PM_PSHIFT_MASK      (((1LL << PM_PSHIFT_BITS) - 1) << PM_PSHIFT_OFFSET)
+#define PM_PSHIFT(x)        (((u64) (x) << PM_PSHIFT_OFFSET) & PM_PSHIFT_MASK)
+#define PM_PFRAME_MASK      ((1LL << PM_PSHIFT_OFFSET) - 1)
+#define PM_PFRAME(x)        ((x) & PM_PFRAME_MASK)
+
+#define PM_PRESENT          PM_STATUS(4LL)
+#define PM_SWAP             PM_STATUS(2LL)
+
+
 /*
  * kernel page flags
  */
@@ -47,7 +72,9 @@
 #define KPF_COMPOUND_TAIL	16
 #define KPF_HUGE		17
 #define KPF_UNEVICTABLE		18
+#define KPF_HWPOISON		19
 #define KPF_NOPAGE		20
+#define KPF_KSM			21
 
 /* [32-] kernel hacking assistances */
 #define KPF_RESERVED		32
@@ -94,7 +121,9 @@ static char *page_flag_names[] = {
 	[KPF_COMPOUND_TAIL]	= "T:compound_tail",
 	[KPF_HUGE]		= "G:huge",
 	[KPF_UNEVICTABLE]	= "u:unevictable",
+	[KPF_HWPOISON]		= "X:hwpoison",
 	[KPF_NOPAGE]		= "n:nopage",
+	[KPF_KSM]		= "x:ksm",
 
 	[KPF_RESERVED]		= "r:reserved",
 	[KPF_MLOCKED]		= "m:mlocked",
@@ -126,6 +155,11 @@ static int		nr_addr_ranges;
 static unsigned long	opt_offset[MAX_ADDR_RANGES];
 static unsigned long	opt_size[MAX_ADDR_RANGES];
 
+#define MAX_VMAS	10240
+static int		nr_vmas;
+static unsigned long	pg_start[MAX_VMAS];
+static unsigned long	pg_end[MAX_VMAS];
+
 #define MAX_BIT_FILTERS	64
 static int		nr_bit_filters;
 static uint64_t		opt_mask[MAX_BIT_FILTERS];
@@ -133,9 +167,15 @@ static uint64_t		opt_bits[MAX_BIT_FILTERS];
 
 static int		page_size;
 
-#define PAGES_BATCH	(64 << 10)	/* 64k pages */
+static int		pagemap_fd;
 static int		kpageflags_fd;
-static uint64_t		kpageflags_buf[KPF_BYTES * PAGES_BATCH];
+
+static int		opt_hwpoison;
+static int		opt_unpoison;
+
+static char		*hwpoison_debug_fs = "/debug/hwpoison";
+static int		hwpoison_inject_fd;
+static int		hwpoison_forget_fd;
 
 #define HASH_SHIFT	13
 #define HASH_SIZE	(1 << HASH_SHIFT)
@@ -158,6 +198,11 @@ static uint64_t 	page_flags[HASH_SIZE];
 	type __min2 = (y);			\
 	__min1 < __min2 ? __min1 : __min2; })
 
+#define max_t(type, x, y) ({			\
+	type __max1 = (x);			\
+	type __max2 = (y);			\
+	__max1 > __max2 ? __max1 : __max2; })
+
 static unsigned long pages2mb(unsigned long pages)
 {
 	return (pages * page_size) >> 20;
@@ -173,6 +218,74 @@ static void fatal(const char *x, ...)
 	exit(EXIT_FAILURE);
 }
 
+int checked_open(const char *pathname, int flags)
+{
+	int fd = open(pathname, flags);
+
+	if (fd < 0) {
+		perror(pathname);
+		exit(EXIT_FAILURE);
+	}
+
+	return fd;
+}
+
+/*
+ * pagemap/kpageflags routines
+ */
+
+static unsigned long do_u64_read(int fd, char *name,
+				 uint64_t *buf,
+				 unsigned long index,
+				 unsigned long count)
+{
+	long bytes;
+
+	if (index > ULONG_MAX / 8)
+		fatal("index overflow: %lu\n", index);
+
+	if (lseek(fd, index * 8, SEEK_SET) < 0) {
+		perror(name);
+		exit(EXIT_FAILURE);
+	}
+
+	bytes = read(fd, buf, count * 8);
+	if (bytes < 0) {
+		perror(name);
+		exit(EXIT_FAILURE);
+	}
+	if (bytes % 8)
+		fatal("partial read: %lu bytes\n", bytes);
+
+	return bytes / 8;
+}
+
+static unsigned long kpageflags_read(uint64_t *buf,
+				     unsigned long index,
+				     unsigned long pages)
+{
+	return do_u64_read(kpageflags_fd, PROC_KPAGEFLAGS, buf, index, pages);
+}
+
+static unsigned long pagemap_read(uint64_t *buf,
+				  unsigned long index,
+				  unsigned long pages)
+{
+	return do_u64_read(pagemap_fd, "/proc/pid/pagemap", buf, index, pages);
+}
+
+static unsigned long pagemap_pfn(uint64_t val)
+{
+	unsigned long pfn;
+
+	if (val & PM_PRESENT)
+		pfn = PM_PFRAME(val);
+	else
+		pfn = 0;
+
+	return pfn;
+}
+
 
 /*
  * page flag names
@@ -221,29 +334,39 @@ static char *page_flag_longname(uint64_t flags)
  * page list and summary
  */
 
-static void show_page_range(unsigned long offset, uint64_t flags)
+static void show_page_range(unsigned long voffset,
+			    unsigned long offset, uint64_t flags)
 {
 	static uint64_t      flags0;
+	static unsigned long voff;
 	static unsigned long index;
 	static unsigned long count;
 
-	if (flags == flags0 && offset == index + count) {
+	if (flags == flags0 && offset == index + count &&
+	    (!opt_pid || voffset == voff + count)) {
 		count++;
 		return;
 	}
 
-	if (count)
-		printf("%lu\t%lu\t%s\n",
+	if (count) {
+		if (opt_pid)
+			printf("%lx\t", voff);
+		printf("%lx\t%lx\t%s\n",
 				index, count, page_flag_name(flags0));
+	}
 
 	flags0 = flags;
 	index  = offset;
+	voff   = voffset;
 	count  = 1;
 }
 
-static void show_page(unsigned long offset, uint64_t flags)
+static void show_page(unsigned long voffset,
+		      unsigned long offset, uint64_t flags)
 {
-	printf("%lu\t%s\n", offset, page_flag_name(flags));
+	if (opt_pid)
+		printf("%lx\t", voffset);
+	printf("%lx\t%s\n", offset, page_flag_name(flags));
 }
 
 static void show_summary(void)
@@ -320,6 +443,62 @@ static uint64_t well_known_flags(uint64_t flags)
 	return flags;
 }
 
+static uint64_t kpageflags_flags(uint64_t flags)
+{
+	flags = expand_overloaded_flags(flags);
+
+	if (!opt_raw)
+		flags = well_known_flags(flags);
+
+	return flags;
+}
+
+/*
+ * page actions
+ */
+
+static void prepare_hwpoison_fd(void)
+{
+	char buf[100];
+
+	if (opt_hwpoison && !hwpoison_inject_fd) {
+		sprintf(buf, "%s/corrupt-pfn", hwpoison_debug_fs);
+		hwpoison_inject_fd = checked_open(buf, O_WRONLY);
+	}
+
+	if (opt_unpoison && !hwpoison_forget_fd) {
+		sprintf(buf, "%s/renew-pfn", hwpoison_debug_fs);
+		hwpoison_forget_fd = checked_open(buf, O_WRONLY);
+	}
+}
+
+static int hwpoison_page(unsigned long offset)
+{
+	char buf[100];
+	int len;
+
+	len = sprintf(buf, "0x%lx\n", offset);
+	len = write(hwpoison_inject_fd, buf, len);
+	if (len < 0) {
+		perror("hwpoison inject");
+		return len;
+	}
+	return 0;
+}
+
+static int unpoison_page(unsigned long offset)
+{
+	char buf[100];
+	int len;
+
+	len = sprintf(buf, "0x%lx\n", offset);
+	len = write(hwpoison_forget_fd, buf, len);
+	if (len < 0) {
+		perror("hwpoison forget");
+		return len;
+	}
+	return 0;
+}
 
 /*
  * page frame walker
@@ -352,73 +531,124 @@ static int hash_slot(uint64_t flags)
 	exit(EXIT_FAILURE);
 }
 
-static void add_page(unsigned long offset, uint64_t flags)
+static void add_page(unsigned long voffset,
+		     unsigned long offset, uint64_t flags)
 {
-	flags = expand_overloaded_flags(flags);
-
-	if (!opt_raw)
-		flags = well_known_flags(flags);
+	flags = kpageflags_flags(flags);
 
 	if (!bit_mask_ok(flags))
 		return;
 
+	if (opt_hwpoison)
+		hwpoison_page(offset);
+	if (opt_unpoison)
+		unpoison_page(offset);
+
 	if (opt_list == 1)
-		show_page_range(offset, flags);
+		show_page_range(voffset, offset, flags);
 	else if (opt_list == 2)
-		show_page(offset, flags);
+		show_page(voffset, offset, flags);
 
 	nr_pages[hash_slot(flags)]++;
 	total_pages++;
 }
 
-static void walk_pfn(unsigned long index, unsigned long count)
+#define KPAGEFLAGS_BATCH	(64 << 10)	/* 64k pages */
+static void walk_pfn(unsigned long voffset,
+		     unsigned long index,
+		     unsigned long count)
 {
+	uint64_t buf[KPAGEFLAGS_BATCH];
 	unsigned long batch;
-	unsigned long n;
+	unsigned long pages;
 	unsigned long i;
 
-	if (index > ULONG_MAX / KPF_BYTES)
-		fatal("index overflow: %lu\n", index);
+	while (count) {
+		batch = min_t(unsigned long, count, KPAGEFLAGS_BATCH);
+		pages = kpageflags_read(buf, index, batch);
+		if (pages == 0)
+			break;
+
+		for (i = 0; i < pages; i++)
+			add_page(voffset + i, index + i, buf[i]);
+
+		index += pages;
+		count -= pages;
+	}
+}
 
-	lseek(kpageflags_fd, index * KPF_BYTES, SEEK_SET);
+#define PAGEMAP_BATCH	(64 << 10)
+static void walk_vma(unsigned long index, unsigned long count)
+{
+	uint64_t buf[PAGEMAP_BATCH];
+	unsigned long batch;
+	unsigned long pages;
+	unsigned long pfn;
+	unsigned long i;
 
 	while (count) {
-		batch = min_t(unsigned long, count, PAGES_BATCH);
-		n = read(kpageflags_fd, kpageflags_buf, batch * KPF_BYTES);
-		if (n == 0)
+		batch = min_t(unsigned long, count, PAGEMAP_BATCH);
+		pages = pagemap_read(buf, index, batch);
+		if (pages == 0)
 			break;
-		if (n < 0) {
-			perror(PROC_KPAGEFLAGS);
-			exit(EXIT_FAILURE);
+
+		for (i = 0; i < pages; i++) {
+			pfn = pagemap_pfn(buf[i]);
+			if (pfn)
+				walk_pfn(index + i, pfn, 1);
 		}
 
-		if (n % KPF_BYTES != 0)
-			fatal("partial read: %lu bytes\n", n);
-		n = n / KPF_BYTES;
+		index += pages;
+		count -= pages;
+	}
+}
+
+static void walk_task(unsigned long index, unsigned long count)
+{
+	const unsigned long end = index + count;
+	unsigned long start;
+	int i = 0;
+
+	while (index < end) {
 
-		for (i = 0; i < n; i++)
-			add_page(index + i, kpageflags_buf[i]);
+		while (pg_end[i] <= index)
+			if (++i >= nr_vmas)
+				return;
+		if (pg_start[i] >= end)
+			return;
 
-		index += batch;
-		count -= batch;
+		start = max_t(unsigned long, pg_start[i], index);
+		index = min_t(unsigned long, pg_end[i], end);
+
+		assert(start < index);
+		walk_vma(start, index - start);
 	}
 }
 
+static void add_addr_range(unsigned long offset, unsigned long size)
+{
+	if (nr_addr_ranges >= MAX_ADDR_RANGES)
+		fatal("too many addr ranges\n");
+
+	opt_offset[nr_addr_ranges] = offset;
+	opt_size[nr_addr_ranges] = min_t(unsigned long, size, ULONG_MAX-offset);
+	nr_addr_ranges++;
+}
+
 static void walk_addr_ranges(void)
 {
 	int i;
 
-	kpageflags_fd = open(PROC_KPAGEFLAGS, O_RDONLY);
-	if (kpageflags_fd < 0) {
-		perror(PROC_KPAGEFLAGS);
-		exit(EXIT_FAILURE);
-	}
+	kpageflags_fd = checked_open(PROC_KPAGEFLAGS, O_RDONLY);
 
 	if (!nr_addr_ranges)
-		walk_pfn(0, ULONG_MAX);
+		add_addr_range(0, ULONG_MAX);
 
 	for (i = 0; i < nr_addr_ranges; i++)
-		walk_pfn(opt_offset[i], opt_size[i]);
+		if (!opt_pid)
+			walk_pfn(0, opt_offset[i], opt_size[i]);
+		else
+			walk_task(opt_offset[i], opt_size[i]);
 
 	close(kpageflags_fd);
 }
@@ -446,20 +676,22 @@ static void usage(void)
 "            -r|--raw                  Raw mode, for kernel developers\n"
 "            -a|--addr    addr-spec    Walk a range of pages\n"
 "            -b|--bits    bits-spec    Walk pages with specified bits\n"
-#if 0 /* planned features */
 "            -p|--pid     pid          Walk process address space\n"
+#if 0 /* planned features */
 "            -f|--file    filename     Walk file address space\n"
 #endif
 "            -l|--list                 Show page details in ranges\n"
 "            -L|--list-each            Show page details one by one\n"
 "            -N|--no-summary           Don't show summay info\n"
+"            -X|--hwpoison             hwpoison pages\n"
+"            -x|--unpoison             unpoison pages\n"
 "            -h|--help                 Show this usage message\n"
 "addr-spec:\n"
 "            N                         one page at offset N (unit: pages)\n"
 "            N+M                       pages range from N to N+M-1\n"
 "            N,M                       pages range from N to M-1\n"
 "            N,                        pages range from N to end\n"
-"            ,M                        pages range from 0 to M\n"
+"            ,M                        pages range from 0 to M-1\n"
 "bits-spec:\n"
 "            bit1,bit2                 (flags & (bit1|bit2)) != 0\n"
 "            bit1,bit2=bit1            (flags & (bit1|bit2)) == bit1\n"
@@ -496,21 +728,53 @@ static unsigned long long parse_number(const char *str)
 
 static void parse_pid(const char *str)
 {
+	FILE *file;
+	char buf[5000];
+
 	opt_pid = parse_number(str);
-}
 
-static void parse_file(const char *name)
-{
+	sprintf(buf, "/proc/%d/pagemap", opt_pid);
+	pagemap_fd = checked_open(buf, O_RDONLY);
+
+	sprintf(buf, "/proc/%d/maps", opt_pid);
+	file = fopen(buf, "r");
+	if (!file) {
+		perror(buf);
+		exit(EXIT_FAILURE);
+	}
+
+	while (fgets(buf, sizeof(buf), file) != NULL) {
+		unsigned long vm_start;
+		unsigned long vm_end;
+		unsigned long long pgoff;
+		int major, minor;
+		char r, w, x, s;
+		unsigned long ino;
+		int n;
+
+		n = sscanf(buf, "%lx-%lx %c%c%c%c %llx %x:%x %lu",
+			   &vm_start,
+			   &vm_end,
+			   &r, &w, &x, &s,
+			   &pgoff,
+			   &major, &minor,
+			   &ino);
+		if (n < 10) {
+			fprintf(stderr, "unexpected line: %s\n", buf);
+			continue;
+		}
+		pg_start[nr_vmas] = vm_start / page_size;
+		pg_end[nr_vmas] = vm_end / page_size;
+		if (++nr_vmas >= MAX_VMAS) {
+			fprintf(stderr, "too many VMAs\n");
+			break;
+		}
+	}
+	fclose(file);
 }
 
-static void add_addr_range(unsigned long offset, unsigned long size)
+static void parse_file(const char *name)
 {
-	if (nr_addr_ranges >= MAX_ADDR_RANGES)
-		fatal("too much addr ranges\n");
-
-	opt_offset[nr_addr_ranges] = offset;
-	opt_size[nr_addr_ranges] = size;
-	nr_addr_ranges++;
 }
 
 static void parse_addr_range(const char *optarg)
@@ -630,6 +894,8 @@ static struct option opts[] = {
 	{ "list"      , 0, NULL, 'l' },
 	{ "list-each" , 0, NULL, 'L' },
 	{ "no-summary", 0, NULL, 'N' },
+	{ "hwpoison"  , 0, NULL, 'X' },
+	{ "unpoison"  , 0, NULL, 'x' },
 	{ "help"      , 0, NULL, 'h' },
 	{ NULL        , 0, NULL, 0 }
 };
@@ -641,7 +907,7 @@ int main(int argc, char *argv[])
 	page_size = getpagesize();
 
 	while ((c = getopt_long(argc, argv,
-				"rp:f:a:b:lLNh", opts, NULL)) != -1) {
+				"rp:f:a:b:lLNXxh", opts, NULL)) != -1) {
 		switch (c) {
 		case 'r':
 			opt_raw = 1;
@@ -667,6 +933,14 @@ int main(int argc, char *argv[])
 		case 'N':
 			opt_no_summary = 1;
 			break;
+		case 'X':
+			opt_hwpoison = 1;
+			prepare_hwpoison_fd();
+			break;
+		case 'x':
+			opt_unpoison = 1;
+			prepare_hwpoison_fd();
+			break;
 		case 'h':
 			usage();
 			exit(0);
@@ -676,15 +950,17 @@ int main(int argc, char *argv[])
 		}
 	}
 
+	if (opt_list && opt_pid)
+		printf("voffset\t");
 	if (opt_list == 1)
-		printf("offset\tcount\tflags\n");
+		printf("offset\tlen\tflags\n");
 	if (opt_list == 2)
 		printf("offset\tflags\n");
 
 	walk_addr_ranges();
 
 	if (opt_list == 1)
-		show_page_range(0, 0);  /* drain the buffer */
+		show_page_range(0, 0, 0);  /* drain the buffer */
 
 	if (opt_no_summary)
 		return 0;

Documentation/vm/pagemap.txt

@@ -57,7 +57,9 @@ There are three components to pagemap:
     16. COMPOUND_TAIL
     16. HUGE
     18. UNEVICTABLE
+    19. HWPOISON
     20. NOPAGE
+    21. KSM
 
 Short descriptions to the page flags:
 
@@ -86,9 +88,15 @@ Short descriptions to the page flags:
 17. HUGE
     this is an integral part of a HugeTLB page
 
+19. HWPOISON
+    hardware detected memory corruption on this page: don't touch the data!
+
 20. NOPAGE
     no page frame exists at the requested address
 
+21. KSM
+    identical memory pages dynamically shared between one or more processes
+
     [IO related page flags]
  1. ERROR     IO error occurred
  3. UPTODATE  page has up-to-date data

Documentation/w1/masters/ds2482

@@ -24,8 +24,8 @@ General Remarks
 
 Valid addresses are 0x18, 0x19, 0x1a, and 0x1b.
 However, the device cannot be detected without writing to the i2c bus, so no
-detection is done.
-You should force the device address.
+detection is done. You should instantiate the device explicitly.
 
-$ modprobe ds2482 force=0,0x18
+$ modprobe ds2482
+$ echo ds2482 0x18 > /sys/bus/i2c/devices/i2c-0/new_device
 

MAINTAINERS

@@ -257,11 +257,12 @@ W:	http://www.lesswatts.org/projects/acpi/
 S:	Supported
 F:	drivers/acpi/fan.c
 
-ACPI PCI HOTPLUG DRIVER
-M:	Kristen Carlson Accardi <kristen.c.accardi@intel.com>
-L:	linux-pci@vger.kernel.org
+ACPI PROCESSOR AGGREGATOR DRIVER
+M:	Shaohua Li <shaohua.li@intel.com>
+L:	linux-acpi@vger.kernel.org
+W:	http://www.lesswatts.org/projects/acpi/
 S:	Supported
-F:	drivers/pci/hotplug/acpi*
+F:	drivers/acpi/acpi_pad.c
 
 ACPI THERMAL DRIVER
 M:	Zhang Rui <rui.zhang@intel.com>
@@ -576,6 +577,11 @@ M:	Mike Rapoport <mike@compulab.co.il>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 
+ARM/CONTEC MICRO9 MACHINE SUPPORT
+M:	Hubert Feurstein <hubert.feurstein@contec.at>
+S:	Maintained
+F:	arch/arm/mach-ep93xx/micro9.c
+
 ARM/CORGI MACHINE SUPPORT
 M:	Richard Purdie <rpurdie@rpsys.net>
 S:	Maintained
@@ -652,24 +658,24 @@ ARM/INTEL IOP32X ARM ARCHITECTURE
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 M:	Dan Williams <dan.j.williams@intel.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Supported
+S:	Maintained
 
 ARM/INTEL IOP33X ARM ARCHITECTURE
 M:	Dan Williams <dan.j.williams@intel.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Supported
+S:	Maintained
 
 ARM/INTEL IOP13XX ARM ARCHITECTURE
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 M:	Dan Williams <dan.j.williams@intel.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Supported
+S:	Maintained
 
 ARM/INTEL IQ81342EX MACHINE SUPPORT
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 M:	Dan Williams <dan.j.williams@intel.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Supported
+S:	Maintained
 
 ARM/INTEL IXP2000 ARM ARCHITECTURE
 M:	Lennert Buytenhek <kernel@wantstofly.org>
@@ -689,7 +695,7 @@ S:	Maintained
 ARM/INTEL IXP4XX ARM ARCHITECTURE
 M:	Imre Kaloz <kaloz@openwrt.org>
 M:	Krzysztof Halasa <khc@pm.waw.pl>
-L:	linux-arm-kernel@lists.infradead.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-ixp4xx/
 
@@ -697,7 +703,7 @@ ARM/INTEL XSC3 (MANZANO) ARM CORE
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 M:	Dan Williams <dan.j.williams@intel.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Supported
+S:	Maintained
 
 ARM/IP FABRICS DOUBLE ESPRESSO MACHINE SUPPORT
 M:	Lennert Buytenhek <kernel@wantstofly.org>
@@ -746,20 +752,37 @@ M:	Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
 M:	Dirk Opfer <dirk@opfer-online.de>
 S:	Maintained
 
-ARM/PALMTX,PALMT5,PALMLD,PALMTE2 SUPPORT
+ARM/PALMTX,PALMT5,PALMLD,PALMTE2,PALMTC SUPPORT
 M:	Marek Vasut <marek.vasut@gmail.com>
+L:	linux-arm-kernel@lists.infradead.org
 W:	http://hackndev.com
 S:	Maintained
+F:	arch/arm/mach-pxa/include/mach/palmtx.h
+F:	arch/arm/mach-pxa/palmtx.c
+F:	arch/arm/mach-pxa/include/mach/palmt5.h
+F:	arch/arm/mach-pxa/palmt5.c
+F:	arch/arm/mach-pxa/include/mach/palmld.h
+F:	arch/arm/mach-pxa/palmld.c
+F:	arch/arm/mach-pxa/include/mach/palmte2.h
+F:	arch/arm/mach-pxa/palmte2.c
+F:	arch/arm/mach-pxa/include/mach/palmtc.h
+F:	arch/arm/mach-pxa/palmtc.c
 
 ARM/PALM TREO 680 SUPPORT
 M:	Tomas Cech <sleep_walker@suse.cz>
+L:	linux-arm-kernel@lists.infradead.org
 W:	http://hackndev.com
 S:	Maintained
+F:	arch/arm/mach-pxa/include/mach/treo680.h
+F:	arch/arm/mach-pxa/treo680.c
 
 ARM/PALMZ72 SUPPORT
 M:	Sergey Lapin <slapin@ossfans.org>
+L:	linux-arm-kernel@lists.infradead.org
 W:	http://hackndev.com
 S:	Maintained
+F:	arch/arm/mach-pxa/include/mach/palmz72.h
+F:	arch/arm/mach-pxa/palmz72.c
 
 ARM/PLEB SUPPORT
 M:	Peter Chubb <pleb@gelato.unsw.edu.au>
@@ -1213,6 +1236,13 @@ L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/tg3.*
 
+BROCADE BFA FC SCSI DRIVER
+P:      Jing Huang
+M:      huangj@brocade.com
+L:      linux-scsi@vger.kernel.org
+S:      Supported
+F:      drivers/scsi/bfa/
+
 BSG (block layer generic sg v4 driver)
 M:	FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
 L:	linux-scsi@vger.kernel.org
@@ -2040,7 +2070,7 @@ S:	Maintained
 F:	fs/*
 
 FINTEK F75375S HARDWARE MONITOR AND FAN CONTROLLER DRIVER
-M:	Riku Voipio <riku.vipio@iki.fi>
+M:	Riku Voipio <riku.voipio@iki.fi>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	drivers/hwmon/f75375s.c
@@ -2331,7 +2361,9 @@ S:	Orphan
 F:	drivers/hwmon/
 
 HARDWARE RANDOM NUMBER GENERATOR CORE
-S:	Orphan
+M:	Matt Mackall <mpm@selenic.com>
+M:	Herbert Xu <herbert@gondor.apana.org.au>
+S:	Odd fixes
 F:	Documentation/hw_random.txt
 F:	drivers/char/hw_random/
 F:	include/linux/hw_random.h
@@ -2583,6 +2615,7 @@ L:	linux1394-devel@lists.sourceforge.net
 W:	http://www.linux1394.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git
 S:	Maintained
+F:	Documentation/debugging-via-ohci1394.txt
 F:	drivers/ieee1394/
 
 IEEE 1394 RAW I/O DRIVER
@@ -2682,7 +2715,7 @@ F:	include/linux/intel-iommu.h
 
 INTEL IOP-ADMA DMA DRIVER
 M:	Dan Williams <dan.j.williams@intel.com>
-S:	Supported
+S:	Maintained
 F:	drivers/dma/iop-adma.c
 
 INTEL IXP4XX QMGR, NPE, ETHERNET and HSS SUPPORT
@@ -3623,10 +3656,18 @@ F:	Documentation/blockdev/nbd.txt
 F:	drivers/block/nbd.c
 F:	include/linux/nbd.h
 
+NETWORK DROP MONITOR
+M:	Neil Horman <nhorman@tuxdriver.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+W:	https://fedorahosted.org/dropwatch/
+F:	net/core/drop_monitor.c
+
 NETWORKING [GENERAL]
 M:	"David S. Miller" <davem@davemloft.net>
 L:	netdev@vger.kernel.org
 W:	http://www.linuxfoundation.org/en/Net
+W:	http://patchwork.ozlabs.org/project/netdev/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
 S:	Maintained
 F:	net/
@@ -3953,6 +3994,7 @@ F:	drivers/block/paride/
 PARISC ARCHITECTURE
 M:	Kyle McMartin <kyle@mcmartin.ca>
 M:	Helge Deller <deller@gmx.de>
+M:	"James E.J. Bottomley" <jejb@parisc-linux.org>
 L:	linux-parisc@vger.kernel.org
 W:	http://www.parisc-linux.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6.git
@@ -4003,11 +4045,11 @@ F:	Documentation/PCI/
 F:	drivers/pci/
 F:	include/linux/pci*
 
-PCIE HOTPLUG DRIVER
-M:	Kristen Carlson Accardi <kristen.c.accardi@intel.com>
+PCI HOTPLUG
+M:	Jesse Barnes <jbarnes@virtuousgeek.org>
 L:	linux-pci@vger.kernel.org
 S:	Supported
-F:	drivers/pci/pcie/
+F:	drivers/pci/hotplug
 
 PCMCIA SUBSYSTEM
 P:	Linux PCMCIA Team
@@ -4036,6 +4078,13 @@ M:	Peter Zijlstra <a.p.zijlstra@chello.nl>
 M:	Paul Mackerras <paulus@samba.org>
 M:	Ingo Molnar <mingo@elte.hu>
 S:	Supported
+F:	kernel/perf_event.c
+F:	include/linux/perf_event.h
+F:	arch/*/*/kernel/perf_event.c
+F:	arch/*/include/asm/perf_event.h
+F:	arch/*/lib/perf_event.c
+F:	arch/*/kernel/perf_callchain.c
+F:	tools/perf/
 
 PERSONALITY HANDLING
 M:	Christoph Hellwig <hch@infradead.org>
@@ -4618,6 +4667,14 @@ F:	drivers/ata/
 F:	include/linux/ata.h
 F:	include/linux/libata.h
 
+SERVER ENGINES 10Gbps iSCSI - BladeEngine 2 DRIVER
+P:     Jayamohan Kallickal
+M:     jayamohank@serverengines.com
+L:     linux-scsi@vger.kernel.org
+W:     http://www.serverengines.com
+S:     Supported
+F:     drivers/scsi/be2iscsi/
+
 SERVER ENGINES 10Gbps NIC - BladeEngine 2 DRIVER
 M:	Sathya Perla <sathyap@serverengines.com>
 M:	Subbu Seetharaman <subbus@serverengines.com>
@@ -4670,12 +4727,6 @@ F:	drivers/serial/serial_lh7a40x.c
 F:	drivers/usb/gadget/lh7a40*
 F:	drivers/usb/host/ohci-lh7a40*
 
-SHPC HOTPLUG DRIVER
-M:	Kristen Carlson Accardi <kristen.c.accardi@intel.com>
-L:	linux-pci@vger.kernel.org
-S:	Supported
-F:	drivers/pci/hotplug/shpchp*
-
 SIMPLE FIRMWARE INTERFACE (SFI)
 P:	Len Brown
 M:	lenb@kernel.org
@@ -4687,7 +4738,6 @@ F:	arch/x86/kernel/*sfi*
 F:	drivers/sfi/
 F:	include/linux/sfi*.h
 
-
 SIMTEC EB110ATX (Chalice CATS)
 P:	Ben Dooks
 M:	Vincent Sanders <support@simtec.co.uk>
@@ -5615,6 +5665,13 @@ S:	Maintained
 F:	drivers/vlynq/vlynq.c
 F:	include/linux/vlynq.h
 
+VMWARE VMXNET3 ETHERNET DRIVER
+M:     Shreyas Bhatewara <sbhatewara@vmware.com>
+M:     VMware, Inc. <pv-drivers@vmware.com>
+L:     netdev@vger.kernel.org
+S:     Maintained
+F:     drivers/net/vmxnet3/
+
 VOLTAGE AND CURRENT REGULATOR FRAMEWORK
 M:	Liam Girdwood <lrg@slimlogic.co.uk>
 M:	Mark Brown <broonie@opensource.wolfsonmicro.com>

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
-SUBLEVEL = 31
-EXTRAVERSION =
+SUBLEVEL = 32
+EXTRAVERSION = -rc5
 NAME = Man-Eating Seals of Antiquity
 
 # *DOCUMENTATION*
@@ -315,6 +315,7 @@ OBJCOPY		= $(CROSS_COMPILE)objcopy
 OBJDUMP		= $(CROSS_COMPILE)objdump
 AWK		= awk
 GENKSYMS	= scripts/genksyms/genksyms
+INSTALLKERNEL  := installkernel
 DEPMOD		= /sbin/depmod
 KALLSYMS	= scripts/kallsyms
 PERL		= perl
@@ -353,7 +354,8 @@ KERNELVERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
 
 export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
 export ARCH SRCARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC
-export CPP AR NM STRIP OBJCOPY OBJDUMP MAKE AWK GENKSYMS PERL UTS_MACHINE
+export CPP AR NM STRIP OBJCOPY OBJDUMP
+export MAKE AWK GENKSYMS INSTALLKERNEL PERL UTS_MACHINE
 export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
 
 export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS
@@ -571,6 +573,9 @@ KBUILD_CFLAGS	+= $(call cc-option,-fno-strict-overflow)
 # revert to pre-gcc-4.4 behaviour of .eh_frame
 KBUILD_CFLAGS	+= $(call cc-option,-fno-dwarf2-cfi-asm)
 
+# conserve stack if available
+KBUILD_CFLAGS   += $(call cc-option,-fconserve-stack)
+
 # Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
 # But warn user when we do so
 warn-assign = \
@@ -591,12 +596,12 @@ endif
 
 # Use --build-id when available.
 LDFLAGS_BUILD_ID = $(patsubst -Wl$(comma)%,%,\
-			      $(call ld-option, -Wl$(comma)--build-id,))
+			      $(call cc-ldoption, -Wl$(comma)--build-id,))
 LDFLAGS_MODULE += $(LDFLAGS_BUILD_ID)
 LDFLAGS_vmlinux += $(LDFLAGS_BUILD_ID)
 
 ifeq ($(CONFIG_STRIP_ASM_SYMS),y)
-LDFLAGS_vmlinux	+= -X
+LDFLAGS_vmlinux	+= $(call ld-option, -X,)
 endif
 
 # Default kernel image to build when no specific target is given.
@@ -980,11 +985,6 @@ prepare0: archprepare FORCE
 # All the preparing..
 prepare: prepare0
 
-# Leave this as default for preprocessing vmlinux.lds.S, which is now
-# done in arch/$(ARCH)/kernel/Makefile
-
-export CPPFLAGS_vmlinux.lds += -P -C -U$(ARCH)
-
 # The asm symlink changes when $(ARCH) changes.
 # Detect this and ask user to run make mrproper
 # If asm is a stale symlink (point to dir that does not exist) remove it

arch/alpha/include/asm/fcntl.h

@@ -26,6 +26,8 @@
 #define F_GETOWN	6	/*  for sockets. */
 #define F_SETSIG	10	/*  for sockets. */
 #define F_GETSIG	11	/*  for sockets. */
+#define F_SETOWN_EX	12
+#define F_GETOWN_EX	13
 
 /* for posix fcntl() and lockf() */
 #define F_RDLCK		1

arch/alpha/include/asm/smp.h

@@ -47,7 +47,7 @@ extern struct cpuinfo_alpha cpu_data[NR_CPUS];
 extern int smp_num_cpus;
 
 extern void arch_send_call_function_single_ipi(int cpu);
-extern void arch_send_call_function_ipi(cpumask_t mask);
+extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
 
 #else /* CONFIG_SMP */
 

arch/alpha/include/asm/topology.h

@@ -22,23 +22,6 @@ static inline int cpu_to_node(int cpu)
 	return node;
 }
 
-static inline cpumask_t node_to_cpumask(int node)
-{
-	cpumask_t node_cpu_mask = CPU_MASK_NONE;
-	int cpu;
-
-	for_each_online_cpu(cpu) {
-		if (cpu_to_node(cpu) == node)
-			cpu_set(cpu, node_cpu_mask);
-	}
-
-#ifdef DEBUG_NUMA
-	printk("node %d: cpu_mask: %016lx\n", node, node_cpu_mask);
-#endif
-
-	return node_cpu_mask;
-}
-
 extern struct cpumask node_to_cpumask_map[];
 /* FIXME: This is dumb, recalculating every time.  But simple. */
 static const struct cpumask *cpumask_of_node(int node)
@@ -55,7 +38,6 @@ static const struct cpumask *cpumask_of_node(int node)
 	return &node_to_cpumask_map[node];
 }
 
-#define pcibus_to_cpumask(bus)	(cpu_online_map)
 #define cpumask_of_pcibus(bus)	(cpu_online_mask)
 
 #endif /* !CONFIG_NUMA */

arch/alpha/kernel/core_marvel.c

@@ -1016,7 +1016,7 @@ marvel_agp_bind_memory(alpha_agp_info *agp, off_t pg_start, struct agp_memory *m
 {
 	struct marvel_agp_aperture *aper = agp->aperture.sysdata;
 	return iommu_bind(aper->arena, aper->pg_start + pg_start, 
-			  mem->page_count, mem->memory);
+			  mem->page_count, mem->pages);
 }
 
 static int 

arch/alpha/kernel/core_titan.c

@@ -680,7 +680,7 @@ titan_agp_bind_memory(alpha_agp_info *agp, off_t pg_start, struct agp_memory *me
 {
 	struct titan_agp_aperture *aper = agp->aperture.sysdata;
 	return iommu_bind(aper->arena, aper->pg_start + pg_start, 
-			  mem->page_count, mem->memory);
+			  mem->page_count, mem->pages);
 }
 
 static int 

arch/alpha/kernel/init_task.c

@@ -13,6 +13,5 @@ static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
 struct task_struct init_task = INIT_TASK(init_task);
 EXPORT_SYMBOL(init_task);
 
-union thread_union init_thread_union
-	__attribute__((section(".data.init_thread")))
-	= { INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+	{ INIT_THREAD_INFO(init_task) };

arch/alpha/kernel/pci_impl.h

@@ -198,7 +198,7 @@ extern unsigned long size_for_memory(unsigned long max);
 
 extern int iommu_reserve(struct pci_iommu_arena *, long, long);
 extern int iommu_release(struct pci_iommu_arena *, long, long);
-extern int iommu_bind(struct pci_iommu_arena *, long, long, unsigned long *);
+extern int iommu_bind(struct pci_iommu_arena *, long, long, struct page **);
 extern int iommu_unbind(struct pci_iommu_arena *, long, long);
 
 

arch/alpha/kernel/pci_iommu.c

@@ -876,7 +876,7 @@ iommu_release(struct pci_iommu_arena *arena, long pg_start, long pg_count)
 
 int
 iommu_bind(struct pci_iommu_arena *arena, long pg_start, long pg_count, 
-	   unsigned long *physaddrs)
+	   struct page **pages)
 {
 	unsigned long flags;
 	unsigned long *ptes;
@@ -896,7 +896,7 @@ iommu_bind(struct pci_iommu_arena *arena, long pg_start, long pg_count,
 	}
 		
 	for(i = 0, j = pg_start; i < pg_count; i++, j++)
-		ptes[j] = mk_iommu_pte(physaddrs[i]);
+		ptes[j] = mk_iommu_pte(page_to_phys(pages[i]));
 
 	spin_unlock_irqrestore(&arena->lock, flags);
 

arch/alpha/kernel/process.c

@@ -19,7 +19,6 @@
 #include <linux/ptrace.h>
 #include <linux/slab.h>
 #include <linux/user.h>
-#include <linux/utsname.h>
 #include <linux/time.h>
 #include <linux/major.h>
 #include <linux/stat.h>

arch/alpha/kernel/smp.c

@@ -548,16 +548,16 @@ setup_profiling_timer(unsigned int multiplier)
 
 
 static void
-send_ipi_message(cpumask_t to_whom, enum ipi_message_type operation)
+send_ipi_message(const struct cpumask *to_whom, enum ipi_message_type operation)
 {
 	int i;
 
 	mb();
-	for_each_cpu_mask(i, to_whom)
+	for_each_cpu(i, to_whom)
 		set_bit(operation, &ipi_data[i].bits);
 
 	mb();
-	for_each_cpu_mask(i, to_whom)
+	for_each_cpu(i, to_whom)
 		wripir(i);
 }
 
@@ -624,7 +624,7 @@ smp_send_reschedule(int cpu)
 		printk(KERN_WARNING
 		       "smp_send_reschedule: Sending IPI to self.\n");
 #endif
-	send_ipi_message(cpumask_of_cpu(cpu), IPI_RESCHEDULE);
+	send_ipi_message(cpumask_of(cpu), IPI_RESCHEDULE);
 }
 
 void
@@ -636,17 +636,17 @@ smp_send_stop(void)
 	if (hard_smp_processor_id() != boot_cpu_id)
 		printk(KERN_WARNING "smp_send_stop: Not on boot cpu.\n");
 #endif
-	send_ipi_message(to_whom, IPI_CPU_STOP);
+	send_ipi_message(&to_whom, IPI_CPU_STOP);
 }
 
-void arch_send_call_function_ipi(cpumask_t mask)
+void arch_send_call_function_ipi_mask(const struct cpumask *mask)
 {
 	send_ipi_message(mask, IPI_CALL_FUNC);
 }
 
 void arch_send_call_function_single_ipi(int cpu)
 {
-	send_ipi_message(cpumask_of_cpu(cpu), IPI_CALL_FUNC_SINGLE);
+	send_ipi_message(cpumask_of(cpu), IPI_CALL_FUNC_SINGLE);
 }
 
 static void

arch/alpha/kernel/vmlinux.lds.S

@@ -1,4 +1,5 @@
 #include <asm-generic/vmlinux.lds.h>
+#include <asm/thread_info.h>
 #include <asm/page.h>
 
 OUTPUT_FORMAT("elf64-alpha")
@@ -31,88 +32,21 @@ SECTIONS
 	} :kernel
 
 	RODATA
-
-	/* Exception table */
-	. = ALIGN(16);
-	__ex_table : {
-		__start___ex_table = .;
-		*(__ex_table)
-		__stop___ex_table = .;
-	}
+	EXCEPTION_TABLE(16)
 
 	/* Will be freed after init */
-	. = ALIGN(PAGE_SIZE);
-	/* Init code and data */
-	__init_begin = .;
-	.init.text : {
-		_sinittext = .;
-		INIT_TEXT
-		_einittext = .;
-	}
-	.init.data : {
-		INIT_DATA
-	}
-
-	. = ALIGN(16);
-	.init.setup : {
-		__setup_start = .;
-		*(.init.setup)
-		__setup_end = .;
-	}
-
-	. = ALIGN(8);
-	.initcall.init : {
-		__initcall_start = .;
-		INITCALLS
-		__initcall_end = .;
-	}
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	. = ALIGN(PAGE_SIZE);
-	.init.ramfs : {
-		__initramfs_start = .;
-		*(.init.ramfs)
-		__initramfs_end = .;
-	}
-#endif
-
-	. = ALIGN(8);
-	.con_initcall.init : {
-		__con_initcall_start = .;
-		*(.con_initcall.init)
-		__con_initcall_end = .;
-	}
-
-	. = ALIGN(8);
-	SECURITY_INIT
-
+	__init_begin = ALIGN(PAGE_SIZE);
+	INIT_TEXT_SECTION(PAGE_SIZE)
+	INIT_DATA_SECTION(16)
 	PERCPU(PAGE_SIZE)
-
-	. = ALIGN(2 * PAGE_SIZE);
+	/* Align to THREAD_SIZE rather than PAGE_SIZE here so any padding page
+	   needed for the THREAD_SIZE aligned init_task gets freed after init */
+	. = ALIGN(THREAD_SIZE);
 	__init_end = .;
 	/* Freed after init ends here */
 
-	/* Note 2 page alignment above.  */
-	.data.init_thread : {
-		*(.data.init_thread)
-	}
-
-	. = ALIGN(PAGE_SIZE);
-	.data.page_aligned : {
-		*(.data.page_aligned)
-	}
-
-	. = ALIGN(64);
-	.data.cacheline_aligned : {
-		*(.data.cacheline_aligned)
-	}
-
 	_data = .;
-	/* Data */
-	.data : {
-		DATA_DATA
-		CONSTRUCTORS
-	}
+	RW_DATA_SECTION(64, PAGE_SIZE, THREAD_SIZE)
 
 	.got : {
 		*(.got)
@@ -122,16 +56,7 @@ SECTIONS
 	}
 	_edata = .;	/* End of data section */
 
-	__bss_start = .;
-	.sbss : {
-		*(.sbss)
-		*(.scommon)
-	}
-	.bss : {
-		*(.bss)
-		*(COMMON)
-	}
-	__bss_stop = .;
+	BSS_SECTION(0, 0, 0)
 	_end = .;
 
 	.mdebug 0 : {

arch/arm/Kconfig

@@ -46,6 +46,10 @@ config GENERIC_CLOCKEVENTS_BROADCAST
 	depends on GENERIC_CLOCKEVENTS
 	default y if SMP && !LOCAL_TIMERS
 
+config HAVE_TCM
+	bool
+	select GENERIC_ALLOCATOR
+
 config NO_IOPORT
 	bool
 
@@ -649,6 +653,7 @@ config ARCH_U300
 	bool "ST-Ericsson U300 Series"
 	depends on MMU
 	select CPU_ARM926T
+	select HAVE_TCM
 	select ARM_AMBA
 	select ARM_VIC
 	select GENERIC_TIME

arch/arm/Makefile

@@ -14,7 +14,7 @@ LDFLAGS_vmlinux	:=-p --no-undefined -X
 ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
 LDFLAGS_vmlinux	+= --be8
 endif
-CPPFLAGS_vmlinux.lds = -DTEXT_OFFSET=$(TEXT_OFFSET)
+
 OBJCOPYFLAGS	:=-O binary -R .note -R .note.gnu.build-id -R .comment -S
 GZFLAGS		:=-9
 #KBUILD_CFLAGS	+=-pipe
@@ -279,7 +279,7 @@ define archhelp
   echo  '                  (supply initrd image via make variable INITRD=<path>)'
   echo  '  install       - Install uncompressed kernel'
   echo  '  zinstall      - Install compressed kernel'
-  echo  '                  Install using (your) ~/bin/installkernel or'
-  echo  '                  (distribution) /sbin/installkernel or'
+  echo  '                  Install using (your) ~/bin/$(INSTALLKERNEL) or'
+  echo  '                  (distribution) /sbin/$(INSTALLKERNEL) or'
   echo  '                  install to $$(INSTALL_PATH) and run lilo'
 endef

arch/arm/boot/install.sh

@@ -21,8 +21,8 @@
 #
 
 # User may have a custom install script
-if [ -x ~/bin/${CROSS_COMPILE}installkernel ]; then exec ~/bin/${CROSS_COMPILE}installkernel "$@"; fi
-if [ -x /sbin/${CROSS_COMPILE}installkernel ]; then exec /sbin/${CROSS_COMPILE}installkernel "$@"; fi
+if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
+if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
 
 if [ "$(basename $2)" = "zImage" ]; then
 # Compressed install

arch/arm/common/locomo.c

@@ -865,6 +865,7 @@ void locomo_gpio_set_dir(struct device *dev, unsigned int bits, unsigned int dir
 
 	spin_unlock_irqrestore(&lchip->lock, flags);
 }
+EXPORT_SYMBOL(locomo_gpio_set_dir);
 
 int locomo_gpio_read_level(struct device *dev, unsigned int bits)
 {
@@ -882,6 +883,7 @@ int locomo_gpio_read_level(struct device *dev, unsigned int bits)
 	ret &= bits;
 	return ret;
 }
+EXPORT_SYMBOL(locomo_gpio_read_level);
 
 int locomo_gpio_read_output(struct device *dev, unsigned int bits)
 {
@@ -899,6 +901,7 @@ int locomo_gpio_read_output(struct device *dev, unsigned int bits)
 	ret &= bits;
 	return ret;
 }
+EXPORT_SYMBOL(locomo_gpio_read_output);
 
 void locomo_gpio_write(struct device *dev, unsigned int bits, unsigned int set)
 {
@@ -920,6 +923,7 @@ void locomo_gpio_write(struct device *dev, unsigned int bits, unsigned int set)
 
 	spin_unlock_irqrestore(&lchip->lock, flags);
 }
+EXPORT_SYMBOL(locomo_gpio_write);
 
 static void locomo_m62332_sendbit(void *mapbase, int bit)
 {
@@ -1084,13 +1088,12 @@ void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int
 
 	spin_unlock_irqrestore(&lchip->lock, flags);
 }
+EXPORT_SYMBOL(locomo_m62332_senddata);
 
 /*
  *	Frontlight control
  */
 
-static struct locomo *locomo_chip_driver(struct locomo_dev *ldev);
-
 void locomo_frontlight_set(struct locomo_dev *dev, int duty, int vr, int bpwf)
 {
 	unsigned long flags;
@@ -1182,11 +1185,13 @@ int locomo_driver_register(struct locomo_driver *driver)
 	driver->drv.bus = &locomo_bus_type;
 	return driver_register(&driver->drv);
 }
+EXPORT_SYMBOL(locomo_driver_register);
 
 void locomo_driver_unregister(struct locomo_driver *driver)
 {
 	driver_unregister(&driver->drv);
 }
+EXPORT_SYMBOL(locomo_driver_unregister);
 
 static int __init locomo_init(void)
 {
@@ -1208,11 +1213,3 @@ module_exit(locomo_exit);
 MODULE_DESCRIPTION("Sharp LoCoMo core driver");
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("John Lenz <lenz@cs.wisc.edu>");
-
-EXPORT_SYMBOL(locomo_driver_register);
-EXPORT_SYMBOL(locomo_driver_unregister);
-EXPORT_SYMBOL(locomo_gpio_set_dir);
-EXPORT_SYMBOL(locomo_gpio_read_level);
-EXPORT_SYMBOL(locomo_gpio_read_output);
-EXPORT_SYMBOL(locomo_gpio_write);
-EXPORT_SYMBOL(locomo_m62332_senddata);

arch/arm/common/sa1111.c

@@ -1032,6 +1032,7 @@ unsigned int sa1111_pll_clock(struct sa1111_dev *sadev)
 
 	return __sa1111_pll_clock(sachip);
 }
+EXPORT_SYMBOL(sa1111_pll_clock);
 
 /**
  *	sa1111_select_audio_mode - select I2S or AC link mode
@@ -1059,6 +1060,7 @@ void sa1111_select_audio_mode(struct sa1111_dev *sadev, int mode)
 
 	spin_unlock_irqrestore(&sachip->lock, flags);
 }
+EXPORT_SYMBOL(sa1111_select_audio_mode);
 
 /**
  *	sa1111_set_audio_rate - set the audio sample rate
@@ -1083,6 +1085,7 @@ int sa1111_set_audio_rate(struct sa1111_dev *sadev, int rate)
 
 	return 0;
 }
+EXPORT_SYMBOL(sa1111_set_audio_rate);
 
 /**
  *	sa1111_get_audio_rate - get the audio sample rate
@@ -1100,6 +1103,7 @@ int sa1111_get_audio_rate(struct sa1111_dev *sadev)
 
 	return __sa1111_pll_clock(sachip) / (256 * div);
 }
+EXPORT_SYMBOL(sa1111_get_audio_rate);
 
 void sa1111_set_io_dir(struct sa1111_dev *sadev,
 		       unsigned int bits, unsigned int dir,
@@ -1128,6 +1132,7 @@ void sa1111_set_io_dir(struct sa1111_dev *sadev,
 	MODIFY_BITS(gpio + SA1111_GPIO_PCSDR, (bits >> 16) & 255, sleep_dir >> 16);
 	spin_unlock_irqrestore(&sachip->lock, flags);
 }
+EXPORT_SYMBOL(sa1111_set_io_dir);
 
 void sa1111_set_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v)
 {
@@ -1142,6 +1147,7 @@ void sa1111_set_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v)
 	MODIFY_BITS(gpio + SA1111_GPIO_PCDWR, (bits >> 16) & 255, v >> 16);
 	spin_unlock_irqrestore(&sachip->lock, flags);
 }
+EXPORT_SYMBOL(sa1111_set_io);
 
 void sa1111_set_sleep_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v)
 {
@@ -1156,6 +1162,7 @@ void sa1111_set_sleep_io(struct sa1111_dev *sadev, unsigned int bits, unsigned i
 	MODIFY_BITS(gpio + SA1111_GPIO_PCSSR, (bits >> 16) & 255, v >> 16);
 	spin_unlock_irqrestore(&sachip->lock, flags);
 }
+EXPORT_SYMBOL(sa1111_set_sleep_io);
 
 /*
  * Individual device operations.
@@ -1176,6 +1183,7 @@ void sa1111_enable_device(struct sa1111_dev *sadev)
 	sa1111_writel(val | sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
 	spin_unlock_irqrestore(&sachip->lock, flags);
 }
+EXPORT_SYMBOL(sa1111_enable_device);
 
 /**
  *	sa1111_disable_device - disable an on-chip SA1111 function block
@@ -1192,6 +1200,7 @@ void sa1111_disable_device(struct sa1111_dev *sadev)
 	sa1111_writel(val & ~sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
 	spin_unlock_irqrestore(&sachip->lock, flags);
 }
+EXPORT_SYMBOL(sa1111_disable_device);
 
 /*
  *	SA1111 "Register Access Bus."
@@ -1259,17 +1268,20 @@ struct bus_type sa1111_bus_type = {
 	.suspend	= sa1111_bus_suspend,
 	.resume		= sa1111_bus_resume,
 };
+EXPORT_SYMBOL(sa1111_bus_type);
 
 int sa1111_driver_register(struct sa1111_driver *driver)
 {
 	driver->drv.bus = &sa1111_bus_type;
 	return driver_register(&driver->drv);
 }
+EXPORT_SYMBOL(sa1111_driver_register);
 
 void sa1111_driver_unregister(struct sa1111_driver *driver)
 {
 	driver_unregister(&driver->drv);
 }
+EXPORT_SYMBOL(sa1111_driver_unregister);
 
 static int __init sa1111_init(void)
 {
@@ -1290,16 +1302,3 @@ module_exit(sa1111_exit);
 
 MODULE_DESCRIPTION("Intel Corporation SA1111 core driver");
 MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(sa1111_select_audio_mode);
-EXPORT_SYMBOL(sa1111_set_audio_rate);
-EXPORT_SYMBOL(sa1111_get_audio_rate);
-EXPORT_SYMBOL(sa1111_set_io_dir);
-EXPORT_SYMBOL(sa1111_set_io);
-EXPORT_SYMBOL(sa1111_set_sleep_io);
-EXPORT_SYMBOL(sa1111_enable_device);
-EXPORT_SYMBOL(sa1111_disable_device);
-EXPORT_SYMBOL(sa1111_pll_clock);
-EXPORT_SYMBOL(sa1111_bus_type);
-EXPORT_SYMBOL(sa1111_driver_register);
-EXPORT_SYMBOL(sa1111_driver_unregister);

arch/arm/common/vic.c

@@ -22,6 +22,7 @@
 #include <linux/list.h>
 #include <linux/io.h>
 #include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/amba/bus.h>
 
 #include <asm/mach/irq.h>

arch/arm/configs/h3600_defconfig

@@ -90,7 +90,6 @@ CONFIG_ARCH_SA1100=y
 # CONFIG_SA1100_COLLIE is not set
 # CONFIG_SA1100_H3100 is not set
 CONFIG_SA1100_H3600=y
-CONFIG_SA1100_H3XXX=y
 # CONFIG_SA1100_BADGE4 is not set
 # CONFIG_SA1100_JORNADA720 is not set
 # CONFIG_SA1100_HACKKIT is not set

arch/arm/configs/littleton_defconfig

@@ -1,783 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc5
-# Fri Dec 21 11:06:19 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-
-#
-# Supported PXA3xx Processor Variants
-#
-CONFIG_CPU_PXA300=y
-CONFIG_CPU_PXA310=y
-# CONFIG_CPU_PXA320 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_ZYLONITE is not set
-CONFIG_MACH_LITTLETON=y
-# CONFIG_MACH_ARMCORE is not set
-CONFIG_PXA3xx=y
-CONFIG_PXA_SSP=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSC3=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_IO_36=y
-
-#
-# Processor Features
-#
-# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_PREEMPT=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS2,38400 mem=64M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y

arch/arm/configs/omap3_beagle_defconfig

@@ -969,7 +969,6 @@ CONFIG_USB_ETH_RNDIS=y
 #
 CONFIG_USB_OTG_UTILS=y
 # CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
 CONFIG_TWL4030_USB=y
 # CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y

arch/arm/configs/pxa3xx_defconfig

@@ -0,0 +1,1332 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc1
+# Mon Jul 13 22:48:49 2009
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+# CONFIG_CLASSIC_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+# CONFIG_MODULE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+
+#
+# Supported PXA3xx Processor Variants
+#
+CONFIG_CPU_PXA300=y
+CONFIG_CPU_PXA310=y
+CONFIG_CPU_PXA320=y
+CONFIG_CPU_PXA930=y
+CONFIG_CPU_PXA935=y
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
+# CONFIG_MACH_STARGATE2 is not set
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_VIPER is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_H5000 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_EXEDA is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_COLIBRI300 is not set
+# CONFIG_MACH_COLIBRI320 is not set
+CONFIG_MACH_ZYLONITE=y
+CONFIG_MACH_LITTLETON=y
+CONFIG_MACH_TAVOREVB=y
+CONFIG_MACH_SAAR=y
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_CM_X300 is not set
+# CONFIG_MACH_H4700 is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_HIMALAYA is not set
+# CONFIG_MACH_MIOA701 is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_MACH_CSB726 is not set
+# CONFIG_PXA_EZX is not set
+CONFIG_PXA3xx=y
+CONFIG_PXA_SSP=y
+CONFIG_PXA_HAVE_BOARD_IRQS=y
+CONFIG_PLAT_PXA=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSC3=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_IO_36=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_XSC3L2=y
+CONFIG_IWMMXT=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=64M debug"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_H1900 is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_SHARPSL is not set
+CONFIG_MTD_NAND_PXA3xx=y
+CONFIG_MTD_NAND_PXA3xx_BUILTIN=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_ONENAND=y
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_ONENAND_GENERIC=y
+# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+CONFIG_KEYBOARD_PXA27x=y
+CONFIG_KEYBOARD_PXA930_ROTARY=y
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+CONFIG_MOUSE_PXA930_TRKBALL=y
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+CONFIG_TOUCHSCREEN_DA9034=y
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+# CONFIG_I2C_HELPER_AUTO is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_PXA2XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+CONFIG_GPIO_MAX732X=y
+CONFIG_GPIO_PCA953X=y
+CONFIG_GPIO_PCF857X=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+CONFIG_GPIO_MAX7301=y
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=y
+CONFIG_POWER_SUPPLY_DEBUG=y
+CONFIG_PDA_POWER=y
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+CONFIG_BATTERY_DA9030=y
+# CONFIG_BATTERY_MAX17040 is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+CONFIG_PMIC_DA903X=y
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_OVERLAY is not set
+# CONFIG_FB_PXA_SMARTPANEL is not set
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_W100 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+CONFIG_LCD_TDO24M=y
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_PWM=y
+CONFIG_BACKLIGHT_DA903X=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+CONFIG_FONT_6x11=y
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_PXA=y
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_PCA955X is not set
+CONFIG_LEDS_DA903X=m
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_PWM is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_GPIO=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_DEBUG=y
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_DA903X=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_FS_WBUF_VERIFY=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y

arch/arm/configs/xcep_defconfig

@@ -0,0 +1,1129 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc6
+# Thu Aug 20 09:02:37 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=".xcep-itech"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+# CONFIG_UID16 is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+# CONFIG_SHMEM is not set
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+# CONFIG_SLUB is not set
+CONFIG_SLOB=y
+# CONFIG_PROFILING is not set
+CONFIG_TRACEPOINTS=y
+CONFIG_MARKERS=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLOCK is not set
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
+# CONFIG_MACH_STARGATE2 is not set
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_VIPER is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_H5000 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_EXEDA is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_COLIBRI300 is not set
+# CONFIG_MACH_COLIBRI320 is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_CM_X300 is not set
+# CONFIG_MACH_H4700 is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_HIMALAYA is not set
+# CONFIG_MACH_MIOA701 is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_MACH_CSB726 is not set
+# CONFIG_PXA_EZX is not set
+CONFIG_MACH_XCEP=y
+CONFIG_PXA25x=y
+CONFIG_PXA_SSP=y
+CONFIG_PLAT_PXA=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=mtd4 rootfstype=jffs2 ro console=ttyS0,115200"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=m
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+CONFIG_MTD_PXA2XX=y
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+
+#
+# SCSI device support
+#
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PXA=m
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=m
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+CONFIG_SENSORS_ADM1021=m
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+CONFIG_SENSORS_MAX6650=m
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=m
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SA1100=m
+# CONFIG_RTC_DRV_PXA is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_FILE_LOCKING=y
+# CONFIG_FSNOTIFY is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_FS_WBUF_VERIFY=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="utf8"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_ARM_UNWIND is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH2=m
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y

arch/arm/configs/zylonite_defconfig

@@ -1,736 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Tue Oct 23 13:33:20 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=18
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-
-#
-# Supported PXA3xx Processor Variants
-#
-CONFIG_CPU_PXA300=y
-CONFIG_CPU_PXA310=y
-CONFIG_CPU_PXA320=y
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_EM_X270 is not set
-CONFIG_MACH_ZYLONITE=y
-# CONFIG_MACH_ARMCORE is not set
-CONFIG_PXA3xx=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSC3=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_IO_36=y
-
-#
-# Processor Features
-#
-# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfs/rootfs/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS0,38400 mem=64M debug"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-CONFIG_FONT_6x11=y
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_SAMPLES is not set
-CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y

arch/arm/include/asm/atomic.h

@@ -19,31 +19,21 @@
 
 #ifdef __KERNEL__
 
+/*
+ * On ARM, ordinary assignment (str instruction) doesn't clear the local
+ * strex/ldrex monitor on some implementations. The reason we can use it for
+ * atomic_set() is the clrex or dummy strex done on every exception return.
+ */
 #define atomic_read(v)	((v)->counter)
+#define atomic_set(v,i)	(((v)->counter) = (i))
 
 #if __LINUX_ARM_ARCH__ >= 6
 
 /*
  * ARMv6 UP and SMP safe atomic ops.  We use load exclusive and
  * store exclusive to ensure that these are atomic.  We may loop
- * to ensure that the update happens.  Writing to 'v->counter'
- * without using the following operations WILL break the atomic
- * nature of these ops.
+ * to ensure that the update happens.
  */
-static inline void atomic_set(atomic_t *v, int i)
-{
-	unsigned long tmp;
-
-	__asm__ __volatile__("@ atomic_set\n"
-"1:	ldrex	%0, [%1]\n"
-"	strex	%0, %2, [%1]\n"
-"	teq	%0, #0\n"
-"	bne	1b"
-	: "=&r" (tmp)
-	: "r" (&v->counter), "r" (i)
-	: "cc");
-}
-
 static inline void atomic_add(int i, atomic_t *v)
 {
 	unsigned long tmp;
@@ -163,8 +153,6 @@ static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
 #error SMP not supported on pre-ARMv6 CPUs
 #endif
 
-#define atomic_set(v,i)	(((v)->counter) = (i))
-
 static inline int atomic_add_return(int i, atomic_t *v)
 {
 	unsigned long flags;

arch/arm/include/asm/bitops.h

@@ -84,7 +84,7 @@ ____atomic_test_and_set_bit(unsigned int bit, volatile unsigned long *p)
 	*p = res | mask;
 	raw_local_irq_restore(flags);
 
-	return res & mask;
+	return (res & mask) != 0;
 }
 
 static inline int
@@ -101,7 +101,7 @@ ____atomic_test_and_clear_bit(unsigned int bit, volatile unsigned long *p)
 	*p = res & ~mask;
 	raw_local_irq_restore(flags);
 
-	return res & mask;
+	return (res & mask) != 0;
 }
 
 static inline int
@@ -118,7 +118,7 @@ ____atomic_test_and_change_bit(unsigned int bit, volatile unsigned long *p)
 	*p = res ^ mask;
 	raw_local_irq_restore(flags);
 
-	return res & mask;
+	return (res & mask) != 0;
 }
 
 #include <asm-generic/bitops/non-atomic.h>

arch/arm/include/asm/cache.h

@@ -4,7 +4,7 @@
 #ifndef __ASMARM_CACHE_H
 #define __ASMARM_CACHE_H
 
-#define L1_CACHE_SHIFT		5
+#define L1_CACHE_SHIFT		CONFIG_ARM_L1_CACHE_SHIFT
 #define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
 
 /*

arch/arm/include/asm/cacheflush.h

@@ -334,14 +334,14 @@ static inline void outer_flush_range(unsigned long start, unsigned long end)
 #ifndef CONFIG_CPU_CACHE_VIPT
 static inline void flush_cache_mm(struct mm_struct *mm)
 {
-	if (cpu_isset(smp_processor_id(), mm->cpu_vm_mask))
+	if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm)))
 		__cpuc_flush_user_all();
 }
 
 static inline void
 flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end)
 {
-	if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask))
+	if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm)))
 		__cpuc_flush_user_range(start & PAGE_MASK, PAGE_ALIGN(end),
 					vma->vm_flags);
 }
@@ -349,7 +349,7 @@ flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long
 static inline void
 flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn)
 {
-	if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
+	if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
 		unsigned long addr = user_addr & PAGE_MASK;
 		__cpuc_flush_user_range(addr, addr + PAGE_SIZE, vma->vm_flags);
 	}
@@ -360,7 +360,7 @@ flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
 			 unsigned long uaddr, void *kaddr,
 			 unsigned long len, int write)
 {
-	if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
+	if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
 		unsigned long addr = (unsigned long)kaddr;
 		__cpuc_coherent_kern_range(addr, addr + len);
 	}

arch/arm/include/asm/cputype.h

@@ -63,6 +63,11 @@ static inline unsigned int __attribute_const__ read_cpuid_cachetype(void)
 	return read_cpuid(CPUID_CACHETYPE);
 }
 
+static inline unsigned int __attribute_const__ read_cpuid_tcmstatus(void)
+{
+	return read_cpuid(CPUID_TCM);
+}
+
 /*
  * Intel's XScale3 core supports some v6 features (supersections, L2)
  * but advertises itself as v5 as it does not support the v6 ISA.  For
@@ -73,7 +78,10 @@ static inline unsigned int __attribute_const__ read_cpuid_cachetype(void)
 #else
 static inline int cpu_is_xsc3(void)
 {
-	if ((read_cpuid_id() & 0xffffe000) == 0x69056000)
+	unsigned int id;
+	id = read_cpuid_id() & 0xffffe000;
+	/* It covers both Intel ID and Marvell ID */
+	if ((id == 0x69056000) || (id == 0x56056000))
 		return 1;
 
 	return 0;

arch/arm/include/asm/glue.h

@@ -120,25 +120,39 @@
 #endif
 
 /*
- * Prefetch abort handler.  If the CPU has an IFAR use that, otherwise
- * use the address of the aborted instruction
+ *	Prefetch Abort Model
+ *	================
+ *
+ *	We have the following to choose from:
+ *	  legacy	- no IFSR, no IFAR
+ *	  v6		- ARMv6: IFSR, no IFAR
+ *	  v7		- ARMv7: IFSR and IFAR
  */
+
 #undef CPU_PABORT_HANDLER
 #undef MULTI_PABORT
 
-#ifdef CONFIG_CPU_PABRT_IFAR
+#ifdef CONFIG_CPU_PABRT_LEGACY
+# ifdef CPU_PABORT_HANDLER
+#  define MULTI_PABORT 1
+# else
+#  define CPU_PABORT_HANDLER legacy_pabort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_PABRT_V6
 # ifdef CPU_PABORT_HANDLER
 #  define MULTI_PABORT 1
 # else
-#  define CPU_PABORT_HANDLER(reg, insn)	mrc p15, 0, reg, cr6, cr0, 2
+#  define CPU_PABORT_HANDLER v6_pabort
 # endif
 #endif
 
-#ifdef CONFIG_CPU_PABRT_NOIFAR
+#ifdef CONFIG_CPU_PABRT_V7
 # ifdef CPU_PABORT_HANDLER
 #  define MULTI_PABORT 1
 # else
-#  define CPU_PABORT_HANDLER(reg, insn)	mov reg, insn
+#  define CPU_PABORT_HANDLER v7_pabort
 # endif
 #endif
 

arch/arm/include/asm/hardware/iop3xx-adma.h

@@ -187,11 +187,74 @@ union iop3xx_desc {
 	void *ptr;
 };
 
+/* No support for p+q operations */
+static inline int
+iop_chan_pq_slot_count(size_t len, int src_cnt, int *slots_per_op)
+{
+	BUG();
+	return 0;
+}
+
+static inline void
+iop_desc_init_pq(struct iop_adma_desc_slot *desc, int src_cnt,
+		  unsigned long flags)
+{
+	BUG();
+}
+
+static inline void
+iop_desc_set_pq_addr(struct iop_adma_desc_slot *desc, dma_addr_t *addr)
+{
+	BUG();
+}
+
+static inline void
+iop_desc_set_pq_src_addr(struct iop_adma_desc_slot *desc, int src_idx,
+			 dma_addr_t addr, unsigned char coef)
+{
+	BUG();
+}
+
+static inline int
+iop_chan_pq_zero_sum_slot_count(size_t len, int src_cnt, int *slots_per_op)
+{
+	BUG();
+	return 0;
+}
+
+static inline void
+iop_desc_init_pq_zero_sum(struct iop_adma_desc_slot *desc, int src_cnt,
+			  unsigned long flags)
+{
+	BUG();
+}
+
+static inline void
+iop_desc_set_pq_zero_sum_byte_count(struct iop_adma_desc_slot *desc, u32 len)
+{
+	BUG();
+}
+
+#define iop_desc_set_pq_zero_sum_src_addr iop_desc_set_pq_src_addr
+
+static inline void
+iop_desc_set_pq_zero_sum_addr(struct iop_adma_desc_slot *desc, int pq_idx,
+			      dma_addr_t *src)
+{
+	BUG();
+}
+
 static inline int iop_adma_get_max_xor(void)
 {
 	return 32;
 }
 
+static inline int iop_adma_get_max_pq(void)
+{
+	BUG();
+	return 0;
+}
+
 static inline u32 iop_chan_get_current_descriptor(struct iop_adma_chan *chan)
 {
 	int id = chan->device->id;
@@ -332,6 +395,11 @@ static inline int iop_chan_zero_sum_slot_count(size_t len, int src_cnt,
 	return slot_cnt;
 }
 
+static inline int iop_desc_is_pq(struct iop_adma_desc_slot *desc)
+{
+	return 0;
+}
+
 static inline u32 iop_desc_get_dest_addr(struct iop_adma_desc_slot *desc,
 					struct iop_adma_chan *chan)
 {
@@ -349,6 +417,14 @@ static inline u32 iop_desc_get_dest_addr(struct iop_adma_desc_slot *desc,
 	return 0;
 }
 
+
+static inline u32 iop_desc_get_qdest_addr(struct iop_adma_desc_slot *desc,
+					  struct iop_adma_chan *chan)
+{
+	BUG();
+	return 0;
+}
+
 static inline u32 iop_desc_get_byte_count(struct iop_adma_desc_slot *desc,
 					struct iop_adma_chan *chan)
 {
@@ -756,13 +832,14 @@ static inline void iop_desc_set_block_fill_val(struct iop_adma_desc_slot *desc,
 	hw_desc->src[0] = val;
 }
 
-static inline int iop_desc_get_zero_result(struct iop_adma_desc_slot *desc)
+static inline enum sum_check_flags
+iop_desc_get_zero_result(struct iop_adma_desc_slot *desc)
 {
 	struct iop3xx_desc_aau *hw_desc = desc->hw_desc;
 	struct iop3xx_aau_desc_ctrl desc_ctrl = hw_desc->desc_ctrl_field;
 
 	iop_paranoia(!(desc_ctrl.tx_complete && desc_ctrl.zero_result_en));
-	return desc_ctrl.zero_result_err;
+	return desc_ctrl.zero_result_err << SUM_CHECK_P;
 }
 
 static inline void iop_chan_append(struct iop_adma_chan *chan)

arch/arm/include/asm/hardware/iop3xx.h

@@ -215,6 +215,7 @@ extern int iop3xx_get_init_atu(void);
  * IOP3XX I/O and Mem space regions for PCI autoconfiguration
  */
 #define IOP3XX_PCI_LOWER_MEM_PA	0x80000000
+#define IOP3XX_PCI_MEM_WINDOW_SIZE	0x08000000
 
 #define IOP3XX_PCI_IO_WINDOW_SIZE	0x00010000
 #define IOP3XX_PCI_LOWER_IO_PA		0x90000000

arch/arm/include/asm/hardware/iop_adma.h

@@ -86,6 +86,7 @@ struct iop_adma_chan {
  * @idx: pool index
  * @unmap_src_cnt: number of xor sources
  * @unmap_len: transaction bytecount
+ * @tx_list: list of descriptors that are associated with one operation
  * @async_tx: support for the async_tx api
  * @group_list: list of slots that make up a multi-descriptor transaction
  *	for example transfer lengths larger than the supported hw max
@@ -102,10 +103,12 @@ struct iop_adma_desc_slot {
 	u16 idx;
 	u16 unmap_src_cnt;
 	size_t unmap_len;
+	struct list_head tx_list;
 	struct dma_async_tx_descriptor async_tx;
 	union {
 		u32 *xor_check_result;
 		u32 *crc32_result;
+		u32 *pq_check_result;
 	};
 };
 

arch/arm/include/asm/mmu_context.h

@@ -103,14 +103,15 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next,
 
 #ifdef CONFIG_SMP
 	/* check for possible thread migration */
-	if (!cpus_empty(next->cpu_vm_mask) && !cpu_isset(cpu, next->cpu_vm_mask))
+	if (!cpumask_empty(mm_cpumask(next)) &&
+	    !cpumask_test_cpu(cpu, mm_cpumask(next)))
 		__flush_icache_all();
 #endif
-	if (!cpu_test_and_set(cpu, next->cpu_vm_mask) || prev != next) {
+	if (!cpumask_test_and_set_cpu(cpu, mm_cpumask(next)) || prev != next) {
 		check_context(next);
 		cpu_switch_mm(next->pgd, next);
 		if (cache_is_vivt())
-			cpu_clear(cpu, prev->cpu_vm_mask);
+			cpumask_clear_cpu(cpu, mm_cpumask(prev));
 	}
 #endif
 }

arch/arm/include/asm/smp.h

@@ -93,7 +93,6 @@ extern void platform_cpu_enable(unsigned int cpu);
 
 extern void arch_send_call_function_single_ipi(int cpu);
 extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
-#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask
 
 /*
  * show local interrupt info

arch/arm/include/asm/smp_plat.h

@@ -0,0 +1,16 @@
+/*
+ * ARM specific SMP header, this contains our implementation
+ * details.
+ */
+#ifndef __ASMARM_SMP_PLAT_H
+#define __ASMARM_SMP_PLAT_H
+
+#include <asm/cputype.h>
+
+/* all SMP configurations have the extended CPUID registers */
+static inline int tlb_ops_need_broadcast(void)
+{
+	return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 2;
+}
+
+#endif

arch/arm/include/asm/tcm.h

@@ -0,0 +1,31 @@
+/*
+ *
+ * Copyright (C) 2008-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * Author: Rickard Andersson <rickard.andersson@stericsson.com>
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ *
+ */
+#ifndef __ASMARM_TCM_H
+#define __ASMARM_TCM_H
+
+#ifndef CONFIG_HAVE_TCM
+#error "You should not be including tcm.h unless you have a TCM!"
+#endif
+
+#include <linux/compiler.h>
+
+/* Tag variables with this */
+#define __tcmdata __section(.tcm.data)
+/* Tag constants with this */
+#define __tcmconst __section(.tcm.rodata)
+/* Tag functions inside TCM called from outside TCM with this */
+#define __tcmfunc __attribute__((long_call)) __section(.tcm.text) noinline
+/* Tag function inside TCM called from inside TCM  with this */
+#define __tcmlocalfunc __section(.tcm.text)
+
+void *tcm_alloc(size_t len);
+void tcm_free(void *addr, size_t len);
+
+#endif

arch/arm/include/asm/tlbflush.h

@@ -350,7 +350,7 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm)
 	if (tlb_flag(TLB_WB))
 		dsb();
 
-	if (cpu_isset(smp_processor_id(), mm->cpu_vm_mask)) {
+	if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm))) {
 		if (tlb_flag(TLB_V3_FULL))
 			asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (zero) : "cc");
 		if (tlb_flag(TLB_V4_U_FULL))
@@ -388,7 +388,7 @@ local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
 	if (tlb_flag(TLB_WB))
 		dsb();
 
-	if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
+	if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
 		if (tlb_flag(TLB_V3_PAGE))
 			asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (uaddr) : "cc");
 		if (tlb_flag(TLB_V4_U_PAGE))

arch/arm/include/asm/unified.h

@@ -35,7 +35,9 @@
 
 #define ARM(x...)
 #define THUMB(x...)	x
+#ifdef __ASSEMBLY__
 #define W(instr)	instr.w
+#endif
 #define BSYM(sym)	sym + 1
 
 #else	/* !CONFIG_THUMB2_KERNEL */
@@ -45,7 +47,9 @@
 
 #define ARM(x...)	x
 #define THUMB(x...)
+#ifdef __ASSEMBLY__
 #define W(instr)	instr
+#endif
 #define BSYM(sym)	sym
 
 #endif	/* CONFIG_THUMB2_KERNEL */

arch/arm/include/asm/unistd.h

@@ -456,6 +456,7 @@
  * Unimplemented (or alternatively implemented) syscalls
  */
 #define __IGNORE_fadvise64_64		1
+#define __IGNORE_migrate_pages		1
 
 #endif /* __KERNEL__ */
 #endif /* __ASM_ARM_UNISTD_H */

arch/arm/kernel/Makefile

@@ -2,7 +2,8 @@
 # Makefile for the linux kernel.
 #
 
-AFLAGS_head.o := -DTEXT_OFFSET=$(TEXT_OFFSET)
+CPPFLAGS_vmlinux.lds := -DTEXT_OFFSET=$(TEXT_OFFSET)
+AFLAGS_head.o        := -DTEXT_OFFSET=$(TEXT_OFFSET)
 
 ifdef CONFIG_DYNAMIC_FTRACE
 CFLAGS_REMOVE_ftrace.o = -pg
@@ -34,6 +35,7 @@ obj-$(CONFIG_OABI_COMPAT)	+= sys_oabi-compat.o
 obj-$(CONFIG_ARM_THUMBEE)	+= thumbee.o
 obj-$(CONFIG_KGDB)		+= kgdb.o
 obj-$(CONFIG_ARM_UNWIND)	+= unwind.o
+obj-$(CONFIG_HAVE_TCM)		+= tcm.o
 
 obj-$(CONFIG_CRUNCH)		+= crunch.o crunch-bits.o
 AFLAGS_crunch-bits.o		:= -Wa,-mcpu=ep9312

arch/arm/kernel/entry-armv.S

@@ -272,7 +272,15 @@ __und_svc:
 	@
 	@  r0 - instruction
 	@
+#ifndef	CONFIG_THUMB2_KERNEL
 	ldr	r0, [r2, #-4]
+#else
+	ldrh	r0, [r2, #-2]			@ Thumb instruction at LR - 2
+	and	r9, r0, #0xf800
+	cmp	r9, #0xe800			@ 32-bit instruction if xx >= 0
+	ldrhhs	r9, [r2]			@ bottom 16 bits
+	orrhs	r0, r9, r0, lsl #16
+#endif
 	adr	r9, BSYM(1f)
 	bl	call_fpe
 
@@ -303,22 +311,16 @@ __pabt_svc:
 	tst	r3, #PSR_I_BIT
 	biceq	r9, r9, #PSR_I_BIT
 
-	@
-	@ set args, then call main handler
-	@
-	@  r0 - address of faulting instruction
-	@  r1 - pointer to registers on stack
-	@
-#ifdef MULTI_PABORT
 	mov	r0, r2			@ pass address of aborted instruction.
+#ifdef MULTI_PABORT
 	ldr	r4, .LCprocfns
 	mov	lr, pc
 	ldr	pc, [r4, #PROCESSOR_PABT_FUNC]
 #else
-	CPU_PABORT_HANDLER(r0, r2)
+	bl	CPU_PABORT_HANDLER
 #endif
 	msr	cpsr_c, r9			@ Maybe enable interrupts
-	mov	r1, sp				@ regs
+	mov	r2, sp				@ regs
 	bl	do_PrefetchAbort		@ call abort handler
 
 	@
@@ -678,7 +680,9 @@ ENTRY(fp_enter)
 	.word	no_fp
 	.previous
 
-no_fp:	mov	pc, lr
+ENTRY(no_fp)
+	mov	pc, lr
+ENDPROC(no_fp)
 
 __und_usr_unknown:
 	enable_irq
@@ -691,16 +695,16 @@ ENDPROC(__und_usr_unknown)
 __pabt_usr:
 	usr_entry
 
-#ifdef MULTI_PABORT
 	mov	r0, r2			@ pass address of aborted instruction.
+#ifdef MULTI_PABORT
 	ldr	r4, .LCprocfns
 	mov	lr, pc
 	ldr	pc, [r4, #PROCESSOR_PABT_FUNC]
 #else
-	CPU_PABORT_HANDLER(r0, r2)
+	bl	CPU_PABORT_HANDLER
 #endif
 	enable_irq				@ Enable interrupts
-	mov	r1, sp				@ regs
+	mov	r2, sp				@ regs
 	bl	do_PrefetchAbort		@ call abort handler
  UNWIND(.fnend		)
 	/* fall through */
@@ -734,13 +738,6 @@ ENTRY(__switch_to)
 #ifdef CONFIG_MMU
 	ldr	r6, [r2, #TI_CPU_DOMAIN]
 #endif
-#if __LINUX_ARM_ARCH__ >= 6
-#ifdef CONFIG_CPU_32v6K
-	clrex
-#else
-	strex	r5, r4, [ip]			@ Clear exclusive monitor
-#endif
-#endif
 #if defined(CONFIG_HAS_TLS_REG)
 	mcr	p15, 0, r3, c13, c0, 3		@ set TLS register
 #elif !defined(CONFIG_TLS_REG_EMUL)

arch/arm/kernel/entry-common.S

@@ -126,7 +126,7 @@ ENTRY(__gnu_mcount_nc)
 	cmp r0, r2
 	bne gnu_trace
 	ldmia sp!, {r0-r3, ip, lr}
-	bx ip
+	mov pc, ip
 
 gnu_trace:
 	ldr r1, [sp, #20]			@ lr of instrumented routine
@@ -135,7 +135,7 @@ gnu_trace:
 	mov lr, pc
 	mov pc, r2
 	ldmia sp!, {r0-r3, ip, lr}
-	bx ip
+	mov pc, ip
 
 ENTRY(mcount)
 	stmdb sp!, {r0-r3, lr}
@@ -425,13 +425,6 @@ sys_mmap2:
 #endif
 ENDPROC(sys_mmap2)
 
-ENTRY(pabort_ifar)
-		mrc	p15, 0, r0, cr6, cr0, 2
-ENTRY(pabort_noifar)
-		mov	pc, lr
-ENDPROC(pabort_ifar)
-ENDPROC(pabort_noifar)
-
 #ifdef CONFIG_OABI_COMPAT
 
 /*

arch/arm/kernel/entry-header.S

@@ -76,13 +76,27 @@
 #ifndef CONFIG_THUMB2_KERNEL
 	.macro	svc_exit, rpsr
 	msr	spsr_cxsf, \rpsr
+#if defined(CONFIG_CPU_32v6K)
+	clrex					@ clear the exclusive monitor
 	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
+#elif defined (CONFIG_CPU_V6)
+	ldr	r0, [sp]
+	strex	r1, r2, [sp]			@ clear the exclusive monitor
+	ldmib	sp, {r1 - pc}^			@ load r1 - pc, cpsr
+#else
+	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
+#endif
 	.endm
 
 	.macro	restore_user_regs, fast = 0, offset = 0
 	ldr	r1, [sp, #\offset + S_PSR]	@ get calling cpsr
 	ldr	lr, [sp, #\offset + S_PC]!	@ get pc
 	msr	spsr_cxsf, r1			@ save in spsr_svc
+#if defined(CONFIG_CPU_32v6K)
+	clrex					@ clear the exclusive monitor
+#elif defined (CONFIG_CPU_V6)
+	strex	r1, r2, [sp]			@ clear the exclusive monitor
+#endif
 	.if	\fast
 	ldmdb	sp, {r1 - lr}^			@ get calling r1 - lr
 	.else
@@ -98,6 +112,7 @@
 	.endm
 #else	/* CONFIG_THUMB2_KERNEL */
 	.macro	svc_exit, rpsr
+	clrex					@ clear the exclusive monitor
 	ldr	r0, [sp, #S_SP]			@ top of the stack
 	ldr	r1, [sp, #S_PC]			@ return address
 	tst	r0, #4				@ orig stack 8-byte aligned?
@@ -110,6 +125,7 @@
 	.endm
 
 	.macro	restore_user_regs, fast = 0, offset = 0
+	clrex					@ clear the exclusive monitor
 	mov	r2, sp
 	load_user_sp_lr r2, r3, \offset + S_SP	@ calling sp, lr
 	ldr	r1, [sp, #\offset + S_PSR]	@ get calling cpsr

arch/arm/kernel/head-common.S

@@ -13,6 +13,7 @@
 
 #define ATAG_CORE 0x54410001
 #define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2)
+#define ATAG_CORE_SIZE_EMPTY ((2*4) >> 2)
 
 	.align	2
 	.type	__switch_data, %object
@@ -251,7 +252,8 @@ __vet_atags:
 	bne	1f
 
 	ldr	r5, [r2, #0]			@ is first tag ATAG_CORE?
-	subs	r5, r5, #ATAG_CORE_SIZE
+	cmp	r5, #ATAG_CORE_SIZE
+	cmpne	r5, #ATAG_CORE_SIZE_EMPTY
 	bne	1f
 	ldr	r5, [r2, #4]
 	ldr	r6, =ATAG_CORE

arch/arm/kernel/init_task.c

@@ -24,9 +24,8 @@ static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
  *
  * The things we do for performance..
  */
-union thread_union init_thread_union
-	__attribute__((__section__(".data.init_task"))) =
-		{ INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+	{ INIT_THREAD_INFO(init_task) };
 
 /*
  * Initial task structure.

arch/arm/kernel/kprobes.c

@@ -22,6 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/kprobes.h>
 #include <linux/module.h>
+#include <linux/stop_machine.h>
 #include <linux/stringify.h>
 #include <asm/traps.h>
 #include <asm/cacheflush.h>
@@ -83,10 +84,24 @@ void __kprobes arch_arm_kprobe(struct kprobe *p)
 	flush_insns(p->addr, 1);
 }
 
+/*
+ * The actual disarming is done here on each CPU and synchronized using
+ * stop_machine. This synchronization is necessary on SMP to avoid removing
+ * a probe between the moment the 'Undefined Instruction' exception is raised
+ * and the moment the exception handler reads the faulting instruction from
+ * memory.
+ */
+int __kprobes __arch_disarm_kprobe(void *p)
+{
+	struct kprobe *kp = p;
+	*kp->addr = kp->opcode;
+	flush_insns(kp->addr, 1);
+	return 0;
+}
+
 void __kprobes arch_disarm_kprobe(struct kprobe *p)
 {
-	*p->addr = p->opcode;
-	flush_insns(p->addr, 1);
+	stop_machine(__arch_disarm_kprobe, p, &cpu_online_map);
 }
 
 void __kprobes arch_remove_kprobe(struct kprobe *p)

arch/arm/kernel/setup.c

@@ -45,6 +45,7 @@
 
 #include "compat.h"
 #include "atags.h"
+#include "tcm.h"
 
 #ifndef MEM_SIZE
 #define MEM_SIZE	(16*1024*1024)
@@ -749,6 +750,7 @@ void __init setup_arch(char **cmdline_p)
 #endif
 
 	cpu_init();
+	tcm_init();
 
 	/*
 	 * Set up various architecture-specific pointers

arch/arm/kernel/smp.c

@@ -36,6 +36,7 @@
 #include <asm/tlbflush.h>
 #include <asm/ptrace.h>
 #include <asm/localtimer.h>
+#include <asm/smp_plat.h>
 
 /*
  * as from 2.5, kernels no longer have an init_tasks structure
@@ -153,7 +154,7 @@ int __cpuinit __cpu_up(unsigned int cpu)
 /*
  * __cpu_disable runs on the processor to be shutdown.
  */
-int __cpuexit __cpu_disable(void)
+int __cpu_disable(void)
 {
 	unsigned int cpu = smp_processor_id();
 	struct task_struct *p;
@@ -189,7 +190,7 @@ int __cpuexit __cpu_disable(void)
 	read_lock(&tasklist_lock);
 	for_each_process(p) {
 		if (p->mm)
-			cpu_clear(cpu, p->mm->cpu_vm_mask);
+			cpumask_clear_cpu(cpu, mm_cpumask(p->mm));
 	}
 	read_unlock(&tasklist_lock);
 
@@ -200,7 +201,7 @@ int __cpuexit __cpu_disable(void)
  * called on the thread which is asking for a CPU to be shutdown -
  * waits until shutdown has completed, or it is timed out.
  */
-void __cpuexit __cpu_die(unsigned int cpu)
+void __cpu_die(unsigned int cpu)
 {
 	if (!platform_cpu_kill(cpu))
 		printk("CPU%u: unable to kill\n", cpu);
@@ -214,7 +215,7 @@ void __cpuexit __cpu_die(unsigned int cpu)
  * of the other hotplug-cpu capable cores, so presumably coming
  * out of idle fixes this.
  */
-void __cpuexit cpu_die(void)
+void __ref cpu_die(void)
 {
 	unsigned int cpu = smp_processor_id();
 
@@ -257,7 +258,7 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
 	atomic_inc(&mm->mm_users);
 	atomic_inc(&mm->mm_count);
 	current->active_mm = mm;
-	cpu_set(cpu, mm->cpu_vm_mask);
+	cpumask_set_cpu(cpu, mm_cpumask(mm));
 	cpu_switch_mm(mm->pgd, mm);
 	enter_lazy_tlb(mm, current);
 	local_flush_tlb_all();
@@ -586,12 +587,6 @@ struct tlb_args {
 	unsigned long ta_end;
 };
 
-/* all SMP configurations have the extended CPUID registers */
-static inline int tlb_ops_need_broadcast(void)
-{
-	return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 2;
-}
-
 static inline void ipi_flush_tlb_all(void *ignored)
 {
 	local_flush_tlb_all();
@@ -643,7 +638,7 @@ void flush_tlb_all(void)
 void flush_tlb_mm(struct mm_struct *mm)
 {
 	if (tlb_ops_need_broadcast())
-		on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, &mm->cpu_vm_mask);
+		on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, mm_cpumask(mm));
 	else
 		local_flush_tlb_mm(mm);
 }
@@ -654,7 +649,7 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
 		struct tlb_args ta;
 		ta.ta_vma = vma;
 		ta.ta_start = uaddr;
-		on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, &vma->vm_mm->cpu_vm_mask);
+		on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, mm_cpumask(vma->vm_mm));
 	} else
 		local_flush_tlb_page(vma, uaddr);
 }
@@ -677,7 +672,7 @@ void flush_tlb_range(struct vm_area_struct *vma,
 		ta.ta_vma = vma;
 		ta.ta_start = start;
 		ta.ta_end = end;
-		on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, &vma->vm_mm->cpu_vm_mask);
+		on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, mm_cpumask(vma->vm_mm));
 	} else
 		local_flush_tlb_range(vma, start, end);
 }

arch/arm/kernel/smp_twd.c

@@ -166,10 +166,12 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk)
 	clockevents_register_device(clk);
 }
 
+#ifdef CONFIG_HOTPLUG_CPU
 /*
  * take a local timer down
  */
-void __cpuexit twd_timer_stop(void)
+void twd_timer_stop(void)
 {
 	__raw_writel(0, twd_base + TWD_TIMER_CONTROL);
 }
+#endif